id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 249
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
102 442-6
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Multimedia Broadcast/Multicast Services; Part 6: Security
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10244206/01.01.01_60/ts_10244206v010101p.pdf
|
The present document intends to specify security requirements.
|
102 442-5
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Multimedia Broadcast/Multicast Services; Part 5: Performances over the radio interface
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10244205/01.01.01_60/ts_10244205v010101p.pdf
|
The scope of the present document is to establish UE minimum performances for Satellite Multimedia Broadcast/Multicast Service. The present document is applicable to UE that conform to TS 101 851 parts [1] to [3] and to RF characteristics specified in TS 125 101 [4]. The UE shall meet the specified performances for all S-MBMS services supported.
|
102 442-4
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Multimedia Broadcast/Multicast Services; Part 4: Interworking with terrestrial UMTS networks
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10244204/01.01.01_60/ts_10244204v010101p.pdf
|
The present document specifies requirements for interworking with 2G/3G terrestrial networks. Interworking with 2G/3G terrestial networks includes any of the following situations: • unicast point to point channel is provided by 2G/3G terrestial networks; • possibility to distribute S-MBMS services over a 2G/3G terrestial networks.
|
102 442-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Multimedia Broadcast/Multicast Services; Part 3: Introduction in the Radio Access Network (RAN)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10244203/01.01.01_60/ts_10244203v010101p.pdf
|
The present document specifies the support of Multimedia Broadcast/Multicast Service in S-UMTS, based on a point to multipoint connection, either directly from satellite or via terrestrial repeaters (IMRs).
|
102 442-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Multimedia Broadcast/Multicast Services; Part 2: Architecture and functional description
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10244202/01.01.01_60/ts_10244202v010101p.pdf
|
The present document describes architectural solution and functionalities for the S-MBMS bearer service.
|
102 442-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Multimedia Broadcast/Multicast Services; Part 1: Services definitions
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10244201/01.01.01_60/ts_10244201v010101p.pdf
|
The present document specifies the set of requirements for the support of Satellite Multimedia Broadcast Multicast Services. The present document includes information applicable to network operators, content providers, terminal and network manufacturers. Broadcast and Multicast are methods for transmitting data-grams from a single source to several destinations (point-to- multipoint). It is envisaged that for some applications, multiple users can receive the same data at the same time. The benefit of multicast and broadcast in the network is that the data is sent once on each link. For example, a network operator will send data to a satellite hub in order satellite broadcasts data regardless of the number of UEs that wish to receive it. The benefit of multicast and broadcast on the air interface is that many users can receive the same data on a common channel, thus not clogging up the satellite air interface with multiple transmissions of the same data. With increasing use of high bandwidth applications in third generation mobile systems, especially with a large number of users receiving the same high data rate services, terrestrial cellular networks and transport infrastructure are on the way of being overloaded. Satellite broadcast and multicast is an efficient alternative to relieve terrestrial networks and to extend service coverage in low dense and sparse population areas.
|
102 441
|
Digital Video Broadcasting (DVB); DVB-S2 Adaptive Coding and Modulation for Broadband Hybrid Satellite Dialup Applications
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102441/01.01.01_60/ts_102441v010101p.pdf
|
The present document forms the baseline specification for the provision of the DVB-S2 adaptive coding and modulation (DVB-S2 ACM) for GEO satellite interactive networks with dialup return channel terminals. It facilitates the use of such terminals for individual or collective communications in a domestic environment. It also supports the connection of such terminals with in-house satellite forward link and return channel telephone networks. The present document may be applied to all frequency bands allocated to GEO satellite services. The DVB-S2 standard is for forward link transmission. DVB-S2 is the second generation standard for satellite transmission, which provides higher power and bandwidth efficiency as well as adaptive coding and modulation.
|
102 440
|
WS-Session; Web Services for Application Session Services
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102440/01.02.01_60/ts_102440v010201p.pdf
|
The present document specifies Web Services (in WSDL, in clause 5) and a SOAP binding (in clause 6) for the Application Session Services defined in ECMA-354 [1]. The Application Session Services allow Applications to create and maintain a relationship with Servers termed Application Session. The Web services specified herein, allow Service Requesters (Applications in ECMA-354 [1]) and Service Providers (Servers in ECMA-354 [1]) to create and maintain such Application Sessions. The present document builds upon and imports the XML schema definitions from ECMA-354 [1]. The method of making the WSDL description of the specified services available to Service Provider and Requester is out of the scope of the present document. The ApplicationSessionTerminated operation of the present document is an outbound asynchronous event notification that Service Requesters receive from the Service Provider. Service Requester may also receive the event notification from web services, e.g. ECMA-348, that use the present document for session management. Clause 7 specifies the event subscription and notification behaviours supported by the two options defined in annex A and B. Annex A specifies the event subscription mechanism using WS-Eventing. Annex B specifies the event subscription mechanism using WS-BaseNotification. Annex C specifies the asynchronous subscription response Option for the two event subscription mechanisms. Annex D shows an example WS-Session WSDL binding with SOAP/HTTP. Annex E lists SOAP XML Templates for ECMA-354 [1] messages. Annex F lists some SOAP XML Templates for WS-Eventing messages. Annex G lists some SOAP XML Templates for WS-BaseNotification messages. Annex H provides a summary of changes.
|
102 431
|
Smart Cards; Test specification for the Transport Protocol of CAT Applications (CAT_TP) validation (Release 7)
|
TS
|
7.1.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102431/07.01.00_60/ts_102431v070100p.pdf
|
The present document covers the minimum characteristics considered necessary in order to provide compliance to TS 102 127 [1]. The present document describes the technical characteristics and methods of test for testing the CAT-TP implementation.
