hash stringlengths 32 32 | doc_id stringlengths 7 13 | section stringlengths 3 121 | content stringlengths 0 2.2M |
|---|---|---|---|
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.1.10 Receipt of the Release message BYE / CANCEL | TP110001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 6.11.1 TSS reference SIP-ISUP/Basic call/ Receipt of the BYE-CANCEL message SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT on receipt of SIP BYE , the SUT shall send an ISUP REL with the cause value # 16 to the IS... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.1.12 Receipt of the Suspend message (SUS) network initiated | TP112001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 6.9 TSS reference SIP-ISUP/Basic call/ receipt of a SUSPEND message with the suspend indicator set to "network initiated" SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT, on receipt of a SUSPEND message with the su... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.1.13 Receipt of the RESume message (RES) network initiated | TP113001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 6.10 TSS reference SIP-ISUP/Basic call/ SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT, on receipt of a RESUME message containing the suspend/resume indicator set to "network initiated": • the RES is transferred i... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.1.14 Receipt of Confusion message | TP114001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause A.1.1.3 TSS reference ISUP-SIP/ISUP Messages for special consideration / Confusion message SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT after receiving the INVITE with encapsulated IAM that contains an unknown p... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.1.15 Segmentation | TP115001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause A.1.1.3.1 TSS reference ISUP-SIP/ISUP Messages for special consideration/Receipt of a user part test message SIP selection criteria ISUP selection criteria Test purpose Ensure that a call can be successfully completed if segmentation applies in b... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2 Interworking from ISUP to SIP-I | |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.1 Sending of the INVITE message | TP301001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 7.1 1 a) TSS reference ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number and ... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.2 Receipt of the SAM message after INVITE has been send | TP302001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 7.2 TSS reference ISUP-SIP/Basic call/Receipt of SAM after INVITE has been sent SIP selection criteria PICS 3/1 ISUP selection criteria Test purpose Ensure if the SUT is supporting en bloc addressing towards the SIP network, subsequent SAMs recei... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.3 Sending of the ACM message | TP303001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 7.1, Q.764 [i.12], clause 2.1.4.8 TSS reference ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria PICS 1/3 ISUP selection criteria PICS 4/9 Test purpose Ensure that the SUT in Idle state, on receipt of an IAM message containi... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.4 Sending of the CPG message | TP304001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 7.1 and 7.3.1 TSS reference ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria PICS 3/1 ISUP selection criteria PICS 3/8 Test purpose Ensure that the SUT, having sent a ACM message with called party status "no indication" on... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.5 Sending of the ANM message | TP305001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 7.5 TSS reference ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT having sent the ANM message, on receipt of a 200 OK INVITE for this call, it shall stop ti... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.6 Sending of the CON message | TP306001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 7.5 and 7.5.1 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT, having not sent the ACM message, on receipt of a 200 OK INVITE for this call... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.7 Receipt of the Release message (REL) | TP307001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 7.7.1, 1) TSS reference ISUP-SIP/Basic call/ Receipt of the Release message (REL)/ SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT after receiving the IAM but before an INVITE has been sent. On receipt of a REL mes... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.8 Sending of a REL message (REL) / receipt of a backward BYE | TP308002 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause 7.7.6 TSS reference ISUP-SIP /Basic call/ Sending of the Release message (REL)/ SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT after receiving the IAM sends out an INVITE message. On receipt of a Failure message (... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.9 Autonomous release at O-IWU | |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.9.1 Receipt of Reset Circuit message (RSC) | TP309001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 7.7.1, 1), 7.7.4 and 7.7.5 TSS reference ISUP-SIP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria ... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.9.2 Receipt of Circuit group reset message (GRS) | TP309007 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 7.7.1, 1), 7.7.4 and 7.7.5 TSS reference ISUP-SIP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria ... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.9.3 Receipt of Circuit group blocking message (CGB) | TP3090014 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 7.7.1, 1) and 7.7.4 TSS reference ISUP-SIP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria ISUP s... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.10 Receipt of Confusion message | TP310001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause A.1.1.3 TSS reference ISUP-SIP/ISUP Messages for special consideration / Confusion message SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT after receiving the IAM with the complete called party number and contains ... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.11 Receipt of "Suspend" or "Resume" message | TP311001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause A.1.1.3 TSS reference ISUP-SIP/ISUP Messages for special consideration/Receipt of Suspend message SIP selection criteria ISUP selection criteria Test purpose Ensure that the SUT after receiving the IAM with the complete called party number, sendi... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.12 Receipt of a Blocking message | TP312001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause A.1.1.3.1 TSS reference ISUP-SIP/ISUP Messages for special consideration/Receipt of a Blocking message SIP selection criteria ISUP selection criteria Test purpose Ensure that the blocking/unblocking procedure can be correctly initiated. Ensure th... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.13 Receipt of a user part test message | TP313001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause A.1.1.3.1 Q.784 [i.11], clause 1.3.2.4 TSS reference ISUP-SIP/ISUP Messages for special consideration/Receipt of a user part test message SIP selection criteria ISUP selection criteria PICS 4/22 Test purpose Ensure that on receipt of a user part ... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.2.2.14 Segmentation | TP314001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause A.1.1.3.1 TSS reference ISUP-SIP/ISUP Messages for special consideration/Receipt of a user part test message SIP selection criteria ISUP selection criteria Test purpose Ensure that a call can be successfully completed if segmentation applies in f... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3 Test purposes for the Supplementary Services | |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.1 Calling Line Identification Presentation (CLIP) | TP401001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 7.1.3 and B.1 TSS reference ISUP-SIP-ISUP/SS/CLIP SIP selection criteria ISUP selection criteria Test purpose Calling Party number network provided, transferred in O-MGCF Ensure that the SUT can successfully transmit a call having a calling part... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.2 Calling Line Identification Restriction (CLIR) | TP402001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 7.1.3 and B.1, Q.731 [i.2], clause 4.5.2.1.1 TSS reference: ISUP-SIP-ISUP/SS/CLIR SIP selection criteria ISUP selection criteria Test purpose Calling party number network provided presentation restricted is passed. Ensure that the SUT can succes... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.3 Connected line identification presentation (COLP) | TP403001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.2, Q.731 [i.2], clause 5.5.2.1.1 TSS reference ISUP-SIP-ISUP/SS/COLP SIP selection criteria ISUP selection criteria Test purpose Initiate COLP request Ensure that the exchange can initiate successfully a call requesting the COLP service in the ... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.4 Connected Line Identification Restriction (COLR) | TP404001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.2, Q.731 [i.2], clause 6.5.2.1.1 TSS reference ISUP-SIP-ISUP/SS/COLR SIP selection criteria ISUP selection criteria Test purpose Passing on information relating to COLR Ensure that the SUT shall pass transparently all information related to the... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.5 Terminal Portability (TP) | TP405001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.13, Q.733 [i.6], clause 4.5.2.1 TSS reference: ISUP-SIP-ISUP/SS/TP SIP selection criteria ISUP selection criteria Test purpose Terminal portability, requested by the calling party Ensure that SUT informs the called party that a suspend and a re... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.6 SUB-addressing (SUB) | TP406001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.5, Q.731 [i.2], clause 8.5.2.1.1 TSS reference: ISUP-SIP-ISUP/SS/SUB SIP selection criteria ISUP selection criteria Test purpose Sending the called sub-address in the access transport parameter Ensure that the SUT can include the called sub-add... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.7 Malicious Call Identification (MCID) | TP407001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.4, Q.731.7 [i.3], clause 7.5.2.1.1 TSS reference: ISUP-SIP-ISUP/SS/MCID SIP selection criteria ISUP selection criteria Test purpose Successful MCID request O-MGCF Ensure that the SUT can successfully pass on a 183 Session Progress containing an... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.8 Call hold (HOLD) | TP408001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], table B.10-2, Q.733 [i.6], clauses 2.5.2.1.1.1 and 2.5.2.1.1.2 TSS reference ISUP-SIP-ISUP/SS/HOLD SIP selection criteria ISUP selection criteria Test purpose Call hold after answer, requested by the originating user Ensure that the notifications that a... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.9 Call Waiting (CW) | TP409001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.9, Q.733 [i.6], clause 1.5.2.1.1 TSS reference: ISUP-SIP-ISUP/SS/CW SIP selection criteria ISUP selection criteria Test purpose Call waiting indication in ACM Ensure that a call can be successfully established if the ACM indicates that it this ... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.10 Call Diversion (CFB, CFNR, CFU, CD) | TP410001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses B.6 and B.7, Q.732 [i.4], clause 2.5 TSS reference ISUP-SIP-ISUP/SS/Call Diversion SIP selection criteria ISUP selection criteria Test purpose "Call is diverting" indication received in 180 Ringing Verify that a call can be successfully establis... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.11 CONF | TP411001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.14, Q.734 [i.7], clause 1.6.15 TSS reference ISUP-SIP-ISUP/SS/CONF SIP selection criteria ISUP selection criteria Test purpose Generic notification transfer "conference established" and "other party added" To verify that the IUT can successfull... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.12 ECT | TP412001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 5.4.3, 5.4.3.2 and B.8, Q.732.7 [i.5], clause 7.5.2.1.1.1 a) TSS reference ISUP-SIP-ISUP/SS/ECT SIP selection criteria ISUP selection criteria Test purpose Capability of sending a call transfer number for the active user Verify that the IUT is a... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.13 3PTY | TP413001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.15, Q.734.2 [i.8], clauses 2.4 and 2.2.1 TSS reference ISUP-SIP-ISUP/SS/3PTY SIP selection criteria ISUP selection criteria Test purpose Served user initiates 3PTY Verify that the served user with two active calls is located, can successfully j... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.14 User-to-user service | |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.14.1 User-to-user service 1 | TP414001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clause B.21, Q.737 [i.10], clauses 1.1.5.2.3 and 4 TSS reference ISUP-SIP-ISUP/SS/UUS1 SIP selection criteria PICS 5/23 ISUP selection criteria Test purpose Service 1 implicit request: User-to-user information in the IAM Ensure that the SUT can successf... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.14.2 User-to-user service 2 | TP414101 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 5.4.3 and B.21, Q.737 [i.10], clauses 1.2.5.2.3 and 4 TSS reference ISUP-SIP-ISUP/SS/UUS2 SIP selection criteria PICS 5/23 ISUP selection criteria Test purpose Service 2 request not essential transferred in the INVITE Ensure that the SUT can suc... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.14.3 User-to-user service 3 | TP414201 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 5.4.3 and B.21, Q.737 [i.10], clauses 1.2.5.2.3 and 4 TSS reference ISUP-SIP-ISUP/SS/UUS3 SIP selection criteria PICS 5/23 ISUP selection criteria Test purpose Ensure that the SUT can successfully transfer the User-to-user service 3 explicit req... |
32ad4a8d2d51f55609bc20539b112f1c | 186 002-3 | 5.3.15 Closed User Group (CUG) | TP415001 SIP reference: RFC 3261 [4] ISUP reference: Q.1912.5 [1], clauses 5.4.3 and B.16, Q.735 [i.9], clauses 1.5.2.3 and 1.5.2.4 TSS reference ISUP-SIP-ISUP/SS/CUG SIP selection criteria PICS 5/22 ISUP selection criteria PICS 5/22 Test purpose I-IWU: Successful call setup with CUG 'outgoing access allowed' Ensure th... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 1 Scope | The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control Protocol or ISDN User Part for the Profile A and Profile B described in the ITU-T Recommendation Q.1912.5 [1] and EN 383 001 [2]. A furthe... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 2 References | References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accept... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 2.1 Normative references | The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ITU-T Recommendation Q.1912.5: "Interworking between ... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 2.2 Informative references | The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 3 Definitions and abbreviations | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 3.1 Definitions | For the purposes of the present document, the terms and definitions given in SIP/ISUP interworking reference specification, in ISDN layer 3 reference specification, in ISO/IEC 9646-1 [8], in ISO/IEC 9646-3 [9], in ISO/IEC 9646-7 [10] and the following apply: Abstract Test Case (ATC): complete and independent specificat... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 3.2 Abbreviations | For the purposes of the present document, the following abbreviations apply: ATC Abstract Test Case ATM Abstract Test Method ATP Access Transport Parameter ATS Abstract Test Suite BCI Backward Call Indicators CPS Calling Party's Category DSS1 Digital Subscriber System No. 1 FCI Forward Call Indicators HLC High Layer Co... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 4 Implementation under test and test methods | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 4.1 Identification of the system and implementation under test | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 4.1.1 Profile A | IP IP, ATM or TDM BICC or ISUP Profile scope SIP Proxy G/W Type 1 SIP Figure 1: Profile Scope for SIP Interworking with BICC/ISUP with a Type 1 Gateway |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 4.1.2 Profile B | IP IP, ATM or TDM BICC or ISUP Profile scope SIP BICC CSF-T SIP Proxy G/W Type 2 SN Figure 2: Profile Scope for SIP Interworking with BICC/ISUP with a Type 2 Gateway ETSI ETSI TS 186 002-2 V1.1.5 (2008-05) 10 |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 5 Test Suite Structure (TSS) | The Test Suite Structure is in close alignment with ITU-T Recommendation Q.1912.5 [1] and EN 383 001 [2]. |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 5.1 Interworking from SIP to ISUP (outgoing call) | SIP -ISUP Basic call Sending of the Initial address message (IAM) 101xxx Sending of the Subsequent address message (SAM) 102xxx Sending of COT 103xxx Receipt of the Address complete message (ACM) 104xxx Receipt of the Call progress message (CPG) 105xxx Receipt of the answer message (ANM) 106xxx Receipt of the Connect m... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 5.2 Interworking from ISUP to SIP (incoming call) | ISUP-SIP Basic call Sending of the INVITE message 301xxx Receipt of the Subsequent address message (SAM) 302xxx Sending of the Address complete message (ACM) 303xxx Sending of the Call progress message (CPG) 304xxx Sending of the answer message (ANM) 305xxx Sending of the Connect message (CON) 306xxx Receipt of the Rel... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6 Test purposes (TP) | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.1 Introduction | For each test requirement a Test Purpose (TP) is defined. ETSI ETSI TS 186 002-2 V1.1.5 (2008-05) 12 |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.1.1 Test purpose (TP) naming convention | For each test requirement a Test Purpose (TP) is defined. All test purposes belong to the main group ISUP_SIP_Interworking. Groups are organized according to the test suite structure (TSS). Each test purpose is presented in a separate table. The first row of the table contains the following items: TP Identifier of the ... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.1.2 Source of test purpose definition | The test purposes have been developed based on ITU-T Rec Q.1912.5 [1] and EN 383 001 [2]. |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.1.3 Test purpose structure | The test purpose structure is according to the test suite structure (TSS). |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2 Test purposes for the basic call | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1 Interworking from SIP to ISUP (Outgoing Call) | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.1 Sending of the Initial Address Message (IAM) | TP101001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.1.1 (1, a) TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: NOT PICS 4/4 AND PICS 4/5 ISUP selection criteria: Test purpose: Ensure that if the SUT upon receipt of the first INV... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.2 Sending of the Subsequent Address Message (SAM) | TP102001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.2 a) TSS reference: SIP-ISUP/Basic call/ Sending of the Subsequent Address Message (SAM)/ SIP selection criteria: PICS 3/4 ISUP selection criteria: PICS 3/8 Test purpose: Ensure that the SUT receives an INVITE with the same Call-ID an... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.3 Sending of COT | TP103001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.3 TSS reference: SIP-ISUP/Basic call/COT SIP selection criteria: PICS 4/4 AND PICS 4/5 ISUP selection criteria: PICS 1/4 AND PICS 4/1 Test purpose: Ensure that the when the SUT determines that all the preconditions on the incoming SIP... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.4 Receipt of the Address Complete Message (ACM) | TP104001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.5, 2) TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT on receipt of an ACM message where the Called party status ind... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.5 Receipt of the Call progress message (CPG) | TP105001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.6 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT, having received the ACM message called party status indicator "no in... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.6 Receipt of the Answer message (ANM) | TP106001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT, having received the ACM message Called party status indicator set to "subsc... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.7 Receipt of the Connect message (CON) | TP107001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clauses 6.4 and 6.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the CONNECT message (CON). SIP selection criteria: ISUP selection criteria: Test purpose: SDP offer was received in the initial INVITE. Ensure that the SUT, on receipt of an CO... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.8 Receipt of the REL message | TP108001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.11.2 TSS reference: SIP-ISUP /Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: NOT PICS 4/10 ISUP selection criteria: Test purpose: Ensure that the SUT in the Idle state on receipt of a INVITE message, sending... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.9 Autonomous release at I-IWU | TP108101 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.11.3 TSS reference: SIP-ISUP/Basic call/ Autonomous release at I-IWU SIP selection criteria: ISUP selection criteria: PICS 4/6 Test purpose: Ensure that when a an automatic repeat attempt initiated by the SUT is not successful (becaus... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.10 Receipt of the Release message BYE / CANCEL | TP109001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.11.1 TSS reference: SIP-ISUP/Basic call/ Receipt of the BYE message SIP selection criteria: NOT PICS 4/11 ISUP selection criteria: Test purpose: Ensure that the SUT on receipt of SIP BYE, the SUT shall send an ISUP REL with the cause ... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.12 Receipt of the Suspend message (SUS) network initiated | TP111001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 6.9 TSS reference: SIP-ISUP/Basic call/ receipt of a SUSPEND message with the suspend indicator set to "network initiated" SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT, on receipt of a SUSPEND messa... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.1.13 Receipt of the Resume message (RES) network initiated | TP112001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1] clause 6.10 TSS reference: SIP-ISUP/Basic call/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT, on receipt of a RESUME message containing the suspend/resume indicator set to "network initiated": • does not se... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2 Interworking from ISUP to SIP | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.1 Sending of the INVITE message | TP301001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 7.1, 1 a) TSS reference: ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called pa... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.2 Receipt of the SAM message after INVITE has been send | TP302001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 7.2 TSS reference: ISUP-SIP/Basic call/Receipt of SAM after INVITE has been sent SIP selection criteria: PICS 3/1 ISUP selection criteria: Test purpose: Ensure if the SUT is supporting en bloc addressing towards the SIP network, subsequ... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.3 Sending of the ACM message | TP303001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clauses 7.1, 1) a) and 7.3.1 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 1/1 AND PICS 3/1AND NOT PICS 4/24 ISUP selection criteria: PICS 4/9 Test purpose: Ensure that the SUT in Idle state, on re... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.4 Sending of the CPG message | TP304001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clauses 7.1 and 7.3.1 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 ISUP selection criteria: Test purpose: Ensure that the SUT, having sent a ACM message with called party status "no indicatio... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.5 Sending of the ANM message | TP305001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 7.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT having sent the ACM message, on receipt of a 200 OK INVITE for this call, it... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.6 Sending of the CON message | TP306001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clauses 7.5 and 7.5.1 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 1/1 ISUP selection criteria: Test purpose: Ensure that the SUT, having not sent the ACM message, on receipt of a 200 O... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.7 Receipt of the Release message (REL) | TP307001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 7.7.1, 1) TSS reference: ISUP-SIP/Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT after receiving the IAM but before an INVITE has been sent. On receip... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.8 Sending of a REL message (REL) / receipt of a backward BYE | TP308001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 7.7.2 TSS reference: ISUP-SIP /Basic call/ Sending of the Release message (REL)/ SIP selection criteria: NOT PICS 4/11 ISUP selection criteria: Test purpose: Ensure that the SUT after receiving the IAM sends out an INVITE message and on... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.9 Autonomous release at O-IWU | TP308020 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clause 7.7.3 TSS reference: ISUP-SIP /Basic call/ Sending of the Release message (REL)/ SIP selection criteria: NOT PICS 4/10 ISUP selection criteria: Test purpose: Ensure that the SUT after receiving the IAM the BICC/ISUP procedures results i... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.10.1 Receipt of Reset Circuit message (RSC) | TP309001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clauses 7.7.1, 1), 7.7.4 and 7.7.5 TSS reference: ISUP-SIP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selectio... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.10.2 Receipt of Circuit group reset message (GRS) | TP309007 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clauses 7.7.1, 1), 7.7 and 7.7.5 TSS reference: ISUP-SIP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection ... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.2.2.10.3 Receipt of Circuit group blocking message (CGB) | TP309014 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], clauses 7.7.1, 1) and 7.7.4 TSS reference: ISUP-SIP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection crite... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3 Test purposes for the Supplementary Services | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1 Interworking from SIP to ISUP (Outgoing Call) | |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.1 Calling Line Identification (CLI) | TP501001 SIP reference: RFC 3261 [6] ISUP reference: 6.1.3.6 [2] TSS reference: SIP-ISUP/SS/CLI/ SIP selection criteria: ISUP selection criteria: PICS 6/1 AND PICS 6/9 Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Asserted-Identity containing a URI with an identi... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.2 Call Hold (HOLD) | TP502001 SIP reference: RFC 3261 [6] ISUP reference: EN 383 001 [2], annex B.10 TSS reference: SIP-ISUP/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams. ISUP selection criteria: Support the generic notification procedure for HOLD supplementary service. Test purpo... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.3 Terminal portability (TP) | TP503001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], annex B.13 TSS reference: SIP-ISUP/SS/TP/ SIP selection criteria: PICS 8/3 ISUP selection criteria: PICS 5/6 Test purpose: Ensure that the SUT stop the temporarily sending one or more unicast media streams if a SUS message (ISDN subscriber ini... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.4 Conference calling (CONF) | TP504001 SIP reference: RFC 3261 [6] NGN reference: ES 283 027 [14], clause 7.4.14 TSS reference: SIP-ISUP/SS/CONF/ SIP selection criteria: PICS 8/2 ISUP selection criteria: PICS 5/10 Test purpose: Ensure that the SUT stop the temporarily sending one or more unicast media streams if a CPG message Generic notification i... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.5 Three Party service (3PTY) | TP505001 SIP reference: RFC 3261 [6] NGN reference: ES 283 027 [14], clause 7.4.15 TSS reference: SIP-ISUP/SS/3PTY/ SIP selection criteria: PICS 8/2 ISUP selection criteria: PICS 5/5 AND PICS 5/18 Test purpose: Ensure that the SUT stop the temporarily sending one or more unicast media streams if a CPG message Generic n... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.6 Connected line identification (COL) | TP506001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], annex B.2 TSS reference: SIP-ISUP/SS/COL/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT, if a connected number is received in an ANM, does not disrupt the SIP signalling procedure. The connected number is n... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.7 Malicious call identification MCID | TP507001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], annex B.4 TSS reference: SIP-ISUP/SS/MCID/ SIP selection criteria: PICS 9/1 ISUP selection criteria: Test purpose: Ensure that the SUT if an IDR is received returns an IRS message. The MCID response indicator is set to "MCID not included". The... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.8 Sub-addressing (SUB) | TP508001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], annex B.5 TSS reference: SIP-ISUP/SS/SUB/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT if a Sub address is received in an ATP parameter, the SIP signalling procedure is not disrupted. SIP Parameter values:... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.9 Call diversion (CDIV) | TP509001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], annex B.6 TSS reference: SIP-ISUP/SS/CDIV/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT if an ACM is received with and call diversion may occur indicator in the optional backward call indicator is set to "... |
09d0f941c2db9816d77f8c2b8c4b53e5 | 186 002-2 | 6.3.1.10 Call waiting (CW) | TP510001 SIP reference: RFC 3261 [6] ISUP reference: ITU-T Rec Q.1912.5 [1], annex B.9 TSS reference: SIP-ISUP/SS/CW/ SIP selection criteria: ISUP selection criteria: Test purpose: Ensure that the SUT if an ACM with Generic notification parameter = "Call is a waiting call", the SIP signalling procedure is not disrupted... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.