new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Jun 2

When Does Multi-Agent RL Improve LLM Workflows? Workflow, Scale, and Policy-Sharing Tradeoffs

Multi-agent LLM workflows route inference through specialized roles to lift end-task accuracy, but jointly training those roles with reinforcement learning is unstable in ways that are poorly understood. We study when end-to-end RL training of multi-agent LLM workflows improves over their base models, comparing Shared-Policy training, where all roles update one policy, with Isolated-Policy training, where each role has its own parameters. Our experimental matrix spans Eval-Opt, Voting, and Orch-Workers workflows, math and code tasks, and three model scales (0.6B, 1.7B, 4B). We find that multi-agent RL usually improves over base models, but gains depend jointly on workflow, task, and scale, not on policy sharing alone. Isolated-Policy tends to reach higher peak accuracy yet more often falls off a terminal accuracy cliff, while Shared-Policy training does not eliminate failure; it redistributes failure into qualitatively different patterns. We then explain the strongest of these patterns through role-level gradient dynamics induced by workflow topology and policy routing: under Isolated-Policy, parallel same-role agents on shared prompts amplify per-role gradients and drive terminal degradation in Voting and Orch-Workers workflows; under Shared-Policy, asymmetric per-step gradient mass causes the shared policy to be captured by the dominant role, producing different failure signatures by task and workflow. Together, the empirical map and its underlying mechanisms show that policy sharing routes training pressure through different channels rather than offering uniform stability, making it a design choice with workflow- and task-conditional tradeoffs.

Cochain: Balancing Insufficient and Excessive Collaboration in LLM Agent Workflows

Large Language Models (LLMs) have demonstrated impressive performance in executing complex reasoning tasks. Chain-of-thought effectively enhances reasoning capabilities by unlocking the potential of large models, while multi-agent systems provide more comprehensive solutions by integrating the collective intelligence of multiple agents. However, both approaches face significant limitations. Single-agent with chain-of-thought, due to the inherent complexity of designing cross-domain prompts, faces collaboration challenges. Meanwhile, multi-agent systems consume substantial tokens and inevitably dilute the primary problem, which is particularly problematic in business workflow tasks. To address these challenges, we propose Cochain, a collaboration prompting framework that effectively solves the business workflow collaboration problem by combining knowledge and prompts at a reduced cost. Specifically, we construct an integrated knowledge graph that incorporates knowledge from multiple stages. Furthermore, by maintaining and retrieving a prompts tree, we can obtain prompt information relevant to other stages of the business workflow. We perform extensive evaluations of Cochain across multiple datasets, demonstrating that Cochain outperforms all baselines in both prompt engineering and multi-agent LLMs. Additionally, expert evaluation results indicate that the use of a small model in combination with Cochain outperforms GPT-4.

  • 9 authors
·
Feb 9

RefAgent: A Multi-agent LLM-based Framework for Automatic Software Refactoring

Large Language Models (LLMs) have substantially influenced various software engineering tasks. Indeed, in the case of software refactoring, traditional LLMs have shown the ability to reduce development time and enhance code quality. However, these LLMs often rely on static, detailed instructions for specific tasks. In contrast, LLM-based agents can dynamically adapt to evolving contexts and autonomously make decisions by interacting with software tools and executing workflows. In this paper, we explore the potential of LLM-based agents in supporting refactoring activities. Specifically, we introduce RefAgent, a multi-agent LLM-based framework for end-to-end software refactoring. RefAgent consists of specialized agents responsible for planning, executing, testing, and iteratively refining refactorings using self-reflection and tool-calling capabilities. We evaluate RefAgent on eight open-source Java projects, comparing its effectiveness against a single-agent approach, a search-based refactoring tool, and historical developer refactorings. Our assessment focuses on: (1) the impact of generated refactorings on software quality, (2) the ability to identify refactoring opportunities, and (3) the contribution of each LLM agent through an ablation study. Our results show that RefAgent achieves a median unit test pass rate of 90%, reduces code smells by a median of 52.5%, and improves key quality attributes (e.g., reusability) by a median of 8.6%. Additionally, it closely aligns with developer refactorings and the search-based tool in identifying refactoring opportunities, attaining a median F1-score of 79.15% and 72.7%, respectively. Compared to single-agent approaches, RefAgent improves the median unit test pass rate by 64.7% and the median compilation success rate by 40.1%. These findings highlight the promise of multi-agent architectures in advancing automated software refactoring.

  • 3 authors
·
Nov 4, 2025

Multi-Agent Teams Hold Experts Back

Multi-agent LLM systems are increasingly deployed as autonomous collaborators, where agents interact freely rather than execute fixed, pre-specified workflows. In such settings, effective coordination cannot be fully designed in advance and must instead emerge through interaction. However, most prior work enforces coordination through fixed roles, workflows, or aggregation rules, leaving open the question of how well self-organizing teams perform when coordination is unconstrained. Drawing on organizational psychology, we study whether self-organizing LLM teams achieve strong synergy, where team performance matches or exceeds the best individual member. Across human-inspired and frontier ML benchmarks, we find that -- unlike human teams -- LLM teams consistently fail to match their expert agent's performance, even when explicitly told who the expert is, incurring performance losses of up to 37.6%. Decomposing this failure, we show that expert leveraging, rather than identification, is the primary bottleneck. Conversational analysis reveals a tendency toward integrative compromise -- averaging expert and non-expert views rather than appropriately weighting expertise -- which increases with team size and correlates negatively with performance. Interestingly, this consensus-seeking behavior improves robustness to adversarial agents, suggesting a trade-off between alignment and effective expertise utilization. Our findings reveal a significant gap in the ability of self-organizing multi-agent teams to harness the collective expertise of their members.

  • 7 authors
·
Feb 8

FlowCompile: An Optimizing Compiler for Structured LLM Workflows

Structured LLM workflows, where specialized LLM sub-agents execute according to a predefined graph, have become a powerful abstraction for solving complex tasks. Optimizing such workflows, i.e., selecting configurations for each sub-agent to balance accuracy and latency, is challenging due to the combinatorial design space over model choices, reasoning budgets, and workflow structures. Existing cost-aware methods largely treat workflow optimization as a routing problem, selecting a configuration at inference time for each query according to the accuracy-latency objective used during training. We argue that structured LLM workflows can also be optimized from a compilation perspective: before deployment, the system can globally explore the workflow design space and construct a reusable set of workflow-level configurations spanning diverse accuracy-latency trade-offs. Drawing inspiration from machine learning compilers, we introduce FlowCompile, a structured LLM workflow compiler that performs compile-time design space exploration to identify a high-quality, reusable trade-off set. FlowCompile decomposes a workflow into sub-agents, profiles each sub-agent under diverse configurations, and composes these measurements through a structure-aware proxy to estimate workflow-level accuracy and latency. It then identifies diverse high-quality configurations in a single compile-time pass, without retraining or online adaptation. Experiments across diverse workflows and challenging benchmarks show that FlowCompile consistently outperforms heuristically optimized workflow configurations and routing-based baselines, delivering up to 6.4x speedup. The compiled configuration set further serves as a reusable optimization artifact, enabling flexible deployment under varying runtime preferences and supporting downstream selection or routing.

KVFlow: Efficient Prefix Caching for Accelerating LLM-Based Multi-Agent Workflows

Large language model (LLM) based agentic workflows have become a popular paradigm for coordinating multiple specialized agents to solve complex tasks. To improve serving efficiency, existing LLM systems employ prefix caching to reuse key-value (KV) tensors corresponding to agents' fixed prompts, thereby avoiding redundant computation across repeated invocations. However, current systems typically evict KV caches using a Least Recently Used (LRU) policy, which fails to anticipate future agent usage and often discards KV caches shortly before their reuse. This leads to frequent cache misses and substantial recomputation or swapping overhead. We present KVFlow, a workflow-aware KV cache management framework tailored for agentic workloads. KVFlow abstracts the agent execution schedule as an Agent Step Graph and assigns each agent a steps-to-execution value that estimates its temporal proximity to future activation. These values guide a fine-grained eviction policy at the KV node level, allowing KVFlow to preserve entries likely to be reused and efficiently manage shared prefixes in tree-structured caches. Moreover, KVFlow introduces a fully overlapped KV prefetching mechanism, which proactively loads required tensors from CPU to GPU in background threads for agents scheduled in the next step, thereby avoiding cache miss stalls during generation. Compared to SGLang with hierarchical radix cache, KVFlow achieves up to 1.83times speedup for single workflows with large prompts, and up to 2.19times speedup for scenarios with many concurrent workflows.

  • 9 authors
·
Jul 9, 2025

Beyond Rule-Based Workflows: An Information-Flow-Orchestrated Multi-Agents Paradigm via Agent-to-Agent Communication from CORAL

Most existing Large Language Model (LLM)-based Multi-Agent Systems (MAS) rely on predefined workflows, where human engineers enumerate task states in advance and specify routing rules and contextual injections accordingly. Such workflow-driven designs are essentially rule-based decision trees, which suffer from two fundamental limitations: they require substantial manual effort to anticipate and encode possible task states, and they cannot exhaustively cover the state space of complex real-world tasks. To address these issues, we propose an Information-Flow-Orchestrated Multi-Agent Paradigm via Agent-to-Agent (A2A) Communication from CORAL, in which a dedicated information flow orchestrator continuously monitors task progress and dynamically coordinates other agents through the A2A toolkit using natural language, without relying on predefined workflows. We evaluate our approach on the general-purpose benchmark GAIA, using the representative workflow-based MAS OWL as the baseline while controlling for agent roles and underlying models. Under the pass@1 setting, our method achieves 63.64% accuracy, outperforming OWL's 55.15% by 8.49 percentage points with comparable token consumption. Further case-level analysis shows that our paradigm enables more flexible task monitoring and more robust handling of edge cases. Our implementation is publicly available at: https://github.com/Coral-Protocol/Beyond-Rule-Based-Workflows

  • 8 authors
·
Jan 13

Continuum: Efficient and Robust Multi-Turn LLM Agent Scheduling with KV Cache Time-to-Live

