qid int64 1 74.7M | question stringlengths 12 33.8k | date stringlengths 10 10 | metadata list | response_j stringlengths 0 115k | response_k stringlengths 2 98.3k |
|---|---|---|---|---|---|
138,924 | Anyone around coy with being Mr. Fixit? (Ms. Fixit would be even better, but either will do nicely.) I can't absorb dragon souls, and yes, I've been through almost every thread there is here on the answer. (So please, do not duplicate me. Pretty please?)
Mind you, I got a *TRUCKLOAD* of mods installed... *(ducks in pr... | 2013/11/06 | [
"https://gaming.stackexchange.com/questions/138924",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/59017/"
] | If that is your load order I see one problem: You have the skyrim patch after the DLC patches - it needs to go first.
The correct order is given at: <http://skyrim.nexusmods.com/mods/19/>
>
> * Skyrim.esm
> * Update.esm
> * Unofficial Skyrim Patch.esp
> * Dawnguard.esm
> * Unofficial Dawnguard Patch.esp
> * Hearthfi... | I had the same issue. However when I disabled all the unofficial patches I was still having this problem. I ended up taking the script extender off and it worked. Then slowly started uploading my mods back on that didn't need the script extender. I wanna put it back on there so I can have my immersion mods back that ma... |
138,924 | Anyone around coy with being Mr. Fixit? (Ms. Fixit would be even better, but either will do nicely.) I can't absorb dragon souls, and yes, I've been through almost every thread there is here on the answer. (So please, do not duplicate me. Pretty please?)
Mind you, I got a *TRUCKLOAD* of mods installed... *(ducks in pr... | 2013/11/06 | [
"https://gaming.stackexchange.com/questions/138924",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/59017/"
] | If that is your load order I see one problem: You have the skyrim patch after the DLC patches - it needs to go first.
The correct order is given at: <http://skyrim.nexusmods.com/mods/19/>
>
> * Skyrim.esm
> * Update.esm
> * Unofficial Skyrim Patch.esp
> * Dawnguard.esm
> * Unofficial Dawnguard Patch.esp
> * Hearthfi... | I also used Nexus 31685, but I had to extract the mqkilldragonscript.pex from UDBP (Nexus 31083) which I added to the scripts folder for Nexus 31685. My SMPC (Nexus 23833) was overwriting the updated mqkilldragonscript.pex and keeping the dragon soul from absorbing properly. I used BSA Unpacker (Nexus 4804) to get the ... |
138,924 | Anyone around coy with being Mr. Fixit? (Ms. Fixit would be even better, but either will do nicely.) I can't absorb dragon souls, and yes, I've been through almost every thread there is here on the answer. (So please, do not duplicate me. Pretty please?)
Mind you, I got a *TRUCKLOAD* of mods installed... *(ducks in pr... | 2013/11/06 | [
"https://gaming.stackexchange.com/questions/138924",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/59017/"
] | USKP has a problem with the dragonactorscript.pex file.
Found and installed a fix available here: <http://www.nexusmods.com/skyrim/mods/31685>
Personally, I went and overwrote the file from USKP itself instead of treating this fix as a separate mod, keeping a backup available just in case. | I had the same issue. However when I disabled all the unofficial patches I was still having this problem. I ended up taking the script extender off and it worked. Then slowly started uploading my mods back on that didn't need the script extender. I wanna put it back on there so I can have my immersion mods back that ma... |
138,924 | Anyone around coy with being Mr. Fixit? (Ms. Fixit would be even better, but either will do nicely.) I can't absorb dragon souls, and yes, I've been through almost every thread there is here on the answer. (So please, do not duplicate me. Pretty please?)
Mind you, I got a *TRUCKLOAD* of mods installed... *(ducks in pr... | 2013/11/06 | [
"https://gaming.stackexchange.com/questions/138924",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/59017/"
] | USKP has a problem with the dragonactorscript.pex file.
Found and installed a fix available here: <http://www.nexusmods.com/skyrim/mods/31685>
Personally, I went and overwrote the file from USKP itself instead of treating this fix as a separate mod, keeping a backup available just in case. | I also used Nexus 31685, but I had to extract the mqkilldragonscript.pex from UDBP (Nexus 31083) which I added to the scripts folder for Nexus 31685. My SMPC (Nexus 23833) was overwriting the updated mqkilldragonscript.pex and keeping the dragon soul from absorbing properly. I used BSA Unpacker (Nexus 4804) to get the ... |
7,998 | I'm replacing the floor in my bathroom, which was previously a vinyl sheet. Prior to that (and I think original to the house, built in early 70's) it was some peel and stick-type tiles, except they're very hard (they remind of me what would be sold as commercial tiles now). There were some tiles left under the old vani... | 2011/08/01 | [
"https://diy.stackexchange.com/questions/7998",
"https://diy.stackexchange.com",
"https://diy.stackexchange.com/users/157/"
] | I have made the mistake twice of demoing an old bathroom sink and throwing out the p-trap before the new sink and plumbing went in. Both times I regretted it because when I went to put in the new p-trap, I found some sort of strange/different plumbing setup which required several trips to the hardware store (and me rep... | Best way I've thought of so far is to use a drain tube extension coming out of the connector in the wall, then go into another female trap connector, then P-trap, and then finally female drain connector for the actual sink drain. Biggest downside is the pipe will get narrower between the wall and the p-trap, since it's... |
7,998 | I'm replacing the floor in my bathroom, which was previously a vinyl sheet. Prior to that (and I think original to the house, built in early 70's) it was some peel and stick-type tiles, except they're very hard (they remind of me what would be sold as commercial tiles now). There were some tiles left under the old vani... | 2011/08/01 | [
"https://diy.stackexchange.com/questions/7998",
"https://diy.stackexchange.com",
"https://diy.stackexchange.com/users/157/"
] | A 1 1/4" female FIP adapter worked perfectly. As soon as I saw it, I was embarassed for not having thought of it earlier.
I used some teflon tape, screwed the FIP adapter onto the adapter coming out of the wall, then just glued my 1 1/4" pipe direc... | I have made the mistake twice of demoing an old bathroom sink and throwing out the p-trap before the new sink and plumbing went in. Both times I regretted it because when I went to put in the new p-trap, I found some sort of strange/different plumbing setup which required several trips to the hardware store (and me rep... |
7,998 | I'm replacing the floor in my bathroom, which was previously a vinyl sheet. Prior to that (and I think original to the house, built in early 70's) it was some peel and stick-type tiles, except they're very hard (they remind of me what would be sold as commercial tiles now). There were some tiles left under the old vani... | 2011/08/01 | [
"https://diy.stackexchange.com/questions/7998",
"https://diy.stackexchange.com",
"https://diy.stackexchange.com/users/157/"
] | A 1 1/4" female FIP adapter worked perfectly. As soon as I saw it, I was embarassed for not having thought of it earlier.
I used some teflon tape, screwed the FIP adapter onto the adapter coming out of the wall, then just glued my 1 1/4" pipe direc... | Best way I've thought of so far is to use a drain tube extension coming out of the connector in the wall, then go into another female trap connector, then P-trap, and then finally female drain connector for the actual sink drain. Biggest downside is the pipe will get narrower between the wall and the p-trap, since it's... |
9,675 | I am starting some tests for building a game on the Android program.
So far everything is working and seems nice.
However I do not understand how to make sure my game looks correct on all phones as they all will have slightly different screen ratios (and even very different on some odd phones)
What I am doing right n... | 2011/03/12 | [
"https://gamedev.stackexchange.com/questions/9675",
"https://gamedev.stackexchange.com",
"https://gamedev.stackexchange.com/users/6053/"
] | From a high-level perspective there's only a handful of options, depending on which is more important, maintaining a consistent aspect ratio, or ensuring that no one to see more than someone else just because they have a wider or taller screen.
Your options are:
1. Cropping the parts that don't fit.
2. Stretching the... | The 3 options from Davy8's answer are:
* Cropping the parts that don't fit.
* Stretching the screen to fit, which has the issue you're seeing of
stretched images.
* "Letterboxing" which maintains both aspect ratio and ensures that no
player sees more than any other player because of their screen size
I would add a fo... |
63,419,309 | MISRA c++:2008 was published in 2008. It was written for C++03.
Does this refer to just the syntax of C++2003 standard or do have to use the compiler as well.
We have written our code base in VS2017 and we only have available for the Language Standard:
* ISO C++14 Standard
* ISO C++17 Standard
* ISO C++ Latest Dra... | 2020/08/14 | [
"https://Stackoverflow.com/questions/63419309",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/767829/"
] | It will be very hard to argue and say that you are MISRA-C++ compliant when not even compiling in C++03 mode. MISRA-C++ is a safe subset of C++03, so it bans a lot of things from that standard. If you run off and compile for C++11 or later, all bets are off.
Visual Studio is not suitable for the kind of mission-critic... | From what I can see on their website, the MISRA standard is not public, so there's really no way for the average person to answer this question. It's probably mostly an issue of what, if any, of the Standard C++ Library you can use and meet the MIRSA requirements.
>
> I suspect given the vast majority of the Standard... |
26,137,413 | I have an old website, and I would like to add a glyphicons to a page of this site.
I cannot install bootstrap (link bootstrap.js and bootstrap.css to this page) because it will change all styled elements on the page.
Is there a way to add only "glyphicons functionality"? | 2014/10/01 | [
"https://Stackoverflow.com/questions/26137413",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1049569/"
] | You can build your bootstrap to components, which you need, on
<http://getbootstrap.com/customize/>
For example for **only glyphicon**, you can check only glyphicon checkbox and download.
Direct url for this setting is
**<http://getbootstrap.com/customize/?id=428c81f3f639eb0564a5>**
Scroll down and download it.
Yo... | You can download glyphicons png on <http://glyphicons.com/> |
26,137,413 | I have an old website, and I would like to add a glyphicons to a page of this site.
I cannot install bootstrap (link bootstrap.js and bootstrap.css to this page) because it will change all styled elements on the page.
