reviewerID stringlengths 10 21 | asin stringlengths 10 10 | reviewerName stringlengths 0 49 ⌀ | helpful list | reviewText stringlengths 0 32.8k | overall float64 1 5 | summary stringlengths 0 452 | unixReviewTime int64 861M 1.41B ⌀ | reviewTime stringlengths 9 11 |
|---|---|---|---|---|---|---|---|---|
A1DNXX5IDFFM4O | B00005JPS8 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | The fact is that Robert makes Tony Stark come to life. As with any of this FX action driven movies and the fact that it has a comic book origin, it will have some awful holes in some of the plot. Suspension of disbelief is good enough here as you spend moments wondering what Tony Stark is going to do or say next... I mean Robert Downey Dr... see what I mean? A fun movie and the final big battle sequence does work so I leave the movie not scratching my head about details. | 4 | Simply good. | 1,403,222,400 | 06 20, 2014 |
A1DNXX5IDFFM4O | B0000BYEJA | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I worked in a professional kitchen and had become accustomed to this brand. The consumer version is a little different and the hardness had changed a little. Overall, the edges are good and stay that way with just a little dressing from the stick. They might not be top of the line German steel, but they are consistent and sturdy. | 4 | Cutlery that I recognise... | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B0000DD6M5 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | This will fit the newer DeWalt flip counter sink bit, but the older ones are not as deep and so the bit is a little too long to fit correctly. For me it was a little time with the Dremal and the adjustments put it in my old flip bit. Sure, I'm looking to get the newer kit, but the current kit is still in good shape. Ryobi might still have a better fitting bit? This one was about almost a 1/4" too long for my use and the milled flat for the lock nut was extended. | 4 | This was as close as I could get to my flip... | 1,403,222,400 | 06 20, 2014 |
A1DNXX5IDFFM4O | B00016R1P0 | Wah the Y Yee "MysteryOnion" | [
3,
3
] | I found out while trying to load my reel that the film would not fit right, just bunch up at the center. I later measured it and it turned out to be wider than the film and the spiral was over welded leaving NO room for the film to slip in to. I needed the 220 reel bad so I kept it and had to dremal and pinch it to make it fit the film and yet was still hard to use. Not worth the 11 dollars may be two for 5. They should inspect their inventory more carefully! Also not remove the negative reviews. | 1 | Junk reel. If your desperate... buyer beware! | 1,263,600,000 | 01 16, 2010 |
A1DNXX5IDFFM4O | B00017LSPI | Wah the Y Yee "MysteryOnion" | [
0,
0
] | It is more than powerful enough for the dust on lenses and blasting grit off surfaces. Do use with care if you are clearing dust from CCD or CMOS sensors. My only issue is the inlet valve... why? If the output end had a valve, then it would work well. At least with my version the seems to not use the inlet valve at all. | 4 | This blows... thats a good thing! | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B0001M6K24 | Wah the Y Yee "MysteryOnion" | [
12,
14
] | So I have a high end Super-Multi-Coated filter and now it has swirl marks. I did pre-cleaned the surface first to remove heavy grit and dirt. This is a blower and finally light swabbing with a Pec*Pad. Then switched over to the Eclipse liquid and followed instructions. As a previous reviewer had done, I looked over the surface with a high intensity light and could see fine marks... It was later I tried to clean a junk lens and moved the pad in a linear direction and tested under light and found the fine scratches in the direction of the cleaning. So I would say that this is not as safe as claimed. It also leaves residues behind from either the pad or the oils that are loosened, but not absorbed so I would only be pushing the oils around. My micro-fiber cloths are far better...infinitely better and pass all light tests for scratches. It looks like I should go back to microfiber cloths at $7 bucks a pop and keep retiring them every dozen uses...$$$. | 1 | PEC*PAD not are maybe safe on anything but coated lenes | 1,321,920,000 | 11 22, 2011 |
A1DNXX5IDFFM4O | B0001X0SK8 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | If you have Japanese screws to work with, then you need these. So far, they have had no issues with stubborn screws and I have yet to gouge a slot. In most cases, the fit is very snug. Easy to magnetize and de-magnetize. | 5 | Very nice and precise. | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B0002I5RI0 | Wah the Y Yee "MysteryOnion" | [
2,
2
] | For a sub-$10 it is a very good headphone. The box has a claimed 8-20,000 Hz and my simple test is to run a tone generator (Audacity) and see if I could hear anything. A 15Hz it is not problem, at 10Hz it is clear, at 9Hz it is a little rough and at 8Hz it is very dirty. This is not a clean scientific test and maybe doing this tone generator test is not the right way, but I was pumping the sound wit the same computers that I would be using the headphones on and so this is a good indicator of performance for my needs. So...blah, blah, blah, how do they sound? Well, I would say that they sound good in most applications. Music from a good old CD play reveals that the response is very good, but not as good as my $40 set. My go to CD has very subtle sounds and a very hard to hear bell that starts off in a song. Only a hand full of ear buds and headphones can reveal this. A friend's $100 old high end set separates this sound out from the rest of the instruments well. The set of headphones gives some clarity and does put to shame a few $20+ phones, but still not as clean as a $40 Sony set I used to have. | 5 | Lots of performance for the price | 1,391,990,400 | 02 10, 2014 |
A1DNXX5IDFFM4O | B0002SRGXY | Wah the Y Yee "MysteryOnion" | [
1,
1
] | After reading the many negative reviews for this tool and mostly because of its origins in China, I was looking high and low for a USA made one and with no affordable results. I've been burned on a few made in China products and baulked many times prior to giving in and getting this one. Many cheaper ones that are also made in China have been stated as bending inside the first use, but I gambled that this one was worth the extra money. It has held up for three projects so far and with no sign of warping. It was measured on a flat surface prior and after with no signs of change so far. I prefer old fashioned over built American and it is a pity that I had to hold my breath and constantly worry about breakage. | 5 | Looks good considering. | 1,385,078,400 | 11 22, 2013 |
A1DNXX5IDFFM4O | B000B868MK | Wah the Y Yee "MysteryOnion" | [
0,
0
] | It works well and the reflector that is included works well.One sad thing is that the original or first run kits included a nice heavy duty glass lens. | 5 | Bright! | 1,390,262,400 | 01 21, 2014 |
A1DNXX5IDFFM4O | B000BZL47W | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Got it for my 97 ZJ for the familiar bad gauge readings. I figured, while I was at it I would swap out the pump as well. No issues and apart from the modified necessary steps for removing due to my tank armor... it was very straight forward.DIY folks for Jeep ZJ: Unplug Fuel Pump relay, bleed pressure, jack up rear, loosen bracket line bracket from upper control arms, unlock any reachable retaining clips, disconnect wiring harness, disconnect at the tank filler and vent tubes leading from filler door, position jack/hoist under gas tank or drain first, loosen tank strap nuts... or remove trailer hitch first and then tank armor, unhook straps from slots, lower fuel tank slightly, unclip fuel line from pump, vent tubes, lower completely fuel tank, drain remaining fuel or spin off pump retaining ring with punch and hammer and then drain remainder, wipe off inside and inspect for clean, swap in filter and pump... reverse steps. | 5 | It fits and it works | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B000C3XDA4 | Wah the Y Yee "MysteryOnion" | [
1,
1