Agentic LLM applications interleave LLM generation requests with tool calls. These tool calls break the continuity of the workflow by creating pauses between LLM requests, bringing many challenges for the serving system, especially under multi-turn scenarios. Each pause potentially causes KV cache eviction and extra waiting time before entering the continuous batch for the following LLM request. Since these pauses happen for each call, this problem becomes increasingly severe as turn number grow for agentic programs. Previous works either fail to incorporate information from the tool call, evicting KV cache that leads to repetitive prefill or loading, or ignore the continuity of a multi-turn program, creating waiting time between turns that increases per-request latency. We present Continuum, a serving system to optimize job completion time for multi-turn agent workloads by combining tool-aware KV cache timeout with program-level scheduling. By predicting tool call durations in agentic workflows, Continuum selectively pins the KV cache in GPU memory with a time-to-live value based on total turn number. When combined with program-level first-come-first-serve, Continuum prevents scheduling bubbles, preserves multi-turn continuity, and optimizes for throughput for complex agentic workflows. By modeling the variability of tool call and agent program continuity, Continuum outperforms state-of-the-art baselines. Our evaluation on real-world agentic workloads (SWE-Bench and BFCL) with Llama-3.1 8B/70B models shows that Continuum significantly improves the average job completion times, and remains performant across different hardware setups and DRAM offloading schemes. Preview code is available at: https://github.com/Hanchenli/vllm-continuum

  • 9 authors
·
Nov 3, 2025

PublicAgent: Multi-Agent Design Principles From an LLM-Based Open Data Analysis Framework

Open data repositories hold potential for evidence-based decision-making, yet are inaccessible to non-experts lacking expertise in dataset discovery, schema mapping, and statistical analysis. Large language models show promise for individual tasks, but end-to-end analytical workflows expose fundamental limitations: attention dilutes across growing contexts, specialized reasoning patterns interfere, and errors propagate undetected. We present PublicAgent, a multi-agent framework that addresses these limitations through decomposition into specialized agents for intent clarification, dataset discovery, analysis, and reporting. This architecture maintains focused attention within agent contexts and enables validation at each stage. Evaluation across five models and 50 queries derives five design principles for multi-agent LLM systems. First, specialization provides value independent of model strength--even the strongest model shows 97.5% agent win rates, with benefits orthogonal to model scale. Second, agents divide into universal (discovery, analysis) and conditional (report, intent) categories. Universal agents show consistent effectiveness (std dev 12.4%) while conditional agents vary by model (std dev 20.5%). Third, agents mitigate distinct failure modes--removing discovery or analysis causes catastrophic failures (243-280 instances), while removing report or intent causes quality degradation. Fourth, architectural benefits persist across task complexity with stable win rates (86-92% analysis, 84-94% discovery), indicating workflow management value rather than reasoning enhancement. Fifth, wide variance in agent effectiveness across models (42-96% for analysis) requires model-aware architecture design. These principles guide when and why specialization is necessary for complex analytical workflows while enabling broader access to public data through natural language interfaces.

  • 3 authors
·
Nov 4, 2025

Beyond the All-in-One Agent: Benchmarking Role-Specialized Multi-Agent Collaboration in Enterprise Workflows

Large language model (LLM) agents are increasingly expected to operate in enterprise environments, where work is distributed across specialized roles, permission-controlled systems, and cross-departmental procedures. However, existing enterprise benchmarks largely evaluate single agents with broad tool access, while existing multi-agent benchmarks rarely capture realistic enterprise constraints such as role specialization, access control, stateful business systems, and policy-based approvals. We introduce EntCollabBench, a benchmark for evaluating enterprise multi-agent collaboration. EntCollabBench simulates a permission-isolated organization with 11 role-specialized agents across six departments and contains two evaluation subsets: a Workflow subset, where agents collaboratively modify enterprise system states, and an Approval subset, where agents make policy-grounded decisions. Evaluation is based on execution traces, database state verification, and deterministic policy adjudication rather than natural-language response judging. Experiments with representative LLM agents show that current models still struggle with end-to-end enterprise collaboration, especially in delegation, context transfer, parameter grounding, workflow closure, and decision commitment. EntCollabBench provides a reproducible testbed for measuring and improving agent systems intended for realistic organizational environments.

  • 18 authors
·
May 8

UnityMAS-O: A General RL Optimization Framework for LLM-Based Multi-Agent Systems

LLM-based multi-agent systems decompose complex tasks into interacting roles, but most remain manually orchestrated by prompts, tools, and control rules, while agents are rarely optimized through a unified reinforcement learning interface. Existing RL post-training frameworks mainly target single-policy optimization and lack abstractions for user-defined multi-agent workflows, structured interaction, role-specific credit assignment, and configurable parameter sharing. We present UnityMAS-O, a general RL optimization framework for LLM-based multi-agent systems. UnityMAS-O treats the complete workflow as the optimization unit, rather than a single response or policy trajectory. It represents workflows through four first-class objects: logical agent roles, graph trajectories, user-defined rewards, and agent--model mappings. This decouples logical agents from physical model parameters, supporting full sharing, full separation, and partial sharing, with rewards assigned at role, turn, and trajectory levels. UnityMAS-O extends verl with a Ray-based star-topology runtime. A central controller executes workflows, invokes tools, records structured trajectories, and assembles rewards; model-local worker groups handle rollout, buffering, advantage computation, and distributed PPO-style updates. Users can define agents, workflows, model mappings, and rewards without rewriting the optimization infrastructure. We instantiate UnityMAS-O on retrieval-augmented QA, iterative agentic search, and reflective code generation. Across Natural Questions, HotpotQA, and held-out code tasks, multi-agent RL improves manually specified workflows after optimization, with especially large gains for smaller models and strict code all-passed metrics. These results show that UnityMAS-O can serve as a reusable substrate for converting diverse LLM-based multi-agent workflows into trainable multi-agent RL systems.

  • 17 authors
·
May 25

The Fellowship of the LLMs: Multi-Agent Workflows for Synthetic Preference Optimization Dataset Generation

This paper presents synthetic Preference Optimization (PO) datasets generated using multi-agent workflows and evaluates the effectiveness and potential of these workflows in the dataset generation process. PO dataset generation requires two modules: (1) response evaluation, and (2) response generation. In the response evaluation module, the responses from Large Language Models (LLMs) are evaluated and ranked - a task typically carried out by human annotators that we automate using LLMs. We assess the response evaluation module in a 2 step process. In step 1, we assess LLMs as evaluators using three distinct prompting strategies. In step 2, we apply the winning prompting strategy to compare the performance of LLM-as-a-Judge, LLMs-as-a-Jury, and LLM Debate. In each step, we use inter-rater agreement using Cohen's Kappa between human annotators and LLMs. For the response generation module, we compare different configurations for the LLM Feedback Loop using the identified LLM evaluator configuration. We use the win rate (the fraction of times a generation framework is selected as the best by an LLM evaluator) to determine the best multi-agent configuration for generation. After identifying the best configurations for both modules, we use models from the GPT, Gemma, and Llama families to generate our PO datasets using the above pipeline. We generate two types of PO datasets, one to improve the generation capabilities of individual LLM and the other to improve the multi-agent workflow. Our evaluation shows that GPT-4o-as-a-Judge is more consistent across datasets when the candidate responses do not include responses from the GPT family. Additionally, we find that the LLM Feedback Loop, with Llama as the generator and Gemma as the reviewer, achieves a notable 71.8% and 73.8% win rate over single-agent Llama and Gemma, respectively.

  • 5 authors
·
Aug 16, 2024

A Comprehensive Evaluation of LLM Reasoning: From Single-Model to Multi-Agent Paradigms

Large Language Models (LLMs) are increasingly deployed as reasoning systems, where reasoning paradigms - such as Chain-of-Thought (CoT) and multi-agent systems (MAS) - play a critical role, yet their relative effectiveness and cost-accuracy trade-offs remain poorly understood. In this work, we conduct a comprehensive and unified evaluation of reasoning paradigms, spanning direct single-model generation, CoT-augmented single-model reasoning, and representative MAS workflows, characterizing their reasoning performance across a diverse suite of closed-form benchmarks. Beyond overall performance, we probe role-specific capability demands in MAS using targeted role isolation analyses, and analyze cost-accuracy trade-offs to identify which MAS workflows offer a favorable balance between cost and accuracy, and which incur prohibitive overhead for marginal gains. We further introduce MIMeBench, a new open-ended benchmark that targets two foundational yet underexplored semantic capabilities - semantic abstraction and contrastive discrimination - thereby providing an alternative evaluation axis beyond closed-form accuracy and enabling fine-grained assessment of semantic competence that is difficult to capture with existing benchmarks. Our results show that increased structural complexity does not consistently lead to improved reasoning performance, with its benefits being highly dependent on the properties and suitability of the reasoning paradigm itself. The codes are released at https://gitcode.com/HIT1920/OpenLLMBench.

  • 7 authors
·
Jan 18

MAS-FIRE: Fault Injection and Reliability Evaluation for LLM-Based Multi-Agent Systems

As LLM-based Multi-Agent Systems (MAS) are increasingly deployed for complex tasks, ensuring their reliability has become a pressing challenge. Since MAS coordinate through unstructured natural language rather than rigid protocols, they are prone to semantic failures (e.g., hallucinations, misinterpreted instructions, and reasoning drift) that propagate silently without raising runtime exceptions. Prevailing evaluation approaches, which measure only end-to-end task success, offer limited insight into how these failures arise or how effectively agents recover from them. To bridge this gap, we propose MAS-FIRE, a systematic framework for fault injection and reliability evaluation of MAS. We define a taxonomy of 15 fault types covering intra-agent cognitive errors and inter-agent coordination failures, and inject them via three non-invasive mechanisms: prompt modification, response rewriting, and message routing manipulation. Applying MAS-FIRE to three representative MAS architectures, we uncover a rich set of fault-tolerant behaviors that we organize into four tiers: mechanism, rule, prompt, and reasoning. This tiered view enables fine-grained diagnosis of where and why systems succeed or fail. Our findings reveal that stronger foundation models do not uniformly improve robustness. We further show that architectural topology plays an equally decisive role, with iterative, closed-loop designs neutralizing over 40% of faults that cause catastrophic collapse in linear workflows. MAS-FIRE provides the process-level observability and actionable guidance needed to systematically improve multi-agent systems.

  • 5 authors
·
Feb 22

MetaGPT: Meta Programming for Multi-Agent Collaborative Framework

Recently, remarkable progress has been made in automated task-solving through the use of multi-agent driven by large language models (LLMs). However, existing LLM-based multi-agent works primarily focus on solving simple dialogue tasks, and complex tasks are rarely studied, mainly due to the LLM hallucination problem. This type of hallucination becomes cascading when naively chaining multiple intelligent agents, resulting in a failure to effectively address complex problems. Therefore, we introduce MetaGPT, an innovative framework that incorporates efficient human workflows as a meta programming approach into LLM-based multi-agent collaboration. Specifically, MetaGPT encodes Standardized Operating Procedures (SOPs) into prompts to enhance structured coordination. Subsequently, it mandates modular outputs, empowering agents with domain expertise comparable to human professionals, to validate outputs and minimize compounded errors. In this way, MetaGPT leverages the assembly line paradigm to assign diverse roles to various agents, thereby establishing a framework that can effectively and cohesively deconstruct complex multi-agent collaborative problems. Our experiments on collaborative software engineering benchmarks demonstrate that MetaGPT generates more coherent and correct solutions compared to existing chat-based multi-agent systems. This highlights the potential of integrating human domain knowledge into multi-agent systems, thereby creating new opportunities to tackle complex real-world challenges. The GitHub repository of this project is publicly available on:https://github.com/geekan/MetaGPT.

