diff --git "a/Current/logs/default36.log" "b/Current/logs/default36.log" --- "a/Current/logs/default36.log" +++ "b/Current/logs/default36.log" @@ -1,3667 +1,3033 @@ -06/10/2026 03:44:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.24337758272932;StartedAtUtc;07:21:30.6333257;08:37:56.4707792;01:16:25.8374535;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:04:17.2675043;01:21:56.3265119;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:44:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=129.1249656677246,printChamber1=129.1249656677246,printChamber2=129.1249656677246,printChamber3=129.1249656677246,printChamber4=129.1249656677246,surface=129.1249656677246 [ControlledHeating.cs@169] -06/10/2026 03:44:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.1249656677246. Used = 129.1249656677246 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:44:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0748390 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:45:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1599481 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:45:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 3942.978884, PhaseTotal = 7296.5473698, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 85.50094836973193, Elapsed = 07:22:56.3516256, TimeTotal = 08:38:03.1074185, Remaining = 01:15:06.7557929, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:05:42.9858042, CoolingEstimate = 01:20:37.2448513, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:00:34. coolingEstimate=01:20:37.2448513 [PrintingService.cs@1912] -06/10/2026 03:45:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.50094836973193;StartedAtUtc;07:22:56.3516256;08:38:03.1074185;01:15:06.7557929;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:05:42.9858042;01:20:37.2448513;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:45:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=128.1249656677246,printChamber1=128.1249656677246,printChamber2=128.1249656677246,printChamber3=128.1249656677246,printChamber4=128.1249656677246,surface=128.1249656677246 [ControlledHeating.cs@169] -06/10/2026 03:45:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.1249656677246. Used = 128.1249656677246 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:46:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0412746 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:46:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4028.6947749, PhaseTotal = 7296.548975, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 85.69933959013804, Elapsed = 07:24:22.0675204, TimeTotal = 08:38:31.1703403, Remaining = 01:14:09.1028199, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:07:08.7016990, CoolingEstimate = 01:19:39.5918783, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:01:02. coolingEstimate=01:19:39.5918783 [PrintingService.cs@1912] -06/10/2026 03:46:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.69933959013804;StartedAtUtc;07:24:22.0675204;08:38:31.1703403;01:14:09.1028199;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:07:08.7016990;01:19:39.5918783;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:46:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=127.12496566772461,printChamber1=127.12496566772461,printChamber2=127.12496566772461,printChamber3=127.12496566772461,printChamber4=127.12496566772461,surface=127.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:46:52 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.12496566772461. Used = 127.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:47:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0483380 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:47:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 03:47:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 03:47:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 03:47:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 03:47:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 03:47:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 03:48:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0739706 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:48:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4114.4108489, PhaseTotal = 7296.5507633, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 85.93891212422871, Elapsed = 07:25:47.7838362, TimeTotal = 08:38:44.1824862, Remaining = 01:12:56.3986500, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:08:34.4180148, CoolingEstimate = 01:18:26.8877084, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:01:15. coolingEstimate=01:18:26.8877084 [PrintingService.cs@1912] -06/10/2026 03:48:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 85.93891212422871;StartedAtUtc;07:25:47.7838362;08:38:44.1824862;01:12:56.3986500;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:08:34.4180148;01:18:26.8877084;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:48:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=126.12496566772461,printChamber1=126.12496566772461,printChamber2=126.12496566772461,printChamber3=126.12496566772461,printChamber4=126.12496566772461,surface=126.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:48:18 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.12496566772461. Used = 126.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:49:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0644997 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:49:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4200.1282745, PhaseTotal = 7296.5539032, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 86.21403635816472, Elapsed = 07:27:13.5010348, TimeTotal = 08:38:44.2834326, Remaining = 01:11:30.7823978, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:10:00.1352134, CoolingEstimate = 01:17:01.2714562, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:01:15. coolingEstimate=01:17:01.2714562 [PrintingService.cs@1912] -06/10/2026 03:49:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.21403635816472;StartedAtUtc;07:27:13.5010348;08:38:44.2834326;01:11:30.7823978;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:10:00.1352134;01:17:01.2714562;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:49:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=125.12496566772461,printChamber1=125.12496566772461,printChamber2=125.12496566772461,printChamber3=125.12496566772461,printChamber4=125.12496566772461,surface=125.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:49:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.12496566772461. Used = 125.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:50:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0529510 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:51:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4285.8435279, PhaseTotal = 7296.5548709, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 86.38420659882894, Elapsed = 07:28:39.2164254, TimeTotal = 08:39:22.1967548, Remaining = 01:10:42.9803294, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:11:25.8506040, CoolingEstimate = 01:16:13.4693878, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:01:53. coolingEstimate=01:16:13.4693878 [PrintingService.cs@1912] -06/10/2026 03:51:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.38420659882894;StartedAtUtc;07:28:39.2164254;08:39:22.1967548;01:10:42.9803294;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:11:25.8506040;01:16:13.4693878;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:51:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=124.12496566772461,printChamber1=124.12496566772461,printChamber2=124.12496566772461,printChamber3=124.12496566772461,printChamber4=124.12496566772461,surface=124.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:51:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.12496566772461. Used = 124.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:51:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0456722 ~ 5.96 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:52:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0687215 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:52:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 03:52:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 03:52:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 03:52:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 03:52:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 03:52:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 03:52:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4371.5595391, PhaseTotal = 7296.5565963, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 86.61345068106657, Elapsed = 07:30:04.9322864, TimeTotal = 08:39:38.6819184, Remaining = 01:09:33.7496320, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:12:51.5664650, CoolingEstimate = 01:15:04.2386904, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:02:09. coolingEstimate=01:15:04.2386904 [PrintingService.cs@1912] -06/10/2026 03:52:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.61345068106657;StartedAtUtc;07:30:04.9322864;08:39:38.6819184;01:09:33.7496320;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:12:51.5664650;01:15:04.2386904;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:52:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=123.12496566772461,printChamber1=123.12496566772461,printChamber2=123.12496566772461,printChamber3=123.12496566772461,printChamber4=123.12496566772461,surface=123.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:52:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.12496566772461. Used = 123.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:53:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1637004 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:54:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4457.2749911, PhaseTotal = 7296.5577626, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 86.89940267240594, Elapsed = 07:31:30.6477592, TimeTotal = 08:39:34.7226403, Remaining = 01:08:04.0748811, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:14:17.2819378, CoolingEstimate = 01:13:34.5639395, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:02:05. coolingEstimate=01:13:34.5639395 [PrintingService.cs@1912] -06/10/2026 03:54:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 86.89940267240594;StartedAtUtc;07:31:30.6477592;08:39:34.7226403;01:08:04.0748811;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:14:17.2819378;01:13:34.5639395;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:54:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=122.12496566772461,printChamber1=122.12496566772461,printChamber2=122.12496566772461,printChamber3=122.12496566772461,printChamber4=122.12496566772461,surface=122.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:54:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.12496566772461. Used = 122.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:54:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0651531 ~ 5.98 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:55:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1380539 ~ 6.04 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:55:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4542.9902184, PhaseTotal = 7296.5587042, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 87.16130310725735, Elapsed = 07:32:56.3629643, TimeTotal = 08:39:39.3903894, Remaining = 01:06:43.0274251, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:15:42.9971429, CoolingEstimate = 01:12:13.5164835, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:02:10. coolingEstimate=01:12:13.5164835 [PrintingService.cs@1912] -06/10/2026 03:55:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.16130310725735;StartedAtUtc;07:32:56.3629643;08:39:39.3903894;01:06:43.0274251;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:15:42.9971429;01:12:13.5164835;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:55:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=121.12496566772461,printChamber1=121.12496566772461,printChamber2=121.12496566772461,printChamber3=121.12496566772461,printChamber4=121.12496566772461,surface=121.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:55:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.12496566772461. Used = 121.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:56:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0756250 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:56:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4628.7061397, PhaseTotal = 7296.5603398, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 87.34072888465663, Elapsed = 07:34:22.0788812, TimeTotal = 08:40:13.4776402, Remaining = 01:05:51.3987590, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:17:08.7130598, CoolingEstimate = 01:11:21.8878174, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:02:44. coolingEstimate=01:11:21.8878174 [PrintingService.cs@1912] -06/10/2026 03:56:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.34072888465663;StartedAtUtc;07:34:22.0788812;08:40:13.4776402;01:05:51.3987590;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:17:08.7130598;01:11:21.8878174;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:56:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=120.12496566772461,printChamber1=120.12496566772461,printChamber2=120.12496566772461,printChamber3=120.12496566772461,printChamber4=120.12496566772461,surface=120.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:56:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.12496566772461. Used = 120.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:57:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0856944 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:57:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 03:57:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 03:57:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 03:57:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 03:57:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 03:57:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 03:58:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0090892 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:58:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4714.4226854, PhaseTotal = 7296.5625998, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 87.6131883483714, Elapsed = 07:35:47.7954301, TimeTotal = 08:40:14.2451903, Remaining = 01:04:26.4497602, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:18:34.4296087, CoolingEstimate = 01:09:56.9388186, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:02:45. coolingEstimate=01:09:56.9388186 [PrintingService.cs@1912] -06/10/2026 03:58:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.6131883483714;StartedAtUtc;07:35:47.7954301;08:40:14.2451903;01:04:26.4497602;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:18:34.4296087;01:09:56.9388186;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:58:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=119.12496566772461,printChamber1=119.12496566772461,printChamber2=119.12496566772461,printChamber3=119.12496566772461,printChamber4=119.12496566772461,surface=119.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:58:18 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.12496566772461. Used = 119.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 03:59:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0504867 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 03:59:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4800.1384419, PhaseTotal = 7296.5640706, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 87.83538632557246, Elapsed = 07:37:13.5114551, TimeTotal = 08:40:32.8693511, Remaining = 01:03:19.3578960, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:20:00.1456337, CoolingEstimate = 01:08:49.8469544, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:03:03. coolingEstimate=01:08:49.8469544 [PrintingService.cs@1912] -06/10/2026 03:59:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 87.83538632557246;StartedAtUtc;07:37:13.5114551;08:40:32.8693511;01:03:19.3578960;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:20:00.1456337;01:08:49.8469544;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 03:59:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=118.12496566772461,printChamber1=118.12496566772461,printChamber2=118.12496566772461,printChamber3=118.12496566772461,printChamber4=118.12496566772461,surface=118.12496566772461 [ControlledHeating.cs@169] -06/10/2026 03:59:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.12496566772461. Used = 118.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:00:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0918245 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:01:10 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=138.35714721679688 that are outside of set tolerance 20 for current step target 118.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:01:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4886.8590438, PhaseTotal = 7297.5703868, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 88.0795335253517, Elapsed = 07:38:40.2317895, TimeTotal = 08:40:44.7519736, Remaining = 01:02:04.5201841, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:21:26.8659681, CoolingEstimate = 01:07:35.0092425, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:03:15. coolingEstimate=01:07:35.0092425 [PrintingService.cs@1912] -06/10/2026 04:01:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.0795335253517;StartedAtUtc;07:38:40.2317895;08:40:44.7519736;01:02:04.5201841;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:21:26.8659681;01:07:35.0092425;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:01:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=117.12496566772461,printChamber1=117.12496566772461,printChamber2=117.12496566772461,printChamber3=117.12496566772461,printChamber4=117.12496566772461,surface=117.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:01:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.12496566772461. Used = 117.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:01:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0394120 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:02:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1589337 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:02:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 04:02:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 04:02:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 04:02:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 04:02:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 04:02:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 04:02:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=137.39285278320312 that are outside of set tolerance 20 for current step target 117.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:02:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 4973.5785057, PhaseTotal = 7298.5755629, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 88.3539772100175, Elapsed = 07:40:06.9518889, TimeTotal = 08:40:45.8507932, Remaining = 01:00:38.8989043, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:22:53.5860675, CoolingEstimate = 01:06:09.3879627, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:03:16. coolingEstimate=01:06:09.3879627 [PrintingService.cs@1912] -06/10/2026 04:02:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.3539772100175;StartedAtUtc;07:40:06.9518889;08:40:45.8507932;01:00:38.8989043;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:22:53.5860675;01:06:09.3879627;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:02:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=116.12496566772461,printChamber1=116.12496566772461,printChamber2=116.12496566772461,printChamber3=116.12496566772461,printChamber4=116.12496566772461,surface=116.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:02:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.12496566772461. Used = 116.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:03:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0148426 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:04:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=136.17857360839844 that are outside of set tolerance 20 for current step target 116.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:04:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5060.2950356, PhaseTotal = 7299.5778071, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 88.63445317204395, Elapsed = 07:41:33.6677963, TimeTotal = 08:40:44.8114759, Remaining = 00:59:11.1436796, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:24:20.3019749, CoolingEstimate = 01:04:41.6327380, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:03:15. coolingEstimate=01:04:41.6327380 [PrintingService.cs@1912] -06/10/2026 04:04:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.63445317204395;StartedAtUtc;07:41:33.6677963;08:40:44.8114759;00:59:11.1436796;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:24:20.3019749;01:04:41.6327380;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:04:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=115.12496566772461,printChamber1=115.12496566772461,printChamber2=115.12496566772461,printChamber3=115.12496566772461,printChamber4=115.12496566772461,surface=115.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:04:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.12496566772461. Used = 115.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:04:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1171182 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:05:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0223457 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:05:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=135.5357208251953 that are outside of set tolerance 20 for current step target 115.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:05:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5147.0121104, PhaseTotal = 7300.5805962, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 88.8489987382663, Elapsed = 07:43:00.3850160, TimeTotal = 08:41:06.9646372, Remaining = 00:58:06.5796212, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:25:47.0191946, CoolingEstimate = 01:03:37.0686796, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:03:37. coolingEstimate=01:03:37.0686796 [PrintingService.cs@1912] -06/10/2026 04:05:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 88.8489987382663;StartedAtUtc;07:43:00.3850160;08:41:06.9646372;00:58:06.5796212;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:25:47.0191946;01:03:37.0686796;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:05:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=114.12496566772461,printChamber1=114.12496566772461,printChamber2=114.12496566772461,printChamber3=114.12496566772461,printChamber4=114.12496566772461,surface=114.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:05:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.12496566772461. Used = 114.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:06:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0895439 ~ 6.04 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:06:57 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=134.60714721679688 that are outside of set tolerance 20 for current step target 114.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:06:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5233.7289008, PhaseTotal = 7301.5831009, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 89.14378243955107, Elapsed = 07:44:27.1017894, TimeTotal = 08:41:00.8473937, Remaining = 00:56:33.7456043, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:27:13.7359680, CoolingEstimate = 01:02:04.2346627, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:03:31. coolingEstimate=01:02:04.2346627 [PrintingService.cs@1912] -06/10/2026 04:06:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.14378243955107;StartedAtUtc;07:44:27.1017894;08:41:00.8473937;00:56:33.7456043;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:27:13.7359680;01:02:04.2346627;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:06:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=113.12496566772461,printChamber1=113.12496566772461,printChamber2=113.12496566772461,printChamber3=113.12496566772461,printChamber4=113.12496566772461,surface=113.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:06:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.12496566772461. Used = 113.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:07:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1524482 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:07:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 04:07:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 04:07:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 04:07:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 04:07:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 04:07:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 04:08:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0052146 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:08:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=133.60714721679688 that are outside of set tolerance 20 for current step target 113.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:08:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5320.4512097, PhaseTotal = 7302.5911241, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 89.31147275329504, Elapsed = 07:45:53.8240706, TimeTotal = 08:41:39.2532861, Remaining = 00:55:45.4292155, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:28:40.4582492, CoolingEstimate = 01:01:15.9182739, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:10. coolingEstimate=01:01:15.9182739 [PrintingService.cs@1912] -06/10/2026 04:08:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.31147275329504;StartedAtUtc;07:45:53.8240706;08:41:39.2532861;00:55:45.4292155;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:28:40.4582492;01:01:15.9182739;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:08:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=112.12496566772461,printChamber1=112.12496566772461,printChamber2=112.12496566772461,printChamber3=112.12496566772461,printChamber4=112.12496566772461,surface=112.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:08:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.12496566772461. Used = 112.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:09:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1238174 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:09:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=132.82142639160156 that are outside of set tolerance 20 for current step target 112.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:09:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5407.1677097, PhaseTotal = 7303.5933384, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 89.58938359862269, Elapsed = 07:47:20.5404581, TimeTotal = 08:41:38.9545544, Remaining = 00:54:18.4140963, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:30:07.1746367, CoolingEstimate = 00:59:48.9031547, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:09. coolingEstimate=00:59:48.9031547 [PrintingService.cs@1912] -06/10/2026 04:09:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.58938359862269;StartedAtUtc;07:47:20.5404581;08:41:38.9545544;00:54:18.4140963;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:30:07.1746367;00:59:48.9031547;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:09:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=111.12496566772461,printChamber1=111.12496566772461,printChamber2=111.12496566772461,printChamber3=111.12496566772461,printChamber4=111.12496566772461,surface=111.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:09:51 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.12496566772461. Used = 111.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:10:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0051089 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:11:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0713792 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:11:17 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=131.7857208251953 that are outside of set tolerance 20 for current step target 111.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:11:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5493.8852632, PhaseTotal = 7304.5966062, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 89.85179609402412, Elapsed = 07:48:47.2580208, TimeTotal = 08:41:44.0576188, Remaining = 00:52:56.7995980, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:31:33.8921994, CoolingEstimate = 00:58:27.2886564, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:14. coolingEstimate=00:58:27.2886564 [PrintingService.cs@1912] -06/10/2026 04:11:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 89.85179609402412;StartedAtUtc;07:48:47.2580208;08:41:44.0576188;00:52:56.7995980;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:31:33.8921994;00:58:27.2886564;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:11:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=110.12496566772461,printChamber1=110.12496566772461,printChamber2=110.12496566772461,printChamber3=110.12496566772461,printChamber4=110.12496566772461,surface=110.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:11:18 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.12496566772461. Used = 110.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:12:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0114717 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:12:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 04:12:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 04:12:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 04:12:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 04:12:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 04:12:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 04:12:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=131.07142639160156 that are outside of set tolerance 20 for current step target 110.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:12:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5582.6031024, PhaseTotal = 7307.6001596, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 90.04639761498943, Elapsed = 07:50:15.9759540, TimeTotal = 08:42:14.9303263, Remaining = 00:51:58.9543723, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:33:02.6101326, CoolingEstimate = 00:57:29.4434307, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:45. coolingEstimate=00:57:29.4434307 [PrintingService.cs@1912] -06/10/2026 04:12:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.04639761498943;StartedAtUtc;07:50:15.9759540;08:42:14.9303263;00:51:58.9543723;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:33:02.6101326;00:57:29.4434307;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:12:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=109.12496566772461,printChamber1=109.12496566772461,printChamber2=109.12496566772461,printChamber3=109.12496566772461,printChamber4=109.12496566772461,surface=109.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:12:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.12496566772461. Used = 109.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:13:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1542238 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:14:12 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=130 that are outside of set tolerance 20 for current step target 109.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:14:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5670.3194832, PhaseTotal = 7309.6022547, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 90.32777797086855, Elapsed = 07:51:43.6922542, TimeTotal = 08:42:14.4276700, Remaining = 00:50:30.7354158, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:34:30.3264328, CoolingEstimate = 00:56:01.2244742, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:45. coolingEstimate=00:56:01.2244742 [PrintingService.cs@1912] -06/10/2026 04:14:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.32777797086855;StartedAtUtc;07:51:43.6922542;08:42:14.4276700;00:50:30.7354158;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:34:30.3264328;00:56:01.2244742;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:14:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=108.12496566772461,printChamber1=108.12496566772461,printChamber2=108.12496566772461,printChamber3=108.12496566772461,printChamber4=108.12496566772461,surface=108.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:14:14 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.12496566772461. Used = 108.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:14:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0196333 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:15:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1409336 ~ 6.04 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:15:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=129.0357208251953 that are outside of set tolerance 20 for current step target 108.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:15:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5758.0344851, PhaseTotal = 7311.6029709, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 90.6359788992502, Elapsed = 07:53:11.4072282, TimeTotal = 08:42:04.6544838, Remaining = 00:48:53.2472556, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:35:58.0414068, CoolingEstimate = 00:54:23.7363140, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:35. coolingEstimate=00:54:23.7363140 [PrintingService.cs@1912] -06/10/2026 04:15:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.6359788992502;StartedAtUtc;07:53:11.4072282;08:42:04.6544838;00:48:53.2472556;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:35:58.0414068;00:54:23.7363140;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:15:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=107.12496566772461,printChamber1=107.12496566772461,printChamber2=107.12496566772461,printChamber3=107.12496566772461,printChamber4=107.12496566772461,surface=107.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:15:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.12496566772461. Used = 107.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:16:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0198223 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:17:08 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=128.10714721679688 that are outside of set tolerance 20 for current step target 107.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:17:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5846.7517987, PhaseTotal = 7314.6059988, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 90.90091668422643, Elapsed = 07:54:40.1245399, TimeTotal = 08:42:10.9541628, Remaining = 00:47:30.8296229, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:37:26.7587185, CoolingEstimate = 00:53:01.3186813, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:41. coolingEstimate=00:53:01.3186813 [PrintingService.cs@1912] -06/10/2026 04:17:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 90.90091668422643;StartedAtUtc;07:54:40.1245399;08:42:10.9541628;00:47:30.8296229;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:37:26.7587185;00:53:01.3186813;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:17:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=106.12496566772461,printChamber1=106.12496566772461,printChamber2=106.12496566772461,printChamber3=106.12496566772461,printChamber4=106.12496566772461,surface=106.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:17:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.12496566772461. Used = 106.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:17:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1611569 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:17:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 04:17:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 04:17:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 04:17:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 04:17:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 04:17:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 04:18:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0400562 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:18:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=127 that are outside of set tolerance 20 for current step target 106.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:18:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 5941.4710349, PhaseTotal = 7323.6109493, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 91.14428235290819, Elapsed = 07:56:14.8437840, TimeTotal = 08:42:31.2192387, Remaining = 00:46:16.3754547, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:39:01.4779626, CoolingEstimate = 00:51:46.8645131, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:05:02. coolingEstimate=00:51:46.8645131 [PrintingService.cs@1912] -06/10/2026 04:18:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.14428235290819;StartedAtUtc;07:56:14.8437840;08:42:31.2192387;00:46:16.3754547;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:39:01.4779626;00:51:46.8645131;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:18:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=105.12496566772461,printChamber1=105.12496566772461,printChamber2=105.12496566772461,printChamber3=105.12496566772461,printChamber4=105.12496566772461,surface=105.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:18:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.12496566772461. Used = 105.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:19:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0657213 ~ 5.98 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:20:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=126 that are outside of set tolerance 20 for current step target 105.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:20:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1308909 ~ 6.04 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:20:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6034.1874307, PhaseTotal = 7330.6130594, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 91.40795225869311, Elapsed = 07:57:47.5602376, TimeTotal = 08:42:42.2168851, Remaining = 00:44:54.6566475, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:40:34.1944162, CoolingEstimate = 00:50:25.1457059, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:05:13. coolingEstimate=00:50:25.1457059 [PrintingService.cs@1912] -06/10/2026 04:20:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.40795225869311;StartedAtUtc;07:57:47.5602376;08:42:42.2168851;00:44:54.6566475;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:40:34.1944162;00:50:25.1457059;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:20:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=104.12496566772461,printChamber1=104.12496566772461,printChamber2=104.12496566772461,printChamber3=104.12496566772461,printChamber4=104.12496566772461,surface=104.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:20:18 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.12496566772461. Used = 104.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:21:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0087657 ~ 5.97 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:21:44 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=125.07142639160156 that are outside of set tolerance 20 for current step target 104.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:22:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6138.9046731, PhaseTotal = 7349.6160161, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 91.6827063733318, Elapsed = 07:59:32.2774895, TimeTotal = 08:43:02.4478221, Remaining = 00:43:30.1703326, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:42:18.9116681, CoolingEstimate = 00:49:00.6593910, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:05:33. coolingEstimate=00:49:00.6593910 [PrintingService.cs@1912] -06/10/2026 04:22:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.6827063733318;StartedAtUtc;07:59:32.2774895;08:43:02.4478221;00:43:30.1703326;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:42:18.9116681;00:49:00.6593910;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:22:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=103.12496566772461,printChamber1=103.12496566772461,printChamber2=103.12496566772461,printChamber3=103.12496566772461,printChamber4=103.12496566772461,surface=103.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:22:03 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.12496566772461. Used = 103.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:22:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0364200 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:23:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0010050 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:23:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=124.03571319580078 that are outside of set tolerance 20 for current step target 103.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:23:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6227.6195205, PhaseTotal = 7352.6165777, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 91.98275936349958, Elapsed = 08:01:00.9922618, TimeTotal = 08:42:56.5236676, Remaining = 00:41:55.5314058, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:43:47.6264404, CoolingEstimate = 00:47:26.0204642, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:05:27. coolingEstimate=00:47:26.0204642 [PrintingService.cs@1912] -06/10/2026 04:23:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 91.98275936349958;StartedAtUtc;08:01:00.9922618;08:42:56.5236676;00:41:55.5314058;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:43:47.6264404;00:47:26.0204642;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:23:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=102.12496566772461,printChamber1=102.12496566772461,printChamber2=102.12496566772461,printChamber3=102.12496566772461,printChamber4=102.12496566772461,surface=102.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:23:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.12496566772461. Used = 102.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:24:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0438160 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:24:57 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=123.10713958740234 that are outside of set tolerance 20 for current step target 102.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:25:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6330.3397236, PhaseTotal = 7369.6224951, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 92.25259181638002, Elapsed = 08:02:43.7124649, TimeTotal = 08:43:16.0961905, Remaining = 00:40:32.3837256, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:45:30.3466435, CoolingEstimate = 00:46:02.8727840, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:05:47. coolingEstimate=00:46:02.8727840 [PrintingService.cs@1912] -06/10/2026 04:25:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 92.25259181638002;StartedAtUtc;08:02:43.7124649;08:43:16.0961905;00:40:32.3837256;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:45:30.3466435;00:46:02.8727840;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:25:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=101.12496566772461,printChamber1=101.12496566772461,printChamber2=101.12496566772461,printChamber3=101.12496566772461,printChamber4=101.12496566772461,surface=101.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:25:14 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.12496566772461. Used = 101.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:25:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0958056 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:26:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0325917 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:26:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=122.07142639160156 that are outside of set tolerance 20 for current step target 101.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:27:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6444.0593912, PhaseTotal = 7397.627877, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 92.54162423679414, Elapsed = 08:04:37.4321444, TimeTotal = 08:43:40.9226218, Remaining = 00:39:03.4904774, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:47:24.0663230, CoolingEstimate = 00:44:33.9795358, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:06:11. coolingEstimate=00:44:33.9795358 [PrintingService.cs@1912] -06/10/2026 04:27:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 92.54162423679414;StartedAtUtc;08:04:37.4321444;08:43:40.9226218;00:39:03.4904774;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:47:24.0663230;00:44:33.9795358;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:27:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=100.12496566772461,printChamber1=100.12496566772461,printChamber2=100.12496566772461,printChamber3=100.12496566772461,printChamber4=100.12496566772461,surface=100.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:27:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.12496566772461. Used = 100.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:27:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0121244 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:28:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0361421 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:28:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=121 that are outside of set tolerance 20 for current step target 100.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:28:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6550.7746237, PhaseTotal = 7418.6288238, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 92.84482919012017, Elapsed = 08:06:24.1475128, TimeTotal = 08:43:53.2502600, Remaining = 00:37:29.1027472, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:49:10.7816914, CoolingEstimate = 00:42:59.5918056, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:06:24. coolingEstimate=00:42:59.5918056 [PrintingService.cs@1912] -06/10/2026 04:28:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 92.84482919012017;StartedAtUtc;08:06:24.1475128;08:43:53.2502600;00:37:29.1027472;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:49:10.7816914;00:42:59.5918056;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:28:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=99.12496566772461,printChamber1=99.12496566772461,printChamber2=99.12496566772461,printChamber3=99.12496566772461,printChamber4=99.12496566772461,surface=99.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:28:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.12496566772461. Used = 99.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:29:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0081969 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:30:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1067568 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:30:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=120.03571319580078 that are outside of set tolerance 20 for current step target 99.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:30:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6637.4908832, PhaseTotal = 7475.8830047, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 93.06445526762353, Elapsed = 08:07:50.8636359, TimeTotal = 08:44:12.2483925, Remaining = 00:36:21.3847566, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:50:37.4978145, CoolingEstimate = 00:41:51.8738150, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:06:43. coolingEstimate=00:41:51.8738150 [PrintingService.cs@1912] -06/10/2026 04:30:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 93.06445526762353;StartedAtUtc;08:07:50.8636359;08:44:12.2483925;00:36:21.3847566;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:50:37.4978145;00:41:51.8738150;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:30:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=98.12496566772461,printChamber1=98.12496566772461,printChamber2=98.12496566772461,printChamber3=98.12496566772461,printChamber4=98.12496566772461,surface=98.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:30:21 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 98.12496566772461. Used = 98.12496566772461 [SoftAnalysisSurfaceHeater.cs@881] -06/10/2026 04:31:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0064462 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:31:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=119.10713958740234 that are outside of set tolerance 20 for current step target 98.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6731.208022, PhaseTotal = 7548.171572, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 96.97508976452917, Elapsed = 08:09:24.5808040, TimeTotal = 08:24:40.5399565, Remaining = 00:15:15.9591525, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:52:11.2149826, CoolingEstimate = 00:20:46.4482109, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:47:11. coolingEstimate=00:20:46.4482109 [PrintingService.cs@1912] -06/10/2026 04:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 96.97508976452917;StartedAtUtc;08:09:24.5808040;08:24:40.5399565;00:15:15.9591525;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:52:11.2149826;00:20:46.4482109;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:31:55 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Cool-down surface target 100 reached, will disable surface and start cooling just chambers [ControlledHeating.cs@965] -06/10/2026 04:31:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=97.12496566772461,printChamber1=97.12496566772461,printChamber2=97.12496566772461,printChamber3=97.12496566772461,printChamber4=97.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:32:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=117.96428680419922 that are outside of set tolerance 20 for current step target 97.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:32:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0083224 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:33:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0216674 ~ 6.01 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:33:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6827.6466232, PhaseTotal = 7623.1816018, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.04506380170932, Elapsed = 08:11:01.0195393, TimeTotal = 08:25:58.0814780, Remaining = 00:14:57.0619387, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:53:47.6537179, CoolingEstimate = 00:20:27.5509971, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:48:28. coolingEstimate=00:20:27.5509971 [PrintingService.cs@1912] -06/10/2026 04:33:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.04506380170932;StartedAtUtc;08:11:01.0195393;08:25:58.0814780;00:14:57.0619387;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:53:47.6537179;00:20:27.5509971;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:33:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=96.12496566772461,printChamber1=96.12496566772461,printChamber2=96.12496566772461,printChamber3=96.12496566772461,printChamber4=96.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:33:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=117.07142639160156 that are outside of set tolerance 20 for current step target 96.