id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 249
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
101 859-1
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP); Profile Test Specification (PTS); Part 1: Summary
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185901/01.01.01_60/ts_10185901v010101p.pdf
|
The present document specifies the Profile Test Specification (PTS) summary referencing all the specifications necessary for the conformance testing of the DECT Multimedia Access Profile (DMAP), Application Specific Access Profile (ASAP). The present document, together with the specifications it references, constitutes the ASAP PTS. The present document has the following structure: • Clause 4 contains general information relative to the profile including references to the related specifications; • Clause 5 contains a summary and references to the specifications relevant for each of DECT protocol layers to be tested.
|
101 851-5-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 5: UE Radio Transmission and Reception; Sub-part 1: G-family (S-UMTS-G 25.101)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510501/02.01.01_60/ts_1018510501v020101p.pdf
|
The present document is to establish the minimum RF characteristics for the User Equipment (UE).
|
101 851-4-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 4: Physical layer procedures; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.214)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510403/03.02.01_60/ts_1018510403v030201p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family G enhanced of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [i.1], TS 125 213 [i.2], TS 125 215 [i.3], TS 125 214 [5], TS 125 331 [i.4] and TS 125 433 [6] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G family radio interface performances over satellite and new functions.
|
101 851-4-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 4: Physical layer procedures; Sub-part 2: A-family (S-UMTS-A 25.214)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510402/02.01.01_60/ts_1018510402v020101p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [2], TS 125 212 [3], TS 125 213 [4], TS 125 214 [5] and adapted for operation over satellite transponders.
|
101 851-4-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 4: Physical layer procedures; Sub-part 1: G-family (S-UMTS-G 25.214)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510401/02.01.01_60/ts_1018510401v020101p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [9], TS 125 213 [10], TS 125 215 [11], TS 125 214 [5], TS 125 331 [12] and TS 125 433 [6] and adapted for operation over satellite transponders.
|
101 859-3
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185903/01.01.01_60/ts_10185903v010101p.pdf
|
The present document contains the test specification for DECT Multimedia Access Profile (DMAP), Application Specific Access Profile (ASAP); Fixed Part (FP) applications. The main objective of the ASAP test specification is to provide tests giving a high probability of air interface inter-operability between different manufacturer's equipment in different environments (i.e. public, business and residential). The ISO standard for the methodology of conformance testing ISO/IEC 9646 Parts 1 to 7 [12] to [18] is used as the basis for the test methodology, and as the basis for the test case specification. This is considered to be unsuitable for Physical layer testing, and therefore a text description is used. The test cases listed in the present document have been derived from the DECT Packet Radio Service (DPRS); Test Case Library (TCL) [21] to [26]. In addition as far as the Physical layer is concerned EN 300 176 [19] applies. Additional ASAP specific test cases are included where required. The Profile IXIT is based on the DECT DPRS PIXITs specified in EN 301 469 [21] to [26].
|
101 851-3-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 3: Spreading and modulation; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.213)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510303/03.02.01_60/ts_1018510303v030201p.pdf
|
The present document describes spreading and modulation for the Physical Layer for family G enhanced of the satellite component of UMTS (S-UMTS-G enhanced). It is based on the FDD mode of UTRA defined by TS 101 851-1-3 [1], TS 101 851-2-3 [2], TS 101 851-4-3 [3] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G family radio interface performances over satellite and new functions.
|
101 851-3-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 3: Spreading and modulation; Sub-part 2: A-family (S-UMTS-A 25.213)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510302/02.01.01_60/ts_1018510302v020101p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [2], TS 125 212 [3], TS 125 213 [4], TS 125 214 [5] and adapted for operation over satellite transponders.
|
101 851-3-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 3: Spreading and modulation; Sub-part 1: G-family (S-UMTS-G 25.213)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510301/02.01.01_60/ts_1018510301v020101p.pdf
|
The present document describes spreading and modulation for the Physical Layer for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 101 851-1-1 [1], TS 101 851-2-1 [2], TS 101 851-4-1 [3] and adapted for operation over satellite transponders.
|
101 852-2-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 2: UNI Service Specific Convergence Sublayer (SSCS); Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520202/01.02.01_60/ts_1018520202v010201p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test TS 101 763-2 [2]. The objective of the present document is to provide a basis for conformance tests for Broadband Radio Access Network (BRAN) HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology.
|
101 851-2-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 2: Multiplexing and channel coding; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.212)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510203/03.02.01_60/ts_1018510203v030201p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family G enhanced of the satellite component of UMTS (S-UMTS-G enhanced). It is based on the FDD mode of UTRA defined by TS 125 211 [i.1], TS 125 212 [i.2], TS 125 213 [i.3] and TS 125 214 [i.4] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G family radio interface performances over satellite and new functions.
|
101 851-2-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 2: Multiplexing and channel coding; Sub-part 2: A-family (S-UMTS-A 25.212)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510202/02.01.01_60/ts_1018510202v020101p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [2], TS 125 212 [3], TS 125 213 [4], TS 125 214 [5] and adapted for operation over satellite transponders.
|
101 851-2-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 2: Multiplexing and channel coding; Sub-part 1: G-family (S-UMTS-G 25.212)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510201/02.01.01_60/ts_1018510201v020101p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [6], TS 125 212 [7], TS 125 213 [8] and TS 125 214 [9] and adapted for operation over satellite transponders.
|
101 851-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 2: Multiplexing and channel coding (S-UMTS-A 25.212)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185102/01.02.01_60/ts_10185102v010201p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [5], TS 125 213 [6] and TS 125 214 [7] and adapted for operation over satellite transponders.
|
101 851-1-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 1: Physical channels and mapping of transport channels into physical channels; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.211)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510103/03.02.01_60/ts_1018510103v030201p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family G enhanced of the satellite component of UMTS (S-UMTS-G enhanced). It is based on the FDD mode of UTRA defined by TS 125 201 [4], TS 125 211 [i.1], TS 125 302 [5] and TS 125 435 [6] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G-family radio interface performances over satellite and new functions.
|
101 851-1-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 1: Physical channels and mapping of transport channels into physical channels; Sub-part 2: A-family (S-UMTS-A 25.211)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510102/02.01.01_60/ts_1018510102v020101p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [5], TS 125 213 [6], TS 125 214 [7] and adapted for operation over satellite transponders.
|
101 851-1-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 1: Physical channels and mapping of transport channels into physical channels; Sub-part 1: G-family (S-UMTS-G 25.211)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510101/02.01.01_60/ts_1018510101v020101p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 201 [4], TS 125 211 [8], TS 125 302 [5] and TS 125 435 [6] and adapted for operation over satellite transponders.
|
101 851-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 1: Physical channels and mapping of transport channels into physical channels (S-UMTS-A 25.211)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185101/01.02.01_60/ts_10185101v010201p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 201 [4], TS 125 211 [5], TS 125 302 [6] and TS 125 435 [7] and adapted for operation over satellite transponders.