Is there a way to add only "glyphicons functionality"? | 2014/10/01 | [
"https://Stackoverflow.com/questions/26137413",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1049569/"
] | I prefer to use something called 'font-awsome' it has a huge library of icons and it only takes one line of code to include it into any project. - It works the same way as glyphicon being able to format with CSS etc.
I know this is not a answer to your question, but its a valid work around, and I prefer the font-aweso... | You can download glyphicons png on <http://glyphicons.com/> |
26,137,413 | I have an old website, and I would like to add a glyphicons to a page of this site.
I cannot install bootstrap (link bootstrap.js and bootstrap.css to this page) because it will change all styled elements on the page.
Is there a way to add only "glyphicons functionality"? | 2014/10/01 | [
"https://Stackoverflow.com/questions/26137413",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1049569/"
] | You can build your bootstrap to components, which you need, on
<http://getbootstrap.com/customize/>
For example for **only glyphicon**, you can check only glyphicon checkbox and download.
Direct url for this setting is
**<http://getbootstrap.com/customize/?id=428c81f3f639eb0564a5>**
Scroll down and download it.
Yo... | I prefer to use something called 'font-awsome' it has a huge library of icons and it only takes one line of code to include it into any project. - It works the same way as glyphicon being able to format with CSS etc.
I know this is not a answer to your question, but its a valid work around, and I prefer the font-aweso... |
41,099 | I have a tentative understanding of modal logic. Can anyone explain modal logic as it is used in computer science? | 2015/04/07 | [
"https://cs.stackexchange.com/questions/41099",
"https://cs.stackexchange.com",
"https://cs.stackexchange.com/users/30383/"
] | I think you can find many good examples if you search a bit online. Some very-easy-to-find examples are in the following list:
From [Stanford Encyclopedia](http://plato.stanford.edu/entries/logic-modal/)
>
> In computer science, labeled transition systems (LTSs) are commonly used to represent possible computation pa... | Modal logic is useful for verification of [reactive systems](http://en.wikipedia.org/wiki/Reactive_system)
>
> A reactive system is a system that responds (reacts) to external events.
> Typically, biological systems are reactive, because they react to certain events. However, the term is used primarily for describing... |
7,811,268 | I have recently started going through sound card drivers in Linux[ALSA].
Can a link or reference be suggested where I can get good basics of Audio like :
Sampling rate,bit size etc.
I want to know exactly how samples are stored in Audio files on a computer and reverse of this which is how samples(numbers) are played... | 2011/10/18 | [
"https://Stackoverflow.com/questions/7811268",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/993969/"
] | The [Audacity](http://audacity.sourceforge.net/) [tutorial](http://audacity.sourceforge.net/manual-1.2/tutorial_basics_1.html) is a good place to start. Another [introduction](http://www.pgmusic.com/tutorial_digitalaudio.htm) that covers similar ground. The [PureData](http://puredata.info/) [tutorial at flossmanuals](h... | I was in the same situation, and certainly this kind of information is out there but you need to do some research first. This is what I have found:
Digital Audio processing is a branch of DSP (Digital Signal
Processing).
>
> DSP is one of the most powerful technologies that will
> shape science and engineering in the... |
17,228 | I'm working with the following op-amps:
LM308AN
LM358P
UA741CP
I want to make a small box that will control the power to any string of christmas lights based off of music that is playing. I would like it to pulse with the base. I want the input to be the signal from the headphone jack of my computer and I want the ou... | 2011/07/22 | [
"https://electronics.stackexchange.com/questions/17228",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/5100/"
] | Sometimes, simply stating what you're trying to accomplish is better than asking the question you *think* you want to ask. This could very well be the case here. So, indulge me as I try to restate your situation and provide some sort of answer.
You have a headphone jack with some music on it, and you want that music t... | **\* See important addition at end \***
You have not provided enough information to allow a good answer. Provide more information and I'll upgrade this answer progressively.
You don't explain what you are trying to do. Do you you want the relay to operate on sound peaks, or when sound is present at all, or to latch ... |
3,151,938 | I want to create a site using a cms, but I want to use my own look and feel. I want to be able to upload downloadable content such as mp3 files with a flash player. I also want users to sign up and login. I want to be able to track and log downloads and uploads done by users. Any suggestions? | 2010/06/30 | [
"https://Stackoverflow.com/questions/3151938",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/220007/"
] | There are dozens of different CMS systems and each works slightly different and is geared for a specific use case. Some of the most popular PHP CMS systems are:
[Drupal](http://drupal.org) - One of my favorites. Very powerful and extensible but a large learning curve and for most projects it can be overkill.
[Joomla]... | Sounds like [Drupal](http://drupal.org/) could satisfy your requirements.
* It would allow you to create a template for your own look and feel
* You can use the CCK and Views modules to create your own content types that support your downloadable files.
* Drupal has a robust built-in user account system.
* There are a... |
3,151,938 | I want to create a site using a cms, but I want to use my own look and feel. I want to be able to upload downloadable content such as mp3 files with a flash player. I also want users to sign up and login. I want to be able to track and log downloads and uploads done by users. Any suggestions? | 2010/06/30 | [
"https://Stackoverflow.com/questions/3151938",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/220007/"
] | There are dozens of different CMS systems and each works slightly different and is geared for a specific use case. Some of the most popular PHP CMS systems are:
[Drupal](http://drupal.org) - One of my favorites. Very powerful and extensible but a large learning curve and for most projects it can be overkill.
[Joomla]... | The two major ones that I can pick out off the top of my head are Drupal and Joomla, so I'd check both of those out. For a good comparison, read [this](http://www.topnotchthemes.com/blog/090224/drupal-vs-joomla-frank-comparison-ibm-consultant) article. |
3,151,938 | I want to create a site using a cms, but I want to use my own look and feel. I want to be able to upload downloadable content such as mp3 files with a flash player. I also want users to sign up and login. I want to be able to track and log downloads and uploads done by users. Any suggestions? | 2010/06/30 | [
"https://Stackoverflow.com/questions/3151938",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/220007/"
] | There are dozens of different CMS systems and each works slightly different and is geared for a specific use case. Some of the most popular PHP CMS systems are:
[Drupal](http://drupal.org) - One of my favorites. Very powerful and extensible but a large learning curve and for most projects it can be overkill.
[Joomla]... | I prefer [Typo3](http://typo3.org/).
Very powerful and great extension repository. For you requirements you dont even need any extension. But it will take a lot of time to get in. |
5,476,647 | I'm running into a problem submitting my application through the Application Loader. I'm receiving the message "This bundle is invalid. Apple is not currently accepting applications built with this version of the SDK."
I've installed Xcode 4.0.1 w/SDK 4.3 ("4A1006", March 24), and I've reinstalled both MonoDevelop an... | 2011/03/29 | [
"https://Stackoverflow.com/questions/5476647",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/29152/"
] | Apple changed the keys required in the application manifest in iOS SDK 4.3.1. We've released a new MonoDevelop build to track this. | Xcode 4.0.1 was released last week with the iOS 4.3.1 SDK, you need to install that. |
5,476,647 | I'm running into a problem submitting my application through the Application Loader. I'm receiving the message "This bundle is invalid. Apple is not currently accepting applications built with this version of the SDK."
I've installed Xcode 4.0.1 w/SDK 4.3 ("4A1006", March 24), and I've reinstalled both MonoDevelop an... | 2011/03/29 | [
"https://Stackoverflow.com/questions/5476647",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/29152/"
] | Apple changed the keys required in the application manifest in iOS SDK 4.3.1. We've released a new MonoDevelop build to track this. | One thought: Double-check that you're building/signing for release, and not e.g. for ad-hoc distribution. |
5,476,647 | I'm running into a problem submitting my application through the Application Loader. I'm receiving the message "This bundle is invalid. Apple is not currently accepting applications built with this version of the SDK."
I've installed Xcode 4.0.1 w/SDK 4.3 ("4A1006", March 24), and I've reinstalled both MonoDevelop an... | 2011/03/29 | [
"https://Stackoverflow.com/questions/5476647",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/29152/"
] | Apple changed the keys required in the application manifest in iOS SDK 4.3.1. We've released a new MonoDevelop build to track this. | i had this problem for one week and i just solve it today , it seems that SDK 4.3 has a problem with the monotouch anyway
the one works with me i uninstall the SDK and install SDK 4.2 with Xcode 3.2.5 and Remove monorouch 3.2.6 and install 3.2.3 . and it will work. |
107,653 | In legal texts, at least in Sweden and Germany, it is common to print some parts of the body text in a smaller font. Is there a name for this typographic convention?
Examples:
[](https://i.stack.imgur.com/sLyzz.jpg)
[![Schmitt 2... | 2018/04/05 | [
"https://graphicdesign.stackexchange.com/questions/107653",
"https://graphicdesign.stackexchange.com",
"https://graphicdesign.stackexchange.com/users/12723/"
] | I believe it is called an "Inline Citation" or "In-Text Citation"
<https://owl.english.purdue.edu/owl/resource/560/02/>
Here: <http://www.easybib.com/guides/citation-guides/chicago-turabian/notes/> I believe they could be referring to the "same thing" but lacking an actual citation (as in your example) simply as a "n... | In Polish text Norm such things are called "Additions", "interjected terms" by publishers and "bracket definition" by lawyers. Or "Parenthesis" by linguistics.
The short definition of such text is
>
> two-side isolated intra-wording sequence
>
>
>
And in proofreading marks they are symbolised by **[p]** and **... |
45,724 | I just made the switch from Windows to Mac, and one thing that's been bothering me is that on a Mac, I can't see multiple Word documents that I have open. On Windows, they all appear in the taskbar (after checking the option to not collapse instances of the same program) and I can quickly switch between them, which is ... | 2012/03/24 | [
"https://apple.stackexchange.com/questions/45724",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/20621/"
] | App Exposé
==========
Trigger using swipe gesture:
* **System Preferences → Trackpad → More Gestures → App Exposé**
Trigger using keys or mouse:
* **System Preferences → Mission Control**
Dock Icon:
* You can trigger App Exposé by right-clickin... | You can use `⌘` + `~` to toggle between multiple windows of the same app.
