Daily Papers

We present CaloClouds3, a model for the fast simulation of photon showers in the barrel of a high granularity detector. This iteration demonstrates for the first time how a pointcloud model can employ angular conditioning to replicate photons at all incident angles. Showers produced by this model can be used across the whole detector barrel, due to specially produced position agnostic training data. With this flexibility, the model is usable in a full simulation and reconstruction chain, which offers a further handle for evaluating physics performance of the model. As inference time is a crucial consideration for a generative model, the pre-processing and hyperparameters are aggressively optimised, achieving a speed up factor of two orders of magnitude over Geant4 at inference.

In-hand object reorientation is necessary for performing many dexterous manipulation tasks, such as tool use in less structured environments that remain beyond the reach of current robots. Prior works built reorientation systems assuming one or many of the following: reorienting only specific objects with simple shapes, limited range of reorientation, slow or quasistatic manipulation, simulation-only results, the need for specialized and costly sensor suites, and other constraints which make the system infeasible for real-world deployment. We present a general object reorientation controller that does not make these assumptions. It uses readings from a single commodity depth camera to dynamically reorient complex and new object shapes by any rotation in real-time, with the median reorientation time being close to seven seconds. The controller is trained using reinforcement learning in simulation and evaluated in the real world on new object shapes not used for training, including the most challenging scenario of reorienting objects held in the air by a downward-facing hand that must counteract gravity during reorientation. Our hardware platform only uses open-source components that cost less than five thousand dollars. Although we demonstrate the ability to overcome assumptions in prior work, there is ample scope for improving absolute performance. For instance, the challenging duck-shaped object not used for training was dropped in 56 percent of the trials. When it was not dropped, our controller reoriented the object within 0.4 radians (23 degrees) 75 percent of the time. Videos are available at: https://taochenshh.github.io/projects/visual-dexterity.

We revisit High-Resolution Range Profile (HRRP) classification with aspect-angle conditioning. While prior work often assumes that aspect-angle information is incomplete during training or unavailable at inference, we study a setting where angles are available for all training samples and explicitly provided to the classifier. Using three datasets and a broad range of conditioning strategies and model architectures, we show that both single-profile and sequential classifiers benefit consistently from aspect-angle awareness, with an average accuracy gain of about 7% and improvements of up to 10%, depending on the model and dataset. In practice, aspect angles are not directly measured and must be estimated. We show that a causal Kalman filter can estimate them online with a median error of 5{\textdegree}, and that training and inference with estimated angles preserves most of the gains, supporting the proposed approach in realistic conditions.

Bimanual dexterous tool use remains challenging for robots due to high-dimensional hand configurations and complex hand-tool-object dynamics and contact. Most existing control policies depend on future configuration references provided from demonstrations, while future action-conditioned world models require slow online planning over high-dimensional action sequences. A significant challenge is generating a dynamically consistent future reference trajectory without relying on privileged states from demonstrations or slow counterfactual planning. We propose DexFuture, a hierarchical system that couples a high-level Future-State Visuomotor Target Predictor with a low-level Target-Conditioned Structured Dexterous Policy. Conditioned on egocentric RGB, proprioceptive and geometric history, the high-level predictor constructs structured hand-tool-object visuomotor embeddings and uses a horizon-conditioned transformer to generate a multi-step future target trajectory. Then, the low-level policy tracks them with a target-conditioned per-link transformer. This hierarchy decouples coarse future reference generation from fine-grained action control, and slow long-horizon semantic prediction from high-frequency execution. On OakInk2 bimanual tool-use tasks, DexFuture achieves 90% of the privileged-oracle performance, compared to 7% for a no-reference policy. DexFuture operates at 60 Hz, approximately 250 times faster than DexWM-style Cross-Entropy Method (CEM) planning with a future action-conditioned world model.

We present the requirements, design and evaluation of the cryogenic continuously rotating half-wave plate (CHWP) for the Simons Observatory (SO). SO is a cosmic microwave background (CMB) polarization experiment at Parque Astron\'{o}mico Atacama in northern Chile that covers a wide range of angular scales using both small (0.42 m) and large (6 m) aperture telescopes. In particular, the small aperture telescopes (SATs) focus on large angular scales for primordial B-mode polarization. To this end, the SATs employ a CHWP to modulate the polarization of the incident light at 8 Hz, suppressing atmospheric 1/f noise and mitigating systematic uncertainties that would otherwise arise due to the differential response of detectors sensitive to orthogonal polarizations. The CHWP consists of a 505 mm diameter achromatic sapphire HWP and a cryogenic rotation mechanism, both of which are cooled down to sim50 K to reduce detector thermal loading. Under normal operation the HWP is suspended by a superconducting magnetic bearing and rotates with a constant 2 Hz frequency, controlled by an electromagnetic synchronous motor. We find that the number of superconductors and magnets that make up the superconducting magnetic bearing are important design parameters, especially for the rotation mechanism's vibration performance. The rotation angle is detected through an angular encoder with a noise level of 0.07 muradmathrm{s}. During a cooldown, the rotor is held in place by a grip-and-release mechanism that serves as both an alignment device and a thermal path. In this paper we provide an overview of the SO SAT CHWP: its requirements, hardware design, and laboratory performance.

A central aspiration of mechanistic interpretability is controllability: if we know where a behavior is represented in a model's activations, we should be able to modify it. This rests on a hidden premise -- that the direction which detects a behavior and the direction which controls it are the same, or close. We test this geometrically: what is the angle between the direction that best detects a behavior and the one that best causes it? If detection implies control the cosine is near 1; otherwise it quantifies a detection-intervention gap. On Gemma 2-2B-it, output format (clean JSON vs markdown fencing) collapses both roles onto one axis. Hallucination does not: the model detects fake entities with perfect linear separability (AUC = 1.000 from layer 5), yet that direction sits at cos = 0.12 (about 83 degrees) from the direction producing a refusal -- a small, reproducible alignment, far from the cos = 1 that "detection is control" would require. A detector built from activations, with no chosen tokens, likewise fails to align (cos = -0.06). The gap generalizes: across four models from three families and two scales (1B-9B), cos stays in [0.12, 0.20], identical before and after instruction tuning (0.1197 vs 0.1200), placing its origin in pretraining. A 15-degree rotation toward the refusal direction partially bridges it -- 73% and 60% refusal on two held-out fake-entity categories at 1.8% false positives. We then ask whether this cosine predicts steerability, and it does not: detection is a high-dimensional class, not a single direction, and what separates the steerable case is functional, not readable from a static angle. The cosine is a weight-computable signature of the dissociation between knowing and steering, not a predictor of it.

Modern neural network training relies on optimizers such as Adam and Muon which act on each weight matrix as a single object. Yet every weight matrix carries two distinct quantities -- a magnitude and a direction -- and all optimizers stepping in the matrix as a whole couple their dynamics: the directional change from an update depends on the current magnitude, while the magnitude drifts as a byproduct of learning the direction, so neither is governed directly by the learning rate. Typical training therefore leans on surrounding recipes such as weight decay and warmup to keep learning stable at scale, though these regulate the coupling only indirectly; other recent methods instead constrain the weight to a fixed-norm sphere, but add no learnable magnitude, leaving scale control to normalization layers alone. We propose Magnitude--Direction (MD) Decoupling, an optimizer modification that factorizes each weight into a fixed-norm direction on a hypersphere and learnable per-row and per-column magnitude gains, updated at separate learning rates, all while the model still sees a single fused weight tensor. The method is agnostic to the base optimizer and removes the need for weight decay and warmup. Across both Adam and Muon, MD Decoupling improves on well-tuned baselines, transfers the optimal LR across model width without retuning, and continues to help at scale on large Mixture-of-Experts (MoE) models. Treating magnitude and direction as separately controlled quantities thus yields more predictable training dynamics and a simple, broadly applicable improvement to modern optimizers.

Linear activation steering has gained popularity as a simple and empirically effective way to control language model behavior. More recently, spherical steering paradigms have been proposed to address limitations of additive interventions, often motivated by the assumption that hidden-state norm does not carry concept-relevant information. In this work, we revisit this assumption through a controlled empirical study designed to disentangle the roles of angular and radial components. We show that steering methods differ mainly in how they couple two geometric effects: changing a token's angular alignment with a concept direction and changing its hidden-state norm. Across seven language models, we find that concepts are represented primarily in angular structure, supporting the motivation for spherical methods, but that norm remains important for the stability and downstream effects of steering. Our results explain why interventions with similar concept-level effects can behave differently, and suggest that activation steering should be parameterized by interpretable angular and radial components of the intervention, rather than by a single additive coefficient that entangles these two effects.

Steering is a widely used technique for controlling large language models, yet its effects are often unstable and hard to predict. Existing theoretical accounts are largely based on the Linear Representation Hypothesis (LRH). While LRH assumes that concepts can be orthogonalized for lossless control, this idealized mapping fails in real representations and cannot account for the observed unpredictability of steering. By relaxing LRH's orthogonality assumption while preserving linear representations, we show that overlapping concept contributions naturally yield a sample-specific axis-orthogonal structure. We formalize this as the Cylindrical Representation Hypothesis (CRH). In CRH, a central axis captures the main difference between concept absence and presence and drives concept generation. A surrounding normal plane controls steering sensitivity by determining how easily the axis can activate the target concept. Within this plane, only specific sensitive sectors strongly facilitate concept activation, while other sectors can suppress or delay it. While the surrounding normal plane can be reliably identified from difference vectors, the sensitive sector cannot, introducing intrinsic uncertainty at the sector level. This uncertainty provides a principled explanation for why steering outcomes often fluctuate even when using well-aligned directions. Our experiments verify the existence of the cylindrical structure and demonstrate that CRH provides a valid and practical way to interpret model steering behavior in real settings: https://github.com/mbzuai-nlp/CRH.

Despite significant progress in alignment, large language models (LLMs) remain vulnerable to adversarial attacks that elicit harmful behaviors. Activation steering techniques offer a promising inference-time intervention approach, but existing methods suffer from critical limitations: activation addition requires careful coefficient tuning and is sensitive to layer-specific norm variations, while directional ablation provides only binary control. Recent work on Angular Steering introduces continuous control via rotation in a 2D subspace, but its practical implementation violates norm preservation, causing distribution shift and generation collapse, particularly in models below 7B parameters. We propose Selective Steering, which addresses these limitations through two key innovations: (1) a mathematically rigorous norm-preserving rotation formulation that maintains activation distribution integrity, and (2) discriminative layer selection that applies steering only where feature representations exhibit opposite-signed class alignment. Experiments across nine models demonstrate that Selective Steering achieves 5.5x higher attack success rates than prior methods while maintaining zero perplexity violations and approximately 100\% capability retention on standard benchmarks. Our approach provides a principled, efficient framework for controllable and stable LLM behavior modification. Code: https://github.com/knoveleng/steering

Offline goal-conditioned reinforcement learning (GCRL) learns goal-conditioned policies from static pre-collected datasets. However, accurate value estimation remains a challenge due to the limited coverage of the state-action space. Recent physics-informed approaches have sought to address this by imposing physical and geometric constraints on the value function through regularization defined over first-order partial differential equations (PDEs), such as the Eikonal equation. However, these formulations can often be ill-posed in complex, high-dimensional environments. In this work, we propose a physics-informed regularization derived from the viscosity solution of the Hamilton-Jacobi-Bellman (HJB) equation. By providing a physics-based inductive bias, our approach grounds the learning process in optimal control theory, explicitly regularizing and bounding updates during value iterations. Furthermore, we leverage the Feynman-Kac theorem to recast the PDE solution as an expectation, enabling a tractable Monte Carlo estimation of the objective that avoids numerical instability in higher-order gradients. Experiments demonstrate that our method improves geometric consistency, making it broadly applicable to navigation and high-dimensional, complex manipulation tasks. Open-source codes are available at https://github.com/HrishikeshVish/phys-fk-value-GCRL.

We present a new robotic foundation model, called π_{0.7}, that can enable strong out-of-the-box performance in a wide range of scenarios. π_{0.7} can follow diverse language instructions in unseen environments, including multi-stage tasks with various kitchen appliances, provide zero-shot cross-embodiment generalization, for example enabling a robot to fold laundry without seeing the task before, and perform challenging tasks such as operating an espresso machine out of the box at a level of performance that matches much more specialized RL-finetuned models. The main idea behind π_{0.7} is to use diverse context conditioning during training. This conditioning information, contained in the prompt, makes it possible to steer the model precisely to perform many tasks with different strategies. It is conditioned not just on a language command that describes what it should do, but on additional multimodal information that also describes the manner or strategy in which it should do it, including metadata about task performance and subgoal images. This enables π_{0.7} to use very diverse data, including demonstrations, potentially suboptimal (autonomous) data including failures, and data from non-robot sources. Our experiments evaluate π_{0.7} across numerous tasks with multiple robot platforms, on tasks that require speed and dexterity, language following, and compositional task generalization.

The regression of 3D Human Pose and Shape (HPS) from an image is becoming increasingly accurate. This makes the results useful for downstream tasks like human action recognition or 3D graphics. Yet, no regressor is perfect, and accuracy can be affected by ambiguous image evidence or by poses and appearance that are unseen during training. Most current HPS regressors, however, do not report the confidence of their outputs, meaning that downstream tasks cannot differentiate accurate estimates from inaccurate ones. To address this, we develop POCO, a novel framework for training HPS regressors to estimate not only a 3D human body, but also their confidence, in a single feed-forward pass. Specifically, POCO estimates both the 3D body pose and a per-sample variance. The key idea is to introduce a Dual Conditioning Strategy (DCS) for regressing uncertainty that is highly correlated to pose reconstruction quality. The POCO framework can be applied to any HPS regressor and here we evaluate it by modifying HMR, PARE, and CLIFF. In all cases, training the network to reason about uncertainty helps it learn to more accurately estimate 3D pose. While this was not our goal, the improvement is modest but consistent. Our main motivation is to provide uncertainty estimates for downstream tasks; we demonstrate this in two ways: (1) We use the confidence estimates to bootstrap HPS training. Given unlabelled image data, we take the confident estimates of a POCO-trained regressor as pseudo ground truth. Retraining with this automatically-curated data improves accuracy. (2) We exploit uncertainty in video pose estimation by automatically identifying uncertain frames (e.g. due to occlusion) and inpainting these from confident frames. Code and models will be available for research at https://poco.is.tue.mpg.de.

Teaching robots dexterous manipulation skills, such as tool use, presents a significant challenge. Current approaches can be broadly categorized into two strategies: human teleoperation (for imitation learning) and sim-to-real reinforcement learning. The first approach is difficult as it is hard for humans to produce safe and dexterous motions on a different embodiment without touch feedback. The second RL-based approach struggles with the domain gap and involves highly task-specific reward engineering on complex tasks. Our key insight is that RL is effective at learning low-level motion primitives, while humans excel at providing coarse motion commands for complex, long-horizon tasks. Therefore, the optimal solution might be a combination of both approaches. In this paper, we introduce DexterityGen (DexGen), which uses RL to pretrain large-scale dexterous motion primitives, such as in-hand rotation or translation. We then leverage this learned dataset to train a dexterous foundational controller. In the real world, we use human teleoperation as a prompt to the controller to produce highly dexterous behavior. We evaluate the effectiveness of DexGen in both simulation and real world, demonstrating that it is a general-purpose controller that can realize input dexterous manipulation commands and significantly improves stability by 10-100x measured as duration of holding objects across diverse tasks. Notably, with DexGen we demonstrate unprecedented dexterous skills including diverse object reorientation and dexterous tool use such as pen, syringe, and screwdriver for the first time.

Recently, learning-based controllers have been shown to push mobile robotic systems to their limits and provide the robustness needed for many real-world applications. However, only classical optimization-based control frameworks offer the inherent flexibility to be dynamically adjusted during execution by, for example, setting target speeds or actuator limits. We present a framework to overcome this shortcoming of neural controllers by conditioning them on an auxiliary input. This advance is enabled by including a feature-wise linear modulation layer (FiLM). We use model-free reinforcement-learning to train quadrotor control policies for the task of navigating through a sequence of waypoints in minimum time. By conditioning the policy on the maximum available thrust or the viewing direction relative to the next waypoint, a user can regulate the aggressiveness of the quadrotor's flight during deployment. We demonstrate in simulation and in real-world experiments that a single control policy can achieve close to time-optimal flight performance across the entire performance envelope of the robot, reaching up to 60 km/h and 4.5g in acceleration. The ability to guide a learned controller during task execution has implications beyond agile quadrotor flight, as conditioning the control policy on human intent helps safely bringing learning based systems out of the well-defined laboratory environment into the wild.