|
101 842
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; VDL4 ground-based constituent requirement traceability with the SES 552/2004 interoperability Regulation
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101842/01.01.01_60/ts_101842v010101p.pdf
|
The present document applies to the following radio equipment types: • Very High Frequency (VHF) Digital Link (VDL) Mode 4 ground-based radio transmitters and receivers for air-ground communications operating in the VHF band, using Gaussian-filtered Frequency Shift Keying (GFSK) Modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 118,000 MHz to 136,975 MHz as defined in ICAO VHF Digital Link (VDL) Standards and Recommended Practices (SARPs) [2]. The present document is designed to ensure that equipment will be compatible with the relevant ICAO VHF Digital Link (VDL) Standards and Recommended Practices (SARPs) [2] and VDL Mode 4 Technical Manual (TM) [1]. It also shows how the requirements can be traced to the ETSI interpretation of the EC 552/2004 [12] for the Single European Sky. Manufacturers should note that in future the tuning range for the ground transceivers may also cover any 25 kHz channel from 108,000 MHz to 117,975 MHz. The scope of the present document is limited to ground stations. The equivalent specification for airborne stations is EN 302 842 [10] and TS 102 842 [11]. The VDL Mode 4 system provides digital communication exchanges between aircraft and ground-based systems and other aircraft supporting surveillance and communication applications. The supported modes of communication include: • broadcast and point-to-point communication; • broadcast services including Automatic Dependent Surveillance - Broadcast (ADS-B), Traffic Information Service - Broadcast (TIS-B) and Flight Information Service - Broadcast (FIS-B) capabilities; • air-air, air-to-ground, and ground-to-air services; • operation without ground infrastructure. The present document is derived from the specifications: • VDL Mode 4 standards produced under the auspices of the International Civil Aviation Organization (ICAO) [1] and [2]. • Other relevant standards as defined in clause 2. It is envisaged that manufacturers may provide equipment supporting: • broadcast services only; • point-to-point services only; • both broadcast and point-to-point services. The present document includes: • clause 2 provides references to relevant documents; • clause 3 provides general definitions, abbreviations and symbols used; • clause 4 refers to a general description and architecture of VDL Mode 4 contained in EN 301 842-2 [7]; • clause 5 provides tables tracing technical requirements specifications applicable to the interoperability Regulation [12]; • annex A provides a Bibliography; • a document history. ETSI ETSI TS 101 842 V1.1.1 (2007-05) 6 Mandating and Recommendation Phrases a) "Shall" The use of the word "Shall" indicates a mandated criterion; i.e. compliance with the particular procedure or specification is mandatory and no alternative may be applied. b) "Should" The use of the word "Should" (and phrases such as "It is recommended that...", etc.) indicate that though the procedure or criterion is regarded as the preferred option, alternative procedures, specifications or criteria may be applied, provided that the manufacturer, installer or tester can provide information or data to adequately support and justify the alternative.
|
101 823-5-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 5: Profile for Home Environment; Sub-part 3: Profile Test Specification (PTS) - Profile Specific Test Specification (PSTS)
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230503/01.03.01_60/ts_1018230503v010301p.pdf
| |
101 823-5-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 5: Profile for Home Environment; Sub-part 2: Profile Test Specification (PTS) - Summary
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230502/01.03.01_60/ts_1018230502v010301p.pdf
|
The present document specifies the Profile Test Specification (PTS) summary referencing all the ENs or TSs necessary for the conformance testing of the Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) layer; Part 5: Profile for Home Environments. This PTS summary together with the ENs and TSs it references constitute the HE PTS. The present document has the following structure: - clause 4 contains general information relative to the profile including references to the related Ens or TSs; - clause 5 contains a summary and references to the ENs or TSs relevant for each of BRAN protocol layers to be tested.
|
101 851-6-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 6: Ground stations and space segment radio transmission and reception; Sub-part 1: G-family (S-UMTS-G 25.104)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510601/02.01.01_60/ts_1018510601v020101p.pdf
|
The present document specifies the satellite, gateway and Complementary Ground Components (CGCs) minimum RF characteristics and ground station performance of S-UMTS interface G.
|
101 823-4-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 4: Extension for Home Environment; Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230403/01.03.01_60/ts_1018230403v010301p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERLAN type 2; Data Link Control (DLC) layer; Extension for Home Environment. The objective of the present document is to provide a basis for conformance tests for BRAN H/2 equipment giving a high probability of air interface inter-operability between different manufacturers. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [8] and ISO/IEC 9646-2 [9]) as well as the ETSI rules for conformance testing (ETS 300 406 [7]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 823-4-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 4: Extension for Home Environment; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230402/01.03.01_60/ts_1018230402v010301p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN Type 2; Data Link Control (DLC) layer; Extension for Home Environment. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [13] and ISO/IEC 9646-2 [14]) as well as the ETSI rules for conformance testing (ETS 300 406 [12]) are used as a basis for the test methodology.
|
101 823-4-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 4: Extension for Home Environment; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230401/01.03.01_60/ts_1018230401v010301p.pdf
|
The present document provides the PICS proforma for BRAN HIPERLAN type 2 DLC layer, Extension for Home Environment as defined in TS 101 761-4 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 823-3-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 3: Profile for business environment; Sub-part 3: Profile Test Specification (PTS) - Profile Specific Test Specification (PSTS)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230303/01.02.01_60/ts_1018230303v010201p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the Broadban Radio Access Networks (BRAN) HIPERLAN Type 2; Data Link Control (DLC) layer; Profile for business environment. The objective of the present document is to provide a basis for conformance tests for Broadban Radio Access Networks (BRAN) HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [22] and ISO/IEC 9646-2 [23]) as well as the ETSI rules for conformance testing (ETS 300 406 [21]) are used as a basis for the test methodology. Annex A provides the Profile Implementation eXtra Information for Testing (IXIT) proforma of the ATS. Annex B provides the Profile Conformance Test Report (Profile CTR) proforma of the MT side ATS. Annex C provides the Profile Conformance Test Report (Profile CTR) proforma of the AP/CC side ATS. Annex D provides the System Conformance Test Report (SCTR) proforma. Annex E provides the System Conformance Statement (SCS) proforma. Annex F provides the Tree and Tabular Combined Notation (TTCN) part of the ATS.
|
101 823-3-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 3: Profile for business environment; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230302/01.02.01_60/ts_1018230302v010201p.pdf
|
The present document specifies the Profile Test Specification (PTS) summary referencing all the ENs or TSs necessary for the conformance testing of the Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) layer; Part 3: Profile for business environment. This PTS summary together with the ENs and TSs it references constitute the BE PTS. The present document has the following structure: - clause 4 contains general information relative to the profile including references to the related ENs or TSs; - clause 5 contains a summary and references to the ENs or TSs relevant for each of BRAN protocol layers to be tested.
|
101 823-3-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 3: Profile for business environment; Sub-part 1: Profile Requirement List (PRL) proforma
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230301/01.03.01_60/ts_1018230301v010301p.pdf
|
The present document provides the Profile Requirement List (PRL) proforma for BRAN HIPERLAN type 2 DLC layer, Profile for business environments as defined in TS 101 761-3 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 823-2-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 2: Radio Link Control (RLC) sublayer; Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230203/01.05.01_60/ts_1018230203v010501p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERLAN type 2; Data Link Control (DLC) layer; Radio Link Control (RLC) sublayer. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Automatic generation is no longer provided since version 1.2.1 which explains why annex B is void in this version of the present document. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex D provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex F provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 823-2-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 2: Radio Link Control (RLC) sublayer; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230202/01.05.01_60/ts_1018230202v010501p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN type 2; Data Link Control (DLC) layer; Radio Link Control (RLC) sublayer. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.
|
101 823-2-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 2: Radio Link Control (RLC) sublayer; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230201/01.05.01_60/ts_1018230201v010501p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Radio Link Control (RLC) layer of Hiperlan type 2 as defined in TS 101 761-2 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 875
|
Methods for Testing and Specification (MTS); The Tree and Tabular Combined Notation version 3 TTCN-3: Library of Additional Predefined Functions
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101875/01.01.01_60/ts_101875v010101p.pdf
|
The present document defines additional pre-defined functions that may be used in the TTCN-3 test language defined in ES 201 873-1.