This is an OS X-wide keyboard shortcut, so it works in Word for Mac 2011, too. |
45,724 | I just made the switch from Windows to Mac, and one thing that's been bothering me is that on a Mac, I can't see multiple Word documents that I have open. On Windows, they all appear in the taskbar (after checking the option to not collapse instances of the same program) and I can quickly switch between them, which is ... | 2012/03/24 | [
"https://apple.stackexchange.com/questions/45724",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/20621/"
] | App Exposé
==========
Trigger using swipe gesture:
* **System Preferences → Trackpad → More Gestures → App Exposé**
Trigger using keys or mouse:
* **System Preferences → Mission Control**
Dock Icon:
* You can trigger App Exposé by right-clickin... | In system preferences you can turn on the gesture for Application Exposè which is essentially Mission Control but only for either the current application or the one your cursor was hovering over in the dock at the time.
This should make it easier to see what it what, but overall it's simply not realistic to force Wind... |
45,724 | I just made the switch from Windows to Mac, and one thing that's been bothering me is that on a Mac, I can't see multiple Word documents that I have open. On Windows, they all appear in the taskbar (after checking the option to not collapse instances of the same program) and I can quickly switch between them, which is ... | 2012/03/24 | [
"https://apple.stackexchange.com/questions/45724",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/20621/"
] | * [Hyperdock](http://hyperdock.bahoom.com/) will give you window previews of each open window
belonging to an application by hovering over the dock icon, which you
can then click to activate.
* [Witch](http://manytricks.com/witch/) has a popup panel ... | App Exposé
==========
Trigger using swipe gesture:
* **System Preferences → Trackpad → More Gestures → App Exposé**
Trigger using keys or mouse:
* **System Preferences → Mission Control**
Dock Icon:
* You can trigger App Exposé by right-clickin... |
45,724 | I just made the switch from Windows to Mac, and one thing that's been bothering me is that on a Mac, I can't see multiple Word documents that I have open. On Windows, they all appear in the taskbar (after checking the option to not collapse instances of the same program) and I can quickly switch between them, which is ... | 2012/03/24 | [
"https://apple.stackexchange.com/questions/45724",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/20621/"
] | You can use `⌘` + `~` to toggle between multiple windows of the same app.
This is an OS X-wide keyboard shortcut, so it works in Word for Mac 2011, too. | In system preferences you can turn on the gesture for Application Exposè which is essentially Mission Control but only for either the current application or the one your cursor was hovering over in the dock at the time.
This should make it easier to see what it what, but overall it's simply not realistic to force Wind... |
45,724 | I just made the switch from Windows to Mac, and one thing that's been bothering me is that on a Mac, I can't see multiple Word documents that I have open. On Windows, they all appear in the taskbar (after checking the option to not collapse instances of the same program) and I can quickly switch between them, which is ... | 2012/03/24 | [
"https://apple.stackexchange.com/questions/45724",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/20621/"
] | * [Hyperdock](http://hyperdock.bahoom.com/) will give you window previews of each open window
belonging to an application by hovering over the dock icon, which you
can then click to activate.
* [Witch](http://manytricks.com/witch/) has a popup panel ... | You can use `⌘` + `~` to toggle between multiple windows of the same app.
This is an OS X-wide keyboard shortcut, so it works in Word for Mac 2011, too. |
45,724 | I just made the switch from Windows to Mac, and one thing that's been bothering me is that on a Mac, I can't see multiple Word documents that I have open. On Windows, they all appear in the taskbar (after checking the option to not collapse instances of the same program) and I can quickly switch between them, which is ... | 2012/03/24 | [
"https://apple.stackexchange.com/questions/45724",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/20621/"
] | * [Hyperdock](http://hyperdock.bahoom.com/) will give you window previews of each open window
belonging to an application by hovering over the dock icon, which you
can then click to activate.
* [Witch](http://manytricks.com/witch/) has a popup panel ... | In system preferences you can turn on the gesture for Application Exposè which is essentially Mission Control but only for either the current application or the one your cursor was hovering over in the dock at the time.
This should make it easier to see what it what, but overall it's simply not realistic to force Wind... |
75,038 | I want it to perform good enough as a multimedia machine. Should I get one that is fan cooled or passively cooled? I think I want one with an HDMI port.
What chipset should I look for? | 2009/11/25 | [
"https://superuser.com/questions/75038",
"https://superuser.com",
"https://superuser.com/users/-1/"
] | I agree with an Ion chipset, there's really no competition in the quiet/ITX space. I've got one of [these](http://www.newegg.com/Product/Product.aspx?Item=N82E16813500035&cm_re=zotac-_-13-500-035-_-Product) powering a secondary HTPC for my bedroom. It has a [Celeron 430](http://www.newegg.com/Product/Product.aspx?Item=... | If you want a really small system, look for a machine based on Nvidia ION - basically, it has a Atom CPU and can do 1080p output whilst keeping electricity usage low.
I have not seen many machines recently that are passively cooled, but a lot of the newer Atom boards have low noise fans. |
75,038 | I want it to perform good enough as a multimedia machine. Should I get one that is fan cooled or passively cooled? I think I want one with an HDMI port.
What chipset should I look for? | 2009/11/25 | [
"https://superuser.com/questions/75038",
"https://superuser.com",
"https://superuser.com/users/-1/"
] | I agree with an Ion chipset, there's really no competition in the quiet/ITX space. I've got one of [these](http://www.newegg.com/Product/Product.aspx?Item=N82E16813500035&cm_re=zotac-_-13-500-035-_-Product) powering a secondary HTPC for my bedroom. It has a [Celeron 430](http://www.newegg.com/Product/Product.aspx?Item=... | +1 for an ion as a multimedia machine. low power (both CPU and Wattage) but with a graphics chipset that can hadnle FULL 1080p HD.
some even come with an HDMI port.
If you want a nice easy answer, some pre built ion nettops exist such as the Acer revo, or asus ionstar |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | A year? No. Babies already require 9 months in the womb to get to where they get. You're limited because many processes in growth require chemical processes that simply take time. Humans simply aren't cars to be manufactured.
A decade? Now its getting interesting. It is reasonable to assume that a human could grow fas... | Certainly not in a year, no. Growth is limited by multiple things, for example:
* bone ossification - bones need to both grow laterally and also get ossified. There's a few values for bone growth in children [in this paper](http://www.boneandjoint.org.uk/content/jbjsbr/44-B/1/42.full.pdf) - basically, a few centimeter... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | A year? No. Babies already require 9 months in the womb to get to where they get. You're limited because many processes in growth require chemical processes that simply take time. Humans simply aren't cars to be manufactured.
A decade? Now its getting interesting. It is reasonable to assume that a human could grow fas... | **18 weeks to 6 or 8 years, but it does not matter**
9 months to produce an infant is a long time compared to the initial growth rate of the embryo. At 4 weeks, the embryo is the size of a poppy seed (2 mm long), at 8 weeks, the size of a kidney bean (16 mm head to bottom). During that period, the human increased by a... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | A year? No. Babies already require 9 months in the womb to get to where they get. You're limited because many processes in growth require chemical processes that simply take time. Humans simply aren't cars to be manufactured.
A decade? Now its getting interesting. It is reasonable to assume that a human could grow fas... | It **REALLY** depends on what level of technology we're talking about here.
After all, given sufficiently advanced technology, we could "build" a person, atom by atom, to have all the same properties, education, mental and motor functions etc. as if they had developed the normal way over many years.
---
Let's assume... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | A year? No. Babies already require 9 months in the womb to get to where they get. You're limited because many processes in growth require chemical processes that simply take time. Humans simply aren't cars to be manufactured.
A decade? Now its getting interesting. It is reasonable to assume that a human could grow fas... | Human growth is subject to many limiting factors, including the ability of the mother to supply the required nutrients to the foetus, and after birth, the ability of the child to acquire the full range of expected social skills.
A young human is physically small in order to convey the impression of youth to other huma... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | Certainly not in a year, no. Growth is limited by multiple things, for example:
* bone ossification - bones need to both grow laterally and also get ossified. There's a few values for bone growth in children [in this paper](http://www.boneandjoint.org.uk/content/jbjsbr/44-B/1/42.full.pdf) - basically, a few centimeter... | **18 weeks to 6 or 8 years, but it does not matter**
9 months to produce an infant is a long time compared to the initial growth rate of the embryo. At 4 weeks, the embryo is the size of a poppy seed (2 mm long), at 8 weeks, the size of a kidney bean (16 mm head to bottom). During that period, the human increased by a... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | Certainly not in a year, no. Growth is limited by multiple things, for example:
* bone ossification - bones need to both grow laterally and also get ossified. There's a few values for bone growth in children [in this paper](http://www.boneandjoint.org.uk/content/jbjsbr/44-B/1/42.full.pdf) - basically, a few centimeter... | Human growth is subject to many limiting factors, including the ability of the mother to supply the required nutrients to the foetus, and after birth, the ability of the child to acquire the full range of expected social skills.
A young human is physically small in order to convey the impression of youth to other huma... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | It **REALLY** depends on what level of technology we're talking about here.
After all, given sufficiently advanced technology, we could "build" a person, atom by atom, to have all the same properties, education, mental and motor functions etc. as if they had developed the normal way over many years.
---
Let's assume... | **18 weeks to 6 or 8 years, but it does not matter**
9 months to produce an infant is a long time compared to the initial growth rate of the embryo. At 4 weeks, the embryo is the size of a poppy seed (2 mm long), at 8 weeks, the size of a kidney bean (16 mm head to bottom). During that period, the human increased by a... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | **18 weeks to 6 or 8 years, but it does not matter**
9 months to produce an infant is a long time compared to the initial growth rate of the embryo. At 4 weeks, the embryo is the size of a poppy seed (2 mm long), at 8 weeks, the size of a kidney bean (16 mm head to bottom). During that period, the human increased by a... | Human growth is subject to many limiting factors, including the ability of the mother to supply the required nutrients to the foetus, and after birth, the ability of the child to acquire the full range of expected social skills.
