Daily Papers

As Retrieval-Augmented Generation (RAG) shifts toward diverse portfolio generation, it is stymied by two critical bottlenecks: flawed measurement of evidence utilization, and suboptimal context budget allocation. We resolve both sequentially. To resolve measurement, we expose a pervasive ``diagnostic illusion'': standard relevance proxies fail catastrophically on hard negatives. We replace them with an efficient causal leave-one-out probe that accurately isolates generative reliance and formally calibrates the structural dilution of LLM attention. To resolve allocation, we deploy this causal probe in a deconfounded factorial grid. We prove that the prevailing strategy of monolithic context widening is an architectural trap penalized by relevance decay. Instead, allocating compute iteratively across multiple sequential generations drives transformative portfolio recall gains of 16.7--20.5 absolute percentage points, scaling robustly up to 32B models. Finally, we unify these solutions into a deployable closed-loop submodular scheduler. Augmented by an attribution-steered contrastive decoder to override LLM attention inertia, our architecture systematically forces fresh evidence integration. By dominating classical open-loop baselines, we establish sequential, feedback-driven orchestration as the definitive paradigm for generative search. Our code, data, and causal measurement instruments are available at https://github.com/PeiYangLiu/ascp.

Reinforcement Learning with Verifiable Rewards (RLVR) can elicit strong multi-step reasoning, yet it often encourages overly verbose traces. Moreover, naive length penalties in group-relative optimization can severely hurt accuracy. We attribute this failure to two structural issues: (i) Dilution of Length Baseline, where incorrect responses (with zero length reward) depress the group baseline and over-penalize correct solutions; and (ii) Difficulty-Penalty Mismatch, where a static penalty cannot adapt to problem difficulty, suppressing necessary reasoning on hard instances while leaving redundancy on easy ones. We propose Dynamic Decoupled Conditional Advantage (DDCA) to decouple efficiency optimization from correctness. DDCA computes length advantages conditionally within the correct-response cluster to eliminate baseline dilution, and dynamically scales the penalty strength using the group pass rate as a proxy for difficulty. Experiments on GSM8K, MATH500, AMC23, and AIME25 show that DDCA consistently improves the efficiency--accuracy trade-off relative to adaptive baselines, reducing generated tokens by approximately 60% on simpler tasks (e.g., GSM8K) versus over 20% on harder benchmarks (e.g., AIME25), thereby maintaining or improving accuracy. Code is available at https://github.com/alphadl/DDCA.

Conversational Aspect-based Sentiment Quadruple Analysis (DiaASQ) needs to capture the complex interrelationships in multiple rounds of dialogues. Existing methods usually employ simple Graph Convolutional Networks (GCN), which introduce structural noise and fail to consider the temporal sequence of the dialogues, or use standard RoPE, which implicitly captures relative distances in a flat sequence but cannot clearly separate the token-level syntactic order from the utterance-level progression, and may suffer from the Distance Dilution problem. To address these issues, we propose a new framework that combines Thread-Constrained Directed Acyclic Graph (TC-DAG) and Discourse-Aware Rotary Position Embedding (D-RoPE). Specifically, TC-DAG filters out cross-thread noise based on thread constraints, maintains global connectivity through root anchoring, and incorporates the temporal sequence of the dialogues. D-RoPE aligns multi-layer semantics using dual-stream projection and multi-scale frequency signals, captures thread dependencies using tree-like distances, and alleviates the token-level Distance Dilution problem by incorporating utterance-level progressions. Experimental results on two benchmark datasets demonstrate that our framework achieves state-of-the-art performance.