|
101 852-1-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 1: Common part; Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520103/01.02.01_60/ts_1018520103v010201p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the Broadband Radio Access Networks (BRAN) HIPERLAN Type 2; Cell based Convergence Layer; Part 1: Common part. The objective of the present document is to provide a basis for conformance tests for Broadband Radio Access Networks (BRAN) HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 823-1-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 1: Basic data transport functions; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230101/01.04.01_60/ts_1018230101v010401p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for BRAN HIPERLAN type 2 DLC layer, Part 1: Basic Data Transport function, as defined in TS 101 761-1 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 818-6
|
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Trunk Hunting (TH) supplementary service; Part 6: Abstract test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10181806/01.01.01_60/ts_10181806v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the Network side of the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [11]) of implementations conforming to the stage three standard for the Trunk Hunting (TH) supplementary service for the pan-European Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol, TS 101 818-1 [3]. TS 101 818-5 [5] specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS and partial PIXIT proforma specification. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the User side of the T reference point or coincident S and T reference point of implementations conforming to TS 101 818-1 [3].
|
101 818-5
|
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Trunk Hunting (TH) supplementary service; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10181805/01.01.01_60/ts_10181805v010101p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the Network side of the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [8]) of implementations conforming to the stage three standard for the Trunk Hunting (TH) service for the pan-European Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol, TS 101 818-1 [1]. The present document is applicable to testing of network implementations claiming to conform to TS 101 818-1 [1]. A further part of the present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma based on the present document. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the User side of the T reference point or coincident S and T reference point of implementations conforming to TS 101 818-1 [1].
|
101 818-4
|
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Trunk Hunting (TH) supplementary service; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10181804/01.01.01_60/ts_10181804v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the User side of the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [11]) of implementations conforming to the stage three standard for the Trunk Hunting (TH) supplementary service for the pan-European Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol, TS 101 818-1 [3]. TS 101 818-3 [5] specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS and partial PIXIT proforma specification. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the Network side of the T reference point or coincident S and T reference point of implementations conforming to TS 101 818-1 [3].
|
101 851-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 3: Spreading and modulation (S-UMTS-A 25.213)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185103/01.02.01_60/ts_10185103v010201p.pdf
|
The present document describes spreading and modulation for the Physical Layer for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [1], TS 125 212 [2], TS 125 213 [3], TS 125 214 [4] and adapted for operation over satellite transponders.
|
101 818-2
|
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1); Trunk Hunting (TH) supplementary service; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10181802/01.01.01_60/ts_10181802v010101p.pdf
|
The present document is applicable to the stage three of the Trunk Hunting (TH) supplementary service for the pan- European Integrated Services Digital Network (ISDN) as provided by European public telecommunications operators at the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [9]) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol. Stage three identifies the protocol procedures and switching functions needed to support a telecommunication service (see CCITT Recommendation I.130 [8]). The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDN DSS1 supplementary service interactions protocol as specified in TS 101 818-1 [5] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [7]. The supplier of a protocol implementation which is claimed to conform to TS 101 818-1 [5] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
101 818-1
|
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1); Trunk Hunting (TH) supplementary service; Part 1: Protocol specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10181801/01.01.01_60/ts_10181801v010101p.pdf
|
The present document specifies the stage three of the Trunk Hunting (TH) supplementary service for the pan-European Integrated Services Digital Network (ISDN) as provided by European public telecommunications operators at the T reference point or coincident S and T reference point (as defined in CCITT Recommendation I.411 [12] ) by means of the Digital Subscriber System No. one (DSS1). Stage three identifies the protocol procedures and switching functions needed to support a telecommunications service (see CCITT Recommendation I.130 [6]). In addition, the present document specifies the protocol requirements at the T reference point where the service is provided to the user via an intermediate private ISDN. The present document does not specify the additional protocol requirements where the service is provided to the user via a telecommunications network that is not an ISDN. The TH supplementary service enables calls to a single ISDN number to be offered to a free access in a group of accesses to which a private ISDN is connected (T reference point). The principles for the selection of a free channel within an access are a network provider matter as part of the basic call procedures and so are outside the scope of the present document. The TH service is applicable to all circuit-switched telecommunication services. Further parts of EN 301 484 [13] specify the method of testing required to identify conformance to the present document.
|
101 812
|
Digital Video Broadcasting (DVB); Multimedia Home Platform (MHP) Specification 1.0.3
|
TS
|
1.3.2
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101812/01.03.02_60/ts_101812v010302p.pdf
|
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
|
101 811-4-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 4: IEEE 1394 Bridge Layer; Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110403/01.02.01_60/ts_1018110403v010201p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test TS 101 493-4 [4]. The objective of the present document is to provide a basis for conformance tests for BRAN, HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN, HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [7] and ISO/IEC 9646-2 [8]) as well as the ETSI rules for conformance testing (ETS 300 406 [6]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the partial Protocol Implementation Extra Information for Testing (PIXIT) proforma of the MT side ATS. Annex C provides the partial Protocol Implementation Extra Information for Testing (PIXIT) proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) proforma of the AP side ATS.
|
101 811-4-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 4: IEEE 1394 Bridge Layer; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110402/01.02.01_60/ts_1018110402v010201p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test TS 101 493-4 [2]. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology.
|
101 811-4-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 4: IEEE 1394 Bridge Layer; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110401/01.02.01_60/ts_1018110401v010201p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma TS 101 493-4 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 811-3-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 3: IEEE 1394 Service Specific Convergence Sublayer (SSCS); Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110303/01.03.01_60/ts_1018110303v010301p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN type 2; Packet based Convergence Layer; Part 3: IEEE 1394 Service Specific Convergence Sublayer (SSCS). The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 823-1-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 1: Basic data transport functions; Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230103/01.04.01_60/ts_1018230103v010401p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERLAN type 2; Data Link Control (DLC) layer; Part 1: Basic Data Transport Function. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 811-3-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 3: IEEE 1394 Service Specific Convergence Sublayer (SSCS); Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110301/01.03.01_60/ts_1018110301v010301p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Packet based Convergence Layer for HIPERLAN 2; Part 3: IEEE 1394 SSCS, as defined in TS 101 493-3 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 811-2-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 2: Ethernet Service Specific Convergence Sublayer (SSCS); Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110203/01.02.01_60/ts_1018110203v010201p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test TS 101 493-2 [2]. The objective of the present document is to provide a basis for conformance tests for BRAN, HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN, HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 811-2-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 2: Ethernet Service Specific Convergence Sublayer (SSCS); Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110202/01.02.01_60/ts_1018110202v010201p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test TS 101 493-2 [2]. The objective of the present document is to provide a basis for conformance tests for BRAN, HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN, HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology.
|
101 811-2-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 2: Ethernet Service Specific Convergence Sublayer (SSCS); Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110201/01.02.01_60/ts_1018110201v010201p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma, as defined in TS 101 493-2 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 811-1-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Common part; Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110103/01.03.01_60/ts_1018110103v010301p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test TS 101 493-1 [1]. The objective of this test specification is to provide a basis for conformance tests for BRAN, HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN, HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 811-1-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Common part; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110102/01.03.01_60/ts_1018110102v010301p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to TS 101 493-1 [1]. The objective of this test specification is to provide a basis for conformance tests for Broadband Radio Access Networks (BRAN), HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's Broadband Radio Access Networks (BRAN), HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.
|
101 811-1-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Common part; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110101/01.03.01_60/ts_1018110101v010301p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the packet based convergence layer for HIPERLAN 2, as defined in TS 101 493-1 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 808-9
|
Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS); Test Case Library (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK) layer - Cordless Radio Fixed Part Fixed radio Termination (CRFP_FT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180809/01.01.01_60/ts_10180809v010101p.pdf
|
The present document contains the Abstract Test Suite (ATS) specification to test the DECT Wireless Relay Station (WRS) Network (NWK) layer at the Fixed radio Termination (FT). The objective of the present document is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [7] and ISO/IEC 9646-2 [8]) as well as the ETSI rules for conformance testing (ETS 300 406 [5]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS.