] | For use with the 2003 VW NEW Beetle 1.8T and with 0w-40 synth.Ever since the death of the warranty and therefore the dealer oil jobs dried up, we started taking the bug a few times to one of those instant-easy-lube-in-a "jiff" outfits making a mess of things and error codes and sludge i$$ue$, I decided to do it myself.So I've taken to using currently the Mobile 1 full synths and matched it with the Mobile 1 filter and all seemed OK, but I then tested a few others prior to staying with the K&N.; On the Turbo model, it seemed that short/standard filters were inadequate. Some filters actually had issues with the quality of the element inside and a few just seemed to not handle the pressure correctly.The [B]K&N;[/B]... No oil pressure error worries, no signs of defects, no signs of problems during oil changes. It is easy to secure with the 1" hex top and therefore easy to remove later. No signs of issues with the element due to over pressure when examined after removal. For the extra $2-3 dollars it with worth not having to worry about paying for a $3000 engine. | 5 | Nice to go overboard than on the cheap. | 1,361,577,600 | 02 23, 2013 |
A1DNXX5IDFFM4O | B000C55LPW | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Night and day difference... well to be fair that the originals had completely pooped out. If you have a non-UpCountry Jeep and know that the stock shocks tend to imitate a bucking bronco when things start to get a little long in the tooth, then you know how bad it can be and you will enjoy these shocks. Cornering had been far better and braking is now as if I had new rotors... actually I do have new rotors, but the mushy oem shock made it all feel bad.I figure if I had upgraded all my rubber in the suspension that is would feel more better, but these shocks do quite a nice job right now!Update: much of the rubber has been replaced and the Sensa-Trac is now a big bonus in how all of it feels! | 5 | Pleased with a less shocking ride! | 1,385,078,400 | 11 22, 2013 |
A1DNXX5IDFFM4O | B000C8Z8NY | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Got it for my 97 ZJ and it is almost about right... as noted by another reviewer, a little shorter. The new tail pipe also purchased was a little longer and so that balanced out well. | 4 | Sounds about right. | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B000C91FB2 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Yes... wrong hanger. I have a new hanger on order to weld on later. Overall, the pipe seems good and if I had paid more attention to the picture, I would have possibly not purchased this model... but then, what is the percentage that a Amazon image is right? If you are looking to plug this in without issues, note your hanger. On my 97 ZJ, the hanger is running front to back and this Walker 54079 I received runs left/right and has a hook down end as well. | 3 | Walked into this one... | 1,385,942,400 | 12 2, 2013 |
A1DNXX5IDFFM4O | B000CGTN7S | Wah the Y Yee "MysteryOnion" | [
0,
0
] | It was easy to install and no surprises with fit. Remember to reuse the rubber cover at the steering box as it does not come with a new one. As mentioned, this is the non-proportional pressure hose. Torqued down everything and checked later... no leaks. The small concern is the two O-rings that it comes... they were smaller than the originals, however, no leaks and so it must be all good. The plastic cap that comes with it is for capping the reservoir inlet while flushing the system. I will warn some DIY and newbies that it is a pain to remove the return hose from the reservoir without risk damage. If you are doing this in the cold seasons or if the hose is old and very stiff, you might consider having a new one and cutting off the old hose. In my case I vacuumed the old steering fluid out by running the engine a short while and pumping out the old fluid from the fill opening. In about five cycles the fluid looked nice and clean. Still no leaks. | 5 | Fits my 97 ZJ with non-proportional | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B000EVWDAK | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I can get readings and some of the extended readings seemed useful. The online stuff is not much use for me. The PC link usefulness is lost on me... where-what?It is way not as useful as a DRB3 would be... few things are. | 4 | Not as advanced as I hoped. | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B000HCRW84 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I was about to order them from Amazon, but they were on sale local.My old Jeep ZJ 97 was fitted with Autolite Copper core that were still looking like they could last a while longer as they appeared when I removed them, but I had decided to see if these Bosch +2s are better suited for the job better.After installation, the first thing I noticed is the idle was more smoother... I'm sure my injectors could use a cleaning as well as the IAC, still the plugs seem to help.Performance? Well...If one could really trust the MPG gauge on a ZJ, then the claimed +.7 MPG gain is nice. Really that said, it may be more a .1 miles per, however, the real time meter was observed to have better highs on straightaways... before was about 20-23 and now 21-25 on the same patch of road. Is this great or even real? Still the important thing is that in my Jeep ZJ is very happy with them. These are the same two prong versions pictured above.Also worth noting is that the Autolite plugs shown greater wear on the center electrode surface facing the outer electrode. So I would guess that most of the sparks were in that area or in other words the spark was cramped into the space between the two electrodes. The outer prongs were still in the stock position as a new one would appear, but this fact of the wear might be the reason for the right off improvement of the performance when I switched. | 4 | Just replaced my sparks early... | 1,388,793,600 | 01 4, 2014 |
A1DNXX5IDFFM4O | B000I1KJT8 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | When I first received the set, I checked them for finish and then I noticed that the ratchet are not all used. When closed they are short by one click. It seems that the specs for the handles must have changed I would think? I actually had a chance to used them just two weeks after purchase and it seemed I could have used that one more click to get my clamp as far as possible. I was still able to use what I had, but it was clear that the grip was a little loose. I suppose if I force them wider that I'll have that last click... although I should not have to do this. | 4 | They work, but maybe could be better? | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B000KYYFIY | Wah the Y Yee "MysteryOnion" | [
1,
1
] | Simply, I figure for the price that another fob #1 would be nice to have. I have yet to find a fob #2. | 4 | As a spare when I only have one. | 1,376,956,800 | 08 20, 2013 |
A1DNXX5IDFFM4O | B000MD4YWA | Wah the Y Yee "MysteryOnion" | [
0,
0
] | It was not the perfect fitting at first. The grease gun was missing the Zerk head, however, with a wrench on the adapter to take it apart and after was the proper fit to my gun. | 4 | This got me in that tight space | 1,395,619,200 | 03 24, 2014 |
A1DNXX5IDFFM4O | B000NPULEM | Wah the Y Yee "MysteryOnion" | [
0,
0
] | 300FtLb and the rust was coming up in clouds. The pretty black finish is a little worn from the first use, but the metal is still good. The bolt has spun off and the fit is still correct. It has met the challenge I put to it.... Happy. | 5 | Low money and puts a good beating on the bolt. | 1,361,577,600 | 02 23, 2013 |
A1DNXX5IDFFM4O | B000UBB7U6 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I almost returned the entire bunch. The Winco or the like in the Windsor pattern are not finished very well and some had rough enough edges that needed burnishing before use. | 3 | Spoons they are, but almost not. | 1,321,315,200 | 11 15, 2011 |
A1DNXX5IDFFM4O | B000UBE41K | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Like the spoons and dinner forks, this batch was not well finished. Most of them had rough edges and required burnishing before use. The polish on them was a little inconsistent as well. They are not top dollar and so I would say for the money and that they do fork stuff that I did get my moneys worth. | 3 | Less is still less and no more... | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B000UBG0K8 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Not that great in finish. Some are very rough and a few out of the two dozen required burnishing.The polish was usable as some shown missed spots. | 3 | Not as good as I first had in sets stamped from India | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B0015KUEBE | Wah the Y Yee "MysteryOnion" | [
