hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.3 Busy condition at the peer, with ACK sent for resumption of transmission | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.3.1 Conformance requirement | The receive not ready (RNR) command shall be used by an LLE to indicate a busy condition. The value of N(R) in the RNR frame acknowledges I frames numbered up to and including N(R) - 1 . Subsequent frames, if any, shall not be considered confirmed.
After receiving a valid RNR frame, the LLE shall:
- set a peer receiver... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.3.2 Test purpose | To verify that the MS:
- Handles busy condition when an RNR is sent from the SS;
- Resumes transmission upon reception of an ACK. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.3.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
The MS is made to send I+S frames continuously on SAPI 9. The SS acknowledges the received I+S frames with supervisory RR frames.
After receiving the last transmitted frame, the SS responds with a supervisory RNR frame. The RNR frame wi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.4 SACK frame | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.4.1 Conformance requirement | On receipt of a valid SACK frame, the LLE shall consider all I frames with the corresponding bit set to 1 in the SACK bitmap as acknowledged.
Reference
3GPP TS 04.64, subclause 8.6.3.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.4.2 Test purpose | To verify that the MS considers only the frames as indicated by the SACK bitmap have been received correctly and that it retransmits the frames that have not been acknowledged. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.2.4.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
NMS >= 1.
Initiate data transfer from the MS and send frames from N(S) = 0 to N(S) = NMS , where NMS= kU ‑ 1.
If NMS is even, do not acknowledge an arbitrarily chosen sequence of NMS/2 frames and acknowledge the other frames by using SA... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3 Reception of I + S frames at the MS | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.1 Checking N(R) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.1.1 Conformance requirement | Whenever an LLE receives a frame with the A bit set to 1, it shall transmit an I+S or S frame.
In ABM mode, all I frames and Supervisory frames contain N(R), the expected send sequence number of the next in-sequence received I frame. At the time that a frame of the above type is designated for transmission, the value o... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.1.2 Test purpose | To verify that the MS transmits acknowledgements with the correct N(R). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Send I+S frames continuously from the SS. Send more than 512 frames. The delay between two I+S frames should be less than T201.
Do not send any data from the MS.
When the MS sends RR frames, check the value of N(R) to verify that it ind... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.2 MS handling busy condition during bi-directional data transfer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.2.1 Conformance requirement | The receive not ready (RNR) command shall be used by an LLE to indicate a busy condition. The value of N(R) in the RNR frame acknowledges I frames numbered up to and including N(R) - 1. Subsequent frames, if any, shall not be considered confirmed.
After receiving a valid RNR frame, the LLE shall:
- set a peer receiver ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.2.2 Test purpose | To verify that the MS handles peer receiver busy condition when it is transmitting to the SS and receiving data from the SS. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Send 1 I+S frame (<=N201-I octets) from the MS.
Send 1 I+S frame from the SS, containing 1 octet of data.
Send an RNR from the SS to indicate receiver busy condition, after 1 frame (N(S) = 0) has been received at the SS. The N(R) value ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.3 SACK frame | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.3.1 Conformance requirement | The SACK supervisory frame shall be used by an LLE to acknowledge single or multiple frames. Frames up to and including N(R) – 1, and frames indicated by the SACK bitmap, have been received correctly.
If the LLE is in the own receiver busy condition, the appropriate supervisory frame is the RNR frame. Otherwise, if the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.3.2 Test purpose | To verify whether the MS sends a SACK frame when it is required and that the SACK frame has the correct bits set. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.3.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
NMS = 20, for this test case.
Initiate data transfer from the SS and send frames from N(S) = 0 to N(S) = NMS - 3. The A bit shall be set to 1 for all frames sent. Wait till all the frames are acknowledged. Send the frame with N(S) = NMS... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.4 ACK frame | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.4.1 Conformance requirement | Whenever an LLE receives a frame with the A bit set to 1, it shall transmit an I+S or S frame.
The ACK supervisory frame shall be used by an LLE to acknowledge a single or multiple I frames. Frames up to and including N(R) – 1, and frame N(R) + 1, have been received correctly.
