hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.12 Acknowledged Mode/ Downlink TBF/ Decoding of Coding Schemes | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.12.1 Conformance requirements | 1. In EGPRS TBF mode, the transfer of RLC Data Blocks in the acknowledged RLC/MAC mode can be controlled by a selective type I ARQ mechanism, or by type II hybrid ARQ (Incremental Redundancy: IR) mechanism, coupled with the numbering of the RLC Data Blocks within one Temporary Block Flow.
2. According to the link quali... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.12.2 Test purpose | To verify that the mobile station correctly decode RLC data blocks sent using different coding schemes (MCS-1 to MCS-9). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.12.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The SS establishes a Downlink E... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.13 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.14 Acknowledged Mode/ Downlink TBF/ Received Bitmap/ Compressed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.14.1 Conformance requirements | 1. A Full Received Bitmap (FRB) is built from the receive state array V(N) by extracting the part between V(Q) and V(R) similar to the GPRS case.
2. From the FRB, a reported bitmap (RB) shall then be generated. The FRB shall be recalculated before each RB is generated. For downlink TBFs, the network may order the MS to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.14.2 Test purpose | 1. To verify the Compression Bit is set to '1' when compressed RB is sent.
2. To verify that if the compressed reported bitmap covers more blocks than the uncompressed reported bitmap, and the FRB length is larger than the RB size, the receiver shall send the compressed reported bitmap. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.14.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- EGPRS Multislotclass (TSPC_Type_EGPRS_Multislot_ClassX where X = ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.15 Acknowledged Mode/ Downlink TBF/ Received Bitmap/ Uncompressed | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.15.1 Conformance requirements | 1. A Full Received Bitmap (FRB) is built from the receive state array V(N) by extracting the part between V(Q) and V(R) similar to the GPRS case.
2. From the FRB, a reported bitmap (RB) shall then be generated. The FRB shall be recalculated before each RB is generated. For downlink TBFs, the network may order the MS to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.15.2 Test purpose | 1. To verify the Compression Bit is set to '0' when uncompressed RB is sent.
2. To verify that if the compressed reported bitmap does not covers more blocks than the uncompressed reported bitmap, the receiver shall send the uncompressed reported bitmap.
53.1.2.15.3 Method of test
Initial Conditions
System Simulator:
1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.16 Acknowledged Mode/ Downlink TBF/ Received Block Bitmap/ Compressed Bitmap Starting Colour Code | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.16.1 Conformance requirements | 1. In RB compression, no special code words are used either at the beginning of the bitmap or the end of a bitmap. A one bit indicator (i.e., Compressed Bitmap Starting Colour Code) is used to indicate whether the compressed bitmap starts with a run length of zeros or a run length of ones.
References
3GPP TS 04.60, sub... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.16.2 Test purpose | 1. To verify the correct coding of Compressed Bitmap Starting Colour Code bit field in Packet Downlink ACK/NACK. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.16.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
SS initiates the establishment ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.17 Acknowledged Mode/ Downlink TBF/ Received Block Bitmap/ Terminating Code and Make-up Code | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.17.1 Conformance requirements | 1. The T.4 procedure for encoding run lengths is as follows. Runs of ones and zeros alternate, and the run lengths are represented by the code words listed in the tables below. The code words for run lengths of zeros and ones are as described in T.4 except for one minor modification: the terminating code words used for... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.17.2 Test purpose | 1. To verify that run lengths in the range 0-63 bits are encoded with their appropriate terminating code word.
2. To verify the correct use of make-up code word for run lengths in the range 64 and above. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.17.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- EGPRS Multislotclass (TSPC_Type_EGPRS_Multislot_ClassX where X = ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.18 Acknowledged Mode/ Downlink TBF/ Retransmission/ Padding | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.18.1 Conformance requirements | According to the link quality, an initial Modulation and Coding Scheme (MCS) is selected for an RLC block (see note). For the retransmissions, the same or another MCS from the same family of MCSs may be selected. E.g. if MCS-7 is selected for the first transmission of an RLC block, any MCS of the family B may be used f... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.18.2 Test purpose | 1. To verify that the MS correctly decodes the CPS field of Downlink Egprs RLC Data Block header.
2. To verify that the MS correctly decodes a retransmitted data block which contains first six octets of padding. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.18.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
- EGPRS Multislotclass (TSPC_Type_EGPRS_Multislot_ClassX where X = ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.19 Acknowledged Mode/ Downlink TBF/ TBF Reallocation/Window Size | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.19.1 Conformance requirements | For EGPRS the window size (WS) shall be set by the network according to the number of timeslots allocated in the direction of the TBF (uplink or downlink). The allowed window sizes are given in Table 9.1.9.2.1.