Recent progress in video diffusion models has spurred growing interest in camera-controlled novel-view video generation for dynamic scenes, aiming to provide creators with cinematic camera control capabilities in post-production. A key challenge in camera-controlled video generation is ensuring fidelity to the specified camera pose, while maintaining view consistency and reasoning about occluded geometry from limited observations. To address this, existing methods either train trajectory-conditioned video generation model on trajectory-video pair dataset, or estimate depth from the input video to reproject it along a target trajectory and generate the unprojected regions. Nevertheless, existing methods struggle to generate camera-pose-faithful, high-quality videos for two main reasons: (1) reprojection-based approaches are highly susceptible to errors caused by inaccurate depth estimation; and (2) the limited diversity of camera trajectories in existing datasets restricts learned models. To address these limitations, we present InfCam, a depth-free, camera-controlled video-to-video generation framework with high pose fidelity. The framework integrates two key components: (1) infinite homography warping, which encodes 3D camera rotations directly within the 2D latent space of a video diffusion model. Conditioning on this noise-free rotational information, the residual parallax term is predicted through end-to-end training to achieve high camera-pose fidelity; and (2) a data augmentation pipeline that transforms existing synthetic multiview datasets into sequences with diverse trajectories and focal lengths. Experimental results demonstrate that InfCam outperforms baseline methods in camera-pose accuracy and visual fidelity, generalizing well from synthetic to real-world data. Link to our project page:https://emjay73.github.io/InfCam/

When retrieval-augmented generation (RAG) systems hallucinate, what geometric trace does this leave in embedding space? We introduce the Semantic Grounding Index (SGI), defined as the ratio of angular distances from the response to the question versus the context on the unit hypersphere S^{d-1}.Our central finding is semantic laziness: hallucinated responses remain angularly proximate to questions rather than departing toward retrieved contexts. On HaluEval (n=5,000), we observe large effect sizes (Cohen's d ranging from 0.92 to 1.28) across five embedding models with mean cross-model correlation r=0.85. Crucially, we derive from the spherical triangle inequality that SGI's discriminative power should increase with question-context angular separation θ(q,c)-a theoretical prediction confirmed empirically: effect size rises monotonically from d=0.61 -low θ(q,c), to d=1.27 -high θ(q,c), with AUC improving from 0.72 to 0.83. Subgroup analysis reveals that SGI excels on long responses (d=2.05) and short questions (d=1.22), while remaining robust across context lengths. Calibration analysis yields ECE=0.10, indicating SGI scores can serve as probability estimates, not merely rankings. A critical negative result on TruthfulQA (AUC=0.478) establishes that angular geometry measures topical engagement rather than factual accuracy. SGI provides computationally efficient, theoretically grounded infrastructure for identifying responses that warrant verification in production RAG deployments.

Multimodal Large Language Models (MLLMs) show strong visual perception, yet remain limited in reasoning about space under changing viewpoints. We study this challenge as Perspective-Conditioned Spatial Reasoning (PCSR) in 360-degree omnidirectional images, where broad scene coverage reduces ambiguity from partial observations without eliminating the need for viewpoint-dependent inference. To assess this capability, we introduce PCSR-Bench, a diagnostic benchmark of 84,373 question-answer pairs from 2,600 omnidirectional images across 26 indoor environments. PCSR-Bench contains eight tasks spanning foundational perception (e.g., object counting, relative distance, and relative direction) and advanced PCSR, including compositional chains, egocentric rotation, perspective re-anchoring, ego-distortion, and limited-FOV visibility. We evaluate 14 representative MLLMs and observe a substantial perception-reasoning gap: accuracy reaches 57.59% on foundational relative direction, but drops to 13.49% on egocentric rotation, 7.13% on egocentric distortion, and 0.64% on open-ended compositional reasoning. To probe the plasticity of this gap, we conduct an RL-based diagnostic study on a 7B-scale model. Reward shaping improves a matched 7B baseline from 31.10% to 60.06% under a controlled setting, suggesting that PCSR is partial plasticity rather than being fully immutable. Still, the gains are task-selective, sensitive to reward design including both weight allocation and reward formulation, and partially dependent on the evaluation protocol. These results position PCSR as a key bottleneck in current MLLMs and highlight limited but meaningful room for recovery under targeted optimization.

In this paper, we investigate the behavior of gradient descent algorithms in physics-informed machine learning methods like PINNs, which minimize residuals connected to partial differential equations (PDEs). Our key result is that the difficulty in training these models is closely related to the conditioning of a specific differential operator. This operator, in turn, is associated to the Hermitian square of the differential operator of the underlying PDE. If this operator is ill-conditioned, it results in slow or infeasible training. Therefore, preconditioning this operator is crucial. We employ both rigorous mathematical analysis and empirical evaluations to investigate various strategies, explaining how they better condition this critical operator, and consequently improve training.

Fine-tuning on harmless data can partially undo behaviors acquired earlier in training. Safety can erode under benign post-alignment updates, unlearned capabilities can re-emerge, latent traits can transfer through apparently unrelated supervision, and related post-alignment fragility appears in other generative settings. We argue these phenomena are usefully viewed through a common training-history lens. Our hypothesis is geometric: large early training phases create dominant behavioral manifolds, while later alignment or specialization phases are shallower displacements from them. Subsequent fine-tuning can therefore inherit a persistent reversion component pointing back toward a witness of the dominant manifold. We call this the gravitational interpretation of fine-tuning reversion. Across our main settings, representational drift rapidly acquires a component along a history-defined reversion direction (v_rev). In our main track, alignment with v_rev rises from cos = 0.429 +/- 0.052 after the first update to 0.647 +/- 0.021 by step 20. Across 24 run-step pairs, every observed alignment exceeds the p99 of an isotropic activation-space null. We demonstrate that selectively blocking motion along v_rev changes the final alignment at T=100 from 0.648 +/- 0.009 to -0.211 +/- 0.021 and reduces harmfulness from 19.0% +/- 4.0% to 8.5% +/- 1.5% with little task cost. These results support v_rev as a causally relevant mediator of early post-alignment reversion in our setup. Importantly, we do not claim that v_rev is the unique safety direction, nor that the dominant manifold is directly observed; rather, we identify a robust, history-defined direction that explains and partially controls early reversion dynamics.

The angular synchronization problem aims to accurately estimate (up to a constant additive phase) a set of unknown angles theta_1, dots, theta_nin[0, 2pi) from m noisy measurements of their offsets theta_i-theta_j ;mod ; 2pi. Applications include, for example, sensor network localization, phase retrieval, and distributed clock synchronization. An extension of the problem to the heterogeneous setting (dubbed k-synchronization) is to estimate k groups of angles simultaneously, given noisy observations (with unknown group assignment) from each group. Existing methods for angular synchronization usually perform poorly in high-noise regimes, which are common in applications. In this paper, we leverage neural networks for the angular synchronization problem, and its heterogeneous extension, by proposing GNNSync, a theoretically-grounded end-to-end trainable framework using directed graph neural networks. In addition, new loss functions are devised to encode synchronization objectives. Experimental results on extensive data sets demonstrate that GNNSync attains competitive, and often superior, performance against a comprehensive set of baselines for the angular synchronization problem and its extension, validating the robustness of GNNSync even at high noise levels.

Recently, mobile manipulation has attracted increasing attention for enabling language-conditioned robotic control in household tasks. However, existing methods still face challenges in coordinating mobile base and manipulator, primarily due to two limitations. On the one hand, they fail to explicitly model the influence of the mobile base on manipulator control, which easily leads to error accumulation under high degrees of freedom. On the other hand, they treat the entire mobile manipulation process with the same visual observation modality (e.g., either all 2D or all 3D), overlooking the distinct multimodal perception requirements at different stages during mobile manipulation. To address this, we propose the Adaptive Coordination Diffusion Transformer (AC-DiT), which enhances mobile base and manipulator coordination for end-to-end mobile manipulation. First, since the motion of the mobile base directly influences the manipulator's actions, we introduce a mobility-to-body conditioning mechanism that guides the model to first extract base motion representations, which are then used as context prior for predicting whole-body actions. This enables whole-body control that accounts for the potential impact of the mobile base's motion. Second, to meet the perception requirements at different stages of mobile manipulation, we design a perception-aware multimodal conditioning strategy that dynamically adjusts the fusion weights between various 2D visual images and 3D point clouds, yielding visual features tailored to the current perceptual needs. This allows the model to, for example, adaptively rely more on 2D inputs when semantic information is crucial for action prediction, while placing greater emphasis on 3D geometric information when precise spatial understanding is required. We validate AC-DiT through extensive experiments on both simulated and real-world mobile manipulation tasks.

A widely used technique for improving policies is success conditioning, in which one collects trajectories, identifies those that achieve a desired outcome, and updates the policy to imitate the actions taken along successful trajectories. This principle appears under many names -- rejection sampling with SFT, goal-conditioned RL, Decision Transformers -- yet what optimization problem it solves, if any, has remained unclear. We prove that success conditioning exactly solves a trust-region optimization problem, maximizing policy improvement subject to a χ^2 divergence constraint whose radius is determined automatically by the data. This yields an identity: relative policy improvement, the magnitude of policy change, and a quantity we call action-influence -- measuring how random variation in action choices affects success rates -- are exactly equal at every state. Success conditioning thus emerges as a conservative improvement operator. Exact success conditioning cannot degrade performance or induce dangerous distribution shift, but when it fails, it does so observably, by hardly changing the policy at all. We apply our theory to the common practice of return thresholding, showing this can amplify improvement, but at the cost of potential misalignment with the true objective.

One crucial aspect of 3D head avatar reconstruction lies in the details of facial expressions. Although recent NeRF-based photo-realistic 3D head avatar methods achieve high-quality avatar rendering, they still encounter challenges retaining intricate facial expression details because they overlook the potential of specific expression variations at different spatial positions when conditioning the radiance field. Motivated by this observation, we introduce a novel Spatially-Varying Expression (SVE) conditioning. The SVE can be obtained by a simple MLP-based generation network, encompassing both spatial positional features and global expression information. Benefiting from rich and diverse information of the SVE at different positions, the proposed SVE-conditioned neural radiance field can deal with intricate facial expressions and achieve realistic rendering and geometry details of high-fidelity 3D head avatars. Additionally, to further elevate the geometric and rendering quality, we introduce a new coarse-to-fine training strategy, including a geometry initialization strategy at the coarse stage and an adaptive importance sampling strategy at the fine stage. Extensive experiments indicate that our method outperforms other state-of-the-art (SOTA) methods in rendering and geometry quality on mobile phone-collected and public datasets.

As an adaptive method, Shampoo employs a structured second-moment estimation, and its effectiveness has attracted growing attention. Prior work has primarily analyzed its estimation scheme through the Frobenius norm. Motivated by the natural connection between the second moment and a covariance matrix, we propose studying Shampoo's estimation as covariance estimation through the lens of Kullback-Leibler (KL) minimization. This alternative perspective reveals a previously hidden limitation, motivating improvements to Shampoo's design. Building on this insight, we develop a practical estimation scheme, termed KL-Shampoo, that eliminates Shampoo's reliance on Adam for stabilization, thereby removing the additional memory overhead introduced by Adam. Preliminary results show that KL-Shampoo improves Shampoo's performance, enabling it to stabilize without Adam and even outperform its Adam-stabilized variant, SOAP, in neural network pretraining.

Video generation models produce visually compelling results but systematically violate physical commonsense -- on VideoPhy-2, the best model achieves only 32.6% joint accuracy. We identify a specification bottleneck: text prompts are lossy compression of the physical world, omitting the parameters that fully determine dynamics, and no amount of model scaling can recover what was never specified. From this diagnosis we derive three properties that physics conditioning must satisfy -- sufficiency, dynamism, and verifiability -- and show that no existing approach satisfies all three. We present NEWTON, in which video generation is demoted from the system output to one action inside an agent's toolbox: a learned planner orchestrates physics-aware tools (keyframe generation, scientific computation, prompt refinement) to construct rich conditioning, and a verifier closes the loop for iterative re-planning. The planner is the sole trainable component, optimized on-policy via Flow-GRPO inside the live multi-turn loop. On VideoPhy-2, NEWTON improves joint accuracy from 21.4% to 29.7% on LTX-Video and from 30.7% to 37.4% on Veo-3.1, without modifying either generator. Our project page: https://Newton026.github.io/newton{https://Newton026.github.io/newton}

Feed-forward view synthesis models predict a novel view in a single pass with minimal 3D inductive bias. Existing works encode cameras as Plücker ray maps, which tie predictions to the arbitrary world coordinate gauge and make them sensitive to small camera transformations, thereby undermining geometric consistency. In this paper, we ask what inputs best condition a model for robust and consistent view synthesis. We propose projective conditioning, which replaces raw camera parameters with a target-view projective cue that provides a stable 2D input. This reframes the task from a brittle geometric regression problem in ray space to a well-conditioned target-view image-to-image translation problem. Additionally, we introduce a masked autoencoding pretraining strategy tailored to this cue, enabling the use of large-scale uncalibrated data for pretraining. Our method shows improved fidelity and stronger cross-view consistency compared to ray-conditioned baselines on our view-consistency benchmark. It also achieves state-of-the-art quality on standard novel view synthesis benchmarks.

Generalist manipulation policies increasingly take the form of action-chunking flow policies built on large pretrained backbones. Such chunks run open-loop, so the policy cannot react to sensory input arriving mid-execution, sacrificing reactivity. Replanning more often would restore it, but the perception-to-action pipeline (a large backbone plus multiple denoising steps) is too slow: this latency forbids frequent replanning and leaves committed actions stale, making such policies ill-suited for dynamic, closed-loop control. We present πR^2, which makes these policies reactive and real-time while retaining large backbones, expressive multi-modal policies, and multi-action prediction. Built on the per-position noise schedule of diffusion forcing, πR^2 contributes two ideas. First, it splits conditioning into a fast channel (proprioception, fresh every tick) and an asynchronously updated slow channel (vision-language features), so the policy reacts to proprioception within a chunk while tolerating stale vision. Second, a latency-adaptive flow schedule treats in-flight actions as inpainting conditioning and emits actions in one denoising step per call, letting one trained model adapt to varying hardware latency. Requiring minimal modification to existing architectures, πR^2 can be finetuned from a pretrained policy: applied to GR00T-N1.7 on a real xArm6+XHand platform, it replans closed-loop roughly 4times faster than the base policy (~25Hz on an A5000 GPU), acting on a fresh observation every 40ms. Across simulation and real-world manipulation tasks, πR^2 improves the success rate by up to 23% in simulation and 30% in the real world over the strongest baseline. Project page: https://pi-r2-flow.github.io/

The ever-growing scale of deep learning models and training data underscores the critical importance of efficient optimization methods. While preconditioned gradient methods such as Adam and AdamW are the de facto optimizers for training neural networks and large language models, structure-aware preconditioned optimizers like Shampoo and Muon, which utilize the matrix structure of gradients, have demonstrated promising evidence of faster convergence. In this paper, we introduce a unifying framework for analyzing "matrix-aware" preconditioned methods, which not only sheds light on the effectiveness of Muon and related optimizers but also leads to a class of new structure-aware preconditioned methods. A key contribution of this framework is its precise distinction between preconditioning strategies that treat neural network weights as vectors (addressing curvature anisotropy) versus those that consider their matrix structure (addressing gradient anisotropy). This perspective provides new insights into several empirical phenomena in language model pre-training, including Adam's training instabilities, Muon's accelerated convergence, and the necessity of learning rate warmup for Adam. Building upon this framework, we introduce PolarGrad, a new class of preconditioned optimization methods based on the polar decomposition of matrix-valued gradients. As a special instance, PolarGrad includes Muon with updates scaled by the nuclear norm of the gradients. We provide numerical implementations of these methods, leveraging efficient numerical polar decomposition algorithms for enhanced convergence. Our extensive evaluations across diverse matrix optimization problems and language model pre-training tasks demonstrate that PolarGrad outperforms both Adam and Muon.