The principle of detailed balance states that in equilibrium each elementary process is equilibrated by its reverse process. For many real physico-chemical complex systems (e.g. homogeneous combustion, heterogeneous catalytic oxidation, most enzyme reactions etc), detailed mechanisms include both reversible and irreversible reactions. In this case, the principle of detailed balance cannot be applied directly. We represent irreversible reactions as limits of reversible steps and obtain the principle of detailed balance for complex mechanisms with some irreversible elementary processes. We proved two consequences of the detailed balance for these mechanisms: the structural condition and the algebraic condition that form together the extended form of detailed balance. The algebraic condition is the principle of detailed balance for the reversible part. The structural condition is: the convex hull of the stoichiometric vectors of the irreversible reactions has empty intersection with the linear span of the stoichiometric vectors of the reversible reaction. Physically, this means that the irreversible reactions cannot be included in oriented pathways. The systems with the extended form of detailed balance are also the limits of the reversible systems with detailed balance when some of the equilibrium concentrations (or activities) tend to zero. Surprisingly, the structure of the limit reaction mechanism crucially depends on the relative speeds of this tendency to zero.

Structural biology relies on accurate three-dimensional biomolecular structures to advance our understanding of biological functions, disease mechanisms, and therapeutics. While recent advances in deep learning have enabled the development of all-atom foundation models for molecular modeling and generation, existing approaches face challenges in generalization due to the multi-modal nature of atomic data and the lack of comprehensive analysis of training and sampling strategies. To address these limitations, we propose PharMolixFM, a unified framework for constructing all-atom foundation models based on multi-modal generative techniques. Our framework includes three variants using state-of-the-art multi-modal generative models. By formulating molecular tasks as a generalized denoising process with task-specific priors, PharMolixFM achieves robust performance across various structural biology applications. Experimental results demonstrate that PharMolixFM-Diff achieves competitive prediction accuracy in protein-small-molecule docking (83.9% vs. 90.2% RMSD < 2Å, given pocket) with significantly improved inference speed. Moreover, we explore the empirical inference scaling law by introducing more sampling repeats or steps. Our code and model are available at https://github.com/PharMolix/OpenBioMed.

Focusing on simulated dilute polymer solutions, this letter investigates the interactions between flow structures and organized polymer stress sheets for the steady arrowhead coherent structure in a two-dimensional periodic channel flow. Formulating the problem in a frame of reference moving with the arrowhead velocity, streamlines, which are also pathlines in this frame, enables the identification of two distinct topological regions linked to two stagnation points. The streamlines help connecting the spatial distribution of polymer stress within the sheets and the dynamics of polymers transported by the flow. Using stresslines, lines parallel to the eigenvectors of polymer stress, a novel formulation of the viscoelastic stress term in the momentum transport equation proposes a more intuitive interpretation of the relation between the curvature of the stresslines, and the variation of stress along these lines, with the local flow topology. An approximation of this formulation is shown to explain the pressure jump observed in the arrowhead structure as a function of the local curvature of the polymer stress sheet.

Sparse autoencoders (SAEs) are widely used to extract interpretable features from neural network representations, often under the implicit assumption that concepts correspond to independent linear directions. However, a growing body of evidence suggests that many concepts are instead organized along low-dimensional manifolds encoding continuous geometric relationships. This raises three basic questions: what does it mean for an SAE to capture a manifold, when do existing SAE architectures do so, and how? We develop a theoretical framework that answers these questions and show that SAEs can capture manifolds in two fundamentally different ways: globally, by allocating a compact group of atoms whose linear span contains the entire manifold, or locally, by distributing it across features that each selectively tile a restricted region of the underlying geometry. Empirically, we find that SAEs suboptimally recover continuous structures, mixing the global subspace and local tiling solutions in a fragmented regime we call dilution. This explains why manifold structure is rarely visible at the level of individual concepts and motivates post-hoc unsupervised discovery methods that search for coherent groups of atoms rather than isolated directions. More broadly, our results suggest that future representation learning methods should treat geometric objects, not just individual directions, as the basic units of interpretability.