0,
1
] | I have a ZJ 97 and the original hanger it came with was a 1/2" diameter type that runs in the front to back direction unlike an XJ that would run left to right. The tailpipe would be at an angled in proportion to the hanger and this Dynomax hanger is definitely the wrong one. Although this Dynomax hanger wrong, it was a good starting point for me top cut and fit to my ZJ model Jeep. For instance the Walker tailpipe is too small and it is the left to right direction. I did need a little help from my Dremel and metal saw as well as a MIG welder. The angle you are most likely to need is about a 20 to 30 degrees turn outward. Based on the hanger arm facing away from you and so you are looking at it from the front to back view and you are moving it to the right... I would advise you check this on the ZJ rather than take my word for it. | 4 | Not for ZJ 97 unless you are willing to modify | 1,395,878,400 | 03 27, 2014 |
A1DNXX5IDFFM4O | B001DI5U8A | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I've ordered k-f-s-ss and these. It was happy they seemed better finished than the bigger pieces. These come in handy for many occasions. | 4 | Compared to the others, not too bad | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B001ER6MZK | Wah the Y Yee "MysteryOnion" | [
0,
0
] | It puts ink to paper.No rub off issues.Clean and clear.Nice price for 3.However... Only 2 out of 3 worked the 3rd was streaky. | 4 | Good enough for most to all printing... | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B001FC7ABY | Wah the Y Yee "MysteryOnion" | [
0,
0
] | If you are not aware... this is a new version of a favorite.Slippery and fine. I've had no issues with it in fine mechanical mechanisms, but would not use it in some ultra fine balanced mechanisms. It clings well where I put it and seems stable in most temperatures within normal ranges. Ultra low viscosity and yet keeps tight surfaces sliding well. | 5 | This is the stuff... new stuff... | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B001PYLFDG | Wah the Y Yee "MysteryOnion" | [
0,
0
] | This is handy to have from my filthy e-brake innards. all the key parts for both sides. It is too bad the kit does not cover the rubber boots and armatures for the brake itself. Still, this does the job. | 5 | Good start to cleaning up the e-brake | 1,404,518,400 | 07 5, 2014 |
A1DNXX5IDFFM4O | B001WRP4WE | Wah the Y Yee "MysteryOnion" | [
9,
10
] | A great film... however, in a few situation of diminishing light (dusk), overexposure is a good insurance policy. I should have been aware that the light was fast moving way off the mark and unlike other films, over compensation would have been best... my fault more than the film. That was just a few shots out of bunches more that were great. Sharpness... lets be real... Tons of sharpness and detail! There has been many discussions in film forums about "pink or purple cast shadows", but I found a few situations were my FILM SCANNER was not dealing with the film well. Minor adjustments seemed to fix this. I'll be stocking up on this stuff again soon. | 4 | It shoots almost like slide film | 1,257,984,000 | 11 12, 2009 |
A1DNXX5IDFFM4O | B002GQ3LFM | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I used it and it had no problems with the force I used to remove a bolt, but the whole job could not be done with just this product. I had to grab a u-joint bit to give the ratchet enough clearance through the tight space and 35 degree path. | 4 | strong enough but not flexible enough... | 1,403,222,400 | 06 20, 2014 |
A1DNXX5IDFFM4O | B002ISQE2U | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Metal body... great! Suction... fine, could have been better.So you may want to try this... get some nylon or poly hose about 1/2" and enough to do the circumference of the base of the metal cup part. Cut a slit in the hose and fit it to the edge of the base to raise the depth up some more. I figure it went from about 35lb to about 50lb from this trick. | 4 | Does it suck or did it suck or could it suck more? | 1,385,078,400 | 11 22, 2013 |
A1DNXX5IDFFM4O | B002UKPUNK | Wah the Y Yee "MysteryOnion" | [
0,
0
] | It had been pointed out that there are better covers and it may not say Brinkmann on it, but it will do a better job than this light weight cover. A premium cover starts at about $35 and if the sun, wind, and cold is heavy as in my situation... the $35+ cover is as dead as the $25 cover.I've tried the cloth and trash bag and big table cloth... all poor in use.So far the 65 inch cover fits and is easy to use and has not, has not left with the wind or started to shred either. The sun has yet to be high enough to burn it yet... we will see.Update: A year and rough weather... Two winters... Some cracking at the edges and fading of the color, but still shielding the Char-cooker from the elements. | 4 | Covers well and ... well, it covers. | 1,361,577,600 | 02 23, 2013 |
A1DNXX5IDFFM4O | B002VWK5R8 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Great price for a bare tool as I have the batteries.Out of the 20 Lug Bolt on the car, 11 were rusted and over torqued to greater than the listed 85ft lb. Wow! It got them off!Note that a freshly recharged battery will give greater power than with a weaker or heavily used pack.Example... I have an old pack that only carries about 17.2v when fully charged and it had trouble removing a lug set to 150ft-lb.Example... A new but low in power pack at 17.8v struggled a little and still managed to spin off the test lug.Example... New and freshly charged and reading 19.14v (18.4v working), had not trouble at all and when torqued back on, it was very much over the 150ft-lb max of the torque wrench settings.I would say that the common complaint of the detent pin being difficult to use is quite true. I have been able, however, to wiggle off the socket without poking the detent. Pin facing up and grabbing the socket and angling it down first then wiggle and progressively pull the socket and almost walking it off... also just as easy to poke it off. | 5 | Wow... Refurbished? | 1,361,577,600 | 02 23, 2013 |
A1DNXX5IDFFM4O | B00390BS7C | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Feels of good quality.Did not fold at the task.As attached to a 1/2 inch adapter and perched on my breaker bar.It coax my O2 sensor off.It seemed to laugh.It works, not a problem. | 5 | Ode to a O2 puller | 1,385,942,400 | 12 2, 2013 |
A1DNXX5IDFFM4O | B003MP8MGY | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I installed it in a bike lamp and it works well. It is seemingly as bright as the Krypton bulb it replaced... that is a well used bulb. The white light that it produces is very comfortable to see and helps to pick out details. The run time with it was far better than the standard bulb. I estimate I get about near 2 hours total run time compared to the 20 minutes. | 4 | Very good amount of light. | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B004IC0F5Q | Wah the Y Yee "MysteryOnion" | [
0,
0
] | There are many of these little gadgets at differing prices and specs. The first one I spotted was in the Harb**-Fr*ght catalog and it look OK then with a nice heavy base. This one I picked up from Amazon looked much like it and seem to be with the same style heavy cast looking base...Nope, it is the stamped style, still it handled my Jeep tires well... 15" and 16" and certainly, when bolt properly as the instructions say, it did a fine job. Only time will tell if it lasts the next four sets of tires I have planned to do. Also, this came with a Har...Fr...t instruction sheet.Important ingredient is a tire lube. Not WD40 or grease, only a tire compatible lube. You'll need it to remove and install.So how about putting the tire on? Well, I did find that the different shaped ends of the long handle/pry bar are not all useful. I found the long straight end was the most useful, but the shoulder end should face the bead. The stock finish is not helpful as it sheds during installation a could contaminate the bead from properly sealing. I've since buffed all of the paint off and highly polished it to ease the coaxing of the bead on.A helpful item to also assist in mounting is a smooth long rod about 1/4" by around 14".The rod is used to put the first bit of the bead on the rim and help hold it in place. It is also helpful to pull off the rim. Caution, while lifting or holding the bead, be careful that it not turn into a projectile if you slip.Also helpful is a wooden block about 2 inches wide and thick enough to keep the bead in the narrow of the rim allow the slipping of the bead... about 1 1/4 inches. Length that I use is about 6 inches and it works great with a simple wide wood clamp.You would wedge it in between the rim and the tire bead while installing. This worked with 15", 16" and 17" rims.Update: I found that it had a difficult time peeling the tires off an OEM Kia Sonata alloy. The flat bar stock of the bead breaker started to bend. I was able to complete the task of peeling all four tires. | 4 | Strong right now... not sure about later. | 1,376,092,800 | 08 10, 2013 |