Generative video models achieve high visual fidelity but often violate basic physical principles, limiting reliability in real-world settings. Prior attempts to inject physics rely on conditioning: frame-level signals are domain-specific and short-horizon, while global text prompts are coarse and noisy, missing fine-grained dynamics. We present PhysVid, a physics-aware local conditioning scheme that operates over temporally contiguous chunks of frames. Each chunk is annotated with physics-grounded descriptions of states, interactions, and constraints, which are fused with the global prompt via chunk-aware cross-attention during training. At inference, we introduce negative physics prompts (descriptions of locally relevant law violations) to steer generation away from implausible trajectories. On VideoPhy, PhysVid improves physical commonsense scores by approx 33% over baseline video generators, and by up to approx 8% on VideoPhy2. These results show that local, physics-aware guidance substantially increases physical plausibility in generative video and marks a step toward physics-grounded video models.

In sports analytics, accurately capturing both the 3D locations and rotations of body joints is essential for understanding an athlete's biomechanics. While Human Mesh Recovery (HMR) models can estimate joint rotations, they often exhibit lower accuracy in joint localization compared to 3D Human Pose Estimation (HPE) models. Recent work addressed this limitation by combining a 3D HPE model with inverse kinematics (IK) to estimate both joint locations and rotations. However, IK is computationally expensive. To overcome this, we propose a novel 2D-to-3D uplifting model that directly estimates 3D human poses, including joint rotations, in a single forward pass. We investigate multiple rotation representations, loss functions, and training strategies - both with and without access to ground truth rotations. Our models achieve state-of-the-art accuracy in rotation estimation, are 150 times faster than the IK-based approach, and surpass HMR models in joint localization precision.

Transforming complex actions into discrete skill abstractions has demonstrated strong potential for robotic manipulation. Existing approaches mainly leverage latent variable models, e.g., VQ-VAE, to learn skill abstractions through learned vectors (codebooks), while they suffer from codebook collapse and modeling the causal relationship between learned skills. To address these limitations, we present Skill Training with Augmented Rotation (STAR), a framework that advances both skill learning and composition to complete complex behaviors. Specifically, to prevent codebook collapse, we devise rotation-augmented residual skill quantization (RaRSQ). It encodes relative angles between encoder outputs into the gradient flow by rotation-based gradient mechanism. Points within the same skill code are forced to be either pushed apart or pulled closer together depending on gradient directions. Further, to capture the causal relationship between skills, we present causal skill transformer (CST) which explicitly models dependencies between skill representations through an autoregressive mechanism for coherent action generation. Extensive experiments demonstrate the superiority of STAR on both LIBERO benchmark and realworld tasks, with around 12\% improvement over the baselines.

High-fidelity and expressive controllable human animation is essential for content creation and digital avatar applications. However, existing methods face a dilemma between expressiveness and disentanglement. Mainstream 2D pose-conditioned approaches suffer from "motion-shape entanglement", leading to the leakage of the driving subject's body shape. Conversely, methods relying on 3D priors (e.g., SMPL) achieve geometric disentanglement but struggle to capture facial expressions and complex gestures, resulting in rigid animations. To this end, we propose EMOSH, a novel framework for high-fidelity controllable human video generation. First, an Expressive Human Model (EHM) is introduced as the core control representation. By explicitly disentangling shape and pose parameters, we fundamentally resolve the body shape leakage issue. Alongside this, a robust motion tracker is designed to accurately estimate EHM parameters from video. Second, we propose a Coarse-to-Fine Hybrid Motion Injection strategy, enabling more fine-grained control over expressions and gestures. Furthermore, we introduce a Spatially-Aligned Conditioning mechanism to bridge the domain gap between training and inference, improving identity consistency. Extensive experiments demonstrate that EMOSH outperforms previous methods in both self-driven and cross-driven scenarios, producing high-fidelity videos with vivid expressions while maintaining shape disentanglement.

Automatic image rotation estimation is a key preprocessing step in many vision pipelines. This task is challenging because angles have circular topology, creating boundary discontinuities that hinder standard regression methods. We present a comprehensive study of five circular-aware methods for global orientation estimation: direct angle regression with circular loss, classification via angular binning, unit-vector regression, phase-shifting coder, and circular Gaussian distribution. Using transfer learning from ImageNet-pretrained models, we systematically evaluate these methods across sixteen modern architectures by adapting their output heads for rotation-specific predictions. Our results show that probabilistic methods, particularly the circular Gaussian distribution, are the most robust across architectures, while classification achieves the best accuracy on well-matched backbones but suffers training instabilities on others. The best configuration (classification with EfficientViT-B3) achieves a mean absolute error (MAE) of 1.23° (mean across five independent runs) on the DRC-D dataset, while the circular Gaussian distribution with MambaOut Base achieves a virtually identical 1.24° with greater robustness across backbones. Training and evaluating our top-performing method-architecture combinations on COCO 2014, the best configuration reaches 3.71° MAE, improving substantially over prior work, with further improvement to 2.84° on the larger COCO 2017 dataset.

Novel view synthesis from a single input image is a challenging task, where the goal is to generate a new view of a scene from a desired camera pose that may be separated by a large motion. The highly uncertain nature of this synthesis task due to unobserved elements within the scene (i.e. occlusion) and outside the field-of-view makes the use of generative models appealing to capture the variety of possible outputs. In this paper, we propose a novel generative model capable of producing a sequence of photorealistic images consistent with a specified camera trajectory, and a single starting image. Our approach is centred on an autoregressive conditional diffusion-based model capable of interpolating visible scene elements, and extrapolating unobserved regions in a view, in a geometrically consistent manner. Conditioning is limited to an image capturing a single camera view and the (relative) pose of the new camera view. To measure the consistency over a sequence of generated views, we introduce a new metric, the thresholded symmetric epipolar distance (TSED), to measure the number of consistent frame pairs in a sequence. While previous methods have been shown to produce high quality images and consistent semantics across pairs of views, we show empirically with our metric that they are often inconsistent with the desired camera poses. In contrast, we demonstrate that our method produces both photorealistic and view-consistent imagery.

In recent years, Muon has emerged as the dominant method for training large language models, and transformers more broadly. The essential difference, when compared to standard gradient descent methods, is to replace the usual update matrix M=UΣV^top with its polar factor UV^top. In this work, we consider a class of Muon-like updates, where we replace the update M with UΣ^p V^top for some parameter p. We call this a "spectral-shaping" operation, and develop a theory of how to pick p which depends on (a) local curvature of the loss function, (b) noise stemming from stochastic gradients and label noise, and (c) training stage. Our theory and experimentation reveal a previously overlooked behavior: positive p helps early by emphasizing high-curvature directions and accelerating signal contraction, while mildly negative p helps later by reallocating update strength toward low-curvature directions that still contain useful training signals. Building on the insight, we propose DynMuon, an efficient dynamic spectral shaping method that schedules p from positive to mildly negative over training. Extensive experiments across model sizes, architectures, and training settings show that DynMuon consistently achieves lower validation loss than Muon, while requiring 10.6-26.5% fewer steps to reach the same target loss.

Generating videos of complex human motions such as flips, cartwheels, and martial arts remains challenging for current video diffusion models. Text-only conditioning is temporally ambiguous for fine-grained motion control, while explicit pose-based controls, though effective, require users to provide complete skeleton sequences that are costly to produce for long and dynamic actions. We propose a two-stage cascaded framework that addresses both limitations. First, an autoregressive text-to-skeleton model generates 2D pose sequences from natural language descriptions by predicting each joint conditioned on previously generated poses. This design captures long-range temporal dependencies and inter-joint coordination required for complex motions. Second, a pose-conditioned video diffusion model synthesizes videos from a reference image and the generated skeleton sequence. It employs DINO-ALF (Adaptive Layer Fusion), a multi-level reference encoder that preserves appearance and clothing details under large pose changes and self-occlusions. To address the lack of publicly available datasets for complex human motion video generation, we introduce a Blender-based synthetic dataset containing 2,000 videos with diverse characters performing acrobatic and stunt-like motions. The dataset provides full control over appearance, motion, and environment. It fills an important gap because existing benchmarks significantly under-represent acrobatic motions while web-collected datasets raise copyright and privacy concerns. Experiments on our synthetic dataset and the Motion-X Fitness benchmark show that our text-to-skeleton model outperforms prior methods on FID, R-precision, and motion diversity. Our pose-to-video model also achieves the best results among all compared methods on VBench metrics for temporal consistency, motion smoothness, and subject preservation.

Dexterous manipulation is physics-intensive and highly sensitive to modeling errors and perception noise, making sim-to-real transfer prohibitively challenging. Domain randomization (DR) is commonly used to improve the robustness of learned policies for such tasks, but conventional DR randomizes one instance per episode, offering very limited exposure to the variability of real-world dynamics. To this end, we propose Domain-Randomized Instance Set (DRIS), which represents and propagates a set of randomized instances simultaneously, providing richer approximation of uncertain dynamics and enabling policies to learn actions that account for multiple possible outcomes. Supported by theoretical analysis, we show that DRIS yields more robust policies and alleviates the need for real-world fine-tuning, even with a modest number of instances (e.g., 10). We demonstrate this on a challenging reactive catching task. Unlike traditional catching setups that use end-effectors designed to mechanically stabilize the object (e.g., curved or enclosing surfaces), our system uses a flat plate that offers no passive stabilization, making the task highly sensitive to noise and requiring rapid reactive motions. The learned policies exhibit strong robustness to uncertainties and achieve reliable zero-shot sim-to-real transfer.

Recent convolutional neural networks (CNNs) have led to impressive performance but often suffer from poor calibration. They tend to be overconfident, with the model confidence not always reflecting the underlying true ambiguity and hardness. In this paper, we propose angular visual hardness (AVH), a score given by the normalized angular distance between the sample feature embedding and the target classifier to measure sample hardness. We validate this score with an in-depth and extensive scientific study, and observe that CNN models with the highest accuracy also have the best AVH scores. This agrees with an earlier finding that state-of-art models improve on the classification of harder examples. We observe that the training dynamics of AVH is vastly different compared to the training loss. Specifically, AVH quickly reaches a plateau for all samples even though the training loss keeps improving. This suggests the need for designing better loss functions that can target harder examples more effectively. We also find that AVH has a statistically significant correlation with human visual hardness. Finally, we demonstrate the benefit of AVH to a variety of applications such as self-training for domain adaptation and domain generalization.

Multi-view image generation attracts particular attention these days due to its promising 3D-related applications, e.g., image viewpoint editing. Most existing methods follow a paradigm where a 3D representation is first synthesized, and then rendered into 2D images to ensure photo-consistency across viewpoints. However, such explicit bias for photo-consistency sacrifices photo-realism, causing geometry artifacts and loss of fine-scale details when these methods are applied to edit real images. To address this issue, we propose ray conditioning, a geometry-free alternative that relaxes the photo-consistency constraint. Our method generates multi-view images by conditioning a 2D GAN on a light field prior. With explicit viewpoint control, state-of-the-art photo-realism and identity consistency, our method is particularly suited for the viewpoint editing task.

Generating realistic human motion is a central yet unsolved challenge in video generation. While reinforcement learning (RL)-based post-training has driven recent gains in general video quality, extending it to human motion remains bottlenecked by a reward signal that cannot reliably score motion realism. Existing video rewards primarily rely on 2D perceptual signals, without explicitly modeling the 3D body state, contact, and dynamics underlying articulated human motion, and often assign high scores to videos with floating bodies or physically implausible movements. To address this, we propose PhyMotion, a structured, fine-grained motion reward that grounds recovered 3D human trajectories in a physics simulator and evaluates motion quality along multiple dimensions of physical feasibility. Concretely, we recover SMPL body meshes from generated videos, retarget them onto a humanoid in the MuJoCo physics simulator, and evaluate the resulting motion along three axes: kinematic plausibility, contact and balance consistency, and dynamic feasibility. Each component provides a continuous and interpretable signal tied to a specific aspect of motion quality, allowing the reward to capture which aspects of motion are physically correct or violated. Experiments show that PhyMotion achieves stronger correlation with human judgments than existing reward formulations. These gains carry over to RL-based post-training, where optimizing PhyMotion leads to larger and more consistent improvements than optimizing existing rewards, improving motion realism across both autoregressive and bidirectional video generators under both automatic metrics and blind human evaluation (+68 Elo gain). Ablations show that the three axes provide complementary supervision signals, while the reward preserves overall video generation quality with only modest training overhead.

Achieving generalized in-hand object rotation remains a significant challenge in robotics, largely due to the difficulty of transferring policies from simulation to the real world. The complex, contact-rich dynamics of dexterous manipulation create a "reality gap" that has limited prior work to constrained scenarios involving simple geometries, limited object sizes and aspect ratios, constrained wrist poses, or customized hands. We address this sim-to-real challenge with a novel framework that enables a single policy, trained in simulation, to generalize to a wide variety of objects and conditions in the real world. The core of our method is a joint-wise dynamics model that learns to bridge the reality gap by effectively fitting limited amount of real-world collected data and then adapting the sim policy's actions accordingly. The model is highly data-efficient and generalizable across different whole-hand interaction distributions by factorizing dynamics across joints, compressing system-wide influences into low-dimensional variables, and learning each joint's evolution from its own dynamic profile, implicitly capturing these net effects. We pair this with a fully autonomous data collection strategy that gathers diverse, real-world interaction data with minimal human intervention. Our complete pipeline demonstrates unprecedented generality: a single policy successfully rotates challenging objects with complex shapes (e.g., animals), high aspect ratios (up to 5.33), and small sizes, all while handling diverse wrist orientations and rotation axes. Comprehensive real-world evaluations and a teleoperation application for complex tasks validate the effectiveness and robustness of our approach. Website: https://meowuu7.github.io/DexNDM/

Rotary Positional Encodings (RoPE) are currently the most popular positional encodings used in modern language models. RoPE rotates two-dimensional chunks of query and key vectors, operating as a function of their relative positional offset. The position-wise rates of rotation in RoPE typically follow a geometric sequence specified by a fixed base-frequency hyperparameter. Prior work has improved performance by either increasing this parameter to slow rotation or by applying RoPE to only a subset of QK dimensions. In this work we modify RoPE by learning a scalar per frequency, treating frequencies as learnable parameters rather than hyperparameters. We validate Learned RoPE by training a ladder of language models from scratch, ranging from 52M to 2.5B parameters. We observe and analyze the emergence of a high-norm, positional LeRoPE band. LeRoPE consistently outperforms RoPE and partial RoPE across all scales, with RoPE requiring 3.4% more compute (FLOPs) to match LeRoPE at the largest scale.