MS shall support the maximum window size corresponding to its multislot capability.The selected WS shall be i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.19.2 Test purpose | To verify that if a downlink TBF is reallocated reducing the number of timeslots so that the RLC window size becomes larger than the maximum window size for the new resources, the MS retains the old window size. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.1.2.19.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
SS establishes a downlink TBF allocating two times... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2 Unacknowledged Mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1 Unacknowledged Mode/ Uplink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.1 Unacknowledged Mode/ Uplink TBF/ Stall Indicator | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.1.1 Conformance requirements | The transfer of RLC data blocks in the RLC unacknowledged mode does not include any retransmissions, except during the release of an uplink TBF where the last transmitted uplink block may be retransmitted (see sub-clause 9.3.3.3).
The network shall send PACKET UPLINK ACK/NACK messages when needed.
The mobile station sh... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.1.2 Test purpose | To verify that the MS sets SI to ‘0’ in all RLC data blocks |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context3 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
An uplink TBF in unacknowledged... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.2 Unacknowledged Mode/ Uplink TBF/ RBB and SSN | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.2.1 Conformance requirements | The transfer of RLC data blocks in the RLC unacknowledged mode does not include any retransmissions, except during the release of an uplink TBF where the last transmitted uplink block may be retransmitted (see sub-clause 9.3.3.3).
The SSN and RB are transmitted in both RLC acknowledged and RLC unacknowledged mode (note... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.2.2 Test purpose | To verify that the MS ignores SSN and RB included in Packet Uplink Ack/Nack message when in RLC unacknowledged mode. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context3 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
An uplink TBF in unacknowledged... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.2 Unacknowledged Mode/ Downlink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.2.1 Unacknowledged Mode/ Downlink TBF/ V(R) and V(Q) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.2.1.1 Conformance requirements | In RLC unacknowledged mode, all values of BSN are within the transmit window.
In RLC unacknowledged mode, V(R) shall be set to [ BSN' + 1 ] modulo SNS, where BSN' is the BSN of most recently received RLC data block.
In RLC unacknowledged mode, if [V(R) - V(Q)] modulo SNS > WS after updating V(R), then V(Q) is set to [V... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.2.1.2 Test purpose | To verify that in RLC unacknowledged mode, the MS correctly sets V(R) and V(Q) depending upon the BSN of the data block received. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.2.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context3 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The SS initiates the establishm... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.3 Default Message Contents and Macros | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.3.1 Message Contents | none |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.3.2 Macros | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.3.2.1 Macro for uplink dynamic allocation two phase access | Step
Direction
Message
Comments
{Uplink dynamic allocation two phase access}
Macro parameters:
N: the number of data octets to be transferred,
USF_GRANULARITY: 1 or 4 blocks,
RLC_DATA_BLOCKS_GRANTED: 9-261 (close-end) or absent (open-end),
EGPRS Channel Coding Command: MCS-1, -2, -3, -4, -5, -6, -6, -7, -8, -9 or MCS-5... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.3.2.2 Macro for downlink TBF establishment (PBCCH not present) | Step
Direction
Message
Comments
{Downlink TBF establishment}
Macro parameters:
TBF_STARTING_TIME
1
SS -> MS
PAGING REQUEST
Page info contains P-TMSI of the MS. Sent on PCH.
2
MS -> SS
CHANNEL REQUEST
ACCESS TYPE = "One phase packet access". Received on RACH.
3
SS -> MS
IMMEDIATE ASSIGNMENT
Random Reference = pertaining... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 53.3.2.3 Macro for downlink TBF establishment using ACCESS TYPE = "signalling" (PBCCH not present) | The following table describes a signalling sequence performing a downlink TBF establishment procedure.
The macros in the test cases refer to the table below starting at the step required for the particular sequence.
These steps are only applicable to mobiles that support EGPRS Packet Channel Request with Establishment ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57 EGPRS Dual Transfer Mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1 Reallocation of CS resources | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.1 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.2 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.3 Intra frequency reallocation of CS resources / DTM Assignment Command | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.3.1 Conformance requirements | In dual transfer mode an intracell change of channel can be requested by upper layers for changing the channel type, or decided by the RR sub layer, e.g. for an internal handover or for the reallocation of all the resources of the mobile station. The purpose is to modify completely the physical channel configuration of... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.3.2 Test purpose | To verify that the MS can reallocate both the CS connection and PS resources to different timeslot(s) within the same frequency band, having received the DTM ASSIGNMENT COMMAND message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, DTM supported.