Reference
3GPP TS 04.64, subclauses 6.4.3.... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.4.2 Test purpose | To verify that the MS transmits an ACK frame when frames up to and including N(R) – 1 and frame N(R) + 1 have been received correctly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.3.4.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
For this test case, NSS= 20.
Send I+S frames with N(S) = 0 to N(S) = NSS -2 from the SS. The delay between two I+S frames should be less than T201. Set the A bit to 1 in frames 0 to NSS – 2. Verify that the MS sends an RR frame as ackno... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4 Link Reestablishment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.1 Reestablishment due to reception of SABM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.1.1 Conformance requirement | The criteria for re-establishing the ABM mode of operation are defined in this clause by the following conditions:
- the receipt, while in the ABM state, of a SABM;
- the receipt of an LL-ESTABLISH-REQ primitive from layer 3;
- the occurrence of N200 retransmission failures;
- the occurrence of a frame rejection condit... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.1.2 Test purpose | To verify whether the MS initiates reestablishment of the link if it receives a SABM while in ABM state. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the MS . After receiving 1frame from the MS, send a SABM from the SS and verify whether the MS responds with a UA. After the link is re-established, verify that the MS resumes data ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.2 Reestablishment due to N200 failures | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.2.1 Conformance requirement | The criteria for re-establishing the ABM mode of operation are defined in this clause by the following conditions:
- the receipt, while in the ABM state, of a SABM;
- the receipt of an LL-ESTABLISH-REQ primitive from layer 3;
- the occurrence of N200 retransmission failures;
- the occurrence of a frame rejection condit... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.2.2 Test purpose | To verify whether the MS initiates reestablishment of the link when there is an N200 retransmission failure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the MS, to send 1 LLC frame (<=N201-I octets). Do not acknowledge the data frame sent from the SS. The MS shall retransmit the frame N200 times. Wait for (N200 * T201) seconds and s... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.3 Reestablishment due to reception of DM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.3.1 Conformance requirement | The criteria for re-establishing the ABM mode of operation are defined in this clause by the following conditions:
- the receipt, while in the ABM state, of a SABM;
- the receipt of an LL-ESTABLISH-REQ primitive from layer 3;
- the occurrence of N200 retransmission failures;
- the occurrence of a frame rejection condit... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.3.2 Test purpose | To verify whether the MS initiates reestablishment of the link if it receives a DM while in ABM state. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.2.4.3.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the MS . After receiving 3 frames from the MS, send a DM with F=0 from the SS and verify whether the MS responds with a SABM. After the link is re-established, verify that the MS re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3 Collision of commands and responses | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.1 Collision of SABM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.1.1 Conformance requirement | If the transmitted and received unnumbered commands are SABM commands and a Layer-3 Parameters XID parameter is present in both or in neither, then the SABM command transmitted by the SGSN shall be ignored and treated as not transmitted. The LLE in the SGSN shall send the UA response at the earliest possible opportunit... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.1.2 Test purpose | To verify that the MS ignores a SABM command received from the SS when it (the MS) is waiting for a UA response, when a Layer-3 Parameters XID parameter is present in both. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate link establishment from the MS by sending a SABM with Layer-3 Parameters XID parameter present. Upon reception of the SABM at the SS, send a SABM with Layer-3 Parameters XID parameter present. Verify that the MS ignores the SAB... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.2 Collision of SABM and DISC | 46.1.2.3.2.1 Conformance requirement
If the transmitted and received unnumbered commands are a SABM and DISC command, the LLEs shall issue a DM response at the earliest possible opportunity. Upon receipt of a DM response with the F bit set to 1, the LLE shall enter the ADM state and notify layer3 by means of the appro... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.2.2 Test purpose | To verify that when the MS receives a DISC after sending a SABM, it shall send a DM response to the SS. Upon reception of a DM response, it shall enter the ADM state. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate link establishment from the MS by sending a SABM command. Send a DISC command in response to this from the SS. Verify that the MS sends a DM and upon reception of a DM from the SS, it enters the ADM state. The MS might try to r... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.3 Collision of SABM and XID commands | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.3.1 Conformance requirement | If the transmitted unnumbered command is a SABM command and the received unnumbered command is an XID command, then the LLE shall ignore the received XID command.