Whole-arm manipulation involves direct contact with the environment while the robot completes a task by distributing contact across multiple links as contacts form, slide, and break. This setting breaks common implicit assumptions in many learning-based manipulation pipelines: arm configuration tightly couples motion and contact forces, contact state is partially observed under occlusion, and purely learned rollouts can become physically inconsistent under distribution shift because many multi-link contact configurations are sparsely represented in the data. To address this, we propose TACTIC (Tactile and Vision Conditioned Contact-Centric Control), a receding-horizon controller for whole-arm manipulation. TACTIC uses a contact-centric hybrid predictive model that combines RGB-D, distributed tactile sensing, and a compact 2D proximity representation. The model couples a learned, action-conditioned latent dynamics model with analytical kinematics through contact Jacobians, enabling rollouts of future contact configurations and interaction forces. TACTIC integrates these rollouts into a sampling-based MPC planner with contact-aware action sampling: contact Jacobian-based projections steer sampled action sequences toward force-modulating directions, and objectives defined over predicted proximity and interaction forces trade task progress against whole-arm force regulation. We evaluate TACTIC in simulation against state-of-the-art model-based and model-free methods, and perform ablations that isolate the contribution of each design choice. TACTIC consistently outperforms other methods. We further demonstrate real-world performance on a robot with distributed tactile sensing across three whole-arm manipulation tasks that require multi-contact trajectories: turning over and repositioning a manikin, and goal-reaching in a 3D dynamic maze. Website: https://emprise.cs.cornell.edu/tactic

Future- or return-conditioned supervised learning is an emerging paradigm for offline reinforcement learning (RL), where the future outcome (i.e., return) associated with an observed action sequence is used as input to a policy trained to imitate those same actions. While return-conditioning is at the heart of popular algorithms such as decision transformer (DT), these methods tend to perform poorly in highly stochastic environments, where an occasional high return can arise from randomness in the environment rather than the actions themselves. Such situations can lead to a learned policy that is inconsistent with its conditioning inputs; i.e., using the policy to act in the environment, when conditioning on a specific desired return, leads to a distribution of real returns that is wildly different than desired. In this work, we propose the dichotomy of control (DoC), a future-conditioned supervised learning framework that separates mechanisms within a policy's control (actions) from those beyond a policy's control (environment stochasticity). We achieve this separation by conditioning the policy on a latent variable representation of the future, and designing a mutual information constraint that removes any information from the latent variable associated with randomness in the environment. Theoretically, we show that DoC yields policies that are consistent with their conditioning inputs, ensuring that conditioning a learned policy on a desired high-return future outcome will correctly induce high-return behavior. Empirically, we show that DoC is able to achieve significantly better performance than DT on environments that have highly stochastic rewards and transition

Geometry-conditioned 3D scene generation enables the creation of 3D environments from user-provided geometry, offering direct control over scene structure and object layout. To generate such 3D scenes, current methods commonly adopt a three-stage design that first defines a view schedule, then synthesizes multi-view observations along the scheduled views, and finally reconstructs a 3D representation from the generated images. However, defining the view schedule becomes a major bottleneck for outdoor scenes, where large, unstructured, and unbounded geometry makes it difficult to obtain views that provide sufficient coverage while supporting stable generation. To address this bottleneck, we present SceneFrom3D, a framework that automatically schedules views from outdoor input geometries. SceneFrom3D constructs a directed generation graph whose nodes represent anchor views and whose edges represent interpolation trajectories, defining which views to synthesize, which view pairs to interpolate, and in which order generation should proceed. Beyond automatic view scheduling, SceneFrom3D further improves controllability through object-level conditioning, assigning each object an identity image for appearance guidance and a geometry-adherence parameter for region-wise control over the input geometry. Experiments demonstrate that SceneFrom3D achieves state-of-the-art geometry-conditioned outdoor 3D scene generation, producing high-quality scenes with controllable object appearance and geometry adherence.

Vision-language-action (VLA) models often treat main-view and wrist-view observations as parallel visual inputs, overlooking their distinct roles in robot manipulation. Fine-grained manipulation, however, benefits from anticipating how wrist-local interactions may evolve under the global task context. To address this limitation, we present World-to-Wrist VLA (W2-VLA), a VLA model for fine-grained robot manipulation with task-conditioned future wrist modeling. Given current multi-view observations and a task instruction, W2-VLA contextualizes a set of latent modeling tokens as a compact interface between the vision-language model and the wrist predictor. Conditioned on this interface and the observed wrist history, the predictor forecasts future wrist latents, which are transformed into future-aware context for action prediction. In addition, we introduce W2-CoT, a synthesis pipeline that produces structured annotations describing manipulation progress, physical transition cues, and wrist-local evidence. These annotations provide auxiliary supervision that shapes the task-conditioned latent interface. Experiments on LIBERO, RoboTwin 2.0, and real-world manipulation tasks demonstrate improved fine-grained and contact-sensitive manipulation across both single-arm and bimanual settings, while maintaining action-generation rates above 80 Hz.

Learning whole-body control for locomotion and arm motions in a single policy has challenges, as the two tasks have conflicting goals. For instance, efficient locomotion typically favors a horizontal base orientation, while end-effector tracking may benefit from base tilting to extend reachability. Additionally, current Reinforcement Learning (RL) approaches using a pose-based task specification lack the ability to directly control the end-effector velocity, making smoothly executing trajectories very challenging. To address these limitations, we propose an RL-based framework that allows for dynamic, velocity-aware whole-body end-effector control. Our method introduces a multi-critic actor architecture that decouples the reward signals for locomotion and manipulation, simplifying reward tuning and allowing the policy to resolve task conflicts more effectively. Furthermore, we design a twist-based end-effector task formulation that can track both discrete poses and motion trajectories. We validate our approach through a set of simulation and hardware experiments using a quadruped robot equipped with a robotic arm. The resulting controller can simultaneously walk and move its end-effector and shows emergent whole-body behaviors, where the base assists the arm in extending the workspace, despite a lack of explicit formulations.

Optimization analyses for cross-entropy training rely on local Taylor models of the loss to predict whether a proposed step will decrease the objective. These surrogates are reliable only inside the Taylor convergence radius of the true loss along the update direction. That radius is set not by real-line curvature alone but by the nearest complex singularity. For cross-entropy, the softmax partition function F=sum_j exp(z_j) has complex zeros -- ``ghosts of softmax'' -- that induce logarithmic singularities in the loss and cap this radius. To make this geometry usable, we derive closed-form expressions under logit linearization along the proposed update direction. In the binary case, the exact radius is ρ^*=δ^2+ π^2/Δ_a. In the multiclass case, we obtain the lower bound ρ_a=π/Δ_a, where Δ_a=max_k a_k-min_k a_k is the spread of directional logit derivatives a_k=nabla z_kcdot v. This bound costs one Jacobian-vector product and reveals what makes a step fragile: samples that are both near a decision flip and highly sensitive to the proposed direction tighten the radius. The normalized step size r=τ/ρ_a separates safe from dangerous updates. Across six tested architectures and multiple step directions, no model fails for r<1, yet collapse appears once rge 1. Temperature scaling confirms the mechanism: normalizing by ρ_a shrinks the onset-threshold spread from standard deviation 0.992 to 0.164. A controller that enforces τleρ_a survives learning-rate spikes up to 10{,} 000times in our tests, where gradient clipping still collapses. Together, these results identify a geometric constraint on cross-entropy optimization that operates through Taylor convergence rather than Hessian curvature.

The Rotary Position Embedding (RoPE) is widely used in the attention heads of many large language models (LLM). It rotates dimensions in the query and the key vectors by different angles according to their positions in the input sequence. For long context modeling, the range of positions may vary a lot, and thus RoPE rotates some dimensions by a great range of angles. We hypothesize that the wide range of rotation angles may prevent LLMs from utilizing those dimensions. To validate this hypothesis, we present a controlled experiment showing that applying RoPE causes low utility of certain dimensions. Our analyses on three LLMs also indicate that these dimensions do not help LLMs do long-context question answering.

This paper introduces an interdisciplinary framework called Machine Psychology, which merges principles from operant learning psychology with a specific Artificial Intelligence model, the Non-Axiomatic Reasoning System (NARS), to enhance Artificial General Intelligence (AGI) research. The core premise of this framework is that adaptation is crucial to both biological and artificial intelligence and can be understood through operant conditioning principles. The study assesses this approach via three operant learning tasks using OpenNARS for Applications (ONA): simple discrimination, changing contingencies, and conditional discrimination tasks. In the simple discrimination task, NARS demonstrated rapid learning, achieving perfect accuracy during both training and testing phases. The changing contingencies task showcased NARS's adaptability, as it successfully adjusted its behavior when task conditions were reversed. In the conditional discrimination task, NARS handled complex learning scenarios effectively, achieving high accuracy by forming and utilizing intricate hypotheses based on conditional cues. These findings support the application of operant conditioning as a framework for creating adaptive AGI systems. NARS's ability to operate under conditions of insufficient knowledge and resources, coupled with its sensorimotor reasoning capabilities, establishes it as a robust model for AGI. The Machine Psychology framework, by incorporating elements of natural intelligence such as continuous learning and goal-driven behavior, offers a scalable and flexible approach for real-world applications. Future research should investigate using enhanced NARS systems, more advanced tasks, and applying this framework to diverse, complex challenges to further progress the development of human-level AI.

Dexterous manipulation is a critical aspect of human capability, enabling interaction with a wide variety of objects. Recent advancements in learning from human demonstrations and teleoperation have enabled progress for robots in such ability. However, these approaches either require complex data collection such as costly human effort for eye-robot contact, or suffer from poor generalization when faced with novel scenarios. To solve both challenges, we propose a framework, DexH2R, that combines human hand motion retargeting with a task-oriented residual action policy, improving task performance by bridging the embodiment gap between human and robotic dexterous hands. Specifically, DexH2R learns the residual policy directly from retargeted primitive actions and task-oriented rewards, eliminating the need for labor-intensive teleoperation systems. Moreover, we incorporate test-time guidance for novel scenarios by taking in desired trajectories of human hands and objects, allowing the dexterous hand to acquire new skills with high generalizability. Extensive experiments in both simulation and real-world environments demonstrate the effectiveness of our work, outperforming prior state-of-the-arts by 40% across various settings.

In the field of portrait video generation, the use of single images to generate portrait videos has become increasingly prevalent. A common approach involves leveraging generative models to enhance adapters for controlled generation. However, control signals (e.g., text, audio, reference image, pose, depth map, etc.) can vary in strength. Among these, weaker conditions often struggle to be effective due to interference from stronger conditions, posing a challenge in balancing these conditions. In our work on portrait video generation, we identified audio signals as particularly weak, often overshadowed by stronger signals such as facial pose and reference image. However, direct training with weak signals often leads to difficulties in convergence. To address this, we propose V-Express, a simple method that balances different control signals through the progressive training and the conditional dropout operation. Our method gradually enables effective control by weak conditions, thereby achieving generation capabilities that simultaneously take into account the facial pose, reference image, and audio. The experimental results demonstrate that our method can effectively generate portrait videos controlled by audio. Furthermore, a potential solution is provided for the simultaneous and effective use of conditions of varying strengths.

Human dexterity is a hallmark of motor control. Our hands can rapidly synthesize new behaviors despite the complexity (multi-articular and multi-joints, with 23 joints controlled by more than 40 muscles) of musculoskeletal sensory-motor circuits. In this work, we take inspiration from how human dexterity builds on a diversity of prior experiences, instead of being acquired through a single task. Motivated by this observation, we set out to develop agents that can build upon their previous experience to quickly acquire new (previously unattainable) behaviors. Specifically, our approach leverages multi-task learning to implicitly capture task-agnostic behavioral priors (MyoDex) for human-like dexterity, using a physiologically realistic human hand model - MyoHand. We demonstrate MyoDex's effectiveness in few-shot generalization as well as positive transfer to a large repertoire of unseen dexterous manipulation tasks. Agents leveraging MyoDex can solve approximately 3x more tasks, and 4x faster in comparison to a distillation baseline. While prior work has synthesized single musculoskeletal control behaviors, MyoDex is the first generalizable manipulation prior that catalyzes the learning of dexterous physiological control across a large variety of contact-rich behaviors. We also demonstrate the effectiveness of our paradigms beyond musculoskeletal control towards the acquisition of dexterity in 24 DoF Adroit Hand. Website: https://sites.google.com/view/myodex

We present a novel approach named OmniControl for incorporating flexible spatial control signals into a text-conditioned human motion generation model based on the diffusion process. Unlike previous methods that can only control the pelvis trajectory, OmniControl can incorporate flexible spatial control signals over different joints at different times with only one model. Specifically, we propose analytic spatial guidance that ensures the generated motion can tightly conform to the input control signals. At the same time, realism guidance is introduced to refine all the joints to generate more coherent motion. Both the spatial and realism guidance are essential and they are highly complementary for balancing control accuracy and motion realism. By combining them, OmniControl generates motions that are realistic, coherent, and consistent with the spatial constraints. Experiments on HumanML3D and KIT-ML datasets show that OmniControl not only achieves significant improvement over state-of-the-art methods on pelvis control but also shows promising results when incorporating the constraints over other joints.

Action-conditioned world models (ACWMs) have shown strong promise for video prediction and decision-making. However, existing benchmarks are largely restricted to egocentric navigation or narrow, task-specific robotics datasets, offering only limited coverage of the rich physical interactions required for generalized world understanding. We introduce ACWM-Phys, a new benchmark for evaluating action-conditioned prediction under diverse physical dynamics in a clean, controllable simulation environment with a carefully designed action space. ACWM-Phys contains training and evaluation data spanning rigid-body dynamics, kinematics, deformable-object interactions, and particle dynamics. To evaluate both interpolation and generalization, we design in-distribution and out-of-distribution protocols with controlled shifts in interaction patterns or scene configurations. By building the benchmark in a fully controllable simulator, ACWM-Phys enables precise data collection, reproducible evaluation, and systematic analysis of model capabilities for physically grounded world modeling. Through systematic experiments on ACWM-DiT, we find that OoD generalization depends not only on the physical regime but also on effective task complexity: models generalize well on visually simple, low-dimensional interactions with clear geometric structure, but suffer larger drops on deformable contacts, high-dimensional control, and complex articulated motion. This suggests that the model still relies heavily on visual appearance patterns instead of fully learning the underlying physics. Ablations show that cross-attention improves high-dimensional action conditioning, causal VAEs outperform frame-wise encoders, and larger action spaces are harder to model but can improve generalization by providing richer control signals. These findings guide the design of physically grounded world models.

We propose a system for rearranging objects in a scene to achieve a desired object-scene placing relationship, such as a book inserted in an open slot of a bookshelf. The pipeline generalizes to novel geometries, poses, and layouts of both scenes and objects, and is trained from demonstrations to operate directly on 3D point clouds. Our system overcomes challenges associated with the existence of many geometrically-similar rearrangement solutions for a given scene. By leveraging an iterative pose de-noising training procedure, we can fit multi-modal demonstration data and produce multi-modal outputs while remaining precise and accurate. We also show the advantages of conditioning on relevant local geometric features while ignoring irrelevant global structure that harms both generalization and precision. We demonstrate our approach on three distinct rearrangement tasks that require handling multi-modality and generalization over object shape and pose in both simulation and the real world. Project website, code, and videos: https://anthonysimeonov.github.io/rpdiff-multi-modal/

Reinforcement learning provides a framework for learning control policies that can reproduce diverse motions for simulated characters. However, such policies often exploit unnatural high-frequency signals that are unachievable by humans or physical robots, making them poor representations of real-world behaviors. Existing work addresses this issue by adding a reward term that penalizes a large change in actions over time. This term often requires substantial tuning efforts. We propose to use the action Jacobian penalty, which penalizes changes in action with respect to the changes in simulated state directly through auto differentiation. This effectively eliminates unrealistic high-frequency control signals without task specific tuning. While effective, the action Jacobian penalty introduces significant computational overhead when used with traditional fully connected neural network architectures. To mitigate this, we introduce a new architecture called a Linear Policy Net (LPN) that significantly reduces the computational burden for calculating the action Jacobian penalty during training. In addition, a LPN requires no parameter tuning, exhibits faster learning convergence compared to baseline methods, and can be more efficiently queried during inference time compared to a fully connected neural network. We demonstrate that a Linear Policy Net, combined with the action Jacobian penalty, is able to learn policies that generate smooth signals while solving a number of motion imitation tasks with different characteristics, including dynamic motions such as a backflip and various challenging parkour skills. Finally, we apply this approach to create policies for dynamic motions on a physical quadrupedal robot equipped with an arm.

The Transformer architecture has revolutionized various regions since it was proposed, and its effectiveness largely depends on the ability to encode positional information. Traditional position encoding methods exhibit significant limitations due to lack of robustness and flexibility of position. Therefore, Rotary Positional Encoding (RoPE) was proposed to alleviate these issues, which integrates positional information by rotating the embeddings in the attention mechanism. However, RoPE requires manually defined rotation matrices with limited transformation space, constraining the model's capacity. In this work, we propose ComRoPE, which generalizes RoPE by defining it in terms of trainable commuting angle matrices. Specifically, we demonstrate that pairwise commutativity of these matrices is essential for RoPE to achieve scalability and positional robustness. We formally define the RoPE Equation, which is an essential condition that ensures consistent performance with position offsets. Based on the theoretical analysis, we present two types of trainable commuting angle matrices as sufficient solutions to the RoPE equation, which significantly improve performance, surpassing the current state-of-the-art method by 1.6% at training resolution and 2.9% at higher resolution on the ImageNet-1K dataset. Furthermore, our framework shows versatility in generalizing to existing RoPE formulations and offering new insights for future positional encoding research. To ensure reproducibility, the source code and instructions are available at https://github.com/Longin-Yu/ComRoPE

Understanding physical transformation processes is crucial for both human cognition and artificial intelligence systems, particularly from an egocentric perspective, which serves as a key bridge between humans and machines in action modeling. We define this modeling process as Egocentric Instructed Visual State Transition (EIVST), which involves generating intermediate frames that depict object transformations between initial and target states under a brief action instruction. EIVST poses two challenges for current generative models: (1) understanding the visual scenes of the initial and target states and reasoning about transformation steps from an egocentric view, and (2) generating a consistent intermediate transition that follows the given instruction while preserving object appearance across the two visual states. To address these challenges, we propose the EgoIn framework. It first infers the multi-step transition process between two given states using TransitionVLM, fine-tuned on our curated dataset to better adapt to this task and reduce hallucinated information. It then generates a sequence of frames based on transition conditions produced by the proposed Transition Conditioning module. Additionally, we introduce Object-aware Auxiliary Supervision to preserve consistent object appearance throughout the transition. Extensive experiments on human-object and robot-object interaction datasets demonstrate EgoIn's superior performance in generating semantically meaningful and visually coherent transformation sequences.