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:34:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1065496 ~ 6.01 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:35:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1589714 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:35:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 6941.0751519, PhaseTotal = 7715.1815591, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.13523918423832, Elapsed = 08:12:54.4478960, TimeTotal = 08:27:26.6722318, Remaining = 00:14:32.2243358, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:55:41.0820746, CoolingEstimate = 00:20:02.7133942, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:49:57. coolingEstimate=00:20:02.7133942 [PrintingService.cs@1912] -06/10/2026 04:35:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.13523918423832;StartedAtUtc;08:12:54.4478960;08:27:26.6722318;00:14:32.2243358;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:55:41.0820746;00:20:02.7133942;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:35:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=95.12496566772461,printChamber1=95.12496566772461,printChamber2=95.12496566772461,printChamber3=95.12496566772461,printChamber4=95.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:35:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=115.89286041259766 that are outside of set tolerance 20 for current step target 95.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:36:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0334427 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:37:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7037.5115631, PhaseTotal = 7790.1893988, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.20061496272456, Elapsed = 08:14:30.8843091, TimeTotal = 08:28:45.4080136, Remaining = 00:14:14.5237045, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:57:17.5184877, CoolingEstimate = 00:19:45.0127629, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:51:16. coolingEstimate=00:19:45.0127629 [PrintingService.cs@1912] -06/10/2026 04:37:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.20061496272456;StartedAtUtc;08:14:30.8843091;08:28:45.4080136;00:14:14.5237045;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:57:17.5184877;00:19:45.0127629;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:37:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=94.12496566772461,printChamber1=94.12496566772461,printChamber2=94.12496566772461,printChamber3=94.12496566772461,printChamber4=94.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:37:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0161282 ~ 5.97 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:37:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=115.03571319580078 that are outside of set tolerance 20 for current step target 94.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:38:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.1226793 ~ 5.95 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:39:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7155.9382249, PhaseTotal = 7887.1874892, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.28953460280238, Elapsed = 08:16:29.3109662, TimeTotal = 08:30:19.2347284, Remaining = 00:13:49.9237622, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 01:59:15.9451448, CoolingEstimate = 00:19:20.4128206, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:52:50. coolingEstimate=00:19:20.4128206 [PrintingService.cs@1912] -06/10/2026 04:39:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.28953460280238;StartedAtUtc;08:16:29.3109662;08:30:19.2347284;00:13:49.9237622;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;01:59:15.9451448;00:19:20.4128206;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:39:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=93.12496566772461,printChamber1=93.12496566772461,printChamber2=93.12496566772461,printChamber3=93.12496566772461,printChamber4=93.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:39:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.1208836 ~ 5.94 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:39:21 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=114 that are outside of set tolerance 20 for current step target 93.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:40:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.1678536 ~ 5.92 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:40:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7254.3679502, PhaseTotal = 7964.1886431, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.36194953841898, Elapsed = 08:18:07.7406928, TimeTotal = 08:31:37.5577569, Remaining = 00:13:29.8170641, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:00:54.3748714, CoolingEstimate = 00:19:00.3061225, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:54:08. coolingEstimate=00:19:00.3061225 [PrintingService.cs@1912] -06/10/2026 04:40:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.36194953841898;StartedAtUtc;08:18:07.7406928;08:31:37.5577569;00:13:29.8170641;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:00:54.3748714;00:19:00.3061225;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:40:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=92.12496566772461,printChamber1=92.12496566772461,printChamber2=92.12496566772461,printChamber3=92.12496566772461,printChamber4=92.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:41:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=113.10713958740234 that are outside of set tolerance 20 for current step target 92.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:41:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 355 samples in 00:01:00.1389204 ~ 5.9 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:42:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 354 samples in 00:01:00.0891996 ~ 5.89 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:42:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7355.8042345, PhaseTotal = 8044.1963559, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.43277823995848, Elapsed = 08:19:49.1770513, TimeTotal = 08:32:59.3512543, Remaining = 00:13:10.1742030, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:02:35.8112299, CoolingEstimate = 00:18:40.6632614, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:55:30. coolingEstimate=00:18:40.6632614 [PrintingService.cs@1912] -06/10/2026 04:42:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.43277823995848;StartedAtUtc;08:19:49.1770513;08:32:59.3512543;00:13:10.1742030;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:02:35.8112299;00:18:40.6632614;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:42:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=91.12496566772461,printChamber1=91.12496566772461,printChamber2=91.12496566772461,printChamber3=91.12496566772461,printChamber4=91.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:42:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=112.10713958740234 that are outside of set tolerance 20 for current step target 91.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:42:58 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 04:43:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.0141017 ~ 5.87 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 04:44:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.1374735 ~ 5.85 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:44:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7477.2446044, PhaseTotal = 8144.2081544, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.5138956345894, Elapsed = 08:21:50.6173555, TimeTotal = 08:34:38.2837149, Remaining = 00:12:47.6663594, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:04:37.2515341, CoolingEstimate = 00:18:18.1554178, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:57:09. coolingEstimate=00:18:18.1554178 [PrintingService.cs@1912] -06/10/2026 04:44:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.5138956345894;StartedAtUtc;08:21:50.6173555;08:34:38.2837149;00:12:47.6663594;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:04:37.2515341;00:18:18.1554178;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:44:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=90.12496566772461,printChamber1=90.12496566772461,printChamber2=90.12496566772461,printChamber3=90.12496566772461,printChamber4=90.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:44:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=111.03571319580078 that are outside of set tolerance 20 for current step target 90.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:44:54 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 04:44:54 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 04:44:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 04:45:00 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 04:45:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.0023437 ~ 5.87 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:46:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7577.6716521, PhaseTotal = 8223.2066307, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.59115058523219, Elapsed = 08:23:31.0447975, TimeTotal = 08:35:56.7461971, Remaining = 00:12:25.7013996, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:06:17.6789761, CoolingEstimate = 00:17:56.1904580, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:58:27. coolingEstimate=00:17:56.1904580 [PrintingService.cs@1912] -06/10/2026 04:46:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.59115058523219;StartedAtUtc;08:23:31.0447975;08:35:56.7461971;00:12:25.7013996;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:06:17.6789761;00:17:56.1904580;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:46:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=89.12496566772461,printChamber1=89.12496566772461,printChamber2=89.12496566772461,printChamber3=89.12496566772461,printChamber4=89.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:46:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 354 samples in 00:01:00.1584016 ~ 5.88 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:46:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=110.10713958740234 that are outside of set tolerance 20 for current step target 89.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:47:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 350 samples in 00:01:00.1470362 ~ 5.82 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:47:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7677.0988513, PhaseTotal = 8301.2052585, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.66096679791833, Elapsed = 08:25:10.4717463, TimeTotal = 08:37:16.4240086, Remaining = 00:12:05.9522623, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:07:57.1059249, CoolingEstimate = 00:17:36.4413207, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 03:59:47. coolingEstimate=00:17:36.4413207 [PrintingService.cs@1912] -06/10/2026 04:47:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.66096679791833;StartedAtUtc;08:25:10.4717463;08:37:16.4240086;00:12:05.9522623;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:07:57.1059249;00:17:36.4413207;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:47:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=88.12496566772461,printChamber1=88.12496566772461,printChamber2=88.12496566772461,printChamber3=88.12496566772461,printChamber4=88.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:48:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=109.03571319580078 that are outside of set tolerance 20 for current step target 88.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:48:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.0498901 ~ 5.86 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:49:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 351 samples in 00:01:00.0523817 ~ 5.84 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:49:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7796.5328527, PhaseTotal = 8399.2106884, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.73924865742421, Elapsed = 08:27:09.9055976, TimeTotal = 08:38:53.7625525, Remaining = 00:11:43.8569549, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:09:56.5397762, CoolingEstimate = 00:17:14.3460133, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:01:24. coolingEstimate=00:17:14.3460133 [PrintingService.cs@1912] -06/10/2026 04:49:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.73924865742421;StartedAtUtc;08:27:09.9055976;08:38:53.7625525;00:11:43.8569549;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:09:56.5397762;00:17:14.3460133;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:49:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=87.12496566772461,printChamber1=87.12496566772461,printChamber2=87.12496566772461,printChamber3=87.12496566772461,printChamber4=87.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:50:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=107.96428680419922 that are outside of set tolerance 20 for current step target 87.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:50:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 350 samples in 00:01:00.0994926 ~ 5.82 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:51:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 349 samples in 00:01:00.0119664 ~ 5.82 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:51:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 7900.96242, PhaseTotal = 8482.2116843, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.81041630259848, Elapsed = 08:28:54.3353086, TimeTotal = 08:40:17.8768508, Remaining = 00:11:23.5415422, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:11:40.9694872, CoolingEstimate = 00:16:54.0306006, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:02:48. coolingEstimate=00:16:54.0306006 [PrintingService.cs@1912] -06/10/2026 04:51:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.81041630259848;StartedAtUtc;08:28:54.3353086;08:40:17.8768508;00:11:23.5415422;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:11:40.9694872;00:16:54.0306006;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:51:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=86.12496566772461,printChamber1=86.12496566772461,printChamber2=86.12496566772461,printChamber3=86.12496566772461,printChamber4=86.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:51:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=106.92857360839844 that are outside of set tolerance 20 for current step target 86.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:52:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 349 samples in 00:01:00.0889507 ~ 5.81 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:53:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 345 samples in 00:01:00.0877126 ~ 5.74 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:53:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8020.3973577, PhaseTotal = 8580.2180506, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.89673785747974, Elapsed = 08:30:53.7701375, TimeTotal = 08:41:52.3509612, Remaining = 00:10:58.5808237, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:13:40.4043161, CoolingEstimate = 00:16:29.0698821, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:04:23. coolingEstimate=00:16:29.0698821 [PrintingService.cs@1912] -06/10/2026 04:53:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.89673785747974;StartedAtUtc;08:30:53.7701375;08:41:52.3509612;00:10:58.5808237;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:13:40.4043161;00:16:29.0698821;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:53:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=85.12496566772461,printChamber1=85.12496566772461,printChamber2=85.12496566772461,printChamber3=85.12496566772461,printChamber4=85.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:53:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=106.07142639160156 that are outside of set tolerance 20 for current step target 85.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:54:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 345 samples in 00:01:00.1732305 ~ 5.73 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:55:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8116.8265577, PhaseTotal = 8655.2186791, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 97.9624851825762, Elapsed = 08:32:30.1993041, TimeTotal = 08:43:09.7705298, Remaining = 00:10:39.5712257, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:15:16.8334827, CoolingEstimate = 00:16:10.0602841, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:05:40. coolingEstimate=00:16:10.0602841 [PrintingService.cs@1912] -06/10/2026 04:55:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 97.9624851825762;StartedAtUtc;08:32:30.1993041;08:43:09.7705298;00:10:39.5712257;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:15:16.8334827;00:16:10.0602841;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:55:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=84.12496566772461,printChamber1=84.12496566772461,printChamber2=84.12496566772461,printChamber3=84.12496566772461,printChamber4=84.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:55:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 346 samples in 00:01:00.1730049 ~ 5.75 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:55:22 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=105.07142639160156 that are outside of set tolerance 20 for current step target 84.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:56:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 346 samples in 00:01:00.1214061 ~ 5.76 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:56:54 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 04:56:54 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 04:56:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8232.260217, PhaseTotal = 8749.223767, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.0395197307762, Elapsed = 08:34:25.6330753, TimeTotal = 08:44:42.8481005, Remaining = 00:10:17.2150252, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:17:12.2672539, CoolingEstimate = 00:15:47.7040836, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:07:13. coolingEstimate=00:15:47.7040836 [PrintingService.cs@1912] -06/10/2026 04:56:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.0395197307762;StartedAtUtc;08:34:25.6330753;08:44:42.8481005;00:10:17.2150252;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:17:12.2672539;00:15:47.7040836;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:56:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=83.12496566772461,printChamber1=83.12496566772461,printChamber2=83.12496566772461,printChamber3=83.12496566772461,printChamber4=83.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:57:17 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=104.07142639160156 that are outside of set tolerance 20 for current step target 83.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 04:57:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 345 samples in 00:01:00.1237577 ~ 5.74 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:58:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 344 samples in 00:01:00.1285945 ~ 5.72 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:59:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8356.6921589, PhaseTotal = 8852.2271375, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.12003403335942, Elapsed = 08:36:30.0650341, TimeTotal = 08:46:23.8302946, Remaining = 00:09:53.7652605, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:19:16.6992127, CoolingEstimate = 00:15:24.2543189, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:08:54. coolingEstimate=00:15:24.2543189 [PrintingService.cs@1912] -06/10/2026 04:59:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.12003403335942;StartedAtUtc;08:36:30.0650341;08:46:23.8302946;00:09:53.7652605;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:19:16.6992127;00:15:24.2543189;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 04:59:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=82.12496566772461,printChamber1=82.12496566772461,printChamber2=82.12496566772461,printChamber3=82.12496566772461,printChamber4=82.12496566772461 [ControlledHeating.cs@169] -06/10/2026 04:59:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 343 samples in 00:01:00.0671664 ~ 5.71 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 04:59:22 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=102.96428680419922 that are outside of set tolerance 20 for current step target 82.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:00:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 343 samples in 00:01:00.0844050 ~ 5.71 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:00:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8441.1189562, PhaseTotal = 8915.2253633, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.18680000168152, Elapsed = 08:37:54.4917014, TimeTotal = 08:47:28.3393907, Remaining = 00:09:33.8476893, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:20:41.1258800, CoolingEstimate = 00:15:04.3367477, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:09:59. coolingEstimate=00:15:04.3367477 [PrintingService.cs@1912] -06/10/2026 05:00:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.18680000168152;StartedAtUtc;08:37:54.4917014;08:47:28.3393907;00:09:33.8476893;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:20:41.1258800;00:15:04.3367477;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:00:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=81.12496566772461,printChamber1=81.12496566772461,printChamber2=81.12496566772461,printChamber3=81.12496566772461,printChamber4=81.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:00:30 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 05:00:30 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 05:00:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=102.03571319580078 that are outside of set tolerance 20 for current step target 81.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:01:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 340 samples in 00:01:00.1218187 ~ 5.66 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:02:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8546.553418, PhaseTotal = 8999.2312537, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.25544313584118, Elapsed = 08:39:39.9261588, TimeTotal = 08:48:53.5357347, Remaining = 00:09:13.6095759, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:22:26.5603374, CoolingEstimate = 00:14:44.0986343, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:11:24. coolingEstimate=00:14:44.0986343 [PrintingService.cs@1912] -06/10/2026 05:02:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.25544313584118;StartedAtUtc;08:39:39.9261588;08:48:53.5357347;00:09:13.6095759;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:22:26.5603374;00:14:44.0986343;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:02:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=80.12496566772461,printChamber1=80.12496566772461,printChamber2=80.12496566772461,printChamber3=80.12496566772461,printChamber4=80.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:02:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 339 samples in 00:01:00.0716175 ~ 5.64 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:02:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=101.10713958740234 that are outside of set tolerance 20 for current step target 80.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:03:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 341 samples in 00:01:00.1107019 ~ 5.67 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:03:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8654.9826371, PhaseTotal = 9086.2319014, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.33382403552076, Elapsed = 08:41:28.3553811, TimeTotal = 08:50:18.5077088, Remaining = 00:08:50.1523277, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:24:14.9895597, CoolingEstimate = 00:14:20.6413861, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:12:49. coolingEstimate=00:14:20.6413861 [PrintingService.cs@1912] -06/10/2026 05:03:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.33382403552076;StartedAtUtc;08:41:28.3553811;08:50:18.5077088;00:08:50.1523277;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:24:14.9895597;00:14:20.6413861;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:03:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=79.12496566772461,printChamber1=79.12496566772461,printChamber2=79.12496566772461,printChamber3=79.12496566772461,printChamber4=79.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:04:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=100.03571319580078 that are outside of set tolerance 20 for current step target 79.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:04:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 340 samples in 00:01:00.0603176 ~ 5.66 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:05:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 339 samples in 00:01:00.0174823 ~ 5.65 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:05:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8773.4107619, PhaseTotal = 9183.2314548, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.3989884321755, Elapsed = 08:43:26.7835474, TimeTotal = 08:51:57.7910747, Remaining = 00:08:31.0075273, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:26:13.4177260, CoolingEstimate = 00:14:01.4965857, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:14:28. coolingEstimate=00:14:01.4965857 [PrintingService.cs@1912] -06/10/2026 05:05:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.3989884321755;StartedAtUtc;08:43:26.7835474;08:51:57.7910747;00:08:31.0075273;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:26:13.4177260;00:14:01.4965857;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:05:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=78.12496566772461,printChamber1=78.12496566772461,printChamber2=78.12496566772461,printChamber3=78.12496566772461,printChamber4=78.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:06:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=99.10713958740234 that are outside of set tolerance 20 for current step target 78.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:06:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 339 samples in 00:01:00.1289130 ~ 5.64 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:07:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 338 samples in 00:01:00.1003556 ~ 5.62 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:07:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 8893.8386681, PhaseTotal = 9282.2307895, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.47474363325671, Elapsed = 08:45:27.2114408, TimeTotal = 08:53:35.5303559, Remaining = 00:08:08.3189151, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:28:13.8456194, CoolingEstimate = 00:13:38.8079735, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:16:06. coolingEstimate=00:13:38.8079735 [PrintingService.cs@1912] -06/10/2026 05:07:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.47474363325671;StartedAtUtc;08:45:27.2114408;08:53:35.5303559;00:08:08.3189151;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:28:13.8456194;00:13:38.8079735;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:07:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=77.12496566772461,printChamber1=77.12496566772461,printChamber2=77.12496566772461,printChamber3=77.12496566772461,printChamber4=77.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:08:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=98.03571319580078 that are outside of set tolerance 20 for current step target 77.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:08:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 338 samples in 00:01:00.1714824 ~ 5.62 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:09:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 334 samples in 00:01:00.0778153 ~ 5.56 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:09:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9006.2763715, PhaseTotal = 9373.2399215, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.53901898546098, Elapsed = 08:47:19.6491129, TimeTotal = 08:55:08.7518819, Remaining = 00:07:49.1027690, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:30:06.2832915, CoolingEstimate = 00:13:19.5918274, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:17:39. coolingEstimate=00:13:19.5918274 [PrintingService.cs@1912] -06/10/2026 05:09:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.53901898546098;StartedAtUtc;08:47:19.6491129;08:55:08.7518819;00:07:49.1027690;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:30:06.2832915;00:13:19.5918274;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:09:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=76.12496566772461,printChamber1=76.12496566772461,printChamber2=76.12496566772461,printChamber3=76.12496566772461,printChamber4=76.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:10:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=97.10713958740234 that are outside of set tolerance 20 for current step target 76.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:10:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 336 samples in 00:01:00.0614574 ~ 5.59 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:11:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 336 samples in 00:01:00.1051593 ~ 5.59 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:12:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9155.7104434, PhaseTotal = 9501.245422, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.61891236049183, Elapsed = 08:49:49.0831998, TimeTotal = 08:57:14.2666725, Remaining = 00:07:25.1834727, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:32:35.7173784, CoolingEstimate = 00:12:55.6725311, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:19:45. coolingEstimate=00:12:55.6725311 [PrintingService.cs@1912] -06/10/2026 05:12:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.61891236049183;StartedAtUtc;08:49:49.0831998;08:57:14.2666725;00:07:25.1834727;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:32:35.7173784;00:12:55.6725311;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:12:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=75.12496566772461,printChamber1=75.12496566772461,printChamber2=75.12496566772461,printChamber3=75.12496566772461,printChamber4=75.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:12:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 335 samples in 00:01:00.0694554 ~ 5.58 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:12:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=96.07142639160156 that are outside of set tolerance 20 for current step target 75.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:12:43 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 05:12:43 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 05:13:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 334 samples in 00:01:00.1148838 ~ 5.56 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:14:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 333 samples in 00:01:00.0246167 ~ 5.55 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:14:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9281.1627959, PhaseTotal = 9605.269203, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.68586232949079, Elapsed = 08:51:54.5355383, TimeTotal = 08:58:59.5213711, Remaining = 00:07:04.9858328, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:34:41.1697169, CoolingEstimate = 00:12:35.4748912, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:21:30. coolingEstimate=00:12:35.4748912 [PrintingService.cs@1912] -06/10/2026 05:14:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.68586232949079;StartedAtUtc;08:51:54.5355383;08:58:59.5213711;00:07:04.9858328;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:34:41.1697169;00:12:35.4748912;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:14:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=74.12496566772461,printChamber1=74.12496566772461,printChamber2=74.12496566772461,printChamber3=74.12496566772461,printChamber4=74.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:14:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=95.07142639160156 that are outside of set tolerance 20 for current step target 74.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:15:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 331 samples in 00:01:00.0273515 ~ 5.51 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:16:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 05:16:19 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 05:16:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9396.5990065, PhaseTotal = 9699.2768422, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.75027369129103, Elapsed = 08:53:49.9718514, TimeTotal = 09:00:35.3246367, Remaining = 00:06:45.3527853, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:36:36.6060300, CoolingEstimate = 00:12:15.8418437, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:23:06. coolingEstimate=00:12:15.8418437 [PrintingService.cs@1912] -06/10/2026 05:16:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.75027369129103;StartedAtUtc;08:53:49.9718514;09:00:35.3246367;00:06:45.3527853;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:36:36.6060300;00:12:15.8418437;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:16:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=73.12496566772461,printChamber1=73.12496566772461,printChamber2=73.12496566772461,printChamber3=73.12496566772461,printChamber4=73.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:16:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 331 samples in 00:01:00.1465560 ~ 5.5 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:16:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=94.10713958740234 that are outside of set tolerance 20 for current step target 73.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:17:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 331 samples in 00:01:00.0075555 ~ 5.52 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:18:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 331 samples in 00:01:00.0368973 ~ 5.51 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:18:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9533.0310615, PhaseTotal = 9814.2803258, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.82844268152789, Elapsed = 08:56:06.4039392, TimeTotal = 09:02:27.7191246, Remaining = 00:06:21.3151854, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:38:53.0381178, CoolingEstimate = 00:11:51.8042438, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:24:58. coolingEstimate=00:11:51.8042438 [PrintingService.cs@1912] -06/10/2026 05:18:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.82844268152789;StartedAtUtc;08:56:06.4039392;09:02:27.7191246;00:06:21.3151854;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:38:53.0381178;00:11:51.8042438;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:18:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=72.12496566772461,printChamber1=72.12496566772461,printChamber2=72.12496566772461,printChamber3=72.12496566772461,printChamber4=72.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:18:58 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=93.03571319580078 that are outside of set tolerance 20 for current step target 72.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:19:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 330 samples in 00:01:00.0371480 ~ 5.5 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:20:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 331 samples in 00:01:00.1367275 ~ 5.5 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:20:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9662.458672, PhaseTotal = 9922.2793648, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.90069712856227, Elapsed = 08:58:15.8314349, TimeTotal = 09:04:14.8066622, Remaining = 00:05:58.9752273, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:41:02.4656135, CoolingEstimate = 00:11:29.4642857, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:26:45. coolingEstimate=00:11:29.4642857 [PrintingService.cs@1912] -06/10/2026 05:20:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.90069712856227;StartedAtUtc;08:58:15.8314349;09:04:14.8066622;00:05:58.9752273;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:41:02.4656135;00:11:29.4642857;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:20:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=71.12496566772461,printChamber1=71.12496566772461,printChamber2=71.12496566772461,printChamber3=71.12496566772461,printChamber4=71.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:21:08 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=92 that are outside of set tolerance 20 for current step target 71.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:21:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 329 samples in 00:01:00.0200635 ~ 5.48 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:22:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 329 samples in 00:01:00.1877054 ~ 5.47 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:23:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9800.8866867, PhaseTotal = 10039.2788081, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 98.9616893778759, Elapsed = 09:00:34.2594312, TimeTotal = 09:06:14.5611813, Remaining = 00:05:40.3017501, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:43:20.8936098, CoolingEstimate = 00:11:10.7908085, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:28:45. coolingEstimate=00:11:10.7908085 [PrintingService.cs@1912] -06/10/2026 05:23:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 98.9616893778759;StartedAtUtc;09:00:34.2594312;09:06:14.5611813;00:05:40.3017501;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:43:20.8936098;00:11:10.7908085;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:23:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=70.12496566772461,printChamber1=70.12496566772461,printChamber2=70.12496566772461,printChamber3=70.12496566772461,printChamber4=70.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:23:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 327 samples in 00:01:00.0135612 ~ 5.45 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:23:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=91.10713958740234 that are outside of set tolerance 20 for current step target 70.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:24:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 328 samples in 00:01:00.1280880 ~ 5.46 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:24:32 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 05:24:32 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 05:25:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 326 samples in 00:01:00.0395814 ~ 5.43 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:25:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 9959.314664, PhaseTotal = 10176.278214, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.04056343102397, Elapsed = 09:03:12.6874073, TimeTotal = 09:08:28.4228504, Remaining = 00:05:15.7354431, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:45:59.3215859, CoolingEstimate = 00:10:46.2245015, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:30:59. coolingEstimate=00:10:46.2245015 [PrintingService.cs@1912] -06/10/2026 05:25:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.04056343102397;StartedAtUtc;09:03:12.6874073;09:08:28.4228504;00:05:15.7354431;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:45:59.3215859;00:10:46.2245015;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:25:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=69.12496566772461,printChamber1=69.12496566772461,printChamber2=69.12496566772461,printChamber3=69.12496566772461,printChamber4=69.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:26:05 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=89.96428680419922 that are outside of set tolerance 20 for current step target 69.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:26:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 326 samples in 00:01:00.0995543 ~ 5.42 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:27:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 325 samples in 00:01:00.1659272 ~ 5.4 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:27:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10092.7518381, PhaseTotal = 10288.2868167, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.10574443892448, Elapsed = 09:05:26.1245812, TimeTotal = 09:10:21.4204701, Remaining = 00:04:55.2958889, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:48:12.7587598, CoolingEstimate = 00:10:25.7849473, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:32:52. coolingEstimate=00:10:25.7849473 [PrintingService.cs@1912] -06/10/2026 05:27:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.10574443892448;StartedAtUtc;09:05:26.1245812;09:10:21.4204701;00:04:55.2958889;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:48:12.7587598;00:10:25.7849473;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:27:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=68.12496566772461,printChamber1=68.12496566772461,printChamber2=68.12496566772461,printChamber3=68.12496566772461,printChamber4=68.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:28:18 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=89.07142639160156 that are outside of set tolerance 20 for current step target 68.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:28:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 325 samples in 00:01:00.1770152 ~ 5.4 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:28:49 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 05:28:49 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 05:29:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 324 samples in 00:01:00.0952175 ~ 5.39 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:29:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10210.1870245, PhaseTotal = 10384.2934316, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.15655155616413, Elapsed = 09:07:23.5597663, TimeTotal = 09:12:02.9346431, Remaining = 00:04:39.3748768, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:50:10.1939449, CoolingEstimate = 00:10:09.8639352, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:34:33. coolingEstimate=00:10:09.8639352 [PrintingService.cs@1912] -06/10/2026 05:29:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.15655155616413;StartedAtUtc;09:07:23.5597663;09:12:02.9346431;00:04:39.3748768;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:50:10.1939449;00:10:09.8639352;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:29:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=67.12496566772461,printChamber1=67.12496566772461,printChamber2=67.12496566772461,printChamber3=67.12496566772461,printChamber4=67.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:30:15 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=88.10713958740234 that are outside of set tolerance 20 for current step target 67.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:30:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 323 samples in 00:01:00.1393212 ~ 5.37 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:31:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (97 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/10/2026 05:31:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 322 samples in 00:01:00.0744756 ~ 5.36 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:32:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10356.8463976, PhaseTotal = 10509.5242333, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.23202321100108, Elapsed = 09:09:50.2191426, TimeTotal = 09:14:05.5371513, Remaining = 00:04:15.3180087, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:52:36.8533212, CoolingEstimate = 00:09:45.8070671, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:36:36. coolingEstimate=00:09:45.8070671 [PrintingService.cs@1912] -06/10/2026 05:32:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.23202321100108;StartedAtUtc;09:09:50.2191426;09:14:05.5371513;00:04:15.3180087;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:52:36.8533212;00:09:45.8070671;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:32:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=66.12496566772461,printChamber1=66.12496566772461,printChamber2=66.12496566772461,printChamber3=66.12496566772461,printChamber4=66.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:32:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 322 samples in 00:01:00.0900146 ~ 5.36 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:32:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=87.10713958740234 that are outside of set tolerance 20 for current step target 66.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:33:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 322 samples in 00:01:00.0282732 ~ 5.36 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:34:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 322 samples in 00:01:00.1265109 ~ 5.36 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:35:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10520.2743513, PhaseTotal = 10651.5236156, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.29747069705249, Elapsed = 09:12:33.6470969, TimeTotal = 09:16:28.2090492, Remaining = 00:03:54.5619523, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:55:20.2812755, CoolingEstimate = 00:09:25.0510107, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:38:59. coolingEstimate=00:09:25.0510107 [PrintingService.cs@1912] -06/10/2026 05:35:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.29747069705249;StartedAtUtc;09:12:33.6470969;09:16:28.2090492;00:03:54.5619523;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:55:20.2812755;00:09:25.0510107;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:35:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=65.12496566772461,printChamber1=65.12496566772461,printChamber2=65.12496566772461,printChamber3=65.12496566772461,printChamber4=65.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:35:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 321 samples in 00:01:00.0311976 ~ 5.35 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:35:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=86.07142639160156 that are outside of set tolerance 20 for current step target 65.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:36:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 320 samples in 00:01:00.0421225 ~ 5.33 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:36:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/10/2026 05:37:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 319 samples in 00:01:00.0084573 ~ 5.32 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:37:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10675.7024279, PhaseTotal = 10785.5231207, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.36836140975697, Elapsed = 09:15:09.0751727, TimeTotal = 09:18:40.8055161, Remaining = 00:03:31.7303434, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 02:57:55.7093513, CoolingEstimate = 00:09:02.2194018, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:41:11. coolingEstimate=00:09:02.2194018 [PrintingService.cs@1912] -06/10/2026 05:37:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.36836140975697;StartedAtUtc;09:15:09.0751727;09:18:40.8055161;00:03:31.7303434;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;02:57:55.7093513;00:09:02.2194018;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:37:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=64.12496566772461,printChamber1=64.12496566772461,printChamber2=64.12496566772461,printChamber3=64.12496566772461,printChamber4=64.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:38:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=85 that are outside of set tolerance 20 for current step target 64.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:38:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 319 samples in 00:01:00.0882004 ~ 5.31 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:39:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 316 samples in 00:01:00.1378987 ~ 5.25 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:39:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10812.1406212, PhaseTotal = 10900.5327426, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.43135730083671, Elapsed = 09:17:25.5134803, TimeTotal = 09:20:36.7866116, Remaining = 00:03:11.2731313, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 03:00:12.1476589, CoolingEstimate = 00:08:41.7621897, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:43:07. coolingEstimate=00:08:41.7621897 [PrintingService.cs@1912] -06/10/2026 05:39:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.43135730083671;StartedAtUtc;09:17:25.5134803;09:20:36.7866116;00:03:11.2731313;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;03:00:12.1476589;00:08:41.7621897;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:39:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=63.12496566772461,printChamber1=63.12496566772461,printChamber2=63.12496566772461,printChamber3=63.12496566772461,printChamber4=63.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:40:17 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=84.07142639160156 that are outside of set tolerance 20 for current step target 63.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:40:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 318 samples in 00:01:00.0174925 ~ 5.3 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:40:27 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 05:40:27 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 05:41:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 316 samples in 00:01:00.1437613 ~ 5.25 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:42:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 315 samples in 00:01:00.0460011 ~ 5.25 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:42:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 10976.571619, PhaseTotal = 11043.535169, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.4969310241802, Elapsed = 09:20:09.9443686, TimeTotal = 09:22:59.8804673, Remaining = 00:02:49.9360987, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 03:02:56.5785472, CoolingEstimate = 00:08:20.4251571, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:45:30. coolingEstimate=00:08:20.4251571 [PrintingService.cs@1912] -06/10/2026 05:42:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.4969310241802;StartedAtUtc;09:20:09.9443686;09:22:59.8804673;00:02:49.9360987;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;03:02:56.5785472;00:08:20.4251571;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:42:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=62.12496566772461,printChamber1=62.12496566772461,printChamber2=62.12496566772461,printChamber3=62.12496566772461,printChamber4=62.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:42:59 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 05:43:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=83.03571319580078 that are outside of set tolerance 20 for current step target 62.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:43:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 315 samples in 00:01:00.0990337 ~ 5.24 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 05:44:03 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 05:44:03 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 05:44:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 314 samples in 00:01:00.0772727 ~ 5.23 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:45:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11134.9999652, PhaseTotal = 11180.5349437, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.55670901439996, Elapsed = 09:22:48.3729400, TimeTotal = 09:25:18.7316197, Remaining = 00:02:30.3586797, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 03:05:35.0071186, CoolingEstimate = 00:08:00.8477381, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:47:49. coolingEstimate=00:08:00.8477381 [PrintingService.cs@1912] -06/10/2026 05:45:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.55670901439996;StartedAtUtc;09:22:48.3729400;09:25:18.7316197;00:02:30.3586797;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;03:05:35.0071186;00:08:00.8477381;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:45:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=61.12496566772461,printChamber1=61.12496566772461,printChamber2=61.12496566772461,printChamber3=61.12496566772461,printChamber4=61.