  • 13 authors
·
Aug 1, 2023

Rethinking the Value of Multi-Agent Workflow: A Strong Single Agent Baseline

Recent advances in LLM-based multi-agent systems (MAS) show that workflows composed of multiple LLM agents with distinct roles, tools, and communication patterns can outperform single-LLM baselines on complex tasks. However, most frameworks are homogeneous, where all agents share the same base LLM and differ only in prompts, tools, and positions in the workflow. This raises the question of whether such workflows can be simulated by a single agent through multi-turn conversations. We investigate this across seven benchmarks spanning coding, mathematics, general question answering, domain-specific reasoning, and real-world planning and tool use. Our results show that a single agent can reach the performance of homogeneous workflows with an efficiency advantage from KV cache reuse, and can even match the performance of an automatically optimized heterogeneous workflow. Building on this finding, we propose OneFlow, an algorithm that automatically tailors workflows for single-agent execution, reducing inference costs compared to existing automatic multi-agent design frameworks without trading off accuracy. These results position the single-LLM implementation of multi-agent workflows as a strong baseline for MAS research. We also note that single-LLM methods cannot capture heterogeneous workflows due to the lack of KV cache sharing across different LLMs, highlighting future opportunities in developing truly heterogeneous multi-agent systems.

  • 11 authors
·
Jan 17

GenoMAS: A Multi-Agent Framework for Scientific Discovery via Code-Driven Gene Expression Analysis

Gene expression analysis holds the key to many biomedical discoveries, yet extracting insights from raw transcriptomic data remains formidable due to the complexity of multiple large, semi-structured files and the need for extensive domain expertise. Current automation approaches are often limited by either inflexible workflows that break down in edge cases or by fully autonomous agents that lack the necessary precision for rigorous scientific inquiry. GenoMAS charts a different course by presenting a team of LLM-based scientists that integrates the reliability of structured workflows with the adaptability of autonomous agents. GenoMAS orchestrates six specialized LLM agents through typed message-passing protocols, each contributing complementary strengths to a shared analytic canvas. At the heart of GenoMAS lies a guided-planning framework: programming agents unfold high-level task guidelines into Action Units and, at each juncture, elect to advance, revise, bypass, or backtrack, thereby maintaining logical coherence while bending gracefully to the idiosyncrasies of genomic data. On the GenoTEX benchmark, GenoMAS reaches a Composite Similarity Correlation of 89.13% for data preprocessing and an F_1 of 60.48% for gene identification, surpassing the best prior art by 10.61% and 16.85% respectively. Beyond metrics, GenoMAS surfaces biologically plausible gene-phenotype associations corroborated by the literature, all while adjusting for latent confounders. Code is available at https://github.com/Liu-Hy/GenoMAS.

  • 3 authors
·
Jul 28, 2025 2

OdysseyBench: Evaluating LLM Agents on Long-Horizon Complex Office Application Workflows

Autonomous agents powered by large language models (LLMs) are increasingly deployed in real-world applications requiring complex, long-horizon workflows. However, existing benchmarks predominantly focus on atomic tasks that are self-contained and independent, failing to capture the long-term contextual dependencies and multi-interaction coordination required in realistic scenarios. To address this gap, we introduce OdysseyBench, a comprehensive benchmark for evaluating LLM agents on long-horizon workflows across diverse office applications including Word, Excel, PDF, Email, and Calendar. Our benchmark comprises two complementary splits: OdysseyBench+ with 300 tasks derived from real-world use cases, and OdysseyBench-Neo with 302 newly synthesized complex tasks. Each task requires agent to identify essential information from long-horizon interaction histories and perform multi-step reasoning across various applications. To enable scalable benchmark creation, we propose HomerAgents, a multi-agent framework that automates the generation of long-horizon workflow benchmarks through systematic environment exploration, task generation, and dialogue synthesis. Our extensive evaluation demonstrates that OdysseyBench effectively challenges state-of-the-art LLM agents, providing more accurate assessment of their capabilities in complex, real-world contexts compared to existing atomic task benchmarks. We believe that OdysseyBench will serve as a valuable resource for advancing the development and evaluation of LLM agents in real-world productivity scenarios. In addition, we release OdysseyBench and HomerAgents to foster research along this line.

  • 6 authors
·
Aug 12, 2025

From Prompt Injections to Protocol Exploits: Threats in LLM-Powered AI Agents Workflows

Autonomous AI agents powered by large language models (LLMs) with structured function-calling interfaces have dramatically expanded capabilities for real-time data retrieval, complex computation, and multi-step orchestration. Yet, the explosive proliferation of plugins, connectors, and inter-agent protocols has outpaced discovery mechanisms and security practices, resulting in brittle integrations vulnerable to diverse threats. In this survey, we introduce the first unified, end-to-end threat model for LLM-agent ecosystems, spanning host-to-tool and agent-to-agent communications, formalize adversary capabilities and attacker objectives, and catalog over thirty attack techniques. Specifically, we organized the threat model into four domains: Input Manipulation (e.g., prompt injections, long-context hijacks, multimodal adversarial inputs), Model Compromise (e.g., prompt- and parameter-level backdoors, composite and encrypted multi-backdoors, poisoning strategies), System and Privacy Attacks (e.g., speculative side-channels, membership inference, retrieval poisoning, social-engineering simulations), and Protocol Vulnerabilities (e.g., exploits in Model Context Protocol (MCP), Agent Communication Protocol (ACP), Agent Network Protocol (ANP), and Agent-to-Agent (A2A) protocol). For each category, we review representative scenarios, assess real-world feasibility, and evaluate existing defenses. Building on our threat taxonomy, we identify key open challenges and future research directions, such as securing MCP deployments through dynamic trust management and cryptographic provenance tracking; designing and hardening Agentic Web Interfaces; and achieving resilience in multi-agent and federated environments. Our work provides a comprehensive reference to guide the design of robust defense mechanisms and establish best practices for resilient LLM-agent workflows.

  • 5 authors
·
Jun 29, 2025

Empirical Research on Utilizing LLM-based Agents for Automated Bug Fixing via LangGraph

This paper presents a novel framework for automated code generation and debugging, designed to improve accuracy, efficiency, and scalability in software development. The proposed system integrates three core components LangGraph, GLM4 Flash, and ChromaDB within a four step iterative workflow to deliver robust performance and seamless functionality. LangGraph serves as a graph-based library for orchestrating tasks, providing precise control and execution while maintaining a unified state object for dynamic updates and consistency. It supports multi-agent, hierarchical, and sequential processes, making it highly adaptable to complex software engineering workflows. GLM4 Flash, a large language model, leverages its advanced capabilities in natural language understanding, contextual reasoning, and multilingual support to generate accurate code snippets based on user prompts. ChromaDB acts as a vector database for semantic search and contextual memory storage, enabling the identification of patterns and the generation of context-aware bug fixes based on historical data. The system operates through a structured four-step process: (1) Code Generation, which translates natural language descriptions into executable code; (2) Code Execution, which validates the code by identifying runtime errors and inconsistencies; (3) Code Repair, which iteratively refines buggy code using ChromaDB's memory capabilities and LangGraph's state tracking; and (4) Code Update, which ensures the code meets functional and performance requirements through iterative modifications.

  • 2 authors
·
Jan 29, 2025

Batch Query Processing and Optimization for Agentic Workflows

Large Language Models (LLMs) in agentic workflows combine multi-step reasoning, tool use, and collaboration across multiple specialized agents. Existing LLM serving engines optimize individual calls in isolation, while multi-agent frameworks focus on orchestration without system-level performance planning. As a result, repeated prompts, overlapping contexts, and concurrent executions create substantial redundancy and poor GPU utilization, especially in batch analytics scenarios. We introduce Halo, a system that brings batch query processing and optimization into agentic LLM workflows. Halo represents each workflow as a structured query plan DAG and constructs a consolidated graph for batched queries that exposes shared computation. Guided by a cost model that jointly considers prefill and decode costs, cache reuse, and GPU placement, Halo performs plan-level optimization to minimize redundant execution. Its runtime integrates adaptive batching, KV-cache sharing and migration, along with compute-communication overlap to maximize hardware efficiency. Evaluation across six benchmarks shows that Halo achieves up to 18.6x speedup for batch inference and 4.7x throughput improvement under online serving, scaling to workloads of tens of thousands of queries and complex graphs. These gains are achieved without compromising output quality. By unifying query optimization with LLM serving, Halo enables efficient agentic workflows in data analytics and decision-making applications.

  • 3 authors
·
Sep 2, 2025

From Knowledge to Action: Outcomes of the 2025 Large Language Model (LLM) Hackathon for Applications in Materials Science and Chemistry

Large language models (LLMs) are rapidly changing how researchers in materials science and chemistry discover, organize, and act on scientific knowledge. This paper analyzes a broad set of community-developed LLM applications in an effort to identify emerging patterns in how these systems can be used across the scientific research lifecycle. We organize the projects into two complementary categories: Knowledge Infrastructure, systems that structure, retrieve, synthesize, and validate scientific information; and Action Systems, systems that execute, coordinate, or automate scientific work across computational and experimental environments. The submissions reveal a shift from single-purpose LLM tools toward integrated, multi-agent workflows that combine retrieval, reasoning, tool use, and domain-specific validation. Prominent themes include retrieval-augmented generation as grounding infrastructure, persistent structured knowledge representations, multimodal and multilingual scientific inputs, and early progress toward laboratory-integrated closed-loop systems. Together, these results suggest that LLMs are evolving from general-purpose assistants into composable infrastructure for scientific reasoning and action. This work provides a community snapshot of that transition and a practical taxonomy for understanding emerging LLM-enabled workflows in materials science and chemistry.