Data-driven surrogate models improve the efficiency of simulating continuous dynamical systems, yet their autoregressive rollouts are often limited by instability and spectral blow-up. While global regularization techniques can enforce contractive dynamics, they uniformly damp high-frequency features, introducing a contraction-dissipation dilemma. Furthermore, long-horizon trajectory optimization methods that explicitly correct drift are bottlenecked by memory constraints. In this work, we propose Jacobian-Adaptive Weighting for Stability (JAWS), a probabilistic regularization strategy designed to mitigate these limitations. By framing operator learning as Maximum A Posteriori (MAP) estimation with spatially heteroscedastic uncertainty, JAWS dynamically modulates the regularization strength based on local physical complexity. This allows the model to enforce contraction in smooth regions to suppress noise, while relaxing constraints near singular features to preserve gradients, effectively realizing a behavior similar to numerical shock-capturing schemes. Experiments demonstrate that this spatially-adaptive prior serves as an effective spectral pre-conditioner, which reduces the base operator's burden of handling high-frequency instabilities. This reduction enables memory-efficient, short-horizon trajectory optimization to match or exceed the long-term accuracy of long-horizon baselines. Evaluated on the 1D viscous Burgers' equation, our hybrid approach improves long-term stability, shock fidelity, and out-of-distribution generalization while reducing training computational costs.

Current Reinforcement Fine-tuning (RFT) paradigms for Large Language Models (LLMs) suffer from sample inefficiency due to the redundant exposure of identical queries under uniform data sampling. While previous work has explored curriculum learning via heuristic difficulty metrics, these strategies exhibit limitations by neglecting the intrinsic learning signals generated by the model itself, thus leading to suboptimal training regimes. In this paper, we identify a model-inherent signal termed angle concentration that effectively reflects an LLM's capacity to learn from specific data. We theoretically and empirically demonstrate a correlation between the angular distribution of token hidden state vectors and the resulting gradient, revealing a learning preference for data exhibiting higher angle concentration. Inspired by this finding, we propose GAIN-RL, a Gradient-driven Angle-Informed Navigated RL framework. By leveraging the model's intrinsic angle concentration signal, GAIN-RL dynamically selects training data in each epoch, ensuring consistently impactful gradient updates and thus significantly enhancing overall training efficiency. Empirical evaluations show that GAIN-RL (GRPO) achieves over a 2.5x acceleration in training efficiency across diverse mathematical and coding tasks and varying model scales. Furthermore, GAIN-RL (GRPO)'s efficient sampling yields data-efficient training, achieving better performance with half the original data compared to vanilla GRPO with full training data. Code is realsed at https://github.com/wangqinsi1/GAINRL/tree/main.

The polarization of an X-ray beam that produces electrons with velocity components perpendicular to the beam generates an azimuthal distribution of the ejected electrons. We present methods for simulating and for analyzing the angular dependence of electron detections which enable us to derive simple analytical expressions for useful statistical properties of observable data. The derivations are verified by simulations. While we confirm the results of previous work on this topic, we provide an extension needed for analytical treatment of the full range of possible polarization amplitudes.

Recent models for video generation have achieved remarkable progress and are now deployed in film, social media production, and advertising. Beyond their creative potential, such models also hold promise as world simulators for robotics and embodied decision making. Despite strong advances, however, current approaches still struggle to generate physically plausible object interactions and lack physics-grounded control mechanisms. To address this limitation, we introduce KineMask, an approach for physics-guided video generation that enables realistic rigid body control, interactions, and effects. Given a single image and a specified object velocity, our method generates videos with inferred motions and future object interactions. We propose a two-stage training strategy that gradually removes future motion supervision via object masks. Using this strategy we train video diffusion models (VDMs) on synthetic scenes of simple interactions and demonstrate significant improvements of object interactions in real scenes. Furthermore, KineMask integrates low-level motion control with high-level textual conditioning via predictive scene descriptions, leading to effective support for synthesis of complex dynamical phenomena. Extensive experiments show that KineMask achieves strong improvements over recent models of comparable size. Ablation studies further highlight the complementary roles of low- and high-level conditioning in VDMs. Our code, model, and data will be made publicly available.

The growing interest in language-conditioned robot manipulation aims to develop robots capable of understanding and executing complex tasks, with the objective of enabling robots to interpret language commands and manipulate objects accordingly. While language-conditioned approaches demonstrate impressive capabilities for addressing tasks in familiar environments, they encounter limitations in adapting to unfamiliar environment settings. In this study, we propose a general-purpose, language-conditioned approach that combines base skill priors and imitation learning under unstructured data to enhance the algorithm's generalization in adapting to unfamiliar environments. We assess our model's performance in both simulated and real-world environments using a zero-shot setting. In the simulated environment, the proposed approach surpasses previously reported scores for CALVIN benchmark, especially in the challenging Zero-Shot Multi-Environment setting. The average completed task length, indicating the average number of tasks the agent can continuously complete, improves more than 2.5 times compared to the state-of-the-art method HULC. In addition, we conduct a zero-shot evaluation of our policy in a real-world setting, following training exclusively in simulated environments without additional specific adaptations. In this evaluation, we set up ten tasks and achieved an average 30% improvement in our approach compared to the current state-of-the-art approach, demonstrating a high generalization capability in both simulated environments and the real world. For further details, including access to our code and videos, please refer to https://hk-zh.github.io/spil/

We use reinforcement learning (RL) to learn dexterous in-hand manipulation policies which can perform vision-based object reorientation on a physical Shadow Dexterous Hand. The training is performed in a simulated environment in which we randomize many of the physical properties of the system like friction coefficients and an object's appearance. Our policies transfer to the physical robot despite being trained entirely in simulation. Our method does not rely on any human demonstrations, but many behaviors found in human manipulation emerge naturally, including finger gaiting, multi-finger coordination, and the controlled use of gravity. Our results were obtained using the same distributed RL system that was used to train OpenAI Five. We also include a video of our results: https://youtu.be/jwSbzNHGflM

Can reinforcement learning with hard, verifiable rewards teach a compact language model to reason about physics, or does it primarily learn to pattern-match toward correct answers? We study this question by training a 1.5B-parameter reasoning model on beam statics, a classic engineering problem, using parameter-efficient RLVR with binary correctness rewards from symbolic solvers, without teacher-generated reasoning traces. The best BeamPERL checkpoint achieves a 66.7% improvement in Pass@1 over the base model. However, the learned competence is anisotropic: the model generalizes compositionally (more loads) but fails under topological shifts (moved supports) that require the same equilibrium equations. Intermediate checkpoints yield the strongest reasoning, while continued optimization degrades robustness while maintaining reward. These findings reveal a key limitation of outcome-level alignment: reinforcement learning with exact physics rewards induces procedural solution templates rather than internalization of governing equations. The precision of the reward signal - even when analytically exact - does not by itself guarantee transferable physical reasoning. Our results suggest that verifiable rewards may need to be paired with structured reasoning scaffolding to move beyond template matching toward robust scientific reasoning.

Inverse kinematics (IK) is a core operation in animation, robotics, and biomechanics: given Cartesian constraints, recover joint rotations under a known kinematic tree. In many real-time human avatar pipelines, the available signal per frame is a sparse set of tracked 3D joint positions, whereas animation systems require joint orientations to drive skinning. Recovering full orientations from positions is underconstrained, most notably because twist about bone axes is ambiguous, and classical IK solvers typically rely on iterative optimization that can be slow and sensitive to noisy inputs. We introduce IK-GAT, a lightweight graph-attention network that reconstructs full-body joint orientations from 3D joint positions in a single forward pass. The model performs message passing over the skeletal parent-child graph to exploit kinematic structure during rotation inference. To simplify learning, IK-GAT predicts rotations in a bone-aligned world-frame representation anchored to rest-pose bone frames. This parameterization makes the twist axis explicit and is exactly invertible to standard parent-relative local rotations given the kinematic tree and rest pose. The network uses a continuous 6D rotation representation and is trained with a geodesic loss on SO(3) together with an optional forward-kinematics consistency regularizer. IK-GAT produces animation-ready local rotations that can directly drive a rigged avatar or be converted to pose parameters of SMPL-like body models for real-time and online applications. With 374K parameters and over 650 FPS on CPU, IK-GAT outperforms VPoser-based per-frame iterative optimization without warm-start at significantly lower cost, and is robust to initial pose and input noise

Clinicians trace cephalometric radiographs following a structured anatomical workflow, yet no prior system encodes this into computation. We present a five-phase anatomy-guided pipeline producing confidence-weighted spatial priors that shape HRNet-W32 training, achieving 1.04 mm mean radial error on 25 landmarks across 1,502 radiographs from 7+ imaging devices. A training x inference prior matrix isolates the mechanism: anatomical priors maintain a 1% validation-to-test gap versus 88% without priors (1.94 mm), despite identical validation convergence. The matrix establishes that all trained models are inference-independent, the expanded architecture alone provides no benefit, random priors yield partial but unstable improvement (1.72 mm), and only image-specific anatomically correct priors produce the 1.04 mm result -- functioning as a training-time regularizer requiring no automated prior generation at deployment. Five-fold cross-validation (p=0.0015), patient-level permutation testing (p<0.0001, n=151), quantified Grad-CAM analysis (88% vs. 74% in-zone activation, p<0.001), and clinical measurement validation (skeletal classification kappa=0.79-0.84, zero Class II<->III reversals, ICC>0.95) provide converging evidence. Cross-domain experiments on echocardiography, cervical spine, and hand radiography support the hypothesis that prior effectiveness scales with the spatial entropy of the landmark distribution.

With the introduction of diffusion-based video generation techniques, audio-conditioned human video generation has recently achieved significant breakthroughs in both the naturalness of motion and the synthesis of portrait details. Due to the limited control of audio signals in driving human motion, existing methods often add auxiliary spatial signals to stabilize movements, which may compromise the naturalness and freedom of motion. In this paper, we propose an end-to-end audio-only conditioned video diffusion model named Loopy. Specifically, we designed an inter- and intra-clip temporal module and an audio-to-latents module, enabling the model to leverage long-term motion information from the data to learn natural motion patterns and improving audio-portrait movement correlation. This method removes the need for manually specified spatial motion templates used in existing methods to constrain motion during inference. Extensive experiments show that Loopy outperforms recent audio-driven portrait diffusion models, delivering more lifelike and high-quality results across various scenarios.

I study whether emotionally framed evaluation follow-ups change both the behavior and the calm-relative internal representations of small, locally deployed language models. Our main benchmark uses Qwen 3.5 0.8B on four impossible-constraint coding tasks and eight follow-up framings: calm, pressure, urgency, approval, shame, curiosity, encouragement, and threat. In the 0.8B eight-condition sweep (160 conversations), pressure produces the strongest shortcut markers (11/20 runs) and the clearest overfit pattern (3/20), while calm and curiosity preserve explicit honesty more often (7/20 and 6/20). For all seven non-baseline conditions, the corresponding calm-relative direction vectors peak at the final transformer layer. An exploratory PCA of the layer-23 direction vectors reveals a dominant first component (59.5% explained variance) aligned with a hand-labeled positive/negative split (cosine alignment 0.951); approval and urgency are nearly identical internally (cosine 0.957), whereas curiosity points away from urgency (-0.252). In a separate calm-vs.-pressure rerun used for scale comparison, Qwen 3.5 2B shows higher honest rates under calm framing and directionally consistent activation steering on a small 4-prompt A/B probe, whereas the 0.8B steering result reverses. I interpret these results as evidence for measurable prompt-sensitive control directions in small open models, while stopping short of claiming intrinsic emotional states.

Modern generative models typically rely on an adversarial critic, a prescribed noise-to-data path, or an autoregressive factorization. Instead, we show that a proper distributional energy can induce sample-level motion and provide direct regression supervision for a one-step generator. Three-Body Scattering Modeling (TBSM) for generation turns the energy distance into a constant-size per-projectile interaction: each projectile is attracted toward one real source and repelled from one independently generated source. Conditioned on the projectile and its condition, its expectation equals the 2-Wasserstein gradient-flow velocity of frac12D_E^2(P_θ,Q). A batch of B frozen-target events yields O(B) sample-level losses, each using one reference for its condition instead of the minibatch-wide all-pairs field used by methods such as Drifting Models. Tracking this conditional expectation online can reduce field noise. Using scattering in frozen image features, TBSM trains one-step generators on ImageNet-256, achieving FID{}=2.23 with pixel-space PixelDiT-XL and FID{}=1.63 with latent-space DiT-XL at NFE{}=1. We provide a design map relating diffusion-related supervision, Drift-like dynamics, and GAN-like objectives. These results establish tracked scattering as a route to high-dimensional one-step generation. Code: https://github.com/sp12138/TBSM.

Traditional deep learning models rely on methods such as softmax cross-entropy and ArcFace loss for tasks like classification and face recognition. These methods mainly explore angular features in a hyperspherical space, often resulting in entangled inter-class features due to dense angular data across many classes. In this paper, a new field of feature exploration is proposed known as HyperSpaceX which enhances class discrimination by exploring both angular and radial dimensions in multi-hyperspherical spaces, facilitated by a novel DistArc loss. The proposed DistArc loss encompasses three feature arrangement components: two angular and one radial, enforcing intra-class binding and inter-class separation in multi-radial arrangement, improving feature discriminability. Evaluation of HyperSpaceX framework for the novel representation utilizes a proposed predictive measure that accounts for both angular and radial elements, providing a more comprehensive assessment of model accuracy beyond standard metrics. Experiments across seven object classification and six face recognition datasets demonstrate state-of-the-art (SoTA) results obtained from HyperSpaceX, achieving up to a 20% performance improvement on large-scale object datasets in lower dimensions and up to 6% gain in higher dimensions.

Brachiation is the primary form of locomotion for gibbons and siamangs, in which these primates swing from tree limb to tree limb using only their arms. It is challenging to control because of the limited control authority, the required advance planning, and the precision of the required grasps. We present a novel approach to this problem using reinforcement learning, and as demonstrated on a finger-less 14-link planar model that learns to brachiate across challenging handhold sequences. Key to our method is the use of a simplified model, a point mass with a virtual arm, for which we first learn a policy that can brachiate across handhold sequences with a prescribed order. This facilitates the learning of the policy for the full model, for which it provides guidance by providing an overall center-of-mass trajectory to imitate, as well as for the timing of the holds. Lastly, the simplified model can also readily be used for planning suitable sequences of handholds in a given environment. Our results demonstrate brachiation motions with a variety of durations for the flight and hold phases, as well as emergent extra back-and-forth swings when this proves useful. The system is evaluated with a variety of ablations. The method enables future work towards more general 3D brachiation, as well as using simplified model imitation in other settings.

We present a class of novel optimisers for training neural networks that makes use of the Riemannian metric naturally induced when the loss landscape is embedded in higher-dimensional space. This is the same metric that underlies common visualisations of loss landscapes. By taking this geometric perspective literally and using the induced metric, we develop a new optimiser and compare it to existing methods, namely: SGD, Adam, AdamW, and Muon, across a range of tasks and architectures. Empirically, we conclude that this new class of optimisers is highly effective in low dimensional examples, and provides slight improvement over state-of-the-art methods for training neural networks. These new optimisers have theoretically desirable properties. In particular, the effective learning rate is automatically decreased in regions of high curvature acting as a smoothed out form of gradient clipping. Similarly, one variant of these optimisers can also be viewed as inducing an effective scheduled learning rate and decoupled weight decay is the natural choice from our geometric perspective. The basic method can be used to modify any existing preconditioning method. The new optimiser has a computational complexity comparable to that of Adam.