A1DNXX5IDFFM4O | B004JCCLSO | Wah the Y Yee "MysteryOnion" | [
0,
0
] | A very good HDTV and a flimsy remote.Marks wear off after a few months, stepped on it and snapped it, buttons start to fail. | 4 | Needed it and may need another one | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B004QO9BMY | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I got this for my wrestling match with Jeep control arms. That little extra length does help. The funny plus is the high polish finish which at first I didn't like, but when it came time to red neck position the axles via a web cargo strap and then torque things. This polished surface was nice in tight places. Threading the wrench through the web and twisting to tighten, I was able to slide the wrench back and forth to clear the tight space. Even as the web got tighter, I was able to move the wrench. After the installation, the wrench shown little signs of trauma from the project. | 5 | The wrench that shines. | 1,385,078,400 | 11 22, 2013 |
A1DNXX5IDFFM4O | B0052OY0FK | Wah the Y Yee "MysteryOnion" | [
0,
0
] | My daughter was very pleased with this case... actually a cover. It did not interfere with the operation of the phone and the important connection were still accessible. | 5 | It fit the phone and looked good | 1,395,619,200 | 03 24, 2014 |
A1DNXX5IDFFM4O | B005FQI6VE | Wah the Y Yee "MysteryOnion" | [
0,
0
] | I figured it to be on the thin side for material, however, I've now crawled around my vehicle for a dozen times and it has held up well. | 4 | Sturdy and it is very summer weight... | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B005KOKFR4 | Wah the Y Yee "MysteryOnion" | [
1,
1
] | Firstly... this is not as stable as a shop stand with a plate bottom. Still it is very stable for a folding stand. I have minor issues with some points, but can't emphasize enough that this is a great, easy to carry repair stand.Starting with the clamp... strong and tight on tubes greater than 1.50 inch. However, gripping seat tubes or vertical position is not always sure. The ability to rotate the grip take some getting used to... before using it on a bike, take the time to study how it works and you'll avoid frustrations while setting up a bike on it.The stand sits well and is very stable and you can adjust the angle of the post in increase stability in some situations, however, the tool tray will not be as useful when tilted. I've used it in its fully upright and stand with tool tray.The legs lock well and didn't slip while working on bikes and folding up the stand is easy enough, however, don't fold by pushing on the main post... unlock clamp, slide clamp up and when the legs are half way up, press them together while bringing them closer to the post. This will avoid damage to the joints and clamp and you'll have a longer lasting stand. | 5 | Great stand. | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B005O658C0 | Wah the Y Yee "MysteryOnion" | [
0,
1
] | A good set for a beginner...Torque on the impact wrench is good for all but the really tough and rusty 20mm bolts. You do need some high cubic-feet-minute numbers to get the most out of this set.Ratchet is good and handles well and I had a set of deep sockets that made things work out well. The included socket are fine in a general sense, but a wobbler set or u-joint set will make things better.Hammer... well it is ok. I didn't find it up for the challenge of pounding out an old bushing. Lots of air just goes through and out with little progress... using a chisel or point tool.I am running on a 21gal./2.5HP in 90psi @ 4.7CFM and so I'm near 90% capacity for the tools in limited run time? I should consider ganging up some tanks to maybe get more out of this. | 4 | The nuts and bolts of it are good, but the deep down torque is not there. | 1,385,078,400 | 11 22, 2013 |
A1DNXX5IDFFM4O | B00667ATKW | Wah the Y Yee "MysteryOnion" | [
5,
6
] | First, I purchased this in anger. The tire shop hosed me on a deal for a set of tires, the claimed price was supposedly guaranteed...long story short was that I had very bad originals and needed to pass inspection. So they knew I was stuck and I knew I was out of time.Future plans for a needed set of winter tires, but I vowed not to pay an extra two hundred more again... sure most folk say that "all season" is all you need. Yes, I'm the type that prefers "Ice tires" over all-seasons for winter.I poked around the inter-web for info, I found bunches of recommendations of the joys of DIY-ing my own set with the above device. If you think it is better to leave it to the professionals and to pay the extra $$$ than worry about the safety of home built tires, then why are you reading up on this product? Read to the end before you feel you have to comment... Also, spare me your negative comments about my choice.Oh... so the results... up to 50MPH on the winter set with no issues... why not faster? I've not had the chance as these are winter tires are mostly around town driving and on an old SUV. Can it work for highway use? I am almost sure... when I have the need... soon? For sure... if you are careful in where and how you set it up, observe carefully the centering of the bubble and be consistent with procedures to test the balance, this thing can detect a change of 1/4oz or 7 grams easily. I had been able to practice on a spare tire prior to doing the real build, noting original weight positions prior to knocking off weights and re-balancing with stick-on type weights. If you have doubts about your accuracy, this is a valuable thing to try first. This spare was tested to 62mph on a old jeep and seemed to be good! I took this lesson to building the real set of tires for my wife's VW New Beetle and General Altimax Arctics (as of this writing, beetle dead in driveway with tranny issue prior to testing...bummer) and followed by an Altimax set for my Jeep which we did go up to about 50mph with no noticeable issues.Tips:1. As per advice by someone on internet, locate the weights as centered as possible on rim to avoid "Dynamic Imbalance" conditions. Finding the center is usually by measuring from front to back and divide for the middle.2. Also, always keep the center pivot point of the balance well oiled up with oil not grease. It reduces false readings due to minute friction.3. Prior to actually putting weights on. Test for where a tire is out of balance at one place and then reposition the tire 90 or so degrees on the balancer and see if the imbalance follows the tire or stays in the same place or is in a very different place. Other than following the tire will mean that the balancer is not set up correctly on a level place or the spindle is loose and wobbling... had that happen to me a few times.4. Never spin the head piece with tire on it or you will cause premature wear to pivot, instead, carefully lift tire up and carefully re-seat.5. Also, always re-measure the tire from two or three position once the weight is temporarily attached (a little blue painters tape is what I use). In other words, make your balance, lift out tire and turn 90 degree, carefully re-seat tire and check that the tire is still reading correct, tack some weights on, is it still correct, new balance consistent, if good then affix weights, if not move around until consistent, now all done.I've taken the time as stated above and got it all spot on for three turns on all four tires... sure this is taking longer than if I had gone to a tire shop, but I save about $112 not including tax for the entire set... I paid $342 delivered for the tire carcasses.Oh, so to date is three sets built and so far so good.UPDATE: 67 MPH and no issues.UPDATE: Made a set for my brother and took my time checking the balances and his set has gone up to 70+MPH with no issues! | 5 | This thing works! | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B006YHKR88 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | So far so good. I've run the 1/2 to 3/8 up to about 270ft.lb. and it didn't snap. Have not yet tried the others yet. | 5 | Good impact. | 1,385,942,400 | 12 2, 2013 |
