constructelligence/masterformat-classifier

MasterFormat classifier (mf-0.2) — construction spec & line-item classification

Constructelligence is developing frontier construction-AI models. This classifier is the lite, open tier — released for research and evaluation; the company's flagship production models are a separate, larger tier (see constructelligence.co).

A BERT text classifier that maps construction line items, specification paragraphs, submittals and section titles to one of 171 MasterFormat level-2 groups (e.g. 03 30 00 Cast-in-Place Concrete, 23 30 00 HVAC Air Distribution) across 32 divisions. It is the machine-learning counterpart to a cost-code lookup table: hand it "EPDM membrane roofing" and it returns the MasterFormat group, ranked. English text, one label per input.

Built for estimating, takeoff, spec-writing and RAG pipelines that need to tag free text with CSI MasterFormat codes without a human choosing from a 171-row list.

Completed GPU fine-tune. mf-0.2 is the full run that mf-0.1 (step 700) was an early checkpoint of: 6,132 steps / 12 epochs on a Kaggle T4 over the rebuilt v2 dataset. Top-1 accuracy on the v2 UFGS validation split is 46.6 % — 2.3× mf-0.1 (20.0 %). Line-item accuracy on 194 hand-labelled estimate items is 59.7 % (was 28.3 %), and whole-section accuracy is 60.7 % with 81.0 % at division level. Because the transformer is trained on specification prose, short estimate line items are its weak spot; the repo therefore also ships a transformer + TF-IDF ensemble (ensemble/) that lifts line-item top-1 to 70.2 % and improves manual-chunk and section accuracy; see Ensemble.

Update (Oct 2026): bid-item shorthand. Both predictors now expand agency bid abbreviations (CONC BOX CULV → concrete box culvert) before classifying. On 790 real TxDOT bid items the ensemble goes from 19.9 % to 48.9 % top-1 with no change on any earlier evaluation; see Agency bid-item shorthand.

MasterFormat is a registered trademark of CSI / CSC. This project is independent and not affiliated with or endorsed by them.

Quick start

from transformers import pipeline

clf = pipeline("text-classification", model="constructelligence/masterformat-classifier", top_k=3)
for p in clf("EPDM membrane roofing"):
    print(p["label"], round(p["score"], 3))
# 07 50 00 Membrane Roofing 0.863
# 07 10 00 Dampproofing and Waterproofing 0.068
# 07 30 00 Steep Slope Roofing 0.047

Batched, with the level-1 division roll-up and JSON output:

pip install -r requirements.txt        # transformers + torch
python predict.py --top-k 5 --divisions "Addressable fire alarm system, devices and panel"
echo "12\" RCP storm drain pipe" | python predict.py -
python predict.py --file items.txt --json > out.json

ONNX (no torch, ~34 MB int8):

pip install onnxruntime transformers
python predict.py --onnx onnx/model_quantized.onnx "Wet pipe sprinkler system, light hazard"

The encoder is English-only; inputs should be English.

ONNX exports

onnx/model.onnx (fp32, 134 MB) and onnx/model_quantized.onnx (dynamic int8, 34 MB) are exported with dynamic batch and sequence axes, in the layout transformers.js / Optimum expect — inputs input_ids, attention_mask, token_type_ids, output logits. The fp32 export matches PyTorch on a 4-text smoke set (max |Δ logit| 1e-5, argmax agreement 4/4). Dynamic int8 quantization shifts the logits more than it did for mf-0.1 — the better-trained head is more confident — so verify the quantized model on your own inputs; the fp32 export is the safer default. Reproduce with python scripts/export_onnx.py runs/mf-0.2.

Model

• Base: BAAI/bge-small-en-v1.5 (BERT, 33M parameters, 384-d, MIT).
• Head: 171-way sequence-classification layer; id2label / label2id are in config.json.
• Recipe: label smoothing 0.05, max length 64, batch 128, 12 epochs (6,132 steps), fp16 autocast, AdamW with 6 % linear warmup; body LR 5e-5, head LR 1e-3; embeddings and the first 4 encoder layers frozen.
• Checkpoint: train_state.json records {"step": 6132, "val_acc": 0.4661}.
• Trained on: Kaggle T4, ~16.5 min wall-clock, from BAAI/bge-small-en-v1.5 (not resumed from mf-0.1).

