diff --git "a/Current/logs/default40.log" "b/Current/logs/default40.log" --- "a/Current/logs/default40.log" +++ "b/Current/logs/default40.log" @@ -1,2788 +1,1113 @@ -06/14/2026 18:08:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9902824. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4015052. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:08:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:08:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:08:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=99.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:08:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.06739298502603. Used = 99.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:08:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 412.6915038, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 1.8608191279111688, Elapsed = 00:06:52.7115444, TimeTotal = 06:09:39.0252588, Remaining = 06:02:46.3137144, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.9649700, WeightTotalEstimate = 01:03:09.9649700, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.5052182, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:52.7115444, HeatingEstimate = 01:03:07.3084962, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.0666612, WeightEstimate = 01:03:09.9649700 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:10:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:08:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8608191279111688;StartedAtUtc;00:06:52.7115444;06:09:39.0252588;06:02:46.3137144;False;232;0;0;00:00:00;01:03:09.9649700;01:03:09.9649700;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.5052182;00:00:00;02:00:00;00:06:52.7115444;01:03:07.3084962;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.0666612 [PrintingService.cs@1918] -06/14/2026 18:08:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=87.75,printChamber1=87.75,printChamber2=87.75,printChamber3=87.75,printChamber4=87.75 [ControlledHeating.cs@169] -06/14/2026 18:08:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1546622 ~ 6 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:08:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=52.75,powderChamber1=52.75,powderChamber2=52.75,powderChamber3=52.75,powderChamber4=52.75 [ControlledHeating.cs@169] -06/14/2026 18:08:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351462, estimate=49.19230097737452 for layer 9, Z=0.901 [PrintingService.cs@1524] -06/14/2026 18:08:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 9, island count 7 [PrintingService.cs@1569] -06/14/2026 18:08:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 10, start=0, count=232, Z=1.001 [PrintingService.cs@1518] -06/14/2026 18:08:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:08:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=100.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:08:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.06739298502603. Used = 100.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:08:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 420.1928072, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 1.8945224543692252, Elapsed = 00:07:00.2128321, TimeTotal = 06:09:40.4091649, Remaining = 06:02:40.1963328, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3488918, WeightTotalEstimate = 01:03:11.3488918, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8891400, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:00.2128321, HeatingEstimate = 01:02:59.8071928, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4505830, WeightEstimate = 01:03:11.3488918 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:08:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8945224543692252;StartedAtUtc;00:07:00.2128321;06:09:40.4091649;06:02:40.1963328;False;232;0;0;00:00:00;01:03:11.3488918;01:03:11.3488918;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8891400;00:00:00;02:00:00;00:07:00.2128321;01:02:59.8071928;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4505830 [PrintingService.cs@1918] -06/14/2026 18:08:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=88.75,printChamber1=88.75,printChamber2=88.75,printChamber3=88.75,printChamber4=88.75 [ControlledHeating.cs@169] -06/14/2026 18:08:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=100.50016021728516, Elapsed=00:00:30.2083098 [ControlledHeating.cs@486] -06/14/2026 18:08:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 100.50016021728516 after 00:00:30.2083705 [ControlledHeating.cs@493] -06/14/2026 18:08:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=53.75,powderChamber1=53.75,powderChamber2=53.75,powderChamber3=53.75,powderChamber4=53.75 [ControlledHeating.cs@169] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2954703. SinceCollect=00:01:00.7131113. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1958, gen1=256, gen2=36, LatencyMode=Interactive, FreeMemory=5928763392, Live=442969056, HeapSizeBytes=452746160, FragmentedBytes=10177032, TotalCommittedBytes=460537856, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631691. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0646752. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0801620. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:08:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 119346738333 (119346738333 @ 0) for mcu = 979.988168 [14/06/2026 15:11:12] (994.556152775 sec) to 121795193166 (from now=121675193166, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 119346738333 (119346738333 @ 0) for mcu = 979.988168 [14/06/2026 15:11:12] (994.556152775 sec) to 121795193166 (from external timestamp, flags=None, requested=121795193166 (121795193166 @ 0) for mcu = 1000.392521 [14/06/2026 15:11:33] (1014.95994305 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 119346738333 (119346738333 @ 0) for mcu = 979.988168 [14/06/2026 15:11:12] (994.556152775 sec) to 121795193166 (from external timestamp, flags=None, requested=121795193166 (121795193166 @ 0) for mcu = 1000.392521 [14/06/2026 15:11:33] (1014.95994305 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:08:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 50.25 [HeaterCheck.cs@67] -06/14/2026 18:08:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=101.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:08:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.06739298502603. Used = 101.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:08:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 427.6943173, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 1.9283429571100301, Elapsed = 00:07:07.7143583, TimeTotal = 06:09:40.4091810, Remaining = 06:02:32.6948227, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3488918, WeightTotalEstimate = 01:03:11.3488918, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8891400, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:07.7143583, HeatingEstimate = 01:02:52.3056827, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4505830, WeightEstimate = 01:03:11.3488918 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:08:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9283429571100301;StartedAtUtc;00:07:07.7143583;06:09:40.4091810;06:02:32.6948227;False;232;0;0;00:00:00;01:03:11.3488918;01:03:11.3488918;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8891400;00:00:00;02:00:00;00:07:07.7143583;01:02:52.3056827;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4505830 [PrintingService.cs@1918] -06/14/2026 18:08:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=89.75,printChamber1=89.75,printChamber2=89.75,printChamber3=89.75,printChamber4=89.75 [ControlledHeating.cs@169] -06/14/2026 18:08:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.25 [HeaterCheck.cs@67] -06/14/2026 18:08:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:08:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=40.25 that are outside of set tolerance 10 for current step target 53.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:08:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.5 [HeaterCheck.cs@67] -06/14/2026 18:08:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=102.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:08:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.06739298502603. Used = 102.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:08:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 435.201088, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 1.9621870034212125, Elapsed = 00:07:15.2211058, TimeTotal = 06:09:40.4091578, Remaining = 06:02:25.1880520, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3488918, WeightTotalEstimate = 01:03:11.3488918, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8891400, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:15.2211058, HeatingEstimate = 01:02:44.7989120, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4505830, WeightEstimate = 01:03:11.3488918 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:08:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9621870034212125;StartedAtUtc;00:07:15.2211058;06:09:40.4091578;06:02:25.1880520;False;232;0;0;00:00:00;01:03:11.3488918;01:03:11.3488918;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8891400;00:00:00;02:00:00;00:07:15.2211058;01:02:44.7989120;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4505830 [PrintingService.cs@1918] -06/14/2026 18:08:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=90.75,printChamber1=90.75,printChamber2=90.75,printChamber3=90.75,printChamber4=90.75 [ControlledHeating.cs@169] -06/14/2026 18:08:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9876245. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1902957. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:08:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:08:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:08:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:08:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.25 [HeaterCheck.cs@67] -06/14/2026 18:08:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 50 [HeaterCheck.cs@67] -06/14/2026 18:08:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=103.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:08:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.06739298502603. Used = 103.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:08:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 442.7041823, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 1.9960146405093737, Elapsed = 00:07:22.7242144, TimeTotal = 06:09:40.4091721, Remaining = 06:02:17.6849577, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3488918, WeightTotalEstimate = 01:03:11.3488918, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8891400, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:22.7242144, HeatingEstimate = 01:02:37.2958177, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4505830, WeightEstimate = 01:03:11.3488918 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:08:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9960146405093737;StartedAtUtc;00:07:22.7242144;06:09:40.4091721;06:02:17.6849577;False;232;0;0;00:00:00;01:03:11.3488918;01:03:11.3488918;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8891400;00:00:00;02:00:00;00:07:22.7242144;01:02:37.2958177;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4505830 [PrintingService.cs@1918] -06/14/2026 18:08:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=91.75,printChamber1=91.75,printChamber2=91.75,printChamber3=91.75,printChamber4=91.75 [ControlledHeating.cs@169] -06/14/2026 18:08:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 50.75 [HeaterCheck.cs@67] -06/14/2026 18:08:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:08:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:08:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.25 [HeaterCheck.cs@67] -06/14/2026 18:08:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:08:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=104.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:08:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.06739298502603. Used = 104.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:08:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 450.2082481, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.0298465864320683, Elapsed = 00:07:30.2282784, TimeTotal = 06:09:40.4091703, Remaining = 06:02:10.1808919, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3488918, WeightTotalEstimate = 01:03:11.3488918, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8891400, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:30.2282784, HeatingEstimate = 01:02:29.7917519, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4505830, WeightEstimate = 01:03:11.3488918 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:08:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0298465864320683;StartedAtUtc;00:07:30.2282784;06:09:40.4091703;06:02:10.1808919;False;232;0;0;00:00:00;01:03:11.3488918;01:03:11.3488918;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8891400;00:00:00;02:00:00;00:07:30.2282784;01:02:29.7917519;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4505830 [PrintingService.cs@1918] -06/14/2026 18:08:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=92.75,printChamber1=92.75,printChamber2=92.75,printChamber3=92.75,printChamber4=92.75 [ControlledHeating.cs@169] -06/14/2026 18:08:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 92.75 with temperature 87.75 [HeaterCheck.cs@67] -06/14/2026 18:08:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:08:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 92.75 with temperature 87.75 [HeaterCheck.cs@67] -06/14/2026 18:08:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:08:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 92.75 with temperature 87.75 [HeaterCheck.cs@67] -06/14/2026 18:08:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 92.75 with temperature 87.75 [HeaterCheck.cs@67] -06/14/2026 18:08:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:08:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 92.75 with temperature 87.75 [HeaterCheck.cs@67] -06/14/2026 18:08:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 50.25 [HeaterCheck.cs@67] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=103.67962646484375, Elapsed=00:00:30.5206305 [ControlledHeating.cs@486] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 103.67962646484375 after 00:00:30.5206861 [ControlledHeating.cs@493] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2231737. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633840. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2874407. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2999190. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:08:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 123006714394 (123006714394 @ 0) for mcu = 1010.488803 [14/06/2026 15:11:43] (1025.0559532833333 sec) to 125421227251 (from now=125301227251, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 123006714394 (123006714394 @ 0) for mcu = 1010.488803 [14/06/2026 15:11:43] (1025.0559532833333 sec) to 125421227251 (from external timestamp, flags=None, requested=125421227251 (125421227251 @ 0) for mcu = 1030.610301 [14/06/2026 15:12:03] (1045.1768937583333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 123006714394 (123006714394 @ 0) for mcu = 1010.488803 [14/06/2026 15:11:43] (1025.0559532833333 sec) to 125421227251 (from external timestamp, flags=None, requested=125421227251 (125421227251 @ 0) for mcu = 1030.610301 [14/06/2026 15:12:03] (1045.1768937583333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 92.75 with temperature 87.75 [HeaterCheck.cs@67] -06/14/2026 18:08:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:08:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:08:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=105.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:08:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.06739298502603. Used = 105.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:08:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 457.7088632, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.0636646898957154, Elapsed = 00:07:37.7292801, TimeTotal = 06:09:40.4095569, Remaining = 06:02:02.6802768, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3488918, WeightTotalEstimate = 01:03:11.3488918, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8891400, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:37.7292801, HeatingEstimate = 01:02:22.2911368, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4505830, WeightEstimate = 01:03:11.3488918 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:08:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0636646898957154;StartedAtUtc;00:07:37.7292801;06:09:40.4095569;06:02:02.6802768;False;232;0;0;00:00:00;01:03:11.3488918;01:03:11.3488918;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8891400;00:00:00;02:00:00;00:07:37.7292801;01:02:22.2911368;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4505830 [PrintingService.cs@1918] -06/14/2026 18:08:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=93.75,printChamber1=93.75,printChamber2=93.75,printChamber3=93.75,printChamber4=93.75 [ControlledHeating.cs@169] -06/14/2026 18:08:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.25 [HeaterCheck.cs@67] -06/14/2026 18:09:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:09:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262864, estimate=49.67586109470827 for layer 10, Z=1.001 [PrintingService.cs@1524] -06/14/2026 18:09:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:09:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 10, island count 7 [PrintingService.cs@1569] -06/14/2026 18:09:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 11, start=0, count=232, Z=1.1010001 [PrintingService.cs@1518] -06/14/2026 18:09:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:09:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=106.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.06739298502603. Used = 106.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 465.2104226, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.094787198820724, Elapsed = 00:07:45.2304430, TimeTotal = 06:10:08.9596147, Remaining = 06:02:23.7291717, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8993461, WeightTotalEstimate = 01:03:39.8993461, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4395943, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:45.2304430, HeatingEstimate = 01:02:14.7895774, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.0010373, WeightEstimate = 01:03:39.8993461 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:09:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.094787198820724;StartedAtUtc;00:07:45.2304430;06:10:08.9596147;06:02:23.7291717;False;232;0;0;00:00:00;01:03:39.8993461;01:03:39.8993461;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4395943;00:00:00;02:00:00;00:07:45.2304430;01:02:14.7895774;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.0010373 [PrintingService.cs@1918] -06/14/2026 18:09:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=94.75,printChamber1=94.75,printChamber2=94.75,printChamber3=94.75,printChamber4=94.75 [ControlledHeating.cs@169] -06/14/2026 18:09:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:09:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9927656. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4067632. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:09:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:09:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:09:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.25 [HeaterCheck.cs@67] -06/14/2026 18:09:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:09:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:09:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 52.5 [HeaterCheck.cs@67] -06/14/2026 18:09:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=107.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.06739298502603. Used = 107.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 472.7115175, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.1285622975287297, Elapsed = 00:07:52.7315411, TimeTotal = 06:10:08.9596179, Remaining = 06:02:16.2280768, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8993461, WeightTotalEstimate = 01:03:39.8993461, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4395943, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:52.7315411, HeatingEstimate = 01:02:07.2884825, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.0010373, WeightEstimate = 01:03:39.8993461 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:09:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1285622975287297;StartedAtUtc;00:07:52.7315411;06:10:08.9596179;06:02:16.2280768;False;232;0;0;00:00:00;01:03:39.8993461;01:03:39.8993461;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4395943;00:00:00;02:00:00;00:07:52.7315411;01:02:07.2884825;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.0010373 [PrintingService.cs@1918] -06/14/2026 18:09:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=95.75,printChamber1=95.75,printChamber2=95.75,printChamber3=95.75,printChamber4=95.75 [ControlledHeating.cs@169] -06/14/2026 18:09:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0961468 ~ 5.99 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:09:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 95.75 with temperature 90.5 [HeaterCheck.cs@88] -06/14/2026 18:09:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 95.75 with temperature 90.75 [HeaterCheck.cs@67] -06/14/2026 18:09:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.5 [HeaterCheck.cs@67] -06/14/2026 18:09:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 95.75 with temperature 90.75 [HeaterCheck.cs@67] -06/14/2026 18:09:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:09:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 95.75 with temperature 91 [HeaterCheck.cs@67] -06/14/2026 18:09:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 53.75 with temperature 39.25 [HeaterCheck.cs@111] -06/14/2026 18:09:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 48.75 [HeaterCheck.cs@67] -06/14/2026 18:09:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49 [HeaterCheck.cs@67] -06/14/2026 18:09:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 53.75 with temperature 49.5 [HeaterCheck.cs@67] -06/14/2026 18:09:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=108.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.06739298502603. Used = 108.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 480.2160339, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.162354595578613, Elapsed = 00:08:00.2364678, TimeTotal = 06:10:08.9600282, Remaining = 06:02:08.7235604, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8993461, WeightTotalEstimate = 01:03:39.8993461, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4395943, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:00.2364678, HeatingEstimate = 01:01:59.7839661, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.0010373, WeightEstimate = 01:03:39.8993461 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:09:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.162354595578613;StartedAtUtc;00:08:00.2364678;06:10:08.9600282;06:02:08.7235604;False;232;0;0;00:00:00;01:03:39.8993461;01:03:39.8993461;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4395943;00:00:00;02:00:00;00:08:00.2364678;01:01:59.7839661;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.0010373 [PrintingService.cs@1918] -06/14/2026 18:09:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=96.75,printChamber1=96.75,printChamber2=96.75,printChamber3=96.75,printChamber4=96.75 [ControlledHeating.cs@169] -06/14/2026 18:09:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 96.75 with temperature 91.57142639160156 [HeaterCheck.cs@88] -06/14/2026 18:09:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=54.75,powderChamber1=54.75,powderChamber2=54.75,powderChamber3=54.75,powderChamber4=54.75 [ControlledHeating.cs@169] -06/14/2026 18:09:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:09:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54.75 with temperature 50 [HeaterCheck.cs@67] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=107.56991577148438, Elapsed=00:00:30.2069300 [ControlledHeating.cs@486] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 107.56991577148438 after 00:00:30.2069868 [ControlledHeating.cs@493] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2875577. SinceCollect=00:01:00.7181237. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2085, gen1=314, gen2=37, LatencyMode=Interactive, FreeMemory=5950668800, Live=442706392, HeapSizeBytes=452622832, FragmentedBytes=10205056, TotalCommittedBytes=460275712, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633158. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0651803. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0766067. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:09:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 126632748479 (126632748479 @ 0) for mcu = 1040.705761 [14/06/2026 15:12:13] (1055.2729039916667 sec) to 129080977475 (from now=128960977475, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 126632748479 (126632748479 @ 0) for mcu = 1040.705761 [14/06/2026 15:12:13] (1055.2729039916667 sec) to 129080977475 (from external timestamp, flags=None, requested=129080977475 (129080977475 @ 0) for mcu = 1061.107910 [14/06/2026 15:12:34] (1075.6748122916667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 126632748479 (126632748479 @ 0) for mcu = 1040.705761 [14/06/2026 15:12:13] (1055.2729039916667 sec) to 129080977475 (from external timestamp, flags=None, requested=129080977475 (129080977475 @ 0) for mcu = 1061.107910 [14/06/2026 15:12:34] (1075.6748122916667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:09:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=109.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 96.75 with temperature 92 [HeaterCheck.cs@67] -06/14/2026 18:09:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.06739298502603. Used = 109.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 487.7186282, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.196134605068693, Elapsed = 00:08:07.7386475, TimeTotal = 06:10:08.9596136, Remaining = 06:02:01.2209661, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8993461, WeightTotalEstimate = 01:03:39.8993461, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4395943, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:07.7386475, HeatingEstimate = 01:01:52.2813718, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.0010373, WeightEstimate = 01:03:39.8993461 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:09:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.196134605068693;StartedAtUtc;00:08:07.7386475;06:10:08.9596136;06:02:01.2209661;False;232;0;0;00:00:00;01:03:39.8993461;01:03:39.8993461;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4395943;00:00:00;02:00:00;00:08:07.7386475;01:01:52.2813718;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.0010373 [PrintingService.cs@1918] -06/14/2026 18:09:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=97.75,printChamber1=97.75,printChamber2=97.75,printChamber3=97.75,printChamber4=97.75 [ControlledHeating.cs@169] -06/14/2026 18:09:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 97.75 with temperature 91.5 [HeaterCheck.cs@88] -06/14/2026 18:09:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=44.25 that are outside of set tolerance 10 for current step target 54.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:09:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 97.75 with temperature 92.75 [HeaterCheck.cs@67] -06/14/2026 18:09:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:09:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 97.75 with temperature 92.75 [HeaterCheck.cs@67] -06/14/2026 18:09:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 97.75 with temperature 93.5 [HeaterCheck.cs@67] -06/14/2026 18:09:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 97.75 with temperature 92.75 [HeaterCheck.cs@67] -06/14/2026 18:09:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=110.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.06739298502603. Used = 110.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 495.2204942, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.22991347205946, Elapsed = 00:08:15.2405840, TimeTotal = 06:10:08.9596841, Remaining = 06:01:53.7191001, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8993461, WeightTotalEstimate = 01:03:39.8993461, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4395943, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:15.2405840, HeatingEstimate = 01:01:44.7795058, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.0010373, WeightEstimate = 01:03:39.8993461 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:09:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.22991347205946;StartedAtUtc;00:08:15.2405840;06:10:08.9596841;06:01:53.7191001;False;232;0;0;00:00:00;01:03:39.8993461;01:03:39.8993461;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4395943;00:00:00;02:00:00;00:08:15.2405840;01:01:44.7795058;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.0010373 [PrintingService.cs@1918] -06/14/2026 18:09:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=98.75,printChamber1=98.75,printChamber2=98.75,printChamber3=98.75,printChamber4=98.75 [ControlledHeating.cs@169] -06/14/2026 18:09:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 98.75 with temperature 93.5 [HeaterCheck.cs@88] -06/14/2026 18:09:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 98.75 with temperature 93.75 [HeaterCheck.cs@67] -06/14/2026 18:09:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9963072. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1882848. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:09:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:09:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:09:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:09:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=111.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.06739298502603. Used = 111.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=87.57142639160156 that are outside of set tolerance 10 for current step target 98.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:09:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351471, estimate=49.20351909491023 for layer 11, Z=1.1010001 [PrintingService.cs@1524] -06/14/2026 18:09:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 11, island count 7 [PrintingService.cs@1569] -06/14/2026 18:09:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 12, start=0, count=232, Z=1.2010001 [PrintingService.cs@1518] -06/14/2026 18:09:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:09:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 503.7248501, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.268061965174807, Elapsed = 00:08:23.7448688, TimeTotal = 06:10:10.3662305, Remaining = 06:01:46.6213617, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.3059636, WeightTotalEstimate = 01:03:41.3059636, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.8462118, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:23.7448688, HeatingEstimate = 01:01:36.2751499, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.4076548, WeightEstimate = 01:03:41.3059636 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:09:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.268061965174807;StartedAtUtc;00:08:23.7448688;06:10:10.3662305;06:01:46.6213617;False;232;0;0;00:00:00;01:03:41.3059636;01:03:41.3059636;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.8462118;00:00:00;02:00:00;00:08:23.7448688;01:01:36.2751499;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.4076548 [PrintingService.cs@1918] -06/14/2026 18:09:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=99.75,printChamber1=99.75,printChamber2=99.75,printChamber3=99.75,printChamber4=99.75 [ControlledHeating.cs@169] -06/14/2026 18:09:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54.75 with temperature 49.75 [HeaterCheck.cs@67] -06/14/2026 18:09:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=112.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.06739298502603. Used = 112.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:51 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=89.42857360839844 that are outside of set tolerance 10 for current step target 99.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:09:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 512.231825, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.3063637953557836, Elapsed = 00:08:32.2518456, TimeTotal = 06:10:10.3662324, Remaining = 06:01:38.1143868, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.3059636, WeightTotalEstimate = 01:03:41.3059636, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.8462118, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:32.2518456, HeatingEstimate = 01:01:27.7681750, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.4076548, WeightEstimate = 01:03:41.3059636 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:09:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3063637953557836;StartedAtUtc;00:08:32.2518456;06:10:10.3662324;06:01:38.1143868;False;232;0;0;00:00:00;01:03:41.3059636;01:03:41.3059636;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.8462118;00:00:00;02:00:00;00:08:32.2518456;01:01:27.7681750;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.4076548 [PrintingService.cs@1918] -06/14/2026 18:09:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=100.75,printChamber1=100.75,printChamber2=100.75,printChamber3=100.75,printChamber4=100.75 [ControlledHeating.cs@169] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=111.7401123046875, Elapsed=00:00:30.4959283 [ControlledHeating.cs@486] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 111.7401123046875 after 00:00:30.4965867 [ControlledHeating.cs@493] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2110796. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632751. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2792826. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2891242. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:09:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 130292498703 (130292498703 @ 0) for mcu = 1071.202799 [14/06/2026 15:12:44] (1085.770822525 sec) to 132706314611 (from now=132586314611, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 130292498703 (130292498703 @ 0) for mcu = 1071.202799 [14/06/2026 15:12:44] (1085.770822525 sec) to 132706314611 (from now=132586314611, flags=None, requested=132706314611 (132706314611 @ 0) for mcu = 1091.317726 [14/06/2026 15:13:04] (1105.8859550916666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 130292498703 (130292498703 @ 0) for mcu = 1071.202799 [14/06/2026 15:12:44] (1085.770822525 sec) to 132706314611 (from now=132586314611, flags=None, requested=132706314611 (132706314611 @ 0) for mcu = 1091.317726 [14/06/2026 15:13:04] (1105.8859550916666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:09:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 100.75 with temperature 95.75 [HeaterCheck.cs@67] -06/14/2026 18:09:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 100.75 with temperature 95.75 [HeaterCheck.cs@67] -06/14/2026 18:09:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=113.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:09:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.06739298502603. Used = 113.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:09:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=89.96428680419922 that are outside of set tolerance 10 for current step target 100.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:10:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 100.75 with temperature 96.5 [HeaterCheck.cs@67] -06/14/2026 18:10:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 520.7318101, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.3446345160598967, Elapsed = 00:08:40.7519148, TimeTotal = 06:10:10.3663165, Remaining = 06:01:29.6144017, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.3059636, WeightTotalEstimate = 01:03:41.3059636, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.8462118, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:40.7519148, HeatingEstimate = 01:01:19.2681899, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.4076548, WeightEstimate = 01:03:41.3059636 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:10:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3446345160598967;StartedAtUtc;00:08:40.7519148;06:10:10.3663165;06:01:29.6144017;False;232;0;0;00:00:00;01:03:41.3059636;01:03:41.3059636;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.8462118;00:00:00;02:00:00;00:08:40.7519148;01:01:19.2681899;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.4076548 [PrintingService.cs@1918] -06/14/2026 18:10:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=101.75,printChamber1=101.75,printChamber2=101.75,printChamber3=101.75,printChamber4=101.75 [ControlledHeating.cs@169] -06/14/2026 18:10:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 101.75 with temperature 96.5 [HeaterCheck.cs@88] -06/14/2026 18:10:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 101.75 with temperature 96.75 [HeaterCheck.cs@67] -06/14/2026 18:10:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54.75 with temperature 50 [HeaterCheck.cs@67] -06/14/2026 18:10:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=114.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.06739298502603. Used = 114.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9914443. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3996313. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:10:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:10:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:10:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 528.2310679, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.37839882137847, Elapsed = 00:08:48.2510887, TimeTotal = 06:10:10.3662326, Remaining = 06:01:22.1151439, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.3059636, WeightTotalEstimate = 01:03:41.3059636, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.8462118, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:48.2510887, HeatingEstimate = 01:01:11.7689321, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.4076548, WeightEstimate = 01:03:41.3059636 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:10:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.37839882137847;StartedAtUtc;00:08:48.2510887;06:10:10.3662326;06:01:22.1151439;False;232;0;0;00:00:00;01:03:41.3059636;01:03:41.3059636;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.8462118;00:00:00;02:00:00;00:08:48.2510887;01:01:11.7689321;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.4076548 [PrintingService.cs@1918] -06/14/2026 18:10:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=102.75,printChamber1=102.75,printChamber2=102.75,printChamber3=102.75,printChamber4=102.75 [ControlledHeating.cs@169] -06/14/2026 18:10:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 102.75 with temperature 96.75 [HeaterCheck.cs@88] -06/14/2026 18:10:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 102.75 with temperature 97.75 [HeaterCheck.cs@67] -06/14/2026 18:10:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=115.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.06739298502603. Used = 115.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1567591 ~ 6 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:10:15 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=92 that are outside of set tolerance 10 for current step target 102.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:10:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 536.731962, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.416673286959721, Elapsed = 00:08:56.7519878, TimeTotal = 06:10:10.3662376, Remaining = 06:01:13.6142498, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.3059636, WeightTotalEstimate = 01:03:41.3059636, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.8462118, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:56.7519878, HeatingEstimate = 01:01:03.2680380, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.4076548, WeightEstimate = 01:03:41.3059636 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:11:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:10:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.416673286959721;StartedAtUtc;00:08:56.7519878;06:10:10.3662376;06:01:13.6142498;False;232;0;0;00:00:00;01:03:41.3059636;01:03:41.3059636;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.8462118;00:00:00;02:00:00;00:08:56.7519878;01:01:03.2680380;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.4076548 [PrintingService.cs@1918] -06/14/2026 18:10:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=103.75,printChamber1=103.75,printChamber2=103.75,printChamber3=103.75,printChamber4=103.75 [ControlledHeating.cs@169] -06/14/2026 18:10:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 54.75 with temperature 43.25 [HeaterCheck.cs@111] -06/14/2026 18:10:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=116.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.06739298502603. Used = 116.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262870, estimate=49.32852384881709 for layer 12, Z=1.2010001 [PrintingService.cs@1524] -06/14/2026 18:10:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 12, island count 7 [PrintingService.cs@1569] -06/14/2026 18:10:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 13, start=0, count=232, Z=1.3010001 [PrintingService.cs@1518] -06/14/2026 18:10:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:10:24 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=93 that are outside of set tolerance 10 for current step target 103.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:10:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 54.75 with temperature 49.75 [HeaterCheck.cs@67] -06/14/2026 18:10:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 545.2412503, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.4477970341281647, Elapsed = 00:09:05.2612733, TimeTotal = 06:11:15.5917136, Remaining = 06:02:10.3304403, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5314424, WeightTotalEstimate = 01:04:46.5314424, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0716906, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:05.2612733, HeatingEstimate = 01:00:54.7587497, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6331336, WeightEstimate = 01:04:46.5314424 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:12:35. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:10:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4477970341281647;StartedAtUtc;00:09:05.2612733;06:11:15.5917136;06:02:10.3304403;False;232;0;0;00:00:00;01:04:46.5314424;01:04:46.5314424;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0716906;00:00:00;02:00:00;00:09:05.2612733;01:00:54.7587497;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6331336 [PrintingService.cs@1918] -06/14/2026 18:10:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=104.75,printChamber1=104.75,printChamber2=104.75,printChamber3=104.75,printChamber4=104.75 [ControlledHeating.cs@169] -06/14/2026 18:10:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 104.75 with temperature 99 [HeaterCheck.cs@88] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=116.14244079589844, Elapsed=00:00:30.2249769 [ControlledHeating.cs@486] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 116.14244079589844 after 00:00:30.2250301 [ControlledHeating.cs@493] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (3 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2934876. SinceCollect=00:01:00.7274272. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2208, gen1=375, gen2=38, LatencyMode=Interactive, FreeMemory=5933285376, Live=442892688, HeapSizeBytes=452763904, FragmentedBytes=10163784, TotalCommittedBytes=460537856, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633460. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0694743. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0855533. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:10:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 133917835839 (133917835839 @ 0) for mcu = 1101.413009 [14/06/2026 15:13:14] (1115.981965325 sec) to 136369430944 (from now=136249430944, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 133917835839 (133917835839 @ 0) for mcu = 1101.413009 [14/06/2026 15:13:14] (1115.981965325 sec) to 136369430944 (from now=136249430944, flags=None, requested=136369430944 (136369430944 @ 0) for mcu = 1121.842531 [14/06/2026 15:13:34] (1136.4119245333334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 133917835839 (133917835839 @ 0) for mcu = 1101.413009 [14/06/2026 15:13:14] (1115.981965325 sec) to 136369430944 (from now=136249430944, flags=None, requested=136369430944 (136369430944 @ 0) for mcu = 1121.842531 [14/06/2026 15:13:34] (1136.4119245333334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:10:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=117.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.06739298502603. Used = 117.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 104.75 with temperature 99.78571319580078 [HeaterCheck.cs@67] -06/14/2026 18:10:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=94 that are outside of set tolerance 10 for current step target 104.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:10:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 553.7430122, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.485963346187301, Elapsed = 00:09:13.7630454, TimeTotal = 06:11:15.5917238, Remaining = 06:02:01.8286784, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5314424, WeightTotalEstimate = 01:04:46.5314424, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0716906, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:13.7630454, HeatingEstimate = 01:00:46.2569878, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6331336, WeightEstimate = 01:04:46.5314424 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:12:35. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:10:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.485963346187301;StartedAtUtc;00:09:13.7630454;06:11:15.5917238;06:02:01.8286784;False;232;0;0;00:00:00;01:04:46.5314424;01:04:46.5314424;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0716906;00:00:00;02:00:00;00:09:13.7630454;01:00:46.2569878;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6331336 [PrintingService.cs@1918] -06/14/2026 18:10:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=105.75,printChamber1=105.75,printChamber2=105.75,printChamber3=105.75,printChamber4=105.75 [ControlledHeating.cs@169] -06/14/2026 18:10:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=118.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.06739298502603. Used = 118.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9892672. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1967184. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:10:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:10:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:10:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=95.25 that are outside of set tolerance 10 for current step target 105.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:10:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 562.2466543, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.5241380021327453, Elapsed = 00:09:22.2666756, TimeTotal = 06:11:15.5917119, Remaining = 06:01:53.3250363, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5314424, WeightTotalEstimate = 01:04:46.5314424, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0716906, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:22.2666756, HeatingEstimate = 01:00:37.7533457, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6331336, WeightEstimate = 01:04:46.5314424 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:12:35. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:10:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5241380021327453;StartedAtUtc;00:09:22.2666756;06:11:15.5917119;06:01:53.3250363;False;232;0;0;00:00:00;01:04:46.5314424;01:04:46.5314424;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0716906;00:00:00;02:00:00;00:09:22.2666756;01:00:37.7533457;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6331336 [PrintingService.cs@1918] -06/14/2026 18:10:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=106.75,printChamber1=106.75,printChamber2=106.75,printChamber3=106.75,printChamber4=106.75 [ControlledHeating.cs@169] -06/14/2026 18:10:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=119.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.06739298502603. Used = 119.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=96.5 that are outside of set tolerance 10 for current step target 106.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:10:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=120.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.06739298502603. Used = 120.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=119.21324920654297, Elapsed=00:00:30.5184847 [ControlledHeating.cs@486] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 119.21324920654297 after 00:00:30.5185442 [ControlledHeating.cs@493] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2281376. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634280. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2938814. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3050737. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:10:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 137580952172 (137580952172 @ 0) for mcu = 1131.938193 [14/06/2026 15:13:44] (1146.5079347666667 sec) to 139995852712 (from now=139875852712, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 137580952172 (137580952172 @ 0) for mcu = 1131.938193 [14/06/2026 15:13:44] (1146.5079347666667 sec) to 139995852712 (from now=139875852712, flags=None, requested=139995852712 (139995852712 @ 0) for mcu = 1152.061889 [14/06/2026 15:14:05] (1166.6321059333334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 137580952172 (137580952172 @ 0) for mcu = 1131.938193 [14/06/2026 15:13:44] (1146.5079347666667 sec) to 139995852712 (from now=139875852712, flags=None, requested=139995852712 (139995852712 @ 0) for mcu = 1152.061889 [14/06/2026 15:14:05] (1166.6321059333334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:10:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:10:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=121.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:10:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.06739298502603. Used = 121.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:10:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 578.7465909, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.5982120583308643, Elapsed = 00:09:38.7671232, TimeTotal = 06:11:15.5922229, Remaining = 06:01:36.8250997, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5314424, WeightTotalEstimate = 01:04:46.5314424, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0716906, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:38.7671232, HeatingEstimate = 01:00:21.2534091, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6331336, WeightEstimate = 01:04:46.5314424 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:12:35. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:10:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5982120583308643;StartedAtUtc;00:09:38.7671232;06:11:15.5922229;06:01:36.8250997;False;232;0;0;00:00:00;01:04:46.5314424;01:04:46.5314424;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0716906;00:00:00;02:00:00;00:09:38.7671232;01:00:21.2534091;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6331336 [PrintingService.cs@1918] -06/14/2026 18:10:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=107.75,printChamber1=107.75,printChamber2=107.75,printChamber3=107.75,printChamber4=107.75 [ControlledHeating.cs@169] -06/14/2026 18:11:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.75 with temperature 50.75 [HeaterCheck.cs@67] -06/14/2026 18:11:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351619, estimate=49.24400542171696 for layer 13, Z=1.3010001 [PrintingService.cs@1524] -06/14/2026 18:11:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=122.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.06739298502603. Used = 122.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 13, island count 7 [PrintingService.cs@1569] -06/14/2026 18:11:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 14, start=0, count=232, Z=1.401 [PrintingService.cs@1518] -06/14/2026 18:11:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:11:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=97.5 that are outside of set tolerance 10 for current step target 107.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:11:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4018255. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:11:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:11:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:11:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=123.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.06739298502603. Used = 123.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1081601 ~ 5.99 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:11:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:11:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.75 with temperature 52.5 [HeaterCheck.cs@67] -06/14/2026 18:11:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 107.75 with temperature 103.5 [HeaterCheck.cs@67] -06/14/2026 18:11:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 107.75 with temperature 103.25 [HeaterCheck.cs@67] -06/14/2026 18:11:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=124.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.06739298502603. Used = 124.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=55.75,powderChamber1=55.75,powderChamber2=55.75,powderChamber3=55.75,powderChamber4=55.75 [ControlledHeating.cs@169] -06/14/2026 18:11:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=123.60469055175781, Elapsed=00:00:30.2053455 [ControlledHeating.cs@486] -06/14/2026 18:11:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 123.60469055175781 after 00:00:30.2087210 [ControlledHeating.cs@493] -06/14/2026 18:11:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2795841. SinceCollect=00:01:00.7177685. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2334, gen1=432, gen2=39, LatencyMode=Interactive, FreeMemory=5927419904, Live=442525920, HeapSizeBytes=452485488, FragmentedBytes=10217320, TotalCommittedBytes=460800000, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631971. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0624118. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0752308. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:11:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 141207373940 (141207373940 @ 0) for mcu = 1162.157756 [14/06/2026 15:14:15] (1176.7281161666667 sec) to 143654525998 (from now=143534525998, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 141207373940 (141207373940 @ 0) for mcu = 1162.157756 [14/06/2026 15:14:15] (1176.7281161666667 sec) to 143654525998 (from now=143534525998, flags=None, requested=143654525998 (143654525998 @ 0) for mcu = 1182.550244 [14/06/2026 15:14:35] (1197.1210499833333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 141207373940 (141207373940 @ 0) for mcu = 1162.157756 [14/06/2026 15:14:15] (1176.7281161666667 sec) to 143654525998 (from now=143534525998, flags=None, requested=143654525998 (143654525998 @ 0) for mcu = 1182.550244 [14/06/2026 15:14:35] (1197.1210499833333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=125.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.06739298502603. Used = 125.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 55.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:11:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=45 that are outside of set tolerance 10 for current step target 55.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:11:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51 [HeaterCheck.cs@67] -06/14/2026 18:11:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 55.75 with temperature 46.25 [HeaterCheck.cs@111] -06/14/2026 18:11:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=126.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.06739298502603. Used = 126.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:11:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9969017. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1829743. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:11:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:11:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:11:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=127.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.06739298502603. Used = 127.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:11:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 107.75 with temperature 95.5 [HeaterCheck.cs@111] -06/14/2026 18:11:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262864, estimate=49.39616773482189 for layer 14, Z=1.401 [PrintingService.cs@1524] -06/14/2026 18:11:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 14, island count 7 [PrintingService.cs@1569] -06/14/2026 18:11:46 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 15, start=0, count=232, Z=1.501 [PrintingService.cs@1518] -06/14/2026 18:11:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:11:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:11:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=128.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.06739298502603. Used = 128.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 107.75 with temperature 102.75 [HeaterCheck.cs@67] -06/14/2026 18:11:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:11:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 636.2679465, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.852199103348199, Elapsed = 00:10:36.2880436, TimeTotal = 06:11:48.6825479, Remaining = 06:01:12.3945043, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.6222026, WeightTotalEstimate = 01:05:19.6222026, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.1624508, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:36.2880436, HeatingEstimate = 00:59:23.7320535, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.7238938, WeightEstimate = 01:05:19.6222026 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:11:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.852199103348199;StartedAtUtc;00:10:36.2880436;06:11:48.6825479;06:01:12.3945043;False;232;0;0;00:00:00;01:05:19.6222026;01:05:19.6222026;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.1624508;00:00:00;02:00:00;00:10:36.2880436;00:59:23.7320535;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.7238938 [PrintingService.cs@1918] -06/14/2026 18:11:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=108.75,printChamber1=108.75,printChamber2=108.75,printChamber3=108.75,printChamber4=108.75 [ControlledHeating.cs@169] -06/14/2026 18:11:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 108.75 with temperature 103.21428680419922 [HeaterCheck.cs@88] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=127.67401885986328, Elapsed=00:00:30.4796553 [ControlledHeating.cs@486] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 127.67401885986328 after 00:00:30.4797139 [ControlledHeating.cs@493] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1978756. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634225. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2642383. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2749170. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:11:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 144866047226 (144866047226 @ 0) for mcu = 1192.646178 [14/06/2026 15:14:45] (1207.2170602166666 sec) to 147278521280 (from now=147158521280, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 144866047226 (144866047226 @ 0) for mcu = 1192.646178 [14/06/2026 15:14:45] (1207.2170602166666 sec) to 147278521280 (from now=147158521280, flags=None, requested=147278521280 (147278521280 @ 0) for mcu = 1212.749748 [14/06/2026 15:15:05] (1227.3210106666668 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 144866047226 (144866047226 @ 0) for mcu = 1192.646178 [14/06/2026 15:14:45] (1207.2170602166666 sec) to 147278521280 (from now=147158521280, flags=None, requested=147278521280 (147278521280 @ 0) for mcu = 1212.749748 [14/06/2026 15:15:05] (1227.3210106666668 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=129.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:11:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.06739298502603. Used = 129.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:11:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:12:00 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/14/2026 18:12:01 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/14/2026 18:12:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/14/2026 18:12:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/14/2026 18:12:01 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/14/2026 18:12:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/14/2026 18:12:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 108.75 with temperature 103.82142639160156 [HeaterCheck.cs@67] -06/14/2026 18:12:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=97.75 that are outside of set tolerance 10 for current step target 108.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:12:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 644.7798469, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.890353886767983, Elapsed = 00:10:44.7998710, TimeTotal = 06:11:48.6824749, Remaining = 06:01:03.8826039, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.6222026, WeightTotalEstimate = 01:05:19.6222026, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.1624508, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:44.7998710, HeatingEstimate = 00:59:15.2201531, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.7238938, WeightEstimate = 01:05:19.6222026 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:12:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.890353886767983;StartedAtUtc;00:10:44.7998710;06:11:48.6824749;06:01:03.8826039;False;232;0;0;00:00:00;01:05:19.6222026;01:05:19.6222026;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.1624508;00:00:00;02:00:00;00:10:44.7998710;00:59:15.2201531;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.7238938 [PrintingService.cs@1918] -06/14/2026 18:12:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=109.75,printChamber1=109.75,printChamber2=109.75,printChamber3=109.75,printChamber4=109.75 [ControlledHeating.cs@169] -06/14/2026 18:12:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=130.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 130.06739298502603. Used = 130.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 109.75 with temperature 104.75 [HeaterCheck.cs@67] -06/14/2026 18:12:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 109.75 with temperature 105 [HeaterCheck.cs@67] -06/14/2026 18:12:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9711040. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3831193. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:12:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:12:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:12:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 109.75 with temperature 104.75 [HeaterCheck.cs@67] -06/14/2026 18:12:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 109.75 with temperature 104.75 [HeaterCheck.cs@67] -06/14/2026 18:12:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 652.2789284, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.9239773474791195, Elapsed = 00:10:52.3008784, TimeTotal = 06:11:48.6844008, Remaining = 06:00:56.3835224, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.6222026, WeightTotalEstimate = 01:05:19.6222026, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.1624508, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:52.3008784, HeatingEstimate = 00:59:07.7210716, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.7238938, WeightEstimate = 01:05:19.6222026 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:12:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9239773474791195;StartedAtUtc;00:10:52.3008784;06:11:48.6844008;06:00:56.3835224;False;232;0;0;00:00:00;01:05:19.6222026;01:05:19.6222026;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.1624508;00:00:00;02:00:00;00:10:52.3008784;00:59:07.7210716;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.7238938 [PrintingService.cs@1918] -06/14/2026 18:12:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=110.75,printChamber1=110.75,printChamber2=110.75,printChamber3=110.75,printChamber4=110.75 [ControlledHeating.cs@169] -06/14/2026 18:12:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 110.75 with temperature 105 [HeaterCheck.cs@88] -06/14/2026 18:12:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=131.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 131.06739298502603. Used = 131.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0705589 ~ 5.99 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:12:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 110.75 with temperature 105.75 [HeaterCheck.cs@67] -06/14/2026 18:12:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:12:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 110.75 with temperature 105.75 [HeaterCheck.cs@67] -06/14/2026 18:12:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 110.75 with temperature 105.75 [HeaterCheck.cs@67] -06/14/2026 18:12:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 110.75 with temperature 106 [HeaterCheck.cs@67] -06/14/2026 18:12:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 110.75 with temperature 106.25 [HeaterCheck.cs@67] -06/14/2026 18:12:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 659.7866757, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.9576228746841875, Elapsed = 00:10:59.8066958, TimeTotal = 06:11:48.6824709, Remaining = 06:00:48.8757751, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.6222026, WeightTotalEstimate = 01:05:19.6222026, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.1624508, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:59.8066958, HeatingEstimate = 00:59:00.2133243, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.7238938, WeightEstimate = 01:05:19.6222026 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:12:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9576228746841875;StartedAtUtc;00:10:59.8066958;06:11:48.6824709;06:00:48.8757751;False;232;0;0;00:00:00;01:05:19.6222026;01:05:19.6222026;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.1624508;00:00:00;02:00:00;00:10:59.8066958;00:59:00.2133243;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.7238938 [PrintingService.cs@1918] -06/14/2026 18:12:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=111.75,printChamber1=111.75,printChamber2=111.75,printChamber3=111.75,printChamber4=111.75 [ControlledHeating.cs@169] -06/14/2026 18:12:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=132.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 132.06739298502603. Used = 132.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 111.75 with temperature 107.5 [HeaterCheck.cs@67] -06/14/2026 18:12:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 55.75 with temperature 42.25 [HeaterCheck.cs@111] -06/14/2026 18:12:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 111.75 with temperature 107 [HeaterCheck.cs@67] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 667.2867391, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 2.9912423275909434, Elapsed = 00:11:07.3067526, TimeTotal = 06:11:48.6824643, Remaining = 06:00:41.3757117, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.6222026, WeightTotalEstimate = 01:05:19.6222026, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.1624508, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:07.3067526, HeatingEstimate = 00:58:52.7132609, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.7238938, WeightEstimate = 01:05:19.6222026 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9912423275909434;StartedAtUtc;00:11:07.3067526;06:11:48.6824643;06:00:41.3757117;False;232;0;0;00:00:00;01:05:19.6222026;01:05:19.6222026;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.1624508;00:00:00;02:00:00;00:11:07.3067526;00:58:52.7132609;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.7238938 [PrintingService.cs@1918] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=112.75,printChamber1=112.75,printChamber2=112.75,printChamber3=112.75,printChamber4=112.75 [ControlledHeating.cs@169] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 112.75 with temperature 106.75 [HeaterCheck.cs@88] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=131.55673217773438, Elapsed=00:00:30.2040117 [ControlledHeating.cs@486] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 131.55673217773438 after 00:00:30.2040784 [ControlledHeating.cs@493] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=133.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 133.06739298502603. Used = 133.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2961848. SinceCollect=00:01:00.6956966. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2455, gen1=451, gen2=40, LatencyMode=Interactive, FreeMemory=5926256640, Live=443104864, HeapSizeBytes=451973984, FragmentedBytes=9237496, TotalCommittedBytes=462880768, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:12:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627146. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0631799. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0799772. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:12:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 148490042508 (148490042508 @ 0) for mcu = 1222.845706 [14/06/2026 15:15:15] (1237.4170209 sec) to 150938834229 (from now=150818834229, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 148490042508 (148490042508 @ 0) for mcu = 1222.845706 [14/06/2026 15:15:15] (1237.4170209 sec) to 150938834229 (from now=150818834229, flags=None, requested=150938834229 (150938834229 @ 0) for mcu = 1243.251967 [14/06/2026 15:15:36] (1257.823618575 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 148490042508 (148490042508 @ 0) for mcu = 1222.845706 [14/06/2026 15:15:15] (1237.4170209 sec) to 150938834229 (from now=150818834229, flags=None, requested=150938834229 (150938834229 @ 0) for mcu = 1243.251967 [14/06/2026 15:15:36] (1257.823618575 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:12:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:12:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351664, estimate=49.20677957506419 for layer 15, Z=1.501 [PrintingService.cs@1524] -06/14/2026 18:12:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 15, island count 7 [PrintingService.cs@1569] -06/14/2026 18:12:31 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 16, start=0, count=232, Z=1.6010001 [PrintingService.cs@1518] -06/14/2026 18:12:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:12:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 55.75 with temperature 46.25 [HeaterCheck.cs@111] -06/14/2026 18:12:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 674.7978012, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.0247171127582217, Elapsed = 00:11:14.8178675, TimeTotal = 06:11:50.1150403, Remaining = 06:00:35.2971728, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.0547258, WeightTotalEstimate = 01:05:21.0547258, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.5949740, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:14.8178675, HeatingEstimate = 00:58:45.2021988, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.1564170, WeightEstimate = 01:05:21.0547258 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:12:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0247171127582217;StartedAtUtc;00:11:14.8178675;06:11:50.1150403;06:00:35.2971728;False;232;0;0;00:00:00;01:05:21.0547258;01:05:21.0547258;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.5949740;00:00:00;02:00:00;00:11:14.8178675;00:58:45.2021988;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.1564170 [PrintingService.cs@1918] -06/14/2026 18:12:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=113.75,printChamber1=113.75,printChamber2=113.75,printChamber3=113.75,printChamber4=113.75 [ControlledHeating.cs@169] -06/14/2026 18:12:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=134.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 134.06739298502603. Used = 134.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9746169. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1874628. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:12:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:12:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:12:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=103.5 that are outside of set tolerance 10 for current step target 113.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:12:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=135.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 135.06739298502603. Used = 135.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 683.2997247, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.062824842422184, Elapsed = 00:11:23.3197444, TimeTotal = 06:11:50.1149937, Remaining = 06:00:26.7952493, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.0547258, WeightTotalEstimate = 01:05:21.0547258, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.5949740, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:23.3197444, HeatingEstimate = 00:58:36.7002753, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.1564170, WeightEstimate = 01:05:21.0547258 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:12:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.062824842422184;StartedAtUtc;00:11:23.3197444;06:11:50.1149937;06:00:26.7952493;False;232;0;0;00:00:00;01:05:21.0547258;01:05:21.0547258;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.5949740;00:00:00;02:00:00;00:11:23.3197444;00:58:36.7002753;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.1564170 [PrintingService.cs@1918] -06/14/2026 18:12:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=114.75,printChamber1=114.75,printChamber2=114.75,printChamber3=114.75,printChamber4=114.75 [ControlledHeating.cs@169] -06/14/2026 18:12:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51 [HeaterCheck.cs@67] -06/14/2026 18:12:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=136.