We present anyakrakusuma, an open-source Python library that solves the discrete static Schrödinger bridge problem, the entropically regularized counterpart of optimal transport, through a log-domain Sinkhorn--Knopp iteration and reconstructs the entropic interpolation between two empirical point clouds. The solver is paired with a diagnostic pipeline that characterizes the optimal coupling and the intermediate distributions through information-theoretic and geometric measures. We exercise the library on four idealized planar cases spanning a circle-to-circle dilation, a spiral-to-mixture fragmentation, a rigid reorientation of two moons, and a Lissajous-to-trefoil deformation. The log-domain formulation is necessary rather than merely convenient at the parameters studied, where the cost-to-regularization ratio reaches four hundred and the Gibbs kernel underflows double precision across most of its range; the iteration nonetheless attains a marginal residual of 10^{-9} and unit marginal fidelity in every case. Residual histories decay geometrically over approximately eight decades at per-iteration contraction factors between 0.966 and 0.976, which are local rates near the fixed point that lie many orders of magnitude below the worst-case Hilbert-metric bound. The covariance analysis recovers an imposed ninety-degree reorientation to within 0.07^circ, roughly forty times smaller than its uncertainty, across a masked interval of near-isotropy on which the principal axis is unobservable. The diagnostics are reported with explicit attention to the regimes in which each is well defined, including the differential entropy, which is meaningful only on the open interpolation interval. The presented cases are constructed rather than measured; quantitative application to empirical point clouds requires further study.

Our work presents extensive empirical evidence that layer rotation, i.e. the evolution across training of the cosine distance between each layer's weight vector and its initialization, constitutes an impressively consistent indicator of generalization performance. In particular, larger cosine distances between final and initial weights of each layer consistently translate into better generalization performance of the final model. Interestingly, this relation admits a network independent optimum: training procedures during which all layers' weights reach a cosine distance of 1 from their initialization consistently outperform other configurations -by up to 30% test accuracy. Moreover, we show that layer rotations are easily monitored and controlled (helpful for hyperparameter tuning) and potentially provide a unified framework to explain the impact of learning rate tuning, weight decay, learning rate warmups and adaptive gradient methods on generalization and training speed. In an attempt to explain the surprising properties of layer rotation, we show on a 1-layer MLP trained on MNIST that layer rotation correlates with the degree to which features of intermediate layers have been trained.

Vision-based 3D human motion capture from videos remains a challenge in computer vision. Traditional 3D pose estimation approaches often ignore the temporal consistency between frames, causing implausible and jittery motion. The emerging field of kinematics-based 3D motion capture addresses these issues by estimating the temporal transitioning between poses instead. A major drawback in current kinematics approaches is their reliance on Euler angles. Despite their simplicity, Euler angles suffer from discontinuity that leads to unstable motion reconstructions, especially in online settings where trajectory refinement is unavailable. Contrarily, quaternions have no discontinuity and can produce continuous transitions between poses. In this paper, we propose QuaMo, a novel Quaternion Motions method using quaternion differential equations (QDE) for human kinematics capture. We utilize the state-space model, an effective system for describing real-time kinematics estimations, with quaternion state and the QDE describing quaternion velocity. The corresponding angular acceleration is computed from a meta-PD controller with a novel acceleration enhancement that adaptively regulates the control signals as the human quickly changes to a new pose. Unlike previous work, our QDE is solved under the quaternion unit-sphere constraint that results in more accurate estimations. Experimental results show that our novel formulation of the QDE with acceleration enhancement accurately estimates 3D human kinematics with no discontinuity and minimal implausibilities. QuaMo outperforms comparable state-of-the-art methods on multiple datasets, namely Human3.6M, Fit3D, SportsPose and AIST. The code is available at https://github.com/cuongle1206/QuaMo

Contours or closed planar curves are common in many domains. For example, they appear as object boundaries in computer vision, isolines in meteorology, and the orbits of rotating machinery. In many cases when learning from contour data, planar rotations of the input will result in correspondingly rotated outputs. It is therefore desirable that deep learning models be rotationally equivariant. In addition, contours are typically represented as an ordered sequence of edge points, where the choice of starting point is arbitrary. It is therefore also desirable for deep learning methods to be equivariant under cyclic shifts. We present RotaTouille, a deep learning framework for learning from contour data that achieves both rotation and cyclic shift equivariance through complex-valued circular convolution. We further introduce and characterize equivariant non-linearities, coarsening layers, and global pooling layers to obtain invariant representations for downstream tasks. Finally, we demonstrate the effectiveness of RotaTouille through experiments in shape classification, reconstruction, and contour regression.

Is the standard weight decay in AdamW truly optimal? Although AdamW decouples weight decay from adaptive gradient scaling, a fundamental conflict remains: the Radial Tug-of-War. In deep learning, gradients tend to increase parameter norms to expand effective capacity while steering directions to learn features, whereas weight decay indiscriminately suppresses norm growth. This push--pull interaction induces radial oscillations, injecting noise into Adam's second-moment estimates and potentially degrading delicate tangential feature learning. We argue that magnitude and direction play distinct roles and should be decoupled in optimizer dynamics. We propose Orthogonal Dynamics Decoupling and instantiate it as AdamO: an SGD-style update handles the one-dimensional norm control, while Adam's adaptive preconditioning is confined to the tangential subspace. AdamO further incorporates curvature-adaptive radial step sizing and architecture-aware rules and projections for scale-invariant layers and low-dimensional parameters. Experiments on vision and language tasks show that AdamO improves generalization and stability over AdamW without introducing additional complex constraints.

Voxel-wise dose prediction is a critical yet challenging task in practical radiotherapy (RT) planning, as bespoke models trained from scratch often struggle to generalize across diverse clinical settings. Meanwhile, generative models trained on billion-scale datasets from vision domains have achieved impressive performance. Herein, we propose DiffKT3D, a unified Any2Any 3D diffusion framework that leverages prior knowledge from pretrained video diffusion models for efficient and clinically meaningful dose prediction. To enable flexible conditioning across multiple clinical modalities (CT, anatomical structures, body, beam settings, etc.), we introduce an Any2Any conditional paradigm utilizing modality-specific embeddings without cross-attention overhead. Further, we design a novel reinforcement learning (RL) post-training mechanism guided by a clinically-informed Scorecard explicitly tailored to institutional treatment preferences. Compared with winner of GDP-HMM challenge, DiffKT3D sets a new state-of-the-art in dose prediction by reducing voxel-level MAE from 2.07 to 1.93. In addition, DiffKT3D achieves superior image quality and preference match. These results demonstrate that transferring diffusion priors via modality-aware conditioning and clinically aligned RL post-training can provide a robust and generalizable solution for RT planning across various clinical scenarios.

Purpose: Six million people use crutches as mobile aids in the US. Rigid designs with no axial mobility limit sensory feedback and lead to secondary injury on the upper joints. Spring-loaded designs offer compliance but may compromise stability. We designed a biologically inspired tensegrity crutch with a compliant module aiming to achieve favorable mechanical properties. The terminal module was a pre-stressed self-tensile two-cell tensegrity structure. We compared the tensegrity crutch to commercial rigid and spring-loaded crutches in mechanical tests using axial loading, in overground straight and turning walking, and in participant experience. Methods: In human trials, healthy young adults (N=18) with no recent lower-body injury performed straight walking and turning trials at a comfortable self-selected pace. A knee blocker simulated unilateral injury of the dominant leg. After using each type of crutch, participants reported their perceived levels of effort, comfort, pain, stability, and usability. Results: Compared to the rigid design, both spring-loaded and tensegrity conditions reduced peak loading rates. The tensegrity design improved effort, comfort, pain, and usability. Spring-loaded crutches reduced perceived stability and walking speed. Conclusion: The biologically inspired tensegrity crutches were an overall improvement to existing designs. Simulations and mechanical testing suggest that nonlinear stiffness, ground-following, and force feedback are among the beneficial mechanical properties that underlie this improvement.

Humanoid loco-manipulation is often simplified into a stop-and-go process: walking to an object, stopping to manipulate it, and then resuming locomotion. It also commonly relies on low degree-of-freedom (DoF) end effectors that behave like an open-close grasp primitive. We introduce CoorDex, a learning pipeline that converts high-dimensional body and dexterous hand control into coordinated latent residual control, enabling high-DoF dexterous loco-manipulation on the move. Starting from simulated whole-body and hand demonstrations, CoorDex trains privileged motion tracking teachers for the humanoid body and dexterous hand, distills them into proprioception-conditioned latent priors, and uses the frozen priors as the action space for downstream residual reinforcement learning. A coordinated latent residual policy composes these priors through shared task context and separate body-hand residual heads, preserving natural whole-body motion while improving finger-level contact reliability. CoorDex enables a Unitree G1 humanoid with a 20-DoF WUJI hand to execute dexterous manipulation while in motion, including non-stop bottle grasping and carrying, fridge door opening on the move, and cube pick-and-turn. Ablations on the walk-grasp-carry task show that joint-space PPO, joint-space hand control, and monolithic latent prediction all fail under the same reward budget, while the latent-prior interface and coordinated residual structure make high-dimensional contact-rich loco-manipulation trainable. Project Page: https://skevinci.github.io/coordex/

Matrix-based optimizers have attracted growing interest for improving LLM training efficiency, with significant progress centered on orthogonalization/whitening based methods. While yielding substantial performance gains, a fundamental question arises: can we develop new paradigms beyond orthogonalization, pushing the efficiency frontier further? We present Adaptively Rotated Optimization (ARO, a new matrix optimization framework that treats gradient rotation as a first class design principle. ARO accelerates LLM training by performing normed steepest descent in a rotated coordinate system, where the rotation is determined by a novel norm-informed policy. This perspective yields update rules that go beyond existing orthogonalization and whitening optimizers, improving sample efficiency in practice. To make comparisons reliable, we propose a rigorously controlled benchmarking protocol that reduces confounding and bias. Under this protocol, ARO consistently outperforms AdamW (by 1.3 sim1.35times) and orthogonalization methods (by 1.1sim1.15times) in LLM pretraining at up to 8B activated parameters, and up to 8times overtrain budget, without evidence of diminishing returns. Finally, we discuss how ARO can be reformulated as a symmetry-aware optimizer grounded in rotational symmetries of residual streams, motivating advanced designs that enable computationally efficient exploitation of cross-layer/cross module couplings.

3D Human motion generation is pivotal across film, animation, gaming, and embodied intelligence. Traditional 3D motion synthesis relies on costly motion capture, while recent work shows that 2D videos provide rich, temporally coherent observations of human behavior. Existing approaches, however, either map high-level text descriptions to motion or rely solely on video conditioning, leaving a gap between generated dynamics and real-world motion statistics. We introduce MotionDuet, a multimodal framework that aligns motion generation with the distribution of video-derived representations. In this dual-conditioning paradigm, video cues extracted from a pretrained model (e.g., VideoMAE) ground low-level motion dynamics, while textual prompts provide semantic intent. To bridge the distribution gap across modalities, we propose Dual-stream Unified Encoding and Transformation (DUET) and a Distribution-Aware Structural Harmonization (DASH) loss. DUET fuses video-informed cues into the motion latent space via unified encoding and dynamic attention, while DASH aligns motion trajectories with both distributional and structural statistics of video features. An auto-guidance mechanism further balances textual and visual signals by leveraging a weakened copy of the model, enhancing controllability without sacrificing diversity. Extensive experiments demonstrate that MotionDuet generates realistic and controllable human motions, surpassing strong state-of-the-art baselines.

Chain-of-Thought (CoT) monitoring, in which automated systems monitor the CoT of an LLM, is a promising approach for effectively overseeing AI systems. However, the extent to which a model's CoT helps us oversee the model - the monitorability of the CoT - can be affected by training, for instance by the model learning to hide important features of its reasoning. We propose and empirically validate a conceptual framework for predicting when and why this occurs. We model LLM post-training as an RL environment where the reward decomposes into two terms: one term depending on final outputs and another term depending on the CoT. Our framework allows us to classify these two terms as "aligned", "orthogonal", or "in-conflict" before training. We predict that training with in-conflict terms will reduce monitorability, orthogonal terms will not affect it, and aligned terms will improve it. To validate our framework, we use it to classify a set of RL environments, train LLMs within those environments, and evaluate how training affects CoT monitorability. We find that (1) training with "in-conflict" reward terms reduces CoT monitorability and (2) optimizing in-conflict reward terms is difficult.

Adapting reasoning models to new tasks during post-training with only output-level supervision stalls under reinforcement learning from verifiable rewards (RLVR) when the initial success probability p_0 is small. Using the Tsallis q-logarithm, we define a loss family J_Q that interpolates between RLVR (at q{=}0, the exploitation pole) and the log-marginal-likelihood over latent trajectories (at q{=}1, the density-estimation pole). All members share the same per-example gradient direction, differing only by a scalar amplification P_{θ^{-q}} that reweights each instance independently of the learning rate. This amplification is the mechanism that addresses cold-start stalling: under gradient flow, the exploitation pole requires Ω(1{p_0}) time to escape cold start, while the density-estimation pole escapes in Θbig(log(1{p_0})big); intermediate q trades escape speed against noise memorization. Because P_θ is intractable, we derive two Monte Carlo estimators from the two factorizations of the gradient: Gradient-Amplified RL (GARL) samples from the prior and amplifies the RL gradient, and Posterior-Attenuated Fine-Tuning (PAFT) importance-resamples from the posterior and runs standard SFT. Both have bias Obig(q{M P_θ^{q+1}}big); GARL has lower variance, PAFT has semantically coherent gradients. On FinQA, HotPotQA, and MuSiQue, GARL at q{=}0.75 substantially mitigates cold-start stalling, escaping cold start where GRPO fails entirely. In warm start, GARL at low q dominates FinQA where training is stable; on HotPotQA and MuSiQue, GARL destabilizes during training, and PAFT at q{=}0.75 provides stable gradients (best overall on HotPotQA at 47.9 maj@16, +14.4 over GRPO).

The transfer of a star's angular momentum to its atmosphere is a topic of considerable and wide-ranging interest in astrophysics. This letter considers the effect of kinetic and magnetic turbulence on the solar wind's angular momentum. The effects are quantified in a theoretical framework that employs Reynolds-averaged mean field magnetohydrodynamics, allowing for fluctuations of arbitrary amplitude. The model is restricted to the solar equatorial (\(r-\phi\)) plane with axial symmetry, which permits the effect of turbulence to be expressed in analytical form as a modification to the classic Weber & Davis (1967) theory, dependent on the \(r,\phi\) shear component of the Reynolds stress tensor. A solar wind simulation with turbulence transport modeling and Parker Solar Probe observations at the Alfv\'en surface are employed to quantify this turbulent modification to the solar wind's angular momentum, which is found to be ~ 3% - 10% and tends to be negative. Implications for solar and stellar rotational evolution are discussed.

We present EgoAllo, a system for human motion estimation from a head-mounted device. Using only egocentric SLAM poses and images, EgoAllo guides sampling from a conditional diffusion model to estimate 3D body pose, height, and hand parameters that capture the wearer's actions in the allocentric coordinate frame of the scene. To achieve this, our key insight is in representation: we propose spatial and temporal invariance criteria for improving model performance, from which we derive a head motion conditioning parameterization that improves estimation by up to 18%. We also show how the bodies estimated by our system can improve the hands: the resulting kinematic and temporal constraints result in over 40% lower hand estimation errors compared to noisy monocular estimates. Project page: https://egoallo.github.io/

In this work, we study the evolution of the loss Hessian across many classification tasks in order to understand the effect the curvature of the loss has on the training dynamics. Whereas prior work has focused on how different learning rates affect the loss Hessian observed during training, we also analyze the effects of model initialization, architectural choices, and common training heuristics such as gradient clipping and learning rate warmup. Our results demonstrate that successful model and hyperparameter choices allow the early optimization trajectory to either avoid -- or navigate out of -- regions of high curvature and into flatter regions that tolerate a higher learning rate. Our results suggest a unifying perspective on how disparate mitigation strategies for training instability ultimately address the same underlying failure mode of neural network optimization, namely poor conditioning. Inspired by the conditioning perspective, we show that learning rate warmup can improve training stability just as much as batch normalization, layer normalization, MetaInit, GradInit, and Fixup initialization.