  • 353 authors
·
May 3

Enhancing Model Context Protocol (MCP) with Context-Aware Server Collaboration

The Model Context Protocol (MCP) (MCP Community, 2025) has emerged as a widely used framework for enabling LLM-based agents to communicate with external tools and services. The original MCP implementation (Anthropic, 2024) relies on a Large Language Model (LLM) to decompose tasks and issue instructions to servers. In particular, the agents, models, and servers are stateless and do not have access to a global context. However, in tasks involving LLM-driven coordination, it is natural that a Shared Context Store (SCS) could improve the efficiency and coherence of multi-agent workflows by reducing redundancy and enabling knowledge transfer between servers. Thus, in this work, we design and assess the performance of a Context-Aware MCP (CA-MCP) that offloads execution logic to specialized MCP servers that read from and write to a shared context memory, allowing them to coordinate more autonomously in real time. In this design, context management serves as the central mechanism that maintains continuity across task executions by tracking intermediate states and shared variables, thereby enabling persistent collaboration among agents without repeated prompting. We present experiments showing that the CA-MCP can outperform the traditional MCP by reducing the number of LLM calls required for complex tasks and decreasing the frequency of response failures when task conditions are not satisfied. In particular, we conducted experiments on the TravelPlanner (Yang et al., 2024) and REALM-Bench (Geng & Chang, 2025) benchmark datasets and observed statistically significant results indicating the potential advantages of incorporating a shared context store via CA-MCP in LLM-driven multi-agent systems.

  • 2 authors
·
Jan 21

In-Context Distillation with Self-Consistency Cascades: A Simple, Training-Free Way to Reduce LLM Agent Costs

The world currently has an abundance of ideas for how to use new LLM agents, and developers seek to rapidly prototype and test new agentic designs. However, executing agents at scale using high-capacity LLMs incurs high inference costs. We propose a simple method for reducing LLM agent inference costs without incurring the development friction costs associated with LLM fine-tuning (long training cycles, optimization hyperparameter tweaking loops) or manual prompt engineering (laborious trial and error). Most importantly, we introduce in-context distillation, which adapts the idea of knowledge distillation (training a low cost-student model to mimic a high-cost teacher) to an in-context learning setting. Our approach retrieves relevant teacher demonstrations at each agent step and provides them to the student as in-context examples, enabling the student to imitate teacher behavior on-the-fly. We combine in-context distillation with the established idea of self-consistency cascades to know when the trust the student. This adaptive strategy realizes the cost benefits of model specialization while preserving the productivity of working with frozen models. On the multi-step embodied reasoning benchmark ALFWorld, our method matches teacher-level accuracy at 2.5\times lower cost, reducing per-episode costs from \0.059 to 0.024. The upfront demonstration cost amortizes after just 843 episodes, yielding cumulative savings exceeding \34,900 at deployment scale (1M episodes). On AppWorld, a complex agent benchmark requiring multi-step API workflows, we shift the Pareto frontier by achieving a 2times cost reduction$ at iso-accuracy. By reducing operational costs while maintaining rapid experimentation cycles with frozen models, our approach makes advanced agentic systems economically viable for a broader range of applications.

  • 5 authors
·
Dec 2, 2025

Towards LLM-enabled autonomous combustion research: A literature-aware agent for self-corrective modeling workflows

The rapid evolution of large language models (LLMs) is transforming artificial intelligence into autonomous research partners, yet a critical gap persists in complex scientific domains such as combustion modeling. Here, practical AI assistance requires the seamless integration of domain literature knowledge with robust execution capabilities for expertise-intensive tools such as computational fluid dynamics (CFD) codes. To bridge this gap, we introduce FlamePilot, an LLM agent designed to empower combustion modeling research through automated and self-corrective CFD workflows. FlamePilot differentiates itself through an architecture that leverages atomic tools to ensure the robust setup and execution of complex simulations in both OpenFOAM and extended frameworks such as DeepFlame. The system is also capable of learning from scientific articles, extracting key information to guide the simulation from initial setup to optimized results. Validation on a public benchmark shows FlamePilot achieved a perfect 1.0 executability score and a 0.438 success rate, surpassing the prior best reported agent scores of 0.625 and 0.250, respectively. Furthermore, a detailed case study on Moderate or Intense Low-oxygen Dilution (MILD) combustion simulation demonstrates its efficacy as a collaborative research copilot, where FlamePilot autonomously translated a research paper into a configured simulation, conducted the simulation, post-processed the results, proposed evidence-based refinements, and managed a multi-step parameter study to convergence under minimal human intervention. By adopting a transparent and interpretable paradigm, FlamePilot establishes a foundational framework for AI-empowered combustion modeling, fostering a collaborative partnership where the agent manages workflow orchestration, freeing the researcher for high-level analysis.

  • 5 authors
·
Jan 3

PAACE: A Plan-Aware Automated Agent Context Engineering Framework

Large Language Model (LLM) agents are increasingly deployed in complex, multi-step workflows involving planning, tool use, reflection, and interaction with external knowledge systems. These workflows generate rapidly expanding contexts that must be curated, transformed, and compressed to maintain fidelity, avoid attention dilution, and reduce inference cost. Prior work on summarization and query-aware compression largely ignores the multi-step, plan-aware nature of agentic reasoning. In this work, we introduce PAACE (Plan-Aware Automated Context Engineering), a unified framework for optimizing the evolving state of LLM agents through next-k-task relevance modeling, plan-structure analysis, instruction co-refinement, and function-preserving compression. PAACE comprises (1) PAACE-Syn, a large-scale generator of synthetic agent workflows annotated with stepwise compression supervision, and (2) PAACE-FT, a family of distilled, plan-aware compressors trained from successful teacher demonstrations. Experiments on long-horizon benchmarks (AppWorld, OfficeBench, and 8-Objective QA) demonstrate that PAACE consistently improves agent correctness while substantially reducing context load. On AppWorld, PAACE achieves higher accuracy than all baselines while lowering peak context and cumulative dependency. On OfficeBench and multi-hop QA, PAACE improves both accuracy and F1, achieving fewer steps, lower peak tokens, and reduced attention dependency. Distilled PAACE-FT retains 97 percent of the teacher's performance while reducing inference cost by over an order of magnitude, enabling practical deployment of plan-aware compression with compact models.

  • 1 authors
·
Dec 18, 2025

PhysicianBench: Evaluating LLM Agents in Real-World EHR Environments

We introduce PhysicianBench, a benchmark for evaluating LLM agents on physician tasks grounded in real clinical setting within electronic health record (EHR) environments. Existing medical agent benchmarks primarily focus on static knowledge recall, single-step atomic actions, or action intent without verifiable execution against the environment. As a result, they fail to capture the long-horizon, composite workflows that characterize real clinical systems. PhysicianBench comprises 100 long-horizon tasks adapted from real consultation cases between primary care and subspecialty physicians, with each task independently reviewed by a separate panel of physicians. Tasks are instantiated in an EHR environment with real patient records and accessed through the same standard APIs used by commercial EHR vendors. Tasks span 21 specialties (e.g., cardiology, endocrinology, oncology, psychiatry) and diverse workflow types (e.g., diagnosis interpretation, medication prescribing, treatment planning), requiring an average of 27 tool calls per task. Solving each task requires retrieving data across encounters, reasoning over heterogeneous clinical information, executing consequential clinical actions, and producing clinical documentation. Each task is decomposed into structured checkpoints (670 in total across the benchmark) capturing distinct stages of completion graded by task-specific scripts with execution-grounded verification. Across 13 proprietary and open-source LLM agents, the best-performing model achieves only 46% success rate (pass@1), while open-source models reach at most 19%, revealing a substantial gap between current agent capabilities and the demands of real-world clinical workflows. PhysicianBench provides a realistic and execution-grounded benchmark for measuring progress toward autonomous clinical agents.

Context Engineering for Multi-Agent LLM Code Assistants Using Elicit, NotebookLM, ChatGPT, and Claude Code

Large Language Models (LLMs) have shown promise in automating code generation and software engineering tasks, yet they often struggle with complex, multi-file projects due to context limitations and knowledge gaps. We propose a novel context engineering workflow that combines multiple AI components: an Intent Translator (GPT-5) for clarifying user requirements, an Elicit-powered semantic literature retrieval for injecting domain knowledge, NotebookLM-based document synthesis for contextual understanding, and a Claude Code multi-agent system for code generation and validation. Our integrated approach leverages intent clarification, retrieval-augmented generation, and specialized sub-agents orchestrated via Claude's agent framework. We demonstrate that this method significantly improves the accuracy and reliability of code assistants in real-world repositories, yielding higher single-shot success rates and better adherence to project context than baseline single-agent approaches. Qualitative results on a large Next.js codebase show the multi-agent system effectively plans, edits, and tests complex features with minimal human intervention. We compare our system with recent frameworks like CodePlan, MASAI, and HyperAgent, highlighting how targeted context injection and agent role decomposition lead to state-of-the-art performance. Finally, we discuss the implications for deploying LLM-based coding assistants in production, along with lessons learned on context management and future research directions.

  • 1 authors
·
Aug 9, 2025

Agent Memory Below the Prompt: Persistent Q4 KV Cache for Multi-Agent LLM Inference on Edge Devices

Multi-agent LLM systems on edge devices face a memory management problem: device RAM is too small to hold every agent's KV cache simultaneously. On Apple M4 Pro with 10.2 GB of cache budget, only 3 agents fit at 8K context in FP16. A 10-agent workflow must constantly evict and reload caches. Without persistence, every eviction forces a full re-prefill through the model -- 15.7 seconds per agent at 4K context. We address this by persisting each agent's KV cache to disk in 4-bit quantized format and reloading it directly into the attention layer, eliminating redundant O(n) prefill computation via direct cache restoration. The system comprises three components: a block pool providing per-agent isolated Q4 KV caches in safetensors format, a BatchQuantizedKVCache for concurrent inference over multiple agents' quantized caches, and cross-phase context injection that accumulates attention state across conversation phases without re-computation. Evaluated on three architectures (Gemma 3 12B, dense GQA, 48 layers; DeepSeek-Coder-V2-Lite 16B, MoE MLA, 27 layers; Llama 3.1 8B, dense GQA, 32 layers), cache restoration reduces time-to-first-token by up to 136x (Gemma: 22--136x at 4K--32K; DeepSeek: 11--76x at 4K--32K; Llama: 24--111x at 4K--16K; 3--10x at 1K). Q4 quantization fits 4x more agent contexts into fixed device memory than FP16. Perplexity measured with actual Q4 KV caches shows -0.7% for Gemma, +2.8% for Llama, and +3.0% for DeepSeek. Open-source at https://github.com/yshk-mxim/agent-memory

  • 1 authors
·
Feb 17

HALO: Hierarchical Autonomous Logic-Oriented Orchestration for Multi-Agent LLM Systems

Recent advancements in Multi-Agent Systems (MAS) powered by Large Language Models (LLMs) have demonstrated tremendous potential in diverse task scenarios. Nonetheless, existing agentic systems typically rely on predefined agent-role design spaces and static communication structures, limiting their adaptability as well as flexibility in complex interaction environments and leading to subpar performance on highly specialized and expert-level tasks. To address these issues, we introduce HALO, a multi-agent collaboration framework based on a hierarchical reasoning architecture. Specifically, we incorporate a high-level planning agent for task decomposition, mid-level role-design agents for subtask-specific agent instantiation, and low-level inference agents for subtask execution. Particularly, subtask execution is reformulated as a structured workflow search problem, where Monte Carlo Tree Search (MCTS) systematically explores the agentic action space to construct optimal reasoning trajectories. Additionally, as the majority of users lack expertise in prompt engineering, we leverage an Adaptive Prompt Refinement module to transform raw queries into task-specific prompts. Empirical evaluations on Code Generation (HumanEval), General Reasoning (MMLU), and Arithmetic Reasoning (MATH) benchmark datasets highlight the effectiveness of HALO, yielding a 14.4% average improvement over state-of-the-art baselines. Notably, HALO achieves up to 13.3% performance gain on the Moral Scenarios subject in the MMLU benchmark and up to 19.6% performance gain on the Algebra subarea in the MATH benchmark, indicating its advanced proficiency in tackling highly specialized and expert-level tasks. The code repository is available at https://github.com/23japhone/HALO.