|
102 429-4
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Regenerative Satellite Mesh - B (RSM-B); DVB-S/DVB-RCS family for regenerative satellites; Part 4 : Specific Management Information Base
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10242904/01.01.01_60/ts_10242904v010101p.pdf
|
The present document defines the requirements for the management interface between the Network Management Center (NMC) Sub-System and the Return Channel Satellite Terminal (RCST) within SES BSM Regenerative Satellite Mesh - B (RSM-B) for a DVB-RCS network with Type A terminals. The aim of the present document is to define the specific Management Information Base (MIB) that all RSM-B RCSTs within SES BSM Regenerative Satellite Mesh - B (RSM-B) shall support in addition to DVB-RCS guidelines MIB. Satellite Satellite payload (NOCC) MS U I/F Satellite Terminal Satellite Terminal Terrestrial Host Terrestrial Host T I/F Satellite Terminal Satellite Terminal Terrestrial Host Terrestrial Host U I/F Logical interface Physical interface T I/F P I/F NMC NCC N I/F M I/F M I/F RCST RCST / RSGW OBP N I/F O I/F NOTE: See Part 1 (clause 4.1.5) for interfaces definition. Figure 1: Network architecture
|
102 429-3
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Regenerative Satellite Mesh - B (RSM-B); DVB-S/DVB-RCS family for regenerative satellites; Part 3: Connection control protocol
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10242903/01.01.01_60/ts_10242903v010101p.pdf
|
The present document defines the Connection Control Protocol (C2P) used within SES BSM Regenerative Satellite Mesh – B (RSM-B) to provide connections in a DVB-RCS network using Type A terminals. The C2P is the protocol used for NCC and RCST communication (N interface) . The information elements used to build the C2P messages are identical to the ones defined in EN 301 790 [1] and TR 101 790. The present document includes the definition of the C2P messages and protocol procedures required to support RSM-B system as a connection oriented network. The aim of the present document is a complement for the DVB-RCS and DVB-S standards defining the NCC and RCST interface to ensure RSM-B interworking with IP multimedia networks and services. Satellite Satellite payload (NOCC) MS U I/F Satellite Terminal Satellite Terminal Terrestrial Host Terrestrial Host T I/F Satellite Terminal Satellite Terminal Terrestrial Host Terrestrial Host U I/F Logical interface Physical interface T I/F P I/F NMC NCC N I/F M I/F M I/F RCST RCST / RSGW OBP N I/F O I/F NOTE: See clause 4.1.5 of TS 102 429-1 (see bibliography) for interfaces definition. Figure 1.1: Network architecture
|
102 429-2
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Regenerative Satellite Mesh - B (RSM-B); DVB-S/DVB-RCS family for regenerative satellites; Part 2: Satellite Link Control layer
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10242902/01.01.01_60/ts_10242902v010101p.pdf
|
The present document defines the Satellite Link Layer and the Network Layer used within SES BSM Regenerative Satellite Mesh - B (RSM-B) to provide connections in a DVB-RCS network using Type A terminals. This corresponds to TS 102 429-2 as shown in the figure 1.1. SATELLITE LINK CONTROL PHYSICAL NETWORK LAYER SATLLITE MEDIUM ACCESS CONTROL Transport mechanisms MPE encapsulation Synchronization Power Control Baseband processing Transmission Traffic mapping Connection aggregation Connection Control System & Network configuration Radio Resource Control Session Control M A N A G E M E N T P L A N E Connectivity and support to services Routing Addressing plan handling IP classification RCST ODU U Interface M Interface N Interface C O N T R O L P L A N E Part 1 Part 2 Part 3 Part 4 Figure 1.1: RCST functional layers architecture ETSI ETSI TS 102 429-2 V1.1.1 (2006-10) 7
|
102 429-1
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Regenerative Satellite Mesh - B (RSM-B); DVB-S/DVB-RCS family for regenerative satellites; Part 1: System overview
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/10242901/01.01.01_60/ts_10242901v010101p.pdf
|
The present document is an introduction to SES BSM Regenerative Satellite Mesh - B (RSM-B) system architecture. It contains the description of the overall network and layered architecture of the BSM Regenerative Satellite Mesh - B (RSM-B). RSM-B network combines two standards, DVB-RCS for the uplink signal and DVB-S for the downlink signal. This document also describes the DVB-RCS and DVB-S profiles for the air interfaces so that Return Channel Satellite Terminals (RCSTs) have access to star services, meaning access to terrestrial networks, and mesh services, direct communication between RCSTs in only one hop.
|
102 428
|
Digital Audio Broadcasting (DAB); DMB video service; User application specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102428/01.02.01_60/ts_102428v010201p.pdf
|
The present document specifies the user application for DMB video services carried via DAB. It also includes profile definitions for the application. The user application is delivered using the MSC stream data mode (EN 300 401 [1]) including additional error protection (TS 102 427 [2]). The present document defines the components of the DMB video services; the content compression, the synchronization mechanism and multiplexing mechanism. The components of the DMB service are the video object, the audio object, and the auxiliary media objects. All the objects are packetized and synchronized using MPEG-4 SL (ISO/IEC 14496-1 [4]). The present document also specifies the mechanism for the multiplexing of the multimedia data using MPEG-2 TS (ISO/IEC 14496-1 [4]). For efficiency, some appropriate restrictions to MPEG-4 SL and MPEG-2 TS are specified.
|
102 427
|
Digital Audio Broadcasting (DAB); Data Broadcasting - MPEG-2 TS streaming
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102427/01.01.01_60/ts_102427v010101p.pdf
|
The present document specifies how MPEG-2 Transport Stream can be encapsulated within a DAB MSC stream data sub-channel including additional error protection. The error protection mechanism is composed of a Reed-Solomon coder and an interleaver.
|
102 425
|
Speech and multimedia Transmission Quality (STQ); Digital reference point for speech communication in packet based networks
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102425/01.01.01_60/ts_102425v010101p.pdf
|
The present document introduces the concept of the 0 dBm0 IP reference point, which enables precise and comparable measurements of VoIP speech processing and device performance, including VoIP terminals. In modern telecommunications, ensuring high-quality speech communication over IP-based networks is a critical requirement. With the transition from analog and ISDN networks to all-IP systems, it is essential to establish new reference points and standards for evaluating the quality of Voice over IP (VoIP) devices. The present document focuses on developing a framework for evaluating VoIP device characteristics in a controlled environment. Such a framework minimizes the influence of external network factors, ensuring consistent analysis of parameters such as frequency response, loudness, distortion, and latency. However, the present document does not mandate the implementation of a physical 0 dBm0 IP point; instead, it provides guidelines and requirements for its definition and application.
|
102 424
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Requirements of the NGN network to support Emergency Communication from Citizen to Authority
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102424/01.01.01_60/ts_102424v010101p.pdf
|
The present document contains the requirements of a NGN to support emergency communications (EMTEL) from the citizen to the authority. The requirements are independent of the NGN subsystem and transport layer unless specifically referred to.
|
102 418
|
Access and Terminals (AT); Simultaneous Voice and Text Announcements; PSTN/ISDN; Protocol Description
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102418/01.01.01_60/ts_102418v010101p.pdf
|
The present document specifies the protocol used between information servers and terminals to allow to display text messages on terminals in parallel to voice announcements.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 18)
|
TS
|
18.2.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/18.02.00_60/ts_102412v180200p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 17)
|
TS
|
17.1.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/17.01.00_60/ts_102412v170100p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 16)
|
TS
|
16.4.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/16.04.00_60/ts_102412v160400p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 15)
|
TS
|
15.0.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/15.00.00_60/ts_102412v150000p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 14)
|
TS
|
14.0.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/14.00.00_60/ts_102412v140000p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 13)
|
TS
|
13.0.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/13.00.00_60/ts_102412v130000p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 12)
|
TS
|
12.1.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/12.01.00_60/ts_102412v120100p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 11)
|
TS
|
11.2.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/11.02.00_60/ts_102412v110200p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 10)
|
TS
|
10.3.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/10.03.00_60/ts_102412v100300p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 9)
|
TS
|
9.1.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/09.01.00_60/ts_102412v090100p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 8)
|
TS
|
8.4.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/08.04.00_60/ts_102412v080400p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 412
|
Smart Cards; Smart Card Platform Requirements Stage 1 (Release 7)
|
TS
|
7.8.0
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102412/07.08.00_60/ts_102412v070800p.pdf
|
The present document specifies the additional requirements for Release 7 onwards of the TC SET with respect to earlier releases. The present document covers all the Stage 1 requirements which are not covered by other TC SET stage 1 documents.