A1DNXX5IDFFM4O | B007DK6SG0 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | This is the closest we ever found. The metal is soft and so the handles may bend out, but the overall alignment of the blade and tractor gear does the job with minimal metal shards compared to the "Made in China" so called original that could not open 7 out of 8 cans we tried. | 5 | Not 100% like the one I grew up opening cans with... more like 96% | 1,361,577,600 | 02 23, 2013 |
A1DNXX5IDFFM4O | B007VR8BXS | Wah the Y Yee "MysteryOnion" | [
0,
0
] | They do the job.However, if you are a knit picker about placement like me, get yourself a roll of "Double Sided Molding Attachment Foam Tape" to reposition the weights. I didn't plan ahead and set up my balancing rig wrong and had to knock off all my weights and start over when the tires failed my double check. | 4 | I like the convience of these stick-on weights | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B007X2ATZE | Wah the Y Yee "MysteryOnion" | [
0,
0
] | This is a nice tool and heats up fast and seems to hold the temp well. To bad it is not safe for food prep. | 5 | No heat from me... it works! | 1,385,078,400 | 11 22, 2013 |
A1DNXX5IDFFM4O | B0099W8EXU | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Bright is right... however, it is not brighter necessarily. Comparing the output of this 36LED model a 200 lumen output... to what I was looking to replace, a 13.3 watt and 188 lumen bulb. The incandescent seems brighter or at least it is able to reach further in the darkness. If you ask be which one I would prefer, I would point at the LED. It is a white light and it make many things stand out and colors are more clearer. In the applications that I'm using it for, it is my under the hood lamp of my Jeep. Fumbling around for a fuse, it is more easier to pick out issues.If I need more reach, I might look for a 300 lumen maybe? | 4 | I don't see further than clearer... | 1,391,385,600 | 02 3, 2014 |
A1DNXX5IDFFM4O | B009YP1K7Y | Wah the Y Yee "MysteryOnion" | [
3,
3
] | First, if you need a cushion for heavy items and you have a strap of 1.25" to 1.5" then you are going to get good performance. I primarily have a strap that is 1" and it is for a 7 pound camera which necessitated the flipping of the pad upside-down and putting the strap between the two velcro parts. This allows the stiff velcro and the thin cushion center to make a properly performing pad. So mostly, all is good in the cushioning department... long term is the question. When I opened the package I was hit with the smell of strong petroleum fumes... sort of reminds me of certain gel compounds from chemical reactions. I left it out in a high ventilation area for over a week and it still smells as strong or maybe stronger? I am not sure what will happen over time when sweat and sunlight gets it, will over time it will leach anything or cause a rash or something? Maybe my items are the exception? | 3 | Although they do work, however, with some concern. | 1,396,742,400 | 04 6, 2014 |
A1DNXX5IDFFM4O | B00A740VQM | Wah the Y Yee "MysteryOnion" | [
0,
0
] | First off, the bits are a good spread of types and sizes that I will have much use for... can't speak for the hardness of the bits, but so far they have held up to things I've used.... tech stuff. The flex shaft is also a great item, it seems to be a cable like insides with a soft flexible cover and with free spinning sleeves. The main handle seems sturdy enough with a non-slip texture, however, I would avoid putting more than 250 inch/lb of pressure on it as it may tear the chuck from the handle. The chuck is also a minor dislike for me as it is a simple shallow knurled finish making it difficult in applying enough torque to lock it. If you intend to use it with force to push down on the screw, don't be lazy about slipping the extension piece in the handle and sliding it to the minimum length then attaching the bit. A few times I had grabbed the handle then bit only and locked it into place. I then had the bit slide in on me while working... you may think it is logical that you put the extension in first, but in a hurry or laziness you would skip it. I almost scuffed up a phone with my laziness.So all in all... a nice kit. The other versions you may find will have the tweezers in place of the flex piece or in some kits you will see all parts. I have tweezers so this kit fits my needs. | 4 | Very nice kit and mostly sturdy. | 1,393,286,400 | 02 25, 2014 |
A1DNXX5IDFFM4O | B00B2FCAXW | Wah the Y Yee "MysteryOnion" | [
11,
11
] | I'm sure others have their curse moments while changing a tire. My experience is with Chrysler/Jeep OEM lug nuts and after three years of service, the first three or so nuts refused to allow the socket wrench to fit. By the next year was when almost half the remain nut rotted and require cutting jackets off or separated from the core nut. These White Knight nuts stood out when I could see that in images that the metal jacket wraps around the chamfer base. A full metal jacket nut! My attitude of replacing a few at a time was changed with the hopes that this might mean a longer time before needing to swap out the nuts. The fit is identical to the OEM nut and spun into place smoothly.Update: Chrome is coming off in some spots... due to salt? I am a little disappointed... just happened to look at them while shoveling snow from around my Jeep during a big snow storm today. That is one less star (four stars) and I'll remove another if they start to rust like crazy.UPDATE: Someone asked in detail about compatibility to rims... these are Conical and 60 degrees. Some alloys may be flat and some may require 90 degree conical. Check out the White Knight web site.UPDATE: Heavy salting from recent storm and they are now very tarnished. Very sad that they are look worse in about a month of bad weather. Looks like they are not going to last a year at this rate.UPDATE: The set is looking very sad after another snow and salting. I've removed another star. At this rate, the set will need to be replaced after this winter... April or May 2014. | 2 | Quest for non-bloating Bulge Acorns | 1,376,092,800 | 08 10, 2013 |
A1DNXX5IDFFM4O | B00CMKS2DI | Wah the Y Yee "MysteryOnion" | [
1,
3
] | At first it was a good sounding idea to have a dual slot reader. I did use it once and had no noticeable issues and it copied from one SD to another. It lived in my backpack and was not abused. A few weeks later, I slipped it out to use again and got nothing. The little blue light did not come on nor did the cpu act as if it wanted to mount the device. The wire looks normal and the body look still new. This is currently garbage. | 1 | One use and it is now very dead. | 1,399,420,800 | 05 7, 2014 |
A1DNXX5IDFFM4O | B00DC87F96 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Look great and fits with no issues. Installed with ease and seals properly.Avoid using the technique of pulling through by the threaded end and cap. If you have an installing tool, it is the best method. If you must fudge one into the rim, try a long thin finishing nail. The head should just be big enough to hold and not pull through and with a vice-lock balance on the rim outer edge, hoist away... oh lube the valve and not with wd40. I have bead lube for installing tires on to rims and it work well. | 5 | It fits and does not leak | 1,390,262,400 | 01 21, 2014 |
A1DNXX5IDFFM4O | B00F14R8CS | Wah the Y Yee "MysteryOnion" | [
0,
0
] | These are very cute mittens and if the description had been clearer, I might have saved some money and not purchased them. Prior to ordering, the item did not have any indication of size only the "Womens" size. Definitely cute for children. | 3 | Didn't see the size prior? | 1,388,620,800 | 01 2, 2014 |
A1DNXX5IDFFM4O | B00FOS7IJO | Wah the Y Yee "MysteryOnion" | [
0,
0