Finetuning large language models (LLMs) enables user-specific customization but introduces critical safety risks: even a few harmful examples can compromise safety alignment. A common mitigation strategy is to update the model more strongly on examples deemed safe, while downweighting or excluding those flagged as unsafe. However, because safety context can shift within a single example, updating the model equally on both harmful and harmless parts of a response is suboptimal-a coarse treatment we term static safety shaping. In contrast, we propose dynamic safety shaping (DSS), a framework that uses fine-grained safety signals to reinforce learning from safe segments of a response while suppressing unsafe content. To enable such fine-grained control during finetuning, we introduce a key insight: guardrail models, traditionally used for filtering, can be repurposed to evaluate partial responses, tracking how safety risk evolves throughout the response, segment by segment. This leads to the Safety Trajectory Assessment of Response (STAR), a token-level signal that enables shaping to operate dynamically over the training sequence. Building on this, we present STAR-DSS, guided by STAR scores, that robustly mitigates finetuning risks and delivers substantial safety improvements across diverse threats, datasets, and model families-all without compromising capability on intended tasks. We encourage future safety research to build on dynamic shaping principles for stronger mitigation against evolving finetuning risks.

Most 3D object generators focus on aesthetic quality, often neglecting physical constraints necessary in applications. One such constraint is that the 3D object should be self-supporting, i.e., remains balanced under gravity. Prior approaches to generating stable 3D objects used differentiable physics simulators to optimize geometry at test-time, which is slow, unstable, and prone to local optima. Inspired by the literature on aligning generative models to external feedback, we propose Direct Simulation Optimization (DSO), a framework to use the feedback from a (non-differentiable) simulator to increase the likelihood that the 3D generator outputs stable 3D objects directly. We construct a dataset of 3D objects labeled with a stability score obtained from the physics simulator. We can then fine-tune the 3D generator using the stability score as the alignment metric, via direct preference optimization (DPO) or direct reward optimization (DRO), a novel objective, which we introduce, to align diffusion models without requiring pairwise preferences. Our experiments show that the fine-tuned feed-forward generator, using either DPO or DRO objective, is much faster and more likely to produce stable objects than test-time optimization. Notably, the DSO framework works even without any ground-truth 3D objects for training, allowing the 3D generator to self-improve by automatically collecting simulation feedback on its own outputs.

Text and 2D-conditioning interfaces provide weak, ambiguous control over spatial transformations in image editing -- particularly under large object motions and camera changes. Prior work has used 3D primitives such as boxes, but only as loose conditioning signals indicating approximate object location rather than specifying the transformation. We instead use 3D boxes as structured specifications: the user provides the input and output boxes of the edit, casting editing as a well-posed geometry problem. This ``thinking in boxes'' interface, where each box face is color-coded to convey 3D orientation, gives precise control over translation, rotation, scaling, and viewpoint changes in real images while preserving scene and object identity, and recovering previously unseen object regions. To ground transformations in scene appearance, we introduce a depth-aligned planar floor as a global reference frame, shaded with depth-aware cues. Conditioned on this structure, an image generator produces consistent results under large transformations. Trained in two stages -- on synthetic multi-object scenes and a small set of real-world videos from Objectron -- the system generalizes to complex, in-the-wild real images. Our method operates directly on real photographs and substantially outperforms recent state-of-the-art methods on large 3D edits.

Recent methods for arbitrary-skeleton motion capture from monocular video follow a factorized pipeline, where a Video-to-Pose network predicts joint positions and an analytical inverse-kinematics (IK) stage recovers joint rotations. While effective, this design is inherently limited, since joint positions do not fully determine rotations and leave degrees of freedom such as bone-axis twist ambiguous, and the non-differentiable IK stage prevents the system from adapting to noisy predictions or optimizing for the final animation objective. In this work, we present the first fully end-to-end framework in which both Video-to-Pose and Pose-to-Rotation are learnable and jointly optimized. We observe that the ambiguity in pose-to-rotation mapping arises from missing coordinate system information: the same joint positions can correspond to different rotations under different rest poses and local axis conventions. To resolve this, we introduce a reference pose-rotation pair from the target asset, which, together with the rest pose, not only anchors the mapping but also defines the underlying rotation coordinate system. This formulation turns rotation prediction into a well-constrained conditional problem and enables effective learning. In addition, our model predicts joint positions directly from video without relying on mesh intermediates, improving both robustness and efficiency. Both stages share a skeleton-aware Global-Local Graph-guided Multi-Head Attention (GL-GMHA) module for joint-level local reasoning and global coordination. Experiments on Truebones Zoo and Objaverse show that our method reduces rotation error from ~17 degrees to ~10 degrees, and to 6.54 degrees on unseen skeletons, while achieving ~20x faster inference than mesh-based pipelines. Project page: https://animotionlab.github.io/MoCapAnythingV2/

Text-conditioned motion generation is a promising interface for programming humanoid robots, yet current generators are often trained on human motion datasets retargeted to robot morphologies. Although such data provides rich semantic and kinematic priors, it fails to capture the nuances of whole-body tracking controllers, including balance, contact dynamics, actuation limits, and controller-specific failure modes. As a result, generated motions can be semantically plausible but difficult or impossible for the robot to execute. We introduce TEXEDO, a test-time scaling framework for humanoid motion generation that improves motion quality without requiring a stronger underlying generator. Given a text prompt, TEXEDO samples multiple candidate motions from a pretrained text-conditioned generator and selects the best motion that is both executable and task-aligned. The reward model combines a dynamic feasibility verifier, distilled from whole-body tracking rollouts to predict physical executability, with a semantic alignment verifier that measures text-motion alignment in a learned co-embedding space. Our pipeline treats dynamic feasibility as a hard constraint and semantic alignment as the selection objective within the feasible set. Through large-scale simulation studies and real-world deployment on a Unitree G1 humanoid robot, we show that TEXEDO consistently improves both tracking fidelity and text alignment. These results demonstrate that grounded verification is an effective path toward deployable language-guided humanoid motion generation. Project website: https://jianuocao.github.io/TEXEDO/

In causal inference, estimating heterogeneous treatment effects (HTE) is critical for identifying how different subgroups respond to interventions, with broad applications in fields such as precision medicine and personalized advertising. Although HTE estimation methods aim to improve accuracy, how to provide explicit subgroup descriptions remains unclear, hindering data interpretation and strategic intervention management. In this paper, we propose CURLS, a novel rule learning method leveraging HTE, which can effectively describe subgroups with significant treatment effects. Specifically, we frame causal rule learning as a discrete optimization problem, finely balancing treatment effect with variance and considering the rule interpretability. We design an iterative procedure based on the minorize-maximization algorithm and solve a submodular lower bound as an approximation for the original. Quantitative experiments and qualitative case studies verify that compared with state-of-the-art methods, CURLS can find subgroups where the estimated and true effects are 16.1% and 13.8% higher and the variance is 12.0% smaller, while maintaining similar or better estimation accuracy and rule interpretability. Code is available at https://osf.io/zwp2k/.

Conditional motion generation has been extensively studied in computer vision, yet two critical challenges remain. First, while masked autoregressive methods have recently outperformed diffusion-based approaches, existing masking models lack a mechanism to prioritize dynamic frames and body parts based on given conditions. Second, existing methods for different conditioning modalities often fail to integrate multiple modalities effectively, limiting control and coherence in generated motion. To address these challenges, we propose Motion Anything, a multimodal motion generation framework that introduces an Attention-based Mask Modeling approach, enabling fine-grained spatial and temporal control over key frames and actions. Our model adaptively encodes multimodal conditions, including text and music, improving controllability. Additionally, we introduce Text-Music-Dance (TMD), a new motion dataset consisting of 2,153 pairs of text, music, and dance, making it twice the size of AIST++, thereby filling a critical gap in the community. Extensive experiments demonstrate that Motion Anything surpasses state-of-the-art methods across multiple benchmarks, achieving a 15% improvement in FID on HumanML3D and showing consistent performance gains on AIST++ and TMD. See our project website https://steve-zeyu-zhang.github.io/MotionAnything

Recovering ego-camera orientation from manipulation video is a prerequisite for disentangling hand motion from camera motion, a key step in imitation learning from egocentric demonstrations. The obvious approach, inferring orientation from scene geometry, fails when hands occlude the frame: VGGT, a 1B-parameter scene reconstruction model, scores worse than a constant predictor on the TACO benchmark. We identify an alternative visual concept that is present precisely when scene geometry is absent: kinematic coupling dynamics, the structured physical relationship between wrist motion and camera orientation imposed by the arm-shoulder-head chain. We find that this concept is compact (4D inter-wrist features outperform 126D full hand keypoints), temporal (requiring a GRU over short windows rather than per-frame retrieval), and physically grounded (transferring zero-shot across datasets because it is rooted in anatomy rather than scene appearance). Trained only on tabletop manipulation, WristCompass transfers zero-shot to Epic Kitchens cooking video, achieving 14.3^circ median geodesic error and approaching the performance of a 1B-parameter scene model at 200K GRU parameters.

Conditional diffusion and flow models routinely fail to satisfy the very constraints that define their task. For instance, a depth-conditioned model often produces images whose re-extracted depth disagrees with the input, even though the forward operator--the depth predictor defining the constraint--is available during both training and inference. Existing approaches generally fall into two categories: supervised models that treat the conditioning signal as a static cue and ignore alignment information at inference, and guidance-based methods that consult it through hand-tuned linear updates, typically trading fidelity to the condition against the plausibility of the generated sample. We argue that the fundamental gap in both paradigms is that the model is never trained to utilize its own alignment error. We introduce FlowBender, a closed-loop framework that treats this error as a first-class input, training the network to learn a correction policy conditioned on inference-time feedback. At each step, an unguided look-ahead pass estimates the clean signal, a task-specific deviation is computed via the forward operator, and a refinement pass consumes this signal to produce a corrected velocity. We propose several variants of FlowBender, including a gradient-based formulation for differentiable operators and a zero-order variant for non-differentiable settings such as JPEG compression. For efficient sampling, we introduce a prior-step shortcut that enables closed-loop correction at a minimal additional computational cost. Across image-to-image translation, restoration, and 3D mesh texturing, FlowBender consistently outperforms standard supervised baselines, alignment-loss-augmented training, and state-of-the-art inference-time guidance, improving fidelity and plausibility simultaneously rather than trading them against each other. Project page: https://flow-bender.github.io/

Autoregressive models accumulate error over long rollouts, yet at deployment there is no ground truth to measure it against. We train a single conditional latent diffusion model that steps a dynamical system forward or backward in time via a direction flag, and show that this bidirectionality supplies a measurement-free test-time error signal: rolling forward i steps and then backward i steps must return the model to its start, so the round-trip discrepancy C_i is a self-supervised proxy for the unobservable rollout error: no ensembles, no held-out data, no governing equations, for one extra rollout. We validate on compressible magnetohydrodynamics (MHD), an astrophysical turbulent radiative mixing layer, and natural face videos (CelebV-HQ). On held-out MHD trajectories, C_i ranks rollout error (Spearman 0.91-0.98 at fixed depth; 0.69 pm 0.16 within trajectories), and a simple calibrator fit on training rollouts predicts its magnitude to within 1.14times (68%) and 1.29times (95%) with near-nominal coverage - one nat beyond a depth-only predictor, transferring to all six decoded physical fields. The same signal flags the out-of-distribution Orszag-Tang vortex (AUROC 0.98; 1.0 by depth 10) exactly where sampling-dispersion baselines invert, and it cuts incurred error by 15% at 80% coverage - three times the depth-only baseline. Bidirectional training comes at negative cost, beating direction specialists in both directions, and the backward direction doubles as a fast inverse solver. On LE-PDE-UQ's turbulent Navier-Stokes benchmark, a single bidirectional model reaches accuracy within 1.3times of their ten-model ensemble at a tenth of the training cost, with the best training-free pixel-level calibration. Round-trip consistency turns reversibility into a practical trust signal for generative models.

We analyze cumulative parameter trajectories of transformer training under AdamW and identify a dominant low-dimensional drift direction ("backbone") that captures 60--80% of long-horizon displacement from initialization. This direction is highly stable over rolling training windows yet reorients gradually across phases, particularly following objective reweighting. Per-batch gradients exhibit near-noise-floor alignment with the backbone, whereas optimizer-integrated updates align strongly with it, indicating that the structure emerges from accumulated optimizer dynamics rather than instantaneous gradient geometry. Replacing AdamW with SGD-family optimizers eliminates this structure, and reducing β_2 smoothly degrades backbone dominance and reheating recoverability. Reheating experiments show that transverse probe modes can be transiently re-excited without substantially altering accumulated backbone drift. These results provide a trajectory-level characterization of optimizer-induced geometric structure in transformer training and shift attention from instantaneous gradient properties to cumulative update dynamics.

Realistic object interactions are crucial for creating immersive virtual experiences, yet synthesizing realistic 3D object dynamics in response to novel interactions remains a significant challenge. Unlike unconditional or text-conditioned dynamics generation, action-conditioned dynamics requires perceiving the physical material properties of objects and grounding the 3D motion prediction on these properties, such as object stiffness. However, estimating physical material properties is an open problem due to the lack of material ground-truth data, as measuring these properties for real objects is highly difficult. We present PhysDreamer, a physics-based approach that endows static 3D objects with interactive dynamics by leveraging the object dynamics priors learned by video generation models. By distilling these priors, PhysDreamer enables the synthesis of realistic object responses to novel interactions, such as external forces or agent manipulations. We demonstrate our approach on diverse examples of elastic objects and evaluate the realism of the synthesized interactions through a user study. PhysDreamer takes a step towards more engaging and realistic virtual experiences by enabling static 3D objects to dynamically respond to interactive stimuli in a physically plausible manner. See our project page at https://physdreamer.github.io/.

Recent studies illustrate the correlation between the angular momenta of cosmic structures and their Lagrangian properties. However, only baryons are observable and it is unclear whether they reliably trace the cosmic angular momenta. We study the Lagrangian mass distribution, spin correlation, and predictability of dark matter, gas, and stellar components of galaxy-halo systems using IllustrisTNG, and show that the primordial segregations between components are typically small. Their protoshapes are also similar in terms of the statistics of moment of inertia tensors. Under the common gravitational potential they are expected to exert the same tidal torque and the strong spin correlations are not destroyed by the nonlinear evolution and complicated baryonic effects, as confirmed by the high-resolution hydrodynamic simulations. We further show that their late-time angular momenta traced by total gas, stars, or the central galaxies, can be reliably reconstructed by the initial perturbations. These results suggest that baryonic angular momenta can potentially be used in reconstructing the parameters and models related to the initial perturbations.

Numerous works have recently integrated 3D camera control into foundational text-to-video models, but the resulting camera control is often imprecise, and video generation quality suffers. In this work, we analyze camera motion from a first principles perspective, uncovering insights that enable precise 3D camera manipulation without compromising synthesis quality. First, we determine that motion induced by camera movements in videos is low-frequency in nature. This motivates us to adjust train and test pose conditioning schedules, accelerating training convergence while improving visual and motion quality. Then, by probing the representations of an unconditional video diffusion transformer, we observe that they implicitly perform camera pose estimation under the hood, and only a sub-portion of their layers contain the camera information. This suggested us to limit the injection of camera conditioning to a subset of the architecture to prevent interference with other video features, leading to 4x reduction of training parameters, improved training speed and 10% higher visual quality. Finally, we complement the typical dataset for camera control learning with a curated dataset of 20K diverse dynamic videos with stationary cameras. This helps the model disambiguate the difference between camera and scene motion, and improves the dynamics of generated pose-conditioned videos. We compound these findings to design the Advanced 3D Camera Control (AC3D) architecture, the new state-of-the-art model for generative video modeling with camera control.