Reference
3GPP TS 04.64 subclause 8.5.5.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.3.3.2 Test purpose | To verify that the MS ignores the XID command if it collides with a SABM command.
46.1.2.3.3.3 Method of test
Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
When the MS initiates link establishment using a SABM, send an XID command. Verify that the XID command is ignored.
Maximum d... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.4 Unsolicited response frames | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.4.1 Unsolicited DM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.4.1.1 Conformance requirement | When a DM response with the F bit set to 0 is received by an LLE, a collision between a transmitted SABM or DISC command and the unsolicited DM response may have occurred.
A DM response with the F bit set to 0 colliding with a SABM or DISC shall be ignored.
An LLE shall ignore a DM response received with F=0 when it is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5 FRMR frames | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1 Sending FRMR due to undefined command control field | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1.2 Test purpose | To verify that if the MS receives a frame with a command control field that is not implemented, it sends an FRMR frame and re-establishes the link. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the MS. After receiving the first frame, send a supervisory frame from the SS to acknowledge the last I+S frame received. In this set the first byte of the S frame control field to ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2 Sending FRMR due to reception of an S frame with incorrect length | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2.2 Test purpose | To verify that if the MS receives an S frame with incorrect length, it sends an FRMR frame and re-establishes the link. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the MS. Send an RR with incorrect length, from the SS, when an I+S frame from the MS with the A bit set is received. Verify whether the MS sends an FRMR. After the link is re-establ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.3 Sending FRMR due to reception of an I frame information field exceeding the maximum length | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.3.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.3.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
After establishing a link, initiate data transfer from the SS. After sending 5 frames from the SS, send an I+S frame with length greater than N201-I, from the SS. Verify whether the MS sends an FRMR. After the link is re-established, se... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.4 Frame reject condition during establishment of ABM | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.4.1 Conformance requirement | The FRMR unnumbered response may be received by an LLE as a report of a frame rejection condition not recoverable by retransmission of the identical frame:
- receipt of a command or response control field that is undefined or not implemented;
- receipt of a supervisory or unnumbered frame with incorrect length; or
- re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.5.4.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate link establishment from the MS by sending a SABM. Send an invalid U frame as response. Check if the MS resends the SABM. Respond with a UA. Initiate data transfer from the MS and acknowledge all the frames sent from the MS.
Max... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6 Multiple Connections | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.1 Simultaneous acknowledged and unacknowledged data transfer on the same SAPI | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.1.1 Conformance requirement | The purpose of LLC is to convey information between layer-3 entities in the MS and SGSN. Specifically, LLC shall support:
- multiple MSs, at the Um interface;
- multiple layer-3 entities within the MS.
Reference
3GPP TS 04.64, subclause 4.2.
46.1.2.6.1.2 Test purpose
To verify that LLC supports simultaneous acknowledg... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate acknowledged data transfer from the MS on SAPI 3. Send 300 frames continuously. The value of N(S) shall begin from 0 and increment by 1 mod (512) for each frame. Initiate unacknowledged data transfer from the MS on the same SAP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2 Simultaneous acknowledged and unacknowledged data transfer on different SAPIs | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2.1 Conformance requirement | The purpose of LLC is to convey information between layer-3 entities in the MS and SGSN. Specifically, LLC shall support:
- multiple MSs, at the Um interface;
- multiple layer-3 entities within the MS.