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:45:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 315 samples in 00:01:00.0505007 ~ 5.25 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:45:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=82.10713958740234 that are outside of set tolerance 20 for current step target 61.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:46:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 315 samples in 00:01:00.1609640 ~ 5.24 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:47:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11256.4316186, PhaseTotal = 11280.5380257, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.61922707218233, Elapsed = 09:24:49.8043892, TimeTotal = 09:26:59.3408293, Remaining = 00:02:09.5364401, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 03:07:36.4385678, CoolingEstimate = 00:07:40.0254985, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:49:30. coolingEstimate=00:07:40.0254985 [PrintingService.cs@1912] -06/10/2026 05:47:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.61922707218233;StartedAtUtc;09:24:49.8043892;09:26:59.3408293;00:02:09.5364401;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;03:07:36.4385678;00:07:40.0254985;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:47:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=60.12496566772461,printChamber1=60.12496566772461,printChamber2=60.12496566772461,printChamber3=60.12496566772461,printChamber4=60.12496566772461 [ControlledHeating.cs@169] -06/10/2026 05:47:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 314 samples in 00:01:00.0455987 ~ 5.23 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:47:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=81.10713958740234 that are outside of set tolerance 20 for current step target 60.12496566772461 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:48:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 313 samples in 00:01:00.0422117 ~ 5.21 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:49:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 312 samples in 00:01:00.1579985 ~ 5.19 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:50:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 309 samples in 00:01:00.0934478 ~ 5.14 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:51:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11481.8629725, PhaseTotal = 11484.5408082, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.70075097026806, Elapsed = 09:28:35.2357160, TimeTotal = 09:30:17.6316467, Remaining = 00:01:42.3959307, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 03:11:21.8698946, CoolingEstimate = 00:07:12.8849891, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:52:48. coolingEstimate=00:07:12.8849891 [PrintingService.cs@1912] -06/10/2026 05:51:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.70075097026806;StartedAtUtc;09:28:35.2357160;09:30:17.6316467;00:01:42.3959307;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;03:11:21.8698946;00:07:12.8849891;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:51:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting cool-down step target on printBed=60,printChamber1=60,printChamber2=60,printChamber3=60,printChamber4=60 [ControlledHeating.cs@169] -06/10/2026 05:51:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running cool-down for heaters printBed=80.03571319580078 that are outside of set tolerance 20 for current step target 60 and final target 60 [ControlledHeating.cs@205] -06/10/2026 05:51:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 312 samples in 00:01:00.0165565 ~ 5.2 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:51:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Cooling, PhaseDone = 11505.8632816, PhaseTotal = 11505.8632816, Estimate = PrintingEstimate { StartedAtUtc = 09/06/2026 19:23:12, Progress = 99.70075819111297, Elapsed = 09:28:59.2360256, TimeTotal = 09:30:41.7015126, Remaining = 00:01:42.4654870, Incomplete = False, SoftCount = 232, LayerPrintDone = 232, WeightsDone = 232, WeightDone = 01:35:39.3314505, WeightTotal = 01:35:39.3314505, WeightTotalEstimate = 01:35:39.3314505, LayerRecoatElapsed = 01:54:34.1458039, LayerRecoatDelays = 00:18:36, LayerRecoatPrintLayersElapsed = 01:04:01.7181885, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 01:34:49.9991559, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:24:20.4881960, CoolingElapsed = 03:11:45.8702042, CoolingEstimate = 00:07:12.9545454, HeatingElapsed = 02:46:59.8885670, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:45:42.6709591, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:04:49.7763919, PrintCapTotal = 00:04:37.1832990, JobElapsed = 02:38:58.0835675, JobTotal = 02:39:41.0496390, WeightEstimate = 00:00:00 }, JobName = D790 and D638 and Cards 2026_06_09 }. UTC calculatedEstimate: 06/10/2026 04:53:12. coolingEstimate=00:07:12.9545454 [PrintingService.cs@1912] -06/10/2026 05:51:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 99.70075819111297;StartedAtUtc;09:28:59.2360256;09:30:41.7015126;00:01:42.4654870;False;232;232;232;01:35:39.3314505;01:35:39.3314505;01:35:39.3314505;01:54:34.1458039;00:18:36;01:04:01.7181885;00:00:15.4788866;01:34:49.9991559;00:00:00.0274208;03:24:20.4881960;03:11:45.8702042;00:07:12.9545454;02:46:59.8885670;00:00:00;00:00:07.5000000;00:00:15;174;00:45:42.6709591;00:40:02.2552580;00:04:49.7763919;00:04:37.1832990;02:38:58.0835675;02:39:41.0496390 [PrintingService.cs@1918] -06/10/2026 05:51:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Reached final cool-down target 60 [ControlledHeating.cs@231] -06/10/2026 05:51:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Final cool-down target reached, disabling all heaters [ControlledHeating.cs@995] -06/10/2026 05:51:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Turning off heaters [PrintingService.cs@2257] -06/10/2026 05:51:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Finished [PrintingService.cs@2177] -06/10/2026 05:51:32 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Job succeeded: Job has finished successfully! [UIToastProvider.cs@98] -06/10/2026 05:52:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.1224257 ~ 5.92 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:53:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0259834 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:54:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1542843 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:55:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0038141 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:56:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1539416 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:57:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0128638 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:58:09 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 05:58:09 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 05:58:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0234704 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 05:59:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0149252 ~ 6.03 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:00:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0219913 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:01:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0175442 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:02:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1547182 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:03:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1658484 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:04:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1634104 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:05:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0055371 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:06:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1645090 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:06:38 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 06:06:38 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 06:07:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0141393 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:08:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1475470 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:09:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1497999 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:10:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1624602 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:11:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1498756 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:12:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1653105 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:13:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1524499 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:14:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1491622 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:15:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1666076 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:16:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1484460 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:17:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0145096 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:18:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1527479 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:19:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0246525 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:20:05 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 06:20:05 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 06:20:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0058189 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:21:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0089529 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:22:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0379973 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:23:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0063490 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:23:41 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 06:23:41 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 06:24:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0176062 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:24:30 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 06:24:30 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 06:25:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1605816 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:26:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1476835 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:27:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0291435 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:28:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0169744 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:28:48 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 06:28:48 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 06:29:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1638263 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:30:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1591329 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:31:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1599358 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:32:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0139594 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:33:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0053373 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:34:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1554666 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:35:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1588460 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:36:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0011612 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:37:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0075423 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:38:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1559937 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:38:55 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 06:38:55 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 06:39:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1523062 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:40:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0023576 ~ 6.05 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:41:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1629430 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:42:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0342801 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:42:59 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 06:43:12 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 06:43:12 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 06:43:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0029107 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 06:44:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1525469 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:45:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0191157 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:46:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0058619 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:47:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1481145 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:48:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0121439 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:49:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1679612 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:50:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1639787 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:51:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0249338 ~ 6.05 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:52:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1631876 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:53:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1623459 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:54:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1500193 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:55:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1637867 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:56:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0066074 ~ 6.02 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:57:29 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 06:57:29 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 06:57:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1604530 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:58:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1656159 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 06:59:30 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0191675 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:00:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1562830 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:01:05 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 07:01:05 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 07:01:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0060302 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:02:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1593174 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:03:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0165372 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:04:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1440528 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:05:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1429308 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:06:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1585529 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:07:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1629834 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:08:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0272218 ~ 6.05 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:09:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1560696 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:10:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1554683 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:11:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1447872 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:12:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1627585 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:12:50 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 07:12:50 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 07:13:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1489230 ~ 6 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:14:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0072949 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:15:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0140593 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:16:26 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 07:16:26 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 07:16:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0227083 ~ 6.06 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:17:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1635705 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:18:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1544036 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:19:33 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0043408 ~ 6.07 samples/sec, 467 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:19:39 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:19:39 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:20:13 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:20:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:20:52 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 07:20:52 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 07:21:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0292651 ~ 6.06 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:22:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0041777 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:23:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0020724 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:24:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0311385 ~ 6.06 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:25:09 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 07:25:09 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 07:25:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0136052 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:26:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0014226 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:27:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1617794 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:28:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0039786 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:29:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1505564 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:30:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1552019 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:31:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0216364 ~ 6.06 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:32:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0111162 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:33:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1601189 ~ 6.02 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:34:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0134144 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:35:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0042795 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:36:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1646947 ~ 6.07 samples/sec, 469 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:37:10 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:37:11 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:37:56 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 07:37:56 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 07:38:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0274494 ~ 6.06 samples/sec, 470 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:39:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0260328 ~ 6.06 samples/sec, 470 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:40:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0061887 ~ 6.07 samples/sec, 470 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:40:12 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:40:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:41:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1649834 ~ 6.07 samples/sec, 471 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:41:32 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 07:41:32 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 07:42:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0018438 ~ 6.07 samples/sec, 471 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:42:59 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 07:43:05 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:43:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:43:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:43:20 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 07:44:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1583431 ~ 6.07 samples/sec, 473 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:44:25 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:44:25 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:44:41 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:44:41 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:45:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0036334 ~ 6.07 samples/sec, 475 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:46:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0036487 ~ 6.07 samples/sec, 475 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:47:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1463705 ~ 6.07 samples/sec, 475 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:47:53 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:47:53 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:48:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1582929 ~ 6.07 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:49:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0135659 ~ 6.07 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:50:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1539588 ~ 6.07 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:51:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1631444 ~ 6.05 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:52:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1618937 ~ 6.02 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:53:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0266397 ~ 6.06 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:54:04 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 07:54:04 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 07:54:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0011807 ~ 6.07 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:55:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0208823 ~ 6.06 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:56:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0225161 ~ 6.06 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:57:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0328802 ~ 6.06 samples/sec, 476 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 07:58:06 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 07:58:06 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 07:58:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:58:20 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:58:34 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 07:58:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 07:59:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0065158 ~ 6.03 samples/sec, 478 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:00:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0048182 ~ 5.97 samples/sec, 478 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:01:00 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 08:01:00 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 08:01:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0114629 ~ 6.07 samples/sec, 478 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:02:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0210618 ~ 6.06 samples/sec, 478 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:03:13 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:03:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:04:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0129240 ~ 6 samples/sec, 479 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:05:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1590461 ~ 6.07 samples/sec, 479 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:05:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 08:05:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 08:06:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0127076 ~ 6 samples/sec, 479 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:07:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1420610 ~ 6.07 samples/sec, 479 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:08:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0046196 ~ 6.07 samples/sec, 479 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:08:22 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:08:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:09:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1557719 ~ 6 samples/sec, 480 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:10:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1440608 ~ 6.07 samples/sec, 480 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:11:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1457808 ~ 6.07 samples/sec, 480 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:12:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1613324 ~ 6.02 samples/sec, 480 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:13:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1603719 ~ 6.07 samples/sec, 480 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:14:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0148767 ~ 6.07 samples/sec, 480 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:15:05 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:15:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:16:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1539158 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:17:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0144815 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:17:32 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 08:17:32 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 08:18:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1647395 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:19:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0370955 ~ 6.06 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:20:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0081032 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:21:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0242674 ~ 6.01 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:21:08 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 08:21:08 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 08:22:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0036230 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:23:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0237799 ~ 6.06 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:24:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1635042 ~ 6.02 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:25:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0023196 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:26:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1500854 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:27:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1590352 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:28:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0039478 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:29:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1552399 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:30:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0054195 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:31:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0059787 ~ 6.07 samples/sec, 481 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:31:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:31:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:32:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1535541 ~ 6.07 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:33:41 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 08:33:41 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 08:33:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0165165 ~ 6.02 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:34:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0292087 ~ 6.06 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:35:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0147339 ~ 6.02 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:36:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0068453 ~ 6.07 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:37:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 08:37:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 08:37:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0052369 ~ 6.07 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:38:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1562047 ~ 6.07 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:39:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0140933 ~ 6.07 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:40:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0123167 ~ 6.07 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:41:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1560186 ~ 6.07 samples/sec, 482 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:42:12 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:42:12 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:43:00 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 08:43:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1553954 ~ 6.07 samples/sec, 483 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:43:28 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:43:28 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 08:44:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0210021 ~ 6.05 samples/sec, 484 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:45:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1564882 ~ 6.07 samples/sec, 484 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:46:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1085872 ~ 6.06 samples/sec, 484 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:47:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1537026 ~ 6.05 samples/sec, 484 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:48:13 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:48:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:49:03 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 08:49:03 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 08:49:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0176240 ~ 6.06 samples/sec, 485 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:50:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1648618 ~ 6.07 samples/sec, 485 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:51:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1573888 ~ 6.07 samples/sec, 485 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:52:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0063845 ~ 6.07 samples/sec, 485 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:52:23 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:52:23 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:52:39 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 08:52:39 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 08:53:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1616782 ~ 6.07 samples/sec, 486 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:54:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0226847 ~ 6.06 samples/sec, 486 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:55:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0158800 ~ 6.02 samples/sec, 486 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:55:25 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:55:25 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:55:36 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 08:55:36 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 08:56:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0261417 ~ 6.06 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:57:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1563542 ~ 6.07 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:58:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1638668 ~ 6.07 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 08:59:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0229929 ~ 6.06 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:00:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1607754 ~ 6.07 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:01:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0051839 ~ 6.07 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:02:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1501562 ~ 6.07 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:03:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0294801 ~ 6.06 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:04:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 09:04:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 09:04:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0075674 ~ 6.07 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:05:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1659431 ~ 6.07 samples/sec, 488 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:05:55 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:05:55 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:06:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0122852 ~ 6.07 samples/sec, 489 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:07:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0168981 ~ 6.06 samples/sec, 489 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:08:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 09:08:19 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 09:08:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0126574 ~ 6.07 samples/sec, 489 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:09:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0254312 ~ 6.01 samples/sec, 489 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:10:31 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:10:31 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:11:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1490626 ~ 6.07 samples/sec, 490 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:12:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0206263 ~ 6.06 samples/sec, 490 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:13:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0055498 ~ 6.07 samples/sec, 490 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:14:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1637209 ~ 6.07 samples/sec, 490 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:14:59 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:15:00 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:15:02 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:15:02 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:16:02 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1056463 ~ 6.04 samples/sec, 492 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:17:02 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1112414 ~ 6.07 samples/sec, 492 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:18:02 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1194548 ~ 6.07 samples/sec, 492 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:19:00 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:19:00 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:20:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1169210 ~ 6.07 samples/sec, 493 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:20:36 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 09:20:36 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 09:21:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1074507 ~ 6.07 samples/sec, 493 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:22:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1010833 ~ 6.06 samples/sec, 493 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:23:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1168303 ~ 6.07 samples/sec, 493 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:24:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1210076 ~ 6.07 samples/sec, 493 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:25:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1039559 ~ 6.07 samples/sec, 493 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:25:10 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:25:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:26:10 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1073866 ~ 6.07 samples/sec, 494 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:27:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0951134 ~ 6.07 samples/sec, 494 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:27:29 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 09:27:29 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 09:28:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1284150 ~ 6.07 samples/sec, 494 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:28:44 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:28:44 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:29:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1161178 ~ 6.07 samples/sec, 495 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:30:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0902093 ~ 6.07 samples/sec, 495 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:31:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1201239 ~ 6.07 samples/sec, 495 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:32:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0415349 ~ 6.06 samples/sec, 495 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:33:06 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:33:06 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:33:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 09:33:14 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 09:34:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1155986 ~ 6.07 samples/sec, 496 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:35:04 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:35:04 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:36:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1113294 ~ 6.07 samples/sec, 497 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:36:37 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:36:37 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:37:31 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 09:37:31 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 09:37:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1168775 ~ 6.07 samples/sec, 498 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:37:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:37:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:38:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1132416 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:39:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1139862 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:40:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1071738 ~ 6.06 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:41:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1098953 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:42:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1086026 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:43:00 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 09:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 09:43:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1184837 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:44:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1014850 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:45:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1052055 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:46:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1099116 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:47:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1053287 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:48:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1122243 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:49:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 09:49:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 09:49:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0914001 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:50:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1143449 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:51:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1290451 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:52:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1079505 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:53:43 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 09:53:43 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 09:53:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1128255 ~ 6.02 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:54:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1133350 ~ 6.07 samples/sec, 499 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:54:54 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 09:54:54 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 09:55:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1188901 ~ 6.07 samples/sec, 500 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:56:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1118206 ~ 6.02 samples/sec, 500 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:57:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1046712 ~ 6.07 samples/sec, 500 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:58:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1080503 ~ 6.02 samples/sec, 500 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 09:59:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1169844 ~ 6.07 samples/sec, 500 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:00:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1055446 ~ 6.07 samples/sec, 500 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:01:00 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:01:00 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:02:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1019956 ~ 6.07 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:03:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1115679 ~ 6.07 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:04:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1122231 ~ 6.07 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:05:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1088029 ~ 6.07 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:06:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1088571 ~ 6.07 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:06:51 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 10:06:51 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 10:07:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1152566 ~ 6.07 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:08:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1169062 ~ 6.07 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:09:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1006399 ~ 6.01 samples/sec, 501 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:09:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:09:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:10:01 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:10:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:10:54 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 10:10:54 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 10:11:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1286283 ~ 6.04 samples/sec, 503 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:12:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1187657 ~ 6.07 samples/sec, 503 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:12:23 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:12:23 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:13:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1062987 ~ 6.07 samples/sec, 504 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:14:16 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:14:16 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:15:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0984435 ~ 6.07 samples/sec, 505 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:15:18 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:15:18 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:16:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1222342 ~ 6.07 samples/sec, 506 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:16:21 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:16:21 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:17:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1069332 ~ 6.07 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:18:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0963840 ~ 6.04 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:19:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1206750 ~ 6.07 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:20:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1030939 ~ 6.07 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:21:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1322652 ~ 6.07 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:22:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1097479 ~ 6.07 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:23:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1175375 ~ 6.07 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:24:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1152090 ~ 6.07 samples/sec, 507 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:24:25 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 10:24:25 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 10:24:27 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:24:27 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:25:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:25:20 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:26:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1243887 ~ 6.07 samples/sec, 509 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:27:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1057664 ~ 6.07 samples/sec, 509 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:27:46 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:27:46 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:28:01 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 10:28:01 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 10:28:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1096858 ~ 6.07 samples/sec, 510 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:29:26 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:29:27 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:30:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1269981 ~ 6.07 samples/sec, 511 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:31:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1097149 ~ 6.07 samples/sec, 511 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:32:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1062316 ~ 6.07 samples/sec, 511 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:33:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1137579 ~ 6.07 samples/sec, 511 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:34:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1138571 ~ 6.07 samples/sec, 511 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:34:41 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 10:34:41 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 10:35:22 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:35:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:36:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1329145 ~ 6.07 samples/sec, 512 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:37:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1212865 ~ 6.07 samples/sec, 512 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:37:32 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:37:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:38:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1136172 ~ 6.07 samples/sec, 513 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:38:37 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:38:37 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:38:40 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:38:40 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:38:42 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:38:42 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:38:58 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 10:38:58 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 10:39:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1118403 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:40:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1226639 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:41:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1126927 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:42:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1014917 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:43:00 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 10:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 10:43:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1082115 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:44:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1142878 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:45:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0990860 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:46:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1217864 ~ 6.02 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:47:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1091543 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:48:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1046890 ~ 6.07 samples/sec, 516 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:49:23 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 10:49:23 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 10:50:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1191801 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:51:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1319678 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:51:48 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 10:51:48 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 10:52:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1001121 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:53:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1202680 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:54:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1350630 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:55:24 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 10:55:24 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 10:55:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1257054 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:56:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1462148 ~ 6.05 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:57:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1061270 ~ 6.01 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:58:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1256974 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 10:59:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1213119 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:00:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1019897 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:01:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1115192 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:02:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1059717 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:03:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1132740 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:04:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1013207 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:05:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1286871 ~ 6.07 samples/sec, 517 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:06:00 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:06:00 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:06:56 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 11:06:56 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 11:07:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1031513 ~ 6.06 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:08:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1159829 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:09:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1145935 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:10:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1300677 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:10:32 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 11:10:32 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 11:11:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1181124 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:12:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1065370 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:13:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1029553 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:14:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1137609 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:15:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1095597 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:16:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1082904 ~ 6.07 samples/sec, 518 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:16:56 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:16:56 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:17:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1113303 ~ 6.07 samples/sec, 519 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:18:25 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:18:25 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:18:57 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 11:18:57 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 11:19:09 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 11:19:09 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 11:19:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -37700 [McuMovementClient.cs@545] -06/10/2026 11:19:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/10/2026 11:19:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/10/2026 11:19:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:01.2166732. SinceCollect=08:39:55.4656690. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 64003102, XYCompressed = 5718033, LSource = 33030762, LCompressed = 1088972 } [McuMovementClient.cs@478] -06/10/2026 11:19:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=267461, gen1=40887, gen2=1894, LatencyMode=Interactive, FreeMemory=6020907008, Live=306044280, HeapSizeBytes=306927120, FragmentedBytes=948664, TotalCommittedBytes=307232768, PinnedObjectsCount=26, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/10/2026 11:19:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 16398113640341 (16398113640341 @ 0) for mcu = 136638.058775 [10/06/2026 01:38:49] (136650.94700284165 sec) to 20139342480922 (from now=20139222480922, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/10/2026 11:19:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0687870 ~ 5.99 samples/sec, 520 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:20:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0634816 ~ 6.08 samples/sec, 520 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:21:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0892283 ~ 6.07 samples/sec, 520 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:22:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0776118 ~ 6.08 samples/sec, 520 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:22:34 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 11:22:35 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 11:22:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/10/2026 11:22:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 11:22:35 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 11:22:35 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 11:23:15 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 11:23:15 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 11:23:24 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 11:23:24 DBUG [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 11:23:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1186045 ~ 6 samples/sec, 520 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:24:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0694316 ~ 6.03 samples/sec, 520 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:25:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0803822 ~ 6.08 samples/sec, 520 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:25:34 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:25:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:26:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0683366 ~ 6.03 samples/sec, 521 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:27:34 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0717823 ~ 6.08 samples/sec, 521 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:28:00 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:28:00 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:29:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0801423 ~ 6.08 samples/sec, 522 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:30:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0766046 ~ 6.08 samples/sec, 522 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:30:51 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:30:51 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:31:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0769629 ~ 6.03 samples/sec, 523 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:32:17 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:32:17 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:33:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0615241 ~ 6.08 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:34:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0961082 ~ 6.07 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:35:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0935262 ~ 6.07 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:35:41 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 11:35:41 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/10/2026 11:35:41 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] -06/10/2026 11:36:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0757056 ~ 6.08 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:37:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0912318 ~ 6.06 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:38:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0877021 ~ 6.07 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:39:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0830411 ~ 6.07 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:39:58 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 11:39:58 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 11:40:04 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 11:40:04 DBUG [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/10/2026 11:40:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0854735 ~ 6.07 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:41:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0811245 ~ 6.08 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:42:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0688235 ~ 6.08 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:43:01 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/10/2026 11:43:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0779981 ~ 6.08 samples/sec, 524 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:43:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/10/2026 11:44:13 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:44:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:44:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:44:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:45:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0784951 ~ 6.08 samples/sec, 526 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:45:58 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:45:58 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:46:29 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/10/2026 11:46:29 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:47:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0719124 ~ 6.08 samples/sec, 528 resets, 77 ignored frames) [Mlx90640Camera.cs@313] -06/10/2026 11:48:26 WARN [SLS4All.Compact.ComponentModel.PrinterLifetime] [0] Performing ShutdownSystem as requested! [PrinterLifetime.cs@106] -06/10/2026 11:48:26 INFO [Microsoft.Hosting.Lifetime] [0] Application is shutting down... -06/10/2026 11:48:26 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Exiting, trying to disable WatchDog [PrinterWatchDogMonitor.cs@165] -06/10/2026 11:48:26 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin stopped -06/10/2026 11:48:26 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Cancelled read loop [Mlx90640Camera.cs@326] -06/10/2026 11:48:26 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Saving movement state [MovementClientBase.cs@207] -06/10/2026 11:48:26 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Movement.MovementClientBaseSavedOptions.json [AppDataOptionsWriter.cs@86] -06/10/2026 11:48:26 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/10/2026 11:48:26 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Movement.MovementClientBaseSavedOptions.json [AppDataOptionsWriter.cs@138] -06/10/2026 11:48:26 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu has ended Run() [McuManager.cs@331] -06/10/2026 11:48:26 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host has ended Run() [McuManager.cs@331] -06/10/2026 11:48:26 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 has ended Run() [McuManager.cs@331] -06/10/2026 11:48:26 INFO [SLS4All.Compact.McuClient.McuManager] [0] All MCUs finished running -06/10/2026 11:48:26 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager finished running [McuPrinterClient.cs@231] -06/10/2026 11:48:26 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.PipedMcuProxyRunner[1] has been cancelled [McuPrinterClient.cs@170] -06/10/2026 11:48:27 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager reset [McuPrinterClient.cs@242] -06/10/2026 11:48:27 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.McuHostRunner[0] has been cancelled [McuPrinterClient.cs@170] -06/10/2026 11:48:33 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] -06/10/2026 11:48:33 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] -06/10/2026 11:48:33 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] -06/10/2026 11:48:33 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 06/10/2026 10:48:33 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] -06/10/2026 11:48:34 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/10/2026 11:48:34 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] -06/10/2026 11:48:34 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] -06/10/2026 11:48:34 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] -06/10/2026 11:48:34 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=48d9bb5c-fe54-4f8d-8dd9-2c47ea8b224f) -06/10/2026 11:48:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] -06/10/2026 11:48:34 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... -Waiting for exit signal... -Successfully set permissions. -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] -06/10/2026 11:48:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] -06/10/2026 11:48:34 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] -06/10/2026 11:48:34 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ -06/10/2026 11:48:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/10/2026 11:48:34 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] -06/10/2026 11:48:35 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] -06/10/2026 11:48:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] -06/10/2026 11:48:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] -06/10/2026 11:48:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/10/2026 11:48:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/10/2026 11:48:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] -06/10/2026 11:48:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] -06/10/2026 11:48:37 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 -06/10/2026 11:48:37 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. -06/10/2026 11:48:37 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 -06/10/2026 11:48:37 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current -06/10/2026 11:48:37 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] -06/10/2026 11:48:37 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: -/home/ppak/SLS4All/Current/appsettings.toml -/home/ppak/SLS4All/Current/appsettings.Inova.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml -/home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] -06/10/2026 11:48:41 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] -06/10/2026 11:48:41 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] -06/10/2026 11:48:41 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNM6RN9UAD2I, RemoteIpAddress = 127.0.0.1, RemotePort = 49912, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrckhG2TDv44YgnCEK5cQigpN_kKVRjx5F_pyu_xkOCjAFHBhr1TQmtcqLGeYTt_Yo95sf3LL-OlokwKK8Cp0cL7iCfXdNpy3nsegcIRwaGLViZxmoXI7P6jo1r7SquOxCvo_PSlIofmftf3US1sakjhfZQP4XY2vT5Vcm_4fLN7KaYkOEp0mqb8mR-ErSKPru9awQdspfs9o-vc7WCnHviIdfIgOgdjolrW7Ze9sv_w4eVCRQUP2moGsJQ-X7cjdlscqFbMYqGRFkAhlHJZGyjD-Dx5UiwY9GHnY4Xj6GiRbLlchYWv-yhN9BVnPQAJTsob_eIzyg7KNkPrm4llJge3X-SEPabrZedklC4PgKQQeHhi99d8L4ibkWdBtkarR4ll2en6TA5Ng2Wqd05XuCyQoPA1V2QewyijfoI3DY3J1EKIYJubLxe3XaAcsM8jdd_85vl0mQO2Ry7hsRCfrLoKDkxk1Hp1of0uZUG70HG1EbAMX4xNyDpt3M1_GlOjGnZQ]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrckhG2TDv44YgnCEK5cQigpN_kKVRjx5F_pyu_xkOCjAFHBhr1TQmtcqLGeYTt_Yo95sf3LL-OlokwKK8Cp0cL7iCfXdNpy3nsegcIRwaGLViZxmoXI7P6jo1r7SquOxCvo_PSlIofmftf3US1sakjhfZQP4XY2vT5Vcm_4fLN7KaYkOEp0mqb8mR-ErSKPru9awQdspfs9o-vc7WCnHviIdfIgOgdjolrW7Ze9sv_w4eVCRQUP2moGsJQ-X7cjdlscqFbMYqGRFkAhlHJZGyjD-Dx5UiwY9GHnY4Xj6GiRbLlchYWv-yhN9BVnPQAJTsob_eIzyg7KNkPrm4llJge3X-SEPabrZedklC4PgKQQeHhi99d8L4ibkWdBtkarR4ll2en6TA5Ng2Wqd05XuCyQoPA1V2QewyijfoI3DY3J1EKIYJubLxe3XaAcsM8jdd_85vl0mQO2Ry7hsRCfrLoKDkxk1Hp1of0uZUG70HG1EbAMX4xNyDpt3M1_GlOjGnZQ]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] -06/10/2026 11:48:41 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNM6RN9UAD2I, RemoteIpAddress = 127.0.0.1, RemotePort = 49912, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrckhG2TDv44YgnCEK5cQigpN_kKVRjx5F_pyu_xkOCjAFHBhr1TQmtcqLGeYTt_Yo95sf3LL-OlokwKK8Cp0cL7iCfXdNpy3nsegcIRwaGLViZxmoXI7P6jo1r7SquOxCvo_PSlIofmftf3US1sakjhfZQP4XY2vT5Vcm_4fLN7KaYkOEp0mqb8mR-ErSKPru9awQdspfs9o-vc7WCnHviIdfIgOgdjolrW7Ze9sv_w4eVCRQUP2moGsJQ-X7cjdlscqFbMYqGRFkAhlHJZGyjD-Dx5UiwY9GHnY4Xj6GiRbLlchYWv-yhN9BVnPQAJTsob_eIzyg7KNkPrm4llJge3X-SEPabrZedklC4PgKQQeHhi99d8L4ibkWdBtkarR4ll2en6TA5Ng2Wqd05XuCyQoPA1V2QewyijfoI3DY3J1EKIYJubLxe3XaAcsM8jdd_85vl0mQO2Ry7hsRCfrLoKDkxk1Hp1of0uZUG70HG1EbAMX4xNyDpt3M1_GlOjGnZQ]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrckhG2TDv44YgnCEK5cQigpN_kKVRjx5F_pyu_xkOCjAFHBhr1TQmtcqLGeYTt_Yo95sf3LL-OlokwKK8Cp0cL7iCfXdNpy3nsegcIRwaGLViZxmoXI7P6jo1r7SquOxCvo_PSlIofmftf3US1sakjhfZQP4XY2vT5Vcm_4fLN7KaYkOEp0mqb8mR-ErSKPru9awQdspfs9o-vc7WCnHviIdfIgOgdjolrW7Ze9sv_w4eVCRQUP2moGsJQ-X7cjdlscqFbMYqGRFkAhlHJZGyjD-Dx5UiwY9GHnY4Xj6GiRbLlchYWv-yhN9BVnPQAJTsob_eIzyg7KNkPrm4llJge3X-SEPabrZedklC4PgKQQeHhi99d8L4ibkWdBtkarR4ll2en6TA5Ng2Wqd05XuCyQoPA1V2QewyijfoI3DY3J1EKIYJubLxe3XaAcsM8jdd_85vl0mQO2Ry7hsRCfrLoKDkxk1Hp1of0uZUG70HG1EbAMX4xNyDpt3M1_GlOjGnZQ]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] -06/10/2026 11:48:41 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNM6RN9UAD2I, RemoteIpAddress = 127.0.0.1, RemotePort = 49912, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrckhG2TDv44YgnCEK5cQigpN_kKVRjx5F_pyu_xkOCjAFHBhr1TQmtcqLGeYTt_Yo95sf3LL-OlokwKK8Cp0cL7iCfXdNpy3nsegcIRwaGLViZxmoXI7P6jo1r7SquOxCvo_PSlIofmftf3US1sakjhfZQP4XY2vT5Vcm_4fLN7KaYkOEp0mqb8mR-ErSKPru9awQdspfs9o-vc7WCnHviIdfIgOgdjolrW7Ze9sv_w4eVCRQUP2moGsJQ-X7cjdlscqFbMYqGRFkAhlHJZGyjD-Dx5UiwY9GHnY4Xj6GiRbLlchYWv-yhN9BVnPQAJTsob_eIzyg7KNkPrm4llJge3X-SEPabrZedklC4PgKQQeHhi99d8L4ibkWdBtkarR4ll2en6TA5Ng2Wqd05XuCyQoPA1V2QewyijfoI3DY3J1EKIYJubLxe3XaAcsM8jdd_85vl0mQO2Ry7hsRCfrLoKDkxk1Hp1of0uZUG70HG1EbAMX4xNyDpt3M1_GlOjGnZQ]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrckhG2TDv44YgnCEK5cQigpN_kKVRjx5F_pyu_xkOCjAFHBhr1TQmtcqLGeYTt_Yo95sf3LL-OlokwKK8Cp0cL7iCfXdNpy3nsegcIRwaGLViZxmoXI7P6jo1r7SquOxCvo_PSlIofmftf3US1sakjhfZQP4XY2vT5Vcm_4fLN7KaYkOEp0mqb8mR-ErSKPru9awQdspfs9o-vc7WCnHviIdfIgOgdjolrW7Ze9sv_w4eVCRQUP2moGsJQ-X7cjdlscqFbMYqGRFkAhlHJZGyjD-Dx5UiwY9GHnY4Xj6GiRbLlchYWv-yhN9BVnPQAJTsob_eIzyg7KNkPrm4llJge3X-SEPabrZedklC4PgKQQeHhi99d8L4ibkWdBtkarR4ll2en6TA5Ng2Wqd05XuCyQoPA1V2QewyijfoI3DY3J1EKIYJubLxe3XaAcsM8jdd_85vl0mQO2Ry7hsRCfrLoKDkxk1Hp1of0uZUG70HG1EbAMX4xNyDpt3M1_GlOjGnZQ]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] -06/10/2026 11:48:42 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] -06/10/2026 11:48:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] -06/10/2026 11:48:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] -06/10/2026 11:48:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] -06/10/2026 11:48:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/10/2026 11:48:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/10/2026 11:48:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] -06/10/2026 11:48:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] -06/10/2026 11:48:43 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] -06/10/2026 11:48:43 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/15a7210d-7952-4049-9a04-752cabecc02a.sh [SystemPrinterHostname.cs@140] -06/10/2026 11:48:43 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] -06/10/2026 11:48:45 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] -06/10/2026 11:48:45 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] -06/10/2026 11:48:45 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] -06/10/2026 11:48:46 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] -06/10/2026 11:48:46 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] -06/10/2026 11:48:47 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] -06/10/2026 11:48:47 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! -06/10/2026 11:48:47 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3625965. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=470, gen1=83, gen2=10, LatencyMode=Interactive, FreeMemory=6572408832, Live=292183928, HeapSizeBytes=296083944, FragmentedBytes=4491264, TotalCommittedBytes=327106560, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/10/2026 11:48:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630941. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0655475. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/10/2026 11:48:47 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/10/2026 11:48:47 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] -06/10/2026 11:48:47 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] -06/10/2026 11:48:50 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] -06/13/2026 15:43:18 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/13/2026 15:43:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0866517 ~ 6.01 samples/sec, 1 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:44:11 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] -06/13/2026 15:44:11 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/13/2026 15:44:11 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/13/2026 15:44:18 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Stopping generator [LazyDataGenerator.cs@93] -06/13/2026 15:44:18 DBUG [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/13/2026 15:44:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0787775 ~ 6.08 samples/sec, 1 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:44:23 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/13/2026 15:44:23 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/13/2026 15:45:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.1028784 ~ 6.04 samples/sec, 1 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:45:35 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"00000000-0000-0000-0000-000000000000","IsEmpty":true},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:45:35 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"00000000-0000-0000-0000-000000000000","IsEmpty":true},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:45:40 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"00000000-0000-0000-0000-000000000000","IsEmpty":true},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:45:49 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:45:54 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:45:56 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:00 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:00 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:05 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:05 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.0086444 (0.0086444). Stats=NestingStats { ZMax = 3.299999952316284, ChamberVolume = 73179.9453125, SinteredVolume = 9064.6171875, Density = 0.12386750425668405 } [ExhaustiveNester.cs@1820] -06/13/2026 15:46:05 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:00.3563817 [CurrentJobAutomatic.razor.cs@103] -06/13/2026 15:46:06 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":null,"ChamberVolume":null,"SinteredVolume":null,"AvailableDepth":null},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:09 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:09 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:12 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:12 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.0177701 (0.0177701). Stats=NestingStats { ZMax = 23.30000114440918, ChamberVolume = 516694.78125, SinteredVolume = 45323.0859375, Density = 0.08771732864778185 } [ExhaustiveNester.cs@1820] -06/13/2026 15:46:12 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:00.1713765 [CurrentJobAutomatic.razor.cs@103] -06/13/2026 15:46:12 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":3.3,"ChamberVolume":73179.945,"SinteredVolume":9064.617,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:18 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 355 samples in 00:01:00.1129719 ~ 5.91 samples/sec, 1 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:46:23 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:26 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:26 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:26 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:26 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:26 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:27 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:27 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:27 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:28 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:30 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:46:31 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.0505996 (0.0505996). Stats=NestingStats { ZMax = 23.30000114440918, ChamberVolume = 516694.78125, SinteredVolume = 79855.6640625, Density = 0.1545509398591395 } [ExhaustiveNester.cs@1820] -06/13/2026 15:46:31 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:00.9997579 [CurrentJobAutomatic.razor.cs@103] -06/13/2026 15:46:31 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":79855.664,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":45323.086,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/13/2026 15:47:18 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 15:47:18 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 15:48:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.1631966 ~ 5.93 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:48:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 15:48:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3292906. SinceCollect=00:06:01.9340418. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 15:48:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=974, gen1=148, gen2=31, LatencyMode=Interactive, FreeMemory=6394150912, Live=259475064, HeapSizeBytes=259580144, FragmentedBytes=343616, TotalCommittedBytes=262356992, PinnedObjectsCount=24, MemoryLoadBytes=2197157314, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 15:48:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] -06/13/2026 15:48:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0146028. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 48628972967 (from now=48508972967, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 48772088150 (from now=48652088150, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 48772088150 (from now=48652088150, flags=None, requested=48772088150 (48772088150 @ 0) for mcu = 391.838038 [10/06/2026 10:54:51] (406.43406791666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 48772088150 (from now=48652088150, flags=None, requested=48772088150 (48772088150 @ 0) for mcu = 391.838038 [10/06/2026 10:54:51] (406.43406791666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1991420. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:02.4417237. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 48796088150 (48796088150 @ 0) for mcu = 392.038055 [10/06/2026 10:54:51] (406.63406791666665 sec) to 48919117541 (from now=48799117541, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.6839607. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.6978372. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z1 by distance -210000 [McuMovementClient.cs@545] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.7092730. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 48796088150 (48796088150 @ 0) for mcu = 392.038044 [10/06/2026 10:54:51] (406.63406791666665 sec) to 49071114092 (from now=48951114092, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 49194204499 (from now=49074204499, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 48796088150 (48796088150 @ 0) for mcu = 392.038060 [10/06/2026 10:54:51] (406.63406791666665 sec) to 49194204499 (from external timestamp, flags=None, requested=49194204499 (49194204499 @ 0) for mcu = 395.355721 [10/06/2026 10:54:55] (409.9517041583333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:48:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 49194204499 (from now=49074204499, flags=None, requested=49194204499 (49194204499 @ 0) for mcu = 395.355721 [10/06/2026 10:54:55] (409.9517041583333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6625287. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.4254808. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 49274204499 (49274204499 @ 0) for mcu = 396.022410 [10/06/2026 10:54:55] (410.618370825 sec) to 49397270744 (from now=49277270744, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.2496452. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.2612150. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -210000 [McuMovementClient.cs@545] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.2737461. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 49274204499 (49274204499 @ 0) for mcu = 396.022388 [10/06/2026 10:54:55] (410.618370825 sec) to 49619053061 (from now=49499053061, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 49742148812 (from now=49622148812, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 49742148812 (from now=49622148812, flags=None, requested=49742148812 (49742148812 @ 0) for mcu = 399.921967 [10/06/2026 10:54:59] (414.51790676666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 49274204499 (49274204499 @ 0) for mcu = 396.022402 [10/06/2026 10:54:55] (410.618370825 sec) to 49742148812 (from external timestamp, flags=None, requested=49742148812 (49742148812 @ 0) for mcu = 399.921967 [10/06/2026 10:54:59] (414.51790676666667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:48:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6653467. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.9929674. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 49822148812 (49822148812 @ 0) for mcu = 400.588606 [10/06/2026 10:55:00] (415.18457343333336 sec) to 49945313380 (from now=49825313380, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.7065627. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 49822148812 (49822148812 @ 0) for mcu = 400.588579 [10/06/2026 10:55:00] (415.18457343333336 sec) to 50643901979 (from now=50523901979, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 50643901979 (from now=50523901979, flags=None, requested=50643901979 (50643901979 @ 0) for mcu = 407.436567 [10/06/2026 10:55:07] (422.0325164916667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 49822148812 (49822148812 @ 0) for mcu = 400.588579 [10/06/2026 10:55:00] (415.18457343333336 sec) to 50643901979 (from external timestamp, flags=None, requested=50643901979 (50643901979 @ 0) for mcu = 407.436567 [10/06/2026 10:55:07] (422.0325164916667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:48:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:48:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.3106928. Loops = 38. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:26.2137505. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:48:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 51648909479 (51648909479 @ 0) for mcu = 415.811671 [10/06/2026 10:55:15] (430.40757899166664 sec) to 51770235814 (from now=51650235814, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:48:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 51648909479 (51648909479 @ 0) for mcu = 415.811671 [10/06/2026 10:55:15] (430.40757899166664 sec) to 51770235814 (from external timestamp, flags=None, requested=51770235814 (51770235814 @ 0) for mcu = 416.822730 [10/06/2026 10:55:16] (431.41863178333335 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:48:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 51648909479 (51648909479 @ 0) for mcu = 415.811671 [10/06/2026 10:55:15] (430.40757899166664 sec) to 51770235814 (from external timestamp, flags=None, requested=51770235814 (51770235814 @ 0) for mcu = 416.822730 [10/06/2026 10:55:16] (431.41863178333335 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:48:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:49:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1430755. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.3646203. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:49:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1420415 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:50:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Starting [LayerClient.cs@629] -06/13/2026 15:50:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:50:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 15:50:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2701786. SinceCollect=00:01:30.1851337. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 15:50:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1056, gen1=155, gen2=32, LatencyMode=Interactive, FreeMemory=6563872768, Live=258506512, HeapSizeBytes=259155064, FragmentedBytes=910776, TotalCommittedBytes=262782976, PinnedObjectsCount=24, MemoryLoadBytes=2028145213, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 15:50:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 51787035814 (51787035814 @ 0) for mcu = 416.962726 [10/06/2026 10:55:16] (431.55863178333334 sec) to 59446813618 (from now=59326813618, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:50:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 51787035814 (51787035814 @ 0) for mcu = 416.962726 [10/06/2026 10:55:16] (431.55863178333334 sec) to 59446813618 (from external timestamp, flags=None, requested=59446813618 (59446813618 @ 0) for mcu = 480.794631 [10/06/2026 10:56:20] (495.3901134833333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 51787035814 (51787035814 @ 0) for mcu = 416.962726 [10/06/2026 10:55:16] (431.55863178333334 sec) to 59446813618 (from external timestamp, flags=None, requested=59446813618 (59446813618 @ 0) for mcu = 480.794631 [10/06/2026 10:56:20] (495.3901134833333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:50:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7447874. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:09.8249169. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:50:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 60504453424 (60504453424 @ 0) for mcu = 489.608351 [10/06/2026 10:56:29] (504.2037785333333 sec) to 60625834878 (from now=60505834878, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:50:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 60504453424 (60504453424 @ 0) for mcu = 489.608351 [10/06/2026 10:56:29] (504.2037785333333 sec) to 60625834878 (from external timestamp, flags=None, requested=60625834878 (60625834878 @ 0) for mcu = 490.619870 [10/06/2026 10:56:30] (505.21529065 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 60504453424 (60504453424 @ 0) for mcu = 489.608351 [10/06/2026 10:56:29] (504.2037785333333 sec) to 60625834878 (from external timestamp, flags=None, requested=60625834878 (60625834878 @ 0) for mcu = 490.619870 [10/06/2026 10:56:30] (505.21529065 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:50:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0597730 ~ 6.06 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:50:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7333976. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6398068. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:50:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 61681874684 (61681874684 @ 0) for mcu = 499.420210 [10/06/2026 10:56:39] (514.0156223666667 sec) to 61803446091 (from now=61683446091, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:50:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 61681874684 (61681874684 @ 0) for mcu = 499.420210 [10/06/2026 10:56:39] (514.0156223666667 sec) to 61803446091 (from external timestamp, flags=None, requested=61803446091 (61803446091 @ 0) for mcu = 500.433311 [10/06/2026 10:56:40] (515.028717425 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 61681874684 (61681874684 @ 0) for mcu = 499.420210 [10/06/2026 10:56:39] (514.0156223666667 sec) to 61803446091 (from external timestamp, flags=None, requested=61803446091 (61803446091 @ 0) for mcu = 500.433311 [10/06/2026 10:56:40] (515.028717425 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:50:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7303272. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.4524027. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:50:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 62859485897 (62859485897 @ 0) for mcu = 509.233732 [10/06/2026 10:56:49] (523.8290491416667 sec) to 62980987628 (from now=62860987628, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:50:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 62859485897 (62859485897 @ 0) for mcu = 509.233732 [10/06/2026 10:56:49] (523.8290491416667 sec) to 62980987628 (from external timestamp, flags=None, requested=62980987628 (62980987628 @ 0) for mcu = 510.246253 [10/06/2026 10:56:50] (524.8415635666667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 62859485897 (62859485897 @ 0) for mcu = 509.233732 [10/06/2026 10:56:49] (523.8290491416667 sec) to 62980987628 (from external timestamp, flags=None, requested=62980987628 (62980987628 @ 0) for mcu = 510.246253 [10/06/2026 10:56:50] (524.8415635666667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:50:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7312310. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.2638488. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:50:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 64037027434 (64037027434 @ 0) for mcu = 519.046715 [10/06/2026 10:56:58] (533.6418952833334 sec) to 64158386240 (from now=64038386240, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:50:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 64037027434 (64037027434 @ 0) for mcu = 519.046715 [10/06/2026 10:56:58] (533.6418952833334 sec) to 64158386240 (from external timestamp, flags=None, requested=64158386240 (64158386240 @ 0) for mcu = 520.058045 [10/06/2026 10:56:59] (534.6532186666667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 64037027434 (64037027434 @ 0) for mcu = 519.046715 [10/06/2026 10:56:58] (533.6418952833334 sec) to 64158386240 (from external timestamp, flags=None, requested=64158386240 (64158386240 @ 0) for mcu = 520.058045 [10/06/2026 10:56:59] (534.6532186666667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:50:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7319768. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.0778582. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:50:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Completed [LayerClient.cs@681] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4897671. SinceCollect=00:01:03.6431553. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1115, gen1=160, gen2=33, LatencyMode=Interactive, FreeMemory=6570049536, Live=257932224, HeapSizeBytes=258377912, FragmentedBytes=899528, TotalCommittedBytes=262782976, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633789. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0655118. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0804551. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:51:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 119.42340175052466, Z2 = 150 } } [LayerClient.cs@969] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 65214426046 (65214426046 @ 0) for mcu = 528.858588 [10/06/2026 10:57:08] (543.4535503833333 sec) to 67094082596 (from now=66974082596, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 65214426046 (65214426046 @ 0) for mcu = 528.858588 [10/06/2026 10:57:08] (543.4535503833333 sec) to 67094082596 (from external timestamp, flags=None, requested=67094082596 (67094082596 @ 0) for mcu = 544.522554 [10/06/2026 10:57:24] (559.1173549666667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 65214426046 (65214426046 @ 0) for mcu = 528.858588 [10/06/2026 10:57:08] (543.4535503833333 sec) to 67094082596 (from external timestamp, flags=None, requested=67094082596 (67094082596 @ 0) for mcu = 544.522554 [10/06/2026 10:57:24] (559.1173549666667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:51:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2608846. Loops = 34. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.4218634. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:51:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] -06/13/2026 15:51:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 15:51:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0200568 ~ 6.03 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.8912840. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634181. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.9588018. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.9690526. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:51:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 238.84680350104932, Z2 = 300 } } [LayerClient.cs@969] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 67972911462 (67972911462 @ 0) for mcu = 551.846612 [10/06/2026 10:57:31] (566.44092885 sec) to 70680038200 (from now=70560038200, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 67972911462 (67972911462 @ 0) for mcu = 551.846612 [10/06/2026 10:57:31] (566.44092885 sec) to 70680038200 (from external timestamp, flags=None, requested=70680038200 (70680038200 @ 0) for mcu = 574.406409 [10/06/2026 10:57:54] (589.0003183333333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 67972911462 (67972911462 @ 0) for mcu = 551.846612 [10/06/2026 10:57:31] (566.44092885 sec) to 70680038200 (from external timestamp, flags=None, requested=70680038200 (70680038200 @ 0) for mcu = 574.406409 [10/06/2026 10:57:54] (589.0003183333333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:51:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2500000. Loops = 33. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.2977921. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:51:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] -06/13/2026 15:51:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 15:52:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2788080. SinceCollect=00:01:01.9514899. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1172, gen1=165, gen2=34, LatencyMode=Interactive, FreeMemory=6532399104, Live=257665944, HeapSizeBytes=258353408, FragmentedBytes=921024, TotalCommittedBytes=263045120, PinnedObjectsCount=24, MemoryLoadBytes=2028145213, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 71558867066 (71558867066 @ 0) for mcu = 581.730217 [10/06/2026 10:58:01] (596.3238922166666 sec) to 74517818275 (from now=74397818275, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 71558867066 (71558867066 @ 0) for mcu = 581.730217 [10/06/2026 10:58:01] (596.3238922166666 sec) to 74517818275 (from external timestamp, flags=None, requested=74517818275 (74517818275 @ 0) for mcu = 606.388625 [10/06/2026 10:58:26] (620.9818189583333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 71558867066 (71558867066 @ 0) for mcu = 581.730217 [10/06/2026 10:58:01] (596.3238922166666 sec) to 74517818275 (from external timestamp, flags=None, requested=74517818275 (74517818275 @ 0) for mcu = 606.388625 [10/06/2026 10:58:26] (620.9818189583333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 15:52:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 15:52:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4621205. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:01.4737095. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 15:52:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] -06/13/2026 15:52:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/13/2026 15:52:18 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/13/2026 15:52:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/13/2026 15:52:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1462168 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:53:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0975855 ~ 6.07 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:54:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0811973 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:55:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0852944 ~ 6.07 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:55:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 15:55:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 15:56:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 15:56:21 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 15:57:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0859455 ~ 6.07 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:58:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0799681 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:59:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1008938 ~ 6.07 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 15:59:43 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 15:59:43 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:00:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0782649 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:01:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0898335 ~ 6.07 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:02:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0933834 ~ 6.07 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:03:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1487871 ~ 6.07 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:04:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0883879 ~ 6.07 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:05:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0883536 ~ 6.02 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:06:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0826061 ~ 6.07 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:07:42 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:07:42 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:08:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0814879 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:09:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0777122 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:10:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0929496 ~ 6.01 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:11:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0878576 ~ 6.07 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:12:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0904738 ~ 6.07 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:13:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0810339 ~ 6.06 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:14:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0923978 ~ 6.07 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:15:40 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:15:40 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:16:40 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0910021 ~ 6.07 samples/sec, 7 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:17:41 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1647034 ~ 6 samples/sec, 7 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:18:06 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:18:06 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:19:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0951680 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:20:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0984191 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:21:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0859602 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:22:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0910000 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:23:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1001487 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:24:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0907839 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:25:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0857662 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:26:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0904088 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:27:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0964000 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:28:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0896383 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:29:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0924921 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:30:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0803110 ~ 6.01 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:31:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0916053 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:32:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0981639 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:33:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0881505 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:34:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0864208 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:35:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0826028 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:36:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0786866 ~ 6.08 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:37:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0906499 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:37:17 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:37:17 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:38:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0846564 ~ 6.01 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:39:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0859500 ~ 6.07 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:40:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0878068 ~ 6.07 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:40:38 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:40:38 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:41:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0804081 ~ 6.03 samples/sec, 10 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:42:27 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/13/2026 16:42:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1223406 ~ 6 samples/sec, 10 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:43:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:43:04 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:43:18 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/13/2026 16:44:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0878169 ~ 6.07 samples/sec, 11 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:45:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0886946 ~ 6.07 samples/sec, 11 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:46:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0959031 ~ 6.07 samples/sec, 11 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:46:04 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:46:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:47:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0874548 ~ 6.07 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:48:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0827890 ~ 6.03 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:49:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0936659 ~ 6.07 