  • 3 authors
·
May 17, 2025

ComfyGPT: A Self-Optimizing Multi-Agent System for Comprehensive ComfyUI Workflow Generation

ComfyUI provides a widely-adopted, workflow-based interface that enables users to customize various image generation tasks through an intuitive node-based architecture. However, the intricate connections between nodes and diverse modules often present a steep learning curve for users. In this paper, we introduce ComfyGPT, the first self-optimizing multi-agent system designed to generate ComfyUI workflows based on task descriptions automatically. ComfyGPT comprises four specialized agents: ReformatAgent, FlowAgent, RefineAgent, and ExecuteAgent. The core innovation of ComfyGPT lies in two key aspects. First, it focuses on generating individual node links rather than entire workflows, significantly improving generation precision. Second, we proposed FlowAgent, a LLM-based workflow generation agent that uses both supervised fine-tuning (SFT) and reinforcement learning (RL) to improve workflow generation accuracy. Moreover, we introduce FlowDataset, a large-scale dataset containing 13,571 workflow-description pairs, and FlowBench, a comprehensive benchmark for evaluating workflow generation systems. We also propose four novel evaluation metrics: Format Validation (FV), Pass Accuracy (PA), Pass Instruct Alignment (PIA), and Pass Node Diversity (PND). Experimental results demonstrate that ComfyGPT significantly outperforms existing LLM-based methods in workflow generation.

  • 9 authors
·
Mar 22, 2025

MemTool: Optimizing Short-Term Memory Management for Dynamic Tool Calling in LLM Agent Multi-Turn Conversations

Large Language Model (LLM) agents have shown significant autonomous capabilities in dynamically searching and incorporating relevant tools or Model Context Protocol (MCP) servers for individual queries. However, fixed context windows limit effectiveness in multi-turn interactions requiring repeated, independent tool usage. We introduce MemTool, a short-term memory framework enabling LLM agents to dynamically manage tools or MCP server contexts across multi-turn conversations. MemTool offers three agentic architectures: 1) Autonomous Agent Mode, granting full tool management autonomy, 2) Workflow Mode, providing deterministic control without autonomy, and 3) Hybrid Mode, combining autonomous and deterministic control. Evaluating each MemTool mode across 13+ LLMs on the ScaleMCP benchmark, we conducted experiments over 100 consecutive user interactions, measuring tool removal ratios (short-term memory efficiency) and task completion accuracy. In Autonomous Agent Mode, reasoning LLMs achieve high tool-removal efficiency (90-94% over a 3-window average), while medium-sized models exhibit significantly lower efficiency (0-60%). Workflow and Hybrid modes consistently manage tool removal effectively, whereas Autonomous and Hybrid modes excel at task completion. We present trade-offs and recommendations for each MemTool mode based on task accuracy, agency, and model capabilities.

  • 5 authors
·
Jul 28, 2025 1

Autonomous Multi-Modal LLM Agents for Treatment Planning in Focused Ultrasound Ablation Surgery

Focused Ultrasound Ablation Surgery (FUAS) has emerged as a promising non-invasive therapeutic modality, valued for its safety and precision. Nevertheless, its clinical implementation entails intricate tasks such as multimodal image interpretation, personalized dose planning, and real-time intraoperative decision-making processes that demand intelligent assistance to improve efficiency and reliability. We introduce FUAS-Agents, an autonomous agent system that leverages the multimodal understanding and tool-using capabilities of large language models (LLMs). By integrating patient profiles and MRI data, FUAS-Agents orchestrates a suite of specialized medical AI tools, including segmentation, treatment dose prediction, and clinical guideline retrieval, to generate personalized treatment plans comprising MRI image, dose parameters, and therapeutic strategies. We evaluate the system in a uterine fibroid treatment scenario. Human assessment by four senior FUAS experts indicates that 82.5%, 82.5%, 87.5%, and 97.5% of the generated plans were rated 4 or above (on a 5-point scale) in terms of completeness, accuracy, fluency, and clinical compliance, respectively. These results demonstrate the potential of LLM-driven agents in enhancing decision-making across complex clinical workflows, and exemplify a translational paradigm that combines general-purpose models with specialized expert systems to solve practical challenges in vertical healthcare domains.

  • 9 authors
·
May 27, 2025

CodeCoR: An LLM-Based Self-Reflective Multi-Agent Framework for Code Generation

Code generation aims to produce code that fulfills requirements written in natural languages automatically. Large language Models (LLMs) like ChatGPT have demonstrated promising effectiveness in this area. Nonetheless, these LLMs often fail to ensure the syntactic and semantic correctness of the generated code. Recently, researchers proposed multi-agent frameworks that guide LLMs with different prompts to analyze programming tasks, generate code, perform testing in a sequential workflow. However, the performance of the workflow is not robust as the code generation depends on the performance of each agent. To address this challenge, we propose CodeCoR, a self-reflective multi-agent framework that evaluates the effectiveness of each agent and their collaborations. Specifically, for a given task description, four agents in CodeCoR generate prompts, code, test cases, and repair advice, respectively. Each agent generates more than one output and prunes away the low-quality ones. The generated code is tested in the local environment: the code that fails to pass the generated test cases is sent to the repair agent and the coding agent re-generates the code based on repair advice. Finally, the code that passes the most number of generated test cases is returned to users. Our experiments on four widely used datasets, HumanEval, HumanEval-ET, MBPP, and MBPP-ET, demonstrate that CodeCoR significantly outperforms existing baselines (e.g., CodeCoT and MapCoder), achieving an average Pass@1 score of 77.8%.

  • 3 authors
·
Jan 13, 2025

Skill-SD: Skill-Conditioned Self-Distillation for Multi-turn LLM Agents

Reinforcement learning (RL) has been widely used to train LLM agents for multi-turn interactive tasks, but its sample efficiency is severely limited by sparse rewards and long horizons. On-policy self-distillation (OPSD) alleviates this by providing dense token-level supervision from a privileged teacher that has access to ground-truth answers. However, such fixed privileged information cannot capture the diverse valid strategies in agent tasks, and naively combining OPSD with RL often leads to training collapse. To address these limitations, we introduce Skill-SD, a framework that turns the agent's own trajectories into dynamic training-only supervision. Completed trajectories are summarized into compact natural language skills that describe successful behaviors, mistakes, and workflows. These skills serve as dynamic privileged information conditioning only the teacher, while the student always acts under the plain task prompt and learns to internalize the guidance through distillation. To stabilize the training, we derive an importance-weighted reverse-KL loss to provide gradient-correct token-level distillation, and dynamically synchronize the teacher with the improving student. Experimental results on agentic benchmarks demonstrate that Skill-SD substantially outperforms the standard RL baseline, improving both vanilla GRPO (+14.0%/+10.9% on AppWorld/Sokoban) and vanilla OPD (+42.1%/+40.6%). Project page: https://k1xe.github.io/skill-sd/

  • 11 authors
·
Apr 11

Beyond End-to-End Video Models: An LLM-Based Multi-Agent System for Educational Video Generation

Although recent end-to-end video generation models demonstrate impressive performance in visually oriented content creation, they remain limited in scenarios that require strict logical rigor and precise knowledge representation, such as instructional and educational media. To address this problem, we propose LAVES, a hierarchical LLM-based multi-agent system for generating high-quality instructional videos from educational problems. The LAVES formulates educational video generation as a multi-objective task that simultaneously demands correct step-by-step reasoning, pedagogically coherent narration, semantically faithful visual demonstrations, and precise audio--visual alignment. To address the limitations of prior approaches--including low procedural fidelity, high production cost, and limited controllability--LAVES decomposes the generation workflow into specialized agents coordinated by a central Orchestrating Agent with explicit quality gates and iterative critique mechanisms. Specifically, the Orchestrating Agent supervises a Solution Agent for rigorous problem solving, an Illustration Agent that produces executable visualization codes, and a Narration Agent for learner-oriented instructional scripts. In addition, all outputs from the working agents are subject to semantic critique, rule-based constraints, and tool-based compilation checks. Rather than directly synthesizing pixels, the system constructs a structured executable video script that is deterministically compiled into synchronized visuals and narration using template-driven assembly rules, enabling fully automated end-to-end production without manual editing. In large-scale deployments, LAVES achieves a throughput exceeding one million videos per day, delivering over a 95% reduction in cost compared to current industry-standard approaches while maintaining a high acceptance rate.

  • 6 authors
·
Feb 11

GraphPlanner: Graph Memory-Augmented Agentic Routing for Multi-Agent LLMs

LLM routing has achieved promising results in integrating the strengths of diverse models while balancing efficiency and performance. However, to support more realistic and challenging applications, routing must extend into agentic LLM settings, where task planning, multi-round cooperation among heterogeneous agents, and memory utilization are indispensable. To address this gap, we propose GraphPlanner, a heterogeneous graph memory-augmented agentic router for multi-agent LLMs that generates routing workflows for each query and supports both inductive and transductive inference. GraphPlanner formulates workflow generation as a Markov Decision Process (MDP), where at each step it selects both the LLM backbone and the agent role, including Planner, Executor, and Summarizer. By leveraging a heterogeneous graph, denoted as GARNet, to capture interaction memories among queries, agents, and responses, GraphPlanner integrates historical memory and workflow memory into richer state representations. The entire pipeline is optimized with reinforcement learning, jointly improving task-specific performance and computational efficiency. We evaluate GraphPlanner across 14 diverse LLM tasks and demonstrate that: (1) GraphPlanner outperforms strong single-round and multi-round routers, improving accuracy by up to 9.3% while reducing GPU cost from 186.26 GiB to 1.04 GiB; (2) GraphPlanner generalizes robustly to unseen tasks and LLMs, exhibiting strong zero-shot capabilities; and (3) GraphPlanner effectively leverages historical memories, supporting both inductive and transductive inference for more adaptive routing. Our code for GraphPlanner is released at https://github.com/ulab-uiuc/GraphPlanner.