|
102 402
|
Satellite Earth Station and systems (SES); Broadband Satellite Multimedia; Transparent Satellite Star - A (TSS-A); DVB-S/DVB-RCS for transparent satellites; Sub-family 1 (TSS-A1)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102400_102499/102402/01.01.01_60/ts_102402v010101p.pdf
|
The present document has been produced by the ETSI Technical Committee Satellite Earth Station and Systems (TC SES) Broadband Satellite Multimedia (BSM) working group. It defines BSM air interface subfamily Transparent Satellite Star - A1 (TSS-A1) using DVB-RCS and DVB-S with transparent satellite so support interworking with IP multimedia and services. The reference architecture (or BSM family, see [1]) is TSS i.e. the satellite is Transparent (bent-pipe), the network is configured according to a Star topology and the return channel passes through the Satellite; the A is to designate the first family envisaged in this family of BSM specifications; the 1, the first subfamily in the TSS-A family [7]. TSS-A subfamilies (system profiles) .. TSS-A2 TSS-A1 TSS-A family (DVB-RCS for transparent satellite) (common elements) Figure 1: BSM TSS-A Air Interface Family document structure The present document is based on the baseline DVB-RCS specification as defined by the SatLabs System Recommendations [15]. Nonetheless, the choice has been made to fully describe some concepts in the present document in order to be self explanatory or to refer to the original standards [2] and [8] where the appropriate level of precision can be found. The key issue of the present document consists of explaining how to map functions or parameters defined above the Satellite Independent Services Access Point (SI-SAP) to the layers downward the SI-SAP (grey part of figure 2, extracted from TR 101 984 [4]). BSM Network MEDIUM ACCESS CONTROL SATELLITE LINK CONTROL TCP/IP interworking core network interface PHYSICAL MEDIUM ACCESS CONTROL SATELLITE LINK CONTROL TCP/IP interworking user network interface PHYSICAL PHYSICAL PHYSICAL To/from Core Network To/from Local Network Air interface Air interface SATELLITE SI-SAP SATELLITE TERMINAL (ST) SATELLITE TERMINAL (ST) SI-SAP Satellite Independent Interface (SI-SAP) Peer-to-peer IP traffic SDAF SDAF SIAF SIAF Figure 2: Satellite sub-network layering ETSI ETSI TS 102 402 V1.1.1 (2005-05) 7
|
102 394
|
Near Field Communication Interfaces and Protocol-1 (NFCIP-1); Protocol Test Methods
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102394/01.01.01_60/ts_102394v010101p.pdf
|
The present document specifies protocol test methods for ECMA-340 [1] in addition to those specified in ECMA-356 [2].
|
102 393
|
Corporate telecommunication Networks (CN); Signalling intetrworking between QSIG and SIP; Call Diversion
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102393/01.01.01_60/ts_102393v010101p.pdf
|
The present document specifies signalling interworking between "QSIG" and the Session Initiation Protocol (SIP) in support of call diversion within corporate telecommunication networks (CN), also known as enterprise networks. "QSIG" is a signalling protocol that operates between Private Integrated services Network eXchanges (PINX) within a Private Integrated Services Network (PISN). A PISN provides circuit-switched basic services and supplementary services to its users. QSIG is specified in Ecma Standards, in particular [1] (call control in support of basic services), [2] (generic functional protocol for the support of supplementary services) and a number of Standards specifying individual supplementary services. Diversion services are specified in [4] and the QSIG signalling protocol in support of these services is specified in [5]. In particular, this signalling protocol signals information about call diversion to the users involved. SIP is an application layer protocol for establishing, terminating and modifying multimedia sessions. It is typically carried over IP [8], [10]. Telephone calls are considered as a type of multimedia session where just audio is exchanged. SIP is defined in [11]. An extension to SIP provides history information [14] that can be used to signal information about the retargeting of a request, in particular a call establishment request, as it is routed through a network. The present document specifies signalling interworking for call diversion during the establishment of calls between a PISN employing QSIG and a corporate IP network employing SIP. It covers both the impact on SIP of call diversion in the QSIG network and the impact on QSIG of request retargeting in the SIP network. Signalling interworking for call diversion operates on top of signalling interworking for basic calls, which is specified in [6]. Call diversion interworking between a PISN employing QSIG and a public IP network employing SIP is outside the scope of the present document. However, the functionality specified in the present document is in principle applicable to such a scenario when deployed in conjunction with other relevant functionality (e.g. number translation, security functions, etc.). The present document is applicable to any interworking unit that can act as a gateway between a PISN employing QSIG and a corporate IP network employing SIP.
|
102 389
|
Broadband Radio Access Networks (BRAN); HiperMAN; Simple Network Management Protocol (SNMP) Management Information Base (MIB)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102389/01.01.01_60/ts_102389v010101p.pdf
|
The scope of the present document is to define the HiperMAN DLC and PHY MIB for the SS and BS, based on HiperMAN PHY and DLC specifications. The definition of managed objects in this MIB is based on SNMPv2 Structure of Management Information (SMI) [4] and Textual Conventions [5]. Therefore, HiperMAN MIB is compliant to SNMPv2, but is backward compatible to SNMPv1 through appropriate translation. Since the HiperMAN MIB has to be accessed through the MIB tree, its relationship with the Interface MIB-RFC 2863 [7] are described. Additional MIBs may be necessary to manage other interfaces in the SS or BS, such as Ethernet, T1/E1 and ATM, but they are outside the scope of the present document.
|
102 386
|
Digital Radio Mondiale (DRM); AM signalling system (AMSS)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102386/01.02.01_60/ts_102386v010201p.pdf
|
The present document defines a system for adding a limited amount of service information to analogue broadcasts in the frequency bands below 30 MHz in a complementary way to the Digital Radio Mondiale (DRM) system. It is intended to be used by broadcasters in the transition to all digital transmission by providing labelling and frequency information for a better user experience.
|
102 385-2
|
Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.2.1; Part 2: Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
2.5.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10238502/02.05.01_60/ts_10238502v020501p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HiperMAN 1.2.1 Data Link Control (DLC) layer. The objective of this test specification is to provide a basis for conformance tests for HiperMAN equipment giving a high probability of air interface inter-operability between different manufacturers' HiperMAN equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology.
|
102 385-2
|
Broadband Radio Access Networks (BRAN); HiperMAN; Conformance testing for the Data Link Control Layer (DLC); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10238502/01.01.01_60/ts_10238502v010101p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HiperMAN 1.2.1 Data Link Control (DLC) layer. The objective of this test specification is to provide a basis for conformance tests for HiperMAN equipment giving a high probability of air interface inter-operability between different manufacturers' HiperMAN equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology.
|
102 385-1
|
Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.2.1; Part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
2.5.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10238501/02.05.01_60/ts_10238501v020501p.pdf
|
The present document specifies the Protocol Implementation Conformance Statement (PICS) for HiperMAN/WiMAX per ISO/IEC 9646-7 [7] and EG 201 058 [9] for conformance of HiperMAN/WiMAX compliant systems. Although this PICS refers to IEEE 802.16e [5], its scope is currently limited to IEEE 802.16 [4] with Corrigendum 1. The items covered by this PICS are also currently restricted to the OFDM + PMP configuration.
|
102 385-1
|
Broadband Radio Access Networks (BRAN); HiperMAN; Conformance testing for the Data Link Control Layer (DLC); Part 1: Procotol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10238501/01.01.01_60/ts_10238501v010101p.pdf
|
The present document specifies the Protocol Implementation Conformance Statement (PICS) for HiperMAN/WiMAX per ISO/IEC 9646-7 [7] and EG 201 058 [9] for conformance of HiperMAN/WiMAX compliant systems. Although this PICS refers to IEEE 802.16e [5], its scope is currently limited to IEEE 802.16 [4] with Corrigendum 1. The items covered by this PICS are also currently restricted to the OFDM + PMP configuration.
|
102 385-3
|
Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.2.1; Part 3: Abstract Test Suite (ATS)
|
TS
|
2.5.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10238503/02.05.01_60/ts_10238503v020501p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test BRAN HiperMAN1.2.1/WiMAX systems for conformance. The objective of the present document is to provide a basis for conformance tests for BRAN HiperMAN/WiMAX equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HiperMAN/WiMAX equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the SS side ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of the SS side ATS.
