| # Voltage source location file description | |
| This file specifies the description of the C4 bump configurations file. | |
| The file is a csv as described below: | |
| ``` | |
| <x_coordinate>, <y_coordinate>, <octagonal_c4_bump_edge_length>, <voltage_value> | |
| ``` | |
| The x and y coordinate specify the center location of the voltage C4 bumps in | |
| micro meter. | |
| The octagonal c4_edge_length specifies the edge length of the C4 to determine | |
| the pitch of the RDL layer in micron | |
| Voltage_value specifies the value of voltage source at the C4 bump. In case | |
| there is a need to specify voltage drop in micron | |
| ## Example file | |
| ``` | |
| 250,250,20,1.1 | |
| 130,170,20,1.1 | |
| 370,410,10,1.1 | |
| 410,450,10,1.1 | |
| ``` | |