A young human is physically small in order to convey the impression of youth to other huma... |
31,355 | In my world human(oid)s are not born anymore, they are grown in pods which mirror the conditions of a natural womb.
Children are educated before birth and are "born" as fully mature adults with a standard education ready to join society.
How long would this process take? I assume that artificial growth could be much ... | 2015/12/12 | [
"https://worldbuilding.stackexchange.com/questions/31355",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/18/"
] | It **REALLY** depends on what level of technology we're talking about here.
After all, given sufficiently advanced technology, we could "build" a person, atom by atom, to have all the same properties, education, mental and motor functions etc. as if they had developed the normal way over many years.
---
Let's assume... | Human growth is subject to many limiting factors, including the ability of the mother to supply the required nutrients to the foetus, and after birth, the ability of the child to acquire the full range of expected social skills.
A young human is physically small in order to convey the impression of youth to other huma... |
10,424,848 | I have installed all the necessary files from android site, but when I run my emulator it just displays "ANDROID" and nothing else. I am using Intel Dual core (2.20GHz), ASUS motherboard and 3gb of RAM. Whats the prob I couldnt understand.. Even one of my friend using Intel Dual core(1.80GHz) with 1gb of RAM running sm... | 2012/05/03 | [
"https://Stackoverflow.com/questions/10424848",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1349138/"
] | The emulator is slow becasue it is, of all things, emulating a completely different architecture (arm), and if it's the first time you've started it it has to create the memory file toi emulate the SD card you told it was there.
My bet would be that you simply didn't wait long enough for it to boot up.
You can save ... | The Emulator must be booting. Just waiting for it. The time is depending on your machine. |
10,424,848 | I have installed all the necessary files from android site, but when I run my emulator it just displays "ANDROID" and nothing else. I am using Intel Dual core (2.20GHz), ASUS motherboard and 3gb of RAM. Whats the prob I couldnt understand.. Even one of my friend using Intel Dual core(1.80GHz) with 1gb of RAM running sm... | 2012/05/03 | [
"https://Stackoverflow.com/questions/10424848",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1349138/"
] | The emulator is slow becasue it is, of all things, emulating a completely different architecture (arm), and if it's the first time you've started it it has to create the memory file toi emulate the SD card you told it was there.
My bet would be that you simply didn't wait long enough for it to boot up.
You can save ... | Or you might want to look at the GPU support that comes with the new SDK. It's much faster <http://android-developers.blogspot.com/2012/04/faster-emulator-with-better-hardware.html> |
33,938 | I'm trying to set Single-Click (in explorer) in some Kiosk-like PCs, running Windows XP, but I can't find any way to set it through GPO.
Is there any way to do this? | 2009/06/30 | [
"https://serverfault.com/questions/33938",
"https://serverfault.com",
"https://serverfault.com/users/132/"
] | You're not going to be able to change this with "Administrative Templates". This is one of those annoying values that's stored in a REG\_BINARY structure (specifically HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ShellState) and is wholly undocumented in structure.
You could script a registry merge to this ... | The policy is called "Turn on Classic Shell"
User Configuration | Administrative Templates | Windows components | Windows Explorer |
1,077 | Do publishers give you an advance as some sort of earnest money for your manuscript? If your work doesn't sell very well do you have to give the advance back to them?
Do they ever just buy your work and you get some money plus royalties?
thanks. | 2011/01/11 | [
"https://writers.stackexchange.com/questions/1077",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/289/"
] | **No.** That's the meaning of the word "advance": these are monies that the publisher is willing to give you up-front with the belief that your work will sell enough copies to cover the advance.
Keep in mind that the advance is not "free money": it's a portion of the royalties for your book that you receive ahead of t... | **Maybe**. If, for some unforeseen reason, the book is cancelled between the time the contract is signed and the publication date, the publisher may request that any paid-out portion of the advance be repaid.
For instance, it might happen if the first half of the book is amazing, but the second half is a complete turk... |
1,077 | Do publishers give you an advance as some sort of earnest money for your manuscript? If your work doesn't sell very well do you have to give the advance back to them?
Do they ever just buy your work and you get some money plus royalties?
thanks. | 2011/01/11 | [
"https://writers.stackexchange.com/questions/1077",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/289/"
] | **No.** That's the meaning of the word "advance": these are monies that the publisher is willing to give you up-front with the belief that your work will sell enough copies to cover the advance.
Keep in mind that the advance is not "free money": it's a portion of the royalties for your book that you receive ahead of t... | It ***really, really depends on your contract***. There may be some situations, such as you refuse to edit the book or make requested changes and the publisher cancels the contract. The best idea? Negotiate with your publisher so that the advance (against royalties) is yours. If you're contract isn't clear enough about... |
1,077 | Do publishers give you an advance as some sort of earnest money for your manuscript? If your work doesn't sell very well do you have to give the advance back to them?
Do they ever just buy your work and you get some money plus royalties?
thanks. | 2011/01/11 | [
"https://writers.stackexchange.com/questions/1077",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/289/"
] | **No.** That's the meaning of the word "advance": these are monies that the publisher is willing to give you up-front with the belief that your work will sell enough copies to cover the advance.
Keep in mind that the advance is not "free money": it's a portion of the royalties for your book that you receive ahead of t... | Generally speaking, if a pubisher gives you an advance against royalties, and then publishes your book, and the book doesn't sell well, you don't have to refund the advance. This is the normal understanding of an "advance" in the world of trade publishing. But read your contract carefully before you sign it. |
1,077 | Do publishers give you an advance as some sort of earnest money for your manuscript? If your work doesn't sell very well do you have to give the advance back to them?
Do they ever just buy your work and you get some money plus royalties?
thanks. | 2011/01/11 | [
"https://writers.stackexchange.com/questions/1077",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/289/"
] | **No.** That's the meaning of the word "advance": these are monies that the publisher is willing to give you up-front with the belief that your work will sell enough copies to cover the advance.
Keep in mind that the advance is not "free money": it's a portion of the royalties for your book that you receive ahead of t... | As someone else stated, it depends on your contract. I had a situation where I received an advance for a book proposal, but personal issues and family matters caused me to miss my deadline, and the publisher requested the money back. I hadn't spent any of it and felt it was the right thing to do because I hadn't delive... |
1,077 | Do publishers give you an advance as some sort of earnest money for your manuscript? If your work doesn't sell very well do you have to give the advance back to them?
Do they ever just buy your work and you get some money plus royalties?
thanks. | 2011/01/11 | [
"https://writers.stackexchange.com/questions/1077",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/289/"
] | **Maybe**. If, for some unforeseen reason, the book is cancelled between the time the contract is signed and the publication date, the publisher may request that any paid-out portion of the advance be repaid.
For instance, it might happen if the first half of the book is amazing, but the second half is a complete turk... | As someone else stated, it depends on your contract. I had a situation where I received an advance for a book proposal, but personal issues and family matters caused me to miss my deadline, and the publisher requested the money back. I hadn't spent any of it and felt it was the right thing to do because I hadn't delive... |
1,077 | Do publishers give you an advance as some sort of earnest money for your manuscript? If your work doesn't sell very well do you have to give the advance back to them?
Do they ever just buy your work and you get some money plus royalties?
thanks. | 2011/01/11 | [
"https://writers.stackexchange.com/questions/1077",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/289/"
] | It ***really, really depends on your contract***. There may be some situations, such as you refuse to edit the book or make requested changes and the publisher cancels the contract. The best idea? Negotiate with your publisher so that the advance (against royalties) is yours. If you're contract isn't clear enough about... | As someone else stated, it depends on your contract. I had a situation where I received an advance for a book proposal, but personal issues and family matters caused me to miss my deadline, and the publisher requested the money back. I hadn't spent any of it and felt it was the right thing to do because I hadn't delive... |
1,077 | Do publishers give you an advance as some sort of earnest money for your manuscript? If your work doesn't sell very well do you have to give the advance back to them?
Do they ever just buy your work and you get some money plus royalties?
thanks. | 2011/01/11 | [
"https://writers.stackexchange.com/questions/1077",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/289/"
] | Generally speaking, if a pubisher gives you an advance against royalties, and then publishes your book, and the book doesn't sell well, you don't have to refund the advance. This is the normal understanding of an "advance" in the world of trade publishing. But read your contract carefully before you sign it. | As someone else stated, it depends on your contract. I had a situation where I received an advance for a book proposal, but personal issues and family matters caused me to miss my deadline, and the publisher requested the money back. I hadn't spent any of it and felt it was the right thing to do because I hadn't delive... |
83,380 | I have found lots of information online about European pilots owning and flying N-reg aircraft using trusts set up in the US. I live in Europe, but I'm a US citizen, so must I also set up a trust because I don't live in the US? I cannot seem to find a definitive answer on this with references to supporting regulation. | 2021/01/08 | [
"https://aviation.stackexchange.com/questions/83380",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/52979/"
] | As a US citizen you can own an N-reg aircraft directly, regardless of where you live. The regulations on aircraft registration are in [14 CFR Part 47](https://www.ecfr.gov/cgi-bin/text-idx?node=pt14.1.47#se14.1.47_17). They say *who* can register an N-reg aircraft, but they don't say anything about *where* that person ... | According to NBAA, trusts are used by non-US citizens to register aircraft with the FAA. Because you are a US citizen, it looks like you don't need a trust to maintain the FAA registration. Here's the article with references to the FARs: <https://nbaa.org/flight-department-administration/aircraft-registration-transacti... |
83,380 | I have found lots of information online about European pilots owning and flying N-reg aircraft using trusts set up in the US. I live in Europe, but I'm a US citizen, so must I also set up a trust because I don't live in the US? I cannot seem to find a definitive answer on this with references to supporting regulation. | 2021/01/08 | [
"https://aviation.stackexchange.com/questions/83380",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/52979/"
] | As a US citizen you can own an N-reg aircraft directly, regardless of where you live. The regulations on aircraft registration are in [14 CFR Part 47](https://www.ecfr.gov/cgi-bin/text-idx?node=pt14.1.47#se14.1.47_17). They say *who* can register an N-reg aircraft, but they don't say anything about *where* that person ... | No, as a US citizen you do not need to jump through any hoops to register an N-reg aircraft in your name, anywhere in the world. It doesn't matter where you live. I used to own an N-reg aircraft when I lived in Germany. It was registered to my German address. When I moved back to the US and brought it with me I submitt... |
6,095 | The stock media player on my phone has an annoying behaviour. Whenever I unplug the headphones, if the media player is paused or not running, it immediately starts running and playing my playlist. This is very annoying because everyone in the room is forced to listen to my songs until I manage to tap (twice) the Music ... | 2011/02/17 | [
"https://android.stackexchange.com/questions/6095",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/1926/"
] | This is a known bug in Android (even in certain Eclair systems).