|
102 392
|
Corporate telecommunication Networks (CN); Signalling interworking between QSIG and SIP; Call Transfer
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102392/01.01.01_60/ts_102392v010101p.pdf
|
The present document specifies call transfer interworking between the Session Initiation Protocol (SIP) and "QSIG" within Corporate telecommunication Networks (CN), also known as enterprise networks. "QSIG" is a signalling protocol that operates between Private Integrated services Network eXchanges (PINX) within a Private Integrated Services Network (PISN). A PISN provides circuit-switched basic services and supplementary services to its users. QSIG is specified in Ecma Standards, in particular [1] (call control in support of basic services), [2] (generic functional protocol for the support of supplementary services) and a number of Standards specifying individual supplementary services. Transfer services are specified in [3], [6] and the QSIG signalling protocol in support of these services is specified in [4] and [7]. In particular, this signalling protocol signals information about call transfer to the users who are involved. NOTE: The name QSIG was derived from the fact that it is used for signalling at the Q reference point. The Q reference point is a point of demarcation between two PINXs. SIP is an application layer protocol for establishing, terminating and modifying multimedia sessions. It is typically carried over IP. Telephone calls are considered as a type of multimedia session where just audio is exchanged. SIP is defined in [10]. As the support of telephony within corporate networks evolves from circuit-switched technology to Internet technology, the two technologies will co-exist in many networks for a period, perhaps several years. Therefore there is a need to be able to establish, modify, terminate and transfer sessions involving participants in the SIP network and participants in the QSIG network. Such calls are supported by gateways that perform interworking between SIP and QSIG. The present document specifies SIP-QSIG signalling interworking for transfer services between a PISN employing QSIG and a corporate IP network employing SIP.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 14)
|
TS
|
14.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/14.00.00_60/ts_102384v140000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 17)
|
TS
|
17.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/17.00.00_60/ts_102384v170000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 16)
|
TS
|
16.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/16.00.00_60/ts_102384v160000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 15)
|
TS
|
15.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/15.00.00_60/ts_102384v150000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 9)
|
TS
|
9.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/09.00.00_60/ts_102384v090000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 12)
|
TS
|
12.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/12.00.00_60/ts_102384v120000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 7)
|
TS
|
7.4.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/07.04.00_60/ts_102384v070400p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 10)
|
TS
|
10.4.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/10.04.00_60/ts_102384v100400p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 381
|
Methods for Testing and Specification (MTS); SS7 Message Transfer Part 3 - User Adaptation Layer (IETF RFC 3332); Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102381/01.01.01_60/ts_102381v010101p.pdf
|
The present document proposes a Test Suite Structure and Test Purposes (TSS&TP) for the SIGTRAN M3UA protocol as described in RFC 3332 [1], "Signalling System 7 (SS7) Message Transfer Part 3 (MTP3) User Adaptation Layer (M3UA)".
|
102 380
|
Methods for Testing and Specification (MTS); SS7 Message Transfer Part 2 - User Adaptation Layer (M2UA); Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102380/01.01.01_60/ts_102380v010101p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS&TP) specification for the M2UA signalling defined in TS 102 141 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-2 [4] and ETS 300 406 [5]. In the present document the test cases are divided into different categories. These categories are as follows: • Valid behaviour tests: Tests that handle valid signalling exchanges of messages, i.e. signalling messages that are properly structured and correctly encoded and are used in the correct sequence. • Inopportune behaviour tests: Tests that handle invalid signalling exchanges of messages, i.e. signalling messages that are properly structured and correctly encoded but are used out of sequence. • Invalid behaviour tests: This test sub-group is intended to verify that the Implementation Under Test (IUT) is able to react properly having received an invalid Protocol Data Unit (PDU).
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 8)
|
TS
|
8.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/08.00.00_60/ts_102384v080000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 11)
|
TS
|
11.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/11.00.00_60/ts_102384v110000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 374-2
|
Methods for Testing and Specification (MTS); Conformance Test Specification for ITU-T H.248.1; Part 2: Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10237402/01.01.01_60/ts_10237402v010101p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for audiovisual and multimedia systems Infrastructure of audiovisual services - Communication procedures, Gateway control protocol defined in ITU-T Recommendation H.248.1 [1] and its corrigendum [2]. The objective of the present document is to provide conformance tests for ITU-T Recommendation H.248.1 [1] equipment giving a greater probability of inter-operability between different manufacturer's H.248.1 [1] equipments. ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4], ISO/IEC 9646-2 [5] and ISO/IEC 9646-3 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [7]) are used as basis for the test methodology.
|
102 374-1
|
Methods for Testing and Specification (MTS); Conformance Test Specification for ITU-T H.248.1; Part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10237401/01.01.01_60/ts_10237401v010101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the audiovisual and multimedia systems Infrastructure of audiovisual services - Communication procedures, Gateway control protocol defined in ITU-T Recommendation H.248.1 [1] and its corrigendum [2] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5] and ETS 300 406 [3]. The supplier of a protocol implementation which is claimed to conform to ITU-T Recommendation H.248.1 [1] and [2] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
102 371
|
Digital Audio Broadcasting (DAB); Digital Radio Mondiale (DRM); Transportation and Binary Encoding Specification for Service and Programme Information (SPI)
|
TS
|
3.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102371/03.03.01_60/ts_102371v030301p.pdf
|
The present document defines how the XML schema data model for Service and Programme Information (SPI) (ETSI TS 102 818 [1]) is profiled, compressed and broadcast. Within the present document the term "DAB" is used to refer to the Digital Audio Broadcasting standard (ETSI EN 300 401 [3]) and "DRM" is used to refer to the Digital Radio Mondiale standard (ETSI ES 201 980 [6]). In respect to previous versions of the present document, voice control provisions have been added and the text has been restructured to reflect the development of SPI service delivery and devices.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 6)
|
TS
|
6.6.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/06.06.00_60/ts_102384v060600p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 369
|
Methods for Testing and Specification (MTS); Stream Control Transmission Protocol (SCTP); Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102369/01.01.01_60/ts_102369v010101p.pdf
|
The present document proposes a Test Suite Structure and Test Purposes (TSS&TP) for the SCTP protocol as described in RFC 2960 [1].
|
102 367
|
Digital Audio Broadcasting (DAB); Conditional access
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102367/01.02.01_60/ts_102367v010201p.pdf
|
Conditional Access systems provide DAB with the ability to deliver encrypted services, both audio and data. The present document specifies a standardized framework that defines how to signal and transport encrypted services within the Digital Audio Broadcasting (DAB) system. The framework is open to the integration of several different Conditional Access systems as well as to the integration of Shared Scrambler Systems.
|
102 374-3
|
Methods for Testing and Specification (MTS); Conformance Test Specification for ITU-T H.248.1; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10237403/01.01.01_60/ts_10237403v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for audiovisual and multimedia systems Infrastructure of audiovisual services - Communication procedures, Gateway control protocol defined in ITU-T Recommendation H.248.1 [1] and its corrigendum [2]. The objective of the present document is to provide conformance tests for ITU-T Recommendation H.248.1 equipment giving a greater probability of inter-operability between different manufacturer's H.248.1 equipments. The present document covers the procedures described in ITU-T Recommendation H.248.1 [1] and its corrigendum [2]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6] and ISO/IEC 9646-2 [7]) as well as the ETSI rules for conformance testing (ETS 300 406 [5]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the partial Protocol Implementation eXtra Information for Testing (PIXIT) Proforma of the ATS. Annex C provides the Protocol Conformance Test Report (PCTR) proforma of the ATS.