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:50:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0915353 ~ 6.07 samples/sec, 12 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:50:35 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:50:35 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:51:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0889357 ~ 6.07 samples/sec, 13 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:52:23 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:52:23 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:53:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0894431 ~ 6.07 samples/sec, 14 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:54:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0896392 ~ 6.07 samples/sec, 14 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:55:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0878788 ~ 6.07 samples/sec, 14 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:56:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 16:56:03 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 16:57:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0963030 ~ 6.07 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:58:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0815765 ~ 6.03 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 16:59:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0796962 ~ 6.08 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:00:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0797771 ~ 6.01 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:01:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0999532 ~ 6.06 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:02:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0953635 ~ 6.07 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:03:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0693810 ~ 6.08 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:04:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0995003 ~ 6.07 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:05:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0934012 ~ 6.07 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:06:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0934980 ~ 6.07 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:07:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0826126 ~ 6.07 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:08:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0955638 ~ 6.07 samples/sec, 15 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:08:38 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:08:38 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:09:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0763623 ~ 6.08 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:10:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0814126 ~ 5.96 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:11:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0830229 ~ 6.07 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:12:35 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:12:35 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:13:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0936965 ~ 6.07 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:14:32 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:14:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:14:45 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:14:45 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:15:39 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:15:39 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:16:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0924961 ~ 6.07 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:17:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0899545 ~ 6.07 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:18:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0848736 ~ 6.07 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:19:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0902554 ~ 6.07 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:20:39 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1018374 ~ 6.07 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:21:19 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:21:19 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:22:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0983214 ~ 6.07 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:23:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0911308 ~ 6.01 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:24:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0920135 ~ 6.07 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:25:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0827355 ~ 6.01 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:26:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0886306 ~ 6.07 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:27:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0759153 ~ 6.08 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:28:17 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:28:17 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:29:13 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:29:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:30:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0892588 ~ 6.07 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:30:42 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:30:42 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:31:42 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0866146 ~ 6.07 samples/sec, 24 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:32:05 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:32:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:33:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0767407 ~ 6.08 samples/sec, 25 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:34:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0833184 ~ 6.07 samples/sec, 25 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:35:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0902831 ~ 6.06 samples/sec, 25 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:36:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0747649 ~ 6.08 samples/sec, 25 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:36:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:36:48 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:37:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0818903 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:38:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0876426 ~ 6.07 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:39:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:39:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:40:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0968537 ~ 6.07 samples/sec, 27 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:41:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0776366 ~ 6.08 samples/sec, 27 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:41:50 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:41:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:42:27 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/13/2026 17:42:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1183197 ~ 5.99 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:43:18 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/13/2026 17:43:45 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:43:45 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:44:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1072664 ~ 6.07 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:45:21 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:45:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:46:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1056677 ~ 6.07 samples/sec, 30 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:47:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1039138 ~ 6.07 samples/sec, 30 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:48:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0980314 ~ 6.07 samples/sec, 30 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:48:33 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:48:33 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:49:06 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:49:06 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:50:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0893360 ~ 6.02 samples/sec, 32 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:51:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0787767 ~ 6.08 samples/sec, 32 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:52:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1022521 ~ 6.07 samples/sec, 32 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:52:45 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:52:45 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:53:13 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:53:13 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:54:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0811912 ~ 6.06 samples/sec, 34 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:55:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0741260 ~ 6.08 samples/sec, 34 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:55:18 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:55:19 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:55:54 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:55:54 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:56:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0844723 ~ 6.07 samples/sec, 36 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:57:07 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 17:57:07 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 17:58:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0911993 ~ 6.07 samples/sec, 37 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 17:59:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0866911 ~ 6.01 samples/sec, 37 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:00:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0738665 ~ 6.08 samples/sec, 37 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:01:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0812946 ~ 6.08 samples/sec, 37 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:01:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:01:48 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:01:57 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:01:57 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:02:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0909152 ~ 6.07 samples/sec, 39 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:03:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0886994 ~ 6.07 samples/sec, 39 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:04:06 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:04:06 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:05:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0804133 ~ 6.08 samples/sec, 40 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:05:09 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:05:09 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:06:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0870024 ~ 6.02 samples/sec, 41 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:07:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0955612 ~ 6.07 samples/sec, 41 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:08:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0806805 ~ 6.08 samples/sec, 41 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:09:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0925333 ~ 6.07 samples/sec, 41 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:09:19 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:09:19 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:10:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0859713 ~ 6.07 samples/sec, 42 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:11:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0737073 ~ 6.08 samples/sec, 42 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:12:09 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:12:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:13:10 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0895452 ~ 6.02 samples/sec, 43 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:14:10 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0893041 ~ 6.01 samples/sec, 43 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:14:23 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:14:24 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:15:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0780340 ~ 6.01 samples/sec, 44 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:16:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0979739 ~ 6.07 samples/sec, 44 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:17:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0896478 ~ 6.02 samples/sec, 44 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:18:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0848249 ~ 6.07 samples/sec, 44 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:19:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0831488 ~ 6.01 samples/sec, 44 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:20:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0730899 ~ 6.08 samples/sec, 44 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:21:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0939955 ~ 6.07 samples/sec, 44 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:22:15 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:22:15 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:23:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0833629 ~ 6.07 samples/sec, 45 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:23:24 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:23:24 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:24:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0839986 ~ 6.07 samples/sec, 46 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:25:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0928088 ~ 6.07 samples/sec, 46 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:26:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0980830 ~ 6.02 samples/sec, 46 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:27:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0759748 ~ 6.08 samples/sec, 46 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:28:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0833852 ~ 6.07 samples/sec, 46 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:29:01 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:29:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:29:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:29:03 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:30:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0825684 ~ 6.06 samples/sec, 48 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:31:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0837827 ~ 6.07 samples/sec, 48 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:31:14 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:31:14 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:31:47 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:31:47 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:32:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0672858 ~ 6.08 samples/sec, 50 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:33:24 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:33:24 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:34:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0800347 ~ 6.08 samples/sec, 51 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:35:24 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0826117 ~ 6.06 samples/sec, 51 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:35:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:35:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:36:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0868285 ~ 6.07 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:37:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0717142 ~ 6.08 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:38:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0779532 ~ 6.08 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:39:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0825672 ~ 6.07 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:40:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0756648 ~ 6.08 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:41:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0877370 ~ 6.07 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:42:28 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] -06/13/2026 18:42:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0414580 ~ 6.01 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:43:18 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/13/2026 18:43:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0905078 ~ 6.07 samples/sec, 52 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:43:51 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:43:51 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:44:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0833622 ~ 6.07 samples/sec, 53 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:45:17 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:45:17 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:46:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0878161 ~ 6.07 samples/sec, 54 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:47:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0909171 ~ 6.07 samples/sec, 54 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:48:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0787154 ~ 6.08 samples/sec, 54 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:49:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0809235 ~ 6.08 samples/sec, 54 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:50:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0819418 ~ 6.08 samples/sec, 54 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:51:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0830919 ~ 6.07 samples/sec, 54 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:52:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0946608 ~ 6.07 samples/sec, 54 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:53:01 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:53:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:53:24 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:53:24 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:54:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0908367 ~ 6.02 samples/sec, 56 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:54:43 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 18:54:43 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 18:55:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0856119 ~ 6.07 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:56:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0812070 ~ 6.08 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:57:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0798140 ~ 6.08 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:58:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0757813 ~ 6.03 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 18:59:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0831777 ~ 6.07 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:00:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.1015502 ~ 6.07 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:01:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0932886 ~ 6.07 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:02:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0872550 ~ 6.07 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:03:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0860088 ~ 6.07 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:04:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0691199 ~ 6.08 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:05:44 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0878521 ~ 6.07 samples/sec, 57 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:05:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 19:05:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 19:06:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0909075 ~ 6.02 samples/sec, 58 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:07:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 19:07:20 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 19:08:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0768743 ~ 6.08 samples/sec, 59 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:09:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0772529 ~ 6.08 samples/sec, 59 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:10:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0827076 ~ 6.07 samples/sec, 59 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:11:21 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0891251 ~ 6.07 samples/sec, 59 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:11:22 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 19:11:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 19:12:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0908734 ~ 6.07 samples/sec, 60 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:13:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0828114 ~ 6.07 samples/sec, 60 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:14:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0722153 ~ 6.08 samples/sec, 60 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:15:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0837581 ~ 6.06 samples/sec, 60 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:16:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0926247 ~ 6.07 samples/sec, 60 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:17:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0871073 ~ 6.07 samples/sec, 60 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:18:23 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0871881 ~ 6.01 samples/sec, 60 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:19:11 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 19:19:11 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 19:19:14 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/13/2026 19:19:14 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/13/2026 19:20:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0877558 ~ 6.07 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:21:14 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0901688 ~ 6.07 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:22:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0852383 ~ 6.07 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:23:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0824584 ~ 6.07 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:24:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:24:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:01.0168637. SinceCollect=03:31:57.8695237. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=12560, gen1=1192, gen2=151, LatencyMode=Interactive, FreeMemory=6532366336, Live=276249152, HeapSizeBytes=275706352, FragmentedBytes=124160, TotalCommittedBytes=275955712, PinnedObjectsCount=24, MemoryLoadBytes=2028145213, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631958. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0653636. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0762427. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:24:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 74573267002 (74573267002 @ 0) for mcu = 606.851538 [10/06/2026 10:58:26] (621.4438916833333 sec) to 1600651891813 (from now=1600531891813, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 74573267002 (74573267002 @ 0) for mcu = 606.851538 [10/06/2026 10:58:26] (621.4438916833333 sec) to 1600651891813 (from external timestamp, flags=None, requested=1600651891813 (1600651891813 @ 0) for mcu = 13324.334761 [10/06/2026 14:30:24] (13338.765765108334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 74573267002 (74573267002 @ 0) for mcu = 606.851538 [10/06/2026 10:58:26] (621.4438916833333 sec) to 1600651891813 (from external timestamp, flags=None, requested=1600651891813 (1600651891813 @ 0) for mcu = 13324.334761 [10/06/2026 14:30:24] (13338.765765108334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:24:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:24:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2652401. Loops = 34. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.4108752. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:24:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] -06/13/2026 19:24:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:24:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0241705 ~ 5.95 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:24:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] -06/13/2026 19:24:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:24:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.2472852. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:24:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1601530720679 (1601530720679 @ 0) for mcu = 13331.658390 [10/06/2026 14:30:31] (13346.089338991667 sec) to 1602112308852 (from now=1601992308852, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:24:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1601530720679 (1601530720679 @ 0) for mcu = 13331.658390 [10/06/2026 14:30:31] (13346.089338991667 sec) to 1602112308852 (from external timestamp, flags=None, requested=1602112308852 (1602112308852 @ 0) for mcu = 13336.505016 [10/06/2026 14:30:36] (13350.9359071 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:24:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1601530720679 (1601530720679 @ 0) for mcu = 13331.658390 [10/06/2026 14:30:31] (13346.089338991667 sec) to 1602112308852 (from external timestamp, flags=None, requested=1602112308852 (1602112308852 @ 0) for mcu = 13336.505016 [10/06/2026 14:30:36] (13350.9359071 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:24:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:24:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4616777. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:13.7187760. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:24:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] -06/13/2026 19:24:27 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/13/2026 19:24:27 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/13/2026 19:25:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0633401 ~ 6.06 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:25:26 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Starting job: Job has been started! [UIToastProvider.cs@98] -06/13/2026 19:25:27 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] -06/13/2026 19:25:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.7247089. SinceCollect=00:01:21.3695356. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=12649, gen1=1202, gen2=155, LatencyMode=Interactive, FreeMemory=6072516608, Live=266005064, HeapSizeBytes=265376088, FragmentedBytes=106192, TotalCommittedBytes=265650176, PinnedObjectsCount=24, MemoryLoadBytes=2450675466, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Printing.PrintingService] [0] Starting soft heater, with analysis filename '/surface/analysis_2025-10-21_00-57-47.s4a-sha' and HalogenMaxPercent=100 [PrintingService.cs@1732] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loading profile PrinterPath { IsSystemPath = False, PathUnsafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha, PathSafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha } [SoftAnalysisSurfaceHeater.cs@668] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 0, start=0, count=232, Z=0.001 [PrintingService.cs@1518] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loaded prepared data from /home/SLS4All/.PrivateData/SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater/analysis_2025-10-21_00-57-47.0DF7023A24F0264E1569792DD4916C75BEE131F0.prepared.json [SoftAnalysisSurfaceHeater.cs@413] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Starting heater [SoftAnalysisSurfaceHeater.cs@733] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin heating (soft heater running = True) [PrintingService.cs@2490] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=40.034088134765625, Elapsed=00:00:00 [ControlledHeating.cs@486] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 40.034088134765625 after 00:00:00 [ControlledHeating.cs@493] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 0, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.236180843091422E-05, Elapsed = 00:00:00.0049373, TimeTotal = 06:07:59.1624043, Remaining = 06:07:59.1574670, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:00.0049373, HeatingEstimate = 01:10:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: Progress;StartedAtUtc;Elapsed;TimeTotal;Remaining;Incomplete;SoftCount;LayerPrintDone;WeightsDone;WeightDone;WeightTotal;WeightTotalEstimate;LayerRecoatElapsed;LayerRecoatDelays;LayerRecoatPrintLayersElapsed;LayerRecoatNoDelayAverage;StreamingElapsed;ObjectLayerOverheadAverageDuration;TimeLayers;CoolingElapsed;CoolingEstimate;HeatingElapsed;HeatingEstimate;HeatingEstimate2;HeatingEstimate3;CoolingFrom;BedPreparationElapsed;BedPreparationTotal;PrintCapElapsed;PrintCapTotal;JobElapsed;JobTotal [PrintingService.cs@1916] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.236180843091422E-05;StartedAtUtc;00:00:00.0049373;06:07:59.1624043;06:07:59.1574670;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:00.0049373;01:10:00;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Heat-up surface target 20 reached, setting surface run to 168 and after 00:45:00 to 173 [ControlledHeating.cs@566] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1138667. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=40.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=26.428571428571427,powderChamber1=26.428571428571427,powderChamber2=26.428571428571427,powderChamber3=26.428571428571427,powderChamber4=26.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=26.428571428571427,printChamber1=26.428571428571427,printChamber2=26.428571428571427,printChamber3=26.428571428571427,printChamber4=26.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 152, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631486. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1802309. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1964721. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:25:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1602167757579 (1602167757579 @ 0) for mcu = 13336.967086 [10/06/2026 14:30:36] (13351.397979825 sec) to 1610430655017 (from now=1610310655017, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1602167757579 (1602167757579 @ 0) for mcu = 13336.967086 [10/06/2026 14:30:36] (13351.397979825 sec) to 1610430655017 (from external timestamp, flags=None, requested=1610430655017 (1610430655017 @ 0) for mcu = 13405.825461 [10/06/2026 14:31:45] (13420.255458475 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1602167757579 (1602167757579 @ 0) for mcu = 13336.967086 [10/06/2026 14:30:36] (13351.397979825 sec) to 1610430655017 (from external timestamp, flags=None, requested=1610430655017 (1610430655017 @ 0) for mcu = 13405.825461 [10/06/2026 14:31:45] (13420.255458475 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 40.427067279815674. Used = 40.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:25:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:25:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=27.428571428571427,powderChamber1=27.428571428571427,powderChamber2=27.428571428571427,powderChamber3=27.428571428571427,powderChamber4=27.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=41.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:25:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 7.5314893, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.034149108543476504, Elapsed = 00:00:07.5398383, TimeTotal = 06:07:59.1658160, Remaining = 06:07:51.6259777, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:07.5398383, HeatingEstimate = 01:09:52.4685107, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:25:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.034149108543476504;StartedAtUtc;00:00:07.5398383;06:07:59.1658160;06:07:51.6259777;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:07.5398383;01:09:52.4685107;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/13/2026 19:25:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=27.428571428571427,printChamber1=27.428571428571427,printChamber2=27.428571428571427,printChamber3=27.428571428571427,printChamber4=27.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 41.427067279815674. Used = 41.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:25:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9669525. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3096884. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:25:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:25:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:25:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=42.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:25:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=28.428571428571427,powderChamber1=28.428571428571427,powderChamber2=28.428571428571427,powderChamber3=28.428571428571427,powderChamber4=28.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 15.0367465, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.06814160292113261, Elapsed = 00:00:15.0450975, TimeTotal = 06:07:59.1658180, Remaining = 06:07:44.1207205, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:15.0450975, HeatingEstimate = 01:09:44.9632535, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:25:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.06814160292113261;StartedAtUtc;00:00:15.0450975;06:07:59.1658180;06:07:44.1207205;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:15.0450975;01:09:44.9632535;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/13/2026 19:25:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=28.428571428571427,printChamber1=28.428571428571427,printChamber2=28.428571428571427,printChamber3=28.428571428571427,printChamber4=28.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 42.427067279815674. Used = 42.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:25:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 28.428572 with temperature 25.25 [HeaterCheck.cs@67] -06/13/2026 19:25:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=29.428571428571427,powderChamber1=29.428571428571427,powderChamber2=29.428571428571427,powderChamber3=29.428571428571427,powderChamber4=29.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=43.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:25:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 22.5373466, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.10211295297768129, Elapsed = 00:00:22.5456882, TimeTotal = 06:07:59.1658086, Remaining = 06:07:36.6201204, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:22.5456882, HeatingEstimate = 01:09:37.4626534, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:25:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.10211295297768129;StartedAtUtc;00:00:22.5456882;06:07:59.1658086;06:07:36.6201204;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:22.5456882;01:09:37.4626534;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/13/2026 19:25:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=29.428571428571427,printChamber1=29.428571428571427,printChamber2=29.428571428571427,printChamber3=29.428571428571427,printChamber4=29.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 43.427067279815674. Used = 43.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:25:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 29.428572 with temperature 24.75 [HeaterCheck.cs@67] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=44.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=30.428571428571427,powderChamber1=30.428571428571427,powderChamber2=30.428571428571427,powderChamber3=30.428571428571427,powderChamber4=30.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 44.427067279815674. Used = 44.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 30.0408955, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.13609779342538222, Elapsed = 00:00:30.0492575, TimeTotal = 06:07:59.1658290, Remaining = 06:07:29.1165715, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:30.0492575, HeatingEstimate = 01:09:29.9591045, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.13609779342538222;StartedAtUtc;00:00:30.0492575;06:07:59.1658290;06:07:29.1165715;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:30.0492575;01:09:29.9591045;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=30.428571428571427,printChamber1=30.428571428571427,printChamber2=30.428571428571427,printChamber3=30.428571428571427,printChamber4=30.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=44.09191131591797, Elapsed=00:00:30.2175309 [ControlledHeating.cs@486] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 44.09191131591797 after 00:00:30.2175871 [ControlledHeating.cs@493] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3308627. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633891. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3962011. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.4099149. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:25:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1611642176245 (1611642176245 @ 0) for mcu = 13415.921581 [10/06/2026 14:31:55] (13430.351468708333 sec) to 1614056064235 (from now=1613936064235, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1611642176245 (1611642176245 @ 0) for mcu = 13415.921581 [10/06/2026 14:31:55] (13430.351468708333 sec) to 1614056064235 (from external timestamp, flags=None, requested=1614056064235 (1614056064235 @ 0) for mcu = 13436.037569 [10/06/2026 14:32:15] (13450.467201958334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1611642176245 (1611642176245 @ 0) for mcu = 13415.921581 [10/06/2026 14:31:55] (13430.351468708333 sec) to 1614056064235 (from external timestamp, flags=None, requested=1614056064235 (1614056064235 @ 0) for mcu = 13436.037569 [10/06/2026 14:32:15] (13450.467201958334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:25:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:25:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 30.428572 with temperature 28.25 [HeaterCheck.cs@67] -06/13/2026 19:25:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 30.428572 with temperature 30.75 [HeaterCheck.cs@67] -06/13/2026 19:26:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 30.428572 with temperature 30.5 [HeaterCheck.cs@67] -06/13/2026 19:26:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.428572 with temperature 26.25 [HeaterCheck.cs@67] -06/13/2026 19:26:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 30.428572 with temperature 27.5 [HeaterCheck.cs@67] -06/13/2026 19:26:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 30.428572 with temperature 27.5 [HeaterCheck.cs@67] -06/13/2026 19:26:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.428572 with temperature 25.5 [HeaterCheck.cs@67] -06/13/2026 19:26:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262527, estimate=49.85581368071552 for layer 0, Z=0.001 [PrintingService.cs@1524] -06/13/2026 19:26:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 10 [PrintingService.cs@1569] -06/13/2026 19:26:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 1, start=0, count=232, Z=0.101 [PrintingService.cs@1518] -06/13/2026 19:26:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 255, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:26:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=45.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=31.428571428571427,powderChamber1=31.428571428571427,powderChamber2=31.428571428571427,powderChamber3=31.428571428571427,powderChamber4=31.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:26:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 45.427067279815674. Used = 45.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 37.5408436, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.17027246591296563, Elapsed = 00:00:37.5491991, TimeTotal = 06:07:32.4198664, Remaining = 06:06:54.8706673, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.3712627, WeightTotalEstimate = 01:01:03.3712627, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:09.9115109, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:37.5491991, HeatingEstimate = 01:09:22.4591564, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.4729539, WeightEstimate = 01:01:03.3712627 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.17027246591296563;StartedAtUtc;00:00:37.5491991;06:07:32.4198664;06:06:54.8706673;False;232;0;0;00:00:00;01:01:03.3712627;01:01:03.3712627;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:09.9115109;00:00:00;02:00:00;00:00:37.5491991;01:09:22.4591564;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.4729539 [PrintingService.cs@1918] -06/13/2026 19:26:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=31.428571428571427,printChamber1=31.428571428571427,printChamber2=31.428571428571427,printChamber3=31.428571428571427,printChamber4=31.428571428571427 [ControlledHeating.cs@169] -06/13/2026 19:26:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.428572 with temperature 28 [HeaterCheck.cs@67] -06/13/2026 19:26:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.428572 with temperature 28 [HeaterCheck.cs@67] -06/13/2026 19:26:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9963490. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.5171560. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:26:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:26:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:26:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.428572 with temperature 27.5 [HeaterCheck.cs@67] -06/13/2026 19:26:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.428572 with temperature 28 [HeaterCheck.cs@67] -06/13/2026 19:26:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 31.428572 with temperature 27.75 [HeaterCheck.cs@67] -06/13/2026 19:26:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.428572 with temperature 26.75 [HeaterCheck.cs@67] -06/13/2026 19:26:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.428572 with temperature 26.5 [HeaterCheck.cs@67] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=32.42857142857143,powderChamber1=32.42857142857143,powderChamber2=32.42857142857143,powderChamber3=32.42857142857143,powderChamber4=32.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=46.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 45.0410869, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.2042833748103873, Elapsed = 00:00:45.0494275, TimeTotal = 06:07:32.4198515, Remaining = 06:06:47.3704240, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.3712627, WeightTotalEstimate = 01:01:03.3712627, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:09.9115109, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:45.0494275, HeatingEstimate = 01:09:14.9589131, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.4729539, WeightEstimate = 01:01:03.3712627 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.2042833748103873;StartedAtUtc;00:00:45.0494275;06:07:32.4198515;06:06:47.3704240;False;232;0;0;00:00:00;01:01:03.3712627;01:01:03.3712627;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:09.9115109;00:00:00;02:00:00;00:00:45.0494275;01:09:14.9589131;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.4729539 [PrintingService.cs@1918] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=32.42857142857143,printChamber1=32.42857142857143,printChamber2=32.42857142857143,printChamber3=32.42857142857143,printChamber4=32.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 32.42857 with temperature 25 [HeaterCheck.cs@88] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 46.427067279815674. Used = 46.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.42857 with temperature 29.25 [HeaterCheck.cs@67] -06/13/2026 19:26:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 32.42857 with temperature 33 [HeaterCheck.cs@67] -06/13/2026 19:26:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 355 samples in 00:01:00.0708533 ~ 5.91 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:26:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.42857 with temperature 27.75 [HeaterCheck.cs@67] -06/13/2026 19:26:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.42857 with temperature 27.5 [HeaterCheck.cs@67] -06/13/2026 19:26:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.42857 with temperature 28 [HeaterCheck.cs@67] -06/13/2026 19:26:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.42857 with temperature 27.75 [HeaterCheck.cs@67] -06/13/2026 19:26:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=47.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=33.42857142857143,powderChamber1=33.42857142857143,powderChamber2=33.42857142857143,powderChamber3=33.42857142857143,powderChamber4=33.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 47.427067279815674. Used = 47.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 52.5479588, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.23832473389783704, Elapsed = 00:00:52.5563711, TimeTotal = 06:07:32.4199232, Remaining = 06:06:39.8635521, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.3712627, WeightTotalEstimate = 01:01:03.3712627, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:09.9115109, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:52.5563711, HeatingEstimate = 01:09:07.4520412, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.4729539, WeightEstimate = 01:01:03.3712627 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.23832473389783704;StartedAtUtc;00:00:52.5563711;06:07:32.4199232;06:06:39.8635521;False;232;0;0;00:00:00;01:01:03.3712627;01:01:03.3712627;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:09.9115109;00:00:00;02:00:00;00:00:52.5563711;01:09:07.4520412;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.4729539 [PrintingService.cs@1918] -06/13/2026 19:26:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=33.42857142857143,printChamber1=33.42857142857143,printChamber2=33.42857142857143,printChamber3=33.42857142857143,printChamber4=33.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 33.42857 with temperature 31 [HeaterCheck.cs@67] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=34.42857142857143,powderChamber1=34.42857142857143,powderChamber2=34.42857142857143,powderChamber3=34.42857142857143,powderChamber4=34.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=48.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 48.427067279815674. Used = 48.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 60.053219, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.2723581335101255, Elapsed = 00:01:00.0615591, TimeTotal = 06:07:32.4198510, Remaining = 06:06:32.3582919, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.3712627, WeightTotalEstimate = 01:01:03.3712627, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:09.9115109, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:00.0615591, HeatingEstimate = 01:08:59.9467810, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.4729539, WeightEstimate = 01:01:03.3712627 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.2723581335101255;StartedAtUtc;00:01:00.0615591;06:07:32.4198510;06:06:32.3582919;False;232;0;0;00:00:00;01:01:03.3712627;01:01:03.3712627;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:09.9115109;00:00:00;02:00:00;00:01:00.0615591;01:08:59.9467810;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.4729539 [PrintingService.cs@1918] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=34.42857142857143,printChamber1=34.42857142857143,printChamber2=34.42857142857143,printChamber3=34.42857142857143,printChamber4=34.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=47.32136917114258, Elapsed=00:00:30.1995590 [ControlledHeating.cs@486] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 47.32136917114258 after 00:00:30.1996301 [ControlledHeating.cs@493] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3265880. SinceCollect=00:01:00.8635059. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (25 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=12738, gen1=1208, gen2=157, LatencyMode=Interactive, FreeMemory=5866242048, Live=465394104, HeapSizeBytes=478147960, FragmentedBytes=13045648, TotalCommittedBytes=485752832, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634327. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0627584. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:26:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:26:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0777025. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:26:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:26:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:26:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1615267585463 (1615267585463 @ 0) for mcu = 13446.133716 [10/06/2026 14:32:26] (13460.563212191666 sec) to 1617719797136 (from now=1617599797136, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:26:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1615267585463 (1615267585463 @ 0) for mcu = 13446.133716 [10/06/2026 14:32:26] (13460.563212191666 sec) to 1617719797136 (from external timestamp, flags=None, requested=1617719797136 (1617719797136 @ 0) for mcu = 13466.569079 [10/06/2026 14:32:46] (13480.998309466666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:26:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1615267585463 (1615267585463 @ 0) for mcu = 13446.133716 [10/06/2026 14:32:26] (13460.563212191666 sec) to 1617719797136 (from external timestamp, flags=None, requested=1617719797136 (1617719797136 @ 0) for mcu = 13466.569079 [10/06/2026 14:32:46] (13480.998309466666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:26:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:26:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=35.42857142857143,powderChamber1=35.42857142857143,powderChamber2=35.42857142857143,powderChamber3=35.42857142857143,powderChamber4=35.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=49.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 49.427067279815674. Used = 49.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 67.5563544, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.30638369286172434, Elapsed = 00:01:07.5650193, TimeTotal = 06:07:32.4201758, Remaining = 06:06:24.8551565, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.3712627, WeightTotalEstimate = 01:01:03.3712627, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:09.9115109, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:07.5650193, HeatingEstimate = 01:08:52.4436456, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.4729539, WeightEstimate = 01:01:03.3712627 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.30638369286172434;StartedAtUtc;00:01:07.5650193;06:07:32.4201758;06:06:24.8551565;False;232;0;0;00:00:00;01:01:03.3712627;01:01:03.3712627;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:09.9115109;00:00:00;02:00:00;00:01:07.5650193;01:08:52.4436456;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.4729539 [PrintingService.cs@1918] -06/13/2026 19:26:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=35.42857142857143,printChamber1=35.42857142857143,printChamber2=35.42857142857143,printChamber3=35.42857142857143,printChamber4=35.