Mobile Station:
The MS is in the active state (U10) of a call.
The MS is in GMM Ready state with a P-TMSI allocated and the PDP context 1 activated.
Specific PICS statements
-
PIXIT statements
-
Test Procedure
Once the MS is in DTM, the SS attempts to modify t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.4 Inter frequency reallocation of CS resources / DTM Assignment Command | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.4.1 Conformance requirements | In dual transfer mode an intracell change of channel can be requested by upper layers for changing the channel type, or decided by the RR sub layer, e.g. for an internal handover or for the reallocation of all the resources of the mobile station. The purpose is to modify completely the physical channel configuration of... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.4.2 Test purpose | To verify that the MS, can reallocate both the CS connection and PS resources to a different frequency band, having received the DTM ASSIGNMENT COMMAND message while in DTM. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.1.4.3 Method of test | Initial Conditions
System Simulator:
1 cell, Cell A, with both TCH of cell activated and DTM supported. TCH2 allocated in a different frequency band and added to the Cell Channel Description in SI1.
Mobile Station:
The MS is in the active state (U10) of a call, on cell A, with a TMSI and P-TMSI allocated and the PDP co... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.2 Release of CS resources | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.2.1 Network originating CS release | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.2.1.1 Conformance requirements | When the MS is operating in DTM and RR connection release is requested by the network, the radio resources allocated on a PDCH are released, the MS returns to the PCCCH or CCCH configuration, packet idle mode. The MS shall abort the RR connection by initiating a normal release of the main signalling link, perform a loc... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.2.1.2 Test purpose | To verify that after the network releases the CS connection, the PS resources are correctly re-established |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 57.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, DTM supported.
Mobile Station:
The MS is in the active state (U10) of a call.
The MS is GPRS attached with a P-TMSI allocated and the PDP context 1 activated.
Specific PICS statements
-
PIXIT statements
-
Test Procedure
An MS, in dedicated mode, is triggered to initiate upli... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a Latency reductions | Default Initial conditions:
All default conditions, message contents and macros are defined in section 40 and section 50. If a mobile station indicates support of Reduced Latency, then an additional default initial condition used for Latred testcases in this clause is as follows. This condition is not necessary for a m... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1 FANR Fast Ack/Nack reporting | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.1 Uplink TBF, SSN based PAN Format | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.1.1 Conformance Requirements | 1. If a mobile station indicates support of Reduced Latency (see 3GPP TS 24.008), it may be assigned TBFs with FANR activated (see sub-clause 9.1.14), either in BTTI configuration or in RTTI configuration. If a mobile station indicates support of FANR (see 3GPP TS 24.008) and it does not indicate support of Reduced Lat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.1.2 Test Purposes | 1. To verify that the mobile station can establish an uplink TBF with FANR activated using the SSN based format.
2. To verify that the mobile station correctly interprets the contents of PAN fields received in downlink data blocks on downlink PDCHs which it is monitoring for USF for the uplink TBF.
3. To verify that t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.1.3 Method of Test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context 2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is triggered to transfe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.2 Uplink TBF, SSN based PAN Format, with Concurrent Downlink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.2.1 Conformance Requirements | 1. If a mobile station indicates support of Reduced Latency (see 3GPP TS 24.008), it may be assigned TBFs with FANR activated (see sub-clause 9.1.14), either in BTTI configuration or in RTTI configuration. If a mobile station indicates support of FANR (see 3GPP TS 24.008) and it does not indicate support of Reduced Lat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.2.2 Test Purposes | 1. To verify that the mobile station can operate a downlink TBF with FANR activated whilst an uplink TBF with FANR activated using the SSN based format is in operation.
2. To verify that the mobile station interprets PAN fields addressed to it via TFI when received in downlink data blocks not belonging to the MS's conc... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.2.3 Method of Test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context 2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is triggered to transfe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.3 Uplink TBF, Time based PAN Format | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.3.1 Conformance Requirements | 1. If a mobile station indicates support of Reduced Latency (see 3GPP TS 24.008), it may be assigned TBFs with FANR activated (see sub-clause 9.1.14), either in BTTI configuration or in RTTI configuration. If a mobile station indicates support of FANR (see 3GPP TS 24.008) and it does not indicate support of Reduced Lat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.3.2 Test Purposes | 1. To verify that the mobile station can establish an uplink TBF with FANR activated using the time based format.