|
102 364-1
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); ISDN/PSTN Network Integration Testing for H.323 based trunking; Part 1: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236401/01.01.01_60/ts_10236401v010101p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for Network Integration Testing (NIT) to verify the overall compatibility of ITU-T Recommendation H.323 [2], ISDN and non-ISDN (PSTN) over the national or international H.323 trunking networks. The TSS&TP specification covers the procedures described in ITU-T Recommendation H.323 [2], ITU-T Recommendation H.225.0 [3] as specified in TS 101 883 [1] and ITU-T Recommendation Q.931 [4]. All test purposes are written with reference to ITU-T Recommendation H.246 Annex C [8] which implies the following test architecture: SUT ISUP H.323 ISUP mapping ISDN/ISUP Q.699 mapping ISUP->H323 H.246 Annex C mapping H323->ISUP H.246 Annex C mapping ISUP/ISDNQ. 699 ISDN/PSTN terminal ISDN/PSTN terminal Figure 1: H.323-ISDN inter-working testing architecture via ISUP Two mapping functions are involved. They are specified in ITU-T Recommendation H.246 Annex C [8] (H.323-ISUP) and ITU-T Recommendation Q.699 [14] (ISDN-ISUP).
|
102 362-3
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 3: Abstract Test Suite (ATS)
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236203/01.03.01_60/ts_10236203v010301p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the ERM DMR Call Control (CCL) and Data Link Layer (DLL). The objective of the present document is to provide a basis for conformance tests for ERM DMR equipment giving a high probability of air interface inter-operability between different manufacturer's ERM DMR equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5]) and the ETSI rules for conformance testing (ETS 300 406 [8]) are used as a basis for the test methodology. • Clause 4 describes the Test Configuration used to test the DMR Call Control Layer (CCL) at the MS side and at the BS side. • Clause 5 describes the Test Configurations used to test the DMR Data Link Layer (DLL) at the MS side and at the BS side. • Clause 6 describes the ATS conventions, which are intended to give a better understanding of the ATS. • Annex A provides a guideline for Upper Tester implementation, In-house Testing and Send/Receive of DLL TDMA bursts. • Annex B provides the Tree and Tabular Combined Notation (TTCN-3) part of the ATS. • Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of DMR. • Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of DMR.
|
102 362-2
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236202/01.03.01_60/ts_10236202v010301p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the ERM DMR Call Control Layer (CCL) and Data Link Layer (DLL). The objective of the present document is to provide a basis for conformance tests for DMR equipment giving a high probability of air interface inter-operability between different manufacturers' DMR equipment. The ISO standard for the methodology of conformance testing, ISO/IEC 9646-1 [7], the ETSI rules for conformance testing, ETS 300 406 [6], are used as a basis for the test methodology.
|
102 361-4
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 4: DMR trunking protocol
|
TS
|
1.12.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236104/01.12.01_60/ts_10236104v011201p.pdf
|
The present document contains technical requirements for Digital Mobile Radio (DMR) trunking systems operating in the existing licensed land mobile service frequency bands, as identified in CEPT/ERC/T/R 25-08 [i.5]. The present document describes the trunking services and facilities protocol of a scalable Digital Mobile Radio system, which covers three tiers of possible products: Tier I: DMR equipment having an integral antenna and working in Direct Mode (unit-to-unit) under a general authorization with no individual rights operation. Tier II: DMR systems operating under individual licences working in Direct Mode (unit-to-unit) or using a Base Station (BS) for repeating. Tier III: DMR trunking systems under individual licences operating with a controller function that automatically regulates the communications. NOTE: Tier II and Tier III products encompass both simulcast and non-simulcast systems. The DMR air interface complies with either ETSI EN 300 113 [i.2] and [i.3] or ETSI EN 300 390 [i.4], that have been specifically developed with the intention of being suitable for all identified product tiers. The DMR protocol is intended to be applicable to the land mobile service frequency bands, physical channel offset, duplex spacing, range assumptions and all other spectrum parameters without need for any change.
|
102 366
|
Digital Audio Compression (AC-3, Enhanced AC-3) Standard
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102366/01.04.01_60/ts_102366v010401p.pdf
|
The present document specifies two coded representations of audio information, and specifies the decoding process for each coded representation. Informative information on the encoding process is included. The coded representations specified herein are suitable for use in digital audio transmission and storage applications. The coded representations may convey multiple full bandwidth audio signals, along with a low frequency enhancement signal. A wide range of encoded bit-rates is supported by the present document. A short form designation of the audio coding algorithm specified in the body of the present document (whether or not annex D is included) is "AC-3". The short form designation of the audio coding algorithm specified in annex E is "E-AC-3".
|
102 371
|
Digital Audio Broadcasting (DAB); Digital Radio Mondiale (DRM); Transportation and Binary Encoding Specification for Electronic Programme Guide (EPG)
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102371/01.03.01_60/ts_102371v010301p.pdf
|
The present document defines how the XML schema data model for Service and Programme Information (SPI) (ETSI TS 102 818 [1]) is profiled, compressed and broadcast. Within the present document the term "DAB" is used to refer to the Digital Audio Broadcasting standard (ETSI EN 300 401 [3]) and "DRM" is used to refer to the Digital Radio Mondiale standard (ETSI ES 201 980 [6]). In respect to previous versions of the present document, voice control provisions have been added and the text has been restructured to reflect the development of SPI service delivery and devices.
|
102 384
|
Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 13)
|
TS
|
13.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102384/13.00.00_60/ts_102384v130000p.pdf
|
The present document describes the technical characteristics and methods of test for testing the Card Application Toolkit implemented in Terminals for the UICC, in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETSI ETS 300 406 [i.2]. The present document covers the minimum characteristics considered necessary in order to provide sufficient performance for Terminal and to prevent interference to other services or to other users. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the ETSI-series of technical specifications. The present document neither replaces any of the other ETSI technical specifications or ETSI related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the NAA. The present document lists the requirements, and provides the methods of test for testing the Card Application Toolkit implemented in a Terminal for conformance to the ETSI standard. For a full description of the system, reference should be made to all the ETSI technical specifications or ETSI related ETSs or ENs. Clause 2 provides a complete list of the ETSI technical specifications, ETSI related ETSs, ENs, and ETRs, on which this conformance test specifications is based. If there is a difference between this present conformance document, and any other ETSI technical specification or ETSI related ETS or EN, then the other ETSI technical specification or ETSI related ETS or EN is to be considered the authoritative reference.
|
102 362-1
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Digital Mobile Radio (DMR); Part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236201/01.03.01_60/ts_10236201v010301p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Data Link Layer (DLL) and Call Control Layer (CCL) of Digital Mobile Radio (DMR) as defined in TS 102 361-1 [1], TS 102 361-2 [2], TS 102 361-3 [3], and TS 102 361-4 [4] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [6] and ETS 300 406 [7]. The present document details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
102 379
|
Digital Enhanced Cordless Telecommunications (DECT); Fixed network Multimedia Message Service (F-MMS) Interworking Profile
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102379/01.01.01_60/ts_102379v010101p.pdf
|
The present document specifies that set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Part (FP) and DECT Portable Part (PP) necessary for the support and provision to the user of Multimedia Messaging Services (MMS) when provided over a fixed line access network. From architectural point of view the present document specifies an End System (ES) configuration, which assumes termination of many of the protocols required by the Fixed line Multimedia Messaging Service (F-MMS) as defined in ES 202 314-4 [17] in the DECT Fixed Termination (FT) and transport of as minimum as possible however sufficient for the service operation data over the DECT air interface to the DECT Portable Termination (PT). NOTE: The specified requirements can be applied also for the provision of MMS services in a business system, e.g. IP based PBX, that has fully implemented the requirements of the F-MMS services as defined in ES 202 314-4 [17]. The specification aims at ensuring interoperability between FTs and PTs from different vendors and minimum cost load on the DECT portable side.