|
101 851-4
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 4: Physical layer procedures (S-UMTS-A 25.214)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185104/01.02.01_60/ts_10185104v010201p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [5], TS 125 212 [6], TS 125 213 [7], TS 125 215 [8], TS 125 214 [9], TS 125 331 [10] and TS 125 433 [11] and adapted for operation over satellite transponders.
|
101 863-6
|
Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 6: Packet switched data
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186306/01.01.01_60/ts_10186306v010101p.pdf
|
The present document specifies the Digital Enhanced Cordless Telecommunications (DECT) access protocols and Fixed Part (PF) and Portable Part (PT) interworking/mappings necessary to ensure that the Universal Mobile Telecommunication System (UMTS) General Packet Radio Service (GPRS) can be provided over DECT. To enable DECT terminals to interwork with DECT systems which are connected to the UMTS infrastructure, from the DECT side the present document is based on DECT Packet Radio Services EN 301 649 [16] and on the DECT Common Interface specification EN 300 175 parts 1 to 8 [1] to [8] (for the cases not covered by DPRS), from UMTS side the present document assumes interworking with UMTS specification release 4. An air-interface profile is specified for a particular set of UMTS services so that inter-operability of DECT equipment for these services can be achieved. Interworking functions/mappings are specified for Serving GPRS Support Node (SGSN) attachment for the DECT FT as the FT is using the Iu (PS)-interface towards the UMTS core network in the respect that the FT emulates an UTRAN Radio Network Controller (RNC) with regards to the UTRAN messages which are relevant to the present document. The present document is based on GPRS as described in TS 123 060 [22], it covers TS 124 008 [24] and TS 125 410 [25] as far as mapping is concerned and as far as this is required for support of packet switched data services. On the DECT side the TS covers DPRS as defined in EN 301 649 [16].
|
101 808-6
|
Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS); Test Case Library (TCL); Part 6: Abstract Test Suite (ATS) - Data Link Control (DLC) layer; Cordless Radio Fixed Part Fixed radio Termination (CRFP_FT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180806/01.01.01_60/ts_10180806v010101p.pdf
|
The present document contains the Abstract Test Suite (ATS) specification to test the DECT Wireless Relay Station (WRS) Data Link Control (DLC) layer at the Fixed radio Termination (FT). The objective of the present document is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS.
|
101 808-5
|
Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS); Test Case Library (TCL); Part 5: Abstract Test Suite (ATS) - Data Link Control (DLC) layer; Cordless Radio Fixed Part Portable radio Termination (CRFP_PT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180805/01.01.01_60/ts_10180805v010101p.pdf
|
The present document contains the Abstract Test Suite (ATS) specification to test the DECT Wireless Relay Station (WRS) Data Link Control (DLC) layer at the Portable radio Termination (PT). The objective of the present document is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS.
|
101 818-3
|
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Trunk Hunting (TH) supplementary service; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10181803/01.01.01_60/ts_10181803v010101p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the User side of the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [7]) of implementations conforming to the stage three standard for the Trunk Hunting (TH) service for the pan-European Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1) protocol, TS 101 818-1 [1]. The present document is applicable to testing of user implementations claiming to conform to TS 101 818-1 [1]. A further part of the present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma based on the present document. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the Network side of the T reference point or coincident S and T reference point of implementations conforming to TS 101 818-1 [1].
|
101 811-3-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 3: IEEE 1394 Service Specific Convergence Sublayer (SSCS); Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018110302/01.03.01_60/ts_1018110302v010301p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN type 2; Packet based Convergence Layer; Part 3: IEEE 1394 Service Specific Convergence Sublayer (SSCS). The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.
|
101 808-2
|
Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS); Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Cordless Radio Fixed Part Portable radio Termination (CRFP_PT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180802/01.01.01_60/ts_10180802v010101p.pdf
|
The present document contains the Abstract Test Suite (ATS) specification to test the DECT Wireless Relay Station (WRS) Medium Access Control (MAC) layer at the Portable radio Termination (PT). The objective of the present document is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [8] and ISO/IEC 9646-2 [9]) as well as the ETSI rules for conformance testing (ETS 300 406 [6]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the specification of the parallel test component LT_MAC. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS.
|
101 808-8
|
Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS); Test Case Library (TCL); Part 8: Abstract Test Suite (ATS) for Network (NWK) layer - Cordless Radio Fixed Part Portable radio Termination (CRFP_PT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180808/01.01.01_60/ts_10180808v010101p.pdf
|
The present document contains the Abstract Test Suite (ATS) specification to test the DECT Wireless Relay Station (WRS) Network (NWK) layer at the Portable radio Termination (PT). The objective of the present document is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6] and ISO/IEC 9646-2 [7]) as well as the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of this ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS.
|
101 804-3
|
Methods for Testing and Specification (MTS); Conformance Test Specification for ITU-T H.225.0 (Terminal, Gatekeeper and Gateway); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180403/02.01.01_60/ts_10180403v020101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the H.225.0 protocol for Terminal, Gatekeeper and Gateway. The objective of the present document is to provide conformance tests that give a greater probability of inter-operability. The ATS & PIXIT specification covers the procedures described in ITU-T Recommendations H.323 [3] and H.225.0 [4]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6], ISO/IEC 9646-2 [7] and ISO/IEC 9646-3 [8]) is used as basis for the test methodology.
|
101 823-5-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 5: Profile for Home Environment; Sub-part 1: Profile Requirement List proforma specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230501/01.03.01_60/ts_1018230501v010301p.pdf
|
The present document provides the Profile Requirement List (PRL) proforma for BRAN HIPERLAN type 2 DLC layer, Profile for Home Environment as defined in TS 101 761-5[1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, which come as modifications to the PICS proforma of the protocols which constitute the Home profile.
|
101 804-2
|
Methods for Testing and Specification (MTS); Conformance Test Specification for ITU-T H.225.0 (Terminal, Gatekeeper and Gateway); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180402/02.01.01_60/ts_10180402v020101p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the H.225.0 protocol for Terminal, Gatekeeper and Gateway. The objective of the present document is to provide conformance tests that give a greater probability of inter-operability. The TSS&TP specification covers the procedures described in ITU-T Recommendations H.323 [2] and H.225.0 [3]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5], ISO/IEC 9646-2 [6] and ISO/IEC 9646-3 [7]) is used as basis for the test methodology.
|
101 808-4
|
Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS); Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control (DLC) layer
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180804/01.01.01_60/ts_10180804v010101p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the DECT Wireless Relay Station (WRS) Data Link Control (DLC) layer. The objective of the present document is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.
|
101 804-1
|
Methods for Testing and Specification (MTS); Conformance Test Specification for ITU-T H.225.0 (Terminal, Gatekeeper and Gateway); Part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180401/02.01.01_60/ts_10180401v020101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the call signalling protocols for packet-based multimedia communication systems defined in ITU-T Recommendation H.323 [1] in accordance with the relevant guidance given in ISO/IEC 9646-7 [4]. The supplier of a protocol implementation which is claimed to conform to ITU-T Recommendation H.323 [1] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
101 804-1
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Technology compliance specifications; Part 1: Revision/Update of H.225.0 Protocol Implementation Conformance Statement (PICS) proforma specification for Terminal, Gatekeeper and Gateway
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180401/01.01.01_60/ts_10180401v010101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the call signalling protocols for packet-based multimedia communication systems defined in ITU-T Recommendation H.323 [1] in accordance with the relevant guidance given in ISO/IEC 9646-7 [4]. The supplier of a protocol implementation which is claimed to conform to ITU-T Recommendation H.323 [1] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
101 808-1
|
Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS); Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180801/01.01.01_60/ts_10180801v010101p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the DECT Wireless Relay Station (WRS) Medium Access Control (MAC) layer. The objective of the present document is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology.