We present a zero-shot, training-free and optimization-free framework for generating 360 panoramic images and videos by directly injecting spherical priors into pre-trained diffusion transformers. Existing methods either rely on costly fine-tuning on scarce panoramic data that limits generalization, or leverage multi-step optimization that incurs prohibitive inference latency. We observe that contemporary generative models natively exhibit some panoramic priors from large-scale training. However, these emergent capabilities are insufficient, as the models fundamentally fail to satisfy the rigorous topological constraints imposed by equirectangular projection (ERP). We introduce a zero-shot and optimization-free approach that resolves these constraints at inference time. Spherical RoPE replaces standard rotary position embeddings: low-frequency channels are re-parameterized as 3D Cartesian coordinates to natively encode the spherical manifold, while high-frequency channels are harmonically quantized to enforce exact periodicity. Coupled with complementary Semantic Distortion classifier-free guidance (CFG) that explicitly steers geometry, we avoid retraining and inherit the full creative breadth of state-of-the-art models. Our approach generalizes across diverse backbones and 360 generation modalities. We demonstrate this across text-to-panorama using Flux.1, Flux.2, and LTX-Video backbones, achieving competitive performance against baselines, all while remaining training-free. Project page: https://orhir.github.io/SpheRoPE

Synthesizing controllable 6-DOF object manipulation trajectories in 3D environments is essential for enabling robots to interact with complex scenes, yet remains challenging due to the need for accurate spatial reasoning, physical feasibility, and multimodal scene understanding. Existing approaches often rely on 2D or partial 3D representations, limiting their ability to capture full scene geometry and constraining trajectory precision. We present GMT, a multimodal transformer framework that generates realistic and goal-directed object trajectories by jointly leveraging 3D bounding box geometry, point cloud context, semantic object categories, and target end poses. The model represents trajectories as continuous 6-DOF pose sequences and employs a tailored conditioning strategy that fuses geometric, semantic, contextual, and goaloriented information. Extensive experiments on synthetic and real-world benchmarks demonstrate that GMT outperforms state-of-the-art human motion and human-object interaction baselines, such as CHOIS and GIMO, achieving substantial gains in spatial accuracy and orientation control. Our method establishes a new benchmark for learningbased manipulation planning and shows strong generalization to diverse objects and cluttered 3D environments. Project page: https://huajian- zeng.github. io/projects/gmt/.

Unmodeled aerodynamic disturbances pose a key challenge for multirotor flight when multiple vehicles are in close proximity to each other. However, certain missions require two multirotors to approach each other within 1-2 body-lengths of each other and hold formation -- we consider one such practical instance: vertically docking two multirotors in the air. In this leader-follower setting, the follower experiences significant downwash interference from the leader in its final docking stages. To compensate for this, we employ a learnt downwash model online within an optimal feedback controller to accurately track a docking maneuver and then hold formation. Through real-world flights with different maneuvers, we demonstrate that this compensation is crucial for reducing the large vertical separation otherwise required by conventional/naive approaches. Our evaluations show a tracking error of less than 0.06m for the follower (a 3-4x reduction) when approaching vertically within two body-lengths of the leader. Finally, we deploy the complete system to effect a successful physical docking between two airborne multirotors in a single smooth planned trajectory.

World action models jointly predict future video and action during training, raising an open question about what role the future-prediction branch actually plays. A recent finding shows that this branch can be removed at inference with little to no loss on common manipulation benchmarks, suggesting that future information may act merely as a regularizer on the shared visual backbone. We propose instead that joint training induces an action-conditioned correction that privileged future observations impose on action denoising, and that current-only policies capture this correction only partially. Making the account precise, we formulate privileged foresight as a residual in the action-denoising direction -- the difference between what a model predicts given the true future and what it predicts given only the current frame -- and introduce Privileged Foresight Distillation (PFD), which transfers this residual from a training-time teacher into a small adapter on a current-only student. The teacher and student share the same backbone and differ only in the attention mask over video tokens; future video is never generated at inference. Controlled experiments verify that this gain reflects a genuine future-conditioned correction rather than a side effect of capacity or regularization. Empirically, PFD achieves consistent improvements on LIBERO and RoboTwin manipulation benchmarks while preserving the current-only inference interface at negligible added latency. This view reframes the role of future information in world action models: not as a target to predict, nor as a regularizer to absorb, but as a compressible correction to be distilled.

Recent advancements in Large Language Models (LLMs) have demonstrated enhanced reasoning capabilities, evolving from Chain-of-Thought (CoT) prompting to advanced, product-oriented solutions like OpenAI o1. During our re-implementation of this model, we noticed that in multimodal tasks requiring visual input (e.g., geometry problems), Multimodal LLMs (MLLMs) struggle to maintain focus on the visual information, in other words, MLLMs suffer from a gradual decline in attention to visual information as reasoning progresses, causing text-over-relied outputs. To investigate this, we ablate image inputs during long-chain reasoning. Concretely, we truncate the reasoning process midway, then re-complete the reasoning process with the input image removed. We observe only a ~2% accuracy drop on MathVista's test-hard subset, revealing the model's textual outputs dominate the following reasoning process. Motivated by this, we propose Take-along Visual Conditioning (TVC), a strategy that shifts image input to critical reasoning stages and compresses redundant visual tokens via dynamic pruning. This methodology helps the model retain attention to the visual components throughout the reasoning. Our approach achieves state-of-the-art performance on average across five mathematical reasoning benchmarks (+3.4% vs previous sota), demonstrating the effectiveness of TVC in enhancing multimodal reasoning systems.

Human motion capture from monocular videos has made significant progress in recent years. However, modern approaches often produce temporal artifacts, e.g. in form of jittery motion and struggle to achieve smooth and physically plausible motions. Explicitly integrating physics, in form of internal forces and exterior torques, helps alleviating these artifacts. Current state-of-the-art approaches make use of an automatic PD controller to predict torques and reaction forces in order to re-simulate the input kinematics, i.e. the joint angles of a predefined skeleton. However, due to imperfect physical models, these methods often require simplifying assumptions and extensive preprocessing of the input kinematics to achieve good performance. To this end, we propose a novel method to selectively incorporate the physics models with the kinematics observations in an online setting, inspired by a neural Kalman-filtering approach. We develop a control loop as a meta-PD controller to predict internal joint torques and external reaction forces, followed by a physics-based motion simulation. A recurrent neural network is introduced to realize a Kalman filter that attentively balances the kinematics input and simulated motion, resulting in an optimal-state dynamics prediction. We show that this filtering step is crucial to provide an online supervision that helps balancing the shortcoming of the respective input motions, thus being important for not only capturing accurate global motion trajectories but also producing physically plausible human poses. The proposed approach excels in the physics-based human pose estimation task and demonstrates the physical plausibility of the predictive dynamics, compared to state of the art. The code is available on https://github.com/cuongle1206/OSDCap

We present a neural framework for learning conditional optimal transport (OT) maps between probability distributions. Our approach introduces a conditioning mechanism capable of processing both categorical and continuous conditioning variables simultaneously. At the core of our method lies a hypernetwork that generates transport layer parameters based on these inputs, creating adaptive mappings that outperform simpler conditioning methods. Comprehensive ablation studies demonstrate the superior performance of our method over baseline configurations. Furthermore, we showcase an application to global sensitivity analysis, offering high performance in computing OT-based sensitivity indices. This work advances the state-of-the-art in conditional optimal transport, enabling broader application of optimal transport principles to complex, high-dimensional domains such as generative modeling and black-box model explainability.

Recently, it is shown that deploying a proper self-supervision is a prospective way to enhance the performance of supervised learning. Yet, the benefits of self-supervision are not fully exploited as previous pretext tasks are specialized for unsupervised representation learning. To this end, we begin by presenting three desirable properties for such auxiliary tasks to assist the supervised objective. First, the tasks need to guide the model to learn rich features. Second, the transformations involved in the self-supervision should not significantly alter the training distribution. Third, the tasks are preferred to be light and generic for high applicability to prior arts. Subsequently, to show how existing pretext tasks can fulfill these and be tailored for supervised learning, we propose a simple auxiliary self-supervision task, predicting localizable rotation (LoRot). Our exhaustive experiments validate the merits of LoRot as a pretext task tailored for supervised learning in terms of robustness and generalization capability. Our code is available at https://github.com/wjun0830/Localizable-Rotation.

High-quality teleoperation datasets are costly to collect, particularly for hard tasks. We observe that many tasks exhibit directional asymmetry: completing the forward hard task is difficult, whereas reversing it by relaxing or disrupting the environment is comparatively easy. This suggests that reversed easy-task trajectories can serve as a scalable supervision signal for the hard task, reducing the cost of manual demonstration collection. However, reversed data can be noisy, and directly training on it may yield suboptimal policies. To enable largely automated acquisition and effective use of reversed data, we propose a teleoperation-cost effective framework for hard policy learning via temporal reversal of easy tasks, consisting of three key components: a closed-loop data collection pipeline that alternates between hard-task and easy-task policies to autonomously reset the environment and generate diverse trajectories; a hierarchical data refinement pipeline that temporally inverts easy-task rollouts and filters low-quality motion using kinematic priors and a critic-guided advantage filter; and an iterative policy learning method that trains the hard-task policy using both initial reversed easy-task demonstrations and the filtered reversed data in a continuous online learning loop. By combining automated collection, hierarchical refinement, and iterative learning, our method enables scalable, reliable training of complex, high-precision manipulation tasks. Across two simulated benchmarks and real-robot experiments, we demonstrate that our method improves hard-task success rates with higher data efficiency and more stable training compared to reversal-based and reinforcement-learning baselines, without requiring extensive hard-task teleoperation.

Reinforcement Learning from Human Feedback has emerged as a standard for aligning diffusion models. However, we identify a fundamental limitation in the standard DPO formulation because it relies on the Bradley-Terry model to aggregate diverse evaluation axes like aesthetic quality and semantic alignment into a single scalar reward. This aggregation creates a reward conflict where the model is forced to unlearn desirable features of a specific dimension if they appear in a globally non-preferred sample. To address this issue, we propose Multi Reward Conditional DPO (MCDPO). This method resolves reward conflicts by introducing a disentangled Bradley-Terry objective. MCDPO explicitly injects a preference outcome vector as a condition during training, which allows the model to learn the correct optimization direction for each reward axis independently within a single network. We further introduce dimensional reward dropout to ensure balanced optimization across dimensions. Extensive experiments on Stable Diffusion 1.5 and SDXL demonstrate that MCDPO achieves superior performance on benchmarks. Notably, our conditional framework enables dynamic and multiple-axis control at inference time using Classifier Free Guidance to amplify specific reward dimensions without additional training or external reward models.

We present a novel adaptive optimization algorithm for large-scale machine learning problems. Equipped with a low-cost estimate of local curvature and Lipschitz smoothness, our method dynamically adapts the search direction and step-size. The search direction contains gradient information preconditioned by a well-scaled diagonal preconditioning matrix that captures the local curvature information. Our methodology does not require the tedious task of learning rate tuning, as the learning rate is updated automatically without adding an extra hyperparameter. We provide convergence guarantees on a comprehensive collection of optimization problems, including convex, strongly convex, and nonconvex problems, in both deterministic and stochastic regimes. We also conduct an extensive empirical evaluation on standard machine learning problems, justifying our algorithm's versatility and demonstrating its strong performance compared to other start-of-the-art first-order and second-order methods.

While multi-task learning based automatic radiology report generation (RRG) is widely adopted to ensure clinical consistency, most focus on architectural designs yet remain limited to coarse linear scalarization strategies. These strategies cannot effectively balance the hard constraints of discriminative clinical supervision with the smoothness requirements of report generation. To address these problems, we analyze the failure mechanism of linear scalarization from the perspective of gradient dynamics, utilizing the stochastic differential equation (SDE) framework to characterize it as a "Double Dilemma" of drift term deviation and diffusion term decay. Based on this, we propose a backbone-agnostic optimizer named Conflict-Averse Magnitude-Enhanced Gradient Descent (CAME-Grad). Through conflict-averse direction rectification and magnitude-enhanced energy injection, the algorithm not only ensures geometric validity, but also avoids local optimal solutions. Then, the adaptive gradient fusion mechanism is used to establish a dynamic balance between the theoretical optimal direction and the task-specific inductive bias. Experiments show that as a universal plug-and-play optimizer, CAME-Grad brings substantial and consistent improvements across eight diverse RRG methods, elevating overall clinical efficacy performance by an average of 2.3% on MIMIC-CXR and 1.9% on IU X-Ray. Our code is available at https://github.com/vpsg-research/CAME-Grad.

Long-horizon action-conditioned video generation aims to synthesize temporally coherent videos that follow complex action instructions over extended horizons, requiring procedural ordering, persistent action execution, and scene consistency beyond conventional TI2V's short-term fidelity. Existing single-shot video generation models typically operate in an open-loop manner, leading to incomplete action execution, hallucinated motions, and temporal drift. To address this, we propose SPIRAL, a closed-loop framework that performs sequential planning and iterative reflection for action-conditioned long-horizon video generation. Specifically, SPIRAL instantiates a think-act-reflect process: a PlanAgent decomposes high-level goals into sub-actions, which condition a VideoGenerator to synthesize each segment alongside a memory context, while a CriticAgent evaluates intermediate video segments to provide corrective feedback for iterative refinement. This closed-loop design further supports self-evolution by utilizing PlanAgent-proposed actions and CriticAgent-derived rewards for GRPO-based post-training to enhance the video generator's long-horizon consistency. Moreover, we introduce ActVideoGen-Dataset for task-specific training, and establish ActVideoGen-Bench as a dedicated evaluation suite for measuring action quality and temporal coherence. Experiments across multiple TI2V backbones alongside the self-evolving strategy show consistent gains on ActVideoGen-Bench and VBench, demonstrating the effectiveness of SPIRAL.

We introduce RotateIt, a system that enables fingertip-based object rotation along multiple axes by leveraging multimodal sensory inputs. Our system is trained in simulation, where it has access to ground-truth object shapes and physical properties. Then we distill it to operate on realistic yet noisy simulated visuotactile and proprioceptive sensory inputs. These multimodal inputs are fused via a visuotactile transformer, enabling online inference of object shapes and physical properties during deployment. We show significant performance improvements over prior methods and the importance of visual and tactile sensing.

Frame-wise action-controlled image-to-video generation is a promising paradigm for interactive world simulation, where each control signal should elicit an immediate visual response. However, maintaining visual fidelity and 3D consistency over long autoregressive rollouts remains challenging. Existing 3D-aware methods often suffer from catastrophic drift due to two impediments: information loss from Latent--RGB Cycling, where generated latents are repeatedly decoded to RGB and re-encoded for future conditioning, and the training--inference gap induced by the error-free hypothesis, where clean training memory fails to match prediction-corrupted inference memory. To address these challenges, we present Robust Dreamer, a memory-augmented framework built around how to design 3D memory and how to use it robustly. First, we introduce Latent Gaussian Memory, which anchors diffusion latents inherited from the generation process to Gaussian primitives and recalls them via latent-space Gaussian splatting. This provides dense, geometry-aware, view-aligned conditioning while avoiding accumulated degradation from repeated VAE conversion. Second, we propose Deviation Learning with Dynamic Deviation Archive, which synthesizes rollout-induced latent deviations through a one-step approximation, stores them by autoregressive stage and denoising timestamp, and injects them into historical memory during training. This exposes the generator to realistic corrupted memory states and teaches internal correction before inference. Experiments on ScanNet, DL3DV, and OmniWorldGame demonstrate state-of-the-art long-horizon performance.

With the rapidly increasing demand for oriented object detection, e.g. in autonomous driving and remote sensing, the recently proposed paradigm involving weakly-supervised detector H2RBox for learning rotated box (RBox) from the more readily-available horizontal box (HBox) has shown promise. This paper presents H2RBox-v2, to further bridge the gap between HBox-supervised and RBox-supervised oriented object detection. Specifically, we propose to leverage the reflection symmetry via flip and rotate consistencies, using a weakly-supervised network branch similar to H2RBox, together with a novel self-supervised branch that learns orientations from the symmetry inherent in visual objects. The detector is further stabilized and enhanced by practical techniques to cope with peripheral issues e.g. angular periodicity. To our best knowledge, H2RBox-v2 is the first symmetry-aware self-supervised paradigm for oriented object detection. In particular, our method shows less susceptibility to low-quality annotation and insufficient training data compared to H2RBox. Specifically, H2RBox-v2 achieves very close performance to a rotation annotation trained counterpart -- Rotated FCOS: 1) DOTA-v1.0/1.5/2.0: 72.31%/64.76%/50.33% vs. 72.44%/64.53%/51.77%; 2) HRSC: 89.66% vs. 88.99%; 3) FAIR1M: 42.27% vs. 41.25%.