2. To verify that the mobile station correctly interprets the contents of PAN fields received in downlink data blocks on downlink PDCHs which it is monitoring for USF for the uplink TBF. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.3.3 Method of Test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context 2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is triggered to transfe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.4 Uplink TBF, Time based PAN Format, with Concurrent Downlink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.4.1 Conformance Requirements | 1. If a mobile station indicates support of Reduced Latency (see 3GPP TS 24.008), it may be assigned TBFs with FANR activated (see sub-clause 9.1.14), either in BTTI configuration or in RTTI configuration. If a mobile station indicates support of FANR (see 3GPP TS 24.008), it may be assigned TBFs with FANR activated (s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.4.2 Test Purposes | 1. To verify that the mobile station can operate a downlink TBF with FANR activated whilst an uplink TBF with FANR activated using the time based format is in operation.
2. To verify that the mobile station interprets PAN fields from downlink data blocks belonging to it's own and other MS's downlink TBFs. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.4.3 Method of Test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context 2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is triggered to transfe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.5 Concurrent Uplink and Downlink TBFs, Discrimination of PAN Information from Different PDCH or PDCH Pairs | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.5.1 Conformance Requirements | 1. If an uplink TBF is established or reconfigured with FANR activated (see sub-clauses 11.2.29, 11.2.29a, 11.2.31, and 11.2.31a), the mobile station shall monitor for the presence of a PAN field for this TBF on all downlink PDCHs on which it shall monitor the USF for this TBF. The mobile station shall only attempt to ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.5.2 Test Purposes | 1. To verify that the mobile station only interprets PAN information received on a PDCH (BTTI configuration) or PDCH pairs (RTTI configuration) which it is required to monitor for USF for uplink TBF and ignores PAN information received on other downlink PDCH or PDCH pairs it may simultaneously be monitoring for downli... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.5.3 Method of Test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context 2 activated.
Specific PICS Statements
•
PIXIT Statements
-
Test Procedure
The MS is triggered to transfe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.6 Concurrent Uplink and Downlink TBFs, Mobile Coding and Puncturing Schemes | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.6.1 Conformance requirements | 1. The presence of the PAN field, is signalled by the PAN indicator bit in the RLC/MAC header. When this bit is set the receiver shall use the corresponding Puncturing Scheme variant of the CPS indicated in the RLC/MAC header to decode the RLC data field.
2. For an EGPRS TBF with FANR activated, a Radio Block for data ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.6.2 Test purpose | 1. To verify that mobile station uses the received PAN field correctly for different mobile coding and puncturing schemes.
2. To verify that the MS includes the PAN field in uplink data blocks coded using different commanded MCS when polled for PAN by the network.
3. To verify that initial transmission of RLC data bloc... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.6.3 Method of test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context3 activated.
Specific PICS Statements
- EGPRS capable of 8PSK in Uplink, of all Multislot classes (TSPC_Type_EGPRS_8PSK_uplink)
PIXI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.7 Concurrent Uplink and Downlink TBFs, Choice of MCS for Uplink Data Block Re-Transmission with PAN Field Present | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.7.1 Conformance Requirements | 1. For a TBF with FANR activated, if these rules require a retransmission in MCS-9 and a PAN field is included in an EGPRS RLC/MAC block for data transfer, the mobile station shall use MCS-6. If these rules require a retransmission in MCS-4, a PAN field is to be included in an EGPRS RLC/MAC block for data transfer and ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.7.2 Test Purposes | 1. To verify that the mobile station re-transmits a negatively acknowledged uplink data block using MCS-6 when the rules would otherwise require re-transmission using MCS-9, but a PAN field is to be included.
2. To verify that the mobile station re-transmits a negatively acknowledged uplink data block using MCS-1 when ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.7.3 Method of Test | Initial Conditions
System Simulator:
1 cell with EGPRS support, default setting, PBCCH not present.
Mobile Station:
The MS is EGPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context 2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is triggered to transfe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.8 Uplink TBF, Handling of Erroneous PAN Fields,SSN Based Format | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.8.1 Conformance Requirements | In the case of a PAN field, the bitmap shall be interpreted in the same way as for the case of PACKET UPLINK ACK/NACK, EGPRS PACKET DOWNLINK ACK/NACK or EGPRS PACKET DOWNLINK ACK/NACK TYPE 2 message with the following exceptions:
• if the processing of a PAN would cause an element of V(B) to be changed from ACKED or TE... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 58a.1.8.2 Test Purposes | 1. To verify that the mobile station ignores the entire PAN field if a previously positively acknowledged data block is subsequently negatively acknowledged.
2. To verify that the mobile station ignores the entire PAN field if the PAN field positively acknowledges a data block which has yet to be transmitted. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.