|
102 361-3
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 3: DMR data protocol
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236103/01.03.01_60/ts_10236103v010301p.pdf
|
The present document contains technical requirements for Digital Mobile Radio (DMR) operating in the existing licensed land mobile service frequency bands, as identified in CEPT/ERC T/R 25-08 [3]. The present document describes the packet data protocol (PDP) of a scalable Digital Mobile Radio system which covers three tiers of possible products: Tier I: DMR equipment having an integral antenna and working in direct mode (communication without infrastructure) under a general authorization with no individual rights operation. Tier II: DMR systems operating under individual licences working in direct mode or using a Base Station (BS) for repeating. Tier III: DMR trunking systems under individual licences operating with a controller function that automatically regulates the communications. NOTE 1: Tier II and Tier III products encompass both simulcast and non-simulcast systems. NOTE 2: The three tiers of possible products will work only independently and not interoperable. The present document specifies the Packet Data Protocol (PDP) of DMR that has been specifically developed with the intention of being suitable for all identified product tiers. The DMR protocol is intended to be applicable to the land mobile frequency bands, physical channel offset, duplex spacing, range assumptions and all other spectrum parameters without need for any change.
|
102 358
|
Digital Radio Mondiale (DRM); Specific Restrictions for the use of the Distribution and Communication Protocol (DCP)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102358/01.01.01_60/ts_102358v010101p.pdf
|
The present document extends and regulates in detail some aspects of the generic and application-independent Distribution and Communication Protocol (DCP) to build a common basis for all DCP-based application protocols standardized within the scope of Digital Radio Mondiale (DRM) see ES 201 980 [1]. These DRM-specific application protocols comprise for example the Multiplex Distribution Interface (MDI), the Modulator Control Interface (MCI), the Service Distribution Interface (SDI), the Receiver Status and Control Interface (RSCI), and others. The definitions and restrictions to the DCP protocol given in the present document are mandatory for all DCP-based DRM application protocols.
|
102 354
|
Satellite Earth Stations and Systems (SES); Transparent Satellite Star - B (TSS-B); IP over Satellite (IPoS) Air Interface Specification [TIA-1008-B (April 2012)]
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102354/01.03.01_60/ts_102354v010301p.pdf
|
The present document is an endorsement of the TIA Document TIA-1008-B; "IP over Satellite (IPoS)". The present document is used to incorporate this air interface into the BSM family of air interfaces. This air interface has been assigned the name Transparent Satellite Star - B (TSS-B) using the BSM naming conventions for air interface families (see [i.1]). The entire unchanged endorsed document is contained in an Adobe Portable Document Format™ file (TIA-1008-B.pdf reproduced under written permission from Telecommunications Industry Association and contained in archive ts_102354v010301p0.zip) which accompanies the present document. ETSI ETSI TS 102 354 V1.3.1 (2013-05) 6
|
102 352
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Transparent Satellite Star - A (TSS-A); DVB-S/DVB-RCS for transparent satellites
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102352/01.01.01_60/ts_102352v010101p.pdf
|
The present document defines a top-level framework for DVB-S/DVB-RCS air interfaces as defined in EN 301 790 [1] when used for transparent satellites. This framework is used to incorporate this air interface into the BSM families of air interfaces. This air interface has been assigned the BSM name Transparent Satellite Star - A (TSS-A) using the BSM naming conventions for air interface families (TR 102 287 [3]).
|
102 351
|
Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: Methodology and Framework
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102351/02.01.01_60/ts_102351v020101p.pdf
|
The present document gives guidelines for the use of a common method for developing test specifications for IPv6. This method is applicable to all IPv6 categories including the core specification, mobility, security and transitioning to IPv6 from IPv4. The underlying method is based on the methodologies specified in ISO/IEC 9646-1 [4] for conformance tests and TS 102 237-1 [1] for interoperability tests. It provides guidance on the development and use of the following key elements of the method: - a Requirements Catalogue (RC); - a Test Suite Structure (TSS) and Test Purposes (TP); - Test Descriptions (TD) - interoperability; - a TTCN-3 library of data types and values, templates and functions; - an Abstract Test Suite (ATS) - conformance. The methodology also offers guidance on naming conventions and other style-related issues. Although the present document has been developed primarily for use in the testing of IPv6 standards, it could equally be used in other areas of protocol test specification.
|
102 361-1
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 1: DMR Air Interface (AI) protocol
|
TS
|
1.4.5
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236101/01.04.05_60/ts_10236101v010405p.pdf
|
The present document contains technical requirements for Digital Mobile Radio (DMR) operating in the existing licensed land mobile service frequency bands, as identified in CEPT/ERC/T/R 25-08 [i.3]. The present document describes the Air Interface of a scalable Digital Mobile Radio system which covers three tiers of possible products: • Tier I: DMR equipment having an integral antenna and working in direct mode (communication without infrastructure) under a general authorization with no individual rights operation. • Tier II: DMR systems operating under individual licences working in direct mode or using a Base Station (BS) for repeating. • Tier III: DMR trunking systems under individual licences operating with a controller function that automatically regulates the communications. NOTE 1: Tier II and Tier III products encompass both simulcast and non-simulcast systems. NOTE 2: The three tiers of possible products only work independently and there is no interoperability across the tiers. (For more information see the System reference documents ETSI TR 102 335-1 [i.1] and ETSI TR 102 335-2 [i.2].) The present document specifies the Air Interface, complying with either ETSI EN 300 113-1 [1] and ETSI EN 300 113-2 [2] or ETSI EN 300 390-1 [3] and ETSI EN 300 390-2 [4], that has been specifically developed with the intention of being suitable for all identified product tiers. A polite spectrum access protocol for sharing the physical channel has also been specified. Specifically, in this case for use in the existing land mobile service bands with the intention of causing minimum change to the spectrum planning and regulations. Thus the DMR protocol is intended to be applicable to the land mobile frequency bands, physical channel offset, duplex spacing, range assumptions and all other spectrum parameters without need for any change.
|
102 359
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Equipment Information in the Management Information Base (MIB)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102359/01.02.01_60/ts_102359v010201p.pdf
|
The present document specifies equipment identity and location data that should be included, when relevant, in the equipment Management Information Base (MIB) to support inventory processes amongst for example Service Providers and Manufacturers. This work item extends the equipment information work i.e. TR 102 214 [2] and TS 102 209 [1].
|
102 349
|
Digital Radio Mondiale (DRM); Receiver Status and Control Interface (RSCI)
|
TS
|
3.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102349/03.01.01_60/ts_102349v030101p.pdf
|
The present document defines the actual content to be transported in the DRM-specific protocol Receiver Status and Control Interface (RSCI) based on the generic and application-independent Distribution and Communications Protocol (DCP) [2]. The RSCI protocol covers the transport of receiver's status information (output protocol) in addition to the DRM multiplex as well as commands (control protocol) to control the receiver's behaviour. The available TAG items for the RSCI TAG layer within the DCP protocol are defined in the present document. The present document has been revised to provide full support for the xHE-AAC audio codec.