Structural fidelity is essential to scientific methodology diagrams. To communicate research logic, these diagrams must faithfully render components, directional relations, and textual annotations. Since a single error, such as a reversed arrow or an unreadable equation, can invalidate the entire figure, structural fidelity is inherently conjunctive: correctness on one axis cannot compensate for failure on another. Current open-source models fail to satisfy this criterion. Supervised fine-tuning (SFT) learns plausible layouts but cannot reliably ensure structural correctness, while scalar reward-based post-training obscures which structural dimension has failed. To address this, we introduce SciForma, a framework for the structure faithful generation of scientific methodology diagrams. Specifically, SciForma decomposes diagram quality into three structural axes: Component, Arrow, and Text, guided by a structural inventory. Built on this foundation, we curate SciFormaData-700K for structured training and SciFormaBench-2K for logic-verified evaluation. To close the gap left by SFT, we develop Multi-Dimensional Conjunctive Preference Optimization (M-DPO), which enforces simultaneous correctness across all axes and adaptively routes gradients to the most deficient dimension in post-training. The same structural inventory also enables iterative editing at inference time to correct residual errors. This combination allows SciForma-9B to exceed all open-source baselines and GPT-Image-1.5 on both SciFormaBench-2K and AIBench, bringing open scientific diagram generation close to proprietary-level structural fidelity. Our code and data will be available at: https://github.com/microsoft/SciForma.

A modern challenge of Artificial Intelligence is learning multiple patterns at once (i.e.parallel learning). While this can not be accomplished by standard Hebbian associative neural networks, in this paper we show how the Multitasking Hebbian Network (a variation on theme of the Hopfield model working on sparse data-sets) is naturally able to perform this complex task. We focus on systems processing in parallel a finite (up to logarithmic growth in the size of the network) amount of patterns, mirroring the low-storage level of standard associative neural networks at work with pattern recognition. For mild dilution in the patterns, the network handles them hierarchically, distributing the amplitudes of their signals as power-laws w.r.t. their information content (hierarchical regime), while, for strong dilution, all the signals pertaining to all the patterns are raised with the same strength (parallel regime). Further, confined to the low-storage setting (i.e., far from the spin glass limit), the presence of a teacher neither alters the multitasking performances nor changes the thresholds for learning: the latter are the same whatever the training protocol is supervised or unsupervised. Results obtained through statistical mechanics, signal-to-noise technique and Monte Carlo simulations are overall in perfect agreement and carry interesting insights on multiple learning at once: for instance, whenever the cost-function of the model is minimized in parallel on several patterns (in its description via Statistical Mechanics), the same happens to the standard sum-squared error Loss function (typically used in Machine Learning).

RL post-training strategies are dataset-dependent and reveal a recurring empirical pattern: capacity parameters accumulate monotonically across stages, while regularization parameters predominantly oscillate in response to shifting training dynamics. This distinction matters because fixed schedules commit all parameters to fixed trajectories and therefore cannot express the non-stationary exploration-exploitation tradeoffs that regularization must track; the principle provides actionable design rules for multi-stage training. We discover this through LLMZero, a system where LLM agents search over training trajectories via tree search, diagnosing pathologies at each checkpoint and proposing coordinated multi-parameter transitions. Across 4 diverse GRPO tasks, LLMZero discovers strategies that improve over the base model by 9% to 140% relative and over grid search by 6% to 15% relative, consistently outperforming random search and the skill-based agent. The structural principle transfers across tasks, providing an explanation for why discovered strategies take qualitatively different forms yet share similar parameter dynamics.

The interdiffusion coefficients are estimated either following the Wagner's method expressed with respect to the composition (mol or atomic fraction) normalized variable after considering the molar volume variation or the den Broeder's method expressed with respect to the concentration (composition divided by the molar volume) normalized variable. On the other hand, the relations for estimation of the intrinsic diffusion coefficients of components as established by van Loo and integrated diffusion coefficients in a phase with narrow homogeneity range as established by Wagner are currently available with respect to the composition normalized variable only. In this study, we have first derived the relation proposed by den Broeder following the line of treatment proposed by Wagner. Further, the relations for estimation of the intrinsic diffusion coefficients of the components and integrated interdiffusion coefficient are established with respect to the concentration normalized variable, which were not available earlier. The veracity of these methods is examined based on the estimation of data in Ni-Pd, Ni-Al and Cu-Sn systems. Our analysis indicates that both the approaches are logically correct and there is small difference in the estimated data in these systems although a higher difference could be found in other systems. The integrated interdiffusion coefficients with respect to the concentration (or concentration normalized variable) can only be estimated considering the ideal molar volume variation. This might be drawback in certain practical systems.