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 35.42857 with temperature 32 [HeaterCheck.cs@67] -06/13/2026 19:26:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 35.42857 with temperature 32 [HeaterCheck.cs@67] -06/13/2026 19:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9874133. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1859800. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:26:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:26:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:26:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=350801, estimate=49.96207804710074 for layer 1, Z=0.101 [PrintingService.cs@1524] -06/13/2026 19:26:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 10 [PrintingService.cs@1569] -06/13/2026 19:26:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 2, start=0, count=232, Z=0.201 [PrintingService.cs@1518] -06/13/2026 19:26:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 278, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:26:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=50.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=36.42857142857143,powderChamber1=36.42857142857143,powderChamber2=36.42857142857143,powderChamber3=36.42857142857143,powderChamber4=36.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 50.427067279815674. Used = 50.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 75.0561087, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.3400865932813786, Elapsed = 00:01:15.0644509, TimeTotal = 06:07:52.1582041, Remaining = 06:06:37.0937532, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.1096137, WeightTotalEstimate = 01:01:23.1096137, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.6498619, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:15.0644509, HeatingEstimate = 01:08:44.9438913, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.2113049, WeightEstimate = 01:01:23.1096137 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3400865932813786;StartedAtUtc;00:01:15.0644509;06:07:52.1582041;06:06:37.0937532;False;232;0;0;00:00:00;01:01:23.1096137;01:01:23.1096137;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.6498619;00:00:00;02:00:00;00:01:15.0644509;01:08:44.9438913;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.2113049 [PrintingService.cs@1918] -06/13/2026 19:26:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=36.42857142857143,printChamber1=36.42857142857143,printChamber2=36.42857142857143,printChamber3=36.42857142857143,printChamber4=36.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 36.42857 with temperature 33 [HeaterCheck.cs@67] -06/13/2026 19:26:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 36.42857 with temperature 32 [HeaterCheck.cs@67] -06/13/2026 19:26:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 36.42857 with temperature 34 [HeaterCheck.cs@67] -06/13/2026 19:26:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=51.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=26 that are outside of set tolerance 10 for current step target 36.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:26:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 51.427067279815674. Used = 51.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 82.5588542, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.37407874989911793, Elapsed = 00:01:22.5672537, TimeTotal = 06:07:52.1582614, Remaining = 06:06:29.5910077, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.1096137, WeightTotalEstimate = 01:01:23.1096137, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.6498619, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:22.5672537, HeatingEstimate = 01:08:37.4411458, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.2113049, WeightEstimate = 01:01:23.1096137 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.37407874989911793;StartedAtUtc;00:01:22.5672537;06:07:52.1582614;06:06:29.5910077;False;232;0;0;00:00:00;01:01:23.1096137;01:01:23.1096137;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.6498619;00:00:00;02:00:00;00:01:22.5672537;01:08:37.4411458;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.2113049 [PrintingService.cs@1918] -06/13/2026 19:26:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=37.42857142857143,printChamber1=37.42857142857143,printChamber2=37.42857142857143,printChamber3=37.42857142857143,printChamber4=37.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=37.42857142857143,powderChamber1=37.42857142857143,powderChamber2=37.42857142857143,powderChamber3=37.42857142857143,powderChamber4=37.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=52.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:26:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 52.427067279815674. Used = 52.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:26:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 90.0559625, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.40804533353443206, Elapsed = 00:01:30.0644120, TimeTotal = 06:07:52.1583114, Remaining = 06:06:22.0938994, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.1096137, WeightTotalEstimate = 01:01:23.1096137, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.6498619, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:30.0644120, HeatingEstimate = 01:08:29.9440375, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.2113049, WeightEstimate = 01:01:23.1096137 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:26:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.40804533353443206;StartedAtUtc;00:01:30.0644120;06:07:52.1583114;06:06:22.0938994;False;232;0;0;00:00:00;01:01:23.1096137;01:01:23.1096137;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.6498619;00:00:00;02:00:00;00:01:30.0644120;01:08:29.9440375;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.2113049 [PrintingService.cs@1918] -06/13/2026 19:26:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=38.42857142857143,printChamber1=38.42857142857143,printChamber2=38.42857142857143,printChamber3=38.42857142857143,printChamber4=38.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=50.93775177001953, Elapsed=00:00:30.5375715 [ControlledHeating.cs@486] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 50.93775177001953 after 00:00:30.5389168 [ControlledHeating.cs@493] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2076532. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633124. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2706085. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:26:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=27 that are outside of set tolerance 10 for current step target 37.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2833799. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:26:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1618931318364 (1618931318364 @ 0) for mcu = 13476.665175 [10/06/2026 14:32:56] (13491.0943197 sec) to 1621344399808 (from now=1621224399808, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1618931318364 (1618931318364 @ 0) for mcu = 13476.665175 [10/06/2026 14:32:56] (13491.0943197 sec) to 1621344399808 (from external timestamp, flags=None, requested=1621344399808 (1621344399808 @ 0) for mcu = 13496.774437 [10/06/2026 14:33:16] (13511.203331733333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1618931318364 (1618931318364 @ 0) for mcu = 13476.665175 [10/06/2026 14:32:56] (13491.0943197 sec) to 1621344399808 (from external timestamp, flags=None, requested=1621344399808 (1621344399808 @ 0) for mcu = 13496.774437 [10/06/2026 14:33:16] (13511.203331733333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=38.42857142857143,powderChamber1=38.42857142857143,powderChamber2=38.42857142857143,powderChamber3=38.42857142857143,powderChamber4=38.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=53.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 53.427067279815674. Used = 53.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 97.5673128, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.4420757353885782, Elapsed = 00:01:37.5756557, TimeTotal = 06:07:52.1582048, Remaining = 06:06:14.5825491, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.1096137, WeightTotalEstimate = 01:01:23.1096137, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.6498619, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:37.5756557, HeatingEstimate = 01:08:22.4326872, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.2113049, WeightEstimate = 01:01:23.1096137 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4420757353885782;StartedAtUtc;00:01:37.5756557;06:07:52.1582048;06:06:14.5825491;False;232;0;0;00:00:00;01:01:23.1096137;01:01:23.1096137;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.6498619;00:00:00;02:00:00;00:01:37.5756557;01:08:22.4326872;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.2113049 [PrintingService.cs@1918] -06/13/2026 19:27:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=39.42857142857143,printChamber1=39.42857142857143,printChamber2=39.42857142857143,printChamber3=39.42857142857143,printChamber4=39.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:08 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=28 that are outside of set tolerance 10 for current step target 38.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:27:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9934144. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3899324. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:27:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:27:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:27:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=54.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 54.427067279815674. Used = 54.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 105.0697988, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.4760673315332176, Elapsed = 00:01:45.0783355, TimeTotal = 06:07:52.1583986, Remaining = 06:06:07.0800631, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.1096137, WeightTotalEstimate = 01:01:23.1096137, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.6498619, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:45.0783355, HeatingEstimate = 01:08:14.9302012, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.2113049, WeightEstimate = 01:01:23.1096137 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4760673315332176;StartedAtUtc;00:01:45.0783355;06:07:52.1583986;06:06:07.0800631;False;232;0;0;00:00:00;01:01:23.1096137;01:01:23.1096137;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.6498619;00:00:00;02:00:00;00:01:45.0783355;01:08:14.9302012;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.2113049 [PrintingService.cs@1918] -06/13/2026 19:27:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=40.42857142857143,printChamber1=40.42857142857143,printChamber2=40.42857142857143,printChamber3=40.42857142857143,printChamber4=40.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0600468 ~ 5.99 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:27:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 38.42857 with temperature 34.5 [HeaterCheck.cs@67] -06/13/2026 19:27:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 38.42857 with temperature 38.25 [HeaterCheck.cs@67] -06/13/2026 19:27:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262491, estimate=49.95793063159691 for layer 2, Z=0.201 [PrintingService.cs@1524] -06/13/2026 19:27:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 10 [PrintingService.cs@1569] -06/13/2026 19:27:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 3, start=0, count=232, Z=0.301 [PrintingService.cs@1518] -06/13/2026 19:27:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 264, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:27:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/13/2026 19:27:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/13/2026 19:27:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/13/2026 19:27:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/13/2026 19:27:19 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/13/2026 19:27:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/13/2026 19:27:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=55.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 55.427067279815674. Used = 55.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 112.5719599, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.5100417003006577, Elapsed = 00:01:52.5803129, TimeTotal = 06:07:52.7663706, Remaining = 06:06:00.1860577, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.7177694, WeightTotalEstimate = 01:01:23.7177694, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.2580176, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:52.5803129, HeatingEstimate = 01:08:07.4280401, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.8194606, WeightEstimate = 01:01:23.7177694 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5100417003006577;StartedAtUtc;00:01:52.5803129;06:07:52.7663706;06:06:00.1860577;False;232;0;0;00:00:00;01:01:23.7177694;01:01:23.7177694;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.2580176;00:00:00;02:00:00;00:01:52.5803129;01:08:07.4280401;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.8194606 [PrintingService.cs@1918] -06/13/2026 19:27:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=41.42857142857143,printChamber1=41.42857142857143,printChamber2=41.42857142857143,printChamber3=41.42857142857143,printChamber4=41.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=39.42857142857143,powderChamber1=39.42857142857143,powderChamber2=39.42857142857143,powderChamber3=39.42857142857143,powderChamber4=39.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=56.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 56.427067279815674. Used = 56.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 120.0828614, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.5440697861503467, Elapsed = 00:02:00.0912530, TimeTotal = 06:07:52.7664092, Remaining = 06:05:52.6751562, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.7177694, WeightTotalEstimate = 01:01:23.7177694, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.2580176, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:00.0912530, HeatingEstimate = 01:07:59.9171386, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.8194606, WeightEstimate = 01:01:23.7177694 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5440697861503467;StartedAtUtc;00:02:00.0912530;06:07:52.7664092;06:05:52.6751562;False;232;0;0;00:00:00;01:01:23.7177694;01:01:23.7177694;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.2580176;00:00:00;02:00:00;00:02:00.0912530;01:07:59.9171386;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.8194606 [PrintingService.cs@1918] -06/13/2026 19:27:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=42.42857142857143,printChamber1=42.42857142857143,printChamber2=42.42857142857143,printChamber3=42.42857142857143,printChamber4=42.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=40.42857142857143,powderChamber1=40.42857142857143,powderChamber2=40.42857142857143,powderChamber3=40.42857142857143,powderChamber4=40.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=55.46344757080078, Elapsed=00:00:30.1999908 [ControlledHeating.cs@486] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 55.46344757080078 after 00:00:30.2000778 [ControlledHeating.cs@493] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3251585. SinceCollect=00:01:00.7319952. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=12839, gen1=1215, gen2=158, LatencyMode=Interactive, FreeMemory=5864341504, Live=465626728, HeapSizeBytes=479329408, FragmentedBytes=14075872, TotalCommittedBytes=487325696, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631752. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0668063. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0778282. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:27:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1622555921036 (1622555921036 @ 0) for mcu = 13506.870561 [10/06/2026 14:33:26] (13521.299341966667 sec) to 1625007555651 (from now=1624887555651, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1622555921036 (1622555921036 @ 0) for mcu = 13506.870561 [10/06/2026 14:33:26] (13521.299341966667 sec) to 1625007555651 (from external timestamp, flags=None, requested=1625007555651 (1625007555651 @ 0) for mcu = 13527.301097 [10/06/2026 14:33:47] (13541.729630425 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1622555921036 (1622555921036 @ 0) for mcu = 13506.870561 [10/06/2026 14:33:26] (13521.299341966667 sec) to 1625007555651 (from external timestamp, flags=None, requested=1625007555651 (1625007555651 @ 0) for mcu = 13527.301097 [10/06/2026 14:33:47] (13541.729630425 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:27:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=57.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 57.427067279815674. Used = 57.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 127.5844347, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.5780607068967493, Elapsed = 00:02:07.5939963, TimeTotal = 06:07:52.7675792, Remaining = 06:05:45.1735829, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.7177694, WeightTotalEstimate = 01:01:23.7177694, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.2580176, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:07.5939963, HeatingEstimate = 01:07:52.4155653, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.8194606, WeightEstimate = 01:01:23.7177694 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5780607068967493;StartedAtUtc;00:02:07.5939963;06:07:52.7675792;06:05:45.1735829;False;232;0;0;00:00:00;01:01:23.7177694;01:01:23.7177694;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.2580176;00:00:00;02:00:00;00:02:07.5939963;01:07:52.4155653;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.8194606 [PrintingService.cs@1918] -06/13/2026 19:27:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=43.42857142857143,printChamber1=43.42857142857143,printChamber2=43.42857142857143,printChamber3=43.42857142857143,printChamber4=43.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=26.25 that are outside of set tolerance 10 for current step target 40.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:27:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9907761. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1833520. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:27:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:27:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:27:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 43.42857 with temperature 43 [HeaterCheck.cs@67] -06/13/2026 19:27:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=58.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 58.427067279815674. Used = 58.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 135.0932483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.6120737072249316, Elapsed = 00:02:15.1015994, TimeTotal = 06:07:52.7663687, Remaining = 06:05:37.6647693, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.7177694, WeightTotalEstimate = 01:01:23.7177694, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.2580176, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:15.1015994, HeatingEstimate = 01:07:44.9067517, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.8194606, WeightEstimate = 01:01:23.7177694 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6120737072249316;StartedAtUtc;00:02:15.1015994;06:07:52.7663687;06:05:37.6647693;False;232;0;0;00:00:00;01:01:23.7177694;01:01:23.7177694;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.2580176;00:00:00;02:00:00;00:02:15.1015994;01:07:44.9067517;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.8194606 [PrintingService.cs@1918] -06/13/2026 19:27:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=44.42857142857143,printChamber1=44.42857142857143,printChamber2=44.42857142857143,printChamber3=44.42857142857143,printChamber4=44.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=59.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 59.427067279815674. Used = 59.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 142.5963425, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.6460685089190424, Elapsed = 00:02:22.6051958, TimeTotal = 06:07:52.7668709, Remaining = 06:05:30.1616751, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.7177694, WeightTotalEstimate = 01:01:23.7177694, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.2580176, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:22.6051958, HeatingEstimate = 01:07:37.4036575, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.8194606, WeightEstimate = 01:01:23.7177694 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6460685089190424;StartedAtUtc;00:02:22.6051958;06:07:52.7668709;06:05:30.1616751;False;232;0;0;00:00:00;01:01:23.7177694;01:01:23.7177694;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.2580176;00:00:00;02:00:00;00:02:22.6051958;01:07:37.4036575;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.8194606 [PrintingService.cs@1918] -06/13/2026 19:27:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=45.42857142857143,printChamber1=45.42857142857143,printChamber2=45.42857142857143,printChamber3=45.42857142857143,printChamber4=45.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=60.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 60.427067279815674. Used = 60.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 150.0965672, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.6800457538778553, Elapsed = 00:02:30.1049104, TimeTotal = 06:07:52.7663608, Remaining = 06:05:22.6614504, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.7177694, WeightTotalEstimate = 01:01:23.7177694, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.2580176, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:30.1049104, HeatingEstimate = 01:07:29.9034328, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.8194606, WeightEstimate = 01:01:23.7177694 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6800457538778553;StartedAtUtc;00:02:30.1049104;06:07:52.7663608;06:05:22.6614504;False;232;0;0;00:00:00;01:01:23.7177694;01:01:23.7177694;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.2580176;00:00:00;02:00:00;00:02:30.1049104;01:07:29.9034328;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.8194606 [PrintingService.cs@1918] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=46.42857142857143,printChamber1=46.42857142857143,printChamber2=46.42857142857143,printChamber3=46.42857142857143,printChamber4=46.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=350799, estimate=49.58460516125877 for layer 3, Z=0.301 [PrintingService.cs@1524] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 3, island count 10 [PrintingService.cs@1569] -06/13/2026 19:27:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 4, start=0, count=232, Z=0.401 [PrintingService.cs@1518] -06/13/2026 19:27:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 201, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=61.02165222167969, Elapsed=00:00:30.5248795 [ControlledHeating.cs@486] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 61.02165222167969 after 00:00:30.5249501 [ControlledHeating.cs@493] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1991776. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632689. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2631300. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2735610. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:27:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1626219076879 (1626219076879 @ 0) for mcu = 13537.397246 [10/06/2026 14:33:57] (13551.825640658333 sec) to 1628630997608 (from now=1628510997608, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1626219076879 (1626219076879 @ 0) for mcu = 13537.397246 [10/06/2026 14:33:57] (13551.825640658333 sec) to 1628630997608 (from external timestamp, flags=None, requested=1628630997608 (1628630997608 @ 0) for mcu = 13557.496838 [10/06/2026 14:34:17] (13571.924980066668 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1626219076879 (1626219076879 @ 0) for mcu = 13537.397246 [10/06/2026 14:33:57] (13551.825640658333 sec) to 1628630997608 (from external timestamp, flags=None, requested=1628630997608 (1628630997608 @ 0) for mcu = 13557.496838 [10/06/2026 14:34:17] (13571.924980066668 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:27:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:28:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=61.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:28:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 61.427067279815674. Used = 61.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 157.6012037, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.713652843200823, Elapsed = 00:02:37.6097095, TimeTotal = 06:08:04.9270064, Remaining = 06:05:27.3172969, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:35.8782524, WeightTotalEstimate = 01:01:35.8782524, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.4185006, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:37.6097095, HeatingEstimate = 01:07:22.3987963, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:02.9799436, WeightEstimate = 01:01:35.8782524 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.713652843200823;StartedAtUtc;00:02:37.6097095;06:08:04.9270064;06:05:27.3172969;False;232;0;0;00:00:00;01:01:35.8782524;01:01:35.8782524;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.4185006;00:00:00;02:00:00;00:02:37.6097095;01:07:22.3987963;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:02.9799436 [PrintingService.cs@1918] -06/13/2026 19:28:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=47.42857142857143,printChamber1=47.42857142857143,printChamber2=47.42857142857143,printChamber3=47.42857142857143,printChamber4=47.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=41.42857142857143,powderChamber1=41.42857142857143,powderChamber2=41.42857142857143,powderChamber3=41.42857142857143,powderChamber4=41.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9917935. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3818293. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:28:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:28:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:28:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=62.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:28:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 62.427067279815674. Used = 62.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 165.1039418, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.7476243603034399, Elapsed = 00:02:45.1122931, TimeTotal = 06:08:04.9268519, Remaining = 06:05:19.8145588, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:35.8782524, WeightTotalEstimate = 01:01:35.8782524, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.4185006, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:45.1122931, HeatingEstimate = 01:07:14.8960582, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:02.9799436, WeightEstimate = 01:01:35.8782524 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7476243603034399;StartedAtUtc;00:02:45.1122931;06:08:04.9268519;06:05:19.8145588;False;232;0;0;00:00:00;01:01:35.8782524;01:01:35.8782524;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.4185006;00:00:00;02:00:00;00:02:45.1122931;01:07:14.8960582;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:02.9799436 [PrintingService.cs@1918] -06/13/2026 19:28:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=48.42857142857143,printChamber1=48.42857142857143,printChamber2=48.42857142857143,printChamber3=48.42857142857143,printChamber4=48.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=42.42857142857143,powderChamber1=42.42857142857143,powderChamber2=42.42857142857143,powderChamber3=42.42857142857143,powderChamber4=42.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0207076 ~ 6 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:28:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=63.427067279815674 [ControlledHeating.cs@169] -06/13/2026 19:28:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 63.427067279815674. Used = 63.427067279815674 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 172.6054327, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.7815908582048359, Elapsed = 00:02:52.6137692, TimeTotal = 06:08:04.9268371, Remaining = 06:05:12.3130679, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:35.8782524, WeightTotalEstimate = 01:01:35.8782524, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.4185006, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:52.6137692, HeatingEstimate = 01:07:07.3945673, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:02.9799436, WeightEstimate = 01:01:35.8782524 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7815908582048359;StartedAtUtc;00:02:52.6137692;06:08:04.9268371;06:05:12.3130679;False;232;0;0;00:00:00;01:01:35.8782524;01:01:35.8782524;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.4185006;00:00:00;02:00:00;00:02:52.6137692;01:07:07.3945673;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:02.9799436 [PrintingService.cs@1918] -06/13/2026 19:28:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=49.42857142857143,printChamber1=49.42857142857143,printChamber2=49.42857142857143,printChamber3=49.42857142857143,printChamber4=49.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:21 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=27.5 that are outside of set tolerance 10 for current step target 42.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:28:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 42.42857 with temperature 41 [HeaterCheck.cs@67] -06/13/2026 19:28:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=64.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:28:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 64.42706727981567. Used = 64.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 180.1059021, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.8155528520834059, Elapsed = 00:03:00.1142508, TimeTotal = 06:08:04.9268493, Remaining = 06:05:04.8125985, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:35.8782524, WeightTotalEstimate = 01:01:35.8782524, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.4185006, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:00.1142508, HeatingEstimate = 01:06:59.8940979, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:02.9799436, WeightEstimate = 01:01:35.8782524 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8155528520834059;StartedAtUtc;00:03:00.1142508;06:08:04.9268493;06:05:04.8125985;False;232;0;0;00:00:00;01:01:35.8782524;01:01:35.8782524;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.4185006;00:00:00;02:00:00;00:03:00.1142508;01:06:59.8940979;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:02.9799436 [PrintingService.cs@1918] -06/13/2026 19:28:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=50.42857142857143,printChamber1=50.42857142857143,printChamber2=50.42857142857143,printChamber3=50.42857142857143,printChamber4=50.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=65.47114562988281, Elapsed=00:00:30.1989075 [ControlledHeating.cs@486] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 65.47114562988281 after 00:00:30.1989662 [ControlledHeating.cs@493] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3151676. SinceCollect=00:01:00.7147719. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=12936, gen1=1221, gen2=159, LatencyMode=Interactive, FreeMemory=5834686464, Live=465588216, HeapSizeBytes=479355696, FragmentedBytes=14074736, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634136. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0733329. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0863936. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:28:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1629842518836 (1629842518836 @ 0) for mcu = 13567.592939 [10/06/2026 14:34:27] (13582.0209903 sec) to 1632294291586 (from now=1632174291586, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1629842518836 (1629842518836 @ 0) for mcu = 13567.592939 [10/06/2026 14:34:27] (13582.0209903 sec) to 1632294291586 (from external timestamp, flags=None, requested=1632294291586 (1632294291586 @ 0) for mcu = 13588.024621 [10/06/2026 14:34:47] (13602.452429883333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1629842518836 (1629842518836 @ 0) for mcu = 13567.592939 [10/06/2026 14:34:27] (13582.0209903 sec) to 1632294291586 (from external timestamp, flags=None, requested=1632294291586 (1632294291586 @ 0) for mcu = 13588.024621 [10/06/2026 14:34:47] (13602.452429883333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:28:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=65.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:28:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 65.42706727981567. Used = 65.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 187.6071498, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.8495183368251443, Elapsed = 00:03:07.6155033, TimeTotal = 06:08:04.9268541, Remaining = 06:04:57.3113508, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:35.8782524, WeightTotalEstimate = 01:01:35.8782524, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.4185006, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:07.6155033, HeatingEstimate = 01:06:52.3928502, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:02.9799436, WeightEstimate = 01:01:35.8782524 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8495183368251443;StartedAtUtc;00:03:07.6155033;06:08:04.9268541;06:04:57.3113508;False;232;0;0;00:00:00;01:01:35.8782524;01:01:35.8782524;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.4185006;00:00:00;02:00:00;00:03:07.6155033;01:06:52.3928502;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:02.9799436 [PrintingService.cs@1918] -06/13/2026 19:28:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=51.42857142857143,printChamber1=51.42857142857143,printChamber2=51.42857142857143,printChamber3=51.42857142857143,printChamber4=51.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1876262. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:28:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:28:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:28:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=66.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:28:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 66.42706727981567. Used = 66.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 195.1082082, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.883483198229725, Elapsed = 00:03:15.1166186, TimeTotal = 06:08:04.9269110, Remaining = 06:04:49.8102924, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:35.8782524, WeightTotalEstimate = 01:01:35.8782524, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.4185006, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:15.1166186, HeatingEstimate = 01:06:44.8917918, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:02.9799436, WeightEstimate = 01:01:35.8782524 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.883483198229725;StartedAtUtc;00:03:15.1166186;06:08:04.9269110;06:04:49.8102924;False;232;0;0;00:00:00;01:01:35.8782524;01:01:35.8782524;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.4185006;00:00:00;02:00:00;00:03:15.1166186;01:06:44.8917918;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:02.9799436 [PrintingService.cs@1918] -06/13/2026 19:28:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=52.42857142857143,printChamber1=52.42857142857143,printChamber2=52.42857142857143,printChamber3=52.42857142857143,printChamber4=52.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=67.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:28:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 67.42706727981567. Used = 67.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 202.6086082, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.9174444896203952, Elapsed = 00:03:22.6169443, TimeTotal = 06:08:04.9268367, Remaining = 06:04:42.3098924, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:35.8782524, WeightTotalEstimate = 01:01:35.8782524, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.4185006, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:22.6169443, HeatingEstimate = 01:06:37.3913918, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:02.9799436, WeightEstimate = 01:01:35.8782524 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9174444896203952;StartedAtUtc;00:03:22.6169443;06:08:04.9268367;06:04:42.3098924;False;232;0;0;00:00:00;01:01:35.8782524;01:01:35.8782524;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.4185006;00:00:00;02:00:00;00:03:22.6169443;01:06:37.3913918;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:02.9799436 [PrintingService.cs@1918] -06/13/2026 19:28:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=53.42857142857143,printChamber1=53.42857142857143,printChamber2=53.42857142857143,printChamber3=53.42857142857143,printChamber4=53.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:28:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262519, estimate=49.96274050922799 for layer 4, Z=0.401 [PrintingService.cs@1524] -06/13/2026 19:28:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 4, island count 10 [PrintingService.cs@1569] -06/13/2026 19:28:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 5, start=0, count=232, Z=0.501 [PrintingService.cs@1518] -06/13/2026 19:28:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:28:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=68.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:28:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 68.42706727981567. Used = 68.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:28:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 210.1094223, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.9513744392989907, Elapsed = 00:03:30.1177768, TimeTotal = 06:08:05.7075953, Remaining = 06:04:35.5898185, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.6589926, WeightTotalEstimate = 01:01:36.6589926, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.1992408, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:30.1177768, HeatingEstimate = 01:06:29.8905777, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.7606838, WeightEstimate = 01:01:36.6589926 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:28:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9513744392989907;StartedAtUtc;00:03:30.1177768;06:08:05.7075953;06:04:35.5898185;False;232;0;0;00:00:00;01:01:36.6589926;01:01:36.6589926;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.1992408;00:00:00;02:00:00;00:03:30.1177768;01:06:29.8905777;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.7606838 [PrintingService.cs@1918] -06/13/2026 19:28:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=54.42857142857143,printChamber1=54.42857142857143,printChamber2=54.42857142857143,printChamber3=54.42857142857143,printChamber4=54.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=67.49179077148438, Elapsed=00:00:30.5360560 [ControlledHeating.cs@486] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 67.49179077148438 after 00:00:30.5372790 [ControlledHeating.cs@493] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2230851. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633098. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2871783. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3065016. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:29:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1633505812814 (1633505812814 @ 0) for mcu = 13598.120755 [10/06/2026 14:34:58] (13612.548440116667 sec) to 1635920647388 (from now=1635800647388, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1633505812814 (1633505812814 @ 0) for mcu = 13598.120755 [10/06/2026 14:34:58] (13612.548440116667 sec) to 1635920647388 (from external timestamp, flags=None, requested=1635920647388 (1635920647388 @ 0) for mcu = 13618.244613 [10/06/2026 14:35:18] (13632.672061566667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1633505812814 (1633505812814 @ 0) for mcu = 13598.120755 [10/06/2026 14:34:58] (13612.548440116667 sec) to 1635920647388 (from external timestamp, flags=None, requested=1635920647388 (1635920647388 @ 0) for mcu = 13618.244613 [10/06/2026 14:35:18] (13632.672061566667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:29:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=69.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 69.42706727981567. Used = 69.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 217.613712, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 0.9853524117390362, Elapsed = 00:03:37.6220523, TimeTotal = 06:08:05.7075811, Remaining = 06:04:28.0855288, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.6589926, WeightTotalEstimate = 01:01:36.6589926, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.1992408, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:37.6220523, HeatingEstimate = 01:06:22.3862880, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.7606838, WeightEstimate = 01:01:36.6589926 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9853524117390362;StartedAtUtc;00:03:37.6220523;06:08:05.7075811;06:04:28.0855288;False;232;0;0;00:00:00;01:01:36.6589926;01:01:36.6589926;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.1992408;00:00:00;02:00:00;00:03:37.6220523;01:06:22.3862880;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.7606838 [PrintingService.cs@1918] -06/13/2026 19:29:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=55.42857142857143,printChamber1=55.42857142857143,printChamber2=55.42857142857143,printChamber3=55.42857142857143,printChamber4=55.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 42.42857 with temperature 29.25 [HeaterCheck.cs@111] -06/13/2026 19:29:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9958786. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4152994. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:29:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:29:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:29:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=70.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 70.42706727981567. Used = 70.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 225.1164249, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.0193233388788419, Elapsed = 00:03:45.1247720, TimeTotal = 06:08:05.7075879, Remaining = 06:04:20.5828159, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.6589926, WeightTotalEstimate = 01:01:36.6589926, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.1992408, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:45.1247720, HeatingEstimate = 01:06:14.8835751, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.7606838, WeightEstimate = 01:01:36.6589926 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0193233388788419;StartedAtUtc;00:03:45.1247720;06:08:05.7075879;06:04:20.5828159;False;232;0;0;00:00:00;01:01:36.6589926;01:01:36.6589926;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.1992408;00:00:00;02:00:00;00:03:45.1247720;01:06:14.8835751;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.7606838 [PrintingService.cs@1918] -06/13/2026 19:29:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=56.42857142857143,printChamber1=56.42857142857143,printChamber2=56.42857142857143,printChamber3=56.42857142857143,printChamber4=56.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1498424 ~ 6 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:29:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=71.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 71.42706727981567. Used = 71.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 232.6235116, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.053314745357885, Elapsed = 00:03:52.6320163, TimeTotal = 06:08:05.7077455, Remaining = 06:04:13.0757292, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.6589926, WeightTotalEstimate = 01:01:36.6589926, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.1992408, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:52.6320163, HeatingEstimate = 01:06:07.3764884, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.7606838, WeightEstimate = 01:01:36.6589926 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.053314745357885;StartedAtUtc;00:03:52.6320163;06:08:05.7077455;06:04:13.0757292;False;232;0;0;00:00:00;01:01:36.6589926;01:01:36.6589926;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.1992408;00:00:00;02:00:00;00:03:52.6320163;01:06:07.3764884;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.7606838 [PrintingService.cs@1918] -06/13/2026 19:29:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=57.42857142857143,printChamber1=57.42857142857143,printChamber2=57.42857142857143,printChamber3=57.42857142857143,printChamber4=57.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=72.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 72.42706727981567. Used = 72.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 240.1258354, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.0872831159501, Elapsed = 00:04:00.1341695, TimeTotal = 06:08:05.7075749, Remaining = 06:04:05.5734054, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.6589926, WeightTotalEstimate = 01:01:36.6589926, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.1992408, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:00.1341695, HeatingEstimate = 01:05:59.8741646, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.7606838, WeightEstimate = 01:01:36.6589926 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0872831159501;StartedAtUtc;00:04:00.1341695;06:08:05.7075749;06:04:05.5734054;False;232;0;0;00:00:00;01:01:36.6589926;01:01:36.6589926;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.1992408;00:00:00;02:00:00;00:04:00.1341695;01:05:59.8741646;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.7606838 [PrintingService.cs@1918] -06/13/2026 19:29:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=58.42857142857143,printChamber1=58.42857142857143,printChamber2=58.42857142857143,printChamber3=58.42857142857143,printChamber4=58.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=70.88177490234375, Elapsed=00:00:30.2062170 [ControlledHeating.cs@486] -06/13/2026 19:29:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 70.88177490234375 after 00:00:30.2063199 [ControlledHeating.cs@493] -06/13/2026 19:29:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4547485. SinceCollect=00:01:00.8832124. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13033, gen1=1228, gen2=160, LatencyMode=Interactive, FreeMemory=5868666880, Live=465890896, HeapSizeBytes=479768896, FragmentedBytes=14210184, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0564891. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0658422. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0797519. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:29:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1637132168616 (1637132168616 @ 0) for mcu = 13628.340758 [10/06/2026 14:35:28] (13642.7680718 sec) to 1639599413722 (from now=1639479413722, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1637132168616 (1637132168616 @ 0) for mcu = 13628.340758 [10/06/2026 14:35:28] (13642.7680718 sec) to 1639599413722 (from external timestamp, flags=None, requested=1639599413722 (1639599413722 @ 0) for mcu = 13648.901379 [10/06/2026 14:35:48] (13663.328447683334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1637132168616 (1637132168616 @ 0) for mcu = 13628.340758 [10/06/2026 14:35:28] (13642.7680718 sec) to 1639599413722 (from external timestamp, flags=None, requested=1639599413722 (1639599413722 @ 0) for mcu = 13648.901379 [10/06/2026 14:35:48] (13663.328447683334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:29:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:29:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=73.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 73.42706727981567. Used = 73.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 247.6248186, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.121237157019242, Elapsed = 00:04:07.6331598, TimeTotal = 06:08:05.7075820, Remaining = 06:03:58.0744222, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.6589926, WeightTotalEstimate = 01:01:36.6589926, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.1992408, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:07.6331598, HeatingEstimate = 01:05:52.3751814, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.7606838, WeightEstimate = 01:01:36.6589926 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.121237157019242;StartedAtUtc;00:04:07.6331598;06:08:05.7075820;06:03:58.0744222;False;232;0;0;00:00:00;01:01:36.6589926;01:01:36.6589926;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.1992408;00:00:00;02:00:00;00:04:07.6331598;01:05:52.3751814;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.7606838 [PrintingService.cs@1918] -06/13/2026 19:29:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=59.42857142857143,printChamber1=59.42857142857143,printChamber2=59.42857142857143,printChamber3=59.42857142857143,printChamber4=59.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1848774. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:29:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:29:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:29:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=74.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 74.42706727981567. Used = 74.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 255.1283641, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.1552118181705924, Elapsed = 00:04:15.1367041, TimeTotal = 06:08:05.7075808, Remaining = 06:03:50.5708767, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.6589926, WeightTotalEstimate = 01:01:36.6589926, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.1992408, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:15.1367041, HeatingEstimate = 01:05:44.8716359, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.7606838, WeightEstimate = 01:01:36.6589926 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:33:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1552118181705924;StartedAtUtc;00:04:15.1367041;06:08:05.7075808;06:03:50.5708767;False;232;0;0;00:00:00;01:01:36.6589926;01:01:36.6589926;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.1992408;00:00:00;02:00:00;00:04:15.1367041;01:05:44.8716359;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.7606838 [PrintingService.cs@1918] -06/13/2026 19:29:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=60.42857142857143,printChamber1=60.42857142857143,printChamber2=60.42857142857143,printChamber3=60.42857142857143,printChamber4=60.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351458, estimate=49.302377497043366 for layer 5, Z=0.501 [PrintingService.cs@1524] -06/13/2026 19:29:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 5, island count 7 [PrintingService.cs@1569] -06/13/2026 19:29:44 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 6, start=0, count=232, Z=0.601 [PrintingService.cs@1518] -06/13/2026 19:29:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:29:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=43.42857142857143,powderChamber1=43.42857142857143,powderChamber2=43.42857142857143,powderChamber3=43.42857142857143,powderChamber4=43.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=75.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 75.42706727981567. Used = 75.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 262.6311312, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.1876160731319496, Elapsed = 00:04:22.6394816, TimeTotal = 06:08:34.8473435, Remaining = 06:04:12.2078619, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.7987449, WeightTotalEstimate = 01:02:05.7987449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3389931, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:22.6394816, HeatingEstimate = 01:05:37.3688688, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9004361, WeightEstimate = 01:02:05.7987449 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1876160731319496;StartedAtUtc;00:04:22.6394816;06:08:34.8473435;06:04:12.2078619;False;232;0;0;00:00:00;01:02:05.7987449;01:02:05.7987449;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3389931;00:00:00;02:00:00;00:04:22.6394816;01:05:37.3688688;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9004361 [PrintingService.cs@1918] -06/13/2026 19:29:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=61.42857142857143,printChamber1=61.42857142857143,printChamber2=61.42857142857143,printChamber3=61.42857142857143,printChamber4=61.