] | Have you tried using the 18V flex light with the original standard bulb? First it is bright...ish then about twenty minutes later it is not so bright and soon it is orange bright. It is a waste of batter power. I popped this LED in and it worked great and importantly is that the operating range is 7-30 volts as so I've plugged my less than stellar old 18V pack in and they keep it bright for about an hour with no trouble... have not left it on for more yet. The old batteries are around the 12-13 volt range when charged. The light is not as wide, but bright enough that the spill over is very usable. | 5 | OK, now I can work and see... | 1,403,222,400 | 06 20, 2014 |
A1DNXX5IDFFM4O | B00G5RXM16 | Wah the Y Yee "MysteryOnion" | [
0,
0
] | This is installed on the top floor of our home and a simple antenna was fashioned to pull in the local channels. It looks stable and the handful of computer monitors that I've tested it with are fine just a little fuzzy in quality. | 4 | This thing is working... | 1,401,408,000 | 05 30, 2014 |
A1DNXXFPGF5EVG | B0011Z310Y | Sully | [
0,
3
] | Down load failed and now I am paying for a song I don't have. Down load failed for three other songs as well. | 1 | Josh Groban, You Raise Me Up | 1,318,377,600 | 10 12, 2011 |
A1DNXXPCIHQHCX | B00001R3QY | Brandy "Zacks mommy" | [
5,
5
] | I bought this about a year ago, I only have 1 child who is now 4 years old. When we use it as a jogger, it is extremely hard to make turns in, but I knew it would be before I bought it because I was aware of the "jogger" stroller structures. Most joggers have non-swivle front wheels. But I think with something as big as this trailer it should have a swivle wheel in front. As a bike trailer, I have found no complaints! WORKS GREAT! As for other complaints about tires warping and air deflation, maybe your kid or kids are too big for it, that could be causing the problems. My son is 4 and weighs 40pounds, works fine. I only paid $100 for mine brand new! You cant beat it for that price!!! Son loves it, I enjoy using it and spending quality time with my son while getting the exercise I need! | 3 | GOOD TRAILER - BAD JOGGER!!!! | 1,117,065,600 | 05 26, 2005 |
A1DNXXPCIHQHCX | B000096QLU | Brandy "Zacks mommy" | [
6,
6
] | My husband and I purchased this bike when my son was 2 years old. He is now 4 years old and STILL LOVES IT!!!! When he was 2, he just used his feet instead of the peddles, but now that he is 4 years old, he really knows how to make it go! The bike has held up extremely well for as much as he has played with it. Except for some stickers that he pulled off, it still looks new! I do have to say that it is very loud though. Make sure it is for outside only. 2 Thumbs up for this one!!!! | 5 | GREAT TOY TO GROW INTO!!!!! | 1,117,065,600 | 05 26, 2005 |
A1DNXXTEP168GT | 0615647235 | Special K | [
1,
2
] | I just finished this book. I could hardly put it down. The author did a great job incorporating Christian values and a love story. I don't usually read this genre but, I am glad I did. I will read more of her books in the very near future! | 5 | Impressive | 1,336,176,000 | 05 5, 2012 |
A1DNXXTEP168GT | 1419960237 | Special K | [
0,
0
] | This book had a nice mix of action and romance. I always like reading a book where the girl is not a wimp. :) | 5 | More please | 1,337,558,400 | 05 21, 2012 |
A1DNXXTEP168GT | 143279146X | Special K | [
0,
0
] | This book reminds us that it doesn't matter where you are, you are loved. The words touched my heart. Not only is the book well written, the illustrations are wonderful. I love the furry purple bunny. | 5 | Young or old, this book is wonderful. | 1,352,073,600 | 11 5, 2012 |
A1DNXXTEP168GT | B007M7DTAM | Special K | [
2,
2
] | LOVE This case. It fit perfect. Didn't make the phone bulky. I would recommend this to all my friends (if they had this phone). :) | 5 | Buy it! | 1,384,300,800 | 11 13, 2013 |
A1DNXXTEP168GT | B00BHEN3OS | Special K | [
2,
2
] | I was able to try Bob's on in a store. They didn't have the pattern I wanted so I ordered from Amazon. I was happy that I tried on in the store because I knew to order a 1/2 size bigger than I normally wear. I love them no matter the size. :) | 5 | LOVE!! | 1,384,300,800 | 11 13, 2013 |
A1DNXYM9WN1H6 | 0764162659 | Curly haired one | [
3,
3
] | this is totally worth it since i have no time to write flashcards. it literally covers everything even the same examples form the book i use as if it was written specifically for my book though im sure its not. Honestly, if you are in AP bio, whether you have an A in the class or an F, buy this you wont regret it! | 5 | Worth it | 1,355,011,200 | 12 9, 2012 |
A1DNXYM9WN1H6 | B005N4QHEG | Curly haired one | [
0,
0
] | the color is a little different and it came with black marks at the bottom so it looked used. Personally I still use it, like it's not terrible, it's fine, but if I needed another case, I wouldn't buy this. | 3 | Cheap | 1,355,011,200 | 12 9, 2012 |
A1DNXYXDYMAKGM | 085345308X | Mario Tarjan | [
4,
4
] | This is a MANDATED reading for all USA Citizens if they have an open mind and wich to expand on their horizon regarding the truth about what is really happening and has happened in Latin America and why it is different from the US.Eduardo Galeano is equivalent to Noam ChomskyActually can be reagarded as the Noam Chomsky of Latin AmericaThe Book is somewhat old because its last printing is in 1964. Galeano has since printed more actual essays and a new or an Update is overdue. | 5 | Galeano is the Noam Chomsky of Latin America | 1,295,049,600 | 01 15, 2011 |
A1DNXYXDYMAKGM | B001AGF9N6 | Mario Tarjan | [
1,
3
] | This product Bushnell Laser Boresighter came in Dead on Arrival.Bad quality very flimsy design particularly the on off switch.What looked like a simple gadget proved to be a bad design and the poorest quality control from the manufacturer.The tiny very flimsy switch was left in the on positon (probably) and the laser diode NEVER turned on.Never in my life another Bushnell Product!!!! | 1 | Worse product I have ever purchased via E-Mail | 1,286,323,200 | 10 6, 2010 |
A1DNXZ2GQFAKX8 | 0891348778 | M. Merchant | [
0,
0
] | I ( a novice in watercolor) purchased this text when a friend and fellow artist( accomplished) were discussing smooth washes during a plein air watercolor excursion. In fact this text has that and more, palette, color, glazes, washes, etc. it's all there. | 5 | glazing and washes | 1,299,801,600 | 03 11, 2011 |
A1DNXZ2GQFAKX8 | B000MX48VM | M. Merchant | [
0,
0
] | This was purchased for an avid amateur to add capacity beyond the card that came with the camera. It did the trick and meant more photos before the need to review and delete or download to create space. | 5 | Kingston 16 GB flash memory card | 1,236,816,000 | 03 12, 2009 |
A1DNXZ7YOXFV0J | B008EQ1ZAG | John M. Kyles, Jr. | [
1,
2
] | I owned these for about a year and they were great. Recently, the left earphone stopped working completely. I contacted customer services and was told there were none available to replace my pair. That's funny, I can find them online and in plenty of stores this time of year. Buyer beware. | 2 | Good....while they worked | 1,385,942,400 | 12 2, 2013 |
A1DNXZBK1TBQC7 | B005KH44GE | Lena | [
0,
0
] | First of all I'd like to say, I ordered on July 1st and received these on July 3rd. When I saw them I loved them from the start, the colors were just what I wanted.When I put them on they were comfy. They dont hurt my feet at all, Im quite impressed. Im now waiting for my pink ones :) | 5 | Couldnt be happier | 1,404,604,800 | 07 6, 2014 |
A1DNXZI3K94CHU | B002OAU30G | E. Chavez | [
0,
0
] | I really like this knife, it came really sharp right out of the box. I bought my dad the same one because he liked mine so much. | 5 | Solid product | 1,392,508,800 | 02 16, 2014 |
A1DNXZJD1CPUAG | B000C36BPS | null | [
0,
0
] | Excellent! | 5 | excellent! | 1,405,209,600 | 07 13, 2014 |
A1DNXZJD1CPUAG | B006FF6HRE | Rene C. | [
0,
0
] | Excellent!! | 5 | Five Stars | 1,405,209,600 | 07 13, 2014 |
A1DNXZJD1CPUAG | B0090X5VVQ | Rene C. | [
0,
0
] | Great! | 5 | Five Stars | 1,405,209,600 | 07 13, 2014 |
A1DNXZJD1CPUAG | B009IZYS4W | Rene C. | [
0,
0
] | Excellent | 5 | Five Stars | 1,405,209,600 | 07 13, 2014 |
A1DNXZJD1CPUAG | B00DC7G2W8 | Rene C. | [
0,
0
] | Super fun!! | 5 | Five Stars | 1,405,209,600 | 07 13, 2014 |
A1DNXZOIDAE8HE | B001TOD5OE | MEDermis Tatt Removal | [
0,
0
] | I read the bad reviews before I purchased this product and thought I would take a risk and try them out. Maybe everyone else just had bad luck. Well, sure enough, these speakers only worked for a few hours and that was it. I have already returned them asking for my money back.I found a pair of Sony S-Air speakers...and they are awesome! That is what I would recommend. | 1 | Don't Purchase | 1,317,081,600 | 09 27, 2011 |