Results

All numbers are measured in this project on held-out data. The line_items, manuals and manual_sections sets are fixed, so those columns are directly comparable for every scorer. val is the v2 UFGS split (11,598 units).

v2 validation split

Scorer	val top-1	val top-3	val division
mf-0.2 (step 6132, published)	0.466	0.641	0.593
mf-0.3 (v3 data, unfrozen)	0.556	0.710	0.662
mf-0.4 (v2 data, unfrozen)	0.491	0.657	0.609
mf-0.1 (step 700)	0.200	0.372	0.356
TF-IDF (word + char n-grams)	0.571	0.732	0.670

Fixed held-out sets (line items · manual chunks · whole sections)

Scorer	line-item top-1	manual-chunk top-1	manual-section top-1	manual-section division
mf-0.2 (step 6132, published)	0.597	0.280	0.607	0.810
mf-0.3 (v3 data, unfrozen)	0.597	0.259	0.547	0.765
mf-0.4 (v2 data, unfrozen)	0.618	0.270	0.567	0.817
mf-0.1 (step 700)	0.283	0.176	0.287	0.588
TF-IDF (word + char n-grams)	0.696	0.287	0.587	0.752
Ensemble mf-0.2 + TF-IDF (w = 0.25)	0.702	0.330	0.620	0.804

line_items = 194 hand-labelled estimate line items; manuals = 6,890 chunks from 153 sections of two real commercial project manuals; out-of-taxonomy gold labels (e.g. 22 40 00) count only toward the division score, so top-1 is over in-taxonomy items only.

Evidence caveat. The line-item and section sets are small. At n = 191 the 95 % Wilson interval on the line-item top-1 is [0.633, 0.762] (±6.4 pts), and whole-section is ±~8 pts — so differences of a few points between models here are noise. Treat the val and manual-chunk rows (±1 pt) as the measurable ones, and the line-item/section rows as indicative. Enlarging these eval sets is the top item on the roadmap.

Reading it: mf-0.2 is the best scorer overall at section-level division accuracy (0.810). On short line items a lexical TF-IDF model is stronger (0.696 alone), so the shipped transformer + TF-IDF ensemble reaches 0.702 and is the production candidate; see Ensemble.

Ensemble (closing the line-item gap)

The transformer is trained on specification prose, so on short, terse estimate line items a lexical TF-IDF model is still stronger (0.696 vs 0.597 top-1). To close that gap without giving up the transformer's long-text accuracy, this repo ships a log-probability ensemble of mf-0.2 and a TF-IDF + SGD scorer:

p = softmax( 0.25 · log_softmax(mf-0.2)  +  0.75 · log_softmax(tfidf) )

The 0.25 weight is chosen on the UFGS validation split — not on the line-item test set. ensemble/tfidf.joblib holds the fitted vectorizer (word 1–2 grams, 100k features, plus char_wb 3–5 grams, 150k features, min_df 2/3, sublinear tf) and SGD logistic classifier; ensemble/blend.json records the weight and all metrics; ensemble/predict_ensemble.py runs the blend.

Scorer	val top-1	val division	line-item top-1	manual-chunk top-1	manual-section top-1	manual-section division
mf-0.2 (transformer)	0.466	0.593	0.597	0.280	0.607	0.810
TF-IDF (word + char n-grams)	0.571	0.670	0.696	0.287	0.587	0.752
Ensemble (w = 0.25)	0.588	0.689	0.702	0.330	0.620	0.804

pip install transformers torch scikit-learn joblib
python ensemble/predict_ensemble.py --model constructelligence/masterformat-classifier \
    --tfidf ensemble/tfidf.joblib --top-k 3 --divisions "4000 psi concrete slab on grade"

Honest caveat. The ensemble beats TF-IDF alone mainly on the transformer's strengths — validation top-1 (0.588 vs 0.571), manual-chunk top-1 (0.330 vs 0.287) and whole-section top-1 (0.620 vs 0.587) — while line items are nearly saturated by TF-IDF (0.702 vs 0.696). Adding bge-small embeddings does not help once the blend weight is chosen on val (its weight goes to ~0); an earlier 0.712 line-item figure came from tuning the weights on the 194-item test itself and does not generalise. The transformer remains the best scorer at section division accuracy (0.810). A reasonable production split is the transformer for whole sections, the ensemble for terse line items.