  • 5 authors
·
Apr 25

Overcoming the Retrieval Barrier: Indirect Prompt Injection in the Wild for LLM Systems

Large language models (LLMs) increasingly rely on retrieving information from external corpora. This creates a new attack surface: indirect prompt injection (IPI), where hidden instructions are planted in the corpora and hijack model behavior once retrieved. Previous studies have highlighted this risk but often avoid the hardest step: ensuring that malicious content is actually retrieved. In practice, unoptimized IPI is rarely retrieved under natural queries, which leaves its real-world impact unclear. We address this challenge by decomposing the malicious content into a trigger fragment that guarantees retrieval and an attack fragment that encodes arbitrary attack objectives. Based on this idea, we design an efficient and effective black-box attack algorithm that constructs a compact trigger fragment to guarantee retrieval for any attack fragment. Our attack requires only API access to embedding models, is cost-efficient (as little as $0.21 per target user query on OpenAI's embedding models), and achieves near-100% retrieval across 11 benchmarks and 8 embedding models (including both open-source models and proprietary services). Based on this attack, we present the first end-to-end IPI exploits under natural queries and realistic external corpora, spanning both RAG and agentic systems with diverse attack objectives. These results establish IPI as a practical and severe threat: when a user issued a natural query to summarize emails on frequently asked topics, a single poisoned email was sufficient to coerce GPT-4o into exfiltrating SSH keys with over 80% success in a multi-agent workflow. We further evaluate several defenses and find that they are insufficient to prevent the retrieval of malicious text, highlighting retrieval as a critical open vulnerability.

  • 4 authors
·
Jan 10

ChainFuzzer: Greybox Fuzzing for Workflow-Level Multi-Tool Vulnerabilities in LLM Agents

Tool-augmented LLM agents increasingly rely on multi-step, multi-tool workflows to complete real tasks. This design expands the attack surface, because data produced by one tool can be persisted and later reused as input to another tool, enabling exploitable source-to-sink dataflows that only emerge through tool composition. We study this risk as multi-tool vulnerabilities in LLM agents, and show that existing discovery efforts focused on single-tool or single-hop testing miss these long-horizon behaviors and provide limited debugging value. We present ChainFuzzer, a greybox framework for discovering and reproducing multi-tool vulnerabilities with auditable evidence. ChainFuzzer (i) identifies high-impact operations with strict source-to-sink dataflow evidence and extracts plausible upstream candidate tool chains based on cross-tool dependencies, (ii) uses Trace-guided Prompt Solving (TPS) to synthesize stable prompts that reliably drive the agent to execute target chains, and (iii) performs guardrail-aware fuzzing to reproduce vulnerabilities under LLM guardrails via payload mutation and sink-specific oracles. We evaluate ChainFuzzer on 20 popular open-source LLM agent apps (998 tools). ChainFuzzer extracts 2,388 candidate tool chains and synthesizes 2,213 stable prompts, confirming 365 unique, reproducible vulnerabilities across 19/20 apps (302 require multi-tool execution). Component evaluation shows tool-chain extraction achieves 96.49% edge precision and 91.50% strict chain precision; TPS increases chain reachability from 27.05% to 95.45%; guardrail-aware fuzzing boosts payload-level trigger rate from 18.20% to 88.60%. Overall, ChainFuzzer achieves 3.02 vulnerabilities per 1M tokens, providing a practical foundation for testing and hardening real-world multi-tool agent systems.

  • 4 authors
·
Mar 12

BackdoorAgent: A Unified Framework for Backdoor Attacks on LLM-based Agents

Large language model (LLM) agents execute tasks through multi-step workflows that combine planning, memory, and tool use. While this design enables autonomy, it also expands the attack surface for backdoor threats. Backdoor triggers injected into specific stages of an agent workflow can persist through multiple intermediate states and adversely influence downstream outputs. However, existing studies remain fragmented and typically analyze individual attack vectors in isolation, leaving the cross-stage interaction and propagation of backdoor triggers poorly understood from an agent-centric perspective. To fill this gap, we propose BackdoorAgent, a modular and stage-aware framework that provides a unified, agent-centric view of backdoor threats in LLM agents. BackdoorAgent structures the attack surface into three functional stages of agentic workflows, including planning attacks, memory attacks, and tool-use attacks, and instruments agent execution to enable systematic analysis of trigger activation and propagation across different stages. Building on this framework, we construct a standardized benchmark spanning four representative agent applications: Agent QA, Agent Code, Agent Web, and Agent Drive, covering both language-only and multimodal settings. Our empirical analysis shows that triggers implanted at a single stage can persist across multiple steps and propagate through intermediate states. For instance, when using a GPT-based backbone, we observe trigger persistence in 43.58\% of planning attacks, 77.97\% of memory attacks, and 60.28\% of tool-stage attacks, highlighting the vulnerabilities of the agentic workflow itself to backdoor threats. To facilitate reproducibility and future research, our code and benchmark are publicly available at GitHub.

  • 9 authors
·
Jan 10

SOP-Bench: Complex Industrial SOPs for Evaluating LLM Agents

LLM-based agents struggle to execute complex, multi-step Standard Operating Procedures (SOPs) that are fundamental to industrial automation. Existing benchmarks fail to capture the procedural complexity and tool orchestration demands of real-world workflows. We introduce SOP-Bench, a benchmark of 2,000+ tasks from human expert-authored SOPs across 12 business domains (healthcare, logistics, finance, content moderation, etc.). Using a human-AI collaborative framework, experts crafted authentic SOPs while AI generated artifacts (tools, APIs, datasets), all human-validated, yielding realistic tasks with executable interfaces and ground-truth outputs. SOP-Bench serves as a research enabler for systematically investigating agent architectures, model capabilities, and deployment considerations across diverse procedural tasks. We demonstrate its utility through illustrative experiments with a subset of frontier models across Function-Calling (FC) and ReAct agents, revealing critical insights. For example, (1) newer models do not guarantee better performance - Claude 4 family outperforms Claude 4.5 family on ReAct tasks (Claude 4 Opus: 72.4% vs. Claude 4.5 Sonnet: 63.3% task success rate), demonstrating that production upgrades require validation; (2) no single model-agent combination dominates: best performances range from 57% to 100% depending on domain. These examples illustrate how SOP-Bench enables isolating and studying specific dimensions of agent performance without costly production experiments. Our goal is not to rank model capabilities or build optimal agents, but to provide a rigorous evaluation framework that enables the researchers and practitioners to systematically investigate agent design choices, model selection, and deployment strategies. We release the benchmark at https://github.com/amazon-science/sop-bench.

  • 24 authors
·
Feb 22

Tool Attention Is All You Need: Dynamic Tool Gating and Lazy Schema Loading for Eliminating the MCP/Tools Tax in Scalable Agentic Workflows

The Model Context Protocol (MCP) has become a common interface for connecting large language model (LLM) agents to external tools, but its reliance on stateless, eager schema injection imposes a hidden per-turn overhead the MCP Tax or Tools Tax that practitioner reports place between roughly 10k and 60k tokens in typical multi-server deployments. This payload inflates the key-value cache, is associated with reasoning degradation as context utilization approaches published fracture points around 70%, and turns token budgets into a recurring operational cost. We introduce Tool Attention, a middleware-layer mechanism that generalizes the "Attention Is All You Need" paradigm from self-attention over tokens to gated attention over tools. Tool Attention combines (i) an Intent Schema Overlap (ISO) score from sentence embeddings, (ii) a state-aware gating function enforcing preconditions and access scopes, and (iii) a two-phase lazy schema loader that keeps a compact summary pool in context and promotes full JSON schemas only for top-k gated tools. We evaluate on a simulated 120-tool, six-server benchmark whose per-server token counts are calibrated to public audits of real MCP deployments. In this simulation, Tool Attention directly reduces measured per-turn tool tokens by 95.0% (47.3k -> 2.4k) and raises effective context utilization (a token-ratio quantity) from 24% to 91%. End-to-end figures for task success, latency, cost, and reasoning quality are reported as projections derived from the measured token counts combined with published deployment telemetry; they are not measured on live LLM agents, and we mark projected values explicitly throughout. Taken together, the results support a simple thesis: protocol-level efficiency, not raw context length, is a binding constraint on scalable gentic systems. The code for this work is accessible at https://github.com/asadani/tool-attention

  • 2 authors
·
Apr 22

ClawsBench: Evaluating Capability and Safety of LLM Productivity Agents in Simulated Workspaces

Large language model (LLM) agents are increasingly deployed to automate productivity tasks (e.g., email, scheduling, document management), but evaluating them on live services is risky due to potentially irreversible changes. Existing benchmarks rely on simplified environments and fail to capture realistic, stateful, multi-service workflows. We introduce ClawsBench, a benchmark for evaluating and improving LLM agents in realistic productivity settings. It includes five high-fidelity mock services (Gmail, Slack, Google Calendar, Google Docs, Google Drive) with full state management and deterministic snapshot/restore, along with 44 structured tasks covering single-service, cross-service, and safety-critical scenarios. We decompose agent scaffolding into two independent levers (domain skills that inject API knowledge via progressive disclosure, and a meta prompt that coordinates behavior across services) and vary both to measure their separate and combined effects. Experiments across 6 models, 4 agent harnesses, and 33 conditions show that with full scaffolding, agents achieve task success rates of 39-64% but exhibit unsafe action rates of 7-33%. On OpenClaw, the top five models fall within a 10 percentage-point band on task success (53-63%), with unsafe action rates from 7% to 23% and no consistent ordering between the two metrics. We identify eight recurring patterns of unsafe behavior, including multi-step sandbox escalation and silent contract modification.

benchflow BenchFlow
·
Apr 5 2

AutoFlow: Automated Workflow Generation for Large Language Model Agents

Recent advancements in Large Language Models (LLMs) have shown significant progress in understanding complex natural language. One important application of LLM is LLM-based AI Agent, which leverages the ability of LLM as well as external tools for complex-task solving. To make sure LLM Agents follow an effective and reliable procedure to solve the given task, manually designed workflows are usually used to guide the working mechanism of agents. However, manually designing the workflows requires considerable efforts and domain knowledge, making it difficult to develop and deploy agents on massive scales. To address these issues, we propose AutoFlow, a framework designed to automatically generate workflows for agents to solve complex tasks. AutoFlow takes natural language program as the format of agent workflow and employs a workflow optimization procedure to iteratively optimize the workflow quality. Besides, this work offers two workflow generation methods: fine-tuning-based and in-context-based methods, making the AutoFlow framework applicable to both open-source and closed-source LLMs. Experimental results show that our framework can produce robust and reliable agent workflows. We believe that the automatic generation and interpretation of workflows in natural language represent a promising paradigm for solving complex tasks, particularly with the rapid development of LLMs. The source code of this work is available at https://github.com/agiresearch/AutoFlow.