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=44.42857142857143,powderChamber1=44.42857142857143,powderChamber2=44.42857142857143,powderChamber3=44.42857142857143,powderChamber4=44.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:29:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=76.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:29:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 76.42706727981567. Used = 76.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 270.1347265, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.2215461648655463, Elapsed = 00:04:30.1430695, TimeTotal = 06:08:34.8473361, Remaining = 06:04:04.7042666, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.7987449, WeightTotalEstimate = 01:02:05.7987449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3389931, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:30.1430695, HeatingEstimate = 01:05:29.8652735, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9004361, WeightEstimate = 01:02:05.7987449 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2215461648655463;StartedAtUtc;00:04:30.1430695;06:08:34.8473361;06:04:04.7042666;False;232;0;0;00:00:00;01:02:05.7987449;01:02:05.7987449;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3389931;00:00:00;02:00:00;00:04:30.1430695;01:05:29.8652735;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9004361 [PrintingService.cs@1918] -06/13/2026 19:29:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=62.42857142857143,printChamber1=62.42857142857143,printChamber2=62.42857142857143,printChamber3=62.42857142857143,printChamber4=62.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=76.46871185302734, Elapsed=00:00:30.6621135 [ControlledHeating.cs@486] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 76.46871185302734 after 00:00:30.6621689 [ControlledHeating.cs@493] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2073417. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0612722. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2711132. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2837608. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:30:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1640810934950 (1640810934950 @ 0) for mcu = 13658.997530 [10/06/2026 14:35:58] (13673.424457916666 sec) to 1643223834481 (from now=1643103834481, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1640810934950 (1640810934950 @ 0) for mcu = 13658.997530 [10/06/2026 14:35:58] (13673.424457916666 sec) to 1643223834481 (from external timestamp, flags=None, requested=1643223834481 (1643223834481 @ 0) for mcu = 13679.105275 [10/06/2026 14:36:19] (13693.531954008333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1640810934950 (1640810934950 @ 0) for mcu = 13658.997530 [10/06/2026 14:35:58] (13673.424457916666 sec) to 1643223834481 (from external timestamp, flags=None, requested=1643223834481 (1643223834481 @ 0) for mcu = 13679.105275 [10/06/2026 14:36:19] (13693.531954008333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:30:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:04 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=30.75 that are outside of set tolerance 10 for current step target 44.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:30:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=77.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 77.42706727981567. Used = 77.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 277.6399933, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.2554839158031932, Elapsed = 00:04:37.6483515, TimeTotal = 06:08:34.8473513, Remaining = 06:03:57.1989998, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.7987449, WeightTotalEstimate = 01:02:05.7987449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3389931, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:37.6483515, HeatingEstimate = 01:05:22.3600067, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9004361, WeightEstimate = 01:02:05.7987449 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2554839158031932;StartedAtUtc;00:04:37.6483515;06:08:34.8473513;06:03:57.1989998;False;232;0;0;00:00:00;01:02:05.7987449;01:02:05.7987449;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3389931;00:00:00;02:00:00;00:04:37.6483515;01:05:22.3600067;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9004361 [PrintingService.cs@1918] -06/13/2026 19:30:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=63.42857142857143,printChamber1=63.42857142857143,printChamber2=63.42857142857143,printChamber3=63.42857142857143,printChamber4=63.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 44.42857 with temperature 30.25 [HeaterCheck.cs@111] -06/13/2026 19:30:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9912712. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3919164. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:30:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:30:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:30:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=78.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 78.42706727981567. Used = 78.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 285.1455905, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.289423701694525, Elapsed = 00:04:45.1540851, TimeTotal = 06:08:34.8474877, Remaining = 06:03:49.6934026, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.7987449, WeightTotalEstimate = 01:02:05.7987449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3389931, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:45.1540851, HeatingEstimate = 01:05:14.8544095, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9004361, WeightEstimate = 01:02:05.7987449 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.289423701694525;StartedAtUtc;00:04:45.1540851;06:08:34.8474877;06:03:49.6934026;False;232;0;0;00:00:00;01:02:05.7987449;01:02:05.7987449;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3389931;00:00:00;02:00:00;00:04:45.1540851;01:05:14.8544095;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9004361 [PrintingService.cs@1918] -06/13/2026 19:30:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=64.42857142857143,printChamber1=64.42857142857143,printChamber2=64.42857142857143,printChamber3=64.42857142857143,printChamber4=64.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0672134 ~ 5.99 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:30:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=79.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 79.42706727981567. Used = 79.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 292.6494916, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.3233569581486537, Elapsed = 00:04:52.6583782, TimeTotal = 06:08:34.8478797, Remaining = 06:03:42.1895015, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.7987449, WeightTotalEstimate = 01:02:05.7987449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3389931, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:52.6583782, HeatingEstimate = 01:05:07.3505084, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9004361, WeightEstimate = 01:02:05.7987449 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3233569581486537;StartedAtUtc;00:04:52.6583782;06:08:34.8478797;06:03:42.1895015;False;232;0;0;00:00:00;01:02:05.7987449;01:02:05.7987449;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3389931;00:00:00;02:00:00;00:04:52.6583782;01:05:07.3505084;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9004361 [PrintingService.cs@1918] -06/13/2026 19:30:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=65.42857142857143,printChamber1=65.42857142857143,printChamber2=65.42857142857143,printChamber3=65.42857142857143,printChamber4=65.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262856, estimate=49.54193485797655 for layer 6, Z=0.601 [PrintingService.cs@1524] -06/13/2026 19:30:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 6, island count 7 [PrintingService.cs@1569] -06/13/2026 19:30:22 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 7, start=0, count=232, Z=0.701 [PrintingService.cs@1518] -06/13/2026 19:30:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:30:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=80.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 80.42706727981567. Used = 80.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 300.1482539, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.3554916903716918, Elapsed = 00:05:00.1566283, TimeTotal = 06:09:03.7453606, Remaining = 06:04:03.5887323, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.6967380, WeightTotalEstimate = 01:02:34.6967380, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:41.2369862, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:00.1566283, HeatingEstimate = 01:04:59.8517461, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.7984292, WeightEstimate = 01:02:34.6967380 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3554916903716918;StartedAtUtc;00:05:00.1566283;06:09:03.7453606;06:04:03.5887323;False;232;0;0;00:00:00;01:02:34.6967380;01:02:34.6967380;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:41.2369862;00:00:00;02:00:00;00:05:00.1566283;01:04:59.8517461;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.7984292 [PrintingService.cs@1918] -06/13/2026 19:30:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=66.42857142857143,printChamber1=66.42857142857143,printChamber2=66.42857142857143,printChamber3=66.42857142857143,printChamber4=66.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=81.00337219238281, Elapsed=00:00:30.2020681 [ControlledHeating.cs@486] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 81.00337219238281 after 00:00:30.2021551 [ControlledHeating.cs@493] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3181301. SinceCollect=00:01:00.7274097. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13127, gen1=1235, gen2=161, LatencyMode=Interactive, FreeMemory=5826641920, Live=465893200, HeapSizeBytes=479830904, FragmentedBytes=14194440, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633730. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0667659. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0773852. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:30:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1644435355709 (1644435355709 @ 0) for mcu = 13689.201431 [10/06/2026 14:36:29] (13703.627964241667 sec) to 1646886321153 (from now=1646766321153, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1644435355709 (1644435355709 @ 0) for mcu = 13689.201431 [10/06/2026 14:36:29] (13703.627964241667 sec) to 1646886321153 (from external timestamp, flags=None, requested=1646886321153 (1646886321153 @ 0) for mcu = 13709.626397 [10/06/2026 14:36:49] (13724.052676275 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1644435355709 (1644435355709 @ 0) for mcu = 13689.201431 [10/06/2026 14:36:29] (13703.627964241667 sec) to 1646886321153 (from external timestamp, flags=None, requested=1646886321153 (1646886321153 @ 0) for mcu = 13709.626397 [10/06/2026 14:36:49] (13724.052676275 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:30:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:30:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=81.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 81.42706727981567. Used = 81.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 307.6484054, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.3893632118600197, Elapsed = 00:05:07.6570556, TimeTotal = 06:09:03.7456364, Remaining = 06:03:56.0885808, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.6967380, WeightTotalEstimate = 01:02:34.6967380, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:41.2369862, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:07.6570556, HeatingEstimate = 01:04:52.3515946, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.7984292, WeightEstimate = 01:02:34.6967380 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3893632118600197;StartedAtUtc;00:05:07.6570556;06:09:03.7456364;06:03:56.0885808;False;232;0;0;00:00:00;01:02:34.6967380;01:02:34.6967380;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:41.2369862;00:00:00;02:00:00;00:05:07.6570556;01:04:52.3515946;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.7984292 [PrintingService.cs@1918] -06/13/2026 19:30:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=67.42857142857143,printChamber1=67.42857142857143,printChamber2=67.42857142857143,printChamber3=67.42857142857143,printChamber4=67.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1837490. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:30:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:30:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:30:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=82.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 82.42706727981567. Used = 82.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 315.1485893, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.4232322937334447, Elapsed = 00:05:15.1569346, TimeTotal = 06:09:03.7453315, Remaining = 06:03:48.5883969, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.6967380, WeightTotalEstimate = 01:02:34.6967380, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:41.2369862, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:15.1569346, HeatingEstimate = 01:04:44.8514107, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.7984292, WeightEstimate = 01:02:34.6967380 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4232322937334447;StartedAtUtc;00:05:15.1569346;06:09:03.7453315;06:03:48.5883969;False;232;0;0;00:00:00;01:02:34.6967380;01:02:34.6967380;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:41.2369862;00:00:00;02:00:00;00:05:15.1569346;01:04:44.8514107;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.7984292 [PrintingService.cs@1918] -06/13/2026 19:30:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=68.42857142857143,printChamber1=68.42857142857143,printChamber2=68.42857142857143,printChamber3=68.42857142857143,printChamber4=68.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=83.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 83.42706727981567. Used = 83.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 322.6487389, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.4571032202030865, Elapsed = 00:05:22.6572284, TimeTotal = 06:09:03.7454757, Remaining = 06:03:41.0882473, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.6967380, WeightTotalEstimate = 01:02:34.6967380, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:41.2369862, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:22.6572284, HeatingEstimate = 01:04:37.3512611, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.7984292, WeightEstimate = 01:02:34.6967380 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4571032202030865;StartedAtUtc;00:05:22.6572284;06:09:03.7454757;06:03:41.0882473;False;232;0;0;00:00:00;01:02:34.6967380;01:02:34.6967380;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:41.2369862;00:00:00;02:00:00;00:05:22.6572284;01:04:37.3512611;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.7984292 [PrintingService.cs@1918] -06/13/2026 19:30:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=69.42857142857143,printChamber1=69.42857142857143,printChamber2=69.42857142857143,printChamber3=69.42857142857143,printChamber4=69.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:30:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=84.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:30:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 84.42706727981567. Used = 84.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:30:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 330.1519944, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.4909872959366843, Elapsed = 00:05:30.1604311, TimeTotal = 06:09:03.7454229, Remaining = 06:03:33.5849918, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.6967380, WeightTotalEstimate = 01:02:34.6967380, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:41.2369862, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:30.1604311, HeatingEstimate = 01:04:29.8480056, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.7984292, WeightEstimate = 01:02:34.6967380 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:30:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4909872959366843;StartedAtUtc;00:05:30.1604311;06:09:03.7454229;06:03:33.5849918;False;232;0;0;00:00:00;01:02:34.6967380;01:02:34.6967380;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:41.2369862;00:00:00;02:00:00;00:05:30.1604311;01:04:29.8480056;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.7984292 [PrintingService.cs@1918] -06/13/2026 19:30:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=70.42857142857143,printChamber1=70.42857142857143,printChamber2=70.42857142857143,printChamber3=70.42857142857143,printChamber4=70.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=82.61888885498047, Elapsed=00:00:30.5206285 [ControlledHeating.cs@486] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 82.61888885498047 after 00:00:30.5206902 [ControlledHeating.cs@493] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2033472. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0623668. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2681397. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2817810. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:31:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1648097842381 (1648097842381 @ 0) for mcu = 13719.722514 [10/06/2026 14:36:59] (13734.148686508333 sec) to 1650510865013 (from now=1650390865013, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1648097842381 (1648097842381 @ 0) for mcu = 13719.722514 [10/06/2026 14:36:59] (13734.148686508333 sec) to 1650510865013 (from external timestamp, flags=None, requested=1650510865013 (1650510865013 @ 0) for mcu = 13739.831280 [10/06/2026 14:37:19] (13754.257208441666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1648097842381 (1648097842381 @ 0) for mcu = 13719.722514 [10/06/2026 14:36:59] (13734.148686508333 sec) to 1650510865013 (from external timestamp, flags=None, requested=1650510865013 (1650510865013 @ 0) for mcu = 13739.831280 [10/06/2026 14:37:19] (13754.257208441666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:31:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=85.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 85.42706727981567. Used = 85.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 337.6544753, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.5248676660997404, Elapsed = 00:05:37.6628125, TimeTotal = 06:09:03.7453234, Remaining = 06:03:26.0825109, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.6967380, WeightTotalEstimate = 01:02:34.6967380, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:41.2369862, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:37.6628125, HeatingEstimate = 01:04:22.3455247, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.7984292, WeightEstimate = 01:02:34.6967380 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5248676660997404;StartedAtUtc;00:05:37.6628125;06:09:03.7453234;06:03:26.0825109;False;232;0;0;00:00:00;01:02:34.6967380;01:02:34.6967380;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:41.2369862;00:00:00;02:00:00;00:05:37.6628125;01:04:22.3455247;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.7984292 [PrintingService.cs@1918] -06/13/2026 19:31:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=71.42857142857143,printChamber1=71.42857142857143,printChamber2=71.42857142857143,printChamber3=71.42857142857143,printChamber4=71.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351471, estimate=49.235586753453056 for layer 7, Z=0.701 [PrintingService.cs@1524] -06/13/2026 19:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 7, island count 7 [PrintingService.cs@1569] -06/13/2026 19:31:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 8, start=0, count=232, Z=0.801 [PrintingService.cs@1518] -06/13/2026 19:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:31:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=86.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 86.42706727981567. Used = 86.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 345.1575006, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.5586509204432548, Elapsed = 00:05:45.1658630, TimeTotal = 06:09:05.1678803, Remaining = 06:03:20.0020173, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:36.1192697, WeightTotalEstimate = 01:02:36.1192697, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.6595179, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:45.1658630, HeatingEstimate = 01:04:14.8424994, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:03.2209609, WeightEstimate = 01:02:36.1192697 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5586509204432548;StartedAtUtc;00:05:45.1658630;06:09:05.1678803;06:03:20.0020173;False;232;0;0;00:00:00;01:02:36.1192697;01:02:36.1192697;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.6595179;00:00:00;02:00:00;00:05:45.1658630;01:04:14.8424994;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:03.2209609 [PrintingService.cs@1918] -06/13/2026 19:31:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=72.42857142857143,printChamber1=72.42857142857143,printChamber2=72.42857142857143,printChamber3=72.42857142857143,printChamber4=72.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9975512. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3880050. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:31:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:31:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:31:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0681652 ~ 6.01 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:31:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=87.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 87.42706727981567. Used = 87.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 352.657147, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.5925169789255011, Elapsed = 00:05:52.6655593, TimeTotal = 06:09:05.1679302, Remaining = 06:03:12.5023709, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:36.1192697, WeightTotalEstimate = 01:02:36.1192697, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.6595179, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:52.6655593, HeatingEstimate = 01:04:07.3428530, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:03.2209609, WeightEstimate = 01:02:36.1192697 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5925169789255011;StartedAtUtc;00:05:52.6655593;06:09:05.1679302;06:03:12.5023709;False;232;0;0;00:00:00;01:02:36.1192697;01:02:36.1192697;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.6595179;00:00:00;02:00:00;00:05:52.6655593;01:04:07.3428530;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:03.2209609 [PrintingService.cs@1918] -06/13/2026 19:31:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=73.42857142857143,printChamber1=73.42857142857143,printChamber2=73.42857142857143,printChamber3=73.42857142857143,printChamber4=73.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=88.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 88.42706727981567. Used = 88.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 360.1589711, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.6263923330507728, Elapsed = 00:06:00.1673122, TimeTotal = 06:09:05.1678590, Remaining = 06:03:05.0005468, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:36.1192697, WeightTotalEstimate = 01:02:36.1192697, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.6595179, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:00.1673122, HeatingEstimate = 01:03:59.8410289, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:03.2209609, WeightEstimate = 01:02:36.1192697 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6263923330507728;StartedAtUtc;00:06:00.1673122;06:09:05.1678590;06:03:05.0005468;False;232;0;0;00:00:00;01:02:36.1192697;01:02:36.1192697;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.6595179;00:00:00;02:00:00;00:06:00.1673122;01:03:59.8410289;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:03.2209609 [PrintingService.cs@1918] -06/13/2026 19:31:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=74.42857142857143,printChamber1=74.42857142857143,printChamber2=74.42857142857143,printChamber3=74.42857142857143,printChamber4=74.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=90.06571960449219, Elapsed=00:00:30.2007608 [ControlledHeating.cs@486] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 90.06571960449219 after 00:00:30.2008771 [ControlledHeating.cs@493] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3171568. SinceCollect=00:01:00.7231130. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13216, gen1=1246, gen2=162, LatencyMode=Interactive, FreeMemory=5809651712, Live=465931280, HeapSizeBytes=479870440, FragmentedBytes=14187240, TotalCommittedBytes=487374848, PinnedObjectsCount=27, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625931. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0672385. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0844650. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:31:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1651722386241 (1651722386241 @ 0) for mcu = 13749.927410 [10/06/2026 14:37:29] (13764.353218675 sec) to 1654173872912 (from now=1654053872912, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1651722386241 (1651722386241 @ 0) for mcu = 13749.927410 [10/06/2026 14:37:29] (13764.353218675 sec) to 1654173872912 (from external timestamp, flags=None, requested=1654173872912 (1654173872912 @ 0) for mcu = 13770.356711 [10/06/2026 14:37:50] (13784.782274266667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1651722386241 (1651722386241 @ 0) for mcu = 13749.927410 [10/06/2026 14:37:29] (13764.353218675 sec) to 1654173872912 (from external timestamp, flags=None, requested=1654173872912 (1654173872912 @ 0) for mcu = 13770.356711 [10/06/2026 14:37:50] (13784.782274266667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:31:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:31:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=89.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 89.42706727981567. Used = 89.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 367.657874, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.6602552507268762, Elapsed = 00:06:07.6663138, TimeTotal = 06:09:05.1679577, Remaining = 06:02:57.5016439, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:36.1192697, WeightTotalEstimate = 01:02:36.1192697, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.6595179, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:07.6663138, HeatingEstimate = 01:03:52.3421260, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:03.2209609, WeightEstimate = 01:02:36.1192697 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6602552507268762;StartedAtUtc;00:06:07.6663138;06:09:05.1679577;06:02:57.5016439;False;232;0;0;00:00:00;01:02:36.1192697;01:02:36.1192697;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.6595179;00:00:00;02:00:00;00:06:07.6663138;01:03:52.3421260;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:03.2209609 [PrintingService.cs@1918] -06/13/2026 19:31:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=75.42857142857143,printChamber1=75.42857142857143,printChamber2=75.42857142857143,printChamber3=75.42857142857143,printChamber4=75.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=90.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 90.42706727981567. Used = 90.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 375.160866, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.6941357434703386, Elapsed = 00:06:15.1692041, TimeTotal = 06:09:05.1678560, Remaining = 06:02:49.9986519, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:36.1192697, WeightTotalEstimate = 01:02:36.1192697, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.6595179, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:15.1692041, HeatingEstimate = 01:03:44.8391340, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:03.2209609, WeightEstimate = 01:02:36.1192697 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:34:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6941357434703386;StartedAtUtc;00:06:15.1692041;06:09:05.1678560;06:02:49.9986519;False;232;0;0;00:00:00;01:02:36.1192697;01:02:36.1192697;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.6595179;00:00:00;02:00:00;00:06:15.1692041;01:03:44.8391340;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:03.2209609 [PrintingService.cs@1918] -06/13/2026 19:31:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=76.42857142857143,printChamber1=76.42857142857143,printChamber2=76.42857142857143,printChamber3=76.42857142857143,printChamber4=76.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9748362. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1931937. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:31:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:31:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:31:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 44.42857 with temperature 44.75 [HeaterCheck.cs@67] -06/13/2026 19:31:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262875, estimate=49.302965565536795 for layer 8, Z=0.801 [PrintingService.cs@1524] -06/13/2026 19:31:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 8, island count 7 [PrintingService.cs@1569] -06/13/2026 19:31:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 9, start=0, count=232, Z=0.901 [PrintingService.cs@1518] -06/13/2026 19:31:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:31:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=91.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 91.42706727981567. Used = 91.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 382.6649725, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.7253700508520677, Elapsed = 00:06:22.6733159, TimeTotal = 06:09:39.2024100, Remaining = 06:03:16.5290941, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:10.1538184, WeightTotalEstimate = 01:03:10.1538184, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.6940666, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:22.6733159, HeatingEstimate = 01:03:37.3350275, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.2555096, WeightEstimate = 01:03:10.1538184 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7253700508520677;StartedAtUtc;00:06:22.6733159;06:09:39.2024100;06:03:16.5290941;False;232;0;0;00:00:00;01:03:10.1538184;01:03:10.1538184;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.6940666;00:00:00;02:00:00;00:06:22.6733159;01:03:37.3350275;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.2555096 [PrintingService.cs@1918] -06/13/2026 19:31:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=77.42857142857143,printChamber1=77.42857142857143,printChamber2=77.42857142857143,printChamber3=77.42857142857143,printChamber4=77.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:31:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=92.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:31:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 92.42706727981567. Used = 92.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 390.1648512, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.7591856819195433, Elapsed = 00:06:30.1733560, TimeTotal = 06:09:39.2025714, Remaining = 06:03:09.0292154, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:10.1538184, WeightTotalEstimate = 01:03:10.1538184, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.6940666, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:30.1733560, HeatingEstimate = 01:03:29.8351488, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.2555096, WeightEstimate = 01:03:10.1538184 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7591856819195433;StartedAtUtc;00:06:30.1733560;06:09:39.2025714;06:03:09.0292154;False;232;0;0;00:00:00;01:03:10.1538184;01:03:10.1538184;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.6940666;00:00:00;02:00:00;00:06:30.1733560;01:03:29.8351488;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.2555096 [PrintingService.cs@1918] -06/13/2026 19:31:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=78.42857142857143,printChamber1=78.42857142857143,printChamber2=78.42857142857143,printChamber3=78.42857142857143,printChamber4=78.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 44.42857 with temperature 32.75 [HeaterCheck.cs@111] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=92.67192840576172, Elapsed=00:00:30.5265450 [ControlledHeating.cs@486] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 92.67192840576172 after 00:00:30.5266113 [ControlledHeating.cs@493] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2045035. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634448. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2688954. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2815928. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:32:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1655385394140 (1655385394140 @ 0) for mcu = 13780.452886 [10/06/2026 14:38:00] (13794.8782845 sec) to 1657797481701 (from now=1657677481701, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1655385394140 (1655385394140 @ 0) for mcu = 13780.452886 [10/06/2026 14:38:00] (13794.8782845 sec) to 1657797481701 (from external timestamp, flags=None, requested=1657797481701 (1657797481701 @ 0) for mcu = 13800.553873 [10/06/2026 14:38:20] (13814.979014175 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1655385394140 (1655385394140 @ 0) for mcu = 13780.452886 [10/06/2026 14:38:00] (13794.8782845 sec) to 1657797481701 (from external timestamp, flags=None, requested=1657797481701 (1657797481701 @ 0) for mcu = 13800.553873 [10/06/2026 14:38:20] (13814.979014175 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:32:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=93.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 93.42706727981567. Used = 93.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 397.6643628, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.7930010933043732, Elapsed = 00:06:37.6733533, TimeTotal = 06:09:39.2030571, Remaining = 06:03:01.5297038, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:10.1538184, WeightTotalEstimate = 01:03:10.1538184, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.6940666, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:37.6733533, HeatingEstimate = 01:03:22.3356372, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.2555096, WeightEstimate = 01:03:10.1538184 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7930010933043732;StartedAtUtc;00:06:37.6733533;06:09:39.2030571;06:03:01.5297038;False;232;0;0;00:00:00;01:03:10.1538184;01:03:10.1538184;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.6940666;00:00:00;02:00:00;00:06:37.6733533;01:03:22.3356372;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.2555096 [PrintingService.cs@1918] -06/13/2026 19:32:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=79.42857142857143,printChamber1=79.42857142857143,printChamber2=79.42857142857143,printChamber3=79.42857142857143,printChamber4=79.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=94.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 94.42706727981567. Used = 94.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 405.1640154, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.826813088817476, Elapsed = 00:06:45.1725766, TimeTotal = 06:09:39.2026278, Remaining = 06:02:54.0300512, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:10.1538184, WeightTotalEstimate = 01:03:10.1538184, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.6940666, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:45.1725766, HeatingEstimate = 01:03:14.8359846, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.2555096, WeightEstimate = 01:03:10.1538184 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.826813088817476;StartedAtUtc;00:06:45.1725766;06:09:39.2026278;06:02:54.0300512;False;232;0;0;00:00:00;01:03:10.1538184;01:03:10.1538184;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.6940666;00:00:00;02:00:00;00:06:45.1725766;01:03:14.8359846;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.2555096 [PrintingService.cs@1918] -06/13/2026 19:32:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=80.42857142857143,printChamber1=80.42857142857143,printChamber2=80.42857142857143,printChamber3=80.42857142857143,printChamber4=80.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3857147. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:32:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:32:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:32:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0541647 ~ 5.99 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:32:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/13/2026 19:32:18 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/13/2026 19:32:18 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/13/2026 19:32:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/13/2026 19:32:19 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/13/2026 19:32:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/13/2026 19:32:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=45.42857142857143,powderChamber1=45.42857142857143,powderChamber2=45.42857142857143,powderChamber3=45.42857142857143,powderChamber4=45.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=95.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 95.42706727981567. Used = 95.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 412.6648445, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.8606312848607018, Elapsed = 00:06:52.6731786, TimeTotal = 06:09:39.2024007, Remaining = 06:02:46.5292221, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:10.1538184, WeightTotalEstimate = 01:03:10.1538184, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.6940666, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:52.6731786, HeatingEstimate = 01:03:07.3351555, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.2555096, WeightEstimate = 01:03:10.1538184 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8606312848607018;StartedAtUtc;00:06:52.6731786;06:09:39.2024007;06:02:46.5292221;False;232;0;0;00:00:00;01:03:10.1538184;01:03:10.1538184;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.6940666;00:00:00;02:00:00;00:06:52.6731786;01:03:07.3351555;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.2555096 [PrintingService.cs@1918] -06/13/2026 19:32:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=81.42857142857143,printChamber1=81.42857142857143,printChamber2=81.42857142857143,printChamber3=81.42857142857143,printChamber4=81.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=46.42857142857143,powderChamber1=46.42857142857143,powderChamber2=46.42857142857143,powderChamber3=46.42857142857143,powderChamber4=46.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=96.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 96.42706727981567. Used = 96.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 420.1676089, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.8944620290804963, Elapsed = 00:07:00.1765799, TimeTotal = 06:09:39.2030376, Remaining = 06:02:39.0264577, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:10.1538184, WeightTotalEstimate = 01:03:10.1538184, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.6940666, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:00.1765799, HeatingEstimate = 01:02:59.8323911, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.2555096, WeightEstimate = 01:03:10.1538184 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8944620290804963;StartedAtUtc;00:07:00.1765799;06:09:39.2030376;06:02:39.0264577;False;232;0;0;00:00:00;01:03:10.1538184;01:03:10.1538184;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.6940666;00:00:00;02:00:00;00:07:00.1765799;01:02:59.8323911;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.2555096 [PrintingService.cs@1918] -06/13/2026 19:32:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=82.42857142857143,printChamber1=82.42857142857143,printChamber2=82.42857142857143,printChamber3=82.42857142857143,printChamber4=82.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=98.38540649414062, Elapsed=00:00:30.1955357 [ControlledHeating.cs@486] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 98.38540649414062 after 00:00:30.1977658 [ControlledHeating.cs@493] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3160577. SinceCollect=00:01:00.7236978. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13313, gen1=1254, gen2=163, LatencyMode=Interactive, FreeMemory=5827936256, Live=465932504, HeapSizeBytes=479042032, FragmentedBytes=13393992, TotalCommittedBytes=487358464, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634218. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0672318. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0768697. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:32:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1659009002929 (1659009002929 @ 0) for mcu = 13810.650009 [10/06/2026 14:38:30] (13825.075024408334 sec) to 1661459748467 (from now=1661339748467, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1659009002929 (1659009002929 @ 0) for mcu = 13810.650009 [10/06/2026 14:38:30] (13825.075024408334 sec) to 1661459748467 (from external timestamp, flags=None, requested=1661459748467 (1661459748467 @ 0) for mcu = 13831.073147 [10/06/2026 14:38:51] (13845.497903891666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1659009002929 (1659009002929 @ 0) for mcu = 13810.650009 [10/06/2026 14:38:30] (13825.075024408334 sec) to 1661459748467 (from external timestamp, flags=None, requested=1661459748467 (1661459748467 @ 0) for mcu = 13831.073147 [10/06/2026 14:38:51] (13845.497903891666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:32:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:32:35 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=33 that are outside of set tolerance 10 for current step target 46.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:32:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=97.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 97.42706727981567. Used = 97.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 427.6681489, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.9282820063570325, Elapsed = 00:07:07.6775904, TimeTotal = 06:09:39.2035081, Remaining = 06:02:31.5259177, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:10.1538184, WeightTotalEstimate = 01:03:10.1538184, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.6940666, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:07.6775904, HeatingEstimate = 01:02:52.3318511, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:37.2555096, WeightEstimate = 01:03:10.1538184 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9282820063570325;StartedAtUtc;00:07:07.6775904;06:09:39.2035081;06:02:31.5259177;False;232;0;0;00:00:00;01:03:10.1538184;01:03:10.1538184;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.6940666;00:00:00;02:00:00;00:07:07.6775904;01:02:52.3318511;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:37.2555096 [PrintingService.cs@1918] -06/13/2026 19:32:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=83.42857142857143,printChamber1=83.42857142857143,printChamber2=83.42857142857143,printChamber3=83.42857142857143,printChamber4=83.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351447, estimate=49.28454459975444 for layer 9, Z=0.901 [PrintingService.cs@1524] -06/13/2026 19:32:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 9, island count 7 [PrintingService.cs@1569] -06/13/2026 19:32:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 10, start=0, count=232, Z=1.001 [PrintingService.cs@1518] -06/13/2026 19:32:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:32:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=98.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 98.42706727981567. Used = 98.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 435.1708035, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.9620059923354183, Elapsed = 00:07:15.1863848, TimeTotal = 06:09:40.6858134, Remaining = 06:02:25.4994286, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.6299839, WeightTotalEstimate = 01:03:11.6299839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:18.1702321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:15.1863848, HeatingEstimate = 01:02:44.8291965, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.7316751, WeightEstimate = 01:03:11.6299839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9620059923354183;StartedAtUtc;00:07:15.1863848;06:09:40.6858134;06:02:25.4994286;False;232;0;0;00:00:00;01:03:11.6299839;01:03:11.6299839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:18.1702321;00:00:00;02:00:00;00:07:15.1863848;01:02:44.8291965;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.7316751 [PrintingService.cs@1918] -06/13/2026 19:32:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=84.42857142857143,printChamber1=84.42857142857143,printChamber2=84.42857142857143,printChamber3=84.42857142857143,printChamber4=84.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1862417. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:32:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:32:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:32:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 84.42857 with temperature 81.25 [HeaterCheck.cs@67] -06/13/2026 19:32:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=99.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.42706727981567. Used = 99.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 442.6768538, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 1.9958144609006234, Elapsed = 00:07:22.6851904, TimeTotal = 06:09:40.6785687, Remaining = 06:02:17.9933783, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.6299839, WeightTotalEstimate = 01:03:11.6299839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:18.1702321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:22.6851904, HeatingEstimate = 01:02:37.3231462, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.7316751, WeightEstimate = 01:03:11.6299839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9958144609006234;StartedAtUtc;00:07:22.6851904;06:09:40.6785687;06:02:17.9933783;False;232;0;0;00:00:00;01:03:11.6299839;01:03:11.6299839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:18.1702321;00:00:00;02:00:00;00:07:22.6851904;01:02:37.3231462;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.7316751 [PrintingService.cs@1918] -06/13/2026 19:32:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=85.42857142857143,printChamber1=85.42857142857143,printChamber2=85.42857142857143,printChamber3=85.42857142857143,printChamber4=85.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:32:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=100.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:32:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.42706727981567. Used = 100.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:32:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 450.1780186, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.029633063165164, Elapsed = 00:07:30.1863865, TimeTotal = 06:09:40.6786000, Remaining = 06:02:10.4922135, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.6299839, WeightTotalEstimate = 01:03:11.6299839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:18.1702321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:30.1863865, HeatingEstimate = 01:02:29.8219814, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.7316751, WeightEstimate = 01:03:11.6299839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:32:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.029633063165164;StartedAtUtc;00:07:30.1863865;06:09:40.6786000;06:02:10.4922135;False;232;0;0;00:00:00;01:03:11.6299839;01:03:11.6299839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:18.1702321;00:00:00;02:00:00;00:07:30.1863865;01:02:29.8219814;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.7316751 [PrintingService.cs@1918] -06/13/2026 19:32:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=86.42857142857143,printChamber1=86.42857142857143,printChamber2=86.42857142857143,printChamber3=86.42857142857143,printChamber4=86.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=100.59764099121094, Elapsed=00:00:30.5207522 [ControlledHeating.cs@486] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 100.59764099121094 after 00:00:30.5208111 [ControlledHeating.cs@493] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2046679. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631664. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2709216. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2828197. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:33:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1662671269695 (1662671269695 @ 0) for mcu = 13841.169276 [10/06/2026 14:39:01] (13855.593914125 sec) to 1665084454351 (from now=1664964454351, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1662671269695 (1662671269695 @ 0) for mcu = 13841.169276 [10/06/2026 14:39:01] (13855.593914125 sec) to 1665084454351 (from external timestamp, flags=None, requested=1665084454351 (1665084454351 @ 0) for mcu = 13861.279395 [10/06/2026 14:39:21] (13875.703786258333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1662671269695 (1662671269695 @ 0) for mcu = 13841.169276 [10/06/2026 14:39:01] (13855.593914125 sec) to 1665084454351 (from external timestamp, flags=None, requested=1665084454351 (1665084454351 @ 0) for mcu = 13861.279395 [10/06/2026 14:39:21] (13875.703786258333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:33:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=101.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.42706727981567. Used = 101.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 457.678921, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.0634503732623055, Elapsed = 00:07:37.6872955, TimeTotal = 06:09:40.6786066, Remaining = 06:02:02.9913111, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.6299839, WeightTotalEstimate = 01:03:11.6299839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:18.1702321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:37.6872955, HeatingEstimate = 01:02:22.3210790, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.7316751, WeightEstimate = 01:03:11.6299839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0634503732623055;StartedAtUtc;00:07:37.6872955;06:09:40.6786066;06:02:02.9913111;False;232;0;0;00:00:00;01:03:11.6299839;01:03:11.6299839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:18.1702321;00:00:00;02:00:00;00:07:37.6872955;01:02:22.3210790;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.7316751 [PrintingService.cs@1918] -06/13/2026 19:33:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=87.42857142857143,printChamber1=87.42857142857143,printChamber2=87.42857142857143,printChamber3=87.42857142857143,printChamber4=87.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 46.42857 with temperature 44.25 [HeaterCheck.cs@67] -06/13/2026 19:33:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 46.42857 with temperature 34 [HeaterCheck.cs@111] -06/13/2026 19:33:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=102.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.42706727981567. Used = 102.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 465.1821618, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.097278484059777, Elapsed = 00:07:45.1906014, TimeTotal = 06:09:40.6786717, Remaining = 06:01:55.4880703, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.6299839, WeightTotalEstimate = 01:03:11.6299839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:18.1702321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:45.1906014, HeatingEstimate = 01:02:14.8178382, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.7316751, WeightEstimate = 01:03:11.6299839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.097278484059777;StartedAtUtc;00:07:45.1906014;06:09:40.6786717;06:01:55.4880703;False;232;0;0;00:00:00;01:03:11.6299839;01:03:11.6299839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:18.1702321;00:00:00;02:00:00;00:07:45.1906014;01:02:14.8178382;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.7316751 [PrintingService.cs@1918] -06/13/2026 19:33:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=88.42857142857143,printChamber1=88.42857142857143,printChamber2=88.42857142857143,printChamber3=88.42857142857143,printChamber4=88.