Reference
3GPP TS 04.64, subclause 4.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2.2 Test purpose | To verify that LLC supports simultaneous acknowledged and unacknowledged data transfer on different SAPIs in different directions. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.6.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate unacknowledged data transfer from the MS on SAPI 5. Initiate acknowledged data transfer from the SS on SAPI 3 after the first i frames have been received from the MS. Send 300 I+S frames continuously from the SS. The value of N... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7 XID Negotiation | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1 Negotiation initiated by the SS during ABM, for T200 and N200 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1.2 Test purpose | To verify that when the SS initiates XID negotiations with a certain value of T200 and N200, the MS complies with the final negotiated values |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.1.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate XID negotiation from the SS, with N200 = 4 and T200 = 10 s. The MS will send an XID response. Initiate data transfer from the MS. Verify that the MS complies with the values of T200 and N200 that were agreed upon.
Maximum durat... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2 Negotiation initiated by the SS during ADM, for N201-I | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2.2 Test purpose | To verify that when the SS initiates XID negotiations with a certain value of N201-I during ADM, the MS complies with the final negotiated values. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.2.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate PDP context activation from the MS and in the UA response from the SS send a value of 140 for N201-I. If the MS responds with an XID command, in the XID response, give N201-I = 140.
Initiate data transfer from the SS. Send an I... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3 Negotiation initiated by the SS (using XID, for IOV-UI) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3.2 Test purpose | To verify that when the SS sends IOV-UI to the MS in a XID, the MS shall cipher its output using this value of IOV-UI. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.3.3 Method of test | Initial conditions
For parameter K = 4 (GEA4) Test USIM has to be plugged into the MS. The MS shall be GPRS attached with ciphering enabled. Encryption GEA3 or GEA4 is used depending on the parameter K.
Specific PICS statements:
- Supported encryption Algorithm: GEA3 (TSPC_Feat_GEA3)
- Supported encryption Algorithm: G... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4 Negotiation initiated by the SS (during ADM, for N201-U) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4.2 Test purpose | To verify that when the SS initiates XID negotiations with a certain value of N201-U during ADM, the MS complies with the final negotiated values. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.4.3 Method of test | Initial conditions
-
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
Initiate XID negotiation from the SS, with N201-U = 140. The MS shall send an XID response. The value of N201-U shall either be not present in the XID response or set to 140.
Initiate data transfer from the MS. Verify that the length of... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5 Negotiation initiated by the SS (during ADM, for IOV-UI) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5.2 Test purpose | To verify that when the SS sends IOV-UI to the MS in an XID command:
- The MS shall cipher its output using this value of IOV-UI.
- This value of IOV-UI shall be applicable for all SAPIs using this TLLI.
- Identity Response sent from the MS shall not be ciphered. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.5.3 Method of test | Initial conditions
- For parameter K = 4 (GEA4) Test USIM has to be plugged into the MS.
Specific PICS statements:
- Supported encryption Algorithm : GEA3 (TSPC_Feat_GEA3)
- Supported encryption Algorithm : GEA4 (TSPC_Feat_GEA4)
PIXIT statements:
-
Test procedure
Send a value of IOV-UI from the SS, different from the d... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6 Negotiation initiated by the SS (during ABM, for Reset) | Send Reset during unacknowledged mode data transfer and check if N(S) begins from 0. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6.1 Conformance requirement | The negotiation procedure is one-step, i.e., one side shall start the process by sending an XID command, offering a certain set of parameters from the applicable parameter repertoire the sending entity wants to negotiate, proposing values within the allowed range. In return, the other side shall send an XID response, e... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6.2 Test purpose | To verify that when the SS sends the Reset parameter to the MS in an XID:
- it sets all LLC layer parameters to the default values;
- change any LLEs in ABM state to ADM state;
- set the unconfirmed state variable V(U) to value 0;
- set the unconfirmed receive state variable V(UR) to 0;
- set the OCs for unacknowledged... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 46.1.2.7.6.3 Method of test | Initial conditions
System simulator
The System Simulator shall support two cells, each in a different SGSN Routing Area.
Mobile station:
The MS shall be GPRS attached with ciphering enabled.
Specific PICS statements:
-
PIXIT statements:
-
Test procedure
For this test case, NMS = NSS = 10.
Initiate unacknowledged data t... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.