  • 9 authors
·
Jul 1, 2024

MALT: Improving Reasoning with Multi-Agent LLM Training

Enabling effective collaboration among LLMs is a crucial step toward developing autonomous systems capable of solving complex problems. While LLMs are typically used as single-model generators, where humans critique and refine their outputs, the potential for jointly-trained collaborative models remains largely unexplored. Despite promising results in multi-agent communication and debate settings, little progress has been made in training models to work together on tasks. In this paper, we present a first step toward "Multi-agent LLM training" (MALT) on reasoning problems. Our approach employs a sequential multi-agent setup with heterogeneous LLMs assigned specialized roles: a generator, verifier, and refinement model iteratively solving problems. We propose a trajectory-expansion-based synthetic data generation process and a credit assignment strategy driven by joint outcome based rewards. This enables our post-training setup to utilize both positive and negative trajectories to autonomously improve each model's specialized capabilities as part of a joint sequential system. We evaluate our approach across MATH, GSM8k, and CQA, where MALT on Llama 3.1 8B models achieves relative improvements of 14.14%, 7.12%, and 9.40% respectively over the same baseline model. This demonstrates an early advance in multi-agent cooperative capabilities for performance on mathematical and common sense reasoning questions. More generally, our work provides a concrete direction for research around multi-agent LLM training approaches.

  • 9 authors
·
Dec 2, 2024 4

Multi-Agent Collaboration Mechanisms: A Survey of LLMs

With recent advances in Large Language Models (LLMs), Agentic AI has become phenomenal in real-world applications, moving toward multiple LLM-based agents to perceive, learn, reason, and act collaboratively. These LLM-based Multi-Agent Systems (MASs) enable groups of intelligent agents to coordinate and solve complex tasks collectively at scale, transitioning from isolated models to collaboration-centric approaches. This work provides an extensive survey of the collaborative aspect of MASs and introduces an extensible framework to guide future research. Our framework characterizes collaboration mechanisms based on key dimensions: actors (agents involved), types (e.g., cooperation, competition, or coopetition), structures (e.g., peer-to-peer, centralized, or distributed), strategies (e.g., role-based or model-based), and coordination protocols. Through a review of existing methodologies, our findings serve as a foundation for demystifying and advancing LLM-based MASs toward more intelligent and collaborative solutions for complex, real-world use cases. In addition, various applications of MASs across diverse domains, including 5G/6G networks, Industry 5.0, question answering, and social and cultural settings, are also investigated, demonstrating their wider adoption and broader impacts. Finally, we identify key lessons learned, open challenges, and potential research directions of MASs towards artificial collective intelligence.

  • 6 authors
·
Jan 10, 2025

MARFT: Multi-Agent Reinforcement Fine-Tuning

LLM-based Multi-Agent Systems have demonstrated remarkable capabilities in addressing complex, agentic tasks, from generating high-quality presentation slides to even conducting sophisticated scientific research. Meanwhile, RL has been widely recognized for its effectiveness in enhancing agent intelligence, but limited research has investigated the fine-tuning of LaMAS using foundational RL techniques. Moreover, the direct application of MARL methods to LaMAS introduces significant challenges, stemming from the unique characteristics and mechanisms inherent to LaMAS. To address these challenges, this article presents a comprehensive study of LLM-based MARL and proposes a novel paradigm termed Multi-Agent Reinforcement Fine-Tuning (MARFT). We introduce a brand-new POMDP called Flex-POMDP, which aligns with the LaMAS optimization in real-world applications and a universal algorithmic framework tailored specifically for LaMAS, outlining the conceptual foundations, key distinctions, and practical implementation strategies. We review the evolution from RL to RFT, setting the stage for a parallel analysis in the multi-agent domain. In the context of LaMAS, we elucidate critical differences between MARL and MARFT. These differences motivate a transition toward a LaMAS-oriented formulation of RFT. Central to this work is a robust and scalable MARFT framework. We detail the core algorithm and provide a complete, open-source implementation to facilitate adoption and further research. The latter sections of the paper explore real-world application perspectives and opening challenges in MARFT. By bridging theoretical underpinnings with practical methodologies, this work serves as a roadmap for researchers seeking to advance MARFT toward resilient and adaptive solutions in agentic systems. Our implementation of the proposed framework is publicly available at: https://github.com/jwliao-ai/MARFT.

  • 4 authors
·
Apr 21, 2025

A Comprehensive Survey on Agent Skills: Taxonomy, Techniques, and Applications

Large language model (LLM)-based agents that reason, plan, and act through tools, memory, and structured interaction are emerging as a promising paradigm for automating complex workflows. Recent systems such as OpenClaw and Claude Code exemplify a broader shift from passive response generation to action-oriented task execution. Yet as agents move toward open-ended, real-world deployment, relying on from-scratch reasoning and low-level tool calls for every task become increasingly inefficient, error-prone, and hard to maintain. This survey examines this challenge through the lens of agent skills, which we define as reusable procedural artifacts that coordinate tools, memory, and runtime context under task-specific constraints. Under this view, agents and skills play complementary roles: agents handle high-level reasoning and planning, while skills form the operational layer that enables reliable, reusable, and composable execution. Skills are therefore central to the scalability, robustness, and maintainability of modern agent systems. We organize the literature around four stages of the agent skill lifecycle -- representation, acquisition, retrieval, and evolution -- and review representative methods, ecosystem resources, and application settings across each stage. We conclude by discussing open challenges in quality control, interoperability, safe updating, and long-term capability management. All related resources, including research papers, open-source data, and projects, are collected for the community in blue{https://github.com/JayLZhou/Awesome-Agent-Skills}.

  • 6 authors
·
May 25

Multi-Agent Software Development through Cross-Team Collaboration

The latest breakthroughs in Large Language Models (LLMs), eg., ChatDev, have catalyzed profound transformations, particularly through multi-agent collaboration for software development. LLM agents can collaborate in teams like humans, and follow the waterfall model to sequentially work on requirements analysis, development, review, testing, and other phases to perform autonomous software generation. However, for an agent team, each phase in a single development process yields only one possible outcome. This results in the completion of only one development chain, thereby losing the opportunity to explore multiple potential decision paths within the solution space. Consequently, this may lead to obtaining suboptimal results. To address this challenge, we introduce Cross-Team Collaboration (CTC), a scalable multi-team framework that enables orchestrated teams to jointly propose various decisions and communicate with their insights in a cross-team collaboration environment for superior content generation. Experimental results in software development reveal a notable increase in quality compared to state-of-the-art baselines, underscoring the efficacy of our framework. The significant improvements in story generation demonstrate the promising generalization ability of our framework across various domains. We anticipate that our work will guide LLM agents towards a cross-team paradigm and contribute to their significant growth in but not limited to software development. The code and data will be available at https://github.com/OpenBMB/ChatDev.

  • 8 authors
·
Jun 13, 2024

Chain-of-Agents: End-to-End Agent Foundation Models via Multi-Agent Distillation and Agentic RL

Recent advances in large language models (LLMs) and multi-agent systems have demonstrated remarkable capabilities in complex problem-solving tasks such as deep research, vibe coding, and mathematical reasoning. However, most existing multi-agent systems are built upon manual prompt/workflow engineering with sophisticated agent frameworks, making them computationally inefficient, less capable, and can not benefit from data-centric learning. In this work, we introduce Chain-of-Agents (CoA), a novel paradigm of LLM reasoning that enables native end-to-end complex problem-solving in the same way as a multi-agent system (i.e., multi-turn problem solving with multiple tools and multiple agents) within one model. In chain-of-agents problem-solving, the model dynamically activates different tool agents and role-playing agents to simulate multi-agent collaboration in an end-to-end fashion. To elicit end-to-end chain-of-agents problem-solving abilities in LLMs, we introduce a multi-agent distillation framework to distill state-of-the-art multi-agent systems into chain-of-agents trajectories for agentic supervised fine-tuning. We then use agentic reinforcement learning on verifiable agentic tasks to further improve the models' capabilities on chain-of-agents problem solving. We call the resulting models Agent Foundation Models (AFMs). Our empirical studies demonstrate that AFM establishes new state-of-the-art performance across diverse benchmarks in both web agent and code agent settings. We make the entire research, including the model weights, code for training and evaluation, and the training data, fully open-sourced, which offers a solid starting point for future research on agent models and agentic RL.

  • 30 authors
·
Aug 6, 2025 9

Multi-User Large Language Model Agents

Large language models (LLMs) and LLM-based agents are increasingly deployed as assistants in planning and decision making, yet most existing systems are implicitly optimized for a single-principal interaction paradigm, in which the model is designed to satisfy the objectives of one dominant user whose instructions are treated as the sole source of authority and utility. However, as they are integrated into team workflows and organizational tools, they are increasingly required to serve multiple users simultaneously, each with distinct roles, preferences, and authority levels, leading to multi-user, multi-principal settings with unavoidable conflicts, information asymmetry, and privacy constraints. In this work, we present the first systematic study of multi-user LLM agents. We begin by formalizing multi-user interaction with LLM agents as a multi-principal decision problem, where a single agent must account for multiple users with potentially conflicting interests and associated challenges. We then introduce a unified multi-user interaction protocol and design three targeted stress-testing scenarios to evaluate current LLMs' capabilities in instruction following, privacy preservation, and coordination. Our results reveal systematic gaps: frontier LLMs frequently fail to maintain stable prioritization under conflicting user objectives, exhibit increasing privacy violations over multi-turn interactions, and suffer from efficiency bottlenecks when coordination requires iterative information gathering.