Agency bid-item shorthand

Public bid tabulations write items in a terse shorthand the transformer never saw in spec prose: RE PM W/RET REQ TY I (W)6"(SLD)(060MIL), CL C CONC (RAIL FOUNDATION), CONC BOX CULV (5 FT X 2 FT). Read literally, the model sends CL B CONC to Structured Cabling and RE PM to Electrical Utilities. abbrev.py expands 82 common US bid abbreviations (CONC, PAV, CULV, REINF, ASPH, W/…) before scoring — all-caps tokens only, so prose is left alone, and the original text is appended so nothing is lost. predict.py and ensemble/predict_ensemble.py do this by default; --no-expand turns it off. The dictionary is written from general bid-item conventions, not fitted to the evaluation below.

Evaluation: 790 TxDOT bid items. Real item descriptions from Texas DOT public bid tabulations, labelled by txdot_crosswalk.json — a table mapping 41 TxDOT standard-specification item numbers to MasterFormat groups (17 groups, Divisions 01–03, 26, 31–34). Items that could belong to more than one group (repairs, temporary work-zone items, signs/signals, special provisions) are left out. Capped scores keep at most 20 rows per TxDOT item, so pavement markings (207 rows) cannot dominate. 95 % Wilson intervals.

Scorer	top-1	top-1, capped (n = 529)	top-3	division
mf-0.2 (transformer), raw text	0.125 [0.104, 0.150]	0.161	0.239	0.225
mf-0.2, abbreviations expanded	0.270 [0.240, 0.302]	0.272	0.546	0.352
TF-IDF, raw text	0.266 [0.236, 0.298]	0.246	0.451	0.339
TF-IDF, expanded	0.484 [0.449, 0.518]	0.348	0.629	0.559
Ensemble, raw text	0.199 [0.172, 0.228]	0.223 [0.190, 0.260]	0.416	0.285
Ensemble, expanded (default)	0.489 [0.454, 0.523]	0.369 [0.329, 0.411]	0.671	0.570

On the earlier sets the expansion changes 1 of 194 line items and 39 of 6,890 manual chunks: line items stay at 0.702, manual chunks at 0.330, and whole-section top-1 moves 0.620 → 0.627.

Reading it. The expansion is the largest single gain this model has had on real estimate text, with non-overlapping intervals. It is still well below the 70 % on hand-written building line items: highway bid items are out of domain for a UFGS-trained model, and these labels come from an item-number crosswalk (reviewed, not per-item), covering civil work only.

Calibration and abstention

The ensemble is already close to calibrated; a single temperature T = 0.90 (fit on val) lowers the expected calibration error on val from 0.060 to 0.022. More useful in production: send the lowest-confidence predictions to a human instead of filing them.

Coverage → precision on the 194 line items (predictions sorted by confidence):

auto-filed (coverage)	100 %	90 %	80 %	70 %	50 %	30 %
precision	0.69	0.75	0.81	0.85	0.91	0.97

Routing the least-confident 30 % to review lifts precision to 91 %; routing 50 % gives 97 %. So the model is usable today as an assist that flags its own uncertainty, even though it is not accurate enough to file unattended. Reproduce with python cloud/stats.py.

Roadmap

Further gains are evidence-bound, not architecture-bound (see the repo's IMPROVEMENT-PLAN.md):

1. Enlarge the eval (≥1,000 line items, ≥400 sections) so changes are measurable at ±3 pts. Progress: 790 crosswalk-labelled TxDOT bid items (±3.5 pts, civil only); building-estimate items are still 194.
2. Real line-item training data (public bid tabulations, agency item catalogs) — the transformer's line-item ceiling is a data problem; synthetic augmentation was tested and did not transfer (mf-0.3).
3. Domain-adaptive pretraining on construction prose beyond UFGS, then retrain.
4. Distillation + hierarchical (division → group) head to beat the TF-IDF blend with a single model.
5. Level-3 / full-section codes and an explicit out-of-taxonomy fallback.

Intended use

• Use it for: tagging construction text with a candidate MasterFormat group (top-3 shown), an auto-classification step for estimating or spec workflows, and as a strong base to fine-tune or distil.
• Do not use it for: unattended production takeoff, bid pricing, code compliance, or anything where a wrong cost code has financial or contractual consequences. Keep a human in the loop.
• Not a substitute for review. Classifies text content only — if the input already contains a MasterFormat number, read the number instead.