|
101 787
|
Fixed Radio Systems; Point-to-Point equipment; Parameters for radio systems for the transmission of Sub-STM-0 digital signals operating in the 18 GHz frequency band
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101787/01.01.01_60/ts_101787v010101p.pdf
|
The present document specifies the minimum performance parameters for terrestrial digital fixed service radio communications equipments operating in the 18 GHz frequency band and provides for the following: - technical specifications relevant to the EMC Directive, detailed in annex B (normative); - system types codes for regulatory unique reference to the various system types detailed in the present document, refer to annex C (normative). Digital systems are intended to be used for point-to-point connections in local and regional networks at data rates of Synchronous Transport Module, Sub STM-0 Ref [44]. Digital systems considered in the present document will be able to meet the performance objectives of the ITU-R national portion of the reference path, i.e. ITU-R Recommendation F.1189 [24] and the performance objectives detailed in ITU-T Recommendation G.826 [31] and in ITU-T Recommendation G.828 [32] when published. The parameters to be specified fall into two categories: a) those that are required to provide compatibility between channels from different sources of equipment on the same route, connected either: - to separate antennas; or - to separate polarizations of the same antenna. b) parameters defining the transmission quality of the proposed system. The present document deals with Radio Frequency (RF) and baseband characteristics relevant to Sub STM-0 Synchronous Digital Hierarchy (SDH) transmission systems. Antenna/feeder system requirements are covered in EN 300 833 [14]. These digital systems capacities shall be in accordance with ITU-T Recommendation G.708 [28] . The present document does not contain aspects related to test procedures and test conditions, however they are to be found in EN 301 126-1 [15]. As the maximum transmission rate in a given bandwidth depends on system spectral efficiency, different equipment classes are defined: Class 1: equipment spectral efficiency based on typically 16 or 32-states modulation scheme (e.g. 16-QAM, 32-QAM, or equivalent); Class 2: equipment spectral efficiency based on typically 64 or 128-states modulation scheme (e.g. 64- QAM, 128-QAM, or equivalent). The above classes are indicative only and do not imply any constraint to the actual modulation format, provided that all the requirements in the present document are met. Safety aspects are outside the mandate of ETSI and they will not be considered in the present document. However compliance to CENELEC EN 60950 [1] will be required to comply with EC Directive R&TTE. Technical background for most of the parameters and requirements referred in the present document may be found in TR 101 036-1 [18]. ETSI ETSI TS 101 787 V1.1.1 (2000-05) 7
|
101 785
|
Fixed Radio Systems; Point-to-point equipment; Parameters for packet data radio systems for transmission of digital signals operating in the frequency range 23, 26, 28 or 38 GHz
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101785/01.01.01_60/ts_101785v010101p.pdf
|
The present document specifies the minimum performance parameters for terrestrial fixed packet data service radio communications equipments operating at 23, 26, 28, or 38 GHz. Such digital systems are intended to be used for point-to-point connections in local and regional networks at data rates of 10 Mbit/s and 100 Mbit/s. The parameters to be specified fall into two categories: a) those that are required to provide compatibility between channels from different sources of equipment on the same route, connected either: - to separate antennas; or - to separate polarizations of the same antenna; b) parameters defining the transmission quality of the proposed system. The present document deals with Radio Frequency (RF) and baseband characteristics relevant to packet data networking equipment. Antenna/feeder system requirements are covered in ETS 300 833 [2]. The present document does not focus on aspects related to test procedures and test conditions, however they are to be found in EN 301 126-1 [1], IEEE 1802-3 [17], and IEEE 1802-3d [18]. As the maximum transmission rate in a given bandwidth depends on system spectral efficiency, different equipment classes are defined: Class 2: equipment spectral efficiency based on typically 4-states modulation scheme (e.g. 4-FSK, 4-QAM, or equivalent); Class 4: equipment spectral efficiency based on typically 16 or 32-states modulation scheme (e.g. 16-QAM, 32-QAM, or equivalent); Class 5: equipment spectral efficiency based on typically 64 or 128-states modulation scheme (e.g. 64-QAM, 128-QAM, or equivalent). The above classes are indicative only and do not imply any constraint to the actual modulation format, provided that all the requirements in the present document are met. Safety aspects are outside the mandate of ETSI and they will not be considered in the present document. However compliance to CENELEC EN 60950 [24] will be required to comply with 99/5/EC Directive (R&TTE). Technical background for most of the parameters and requirements referred in the present document may be found in TR 101 036-1 [12], ISO/IEC 8802-3 [15], and IEEE 802.3 [16]. The present document does not address SDH/PDH radio requirements, therefore equipment with SDH/PDH interfaces should meet the requirements of the appropriate SDH/PDH radio specifications.
|
101 773
|
Services and Protocols for Advanced Networks (SPAN); Codepoints for V5 and derived protocols
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101773/01.02.01_60/ts_101773v010201p.pdf
|
The present document specifies the codepoints for messages and information elements used in V5 based standards. It is the ETSI master list and as such its purpose is to avoid duplication and aid in the correct allocation of new codepoints. The present document is initially applicable to V5.1 [1], V5.2 [2], NMDS [3] and the ATM Forum LES using AAL2 [4].
|
101 763-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Cell based Convergence Layer; Part 2: UNI Service Specific Convergence Sublayer (SSCS)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/10176302/01.01.01_60/ts_10176302v010101p.pdf
|
The present document describes the interworking between UNI signalling protocols and the HIPERLAN/2 control plane. The present document is applicable to HIPERLAN/2 equipment supporting ATM UNI signalling according to one of the following UNI standard recommendations: Q.2931 [3], ATMF UNI 3.1 [5], ATMF UNI 4.0 [6] and M-UNI [4]. The present document addresses only the functionality required to map ATM UNI signalling over the HIPERLAN/2 network, i.e. between an HIPERLAN/2 Access Point and Mobile Terminal. It does not address the requirements and technical characteristics for wired network interfaces at the Access Point and at the Mobile Terminal. The Cell based Convergence Layer consists of a Common Part Convergence Sublayer [7] and several Service Specific Convergence Sublayers (SSCS), which are defined in separate documents. The task of the Common Part of the Cell based Convergence Layer is to map between the fixed data unit of an ATM cell and the fixed data unit size used in the HIPERLAN/2 DLC layer. The Service Specific Convergence Sublayers all use services provided by the Common Part Convergence Sublayer and the HIPERLAN/2 Data Link Control (DLC) layer. The present document does not address the requirements and technical characteristics for type approval and conformance testing. These are covered in separate Technical Specifications. ETSI ETSI TS 101 763-2 V1.1.1 (2000-04) 5
|
101 763-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Cell based Convergence Layer; Part 1: Common Part
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/10176301/01.01.01_60/ts_10176301v010101p.pdf
|
The present document describes the basic transport of ATM cell streams via HIPERLAN/2. The mapping between ATM cells and HIPERLAN/2 DLC PDUs is specified. The present document is applicable to HIPERLAN/2 equipment supporting ATM cell transport. The present document does only address the functionality required to transfer ATM cells over the radio interface between a HIPERLAN/2 Access Point and Mobile Terminal. It does not address the requirements and technical characteristics for wired network interfaces at the Access Point and at the Mobile Terminal. The Cell based Convergence Layer consists of a Common Part Convergence Sublayer, defined in the present document, and several Service Specific Convergence Sublayers (SSCS), which are defined in separate documents. The Service Specific Convergence Sublayers all use services provided by the Common Part Convergence Sublayer and the HIPERLAN/2 Data Link Control (DLC) layer. The present document does not address the requirements and technical characteristics for type approval and conformance testing. These are covered by separate documents.