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 136.06739298502603. Used = 136.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=103.75,printChamber4=104.25 that are outside of set tolerance 10 for current step target 114.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:12:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 691.8036689, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.100941822847973, Elapsed = 00:11:31.8236865, TimeTotal = 06:11:50.1149916, Remaining = 06:00:18.2913051, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.0547258, WeightTotalEstimate = 01:05:21.0547258, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.5949740, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:31.8236865, HeatingEstimate = 00:58:28.1963311, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.1564170, WeightEstimate = 01:05:21.0547258 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:12:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.100941822847973;StartedAtUtc;00:11:31.8236865;06:11:50.1149916;06:00:18.2913051;False;232;0;0;00:00:00;01:05:21.0547258;01:05:21.0547258;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.5949740;00:00:00;02:00:00;00:11:31.8236865;00:58:28.1963311;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.1564170 [PrintingService.cs@1918] -06/14/2026 18:12:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=115.75,printChamber1=115.75,printChamber2=115.75,printChamber3=115.75,printChamber4=115.75 [ControlledHeating.cs@169] -06/14/2026 18:12:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:12:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=137.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:12:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 137.06739298502603. Used = 137.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=135.85751342773438, Elapsed=00:00:30.5062168 [ControlledHeating.cs@486] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 135.85751342773438 after 00:00:30.5062772 [ControlledHeating.cs@493] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2186271. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634426. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2826652. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2943083. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:12:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 152150355457 (152150355457 @ 0) for mcu = 1253.348081 [14/06/2026 15:15:46] (1267.9196288083333 sec) to 154564348988 (from now=154444348988, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 152150355457 (152150355457 @ 0) for mcu = 1253.348081 [14/06/2026 15:15:46] (1267.9196288083333 sec) to 154564348988 (from now=154444348988, flags=None, requested=154564348988 (154564348988 @ 0) for mcu = 1273.464454 [14/06/2026 15:16:06] (1288.0362415666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 152150355457 (152150355457 @ 0) for mcu = 1253.348081 [14/06/2026 15:15:46] (1267.9196288083333 sec) to 154564348988 (from now=154444348988, flags=None, requested=154564348988 (154564348988 @ 0) for mcu = 1273.464454 [14/06/2026 15:16:06] (1288.0362415666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:12:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:12:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=104.75,printChamber3=105.25 that are outside of set tolerance 10 for current step target 115.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:13:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:13:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=138.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 138.06739298502603. Used = 138.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:13:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9947792. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4022401. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:13:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:13:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:13:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 709.3040561, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.1793838218974995, Elapsed = 00:11:49.3241904, TimeTotal = 06:11:50.1151083, Remaining = 06:00:00.7909179, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.0547258, WeightTotalEstimate = 01:05:21.0547258, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.5949740, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:49.3241904, HeatingEstimate = 00:58:10.6959439, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.1564170, WeightEstimate = 01:05:21.0547258 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:13:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1793838218974995;StartedAtUtc;00:11:49.3241904;06:11:50.1151083;06:00:00.7909179;False;232;0;0;00:00:00;01:05:21.0547258;01:05:21.0547258;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.5949740;00:00:00;02:00:00;00:11:49.3241904;00:58:10.6959439;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.1564170 [PrintingService.cs@1918] -06/14/2026 18:13:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=116.75,printChamber1=116.75,printChamber2=116.75,printChamber3=116.75,printChamber4=116.75 [ControlledHeating.cs@169] -06/14/2026 18:13:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:13:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=139.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 139.06739298502603. Used = 139.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0686352 ~ 5.99 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:13:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262866, estimate=49.40118652762158 for layer 16, Z=1.6010001 [PrintingService.cs@1524] -06/14/2026 18:13:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 16, island count 7 [PrintingService.cs@1569] -06/14/2026 18:13:15 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 17, start=0, count=232, Z=1.7010001 [PrintingService.cs@1518] -06/14/2026 18:13:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:13:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=105.75 that are outside of set tolerance 10 for current step target 116.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:13:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 717.8087645, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.212383754336791, Elapsed = 00:11:57.8289115, TimeTotal = 06:12:25.6774282, Remaining = 06:00:27.8485167, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.6170330, WeightTotalEstimate = 01:05:56.6170330, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.1572812, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:57.8289115, HeatingEstimate = 00:58:02.1912355, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:23.7187242, WeightEstimate = 01:05:56.6170330 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:13:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.212383754336791;StartedAtUtc;00:11:57.8289115;06:12:25.6774282;06:00:27.8485167;False;232;0;0;00:00:00;01:05:56.6170330;01:05:56.6170330;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.1572812;00:00:00;02:00:00;00:11:57.8289115;00:58:02.1912355;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:23.7187242 [PrintingService.cs@1918] -06/14/2026 18:13:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=117.75,printChamber1=117.75,printChamber2=117.75,printChamber3=117.75,printChamber4=117.75 [ControlledHeating.cs@169] -06/14/2026 18:13:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=140.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 140.06739298502603. Used = 140.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 55.75 with temperature 44.25 [HeaterCheck.cs@111] -06/14/2026 18:13:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=106.75 that are outside of set tolerance 10 for current step target 117.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:13:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=141.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (75 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:13:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 141.06739298502603. Used = 141.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=140.11276245117188, Elapsed=00:00:30.2168844 [ControlledHeating.cs@486] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 140.11276245117188 after 00:00:30.2169506 [ControlledHeating.cs@493] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3970975. SinceCollect=00:01:00.8334819. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2581, gen1=480, gen2=41, LatencyMode=Interactive, FreeMemory=5939150848, Live=442573016, HeapSizeBytes=451487072, FragmentedBytes=9215728, TotalCommittedBytes=460800000, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0615791. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0761604. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0850077. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:13:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 155775870216 (155775870216 @ 0) for mcu = 1283.560493 [14/06/2026 15:16:16] (1298.1322518 sec) to 158239300993 (from now=158119300993, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 155775870216 (155775870216 @ 0) for mcu = 1283.560493 [14/06/2026 15:16:16] (1298.1322518 sec) to 158239300993 (from now=158119300993, flags=None, requested=158239300993 (158239300993 @ 0) for mcu = 1304.088894 [14/06/2026 15:16:37] (1318.6608416083334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 155775870216 (155775870216 @ 0) for mcu = 1283.560493 [14/06/2026 15:16:16] (1298.1322518 sec) to 158239300993 (from now=158119300993, flags=None, requested=158239300993 (158239300993 @ 0) for mcu = 1304.088894 [14/06/2026 15:16:37] (1318.6608416083334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:13:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=142.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 142.06739298502603. Used = 142.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 117.75 with temperature 113.25 [HeaterCheck.cs@67] -06/14/2026 18:13:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 55.75 with temperature 45.25 [HeaterCheck.cs@111] -06/14/2026 18:13:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9989886. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1937517. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:13:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:13:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:13:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=143.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 143.06739298502603. Used = 143.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 117.75 with temperature 113 [HeaterCheck.cs@67] -06/14/2026 18:13:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=144.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 144.06739298502603. Used = 144.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351670, estimate=49.3737281511112 for layer 17, Z=1.7010001 [PrintingService.cs@1524] -06/14/2026 18:13:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 17, island count 7 [PrintingService.cs@1569] -06/14/2026 18:13:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 18, start=0, count=232, Z=1.8010001 [PrintingService.cs@1518] -06/14/2026 18:13:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:13:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:13:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:13:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=145.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:13:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 145.06739298502603. Used = 145.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:13:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=144.55020141601562, Elapsed=00:00:30.6212323 [ControlledHeating.cs@486] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 144.55020141601562 after 00:00:30.6213043 [ControlledHeating.cs@493] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2253514. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0624093. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2898993. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3013019. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:13:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 159450822221 (159450822221 @ 0) for mcu = 1314.185002 [14/06/2026 15:16:47] (1328.7568518416667 sec) to 161865250049 (from now=161745250049, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 159450822221 (159450822221 @ 0) for mcu = 1314.185002 [14/06/2026 15:16:47] (1328.7568518416667 sec) to 161865250049 (from now=161745250049, flags=None, requested=161865250049 (161865250049 @ 0) for mcu = 1334.305116 [14/06/2026 15:17:07] (1348.8770837416666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 159450822221 (159450822221 @ 0) for mcu = 1314.185002 [14/06/2026 15:16:47] (1328.7568518416667 sec) to 161865250049 (from now=161745250049, flags=None, requested=161865250049 (161865250049 @ 0) for mcu = 1334.305116 [14/06/2026 15:17:07] (1348.8770837416666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:13:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:14:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:14:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:14:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.75 with temperature 113.25 [HeaterCheck.cs@67] -06/14/2026 18:14:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=146.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 146.06739298502603. Used = 146.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:14:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51 [HeaterCheck.cs@67] -06/14/2026 18:14:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 117.75 with temperature 100.57142639160156 [HeaterCheck.cs@111] -06/14/2026 18:14:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9880198. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4089721. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:14:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:14:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:14:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:14:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=147.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 147.06739298502603. Used = 147.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.1351778 ~ 5.85 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:14:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:14:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:14:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=148.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 148.06739298502603. Used = 148.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:14:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:14:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:14:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=149.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (676 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:14:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 149.06739298502603. Used = 149.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=148.39414978027344, Elapsed=00:00:30.1982123 [ControlledHeating.cs@486] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 148.39414978027344 after 00:00:30.1982729 [ControlledHeating.cs@493] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 55.75 with temperature 44.5 [HeaterCheck.cs@111] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4090484. SinceCollect=00:01:00.8336093. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2699, gen1=500, gen2=42, LatencyMode=Interactive, FreeMemory=5915541504, Live=442776784, HeapSizeBytes=446061320, FragmentedBytes=3712048, TotalCommittedBytes=455426048, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633802. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0675963. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0820072. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:14:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 163076771277 (163076771277 @ 0) for mcu = 1344.401253 [14/06/2026 15:17:17] (1358.973093975 sec) to 165539471531 (from now=165419471531, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 163076771277 (163076771277 @ 0) for mcu = 1344.401253 [14/06/2026 15:17:17] (1358.973093975 sec) to 165539471531 (from now=165419471531, flags=None, requested=165539471531 (165539471531 @ 0) for mcu = 1364.923701 [14/06/2026 15:17:37] (1379.4955960916666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 163076771277 (163076771277 @ 0) for mcu = 1344.401253 [14/06/2026 15:17:17] (1358.973093975 sec) to 165539471531 (from now=165419471531, flags=None, requested=165539471531 (165539471531 @ 0) for mcu = 1364.923701 [14/06/2026 15:17:37] (1379.4955960916666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:14:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:14:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262844, estimate=49.38484317466119 for layer 18, Z=1.8010001 [PrintingService.cs@1524] -06/14/2026 18:14:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 18, island count 7 [PrintingService.cs@1569] -06/14/2026 18:14:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 19, start=0, count=232, Z=1.901 [PrintingService.cs@1518] -06/14/2026 18:14:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:14:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=150.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 150.06739298502603. Used = 150.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:14:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1884599. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:14:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:14:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:14:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 55.75 with temperature 45.5 [HeaterCheck.cs@111] -06/14/2026 18:14:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=151.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 151.06739298502603. Used = 151.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:14:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.5 [HeaterCheck.cs@67] -06/14/2026 18:14:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 117.75 with temperature 112.75 [HeaterCheck.cs@67] -06/14/2026 18:14:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=152.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 152.06739298502603. Used = 152.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.75 with temperature 51.25 [HeaterCheck.cs@67] -06/14/2026 18:14:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=56.75,powderChamber1=56.75,powderChamber2=56.75,powderChamber3=56.75,powderChamber4=56.75 [ControlledHeating.cs@169] -06/14/2026 18:14:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:14:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:14:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:14:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:14:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:14:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=153.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:14:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 153.06739298502603. Used = 153.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=152.91226196289062, Elapsed=00:00:30.6123627 [ControlledHeating.cs@486] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 152.91226196289062 after 00:00:30.6129426 [ControlledHeating.cs@493] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2026637. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633362. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2703394. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2851113. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:14:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 166750992759 (166750992759 @ 0) for mcu = 1375.019840 [14/06/2026 15:17:48] (1389.591606325 sec) to 169163330649 (from now=169043330649, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 166750992759 (166750992759 @ 0) for mcu = 1375.019840 [14/06/2026 15:17:48] (1389.591606325 sec) to 169163330649 (from external timestamp, flags=None, requested=169163330649 (169163330649 @ 0) for mcu = 1395.122660 [14/06/2026 15:18:08] (1409.694422075 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 166750992759 (166750992759 @ 0) for mcu = 1375.019840 [14/06/2026 15:17:48] (1389.591606325 sec) to 169163330649 (from external timestamp, flags=None, requested=169163330649 (169163330649 @ 0) for mcu = 1395.122660 [14/06/2026 15:18:08] (1409.694422075 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:14:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:15:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=46.25,powderChamber4=46 that are outside of set tolerance 10 for current step target 56.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:15:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.5 [HeaterCheck.cs@67] -06/14/2026 18:15:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.5 [HeaterCheck.cs@67] -06/14/2026 18:15:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:15:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:15:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=154.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 154.06739298502603. Used = 154.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:15:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:15:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9979065. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3928695. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:15:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:15:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:15:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=155.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 155.06739298502603. Used = 155.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0899489 ~ 5.99 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:15:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 835.5669262, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.7391130273040765, Elapsed = 00:13:55.5869639, TimeTotal = 06:12:27.1972577, Remaining = 05:58:31.6102938, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.1369718, WeightTotalEstimate = 01:05:58.1369718, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.6772200, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:13:55.5869639, HeatingEstimate = 00:56:04.4330738, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.2386630, WeightEstimate = 01:05:58.1369718 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:47. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:15:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.7391130273040765;StartedAtUtc;00:13:55.5869639;06:12:27.1972577;05:58:31.6102938;False;232;0;0;00:00:00;01:05:58.1369718;01:05:58.1369718;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.6772200;00:00:00;02:00:00;00:13:55.5869639;00:56:04.4330738;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.2386630 [PrintingService.cs@1918] -06/14/2026 18:15:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=118.75,printChamber1=118.75,printChamber2=118.75,printChamber3=118.75,printChamber4=118.75 [ControlledHeating.cs@169] -06/14/2026 18:15:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:15:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351522, estimate=49.14286837504563 for layer 19, Z=1.901 [PrintingService.cs@1524] -06/14/2026 18:15:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 19, island count 7 [PrintingService.cs@1569] -06/14/2026 18:15:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 20, start=0, count=232, Z=2.001 [PrintingService.cs@1518] -06/14/2026 18:15:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:15:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:15:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=156.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 156.06739298502603. Used = 156.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:15:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=107.75 that are outside of set tolerance 10 for current step target 118.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:15:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 844.0792125, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.776974770472879, Elapsed = 00:14:04.0992501, TimeTotal = 06:12:28.5541047, Remaining = 05:58:24.4548546, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:59.4938189, WeightTotalEstimate = 01:05:59.4938189, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:06.0340671, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:04.0992501, HeatingEstimate = 00:55:55.9207875, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:26.5955101, WeightEstimate = 01:05:59.4938189 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:15:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.776974770472879;StartedAtUtc;00:14:04.0992501;06:12:28.5541047;05:58:24.4548546;False;232;0;0;00:00:00;01:05:59.4938189;01:05:59.4938189;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:06.0340671;00:00:00;02:00:00;00:14:04.0992501;00:55:55.9207875;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:26.5955101 [PrintingService.cs@1918] -06/14/2026 18:15:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=119.75,printChamber1=119.75,printChamber2=119.75,printChamber3=119.75,printChamber4=119.75 [ControlledHeating.cs@169] -06/14/2026 18:15:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.5 [HeaterCheck.cs@67] -06/14/2026 18:15:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 119.75 with temperature 114.25 [HeaterCheck.cs@88] -06/14/2026 18:15:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.75 with temperature 114.75 [HeaterCheck.cs@67] -06/14/2026 18:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.75 with temperature 115.25 [HeaterCheck.cs@67] -06/14/2026 18:15:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.75 with temperature 114.75 [HeaterCheck.cs@67] -06/14/2026 18:15:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:15:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=157.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 157.06739298502603. Used = 157.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.75 with temperature 114.75 [HeaterCheck.cs@67] -06/14/2026 18:15:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 119.75 with temperature 114.75 [HeaterCheck.cs@67] -06/14/2026 18:15:29 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (253 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=157.1818389892578, Elapsed=00:00:30.2065282 [ControlledHeating.cs@486] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 157.1818389892578 after 00:00:30.2065908 [ControlledHeating.cs@493] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2941495. SinceCollect=00:01:00.7023038. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2816, gen1=535, gen2=43, LatencyMode=Interactive, FreeMemory=5917081600, Live=442479000, HeapSizeBytes=445783056, FragmentedBytes=3594872, TotalCommittedBytes=455163904, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628915. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0652051. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0781543. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:15:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 170374851877 (170374851877 @ 0) for mcu = 1405.218789 [14/06/2026 15:18:18] (1419.7904323083333 sec) to 172822789763 (from now=172702789763, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 170374851877 (170374851877 @ 0) for mcu = 1405.218789 [14/06/2026 15:18:18] (1419.7904323083333 sec) to 172822789763 (from external timestamp, flags=None, requested=172822789763 (172822789763 @ 0) for mcu = 1425.618318 [14/06/2026 15:18:38] (1440.1899146916667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 170374851877 (170374851877 @ 0) for mcu = 1405.218789 [14/06/2026 15:18:18] (1419.7904323083333 sec) to 172822789763 (from external timestamp, flags=None, requested=172822789763 (172822789763 @ 0) for mcu = 1425.618318 [14/06/2026 15:18:38] (1440.1899146916667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:15:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.75 with temperature 115.25 [HeaterCheck.cs@67] -06/14/2026 18:15:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 851.5876951, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.8105807470869237, Elapsed = 00:14:11.6097779, TimeTotal = 06:12:28.5561499, Remaining = 05:58:16.9463720, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:59.4938189, WeightTotalEstimate = 01:05:59.4938189, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:06.0340671, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:11.6097779, HeatingEstimate = 00:55:48.4123049, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:26.5955101, WeightEstimate = 01:05:59.4938189 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:15:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.8105807470869237;StartedAtUtc;00:14:11.6097779;06:12:28.5561499;05:58:16.9463720;False;232;0;0;00:00:00;01:05:59.4938189;01:05:59.4938189;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:06.0340671;00:00:00;02:00:00;00:14:11.6097779;00:55:48.4123049;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:26.5955101 [PrintingService.cs@1918] -06/14/2026 18:15:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=120.75,printChamber1=120.75,printChamber2=120.75,printChamber3=120.75,printChamber4=120.75 [ControlledHeating.cs@169] -06/14/2026 18:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 120.75 with temperature 115.32142639160156 [HeaterCheck.cs@88] -06/14/2026 18:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 120.75 with temperature 114.25 [HeaterCheck.cs@88] -06/14/2026 18:15:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=158.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 158.06739298502603. Used = 158.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 120.75 with temperature 117 [HeaterCheck.cs@67] -06/14/2026 18:15:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 859.0913412, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.844147568385043, Elapsed = 00:14:19.1114000, TimeTotal = 06:12:28.5541259, Remaining = 05:58:09.4427259, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:59.4938189, WeightTotalEstimate = 01:05:59.4938189, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:06.0340671, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:19.1114000, HeatingEstimate = 00:55:40.9086588, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:26.5955101, WeightEstimate = 01:05:59.4938189 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:15:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.844147568385043;StartedAtUtc;00:14:19.1114000;06:12:28.5541259;05:58:09.4427259;False;232;0;0;00:00:00;01:05:59.4938189;01:05:59.4938189;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:06.0340671;00:00:00;02:00:00;00:14:19.1114000;00:55:40.9086588;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:26.5955101 [PrintingService.cs@1918] -06/14/2026 18:15:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=121.75,printChamber1=121.75,printChamber2=121.75,printChamber3=121.75,printChamber4=121.75 [ControlledHeating.cs@169] -06/14/2026 18:15:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:15:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 121.75 with temperature 116.25 [HeaterCheck.cs@88] -06/14/2026 18:15:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 121.75 with temperature 116.75 [HeaterCheck.cs@67] -06/14/2026 18:15:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 121.75 with temperature 117 [HeaterCheck.cs@67] -06/14/2026 18:15:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:15:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9891048. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1871239. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:15:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:15:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:15:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=159.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 159.06739298502603. Used = 159.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 121.75 with temperature 117.75 [HeaterCheck.cs@67] -06/14/2026 18:15:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:15:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 866.5912939, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 3.877706398399768, Elapsed = 00:14:26.6113117, TimeTotal = 06:12:28.5540849, Remaining = 05:58:01.9427732, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:59.4938189, WeightTotalEstimate = 01:05:59.4938189, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:06.0340671, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:26.6113117, HeatingEstimate = 00:55:33.4087061, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:26.5955101, WeightEstimate = 01:05:59.4938189 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:13:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:15:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.877706398399768;StartedAtUtc;00:14:26.6113117;06:12:28.5540849;05:58:01.9427732;False;232;0;0;00:00:00;01:05:59.4938189;01:05:59.4938189;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:06.0340671;00:00:00;02:00:00;00:14:26.6113117;00:55:33.4087061;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:26.5955101 [PrintingService.cs@1918] -06/14/2026 18:15:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=122.75,printChamber1=122.75,printChamber2=122.75,printChamber3=122.75,printChamber4=122.75 [ControlledHeating.cs@169] -06/14/2026 18:15:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 56.75 with temperature 44.5 [HeaterCheck.cs@111] -06/14/2026 18:15:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:15:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 56.75 with temperature 51.92856979370117 [HeaterCheck.cs@67] -06/14/2026 18:15:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=160.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 160.06739298502603. Used = 160.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:15:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 54.5 [HeaterCheck.cs@67] -06/14/2026 18:15:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=111.75 that are outside of set tolerance 10 for current step target 122.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:15:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262846, estimate=49.340932089113515 for layer 20, Z=2.001 [PrintingService.cs@1524] -06/14/2026 18:15:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 20, island count 7 [PrintingService.cs@1569] -06/14/2026 18:15:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 21, start=0, count=232, Z=2.101 [PrintingService.cs@1518] -06/14/2026 18:15:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:15:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=161.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:15:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 161.06739298502603. Used = 161.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:15:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=161.2252960205078, Elapsed=00:00:30.4964680 [ControlledHeating.cs@486] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 161.2252960205078 after 00:00:30.4967821 [ControlledHeating.cs@493] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2025060. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633474. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2690043. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2828522. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:16:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 174034310991 (174034310991 @ 0) for mcu = 1435.714429 [14/06/2026 15:18:48] (1450.285924925 sec) to 176447314022 (from now=176327314022, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 174034310991 (174034310991 @ 0) for mcu = 1435.714429 [14/06/2026 15:18:48] (1450.285924925 sec) to 176447314022 (from external timestamp, flags=None, requested=176447314022 (176447314022 @ 0) for mcu = 1455.822862 [14/06/2026 15:19:08] (1470.3942835166667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 174034310991 (174034310991 @ 0) for mcu = 1435.714429 [14/06/2026 15:18:48] (1450.285924925 sec) to 176447314022 (from external timestamp, flags=None, requested=176447314022 (176447314022 @ 0) for mcu = 1455.822862 [14/06/2026 15:19:08] (1470.3942835166667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 56.75 with temperature 46.5 [HeaterCheck.cs@111] -06/14/2026 18:16:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=162.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:16:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 162.06739298502603. Used = 162.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:16:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9896595. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3915413. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:16:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:16:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:16:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:16:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=163.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:16:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 163.06739298502603. Used = 163.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:16:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1007993 ~ 5.99 samples/sec, 5 resets, 4 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:16:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 122.75 with temperature 117.75 [HeaterCheck.cs@67] -06/14/2026 18:16:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.5 [HeaterCheck.cs@67] -06/14/2026 18:16:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=164.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:16:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 164.06739298502603. Used = 164.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:16:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.5 [HeaterCheck.cs@67] -06/14/2026 18:16:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 122.75 with temperature 117.75 [HeaterCheck.cs@67] -06/14/2026 18:16:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 122.75 with temperature 117.75 [HeaterCheck.cs@67] -06/14/2026 18:16:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 122.75 with temperature 117.75 [HeaterCheck.cs@67] -06/14/2026 18:16:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=165.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:16:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 165.06739298502603. Used = 165.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:16:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=164.7770233154297, Elapsed=00:00:30.2030940 [ControlledHeating.cs@486] -06/14/2026 18:16:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 164.7770233154297 after 00:00:30.2031609 [ControlledHeating.cs@493] -06/14/2026 18:16:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:16:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (296 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:16:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 122.75 with temperature 108.65625 [HeaterCheck.cs@111] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 122.75 with temperature 118.25 [HeaterCheck.cs@67] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:01.8561405. SinceCollect=00:01:02.2662029. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2935, gen1=550, gen2=45, LatencyMode=Interactive, FreeMemory=5975015424, Live=445795080, HeapSizeBytes=443109912, FragmentedBytes=453840, TotalCommittedBytes=444497920, PinnedObjectsCount=1, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634183. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0624928. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0784802. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:16:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 177658835250 (177658835250 @ 0) for mcu = 1465.918962 [14/06/2026 15:19:18] (1480.49029375 sec) to 180294737923 (from now=180174737923, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 177658835250 (177658835250 @ 0) for mcu = 1465.918962 [14/06/2026 15:19:18] (1480.49029375 sec) to 180294737923 (from external timestamp, flags=None, requested=180294737923 (180294737923 @ 0) for mcu = 1487.884910 [14/06/2026 15:19:40] (1502.4561493583333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 177658835250 (177658835250 @ 0) for mcu = 1465.918962 [14/06/2026 15:19:18] (1480.49029375 sec) to 180294737923 (from external timestamp, flags=None, requested=180294737923 (180294737923 @ 0) for mcu = 1487.884910 [14/06/2026 15:19:40] (1502.4561493583333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:16:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:16:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=166.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:16:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 166.06739298502603. Used = 166.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:16:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52 [HeaterCheck.cs@67] -06/14/2026 18:16:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:16:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 52.25 [HeaterCheck.cs@67] -06/14/2026 18:16:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351511, estimate=49.27282762504052 for layer 21, Z=2.101 [PrintingService.cs@1524] -06/14/2026 18:16:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 21, island count 7 [PrintingService.cs@1569] -06/14/2026 18:16:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 22, start=0, count=232, Z=2.201 [PrintingService.cs@1518] -06/14/2026 18:16:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:16:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=167.06739298502603 [ControlledHeating.cs@169] -06/14/2026 18:16:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 167.06739298502603. Used = 167.06739298502603 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:16:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9822493. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1843248. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:16:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:16:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:16:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.75 with temperature 51.75 [HeaterCheck.cs@67] -06/14/2026 18:16:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=57.75,powderChamber1=57.75,powderChamber2=57.75,powderChamber3=57.75,powderChamber4=57.75 [ControlledHeating.cs@169] -06/14/2026 18:16:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 57.75 with temperature 51.5 [HeaterCheck.cs@88] -06/14/2026 18:16:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.5 [HeaterCheck.cs@67] -06/14/2026 18:16:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 57.75 with temperature 45 [HeaterCheck.cs@111] -06/14/2026 18:16:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=168 [ControlledHeating.cs@169] -06/14/2026 18:16:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 168. Used = 168 [SoftAnalysisSurfaceHeater.cs@881] -06/14/2026 18:16:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 57.75 with temperature 53.17856979370117 [HeaterCheck.cs@67] -06/14/2026 18:16:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=46.75,powderChamber4=46.75 that are outside of set tolerance 10 for current step target 57.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:16:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 122.75 with temperature 118.25 [HeaterCheck.cs@67] -06/14/2026 18:16:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 122.75 with temperature 117.75 [HeaterCheck.cs@67] -06/14/2026 18:16:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 122.75 with temperature 118 [HeaterCheck.cs@67] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.69252014160156, Elapsed=00:00:30.0610614 [ControlledHeating.cs@486] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.69252014160156 after 00:00:30.0611223 [ControlledHeating.cs@493] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:28.2007493. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631270. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:28.2651674. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:28.2761544. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:17:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 181506259151 (181506259151 @ 0) for mcu = 1497.981129 [14/06/2026 15:19:50] (1512.5521595916666 sec) to 183678436389 (from now=183558436389, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 181506259151 (181506259151 @ 0) for mcu = 1497.981129 [14/06/2026 15:19:50] (1512.5521595916666 sec) to 183678436389 (from external timestamp, flags=None, requested=183678436389 (183678436389 @ 0) for mcu = 1516.082727 [14/06/2026 15:20:09] (1530.653636575 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 181506259151 (181506259151 @ 0) for mcu = 1497.981129 [14/06/2026 15:19:50] (1512.5521595916666 sec) to 183678436389 (from external timestamp, flags=None, requested=183678436389 (183678436389 @ 0) for mcu = 1516.082727 [14/06/2026 15:20:09] (1530.653636575 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/14/2026 18:17:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/14/2026 18:17:01 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/14/2026 18:17:01 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/14/2026 18:17:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/14/2026 18:17:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 122.75 with temperature 117.75 [HeaterCheck.cs@67] -06/14/2026 18:17:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 57.75 with temperature 48.25 [HeaterCheck.cs@111] -06/14/2026 18:17:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 950.4945145, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.247054225355158, Elapsed = 00:15:50.5145781, TimeTotal = 06:13:00.5613883, Remaining = 05:57:10.0468102, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:31.5010765, WeightTotalEstimate = 01:06:31.5010765, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:38.0413247, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:50.5145781, HeatingEstimate = 00:54:09.5054855, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:58.6027677, WeightEstimate = 01:06:31.5010765 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:14:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:17:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.247054225355158;StartedAtUtc;00:15:50.5145781;06:13:00.5613883;05:57:10.0468102;False;232;0;0;00:00:00;01:06:31.5010765;01:06:31.5010765;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:38.0413247;00:00:00;02:00:00;00:15:50.5145781;00:54:09.5054855;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:58.6027677 [PrintingService.cs@1918] -06/14/2026 18:17:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=123.75,printChamber1=123.75,printChamber2=123.75,printChamber3=123.75,printChamber4=123.75 [ControlledHeating.cs@169] -06/14/2026 18:17:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9971489. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.3850395. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:17:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:17:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:17:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 123.75 with temperature 119 [HeaterCheck.cs@67] -06/14/2026 18:17:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 123.75 with temperature 118.75 [HeaterCheck.cs@67] -06/14/2026 18:17:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0675016 ~ 5.94 samples/sec, 5 resets, 4 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:17:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 123.75 with temperature 119 [HeaterCheck.cs@67] -06/14/2026 18:17:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.5 [HeaterCheck.cs@67] -06/14/2026 18:17:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 123.75 with temperature 119.5 [HeaterCheck.cs@67] -06/14/2026 18:17:18 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=112.85713958740234 that are outside of set tolerance 10 for current step target 123.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:17:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262856, estimate=49.65321790685682 for layer 22, Z=2.201 [PrintingService.cs@1524] -06/14/2026 18:17:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 22, island count 7 [PrintingService.cs@1569] -06/14/2026 18:17:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 23, start=0, count=232, Z=2.3009999 [PrintingService.cs@1518] -06/14/2026 18:17:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:17:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 959.0003418, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.279819751159859, Elapsed = 00:15:59.0204062, TimeTotal = 06:13:27.9625302, Remaining = 05:57:28.9421240, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:58.9022176, WeightTotalEstimate = 01:06:58.9022176, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:05.4424658, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:59.0204062, HeatingEstimate = 00:54:00.9996582, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:18:26.0039088, WeightEstimate = 01:06:58.9022176 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:14:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:17:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.279819751159859;StartedAtUtc;00:15:59.0204062;06:13:27.9625302;05:57:28.9421240;False;232;0;0;00:00:00;01:06:58.9022176;01:06:58.9022176;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:05.4424658;00:00:00;02:00:00;00:15:59.0204062;00:54:00.9996582;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:18:26.0039088 [PrintingService.cs@1918] -06/14/2026 18:17:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=124.75,printChamber1=124.75,printChamber2=124.75,printChamber3=124.75,printChamber4=124.75 [ControlledHeating.cs@169] -06/14/2026 18:17:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 124.75 with temperature 119.5 [HeaterCheck.cs@88] -06/14/2026 18:17:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 124.75 with temperature 119.25 [HeaterCheck.cs@88] -06/14/2026 18:17:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 124.75 with temperature 120.5 [HeaterCheck.cs@67] -06/14/2026 18:17:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 124.75 with temperature 119.75 [HeaterCheck.cs@67] -06/14/2026 18:17:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 966.4984124, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.31328165418274, Elapsed = 00:16:06.5185396, TimeTotal = 06:13:27.9625930, Remaining = 05:57:21.4440534, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:58.9022176, WeightTotalEstimate = 01:06:58.9022176, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:05.4424658, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:06.5185396, HeatingEstimate = 00:53:53.5015876, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:18:26.0039088, WeightEstimate = 01:06:58.9022176 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:14:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:17:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.31328165418274;StartedAtUtc;00:16:06.5185396;06:13:27.9625930;05:57:21.4440534;False;232;0;0;00:00:00;01:06:58.9022176;01:06:58.9022176;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:05.4424658;00:00:00;02:00:00;00:16:06.5185396;00:53:53.5015876;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:18:26.0039088 [PrintingService.cs@1918] -06/14/2026 18:17:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=125.75,printChamber1=125.75,printChamber2=125.75,printChamber3=125.75,printChamber4=125.75 [ControlledHeating.cs@169] -06/14/2026 18:17:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.21823120117188, Elapsed=00:00:30.2000681 [ControlledHeating.cs@486] -06/14/2026 18:17:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.21823120117188 after 00:00:30.2003929 [ControlledHeating.cs@493] -06/14/2026 18:17:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.4016503. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:17:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633608. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.4664242. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.4789969. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:17:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 184889957617 (184889957617 @ 0) for mcu = 1526.178935 [14/06/2026 15:20:19] (1540.7496468083334 sec) to 187302763504 (from now=187182763504, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 184889957617 (184889957617 @ 0) for mcu = 1526.178935 [14/06/2026 15:20:19] (1540.7496468083334 sec) to 187302763504 (from external timestamp, flags=None, requested=187302763504 (187302763504 @ 0) for mcu = 1546.285834 [14/06/2026 15:20:39] (1560.8563625333334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 184889957617 (184889957617 @ 0) for mcu = 1526.178935 [14/06/2026 15:20:19] (1540.7496468083334 sec) to 187302763504 (from external timestamp, flags=None, requested=187302763504 (187302763504 @ 0) for mcu = 1546.285834 [14/06/2026 15:20:39] (1560.8563625333334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:17:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (341 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 974.0003547, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.346760111276752, Elapsed = 00:16:14.0203751, TimeTotal = 06:13:27.9624862, Remaining = 05:57:13.9421111, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:58.9022176, WeightTotalEstimate = 01:06:58.9022176, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:05.4424658, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:14.0203751, HeatingEstimate = 00:53:45.9996453, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:18:26.0039088, WeightEstimate = 01:06:58.9022176 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:14:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.346760111276752;StartedAtUtc;00:16:14.0203751;06:13:27.9624862;05:57:13.9421111;False;232;0;0;00:00:00;01:06:58.9022176;01:06:58.9022176;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:05.4424658;00:00:00;02:00:00;00:16:14.0203751;00:53:45.9996453;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:18:26.0039088 [PrintingService.cs@1918] -06/14/2026 18:17:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=126.75,printChamber1=126.75,printChamber2=126.75,printChamber3=126.75,printChamber4=126.75 [ControlledHeating.cs@169] -06/14/2026 18:17:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:17:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 126.75 with temperature 121.75 [HeaterCheck.cs@67] -06/14/2026 18:17:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:17:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:17:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 981.5148909, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.3802952336196395, Elapsed = 00:16:21.5349128, TimeTotal = 06:13:27.9624877, Remaining = 05:57:06.4275749, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:58.9022176, WeightTotalEstimate = 01:06:58.9022176, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:05.4424658, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:21.5349128, HeatingEstimate = 00:53:38.4851091, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:18:26.0039088, WeightEstimate = 01:06:58.9022176 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:14:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:17:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.3802952336196395;StartedAtUtc;00:16:21.5349128;06:13:27.9624877;05:57:06.4275749;False;232;0;0;00:00:00;01:06:58.9022176;01:06:58.9022176;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:05.4424658;00:00:00;02:00:00;00:16:21.5349128;00:53:38.4851091;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:18:26.0039088 [PrintingService.cs@1918] -06/14/2026 18:17:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=127.75,printChamber1=127.75,printChamber2=127.75,printChamber3=127.75,printChamber4=127.75 [ControlledHeating.cs@169] -06/14/2026 18:17:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9930440. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:17:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9930440. Loops = 44. GC duration = 00:00:00.2944431. SinceCollect=00:01:09.8812731. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:17:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3065, gen1=562, gen2=46, LatencyMode=Interactive, FreeMemory=5745606656, Live=442842752, HeapSizeBytes=509748920, FragmentedBytes=67344000, TotalCommittedBytes=520781824, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:17:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:17:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:17:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.75 with temperature 123 [HeaterCheck.cs@67] -06/14/2026 18:17:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=117 that are outside of set tolerance 10 for current step target 127.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:17:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 57.75 with temperature 43.5 [HeaterCheck.cs@111] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.94558715820312, Elapsed=00:00:30.4990007 [ControlledHeating.cs@486] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.94558715820312 after 00:00:30.4990651 [ControlledHeating.cs@493] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0221248. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633412. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0856706. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0999248. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:18:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 188514284732 (188514284732 @ 0) for mcu = 1556.381953 [14/06/2026 15:20:49] (1570.9523727666667 sec) to 190963070079 (from now=190843070079, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 188514284732 (188514284732 @ 0) for mcu = 1556.381953 [14/06/2026 15:20:49] (1570.9523727666667 sec) to 190963070079 (from external timestamp, flags=None, requested=190963070079 (190963070079 @ 0) for mcu = 1576.788688 [14/06/2026 15:21:09] (1591.358917325 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 188514284732 (188514284732 @ 0) for mcu = 1556.381953 [14/06/2026 15:20:49] (1570.9523727666667 sec) to 190963070079 (from external timestamp, flags=None, requested=190963070079 (190963070079 @ 0) for mcu = 1576.788688 [14/06/2026 15:21:09] (1591.358917325 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.75 with temperature 122.75 [HeaterCheck.cs@67] -06/14/2026 18:18:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351744, estimate=49.244350059439356 for layer 23, Z=2.3009999 [PrintingService.cs@1524] -06/14/2026 18:18:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 23, island count 7 [PrintingService.cs@1569] -06/14/2026 18:18:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 24, start=0, count=232, Z=2.401 [PrintingService.cs@1518] -06/14/2026 18:18:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:18:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:18:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.75 with temperature 122.75 [HeaterCheck.cs@67] -06/14/2026 18:18:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.75 with temperature 122.75 [HeaterCheck.cs@67] -06/14/2026 18:18:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.75 with temperature 123 [HeaterCheck.cs@67] -06/14/2026 18:18:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 127.75 with temperature 122.75 [HeaterCheck.cs@67] -06/14/2026 18:18:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0139054. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2094088. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:18:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:18:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:18:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:18:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1202968 ~ 5.99 samples/sec, 5 resets, 4 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:18:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.5 [HeaterCheck.cs@67] -06/14/2026 18:18:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 127.75 with temperature 114.25 [HeaterCheck.cs@111] -06/14/2026 18:18:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 55 [HeaterCheck.cs@67] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.90293884277344, Elapsed=00:00:30.2061914 [ControlledHeating.cs@486] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.90293884277344 after 00:00:30.2064192 [ControlledHeating.cs@493] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2283298. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632646. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2941729. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3050363. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:18:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 192174591307 (192174591307 @ 0) for mcu = 1586.884876 [14/06/2026 15:21:19] (1601.4549275583333 sec) to 194587556623 (from now=194467556623, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 192174591307 (192174591307 @ 0) for mcu = 1586.884876 [14/06/2026 15:21:19] (1601.4549275583333 sec) to 194587556623 (from external timestamp, flags=None, requested=194587556623 (194587556623 @ 0) for mcu = 1606.993140 [14/06/2026 15:21:39] (1621.5629718583334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 192174591307 (192174591307 @ 0) for mcu = 1586.884876 [14/06/2026 15:21:19] (1601.4549275583333 sec) to 194587556623 (from external timestamp, flags=None, requested=194587556623 (194587556623 @ 0) for mcu = 1606.993140 [14/06/2026 15:21:39] (1621.5629718583334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:18:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 127.75 with temperature 122.78571319580078 [HeaterCheck.cs@67] -06/14/2026 18:18:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:18:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 127.75 with temperature 122.78571319580078 [HeaterCheck.cs@67] -06/14/2026 18:18:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.5 [HeaterCheck.cs@67] -06/14/2026 18:18:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262866, estimate=49.19544753302928 for layer 24, Z=2.401 [PrintingService.cs@1524] -06/14/2026 18:18:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 24, island count 7 [PrintingService.cs@1569] -06/14/2026 18:18:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 25, start=0, count=232, Z=2.501 [PrintingService.cs@1518] -06/14/2026 18:18:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:18:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:18:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.4277028. SinceCollect=00:01:00.8375356. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:18:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (129 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:18:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3177, gen1=573, gen2=47, LatencyMode=Interactive, FreeMemory=5760925696, Live=444055808, HeapSizeBytes=510467848, FragmentedBytes=66916704, TotalCommittedBytes=518406144, PinnedObjectsCount=27, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:18:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:18:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:18:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:18:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 127.75 with temperature 122.75 [HeaterCheck.cs@67] -06/14/2026 18:18:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:18:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:18:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:18:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 57.75 with temperature 45.75 [HeaterCheck.cs@111] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.03919982910156, Elapsed=00:00:30.6241534 [ControlledHeating.cs@486] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.03919982910156 after 00:00:30.6242143 [ControlledHeating.cs@493] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0125864. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633641. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0778345. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0912907. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:19:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 195799077851 (195799077851 @ 0) for mcu = 1617.089272 [14/06/2026 15:21:50] (1631.6589820916668 sec) to 198262491335 (from now=198142491335, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 195799077851 (195799077851 @ 0) for mcu = 1617.089272 [14/06/2026 15:21:50] (1631.6589820916668 sec) to 198262491335 (from external timestamp, flags=None, requested=198262491335 (198262491335 @ 0) for mcu = 1637.617944 [14/06/2026 15:22:10] (1652.1874277916668 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 195799077851 (195799077851 @ 0) for mcu = 1617.089272 [14/06/2026 15:21:50] (1631.6589820916668 sec) to 198262491335 (from external timestamp, flags=None, requested=198262491335 (198262491335 @ 0) for mcu = 1637.617944 [14/06/2026 15:22:10] (1652.1874277916668 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:19:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:09 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=157.663330078125 that are outside of set tolerance 10 for current step target 168 and final target 168 [ControlledHeating.cs@205] -06/14/2026 18:19:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 57.75 with temperature 48 [HeaterCheck.cs@111] -06/14/2026 18:19:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1073.2346047, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.781483210131979, Elapsed = 00:17:53.2546256, TimeTotal = 06:14:06.0607396, Remaining = 05:56:12.8061140, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:37.0004705, WeightTotalEstimate = 01:07:37.0004705, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:43.5407187, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:17:53.2546256, HeatingEstimate = 00:52:06.7653953, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:04.1021617, WeightEstimate = 01:07:37.0004705 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:26. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:19:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.781483210131979;StartedAtUtc;00:17:53.2546256;06:14:06.0607396;05:56:12.8061140;False;232;0;0;00:00:00;01:07:37.0004705;01:07:37.0004705;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:43.5407187;00:00:00;02:00:00;00:17:53.2546256;00:52:06.7653953;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:04.1021617 [PrintingService.cs@1918] -06/14/2026 18:19:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=128.75,printChamber1=128.75,printChamber2=128.75,printChamber3=128.75,printChamber4=128.75 [ControlledHeating.cs@169] -06/14/2026 18:19:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1983570. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:19:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:19:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:19:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0026337 ~ 5.97 samples/sec, 5 resets, 4 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:19:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.5 [HeaterCheck.cs@67] -06/14/2026 18:19:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=118.25 that are outside of set tolerance 10 for current step target 128.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:19:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:19:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1081.7345405, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.819351468093785, Elapsed = 00:18:01.7545576, TimeTotal = 06:14:06.0607358, Remaining = 05:56:04.3061782, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:37.0004705, WeightTotalEstimate = 01:07:37.0004705, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:43.5407187, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:01.7545576, HeatingEstimate = 00:51:58.2654595, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:04.1021617, WeightEstimate = 01:07:37.0004705 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:26. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:19:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.819351468093785;StartedAtUtc;00:18:01.7545576;06:14:06.0607358;05:56:04.3061782;False;232;0;0;00:00:00;01:07:37.0004705;01:07:37.0004705;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:43.5407187;00:00:00;02:00:00;00:18:01.7545576;00:51:58.2654595;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:04.1021617 [PrintingService.cs@1918] -06/14/2026 18:19:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=129.75,printChamber1=129.75,printChamber2=129.75,printChamber3=129.75,printChamber4=129.75 [ControlledHeating.cs@169] -06/14/2026 18:19:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 129.75 with temperature 124.25 [HeaterCheck.cs@88] -06/14/2026 18:19:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351763, estimate=49.323810358249645 for layer 25, Z=2.501 [PrintingService.cs@1524] -06/14/2026 18:19:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 25, island count 7 [PrintingService.cs@1569] -06/14/2026 18:19:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 26, start=0, count=232, Z=2.601 [PrintingService.cs@1518] -06/14/2026 18:19:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:19:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.75 with temperature 124.75 [HeaterCheck.cs@67] -06/14/2026 18:19:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1089.2365167, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.852452748903512, Elapsed = 00:18:09.2566798, TimeTotal = 06:14:07.5484083, Remaining = 05:55:58.2917285, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:38.4879970, WeightTotalEstimate = 01:07:38.4879970, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:45.0282452, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:09.2566798, HeatingEstimate = 00:51:50.7634833, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:05.5896882, WeightEstimate = 01:07:38.4879970 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:19:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.852452748903512;StartedAtUtc;00:18:09.2566798;06:14:07.5484083;05:55:58.2917285;False;232;0;0;00:00:00;01:07:38.4879970;01:07:38.4879970;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:45.0282452;00:00:00;02:00:00;00:18:09.2566798;00:51:50.7634833;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:05.5896882 [PrintingService.cs@1918] -06/14/2026 18:19:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=130.75,printChamber1=130.75,printChamber2=130.75,printChamber3=130.75,printChamber4=130.75 [ControlledHeating.cs@169] -06/14/2026 18:19:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.54638671875, Elapsed=00:00:30.2085999 [ControlledHeating.cs@486] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.54638671875 after 00:00:30.2086595 [ControlledHeating.cs@493] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2223512. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633952. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2900696. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3062456. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:19:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 199474012563 (199474012563 @ 0) for mcu = 1647.714179 [14/06/2026 15:22:20] (1662.283438025 sec) to 201888232200 (from now=201768232200, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 199474012563 (199474012563 @ 0) for mcu = 1647.714179 [14/06/2026 15:22:20] (1662.283438025 sec) to 201888232200 (from external timestamp, flags=None, requested=201888232200 (201888232200 @ 0) for mcu = 1667.832939 [14/06/2026 15:22:40] (1682.401935 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 199474012563 (199474012563 @ 0) for mcu = 1647.714179 [14/06/2026 15:22:20] (1662.283438025 sec) to 201888232200 (from external timestamp, flags=None, requested=201888232200 (201888232200 @ 0) for mcu = 1667.832939 [14/06/2026 15:22:40] (1682.401935 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:19:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:19:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 130.75 with temperature 125.75 [HeaterCheck.cs@67] -06/14/2026 18:19:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1096.7349193, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.88585624484253, Elapsed = 00:18:16.7549387, TimeTotal = 06:14:07.5482646, Remaining = 05:55:50.7933259, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:38.4879970, WeightTotalEstimate = 01:07:38.4879970, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:45.0282452, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:16.7549387, HeatingEstimate = 00:51:43.2650807, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:05.5896882, WeightEstimate = 01:07:38.4879970 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:19:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.88585624484253;StartedAtUtc;00:18:16.7549387;06:14:07.5482646;05:55:50.7933259;False;232;0;0;00:00:00;01:07:38.4879970;01:07:38.4879970;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:45.0282452;00:00:00;02:00:00;00:18:16.7549387;00:51:43.2650807;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:05.5896882 [PrintingService.cs@1918] -06/14/2026 18:19:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=131.75,printChamber1=131.75,printChamber2=131.75,printChamber3=131.75,printChamber4=131.75 [ControlledHeating.cs@169] -06/14/2026 18:19:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:19:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.25 [HeaterCheck.cs@67] -06/14/2026 18:19:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.5 [HeaterCheck.cs@67] -06/14/2026 18:19:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (234 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:19:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:19:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2967851. SinceCollect=00:01:00.7104854. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:19:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3297, gen1=579, gen2=48, LatencyMode=Interactive, FreeMemory=5881380864, Live=442582656, HeapSizeBytes=509588112, FragmentedBytes=67316016, TotalCommittedBytes=518406144, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:19:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:19:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:19:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1104.2351633, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.91926854368165, Elapsed = 00:18:24.2551805, TimeTotal = 06:14:07.5482624, Remaining = 05:55:43.2930819, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:38.4879970, WeightTotalEstimate = 01:07:38.4879970, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:45.0282452, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:24.2551805, HeatingEstimate = 00:51:35.7648367, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:05.5896882, WeightEstimate = 01:07:38.4879970 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:19:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.91926854368165;StartedAtUtc;00:18:24.2551805;06:14:07.5482624;05:55:43.2930819;False;232;0;0;00:00:00;01:07:38.4879970;01:07:38.4879970;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:45.0282452;00:00:00;02:00:00;00:18:24.2551805;00:51:35.7648367;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:05.5896882 [PrintingService.cs@1918] -06/14/2026 18:19:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=132.75,printChamber1=132.75,printChamber2=132.75,printChamber3=132.75,printChamber4=132.75 [ControlledHeating.cs@169] -06/14/2026 18:19:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:19:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1111.736456, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 4.9526855282798525, Elapsed = 00:18:31.7564743, TimeTotal = 06:14:07.5482635, Remaining = 05:55:35.7917892, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:38.4879970, WeightTotalEstimate = 01:07:38.4879970, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:45.0282452, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:31.7564743, HeatingEstimate = 00:51:28.2635440, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:05.5896882, WeightEstimate = 01:07:38.4879970 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:19:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.9526855282798525;StartedAtUtc;00:18:31.7564743;06:14:07.5482635;05:55:35.7917892;False;232;0;0;00:00:00;01:07:38.4879970;01:07:38.4879970;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:45.0282452;00:00:00;02:00:00;00:18:31.7564743;00:51:28.2635440;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:05.5896882 [PrintingService.cs@1918] -06/14/2026 18:19:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=133.75,printChamber1=133.75,printChamber2=133.75,printChamber3=133.75,printChamber4=133.75 [ControlledHeating.cs@169] -06/14/2026 18:19:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 52.75 [HeaterCheck.cs@67] -06/14/2026 18:19:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.25 [HeaterCheck.cs@67] -06/14/2026 18:19:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53 [HeaterCheck.cs@67] -06/14/2026 18:19:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=122.75,printChamber4=122.5 that are outside of set tolerance 10 for current step target 133.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.81893920898438, Elapsed=00:00:30.5161471 [ControlledHeating.cs@486] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.81893920898438 after 00:00:30.5182453 [ControlledHeating.cs@493] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0291596. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629585. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0954503. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1081897. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:20:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 203099753428 (203099753428 @ 0) for mcu = 1677.929098 [14/06/2026 15:22:50] (1692.4979452333334 sec) to 205549655067 (from now=205429655067, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 203099753428 (203099753428 @ 0) for mcu = 1677.929098 [14/06/2026 15:22:50] (1692.4979452333334 sec) to 205549655067 (from external timestamp, flags=None, requested=205549655067 (205549655067 @ 0) for mcu = 1698.345216 [14/06/2026 15:23:11] (1712.913792225 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 203099753428 (203099753428 @ 0) for mcu = 1677.929098 [14/06/2026 15:22:50] (1692.4979452333334 sec) to 205549655067 (from external timestamp, flags=None, requested=205549655067 (205549655067 @ 0) for mcu = 1698.345216 [14/06/2026 15:23:11] (1712.913792225 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.75 with temperature 53.5 [HeaterCheck.cs@67] -06/14/2026 18:20:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262875, estimate=49.65087942277468 for layer 26, Z=2.601 [PrintingService.cs@1524] -06/14/2026 18:20:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 26, island count 7 [PrintingService.cs@1569] -06/14/2026 18:20:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 27, start=0, count=232, Z=2.701 [PrintingService.cs@1518] -06/14/2026 18:20:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:20:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 57.75 with temperature 46.25 [HeaterCheck.cs@111] -06/14/2026 18:20:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0458988 ~ 5.98 samples/sec, 5 resets, 4 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2175578. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:20:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:20:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:20:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 57.75 with temperature 49.5 [HeaterCheck.cs@111] -06/14/2026 18:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1139.2359794, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.06825007689977, Elapsed = 00:18:59.2560259, TimeTotal = 06:14:38.2914934, Remaining = 05:55:39.0354675, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:09.2311987, WeightTotalEstimate = 01:08:09.2311987, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:15.7714469, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:59.2560259, HeatingEstimate = 00:51:00.7640206, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:36.3328899, WeightEstimate = 01:08:09.2311987 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.06825007689977;StartedAtUtc;00:18:59.2560259;06:14:38.2914934;05:55:39.0354675;False;232;0;0;00:00:00;01:08:09.2311987;01:08:09.2311987;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:15.7714469;00:00:00;02:00:00;00:18:59.2560259;00:51:00.7640206;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:36.3328899 [PrintingService.cs@1918] -06/14/2026 18:20:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=134.75,printChamber1=134.75,printChamber2=134.75,printChamber3=134.75,printChamber4=134.75 [ControlledHeating.cs@169] -06/14/2026 18:20:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=58.75,powderChamber1=58.75,powderChamber2=58.75,powderChamber3=58.75,powderChamber4=58.75 [ControlledHeating.cs@169] -06/14/2026 18:20:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54 [HeaterCheck.cs@67] -06/14/2026 18:20:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=123.89286041259766,printChamber4=123.75 that are outside of set tolerance 10 for current step target 134.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:20:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1147.7360544, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.106064555868377, Elapsed = 00:19:07.7560733, TimeTotal = 06:14:38.2914658, Remaining = 05:55:30.5353925, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:09.2311987, WeightTotalEstimate = 01:08:09.2311987, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:15.7714469, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:07.7560733, HeatingEstimate = 00:50:52.2639456, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:36.3328899, WeightEstimate = 01:08:09.2311987 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:20:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.106064555868377;StartedAtUtc;00:19:07.7560733;06:14:38.2914658;05:55:30.5353925;False;232;0;0;00:00:00;01:08:09.2311987;01:08:09.2311987;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:15.7714469;00:00:00;02:00:00;00:19:07.7560733;00:50:52.2639456;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:36.3328899 [PrintingService.cs@1918] -06/14/2026 18:20:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=135.75,printChamber1=135.75,printChamber2=135.75,printChamber3=135.75,printChamber4=135.75 [ControlledHeating.cs@169] -06/14/2026 18:20:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:31 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=48 that are outside of set tolerance 10 for current step target 58.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:20:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54 [HeaterCheck.cs@67] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.3119354248047, Elapsed=00:00:30.2043397 [ControlledHeating.cs@486] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.3119354248047 after 00:00:30.2055206 [ControlledHeating.cs@493] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2382297. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632914. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3035316. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3202410. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:20:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 206761176295 (206761176295 @ 0) for mcu = 1708.441435 [14/06/2026 15:23:21] (1723.0098024583333 sec) to 209175040706 (from now=209055040706, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 206761176295 (206761176295 @ 0) for mcu = 1708.441435 [14/06/2026 15:23:21] (1723.0098024583333 sec) to 209175040706 (from external timestamp, flags=None, requested=209175040706 (209175040706 @ 0) for mcu = 1728.557270 [14/06/2026 15:23:41] (1743.1253392166666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 206761176295 (206761176295 @ 0) for mcu = 1708.441435 [14/06/2026 15:23:21] (1723.0098024583333 sec) to 209175040706 (from external timestamp, flags=None, requested=209175040706 (209175040706 @ 0) for mcu = 1728.557270 [14/06/2026 15:23:41] (1743.1253392166666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:20:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:20:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:35 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=124.75 that are outside of set tolerance 10 for current step target 135.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:20:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 135.75 with temperature 130.82142639160156 [HeaterCheck.cs@67] -06/14/2026 18:20:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1159.2393196, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.1572395542544625, Elapsed = 00:19:19.2593386, TimeTotal = 06:14:38.2914659, Remaining = 05:55:19.0321273, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:09.2311987, WeightTotalEstimate = 01:08:09.2311987, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:15.7714469, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:19.2593386, HeatingEstimate = 00:50:40.7606804, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:36.3328899, WeightEstimate = 01:08:09.2311987 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:20:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.1572395542544625;StartedAtUtc;00:19:19.2593386;06:14:38.2914659;05:55:19.0321273;False;232;0;0;00:00:00;01:08:09.2311987;01:08:09.2311987;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:15.7714469;00:00:00;02:00:00;00:19:19.2593386;00:50:40.7606804;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:36.3328899 [PrintingService.cs@1918] -06/14/2026 18:20:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=136.75,printChamber1=136.75,printChamber2=136.75,printChamber3=136.75,printChamber4=136.75 [ControlledHeating.cs@169] -06/14/2026 18:20:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 136.75 with temperature 131.2142791748047 [HeaterCheck.cs@88] -06/14/2026 18:20:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 136.75 with temperature 131.75 [HeaterCheck.cs@67] -06/14/2026 18:20:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54 [HeaterCheck.cs@67] -06/14/2026 18:20:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 136.75 with temperature 131.82142639160156 [HeaterCheck.cs@67] -06/14/2026 18:20:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54 [HeaterCheck.cs@67] -06/14/2026 18:20:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (707 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:20:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9999399. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:20:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 136.75 with temperature 126.25 [HeaterCheck.cs@111] -06/14/2026 18:20:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9999399. Loops = 44. GC duration = 00:00:00.2877124. SinceCollect=00:01:00.7160260. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:20:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3425, gen1=639, gen2=49, LatencyMode=Interactive, FreeMemory=5876908032, Live=442604056, HeapSizeBytes=509651312, FragmentedBytes=67273176, TotalCommittedBytes=519946240, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:20:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:20:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:20:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54 [HeaterCheck.cs@67] -06/14/2026 18:20:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=126.5 that are outside of set tolerance 10 for current step target 136.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:20:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351771, estimate=49.277490908949005 for layer 27, Z=2.701 [PrintingService.cs@1524] -06/14/2026 18:20:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 27, island count 7 [PrintingService.cs@1569] -06/14/2026 18:20:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 28, start=0, count=232, Z=2.8009999 [PrintingService.cs@1518] -06/14/2026 18:20:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:20:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1171.7454793, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.212521221018191, Elapsed = 00:19:31.7655282, TimeTotal = 06:14:39.8226907, Remaining = 05:55:08.0571625, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:10.7623936, WeightTotalEstimate = 01:08:10.7623936, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:17.3026418, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:31.7655282, HeatingEstimate = 00:50:28.2545207, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:37.8640848, WeightEstimate = 01:08:10.7623936 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:20:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.212521221018191;StartedAtUtc;00:19:31.7655282;06:14:39.8226907;05:55:08.0571625;False;232;0;0;00:00:00;01:08:10.7623936;01:08:10.7623936;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:17.3026418;00:00:00;02:00:00;00:19:31.7655282;00:50:28.2545207;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:37.8640848 [PrintingService.cs@1918] -06/14/2026 18:20:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=137.75,printChamber1=137.75,printChamber2=137.75,printChamber3=137.75,printChamber4=137.75 [ControlledHeating.cs@169] -06/14/2026 18:20:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 137.75 with temperature 131.75 [HeaterCheck.cs@88] -06/14/2026 18:20:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:20:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 137.75 with temperature 133 [HeaterCheck.cs@67] -06/14/2026 18:20:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=126.75 that are outside of set tolerance 10 for current step target 137.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:20:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.25 [HeaterCheck.cs@67] -06/14/2026 18:21:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.5 [HeaterCheck.cs@67] -06/14/2026 18:21:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1180.2507513, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.250356635371949, Elapsed = 00:19:40.2708657, TimeTotal = 06:14:39.8227562, Remaining = 05:54:59.5518905, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:10.7623936, WeightTotalEstimate = 01:08:10.7623936, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:17.3026418, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:40.2708657, HeatingEstimate = 00:50:19.7492487, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:37.8640848, WeightEstimate = 01:08:10.7623936 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:21:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.250356635371949;StartedAtUtc;00:19:40.2708657;06:14:39.8227562;05:54:59.5518905;False;232;0;0;00:00:00;01:08:10.7623936;01:08:10.7623936;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:17.3026418;00:00:00;02:00:00;00:19:40.2708657;00:50:19.7492487;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:37.8640848 [PrintingService.cs@1918] -06/14/2026 18:21:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=138.75,printChamber1=138.75,printChamber2=138.75,printChamber3=138.75,printChamber4=138.75 [ControlledHeating.cs@169] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.17529296875, Elapsed=00:00:30.4985573 [ControlledHeating.cs@486] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.17529296875 after 00:00:30.4986150 [ControlledHeating.cs@493] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0193695. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630004. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0908778. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1044052. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:21:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 210386561934 (210386561934 @ 0) for mcu = 1738.653442 [14/06/2026 15:23:51] (1753.22134945 sec) to 212835015787 (from now=212715015787, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 210386561934 (210386561934 @ 0) for mcu = 1738.653442 [14/06/2026 15:23:51] (1753.22134945 sec) to 212835015787 (from external timestamp, flags=None, requested=212835015787 (212835015787 @ 0) for mcu = 1759.057534 [14/06/2026 15:24:12] (1773.6251315583334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 210386561934 (210386561934 @ 0) for mcu = 1738.653442 [14/06/2026 15:23:51] (1753.22134945 sec) to 212835015787 (from external timestamp, flags=None, requested=212835015787 (212835015787 @ 0) for mcu = 1759.057534 [14/06/2026 15:24:12] (1773.6251315583334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:21:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54 [HeaterCheck.cs@67] -06/14/2026 18:21:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54 [HeaterCheck.cs@67] -06/14/2026 18:21:07 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=127.75 that are outside of set tolerance 10 for current step target 138.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:21:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 53.75 [HeaterCheck.cs@67] -06/14/2026 18:21:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1188.7607097, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.288212233067034, Elapsed = 00:19:48.7807321, TimeTotal = 06:14:39.8226642, Remaining = 05:54:51.0419321, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:10.7623936, WeightTotalEstimate = 01:08:10.7623936, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:17.3026418, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:48.7807321, HeatingEstimate = 00:50:11.2392903, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:37.8640848, WeightEstimate = 01:08:10.7623936 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:15:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:21:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.288212233067034;StartedAtUtc;00:19:48.7807321;06:14:39.8226642;05:54:51.0419321;False;232;0;0;00:00:00;01:08:10.7623936;01:08:10.7623936;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:17.3026418;00:00:00;02:00:00;00:19:48.7807321;00:50:11.2392903;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:37.8640848 [PrintingService.cs@1918] -06/14/2026 18:21:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=139.75,printChamber1=139.75,printChamber2=139.75,printChamber3=139.75,printChamber4=139.75 [ControlledHeating.cs@169] -06/14/2026 18:21:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58.75 with temperature 46.25 [HeaterCheck.cs@111] -06/14/2026 18:21:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.25 [HeaterCheck.cs@67] -06/14/2026 18:21:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0853212 ~ 5.99 samples/sec, 5 resets, 7 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:21:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2046449. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:21:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:21:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:21:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=129.25 that are outside of set tolerance 10 for current step target 139.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:21:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58.75 with temperature 50.75 [HeaterCheck.cs@111] -06/14/2026 18:21:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.25 [HeaterCheck.cs@67] -06/14/2026 18:21:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:21:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262845, estimate=49.26264739921234 for layer 28, Z=2.8009999 [PrintingService.cs@1524] -06/14/2026 18:21:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 28, island count 7 [PrintingService.cs@1569] -06/14/2026 18:21:28 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 29, start=0, count=232, Z=2.901 [PrintingService.cs@1518] -06/14/2026 18:21:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:21:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 139.75 with temperature 134.75 [HeaterCheck.cs@67] -06/14/2026 18:21:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 139.75 with temperature 134.75 [HeaterCheck.cs@67] -06/14/2026 18:21:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 139.75 with temperature 135 [HeaterCheck.cs@67] -06/14/2026 18:21:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.42733764648438, Elapsed=00:00:30.2130177 [ControlledHeating.cs@486] -06/14/2026 18:21:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.42733764648438 after 00:00:30.2130768 [ControlledHeating.cs@493] -06/14/2026 18:21:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2290964. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:21:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632031. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2927968. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3040032. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:21:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 214046537015 (214046537015 @ 0) for mcu = 1769.153729 [14/06/2026 15:24:22] (1783.7211417916667 sec) to 216458925170 (from now=216338925170, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 214046537015 (214046537015 @ 0) for mcu = 1769.153729 [14/06/2026 15:24:22] (1783.7211417916667 sec) to 216458925170 (from external timestamp, flags=None, requested=216458925170 (216458925170 @ 0) for mcu = 1789.257275 [14/06/2026 15:24:42] (1803.8243764166666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 214046537015 (214046537015 @ 0) for mcu = 1769.153729 [14/06/2026 15:24:22] (1783.7211417916667 sec) to 216458925170 (from external timestamp, flags=None, requested=216458925170 (216458925170 @ 0) for mcu = 1789.257275 [14/06/2026 15:24:42] (1803.8243764166666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:21:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:21:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:21:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:21:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.4195848. SinceCollect=00:01:00.8212129. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:21:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3554, gen1=689, gen2=50, LatencyMode=Interactive, FreeMemory=5871108096, Live=442611000, HeapSizeBytes=509538936, FragmentedBytes=67268920, TotalCommittedBytes=518897664, PinnedObjectsCount=25, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:21:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:21:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:21:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (267 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:21:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 139.75 with temperature 135 [HeaterCheck.cs@67] -06/14/2026 18:21:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 139.75 with temperature 135.25 [HeaterCheck.cs@67] -06/14/2026 18:21:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.25 [HeaterCheck.cs@67] -06/14/2026 18:21:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 139.75 with temperature 134.75 [HeaterCheck.cs@67] -06/14/2026 18:21:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 139.75 with temperature 134.75 [HeaterCheck.cs@67] -06/14/2026 18:21:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 139.75 with temperature 135 [HeaterCheck.cs@67] -06/14/2026 18:21:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 139.75 with temperature 135.25 [HeaterCheck.cs@67] -06/14/2026 18:22:00 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/14/2026 18:22:01 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/14/2026 18:22:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/14/2026 18:22:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/14/2026 18:22:01 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/14/2026 18:22:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.25128173828125, Elapsed=00:00:30.6053255 [ControlledHeating.cs@486] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.25128173828125 after 00:00:30.6053805 [ControlledHeating.cs@493] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0114443. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629358. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0761264. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0872473. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:22:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 217670446398 (217670446398 @ 0) for mcu = 1799.353448 [14/06/2026 15:24:52] (1813.92038665 sec) to 220131435569 (from now=220011435569, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 217670446398 (217670446398 @ 0) for mcu = 1799.353448 [14/06/2026 15:24:52] (1813.92038665 sec) to 220131435569 (from external timestamp, flags=None, requested=220131435569 (220131435569 @ 0) for mcu = 1819.862008 [14/06/2026 15:25:12] (1834.4286297416666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 217670446398 (217670446398 @ 0) for mcu = 1799.353448 [14/06/2026 15:24:52] (1813.92038665 sec) to 220131435569 (from external timestamp, flags=None, requested=220131435569 (220131435569 @ 0) for mcu = 1819.862008 [14/06/2026 15:25:12] (1834.4286297416666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:22:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351796, estimate=49.45533371821101 for layer 29, Z=2.901 [PrintingService.cs@1524] -06/14/2026 18:22:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 29, island count 7 [PrintingService.cs@1569] -06/14/2026 18:22:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 30, start=0, count=232, Z=3.001 [PrintingService.cs@1518] -06/14/2026 18:22:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:22:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0852227 ~ 5.97 samples/sec, 5 resets, 7 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:22:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1883615. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:22:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:22:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:22:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 139.75 with temperature 134.85714721679688 [HeaterCheck.cs@67] -06/14/2026 18:22:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.75 with temperature 54.25 [HeaterCheck.cs@67] -06/14/2026 18:22:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1270.5077812, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.642691694788772, Elapsed = 00:21:10.5278655, TimeTotal = 06:15:16.3438696, Remaining = 05:54:05.8160041, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:47.2835371, WeightTotalEstimate = 01:08:47.2835371, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:53.8237853, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:10.5278655, HeatingEstimate = 00:48:49.4922188, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:14.3852283, WeightEstimate = 01:08:47.2835371 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:16:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:22:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.642691694788772;StartedAtUtc;00:21:10.5278655;06:15:16.3438696;05:54:05.8160041;False;232;0;0;00:00:00;01:08:47.2835371;01:08:47.2835371;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:53.8237853;00:00:00;02:00:00;00:21:10.5278655;00:48:49.4922188;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:14.3852283 [PrintingService.cs@1918] -06/14/2026 18:22:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=140.75,printChamber1=140.75,printChamber2=140.75,printChamber3=140.75,printChamber4=140.75 [ControlledHeating.cs@169] -06/14/2026 18:22:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 140.75 with temperature 134.25 [HeaterCheck.cs@88] -06/14/2026 18:22:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 140.75 with temperature 136 [HeaterCheck.cs@67] -06/14/2026 18:22:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58.75 with temperature 48 [HeaterCheck.cs@111] -06/14/2026 18:22:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 140.75 with temperature 135.75 [HeaterCheck.cs@67] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.09083557128906, Elapsed=00:00:30.1947408 [ControlledHeating.cs@486] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.09083557128906 after 00:00:30.1948637 [ControlledHeating.cs@493] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2069369. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631191. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2709937. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2834482. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:22:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 221342956797 (221342956797 @ 0) for mcu = 1829.958186 [14/06/2026 15:25:22] (1844.524639975 sec) to 223754912502 (from now=223634912502, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 221342956797 (221342956797 @ 0) for mcu = 1829.958186 [14/06/2026 15:25:22] (1844.524639975 sec) to 223754912502 (from external timestamp, flags=None, requested=223754912502 (223754912502 @ 0) for mcu = 1850.058129 [14/06/2026 15:25:43] (1864.62427085 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 221342956797 (221342956797 @ 0) for mcu = 1829.958186 [14/06/2026 15:25:22] (1844.524639975 sec) to 223754912502 (from external timestamp, flags=None, requested=223754912502 (223754912502 @ 0) for mcu = 1850.058129 [14/06/2026 15:25:43] (1864.62427085 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:22:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=59.75,powderChamber1=59.75,powderChamber2=59.75,powderChamber3=59.75,powderChamber4=59.75 [ControlledHeating.cs@169] -06/14/2026 18:22:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 59.75 with temperature 54 [HeaterCheck.cs@88] -06/14/2026 18:22:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:22:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 55 [HeaterCheck.cs@67] -06/14/2026 18:22:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 140.75 with temperature 136.5 [HeaterCheck.cs@67] -06/14/2026 18:22:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:22:38 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=129.75 that are outside of set tolerance 10 for current step target 140.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:22:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 140.75 with temperature 135.75 [HeaterCheck.cs@67] -06/14/2026 18:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1279.007415, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.680440173216212, Elapsed = 00:21:19.0274393, TimeTotal = 06:15:16.3438096, Remaining = 05:53:57.3163703, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:47.2835371, WeightTotalEstimate = 01:08:47.2835371, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:53.8237853, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:19.0274393, HeatingEstimate = 00:48:40.9925850, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:14.3852283, WeightEstimate = 01:08:47.2835371 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:16:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.680440173216212;StartedAtUtc;00:21:19.0274393;06:15:16.3438096;05:53:57.3163703;False;232;0;0;00:00:00;01:08:47.2835371;01:08:47.2835371;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:53.8237853;00:00:00;02:00:00;00:21:19.0274393;00:48:40.9925850;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:14.3852283 [PrintingService.cs@1918] -06/14/2026 18:22:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=141.75,printChamber1=141.75,printChamber2=141.75,printChamber3=141.75,printChamber4=141.75 [ControlledHeating.cs@169] -06/14/2026 18:22:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=48.75 that are outside of set tolerance 10 for current step target 59.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:22:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (470 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 141.75 with temperature 137 [HeaterCheck.cs@67] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.3081262. SinceCollect=00:01:00.6961141. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3677, gen1=791, gen2=51, LatencyMode=Interactive, FreeMemory=5867716608, Live=443012160, HeapSizeBytes=509386440, FragmentedBytes=66771360, TotalCommittedBytes=518389760, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:22:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:22:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1286.5095664, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.713758847486085, Elapsed = 00:21:26.5295863, TimeTotal = 06:15:16.3438052, Remaining = 05:53:49.8142189, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:47.2835371, WeightTotalEstimate = 01:08:47.2835371, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:53.8237853, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:26.5295863, HeatingEstimate = 00:48:33.4904336, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:14.3852283, WeightEstimate = 01:08:47.2835371 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:16:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.713758847486085;StartedAtUtc;00:21:26.5295863;06:15:16.3438052;05:53:49.8142189;False;232;0;0;00:00:00;01:08:47.2835371;01:08:47.2835371;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:53.8237853;00:00:00;02:00:00;00:21:26.5295863;00:48:33.4904336;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:14.3852283 [PrintingService.cs@1918] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=142.75,printChamber1=142.75,printChamber2=142.75,printChamber3=142.75,printChamber4=142.75 [ControlledHeating.cs@169] -06/14/2026 18:22:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 142.75 with temperature 136.5 [HeaterCheck.cs@88] -06/14/2026 18:22:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262847, estimate=49.27559493147031 for layer 30, Z=3.001 [PrintingService.cs@1524] -06/14/2026 18:22:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:22:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 30, island count 7 [PrintingService.cs@1569] -06/14/2026 18:22:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 31, start=0, count=232, Z=3.101 [PrintingService.cs@1518] -06/14/2026 18:22:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:22:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 54.75 [HeaterCheck.cs@67] -06/14/2026 18:22:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 142.75 with temperature 137.75 [HeaterCheck.cs@67] -06/14/2026 18:22:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 142.75 with temperature 137.75 [HeaterCheck.cs@67] -06/14/2026 18:22:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 55.25 [HeaterCheck.cs@67] -06/14/2026 18:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1294.0084039, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.740404616046755, Elapsed = 00:21:34.0285019, TimeTotal = 06:15:42.4615241, Remaining = 05:54:08.4330222, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:13.4011779, WeightTotalEstimate = 01:09:13.4011779, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:19.9414261, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:34.0285019, HeatingEstimate = 00:48:25.9915961, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:40.5028691, WeightEstimate = 01:09:13.4011779 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:02. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.740404616046755;StartedAtUtc;00:21:34.0285019;06:15:42.4615241;05:54:08.4330222;False;232;0;0;00:00:00;01:09:13.4011779;01:09:13.4011779;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:19.9414261;00:00:00;02:00:00;00:21:34.0285019;00:48:25.9915961;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:40.5028691 [PrintingService.cs@1918] -06/14/2026 18:22:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=143.75,printChamber1=143.75,printChamber2=143.75,printChamber3=143.75,printChamber4=143.75 [ControlledHeating.cs@169] -06/14/2026 18:22:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 143.75 with temperature 138.5 [HeaterCheck.cs@88] -06/14/2026 18:22:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 143.75 with temperature 138.75 [HeaterCheck.cs@67] -06/14/2026 18:22:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 143.75 with temperature 138.75 [HeaterCheck.cs@67] -06/14/2026 18:22:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 143.75 with temperature 138.75 [HeaterCheck.cs@67] -06/14/2026 18:23:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 143.75 with temperature 138.75 [HeaterCheck.cs@67] -06/14/2026 18:23:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 55 [HeaterCheck.cs@67] -06/14/2026 18:23:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 143.75 with temperature 138.75 [HeaterCheck.cs@67] -06/14/2026 18:23:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1301.5082722, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.773674244536973, Elapsed = 00:21:41.5282905, TimeTotal = 06:15:42.4614444, Remaining = 05:54:00.9331539, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:13.4011779, WeightTotalEstimate = 01:09:13.4011779, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:19.9414261, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:41.5282905, HeatingEstimate = 00:48:18.4917278, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:40.5028691, WeightEstimate = 01:09:13.4011779 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:02. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:23:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.773674244536973;StartedAtUtc;00:21:41.5282905;06:15:42.4614444;05:54:00.9331539;False;232;0;0;00:00:00;01:09:13.4011779;01:09:13.4011779;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:19.9414261;00:00:00;02:00:00;00:21:41.5282905;00:48:18.4917278;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:40.5028691 [PrintingService.cs@1918] -06/14/2026 18:23:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=144.75,printChamber1=144.75,printChamber2=144.75,printChamber3=144.75,printChamber4=144.75 [ControlledHeating.cs@169] -06/14/2026 18:23:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 144.75 with temperature 139.25 [HeaterCheck.cs@88] -06/14/2026 18:23:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.75 with temperature 139.75 [HeaterCheck.cs@67] -06/14/2026 18:23:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 144.75 with temperature 139.75 [HeaterCheck.cs@67] -06/14/2026 18:23:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.75 with temperature 55.5 [HeaterCheck.cs@67] -06/14/2026 18:23:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.75 with temperature 141 [HeaterCheck.cs@67] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.30392456054688, Elapsed=00:00:30.5038060 [ControlledHeating.cs@486] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.30392456054688 after 00:00:30.5039021 [ControlledHeating.cs@493] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0134385. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634399. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0799482. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0922022. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:23:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 224966433730 (224966433730 @ 0) for mcu = 1860.154355 [14/06/2026 15:25:53] (1874.7202810833332 sec) to 227415477719 (from now=227295477719, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 224966433730 (224966433730 @ 0) for mcu = 1860.154355 [14/06/2026 15:25:53] (1874.7202810833332 sec) to 227415477719 (from external timestamp, flags=None, requested=227415477719 (227415477719 @ 0) for mcu = 1880.563394 [14/06/2026 15:26:13] (1895.1289809916666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 224966433730 (224966433730 @ 0) for mcu = 1860.154355 [14/06/2026 15:25:53] (1874.7202810833332 sec) to 227415477719 (from external timestamp, flags=None, requested=227415477719 (227415477719 @ 0) for mcu = 1880.563394 [14/06/2026 15:26:13] (1895.1289809916666 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:23:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1309.0072874, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.806940757822204, Elapsed = 00:21:49.0273861, TimeTotal = 06:15:42.4615248, Remaining = 05:53:53.4341387, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:13.4011779, WeightTotalEstimate = 01:09:13.4011779, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:19.9414261, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:49.0273861, HeatingEstimate = 00:48:10.9927126, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:40.5028691, WeightEstimate = 01:09:13.4011779 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:02. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.806940757822204;StartedAtUtc;00:21:49.0273861;06:15:42.4615248;05:53:53.4341387;False;232;0;0;00:00:00;01:09:13.4011779;01:09:13.4011779;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:19.9414261;00:00:00;02:00:00;00:21:49.0273861;00:48:10.9927126;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:40.5028691 [PrintingService.cs@1918] -06/14/2026 18:23:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=145.75,printChamber1=145.75,printChamber2=145.75,printChamber3=145.75,printChamber4=145.75 [ControlledHeating.cs@169] -06/14/2026 18:23:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 145.75 with temperature 142 [HeaterCheck.cs@67] -06/14/2026 18:23:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0802874 ~ 5.99 samples/sec, 5 resets, 7 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:23:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9899588. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1982199. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:23:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:23:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:23:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=133.5 that are outside of set tolerance 10 for current step target 145.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:23:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351813, estimate=49.32778745312497 for layer 31, Z=3.101 [PrintingService.cs@1524] -06/14/2026 18:23:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 31, island count 7 [PrintingService.cs@1569] -06/14/2026 18:23:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 32, start=0, count=232, Z=3.201 [PrintingService.cs@1518] -06/14/2026 18:23:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 88, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:23:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 59.75 with temperature 47.75 [HeaterCheck.cs@111] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.95587158203125, Elapsed=00:00:30.2029474 [ControlledHeating.cs@486] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.95587158203125 after 00:00:30.2030443 [ControlledHeating.cs@493] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2180984. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631235. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2858226. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3054744. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:23:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 228626998947 (228626998947 @ 0) for mcu = 1890.659649 [14/06/2026 15:26:23] (1905.224991225 sec) to 231041028069 (from now=230921028069, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 228626998947 (228626998947 @ 0) for mcu = 1890.659649 [14/06/2026 15:26:23] (1905.224991225 sec) to 231041028069 (from external timestamp, flags=None, requested=231041028069 (231041028069 @ 0) for mcu = 1910.776917 [14/06/2026 15:26:43] (1925.341900575 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 228626998947 (228626998947 @ 0) for mcu = 1890.659649 [14/06/2026 15:26:23] (1905.224991225 sec) to 231041028069 (from external timestamp, flags=None, requested=231041028069 (231041028069 @ 0) for mcu = 1910.776917 [14/06/2026 15:26:43] (1925.341900575 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:23:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:23:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1337.5328675, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.933072001055187, Elapsed = 00:22:17.5528859, TimeTotal = 06:15:44.0191129, Remaining = 05:53:26.4662270, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:14.9588463, WeightTotalEstimate = 01:09:14.9588463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:21.4990945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:17.5528859, HeatingEstimate = 00:47:42.4671325, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.0605375, WeightEstimate = 01:09:14.9588463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:23:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.933072001055187;StartedAtUtc;00:22:17.5528859;06:15:44.0191129;05:53:26.4662270;False;232;0;0;00:00:00;01:09:14.9588463;01:09:14.9588463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:21.4990945;00:00:00;02:00:00;00:22:17.5528859;00:47:42.4671325;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.0605375 [PrintingService.cs@1918] -06/14/2026 18:23:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=146.75,printChamber1=146.75,printChamber2=146.75,printChamber3=146.75,printChamber4=146.75 [ControlledHeating.cs@169] -06/14/2026 18:23:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 59.75 with temperature 52.5 [HeaterCheck.cs@111] -06/14/2026 18:23:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=60.75,powderChamber1=60.75,powderChamber2=60.75,powderChamber3=60.75,powderChamber4=60.75 [ControlledHeating.cs@169] -06/14/2026 18:23:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 60.75 with temperature 55.25 [HeaterCheck.cs@88] -06/14/2026 18:23:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.75 with temperature 55.75 [HeaterCheck.cs@67] -06/14/2026 18:23:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.75 with temperature 55.75 [HeaterCheck.cs@67] -06/14/2026 18:23:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.75 with temperature 55.75 [HeaterCheck.cs@67] -06/14/2026 18:23:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=135.75 that are outside of set tolerance 10 for current step target 146.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:23:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 146.75 with temperature 141.82142639160156 [HeaterCheck.cs@67] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1346.0306035, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 5.970766276413915, Elapsed = 00:22:26.0506949, TimeTotal = 06:15:44.0191859, Remaining = 05:53:17.9684910, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:14.9588463, WeightTotalEstimate = 01:09:14.9588463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:21.4990945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:26.0506949, HeatingEstimate = 00:47:33.9693965, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.0605375, WeightEstimate = 01:09:14.9588463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.970766276413915;StartedAtUtc;00:22:26.0506949;06:15:44.0191859;05:53:17.9684910;False;232;0;0;00:00:00;01:09:14.9588463;01:09:14.9588463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:21.4990945;00:00:00;02:00:00;00:22:26.0506949;00:47:33.9693965;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.0605375 [PrintingService.cs@1918] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=147.75,printChamber1=147.75,printChamber2=147.75,printChamber3=147.75,printChamber4=147.75 [ControlledHeating.cs@169] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.75 with temperature 55.75 [HeaterCheck.cs@67] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 147.75 with temperature 142.32142639160156 [HeaterCheck.cs@88] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 147.75 with temperature 142.7916717529297 [HeaterCheck.cs@67] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (223 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2998894. SinceCollect=00:01:00.7078670. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:23:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3797, gen1=832, gen2=52, LatencyMode=Interactive, FreeMemory=5856165888, Live=442885208, HeapSizeBytes=509264168, FragmentedBytes=66781616, TotalCommittedBytes=518651904, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:23:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:23:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:23:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.75 with temperature 55.75 [HeaterCheck.cs@67] -06/14/2026 18:23:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.75 with temperature 55.75 [HeaterCheck.cs@67] -06/14/2026 18:23:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=61.75,powderChamber1=61.75,powderChamber2=61.75,powderChamber3=61.75,powderChamber4=61.75 [ControlledHeating.cs@169] -06/14/2026 18:23:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 61.75 with temperature 55.25 [HeaterCheck.cs@88] -06/14/2026 18:23:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 147.75 with temperature 143 [HeaterCheck.cs@67] -06/14/2026 18:23:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=137.25 that are outside of set tolerance 10 for current step target 147.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:23:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1354.5365058, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.008496188297065, Elapsed = 00:22:34.5565294, TimeTotal = 06:15:44.0191181, Remaining = 05:53:09.4625887, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:14.9588463, WeightTotalEstimate = 01:09:14.9588463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:21.4990945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:34.5565294, HeatingEstimate = 00:47:25.4634942, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.0605375, WeightEstimate = 01:09:14.9588463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:23:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.008496188297065;StartedAtUtc;00:22:34.5565294;06:15:44.0191181;05:53:09.4625887;False;232;0;0;00:00:00;01:09:14.9588463;01:09:14.9588463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:21.4990945;00:00:00;02:00:00;00:22:34.5565294;00:47:25.4634942;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.0605375 [PrintingService.cs@1918] -06/14/2026 18:23:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=148.75,printChamber1=148.75,printChamber2=148.75,printChamber3=148.75,printChamber4=148.75 [ControlledHeating.cs@169] -06/14/2026 18:23:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=48.75 that are outside of set tolerance 10 for current step target 61.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:24:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 148.75 with temperature 144 [HeaterCheck.cs@67] -06/14/2026 18:24:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1362.0386566, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.041773994241341, Elapsed = 00:22:42.0586846, TimeTotal = 06:15:44.0191225, Remaining = 05:53:01.9604379, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:14.9588463, WeightTotalEstimate = 01:09:14.9588463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:21.4990945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:42.0586846, HeatingEstimate = 00:47:17.9613434, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.0605375, WeightEstimate = 01:09:14.9588463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:24:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.041773994241341;StartedAtUtc;00:22:42.0586846;06:15:44.0191225;05:53:01.9604379;False;232;0;0;00:00:00;01:09:14.9588463;01:09:14.9588463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:21.4990945;00:00:00;02:00:00;00:22:42.0586846;00:47:17.9613434;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.0605375 [PrintingService.cs@1918] -06/14/2026 18:24:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=149.75,printChamber1=149.75,printChamber2=149.75,printChamber3=149.75,printChamber4=149.75 [ControlledHeating.cs@169] -06/14/2026 18:24:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 149.75 with temperature 144.25 [HeaterCheck.cs@88] -06/14/2026 18:24:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 149.75 with temperature 144.75 [HeaterCheck.cs@67] -06/14/2026 18:24:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.86892700195312, Elapsed=00:00:30.5126018 [ControlledHeating.cs@486] -06/14/2026 18:24:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.86892700195312 after 00:00:30.5126695 [ControlledHeating.cs@493] -06/14/2026 18:24:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0220797. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:24:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633865. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0878424. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1001976. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:24:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 232252549297 (232252549297 @ 0) for mcu = 1920.873050 [14/06/2026 15:26:53] (1935.4379108083333 sec) to 234701269653 (from now=234581269653, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 232252549297 (232252549297 @ 0) for mcu = 1920.873050 [14/06/2026 15:26:53] (1935.4379108083333 sec) to 234701269653 (from external timestamp, flags=None, requested=234701269653 (234701269653 @ 0) for mcu = 1941.279394 [14/06/2026 15:27:14] (1955.843913775 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 232252549297 (232252549297 @ 0) for mcu = 1920.873050 [14/06/2026 15:26:53] (1935.4379108083333 sec) to 234701269653 (from external timestamp, flags=None, requested=234701269653 (234701269653 @ 0) for mcu = 1941.279394 [14/06/2026 15:27:14] (1955.843913775 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1369.5408554, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.075052292230917, Elapsed = 00:22:49.5609548, TimeTotal = 06:15:44.0191939, Remaining = 05:52:54.4582391, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:14.9588463, WeightTotalEstimate = 01:09:14.9588463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:21.4990945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:49.5609548, HeatingEstimate = 00:47:10.4591446, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.0605375, WeightEstimate = 01:09:14.9588463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:24:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.075052292230917;StartedAtUtc;00:22:49.5609548;06:15:44.0191939;05:52:54.4582391;False;232;0;0;00:00:00;01:09:14.9588463;01:09:14.9588463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:21.4990945;00:00:00;02:00:00;00:22:49.5609548;00:47:10.4591446;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.0605375 [PrintingService.cs@1918] -06/14/2026 18:24:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=150.75,printChamber1=150.75,printChamber2=150.75,printChamber3=150.75,printChamber4=150.75 [ControlledHeating.cs@169] -06/14/2026 18:24:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 150.75 with temperature 145.5 [HeaterCheck.cs@88] -06/14/2026 18:24:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 150.75 with temperature 144.5 [HeaterCheck.cs@88] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262872, estimate=49.337884670798246 for layer 32, Z=3.201 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 7 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 33, start=0, count=232, Z=3.3009999 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 33, Z=3.3009999 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 34, start=0, count=232, Z=3.401 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 34, Z=3.401 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 35, start=0, count=232, Z=3.501 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 35, Z=3.501 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 36, start=0, count=232, Z=3.601 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 36, Z=3.601 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 37, start=0, count=232, Z=3.701 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 37, Z=3.701 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 38, start=0, count=232, Z=3.8009999 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 38, Z=3.8009999 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 39, start=0, count=232, Z=3.901 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 39, Z=3.901 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 40, start=0, count=232, Z=4.001 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 40, Z=4.001 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 41, start=0, count=232, Z=4.101 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 41, Z=4.101 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 42, start=0, count=232, Z=4.201 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 42, Z=4.201 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 43, start=0, count=232, Z=4.301 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 43, Z=4.301 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 44, start=0, count=232, Z=4.401 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 44, Z=4.401 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 45, start=0, count=232, Z=4.501 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 45, Z=4.501 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 46, start=0, count=232, Z=4.601 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 46, Z=4.601 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 47, start=0, count=232, Z=4.701 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 47, Z=4.701 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 48, start=0, count=232, Z=4.801 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 48, Z=4.801 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 49, start=0, count=232, Z=4.901 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 49, Z=4.901 [PrintingService.cs@1524] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/14/2026 18:24:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 50, start=0, count=232, Z=5.001 [PrintingService.cs@1518] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 144, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.75 with temperature 145.75 [HeaterCheck.cs@67] -06/14/2026 18:24:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.1500860 ~ 5.92 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:24:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150.75 with temperature 146.5 [HeaterCheck.cs@67] -06/14/2026 18:24:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1377.0434221, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.09730113112478, Elapsed = 00:22:57.0634393, TimeTotal = 06:16:24.8028445, Remaining = 05:53:27.7394052, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:55.7425791, WeightTotalEstimate = 01:09:55.7425791, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:02.2828273, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:57.0634393, HeatingEstimate = 00:47:02.9565779, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:22.8442703, WeightEstimate = 01:09:55.7425791 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:24:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.09730113112478;StartedAtUtc;00:22:57.0634393;06:16:24.8028445;05:53:27.7394052;False;232;0;0;00:00:00;01:09:55.7425791;01:09:55.7425791;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:02.2828273;00:00:00;02:00:00;00:22:57.0634393;00:47:02.9565779;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:22.8442703 [PrintingService.cs@1918] -06/14/2026 18:24:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=151.75,printChamber1=151.75,printChamber2=151.75,printChamber3=151.75,printChamber4=151.75 [ControlledHeating.cs@169] -06/14/2026 18:24:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0122023. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2073498. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:24:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:24:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:24:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 151.75 with temperature 147 [HeaterCheck.cs@67] -06/14/2026 18:24:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1384.5470312, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.130525277163868, Elapsed = 00:23:04.5670471, TimeTotal = 06:16:24.8028432, Remaining = 05:53:20.2357961, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:55.7425791, WeightTotalEstimate = 01:09:55.7425791, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:02.2828273, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:04.5670471, HeatingEstimate = 00:46:55.4529688, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:22.8442703, WeightEstimate = 01:09:55.7425791 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:24:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.130525277163868;StartedAtUtc;00:23:04.5670471;06:16:24.8028432;05:53:20.2357961;False;232;0;0;00:00:00;01:09:55.7425791;01:09:55.7425791;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:02.2828273;00:00:00;02:00:00;00:23:04.5670471;00:46:55.4529688;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:22.8442703 [PrintingService.cs@1918] -06/14/2026 18:24:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=152.75,printChamber1=152.75,printChamber2=152.75,printChamber3=152.75,printChamber4=152.75 [ControlledHeating.cs@169] -06/14/2026 18:24:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 152.75 with temperature 146.75 [HeaterCheck.cs@88] -06/14/2026 18:24:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 152.75 with temperature 147.75 [HeaterCheck.cs@67] -06/14/2026 18:24:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 152.75 with temperature 148.25 [HeaterCheck.cs@67] -06/14/2026 18:24:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1392.0471069, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.163733823045434, Elapsed = 00:23:12.0671323, TimeTotal = 06:16:24.8028527, Remaining = 05:53:12.7357204, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:55.7425791, WeightTotalEstimate = 01:09:55.7425791, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:02.2828273, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:12.0671323, HeatingEstimate = 00:46:47.9528931, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:22.8442703, WeightEstimate = 01:09:55.7425791 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:24:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.163733823045434;StartedAtUtc;00:23:12.0671323;06:16:24.8028527;05:53:12.7357204;False;232;0;0;00:00:00;01:09:55.7425791;01:09:55.7425791;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:02.2828273;00:00:00;02:00:00;00:23:12.0671323;00:46:47.9528931;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:22.8442703 [PrintingService.cs@1918] -06/14/2026 18:24:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=153.75,printChamber1=153.75,printChamber2=153.75,printChamber3=153.75,printChamber4=153.75 [ControlledHeating.cs@169] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.7265167236328, Elapsed=00:00:30.2075291 [ControlledHeating.cs@486] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.7265167236328 after 00:00:30.2076202 [ControlledHeating.cs@493] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2364867. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633702. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2995210. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3100335. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:24:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 235912790881 (235912790881 @ 0) for mcu = 1951.375633 [14/06/2026 15:27:24] (1965.9399240083333 sec) to 238326369632 (from now=238206369632, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 235912790881 (235912790881 @ 0) for mcu = 1951.375633 [14/06/2026 15:27:24] (1965.9399240083333 sec) to 238326369632 (from external timestamp, flags=None, requested=238326369632 (238326369632 @ 0) for mcu = 1971.489147 [14/06/2026 15:27:44] (1986.0530802666667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 235912790881 (235912790881 @ 0) for mcu = 1951.375633 [14/06/2026 15:27:24] (1965.9399240083333 sec) to 238326369632 (from external timestamp, flags=None, requested=238326369632 (238326369632 @ 0) for mcu = 1971.489147 [14/06/2026 15:27:44] (1986.0530802666667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:24:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 61.75 with temperature 48.25 [HeaterCheck.cs@111] -06/14/2026 18:24:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=143,printChamber2=142 that are outside of set tolerance 10 for current step target 153.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:24:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57.5 [HeaterCheck.cs@67] -06/14/2026 18:24:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57.25 [HeaterCheck.cs@67] -06/14/2026 18:24:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57.25 [HeaterCheck.cs@67] -06/14/2026 18:24:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=202691, estimate=38.28719417566739 for layer 50, Z=5.001 [PrintingService.cs@1524] -06/14/2026 18:24:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 8 [PrintingService.cs@1569] -06/14/2026 18:24:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 51, start=0, count=232, Z=5.101 [PrintingService.cs@1518] -06/14/2026 18:24:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 237, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:24:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9834552. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:24:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9834552. Loops = 44. GC duration = 00:00:00.4161932. SinceCollect=00:01:00.8365725. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:24:47 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (17 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:24:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3915, gen1=889, gen2=53, LatencyMode=Interactive, FreeMemory=5879119872, Live=442929784, HeapSizeBytes=509443008, FragmentedBytes=66937144, TotalCommittedBytes=518127616, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:24:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:24:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:24:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57 [HeaterCheck.cs@67] -06/14/2026 18:24:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 61.75 with temperature 53.5 [HeaterCheck.cs@111] -06/14/2026 18:24:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 56.75 [HeaterCheck.cs@67] -06/14/2026 18:24:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57.75 [HeaterCheck.cs@67] -06/14/2026 18:24:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 56.75 [HeaterCheck.cs@67] -06/14/2026 18:25:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 56.75 [HeaterCheck.cs@67] -06/14/2026 18:25:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57.25 [HeaterCheck.cs@67] -06/14/2026 18:25:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57.25 [HeaterCheck.cs@67] -06/14/2026 18:25:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 153.75 with temperature 148.7857208251953 [HeaterCheck.cs@67] -06/14/2026 18:25:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 57 [HeaterCheck.cs@67] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=168.2657012939453, Elapsed=00:00:30.6422286 [ControlledHeating.cs@486] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 168.2657012939453 after 00:00:30.6431002 [ControlledHeating.cs@493] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0370882. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0616326. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1014178. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1146338. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:25:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 239537890860 (239537890860 @ 0) for mcu = 1981.585346 [14/06/2026 15:27:54] (1996.1490905 sec) to 242003296388 (from now=241883296388, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 239537890860 (239537890860 @ 0) for mcu = 1981.585346 [14/06/2026 15:27:54] (1996.1490905 sec) to 242003296388 (from external timestamp, flags=None, requested=242003296388 (242003296388 @ 0) for mcu = 2002.130762 [14/06/2026 15:28:15] (2016.6941365666667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 239537890860 (239537890860 @ 0) for mcu = 1981.585346 [14/06/2026 15:27:54] (1996.1490905 sec) to 242003296388 (from external timestamp, flags=None, requested=242003296388 (242003296388 @ 0) for mcu = 2002.130762 [14/06/2026 15:28:15] (2016.6941365666667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:25:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.75 with temperature 148.75 [HeaterCheck.cs@67] -06/14/2026 18:25:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.75 with temperature 148.75 [HeaterCheck.cs@67] -06/14/2026 18:25:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.75 with temperature 149.75 [HeaterCheck.cs@67] -06/14/2026 18:25:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0200301 ~ 5.98 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:25:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.75 with temperature 148.75 [HeaterCheck.cs@67] -06/14/2026 18:25:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.75 with temperature 149 [HeaterCheck.cs@67] -06/14/2026 18:25:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 153.75 with temperature 149 [HeaterCheck.cs@67] -06/14/2026 18:25:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2214572. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:25:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:25:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:25:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=267980, estimate=37.557698611538775 for layer 51, Z=5.101 [PrintingService.cs@1524] -06/14/2026 18:25:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 8 [PrintingService.cs@1569] -06/14/2026 18:25:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 52, start=0, count=232, Z=5.201 [PrintingService.cs@1518] -06/14/2026 18:25:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 260, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:25:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 58 [HeaterCheck.cs@67] -06/14/2026 18:25:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 153.75 with temperature 142.25 [HeaterCheck.cs@111] -06/14/2026 18:25:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1446.7431785, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.401932851018914, Elapsed = 00:24:06.7633184, TimeTotal = 06:16:38.8518166, Remaining = 05:52:32.0884982, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:09.7914285, WeightTotalEstimate = 01:10:09.7914285, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:16.3316767, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:06.7633184, HeatingEstimate = 00:45:53.2568215, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:36.8931197, WeightEstimate = 01:10:09.7914285 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:25:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.401932851018914;StartedAtUtc;00:24:06.7633184;06:16:38.8518166;05:52:32.0884982;False;232;0;0;00:00:00;01:10:09.7914285;01:10:09.7914285;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:16.3316767;00:00:00;02:00:00;00:24:06.7633184;00:45:53.2568215;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:36.8931197 [PrintingService.cs@1918] -06/14/2026 18:25:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=154.75,printChamber1=154.75,printChamber2=154.75,printChamber3=154.75,printChamber4=154.75 [ControlledHeating.cs@169] -06/14/2026 18:25:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 154.75 with temperature 150 [HeaterCheck.cs@67] -06/14/2026 18:25:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=143.75 that are outside of set tolerance 10 for current step target 154.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:25:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1455.242819, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.439543287571278, Elapsed = 00:24:15.2628374, TimeTotal = 06:16:38.8516951, Remaining = 05:52:23.5888577, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:09.7914285, WeightTotalEstimate = 01:10:09.7914285, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:16.3316767, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:15.2628374, HeatingEstimate = 00:45:44.7571810, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:36.8931197, WeightEstimate = 01:10:09.7914285 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:25:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.439543287571278;StartedAtUtc;00:24:15.2628374;06:16:38.8516951;05:52:23.5888577;False;232;0;0;00:00:00;01:10:09.7914285;01:10:09.7914285;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:16.3316767;00:00:00;02:00:00;00:24:15.2628374;00:45:44.7571810;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:36.8931197 [PrintingService.cs@1918] -06/14/2026 18:25:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=155.75,printChamber1=155.75,printChamber2=155.75,printChamber3=155.75,printChamber4=155.75 [ControlledHeating.cs@169] -06/14/2026 18:25:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 155.75 with temperature 149.75 [HeaterCheck.cs@88] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=168.2238311767578, Elapsed=00:00:30.2064018 [ControlledHeating.cs@486] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 168.2238311767578 after 00:00:30.2064958 [ControlledHeating.cs@493] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2514154. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632282. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3166548. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3285976. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:25:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 243214817616 (243214817616 @ 0) for mcu = 2012.226956 [14/06/2026 15:28:25] (2026.7901468 sec) to 245628903731 (from now=245508903731, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 243214817616 (243214817616 @ 0) for mcu = 2012.226956 [14/06/2026 15:28:25] (2026.7901468 sec) to 245628903731 (from external timestamp, flags=None, requested=245628903731 (245628903731 @ 0) for mcu = 2032.344705 [14/06/2026 15:28:45] (2046.9075310916667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 243214817616 (243214817616 @ 0) for mcu = 2012.226956 [14/06/2026 15:28:25] (2026.7901468 sec) to 245628903731 (from external timestamp, flags=None, requested=245628903731 (245628903731 @ 0) for mcu = 2032.344705 [14/06/2026 15:28:45] (2046.9075310916667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:25:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:25:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=145 that are outside of set tolerance 10 for current step target 155.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:25:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1463.7466561, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.477172808899935, Elapsed = 00:24:23.7666773, TimeTotal = 06:16:38.8516979, Remaining = 05:52:15.0850206, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:09.7914285, WeightTotalEstimate = 01:10:09.7914285, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:16.3316767, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:23.7666773, HeatingEstimate = 00:45:36.2533439, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:36.8931197, WeightEstimate = 01:10:09.7914285 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:17:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:25:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.477172808899935;StartedAtUtc;00:24:23.7666773;06:16:38.8516979;05:52:15.0850206;False;232;0;0;00:00:00;01:10:09.7914285;01:10:09.7914285;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:16.3316767;00:00:00;02:00:00;00:24:23.7666773;00:45:36.2533439;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:36.8931197 [PrintingService.cs@1918] -06/14/2026 18:25:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=156.75,printChamber1=156.75,printChamber2=156.75,printChamber3=156.75,printChamber4=156.75 [ControlledHeating.cs@169] -06/14/2026 18:25:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=202662, estimate=38.449573543417166 for layer 52, Z=5.201 [PrintingService.cs@1524] -06/14/2026 18:25:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 8 [PrintingService.cs@1569] -06/14/2026 18:25:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 53, start=0, count=232, Z=5.301 [PrintingService.cs@1518] -06/14/2026 18:25:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 245, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:25:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:25:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 156.75 with temperature 151.8333282470703 [HeaterCheck.cs@67] -06/14/2026 18:25:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2974009. SinceCollect=00:01:00.7305182. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:25:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4028, gen1=936, gen2=54, LatencyMode=Interactive, FreeMemory=5861982208, Live=442904808, HeapSizeBytes=509483920, FragmentedBytes=66888224, TotalCommittedBytes=519438336, PinnedObjectsCount=25, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:25:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:25:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:25:48 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (583 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:25:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 156.75 with temperature 151.75 [HeaterCheck.cs@67] -06/14/2026 18:25:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 156.75 with temperature 151.7857208251953 [HeaterCheck.cs@67] -06/14/2026 18:25:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1471.2475186, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.509251651089021, Elapsed = 00:24:31.2675371, TimeTotal = 06:16:42.7140440, Remaining = 05:52:11.4465069, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:13.6537773, WeightTotalEstimate = 01:10:13.6537773, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:20.1940255, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:31.2675371, HeatingEstimate = 00:45:28.7524814, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:40.7554685, WeightEstimate = 01:10:13.6537773 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:02. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:25:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.509251651089021;StartedAtUtc;00:24:31.2675371;06:16:42.7140440;05:52:11.4465069;False;232;0;0;00:00:00;01:10:13.6537773;01:10:13.6537773;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:20.1940255;00:00:00;02:00:00;00:24:31.2675371;00:45:28.7524814;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:40.7554685 [PrintingService.cs@1918] -06/14/2026 18:25:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=157.75,printChamber1=157.75,printChamber2=157.75,printChamber3=157.75,printChamber4=157.75 [ControlledHeating.cs@169] -06/14/2026 18:25:58 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=146.5 that are outside of set tolerance 10 for current step target 157.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:26:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 61.75 with temperature 53.75 [HeaterCheck.cs@111] -06/14/2026 18:26:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 157.75 with temperature 153 [HeaterCheck.cs@67] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.8223876953125, Elapsed=00:00:30.5011635 [ControlledHeating.cs@486] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.8223876953125 after 00:00:30.5012507 [ControlledHeating.cs@493] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0178419. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633623. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0827977. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0958487. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:26:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 246840424959 (246840424959 @ 0) for mcu = 2042.440881 [14/06/2026 15:28:55] (2057.003541325 sec) to 249288585306 (from now=249168585306, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 246840424959 (246840424959 @ 0) for mcu = 2042.440881 [14/06/2026 15:28:55] (2057.003541325 sec) to 249288585306 (from external timestamp, flags=None, requested=249288585306 (249288585306 @ 0) for mcu = 2062.842579 [14/06/2026 15:29:15] (2077.40487755 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 246840424959 (246840424959 @ 0) for mcu = 2042.440881 [14/06/2026 15:28:55] (2057.003541325 sec) to 249288585306 (from external timestamp, flags=None, requested=249288585306 (249288585306 @ 0) for mcu = 2062.842579 [14/06/2026 15:29:15] (2077.40487755 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0612846 ~ 5.99 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:26:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9948584. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1987937. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:26:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:26:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:26:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=267951, estimate=37.432657219476326 for layer 53, Z=5.301 [PrintingService.cs@1524] -06/14/2026 18:26:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 8 [PrintingService.cs@1569] -06/14/2026 18:26:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 54, start=0, count=232, Z=5.401 [PrintingService.cs@1518] -06/14/2026 18:26:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 183, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:26:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 58.25 [HeaterCheck.cs@67] -06/14/2026 18:26:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 61.75 with temperature 58.25 [HeaterCheck.cs@67] -06/14/2026 18:26:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 157.75 with temperature 152.75 [HeaterCheck.cs@67] -06/14/2026 18:26:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 157.75 with temperature 152.75 [HeaterCheck.cs@67] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.871826171875, Elapsed=00:00:30.1997348 [ControlledHeating.cs@486] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.871826171875 after 00:00:30.2000273 [ControlledHeating.cs@493] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2159974. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631910. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2791900. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2920005. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:26:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 250500106534 (250500106534 @ 0) for mcu = 2072.938641 [14/06/2026 15:29:25] (2087.5008877833334 sec) to 252912103294 (from now=252792103294, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 250500106534 (250500106534 @ 0) for mcu = 2072.938641 [14/06/2026 15:29:25] (2087.5008877833334 sec) to 252912103294 (from external timestamp, flags=None, requested=252912103294 (252912103294 @ 0) for mcu = 2093.038920 [14/06/2026 15:29:46] (2107.6008607833332 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 250500106534 (250500106534 @ 0) for mcu = 2072.938641 [14/06/2026 15:29:25] (2087.5008877833334 sec) to 252912103294 (from external timestamp, flags=None, requested=252912103294 (252912103294 @ 0) for mcu = 2093.038920 [14/06/2026 15:29:46] (2107.6008607833332 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:26:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:26:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157.75 with temperature 152.75 [HeaterCheck.cs@67] -06/14/2026 18:26:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157.75 with temperature 153 [HeaterCheck.cs@67] -06/14/2026 18:26:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 157.75 with temperature 152.75 [HeaterCheck.cs@67] -06/14/2026 18:26:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1526.7488365, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.752552210162789, Elapsed = 00:25:26.7688618, TimeTotal = 06:16:50.2488997, Remaining = 05:51:23.4800379, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:21.1886262, WeightTotalEstimate = 01:10:21.1886262, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:27.7288744, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:26.7688618, HeatingEstimate = 00:44:33.2511635, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:48.2903174, WeightEstimate = 01:10:21.1886262 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:26:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.752552210162789;StartedAtUtc;00:25:26.7688618;06:16:50.2488997;05:51:23.4800379;False;232;0;0;00:00:00;01:10:21.1886262;01:10:21.1886262;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:27.7288744;00:00:00;02:00:00;00:25:26.7688618;00:44:33.2511635;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:48.2903174 [PrintingService.cs@1918] -06/14/2026 18:26:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=158.75,printChamber1=158.75,printChamber2=158.75,printChamber3=158.75,printChamber4=158.75 [ControlledHeating.cs@169] -06/14/2026 18:26:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:26:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2913812. SinceCollect=00:01:00.6861635. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:26:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (70 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:26:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4150, gen1=1058, gen2=55, LatencyMode=Interactive, FreeMemory=5858541568, Live=442743368, HeapSizeBytes=509414288, FragmentedBytes=66906944, TotalCommittedBytes=519438336, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:26:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:26:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:26:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 158.75 with temperature 153.75 [HeaterCheck.cs@67] -06/14/2026 18:26:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 158.75 with temperature 147.75 [HeaterCheck.cs@111] -06/14/2026 18:26:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=62.75,powderChamber1=62.75,powderChamber2=62.75,powderChamber3=62.75,powderChamber4=62.75 [ControlledHeating.cs@169] -06/14/2026 18:26:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=147.75 that are outside of set tolerance 10 for current step target 158.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:26:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=202676, estimate=38.301073636561874 for layer 54, Z=5.401 [PrintingService.cs@1524] -06/14/2026 18:26:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 8 [PrintingService.cs@1569] -06/14/2026 18:26:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 55, start=0, count=232, Z=5.501 [PrintingService.cs@1518] -06/14/2026 18:26:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:26:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=51.75 that are outside of set tolerance 10 for current step target 62.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:27:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1540.2470326, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.810190148161273, Elapsed = 00:25:40.2670510, TimeTotal = 06:16:57.0931720, Remaining = 05:51:16.8261210, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:28.0329054, WeightTotalEstimate = 01:10:28.0329054, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:34.5731536, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:40.2670510, HeatingEstimate = 00:44:19.7529674, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:55.1345966, WeightEstimate = 01:10:28.0329054 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:27:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.810190148161273;StartedAtUtc;00:25:40.2670510;06:16:57.0931720;05:51:16.8261210;False;232;0;0;00:00:00;01:10:28.0329054;01:10:28.0329054;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:34.5731536;00:00:00;02:00:00;00:25:40.2670510;00:44:19.7529674;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:55.1345966 [PrintingService.cs@1918] -06/14/2026 18:27:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=159.75,printChamber1=159.75,printChamber2=159.75,printChamber3=159.75,printChamber4=159.75 [ControlledHeating.cs@169] -06/14/2026 18:27:00 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/14/2026 18:27:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/14/2026 18:27:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/14/2026 18:27:01 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/14/2026 18:27:01 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/14/2026 18:27:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/14/2026 18:27:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 62.75 with temperature 54.25 [HeaterCheck.cs@111] -06/14/2026 18:27:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1547.7466046, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.843349489931105, Elapsed = 00:25:47.7667381, TimeTotal = 06:16:57.0932871, Remaining = 05:51:09.3265490, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:28.0329054, WeightTotalEstimate = 01:10:28.0329054, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:34.5731536, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:47.7667381, HeatingEstimate = 00:44:12.2533954, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:55.1345966, WeightEstimate = 01:10:28.0329054 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:27:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.843349489931105;StartedAtUtc;00:25:47.7667381;06:16:57.0932871;05:51:09.3265490;False;232;0;0;00:00:00;01:10:28.0329054;01:10:28.0329054;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:34.5731536;00:00:00;02:00:00;00:25:47.7667381;00:44:12.2533954;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:55.1345966 [PrintingService.cs@1918] -06/14/2026 18:27:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=160.75,printChamber1=160.75,printChamber2=160.75,printChamber3=160.75,printChamber4=160.75 [ControlledHeating.cs@169] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.2464599609375, Elapsed=00:00:30.4947762 [ControlledHeating.cs@486] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.2464599609375 after 00:00:30.4948382 [ControlledHeating.cs@493] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0251097. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633540. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0879483. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1010362. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:27:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 254123624522 (254123624522 @ 0) for mcu = 2103.134928 [14/06/2026 15:29:56] (2117.6968710166666 sec) to 256571579447 (from now=256451579447, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 254123624522 (254123624522 @ 0) for mcu = 2103.134928 [14/06/2026 15:29:56] (2117.6968710166666 sec) to 256571579447 (from external timestamp, flags=None, requested=256571579447 (256571579447 @ 0) for mcu = 2123.534814 [14/06/2026 15:30:16] (2138.096495391667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 254123624522 (254123624522 @ 0) for mcu = 2103.134928 [14/06/2026 15:29:56] (2117.6968710166666 sec) to 256571579447 (from external timestamp, flags=None, requested=256571579447 (256571579447 @ 0) for mcu = 2123.534814 [14/06/2026 15:30:16] (2138.096495391667 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:27:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 62.75 with temperature 51 [HeaterCheck.cs@111] -06/14/2026 18:27:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 160.75 with temperature 157 [HeaterCheck.cs@67] -06/14/2026 18:27:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0352274 ~ 6 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:27:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1555.2463394, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.8765086420523325, Elapsed = 00:25:55.2663672, TimeTotal = 06:16:57.0931814, Remaining = 05:51:01.8268142, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:28.0329054, WeightTotalEstimate = 01:10:28.0329054, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:34.5731536, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:55.2663672, HeatingEstimate = 00:44:04.7536606, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:55.1345966, WeightEstimate = 01:10:28.0329054 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:27:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.8765086420523325;StartedAtUtc;00:25:55.2663672;06:16:57.0931814;05:51:01.8268142;False;232;0;0;00:00:00;01:10:28.0329054;01:10:28.0329054;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:34.5731536;00:00:00;02:00:00;00:25:55.2663672;00:44:04.7536606;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:55.1345966 [PrintingService.cs@1918] -06/14/2026 18:27:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=161.75,printChamber1=161.75,printChamber2=161.75,printChamber3=161.75,printChamber4=161.75 [ControlledHeating.cs@169] -06/14/2026 18:27:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 62.75 with temperature 59 [HeaterCheck.cs@67] -06/14/2026 18:27:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 62.75 with temperature 59 [HeaterCheck.cs@67] -06/14/2026 18:27:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2043667. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:27:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:27:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:27:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1562.7473589, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.909673886293446, Elapsed = 00:26:02.7673810, TimeTotal = 06:16:57.0931757, Remaining = 05:50:54.3257947, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:28.0329054, WeightTotalEstimate = 01:10:28.0329054, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:34.5731536, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:26:02.7673810, HeatingEstimate = 00:43:57.2526411, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:55.1345966, WeightEstimate = 01:10:28.0329054 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:27:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.909673886293446;StartedAtUtc;00:26:02.7673810;06:16:57.0931757;05:50:54.3257947;False;232;0;0;00:00:00;01:10:28.0329054;01:10:28.0329054;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:34.5731536;00:00:00;02:00:00;00:26:02.7673810;00:43:57.2526411;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:55.1345966 [PrintingService.cs@1918] -06/14/2026 18:27:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=162.75,printChamber1=162.75,printChamber2=162.75,printChamber3=162.75,printChamber4=162.75 [ControlledHeating.cs@169] -06/14/2026 18:27:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 162.75 with temperature 156.25 [HeaterCheck.cs@88] -06/14/2026 18:27:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 162.75 with temperature 158 [HeaterCheck.cs@67] -06/14/2026 18:27:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 162.75 with temperature 158 [HeaterCheck.cs@67] -06/14/2026 18:27:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 62.75 with temperature 59 [HeaterCheck.cs@67] -06/14/2026 18:27:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 162.75 with temperature 157.82142639160156 [HeaterCheck.cs@67] -06/14/2026 18:27:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 162.75 with temperature 157.82142639160156 [HeaterCheck.cs@67] -06/14/2026 18:27:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 162.75 with temperature 159.5 [HeaterCheck.cs@67] -06/14/2026 18:27:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1570.2468511, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 6.942832384277235, Elapsed = 00:26:10.2668691, TimeTotal = 06:16:57.0931716, Remaining = 05:50:46.8263025, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:28.0329054, WeightTotalEstimate = 01:10:28.0329054, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:34.5731536, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:26:10.2668691, HeatingEstimate = 00:43:49.7531489, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:55.1345966, WeightEstimate = 01:10:28.0329054 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:27:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.942832384277235;StartedAtUtc;00:26:10.2668691;06:16:57.0931716;05:50:46.8263025;False;232;0;0;00:00:00;01:10:28.0329054;01:10:28.0329054;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:34.5731536;00:00:00;02:00:00;00:26:10.2668691;00:43:49.7531489;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:55.1345966 [PrintingService.cs@1918] -06/14/2026 18:27:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=163.75,printChamber1=163.75,printChamber2=163.75,printChamber3=163.75,printChamber4=163.75 [ControlledHeating.cs@169] -06/14/2026 18:27:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268644, estimate=37.0749167974239 for layer 55, Z=5.501 [PrintingService.cs@1524] -06/14/2026 18:27:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 38, island count 5 [PrintingService.cs@1569] -06/14/2026 18:27:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 56, start=0, count=232, Z=5.601 [PrintingService.cs@1518] -06/14/2026 18:27:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:27:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=152.25 that are outside of set tolerance 10 for current step target 163.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.2550506591797, Elapsed=00:00:30.1932850 [ControlledHeating.cs@486] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.2550506591797 after 00:00:30.1933385 [ControlledHeating.cs@493] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2172948. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630828. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2822684. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2951014. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:27:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 257783100675 (257783100675 @ 0) for mcu = 2133.630828 [14/06/2026 15:30:26] (2148.192505625 sec) to 260194742086 (from now=260074742086, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 257783100675 (257783100675 @ 0) for mcu = 2133.630828 [14/06/2026 15:30:26] (2148.192505625 sec) to 260194742086 (from external timestamp, flags=None, requested=260194742086 (260194742086 @ 0) for mcu = 2153.728057 [14/06/2026 15:30:46] (2168.2895173833335 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 257783100675 (257783100675 @ 0) for mcu = 2133.630828 [14/06/2026 15:30:26] (2148.192505625 sec) to 260194742086 (from external timestamp, flags=None, requested=260194742086 (260194742086 @ 0) for mcu = 2153.728057 [14/06/2026 15:30:46] (2168.2895173833335 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:27:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:27:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 163.75 with temperature 158.75 [HeaterCheck.cs@67] -06/14/2026 18:27:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 163.75 with temperature 159 [HeaterCheck.cs@67] -06/14/2026 18:27:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:27:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2916244. SinceCollect=00:01:00.6850522. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:27:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (10 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:27:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4273, gen1=1157, gen2=56, LatencyMode=Interactive, FreeMemory=5870813184, Live=442953776, HeapSizeBytes=509602200, FragmentedBytes=67077736, TotalCommittedBytes=518914048, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:27:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:27:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:27:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 163.75 with temperature 158.75 [HeaterCheck.cs@67] -06/14/2026 18:28:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=63.75,powderChamber1=63.75,powderChamber2=63.75,powderChamber3=63.75,powderChamber4=63.75 [ControlledHeating.cs@169] -06/14/2026 18:28:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203027, estimate=37.74353225356349 for layer 56, Z=5.601 [PrintingService.cs@1524] -06/14/2026 18:28:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 39, island count 5 [PrintingService.cs@1569] -06/14/2026 18:28:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 57, start=0, count=232, Z=5.701 [PrintingService.cs@1518] -06/14/2026 18:28:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.78883361816406, Elapsed=00:00:30.4844702 [ControlledHeating.cs@486] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.78883361816406 after 00:00:30.4846992 [ControlledHeating.cs@493] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0168310. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634239. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0803907. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0900616. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:28:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 261406263314 (261406263314 @ 0) for mcu = 2163.824182 [14/06/2026 15:30:56] (2178.385527616667 sec) to 263852375239 (from now=263732375239, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 261406263314 (261406263314 @ 0) for mcu = 2163.824182 [14/06/2026 15:30:56] (2178.385527616667 sec) to 263852375239 (from external timestamp, flags=None, requested=263852375239 (263852375239 @ 0) for mcu = 2184.208668 [14/06/2026 15:31:17] (2198.769793658333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:28:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 261406263314 (261406263314 @ 0) for mcu = 2163.824182 [14/06/2026 15:30:56] (2178.385527616667 sec) to 263852375239 (from external timestamp, flags=None, requested=263852375239 (263852375239 @ 0) for mcu = 2184.208668 [14/06/2026 15:31:17] (2198.769793658333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:28:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 63.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:28:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=64.75,powderChamber1=64.75,powderChamber2=64.75,powderChamber3=64.75,powderChamber4=64.75 [ControlledHeating.cs@169] -06/14/2026 18:28:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.0044000 ~ 5.93 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:28:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:28:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:28:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60.5 [HeaterCheck.cs@67] -06/14/2026 18:28:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=50.75 that are outside of set tolerance 10 for current step target 64.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:28:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 163.75 with temperature 158.7857208251953 [HeaterCheck.cs@67] -06/14/2026 18:28:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1905226. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:28:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:28:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:28:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60.25 [HeaterCheck.cs@67] -06/14/2026 18:28:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 64.75 with temperature 57.5 [HeaterCheck.cs@111] -06/14/2026 18:28:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:28:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 61 [HeaterCheck.cs@67] -06/14/2026 18:28:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1635.8386033, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.228993372920639, Elapsed = 00:27:15.8586258, TimeTotal = 06:17:09.1343955, Remaining = 05:49:53.2757697, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:40.0741248, WeightTotalEstimate = 01:10:40.0741248, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:46.6143730, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:15.8586258, HeatingEstimate = 00:42:44.1613967, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:07.1758160, WeightEstimate = 01:10:40.0741248 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:28:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.228993372920639;StartedAtUtc;00:27:15.8586258;06:17:09.1343955;05:49:53.2757697;False;232;0;0;00:00:00;01:10:40.0741248;01:10:40.0741248;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:46.6143730;00:00:00;02:00:00;00:27:15.8586258;00:42:44.1613967;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:07.1758160 [PrintingService.cs@1918] -06/14/2026 18:28:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=164.75,printChamber1=164.75,printChamber2=164.75,printChamber3=164.75,printChamber4=164.75 [ControlledHeating.cs@169] -06/14/2026 18:28:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 164.75 with temperature 159.25 [HeaterCheck.cs@88] -06/14/2026 18:28:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268618, estimate=36.97586925647974 for layer 57, Z=5.701 [PrintingService.cs@1524] -06/14/2026 18:28:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 164.75 with temperature 160.25 [HeaterCheck.cs@67] -06/14/2026 18:28:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 40, island count 5 [PrintingService.cs@1569] -06/14/2026 18:28:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 58, start=0, count=232, Z=5.801 [PrintingService.cs@1518] -06/14/2026 18:28:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:28:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:28:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.89691162109375, Elapsed=00:00:30.2084674 [ControlledHeating.cs@486] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.89691162109375 after 00:00:30.2085349 [ControlledHeating.cs@493] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2232719. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633257. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2871750. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2985356. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:28:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 265063896467 (265063896467 @ 0) for mcu = 2194.304782 [14/06/2026 15:31:27] (2208.8658038916665 sec) to 267477347394 (from now=267357347394, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 265063896467 (265063896467 @ 0) for mcu = 2194.304782 [14/06/2026 15:31:27] (2208.8658038916665 sec) to 267477347394 (from external timestamp, flags=None, requested=267477347394 (267477347394 @ 0) for mcu = 2214.417095 [14/06/2026 15:31:47] (2228.97789495 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 265063896467 (265063896467 @ 0) for mcu = 2194.304782 [14/06/2026 15:31:27] (2208.8658038916665 sec) to 267477347394 (from external timestamp, flags=None, requested=267477347394 (267477347394 @ 0) for mcu = 2214.417095 [14/06/2026 15:31:47] (2228.97789495 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:28:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:28:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:28:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:28:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=154 that are outside of set tolerance 10 for current step target 164.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:28:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1644.3473159, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.264226193815554, Elapsed = 00:27:24.3673418, TimeTotal = 06:17:16.5107298, Remaining = 05:49:52.1433880, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:47.4504557, WeightTotalEstimate = 01:10:47.4504557, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:53.9907039, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:24.3673418, HeatingEstimate = 00:42:35.6526841, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:14.5521469, WeightEstimate = 01:10:47.4504557 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:28:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.264226193815554;StartedAtUtc;00:27:24.3673418;06:17:16.5107298;05:49:52.1433880;False;232;0;0;00:00:00;01:10:47.4504557;01:10:47.4504557;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:53.9907039;00:00:00;02:00:00;00:27:24.3673418;00:42:35.6526841;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:14.5521469 [PrintingService.cs@1918] -06/14/2026 18:28:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=165.75,printChamber1=165.75,printChamber2=165.75,printChamber3=165.75,printChamber4=165.75 [ControlledHeating.cs@169] -06/14/2026 18:28:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:28:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:28:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60.25 [HeaterCheck.cs@67] -06/14/2026 18:28:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9874196. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:28:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (138 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:28:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9874196. Loops = 44. GC duration = 00:00:00.2941578. SinceCollect=00:01:00.7033121. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:28:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4397, gen1=1175, gen2=57, LatencyMode=Interactive, FreeMemory=5862113280, Live=442763128, HeapSizeBytes=509603064, FragmentedBytes=67237424, TotalCommittedBytes=515751936, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:28:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:28:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:28:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1651.8470341, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.297357246956701, Elapsed = 00:27:31.8670559, TimeTotal = 06:17:16.5107257, Remaining = 05:49:44.6436698, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:47.4504557, WeightTotalEstimate = 01:10:47.4504557, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:53.9907039, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:31.8670559, HeatingEstimate = 00:42:28.1529659, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:14.5521469, WeightEstimate = 01:10:47.4504557 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:28:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.297357246956701;StartedAtUtc;00:27:31.8670559;06:17:16.5107257;05:49:44.6436698;False;232;0;0;00:00:00;01:10:47.4504557;01:10:47.4504557;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:53.9907039;00:00:00;02:00:00;00:27:31.8670559;00:42:28.1529659;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:14.5521469 [PrintingService.cs@1918] -06/14/2026 18:28:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=166.75,printChamber1=166.75,printChamber2=166.75,printChamber3=166.75,printChamber4=166.75 [ControlledHeating.cs@169] -06/14/2026 18:28:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 166.75 with temperature 161.75 [HeaterCheck.cs@67] -06/14/2026 18:28:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 166.75 with temperature 161.75 [HeaterCheck.cs@67] -06/14/2026 18:28:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 166.75 with temperature 161.75 [HeaterCheck.cs@67] -06/14/2026 18:28:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1659.3467106, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.330488120806749, Elapsed = 00:27:39.3667295, TimeTotal = 06:17:16.5107228, Remaining = 05:49:37.1439933, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:47.4504557, WeightTotalEstimate = 01:10:47.4504557, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:53.9907039, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:39.3667295, HeatingEstimate = 00:42:20.6532894, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:14.5521469, WeightEstimate = 01:10:47.4504557 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:28:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.330488120806749;StartedAtUtc;00:27:39.3667295;06:17:16.5107228;05:49:37.1439933;False;232;0;0;00:00:00;01:10:47.4504557;01:10:47.4504557;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:53.9907039;00:00:00;02:00:00;00:27:39.3667295;00:42:20.6532894;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:14.5521469 [PrintingService.cs@1918] -06/14/2026 18:28:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=167.75,printChamber1=167.75,printChamber2=167.75,printChamber3=167.75,printChamber4=167.75 [ControlledHeating.cs@169] -06/14/2026 18:28:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 167.75 with temperature 162.7142791748047 [HeaterCheck.cs@88] -06/14/2026 18:28:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 167.75 with temperature 162.25 [HeaterCheck.cs@88] -06/14/2026 18:28:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 167.75 with temperature 162 [HeaterCheck.cs@88] -06/14/2026 18:28:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 167.75 with temperature 163.5 [HeaterCheck.cs@67] -06/14/2026 18:29:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 167.75 with temperature 163.25 [HeaterCheck.cs@67] -06/14/2026 18:29:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 167.75 with temperature 162.75 [HeaterCheck.cs@67] -06/14/2026 18:29:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 167.75 with temperature 162.75 [HeaterCheck.cs@67] -06/14/2026 18:29:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 64.75 with temperature 52 [HeaterCheck.cs@111] -06/14/2026 18:29:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 167.75 with temperature 162.75 [HeaterCheck.cs@67] -06/14/2026 18:29:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 167.75 with temperature 164 [HeaterCheck.cs@67] -06/14/2026 18:29:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 167.75 with temperature 163 [HeaterCheck.cs@67] -06/14/2026 18:29:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=156.25 that are outside of set tolerance 10 for current step target 167.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:29:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203037, estimate=37.95332167374624 for layer 58, Z=5.801 [PrintingService.cs@1524] -06/14/2026 18:29:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 41, island count 5 [PrintingService.cs@1569] -06/14/2026 18:29:07 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 59, start=0, count=232, Z=5.901 [PrintingService.cs@1518] -06/14/2026 18:29:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.85513305664062, Elapsed=00:00:30.4964722 [ControlledHeating.cs@486] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.85513305664062 after 00:00:30.4965398 [ControlledHeating.cs@493] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0159885. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633938. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0805371. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0909849. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:29:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 268688868622 (268688868622 @ 0) for mcu = 2224.513222 [14/06/2026 15:31:57] (2239.0739051833334 sec) to 271136807206 (from now=271016807206, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 268688868622 (268688868622 @ 0) for mcu = 2224.513222 [14/06/2026 15:31:57] (2239.0739051833334 sec) to 271136807206 (from external timestamp, flags=None, requested=271136807206 (271136807206 @ 0) for mcu = 2244.912944 [14/06/2026 15:32:17] (2259.473393383333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 268688868622 (268688868622 @ 0) for mcu = 2224.513222 [14/06/2026 15:31:57] (2239.0739051833334 sec) to 271136807206 (from external timestamp, flags=None, requested=271136807206 (271136807206 @ 0) for mcu = 2244.912944 [14/06/2026 15:32:17] (2259.473393383333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:29:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 167.75 with temperature 164.25 [HeaterCheck.cs@67] -06/14/2026 18:29:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60.75 [HeaterCheck.cs@67] -06/14/2026 18:29:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:29:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0361181 ~ 5.98 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:29:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 64.75 with temperature 60.25 [HeaterCheck.cs@67] -06/14/2026 18:29:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1999402. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:29:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:29:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:29:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1682.8511445, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.434322407939255, Elapsed = 00:28:02.8711911, TimeTotal = 06:17:16.5107505, Remaining = 05:49:13.6395594, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:47.4504557, WeightTotalEstimate = 01:10:47.4504557, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:53.9907039, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:02.8711911, HeatingEstimate = 00:41:57.1488555, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:14.5521469, WeightEstimate = 01:10:47.4504557 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:29:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.434322407939255;StartedAtUtc;00:28:02.8711911;06:17:16.5107505;05:49:13.6395594;False;232;0;0;00:00:00;01:10:47.4504557;01:10:47.4504557;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:53.9907039;00:00:00;02:00:00;00:28:02.8711911;00:41:57.1488555;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:14.5521469 [PrintingService.cs@1918] -06/14/2026 18:29:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=168.75,printChamber1=168.75,printChamber2=168.75,printChamber3=168.75,printChamber4=168.75 [ControlledHeating.cs@169] -06/14/2026 18:29:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=158.25 that are outside of set tolerance 10 for current step target 168.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:29:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1693.3511347, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.4807074868285595, Elapsed = 00:28:13.3711523, TimeTotal = 06:17:16.5107215, Remaining = 05:49:03.1395692, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:47.4504557, WeightTotalEstimate = 01:10:47.4504557, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:53.9907039, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:13.3711523, HeatingEstimate = 00:41:46.6488653, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:14.5521469, WeightEstimate = 01:10:47.4504557 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:29:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.4807074868285595;StartedAtUtc;00:28:13.3711523;06:17:16.5107215;05:49:03.1395692;False;232;0;0;00:00:00;01:10:47.4504557;01:10:47.4504557;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:53.9907039;00:00:00;02:00:00;00:28:13.3711523;00:41:46.6488653;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:14.5521469 [PrintingService.cs@1918] -06/14/2026 18:29:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=169.75,printChamber1=169.75,printChamber2=169.75,printChamber3=169.75,printChamber4=169.75 [ControlledHeating.cs@169] -06/14/2026 18:29:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 169.75 with temperature 164.75 [HeaterCheck.cs@67] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=168.07435607910156, Elapsed=00:00:30.2150626 [ControlledHeating.cs@486] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 168.07435607910156 after 00:00:30.2151527 [ControlledHeating.cs@493] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2333400. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633447. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2949760. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3075040. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:29:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 272348328434 (272348328434 @ 0) for mcu = 2255.009067 [14/06/2026 15:32:28] (2269.5694036166665 sec) to 274762747539 (from now=274642747539, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 272348328434 (272348328434 @ 0) for mcu = 2255.009067 [14/06/2026 15:32:28] (2269.5694036166665 sec) to 274762747539 (from external timestamp, flags=None, requested=274762747539 (274762747539 @ 0) for mcu = 2275.129458 [14/06/2026 15:32:48] (2289.689562825 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 272348328434 (272348328434 @ 0) for mcu = 2255.009067 [14/06/2026 15:32:28] (2269.5694036166665 sec) to 274762747539 (from external timestamp, flags=None, requested=274762747539 (274762747539 @ 0) for mcu = 2275.129458 [14/06/2026 15:32:48] (2289.689562825 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:29:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:29:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268605, estimate=37.07536091588963 for layer 59, Z=5.901 [PrintingService.cs@1524] -06/14/2026 18:29:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 42, island count 5 [PrintingService.cs@1569] -06/14/2026 18:29:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 60, start=0, count=232, Z=6.001 [PrintingService.cs@1518] -06/14/2026 18:29:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:29:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=159 that are outside of set tolerance 10 for current step target 169.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:29:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1701.8557489, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.514451638510635, Elapsed = 00:28:21.8757838, TimeTotal = 06:17:28.0369516, Remaining = 05:49:06.1611678, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:21.8757838, HeatingEstimate = 00:41:38.1442511, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:29:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.514451638510635;StartedAtUtc;00:28:21.8757838;06:17:28.0369516;05:49:06.1611678;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:21.8757838;00:41:38.1442511;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:29:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=170.75,printChamber1=170.75,printChamber2=170.75,printChamber3=170.75,printChamber4=170.75 [ControlledHeating.cs@169] -06/14/2026 18:29:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:29:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 170.75 with temperature 166.25 [HeaterCheck.cs@67] -06/14/2026 18:29:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 170.75 with temperature 166.25 [HeaterCheck.cs@67] -06/14/2026 18:29:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=159.75,printChamber4=160.25 that are outside of set tolerance 10 for current step target 170.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:29:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1710.3550776, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.551979453677308, Elapsed = 00:28:30.3750960, TimeTotal = 06:17:28.0369351, Remaining = 05:48:57.6618391, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:30.3750960, HeatingEstimate = 00:41:29.6449224, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:29:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.551979453677308;StartedAtUtc;00:28:30.3750960;06:17:28.0369351;05:48:57.6618391;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:30.3750960;00:41:29.6449224;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:29:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=171.75,printChamber1=171.75,printChamber2=171.75,printChamber3=171.75,printChamber4=171.75 [ControlledHeating.cs@169] -06/14/2026 18:29:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:29:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2940552. SinceCollect=00:01:00.7020901. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:29:51 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (452 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:29:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4519, gen1=1206, gen2=58, LatencyMode=Interactive, FreeMemory=5857263616, Live=442694752, HeapSizeBytes=509546600, FragmentedBytes=67201264, TotalCommittedBytes=517603328, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:29:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:29:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:29:57 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=160.75 that are outside of set tolerance 10 for current step target 171.75 and final target 172 [ControlledHeating.cs@205] -06/14/2026 18:29:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.75 with temperature 166.75 [HeaterCheck.cs@67] -06/14/2026 18:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1718.8555601, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.58951244702582, Elapsed = 00:28:38.8755825, TimeTotal = 06:17:28.0369391, Remaining = 05:48:49.1613566, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:38.8755825, HeatingEstimate = 00:41:21.1444399, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.58951244702582;StartedAtUtc;00:28:38.8755825;06:17:28.0369391;05:48:49.1613566;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:38.8755825;00:41:21.1444399;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:29:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=172,printChamber1=172,printChamber2=172,printChamber3=172,printChamber4=172 [ControlledHeating.cs@169] -06/14/2026 18:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1718.8573402, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.58952028687477, Elapsed = 00:28:38.8773577, TimeTotal = 06:17:28.0369342, Remaining = 05:48:49.1595765, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:38.8773577, HeatingEstimate = 00:41:21.1426598, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.58952028687477;StartedAtUtc;00:28:38.8773577;06:17:28.0369342;05:48:49.1595765;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:38.8773577;00:41:21.1426598;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:29:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 172 with temperature 166.5 [HeaterCheck.cs@88] -06/14/2026 18:29:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1719.8560418, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.593929955805562, Elapsed = 00:28:39.8760613, TimeTotal = 06:17:28.0369362, Remaining = 05:48:48.1608749, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:39.8760613, HeatingEstimate = 00:41:20.1439582, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:29:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.593929955805562;StartedAtUtc;00:28:39.8760613;06:17:28.0369362;05:48:48.1608749;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:39.8760613;00:41:20.1439582;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1720.8570885, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.598349958875897, Elapsed = 00:28:40.8771050, TimeTotal = 06:17:28.0369332, Remaining = 05:48:47.1598282, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:40.8771050, HeatingEstimate = 00:41:19.1429115, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.598349958875897;StartedAtUtc;00:28:40.8771050;06:17:28.0369332;05:48:47.1598282;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:40.8771050;00:41:19.1429115;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] -06/14/2026 18:30:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:30:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1721.854537, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.602754108747221, Elapsed = 00:28:41.8745589, TimeTotal = 06:17:28.0369386, Remaining = 05:48:46.1623797, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:41.8745589, HeatingEstimate = 00:41:18.1454630, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.602754108747221;StartedAtUtc;00:28:41.8745589;06:17:28.0369386;05:48:46.1623797;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:41.8745589;00:41:18.1454630;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1722.8561591, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.607176760950686, Elapsed = 00:28:42.8762046, TimeTotal = 06:17:28.0369622, Remaining = 05:48:45.1607576, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:42.8762046, HeatingEstimate = 00:41:17.1438409, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.607176760950686;StartedAtUtc;00:28:42.8762046;06:17:28.0369622;05:48:45.1607576;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:42.8762046;00:41:17.1438409;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1723.8593331, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.611606050006789, Elapsed = 00:28:43.8793494, TimeTotal = 06:17:28.0369330, Remaining = 05:48:44.1575836, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:43.8793494, HeatingEstimate = 00:41:16.1406669, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.611606050006789;StartedAtUtc;00:28:43.8793494;06:17:28.0369330;05:48:44.1575836;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:43.8793494;00:41:16.1406669;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1724.8591701, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.616020716265336, Elapsed = 00:28:44.8791845, TimeTotal = 06:17:28.0369311, Remaining = 05:48:43.1577466, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:44.8791845, HeatingEstimate = 00:41:15.1408299, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.616020716265336;StartedAtUtc;00:28:44.8791845;06:17:28.0369311;05:48:43.1577466;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:44.8791845;00:41:15.1408299;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1725.8597645, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.620438727967501, Elapsed = 00:28:45.8797773, TimeTotal = 06:17:28.0369295, Remaining = 05:48:42.1571522, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:45.8797773, HeatingEstimate = 00:41:14.1402355, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.620438727967501;StartedAtUtc;00:28:45.8797773;06:17:28.0369295;05:48:42.1571522;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:45.8797773;00:41:14.1402355;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1726.8602976, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.624857341446202, Elapsed = 00:28:46.8805227, TimeTotal = 06:17:28.0371418, Remaining = 05:48:41.1566191, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:46.8805227, HeatingEstimate = 00:41:13.1397024, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.624857341446202;StartedAtUtc;00:28:46.8805227;06:17:28.0371418;05:48:41.1566191;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:46.8805227;00:41:13.1397024;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1727.8591392, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.629266765471298, Elapsed = 00:28:47.8791547, TimeTotal = 06:17:28.0369322, Remaining = 05:48:40.1577775, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:47.8791547, HeatingEstimate = 00:41:12.1408608, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.629266765471298;StartedAtUtc;00:28:47.8791547;06:17:28.0369322;05:48:40.1577775;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:47.8791547;00:41:12.1408608;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1728.8595877, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.633684132152576, Elapsed = 00:28:48.8796014, TimeTotal = 06:17:28.0369304, Remaining = 05:48:39.1573290, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:58.9766685, WeightTotalEstimate = 01:10:58.9766685, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:05.5169167, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:48.8796014, HeatingEstimate = 00:41:11.1404123, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:26.0783597, WeightEstimate = 01:10:58.9766685 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.633684132152576;StartedAtUtc;00:28:48.8796014;06:17:28.0369304;05:48:39.1573290;False;232;0;0;00:00:00;01:10:58.9766685;01:10:58.9766685;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:05.5169167;00:00:00;02:00:00;00:28:48.8796014;00:41:11.1404123;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:26.0783597 [PrintingService.cs@1918] -06/14/2026 18:30:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203042, estimate=37.75785455049561 for layer 60, Z=6.001 [PrintingService.cs@1524] -06/14/2026 18:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 43, island count 5 [PrintingService.cs@1569] -06/14/2026 18:30:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 61, start=0, count=232, Z=6.101 [PrintingService.cs@1518] -06/14/2026 18:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:30:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 60.75 [HeaterCheck.cs@67] -06/14/2026 18:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1729.8596883, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.636683854904495, Elapsed = 00:28:49.8797025, TimeTotal = 06:17:32.2366955, Remaining = 05:48:42.3569930, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:49.8797025, HeatingEstimate = 00:41:10.1403117, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.636683854904495;StartedAtUtc;00:28:49.8797025;06:17:32.2366955;05:48:42.3569930;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:49.8797025;00:41:10.1403117;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 64.75 with temperature 52.25 [HeaterCheck.cs@111] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=168.0940399169922, Elapsed=00:00:30.4866169 [ControlledHeating.cs@486] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 168.0940399169922 after 00:00:30.4870549 [ControlledHeating.cs@493] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0174386. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632514. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0808619. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0954526. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:30:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 275974268767 (275974268767 @ 0) for mcu = 2285.225596 [14/06/2026 15:32:58] (2299.7855730583333 sec) to 278421553335 (from now=278301553335, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 275974268767 (275974268767 @ 0) for mcu = 2285.225596 [14/06/2026 15:32:58] (2299.7855730583333 sec) to 278421553335 (from external timestamp, flags=None, requested=278421553335 (278421553335 @ 0) for mcu = 2305.619876 [14/06/2026 15:33:18] (2320.179611125 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 275974268767 (275974268767 @ 0) for mcu = 2285.225596 [14/06/2026 15:32:58] (2299.7855730583333 sec) to 278421553335 (from external timestamp, flags=None, requested=278421553335 (278421553335 @ 0) for mcu = 2305.619876 [14/06/2026 15:33:18] (2320.179611125 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1730.8600897, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.641100195080286, Elapsed = 00:28:50.8801022, TimeTotal = 06:17:32.2366938, Remaining = 05:48:41.3565916, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:50.8801022, HeatingEstimate = 00:41:09.1399103, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.641100195080286;StartedAtUtc;00:28:50.8801022;06:17:32.2366938;05:48:41.3565916;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:50.8801022;00:41:09.1399103;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1731.8603327, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.645515845365279, Elapsed = 00:28:51.8803458, TimeTotal = 06:17:32.2366944, Remaining = 05:48:40.3563486, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:51.8803458, HeatingEstimate = 00:41:08.1396673, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.645515845365279;StartedAtUtc;00:28:51.8803458;06:17:32.2366944;05:48:40.3563486;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:51.8803458;00:41:08.1396673;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1732.8598058, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.649928106245456, Elapsed = 00:28:52.8798218, TimeTotal = 06:17:32.2366973, Remaining = 05:48:39.3568755, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:52.8798218, HeatingEstimate = 00:41:07.1401942, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.649928106245456;StartedAtUtc;00:28:52.8798218;06:17:32.2366973;05:48:39.3568755;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:52.8798218;00:41:07.1401942;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1733.8594001, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.654340881787662, Elapsed = 00:28:53.8794140, TimeTotal = 06:17:32.2366952, Remaining = 05:48:38.3572812, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:53.8794140, HeatingEstimate = 00:41:06.1405999, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.654340881787662;StartedAtUtc;00:28:53.8794140;06:17:32.2366952;05:48:38.3572812;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:53.8794140;00:41:06.1405999;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0452935 ~ 6 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:30:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1734.8590756, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.658754020685953, Elapsed = 00:28:54.8790886, TimeTotal = 06:17:32.2366943, Remaining = 05:48:37.3576057, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:54.8790886, HeatingEstimate = 00:41:05.1409244, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.658754020685953;StartedAtUtc;00:28:54.8790886;06:17:32.2366943;05:48:37.3576057;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:54.8790886;00:41:05.1409244;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1735.8637532, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.663189383177528, Elapsed = 00:28:55.8838000, TimeTotal = 06:17:32.2367281, Remaining = 05:48:36.3529281, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:55.8838000, HeatingEstimate = 00:41:04.1362468, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.663189383177528;StartedAtUtc;00:28:55.8838000;06:17:32.2367281;05:48:36.3529281;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:55.8838000;00:41:04.1362468;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1736.864401, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.6676067193883926, Elapsed = 00:28:56.8844236, TimeTotal = 06:17:32.2367039, Remaining = 05:48:35.3522803, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:56.8844236, HeatingEstimate = 00:41:03.1355990, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.6676067193883926;StartedAtUtc;00:28:56.8844236;06:17:32.2367039;05:48:35.3522803;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:56.8844236;00:41:03.1355990;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1737.8635227, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.67201739189162, Elapsed = 00:28:57.8835391, TimeTotal = 06:17:32.2366977, Remaining = 05:48:34.3531586, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:57.8835391, HeatingEstimate = 00:41:02.1364773, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.67201739189162;StartedAtUtc;00:28:57.8835391;06:17:32.2366977;05:48:34.3531586;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:57.8835391;00:41:02.1364773;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1738.8637257, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.676433187164222, Elapsed = 00:28:58.8838216, TimeTotal = 06:17:32.2367772, Remaining = 05:48:33.3529556, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:58.8838216, HeatingEstimate = 00:41:01.1362743, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.676433187164222;StartedAtUtc;00:28:58.8838216;06:17:32.2367772;05:48:33.3529556;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:58.8838216;00:41:01.1362743;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1739.8660971, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.680858129080878, Elapsed = 00:28:59.8861680, TimeTotal = 06:17:32.2367522, Remaining = 05:48:32.3505842, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:59.8861680, HeatingEstimate = 00:41:00.1339029, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.680858129080878;StartedAtUtc;00:28:59.8861680;06:17:32.2367522;05:48:32.3505842;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:28:59.8861680;00:41:00.1339029;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1740.8677238, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.685279754538583, Elapsed = 00:29:00.8877626, TimeTotal = 06:17:32.2367201, Remaining = 05:48:31.3489575, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:00.8877626, HeatingEstimate = 00:40:59.1322762, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.685279754538583;StartedAtUtc;00:29:00.8877626;06:17:32.2367201;05:48:31.3489575;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:00.8877626;00:40:59.1322762;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2002858. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:30:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:30:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:30:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1741.8678397, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.689694741032069, Elapsed = 00:29:01.8878539, TimeTotal = 06:17:32.2366955, Remaining = 05:48:30.3488416, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:01.8878539, HeatingEstimate = 00:40:58.1321603, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.689694741032069;StartedAtUtc;00:29:01.8878539;06:17:32.2366955;05:48:30.3488416;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:01.8878539;00:40:58.1321603;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1742.8691608, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.694115152298819, Elapsed = 00:29:02.8891760, TimeTotal = 06:17:32.2366965, Remaining = 05:48:29.3475205, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:02.8891760, HeatingEstimate = 00:40:57.1308392, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.694115152298819;StartedAtUtc;00:29:02.8891760;06:17:32.2366965;05:48:29.3475205;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:02.8891760;00:40:57.1308392;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] -06/14/2026 18:30:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1743.8744867, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.698553237758393, Elapsed = 00:29:03.8945016, TimeTotal = 06:17:32.2366962, Remaining = 05:48:28.3421946, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:03.8945016, HeatingEstimate = 00:40:56.1255133, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.698553237758393;StartedAtUtc;00:29:03.8945016;06:17:32.2366962;05:48:28.3421946;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:03.8945016;00:40:56.1255133;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:30:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1744.8763501, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.702976129021093, Elapsed = 00:29:04.8963871, TimeTotal = 06:17:32.2367183, Remaining = 05:48:27.3403312, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:04.8963871, HeatingEstimate = 00:40:55.1236499, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.702976129021093;StartedAtUtc;00:29:04.8963871;06:17:32.2367183;05:48:27.3403312;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:04.8963871;00:40:55.1236499;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1745.8773107, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.707395097948831, Elapsed = 00:29:05.8973853, TimeTotal = 06:17:32.2367559, Remaining = 05:48:26.3393706, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:05.8973853, HeatingEstimate = 00:40:54.1226893, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.707395097948831;StartedAtUtc;00:29:05.8973853;06:17:32.2367559;05:48:26.3393706;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:05.8973853;00:40:54.1226893;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1746.8785611, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.711816102364502, Elapsed = 00:29:06.8988589, TimeTotal = 06:17:32.2369791, Remaining = 05:48:25.3381202, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:06.8988589, HeatingEstimate = 00:40:53.1214389, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.711816102364502;StartedAtUtc;00:29:06.8988589;06:17:32.2369791;05:48:25.3381202;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:06.8988589;00:40:53.1214389;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1747.8837264, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.7162523690482185, Elapsed = 00:29:07.9037515, TimeTotal = 06:17:32.2367064, Remaining = 05:48:24.3329549, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:07.9037515, HeatingEstimate = 00:40:52.1162736, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.7162523690482185;StartedAtUtc;00:29:07.9037515;06:17:32.2367064;05:48:24.3329549;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:07.9037515;00:40:52.1162736;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] -06/14/2026 18:30:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1748.885761, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.720675881226118, Elapsed = 00:29:08.9057751, TimeTotal = 06:17:32.2366954, Remaining = 05:48:23.3309203, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:08.9057751, HeatingEstimate = 00:40:51.1142390, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.720675881226118;StartedAtUtc;00:29:08.9057751;06:17:32.2366954;05:48:23.3309203;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:08.9057751;00:40:51.1142390;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1749.8922628, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.725119173671937, Elapsed = 00:29:09.9122805, TimeTotal = 06:17:32.2366990, Remaining = 05:48:22.3244185, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:09.9122805, HeatingEstimate = 00:40:50.1077372, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.725119173671937;StartedAtUtc;00:29:09.9122805;06:17:32.2366990;05:48:22.3244185;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:09.9122805;00:40:50.1077372;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] -06/14/2026 18:30:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1750.8916959, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.729531347571704, Elapsed = 00:29:10.9117385, TimeTotal = 06:17:32.2367239, Remaining = 05:48:21.3249854, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:10.9117385, HeatingEstimate = 00:40:49.1083041, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.729531347571704;StartedAtUtc;00:29:10.9117385;06:17:32.2367239;05:48:21.3249854;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:10.9117385;00:40:49.1083041;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1751.8906648, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.733941259190039, Elapsed = 00:29:11.9106800, TimeTotal = 06:17:32.2366965, Remaining = 05:48:20.3260165, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:11.9106800, HeatingEstimate = 00:40:48.1093352, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.733941259190039;StartedAtUtc;00:29:11.9106800;06:17:32.2366965;05:48:20.3260165;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:11.9106800;00:40:48.1093352;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:30:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167.25 [HeaterCheck.cs@67] -06/14/2026 18:30:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1752.890786, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.738356370147614, Elapsed = 00:29:12.9108014, TimeTotal = 06:17:32.2366967, Remaining = 05:48:19.3258953, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:12.9108014, HeatingEstimate = 00:40:47.1092140, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.738356370147614;StartedAtUtc;00:29:12.9108014;06:17:32.2366967;05:48:19.3258953;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:12.9108014;00:40:47.1092140;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1753.8916846, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.742775282395529, Elapsed = 00:29:13.9117909, TimeTotal = 06:17:32.2367876, Remaining = 05:48:18.3249967, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:13.9117909, HeatingEstimate = 00:40:46.1083154, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.742775282395529;StartedAtUtc;00:29:13.9117909;06:17:32.2367876;05:48:18.3249967;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:13.9117909;00:40:46.1083154;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 59.75 [HeaterCheck.cs@67] -06/14/2026 18:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1754.8904576, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.7471840640779295, Elapsed = 00:29:14.9104714, TimeTotal = 06:17:32.2366951, Remaining = 05:48:17.3262237, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:14.9104714, HeatingEstimate = 00:40:45.1095424, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.7471840640779295;StartedAtUtc;00:29:14.9104714;06:17:32.2366951;05:48:17.3262237;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:14.9104714;00:40:45.1095424;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.75 with temperature 60 [HeaterCheck.cs@67] -06/14/2026 18:30:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1755.8915422, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.751603432516921, Elapsed = 00:29:15.9115573, TimeTotal = 06:17:32.2366964, Remaining = 05:48:16.3251391, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:15.9115573, HeatingEstimate = 00:40:44.1084578, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.751603432516921;StartedAtUtc;00:29:15.9115573;06:17:32.2366964;05:48:16.3251391;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:15.9115573;00:40:44.1084578;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1756.8908436, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.7560149203335165, Elapsed = 00:29:16.9108579, TimeTotal = 06:17:32.2366956, Remaining = 05:48:15.3258377, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:16.9108579, HeatingEstimate = 00:40:43.1091564, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.7560149203335165;StartedAtUtc;00:29:16.9108579;06:17:32.2366956;05:48:15.3258377;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:16.9108579;00:40:43.1091564;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=65.75,powderChamber1=65.75,powderChamber2=65.75,powderChamber3=65.75,powderChamber4=65.75 [ControlledHeating.cs@169] -06/14/2026 18:30:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1757.8933181, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.760440429069014, Elapsed = 00:29:17.9133348, TimeTotal = 06:17:32.2366980, Remaining = 05:48:14.3233632, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:03.1764331, WeightTotalEstimate = 01:11:03.1764331, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:09.7166813, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:17.9133348, HeatingEstimate = 00:40:42.1066819, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:30.2781243, WeightEstimate = 01:11:03.1764331 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:18:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.760440429069014;StartedAtUtc;00:29:17.9133348;06:17:32.2366980;05:48:14.3233632;False;232;0;0;00:00:00;01:11:03.1764331;01:11:03.1764331;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:09.7166813;00:00:00;02:00:00;00:29:17.9133348;00:40:42.1066819;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:30.2781243 [PrintingService.cs@1918] -06/14/2026 18:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268659, estimate=36.980672150358 for layer 61, Z=6.101 [PrintingService.cs@1524] -06/14/2026 18:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 44, island count 5 [PrintingService.cs@1569] -06/14/2026 18:30:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 62, start=0, count=232, Z=6.201 [PrintingService.cs@1518] -06/14/2026 18:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1758.890742, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.761796952618062, Elapsed = 00:29:18.9107612, TimeTotal = 06:17:41.1282405, Remaining = 05:48:22.2174793, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:18.9107612, HeatingEstimate = 00:40:41.1092580, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.761796952618062;StartedAtUtc;00:29:18.9107612;06:17:41.1282405;05:48:22.2174793;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:18.9107612;00:40:41.1092580;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1759.8919063, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.766214939953535, Elapsed = 00:29:19.9119271, TimeTotal = 06:17:41.1282421, Remaining = 05:48:21.2163150, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:19.9119271, HeatingEstimate = 00:40:40.1080937, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.766214939953535;StartedAtUtc;00:29:19.9119271;06:17:41.1282421;05:48:21.2163150;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:19.9119271;00:40:40.1080937;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=168.20065307617188, Elapsed=00:00:30.1987791 [ControlledHeating.cs@486] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 168.20065307617188 after 00:00:30.1988596 [ControlledHeating.cs@493] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2163605. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634288. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2821481. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2927415. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:30:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 279633074563 (279633074563 @ 0) for mcu = 2315.715950 [14/06/2026 15:33:28] (2330.2756213583334 sec) to 282045162580 (from now=281925162580, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 279633074563 (279633074563 @ 0) for mcu = 2315.715950 [14/06/2026 15:33:28] (2330.2756213583334 sec) to 282045162580 (from external timestamp, flags=None, requested=282045162580 (282045162580 @ 0) for mcu = 2335.816903 [14/06/2026 15:33:48] (2350.376354833333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 279633074563 (279633074563 @ 0) for mcu = 2315.715950 [14/06/2026 15:33:28] (2330.2756213583334 sec) to 282045162580 (from external timestamp, flags=None, requested=282045162580 (282045162580 @ 0) for mcu = 2335.816903 [14/06/2026 15:33:48] (2350.376354833333 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1760.891047, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.770623966527866, Elapsed = 00:29:20.9110618, TimeTotal = 06:17:41.1282361, Remaining = 05:48:20.2171743, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:20.9110618, HeatingEstimate = 00:40:39.1089530, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.770623966527866;StartedAtUtc;00:29:20.9110618;06:17:41.1282361;05:48:20.2171743;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:20.9110618;00:40:39.1089530;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1761.8910257, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.775036732171328, Elapsed = 00:29:21.9110446, TimeTotal = 06:17:41.1282402, Remaining = 05:48:19.2171956, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:21.9110446, HeatingEstimate = 00:40:38.1089743, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.775036732171328;StartedAtUtc;00:29:21.9110446;06:17:41.1282402;05:48:19.2171956;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:21.9110446;00:40:38.1089743;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1762.8946442, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.779465750540732, Elapsed = 00:29:22.9147141, TimeTotal = 06:17:41.1282912, Remaining = 05:48:18.2135771, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:22.9147141, HeatingEstimate = 00:40:37.1053558, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.779465750540732;StartedAtUtc;00:29:22.9147141;06:17:41.1282912;05:48:18.2135771;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:22.9147141;00:40:37.1053558;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1763.8968457, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.783888087388982, Elapsed = 00:29:23.9168613, TimeTotal = 06:17:41.1282369, Remaining = 05:48:17.2113756, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:23.9168613, HeatingEstimate = 00:40:36.1031543, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.783888087388982;StartedAtUtc;00:29:23.9168613;06:17:41.1282369;05:48:17.2113756;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:23.9168613;00:40:36.1031543;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1764.8957321, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.788296559430536, Elapsed = 00:29:24.9158812, TimeTotal = 06:17:41.1283704, Remaining = 05:48:16.2124892, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:24.9158812, HeatingEstimate = 00:40:35.1042679, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.788296559430536;StartedAtUtc;00:29:24.9158812;06:17:41.1283704;05:48:16.2124892;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:24.9158812;00:40:35.1042679;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=55.25 that are outside of set tolerance 10 for current step target 65.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:30:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1765.8975907, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.792717058010538, Elapsed = 00:29:25.9176056, TimeTotal = 06:17:41.1282362, Remaining = 05:48:15.2106306, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:25.9176056, HeatingEstimate = 00:40:34.1024093, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.792717058010538;StartedAtUtc;00:29:25.9176056;06:17:41.1282362;05:48:15.2106306;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:25.9176056;00:40:34.1024093;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1766.9012847, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.7971461950865475, Elapsed = 00:29:26.9212979, TimeTotal = 06:17:41.1282345, Remaining = 05:48:14.2069366, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:26.9212979, HeatingEstimate = 00:40:33.0987153, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.7971461950865475;StartedAtUtc;00:29:26.9212979;06:17:41.1282345;05:48:14.2069366;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:26.9212979;00:40:33.0987153;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1767.9010041, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.801557806710771, Elapsed = 00:29:27.9210190, TimeTotal = 06:17:41.1282362, Remaining = 05:48:13.2072172, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:27.9210190, HeatingEstimate = 00:40:32.0989959, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.801557806710771;StartedAtUtc;00:29:27.9210190;06:17:41.1282362;05:48:13.2072172;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:27.9210190;00:40:32.0989959;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1768.8999247, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.805965888066494, Elapsed = 00:29:28.9199400, TimeTotal = 06:17:41.1282366, Remaining = 05:48:12.2082966, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:28.9199400, HeatingEstimate = 00:40:31.1000753, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.805965888066494;StartedAtUtc;00:29:28.9199400;06:17:41.1282366;05:48:12.2082966;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:28.9199400;00:40:31.1000753;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1769.9000762, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.810379837299681, Elapsed = 00:29:29.9201991, TimeTotal = 06:17:41.1283442, Remaining = 05:48:11.2081451, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:29.9201991, HeatingEstimate = 00:40:30.0999238, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.810379837299681;StartedAtUtc;00:29:29.9201991;06:17:41.1283442;05:48:11.2081451;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:29.9201991;00:40:30.0999238;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 167 [HeaterCheck.cs@67] -06/14/2026 18:30:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1770.9087109, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.81483036073393, Elapsed = 00:29:30.9287298, TimeTotal = 06:17:41.1282402, Remaining = 05:48:10.1995104, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:30.9287298, HeatingEstimate = 00:40:29.0912891, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.81483036073393;StartedAtUtc;00:29:30.9287298;06:17:41.1282402;05:48:10.1995104;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:30.9287298;00:40:29.0912891;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:51 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (851 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:30:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:30:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1771.9280011, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.819328334815744, Elapsed = 00:29:31.9480216, TimeTotal = 06:17:41.1282418, Remaining = 05:48:09.1802202, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:31.9480216, HeatingEstimate = 00:40:28.0719989, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.819328334815744;StartedAtUtc;00:29:31.9480216;06:17:41.1282418;05:48:09.1802202;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:31.9480216;00:40:28.0719989;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2956516. SinceCollect=00:01:00.6965711. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:30:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4624, gen1=1277, gen2=59, LatencyMode=Interactive, FreeMemory=5859246080, Live=443083200, HeapSizeBytes=509729088, FragmentedBytes=67228760, TotalCommittedBytes=519929856, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:30:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:30:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:30:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1772.9292615, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.823746717747955, Elapsed = 00:29:32.9492766, TimeTotal = 06:17:41.1282364, Remaining = 05:48:08.1789598, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:32.9492766, HeatingEstimate = 00:40:27.0707385, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.823746717747955;StartedAtUtc;00:29:32.9492766;06:17:41.1282364;05:48:08.1789598;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:32.9492766;00:40:27.0707385;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1773.9266539, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.828148063531446, Elapsed = 00:29:33.9466714, TimeTotal = 06:17:41.1282388, Remaining = 05:48:07.1815674, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:33.9466714, HeatingEstimate = 00:40:26.0733461, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.828148063531446;StartedAtUtc;00:29:33.9466714;06:17:41.1282388;05:48:07.1815674;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:33.9466714;00:40:26.0733461;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1774.9267188, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.832561387287866, Elapsed = 00:29:34.9467841, TimeTotal = 06:17:41.1282866, Remaining = 05:48:06.1815025, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:34.9467841, HeatingEstimate = 00:40:25.0732812, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.832561387287866;StartedAtUtc;00:29:34.9467841;06:17:41.1282866;05:48:06.1815025;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:34.9467841;00:40:25.0732812;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1775.9278221, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.836978889874439, Elapsed = 00:29:35.9478360, TimeTotal = 06:17:41.1282352, Remaining = 05:48:05.1803992, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:35.9478360, HeatingEstimate = 00:40:24.0721779, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.836978889874439;StartedAtUtc;00:29:35.9478360;06:17:41.1282352;05:48:05.1803992;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:35.9478360;00:40:24.0721779;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1776.9311028, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.8414062210199535, Elapsed = 00:29:36.9511194, TimeTotal = 06:17:41.1282379, Remaining = 05:48:04.1771185, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:36.9511194, HeatingEstimate = 00:40:23.0688972, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.8414062210199535;StartedAtUtc;00:29:36.9511194;06:17:41.1282379;05:48:04.1771185;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:36.9511194;00:40:23.0688972;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1777.9319929, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.845822977202356, Elapsed = 00:29:37.9520059, TimeTotal = 06:17:41.1282343, Remaining = 05:48:03.1762284, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:37.9520059, HeatingEstimate = 00:40:22.0680071, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.845822977202356;StartedAtUtc;00:29:37.9520059;06:17:41.1282343;05:48:03.1762284;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:37.9520059;00:40:22.0680071;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1778.9320868, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.850236281690254, Elapsed = 00:29:38.9521114, TimeTotal = 06:17:41.1282459, Remaining = 05:48:02.1761345, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:38.9521114, HeatingEstimate = 00:40:21.0679132, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.850236281690254;StartedAtUtc;00:29:38.9521114;06:17:41.1282459;05:48:02.1761345;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:38.9521114;00:40:21.0679132;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:30:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 172 with temperature 169.5 [HeaterCheck.cs@67] -06/14/2026 18:31:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1779.9319159, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.854648321283178, Elapsed = 00:29:39.9519284, TimeTotal = 06:17:41.1282338, Remaining = 05:48:01.1763054, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:39.9519284, HeatingEstimate = 00:40:20.0680841, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.854648321283178;StartedAtUtc;00:29:39.9519284;06:17:41.1282338;05:48:01.1763054;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:39.9519284;00:40:20.0680841;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1780.9312811, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.859058442656279, Elapsed = 00:29:40.9513132, TimeTotal = 06:17:41.1282534, Remaining = 05:48:00.1769402, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:40.9513132, HeatingEstimate = 00:40:19.0687189, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.859058442656279;StartedAtUtc;00:29:40.9513132;06:17:41.1282534;05:48:00.1769402;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:40.9513132;00:40:19.0687189;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1781.93069, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.8634686007347145, Elapsed = 00:29:41.9507033, TimeTotal = 06:17:41.1282346, Remaining = 05:47:59.1775313, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:41.9507033, HeatingEstimate = 00:40:18.0693100, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.8634686007347145;StartedAtUtc;00:29:41.9507033;06:17:41.1282346;05:47:59.1775313;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:41.9507033;00:40:18.0693100;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 65.75 with temperature 60.75 [HeaterCheck.cs@67] -06/14/2026 18:31:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1782.9314977, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.867885009972153, Elapsed = 00:29:42.9515115, TimeTotal = 06:17:41.1282351, Remaining = 05:47:58.1767236, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:42.9515115, HeatingEstimate = 00:40:17.0685023, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.867885009972153;StartedAtUtc;00:29:42.9515115;06:17:41.1282351;05:47:58.1767236;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:42.9515115;00:40:17.0685023;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1783.9305046, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.872294393386453, Elapsed = 00:29:43.9507454, TimeTotal = 06:17:41.1284621, Remaining = 05:47:57.1777167, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:43.9507454, HeatingEstimate = 00:40:16.0694954, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.872294393386453;StartedAtUtc;00:29:43.9507454;06:17:41.1284621;05:47:57.1777167;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:43.9507454;00:40:16.0694954;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1784.9314394, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.876710794315847, Elapsed = 00:29:44.9515407, TimeTotal = 06:17:41.1283226, Remaining = 05:47:56.1767819, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:44.9515407, HeatingEstimate = 00:40:15.0685606, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.876710794315847;StartedAtUtc;00:29:44.9515407;06:17:41.1283226;05:47:56.1767819;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:44.9515407;00:40:15.0685606;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=66.75,powderChamber1=66.75,powderChamber2=66.75,powderChamber3=66.75,powderChamber4=66.75 [ControlledHeating.cs@169] -06/14/2026 18:31:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1785.9308767, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.881120798856984, Elapsed = 00:29:45.9508906, TimeTotal = 06:17:41.1282352, Remaining = 05:47:55.1773446, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:45.9508906, HeatingEstimate = 00:40:14.0691233, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.881120798856984;StartedAtUtc;00:29:45.9508906;06:17:41.1282352;05:47:55.1773446;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:45.9508906;00:40:14.0691233;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1786.9314935, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.8855363579589515, Elapsed = 00:29:46.9515060, TimeTotal = 06:17:41.1282338, Remaining = 05:47:54.1767278, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:46.9515060, HeatingEstimate = 00:40:13.0685065, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.8855363579589515;StartedAtUtc;00:29:46.9515060;06:17:41.1282338;05:47:54.1767278;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:46.9515060;00:40:13.0685065;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1787.9310863, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.88994742432418, Elapsed = 00:29:47.9511038, TimeTotal = 06:17:41.1282388, Remaining = 05:47:53.1771350, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:47.9511038, HeatingEstimate = 00:40:12.0689137, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.88994742432418;StartedAtUtc;00:29:47.9511038;06:17:41.1282388;05:47:53.1771350;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:47.9511038;00:40:12.0689137;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1788.930996, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.894359852943546, Elapsed = 00:29:48.9510096, TimeTotal = 06:17:41.1282349, Remaining = 05:47:52.1772253, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:48.9510096, HeatingEstimate = 00:40:11.0690040, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.894359852943546;StartedAtUtc;00:29:48.9510096;06:17:41.1282349;05:47:52.1772253;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:48.9510096;00:40:11.0690040;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1789.9312222, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.898773704647061, Elapsed = 00:29:49.9512384, TimeTotal = 06:17:41.1282375, Remaining = 05:47:51.1769991, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:49.9512384, HeatingEstimate = 00:40:10.0687778, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.898773704647061;StartedAtUtc;00:29:49.9512384;06:17:41.1282375;05:47:51.1769991;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:49.9512384;00:40:10.0687778;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1790.9308662, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.903184978251404, Elapsed = 00:29:50.9508828, TimeTotal = 06:17:41.1282379, Remaining = 05:47:50.1773551, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:50.9508828, HeatingEstimate = 00:40:09.0691338, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.903184978251404;StartedAtUtc;00:29:50.9508828;06:17:41.1282379;05:47:50.1773551;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:50.9508828;00:40:09.0691338;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=168.0701141357422, Elapsed=00:00:30.4920357 [ControlledHeating.cs@486] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 168.0701141357422 after 00:00:30.4921003 [ControlledHeating.cs@493] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0134812. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632086. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0791475. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0897013. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:31:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 283256683808 (283256683808 @ 0) for mcu = 2345.913085 [14/06/2026 15:33:58] (2360.4723650666665 sec) to 285704347438 (from now=285584347438, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 283256683808 (283256683808 @ 0) for mcu = 2345.913085 [14/06/2026 15:33:58] (2360.4723650666665 sec) to 285704347438 (from external timestamp, flags=None, requested=285704347438 (285704347438 @ 0) for mcu = 2366.310528 [14/06/2026 15:34:19] (2380.8695619833334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 283256683808 (283256683808 @ 0) for mcu = 2345.913085 [14/06/2026 15:33:58] (2360.4723650666665 sec) to 285704347438 (from external timestamp, flags=None, requested=285704347438 (285704347438 @ 0) for mcu = 2366.310528 [14/06/2026 15:34:19] (2380.8695619833334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:31:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1791.9312461, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.90759948748143, Elapsed = 00:29:51.9512602, TimeTotal = 06:17:41.1282354, Remaining = 05:47:49.1769752, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:51.9512602, HeatingEstimate = 00:40:08.0687539, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.90759948748143;StartedAtUtc;00:29:51.9512602;06:17:41.1282354;05:47:49.1769752;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:51.9512602;00:40:08.0687539;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:12 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=55.75 that are outside of set tolerance 10 for current step target 66.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1792.9311298, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.912011817219003, Elapsed = 00:29:52.9511439, TimeTotal = 06:17:41.1282354, Remaining = 05:47:48.1770915, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:12.0679731, WeightTotalEstimate = 01:11:12.0679731, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:18.6082213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:52.9511439, HeatingEstimate = 00:40:07.0688702, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:39.1696643, WeightEstimate = 01:11:12.0679731 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.912011817219003;StartedAtUtc;00:29:52.9511439;06:17:41.1282354;05:47:48.1770915;False;232;0;0;00:00:00;01:11:12.0679731;01:11:12.0679731;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:18.6082213;00:00:00;02:00:00;00:29:52.9511439;00:40:07.0688702;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:39.1696643 [PrintingService.cs@1918] -06/14/2026 18:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203033, estimate=38.02273891122186 for layer 62, Z=6.201 [PrintingService.cs@1524] -06/14/2026 18:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 45, island count 5 [PrintingService.cs@1569] -06/14/2026 18:31:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 63, start=0, count=232, Z=6.301 [PrintingService.cs@1518] -06/14/2026 18:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:31:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1793.9313951, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.91243442539316, Elapsed = 00:29:53.9514449, TimeTotal = 06:17:52.5600296, Remaining = 05:47:58.6085847, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:53.9514449, HeatingEstimate = 00:40:06.0686049, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.91243442539316;StartedAtUtc;00:29:53.9514449;06:17:52.5600296;05:47:58.6085847;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:29:53.9514449;00:40:06.0686049;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0882045 ~ 5.99 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:31:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1794.9363355, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.916867032965953, Elapsed = 00:29:54.9564344, TimeTotal = 06:17:52.5600787, Remaining = 05:47:57.6036443, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:54.9564344, HeatingEstimate = 00:40:05.0636645, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.916867032965953;StartedAtUtc;00:29:54.9564344;06:17:52.5600787;05:47:57.6036443;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:29:54.9564344;00:40:05.0636645;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1795.9390395, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.921289235656448, Elapsed = 00:29:55.9590543, TimeTotal = 06:17:52.5599946, Remaining = 05:47:56.6009403, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:55.9590543, HeatingEstimate = 00:40:04.0609605, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.921289235656448;StartedAtUtc;00:29:55.9590543;06:17:52.5599946;05:47:56.6009403;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:29:55.9590543;00:40:04.0609605;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1796.942854, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.925716799736217, Elapsed = 00:29:56.9628988, TimeTotal = 06:17:52.5600246, Remaining = 05:47:55.5971258, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:56.9628988, HeatingEstimate = 00:40:03.0571460, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.925716799736217;StartedAtUtc;00:29:56.9628988;06:17:52.5600246;05:47:55.5971258;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:29:56.9628988;00:40:03.0571460;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1797.9450553, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.9301370463650915, Elapsed = 00:29:57.9650803, TimeTotal = 06:17:52.5600048, Remaining = 05:47:54.5949245, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:57.9650803, HeatingEstimate = 00:40:02.0549447, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.9301370463650915;StartedAtUtc;00:29:57.9650803;06:17:52.5600048;05:47:54.5949245;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:29:57.9650803;00:40:02.0549447;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1798.9511332, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.934574440337141, Elapsed = 00:29:58.9711505, TimeTotal = 06:17:52.5599971, Remaining = 05:47:53.5888466, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:58.9711505, HeatingEstimate = 00:40:01.0488668, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.934574440337141;StartedAtUtc;00:29:58.9711505;06:17:52.5599971;05:47:53.5888466;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:29:58.9711505;00:40:01.0488668;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1799.9522239, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.938989957867977, Elapsed = 00:29:59.9722631, TimeTotal = 06:17:52.5600190, Remaining = 05:47:52.5877559, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:59.9722631, HeatingEstimate = 00:40:00.0477761, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.938989957867977;StartedAtUtc;00:29:59.9722631;06:17:52.5600190;05:47:52.5877559;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:29:59.9722631;00:40:00.0477761;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1800.9507665, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.9433941250374245, Elapsed = 00:30:00.9708001, TimeTotal = 06:17:52.5600134, Remaining = 05:47:51.5892133, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:00.9708001, HeatingEstimate = 00:39:59.0492335, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.9433941250374245;StartedAtUtc;00:30:00.9708001;06:17:52.5600134;05:47:51.5892133;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:00.9708001;00:39:59.0492335;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1801.9509596, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.947805733930781, Elapsed = 00:30:01.9710275, TimeTotal = 06:17:52.5600477, Remaining = 05:47:50.5890202, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:01.9710275, HeatingEstimate = 00:39:58.0490404, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.947805733930781;StartedAtUtc;00:30:01.9710275;06:17:52.5600477;05:47:50.5890202;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:01.9710275;00:39:58.0490404;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1884723. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:31:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:31:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:31:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1802.9514491, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.952220612661934, Elapsed = 00:30:02.9720347, TimeTotal = 06:17:52.5605654, Remaining = 05:47:49.5885307, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:02.9720347, HeatingEstimate = 00:39:57.0485509, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.952220612661934;StartedAtUtc;00:30:02.9720347;06:17:52.5605654;05:47:49.5885307;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:02.9720347;00:39:57.0485509;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1803.954656, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.956643070226753, Elapsed = 00:30:03.9746739, TimeTotal = 06:17:52.5599977, Remaining = 05:47:48.5853238, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:03.9746739, HeatingEstimate = 00:39:56.0453440, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.956643070226753;StartedAtUtc;00:30:03.9746739;06:17:52.5599977;05:47:48.5853238;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:03.9746739;00:39:56.0453440;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=67.75,powderChamber1=67.75,powderChamber2=67.75,powderChamber3=67.75,powderChamber4=67.75 [ControlledHeating.cs@169] -06/14/2026 18:31:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1804.9563725, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.961061246819663, Elapsed = 00:30:04.9763874, TimeTotal = 06:17:52.5599947, Remaining = 05:47:47.5836073, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:04.9763874, HeatingEstimate = 00:39:55.0436275, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.961061246819663;StartedAtUtc;00:30:04.9763874;06:17:52.5599947;05:47:47.5836073;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:04.9763874;00:39:55.0436275;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1805.9562248, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.9654712137235695, Elapsed = 00:30:05.9762398, TimeTotal = 06:17:52.5599948, Remaining = 05:47:46.5837550, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:05.9762398, HeatingEstimate = 00:39:54.0437752, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.9654712137235695;StartedAtUtc;00:30:05.9762398;06:17:52.5599948;05:47:46.5837550;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:05.9762398;00:39:54.0437752;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1806.9553478, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.969877976952879, Elapsed = 00:30:06.9753661, TimeTotal = 06:17:52.5599981, Remaining = 05:47:45.5846320, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:06.9753661, HeatingEstimate = 00:39:53.0446522, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.969877976952879;StartedAtUtc;00:30:06.9753661;06:17:52.5599981;05:47:45.5846320;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:06.9753661;00:39:53.0446522;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1807.9552969, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.974288380951158, Elapsed = 00:30:07.9753178, TimeTotal = 06:17:52.5600007, Remaining = 05:47:44.5846829, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:07.9753178, HeatingEstimate = 00:39:52.0447031, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.974288380951158;StartedAtUtc;00:30:07.9753178;06:17:52.5600007;05:47:44.5846829;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:07.9753178;00:39:52.0447031;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1808.9547404, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.978696529370133, Elapsed = 00:30:08.9747576, TimeTotal = 06:17:52.5599970, Remaining = 05:47:43.5852394, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:08.9747576, HeatingEstimate = 00:39:51.0452596, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.978696529370133;StartedAtUtc;00:30:08.9747576;06:17:52.5599970;05:47:43.5852394;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:08.9747576;00:39:51.0452596;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1809.9570307, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.983117248548363, Elapsed = 00:30:09.9770478, TimeTotal = 06:17:52.5599969, Remaining = 05:47:42.5829491, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:09.9770478, HeatingEstimate = 00:39:50.0429693, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.983117248548363;StartedAtUtc;00:30:09.9770478;06:17:52.5599969;05:47:42.5829491;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:09.9770478;00:39:50.0429693;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1810.957179, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.987528520994655, Elapsed = 00:30:10.9771962, TimeTotal = 06:17:52.5599970, Remaining = 05:47:41.5828008, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:10.9771962, HeatingEstimate = 00:39:49.0428210, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.987528520994655;StartedAtUtc;00:30:10.9771962;06:17:52.5599970;05:47:41.5828008;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:10.9771962;00:39:49.0428210;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1811.9564332, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.991936316591683, Elapsed = 00:30:11.9765655, TimeTotal = 06:17:52.5601121, Remaining = 05:47:40.5835466, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:11.9765655, HeatingEstimate = 00:39:48.0435668, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.991936316591683;StartedAtUtc;00:30:11.9765655;06:17:52.5601121;05:47:40.5835466;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:11.9765655;00:39:48.0435668;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=68.75,powderChamber1=68.75,powderChamber2=68.75,powderChamber3=68.75,powderChamber4=68.75 [ControlledHeating.cs@169] -06/14/2026 18:31:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1812.9574851, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 7.996351094396828, Elapsed = 00:30:12.9774992, TimeTotal = 06:17:52.5599939, Remaining = 05:47:39.5824947, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:12.9774992, HeatingEstimate = 00:39:47.0425149, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.996351094396828;StartedAtUtc;00:30:12.9774992;06:17:52.5599939;05:47:39.5824947;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:12.9774992;00:39:47.0425149;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1813.957141, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.0007602879775, Elapsed = 00:30:13.9771781, TimeTotal = 06:17:52.5600169, Remaining = 05:47:38.5828388, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:13.9771781, HeatingEstimate = 00:39:46.0428590, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.0007602879775;StartedAtUtc;00:30:13.9771781;06:17:52.5600169;05:47:38.5828388;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:13.9771781;00:39:46.0428590;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1814.9662467, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.005210995459034, Elapsed = 00:30:14.9862660, TimeTotal = 06:17:52.5599991, Remaining = 05:47:37.5737331, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:14.9862660, HeatingEstimate = 00:39:45.0337533, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.005210995459034;StartedAtUtc;00:30:14.9862660;06:17:52.5599991;05:47:37.5737331;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:14.9862660;00:39:45.0337533;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1815.9690622, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.00963401567561, Elapsed = 00:30:15.9890776, TimeTotal = 06:17:52.5599952, Remaining = 05:47:36.5709176, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:15.9890776, HeatingEstimate = 00:39:44.0309378, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.00963401567561;StartedAtUtc;00:30:15.9890776;06:17:52.5599952;05:47:36.5709176;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:15.9890776;00:39:44.0309378;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1816.9688311, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.014043623659397, Elapsed = 00:30:16.9888488, TimeTotal = 06:17:52.5599975, Remaining = 05:47:35.5711487, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:16.9888488, HeatingEstimate = 00:39:43.0311689, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.014043623659397;StartedAtUtc;00:30:16.9888488;06:17:52.5599975;05:47:35.5711487;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:16.9888488;00:39:43.0311689;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1817.9679555, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.018450374799682, Elapsed = 00:30:17.9879720, TimeTotal = 06:17:52.5599963, Remaining = 05:47:34.5720243, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:17.9879720, HeatingEstimate = 00:39:42.0320445, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.018450374799682;StartedAtUtc;00:30:17.9879720;06:17:52.5599963;05:47:34.5720243;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:17.9879720;00:39:42.0320445;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1818.9682729, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.022862504236658, Elapsed = 00:30:18.9883169, TimeTotal = 06:17:52.5600238, Remaining = 05:47:33.5717069, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:18.9883169, HeatingEstimate = 00:39:41.0317271, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.022862504236658;StartedAtUtc;00:30:18.9883169;06:17:52.5600238;05:47:33.5717069;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:18.9883169;00:39:41.0317271;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=57 that are outside of set tolerance 10 for current step target 68.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:31:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1819.9668507, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.027267379589565, Elapsed = 00:30:19.9870254, TimeTotal = 06:17:52.5601545, Remaining = 05:47:32.5731291, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:19.9870254, HeatingEstimate = 00:39:40.0331493, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.027267379589565;StartedAtUtc;00:30:19.9870254;06:17:52.5601545;05:47:32.5731291;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:19.9870254;00:39:40.0331493;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1820.9677043, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.031681155575054, Elapsed = 00:30:20.9877294, TimeTotal = 06:17:52.5600049, Remaining = 05:47:31.5722755, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:20.9877294, HeatingEstimate = 00:39:39.0322957, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.031681155575054;StartedAtUtc;00:30:20.9877294;06:17:52.5600049;05:47:31.5722755;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:20.9877294;00:39:39.0322957;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.41580200195312, Elapsed=00:00:30.1952404 [ControlledHeating.cs@486] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.41580200195312 after 00:00:30.1964209 [ControlledHeating.cs@493] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2080902. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633469. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2745902. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2852372. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:31:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 286915868666 (286915868666 @ 0) for mcu = 2376.406727 [14/06/2026 15:34:29] (2390.9655722166667 sec) to 289327757125 (from now=289207757125, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 286915868666 (286915868666 @ 0) for mcu = 2376.406727 [14/06/2026 15:34:29] (2390.9655722166667 sec) to 289327757125 (from external timestamp, flags=None, requested=289327757125 (289327757125 @ 0) for mcu = 2396.506061 [14/06/2026 15:34:49] (2411.0646427083334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 286915868666 (286915868666 @ 0) for mcu = 2376.406727 [14/06/2026 15:34:29] (2390.9655722166667 sec) to 289327757125 (from external timestamp, flags=None, requested=289327757125 (289327757125 @ 0) for mcu = 2396.506061 [14/06/2026 15:34:49] (2411.0646427083334 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:31:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1821.9676249, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.0360914289949, Elapsed = 00:30:21.9876514, TimeTotal = 06:17:52.5600063, Remaining = 05:47:30.5723549, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:21.9876514, HeatingEstimate = 00:39:38.0323751, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.0360914289949;StartedAtUtc;00:30:21.9876514;06:17:52.5600063;05:47:30.5723549;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:21.9876514;00:39:38.0323751;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1822.9698317, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.040511789213731, Elapsed = 00:30:22.9898604, TimeTotal = 06:17:52.5600085, Remaining = 05:47:29.5701481, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:22.9898604, HeatingEstimate = 00:39:37.0301683, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.040511789213731;StartedAtUtc;00:30:22.9898604;06:17:52.5600085;05:47:29.5701481;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:22.9898604;00:39:37.0301683;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1823.9682109, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.044915303446972, Elapsed = 00:30:23.9882507, TimeTotal = 06:17:52.5600196, Remaining = 05:47:28.5717689, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:23.9882507, HeatingEstimate = 00:39:36.0317891, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.044915303446972;StartedAtUtc;00:30:23.9882507;06:17:52.5600196;05:47:28.5717689;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:23.9882507;00:39:36.0317891;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1824.9675869, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.04932317443505, Elapsed = 00:30:24.9876280, TimeTotal = 06:17:52.5600209, Remaining = 05:47:27.5723929, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:23.4997316, WeightTotalEstimate = 01:11:23.4997316, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:30.0399798, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:24.9876280, HeatingEstimate = 00:39:35.0324131, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:50.6014228, WeightEstimate = 01:11:23.4997316 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.04932317443505;StartedAtUtc;00:30:24.9876280;06:17:52.5600209;05:47:27.5723929;False;232;0;0;00:00:00;01:11:23.4997316;01:11:23.4997316;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:30.0399798;00:00:00;02:00:00;00:30:24.9876280;00:39:35.0324131;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:50.6014228 [PrintingService.cs@1918] -06/14/2026 18:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268611, estimate=36.91172496032656 for layer 63, Z=6.301 [PrintingService.cs@1524] -06/14/2026 18:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 46, island count 5 [PrintingService.cs@1569] -06/14/2026 18:31:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 64, start=0, count=232, Z=6.401 [PrintingService.cs@1518] -06/14/2026 18:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:31:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1825.9688993, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.049872907959182, Elapsed = 00:30:25.9889574, TimeTotal = 06:18:03.4507610, Remaining = 05:47:37.4618036, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:25.9889574, HeatingEstimate = 00:39:34.0311007, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.049872907959182;StartedAtUtc;00:30:25.9889574;06:18:03.4507610;05:47:37.4618036;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:25.9889574;00:39:34.0311007;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1826.9699641, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.054285925723613, Elapsed = 00:30:26.9899786, TimeTotal = 06:18:03.4507174, Remaining = 05:47:36.4607388, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:26.9899786, HeatingEstimate = 00:39:33.0300359, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.054285925723613;StartedAtUtc;00:30:26.9899786;06:18:03.4507174;05:47:36.4607388;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:26.9899786;00:39:33.0300359;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1827.9709532, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.058698902424922, Elapsed = 00:30:27.9909963, TimeTotal = 06:18:03.4507460, Remaining = 05:47:35.4597497, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:27.9909963, HeatingEstimate = 00:39:32.0290468, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.058698902424922;StartedAtUtc;00:30:27.9909963;06:18:03.4507460;05:47:35.4597497;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:27.9909963;00:39:32.0290468;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1828.9761847, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.063130359630426, Elapsed = 00:30:28.9962016, TimeTotal = 06:18:03.4507198, Remaining = 05:47:34.4545182, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:28.9962016, HeatingEstimate = 00:39:31.0238153, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.063130359630426;StartedAtUtc;00:30:28.9962016;06:18:03.4507198;05:47:34.4545182;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:28.9962016;00:39:31.0238153;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1829.9828109, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.067568393766935, Elapsed = 00:30:30.0029073, TimeTotal = 06:18:03.4507993, Remaining = 05:47:33.4478920, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:30.0029073, HeatingEstimate = 00:39:30.0171891, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.067568393766935;StartedAtUtc;00:30:30.0029073;06:18:03.4507993;05:47:33.4478920;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:30.0029073;00:39:30.0171891;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1830.9824491, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.071974971632887, Elapsed = 00:30:31.0024647, TimeTotal = 06:18:03.4507185, Remaining = 05:47:32.4482538, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:31.0024647, HeatingEstimate = 00:39:29.0175509, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.071974971632887;StartedAtUtc;00:30:31.0024647;06:18:03.4507185;05:47:32.4482538;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:31.0024647;00:39:29.0175509;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1831.9826738, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.076384478763691, Elapsed = 00:30:32.0026934, TimeTotal = 06:18:03.4507225, Remaining = 05:47:31.4480291, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:32.0026934, HeatingEstimate = 00:39:28.0173262, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.076384478763691;StartedAtUtc;00:30:32.0026934;06:18:03.4507225;05:47:31.4480291;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:32.0026934;00:39:28.0173262;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/14/2026 18:31:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (200 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:31:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1832.9830964, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.08079482064915, Elapsed = 00:30:33.0031107, TimeTotal = 06:18:03.4507172, Remaining = 05:47:30.4476065, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:33.0031107, HeatingEstimate = 00:39:27.0169036, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.08079482064915;StartedAtUtc;00:30:33.0031107;06:18:03.4507172;05:47:30.4476065;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:33.0031107;00:39:27.0169036;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.9262994. SinceCollect=00:01:01.3148729. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:31:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4750, gen1=1336, gen2=61, LatencyMode=Interactive, FreeMemory=5895618560, Live=443519608, HeapSizeBytes=443722976, FragmentedBytes=1070960, TotalCommittedBytes=444891136, PinnedObjectsCount=1, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:31:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:31:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:31:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1833.9850243, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.085211826206255, Elapsed = 00:30:34.0050401, TimeTotal = 06:18:03.4507187, Remaining = 05:47:29.4456786, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:34.0050401, HeatingEstimate = 00:39:26.0149757, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.085211826206255;StartedAtUtc;00:30:34.0050401;06:18:03.4507187;05:47:29.4456786;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:34.0050401;00:39:26.0149757;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=69.75,powderChamber1=69.75,powderChamber2=69.75,powderChamber3=69.75,powderChamber4=69.75 [ControlledHeating.cs@169] -06/14/2026 18:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1834.983961, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.089615638573594, Elapsed = 00:30:35.0039767, TimeTotal = 06:18:03.4507186, Remaining = 05:47:28.4467419, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:35.0039767, HeatingEstimate = 00:39:25.0160390, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.089615638573594;StartedAtUtc;00:30:35.0039767;06:18:03.4507186;05:47:28.4467419;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:35.0039767;00:39:25.0160390;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1835.9832432, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.094021679474519, Elapsed = 00:30:36.0034329, TimeTotal = 06:18:03.4508926, Remaining = 05:47:27.4474597, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:36.0034329, HeatingEstimate = 00:39:24.0167568, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.094021679474519;StartedAtUtc;00:30:36.0034329;06:18:03.4508926;05:47:27.4474597;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:36.0034329;00:39:24.0167568;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1836.9857022, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.098440318152305, Elapsed = 00:30:37.0057186, TimeTotal = 06:18:03.4507193, Remaining = 05:47:26.4450007, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:37.0057186, HeatingEstimate = 00:39:23.0142978, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.098440318152305;StartedAtUtc;00:30:37.0057186;06:18:03.4507193;05:47:26.4450007;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:37.0057186;00:39:23.0142978;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1837.9842055, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.102842218660157, Elapsed = 00:30:38.0042215, TimeTotal = 06:18:03.4507189, Remaining = 05:47:25.4464974, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:38.0042215, HeatingEstimate = 00:39:22.0157945, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.102842218660157;StartedAtUtc;00:30:38.0042215;06:18:03.4507189;05:47:25.4464974;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:38.0042215;00:39:22.0157945;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:31:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1838.9838753, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.107249269380876, Elapsed = 00:30:39.0038928, TimeTotal = 06:18:03.4507204, Remaining = 05:47:24.4468276, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:39.0038928, HeatingEstimate = 00:39:21.0161247, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:31:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.107249269380876;StartedAtUtc;00:30:39.0038928;06:18:03.4507204;05:47:24.4468276;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:39.0038928;00:39:21.0161247;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1839.9860158, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.11166719314356, Elapsed = 00:30:40.0060301, TimeTotal = 06:18:03.4507172, Remaining = 05:47:23.4446871, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:40.0060301, HeatingEstimate = 00:39:20.0139842, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.11166719314356;StartedAtUtc;00:30:40.0060301;06:18:03.4507172;05:47:23.4446871;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:40.0060301;00:39:20.0139842;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:00 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/14/2026 18:32:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1840.9896565, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.116091759299676, Elapsed = 00:30:41.0096747, TimeTotal = 06:18:03.4507211, Remaining = 05:47:22.4410464, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:41.0096747, HeatingEstimate = 00:39:19.0103435, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.116091759299676;StartedAtUtc;00:30:41.0096747;06:18:03.4507211;05:47:22.4410464;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:41.0096747;00:39:19.0103435;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:01 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/14/2026 18:32:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/14/2026 18:32:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/14/2026 18:32:01 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/14/2026 18:32:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/14/2026 18:32:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1841.9915491, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.120508599512407, Elapsed = 00:30:42.0115664, TimeTotal = 06:18:03.4507202, Remaining = 05:47:21.4391538, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:42.0115664, HeatingEstimate = 00:39:18.0084509, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.120508599512407;StartedAtUtc;00:30:42.0115664;06:18:03.4507202;05:47:21.4391538;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:42.0115664;00:39:18.0084509;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=59 that are outside of set tolerance 10 for current step target 69.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:32:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1842.9939404, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.124927630143977, Elapsed = 00:30:43.0139548, TimeTotal = 06:18:03.4507173, Remaining = 05:47:20.4367625, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:43.0139548, HeatingEstimate = 00:39:17.0060596, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.124927630143977;StartedAtUtc;00:30:43.0139548;06:18:03.4507173;05:47:20.4367625;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:43.0139548;00:39:17.0060596;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1843.9971437, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.12935026356462, Elapsed = 00:30:44.0171609, TimeTotal = 06:18:03.4507201, Remaining = 05:47:19.4335592, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:44.0171609, HeatingEstimate = 00:39:16.0028563, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.12935026356462;StartedAtUtc;00:30:44.0171609;06:18:03.4507201;05:47:19.4335592;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:44.0171609;00:39:16.0028563;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1844.9954144, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.133751191304697, Elapsed = 00:30:45.0154442, TimeTotal = 06:18:03.4507327, Remaining = 05:47:18.4352885, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:45.0154442, HeatingEstimate = 00:39:15.0045856, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.133751191304697;StartedAtUtc;00:30:45.0154442;06:18:03.4507327;05:47:18.4352885;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:45.0154442;00:39:15.0045856;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1845.9984302, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.138172950745606, Elapsed = 00:30:46.0184511, TimeTotal = 06:18:03.4507238, Remaining = 05:47:17.4322727, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:46.0184511, HeatingEstimate = 00:39:14.0015698, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.138172950745606;StartedAtUtc;00:30:46.0184511;06:18:03.4507238;05:47:17.4322727;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:46.0184511;00:39:14.0015698;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1847.00226, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.142598325841133, Elapsed = 00:30:47.0222787, TimeTotal = 06:18:03.4507216, Remaining = 05:47:16.4284429, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:47.0222787, HeatingEstimate = 00:39:12.9977400, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.142598325841133;StartedAtUtc;00:30:47.0222787;06:18:03.4507216;05:47:16.4284429;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:47.0222787;00:39:12.9977400;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 69.75 with temperature 66 [HeaterCheck.cs@67] -06/14/2026 18:32:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1848.0054995, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.147021087666557, Elapsed = 00:30:48.0255133, TimeTotal = 06:18:03.4507167, Remaining = 05:47:15.4252034, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:48.0255133, HeatingEstimate = 00:39:11.9945005, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.147021087666557;StartedAtUtc;00:30:48.0255133;06:18:03.4507167;05:47:15.4252034;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:48.0255133;00:39:11.9945005;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1849.0042191, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.151423966839092, Elapsed = 00:30:49.0242387, TimeTotal = 06:18:03.4507225, Remaining = 05:47:14.4264838, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:49.0242387, HeatingEstimate = 00:39:10.9957809, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.151423966839092;StartedAtUtc;00:30:49.0242387;06:18:03.4507225;05:47:14.4264838;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:49.0242387;00:39:10.9957809;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1850.0061699, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.155841147440936, Elapsed = 00:30:50.0262093, TimeTotal = 06:18:03.4507423, Remaining = 05:47:13.4245330, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:50.0262093, HeatingEstimate = 00:39:09.9938301, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.155841147440936;StartedAtUtc;00:30:50.0262093;06:18:03.4507423;05:47:13.4245330;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:50.0262093;00:39:09.9938301;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1851.0100329, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.160266595209439, Elapsed = 00:30:51.0300519, TimeTotal = 06:18:03.4507219, Remaining = 05:47:12.4206700, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:51.0300519, HeatingEstimate = 00:39:08.9899671, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.160266595209439;StartedAtUtc;00:30:51.0300519;06:18:03.4507219;05:47:12.4206700;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:51.0300519;00:39:08.9899671;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.2075653076172, Elapsed=00:00:30.1284402 [ControlledHeating.cs@486] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.2075653076172 after 00:00:30.1285046 [ControlledHeating.cs@493] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:18.0214714. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632901. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:18.0867085. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:18.0976572. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 290539278353 (290539278353 @ 0) for mcu = 2406.602198 [14/06/2026 15:34:59] (2421.1606529416667 sec) to 292943036405 (from now=292823036405, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 290539278353 (290539278353 @ 0) for mcu = 2406.602198 [14/06/2026 15:34:59] (2421.1606529416667 sec) to 292943036405 (from external timestamp, flags=None, requested=292943036405 (292943036405 @ 0) for mcu = 2426.633773 [14/06/2026 15:35:19] (2441.1919700416665 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 290539278353 (290539278353 @ 0) for mcu = 2406.602198 [14/06/2026 15:34:59] (2421.1606529416667 sec) to 292943036405 (from external timestamp, flags=None, requested=292943036405 (292943036405 @ 0) for mcu = 2426.633773 [14/06/2026 15:35:19] (2441.1919700416665 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:32:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1852.0145367, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.164694944470693, Elapsed = 00:30:52.0345542, TimeTotal = 06:18:03.4507204, Remaining = 05:47:11.4161662, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:52.0345542, HeatingEstimate = 00:39:07.9854633, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.164694944470693;StartedAtUtc;00:30:52.0345542;06:18:03.4507204;05:47:11.4161662;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:52.0345542;00:39:07.9854633;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1853.018061, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.169122196080462, Elapsed = 00:30:53.0388725, TimeTotal = 06:18:03.4515144, Remaining = 05:47:10.4126419, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:53.0388725, HeatingEstimate = 00:39:06.9819390, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.169122196080462;StartedAtUtc;00:30:53.0388725;06:18:03.4515144;05:47:10.4126419;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:53.0388725;00:39:06.9819390;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1854.0210521, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.173540665441227, Elapsed = 00:30:54.0410689, TimeTotal = 06:18:03.4507197, Remaining = 05:47:09.4096508, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:54.0410689, HeatingEstimate = 00:39:05.9789479, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.173540665441227;StartedAtUtc;00:30:54.0410689;06:18:03.4507197;05:47:09.4096508;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:54.0410689;00:39:05.9789479;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.1176552 ~ 5.95 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:32:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1855.0231912, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.177959022246784, Elapsed = 00:30:55.0433133, TimeTotal = 06:18:03.4508250, Remaining = 05:47:08.4075117, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:55.0433133, HeatingEstimate = 00:39:04.9768088, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.177959022246784;StartedAtUtc;00:30:55.0433133;06:18:03.4508250;05:47:08.4075117;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:55.0433133;00:39:04.9768088;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1856.0247261, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.182374141420198, Elapsed = 00:30:56.0448117, TimeTotal = 06:18:03.4507885, Remaining = 05:47:07.4059768, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:56.0448117, HeatingEstimate = 00:39:03.9752739, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.182374141420198;StartedAtUtc;00:30:56.0448117;06:18:03.4507885;05:47:07.4059768;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:56.0448117;00:39:03.9752739;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203025, estimate=37.66870050425212 for layer 64, Z=6.401 [PrintingService.cs@1524] -06/14/2026 18:32:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 47, island count 5 [PrintingService.cs@1569] -06/14/2026 18:32:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 65, start=0, count=232, Z=6.501 [PrintingService.cs@1518] -06/14/2026 18:32:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:32:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1857.0244317, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.186781512254647, Elapsed = 00:30:57.0445589, TimeTotal = 06:18:03.4508301, Remaining = 05:47:06.4062712, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:57.0445589, HeatingEstimate = 00:39:02.9755683, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.186781512254647;StartedAtUtc;00:30:57.0445589;06:18:03.4508301;05:47:06.4062712;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:57.0445589;00:39:02.9755683;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1858.025668, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.191195268922808, Elapsed = 00:30:58.0457473, TimeTotal = 06:18:03.4507822, Remaining = 05:47:05.4050349, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:58.0457473, HeatingEstimate = 00:39:01.9743320, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.191195268922808;StartedAtUtc;00:30:58.0457473;06:18:03.4507822;05:47:05.4050349;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:58.0457473;00:39:01.9743320;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1859.0263323, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.195606728162135, Elapsed = 00:30:59.0464191, TimeTotal = 06:18:03.4507897, Remaining = 05:47:04.4043706, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:30:59.0464191, HeatingEstimate = 00:39:00.9736677, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.195606728162135;StartedAtUtc;00:30:59.0464191;06:18:03.4507897;05:47:04.4043706;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:30:59.0464191;00:39:00.9736677;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1860.0273397, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.20001939683452, Elapsed = 00:31:00.0473591, TimeTotal = 06:18:03.4507223, Remaining = 05:47:03.4033632, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:00.0473591, HeatingEstimate = 00:38:59.9726603, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.20001939683452;StartedAtUtc;00:31:00.0473591;06:18:03.4507223;05:47:03.4033632;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:00.0473591;00:38:59.9726603;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1861.0291846, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.204436027978925, Elapsed = 00:31:01.0492034, TimeTotal = 06:18:03.4507217, Remaining = 05:47:02.4015183, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:01.0492034, HeatingEstimate = 00:38:58.9708154, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.204436027978925;StartedAtUtc;00:31:01.0492034;06:18:03.4507217;05:47:02.4015183;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:01.0492034;00:38:58.9708154;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1862.0305359, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.208850490776364, Elapsed = 00:31:02.0505560, TimeTotal = 06:18:03.4507230, Remaining = 05:47:01.4001670, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:02.0505560, HeatingEstimate = 00:38:57.9694641, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.208850490776364;StartedAtUtc;00:31:02.0505560;06:18:03.4507230;05:47:01.4001670;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:02.0505560;00:38:57.9694641;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.2017251. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:32:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:32:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1863.0345466, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.213276654474491, Elapsed = 00:31:03.0545623, TimeTotal = 06:18:03.4507186, Remaining = 05:47:00.3961563, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:03.0545623, HeatingEstimate = 00:38:56.9654534, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.213276654474491;StartedAtUtc;00:31:03.0545623;06:18:03.4507186;05:47:00.3961563;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:03.0545623;00:38:56.9654534;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 69.75 with temperature 57.5 [HeaterCheck.cs@111] -06/14/2026 18:32:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1864.0385466, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.217702803777788, Elapsed = 00:31:04.0585660, TimeTotal = 06:18:03.4507223, Remaining = 05:46:59.3921563, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:04.0585660, HeatingEstimate = 00:38:55.9614534, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.217702803777788;StartedAtUtc;00:31:04.0585660;06:18:03.4507223;05:46:59.3921563;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:04.0585660;00:38:55.9614534;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1865.0389974, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.222113297933612, Elapsed = 00:31:05.0590184, TimeTotal = 06:18:03.4507239, Remaining = 05:46:58.3917055, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:05.0590184, HeatingEstimate = 00:38:54.9610026, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.222113297933612;StartedAtUtc;00:31:05.0590184;06:18:03.4507239;05:46:58.3917055;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:05.0590184;00:38:54.9610026;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1866.0426805, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.226538129479012, Elapsed = 00:31:06.0627248, TimeTotal = 06:18:03.4507472, Remaining = 05:46:57.3880224, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:06.0627248, HeatingEstimate = 00:38:53.9573195, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.226538129479012;StartedAtUtc;00:31:06.0627248;06:18:03.4507472;05:46:57.3880224;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:06.0627248;00:38:53.9573195;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1867.0433602, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.230949501251832, Elapsed = 00:31:07.0633736, TimeTotal = 06:18:03.4507163, Remaining = 05:46:56.3873427, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:07.0633736, HeatingEstimate = 00:38:52.9566398, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.230949501251832;StartedAtUtc;00:31:07.0633736;06:18:03.4507163;05:46:56.3873427;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:07.0633736;00:38:52.9566398;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1868.0435721, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.235359276370874, Elapsed = 00:31:08.0636697, TimeTotal = 06:18:03.4508005, Remaining = 05:46:55.3871308, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:08.0636697, HeatingEstimate = 00:38:51.9564279, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.235359276370874;StartedAtUtc;00:31:08.0636697;06:18:03.4508005;05:46:55.3871308;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:08.0636697;00:38:51.9564279;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1869.0461717, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.23977899794907, Elapsed = 00:31:09.0662102, TimeTotal = 06:18:03.4507414, Remaining = 05:46:54.3845312, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:09.0662102, HeatingEstimate = 00:38:50.9538283, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.23977899794907;StartedAtUtc;00:31:09.0662102;06:18:03.4507414;05:46:54.3845312;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:09.0662102;00:38:50.9538283;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1870.0500798, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.244204639358031, Elapsed = 00:31:10.0700966, TimeTotal = 06:18:03.4507197, Remaining = 05:46:53.3806231, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:10.0700966, HeatingEstimate = 00:38:49.9499202, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.244204639358031;StartedAtUtc;00:31:10.0700966;06:18:03.4507197;05:46:53.3806231;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:10.0700966;00:38:49.9499202;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1871.0532222, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.24862701844282, Elapsed = 00:31:11.0732453, TimeTotal = 06:18:03.4507260, Remaining = 05:46:52.3774807, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:11.0732453, HeatingEstimate = 00:38:48.9467778, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.24862701844282;StartedAtUtc;00:31:11.0732453;06:18:03.4507260;05:46:52.3774807;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:11.0732453;00:38:48.9467778;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1872.0562772, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.253049555016215, Elapsed = 00:31:12.0764408, TimeTotal = 06:18:03.4508665, Remaining = 05:46:51.3744257, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:12.0764408, HeatingEstimate = 00:38:47.9437228, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.253049555016215;StartedAtUtc;00:31:12.0764408;06:18:03.4508665;05:46:51.3744257;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:12.0764408;00:38:47.9437228;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1873.0562574, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.25745737672856, Elapsed = 00:31:13.0762748, TimeTotal = 06:18:03.4507203, Remaining = 05:46:50.3744455, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:13.0762748, HeatingEstimate = 00:38:46.9437426, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.25745737672856;StartedAtUtc;00:31:13.0762748;06:18:03.4507203;05:46:50.3744455;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:13.0762748;00:38:46.9437426;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1874.0588731, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.261877443963117, Elapsed = 00:31:14.0788993, TimeTotal = 06:18:03.4507291, Remaining = 05:46:49.3718298, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:14.0788993, HeatingEstimate = 00:38:45.9411269, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.261877443963117;StartedAtUtc;00:31:14.0788993;06:18:03.4507291;05:46:49.3718298;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:14.0788993;00:38:45.9411269;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1875.0587154, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.266285226424667, Elapsed = 00:31:15.0787360, TimeTotal = 06:18:03.4507235, Remaining = 05:46:48.3719875, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:15.0787360, HeatingEstimate = 00:38:44.9412846, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.266285226424667;StartedAtUtc;00:31:15.0787360;06:18:03.4507235;05:46:48.3719875;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:15.0787360;00:38:44.9412846;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1876.0604904, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.270701614118602, Elapsed = 00:31:16.0805264, TimeTotal = 06:18:03.4507389, Remaining = 05:46:47.3702125, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:16.0805264, HeatingEstimate = 00:38:43.9395096, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.270701614118602;StartedAtUtc;00:31:16.0805264;06:18:03.4507389;05:46:47.3702125;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:16.0805264;00:38:43.9395096;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1877.0589683, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.275103324202147, Elapsed = 00:31:17.0789845, TimeTotal = 06:18:03.4507191, Remaining = 05:46:46.3717346, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:17.0789845, HeatingEstimate = 00:38:42.9410317, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.275103324202147;StartedAtUtc;00:31:17.0789845;06:18:03.4507191;05:46:46.3717346;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:17.0789845;00:38:42.9410317;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1878.0647164, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.279537154520659, Elapsed = 00:31:18.0847300, TimeTotal = 06:18:03.4507165, Remaining = 05:46:45.3659865, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:18.0847300, HeatingEstimate = 00:38:41.9352836, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.279537154520659;StartedAtUtc;00:31:18.0847300;06:18:03.4507165;05:46:45.3659865;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:18.0847300;00:38:41.9352836;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1879.0631198, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.283938627157305, Elapsed = 00:31:19.0831361, TimeTotal = 06:18:03.4507192, Remaining = 05:46:44.3675831, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:19.0831361, HeatingEstimate = 00:38:40.9368802, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.283938627157305;StartedAtUtc;00:31:19.0831361;06:18:03.4507192;05:46:44.3675831;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:19.0831361;00:38:40.9368802;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1880.0627571, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.288345520438849, Elapsed = 00:31:20.0827714, TimeTotal = 06:18:03.4507172, Remaining = 05:46:43.3679458, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:20.0827714, HeatingEstimate = 00:38:39.9372429, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.288345520438849;StartedAtUtc;00:31:20.0827714;06:18:03.4507172;05:46:43.3679458;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:20.0827714;00:38:39.9372429;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1881.0635209, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.292757394451284, Elapsed = 00:31:21.0835368, TimeTotal = 06:18:03.4507188, Remaining = 05:46:42.3671820, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:21.0835368, HeatingEstimate = 00:38:38.9364791, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.292757394451284;StartedAtUtc;00:31:21.0835368;06:18:03.4507188;05:46:42.3671820;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:21.0835368;00:38:38.9364791;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.231689453125, Elapsed=00:00:30.2082598 [ControlledHeating.cs@486] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.231689453125 after 00:00:30.2083169 [ControlledHeating.cs@493] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:48.2295917. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633718. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:48.2943706. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:48.3066036. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 294154557633 (294154557633 @ 0) for mcu = 2436.729974 [14/06/2026 15:35:29] (2451.287980275 sec) to 296568011971 (from now=296448011971, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 294154557633 (294154557633 @ 0) for mcu = 2436.729974 [14/06/2026 15:35:29] (2451.287980275 sec) to 296568011971 (from external timestamp, flags=None, requested=296568011971 (296568011971 @ 0) for mcu = 2456.842374 [14/06/2026 15:35:49] (2471.4000997583335 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 294154557633 (294154557633 @ 0) for mcu = 2436.729974 [14/06/2026 15:35:29] (2451.287980275 sec) to 296568011971 (from external timestamp, flags=None, requested=296568011971 (296568011971 @ 0) for mcu = 2456.842374 [14/06/2026 15:35:49] (2471.4000997583335 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:32:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1882.062672, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.297162155236167, Elapsed = 00:31:22.0826886, TimeTotal = 06:18:03.4507195, Remaining = 05:46:41.3680309, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:22.0826886, HeatingEstimate = 00:38:37.9373280, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.297162155236167;StartedAtUtc;00:31:22.0826886;06:18:03.4507195;05:46:41.3680309;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:22.0826886;00:38:37.9373280;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1883.0630778, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.301572440898102, Elapsed = 00:31:23.0830935, TimeTotal = 06:18:03.4507186, Remaining = 05:46:40.3676251, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:23.0830935, HeatingEstimate = 00:38:36.9369222, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.301572440898102;StartedAtUtc;00:31:23.0830935;06:18:03.4507186;05:46:40.3676251;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:23.0830935;00:38:36.9369222;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1884.0634257, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.305982469287052, Elapsed = 00:31:24.0834400, TimeTotal = 06:18:03.4507172, Remaining = 05:46:39.3672772, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:24.0834400, HeatingEstimate = 00:38:35.9365743, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.305982469287052;StartedAtUtc;00:31:24.0834400;06:18:03.4507172;05:46:39.3672772;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:24.0834400;00:38:35.9365743;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1885.0658667, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.310403096605397, Elapsed = 00:31:25.0862189, TimeTotal = 06:18:03.4510551, Remaining = 05:46:38.3648362, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:25.0862189, HeatingEstimate = 00:38:34.9341333, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.310403096605397;StartedAtUtc;00:31:25.0862189;06:18:03.4510551;05:46:38.3648362;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:25.0862189;00:38:34.9341333;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1886.0686998, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.314822722033673, Elapsed = 00:31:26.0887144, TimeTotal = 06:18:03.4507175, Remaining = 05:46:37.3620031, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:26.0887144, HeatingEstimate = 00:38:33.9313002, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.314822722033673;StartedAtUtc;00:31:26.0887144;06:18:03.4507175;05:46:37.3620031;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:26.0887144;00:38:33.9313002;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1887.073555, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.319252647936896, Elapsed = 00:31:27.0935749, TimeTotal = 06:18:03.4507228, Remaining = 05:46:36.3571479, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:27.0935749, HeatingEstimate = 00:38:32.9264450, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.319252647936896;StartedAtUtc;00:31:27.0935749;06:18:03.4507228;05:46:36.3571479;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:27.0935749;00:38:32.9264450;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1888.0728919, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.323658891038196, Elapsed = 00:31:28.0930766, TimeTotal = 06:18:03.4508876, Remaining = 05:46:35.3578110, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:28.0930766, HeatingEstimate = 00:38:31.9271081, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.323658891038196;StartedAtUtc;00:31:28.0930766;06:18:03.4508876;05:46:35.3578110;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:28.0930766;00:38:31.9271081;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1889.0719441, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.328062580083111, Elapsed = 00:31:29.0919722, TimeTotal = 06:18:03.4507310, Remaining = 05:46:34.3587588, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:29.0919722, HeatingEstimate = 00:38:30.9280559, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.328062580083111;StartedAtUtc;00:31:29.0919722;06:18:03.4507310;05:46:34.3587588;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:29.0919722;00:38:30.9280559;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1890.0716203, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.33246992693012, Elapsed = 00:31:30.0917162, TimeTotal = 06:18:03.4507988, Remaining = 05:46:33.3590826, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:30.0917162, HeatingEstimate = 00:38:29.9283797, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.33246992693012;StartedAtUtc;00:31:30.0917162;06:18:03.4507988;05:46:33.3590826;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:30.0917162;00:38:29.9283797;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1891.0710875, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.336875855335018, Elapsed = 00:31:31.0911282, TimeTotal = 06:18:03.4507436, Remaining = 05:46:32.3596154, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:31.0911282, HeatingEstimate = 00:38:28.9289125, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.336875855335018;StartedAtUtc;00:31:31.0911282;06:18:03.4507436;05:46:32.3596154;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:31.0911282;00:38:28.9289125;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268812, estimate=36.97788104419175 for layer 65, Z=6.501 [PrintingService.cs@1524] -06/14/2026 18:32:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 48, island count 5 [PrintingService.cs@1569] -06/14/2026 18:32:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 66, start=0, count=232, Z=6.601 [PrintingService.cs@1518] -06/14/2026 18:32:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:32:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1892.0718162, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.34128747196486, Elapsed = 00:31:32.0918331, TimeTotal = 06:18:03.4507198, Remaining = 05:46:31.3588867, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:32.0918331, HeatingEstimate = 00:38:27.9281838, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.34128747196486;StartedAtUtc;00:31:32.0918331;06:18:03.4507198;05:46:31.3588867;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:32.0918331;00:38:27.9281838;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9900745. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.4127442. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:32:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:32:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:32:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1893.074836, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.345709712578204, Elapsed = 00:31:33.0949587, TimeTotal = 06:18:03.4508256, Remaining = 05:46:30.3558669, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:33.0949587, HeatingEstimate = 00:38:26.9251640, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.345709712578204;StartedAtUtc;00:31:33.0949587;06:18:03.4508256;05:46:30.3558669;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:33.0949587;00:38:26.9251640;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1894.0753061, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.350119850174861, Elapsed = 00:31:34.0953211, TimeTotal = 06:18:03.4507179, Remaining = 05:46:29.3553968, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:34.0953211, HeatingEstimate = 00:38:25.9246939, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.350119850174861;StartedAtUtc;00:31:34.0953211;06:18:03.4507179;05:46:29.3553968;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:34.0953211;00:38:25.9246939;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1895.0750871, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.354527375347914, Elapsed = 00:31:35.0950997, TimeTotal = 06:18:03.4507155, Remaining = 05:46:28.3556158, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:35.0950997, HeatingEstimate = 00:38:24.9249129, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.354527375347914;StartedAtUtc;00:31:35.0950997;06:18:03.4507155;05:46:28.3556158;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:35.0950997;00:38:24.9249129;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1896.0786114, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.35895182342477, Elapsed = 00:31:36.0987257, TimeTotal = 06:18:03.4508172, Remaining = 05:46:27.3520915, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:36.0987257, HeatingEstimate = 00:38:23.9213886, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.35895182342477;StartedAtUtc;00:31:36.0987257;06:18:03.4508172;05:46:27.3520915;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:36.0987257;00:38:23.9213886;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1897.0800083, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.363366120408426, Elapsed = 00:31:37.1000331, TimeTotal = 06:18:03.4507277, Remaining = 05:46:26.3506946, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:37.1000331, HeatingEstimate = 00:38:22.9199917, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.363366120408426;StartedAtUtc;00:31:37.1000331;06:18:03.4507277;05:46:26.3506946;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:37.1000331;00:38:22.9199917;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1898.0804542, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.367776571137394, Elapsed = 00:31:38.1004752, TimeTotal = 06:18:03.4507239, Remaining = 05:46:25.3502487, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:38.1004752, HeatingEstimate = 00:38:21.9195458, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.367776571137394;StartedAtUtc;00:31:38.1004752;06:18:03.4507239;05:46:25.3502487;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:38.1004752;00:38:21.9195458;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:32:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1899.0813553, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.372189116676383, Elapsed = 00:31:39.1013943, TimeTotal = 06:18:03.4507419, Remaining = 05:46:24.3493476, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:39.1013943, HeatingEstimate = 00:38:20.9186447, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:32:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.372189116676383;StartedAtUtc;00:31:39.1013943;06:18:03.4507419;05:46:24.3493476;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:39.1013943;00:38:20.9186447;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1900.0798639, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.376590983596751, Elapsed = 00:31:40.0998884, TimeTotal = 06:18:03.4507274, Remaining = 05:46:23.3508390, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:40.0998884, HeatingEstimate = 00:38:19.9201361, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.376590983596751;StartedAtUtc;00:31:40.0998884;06:18:03.4507274;05:46:23.3508390;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:40.0998884;00:38:19.9201361;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1901.0797354, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.38099888754492, Elapsed = 00:31:41.0997525, TimeTotal = 06:18:03.4507200, Remaining = 05:46:22.3509675, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:41.0997525, HeatingEstimate = 00:38:18.9202646, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.38099888754492;StartedAtUtc;00:31:41.0997525;06:18:03.4507200;05:46:22.3509675;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:41.0997525;00:38:18.9202646;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 69.75 with temperature 60.75 [HeaterCheck.cs@111] -06/14/2026 18:33:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1902.0792668, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.385405378595957, Elapsed = 00:31:42.0992979, TimeTotal = 06:18:03.4507340, Remaining = 05:46:21.3514361, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:42.0992979, HeatingEstimate = 00:38:17.9207332, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.385405378595957;StartedAtUtc;00:31:42.0992979;06:18:03.4507340;05:46:21.3514361;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:42.0992979;00:38:17.9207332;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:02 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (141 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/14/2026 18:33:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1903.0791567, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.389813328525996, Elapsed = 00:31:43.0991717, TimeTotal = 06:18:03.4507179, Remaining = 05:46:20.3515462, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:43.0991717, HeatingEstimate = 00:38:16.9208433, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.389813328525996;StartedAtUtc;00:31:43.0991717;06:18:03.4507179;05:46:20.3515462;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:43.0991717;00:38:16.9208433;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1904.0792669, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.394222309423844, Elapsed = 00:31:44.0992806, TimeTotal = 06:18:03.4507166, Remaining = 05:46:19.3514360, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:44.0992806, HeatingEstimate = 00:38:15.9207331, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.394222309423844;StartedAtUtc;00:31:44.0992806;06:18:03.4507166;05:46:19.3514360;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:44.0992806;00:38:15.9207331;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1905.0821538, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.398643736144145, Elapsed = 00:31:45.1022169, TimeTotal = 06:18:03.4507660, Remaining = 05:46:18.3485491, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:45.1022169, HeatingEstimate = 00:38:14.9178462, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.398643736144145;StartedAtUtc;00:31:45.1022169;06:18:03.4507660;05:46:18.3485491;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:45.1022169;00:38:14.9178462;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1906.0862312, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.403070029165189, Elapsed = 00:31:46.1062491, TimeTotal = 06:18:03.4507208, Remaining = 05:46:17.3444717, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:46.1062491, HeatingEstimate = 00:38:13.9137688, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.403070029165189;StartedAtUtc;00:31:46.1062491;06:18:03.4507208;05:46:17.3444717;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:46.1062491;00:38:13.9137688;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1907.0872933, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.407483200054127, Elapsed = 00:31:47.1073083, TimeTotal = 06:18:03.4507179, Remaining = 05:46:16.3434096, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:47.1073083, HeatingEstimate = 00:38:12.9127067, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.407483200054127;StartedAtUtc;00:31:47.1073083;06:18:03.4507179;05:46:16.3434096;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:47.1073083;00:38:12.9127067;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1908.0880372, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.411895014996269, Elapsed = 00:31:48.1080609, TimeTotal = 06:18:03.4507266, Remaining = 05:46:15.3426657, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:48.1080609, HeatingEstimate = 00:38:11.9119628, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.411895014996269;StartedAtUtc;00:31:48.1080609;06:18:03.4507266;05:46:15.3426657;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:48.1080609;00:38:11.9119628;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1909.0883617, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.416304906720583, Elapsed = 00:31:49.1083757, TimeTotal = 06:18:03.4507169, Remaining = 05:46:14.3423412, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:49.1083757, HeatingEstimate = 00:38:10.9116383, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.416304906720583;StartedAtUtc;00:31:49.1083757;06:18:03.4507169;05:46:14.3423412;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:49.1083757;00:38:10.9116383;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1910.0889985, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.420716280192424, Elapsed = 00:31:50.1090288, TimeTotal = 06:18:03.4507332, Remaining = 05:46:13.3417044, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:50.1090288, HeatingEstimate = 00:38:09.9110015, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.420716280192424;StartedAtUtc;00:31:50.1090288;06:18:03.4507332;05:46:13.3417044;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:50.1090288;00:38:09.9110015;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=70.75,powderChamber1=70.75,powderChamber2=70.75,powderChamber3=70.75,powderChamber4=70.75 [ControlledHeating.cs@169] -06/14/2026 18:33:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1911.0874572, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.425117921509424, Elapsed = 00:31:51.1074716, TimeTotal = 06:18:03.4507173, Remaining = 05:46:12.3432457, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:51.1074716, HeatingEstimate = 00:38:08.9125428, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.425117921509424;StartedAtUtc;00:31:51.1074716;06:18:03.4507173;05:46:12.3432457;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:51.1074716;00:38:08.9125428;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.5984649658203, Elapsed=00:00:30.2072276 [ControlledHeating.cs@486] -06/14/2026 18:33:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.5984649658203 after 00:00:30.2072831 [ControlledHeating.cs@493] -06/14/2026 18:33:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:33:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2893132. SinceCollect=00:01:18.7266904. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4906, gen1=1444, gen2=62, LatencyMode=Interactive, FreeMemory=5730713600, Live=442769688, HeapSizeBytes=540133336, FragmentedBytes=97790080, TotalCommittedBytes=551190528, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634502. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0627378. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0754036. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:33:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 297779533199 (297779533199 @ 0) for mcu = 2466.938518 [14/06/2026 15:35:59] (2481.496109991667 sec) to 300227446620 (from now=300107446620, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 297779533199 (297779533199 @ 0) for mcu = 2466.938518 [14/06/2026 15:35:59] (2481.496109991667 sec) to 300227446620 (from external timestamp, flags=None, requested=300227446620 (300227446620 @ 0) for mcu = 2487.338083 [14/06/2026 15:36:20] (2501.8953885 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 297779533199 (297779533199 @ 0) for mcu = 2466.938518 [14/06/2026 15:35:59] (2481.496109991667 sec) to 300227446620 (from external timestamp, flags=None, requested=300227446620 (300227446620 @ 0) for mcu = 2487.338083 [14/06/2026 15:36:20] (2501.8953885 sec), advance=0) [McuStepper.cs@843] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1912.0884773, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.429530921777632, Elapsed = 00:31:52.1084924, TimeTotal = 06:18:03.4507180, Remaining = 05:46:11.3422256, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:52.1084924, HeatingEstimate = 00:38:07.9115227, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.429530921777632;StartedAtUtc;00:31:52.1084924;06:18:03.4507180;05:46:11.3422256;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:52.1084924;00:38:07.9115227;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1913.0875706, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.433935424114107, Elapsed = 00:31:53.1075855, TimeTotal = 06:18:03.4507178, Remaining = 05:46:10.3431323, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:53.1075855, HeatingEstimate = 00:38:06.9124294, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.433935424114107;StartedAtUtc;00:31:53.1075855;06:18:03.4507178;05:46:10.3431323;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:53.1075855;00:38:06.9124294;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1914.0878402, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.438345107325807, Elapsed = 00:31:54.1078537, TimeTotal = 06:18:03.4507164, Remaining = 05:46:09.3428627, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:54.1078537, HeatingEstimate = 00:38:05.9121598, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.438345107325807;StartedAtUtc;00:31:54.1078537;06:18:03.4507164;05:46:09.3428627;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:54.1078537;00:38:05.9121598;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0451804 ~ 6 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/14/2026 18:33:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1915.0875164, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.44275219552272, Elapsed = 00:31:55.1075337, TimeTotal = 06:18:03.4507202, Remaining = 05:46:08.3431865, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:55.1075337, HeatingEstimate = 00:38:04.9124836, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.44275219552272;StartedAtUtc;00:31:55.1075337;06:18:03.4507202;05:46:08.3431865;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:55.1075337;00:38:04.9124836;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1916.0879086, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.447162411548033, Elapsed = 00:31:56.1079226, TimeTotal = 06:18:03.4507169, Remaining = 05:46:07.3427943, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:56.1079226, HeatingEstimate = 00:38:03.9120914, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.447162411548033;StartedAtUtc;00:31:56.1079226;06:18:03.4507169;05:46:07.3427943;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:56.1079226;00:38:03.9120914;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1917.0894063, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.451577528212361, Elapsed = 00:31:57.1094237, TimeTotal = 06:18:03.4507203, Remaining = 05:46:06.3412966, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:57.1094237, HeatingEstimate = 00:38:02.9105937, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.451577528212361;StartedAtUtc;00:31:57.1094237;06:18:03.4507203;05:46:06.3412966;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:57.1094237;00:38:02.9105937;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:18 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=59.75 that are outside of set tolerance 10 for current step target 70.75 and final target 145 [ControlledHeating.cs@205] -06/14/2026 18:33:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1918.0921155, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.455998012409252, Elapsed = 00:31:58.1121429, TimeTotal = 06:18:03.4507303, Remaining = 05:46:05.3385874, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:58.1121429, HeatingEstimate = 00:38:01.9078845, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.455998012409252;StartedAtUtc;00:31:58.1121429;06:18:03.4507303;05:46:05.3385874;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:58.1121429;00:38:01.9078845;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=71.75,powderChamber1=71.75,powderChamber2=71.75,powderChamber3=71.75,powderChamber4=71.75 [ControlledHeating.cs@169] -06/14/2026 18:33:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1919.0915643, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.46040405573454, Elapsed = 00:31:59.1115850, TimeTotal = 06:18:03.4507236, Remaining = 05:46:04.3391386, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:59.1115850, HeatingEstimate = 00:38:00.9084357, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.46040405573454;StartedAtUtc;00:31:59.1115850;06:18:03.4507236;05:46:04.3391386;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:31:59.1115850;00:38:00.9084357;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1920.0939483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.464823060279842, Elapsed = 00:32:00.1139676, TimeTotal = 06:18:03.4507222, Remaining = 05:46:03.3367546, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:34.3904547, WeightTotalEstimate = 01:11:34.3904547, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:40.9307029, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:00.1139676, HeatingEstimate = 00:37:59.9060517, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:01.4921459, WeightEstimate = 01:11:34.3904547 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.464823060279842;StartedAtUtc;00:32:00.1139676;06:18:03.4507222;05:46:03.3367546;False;232;0;0;00:00:00;01:11:34.3904547;01:11:34.3904547;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:40.9307029;00:00:00;02:00:00;00:32:00.1139676;00:37:59.9060517;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:01.4921459 [PrintingService.cs@1918] -06/14/2026 18:33:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203030, estimate=37.76783916533912 for layer 66, Z=6.601 [PrintingService.cs@1524] -06/14/2026 18:33:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 49, island count 5 [PrintingService.cs@1569] -06/14/2026 18:33:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 67, start=0, count=232, Z=6.701 [PrintingService.cs@1518] -06/14/2026 18:33:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/14/2026 18:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1921.0990277, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.465999908309113, Elapsed = 00:32:01.1190865, TimeTotal = 06:18:12.1699422, Remaining = 05:46:11.0508557, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:43.1096352, WeightTotalEstimate = 01:11:43.1096352, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:49.6498834, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:01.1190865, HeatingEstimate = 00:37:58.9009723, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:10.2113264, WeightEstimate = 01:11:43.1096352 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.465999908309113;StartedAtUtc;00:32:01.1190865;06:18:12.1699422;05:46:11.0508557;False;232;0;0;00:00:00;01:11:43.1096352;01:11:43.1096352;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:49.6498834;00:00:00;02:00:00;00:32:01.1190865;00:37:58.9009723;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:10.2113264 [PrintingService.cs@1918] -06/14/2026 18:33:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1922.0988784, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.47040587769594, Elapsed = 00:32:02.1188928, TimeTotal = 06:18:12.1698978, Remaining = 05:46:10.0510050, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:43.1096352, WeightTotalEstimate = 01:11:43.1096352, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:49.6498834, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:02.1188928, HeatingEstimate = 00:37:57.9011216, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:10.2113264, WeightEstimate = 01:11:43.1096352 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.47040587769594;StartedAtUtc;00:32:02.1188928;06:18:12.1698978;05:46:10.0510050;False;232;0;0;00:00:00;01:11:43.1096352;01:11:43.1096352;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:49.6498834;00:00:00;02:00:00;00:32:02.1188928;00:37:57.9011216;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:10.2113264 [PrintingService.cs@1918] -06/14/2026 18:33:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1923.1002215, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.474818593218101, Elapsed = 00:32:03.1202335, TimeTotal = 06:18:12.1698954, Remaining = 05:46:09.0496619, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:43.1096352, WeightTotalEstimate = 01:11:43.1096352, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:49.6498834, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:03.1202335, HeatingEstimate = 00:37:56.8997785, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:10.2113264, WeightEstimate = 01:11:43.1096352 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.474818593218101;StartedAtUtc;00:32:03.1202335;06:18:12.1698954;05:46:09.0496619;False;232;0;0;00:00:00;01:11:43.1096352;01:11:43.1096352;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:49.6498834;00:00:00;02:00:00;00:32:03.1202335;00:37:56.8997785;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:10.2113264 [PrintingService.cs@1918] -06/14/2026 18:33:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1746737. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:33:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/14/2026 18:33:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/14/2026 18:33:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1924.0988604, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.479219423717108, Elapsed = 00:32:04.1188779, TimeTotal = 06:18:12.1699009, Remaining = 05:46:08.0510230, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:43.1096352, WeightTotalEstimate = 01:11:43.1096352, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:49.6498834, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:04.1188779, HeatingEstimate = 00:37:55.9011396, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:10.2113264, WeightEstimate = 01:11:43.1096352 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.479219423717108;StartedAtUtc;00:32:04.1188779;06:18:12.1699009;05:46:08.0510230;False;232;0;0;00:00:00;01:11:43.1096352;01:11:43.1096352;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:49.6498834;00:00:00;02:00:00;00:32:04.1188779;00:37:55.9011396;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:10.2113264 [PrintingService.cs@1918] -06/14/2026 18:33:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1925.0994473, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 14/06/2026 17:01:18, Progress = 8.483628819718023, Elapsed = 00:32:05.1194656, TimeTotal = 06:18:12.1699017, Remaining = 05:46:07.0504361, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:43.1096352, WeightTotalEstimate = 01:11:43.1096352, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:49.6498834, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:05.1194656, HeatingEstimate = 00:37:54.9005527, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:23:10.2113264, WeightEstimate = 01:11:43.1096352 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 23:19:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/14/2026 18:33:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 8.483628819718023;StartedAtUtc;00:32:05.1194656;06:18:12.1699017;05:46:07.0504361;False;232;0;0;00:00:00;01:11:43.1096352;01:11:43.1096352;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:49.6498834;00:00:00;02:00:00;00:32:05.1194656;00:37:54.9005527;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:23:10.2113264 [PrintingService.cs@1918] -06/14/2026 18:33:00 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] -06/14/2026 18:33:00 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] -06/14/2026 18:33:00 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] -06/14/2026 18:33:00 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 06/14/2026 17:33:00 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] -06/14/2026 18:33:01 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/14/2026 18:33:01 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] -06/14/2026 18:33:01 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] -06/14/2026 18:33:01 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] -06/14/2026 18:33:01 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=f757c619-9e34-48c2-9dea-e34963859303) -06/14/2026 18:33:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] -06/14/2026 18:33:01 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... -Waiting for exit signal... -Successfully set permissions. -06/14/2026 18:33:01 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] -06/14/2026 18:33:01 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] -06/14/2026 18:33:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/14/2026 18:33:01 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ -06/14/2026 18:33:01 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] -06/14/2026 18:33:02 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] -06/14/2026 18:33:03 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] -06/14/2026 18:33:03 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] -06/14/2026 18:33:03 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/14/2026 18:33:03 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/14/2026 18:33:03 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] -06/14/2026 18:33:03 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] -06/14/2026 18:33:03 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 -06/14/2026 18:33:03 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. -06/14/2026 18:33:03 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 -06/14/2026 18:33:03 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current -06/14/2026 18:33:03 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] -06/14/2026 18:33:03 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: -/home/ppak/SLS4All/Current/appsettings.toml -/home/ppak/SLS4All/Current/appsettings.Inova.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml -/home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] -06/14/2026 18:33:07 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNMA7BUHC7PU, RemoteIpAddress = 127.0.0.1, RemotePort = 44564, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmU3epDih7zW1ClcZpcje0dPgjmOjZaY9cqit1s2_e-Qc4qijz25ENdhlgu_1bzzWv5WhQhwdB0z8OTS3qLEROx5KnedUPBDNDM0PRtgopFmunfLumycsGNHq1NCwfQ4H9oecAHHGeEsbl7uWVEtBO3TerjvG35MoIkNZ9LfcnFVVayTbAMx803h9aiHodrBnIRqXD5S6hUEcNwLbCAa7IpSi4Rj--GSAX-QTiI2H9Y0-Efz4cDnZ9DWJNR_yZiIxurYICBVImYWcRui0GuopkgDuafNahWzioSaNmXXkJnxYVdDpi7DRBIOCVUVegyUqZq6OoKeX7WeRtrbYIkjZFTmvIgnSrxhK7G3yqqbwM-m4HBQELYsofwo26dE3eaQnSyWAVSDGMVqC5nS0gSkGDf2uieLtXkC7BJp10uXNQz0X3mnf5oMrmu5vak4jIXr60wFjVsoxeCekq17O2FeF3CbkPmDbqziMa4pWQmrsHFfZcsW2yTgp-m4p1yxUomf3U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmU3epDih7zW1ClcZpcje0dPgjmOjZaY9cqit1s2_e-Qc4qijz25ENdhlgu_1bzzWv5WhQhwdB0z8OTS3qLEROx5KnedUPBDNDM0PRtgopFmunfLumycsGNHq1NCwfQ4H9oecAHHGeEsbl7uWVEtBO3TerjvG35MoIkNZ9LfcnFVVayTbAMx803h9aiHodrBnIRqXD5S6hUEcNwLbCAa7IpSi4Rj--GSAX-QTiI2H9Y0-Efz4cDnZ9DWJNR_yZiIxurYICBVImYWcRui0GuopkgDuafNahWzioSaNmXXkJnxYVdDpi7DRBIOCVUVegyUqZq6OoKeX7WeRtrbYIkjZFTmvIgnSrxhK7G3yqqbwM-m4HBQELYsofwo26dE3eaQnSyWAVSDGMVqC5nS0gSkGDf2uieLtXkC7BJp10uXNQz0X3mnf5oMrmu5vak4jIXr60wFjVsoxeCekq17O2FeF3CbkPmDbqziMa4pWQmrsHFfZcsW2yTgp-m4p1yxUomf3U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] -06/14/2026 18:33:08 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNMA7BUHC7PU, RemoteIpAddress = 127.0.0.1, RemotePort = 44564, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmU3epDih7zW1ClcZpcje0dPgjmOjZaY9cqit1s2_e-Qc4qijz25ENdhlgu_1bzzWv5WhQhwdB0z8OTS3qLEROx5KnedUPBDNDM0PRtgopFmunfLumycsGNHq1NCwfQ4H9oecAHHGeEsbl7uWVEtBO3TerjvG35MoIkNZ9LfcnFVVayTbAMx803h9aiHodrBnIRqXD5S6hUEcNwLbCAa7IpSi4Rj--GSAX-QTiI2H9Y0-Efz4cDnZ9DWJNR_yZiIxurYICBVImYWcRui0GuopkgDuafNahWzioSaNmXXkJnxYVdDpi7DRBIOCVUVegyUqZq6OoKeX7WeRtrbYIkjZFTmvIgnSrxhK7G3yqqbwM-m4HBQELYsofwo26dE3eaQnSyWAVSDGMVqC5nS0gSkGDf2uieLtXkC7BJp10uXNQz0X3mnf5oMrmu5vak4jIXr60wFjVsoxeCekq17O2FeF3CbkPmDbqziMa4pWQmrsHFfZcsW2yTgp-m4p1yxUomf3U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmU3epDih7zW1ClcZpcje0dPgjmOjZaY9cqit1s2_e-Qc4qijz25ENdhlgu_1bzzWv5WhQhwdB0z8OTS3qLEROx5KnedUPBDNDM0PRtgopFmunfLumycsGNHq1NCwfQ4H9oecAHHGeEsbl7uWVEtBO3TerjvG35MoIkNZ9LfcnFVVayTbAMx803h9aiHodrBnIRqXD5S6hUEcNwLbCAa7IpSi4Rj--GSAX-QTiI2H9Y0-Efz4cDnZ9DWJNR_yZiIxurYICBVImYWcRui0GuopkgDuafNahWzioSaNmXXkJnxYVdDpi7DRBIOCVUVegyUqZq6OoKeX7WeRtrbYIkjZFTmvIgnSrxhK7G3yqqbwM-m4HBQELYsofwo26dE3eaQnSyWAVSDGMVqC5nS0gSkGDf2uieLtXkC7BJp10uXNQz0X3mnf5oMrmu5vak4jIXr60wFjVsoxeCekq17O2FeF3CbkPmDbqziMa4pWQmrsHFfZcsW2yTgp-m4p1yxUomf3U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] -06/14/2026 18:33:08 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNMA7BUHC7PU, RemoteIpAddress = 127.0.0.1, RemotePort = 44564, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmU3epDih7zW1ClcZpcje0dPgjmOjZaY9cqit1s2_e-Qc4qijz25ENdhlgu_1bzzWv5WhQhwdB0z8OTS3qLEROx5KnedUPBDNDM0PRtgopFmunfLumycsGNHq1NCwfQ4H9oecAHHGeEsbl7uWVEtBO3TerjvG35MoIkNZ9LfcnFVVayTbAMx803h9aiHodrBnIRqXD5S6hUEcNwLbCAa7IpSi4Rj--GSAX-QTiI2H9Y0-Efz4cDnZ9DWJNR_yZiIxurYICBVImYWcRui0GuopkgDuafNahWzioSaNmXXkJnxYVdDpi7DRBIOCVUVegyUqZq6OoKeX7WeRtrbYIkjZFTmvIgnSrxhK7G3yqqbwM-m4HBQELYsofwo26dE3eaQnSyWAVSDGMVqC5nS0gSkGDf2uieLtXkC7BJp10uXNQz0X3mnf5oMrmu5vak4jIXr60wFjVsoxeCekq17O2FeF3CbkPmDbqziMa4pWQmrsHFfZcsW2yTgp-m4p1yxUomf3U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmU3epDih7zW1ClcZpcje0dPgjmOjZaY9cqit1s2_e-Qc4qijz25ENdhlgu_1bzzWv5WhQhwdB0z8OTS3qLEROx5KnedUPBDNDM0PRtgopFmunfLumycsGNHq1NCwfQ4H9oecAHHGeEsbl7uWVEtBO3TerjvG35MoIkNZ9LfcnFVVayTbAMx803h9aiHodrBnIRqXD5S6hUEcNwLbCAa7IpSi4Rj--GSAX-QTiI2H9Y0-Efz4cDnZ9DWJNR_yZiIxurYICBVImYWcRui0GuopkgDuafNahWzioSaNmXXkJnxYVdDpi7DRBIOCVUVegyUqZq6OoKeX7WeRtrbYIkjZFTmvIgnSrxhK7G3yqqbwM-m4HBQELYsofwo26dE3eaQnSyWAVSDGMVqC5nS0gSkGDf2uieLtXkC7BJp10uXNQz0X3mnf5oMrmu5vak4jIXr60wFjVsoxeCekq17O2FeF3CbkPmDbqziMa4pWQmrsHFfZcsW2yTgp-m4p1yxUomf3U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] -06/14/2026 18:33:08 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] -06/14/2026 18:33:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] -06/14/2026 18:33:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] -06/14/2026 18:33:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] -06/14/2026 18:33:09 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] -06/14/2026 18:33:09 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/2e8a2395-978d-488c-9110-9cc02ec5fb16.sh [SystemPrinterHostname.cs@140] -06/14/2026 18:33:09 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] -06/14/2026 18:33:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] -06/14/2026 18:33:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] -06/14/2026 18:33:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/14/2026 18:33:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/14/2026 18:33:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] -06/14/2026 18:33:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] -06/14/2026 18:33:10 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] -06/14/2026 18:33:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] -06/14/2026 18:33:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] -06/14/2026 18:33:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] -06/14/2026 18:33:13 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! -06/14/2026 18:33:13 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3538554. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=377, gen1=73, gen2=10, LatencyMode=Interactive, FreeMemory=6522912768, Live=279117176, HeapSizeBytes=282294216, FragmentedBytes=4348848, TotalCommittedBytes=313458688, PinnedObjectsCount=24, MemoryLoadBytes=2028145213, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/14/2026 18:33:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/14/2026 18:33:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627806. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0665993. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/14/2026 18:33:14 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/14/2026 18:33:14 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] -06/14/2026 18:33:14 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] -06/14/2026 18:33:18 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] -06/15/2026 19:35:05 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/15/2026 19:35:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0953781 ~ 5.99 samples/sec, 1 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:36:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0809461 ~ 6.08 samples/sec, 1 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:37:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0533730 ~ 6.08 samples/sec, 1 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:38:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0684681 ~ 6.08 samples/sec, 1 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:38:34 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid +06/28/2026 05:59:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 82.80920842300287;StartedAtUtc;09:27:50.3497281;11:25:43.1897212;01:57:52.8399931;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:32:51.5007897;02:02:06.8123077;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 05:59:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=151.32117638221155,printChamber1=151.32117638221155,printChamber2=151.32117638221155,printChamber3=151.32117638221155,printChamber4=151.32117638221155,surface=151.32117638221155 [ControlledHeating.cs@169] +06/28/2026 05:59:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 151.32117638221155. Used = 151.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 05:59:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1213559 ~ 6.02 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:00:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1013301 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:01:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2057.2178122, PhaseTotal = 8426.0639373, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 82.90298785252966, Elapsed = 09:29:16.0706557, TimeTotal = 11:26:40.0478396, Remaining = 01:57:23.9771839, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:34:17.2217173, CoolingEstimate = 02:01:37.9494985, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:58:25. coolingEstimate=02:01:37.9494985 [PrintingService.cs@1912] +06/28/2026 06:01:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 82.90298785252966;StartedAtUtc;09:29:16.0706557;11:26:40.0478396;01:57:23.9771839;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:34:17.2217173;02:01:37.9494985;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:01:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=150.32117638221155,printChamber1=150.32117638221155,printChamber2=150.32117638221155,printChamber3=150.32117638221155,printChamber4=150.32117638221155,surface=150.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:01:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 150.32117638221155. Used = 150.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:01:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0461166 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:02:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:02:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:02:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:02:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:02:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:02:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:02:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2142.9369402, PhaseTotal = 8426.0687796, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 83.06047508587616, Elapsed = 09:30:41.7891788, TimeTotal = 11:27:05.1304166, Remaining = 01:56:23.3412378, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:35:42.9402404, CoolingEstimate = 02:00:37.3135524, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:58:50. coolingEstimate=02:00:37.3135524 [PrintingService.cs@1912] +06/28/2026 06:02:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 83.06047508587616;StartedAtUtc;09:30:41.7891788;11:27:05.1304166;01:56:23.3412378;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:35:42.9402404;02:00:37.3135524;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:02:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=149.32117638221155,printChamber1=149.32117638221155,printChamber2=149.32117638221155,printChamber3=149.32117638221155,printChamber4=149.32117638221155,surface=149.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:02:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 149.32117638221155. Used = 149.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:02:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.1012592 ~ 5.97 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:03:40 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:03:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1443142 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:03:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2228.6529436, PhaseTotal = 8426.0704972, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 83.3549117453795, Elapsed = 09:32:07.5051622, TimeTotal = 11:26:22.3424000, Remaining = 01:54:14.8372378, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:37:08.6562238, CoolingEstimate = 01:58:28.8095524, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:58:08. coolingEstimate=01:58:28.8095524 [PrintingService.cs@1912] +06/28/2026 06:03:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 83.3549117453795;StartedAtUtc;09:32:07.5051622;11:26:22.3424000;01:54:14.8372378;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:37:08.6562238;01:58:28.8095524;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:03:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=148.32117638221155,printChamber1=148.32117638221155,printChamber2=148.32117638221155,printChamber3=148.32117638221155,printChamber4=148.32117638221155,surface=148.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:03:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 148.32117638221155. Used = 148.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:04:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0294338 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:05:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2314.3684349, PhaseTotal = 8426.0717028, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 83.48342076404137, Elapsed = 09:33:33.2207022, TimeTotal = 11:27:01.6226734, Remaining = 01:53:28.4019712, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:38:34.3717638, CoolingEstimate = 01:57:42.3742858, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:58:47. coolingEstimate=01:57:42.3742858 [PrintingService.cs@1912] +06/28/2026 06:05:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 83.48342076404137;StartedAtUtc;09:33:33.2207022;11:27:01.6226734;01:53:28.4019712;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:38:34.3717638;01:57:42.3742858;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:05:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=147.32117638221155,printChamber1=147.32117638221155,printChamber2=147.32117638221155,printChamber3=147.32117638221155,printChamber4=147.32117638221155,surface=147.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:05:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 147.32117638221155. Used = 147.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:05:22 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:05:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1595452 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:06:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0906298 ~ 6.02 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:06:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2400.0887203, PhaseTotal = 8426.0777025, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 83.66750442775562, Elapsed = 09:34:58.9409394, TimeTotal = 11:27:13.3810783, Remaining = 01:52:14.4401389, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:40:00.0920010, CoolingEstimate = 01:56:28.4124535, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:58:59. coolingEstimate=01:56:28.4124535 [PrintingService.cs@1912] +06/28/2026 06:06:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 83.66750442775562;StartedAtUtc;09:34:58.9409394;11:27:13.3810783;01:52:14.4401389;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:40:00.0920010;01:56:28.4124535;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:06:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=146.32117638221155,printChamber1=146.32117638221155,printChamber2=146.32117638221155,printChamber3=146.32117638221155,printChamber4=146.32117638221155,surface=146.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:06:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 146.32117638221155. Used = 146.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:07:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:07:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:07:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:07:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:07:17 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (110 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:07:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:07:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:07:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1629443 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:08:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2485.804942, PhaseTotal = 8426.0796385, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 83.83904612368991, Elapsed = 09:36:24.6576283, TimeTotal = 11:27:31.2537145, Remaining = 01:51:06.5960862, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:41:25.8086899, CoolingEstimate = 01:55:20.5684008, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:59:17. coolingEstimate=01:55:20.5684008 [PrintingService.cs@1912] +06/28/2026 06:08:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 83.83904612368991;StartedAtUtc;09:36:24.6576283;11:27:31.2537145;01:51:06.5960862;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:41:25.8086899;01:55:20.5684008;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:08:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=145.32117638221155,printChamber1=145.32117638221155,printChamber2=145.32117638221155,printChamber3=145.32117638221155,printChamber4=145.32117638221155,surface=145.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:08:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 145.32117638221155. Used = 145.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:08:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1025396 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:08:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:09:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2571.5280468, PhaseTotal = 8426.0884576, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 84.03191178053156, Elapsed = 09:37:50.3805624, TimeTotal = 11:27:38.5883479, Remaining = 01:49:48.2077855, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:42:51.5316240, CoolingEstimate = 01:54:02.1801001, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:59:24. coolingEstimate=01:54:02.1801001 [PrintingService.cs@1912] +06/28/2026 06:09:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 84.03191178053156;StartedAtUtc;09:37:50.3805624;11:27:38.5883479;01:49:48.2077855;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:42:51.5316240;01:54:02.1801001;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:09:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=144.32117638221155,printChamber1=144.32117638221155,printChamber2=144.32117638221155,printChamber3=144.32117638221155,printChamber4=144.32117638221155,surface=144.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:09:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 144.32117638221155. Used = 144.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:09:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1197114 ~ 6.02 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:10:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (27 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:10:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0144663 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:11:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2657.2486922, PhaseTotal = 8426.0948173, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 84.22101270008605, Elapsed = 09:39:16.1014317, TimeTotal = 11:27:47.7315523, Remaining = 01:48:31.6301206, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:44:17.2524933, CoolingEstimate = 01:52:45.6024352, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 06:59:33. coolingEstimate=01:52:45.6024352 [PrintingService.cs@1912] +06/28/2026 06:11:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 84.22101270008605;StartedAtUtc;09:39:16.1014317;11:27:47.7315523;01:48:31.6301206;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:44:17.2524933;01:52:45.6024352;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:11:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=143.32117638221155,printChamber1=143.32117638221155,printChamber2=143.32117638221155,printChamber3=143.32117638221155,printChamber4=143.32117638221155,surface=143.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:11:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 143.32117638221155. Used = 143.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:11:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1454250 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:12:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:12:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:12:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:12:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:12:17 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (51 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:12:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:12:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2742.9648361, PhaseTotal = 8426.0966755, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 84.34626587498963, Elapsed = 09:40:41.8176926, TimeTotal = 11:28:28.0737258, Remaining = 01:47:46.2560332, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:45:42.9687542, CoolingEstimate = 01:52:00.2283478, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:00:13. coolingEstimate=01:52:00.2283478 [PrintingService.cs@1912] +06/28/2026 06:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 84.34626587498963;StartedAtUtc;09:40:41.8176926;11:28:28.0737258;01:47:46.2560332;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:45:42.9687542;01:52:00.2283478;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:12:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=142.32117638221155,printChamber1=142.32117638221155,printChamber2=142.32117638221155,printChamber3=142.32117638221155,printChamber4=142.32117638221155,surface=142.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:12:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 142.32117638221155. Used = 142.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:12:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0214997 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:13:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1349806 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:13:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2828.6849987, PhaseTotal = 8426.1025523, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 84.54342567623756, Elapsed = 09:42:07.5378239, TimeTotal = 11:28:33.1329190, Remaining = 01:46:25.5950951, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:47:08.6888855, CoolingEstimate = 01:50:39.5674097, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:00:18. coolingEstimate=01:50:39.5674097 [PrintingService.cs@1912] +06/28/2026 06:13:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 84.54342567623756;StartedAtUtc;09:42:07.5378239;11:28:33.1329190;01:46:25.5950951;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:47:08.6888855;01:50:39.5674097;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:13:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=141.32117638221155,printChamber1=141.32117638221155,printChamber2=141.32117638221155,printChamber3=141.32117638221155,printChamber4=141.32117638221155,surface=141.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:13:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 141.32117638221155. Used = 141.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:14:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0897639 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:15:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 2914.40521, PhaseTotal = 8426.1084779, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 84.74910796142655, Elapsed = 09:43:33.2574376, TimeTotal = 11:28:34.0129493, Remaining = 01:45:00.7555117, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:48:34.4084992, CoolingEstimate = 01:49:14.7278263, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:00:19. coolingEstimate=01:49:14.7278263 [PrintingService.cs@1912] +06/28/2026 06:15:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 84.74910796142655;StartedAtUtc;09:43:33.2574376;11:28:34.0129493;01:45:00.7555117;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:48:34.4084992;01:49:14.7278263;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:15:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=140.32117638221155,printChamber1=140.32117638221155,printChamber2=140.32117638221155,printChamber3=140.32117638221155,printChamber4=140.32117638221155,surface=140.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:15:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 140.32117638221155. Used = 140.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:15:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1062830 ~ 6.02 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:16:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0387302 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:16:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3000.1204756, PhaseTotal = 8426.1094578, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 84.97124651294268, Elapsed = 09:44:58.9726946, TimeTotal = 11:28:26.8821925, Remaining = 01:43:27.9094979, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:50:00.1237562, CoolingEstimate = 01:47:41.8818125, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:00:12. coolingEstimate=01:47:41.8818125 [PrintingService.cs@1912] +06/28/2026 06:16:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 84.97124651294268;StartedAtUtc;09:44:58.9726946;11:28:26.8821925;01:43:27.9094979;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:50:00.1237562;01:47:41.8818125;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:16:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=139.32117638221155,printChamber1=139.32117638221155,printChamber2=139.32117638221155,printChamber3=139.32117638221155,printChamber4=139.32117638221155,surface=139.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:16:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 139.32117638221155. Used = 139.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:17:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:17:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:17:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:17:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:17:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:17:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:17:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0916359 ~ 5.97 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:18:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3085.8333954, PhaseTotal = 8426.1080919, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 85.11981706492216, Elapsed = 09:46:24.6859091, TimeTotal = 11:28:55.4811163, Remaining = 01:42:30.7952072, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:51:25.8369707, CoolingEstimate = 01:46:44.7675218, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:00:41. coolingEstimate=01:46:44.7675218 [PrintingService.cs@1912] +06/28/2026 06:18:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.11981706492216;StartedAtUtc;09:46:24.6859091;11:28:55.4811163;01:42:30.7952072;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:51:25.8369707;01:46:44.7675218;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:18:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=138.32117638221155,printChamber1=138.32117638221155,printChamber2=138.32117638221155,printChamber3=138.32117638221155,printChamber4=138.32117638221155,surface=138.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:18:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 138.32117638221155. Used = 138.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:18:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0669969 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:19:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3171.5567455, PhaseTotal = 8426.1171563, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 85.3450528088431, Elapsed = 09:47:50.4100668, TimeTotal = 11:28:46.8360684, Remaining = 01:40:56.4260016, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:52:51.5611284, CoolingEstimate = 01:45:10.3983162, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:00:32. coolingEstimate=01:45:10.3983162 [PrintingService.cs@1912] +06/28/2026 06:19:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.3450528088431;StartedAtUtc;09:47:50.4100668;11:28:46.8360684;01:40:56.4260016;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:52:51.5611284;01:45:10.3983162;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:19:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=137.32117638221155,printChamber1=137.32117638221155,printChamber2=137.32117638221155,printChamber3=137.32117638221155,printChamber4=137.32117638221155,surface=137.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:19:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 137.32117638221155. Used = 137.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:19:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1082761 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:20:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0399447 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3257.2729555, PhaseTotal = 8426.1190806, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 85.54088100215009, Elapsed = 09:49:16.1252816, TimeTotal = 11:28:52.4306079, Remaining = 01:39:36.3053263, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:54:17.2763432, CoolingEstimate = 01:43:50.2776409, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:00:38. coolingEstimate=01:43:50.2776409 [PrintingService.cs@1912] +06/28/2026 06:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.54088100215009;StartedAtUtc;09:49:16.1252816;11:28:52.4306079;01:39:36.3053263;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:54:17.2763432;01:43:50.2776409;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:21:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=136.32117638221155,printChamber1=136.32117638221155,printChamber2=136.32117638221155,printChamber3=136.32117638221155,printChamber4=136.32117638221155,surface=136.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:21:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 136.32117638221155. Used = 136.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:21:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:21:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1316918 ~ 6.02 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:22:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:22:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:22:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:22:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:22:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:22:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:22:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3342.9892774, PhaseTotal = 8426.1211168, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 85.68941025834154, Elapsed = 09:50:41.8416038, TimeTotal = 11:29:20.8186787, Remaining = 01:38:38.9770749, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:55:42.9926654, CoolingEstimate = 01:42:52.9493895, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:01:06. coolingEstimate=01:42:52.9493895 [PrintingService.cs@1912] +06/28/2026 06:22:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.68941025834154;StartedAtUtc;09:50:41.8416038;11:29:20.8186787;01:38:38.9770749;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:55:42.9926654;01:42:52.9493895;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:22:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=135.32117638221155,printChamber1=135.32117638221155,printChamber2=135.32117638221155,printChamber3=135.32117638221155,printChamber4=135.32117638221155,surface=135.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:22:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 135.32117638221155. Used = 135.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:22:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0970603 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:23:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0844590 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:23:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3428.7047892, PhaseTotal = 8426.1223428, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 85.89240861451403, Elapsed = 09:52:07.5577009, TimeTotal = 11:29:22.8611352, Remaining = 01:37:15.3034343, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:57:08.7087625, CoolingEstimate = 01:41:29.2757489, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:01:08. coolingEstimate=01:41:29.2757489 [PrintingService.cs@1912] +06/28/2026 06:23:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.89240861451403;StartedAtUtc;09:52:07.5577009;11:29:22.8611352;01:37:15.3034343;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:57:08.7087625;01:41:29.2757489;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:23:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=134.32117638221155,printChamber1=134.32117638221155,printChamber2=134.32117638221155,printChamber3=134.32117638221155,printChamber4=134.32117638221155,surface=134.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:23:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 134.32117638221155. Used = 134.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:24:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0780720 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:25:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3514.4207242, PhaseTotal = 8426.1239921, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 86.0465656926817, Elapsed = 09:53:33.2729433, TimeTotal = 11:29:48.3722803, Remaining = 01:36:15.0993370, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 00:58:34.4240049, CoolingEstimate = 01:40:29.0716516, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:01:34. coolingEstimate=01:40:29.0716516 [PrintingService.cs@1912] +06/28/2026 06:25:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.0465656926817;StartedAtUtc;09:53:33.2729433;11:29:48.3722803;01:36:15.0993370;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;00:58:34.4240049;01:40:29.0716516;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:25:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=133.32117638221155,printChamber1=133.32117638221155,printChamber2=133.32117638221155,printChamber3=133.32117638221155,printChamber4=133.32117638221155,surface=133.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:25:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 133.32117638221155. Used = 133.