ianncity/BE-STEM
Viewer
• Updated
• 356k • 11
ianncity
ianncity
·
AI & ML interests
None yet
Recent Activity
updated
a dataset 3 days ago
ianncity/BE-STEM published
a dataset 3 days ago
ianncity/BE-STEM new activity
7 days ago
zai-org/GLM-5:Will there be a glm-5-air? Organizations
None yet
updated a dataset 3 days ago
published a dataset 3 days ago
Will there be a glm-5-air?
➕ 3
1
#38 opened 7 days ago
by
ianncity
updated a dataset 8 days ago
published a dataset 8 days ago
updated a dataset 8 days ago
published a dataset 8 days ago
updated a dataset 8 days ago
published a dataset 8 days ago
liked a dataset 10 days ago
reacted to kostakoff's post with 👍 10 days ago
Post
3298
My home lab for AI models - llmlaba v1
After I began learning MLOps I realized that I needed some kind of home lab, there are a lot of GPUs that I need to learn how to set up and test.
So I spent some time to do a researching which platform I could buy or build.
My requirements ware:
- Limited budget
- Power supply 1 kW or higher
- Few PCIe slots to be able to install more than one gpu
- Zero maintenance cost, I don't want spend a lot of time or money to maintain lab hardware, except for the GPUs
I chose the Intel Mac Pro 7.1:
- Prices on eBay acceptable
- Excelent cooling
- 1.4 kW power supply
- 7 PCIe slots
- Zero maintenance: I don't need to do anything with the Mac Pro hardware; it just works
- Classic UEFI boot loader
It requires a bit of OS preparation:
1. Install Ubuntu 24.04 (it works with the general PC ISO image)
2. Set up T2 drivers
3. Install t2fanrd to manually manage fans (/etc/t2fand.conf) https://wiki.t2linux.org/guides/fan/
4. Fix PCIe BAR: add pci=realloc to GRUB_CMDLINE_LINUX_DEFAULT so the Linux kernel will properly initializes server GPUs without Graphics Output Protocol
5. Install NVIDIA GPU driver:
And it works!
I was able to run server-grade Nvidia Tesla P100 (required DIY air duct), and consumer Nvidia Titan X, Titan V, GTX 1080 cards on the old Mac Pro 7.1 - even three in parallel.
llmlaba
After I began learning MLOps I realized that I needed some kind of home lab, there are a lot of GPUs that I need to learn how to set up and test.
So I spent some time to do a researching which platform I could buy or build.
My requirements ware:
- Limited budget
- Power supply 1 kW or higher
- Few PCIe slots to be able to install more than one gpu
- Zero maintenance cost, I don't want spend a lot of time or money to maintain lab hardware, except for the GPUs
I chose the Intel Mac Pro 7.1:
- Prices on eBay acceptable
- Excelent cooling
- 1.4 kW power supply
- 7 PCIe slots
- Zero maintenance: I don't need to do anything with the Mac Pro hardware; it just works
- Classic UEFI boot loader
It requires a bit of OS preparation:
1. Install Ubuntu 24.04 (it works with the general PC ISO image)
2. Set up T2 drivers
sudo apt install -y dkms linux-headers-$(uname -r) applesmc-t2 apple-bce lm-sensors3. Install t2fanrd to manually manage fans (/etc/t2fand.conf) https://wiki.t2linux.org/guides/fan/
4. Fix PCIe BAR: add pci=realloc to GRUB_CMDLINE_LINUX_DEFAULT so the Linux kernel will properly initializes server GPUs without Graphics Output Protocol
5. Install NVIDIA GPU driver:
sudo apt install nvidia-driver-570And it works!
I was able to run server-grade Nvidia Tesla P100 (required DIY air duct), and consumer Nvidia Titan X, Titan V, GTX 1080 cards on the old Mac Pro 7.1 - even three in parallel.
- 3 replies
liked 2 datasets 12 days ago
updated a dataset 12 days ago
published a dataset 12 days ago
Claude 4.6 Opus is released, why you didn't make a dataset?
19
#5 opened 14 days ago
by
MihaiPopa-1
liked a model 20 days ago
liked a dataset 21 days ago
liked a model 22 days ago
hello
❤️ 2
11
#1 opened 24 days ago
by
CryptoAIM