|
101 762
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Network Management
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101762/01.01.01_60/ts_101762v010101p.pdf
|
The purpose of the present document is to provide a common view of HIPERLAN Type 2 (H/2) devices from different vendors for basic network monitoring and network control. This is achieved by defining a H/2 SNMP MIB to optionally be included in H/2 devices. For network monitoring basic performance and fault monitoring is covered. A basic set of configuration parameters is defined for network control. Systems management like device setup, software upgrade and also the manager side for network management is out of the scope of the present document.
|
101 761-5
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 5: Profile for Home Environment
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/10176105/01.02.01_60/ts_10176105v010201p.pdf
|
The present document specifies the interoperability functions needed for a home environment. It contains functions of the Data Link Control Layer [1], the Radio Link Control sublayer [2], the DLC Extension for Home Environment [3], the Packet based Convergence Layer [4] and [5], the Bridge layer [6] and the Physical layer specifications [7] of HIPERLAN/2. It does not contain interoperability functions for communication over the fixed network. The present document is a profile document, selecting functions from the HIPERLAN/2 specifications of the reference list. It is also a document survey since it refers to versions of the basic specifications and since the version number of the present document is negotiated during association. A home environment is characterized by the following properties for the present document: • The home network is an ad hoc network. • It may include fixed networks like IEEE 1394 busses. • In the case of IEEE 1394 data traffic includes asynchronous and isochronous packets.
|
101 761-4
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 4: Extension for Home Environment
|
TS
|
1.3.2
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/10176104/01.03.02_60/ts_10176104v010302p.pdf
|
The present document specifies the extension of the basic DLC layer functions in TS 101 761-1 [1] and TS 101 761-2 [2] for direct mode operation in home environment. This DLC home extension specification gives first an overview of the HIPERLAN/2 home system concept. It then describes additional rules and elements to transport DM data over the channels introduced in TS 101 761-1 [1]. Forward Error Correction (FEC) is introduced in the DLC layer to achieve a much lower bit error rate for isochronous packet transport without ARQ. The present document also extends the RLC protocols in TS 101 761-2 [2] to support Constant Bit Rate (CBR) traffic by fixed slot allocation, to enable parameter negotiation for multicast connections, to enable association of multiple CLs for wireless terminals, and to enable Direct Link (DiL) Power Control. Furthermore, It describes some RLC protocols which are only specific for DM operation in home environment, such as DiL Link Quality Calibration, Dynamic CC Selection, and CC Responsibility Handover. Besides, a PIN and time-window based authentication key distribution protocol is specified for HIPERLAN/2 Home Devices (H/2-HDs). The DM services can be used by the IEEE 1394 CL (TS 101 493-3 and TS 101 493-4 (see bibliography)) for wireless bridging of different IEEE 1394 buses. The present document does not contain algorithms, which are only performed locally in a device, but describes rules and elements to transport data over the air interface. The goal is to provide interoperability between devices of different manufacturers. The present document does not address the requirements and technical characteristics for conformance testing. These are covered in a separate set of documents.
|
101 761-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 3: Profile for Business Environment
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/10176103/01.02.01_60/ts_10176103v010201p.pdf
|
The present document specifies the interoperability functions needed for a business environment. It contains functions of the Data Link Control Layer, the Radio Link Control Sublayer, the Convergence Layer, the Physical Layer and Network Management specifications of HIPERLAN/2. It does not contain interoperability functions for communication over the fixed network. The present document is a profile document, selecting functions from the HIPERLAN/2 basic specifications of the reference list. It is also a document survey since it refers to versions of the basic specifications and since the version number of the present document is negotiated during association and handover. A business environment is characterized by the following properties for the present document: • The fixed network is a Local Area Network (LAN) of the types Ethernet and IEEE802.1/2/3. • The traffic type is data traffic that is handled connectionless but with priorities by the Ethernet. The amount of streaming services is small. • Most of the data traffic goes between a terminal and the fixed network. • The fixed LAN network is usually physically well protected since it is installed in restricted areas.
|
101 761-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 2: Radio Link Control (RLC) sublayer
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/10176102/01.03.01_60/ts_10176102v010301p.pdf
|
The present document specifies the basic Radio Link Control (RLC) sublayer of HIPERLAN/2. The RLC sublayer is used to control radio association, resources and connection. The present document does not address the requirements and technical characteristics for conformance testing.
|
101 761-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 1: Basic Data Transport Functions
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/10176101/01.03.01_60/ts_10176101v010301p.pdf
|
The present document specifies the first phase of the basic data transport mechanism of the Data Link Control layer (DLC) of the HIPERLAN/2 system. It describes the technical characteristics of the following parts of the DLC layer: Error Control (EC), Medium Access Control (MAC) and the mapping between the PHY and the MAC layers of HIPERLAN/2.The present document does not address the requirements and technical characteristics for conformance testing. Those are covered in separate documents.
|
101 759
|
Digital Audio Broadcasting (DAB); Data Broadcasting - Transparent Data Channel (TDC)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101759/01.02.01_60/ts_101759v010201p.pdf
|
The present document specifies how to transport data transparently within the Digital Audio Broadcasting (DAB) system forming a Transparent Data Channel (TDC) and gives guidelines for its use.
|
101 757
|
Digital Audio Broadcasting (DAB); Conformance testing for DAB Audio
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101757/01.01.01_60/ts_101757v010101p.pdf
|
The present document specifies how tests can be designed to verify whether bitstreams and decoders meet the requirements specified in ETS 300 401 [2]. In the present document, encoders are not addressed specifically. An encoder may be considered to be a DAB audio encoder if it generates bitstreams compliant with the syntactic and semantic bitstream requirements specified in ETS 300 401 [2]. The characteristics of a bitstream such as the sampling frequency, mode and bit rate define the subset of the standard that is exploited in the bitstream. Decoder characteristics define the properties and capabilities of the applied decoding process. An example of a property is the accuracy with which the PCM audio signal is reconstructed. The capabilities of a decoder specify which coded bitstreams the decoder can decode and reconstruct, by defining the subset of the standard that may be exploited in decodable bitstreams. A bitstream can be decoded by a decoder if the characteristics of the coded bitstream are within the subset of the standard specified by the decoder capabilities. Procedures are described for testing the conformance of decoders to the requirements defined in ETS 300 401 [2]. Bitstreams for conformance testing, which are available from Eureka 147, are described briefly, and there is an annex describing a test for the operation of dynamic range control (DRC) in receivers. The provision of DRC is optional.
|
101 756
|
Digital Audio Broadcasting (DAB); Registered Tables
|
TS
|
2.5.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101756/02.05.01_60/ts_101756v020501p.pdf
|
The present document contains a number of tables for use in the implementation of the Digital Audio Broadcasting (DAB), system [1] and the related Multimedia Object Transfer (MOT) standard [2]. The tables in the present document are maintained by the WorldDAB Technical Committee. The procedure for registering a new value in an existing table or the registration of a new table in the present document is described in clause 4.
|
101 756
|
Digital Audio Broadcasting (DAB); Registered Tables
|
TS
|
1.8.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101756/01.08.01_60/ts_101756v010801p.pdf
|
The present document contains a number of tables for use in the implementation of the Digital Audio Broadcasting (DAB), system [1] and the related Multimedia Object Transfer (MOT) standard [2]. The tables in the present document are maintained by the WorldDAB Technical Committee. The procedure for registering a new value in an existing table or the registration of a new table in the present document is described in clause 4.