|
102 349
|
Digital Radio Mondiale (DRM); Receiver Status and Control Interface (RSCI)
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102349/01.03.01_60/ts_102349v010301p.pdf
|
The present document defines the actual content to be transported in the DRM-specific protocol Receiver Status and Control Interface (RSCI) based on the generic and application-independent Distribution and Communications Protocol (DCP) [2]. The RSCI protocol covers the transport of receiver's status information (output protocol) in addition to the DRM multiplex as well as commands (control protocol) to control the receiver's behaviour. The available TAG items for the RSCI TAG layer within the DCP protocol are defined in the present document. The present document has been revised to provide full support for the xHE-AAC audio codec.
|
102 361-2
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems; Part 2: DMR voice and generic services and facilities
|
TS
|
2.5.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10236102/02.05.01_60/ts_10236102v020501p.pdf
|
The present document contains technical requirements for Digital Mobile Radio (DMR) operating in the existing licensed land mobile service frequency bands, as identified in CEPT/ERC/T/R 25-08 [i.1]. The present document describes the voice and generic services and facilities of a scalable Digital Mobile Radio system which covers three tiers of possible products: Tier I: DMR equipment having an integral antenna and working in direct mode (communication without infrastructure) under a general authorization with no individual rights operation. Tier II: DMR systems operating under individual licences working in direct mode (unit-to-unit) or using a Base Station (BS) for repeating. Tier III: DMR trunking systems under individual licences operating with a controller function that automatically regulates the communications. NOTE 1: Tier II and Tier III products encompass both simulcast and non-simulcast systems. NOTE 2: The three tiers of possible products only work independently and there is no interoperability across the tiers. The present document specifies the voice and generic services and facilities of DMR that has been specifically developed with the intention of being suitable for all identified product tiers. The DMR protocol is intended to be applicable to the land mobile frequency bands, physical channel offset, duplex spacing, range assumptions and all other spectrum parameters without need for any change.
|
102 344
|
Application session services
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102344/01.01.01_60/ts_102344v010101p.pdf
|
The services defined in the present document are used to establish and maintain a relationship between an application and a server for the purpose of exchanging application messages. For the purpose of the present document this relationship is called an application session. Application protocols, such as ECMA-323, require that an application session is established before application messages are exchanged. ECMA-269 specifies several mechanisms for establishing an application context. One possible mechanism is ACSE (ISO/IEC 8649) – but since ASCE uses ASN.1 encoding for its services, it is not desirable for use with XML based protocols such as ECMA-323. The present document provides an XML-based alternative for establishing application sessions.
|
102 342
|
Digital Enhanced Cordless Telecommunications (DECT); Cordless multimedia communication system; Open Data Access Profile (ODAP)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102342/01.02.01_60/ts_102342v010201p.pdf
|
The present document specifies that set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Part (FP) and DECT Portable Part (PP) necessary for the support the Open Data Access Profile (ODAP). It defines a common architecture and protocol to support home and industrial sensors, alarms, telematics and other Machine-to-Machine (M2M) messages. The present document aims at ensuring low cost terminals and an easy to use application interface. It covers three interfaces: • DECT air interface. • The client to server ODAP application interface. • Tethered PP interface to external equipment.
|
102 338
|
Digital Celullar Telecommunications System (Phase 2 & Phase 2+) Global System for Mobile communication (GSM); System Definition
|
TS
|
1.0.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102338/01.00.00_60/ts_102338v010000p.pdf
|
The present document provides a complete definition of the GSM mobile system by referencing the compendium documents of the suite of technical specifications for each Release. Harmonized Standards used in the European Union to show conformity to European regional regulations are beyond the scope of the present document. The GSM specification numbering scheme and Release mechanism is described.
|
102 337
|
Access and Terminals (AT); Short Message Service (SMS) for PSTN/ISDN; Short Message Communication between a fixed network Short Message Terminal Equipment and a Short Message Service Centre: Overview of SMS for the User Based Solution
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102337/01.01.01_60/ts_102337v010101p.pdf
|
The present document gives an overview of the set of documents being relevant for the support of the Fixed Network Short Message Service in PSTN and ISDN using the so called "User Based Solution".
|
102 334-4
|
Network Address Book on fixed network; Part 4: Data synchronization
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10233404/01.01.02_60/ts_10233404v010102p.pdf
|
The present document defines requirements for the use of OMA DS 1.2 for fixed-line devices. The present document defines contact information exchange format to be used for contact synchronization with OMA DS 1.2.
|
102 334-3
|
Network Address Book on fixed network; Part 3: vCard 2.1 profile for contact exchange by SMS/EMS for fixed network
|
TS
|
1.2.2
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10233403/01.02.02_60/ts_10233403v010202p.pdf
|
The present document provides some recommendations for implementation of vCard in fixed networks. The present document defines a way to transfer personal information between a fixed line phone and either an other fixed line phone or a server in fixed networks. Furthermore, interoperability with other terminals (e.g. mobile phones) is made possible. The present document defines the data model, format and transport used to perform this operation. The present document uses for the data model and format a profile of vCard 2.1.
|
102 334-2
|
Network Address Book on fixed network; Part 2: Service description
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10233402/01.01.02_60/ts_10233402v010102p.pdf
|
The present document defines the stage 1 service description of the Network Address Book service on fixed network independent of the technology. Stage 1 is an overall service description, primarily from the service provider and user's point of view, but does not deal with the details of the human interface itself. The present document includes information applicable to service providers and equipment manufacturers. The present document contains the description of the core service features and also optional service features within the Network Address Book Service. The service may be provided on the basis of the core requirements alone. Furthermore, additional functionalities not covered in the present document may be implemented. Charging principles are outside the scope of the present document.
|
102 334-1
|
Network Address Book on fixed network; Part 1: Overview
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10233401/01.01.02_60/ts_10233401v010102p.pdf
|
The present document gives an overview of the set of documents being relevant for the support of the Network Address Book on fixed networks (PSTN/ISDN).
|
102 333
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Gate control protocol
|
TS
|
1.2.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102333/01.02.00_60/ts_102333v010200p.pdf
|
The present document defines a profile of the MEGACO protocol for controlling gates between IP transport domains. It also defines specific packages that are required by this profile specification.
|
102 332
|
Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Bachauling of ISDN Q.921 (Transport of DSS1 over IP); ISDN Q.921-User Adaptation Layer (IUA) [Endorsement of RFC 3057 (2001), modified]
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102332/01.01.01_60/ts_102332v010101p.pdf
|
The present document specifies the requirements for the ISDN Q.921-User Adaptation Layer (IUA) when used in conjunction with the SCTP layer for the transport of Digitals Subscriber Signalling System No.1 (DSS1) messages over the Internet Protocol (IP). The present document endorses and constrains where relevant the IUA defined in RFC 3057 [1].
|
102 331
|
Access and Terminals (AT); Short Message Service (SMS) for PSTN/ISDN; Overview of SMS for the User Based Solution and the Network Based Solution
|
TS
|
1.2.2
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102331/01.02.02_60/ts_102331v010202p.pdf
|
The present document gives an overview of the set of documents being relevant for the support of the Fixed Network Short Message Service in PSTN and ISDN using the so called "User Based Solution" and/or "Network Based Solution". NOTE: Whenever a new part will be created, the present document shall be updated.