Claw-Eval-Live: A Live Agent Benchmark for Evolving Real-World Workflows

LLM agents are expected to complete end-to-end units of work across software tools, business services, and local workspaces. Yet many agent benchmarks freeze a curated task set at release time and grade mainly the final response, making it difficult to evaluate agents against evolving workflow demand or verify whether a task was executed. We introduce Claw-Eval-Live, a live benchmark for workflow agents that separates a refreshable signal layer, updated across releases from public workflow-demand signals, from a reproducible, time-stamped release snapshot. Each release is constructed from public workflow-demand signals, with ClawHub Top-500 skills used in the current release, and materialized as controlled tasks with fixed fixtures, services, workspaces, and graders. For grading, Claw-Eval-Live records execution traces, audit logs, service state, and post-run workspace artifacts, using deterministic checks when evidence is sufficient and structured LLM judging only for semantic dimensions. The release contains 105 tasks spanning controlled business services and local workspace repair, and evaluates 13 frontier models under a shared public pass rule. Experiments reveal that reliable workflow automation remains far from solved: the leading model passes only 66.7% of tasks and no model reaches 70%. Failures are structured by task family and execution surface, with HR, management, and multi-system business workflows as persistent bottlenecks and local workspace repair comparatively easier but unsaturated. Leaderboard rank alone is insufficient because models with similar pass rates can diverge in overall completion, and task-level discrimination concentrates in a middle band of tasks. Claw-Eval-Live suggests that workflow-agent evaluation should be grounded twice, in fresh external demand and in verifiable agent action.

  • 11 authors
·
Apr 29 2

A Practical Guide for Designing, Developing, and Deploying Production-Grade Agentic AI Workflows

Agentic AI marks a major shift in how autonomous systems reason, plan, and execute multi-step tasks. Unlike traditional single model prompting, agentic workflows integrate multiple specialized agents with different Large Language Models(LLMs), tool-augmented capabilities, orchestration logic, and external system interactions to form dynamic pipelines capable of autonomous decision-making and action. As adoption accelerates across industry and research, organizations face a central challenge: how to design, engineer, and operate production-grade agentic AI workflows that are reliable, observable, maintainable, and aligned with safety and governance requirements. This paper provides a practical, end-to-end guide for designing, developing, and deploying production-quality agentic AI systems. We introduce a structured engineering lifecycle encompassing workflow decomposition, multi-agent design patterns, Model Context Protocol(MCP), and tool integration, deterministic orchestration, Responsible-AI considerations, and environment-aware deployment strategies. We then present nine core best practices for engineering production-grade agentic AI workflows, including tool-first design over MCP, pure-function invocation, single-tool and single-responsibility agents, externalized prompt management, Responsible-AI-aligned model-consortium design, clean separation between workflow logic and MCP servers, containerized deployment for scalable operations, and adherence to the Keep it Simple, Stupid (KISS) principle to maintain simplicity and robustness. To demonstrate these principles in practice, we present a comprehensive case study: a multimodal news-analysis and media-generation workflow. By combining architectural guidance, operational patterns, and practical implementation insights, this paper offers a foundational reference to build robust, extensible, and production-ready agentic AI workflows.

  • 14 authors
·
Dec 9, 2025

A Lightweight Modular Framework for Constructing Autonomous Agents Driven by Large Language Models: Design, Implementation, and Applications in AgentForge

The emergence of LLMs has catalyzed a paradigm shift in autonomous agent development, enabling systems capable of reasoning, planning, and executing complex multi-step tasks. However, existing agent frameworks often suffer from architectural rigidity, vendor lock-in, and prohibitive complexity that impedes rapid prototyping and deployment. This paper presents AgentForge, a lightweight, open-source Python framework designed to democratize the construction of LLM-driven autonomous agents through a principled modular architecture. AgentForge introduces three key innovations: (1) a composable skill abstraction that enables fine-grained task decomposition with formally defined input-output contracts, (2) a unified LLM backend interface supporting seamless switching between cloud-based APIs and local inference engines, and (3) a declarative YAML-based configuration system that separates agent logic from implementation details. We formalize the skill composition mechanism as a directed acyclic graph (DAG) and prove its expressiveness for representing arbitrary sequential and parallel task workflows. Comprehensive experimental evaluation across four benchmark scenarios demonstrates that AgentForge achieves competitive task completion rates while reducing development time by 62% compared to LangChain and 78% compared to direct API integration. Latency measurements confirm sub-100ms orchestration overhead, rendering the framework suitable for real-time applications. The modular design facilitates extension: we demonstrate the integration of six built-in skills and provide comprehensive documentation for custom skill development. AgentForge addresses a critical gap in the LLM agent ecosystem by providing researchers and practitioners with a production-ready foundation for constructing, evaluating, and deploying autonomous agents without sacrificing flexibility or performance.

  • 3 authors
·
Jan 19

From Static Templates to Dynamic Runtime Graphs: A Survey of Workflow Optimization for LLM Agents

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

ibm IBM
·
Mar 23 2

ThunderAgent: A Simple, Fast and Program-Aware Agentic Inference System

Large language models(LLMs) are now used to power complex multi-turn agentic workflows. Existing systems run agentic inference by loosely assembling isolated components: an LLM inference engine (e.g., vLLM) and a tool orchestrator (e.g., Kubernetes). Although agentic workflows involve multiple LLM and tool requests, these systems schedule and allocate resources separately on a per-request basis, without end-to-end knowledge of the workflow. This leads to sub-optimal management of KV cache and tool execution environments. To address the challenges, we propose ThunderAgent, a fast, simple, and program-aware agentic inference system. We first abstract agentic workflows as LLM Programs, enabling a unified view of heterogeneous resources, including KV caches, system states, and external tool assets such as disk memory and network ports. Built upon this abstraction, ThunderAgent introduces a program-aware scheduler and a tool resource manager designed to maximize KV cache hit rates, mitigate memory imbalances, and enable asynchronous environment preparation. Evaluations across coding, routing, and scientific discovery agents demonstrate that ThunderAgent achieves 1.5-3.6x throughput improvements in serving, 1.8-3.9x in RL rollout, and up to 4.2x disk memory savings compared to state-of-the-art inference systems. To facilitate reproducibility and support future development, we open-source the system implementations of the whole ThunderAgent at: https://github.com/Agentic-Kinetics/ThunderAgent.

  • 10 authors
·
Feb 14

WorkflowLLM: Enhancing Workflow Orchestration Capability of Large Language Models

Recent advancements in large language models (LLMs) have driven a revolutionary paradigm shift in process automation from Robotic Process Automation to Agentic Process Automation by automating the workflow orchestration procedure based on LLMs. However, existing LLMs (even the advanced OpenAI GPT-4o) are confined to achieving satisfactory capability in workflow orchestration. To address this limitation, we present WorkflowLLM, a data-centric framework elaborately designed to enhance the capability of LLMs in workflow orchestration. It first constructs a large-scale fine-tuning dataset WorkflowBench with 106,763 samples, covering 1,503 APIs from 83 applications across 28 categories. Specifically, the construction process can be divided into three phases: (1) Data Collection: we collect real-world workflow data from Apple Shortcuts and RoutineHub, transcribing them into Python-style code. We further equip them with generated hierarchical thought via ChatGPT. (2) Query Expansion: we prompt ChatGPT to generate more task queries to enrich the diversity and complexity of workflows. (3) Workflow Generation: we leverage an annotator model trained on collected data to generate workflows for synthesized queries. Finally, we merge the synthetic samples that pass quality confirmation with the collected samples to obtain the WorkflowBench. Based on WorkflowBench, we fine-tune Llama-3.1-8B to obtain WorkflowLlama. Our experiments show that WorkflowLlama demonstrates a strong capacity to orchestrate complex workflows, while also achieving notable generalization performance on previously unseen APIs. Additionally, WorkflowBench exhibits robust zero-shot generalization capabilities on an out-of-distribution task planning dataset, T-Eval. Our data and code are available at https://github.com/OpenBMB/WorkflowLLM.

  • 10 authors
·
Nov 8, 2024

Spider2-V: How Far Are Multimodal Agents From Automating Data Science and Engineering Workflows?

Data science and engineering workflows often span multiple stages, from warehousing to orchestration, using tools like BigQuery, dbt, and Airbyte. As vision language models (VLMs) advance in multimodal understanding and code generation, VLM-based agents could potentially automate these workflows by generating SQL queries, Python code, and GUI operations. This automation can improve the productivity of experts while democratizing access to large-scale data analysis. In this paper, we introduce Spider2-V, the first multimodal agent benchmark focusing on professional data science and engineering workflows, featuring 494 real-world tasks in authentic computer environments and incorporating 20 enterprise-level professional applications. These tasks, derived from real-world use cases, evaluate the ability of a multimodal agent to perform data-related tasks by writing code and managing the GUI in enterprise data software systems. To balance realistic simulation with evaluation simplicity, we devote significant effort to developing automatic configurations for task setup and carefully crafting evaluation metrics for each task. Furthermore, we supplement multimodal agents with comprehensive documents of these enterprise data software systems. Our empirical evaluation reveals that existing state-of-the-art LLM/VLM-based agents do not reliably automate full data workflows (14.0% success). Even with step-by-step guidance, these agents still underperform in tasks that require fine-grained, knowledge-intensive GUI actions (16.2%) and involve remote cloud-hosted workspaces (10.6%). We hope that Spider2-V paves the way for autonomous multimodal agents to transform the automation of data science and engineering workflow. Our code and data are available at https://spider2-v.github.io.

  • 23 authors
·
Jul 15, 2024 2

Aime: Towards Fully-Autonomous Multi-Agent Framework

Multi-Agent Systems (MAS) powered by Large Language Models (LLMs) are emerging as a powerful paradigm for solving complex, multifaceted problems. However, the potential of these systems is often constrained by the prevalent plan-and-execute framework, which suffers from critical limitations: rigid plan execution, static agent capabilities, and inefficient communication. These weaknesses hinder their adaptability and robustness in dynamic environments. This paper introduces Aime, a novel multi-agent framework designed to overcome these challenges through dynamic, reactive planning and execution. Aime replaces the conventional static workflow with a fluid and adaptive architecture. Its core innovations include: (1) a Dynamic Planner that continuously refines the overall strategy based on real-time execution feedback; (2) an Actor Factory that implements Dynamic Actor instantiation, assembling specialized agents on-demand with tailored tools and knowledge; and (3) a centralized Progress Management Module that serves as a single source of truth for coherent, system-wide state awareness. We empirically evaluated Aime on a diverse suite of benchmarks spanning general reasoning (GAIA), software engineering (SWE-bench Verified), and live web navigation (WebVoyager). The results demonstrate that Aime consistently outperforms even highly specialized state-of-the-art agents in their respective domains. Its superior adaptability and task success rate establish Aime as a more resilient and effective foundation for multi-agent collaboration.

  • 15 authors
·
Jul 16, 2025