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:25:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0037605 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:26:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0248914 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:26:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3600.1374953, PhaseTotal = 8426.1264775, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 86.24090627833687, Elapsed = 09:54:58.9897198, TimeTotal = 11:29:54.4974147, Remaining = 01:34:55.5076949, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:00:00.1407814, CoolingEstimate = 01:39:09.4800095, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:01:40. coolingEstimate=01:39:09.4800095 [PrintingService.cs@1912] +06/28/2026 06:26:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.24090627833687;StartedAtUtc;09:54:58.9897198;11:29:54.4974147;01:34:55.5076949;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:00:00.1407814;01:39:09.4800095;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:26:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=132.32117638221155,printChamber1=132.32117638221155,printChamber2=132.32117638221155,printChamber3=132.32117638221155,printChamber4=132.32117638221155,surface=132.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:26:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 132.32117638221155. Used = 132.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:27:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:27:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:27:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:27:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:27:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:27:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:27:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0202144 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:28:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3685.8519254, PhaseTotal = 8426.1266219, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 86.44158036880552, Elapsed = 09:56:24.7042140, TimeTotal = 11:29:57.5589772, Remaining = 01:33:32.8547632, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:01:25.8552756, CoolingEstimate = 01:37:46.8270778, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:01:43. coolingEstimate=01:37:46.8270778 [PrintingService.cs@1912] +06/28/2026 06:28:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.44158036880552;StartedAtUtc;09:56:24.7042140;11:29:57.5589772;01:33:32.8547632;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:01:25.8552756;01:37:46.8270778;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:28:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=131.32117638221155,printChamber1=131.32117638221155,printChamber2=131.32117638221155,printChamber3=131.32117638221155,printChamber4=131.32117638221155,surface=131.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:28:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 131.32117638221155. Used = 131.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:28:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0560131 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:29:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3771.5688573, PhaseTotal = 8426.1292681, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 86.59248141532179, Elapsed = 09:57:50.4210951, TimeTotal = 11:30:24.4060325, Remaining = 01:32:33.9849374, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:02:51.5721567, CoolingEstimate = 01:36:47.9572520, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:02:10. coolingEstimate=01:36:47.9572520 [PrintingService.cs@1912] +06/28/2026 06:29:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.59248141532179;StartedAtUtc;09:57:50.4210951;11:30:24.4060325;01:32:33.9849374;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:02:51.5721567;01:36:47.9572520;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:29:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=130.32117638221155,printChamber1=130.32117638221155,printChamber2=130.32117638221155,printChamber3=130.32117638221155,printChamber4=130.32117638221155,surface=130.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:29:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 130.32117638221155. Used = 130.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:29:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.0874998 ~ 5.92 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:30:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1028678 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:31:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3857.2852188, PhaseTotal = 8426.1313439, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 86.7500862132728, Elapsed = 09:59:16.1374395, TimeTotal = 11:30:47.9558569, Remaining = 01:31:31.8184174, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:04:17.2885011, CoolingEstimate = 01:35:45.7907320, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:02:33. coolingEstimate=01:35:45.7907320 [PrintingService.cs@1912] +06/28/2026 06:31:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.7500862132728;StartedAtUtc;09:59:16.1374395;11:30:47.9558569;01:31:31.8184174;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:04:17.2885011;01:35:45.7907320;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:31:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=129.32117638221155,printChamber1=129.32117638221155,printChamber2=129.32117638221155,printChamber3=129.32117638221155,printChamber4=129.32117638221155,surface=129.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:31:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.32117638221155. Used = 129.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:31:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0780899 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:32:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:32:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:32:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:32:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:32:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:32:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:32:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3943.0000347, PhaseTotal = 8426.1318741, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 86.98110015823825, Elapsed = 10:00:41.8523312, TimeTotal = 11:30:36.4181019, Remaining = 01:29:54.5657707, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:05:43.0033928, CoolingEstimate = 01:34:08.5380853, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:02:22. coolingEstimate=01:34:08.5380853 [PrintingService.cs@1912] +06/28/2026 06:32:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.98110015823825;StartedAtUtc;10:00:41.8523312;11:30:36.4181019;01:29:54.5657707;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:05:43.0033928;01:34:08.5380853;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:32:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=128.32117638221155,printChamber1=128.32117638221155,printChamber2=128.32117638221155,printChamber3=128.32117638221155,printChamber4=128.32117638221155,surface=128.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:32:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.32117638221155. Used = 128.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:32:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1015037 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:33:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0497182 ~ 5.96 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:33:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4028.7167443, PhaseTotal = 8426.1342979, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 87.10776440622051, Elapsed = 10:02:07.5695011, TimeTotal = 11:31:14.5685960, Remaining = 01:29:06.9990949, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:07:08.7205627, CoolingEstimate = 01:33:20.9714095, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:03:00. coolingEstimate=01:33:20.9714095 [PrintingService.cs@1912] +06/28/2026 06:33:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.10776440622051;StartedAtUtc;10:02:07.5695011;11:31:14.5685960;01:29:06.9990949;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:07:08.7205627;01:33:20.9714095;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:33:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=127.32117638221155,printChamber1=127.32117638221155,printChamber2=127.32117638221155,printChamber3=127.32117638221155,printChamber4=127.32117638221155,surface=127.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:33:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.32117638221155. Used = 127.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:34:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0396945 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:35:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4114.4321935, PhaseTotal = 8426.1354614, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 87.29824061717679, Elapsed = 10:03:33.2844324, TimeTotal = 11:31:22.2614710, Remaining = 01:27:48.9770386, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:08:34.4354940, CoolingEstimate = 01:32:02.9493532, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:03:08. coolingEstimate=01:32:02.9493532 [PrintingService.cs@1912] +06/28/2026 06:35:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.29824061717679;StartedAtUtc;10:03:33.2844324;11:31:22.2614710;01:27:48.9770386;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:08:34.4354940;01:32:02.9493532;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:35:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=126.32117638221155,printChamber1=126.32117638221155,printChamber2=126.32117638221155,printChamber3=126.32117638221155,printChamber4=126.32117638221155,surface=126.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:35:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.32117638221155. Used = 126.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:35:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1267882 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:36:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0730128 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:36:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4200.156467, PhaseTotal = 8426.1454492, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 87.49561746322986, Elapsed = 10:04:59.0087488, TimeTotal = 11:31:26.6593336, Remaining = 01:26:27.6505848, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:10:00.1598104, CoolingEstimate = 01:30:41.6228994, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:03:12. coolingEstimate=01:30:41.6228994 [PrintingService.cs@1912] +06/28/2026 06:36:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.49561746322986;StartedAtUtc;10:04:59.0087488;11:31:26.6593336;01:26:27.6505848;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:10:00.1598104;01:30:41.6228994;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:36:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=125.32117638221155,printChamber1=125.32117638221155,printChamber2=125.32117638221155,printChamber3=125.32117638221155,printChamber4=125.32117638221155,surface=125.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:36:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.32117638221155. Used = 125.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:37:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:37:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:37:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:37:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:37:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:37:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:37:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0159913 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:38:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4285.8722588, PhaseTotal = 8426.1469553, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 87.64615895902416, Elapsed = 10:06:24.7249146, TimeTotal = 11:31:53.1996048, Remaining = 01:25:28.4746902, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:11:25.8759762, CoolingEstimate = 01:29:42.4470048, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:03:38. coolingEstimate=01:29:42.4470048 [PrintingService.cs@1912] +06/28/2026 06:38:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.64615895902416;StartedAtUtc;10:06:24.7249146;11:31:53.1996048;01:25:28.4746902;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:11:25.8759762;01:29:42.4470048;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:38:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=124.32117638221155,printChamber1=124.32117638221155,printChamber2=124.32117638221155,printChamber3=124.32117638221155,printChamber4=124.32117638221155,surface=124.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:38:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.32117638221155. Used = 124.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:38:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0718436 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:39:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4371.5880769, PhaseTotal = 8426.1484877, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 87.79169819805163, Elapsed = 10:07:50.4402982, TimeTotal = 11:32:22.0148451, Remaining = 01:24:31.5745469, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:12:51.5913598, CoolingEstimate = 01:28:45.5468615, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:04:07. coolingEstimate=01:28:45.5468615 [PrintingService.cs@1912] +06/28/2026 06:39:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.79169819805163;StartedAtUtc;10:07:50.4402982;11:32:22.0148451;01:24:31.5745469;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:12:51.5913598;01:28:45.5468615;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:39:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=123.32117638221155,printChamber1=123.32117638221155,printChamber2=123.32117638221155,printChamber3=123.32117638221155,printChamber4=123.32117638221155,surface=123.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:39:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.32117638221155. Used = 123.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:39:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0866866 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:40:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0472534 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:41:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4457.3037235, PhaseTotal = 8426.1498486, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 87.95240029576713, Elapsed = 10:09:16.1559547, TimeTotal = 11:32:43.5682844, Remaining = 01:23:27.4123297, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:14:17.3070163, CoolingEstimate = 01:27:41.3846443, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:04:29. coolingEstimate=01:27:41.3846443 [PrintingService.cs@1912] +06/28/2026 06:41:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.95240029576713;StartedAtUtc;10:09:16.1559547;11:32:43.5682844;01:23:27.4123297;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:14:17.3070163;01:27:41.3846443;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:41:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=122.32117638221155,printChamber1=122.32117638221155,printChamber2=122.32117638221155,printChamber3=122.32117638221155,printChamber4=122.32117638221155,surface=122.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:41:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.32117638221155. Used = 122.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:41:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0723469 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:41:47 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 06:41:47 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:41:47 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:42:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:42:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:42:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:42:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:42:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:42:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:42:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4543.0238967, PhaseTotal = 8426.1557361, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 88.14337540803685, Elapsed = 10:10:41.8761211, TimeTotal = 11:32:50.7657569, Remaining = 01:22:08.8896358, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:15:43.0271827, CoolingEstimate = 01:26:22.8619504, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:04:36. coolingEstimate=01:26:22.8619504 [PrintingService.cs@1912] +06/28/2026 06:42:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.14337540803685;StartedAtUtc;10:10:41.8761211;11:32:50.7657569;01:22:08.8896358;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:15:43.0271827;01:26:22.8619504;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:42:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=121.32117638221155,printChamber1=121.32117638221155,printChamber2=121.32117638221155,printChamber3=121.32117638221155,printChamber4=121.32117638221155,surface=121.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:42:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.32117638221155. Used = 121.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:42:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0661135 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:43:17 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] +06/28/2026 06:43:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0475769 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:43:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4628.7397694, PhaseTotal = 8426.157323, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 88.31721571277397, Elapsed = 10:12:07.5920158, TimeTotal = 11:33:05.9939870, Remaining = 01:20:58.4019712, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:17:08.7430774, CoolingEstimate = 01:25:12.3742858, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:04:51. coolingEstimate=01:25:12.3742858 [PrintingService.cs@1912] +06/28/2026 06:43:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.31721571277397;StartedAtUtc;10:12:07.5920158;11:33:05.9939870;01:20:58.4019712;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:17:08.7430774;01:25:12.3742858;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:43:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=120.32117638221155,printChamber1=120.32117638221155,printChamber2=120.32117638221155,printChamber3=120.32117638221155,printChamber4=120.32117638221155,surface=120.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:43:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.32117638221155. Used = 120.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:44:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1407460 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:45:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4714.456401, PhaseTotal = 8426.1596689, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 88.49539712280028, Elapsed = 10:13:33.3086304, TimeTotal = 11:33:19.1224711, Remaining = 01:19:45.8138407, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:18:34.4596920, CoolingEstimate = 01:23:59.7861553, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:05:04. coolingEstimate=01:23:59.7861553 [PrintingService.cs@1912] +06/28/2026 06:45:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.49539712280028;StartedAtUtc;10:13:33.3086304;11:33:19.1224711;01:19:45.8138407;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:18:34.4596920;01:23:59.7861553;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:45:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=119.32117638221155,printChamber1=119.32117638221155,printChamber2=119.32117638221155,printChamber3=119.32117638221155,printChamber4=119.32117638221155,surface=119.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:45:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.32117638221155. Used = 119.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:45:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1309990 ~ 6.02 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:46:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0826525 ~ 6.03 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:46:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4800.1721407, PhaseTotal = 8426.1611229, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 88.67643116986709, Elapsed = 10:14:59.0244124, TimeTotal = 11:33:30.8586302, Remaining = 01:18:31.8342178, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:20:00.1754740, CoolingEstimate = 01:22:45.8065324, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:05:16. coolingEstimate=01:22:45.8065324 [PrintingService.cs@1912] +06/28/2026 06:46:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.67643116986709;StartedAtUtc;10:14:59.0244124;11:33:30.8586302;01:18:31.8342178;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:20:00.1754740;01:22:45.8065324;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:46:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=118.32117638221155,printChamber1=118.32117638221155,printChamber2=118.32117638221155,printChamber3=118.32117638221155,printChamber4=118.32117638221155,surface=118.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:46:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.32117638221155. Used = 118.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:47:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:47:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:47:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:47:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:47:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:47:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:47:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0887874 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:48:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4885.8880626, PhaseTotal = 8426.1627591, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 88.8475616812564, Elapsed = 10:16:24.7403050, TimeTotal = 11:33:47.1866162, Remaining = 01:17:22.4463112, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:21:25.8913666, CoolingEstimate = 01:21:36.4186258, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:05:32. coolingEstimate=01:21:36.4186258 [PrintingService.cs@1912] +06/28/2026 06:48:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.8475616812564;StartedAtUtc;10:16:24.7403050;11:33:47.1866162;01:17:22.4463112;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:21:25.8913666;01:21:36.4186258;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:48:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=117.32117638221155,printChamber1=117.32117638221155,printChamber2=117.32117638221155,printChamber3=117.32117638221155,printChamber4=117.32117638221155,surface=117.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:48:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.32117638221155. Used = 117.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:48:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 06:48:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0985691 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:49:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4971.6053858, PhaseTotal = 8426.1657966, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 89.02073931304838, Elapsed = 10:17:50.4579982, TimeTotal = 11:34:02.4962141, Remaining = 01:16:12.0382159, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:22:51.6090598, CoolingEstimate = 01:20:26.0105305, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:05:48. coolingEstimate=01:20:26.0105305 [PrintingService.cs@1912] +06/28/2026 06:49:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.02073931304838;StartedAtUtc;10:17:50.4579982;11:34:02.4962141;01:16:12.0382159;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:22:51.6090598;01:20:26.0105305;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:49:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=116.32117638221155,printChamber1=116.32117638221155,printChamber2=116.32117638221155,printChamber3=116.32117638221155,printChamber4=116.32117638221155,surface=116.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:49:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.32117638221155. Used = 116.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:49:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1245816 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:50:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0344551 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:50:57 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 06:50:57 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:50:57 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:51:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5057.3206401, PhaseTotal = 8426.1667652, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 89.18425629347303, Elapsed = 10:19:16.1728585, TimeTotal = 11:34:22.2556522, Remaining = 01:15:06.0827937, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:24:17.3239201, CoolingEstimate = 01:19:20.0551083, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:06:08. coolingEstimate=01:19:20.0551083 [PrintingService.cs@1912] +06/28/2026 06:51:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.18425629347303;StartedAtUtc;10:19:16.1728585;11:34:22.2556522;01:15:06.0827937;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:24:17.3239201;01:19:20.0551083;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:51:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=115.32117638221155,printChamber1=115.32117638221155,printChamber2=115.32117638221155,printChamber3=115.32117638221155,printChamber4=115.32117638221155,surface=115.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:51:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.32117638221155. Used = 115.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:51:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0142596 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:52:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:52:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:52:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:52:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:52:18 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:52:18 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:52:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5143.0364557, PhaseTotal = 8426.1682951, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 89.3835963917735, Elapsed = 10:20:41.8888978, TimeTotal = 11:34:25.2388147, Remaining = 01:13:43.3499169, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:25:43.0399594, CoolingEstimate = 01:17:57.3222315, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:06:10. coolingEstimate=01:17:57.3222315 [PrintingService.cs@1912] +06/28/2026 06:52:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.3835963917735;StartedAtUtc;10:20:41.8888978;11:34:25.2388147;01:13:43.3499169;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:25:43.0399594;01:17:57.3222315;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:52:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=114.32117638221155,printChamber1=114.32117638221155,printChamber2=114.32117638221155,printChamber3=114.32117638221155,printChamber4=114.32117638221155,surface=114.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:52:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.32117638221155. Used = 114.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:52:36 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] +06/28/2026 06:52:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1325606 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:53:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0130762 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:53:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5228.7604378, PhaseTotal = 8426.1779914, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 89.57970788371976, Elapsed = 10:22:07.6126642, TimeTotal = 11:34:29.7191206, Remaining = 01:12:22.1064564, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:27:08.7637258, CoolingEstimate = 01:16:36.0787710, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:06:15. coolingEstimate=01:16:36.0787710 [PrintingService.cs@1912] +06/28/2026 06:53:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.57970788371976;StartedAtUtc;10:22:07.6126642;11:34:29.7191206;01:12:22.1064564;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:27:08.7637258;01:16:36.0787710;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:53:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=113.32117638221155,printChamber1=113.32117638221155,printChamber2=113.32117638221155,printChamber3=113.32117638221155,printChamber4=113.32117638221155,surface=113.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:53:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.32117638221155. Used = 113.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:54:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0595319 ~ 5.99 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:55:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5314.4770271, PhaseTotal = 8426.180295, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 89.71613010481698, Elapsed = 10:23:33.3295488, TimeTotal = 11:35:01.8985383, Remaining = 01:11:28.5689895, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:28:34.4806104, CoolingEstimate = 01:15:42.5413041, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:06:47. coolingEstimate=01:15:42.5413041 [PrintingService.cs@1912] +06/28/2026 06:55:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.71613010481698;StartedAtUtc;10:23:33.3295488;11:35:01.8985383;01:11:28.5689895;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:28:34.4806104;01:15:42.5413041;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:55:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=112.32117638221155,printChamber1=112.32117638221155,printChamber2=112.32117638221155,printChamber3=112.32117638221155,printChamber4=112.32117638221155,surface=112.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:55:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.32117638221155. Used = 112.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:55:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0606776 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:56:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5400.1916849, PhaseTotal = 8426.1806671, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 89.92431148685023, Elapsed = 10:24:59.0439038, TimeTotal = 11:35:00.6739154, Remaining = 01:10:01.6300116, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:30:00.1949654, CoolingEstimate = 01:14:15.6023262, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:06:46. coolingEstimate=01:14:15.6023262 [PrintingService.cs@1912] +06/28/2026 06:56:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.92431148685023;StartedAtUtc;10:24:59.0439038;11:35:00.6739154;01:10:01.6300116;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:30:00.1949654;01:14:15.6023262;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:56:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=111.32117638221155,printChamber1=111.32117638221155,printChamber2=111.32117638221155,printChamber3=111.32117638221155,printChamber4=111.32117638221155,surface=111.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:56:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.32117638221155. Used = 111.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:56:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0385262 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:57:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 06:57:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 06:57:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 06:57:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 06:57:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 06:57:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 06:57:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0468435 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:58:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5485.912555, PhaseTotal = 8426.1872515, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 90.0913803346856, Elapsed = 10:26:24.7647895, TimeTotal = 11:35:18.4914360, Remaining = 01:08:53.7266465, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:31:25.9158511, CoolingEstimate = 01:13:07.6989611, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:07:04. coolingEstimate=01:13:07.6989611 [PrintingService.cs@1912] +06/28/2026 06:58:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.0913803346856;StartedAtUtc;10:26:24.7647895;11:35:18.4914360;01:08:53.7266465;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:31:25.9158511;01:13:07.6989611;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:58:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=110.32117638221155,printChamber1=110.32117638221155,printChamber2=110.32117638221155,printChamber3=110.32117638221155,printChamber4=110.32117638221155,surface=110.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:58:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.32117638221155. Used = 110.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:58:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1456683 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 06:59:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5571.6282551, PhaseTotal = 8426.1886659, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 90.27723393042129, Elapsed = 10:27:50.4804918, TimeTotal = 11:35:27.5528411, Remaining = 01:07:37.0723493, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:32:51.6315534, CoolingEstimate = 01:11:51.0446639, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:07:13. coolingEstimate=01:11:51.0446639 [PrintingService.cs@1912] +06/28/2026 06:59:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.27723393042129;StartedAtUtc;10:27:50.4804918;11:35:27.5528411;01:07:37.0723493;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:32:51.6315534;01:11:51.0446639;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 06:59:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=109.32117638221155,printChamber1=109.32117638221155,printChamber2=109.32117638221155,printChamber3=109.32117638221155,printChamber4=109.32117638221155,surface=109.32117638221155 [ControlledHeating.cs@169] +06/28/2026 06:59:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.32117638221155. Used = 109.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 06:59:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1592607 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:00:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1616246 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:01:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5657.3447516, PhaseTotal = 8426.1908767, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 90.45463034072479, Elapsed = 10:29:16.1972915, TimeTotal = 11:35:40.4804478, Remaining = 01:06:24.2831563, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:34:17.3483531, CoolingEstimate = 01:10:38.2554709, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:07:26. coolingEstimate=01:10:38.2554709 [PrintingService.cs@1912] +06/28/2026 07:01:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.45463034072479;StartedAtUtc;10:29:16.1972915;11:35:40.4804478;01:06:24.2831563;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:34:17.3483531;01:10:38.2554709;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:01:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=108.32117638221155,printChamber1=108.32117638221155,printChamber2=108.32117638221155,printChamber3=108.32117638221155,printChamber4=108.32117638221155,surface=108.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:01:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.32117638221155. Used = 108.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:01:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0515378 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:02:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 07:02:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 07:02:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 07:02:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:02:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:02:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 07:02:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5743.0604615, PhaseTotal = 8426.1923009, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 90.66330562971817, Elapsed = 10:30:41.9129717, TimeTotal = 11:35:38.9512867, Remaining = 01:04:57.0383150, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:35:43.0640333, CoolingEstimate = 01:09:11.0106296, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:07:24. coolingEstimate=01:09:11.0106296 [PrintingService.cs@1912] +06/28/2026 07:02:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.66330562971817;StartedAtUtc;10:30:41.9129717;11:35:38.9512867;01:04:57.0383150;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:35:43.0640333;01:09:11.0106296;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:02:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=107.32117638221155,printChamber1=107.32117638221155,printChamber2=107.32117638221155,printChamber3=107.32117638221155,printChamber4=107.32117638221155,surface=107.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:02:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.32117638221155. Used = 107.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:02:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1504616 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:03:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0030549 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:03:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5828.7773049, PhaseTotal = 8426.1948585, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 90.84534462413856, Elapsed = 10:32:07.6295759, TimeTotal = 11:35:49.6677819, Remaining = 01:03:42.0382060, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:37:08.7806375, CoolingEstimate = 01:07:56.0105206, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:07:35. coolingEstimate=01:07:56.0105206 [PrintingService.cs@1912] +06/28/2026 07:03:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.84534462413856;StartedAtUtc;10:32:07.6295759;11:35:49.6677819;01:03:42.0382060;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:37:08.7806375;01:07:56.0105206;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:03:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=106.32117638221155,printChamber1=106.32117638221155,printChamber2=106.32117638221155,printChamber3=106.32117638221155,printChamber4=106.32117638221155,surface=106.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:03:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.32117638221155. Used = 106.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:04:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0052379 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:05:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5914.4960402, PhaseTotal = 8426.1993081, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 91.01303713997426, Elapsed = 10:33:33.3483294, TimeTotal = 11:36:06.9265019, Remaining = 01:02:33.5781725, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:38:34.4993910, CoolingEstimate = 01:06:47.5504871, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:07:52. coolingEstimate=01:06:47.5504871 [PrintingService.cs@1912] +06/28/2026 07:05:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.01303713997426;StartedAtUtc;10:33:33.3483294;11:36:06.9265019;01:02:33.5781725;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:38:34.4993910;01:06:47.5504871;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:05:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=105.32117638221155,printChamber1=105.32117638221155,printChamber2=105.32117638221155,printChamber3=105.32117638221155,printChamber4=105.32117638221155,surface=105.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:05:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.32117638221155. Used = 105.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:05:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0171515 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:06:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6000.2126829, PhaseTotal = 8426.2016651, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 91.16371140900476, Elapsed = 10:34:59.0651294, TimeTotal = 11:36:31.9197678, Remaining = 01:01:32.8546384, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:40:00.2161910, CoolingEstimate = 01:05:46.8269530, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:08:17. coolingEstimate=01:05:46.8269530 [PrintingService.cs@1912] +06/28/2026 07:06:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.16371140900476;StartedAtUtc;10:34:59.0651294;11:36:31.9197678;01:01:32.8546384;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:40:00.2161910;01:05:46.8269530;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:06:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=104.32117638221155,printChamber1=104.32117638221155,printChamber2=104.32117638221155,printChamber3=104.32117638221155,printChamber4=104.32117638221155,surface=104.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:06:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.32117638221155. Used = 104.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:06:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0335181 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:07:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0572368 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:08:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6085.9281003, PhaseTotal = 8426.2027968, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 91.33346356408127, Elapsed = 10:36:24.7806389, TimeTotal = 11:36:48.0943707, Remaining = 01:00:23.3137318, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:41:25.9317005, CoolingEstimate = 01:04:37.2860464, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:08:33. coolingEstimate=01:04:37.2860464 [PrintingService.cs@1912] +06/28/2026 07:08:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.33346356408127;StartedAtUtc;10:36:24.7806389;11:36:48.0943707;01:00:23.3137318;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:41:25.9317005;01:04:37.2860464;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:08:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=103.32117638221155,printChamber1=103.32117638221155,printChamber2=103.32117638221155,printChamber3=103.32117638221155,printChamber4=103.32117638221155,surface=103.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:08:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.32117638221155. Used = 103.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:08:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1294064 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:09:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6171.6485776, PhaseTotal = 8426.2089884, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 91.49633243069353, Elapsed = 10:37:50.5008000, TimeTotal = 11:37:07.3604890, Remaining = 00:59:16.8596890, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:42:51.6518616, CoolingEstimate = 01:03:30.8320036, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:08:53. coolingEstimate=01:03:30.8320036 [PrintingService.cs@1912] +06/28/2026 07:09:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.49633243069353;StartedAtUtc;10:37:50.5008000;11:37:07.3604890;00:59:16.8596890;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:42:51.6518616;01:03:30.8320036;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:09:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=102.32117638221155,printChamber1=102.32117638221155,printChamber2=102.32117638221155,printChamber3=102.32117638221155,printChamber4=102.32117638221155,surface=102.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:09:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.32117638221155. Used = 102.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:09:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1615636 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:10:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0541671 ~ 6.04 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:11:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6257.3638283, PhaseTotal = 8426.2099534, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 91.69840426756441, Elapsed = 10:39:16.2160916, TimeTotal = 11:37:08.6625574, Remaining = 00:57:52.4464658, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:44:17.3671532, CoolingEstimate = 01:02:06.4187804, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:08:54. coolingEstimate=01:02:06.4187804 [PrintingService.cs@1912] +06/28/2026 07:11:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.69840426756441;StartedAtUtc;10:39:16.2160916;11:37:08.6625574;00:57:52.4464658;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:44:17.3671532;01:02:06.4187804;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:11:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=101.32117638221155,printChamber1=101.32117638221155,printChamber2=101.32117638221155,printChamber3=101.32117638221155,printChamber4=101.32117638221155,surface=101.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:11:02 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.32117638221155. Used = 101.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:11:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0153305 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6343.0814187, PhaseTotal = 8426.2132581, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 91.8661204515277, Elapsed = 10:40:41.9337300, TimeTotal = 11:37:25.6048226, Remaining = 00:56:43.6710926, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:45:43.0847916, CoolingEstimate = 01:00:57.6434072, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:09:11. coolingEstimate=01:00:57.6434072 [PrintingService.cs@1912] +06/28/2026 07:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.8661204515277;StartedAtUtc;10:40:41.9337300;11:37:25.6048226;00:56:43.6710926;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:45:43.0847916;01:00:57.6434072;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:12:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=100.32117638221155,printChamber1=100.32117638221155,printChamber2=100.32117638221155,printChamber3=100.32117638221155,printChamber4=100.32117638221155,surface=100.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:12:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.32117638221155. Used = 100.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:12:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0496153 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:13:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1453987 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:13:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6428.7963675, PhaseTotal = 8426.2139211, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 91.98975270341809, Elapsed = 10:42:07.6489053, TimeTotal = 11:38:02.5442759, Remaining = 00:55:54.8953706, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:47:08.7999669, CoolingEstimate = 01:00:08.8676852, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:09:48. coolingEstimate=01:00:08.8676852 [PrintingService.cs@1912] +06/28/2026 07:13:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.98975270341809;StartedAtUtc;10:42:07.6489053;11:38:02.5442759;00:55:54.8953706;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:47:08.7999669;01:00:08.8676852;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:13:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=99.32117638221155,printChamber1=99.32117638221155,printChamber2=99.32117638221155,printChamber3=99.32117638221155,printChamber4=99.32117638221155,surface=99.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:13:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.32117638221155. Used = 99.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:14:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1550859 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:15:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6514.5126712, PhaseTotal = 8450.9706556, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 92.21732368815798, Elapsed = 10:43:33.3651805, TimeTotal = 11:37:52.1381582, Remaining = 00:54:18.7729777, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:48:34.5162421, CoolingEstimate = 00:58:32.7452923, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:09:37. coolingEstimate=00:58:32.7452923 [PrintingService.cs@1912] +06/28/2026 07:15:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 92.21732368815798;StartedAtUtc;10:43:33.3651805;11:37:52.1381582;00:54:18.7729777;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:48:34.5162421;00:58:32.7452923;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:15:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=98.32117638221155,printChamber1=98.32117638221155,printChamber2=98.32117638221155,printChamber3=98.32117638221155,printChamber4=98.32117638221155,surface=98.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:15:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 98.32117638221155. Used = 98.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:15:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0290271 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:16:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6600.2283256, PhaseTotal = 8487.4391063, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 92.3383193695023, Elapsed = 10:44:59.0805456, TimeTotal = 11:38:30.0984400, Remaining = 00:53:31.0178944, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:50:00.2316072, CoolingEstimate = 00:57:44.9902090, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:10:15. coolingEstimate=00:57:44.9902090 [PrintingService.cs@1912] +06/28/2026 07:16:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 92.3383193695023;StartedAtUtc;10:44:59.0805456;11:38:30.0984400;00:53:31.0178944;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:50:00.2316072;00:57:44.9902090;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:16:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=97.32117638221155,printChamber1=97.32117638221155,printChamber2=97.32117638221155,printChamber3=97.32117638221155,printChamber4=97.32117638221155,surface=97.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:16:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 97.32117638221155. Used = 97.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:16:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1308868 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:17:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1652735 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:18:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6685.9439485, PhaseTotal = 8523.9075255, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 92.52772453489688, Elapsed = 10:46:24.7961899, TimeTotal = 11:38:36.9458504, Remaining = 00:52:12.1496605, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:51:25.9472515, CoolingEstimate = 00:56:26.1219751, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:10:22. coolingEstimate=00:56:26.1219751 [PrintingService.cs@1912] +06/28/2026 07:18:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 92.52772453489688;StartedAtUtc;10:46:24.7961899;11:38:36.9458504;00:52:12.1496605;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:51:25.9472515;00:56:26.1219751;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:18:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=96.32117638221155,printChamber1=96.32117638221155,printChamber2=96.32117638221155,printChamber3=96.32117638221155,printChamber4=96.32117638221155,surface=96.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:18:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 96.32117638221155. Used = 96.32117638221155 [SoftAnalysisSurfaceHeater.cs@881] +06/28/2026 07:18:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0120085 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:19:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=116.39286041259766 that are outside of set tolerance 20 for current step target 96.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6772.6626385, PhaseTotal = 8561.3790117, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 93.97579741166689, Elapsed = 10:47:51.5148983, TimeTotal = 11:29:23.3254188, Remaining = 00:41:31.8105205, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:52:52.6659599, CoolingEstimate = 00:45:45.7828351, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:01:09. coolingEstimate=00:45:45.7828351 [PrintingService.cs@1912] +06/28/2026 07:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 93.97579741166689;StartedAtUtc;10:47:51.5148983;11:29:23.3254188;00:41:31.8105205;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:52:52.6659599;00:45:45.7828351;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:19:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Cool-down surface target 100 reached, will disable surface and start cooling just chambers [ControlledHeating.cs@965] +06/28/2026 07:19:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=95.32117638221155,printChamber1=95.32117638221155,printChamber2=95.32117638221155,printChamber3=95.32117638221155,printChamber4=95.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:19:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1270768 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:20:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=115.67857360839844 that are outside of set tolerance 20 for current step target 95.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:20:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6822.9128898, PhaseTotal = 8562.3820593, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.02860303660222, Elapsed = 10:48:41.7651702, TimeTotal = 11:29:53.5376186, Remaining = 00:41:11.7724484, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:53:42.9162318, CoolingEstimate = 00:45:25.7447630, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:01:39. coolingEstimate=00:45:25.7447630 [PrintingService.cs@1912] +06/28/2026 07:20:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.02860303660222;StartedAtUtc;10:48:41.7651702;11:29:53.5376186;00:41:11.7724484;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:53:42.9162318;00:45:25.7447630;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:20:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=94.32117638221155,printChamber1=94.32117638221155,printChamber2=94.32117638221155,printChamber3=94.32117638221155,printChamber4=94.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:20:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0810571 ~ 5.99 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:21:12 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:21:12 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:21:14 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:21:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=115.07142639160156 that are outside of set tolerance 20 for current step target 94.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:21:27 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:21:27 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:21:27 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:21:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6888.1658451, PhaseTotal = 8578.3878109, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.134045229642, Elapsed = 10:49:47.0182015, TimeTotal = 11:30:16.4908205, Remaining = 00:40:29.4726190, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:54:48.1692631, CoolingEstimate = 00:44:43.4449336, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:02:02. coolingEstimate=00:44:43.4449336 [PrintingService.cs@1912] +06/28/2026 07:21:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.134045229642;StartedAtUtc;10:49:47.0182015;11:30:16.4908205;00:40:29.4726190;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:54:48.1692631;00:44:43.4449336;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:21:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=93.32117638221155,printChamber1=93.32117638221155,printChamber2=93.32117638221155,printChamber3=93.32117638221155,printChamber4=93.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:21:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0454098 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:22:22 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=114.25 that are outside of set tolerance 20 for current step target 93.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:22:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0811266 ~ 6.01 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6969.4167264, PhaseTotal = 8610.3914884, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.2340434303547, Elapsed = 10:51:08.2689486, TimeTotal = 11:30:58.7632308, Remaining = 00:39:50.4942822, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:56:09.4200102, CoolingEstimate = 00:44:04.4665968, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:02:44. coolingEstimate=00:44:04.4665968 [PrintingService.cs@1912] +06/28/2026 07:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.2340434303547;StartedAtUtc;10:51:08.2689486;11:30:58.7632308;00:39:50.4942822;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:56:09.4200102;00:44:04.4665968;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:22:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=92.32117638221155,printChamber1=92.32117638221155,printChamber2=92.32117638221155,printChamber3=92.32117638221155,printChamber4=92.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:23:02 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:23:02 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:23:06 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:23:17 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:23:17 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:23:18 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:23:37 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:23:37 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:23:39 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:23:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=113.17857360839844 that are outside of set tolerance 20 for current step target 92.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:23:47 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:23:47 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:23:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0030753 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:23:50 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:23:57 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:23:57 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:23:57 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:24:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0401324 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:25:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7095.6683947, PhaseTotal = 8687.395953, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.39009880224874, Elapsed = 10:53:14.5206122, TimeTotal = 11:32:03.9745583, Remaining = 00:38:49.4539461, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 01:58:15.6716738, CoolingEstimate = 00:43:03.4262607, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:03:49. coolingEstimate=00:43:03.4262607 [PrintingService.cs@1912] +06/28/2026 07:25:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.39009880224874;StartedAtUtc;10:53:14.5206122;11:32:03.9745583;00:38:49.4539461;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;01:58:15.6716738;00:43:03.4262607;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:25:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=91.32117638221155,printChamber1=91.32117638221155,printChamber2=91.32117638221155,printChamber3=91.32117638221155,printChamber4=91.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:25:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1285342 ~ 5.99 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:25:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=112.21428680419922 that are outside of set tolerance 20 for current step target 91.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:26:32 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:26:32 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:26:32 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:26:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0562557 ~ 5.96 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:26:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7209.924549, PhaseTotal = 8752.4049035, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.52610994060574, Elapsed = 10:55:08.7768115, TimeTotal = 11:33:05.0994357, Remaining = 00:37:56.3226242, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:00:09.9278731, CoolingEstimate = 00:42:10.2949388, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:04:50. coolingEstimate=00:42:10.2949388 [PrintingService.cs@1912] +06/28/2026 07:26:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.52610994060574;StartedAtUtc;10:55:08.7768115;11:33:05.0994357;00:37:56.3226242;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:00:09.9278731;00:42:10.2949388;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:26:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=90.32117638221155,printChamber1=90.32117638221155,printChamber2=90.32117638221155,printChamber3=90.32117638221155,printChamber4=90.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:27:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=111.21428680419922 that are outside of set tolerance 20 for current step target 90.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:27:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.0202248 ~ 5.93 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:28:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7306.1795915, PhaseTotal = 8799.4127423, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.63999586311736, Elapsed = 10:56:45.0321480, TimeTotal = 11:33:56.7644447, Remaining = 00:37:11.7322967, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:01:46.1832096, CoolingEstimate = 00:41:25.7046113, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:05:42. coolingEstimate=00:41:25.7046113 [PrintingService.cs@1912] +06/28/2026 07:28:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.63999586311736;StartedAtUtc;10:56:45.0321480;11:33:56.7644447;00:37:11.7322967;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:01:46.1832096;00:41:25.7046113;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:28:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=89.32117638221155,printChamber1=89.32117638221155,printChamber2=89.32117638221155,printChamber3=89.32117638221155,printChamber4=89.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:28:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.1458069 ~ 5.94 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:29:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=110.28571319580078 that are outside of set tolerance 20 for current step target 89.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:29:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 355 samples in 00:01:00.0071702 ~ 5.92 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:30:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7427.4367378, PhaseTotal = 8871.4226849, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.76801397895629, Elapsed = 10:58:46.2889573, TimeTotal = 11:35:08.4702926, Remaining = 00:36:22.1813353, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:03:47.4400189, CoolingEstimate = 00:40:36.1536499, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:06:54. coolingEstimate=00:40:36.1536499 [PrintingService.cs@1912] +06/28/2026 07:30:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.76801397895629;StartedAtUtc;10:58:46.2889573;11:35:08.4702926;00:36:22.1813353;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:03:47.4400189;00:40:36.1536499;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:30:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=88.32117638221155,printChamber1=88.32117638221155,printChamber2=88.32117638221155,printChamber3=88.32117638221155,printChamber4=88.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:30:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 355 samples in 00:01:00.0814996 ~ 5.91 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:31:21 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=109.10713958740234 that are outside of set tolerance 20 for current step target 88.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:31:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 354 samples in 00:01:00.0834562 ~ 5.89 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:32:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7541.6878888, PhaseTotal = 8936.4266321, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 94.90397473166922, Elapsed = 11:00:40.5403156, TimeTotal = 11:36:09.1044318, Remaining = 00:35:28.5641162, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:05:41.6913772, CoolingEstimate = 00:39:42.5364308, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:07:54. coolingEstimate=00:39:42.5364308 [PrintingService.cs@1912] +06/28/2026 07:32:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 94.90397473166922;StartedAtUtc;11:00:40.5403156;11:36:09.1044318;00:35:28.5641162;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:05:41.6913772;00:39:42.5364308;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:32:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=87.32117638221155,printChamber1=87.32117638221155,printChamber2=87.32117638221155,printChamber3=87.32117638221155,printChamber4=87.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:32:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 351 samples in 00:01:00.0553087 ~ 5.84 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:33:02 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:33:02 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:33:02 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:33:15 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=108.25 that are outside of set tolerance 20 for current step target 87.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:33:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.0254113 ~ 5.86 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:34:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7638.9407473, PhaseTotal = 8984.4322869, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.01756345691551, Elapsed = 11:02:17.7929747, TimeTotal = 11:37:01.5238625, Remaining = 00:34:43.7308878, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:07:18.9440363, CoolingEstimate = 00:38:57.7032024, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:08:47. coolingEstimate=00:38:57.7032024 [PrintingService.cs@1912] +06/28/2026 07:34:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.01756345691551;StartedAtUtc;11:02:17.7929747;11:37:01.5238625;00:34:43.7308878;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:07:18.9440363;00:38:57.7032024;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:34:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=86.32117638221155,printChamber1=86.32117638221155,printChamber2=86.32117638221155,printChamber3=86.32117638221155,printChamber4=86.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:34:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 351 samples in 00:01:00.0709298 ~ 5.84 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:34:52 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=107.28571319580078 that are outside of set tolerance 20 for current step target 86.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:35:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 351 samples in 00:01:00.1541143 ~ 5.84 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:36:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7756.1923791, PhaseTotal = 9052.436715, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.13040168852328, Elapsed = 11:04:15.0448881, TimeTotal = 11:38:15.1714496, Remaining = 00:34:00.1265615, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:09:16.1959497, CoolingEstimate = 00:38:14.0988761, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:10:00. coolingEstimate=00:38:14.0988761 [PrintingService.cs@1912] +06/28/2026 07:36:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.13040168852328;StartedAtUtc;11:04:15.0448881;11:38:15.1714496;00:34:00.1265615;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:09:16.1959497;00:38:14.0988761;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:36:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=85.32117638221155,printChamber1=85.32117638221155,printChamber2=85.32117638221155,printChamber3=85.32117638221155,printChamber4=85.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:36:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 350 samples in 00:01:00.1330336 ~ 5.82 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:36:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=106.17857360839844 that are outside of set tolerance 20 for current step target 85.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:37:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 349 samples in 00:01:00.1249071 ~ 5.8 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:38:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7876.4436397, PhaseTotal = 9123.4407718, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.25865204951357, Elapsed = 11:06:15.2961911, TimeTotal = 11:39:25.0030008, Remaining = 00:33:09.7068097, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:11:16.4472527, CoolingEstimate = 00:37:23.6791243, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:11:10. coolingEstimate=00:37:23.6791243 [PrintingService.cs@1912] +06/28/2026 07:38:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.25865204951357;StartedAtUtc;11:06:15.2961911;11:39:25.0030008;00:33:09.7068097;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:11:16.4472527;00:37:23.6791243;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:38:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=84.32117638221155,printChamber1=84.32117638221155,printChamber2=84.32117638221155,printChamber3=84.32117638221155,printChamber4=84.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:38:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 07:38:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 347 samples in 00:01:00.0231825 ~ 5.78 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:38:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=105.28571319580078 that are outside of set tolerance 20 for current step target 84.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:39:32 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 07:39:32 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 07:39:35 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 07:39:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7975.6917442, PhaseTotal = 9173.4416726, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.40380653502831, Elapsed = 11:07:54.5439600, TimeTotal = 11:40:05.1834570, Remaining = 00:32:10.6394970, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:12:55.6950216, CoolingEstimate = 00:36:24.6118116, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:11:50. coolingEstimate=00:36:24.6118116 [PrintingService.cs@1912] +06/28/2026 07:39:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.40380653502831;StartedAtUtc;11:07:54.5439600;11:40:05.1834570;00:32:10.6394970;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:12:55.6950216;00:36:24.6118116;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:39:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=83.32117638221155,printChamber1=83.32117638221155,printChamber2=83.32117638221155,printChamber3=83.32117638221155,printChamber4=83.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:39:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 347 samples in 00:01:00.0576435 ~ 5.78 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:40:29 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=104.25 that are outside of set tolerance 20 for current step target 83.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:40:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 346 samples in 00:01:00.0121873 ~ 5.77 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:41:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 345 samples in 00:01:00.1419910 ~ 5.74 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:41:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8106.9508834, PhaseTotal = 9255.453608, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.54351213148702, Elapsed = 11:10:05.8031137, TimeTotal = 11:41:21.1441999, Remaining = 00:31:15.3410862, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:15:06.9541753, CoolingEstimate = 00:35:29.3134008, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:13:06. coolingEstimate=00:35:29.3134008 [PrintingService.cs@1912] +06/28/2026 07:41:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.54351213148702;StartedAtUtc;11:10:05.8031137;11:41:21.1441999;00:31:15.3410862;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:15:06.9541753;00:35:29.3134008;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:41:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=82.32117638221155,printChamber1=82.32117638221155,printChamber2=82.32117638221155,printChamber3=82.32117638221155,printChamber4=82.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:42:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=102.89286041259766 that are outside of set tolerance 20 for current step target 82.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:42:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 341 samples in 00:01:00.0558175 ~ 5.68 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:43:17 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] +06/28/2026 07:43:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8193.200628, PhaseTotal = 9292.4561489, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.63326065063156, Elapsed = 11:11:32.0528614, TimeTotal = 11:42:11.8405200, Remaining = 00:30:39.7876586, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:16:33.2039230, CoolingEstimate = 00:34:53.7599732, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:13:57. coolingEstimate=00:34:53.7599732 [PrintingService.cs@1912] +06/28/2026 07:43:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.63326065063156;StartedAtUtc;11:11:32.0528614;11:42:11.8405200;00:30:39.7876586;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:16:33.2039230;00:34:53.7599732;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:43:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=81.32117638221155,printChamber1=81.32117638221155,printChamber2=81.32117638221155,printChamber3=81.32117638221155,printChamber4=81.