|
102 330
|
Access and Terminals (AT); Portable Service Format (PSF) for Interactive Home Devices
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102330/01.01.01_60/ts_102330v010101p.pdf
|
The present document endorses Declarative Data Essence - Transitional [DDE-T], an existing standardized portable format for interactive television, for use on a wider range of interactive home devices such as home PCs and PDAs. The present document document also contains informative background on the capabilities of DDE-T, including representative examples of the sample code and figures illustrating the use of key elements.
|
102 323
|
Digital Video Broadcasting (DVB); Carriage and signalling of TV-Anytime information in DVB transport streams
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102323/01.05.01_60/ts_102323v010501p.pdf
|
The present document describes a method of supporting personal digital recorders (PDRs) in DVB broadcast networks. It was developed to fulfil the commercial requirements for supporting PDRs. The data types and protocols defined in the present document are based upon TV-Anytime phase 1 specifications [3], [4], [5] and [6].
|
102 322
|
Specification for a Lightweight Microbrowser for interactive tv applications, based on and compatible with WML
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102322/01.01.01_60/ts_102322v010101p.pdf
|
The present document is the initial public release of WTVML. WTVML is an evolving standard designed to provide a device independent means to author service applications for televisions and other similarly capable small foot-print devices. The growth of Digital TV receivers around the world is probably the most significant area or growth in digital devices, as PC based Internet and Mobile devices all reach maturity or saturation. The need for a common authoring format for Interactive TV services is therefore clear, and yet the market is moving too quickly for it to stop and re-define a new format for television. It is with this in mind, and the belief that all Digital TV operators (including BSkyB) will benefit from a growth and in standardization of the Interactive Services marketplace on a pan-national scale, that this tried and tested format is submitted to the Industry. WTVML is a mature markup language based on XML. It is a derivation of WML 1.3 as defined as part of the OMA's WAP 1.2.1 specifications, and is designed to deliver and specify content and user interfaces for Digital TV set-top-boxes and other similarly specified devices. WTVML is designed with the constraints of the television in mind: These constraints include: • Relatively small display and limited input facilities. • Narrow band or absent network connection (return path). • Limited memory and computational resources. • The need for precise televisual control over positioning and style. • The need to deliver consistent user interface behaviours and minimize the authoring effort to achieve them. WTVML contains the following major functional areas: • Dynamic text presentation and layout, including images support, formatting and sophisticated layout commands. • Overall screen and style control, allowing the definition of screen templates (Modes) involving various high level objects types such as AV windows, browsers, menus, images etc. • Sophisticated navigation model, where content can be organized into Cards and Decks. Cards specify one or more units of user interaction. Cards can be grouped into decks. A WTVML deck is similar to an HTML page in that it is defined by a URL (see RFC 2396 [2]) and is the unit of content transmission. Decks can reference different "Modes", as well as other resources. • WTVML includes support for explicitly managing the navigation between cards and decks. WTVML also includes provisions for event handling in the device, which may be used for navigational purposes or to execute scripts or reset or change any attribute in the DOM or mode. WML also supports anchored links, similar to those found in HTML 4.0 Specification [1]. • String parameterization and state management - all WTVML decks can be parameterized using a state model. Variables can be used in the place of strings and are substituted at run-time. This parameterization allows for more efficient use of network resources, and very dynamic templated applications to be created. WTVML can completely describe the user interface look, feel behaviour, and state models of an Interactive TV application. WTVML does this due to its sophisticated DTD and defined User Agent behaviour. Application UI effects are created by manipulating the WTVML elements and attributes directly, and rarely with the use of Script. This ensures that WTVML applications are "portable" with the fixed behaviour mapping well onto a number of set-top-box run time environments, through fixed transformations or compile steps. ETSI ETSI TS 102 322 V1.1.1 (2004-05) 15
|
102 321
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Normalized Site Attenuation (NSA) and validation of a fully lined anechoic chamber up to 40 GHz
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102321/01.01.01_60/ts_102321v010101p.pdf
|
The present document details verification procedure for anechoic chambers used as test sites for radiated Radio Frequency (RF) testing on radio equipment and additionally provides the methods for evaluating the associated measurement uncertainties. The present document has been produced in the absence of standardized validation procedures for fully lined anechoic chambers over the current test frequency range of 30 MHz to 40 GHz. The present document provides validation methods that can be used together with all applicable standards and (E)TRs, supports TR 100 027 [10] and may be used in association with TR 100 028 [9].
|
102 318
|
Access and Terminals (AT); Digital Broadband Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Protocol Implementation Conformance Statement (PICS); Internet Protocol Access Terminal - Line Control Signalling
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102318/01.01.01_60/ts_102318v010101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Network- based Call Signalling, Dynamic Quality of Service, Provisioning and Security protocols together with the ETSI V5 mapping for the IPCablecom (packet-based multimedia communication) system defined in TS 101 909-4 [2], TS 101 909-5 [3], TS 101 909-6 [4], TS 101 909-7 [5], TS 101 909-8 [6], TS 101 909-9 [7], TS 101 909-11 [8], TS 101 909-23 [10], in compliance with the relevant requirements specified in those specifications and in accordance with the relevant guidance given in ISO/IEC 9646-7 [26]. The supplier of a protocol implementation which is claimed to conform to is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
102 314-7
|
Fixed network Multimedia Messaging Service (F-MMS); Part 7: Over-The-Line configuration of F-MMS terminal settings
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10231407/01.01.02_60/ts_10231407v010102p.pdf
|
The present document describes a mechanism for the configuration of F-MMS terminal settings by means of configuration messages.
|
102 314-1
|
Fixed network Multimedia Messaging Service (F-MMS); Part 1: Overview
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/10231401/01.02.01_60/ts_10231401v010201p.pdf
|
The present document gives an overview of the set of documents being relevant for the support of the Fixed Network Multimedia Messaging Service via PSTN, ISDN and broadband accesses.
|
102 312
|
Near Field Communication Interface and Protocol-2 (NFCIP-2)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102312/01.01.01_60/ts_102312v010101p.pdf
|
ECMA-340 [1], ISO/IEC 14443 [2] and ISO/IEC 15693 [3] specify the RF signal interface, initialization, anti-collision and protocols for wireless interconnection of closely coupled devices and access to contactless integrated circuit cards operating at 13,56 MHz. The present document specifies the communication mode selection mechanism, designed to not disturb any ongoing communication at 13,56 MHz, for devices implementing ECMA-340 [1] and the reader functionality for integrated circuit cards compliant to ISO/IEC 14443 [2] or ISO/IEC 15693 [3]. The present document requires implementations to enter the selected communication mode as specified in the respective standard. The communication mode specifications, however, are outside the scope of the present document.
|
102 310
|
Smart Cards; Extensible Authentication Protocol support in the UICC (Release 9)
|
TS
|
9.1.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102310/09.01.00_60/ts_102310v090100p.pdf
|
The present document defines additional features that are to be provided by the UICC to support EAP authentication capabilities. The goal of these new features is to adapt the UICC to provide support of different EAP methods, ensuring interoperability between the UICC and any terminal independently of their respective manufacturers. The present document defines: • The architectural framework. • The additional commands required.
|
102 310
|
Smart Cards; Extensible Authentication Protocol support in the UICC (Release 8)
|
TS
|
8.3.0
|
http://www.etsi.org/deliver/etsi_ts/102300_102399/102310/08.03.00_60/ts_102310v080300p.pdf
|
The present document defines additional features that are to be provided by the UICC to support EAP authentication capabilities. The goal of these new features is to adapt the UICC to provide support of different EAP methods, ensuring interoperability between the UICC and any terminal independently of their respective manufacturers. The present document defines: • The architectural framework. • The additional commands required.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.