There's a widget called [Headset Blocker](https://market.android.com/details?id=com.idunnolol.headsetblocker) that when added to any of your homescreens and activated prevents the music player from playing whenever you unplug your headest. Freeware and i... | Since you mentioned Motorola in the question, this might be your problem: The Droid and Milestone were having this problem on Android 2.0.1 or less. It was corrected on Android 2.1. So update your phone to the latest version and it should be corrected. |
6,095 | The stock media player on my phone has an annoying behaviour. Whenever I unplug the headphones, if the media player is paused or not running, it immediately starts running and playing my playlist. This is very annoying because everyone in the room is forced to listen to my songs until I manage to tap (twice) the Music ... | 2011/02/17 | [
"https://android.stackexchange.com/questions/6095",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/1926/"
] | This is a known bug in Android (even in certain Eclair systems).
There's a widget called [Headset Blocker](https://market.android.com/details?id=com.idunnolol.headsetblocker) that when added to any of your homescreens and activated prevents the music player from playing whenever you unplug your headest. Freeware and i... | I used to have this problem on my Motorola Droid 1. I used Tasker to "stop music" on certain headset events. [See my answer here.](https://android.stackexchange.com/questions/4940/random-music-playback-winamp-cubed/4962#4962) |
56,394 | I have replaced three flats on my new bike and found each time a tear or hole at the base of the air valve. What can cause this. | 2018/08/11 | [
"https://bicycles.stackexchange.com/questions/56394",
"https://bicycles.stackexchange.com",
"https://bicycles.stackexchange.com/users/38917/"
] | 1. As Kibbee suggests, the wrong size valve.
2. A badly-formed valve hole in the rim. It's not that unusual to find that there is a "lip" of metal at the hole that will cut into the tube. This requires a bit of filing with a small round file to correct.
3. Running the tire flat or with very low pressure. As an under-in... | The most likely cause is using a presto valve is a rim that's drilled for Schrader. Make sure you're using the correct tube for your rims. You can get a grommet to fill the hole if you want to use presto tubes on rims that are drilled for Schrader.
It might also be because the pressure was too low. This can cause the... |
38,092,075 | So simply put I'm trying to make a simple search engine where I've got a MySQL database and its contents being displayed on a HTML table (using PHP to get the information) and I want to make a search bar that as you type, filters the list automatically.
I've found tutorials on how to make that with plain text where it ... | 2016/06/29 | [
"https://Stackoverflow.com/questions/38092075",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/5800070/"
] | I have doubt in the way you are passing the data.
Try to pass the data without doing **stringify** and see if it works. | 1. check if signin method is in document.ready function
2. if synchronous call is needed then you can use 'async': false
3. controller signin method expects AuthenticationModel as input parameter hence check ajax method returns the expected object, else try as string parameters in controller
4. as per the above control... |
99,841 | >
> Slight specific staining with the antibody was observed in **isolated** peripheral blood lymphocytes.
>
>
>
Would this **isolated** always evoke the meaning "[happening or existing only once, separate](http://dictionary.cambridge.org/dictionary/english/isolated)", as in
>
> There were only a few **isolated... | 2016/08/06 | [
"https://ell.stackexchange.com/questions/99841",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/2127/"
] | I would interpret this sentence as meaning "isolated ... from tissue." However, I am not a physician or biologist and I can't say whether one would interpret it differently. What I can do is quote a number of publications that use that phrase:
>
> [*Apoptogenic effect of fentanyl on freshly isolated peripheral blood ... | >
> Actually, having just searched Google Books for [in isolated peripheral blood lymphocytes](https://www.google.com/search?tbm=bks&q=%22in+isolated+peripheral+blood+lymphocytes%22) it seems to me you might be dealing with a context-specific usage here. I think the default "natural" meaning would indeed be [a small n... |
80,633 | What is the best textbook (or book) for studying Etale cohomology? | 2011/11/10 | [
"https://mathoverflow.net/questions/80633",
"https://mathoverflow.net",
"https://mathoverflow.net/users/-1/"
] | My first exposure to étale cohomology was through Bjorn Poonen's notes [Rational Points on Varieties](http://www-math.mit.edu/~poonen/papers/Qpoints.pdf), Ch. 6. Not all of the big theorems are mentioned there, but it provides a great introduction to those who have had no previous dealings with the subject. | In the web page of [Uwe Jannsen](http://www.mathematik.uni-regensburg.de/Jannsen/) there are great lecture notes of (étale cohomology) courses. In particular:
Sommersemester 2015: [Étale Kohomologie](http://www.mathematik.uni-regensburg.de/Jannsen/home/UebungSS15/seminar-Dateien/Etale-gesamt.pdf) ([Eng](http://www.mat... |
80,633 | What is the best textbook (or book) for studying Etale cohomology? | 2011/11/10 | [
"https://mathoverflow.net/questions/80633",
"https://mathoverflow.net",
"https://mathoverflow.net/users/-1/"
] | I would highly recommend [these notes](http://www.math.purdue.edu/~dvb/preprints/etale.pdf) by Donu Arapura for a good overview of etale cohomology, as well as [this short paper](http://www.tomsutherland.postgrad.shef.ac.uk/etale.pdf) by Tom Sutherland for an even quicker overview. | In the web page of [Uwe Jannsen](http://www.mathematik.uni-regensburg.de/Jannsen/) there are great lecture notes of (étale cohomology) courses. In particular:
Sommersemester 2015: [Étale Kohomologie](http://www.mathematik.uni-regensburg.de/Jannsen/home/UebungSS15/seminar-Dateien/Etale-gesamt.pdf) ([Eng](http://www.mat... |
80,633 | What is the best textbook (or book) for studying Etale cohomology? | 2011/11/10 | [
"https://mathoverflow.net/questions/80633",
"https://mathoverflow.net",
"https://mathoverflow.net/users/-1/"
] | Not a textbook, but a free PDF by J.S. Milne, <http://www.jmilne.org/math/CourseNotes/LEC.pdf>, pretty good IMHO. | My first exposure to étale cohomology was through Bjorn Poonen's notes [Rational Points on Varieties](http://www-math.mit.edu/~poonen/papers/Qpoints.pdf), Ch. 6. Not all of the big theorems are mentioned there, but it provides a great introduction to those who have had no previous dealings with the subject. |
80,633 | What is the best textbook (or book) for studying Etale cohomology? | 2011/11/10 | [
"https://mathoverflow.net/questions/80633",
"https://mathoverflow.net",
"https://mathoverflow.net/users/-1/"
] | Not a textbook, but a free PDF by J.S. Milne, <http://www.jmilne.org/math/CourseNotes/LEC.pdf>, pretty good IMHO. | In the web page of [Uwe Jannsen](http://www.mathematik.uni-regensburg.de/Jannsen/) there are great lecture notes of (étale cohomology) courses. In particular:
Sommersemester 2015: [Étale Kohomologie](http://www.mathematik.uni-regensburg.de/Jannsen/home/UebungSS15/seminar-Dateien/Etale-gesamt.pdf) ([Eng](http://www.mat... |
80,633 | What is the best textbook (or book) for studying Etale cohomology? | 2011/11/10 | [
"https://mathoverflow.net/questions/80633",
"https://mathoverflow.net",
"https://mathoverflow.net/users/-1/"
] | I'll complement the list of well known books on the subject by some freely available documents, which I find user-friendly.
[Here](http://stacks.math.columbia.edu/download/etale-cohomology.pdf) are great lecture notes , from a course that de Jong (of Stacks Project fame) gave in 2009.
Edgar José Martins Dias Costa'... | In the web page of [Uwe Jannsen](http://www.mathematik.uni-regensburg.de/Jannsen/) there are great lecture notes of (étale cohomology) courses. In particular:
Sommersemester 2015: [Étale Kohomologie](http://www.mathematik.uni-regensburg.de/Jannsen/home/UebungSS15/seminar-Dateien/Etale-gesamt.pdf) ([Eng](http://www.mat... |
80,633 | What is the best textbook (or book) for studying Etale cohomology? | 2011/11/10 | [
"https://mathoverflow.net/questions/80633",
"https://mathoverflow.net",
"https://mathoverflow.net/users/-1/"
] | I'll complement the list of well known books on the subject by some freely available documents, which I find user-friendly.
[Here](http://stacks.math.columbia.edu/download/etale-cohomology.pdf) are great lecture notes , from a course that de Jong (of Stacks Project fame) gave in 2009.
Edgar José Martins Dias Costa'... | My first exposure to étale cohomology was through Bjorn Poonen's notes [Rational Points on Varieties](http://www-math.mit.edu/~poonen/papers/Qpoints.pdf), Ch. 6. Not all of the big theorems are mentioned there, but it provides a great introduction to those who have had no previous dealings with the subject. |
80,633 | What is the best textbook (or book) for studying Etale cohomology? | 2011/11/10 | [
"https://mathoverflow.net/questions/80633",
"https://mathoverflow.net",
"https://mathoverflow.net/users/-1/"
] | I'll complement the list of well known books on the subject by some freely available documents, which I find user-friendly.