|
101 804-3
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Technology compliance specifications; Part 3: H.225.0 conformance test specifications; Abstract Test Suite (ATS) and PIXIT proforma specification for Terminal, Gatekeeper and Gateway
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10180403/01.01.01_60/ts_10180403v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the H.225.0 protocol for Terminal, Gatekeeper and Gateway. The objective of the present document is to provide conformance tests that give a greater probability of inter-operability. The ATS & PIXIT specification covers the procedures described in ITU-T Recommendations H.323 [3] and H.225.0 [4]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6], ISO/IEC 9646-2 [7] and ISO/IEC 9646-3 [8]) is used as basis for the test methodology.
|
101 749
|
Digital cellular telecommunications system (Phase 2+) (GSM); Immediate Service Termination (IST) Service description - Stage 1 (GSM 02.32 version 7.1.1 Release 1998)
|
TS
|
7.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101749/07.01.01_60/ts_101749v070101p.pdf
|
The present document specifies the stage 1 description of the Immediate Service Termination (IST) service which provides the means for the HPLMN to terminate all the activities of an HPLMN subscriber in a VPLMN. The purpose of this network feature is to enable the HPLMN to control the activities of its subscribers, particularly while they are roaming. If the HPLMN decides (based upon information received via Fraud Information Gathering System (FIGS) or other systems) that a roaming subscriber is behaving in a fraudulent or suspicious manner, the HPLMN can terminate all activities of the subscriber, including calls (including transferred and diverted calls) that are in progress. This procedure can also be used to terminate all the activities of a subscriber when the subscription has ended. The primary aim is to enable service providers/network operators to use IST to reduce the amount of money that they lose because of roaming fraud.
|
101 747
|
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); IP Interworking (IPI)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101747/01.01.01_60/ts_101747v010101p.pdf
|
The present document defines IP Interworking (IPI) between two TETRA networks for the transfer of IP data while MS migrates from one SwMI to another. The present document defines the use of GPRS Tunnelling Protocol (GTP), the Gateway GPRS Support Node (GGSN) and ISI for IPI. The present document proposes limited extension to SNDCP of the TETRA Air Interface and ISI in order to use the IP interworking functionality of the GGSN and to use standardized Gn and Gp interfaces. As a consequence, the protocols and signalling messages already defined and developed for GPRS can be used. The use of standard GGSN and other GPRS Backbone elements and the existing interworking functions is described for IPI. The architecture ensures re-use of the already standardized TETRA ISI Mobility Management, HDB and VDB functions and TETRA registration procedures between the Mobile Station and SwMI.
|
101 746
|
Digital cellular telecommunications system (Phase 2+) (GSM); Multiple Subscriber Profile (MSP) Phase 1 Service description, Stage 1 (GSM 02.97 version 7.1.0 Release 1998)
|
TS
|
7.1.0
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101746/07.01.00_60/ts_101746v070100p.pdf
|
The present document gives an overall view of how this service shall operate both in the PLMN and within the Mobile Station (MS). The present document defines functionality and is not intended to constrain implementation. NOTE: MSP phase 1 will be implemented using CAMEL phase 2. The present document reflects this implementation choice.
|
101 745
|
Digital cellular telecommunications system (Phase 2+) (GSM); Call Deflection Service description, Stage 1 (GSM 02.72 version 7.2.1 Release 1998)
|
TS
|
7.2.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101745/07.02.01_60/ts_101745v070201p.pdf
|
Call Deflection (CD) enables the served mobile subscriber to respond to an incoming call offered by the network by requesting redirection of this call to another number specified in the response. The CD supplementary service can only be invoked before the connection is established by the served mobile subscriber, i.e. in response to the offered call, or during the period that the served subscriber is being informed of the call. The served subscriber’s ability to originate calls is unaffected by the CD supplementary service.
|
101 741
|
Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Station Application Execution Environment (MExE); Service description; Stage 1 (GSM 02.57 version 7.1.0 Release 1998)
|
TS
|
7.1.0
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101741/07.01.00_60/ts_101741v070100p.pdf
|
The present document defines the stage one description of the Mobile Station Application Execution Environment (MExE). Stage one is an overall service description, primarily from the subscriber’s and service providers’ points of view, and does not deal with the details of the human interface itself. The present document includes information applicable to network operators, service providers and terminal, switch and database manufacturers. The present document contains the core requirements for a Mobile Station Application Execution Environment (MExE) which are sufficient to provide a complete service. It is highly desirable however, that technical solutions for a Mobile Station Application Execution Environment (MExE) should be sufficiently flexible to allow for possible enhancements. Additional functionalities not documented in the present document may implement requirements which are considered outside the scope of the present document. This additional functionality may be on a network-wide basis, nation-wide basis or particular to a group of users. Such additional functionality shall not compromise conformance to the core requirements of the service. MExE Service Environment MS MExE Scope of this TS Figure 1: Scope of this TS As indicated in Figure 1, the scope of the present document encompasses the MExE functionality in the MS, interaction with the MExE service environment. The MExE service environment is not necessarily restricted to the PLMN, and nodes providing MExE services (i.e. MExE servers) may also exist outside the PLMN. Aspects of the support provided by MExE servers within the MExE service environment (such as charging aspects, security level classification etc.) are covered by the present document, but not the MExE servers themselves. MExE requirements are considered to be applicable to both GSM and UMTS systems. ETSI ETSI TS 101 741 V7.1.0 (1999-08) 6 (GSM 02.57 version 7.1.0 Release 1998)
|
101 739
|
Digital cellular telecommunications system (Phase 2+) (GSM); Call Deflection (CD) Supplementary Service; Stage 2 (GSM 03.72 version 7.1.0 Release 1998)
|
TS
|
7.1.0
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101739/07.01.00_60/ts_101739v070100p.pdf
|
The present document gives the stage 2 description of the Call Deflection supplementary service.
|
101 732
|
Digital cellular telecommunications system (Phase 2+) (GSM); Tandem Free Operation (TFO); Service description; Stage 2 (GSM 03.53 version 8.0.0 Release 1999)
|
TS
|
8.0.0
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101732/08.00.00_60/ts_101732v080000p.pdf
|
The present document defines the stage 2 service description for Tandem Free Operation (TFO) in GSM. Tandem Free Operation applies only to speech calls. NOTE: The TFO principles are built so that they could be used as well by other systems other than GSM. In analogy with CCITT Recommendations I.130 [2] and with reference to CCITT Recommendations VI.1 Q.65 (Stage 2 of the method for the characterisation of services supported by an ISDN), the second stage of the following three-level structure is derived from a stage 1 service description. - Stage 1 is an overall service description, from the service subscriber's and user's standpoints, that views the network as a single entity which provides services to the user. - Stage 2 identifies the functional capabilities and information flows needed to support the service described in stage 1. Furthermore, it identifies various possible physical locations for the functional capabilities. The output of Stage 2, which is signalling system independent, is used as an input to Stage 3, the design of signalling system and switching Recommendations. - Stage 3 defines the signalling system protocols and switching functions needed to implement the service described in stage 2.
|
101 732
|
Digital cellular telecommunications system (Phase 2+) (GSM); Tandem Free Operation (TFO); Service description; Stage 2 (GSM 03.53 version 7.0.1 Release 1998)
|
TS
|
7.0.1
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101732/07.00.01_60/ts_101732v070001p.pdf
|
The present document defines the stage 2 service description for Tandem Free Operation (TFO) in GSM. Tandem Free Operation applies only to speech calls. NOTE: The TFO principles are built so that they could be used as well by other systems other than GSM. In analogy with CCITT Recommendations I.130 [2] and with reference to CCITT Recommendations VI.1 Q.65 (Stage 2 of the method for the characterisation of services supported by an ISDN), the second stage of the following three-level structure is derived from a stage 1 service description. - Stage 1 is an overall service description, from the service subscriber's and user's standpoints, that views the network as a single entity which provides services to the user. - Stage 2 identifies the functional capabilities and information flows needed to support the service described in stage 1. Furthermore, it identifies various possible physical locations for the functional capabilities. The output of Stage 2, which is signalling system independent, is used as an input to Stage 3, the design of signalling system and switching Recommendations. - Stage 3 defines the signalling system protocols and switching functions needed to implement the service described in stage 2.