Standard LLM distillation wastes compute on two fronts: problems the student has already mastered (near-zero gradients) and problems far beyond its reach (incoherent gradients that erode existing capabilities). We show that this waste is not merely intuitive but structurally inevitable: the gradient signal-to-noise ratio in distillation provably vanishes at both pass-rate extremes. This theoretical observation leads to Paced, a framework that concentrates distillation on the zone of proximal development -- the frontier of a student model's competence -- via a principled pass-rate weight w(p) = p^α(1 - p)^β derived from the boundary-vanishing structure of distillation gradients. Key results: (1) Theory: We prove that the Beta kernel w(p) = p^α(1-p)^β is a leading-order weight family arising from the SNR structure of distillation, and that it is minimax-robust -- under bounded multiplicative misspecification, worst-case efficiency loss is only O(δ^2). (2)Distillation: On distillation from a larger teacher to a smaller student model with forward KL, Paced achieves significant gain over the base model, while keeping benchmark forgetting at a low level. (3)Self-distillation: On instruction-tuned models with reverse KL, gains are exceeding baselines as well. (4)Two-stage synergy: A forward-KL-then-reverse-KL schedule yields the strongest results in our setting, reaching substantial improvements on standard reasoning benchmarks -- supporting a mode-coverage-then-consolidation interpretation of the distillation process. All configurations require only student rollouts to estimate pass rates, need no architectural changes, and are compatible with any KL direction.

Polymer membranes are typically assumed to be inert and nonresponsive to the flux and density of the permeating particles in transport processes. Here, we study theoretically the consequences of membrane responsiveness and feedback on the steady-state force--flux relations and membrane permeability using a nonlinear-feedback solution-diffusion model of transport through a slab-like membrane. Therein, the solute concentration inside the membrane depends on the bulk concentration, c_0, the driving force, f, and the polymer volume fraction, phi. In our model, solute accumulation in the membrane causes a sigmoidal volume phase transition of the polymer, changing its permeability, which, in return, affects the membrane's solute uptake. This feedback leads to nonlinear force--flux relations, j(f), which we quantify in terms of the system's differential permeability, P_sys^{Delta}mathrm{dj}/{df}. We find that the membrane feedback can increase or decrease the solute flux by orders of magnitude, triggered by a small change in the driving force, and largely tunable by attractive versus repulsive solute--membrane interactions. Moreover, controlling the input, c_0 and f, can lead to steady-state bistability of phi and hysteresis in the force--flux relations. This work advocates that the fine-tuning of the membrane's chemo-responsiveness will enhance the nonlinear transport control features, providing great potential for future (self-)regulating membrane devices.

Structure-based drug design (SBDD) leverages the 3D structure of protein targets, often complemented by other spatial constraints, to generate candidate binding molecules. While diffusion models have dominated as a leading paradigm for high-quality 3D molecule generation, LLM-based methods are rapidly emerging in molecular design and have shown competitive performance in pocket-conditioned molecular generation. However, their ability to reason about physics and 3D spatial environments is largely underexplored. In this work, we systematically analyze whether current general-purpose LLMs are capable of navigating complex 3D constraints compared to established baselines such as specialized diffusion models. We consider 3D ligand generation conditioned on protein pockets together with ligand- and interaction-derived spatial constraints, including anchor fragments, pharmacophore points, and mandatory pocket-ligand interactions. To enable this evaluation, we introduce 3D-Fit - a token-efficient benchmarking strategy for assessing LLM performance on multi-conditioned spatial molecule generation. Our findings reveal a clear pattern in LLM spatial capabilities: while they still lag behind state-of-the-art approaches, they are promising and can handle multiple spatial constraints simultaneously, enabling scaling to heterogeneous setups.