[Here](http://stacks.math.columbia.edu/download/etale-cohomology.pdf) are great lecture notes , from a course that de Jong (of Stacks Project fame) gave in 2009.
Edgar José Martins Dias Costa'... | Lei Fu, Étale Cohomology Theory is also nice and has not been mentioned yet.
And the lecture notes of Alexander Schmidt: <http://theorics.yichuanshen.de/etale-kohomologie/> (unfortunately in German) |
6,756 | It seems pretty normal to see screenshots of MS Word, steps for "this is how you generate a template". I don't think Microsoft would object.
But I'm not sure about reprinting images from in-game scenes for specific games, like Diablo II. Do you need to obtain permission to include a screenshot of a game in your book? | 2012/12/06 | [
"https://writers.stackexchange.com/questions/6756",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/389/"
] | There are four factors to determining Fair Use of copyrighted material that must be weighed in the balance:
* Purpose and character of use...better if not for profit; better if transforming in some way
* The nature of the work...factual is better, creative works less so
* The amount and substance of the work...less is... | There is a legal consideration concerning using part of one copyright work in another. The rules around it involve the quantity of material copied and the purpose for which it used.
However in your case there may be an over-riding consideration. If *Blizzard Entertainment* took exception to your use of material from *... |
6,756 | It seems pretty normal to see screenshots of MS Word, steps for "this is how you generate a template". I don't think Microsoft would object.
But I'm not sure about reprinting images from in-game scenes for specific games, like Diablo II. Do you need to obtain permission to include a screenshot of a game in your book? | 2012/12/06 | [
"https://writers.stackexchange.com/questions/6756",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/389/"
] | There is a legal consideration concerning using part of one copyright work in another. The rules around it involve the quantity of material copied and the purpose for which it used.
However in your case there may be an over-riding consideration. If *Blizzard Entertainment* took exception to your use of material from *... | The copyright information included with the game itself should tell you the answer to this. They will set out the parameters of what you can and can't do.
My hunch would be that a specific screenshot of a game in action, created by yourself, would be considered 'an original creative work' and would therefore not be re... |
6,756 | It seems pretty normal to see screenshots of MS Word, steps for "this is how you generate a template". I don't think Microsoft would object.
But I'm not sure about reprinting images from in-game scenes for specific games, like Diablo II. Do you need to obtain permission to include a screenshot of a game in your book? | 2012/12/06 | [
"https://writers.stackexchange.com/questions/6756",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/389/"
] | There is a legal consideration concerning using part of one copyright work in another. The rules around it involve the quantity of material copied and the purpose for which it used.
However in your case there may be an over-riding consideration. If *Blizzard Entertainment* took exception to your use of material from *... | Depends highly on the use.
If you were for example to make a story book and just use diablo screenshots as illustrations, that would (probably) not be considered fair use even if it is transformative. Neither would it be if you would just publish an outright art book by using the game assets as they are.
If you were ... |
6,756 | It seems pretty normal to see screenshots of MS Word, steps for "this is how you generate a template". I don't think Microsoft would object.
But I'm not sure about reprinting images from in-game scenes for specific games, like Diablo II. Do you need to obtain permission to include a screenshot of a game in your book? | 2012/12/06 | [
"https://writers.stackexchange.com/questions/6756",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/389/"
] | There are four factors to determining Fair Use of copyrighted material that must be weighed in the balance:
* Purpose and character of use...better if not for profit; better if transforming in some way
* The nature of the work...factual is better, creative works less so
* The amount and substance of the work...less is... | The copyright information included with the game itself should tell you the answer to this. They will set out the parameters of what you can and can't do.
My hunch would be that a specific screenshot of a game in action, created by yourself, would be considered 'an original creative work' and would therefore not be re... |
6,756 | It seems pretty normal to see screenshots of MS Word, steps for "this is how you generate a template". I don't think Microsoft would object.
But I'm not sure about reprinting images from in-game scenes for specific games, like Diablo II. Do you need to obtain permission to include a screenshot of a game in your book? | 2012/12/06 | [
"https://writers.stackexchange.com/questions/6756",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/389/"
] | There are four factors to determining Fair Use of copyrighted material that must be weighed in the balance:
* Purpose and character of use...better if not for profit; better if transforming in some way
* The nature of the work...factual is better, creative works less so
* The amount and substance of the work...less is... | Depends highly on the use.
If you were for example to make a story book and just use diablo screenshots as illustrations, that would (probably) not be considered fair use even if it is transformative. Neither would it be if you would just publish an outright art book by using the game assets as they are.
If you were ... |
6,756 | It seems pretty normal to see screenshots of MS Word, steps for "this is how you generate a template". I don't think Microsoft would object.
But I'm not sure about reprinting images from in-game scenes for specific games, like Diablo II. Do you need to obtain permission to include a screenshot of a game in your book? | 2012/12/06 | [
"https://writers.stackexchange.com/questions/6756",
"https://writers.stackexchange.com",
"https://writers.stackexchange.com/users/389/"
] | Depends highly on the use.
If you were for example to make a story book and just use diablo screenshots as illustrations, that would (probably) not be considered fair use even if it is transformative. Neither would it be if you would just publish an outright art book by using the game assets as they are.
If you were ... | The copyright information included with the game itself should tell you the answer to this. They will set out the parameters of what you can and can't do.
My hunch would be that a specific screenshot of a game in action, created by yourself, would be considered 'an original creative work' and would therefore not be re... |
213,778 | I want to perform a statistical test: Wilcoxon Signed Rank Test to test if there is a significant difference between them, but I don't know if the two samples are dependent or not?
Context: I have a dataset that contains a set of elements, I want to predict the dependent variable, I use two models A and B to perform th... | 2016/05/21 | [
"https://stats.stackexchange.com/questions/213778",
"https://stats.stackexchange.com",
"https://stats.stackexchange.com/users/116392/"
] | The answer is *dependent*. Or, to be a bit more precise: paired.
The thing to keep in mind here is that you only have one sample, and have two measurements for each observations in that sample.
If, instead, you had two distinct samples (e.g., one representing the first 100 cases in your data set and the other the se... | Two or more samples are said to be dependent, in short, if one sample is dependent or is influenced by another. Suppose, one wants to study earning difference between men and women. So s/he randomly selects 100 men and 100 women, and records interested variable values. In this case, the samples are independent because ... |
9,929 | One of Blackberry's [strongest assets](http://www.marketwatch.com/story/rim-the-long-slow-death-spiral-begins-2011-12-20?pagenumber=2) is the "network" that it uses. Can someone explain, or link to technical information that covers what this secure network is, and what it does better than the rest? | 2011/12/20 | [
"https://security.stackexchange.com/questions/9929",
"https://security.stackexchange.com",
"https://security.stackexchange.com/users/396/"
] | How dare you! How dare you question the most secure mobile platform available to mankind! My attempt at humor there.. now to a serious answer before the mods attack. Blackberry has some whitepapers regarding security here: <http://us.blackberry.com/ataglance/security/>
I would argue the network is not RIM's strongest ... | Blackberry Architecture is designed in such a way that the entire communication (data and not voice channel) is managed by the blackberry servers ecosystem in highly secured manner. The telco data channel acts as a carrier and transport medium of data packets to and fro between the mobile device and the blackberry serv... |
9,929 | One of Blackberry's [strongest assets](http://www.marketwatch.com/story/rim-the-long-slow-death-spiral-begins-2011-12-20?pagenumber=2) is the "network" that it uses. Can someone explain, or link to technical information that covers what this secure network is, and what it does better than the rest? | 2011/12/20 | [
"https://security.stackexchange.com/questions/9929",
"https://security.stackexchange.com",
"https://security.stackexchange.com/users/396/"
] | Obscurity. No seriously though. Thanks to Blackberry enterprise server (which has been out for years), corporate mobile phones were able to be managed and controlled through a policy set or a group of "rules".. Not altogether unlike your windows user account at work on your company domain controlled by Active Directory... | Blackberry Architecture is designed in such a way that the entire communication (data and not voice channel) is managed by the blackberry servers ecosystem in highly secured manner. The telco data channel acts as a carrier and transport medium of data packets to and fro between the mobile device and the blackberry serv... |
34,995 | I planted red and new potatoes in early May. They were planted 6-8 inches deep. The potatoes were sprouted potatoes from our local hardware store. Our soil is heavy clay but the potatoes were planted in purchased hummus which had been worked into the soil to a depth of about 15 inches. Our climate zone is zone 9B.
[!... | 2017/08/13 | [
"https://gardening.stackexchange.com/questions/34995",
"https://gardening.stackexchange.com",
"https://gardening.stackexchange.com/users/19536/"
] | Judging by the state of the plants when you dug them up, and what the soil surface looks like there are no nutrients whatever in it.
The potatoes *tried* to grow, using the material stored in the tuber, but that's as much as they managed to do. The leaves never developed properly, nor did the roots. They would have gr... | >
> However, the summer here has been very hot
>
>
>
This might very well be the reason. Potatoes tend to stop the production of tubers once the soil reaches a certain temperature. Gardeners that plant their potatoes in dark plastic bags and unwittingly put the bags into a sunny spot often have the same problem.
... |
34,995 | I planted red and new potatoes in early May. They were planted 6-8 inches deep. The potatoes were sprouted potatoes from our local hardware store. Our soil is heavy clay but the potatoes were planted in purchased hummus which had been worked into the soil to a depth of about 15 inches. Our climate zone is zone 9B.
[!... | 2017/08/13 | [
"https://gardening.stackexchange.com/questions/34995",
"https://gardening.stackexchange.com",
"https://gardening.stackexchange.com/users/19536/"
] | >
> However, the summer here has been very hot
>
>
>
This might very well be the reason. Potatoes tend to stop the production of tubers once the soil reaches a certain temperature. Gardeners that plant their potatoes in dark plastic bags and unwittingly put the bags into a sunny spot often have the same problem.