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:43:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 344 samples in 00:01:00.0664451 ~ 5.73 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:44:07 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=102.28571319580078 that are outside of set tolerance 20 for current step target 81.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:44:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8280.4479602, PhaseTotal = 9330.4562774, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.72919282655893, Elapsed = 11:12:59.3002447, TimeTotal = 11:43:00.7591315, Remaining = 00:30:01.4588868, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:18:00.4513063, CoolingEstimate = 00:34:15.4312014, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:14:46. coolingEstimate=00:34:15.4312014 [PrintingService.cs@1912] +06/28/2026 07:44:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.72919282655893;StartedAtUtc;11:12:59.3002447;11:43:00.7591315;00:30:01.4588868;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:18:00.4513063;00:34:15.4312014;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:44:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=80.32117638221155,printChamber1=80.32117638221155,printChamber2=80.32117638221155,printChamber3=80.32117638221155,printChamber4=80.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:44:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 344 samples in 00:01:00.1508052 ~ 5.72 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:45:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=101.25 that are outside of set tolerance 20 for current step target 80.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:45:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 343 samples in 00:01:00.1112310 ~ 5.71 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:46:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 342 samples in 00:01:00.1227287 ~ 5.69 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:47:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8415.6966483, PhaseTotal = 9416.4577617, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.87768347164841, Elapsed = 11:15:14.5489087, TimeTotal = 11:44:16.4954030, Remaining = 00:29:01.9464943, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:20:15.6999703, CoolingEstimate = 00:33:15.9188089, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:16:02. coolingEstimate=00:33:15.9188089 [PrintingService.cs@1912] +06/28/2026 07:47:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.87768347164841;StartedAtUtc;11:15:14.5489087;11:44:16.4954030;00:29:01.9464943;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:20:15.6999703;00:33:15.9188089;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:47:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=79.32117638221155,printChamber1=79.32117638221155,printChamber2=79.32117638221155,printChamber3=79.32117638221155,printChamber4=79.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:47:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=100.25 that are outside of set tolerance 20 for current step target 79.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:47:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 339 samples in 00:01:00.1313266 ~ 5.64 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:48:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 341 samples in 00:01:00.1276393 ~ 5.67 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:49:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8544.9496793, PhaseTotal = 9496.463589, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 95.98976085703494, Elapsed = 11:17:23.8019375, TimeTotal = 11:45:41.8097666, Remaining = 00:28:18.0078291, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:22:24.9529991, CoolingEstimate = 00:32:31.9801437, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:17:27. coolingEstimate=00:32:31.9801437 [PrintingService.cs@1912] +06/28/2026 07:49:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 95.98976085703494;StartedAtUtc;11:17:23.8019375;11:45:41.8097666;00:28:18.0078291;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:22:24.9529991;00:32:31.9801437;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:49:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=78.32117638221155,printChamber1=78.32117638221155,printChamber2=78.32117638221155,printChamber3=78.32117638221155,printChamber4=78.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:49:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 340 samples in 00:01:00.0845046 ~ 5.66 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:49:58 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=99.21428680419922 that are outside of set tolerance 20 for current step target 78.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:50:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 340 samples in 00:01:00.1714684 ~ 5.65 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:51:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8659.1998576, PhaseTotal = 9561.4665636, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.10768985342739, Elapsed = 11:19:18.0520937, TimeTotal = 11:46:48.7314510, Remaining = 00:27:30.6793573, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:24:19.2031553, CoolingEstimate = 00:31:44.6516719, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:18:34. coolingEstimate=00:31:44.6516719 [PrintingService.cs@1912] +06/28/2026 07:51:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.10768985342739;StartedAtUtc;11:19:18.0520937;11:46:48.7314510;00:27:30.6793573;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:24:19.2031553;00:31:44.6516719;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:51:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=77.32117638221155,printChamber1=77.32117638221155,printChamber2=77.32117638221155,printChamber3=77.32117638221155,printChamber4=77.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:51:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 338 samples in 00:01:00.0129289 ~ 5.63 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:51:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=98.14286041259766 that are outside of set tolerance 20 for current step target 77.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:52:37 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] +06/28/2026 07:52:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 335 samples in 00:01:00.0232154 ~ 5.58 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:52:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8766.449273, PhaseTotal = 9619.4687752, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.23140038870285, Elapsed = 11:21:05.3014959, TimeTotal = 11:47:45.6622795, Remaining = 00:26:40.3607836, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:26:06.4525575, CoolingEstimate = 00:30:54.3330982, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:31. coolingEstimate=00:30:54.3330982 [PrintingService.cs@1912] +06/28/2026 07:52:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.23140038870285;StartedAtUtc;11:21:05.3014959;11:47:45.6622795;00:26:40.3607836;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:26:06.4525575;00:30:54.3330982;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:52:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=76.32117638221155,printChamber1=76.32117638221155,printChamber2=76.32117638221155,printChamber3=76.32117638221155,printChamber4=76.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:53:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=97.25 that are outside of set tolerance 20 for current step target 76.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:53:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 337 samples in 00:01:00.1462216 ~ 5.6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:54:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 337 samples in 00:01:00.1617819 ~ 5.6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:55:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8914.7003072, PhaseTotal = 9718.4726057, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.3822837948183, Elapsed = 11:23:33.5525281, TimeTotal = 11:49:12.9992788, Remaining = 00:25:39.4467507, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:28:34.7035897, CoolingEstimate = 00:29:53.4190653, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:58. coolingEstimate=00:29:53.4190653 [PrintingService.cs@1912] +06/28/2026 07:55:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.3822837948183;StartedAtUtc;11:23:33.5525281;11:49:12.9992788;00:25:39.4467507;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:28:34.7035897;00:29:53.4190653;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:55:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=75.32117638221155,printChamber1=75.32117638221155,printChamber2=75.32117638221155,printChamber3=75.32117638221155,printChamber4=75.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:55:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 335 samples in 00:01:00.0271969 ~ 5.58 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:56:08 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=96.21428680419922 that are outside of set tolerance 20 for current step target 75.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:56:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 335 samples in 00:01:00.0742331 ~ 5.58 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:57:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9032.9571509, PhaseTotal = 9787.4822456, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.4752144022664, Elapsed = 11:25:31.8103419, TimeTotal = 11:50:34.5881652, Remaining = 00:25:02.7778233, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:30:32.9614035, CoolingEstimate = 00:29:16.7501379, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:22:20. coolingEstimate=00:29:16.7501379 [PrintingService.cs@1912] +06/28/2026 07:57:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.4752144022664;StartedAtUtc;11:25:31.8103419;11:50:34.5881652;00:25:02.7778233;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:30:32.9614035;00:29:16.7501379;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:57:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=74.32117638221155,printChamber1=74.32117638221155,printChamber2=74.32117638221155,printChamber3=74.32117638221155,printChamber4=74.32117638221155 [ControlledHeating.cs@169] +06/28/2026 07:57:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 329 samples in 00:01:00.0746451 ~ 5.48 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:58:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=95.14286041259766 that are outside of set tolerance 20 for current step target 74.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 07:58:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 333 samples in 00:01:00.1439120 ~ 5.54 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:59:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 332 samples in 00:01:00.0096974 ~ 5.53 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 07:59:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9195.2682009, PhaseTotal = 9900.5460919, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.62348362934976, Elapsed = 11:28:14.1204354, TimeTotal = 11:52:17.1472072, Remaining = 00:24:03.0267718, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:33:15.2714970, CoolingEstimate = 00:28:16.9990864, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:24:02. coolingEstimate=00:28:16.9990864 [PrintingService.cs@1912] +06/28/2026 07:59:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.62348362934976;StartedAtUtc;11:28:14.1204354;11:52:17.1472072;00:24:03.0267718;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:33:15.2714970;00:28:16.9990864;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 07:59:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=73.32117638221155,printChamber1=73.32117638221155,printChamber2=73.32117638221155,printChamber3=73.32117638221155,printChamber4=73.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:00:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=94.28571319580078 that are outside of set tolerance 20 for current step target 73.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:00:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 332 samples in 00:01:00.1220840 ~ 5.52 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:01:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 331 samples in 00:01:00.6238197 ~ 5.46 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:02:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9347.5211669, PhaseTotal = 10003.5518542, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.73932729628757, Elapsed = 11:30:46.3736573, TimeTotal = 11:54:03.3552472, Remaining = 00:23:16.9815899, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:35:47.5247189, CoolingEstimate = 00:27:30.9539045, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:49. coolingEstimate=00:27:30.9539045 [PrintingService.cs@1912] +06/28/2026 08:02:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.73932729628757;StartedAtUtc;11:30:46.3736573;11:54:03.3552472;00:23:16.9815899;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:35:47.5247189;00:27:30.9539045;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:02:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=72.32117638221155,printChamber1=72.32117638221155,printChamber2=72.32117638221155,printChamber3=72.32117638221155,printChamber4=72.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:02:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 331 samples in 00:01:00.1682873 ~ 5.5 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:03:21 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=93.21428680419922 that are outside of set tolerance 20 for current step target 72.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:03:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 330 samples in 00:01:00.1364951 ~ 5.49 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:04:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9480.7911298, PhaseTotal = 10087.5746133, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.88226384409114, Elapsed = 11:32:59.6433527, TimeTotal = 11:55:17.7041317, Remaining = 00:22:18.0607790, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:38:00.7944143, CoolingEstimate = 00:26:32.0330936, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:27:03. coolingEstimate=00:26:32.0330936 [PrintingService.cs@1912] +06/28/2026 08:04:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.88226384409114;StartedAtUtc;11:32:59.6433527;11:55:17.7041317;00:22:18.0607790;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:38:00.7944143;00:26:32.0330936;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:04:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=71.32117638221155,printChamber1=71.32117638221155,printChamber2=71.32117638221155,printChamber3=71.32117638221155,printChamber4=71.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:04:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 330 samples in 00:01:00.1748969 ~ 5.48 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:05:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=92.17857360839844 that are outside of set tolerance 20 for current step target 71.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:05:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 328 samples in 00:01:00.1410534 ~ 5.45 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:06:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 328 samples in 00:01:00.1311788 ~ 5.45 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:07:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9623.0500453, PhaseTotal = 10180.5863251, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 96.99901046544346, Elapsed = 11:35:21.9025692, TimeTotal = 11:56:52.7094792, Remaining = 00:21:30.8069100, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:40:23.0536308, CoolingEstimate = 00:25:44.7792246, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:38. coolingEstimate=00:25:44.7792246 [PrintingService.cs@1912] +06/28/2026 08:07:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.99901046544346;StartedAtUtc;11:35:21.9025692;11:56:52.7094792;00:21:30.8069100;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:40:23.0536308;00:25:44.7792246;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:07:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=70.32117638221155,printChamber1=70.32117638221155,printChamber2=70.32117638221155,printChamber3=70.32117638221155,printChamber4=70.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:07:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 327 samples in 00:01:00.1446760 ~ 5.44 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:07:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=91.28571319580078 that are outside of set tolerance 20 for current step target 70.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:08:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 327 samples in 00:01:00.1695910 ~ 5.43 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:09:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9775.3214208, PhaseTotal = 10283.6104969, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.09203744035722, Elapsed = 11:37:54.1736466, TimeTotal = 11:58:48.3293157, Remaining = 00:20:54.1556691, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:42:55.3247082, CoolingEstimate = 00:25:08.1279837, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:30:34. coolingEstimate=00:25:08.1279837 [PrintingService.cs@1912] +06/28/2026 08:09:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.09203744035722;StartedAtUtc;11:37:54.1736466;11:58:48.3293157;00:20:54.1556691;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:42:55.3247082;00:25:08.1279837;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:09:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=69.32117638221155,printChamber1=69.32117638221155,printChamber2=69.32117638221155,printChamber3=69.32117638221155,printChamber4=69.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:09:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 323 samples in 00:01:00.0969203 ~ 5.37 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:10:29 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=90.17857360839844 that are outside of set tolerance 20 for current step target 69.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:10:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 322 samples in 00:01:00.1420481 ~ 5.35 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:11:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9904.5723037, PhaseTotal = 10363.614176, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.23636425113273, Elapsed = 11:40:03.4245258, TimeTotal = 11:59:57.2388615, Remaining = 00:19:53.8143357, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:45:04.5755874, CoolingEstimate = 00:24:07.7866503, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:31:42. coolingEstimate=00:24:07.7866503 [PrintingService.cs@1912] +06/28/2026 08:11:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.23636425113273;StartedAtUtc;11:40:03.4245258;11:59:57.2388615;00:19:53.8143357;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:45:04.5755874;00:24:07.7866503;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:11:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=68.32117638221155,printChamber1=68.32117638221155,printChamber2=68.32117638221155,printChamber3=68.32117638221155,printChamber4=68.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:11:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 324 samples in 00:01:00.0776650 ~ 5.39 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:12:38 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=89.28571319580078 that are outside of set tolerance 20 for current step target 68.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:12:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 324 samples in 00:01:00.0578637 ~ 5.39 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:13:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 324 samples in 00:01:00.0810881 ~ 5.39 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:13:57 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 08:13:57 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 08:13:58 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 08:14:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 322 samples in 00:01:00.0120386 ~ 5.37 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:15:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10099.8343291, PhaseTotal = 10509.6289977, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.35272093980299, Elapsed = 11:43:18.6865605, TimeTotal = 12:02:26.1809317, Remaining = 00:19:07.4943712, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:48:19.8376221, CoolingEstimate = 00:23:21.4666858, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:34:11. coolingEstimate=00:23:21.4666858 [PrintingService.cs@1912] +06/28/2026 08:15:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.35272093980299;StartedAtUtc;11:43:18.6865605;12:02:26.1809317;00:19:07.4943712;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:48:19.8376221;00:23:21.4666858;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:15:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=67.32117638221155,printChamber1=67.32117638221155,printChamber2=67.32117638221155,printChamber3=67.32117638221155,printChamber4=67.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:15:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 322 samples in 00:01:00.1837949 ~ 5.35 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:15:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=88.28571319580078 that are outside of set tolerance 20 for current step target 67.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:16:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 08:16:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 319 samples in 00:01:00.0418490 ~ 5.31 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:17:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10254.1610526, PhaseTotal = 10614.7085174, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.4527383256823, Elapsed = 11:45:53.0133405, TimeTotal = 12:04:20.0546564, Remaining = 00:18:27.0413159, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:50:54.1644021, CoolingEstimate = 00:22:41.0136305, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:36:05. coolingEstimate=00:22:41.0136305 [PrintingService.cs@1912] +06/28/2026 08:17:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.4527383256823;StartedAtUtc;11:45:53.0133405;12:04:20.0546564;00:18:27.0413159;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:50:54.1644021;00:22:41.0136305;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:17:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=66.32117638221155,printChamber1=66.32117638221155,printChamber2=66.32117638221155,printChamber3=66.32117638221155,printChamber4=66.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:17:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 320 samples in 00:01:00.1330266 ~ 5.32 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:18:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=87.28571319580078 that are outside of set tolerance 20 for current step target 66.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:18:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 320 samples in 00:01:00.1042414 ~ 5.32 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10372.4130956, PhaseTotal = 10683.7133567, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.55178705774118, Elapsed = 11:47:51.2653172, TimeTotal = 12:05:37.1473944, Remaining = 00:17:45.8820772, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:52:52.4163788, CoolingEstimate = 00:21:59.8543918, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:37:22. coolingEstimate=00:21:59.8543918 [PrintingService.cs@1912] +06/28/2026 08:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.55178705774118;StartedAtUtc;11:47:51.2653172;12:05:37.1473944;00:17:45.8820772;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:52:52.4163788;00:21:59.8543918;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:19:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=65.32117638221155,printChamber1=65.32117638221155,printChamber2=65.32117638221155,printChamber3=65.32117638221155,printChamber4=65.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:19:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 320 samples in 00:01:00.1290734 ~ 5.32 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:20:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=86.25 that are outside of set tolerance 20 for current step target 65.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:20:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 318 samples in 00:01:00.0635025 ~ 5.29 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:21:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 319 samples in 00:01:00.1542854 ~ 5.3 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:22:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 318 samples in 00:01:00.1712665 ~ 5.28 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:22:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10571.676214, PhaseTotal = 10833.7292714, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.71282604219374, Elapsed = 11:51:10.5286211, TimeTotal = 12:07:49.3219810, Remaining = 00:16:38.7933599, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:56:11.6796827, CoolingEstimate = 00:20:52.7656745, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:39:35. coolingEstimate=00:20:52.7656745 [PrintingService.cs@1912] +06/28/2026 08:22:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.71282604219374;StartedAtUtc;11:51:10.5286211;12:07:49.3219810;00:16:38.7933599;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:56:11.6796827;00:20:52.7656745;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:22:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=64.32117638221155,printChamber1=64.32117638221155,printChamber2=64.32117638221155,printChamber3=64.32117638221155,printChamber4=64.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:23:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=85.25 that are outside of set tolerance 20 for current step target 64.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:23:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 316 samples in 00:01:00.1574520 ~ 5.25 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:24:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 317 samples in 00:01:00.1538591 ~ 5.27 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:25:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 08:25:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10742.9325889, PhaseTotal = 10955.7384425, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.82033768674206, Elapsed = 11:54:01.7848100, TimeTotal = 12:09:56.3984005, Remaining = 00:15:54.6135905, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 02:59:02.9358716, CoolingEstimate = 00:20:08.5859051, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:41:42. coolingEstimate=00:20:08.5859051 [PrintingService.cs@1912] +06/28/2026 08:25:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.82033768674206;StartedAtUtc;11:54:01.7848100;12:09:56.3984005;00:15:54.6135905;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;02:59:02.9358716;00:20:08.5859051;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:25:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=63.32117638221155,printChamber1=63.32117638221155,printChamber2=63.32117638221155,printChamber3=63.32117638221155,printChamber4=63.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:25:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 315 samples in 00:01:00.0907402 ~ 5.24 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:26:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=84.25 that are outside of set tolerance 20 for current step target 63.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:26:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 316 samples in 00:01:00.1524824 ~ 5.25 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:27:18 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 08:27:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 314 samples in 00:01:00.0354328 ~ 5.23 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:28:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 315 samples in 00:01:00.1606886 ~ 5.24 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:28:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10933.185329, PhaseTotal = 11096.7439789, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 97.9575157977629, Elapsed = 11:57:12.0375464, TimeTotal = 12:12:09.2862788, Remaining = 00:14:57.2487324, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 03:02:13.1886080, CoolingEstimate = 00:19:11.2210470, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:43:55. coolingEstimate=00:19:11.2210470 [PrintingService.cs@1912] +06/28/2026 08:28:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.9575157977629;StartedAtUtc;11:57:12.0375464;12:12:09.2862788;00:14:57.2487324;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;03:02:13.1886080;00:19:11.2210470;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:28:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=62.32117638221155,printChamber1=62.32117638221155,printChamber2=62.32117638221155,printChamber3=62.32117638221155,printChamber4=62.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:29:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=82.96428680419922 that are outside of set tolerance 20 for current step target 62.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:29:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 314 samples in 00:01:00.0011869 ~ 5.23 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:30:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 312 samples in 00:01:00.0713582 ~ 5.19 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:31:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 313 samples in 00:01:00.1847636 ~ 5.2 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11122.4401555, PhaseTotal = 11236.7516017, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 98.07214124227004, Elapsed = 12:00:21.2924352, TimeTotal = 12:14:30.9174774, Remaining = 00:14:09.6250422, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 03:05:22.4434968, CoolingEstimate = 00:18:23.5973568, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:46:16. coolingEstimate=00:18:23.5973568 [PrintingService.cs@1912] +06/28/2026 08:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.07214124227004;StartedAtUtc;12:00:21.2924352;12:14:30.9174774;00:14:09.6250422;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;03:05:22.4434968;00:18:23.5973568;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:32:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=61.32117638221155,printChamber1=61.32117638221155,printChamber2=61.32117638221155,printChamber3=61.32117638221155,printChamber4=61.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:32:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 312 samples in 00:01:00.0572836 ~ 5.2 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:32:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=82.14286041259766 that are outside of set tolerance 20 for current step target 61.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:33:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 309 samples in 00:01:00.0781024 ~ 5.14 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:34:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11271.7001575, PhaseTotal = 11336.7643999, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 98.18198396316092, Elapsed = 12:02:50.5524384, TimeTotal = 12:16:13.6362291, Remaining = 00:13:23.0837907, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 03:07:51.7035000, CoolingEstimate = 00:17:37.0561053, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:47:59. coolingEstimate=00:17:37.0561053 [PrintingService.cs@1912] +06/28/2026 08:34:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.18198396316092;StartedAtUtc;12:02:50.5524384;12:16:13.6362291;00:13:23.0837907;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;03:07:51.7035000;00:17:37.0561053;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:34:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=60.32117638221155,printChamber1=60.32117638221155,printChamber2=60.32117638221155,printChamber3=60.32117638221155,printChamber4=60.32117638221155 [ControlledHeating.cs@169] +06/28/2026 08:34:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 312 samples in 00:01:00.1159416 ~ 5.19 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:35:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=81.17857360839844 that are outside of set tolerance 20 for current step target 60.32117638221155 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:35:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 309 samples in 00:01:00.0082542 ~ 5.15 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:36:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 310 samples in 00:01:00.1407368 ~ 5.15 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:37:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 309 samples in 00:01:00.1225323 ~ 5.14 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:38:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11515.9691028, PhaseTotal = 11531.7861415, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 98.30136024917745, Elapsed = 12:06:54.8213170, TimeTotal = 12:19:28.4819889, Remaining = 00:12:33.6606719, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 03:11:55.9723786, CoolingEstimate = 00:16:47.6329865, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:51:14. coolingEstimate=00:16:47.6329865 [PrintingService.cs@1912] +06/28/2026 08:38:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.30136024917745;StartedAtUtc;12:06:54.8213170;12:19:28.4819889;00:12:33.6606719;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;03:11:55.9723786;00:16:47.6329865;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:38:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=60,printChamber1=60,printChamber2=60,printChamber3=60,printChamber4=60 [ControlledHeating.cs@169] +06/28/2026 08:38:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=80.17857360839844 that are outside of set tolerance 20 for current step target 60 and final target 60 [ControlledHeating.cs@205] +06/28/2026 08:38:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 307 samples in 00:01:00.0941190 ~ 5.11 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:39:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11536.973225, PhaseTotal = 11536.973225, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 98.3336529040139, Elapsed = 12:07:15.8263327, TimeTotal = 12:19:35.2723956, Remaining = 00:12:19.4460629, Incomplete = False, SoftCount = 566, LayerPrintDone = 566, WeightsDone = 566, WeightDone = 03:06:51.2654339, WeightTotal = 03:06:51.2654339, WeightTotalEstimate = 03:06:51.2654339, LayerRecoatElapsed = 03:33:28.4077158, LayerRecoatDelays = 00:35:18, LayerRecoatPrintLayersElapsed = 02:45:08.8134142, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 02:59:50.3663997, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 06:35:50.7008351, CoolingElapsed = 03:12:16.9773943, CoolingEstimate = 00:16:33.4183775, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:05:18.6066042, PrintCapTotal = 00:04:32.1333090, JobElapsed = 05:45:11.0928640, JobTotal = 05:52:00.0788481, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:51:21. coolingEstimate=00:16:33.4183775 [PrintingService.cs@1912] +06/28/2026 08:39:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.3336529040139;StartedAtUtc;12:07:15.8263327;12:19:35.2723956;00:12:19.4460629;False;566;566;566;03:06:51.2654339;03:06:51.2654339;03:06:51.2654339;03:33:28.4077158;00:35:18;02:45:08.8134142;00:00:15.1422206;02:59:50.3663997;00:00:00.0210436;06:35:50.7008351;03:12:16.9773943;00:16:33.4183775;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:39:18.4886780;00:05:18.6066042;00:04:32.1333090;05:45:11.0928640;05:52:00.0788481 [PrintingService.cs@1918] +06/28/2026 08:39:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Reached final cool-down target 60 [ControlledHeating.cs@231] +06/28/2026 08:39:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Final cool-down target reached, disabling all heaters [ControlledHeating.cs@995] +06/28/2026 08:39:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Turning off heaters [PrintingService.cs@2257] +06/28/2026 08:39:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Finished [PrintingService.cs@2177] +06/28/2026 08:39:03 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Job succeeded: Job has finished successfully! [UIToastProvider.cs@98] +06/28/2026 08:39:22 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] +06/28/2026 08:39:22 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 08:39:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 354 samples in 00:01:00.0597349 ~ 5.89 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:40:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0358730 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:41:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0329630 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:42:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0358483 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:43:17 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] +06/28/2026 08:43:17 FAIL [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Failed to check at https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@162] System.Net.Http.HttpRequestException: Resource temporarily unavailable (compact.sls4all.com:443) + ---> System.Net.Sockets.SocketException (11): Resource temporarily unavailable + at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error, CancellationToken cancellationToken) + at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.System.Threading.Tasks.Sources.IValueTaskSource.GetResult(Int16 token) + at System.Net.Http.HttpConnectionPool.ConnectToTcpHostAsync(String host, Int32 port, HttpRequestMessage initialRequest, Boolean async, CancellationToken cancellationToken) + --- End of inner exception stack trace --- + at System.Net.Http.HttpConnectionPool.ConnectToTcpHostAsync(String host, Int32 port, HttpRequestMessage initialRequest, Boolean async, CancellationToken cancellationToken) + at System.Net.Http.HttpConnectionPool.ConnectAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) + at System.Net.Http.HttpConnectionPool.CreateHttp11ConnectionAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) + at System.Net.Http.HttpConnectionPool.InjectNewHttp11ConnectionAsync(QueueItem queueItem) + at System.Threading.Tasks.TaskCompletionSourceWithCancellation`1.WaitWithCancellationAsync(CancellationToken cancellationToken) + at System.Net.Http.HttpConnectionPool.SendWithVersionDetectionAndRetryAsync(HttpRequestMessage request, Boolean async, Boolean doRequestAuth, CancellationToken cancellationToken) + at System.Net.Http.RedirectHandler.SendAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) + at Microsoft.Extensions.Http.Logging.LoggingHttpMessageHandler.g__Core|4_0(HttpRequestMessage request, Boolean useAsync, CancellationToken cancellationToken) + at Microsoft.Extensions.Http.Logging.LoggingScopeHttpMessageHandler.g__Core|4_0(HttpRequestMessage request, Boolean useAsync, CancellationToken cancellationToken) + at System.Net.Http.HttpClient.g__Core|83_0(HttpRequestMessage request, HttpCompletionOption completionOption, CancellationTokenSource cts, Boolean disposeCts, CancellationTokenSource pendingRequestsCts, CancellationToken originalCancellationToken) + at System.Net.Http.Json.HttpClientJsonExtensions.g__Core|12_0[TValue,TJsonOptions](HttpClient client, Task`1 responseTask, Boolean usingResponseHeadersRead, CancellationTokenSource linkedCTS, Func`4 deserializeMethod, TJsonOptions jsonOptions, CancellationToken cancellationToken) + at SLS4All.Compact.UpdateModel.ApplicationUpdate.<>c__DisplayClass33_0.<b__4>d.MoveNext() in /azp/_work/1/s/SLS4All.Compact.Core/UpdateModel/ApplicationUpdate.cs:line 149 +06/28/2026 08:43:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0421938 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:44:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0152618 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:45:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0354500 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:46:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0463824 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:47:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0335840 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:48:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0390726 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:49:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0155078 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:50:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0365709 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:51:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0152849 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:52:37 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] +06/28/2026 08:52:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0462833 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:53:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0207167 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:54:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0070760 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:55:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0276422 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:56:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0353616 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:57:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1612768 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:58:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0110615 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 08:59:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0253422 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:00:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0188079 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:01:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0211947 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:02:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0262637 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:03:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0316514 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:04:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0376112 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:05:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1284663 ~ 6.05 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:06:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0455729 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:07:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0294124 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:08:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0444198 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:09:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0490944 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:10:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0617562 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:11:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0565171 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:12:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0179913 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:13:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0141288 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:14:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0461306 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:15:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0621037 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:16:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0554660 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:17:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0576317 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:18:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0344110 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:19:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0560172 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:20:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0439492 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:21:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0496187 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:22:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0367061 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:23:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0276242 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:24:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0333176 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:25:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0368095 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:26:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0367454 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:27:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0302409 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:28:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0291476 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:29:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0342901 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:30:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0178085 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:31:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0323359 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:32:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0492927 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:33:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0407064 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:34:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0091102 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:35:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0500754 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:36:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0226670 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:37:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0340344 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:38:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0465223 ~ 6.01 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:39:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0376897 ~ 6 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:40:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0208353 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:41:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0326282 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:42:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0287667 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:43:17 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] +06/28/2026 09:43:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0301446 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:44:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0496114 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:45:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0200269 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:46:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0138557 ~ 6.07 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:47:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0412758 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:48:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0413468 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:49:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0505834 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:50:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0576882 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:51:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0516217 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:52:38 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] +06/28/2026 09:52:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0657023 ~ 5.99 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:53:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0344465 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:54:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0754029 ~ 6.06 samples/sec, 11 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:55:01 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 19:38:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:39:32 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid +06/28/2026 09:55:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 09:56:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0448815 ~ 6.01 samples/sec, 12 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:57:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0290139 ~ 6.06 samples/sec, 12 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:58:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0382964 ~ 6.06 samples/sec, 12 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 09:58:12 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 19:39:33 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:40:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0498286 ~ 6.08 samples/sec, 3 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:41:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0583442 ~ 6.08 samples/sec, 3 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:42:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0582115 ~ 6.08 samples/sec, 3 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:43:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0515461 ~ 6.03 samples/sec, 3 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:44:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid +06/28/2026 09:58:12 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 09:59:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0210194 ~ 6.06 samples/sec, 13 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:00:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0379618 ~ 6.06 samples/sec, 13 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:01:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0584779 ~ 6.06 samples/sec, 13 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:01:56 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 10:01:56 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 10:02:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0646833 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:03:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0580562 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:04:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0533944 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:05:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0542347 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:06:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0428398 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:07:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0178285 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:08:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0426050 ~ 6.01 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:09:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0854697 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:10:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0329955 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:11:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0356863 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:12:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0069541 ~ 6.07 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:13:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0570807 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:14:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0390819 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:15:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0375515 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:16:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0296086 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:17:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0533138 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:18:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0373439 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:19:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0299970 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:20:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0178450 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:21:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0613190 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:22:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0633010 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:23:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0416779 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:24:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0372530 ~ 6.05 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:25:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0574943 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:26:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0489820 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:27:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0649904 ~ 6.04 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:28:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0432941 ~ 6.01 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:29:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0151281 ~ 6.07 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:30:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0608459 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:31:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0449115 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:32:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0402562 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:33:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0288756 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:34:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0629722 ~ 6.06 samples/sec, 14 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:35:52 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 10:35:52 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 10:36:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0610604 ~ 6.06 samples/sec, 15 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:37:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0425263 ~ 6.06 samples/sec, 15 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:38:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0315884 ~ 6.06 samples/sec, 15 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:39:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0121117 ~ 6.07 samples/sec, 15 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:40:26 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 10:40:26 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 10:40:32 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 10:40:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 10:41:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0432063 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:42:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0496970 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:43:17 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] +06/28/2026 10:43:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0519103 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:44:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0174200 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:45:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0370689 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:46:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0257410 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:47:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0182278 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:48:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0444415 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:49:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0267411 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:50:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0312575 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:51:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0360128 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:52:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0252598 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:52:38 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] +06/28/2026 10:53:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0390168 ~ 6.06 samples/sec, 17 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:53:54 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 10:53:54 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 10:54:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0437556 ~ 6.05 samples/sec, 18 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:55:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0319938 ~ 6.06 samples/sec, 18 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:56:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0723377 ~ 6.06 samples/sec, 18 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:57:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0351235 ~ 6.06 samples/sec, 18 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:58:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0395410 ~ 6.06 samples/sec, 18 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 10:59:29 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 10:59:29 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:00:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0400831 ~ 6.01 samples/sec, 19 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:01:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0643805 ~ 6.04 samples/sec, 19 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:02:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0442296 ~ 6.06 samples/sec, 19 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:03:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0117856 ~ 6.07 samples/sec, 19 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:04:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0593126 ~ 6.06 samples/sec, 19 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:05:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0182315 ~ 6.06 samples/sec, 19 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:06:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0238433 ~ 6.06 samples/sec, 19 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:07:25 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:07:25 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:08:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0492118 ~ 6.06 samples/sec, 20 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:09:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0526471 ~ 6.06 samples/sec, 20 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:10:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0395578 ~ 6.06 samples/sec, 20 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:11:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0057787 ~ 6 samples/sec, 20 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:12:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0430134 ~ 6.06 samples/sec, 20 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:13:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0146822 ~ 6.07 samples/sec, 20 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:13:26 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:13:26 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:14:15 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:14:15 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:15:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0243555 ~ 6.01 samples/sec, 22 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:16:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0428995 ~ 6.01 samples/sec, 22 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:17:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0580390 ~ 6.06 samples/sec, 22 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:18:05 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:18:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:19:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0467686 ~ 6.06 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:20:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0461304 ~ 6.06 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:21:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0398467 ~ 6.06 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:22:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0421150 ~ 6.06 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:23:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0316779 ~ 6.06 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:24:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0260595 ~ 6.01 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:25:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0464732 ~ 6.06 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:26:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0337193 ~ 6.06 samples/sec, 23 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:26:12 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:26:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:26:43 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:26:43 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:27:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0272911 ~ 6.06 samples/sec, 25 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:28:02 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:28:02 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:29:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0761330 ~ 6.06 samples/sec, 26 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:30:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0369327 ~ 6.06 samples/sec, 26 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:31:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0495115 ~ 6.06 samples/sec, 26 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:32:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0290499 ~ 6.06 samples/sec, 26 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:33:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0252526 ~ 6.06 samples/sec, 26 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:34:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0247022 ~ 6.01 samples/sec, 26 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:34:40 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 11:34:40 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 11:35:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0650931 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:36:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0230360 ~ 6 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:37:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0505024 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:38:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0426372 ~ 6.05 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:39:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0575614 ~ 5.99 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:40:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0254848 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:41:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0550572 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:42:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0355580 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:43:17 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] +06/28/2026 11:43:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0565692 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:44:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0276406 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:45:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0439121 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:46:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0388626 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:47:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0254726 ~ 6.01 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:48:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0275980 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:49:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1624942 ~ 6.07 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:50:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0258454 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:51:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0219902 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:52:38 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] +06/28/2026 11:52:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0287612 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:53:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0481475 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:54:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0256685 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:55:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0043387 ~ 6.07 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:56:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0466064 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:57:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0421965 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:58:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0351762 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 11:59:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0379110 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:00:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0440219 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:01:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0541785 ~ 6.01 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:02:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0384425 ~ 6.06 samples/sec, 27 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:03:05 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:03:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:04:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0444700 ~ 6.06 samples/sec, 28 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:05:00 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:05:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:05:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:05:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:06:27 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:06:27 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:06:45 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:06:45 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:07:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0451153 ~ 6.01 samples/sec, 32 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:08:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0558293 ~ 6.04 samples/sec, 32 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:09:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.2020376 ~ 6 samples/sec, 32 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:10:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0220592 ~ 6.06 samples/sec, 32 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:11:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0467312 ~ 6.06 samples/sec, 32 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:12:41 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:12:41 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:13:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0436765 ~ 6.01 samples/sec, 33 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:14:30 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:14:31 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:15:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0185727 ~ 6.01 samples/sec, 34 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:16:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0362656 ~ 6.06 samples/sec, 34 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:17:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0370577 ~ 6.06 samples/sec, 34 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:18:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0278134 ~ 6.06 samples/sec, 34 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:19:07 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:19:07 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:20:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1613200 ~ 6.07 samples/sec, 35 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:21:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0474650 ~ 6 samples/sec, 35 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:22:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0093777 ~ 6.07 samples/sec, 35 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:22:18 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:22:18 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:22:41 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"2be9f3cd-d2af-49a9-9c40-2c9c778e593e","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"}. Original={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"19c9dc41-cde7-4aa8-9203-5eced056967f","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"} +06/28/2026 12:22:41 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"2be9f3cd-d2af-49a9-9c40-2c9c778e593e","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"}. Original={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"19c9dc41-cde7-4aa8-9203-5eced056967f","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"} +06/28/2026 12:22:46 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"2be9f3cd-d2af-49a9-9c40-2c9c778e593e","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"}. Original={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"19c9dc41-cde7-4aa8-9203-5eced056967f","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"} +06/28/2026 12:22:50 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:03.0484449 (3.0484449). Stats=NestingStats { ZMax = 66.20000457763672, ChamberVolume = 1468034.125, SinteredVolume = 519014.98828125, Density = 0.3535442258750286 } [ExhaustiveNester.cs@1820] +06/28/2026 12:22:50 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:03.5051749 [CurrentJobAutomatic.razor.cs@103] +06/28/2026 12:22:51 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"2be9f3cd-d2af-49a9-9c40-2c9c778e593e","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"}. Original={"Name":"Hex Coasters and Nameplates and Benchies 2026_06_28","CreatedAt":"2026-06-28T11:22:21.0228541+00:00","ObjectFiles":[{"Id":"eb866750-e7ce-4ab4-a00a-71fe67362e43","Name":"BaseHex.STL","Hash":"3F8E3F48BB02D0289CD5EF6F22D7F567115C46C7"},{"Id":"efa73592-8dac-459e-8961-982a6389a85a","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"bfb43a63-b500-4b63-9342-2a72148615ce","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"}],"PrintProfile":{"Id":"2be9f3cd-d2af-49a9-9c40-2c9c778e593e","IsEmpty":false},"NestingState":{"ChamberDepth":66.2,"ChamberVolume":1468034.125,"SinteredVolume":519014.988,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"a5981272-4877-43da-b046-c5b7ebd22c5d"} +06/28/2026 12:23:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 350 samples in 00:01:00.1067162 ~ 5.82 samples/sec, 36 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:24:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1379460 ~ 5.99 samples/sec, 36 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:25:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1065945 ~ 6.02 samples/sec, 36 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:26:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0023022 ~ 6 samples/sec, 36 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:27:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1408095 ~ 6 samples/sec, 36 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:27:35 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:27:35 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:28:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1249438 ~ 6.04 samples/sec, 37 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:29:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.1265475 ~ 5.95 samples/sec, 37 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:30:34 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:30:35 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:30:43 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:30:44 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:31:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0310617 ~ 6.01 samples/sec, 39 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:32:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1606574 ~ 6 samples/sec, 39 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:33:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0925047 ~ 6.04 samples/sec, 39 resets, 182 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 12:33:47 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:33:47 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:34:21 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:34:21 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] +06/28/2026 12:34:54 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid + at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 + at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 + at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 + at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 +06/28/2026 12:34:54 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238]