A1DNXZP8N3PV66 | B000AOMA68 | Cindy Backstein | [
1,
1
] | I love the way it drains into it's own storage container but they really need to make the wattage much higher on their burner.It never heats to 370 (even though it's own thermostat is thinking it does) and it takes too long to recover when you put in frozen food. I've measured this with two different thermometers. Both of them agree with each other so the fryer thermostat is poorly constructed. Plus you can tell by watching how little the oil bubbles when you try and fry the food to know the temperature isn't as high as it needs to be to quick fry the food to seal the outside so it doesn't get greasy.But there is no other fryer on the market that has a built in filter system that is easy to use. So we resigned ourselves to just frying precooked food like french fries, chicken nuggets, precooked chicken strips, mini corn dogs, onion rings, etc. If we try to cook raw breaded chicken strips then the inside is still raw even when you leave it in long enough to burn the outside.I love that you can wash the lid and the basket in the dishwasher but have learned not to put the big oil pot in the dishwasher because it doesn't really get it as clean as handwashing. PLUS if you put it in the dishwasher you risk having a crumb get stuck in the drain plug, which causes it to not close fully, which causes oil to leak out all over the counter when you refill it. If you hand wash it you can check to make sure water isn't leaking when you rinse, and if water doesn't leak then your oil will be safe too.T-FALL are you listening??? Put a stronger burner in your system, increase that wattage to 1800 or higher!!! | 3 | Does not heat to 370 degrees | 1,340,496,000 | 06 24, 2012 |
A1DNXZP8N3PV66 | B003A71XKQ | Cindy Backstein | [
0,
0
] | I had ordered this as part of a set with UnitedIntegral...one double ear headset and one single ear headset. The set together was $6.39 with $2.95 shipping for a total of $9.34.FIRST LIE: They said they ship in 1 to 2 business days. Seven days later they still had not shipped and would not switch to expedited shipping to get it here on time. Refused to do shipping for free to compensate.SECOND LIE:Lied and said they do not charge shipping anyway. Clicked on the link in my order and it goes to the item for sale, only now they have raised the price $2 and was still charging shipping on top of that.THIRD LIE:when questioned why the price is higher, they said Amazon raised the price. Checked with Amazon, they do not raise the price a seller is charging, only the seller can do that.FOURTH LIE:they got snotty with me about the lies I was catching them in and 7 days after I ordered they are now saying the product is out of stock. But again when questioned, about why the link in my order email goes to their higher priced sell, the item still says in stock, they got even snottier and canceled my order so that I could not leave feedback through my order.FIFTH LIE:they try and fool people by changing the name they sell under. While my order said UnitedIntegral, the link in my order, that went to the higher price for the exact same things, now said they are digisearchs.WARNING: DO NOT BUY FROM THIS BUYER! They do not ship promptly. Look for other buyers with the same issue. Some buyers still do not have their product after 1 month. Many say they only ship item in a plastic bag and the item arrives broken. And then UnitedIntegral wants the buyer to pay to return it. THEY ARE NOT AN HONEST SELLER!!!!! | 1 | UnitedIntegral is a scam seller | 1,363,564,800 | 03 18, 2013 |
A1DNXZP8N3PV66 | B003GDHI12 | Cindy Backstein | [
8,
12
] | We got this TV for a great price the day after Thanksgiving but have had nothing but problems ever since. I am now on my second TV and it didn't even last 10 minutes.From day one on the original TV the picture would freeze up within a few seconds after turning on the TV. During that time you could not do anything with the TV. After 1 1/2 minutes the TV would shut itself off for about 1 1/2 minutes then turn itself back on and things would be fine until the next time you turn the TV on and the whole freeze up thing would happen again. After many calls to Vizio (at least 1 hour each call) Vizio finally acknowledged they couldn't figure out why this was happening and they would send someone out to repair it.So we just lived with it this way until the repair person could come. They came out 3 weeks ago and put in a new motherboard. I set the TV and the DVD recorder and VCR up (for like the 10th time now) and was happy to have a working TV. But 4 hours later when I went to shut the TV off, it would not shut off and stay off. Within seconds of turning it off it would turn itself back on. More hours on the phone with Vizio.So Vizio agreed this one must be lemon and they would replace it BUT IT TAKES 3 WEEKS FOR THE REPLACEMENT TO BE DELIVERED!So for 3 weeks we unplugged our TV every time just to shut it off.The new replacement came today and within seconds of getting things hooked up and trying to set it up the video picture would blink on and off. By the time it made it through setup and I actually got a TV show on the screen, the picture went black for the last time and never came back on.Another hour or longer on the phone with Vizio and they can't figure out what to do so they will send a repair person out...NEXT FRIDAY... A WHOLE WEEK AWAY! So now I sit here with NO television for a week and Vizio could care less.I'd take it back and get my money back but the Christmas sales are all over with and this puppy is hung on my wall. What a pain to try and find an equivalent feature TV for an after Thanksgiving price to put in its place.STAY AWAY FROM VIZIO IF YOU EXPECT GOOD QUALITY AND GOOD CUSTOMER SERVICE. | 1 | Stay away from Vizio - Terrible TV and terrible service | 1,296,172,800 | 01 28, 2011 |
A1DNXZP8N3PV66 | B004AVIQL0 | Cindy Backstein | [
2,
8
] | There is NO dial to turn to filter the oil and there is NO slide out container for the oil to filter itself into.You CANNOT raise and lower the basket with the lid on as the basket hooks to drain the food only attaches over the top of the oil container and this would allow the oil to drip off the hooks onto the counter top.NONE OF THE DESCRIPTION IS TRUE!!!Who do I call to talk about these issues with? I still want the deep fryer that is described for the price that was listed...NOT SOME SUBSTITUTE!!! | 1 | description is NOT accurate | 1,332,288,000 | 03 21, 2012 |
A1DNXZP8N3PV66 | B004E0G862 | Cindy Backstein | [
50,
58
] | I had ordered this as part of a set with UnitedIntegral...one double ear headset and one single ear headset. The set together was $6.39 with $2.95 shipping for a total of $9.34.FIRST LIE: They said they ship in 1 to 2 business days. Seven days later they still had not shipped and would not switch to expedited shipping to get it here on time. Refused to do shipping for free to compensate.SECOND LIE:Lied and said they do not charge shipping anyway. Clicked on the link in my order and it goes to the item for sale, only now they have raised the price $2 and was still charging shipping on top of that.THIRD LIE:when questioned why the price is higher, they said Amazon raised the price. Checked with Amazon, they do not raise the price a seller is charging, only the seller can do that.FOURTH LIE:they got snotty with me about the lies I was catching them in and 7 days after I ordered they are now saying the product is out of stock. But again when questioned, about why the link in my order email goes to their higher priced sell, the item still says in stock, they got even snottier and canceled my order so that I could not leave feedback through my order.FIFTH LIE:they try and fool people by changing the name they sell under. While my order said UnitedIntegral, the link in my order, that went to the higher price for the exact same things, now said they are digisearchs. Why are they selling with a new name? And this came directly from the link in my order.WARNING: DO NOT BUY FROM THIS BUYER! They do not ship promptly. Look for other buyers with the same issue. Some buyers still do not have their product after 1 month. Many say they only ship item in a plastic bag and the item arrives broken. And then UnitedIntegral wants the buyer to pay to return it. THEY ARE NOT AN HONEST SELLER!!! | 1 | UnitedIntegral is a SCAM seller | 1,363,564,800 | 03 18, 2013 |