... | In addition to the answers above (*especially* regarding the need to improve the soil) you should be prepared to periodically mound more soil or mulch or straw around the plants as they grow. The tubers actually grow along the stems of the plants, so if you don't cover them up, you may grow larger plants next year, but... |
34,995 | I planted red and new potatoes in early May. They were planted 6-8 inches deep. The potatoes were sprouted potatoes from our local hardware store. Our soil is heavy clay but the potatoes were planted in purchased hummus which had been worked into the soil to a depth of about 15 inches. Our climate zone is zone 9B.
[!... | 2017/08/13 | [
"https://gardening.stackexchange.com/questions/34995",
"https://gardening.stackexchange.com",
"https://gardening.stackexchange.com/users/19536/"
] | Judging by the state of the plants when you dug them up, and what the soil surface looks like there are no nutrients whatever in it.
The potatoes *tried* to grow, using the material stored in the tuber, but that's as much as they managed to do. The leaves never developed properly, nor did the roots. They would have gr... | In addition to the answers above (*especially* regarding the need to improve the soil) you should be prepared to periodically mound more soil or mulch or straw around the plants as they grow. The tubers actually grow along the stems of the plants, so if you don't cover them up, you may grow larger plants next year, but... |
83,697 | Everybody needs a leisure activity. Most of the books I need for mine are downstairs, with none in the bedroom. But as I like to keep an eye on things I have this (unsorted) pile by my bed to remind me.
**What's my hobby?**
[](https://i.stack.imgur.c... | 2019/05/06 | [
"https://puzzling.stackexchange.com/questions/83697",
"https://puzzling.stackexchange.com",
"https://puzzling.stackexchange.com/users/58787/"
] | Your hobby is
>
> **birdwatching** (hinted by the word "hobby" and the reference to "keeping an eye on things").
>
>
>
We have:
>
> The Four **Feathers**
>
> What is the name of this book? (published by **Pelican**)
>
> Poems of Matthew **Arnold** -- "Arnold" means something like "strength of the eagl... | I think your hobby might be
>
> [Scramblers](https://en.wikipedia.org/wiki/Scrambler)
>
>
>
Reasoning
>
> Take the first letter of the first author name, if shown, otherwise take the last letter of the last name. Then rearrage:
>
> **S** tephen Jay Gould
> **C** olm Tóibín
> **R** aymond Smully... |
1,687 | Editing a question has the effect of bumping it on top of the front page.
Should we limit the number of edits done on old questions? Bumping forty old questions in the front page has just the effect to hide the newest questions.
I am asking the question because something I observed between today, and yesterday. I a... | 2011/07/29 | [
"https://english.meta.stackexchange.com/questions/1687",
"https://english.meta.stackexchange.com",
"https://english.meta.stackexchange.com/users/252/"
] | Are you referring to JSBangs removing a tag from 40 different questions? That's the only thing I see at the moment, scrolling down.
If you need to remove a lot of tags, **you should post a request here on meta,** since developers have the ability to destroy tags without causing revisions.
So the mistake in this case ... | For me, this brings the related question: **should tag edits really bump questions?** They are most often done either when the question is young, because it was badly tagged by its author (and thus in the top of the list anyway), or on old questions as part of retagging efforts (in which case, do we want to bump it?). |
827,893 | I have two menu items for dir, mark, regexp, multiple and single on the menu bar in dired mode. While it doesn't affect the usage, but it seems something is wrong and makes me feel uncomfortable. Anyone know what is the cause?
Thank you very much! | 2014/10/17 | [
"https://superuser.com/questions/827893",
"https://superuser.com",
"https://superuser.com/users/380371/"
] | Do you see this problem already with `emacs -Q`?
If not, then try to see which part of your config file triggers this problem. | Someone else has the same issue. Here is the bug report
<https://bitbucket.org/lyro/evil/issue/404/dired-menus-are-duplicated> |
71,321 | My daughter is 8 and has been taking private piano lessons for around 3 months now but will take a break from lessons over the summer. In the fall (when school starts back up) she will be taking cello lessons at school.
What if anything can I do with her over the summer on the piano that will help prepare her or make ... | 2018/05/25 | [
"https://music.stackexchange.com/questions/71321",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/10492/"
] | I have a couple of thoughts. First, she will be reading primarily bass clef for cello, so any drilling of those notes in particular will be useful. Also, help her to "forget" her piano fingering. I have piano students who play stringed instruments and discussing fingering is such a pain. I wish there was a universal fi... | Some of your preparation you will probably want to do off of the piano.
Work with your student on being able to quickly and easily identify letters that come before other letters, and recite the alphabet backwards from G. This will aid in knowing the note names on the finger board and in the sheet music. Normally peop... |
9,970,713 | I am having real trouble with provisioning and code signing issues. I have migrated to a new computer and have a bunch of "Valid signing identity not found" messages. In repeated attempts to fix distribution code signing I have managed to lose my developer code signing as well.
I am the first to admit that the root pr... | 2012/04/02 | [
"https://Stackoverflow.com/questions/9970713",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/401543/"
] | **Step 1**: Open XCode. In the Organizer, delete all provisioning profiles.
**Step 2**: Open Keychain Access (Utilities>Keychain Access); delete all certificates related to developer/distribution and the WWDCCA (or whatever it's called) intermediate certificate.
**Step 3**: Re-download and resign. Make sure you expor... | Have a look at this tutorial here. You may find this helpful
<http://seventhsoulmountain.blogspot.com/2013/09/ios-code-sign-in-complete-walkthrough.html> |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I've seen this particular problem many times, and a lot of it has to do with how Windows handles DPI scaling.
Since you are using a Retina MBP - which has an extremely high resolution, you'll want Parallels to manage the DPI of your Windows VM. You can do this under your Virtual Machine's configuration, Hardware, Vide... | I had the exact same problem. I went a different route, and decided to sacrifice the nice high-DPI of the Retina for a scaled solution that makes everything look right.
1. In Parallels VM Config → Hardware → Video → Resolution
Use: **Scaled**
Not: Best for Retina, More Space
2. Restart VM
3. Windows Display Settin... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I've seen this particular problem many times, and a lot of it has to do with how Windows handles DPI scaling.
Since you are using a Retina MBP - which has an extremely high resolution, you'll want Parallels to manage the DPI of your Windows VM. You can do this under your Virtual Machine's configuration, Hardware, Vide... | All my coworkers had the same problem. In Parallels 9, you can set for every VM if it should be **scaled**, **best for retina** or **more space**. As DPI scaling under Windows is inherently broken, as application developers have to support this, and many just don't, it's not useful you can configure this at all, which ... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I've seen this particular problem many times, and a lot of it has to do with how Windows handles DPI scaling.
Since you are using a Retina MBP - which has an extremely high resolution, you'll want Parallels to manage the DPI of your Windows VM. You can do this under your Virtual Machine's configuration, Hardware, Vide... | I have a new solution for this,set the video properties to "Scaled" and the video memory to 256MB.
One's you do this , go back to your windows--> Control Panel --> Display --> Set it to Smaller(100%).
check the Screen Resolution now it shows 1436\*756 on a M... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I've seen this particular problem many times, and a lot of it has to do with how Windows handles DPI scaling.
Since you are using a Retina MBP - which has an extremely high resolution, you'll want Parallels to manage the DPI of your Windows VM. You can do this under your Virtual Machine's configuration, Hardware, Vide... | The solution of this problem is here... Just forget about all the old advises and read this.
I've MacBook Pro Retina 15"
The problem's started when I've setup Parallel Desktop 9 and installed WIN 8.1, after that I've installed the Parallels Tools .. Than .. on WIN ... the screen resolution is SO high because of the R... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I had the exact same problem. I went a different route, and decided to sacrifice the nice high-DPI of the Retina for a scaled solution that makes everything look right.
1. In Parallels VM Config → Hardware → Video → Resolution
Use: **Scaled**
Not: Best for Retina, More Space
2. Restart VM
3. Windows Display Settin... | All my coworkers had the same problem. In Parallels 9, you can set for every VM if it should be **scaled**, **best for retina** or **more space**. As DPI scaling under Windows is inherently broken, as application developers have to support this, and many just don't, it's not useful you can configure this at all, which ... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I had the exact same problem. I went a different route, and decided to sacrifice the nice high-DPI of the Retina for a scaled solution that makes everything look right.
1. In Parallels VM Config → Hardware → Video → Resolution
Use: **Scaled**
Not: Best for Retina, More Space
2. Restart VM
3. Windows Display Settin... | I have a new solution for this,set the video properties to "Scaled" and the video memory to 256MB.
One's you do this , go back to your windows--> Control Panel --> Display --> Set it to Smaller(100%).
check the Screen Resolution now it shows 1436\*756 on a M... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I had the exact same problem. I went a different route, and decided to sacrifice the nice high-DPI of the Retina for a scaled solution that makes everything look right.
1. In Parallels VM Config → Hardware → Video → Resolution
Use: **Scaled**
Not: Best for Retina, More Space
2. Restart VM
3. Windows Display Settin... | The solution of this problem is here... Just forget about all the old advises and read this.
I've MacBook Pro Retina 15"
The problem's started when I've setup Parallel Desktop 9 and installed WIN 8.1, after that I've installed the Parallels Tools .. Than .. on WIN ... the screen resolution is SO high because of the R... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I have a new solution for this,set the video properties to "Scaled" and the video memory to 256MB.
One's you do this , go back to your windows--> Control Panel --> Display --> Set it to Smaller(100%).
check the Screen Resolution now it shows 1436\*756 on a M... | All my coworkers had the same problem. In Parallels 9, you can set for every VM if it should be **scaled**, **best for retina** or **more space**. As DPI scaling under Windows is inherently broken, as application developers have to support this, and many just don't, it's not useful you can configure this at all, which ... |
86,573 | I'm using Parallels on my mac. But when I open a software the font are so small, it's very weird. Can anyone help me out!!!