|
101 727
|
Digital cellular telecommunications system (Phase 2+) (GSM); Multiple Subscriber Profile (MSP) (Phase 1) - Stage 2 (GSM 03.97 version 7.2.0 Release 1998)
|
TS
|
7.2.0
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101727/07.02.00_60/ts_101727v070200p.pdf
|
The present document specifies the stage 2 description of the Multiple Subscriber Profile (MSP) Supplementary Service Phase 1. MSP Phase 1 is implemented using CAMEL Phase 2. MSP Phase 2 will be implemented using CAMEL Phase 3.
|
101 715
|
Digital cellular telecommunications system (Phase 2+) (GSM); Support of Mobile Number Portability (MNP); Service description; Stage 1 (GSM 02.66 version 7.1.0 Release 1998)
|
TS
|
7.1.0
|
http://www.etsi.org/deliver/etsi_ts/101700_101799/101715/07.01.00_60/ts_101715v070100p.pdf
|
The present document defines the stage one description of the Support of Mobile Number Portability between GSM networks in the same country as well as PCS-1900 cross-sector portability (i.e., number portability between fixed and PCS-1900 mobile networks). Stage one is an overall service description, primarily from the service subscriber's and user's points of view, but does not deal with the details of the human interface itself. The present document is in response to a study mandate agreed between the European Commission and ETSI under order voucher ESTI/97/M-251 and the mandate by the US Federal Communications Commission for Service Provider Portability in North America. Mobile Number Portability (MNP) is applicable only to those telecommunication services identified by an MSISDN. The present document includes information applicable to network operators, service providers and terminal, switch and database manufacturers. The present document contains the core requirements for the Support of Mobile Number Portability between GSM network operators in the same country as well as PCS-1900 cross-sector portability which are sufficient to provide a complete service. Other cross-sector portability options (e.g. number portability between fixed and mobile networks) are outside the scope of the present document. It is highly desirable however, that technical solutions for MNP should be sufficiently flexible to allow for possible enhancements, e.g. cross-sector number portability, and MNP between analogue and digital mobile networks. Additional functionalities not documented in the present document may implement requirements which are considered outside the scope of the present document. This additional functionality may be on a network-wide basis, nation-wide basis or particular to a group of users. Such additional functionality shall not compromise conformance to the core requirements of the service. Porting between Service Providers (i.e. service provider portability) which does not involve a change of Network Operator is outside the scope of the present document. The relationship between Service Providers and Network Operators is outside the scope of the present document. The relationship between a Service Provider and subscriber is outside the scope of the present document. The interface between the Mobile Station (MS) and any external applications are outside the scope of the present document. Charging principles are outside the scope of the present document except where explicitly stated in the text.
|
101 699
|
Digital Video Broadcasting (DVB); Extensions to the Common Interface Specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101600_101699/101699/01.01.01_60/ts_101699v010101p.pdf
|
The present document presents a set of extensions to the command interface protocols of the common interface standardized in EN 50221 [5]. These provide facilities to allow a diverse range of functions to be delivered to receivers through modules attached to the common interface. In summary the functions supported are: Input Modules Allows modules to deliver transport streams and services to hosts. Status Query Functions Allows modules to interrogate the current status/configuration of the host. For example this generic function can be used to implement modules to provide: - Audience metering; - Audio description. Power manager Allows hosts to determine if modules are busy prior to entering a low power consumption stand-by mode. Event Management Allows modules to register timer events with a host to activate a host from a low power consumption stand by mode. Application MMI Allows a module to interact with the user by loading an application on to the host's application execution environment. Copy protection Allows modules (typically those providing CA functions) to control video copy protection features in a host. Software download Allows a CI module to be used as a source of firmware updates to a host by providing a framework within which manufacturer specific firmware loading protocols can be implemented. CA pipeline resource Allows private communication between applications on a receiver hosted API and CA facilities in a module. Module identification extension A key technology enhancement introduced here, and required by several of the above functions, is a method for identifying multiple instances of the same resource. This subdivides the resource_type field in the resource identifier into a smaller resource_type field and a resource_instance field. Accompanying this is a method for hosts to assign locally unique non-volatile IDs to modules (see "Extending use of the resource ID type field"). The protocols that support this module identification are provided by version 2 of the resource manger. The following resources depend on this enhancement. Hosts and modules that provide or use these resources shall support version 2 of the resource manger: • input modules; • status query functions; • event management; • copy protection; • CA pipeline resource. Table 1 identifies the element that shall provide the Module ID in each case: Table 1: Requirement for Module ID Resource Resource Provider Resource User Input Modules Status Query Functions Event Management Copy protection CA pipeline resource ETSI ETSI TS 101 699 V1.1.1 (1999-11) 8
|
101 679
|
Digital Enhanced Cordless Telecommunications (DECT); Broadband Integrated Services Digital Network (B-ISDN); DECT/B-ISDN interworking
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101600_101699/101679/01.01.01_60/ts_101679v010101p.pdf
|
The present document specifies how B-ISDN services can be accessed with a DECT terminal and describes the interworking between B-ISDN and the DECT end system. The present document covers interworking between B-ISDN constant bit rate (Class A) services and the following DECT services: - circuit mode 64 kbits/s unrestricted (ITU-T Recommendation I.231.1 [30]); - circuit mode Speech (ITU-T Recommendation I.231.2 [31]); - circuit mode 3,1 kHz Audio (ITU-T Recommendation I.231.3 [32]). The DECT end system reference configuration is used where the DECT fixed system and the DECT portable system together form an end system with the behaviour of a B-ISDN Terminal Equipment (B-ISDN-TE). Mobility management is outside the scope of the present document.
|
101 675
|
Technical Framework for the Provision of Interoperable ATM Services; Network-Network Interface (NNI) User and Control Plane Specification (including Network Functions and Service Aspects) Phase 2
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101600_101699/101675/01.01.01_60/ts_101675v010101p.pdf
|
The present document provides an enhanced description of interoperability on the basis of B-ISUP functionality using the B-ISUP protocol. It also contains a description of interoperability on the basis of the functionality defined in ITU-T Recommendation Q.2130 [9], where the interconnected networks may be using B-ISUP or PNNI protocols internally. The present document is the Phase 2 specification for the NNI.easi interface. It is written as a delta-document and includes only differences as compared with the corresponding Phase 1 document ETSI TS 101 674-1 [2]. Therefore, the present document follows the same internal structure as the Phase 1 document. The additional features specified in the present document are as follows: • Additional ATM transfer capabilities, i.e. SBR3 and ABR; • Additional signalling capabilities, i.e. support of Soft PVC; SVP connection and point-to-multipoint connections; • Interworking capabilities, i.e. with 64 kbit/s ISDN; PNNI; Frame Relaying. All network capabilities and functions that have been identified, as requirements for Phase 1 are also valid for Phase 2. Therefore, all clauses of the Phase 1 specification shall apply.
|
101 674-2
|
Technical Framework for the Provision of Interoperable ATM Services; Part 2: Network Management (X-Interface) Specification for Phase 1 Implementation
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101600_101699/10167402/01.01.01_60/ts_10167402v010101p.pdf
| |
101 852-2-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 2: UNI Service Specific Convergence Sublayer (SSCS); Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520203/01.02.01_60/ts_1018520203v010201p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the TS 101 763-2 [2]. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) proforma of the AP side ATS.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.