A1DNXZP8N3PV66 | B006JH6AE8 | Cindy Backstein | [
2,
2
] | Decent headset for the price. Arrived in promised time. My son is able to talk with his friends on xbox and play the games. Was worried about what might come after being tricked into ordering one from another seller on Amazon for a lower price (they were baiting buyers with a low price and then not shipping and then claiming a week later they were out of stock even though they were also selling them under another seller name for a higher price.) This head set seller had good communication and made the delivery very close to the promised time. My son says they fit on his head just fine. | 5 | works like advertised | 1,366,588,800 | 04 22, 2013 |
A1DNY03CCN9C3H | B004HX3COW | Melanie Penkava | [
0,
0
] | I like the screen protection, but it sometimes has fingerprints or smudges everywhere, which I don't care for. But it gets the job done. | 4 | Does the job | 1,355,011,200 | 12 9, 2012 |
A1DNY03CCN9C3H | B00EV18U4C | Melanie Penkava | [
0,
0
] | Shipped fast, item as described. Would buy from again. Only gave it a 4 because my cat lost it, he kicked it off. Not super loose break away though, he worked at it a while before actually getting it off. | 4 | 4/5 | 1,381,622,400 | 10 13, 2013 |
A1DNY0CW9XJL6D | B0035GWHKC | Carol Jones | [
0,
0
] | No problems with this device and was sent promptly. No complaints. However I am disappointed that I had to replace in the first place. | 5 | Works just fine | 1,355,097,600 | 12 10, 2012 |
A1DNY0KUX9J8JC | B004FYEZMQ | Ombranox | [
0,
9
] | This game was amazing. The environments were great, the combat actually got better, multiplayer didn't suck. My only grievance was the ending. If one was to purchase the game, they would never stop enjoying it. Just... ignore everything after they return to earth. That part sucked. | 4 | Fantastic game, bad ending | 1,332,115,200 | 03 19, 2012 |
A1DNY0KUX9J8JC | B008KYJ2DE | Ombranox | [
6,
6
] | I purchased this item at Toys'r'Us for 10 dollars. It's a fairly nice toy, I suppose, but you are getting HOSED if you buy it for 70. A major grievance of mine is that her head isn't really... secure on there, so rough play( if little girls engage in that, I don't really know) is inadvisable. But yeah, I like it, good for a collector to get. | 4 | Got it a Toys R Us | 1,344,556,800 | 08 10, 2012 |
A1DNY0KUX9J8JC | B008SBZD5U | Ombranox | [
0,
0
] | The game is essentially 3 products, so I'll describe them individually.Kingdom Hearts 1.5 Remix is a good purchase, provided you either enjoy the series or wish to find a point to start at. It features the Final Mix version, which features a great many tweaks to the original game. There are a few control alterations, so the game ends up playing like a mix between Kingdom Hearts 1 and 2. Now, the final mix is a vastly more difficult version of the original game, so unwary players are in for a nasty surprise if they start under the assumption that it is nearly identical to the original. Although most of the tweaks Final Mix offers are aesthetic(the rank and file have altered color pallets, mostly veering towards earth tones; the bosses are much more colorful), there are quite a few alterations to the statistical nature of both foes and equipment. As a result, you can and will die at least once.The game looks much better than an average HD remaster, however there are occasional issues with sound, although they are easily fixed by saving and reloading.Re:Chain of Memories, however, is(apart from the visual upgrade) nearly identical to how it looked, played, and sounded back when it was released stateside in 2008. While it is vastly more fun than the original gameboy version, there isn't anything to gush or slam in this version. Cards are still weird, but once you have a grasp of the mechanics they're pretty fun.358/2 Days is the only disappointment in the collection. It is the cutscenes from the DS game, remastered in HD with the occasional wall of text detailing what WOULD have been a mission in the original game. The end result is a tedious 3 hour film with one fight scene. If not for the fact that the lore offered is quite important for someone to understand the plot developments later on(and 3 gold trophies), it would be a pointless inclusion.In short, technical issues and superfluous films aside, 1.5 Remix is a damn good game. If Square Enix took care of those issues, it would have been a f^ckballs amazing game. As it is, it's fine. The only thing its really accomplished is getting me excited for 2.5 HD Remix and the third installment. | 4 | Back... With a vengeance. | 1,379,635,200 | 09 20, 2013 |
A1DNY0U4EVNALS | B000002BQ5 | Del guerrero | [
0,
0
] | I love this CD because it reminds me of the words of God and of what the bible says and I livemy life obeying God.. Every time I listen to this CD, I drink the wine ( sometimes there is no wine so, I use tequila or vodka ) and I go forth and multiply. Just like God demands. | 5 | nice. | 1,387,497,600 | 12 20, 2013 |
A1DNY0U4EVNALS | B000AST3AK | Del guerrero | [
0,
0
] | These water filters are great and work well and make the water taste clean and good. I even put these filters through a test i invented by myself. I pee'd in the water and then i cleaned the pee'd water with these filters and the water came out clear. There was no yellow or yellowish brown in the water from my pee and there was no pee taste in the water either after in pee'd in the water and then cleaned the water with this filter. I recomend this filter to anybody.. Great buy. | 5 | Great water filters. | 1,365,292,800 | 04 7, 2013 |
A1DNY0U4EVNALS | B0019I3KT0 | Del guerrero | [
1,
1
] | The only reason I gave this cowbell 5 stars is because it was cheap in price. I paid less than $5.00 for it, shipping and all.You get what you pay for . It's a useless, dumb toy. I threw it away. Can't expect much for the price. | 5 | I gave it 5 stars, only because .... | 1,387,497,600 | 12 20, 2013 |
A1DNY0U4EVNALS | B005N9DOLA | Del guerrero | [
0,
0
] | after I got these diabetic socks, I had to get a pair of Scissors and cut then from the top ankle area because they were too tight for my ankles and they were cutting off my blood circulation and painful | 2 | Have a pair of Scissors ready | 1,381,276,800 | 10 9, 2013 |
A1DNY0U4EVNALS | B007W5HHI4 | Del guerrero | [
0,
0
] | The watch is great if you dont text to much. It will limit your ability to text a lot. You will be able to send short text messges however,it's a little tiring to send messages becuse the screen and the the letters and numbers for texting are too small. thats why i gave this watch a four. | 4 | No problems with my phone watch | 1,365,292,800 | 04 7, 2013 |
A1DNY1A9X7Q0J3 | B001BBIPR2 | null | [
2,
2
] | I purchased a Large Gregory backpack rain cover for my Kelty Coyote 80 Internal Frame Backpack. It worked great. The clip on top and the Velcro strap that connects the bungie cords on the side towards the bottom ensures that the cover will not come off. However I think the Kelty Coyote 80 is a little wider than the Gregory backpacks since from side to side the cover barely fit over may backpack. From top to bottom there was plenty of length.All in all, it is a great cover. It performed very well in the rain. I would purchase it again... | 5 | Works well for the Kelty Coyote 80 Internal Frame Backpack | 1,345,161,600 | 08 17, 2012 |
A1DNY1A9X7Q0J3 | B001EOZVCS | Cliff | [
0,
0
] | I have now purchased three sets of these lights and they are great. The lights are very bright. I have not received a dim light yet. The light is turned on by pressing the larger circular center of the light case body. A small slide switch is very effective at keep the light on.NOTE THAT THESE LIGHTS ARE NOT WATERPROOF. Although for the price I can't complain. One of these lights got immersed in water. As a result the light remained on although very dim. I removed the four screws the hold the light together to dry the internal components. After drying the internal components, the light continued to work fine. These lights are as simple as they can get. On the inside is simply two coin batteries and a LED. I suppose you could replace the batteries when they are dead.I am very happy with the purchase and would recommend these on anyone. | 5 | Can't beat it for the money - Not Water proof | 1,345,161,600 | 08 17, 2012 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.