The picture above is when I open up my chrome, how can I fix it? | 2013/03/24 | [
"https://apple.stackexchange.com/questions/86573",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/26496/"
] | I have a new solution for this,set the video properties to "Scaled" and the video memory to 256MB.
One's you do this , go back to your windows--> Control Panel --> Display --> Set it to Smaller(100%).
check the Screen Resolution now it shows 1436\*756 on a M... | The solution of this problem is here... Just forget about all the old advises and read this.
I've MacBook Pro Retina 15"
The problem's started when I've setup Parallel Desktop 9 and installed WIN 8.1, after that I've installed the Parallels Tools .. Than .. on WIN ... the screen resolution is SO high because of the R... |
17,015 | I have moved into a house with a nice Wolf-range griddle, and I would like to know what the primary advantages of the griddle are over a cast-iron skillet, including, is there anything I can do with a griddle that can not be done with a skillet?
I have found that the primary downside to using the griddle is the time i... | 2011/08/21 | [
"https://cooking.stackexchange.com/questions/17015",
"https://cooking.stackexchange.com",
"https://cooking.stackexchange.com/users/3418/"
] | Yes, you don't have the edge of a pan in the way when going to flip things, but it also means that you don't have a mass of metal there to add as a heat sink, which can help dramatically when pre-heating your pans, as they'll be evenly heated across their bottom more quickly (at least, compared to something of the same... | I would say the biggest advantage, which you've hinted at, is being able to use a spatula for quick and easy flipping (think pancakes, french toast, etc). Apart from its shape and size, there really is no other difference (even the difference in heat-up time, I've found, is negligible). |
17,015 | I have moved into a house with a nice Wolf-range griddle, and I would like to know what the primary advantages of the griddle are over a cast-iron skillet, including, is there anything I can do with a griddle that can not be done with a skillet?
I have found that the primary downside to using the griddle is the time i... | 2011/08/21 | [
"https://cooking.stackexchange.com/questions/17015",
"https://cooking.stackexchange.com",
"https://cooking.stackexchange.com/users/3418/"
] | I would say the biggest advantage, which you've hinted at, is being able to use a spatula for quick and easy flipping (think pancakes, french toast, etc). Apart from its shape and size, there really is no other difference (even the difference in heat-up time, I've found, is negligible). | I'm going to just use to frying pans ('skillets'). The lack of sides allows stuff to fall off too easily - I fried chopped onions today - and there's no carrying handle - so you can't move the griddle to plate up. The other downer - my griddle's cast iron and it's just cracked while heating it ! |
17,015 | I have moved into a house with a nice Wolf-range griddle, and I would like to know what the primary advantages of the griddle are over a cast-iron skillet, including, is there anything I can do with a griddle that can not be done with a skillet?
I have found that the primary downside to using the griddle is the time i... | 2011/08/21 | [
"https://cooking.stackexchange.com/questions/17015",
"https://cooking.stackexchange.com",
"https://cooking.stackexchange.com/users/3418/"
] | Yes, you don't have the edge of a pan in the way when going to flip things, but it also means that you don't have a mass of metal there to add as a heat sink, which can help dramatically when pre-heating your pans, as they'll be evenly heated across their bottom more quickly (at least, compared to something of the same... | Surface area is the biggest difference. You can do a much larger job on a griddle than in a skillet. Even 2 or 3 jobs at time, and when you are done there is just the griddle to clean and not several items.
You will also want to pick up a '[bacon press](http://rads.stackoverflow.com/amzn/click/B00004UE7B)' to minimiz... |
17,015 | I have moved into a house with a nice Wolf-range griddle, and I would like to know what the primary advantages of the griddle are over a cast-iron skillet, including, is there anything I can do with a griddle that can not be done with a skillet?
I have found that the primary downside to using the griddle is the time i... | 2011/08/21 | [
"https://cooking.stackexchange.com/questions/17015",
"https://cooking.stackexchange.com",
"https://cooking.stackexchange.com/users/3418/"
] | Surface area is the biggest difference. You can do a much larger job on a griddle than in a skillet. Even 2 or 3 jobs at time, and when you are done there is just the griddle to clean and not several items.
You will also want to pick up a '[bacon press](http://rads.stackoverflow.com/amzn/click/B00004UE7B)' to minimiz... | I'm going to just use to frying pans ('skillets'). The lack of sides allows stuff to fall off too easily - I fried chopped onions today - and there's no carrying handle - so you can't move the griddle to plate up. The other downer - my griddle's cast iron and it's just cracked while heating it ! |
17,015 | I have moved into a house with a nice Wolf-range griddle, and I would like to know what the primary advantages of the griddle are over a cast-iron skillet, including, is there anything I can do with a griddle that can not be done with a skillet?
I have found that the primary downside to using the griddle is the time i... | 2011/08/21 | [
"https://cooking.stackexchange.com/questions/17015",
"https://cooking.stackexchange.com",
"https://cooking.stackexchange.com/users/3418/"
] | Yes, you don't have the edge of a pan in the way when going to flip things, but it also means that you don't have a mass of metal there to add as a heat sink, which can help dramatically when pre-heating your pans, as they'll be evenly heated across their bottom more quickly (at least, compared to something of the same... | I'm going to just use to frying pans ('skillets'). The lack of sides allows stuff to fall off too easily - I fried chopped onions today - and there's no carrying handle - so you can't move the griddle to plate up. The other downer - my griddle's cast iron and it's just cracked while heating it ! |
8,927 | I work in a small but growing team of UX designers developing a suite of web applications. It's become obvious that we would benefit from a common pattern library, but are unsure how to get started or what tool we should use.
We want something that we can collaborate on and also share with visual designers and develop... | 2011/07/12 | [
"https://ux.stackexchange.com/questions/8927",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/4500/"
] | There are several [design pattern repositories listed on Konigi web](http://konigi.com/wiki/design-pattern-repositories). From these, [Patternry](http://patternry.com/) allows you to create public and private collections of patterns. | Not a tool that I have got round to using myself yet but [Quince](http://quince.infragistics.com/) seems interesting.
Personally I have found that having my own patterns sketchbook has been very useful, but I think you are looking for something more advanced and collaborative? |
8,927 | I work in a small but growing team of UX designers developing a suite of web applications. It's become obvious that we would benefit from a common pattern library, but are unsure how to get started or what tool we should use.
We want something that we can collaborate on and also share with visual designers and develop... | 2011/07/12 | [
"https://ux.stackexchange.com/questions/8927",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/4500/"
] | We have put together our own Wiki-based pattern library that contains screenshots, descriptions of use-cases, and notes on variations of the element/widget. The intention of the library was to enforce standardized designs across the different applications. In this regard, it has been of limited success. I attribute thi... | Not a tool that I have got round to using myself yet but [Quince](http://quince.infragistics.com/) seems interesting.
Personally I have found that having my own patterns sketchbook has been very useful, but I think you are looking for something more advanced and collaborative? |
8,927 | I work in a small but growing team of UX designers developing a suite of web applications. It's become obvious that we would benefit from a common pattern library, but are unsure how to get started or what tool we should use.
We want something that we can collaborate on and also share with visual designers and develop... | 2011/07/12 | [
"https://ux.stackexchange.com/questions/8927",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/4500/"
] | We currently use a wiki that we have customized. It allows us to create detailed specs (flow charts, images, code snippets, comments, a history etc) that anyone with an account can access. Within this we have pixel specs and a library of common UI elements that are linked to pages (if needed) that explain the interacti... | There's a market for this type of product. We've done a lot of research on it and haven't found one that really fits the bill yet.
In the past two org's I've worked on, we've built skunkworks pattern/component libraries by hand...typically a loose mix of PHP includes. We're toying with the idea of building some custo... |
8,927 | I work in a small but growing team of UX designers developing a suite of web applications. It's become obvious that we would benefit from a common pattern library, but are unsure how to get started or what tool we should use.
We want something that we can collaborate on and also share with visual designers and develop... | 2011/07/12 | [
"https://ux.stackexchange.com/questions/8927",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/4500/"
] | There are several [design pattern repositories listed on Konigi web](http://konigi.com/wiki/design-pattern-repositories). From these, [Patternry](http://patternry.com/) allows you to create public and private collections of patterns. | We currently use a wiki that we have customized. It allows us to create detailed specs (flow charts, images, code snippets, comments, a history etc) that anyone with an account can access. Within this we have pixel specs and a library of common UI elements that are linked to pages (if needed) that explain the interacti... |
8,927 | I work in a small but growing team of UX designers developing a suite of web applications. It's become obvious that we would benefit from a common pattern library, but are unsure how to get started or what tool we should use.
We want something that we can collaborate on and also share with visual designers and develop... | 2011/07/12 | [
"https://ux.stackexchange.com/questions/8927",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/4500/"
] | We currently use a wiki that we have customized. It allows us to create detailed specs (flow charts, images, code snippets, comments, a history etc) that anyone with an account can access. Within this we have pixel specs and a library of common UI elements that are linked to pages (if needed) that explain the interacti... | I've worked with various approaches to such libraries from creating graffle stencils to full design repos complete with wikis and working code widgets. If you have the resource and time, the latter does have some real benefits as fully coded examples can be useful in clarifying the patterns more comprehensively e.g. yo... |
8,927 | I work in a small but growing team of UX designers developing a suite of web applications. It's become obvious that we would benefit from a common pattern library, but are unsure how to get started or what tool we should use.
We want something that we can collaborate on and also share with visual designers and develop... | 2011/07/12 | [
"https://ux.stackexchange.com/questions/8927",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/4500/"
] | Not a tool that I have got round to using myself yet but [Quince](http://quince.infragistics.com/) seems interesting.
Personally I have found that having my own patterns sketchbook has been very useful, but I think you are looking for something more advanced and collaborative? | I've worked with various approaches to such libraries from creating graffle stencils to full design repos complete with wikis and working code widgets. If you have the resource and time, the latter does have some real benefits as fully coded examples can be useful in clarifying the patterns more comprehensively e.g. yo... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.