Training data and taxonomy

• Source: UFGS (Unified Facilities Guide Specifications) .SEC files — US federal works in the public domain. Paragraphs and titles are parsed into labelled text units; boilerplate shared by multiple sections is dropped, cross-references are stripped so section numbers cannot leak labels, and long paragraphs are cut on sentence boundaries into 8–60-word windows.
• Split: held out by a hash of the normalised source text (10 %), so a paragraph and its augmentations stay on the same side. 65,496 train / 11,598 val rows (the v2 set).
• Taxonomy: 171 level-2 groups over 32 MasterFormat divisions; group numbers follow the MasterFormat numbering convention and the short names are this project's own (see config.json).

Limitations

• Below the ensemble on line items. 59.7 % vs 70.2 % on 194 hand-labelled estimate items; do not deploy as the sole classifier.
• Domain skew. UFGS over-represents heavy-civil, water/wastewater and process work relative to commercial building estimates; the training set is class-balanced, so raw predictions do not reflect building-project priors.
• Out-of-taxonomy inputs (sections whose level-2 group is not among the 171) can only be scored at division level.
• Short, terse line items are the hardest inputs; division (2-digit) accuracy is consistently higher than group (6-digit) accuracy. Agency shorthand is expanded by abbrev.py, but abbreviations outside its dictionary, and highway work generally, remain weak (48.9 % top-1 on TxDOT bid items).
• Quantized ONNX drifts. The int8 export is smaller but less faithful than mf-0.1's; prefer fp32.

Bias, risks and safety

• Estimating bias. Class-balanced training over a public-domain federal corpus does not represent any particular firm's cost structure or regional practice. Do not treat output as a standard or an authority.
• Trademark. MasterFormat is a registered trademark of CSI / CSC; this model is not endorsed by them and its group names are the project's own short descriptions, not CSI's official titles.
• Privacy. The model runs locally; no input text leaves your machine unless you call a hosted endpoint.

FAQ

What is MasterFormat? The CSI/CSC MasterFormat is the North American standard for organising construction specifications and cost data into numbered divisions and sections. This model predicts the level-2 group (a 6-digit code such as 03 30 00 Cast-in-Place Concrete), not the full section number.

How is this different from mf-0.1? mf-0.1 was step 700 of an interrupted CPU run; mf-0.2 is the completed 12-epoch GPU fine-tune on the rebuilt dataset. Same architecture, ~2.3× the validation accuracy.

Can it classify a whole specification section? Yes — average the model's log-probabilities over a section's chunks. On two real project manuals that gives 60.7 % top-1 and 81.0 % at division level.

Can it read a MasterFormat number out of the text? No. It classifies the description. If the number is already present, parse it directly.

Does it work offline / in the browser? Yes — the ONNX exports are intended for onnxruntime and transformers.js.

Is a better model available? Yes — this repo ships a transformer + TF-IDF ensemble (ensemble/) that scores 70.2 % top-1 on hand-labelled line items (vs 59.7 % for the transformer alone) and improves manual-chunk and whole-section accuracy. Constructelligence's proprietary models are at constructelligence.co.

Files

• model.safetensors, config.json, tokenizer.json, tokenizer_config.json, vocab.txt, special_tokens_map.json — standard transformers checkpoint.
• train_state.json — step and validation accuracy of the saved checkpoint.
• metrics.json — full held-out evaluation (val, line_items, manuals, manual_sections).
• predict.py — CLI example: batching, --top-k, --divisions, --json, stdin/file input, --onnx.
• onnx/ — ONNX fp32 and int8 exports.
• ensemble/ — tfidf.joblib (word + char n-grams, ~112 MB), blend.json, predict_ensemble.py: the transformer + TF-IDF line-item ensemble.
• abbrev.py — bid-item abbreviation expansion used by both predictors (--no-expand to disable).
• txdot_crosswalk.json — TxDOT item number → MasterFormat group table behind the bid-item evaluation.
• IMPROVEMENT-PLAN.md — the prioritised roadmap (enlarged eval, data, domain-adaptive pretraining, distillation).
• CITATION.cff, requirements.txt.

Citation

@misc{constructelligence_masterformat_classifier,
  title        = {MasterFormat Classifier (mf-0.2): construction spec and line-item classification},
  author       = {Constructelligence},
  year         = {2026},
  howpublished = {\url{https://huggingface.co/constructelligence/masterformat-classifier}},
  note         = {Fine-tuned from BAAI/bge-small-en-v1.5; 171-way MasterFormat level-2 classifier}
}

Licence and attribution

Released under the MIT licence, matching the base model. UFGS source text is public domain. MasterFormat is a registered trademark of CSI / CSC; this project is not affiliated with or endorsed by them. Constructelligence's production models are available at constructelligence.co.