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 88.42857 with temperature 83.10713958740234 [HeaterCheck.cs@88] -06/13/2026 19:33:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9748514. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3916828. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:33:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:33:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:33:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0722304 ~ 5.99 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:33:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 88.42857 with temperature 83.46428680419922 [HeaterCheck.cs@67] -06/13/2026 19:33:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 88.42857 with temperature 83.57142639160156 [HeaterCheck.cs@67] -06/13/2026 19:33:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=103.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.42706727981567. Used = 103.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 472.6863319, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.1311100360067616, Elapsed = 00:07:52.6946670, TimeTotal = 06:09:40.6785672, Remaining = 06:01:47.9839002, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.6299839, WeightTotalEstimate = 01:03:11.6299839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:18.1702321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:52.6946670, HeatingEstimate = 01:02:07.3136681, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.7316751, WeightEstimate = 01:03:11.6299839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1311100360067616;StartedAtUtc;00:07:52.6946670;06:09:40.6785672;06:01:47.9839002;False;232;0;0;00:00:00;01:03:11.6299839;01:03:11.6299839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:18.1702321;00:00:00;02:00:00;00:07:52.6946670;01:02:07.3136681;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.7316751 [PrintingService.cs@1918] -06/13/2026 19:33:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=89.42857142857143,printChamber1=89.42857142857143,printChamber2=89.42857142857143,printChamber3=89.42857142857143,printChamber4=89.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 89.42857 with temperature 83.75 [HeaterCheck.cs@88] -06/13/2026 19:33:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 89.42857 with temperature 84.75 [HeaterCheck.cs@67] -06/13/2026 19:33:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 89.42857 with temperature 85 [HeaterCheck.cs@67] -06/13/2026 19:33:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262873, estimate=49.72116922429642 for layer 10, Z=1.001 [PrintingService.cs@1524] -06/13/2026 19:33:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 10, island count 7 [PrintingService.cs@1569] -06/13/2026 19:33:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 11, start=0, count=232, Z=1.1010001 [PrintingService.cs@1518] -06/13/2026 19:33:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:33:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 89.42857 with temperature 84.42857360839844 [HeaterCheck.cs@67] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=104.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.42706727981567. Used = 104.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 480.1889366, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.162147766778439, Elapsed = 00:08:00.1973302, TimeTotal = 06:10:09.2743881, Remaining = 06:02:09.0770579, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:40.2257463, WeightTotalEstimate = 01:03:40.2257463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.7659945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:00.1973302, HeatingEstimate = 01:01:59.8110634, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.3274375, WeightEstimate = 01:03:40.2257463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.162147766778439;StartedAtUtc;00:08:00.1973302;06:10:09.2743881;06:02:09.0770579;False;232;0;0;00:00:00;01:03:40.2257463;01:03:40.2257463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.7659945;00:00:00;02:00:00;00:08:00.1973302;01:01:59.8110634;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.3274375 [PrintingService.cs@1918] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=90.42857142857143,printChamber1=90.42857142857143,printChamber2=90.42857142857143,printChamber3=90.42857142857143,printChamber4=90.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 90.42857 with temperature 85.17857360839844 [HeaterCheck.cs@88] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 90.42857 with temperature 84.5 [HeaterCheck.cs@88] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 90.42857 with temperature 84.75 [HeaterCheck.cs@88] -06/13/2026 19:33:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 90.42857 with temperature 85.42857360839844 [HeaterCheck.cs@67] -06/13/2026 19:33:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 90.42857 with temperature 85.75 [HeaterCheck.cs@67] -06/13/2026 19:33:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 90.42857 with temperature 85.5 [HeaterCheck.cs@67] -06/13/2026 19:33:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 90.42857 with temperature 86 [HeaterCheck.cs@67] -06/13/2026 19:33:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=104.30564880371094, Elapsed=00:00:30.2046454 [ControlledHeating.cs@486] -06/13/2026 19:33:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 104.30564880371094 after 00:00:30.2049559 [ControlledHeating.cs@493] -06/13/2026 19:33:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3317534. SinceCollect=00:01:00.7416375. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13411, gen1=1261, gen2=164, LatencyMode=Interactive, FreeMemory=5816549376, Live=465957360, HeapSizeBytes=478946232, FragmentedBytes=13383344, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628195. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0665320. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0781328. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:33:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1666295975579 (1666295975579 @ 0) for mcu = 13871.375492 [10/06/2026 14:39:31] (13885.799796491667 sec) to 1668749068222 (from now=1668629068222, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1666295975579 (1666295975579 @ 0) for mcu = 13871.375492 [10/06/2026 14:39:31] (13885.799796491667 sec) to 1668749068222 (from external timestamp, flags=None, requested=1668749068222 (1668749068222 @ 0) for mcu = 13891.818168 [10/06/2026 14:39:51] (13906.242235183334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1666295975579 (1666295975579 @ 0) for mcu = 13871.375492 [10/06/2026 14:39:31] (13885.799796491667 sec) to 1668749068222 (from external timestamp, flags=None, requested=1668749068222 (1668749068222 @ 0) for mcu = 13891.818168 [10/06/2026 14:39:51] (13906.242235183334 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 90.42857 with temperature 85.5 [HeaterCheck.cs@67] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 46.42857 with temperature 42.25 [HeaterCheck.cs@67] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 90.42857 with temperature 85.5 [HeaterCheck.cs@67] -06/13/2026 19:33:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 90.42857 with temperature 85.5 [HeaterCheck.cs@67] -06/13/2026 19:33:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=105.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.42706727981567. Used = 105.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 90.42857 with temperature 85.5 [HeaterCheck.cs@67] -06/13/2026 19:33:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 90.42857 with temperature 85.5 [HeaterCheck.cs@67] -06/13/2026 19:33:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 487.6883134, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.195914391882349, Elapsed = 00:08:07.6966514, TimeTotal = 06:10:09.2743325, Remaining = 06:02:01.5776811, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:40.2257463, WeightTotalEstimate = 01:03:40.2257463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.7659945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:07.6966514, HeatingEstimate = 01:01:52.3116866, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.3274375, WeightEstimate = 01:03:40.2257463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.195914391882349;StartedAtUtc;00:08:07.6966514;06:10:09.2743325;06:02:01.5776811;False;232;0;0;00:00:00;01:03:40.2257463;01:03:40.2257463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.7659945;00:00:00;02:00:00;00:08:07.6966514;01:01:52.3116866;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.3274375 [PrintingService.cs@1918] -06/13/2026 19:33:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=91.42857142857143,printChamber1=91.42857142857143,printChamber2=91.42857142857143,printChamber3=91.42857142857143,printChamber4=91.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 91.42857 with temperature 85.5 [HeaterCheck.cs@88] -06/13/2026 19:33:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 91.42857 with temperature 85.5 [HeaterCheck.cs@88] -06/13/2026 19:33:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 91.42857 with temperature 86.75 [HeaterCheck.cs@67] -06/13/2026 19:33:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 91.42857 with temperature 86.75 [HeaterCheck.cs@67] -06/13/2026 19:33:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 91.42857 with temperature 86.5 [HeaterCheck.cs@67] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=106.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.42706727981567. Used = 106.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 91.42857 with temperature 86.5 [HeaterCheck.cs@67] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 495.1888322, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.2296867367238047, Elapsed = 00:08:15.1972458, TimeTotal = 06:10:09.2744081, Remaining = 06:01:54.0771623, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:40.2257463, WeightTotalEstimate = 01:03:40.2257463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.7659945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:15.1972458, HeatingEstimate = 01:01:44.8111678, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.3274375, WeightEstimate = 01:03:40.2257463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2296867367238047;StartedAtUtc;00:08:15.1972458;06:10:09.2744081;06:01:54.0771623;False;232;0;0;00:00:00;01:03:40.2257463;01:03:40.2257463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.7659945;00:00:00;02:00:00;00:08:15.1972458;01:01:44.8111678;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.3274375 [PrintingService.cs@1918] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=92.42857142857143,printChamber1=92.42857142857143,printChamber2=92.42857142857143,printChamber3=92.42857142857143,printChamber4=92.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 92.42857 with temperature 86.25 [HeaterCheck.cs@88] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 92.42857 with temperature 87 [HeaterCheck.cs@88] -06/13/2026 19:33:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 46.42857 with temperature 42.5 [HeaterCheck.cs@67] -06/13/2026 19:33:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 92.42857 with temperature 87.75 [HeaterCheck.cs@67] -06/13/2026 19:33:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9996256. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1894930. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:33:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:33:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:33:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 46.42857 with temperature 42.75 [HeaterCheck.cs@67] -06/13/2026 19:33:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 92.42857 with temperature 87.5 [HeaterCheck.cs@67] -06/13/2026 19:33:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 92.42857 with temperature 87.5 [HeaterCheck.cs@67] -06/13/2026 19:33:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 92.42857 with temperature 88 [HeaterCheck.cs@67] -06/13/2026 19:33:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=107.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.42706727981567. Used = 107.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 502.6886788, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.2634553989662822, Elapsed = 00:08:22.6970190, TimeTotal = 06:10:09.2743347, Remaining = 06:01:46.5773157, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:40.2257463, WeightTotalEstimate = 01:03:40.2257463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.7659945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:22.6970190, HeatingEstimate = 01:01:37.3113212, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.3274375, WeightEstimate = 01:03:40.2257463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2634553989662822;StartedAtUtc;00:08:22.6970190;06:10:09.2743347;06:01:46.5773157;False;232;0;0;00:00:00;01:03:40.2257463;01:03:40.2257463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.7659945;00:00:00;02:00:00;00:08:22.6970190;01:01:37.3113212;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.3274375 [PrintingService.cs@1918] -06/13/2026 19:33:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=93.42857142857143,printChamber1=93.42857142857143,printChamber2=93.42857142857143,printChamber3=93.42857142857143,printChamber4=93.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 93.42857 with temperature 88.25 [HeaterCheck.cs@88] -06/13/2026 19:33:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=47.42857142857143,powderChamber1=47.42857142857143,powderChamber2=47.42857142857143,powderChamber3=47.42857142857143,powderChamber4=47.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 93.42857 with temperature 88.5 [HeaterCheck.cs@67] -06/13/2026 19:33:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 93.42857 with temperature 88.5 [HeaterCheck.cs@67] -06/13/2026 19:33:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 43 [HeaterCheck.cs@67] -06/13/2026 19:33:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.5 [HeaterCheck.cs@67] -06/13/2026 19:33:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 93.42857 with temperature 88.5 [HeaterCheck.cs@67] -06/13/2026 19:33:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 43 [HeaterCheck.cs@67] -06/13/2026 19:33:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 93.42857 with temperature 89 [HeaterCheck.cs@67] -06/13/2026 19:33:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 93.42857 with temperature 90.25 [HeaterCheck.cs@67] -06/13/2026 19:33:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.5 [HeaterCheck.cs@67] -06/13/2026 19:33:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 43.25 [HeaterCheck.cs@67] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=108.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.42706727981567. Used = 108.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 510.193532, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.2972468985723515, Elapsed = 00:08:30.2018657, TimeTotal = 06:10:09.2743282, Remaining = 06:01:39.0724625, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:40.2257463, WeightTotalEstimate = 01:03:40.2257463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.7659945, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:30.2018657, HeatingEstimate = 01:01:29.8064680, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:07.3274375, WeightEstimate = 01:03:40.2257463 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2972468985723515;StartedAtUtc;00:08:30.2018657;06:10:09.2743282;06:01:39.0724625;False;232;0;0;00:00:00;01:03:40.2257463;01:03:40.2257463;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.7659945;00:00:00;02:00:00;00:08:30.2018657;01:01:29.8064680;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:07.3274375 [PrintingService.cs@1918] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=94.42857142857143,printChamber1=94.42857142857143,printChamber2=94.42857142857143,printChamber3=94.42857142857143,printChamber4=94.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.5 [HeaterCheck.cs@67] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 94.42857 with temperature 89 [HeaterCheck.cs@88] -06/13/2026 19:33:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.42857 with temperature 89.75 [HeaterCheck.cs@67] -06/13/2026 19:33:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.5 [HeaterCheck.cs@67] -06/13/2026 19:33:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.42857 with temperature 89.5 [HeaterCheck.cs@67] -06/13/2026 19:33:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=37.25 that are outside of set tolerance 10 for current step target 47.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:33:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.5 [HeaterCheck.cs@67] -06/13/2026 19:34:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.42857 with temperature 89.5 [HeaterCheck.cs@67] -06/13/2026 19:34:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.75 [HeaterCheck.cs@67] -06/13/2026 19:34:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.42857 with temperature 89.5 [HeaterCheck.cs@67] -06/13/2026 19:34:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 44 [HeaterCheck.cs@67] -06/13/2026 19:34:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.42857 with temperature 89.75 [HeaterCheck.cs@67] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=107.99000549316406, Elapsed=00:00:30.5562927 [ControlledHeating.cs@486] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 107.99000549316406 after 00:00:30.5563872 [ControlledHeating.cs@493] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2188617. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0622319. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2891651. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3047199. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:34:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1669960589450 (1669960589450 @ 0) for mcu = 13901.914347 [10/06/2026 14:40:01] (13916.338245416666 sec) to 1672376194705 (from now=1672256194705, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1669960589450 (1669960589450 @ 0) for mcu = 13901.914347 [10/06/2026 14:40:01] (13916.338245416666 sec) to 1672376194705 (from external timestamp, flags=None, requested=1672376194705 (1672376194705 @ 0) for mcu = 13922.044640 [10/06/2026 14:40:21] (13936.468289208333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1669960589450 (1669960589450 @ 0) for mcu = 13901.914347 [10/06/2026 14:40:01] (13916.338245416666 sec) to 1672376194705 (from external timestamp, flags=None, requested=1672376194705 (1672376194705 @ 0) for mcu = 13922.044640 [10/06/2026 14:40:21] (13936.468289208333 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 43 [HeaterCheck.cs@67] -06/13/2026 19:34:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.42857 with temperature 90 [HeaterCheck.cs@67] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351470, estimate=49.34821230247278 for layer 11, Z=1.1010001 [PrintingService.cs@1524] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.5 [HeaterCheck.cs@67] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 11, island count 7 [PrintingService.cs@1569] -06/13/2026 19:34:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 12, start=0, count=232, Z=1.2010001 [PrintingService.cs@1518] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.42857 with temperature 91 [HeaterCheck.cs@67] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=109.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.42706727981567. Used = 109.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 517.6928589, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.330857352354449, Elapsed = 00:08:37.7026975, TimeTotal = 06:10:10.8271438, Remaining = 06:01:33.1244463, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.7770570, WeightTotalEstimate = 01:03:41.7770570, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:48.3173052, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:37.7026975, HeatingEstimate = 01:01:22.3071411, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.8787482, WeightEstimate = 01:03:41.7770570 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:38. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.330857352354449;StartedAtUtc;00:08:37.7026975;06:10:10.8271438;06:01:33.1244463;False;232;0;0;00:00:00;01:03:41.7770570;01:03:41.7770570;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:48.3173052;00:00:00;02:00:00;00:08:37.7026975;01:01:22.3071411;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.8787482 [PrintingService.cs@1918] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=95.42857142857143,printChamber1=95.42857142857143,printChamber2=95.42857142857143,printChamber3=95.42857142857143,printChamber4=95.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 95.42857 with temperature 90.07142639160156 [HeaterCheck.cs@88] -06/13/2026 19:34:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 43.25 [HeaterCheck.cs@67] -06/13/2026 19:34:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 95.42857 with temperature 91 [HeaterCheck.cs@67] -06/13/2026 19:34:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 95.42857 with temperature 91 [HeaterCheck.cs@67] -06/13/2026 19:34:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 42.75 [HeaterCheck.cs@67] -06/13/2026 19:34:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.42857 with temperature 44.25 [HeaterCheck.cs@67] -06/13/2026 19:34:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=48.42857142857143,powderChamber1=48.42857142857143,powderChamber2=48.42857142857143,powderChamber3=48.42857142857143,powderChamber4=48.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 95.42857 with temperature 90.5 [HeaterCheck.cs@67] -06/13/2026 19:34:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=110.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.42706727981567. Used = 110.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 525.1968352, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.364636201337764, Elapsed = 00:08:45.2052250, TimeTotal = 06:10:10.8256950, Remaining = 06:01:25.6204700, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.7770570, WeightTotalEstimate = 01:03:41.7770570, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:48.3173052, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:45.2052250, HeatingEstimate = 01:01:14.8031648, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.8787482, WeightEstimate = 01:03:41.7770570 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:38. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:34:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.364636201337764;StartedAtUtc;00:08:45.2052250;06:10:10.8256950;06:01:25.6204700;False;232;0;0;00:00:00;01:03:41.7770570;01:03:41.7770570;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:48.3173052;00:00:00;02:00:00;00:08:45.2052250;01:01:14.8031648;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.8787482 [PrintingService.cs@1918] -06/13/2026 19:34:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=96.42857142857143,printChamber1=96.42857142857143,printChamber2=96.42857142857143,printChamber3=96.42857142857143,printChamber4=96.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 96.42857 with temperature 90.75 [HeaterCheck.cs@88] -06/13/2026 19:34:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 48.42857 with temperature 35.5 [HeaterCheck.cs@111] -06/13/2026 19:34:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9921899. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4147664. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:34:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:34:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:34:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0240725 ~ 5.98 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:34:17 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=37.75 that are outside of set tolerance 10 for current step target 48.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:34:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=111.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.42706727981567. Used = 111.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 532.7120335, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.398471714995808, Elapsed = 00:08:52.7203707, TimeTotal = 06:10:10.8256424, Remaining = 06:01:18.1052717, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.7770570, WeightTotalEstimate = 01:03:41.7770570, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:48.3173052, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:52.7203707, HeatingEstimate = 01:01:07.2879665, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.8787482, WeightEstimate = 01:03:41.7770570 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:38. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:34:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.398471714995808;StartedAtUtc;00:08:52.7203707;06:10:10.8256424;06:01:18.1052717;False;232;0;0;00:00:00;01:03:41.7770570;01:03:41.7770570;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:48.3173052;00:00:00;02:00:00;00:08:52.7203707;01:01:07.2879665;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.8787482 [PrintingService.cs@1918] -06/13/2026 19:34:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=97.42857142857143,printChamber1=97.42857142857143,printChamber2=97.42857142857143,printChamber3=97.42857142857143,printChamber4=97.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.42857 with temperature 43.75 [HeaterCheck.cs@67] -06/13/2026 19:34:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.42857 with temperature 44.25 [HeaterCheck.cs@67] -06/13/2026 19:34:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=112.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.42706727981567. Used = 112.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=86.92857360839844 that are outside of set tolerance 10 for current step target 97.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:34:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.42857 with temperature 44.25 [HeaterCheck.cs@67] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=112.08010864257812, Elapsed=00:00:30.2102962 [ControlledHeating.cs@486] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 112.08010864257812 after 00:00:30.2106640 [ControlledHeating.cs@493] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3167929. SinceCollect=00:01:00.7461755. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13509, gen1=1268, gen2=165, LatencyMode=Interactive, FreeMemory=5836521472, Live=465831240, HeapSizeBytes=479042920, FragmentedBytes=13520392, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629315. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0646649. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0754775. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:34:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1673587715933 (1673587715933 @ 0) for mcu = 13932.140790 [10/06/2026 14:40:32] (13946.564299441667 sec) to 1676038157372 (from now=1675918157372, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1673587715933 (1673587715933 @ 0) for mcu = 13932.140790 [10/06/2026 14:40:32] (13946.564299441667 sec) to 1676038157372 (from external timestamp, flags=None, requested=1676038157372 (1676038157372 @ 0) for mcu = 13952.561389 [10/06/2026 14:40:52] (13966.984644766666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1673587715933 (1673587715933 @ 0) for mcu = 13932.140790 [10/06/2026 14:40:32] (13946.564299441667 sec) to 1676038157372 (from external timestamp, flags=None, requested=1676038157372 (1676038157372 @ 0) for mcu = 13952.561389 [10/06/2026 14:40:52] (13966.984644766666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:34:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:34:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=113.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.42706727981567. Used = 113.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.42857 with temperature 43.5 [HeaterCheck.cs@67] -06/13/2026 19:34:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=49.42857142857143,powderChamber1=49.42857142857143,powderChamber2=49.42857142857143,powderChamber3=49.42857142857143,powderChamber4=49.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 49.42857 with temperature 44.75 [HeaterCheck.cs@67] -06/13/2026 19:34:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=114.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.42706727981567. Used = 114.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 556.2148261, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.504288564809277, Elapsed = 00:09:16.2231668, TimeTotal = 06:10:10.8256459, Remaining = 06:00:54.6024791, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.7770570, WeightTotalEstimate = 01:03:41.7770570, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:48.3173052, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:16.2231668, HeatingEstimate = 01:00:43.7851739, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.8787482, WeightEstimate = 01:03:41.7770570 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:35:38. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:34:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.504288564809277;StartedAtUtc;00:09:16.2231668;06:10:10.8256459;06:00:54.6024791;False;232;0;0;00:00:00;01:03:41.7770570;01:03:41.7770570;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:48.3173052;00:00:00;02:00:00;00:09:16.2231668;01:00:43.7851739;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.8787482 [PrintingService.cs@1918] -06/13/2026 19:34:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=98.42857142857143,printChamber1=98.42857142857143,printChamber2=98.42857142857143,printChamber3=98.42857142857143,printChamber4=98.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9958116. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1835922. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:34:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:34:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:34:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=50.42857142857143,powderChamber1=50.42857142857143,powderChamber2=50.42857142857143,powderChamber3=50.42857142857143,powderChamber4=50.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] approaching new target of 50.42857 with temperature 45.25 [HeaterCheck.cs@88] -06/13/2026 19:34:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 50.42857 with temperature 46 [HeaterCheck.cs@67] -06/13/2026 19:34:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262866, estimate=49.254905281275214 for layer 12, Z=1.2010001 [PrintingService.cs@1524] -06/13/2026 19:34:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 12, island count 7 [PrintingService.cs@1569] -06/13/2026 19:34:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 13, start=0, count=232, Z=1.3010001 [PrintingService.cs@1518] -06/13/2026 19:34:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:34:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=115.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.42706727981567. Used = 115.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 50.42857 with temperature 46 [HeaterCheck.cs@67] -06/13/2026 19:34:51 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=87.75 that are outside of set tolerance 10 for current step target 98.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:34:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 564.7238469, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.53517008930435, Elapsed = 00:09:24.7322294, TimeTotal = 06:11:15.9108662, Remaining = 06:01:51.1786368, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.8622355, WeightTotalEstimate = 01:04:46.8622355, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.4024837, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:24.7322294, HeatingEstimate = 01:00:35.2761531, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.9639267, WeightEstimate = 01:04:46.8622355 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:36:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:34:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.53517008930435;StartedAtUtc;00:09:24.7322294;06:11:15.9108662;06:01:51.1786368;False;232;0;0;00:00:00;01:04:46.8622355;01:04:46.8622355;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.4024837;00:00:00;02:00:00;00:09:24.7322294;01:00:35.2761531;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.9639267 [PrintingService.cs@1918] -06/13/2026 19:34:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=99.42857142857143,printChamber1=99.42857142857143,printChamber2=99.42857142857143,printChamber3=99.42857142857143,printChamber4=99.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:34:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=36.25 that are outside of set tolerance 10 for current step target 50.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:34:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=116.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:34:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.42706727981567. Used = 116.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:34:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 99.42857 with temperature 94.5 [HeaterCheck.cs@67] -06/13/2026 19:35:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 572.2260077, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.568848319523655, Elapsed = 00:09:32.2343612, TimeTotal = 06:11:15.9108372, Remaining = 06:01:43.6764760, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.8622355, WeightTotalEstimate = 01:04:46.8622355, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.4024837, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:32.2343612, HeatingEstimate = 01:00:27.7739923, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.9639267, WeightEstimate = 01:04:46.8622355 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:36:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:35:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.568848319523655;StartedAtUtc;00:09:32.2343612;06:11:15.9108372;06:01:43.6764760;False;232;0;0;00:00:00;01:04:46.8622355;01:04:46.8622355;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.4024837;00:00:00;02:00:00;00:09:32.2343612;01:00:27.7739923;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.9639267 [PrintingService.cs@1918] -06/13/2026 19:35:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=100.42857142857143,printChamber1=100.42857142857143,printChamber2=100.42857142857143,printChamber3=100.42857142857143,printChamber4=100.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 100.42857 with temperature 95.39286041259766 [HeaterCheck.cs@88] -06/13/2026 19:35:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 100.42857 with temperature 95.46428680419922 [HeaterCheck.cs@67] -06/13/2026 19:35:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 50.42857 with temperature 46.75 [HeaterCheck.cs@67] -06/13/2026 19:35:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.42857 with temperature 46.25 [HeaterCheck.cs@67] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=115.88269805908203, Elapsed=00:00:30.5173758 [ControlledHeating.cs@486] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 115.88269805908203 after 00:00:30.5174563 [ControlledHeating.cs@493] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1993810. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632743. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2663601. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2807508. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:35:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1677249678600 (1677249678600 @ 0) for mcu = 13962.657547 [10/06/2026 14:41:02] (13977.080655 sec) to 1679662818897 (from now=1679542818897, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1677249678600 (1677249678600 @ 0) for mcu = 13962.657547 [10/06/2026 14:41:02] (13977.080655 sec) to 1679662818897 (from external timestamp, flags=None, requested=1679662818897 (1679662818897 @ 0) for mcu = 13982.767306 [10/06/2026 14:41:22] (13997.190157475 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1677249678600 (1677249678600 @ 0) for mcu = 13962.657547 [10/06/2026 14:41:02] (13977.080655 sec) to 1679662818897 (from external timestamp, flags=None, requested=1679662818897 (1679662818897 @ 0) for mcu = 13982.767306 [10/06/2026 14:41:22] (13997.190157475 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=117.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.42706727981567. Used = 117.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 579.7255752, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.6025149544535218, Elapsed = 00:09:39.7339103, TimeTotal = 06:11:15.9108188, Remaining = 06:01:36.1769085, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.8622355, WeightTotalEstimate = 01:04:46.8622355, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.4024837, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:39.7339103, HeatingEstimate = 01:00:20.2744248, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.9639267, WeightEstimate = 01:04:46.8622355 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:36:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:35:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.6025149544535218;StartedAtUtc;00:09:39.7339103;06:11:15.9108188;06:01:36.1769085;False;232;0;0;00:00:00;01:04:46.8622355;01:04:46.8622355;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.4024837;00:00:00;02:00:00;00:09:39.7339103;01:00:20.2744248;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.9639267 [PrintingService.cs@1918] -06/13/2026 19:35:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=101.42857142857143,printChamber1=101.42857142857143,printChamber2=101.42857142857143,printChamber3=101.42857142857143,printChamber4=101.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 101.42857 with temperature 96 [HeaterCheck.cs@88] -06/13/2026 19:35:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=118.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.42706727981567. Used = 118.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 101.42857 with temperature 97 [HeaterCheck.cs@67] -06/13/2026 19:35:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 587.2295757, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.6362018312202147, Elapsed = 00:09:47.2379705, TimeTotal = 06:11:15.9108785, Remaining = 06:01:28.6729080, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.8622355, WeightTotalEstimate = 01:04:46.8622355, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.4024837, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:47.2379705, HeatingEstimate = 01:00:12.7704243, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.9639267, WeightEstimate = 01:04:46.8622355 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:36:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:35:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.6362018312202147;StartedAtUtc;00:09:47.2379705;06:11:15.9108785;06:01:28.6729080;False;232;0;0;00:00:00;01:04:46.8622355;01:04:46.8622355;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.4024837;00:00:00;02:00:00;00:09:47.2379705;01:00:12.7704243;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.9639267 [PrintingService.cs@1918] -06/13/2026 19:35:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=102.42857142857143,printChamber1=102.42857142857143,printChamber2=102.42857142857143,printChamber3=102.42857142857143,printChamber4=102.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0335091 ~ 6 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:35:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 50.42857 with temperature 47 [HeaterCheck.cs@67] -06/13/2026 19:35:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9936248. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3881847. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:35:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:35:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:35:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.42857 with temperature 46.25 [HeaterCheck.cs@67] -06/13/2026 19:35:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=119.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.42706727981567. Used = 119.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 594.7284972, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.6698654713358416, Elapsed = 00:09:54.7368519, TimeTotal = 06:11:15.9108384, Remaining = 06:01:21.1739865, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.8622355, WeightTotalEstimate = 01:04:46.8622355, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.4024837, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:54.7368519, HeatingEstimate = 01:00:05.2715028, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.9639267, WeightEstimate = 01:04:46.8622355 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:36:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:35:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.6698654713358416;StartedAtUtc;00:09:54.7368519;06:11:15.9108384;06:01:21.1739865;False;232;0;0;00:00:00;01:04:46.8622355;01:04:46.8622355;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.4024837;00:00:00;02:00:00;00:09:54.7368519;01:00:05.2715028;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.9639267 [PrintingService.cs@1918] -06/13/2026 19:35:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=103.42857142857143,printChamber1=103.42857142857143,printChamber2=103.42857142857143,printChamber3=103.42857142857143,printChamber4=103.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.42857 with temperature 46.25 [HeaterCheck.cs@67] -06/13/2026 19:35:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=120.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.42706727981567. Used = 120.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 602.2287959, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.7035354027938547, Elapsed = 00:10:02.2371354, TimeTotal = 06:11:15.9108232, Remaining = 06:01:13.6736878, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.8622355, WeightTotalEstimate = 01:04:46.8622355, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.4024837, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:02.2371354, HeatingEstimate = 00:59:57.7712041, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.9639267, WeightEstimate = 01:04:46.8622355 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:36:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:35:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7035354027938547;StartedAtUtc;00:10:02.2371354;06:11:15.9108232;06:01:13.6736878;False;232;0;0;00:00:00;01:04:46.8622355;01:04:46.8622355;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.4024837;00:00:00;02:00:00;00:10:02.2371354;00:59:57.7712041;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.9639267 [PrintingService.cs@1918] -06/13/2026 19:35:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=104.42857142857143,printChamber1=104.42857142857143,printChamber2=104.42857142857143,printChamber3=104.42857142857143,printChamber4=104.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351566, estimate=49.195319649262295 for layer 13, Z=1.3010001 [PrintingService.cs@1524] -06/13/2026 19:35:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 13, island count 7 [PrintingService.cs@1569] -06/13/2026 19:35:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 14, start=0, count=232, Z=1.401 [PrintingService.cs@1518] -06/13/2026 19:35:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:35:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.42857 with temperature 46.75 [HeaterCheck.cs@67] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=120.21165466308594, Elapsed=00:00:30.2038552 [ControlledHeating.cs@486] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 120.21165466308594 after 00:00:30.2087357 [ControlledHeating.cs@493] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3025406. SinceCollect=00:01:00.7138665. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13607, gen1=1276, gen2=166, LatencyMode=Interactive, FreeMemory=5798264832, Live=465716152, HeapSizeBytes=478885384, FragmentedBytes=13514080, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (3 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630848. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0677942. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0813312. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:35:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1680874340125 (1680874340125 @ 0) for mcu = 13992.863414 [10/06/2026 14:41:32] (14007.286167708333 sec) to 1683324457179 (from now=1683204457179, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1680874340125 (1680874340125 @ 0) for mcu = 13992.863414 [10/06/2026 14:41:32] (14007.286167708333 sec) to 1683324457179 (from external timestamp, flags=None, requested=1683324457179 (1683324457179 @ 0) for mcu = 14013.281305 [10/06/2026 14:41:53] (14027.703809825 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1680874340125 (1680874340125 @ 0) for mcu = 13992.863414 [10/06/2026 14:41:32] (14007.286167708333 sec) to 1683324457179 (from external timestamp, flags=None, requested=1683324457179 (1683324457179 @ 0) for mcu = 14013.281305 [10/06/2026 14:41:53] (14027.703809825 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=121.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.42706727981567. Used = 121.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 104.42857 with temperature 99.46428680419922 [HeaterCheck.cs@67] -06/13/2026 19:35:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 609.7313789, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 2.7369008880197723, Elapsed = 00:10:09.7433260, TimeTotal = 06:11:18.6045585, Remaining = 06:01:08.8612325, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:49.5523632, WeightTotalEstimate = 01:04:49.5523632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:56.0926114, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:09.7433260, HeatingEstimate = 00:59:50.2686211, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:16.6540544, WeightEstimate = 01:04:49.5523632 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:36:46. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:35:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7369008880197723;StartedAtUtc;00:10:09.7433260;06:11:18.6045585;06:01:08.8612325;False;232;0;0;00:00:00;01:04:49.5523632;01:04:49.5523632;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:56.0926114;00:00:00;02:00:00;00:10:09.7433260;00:59:50.2686211;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:16.6540544 [PrintingService.cs@1918] -06/13/2026 19:35:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=105.42857142857143,printChamber1=105.42857142857143,printChamber2=105.42857142857143,printChamber3=105.42857142857143,printChamber4=105.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 50.42857 with temperature 37.25 [HeaterCheck.cs@111] -06/13/2026 19:35:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.42857 with temperature 100.5 [HeaterCheck.cs@67] -06/13/2026 19:35:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=51.42857142857143,powderChamber1=51.42857142857143,powderChamber2=51.42857142857143,powderChamber3=51.42857142857143,powderChamber4=51.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=122.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.42706727981567. Used = 122.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 105.42857 with temperature 100.5 [HeaterCheck.cs@67] -06/13/2026 19:35:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 51.42857 with temperature 46.25 [HeaterCheck.cs@88] -06/13/2026 19:35:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.42857 with temperature 46.5 [HeaterCheck.cs@67] -06/13/2026 19:35:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.42857 with temperature 46.5 [HeaterCheck.cs@67] -06/13/2026 19:35:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 105.42857 with temperature 100.5 [HeaterCheck.cs@67] -06/13/2026 19:35:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 105.42857 with temperature 100.75 [HeaterCheck.cs@67] -06/13/2026 19:35:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=95 that are outside of set tolerance 10 for current step target 105.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:35:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.42857 with temperature 46.5 [HeaterCheck.cs@67] -06/13/2026 19:35:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 51.42857 with temperature 43 [HeaterCheck.cs@111] -06/13/2026 19:35:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.42857 with temperature 100.5 [HeaterCheck.cs@67] -06/13/2026 19:35:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 105.42857 with temperature 101 [HeaterCheck.cs@67] -06/13/2026 19:35:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.42857 with temperature 46.75 [HeaterCheck.cs@67] -06/13/2026 19:35:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9925195. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1895848. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:35:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:35:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:35:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.42857 with temperature 46.5 [HeaterCheck.cs@67] -06/13/2026 19:35:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.42857 with temperature 46.75 [HeaterCheck.cs@67] -06/13/2026 19:35:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.42857 with temperature 46.5 [HeaterCheck.cs@67] -06/13/2026 19:35:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=52.42857142857143,powderChamber1=52.42857142857143,powderChamber2=52.42857142857143,powderChamber3=52.42857142857143,powderChamber4=52.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:35:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=123.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.42706727981567. Used = 123.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:35:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:35:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:35:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:35:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:35:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:35:58 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=37 that are outside of set tolerance 10 for current step target 52.42857142857143 and final target 145 [ControlledHeating.cs@205] -06/13/2026 19:35:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=124.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:35:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.42706727981567. Used = 124.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:35:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=125.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.42706727981567. Used = 125.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=124.65327453613281, Elapsed=00:00:30.5067622 [ControlledHeating.cs@486] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 124.65327453613281 after 00:00:30.5072993 [ControlledHeating.cs@493] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2026138. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0614346. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2720820. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2885724. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:36:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1684535978407 (1684535978407 @ 0) for mcu = 14023.377468 [10/06/2026 14:42:03] (14037.799820058333 sec) to 1686949250946 (from now=1686829250946, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1684535978407 (1684535978407 @ 0) for mcu = 14023.377468 [10/06/2026 14:42:03] (14037.799820058333 sec) to 1686949250946 (from external timestamp, flags=None, requested=1686949250946 (1686949250946 @ 0) for mcu = 14043.488328 [10/06/2026 14:42:23] (14057.91042455 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1684535978407 (1684535978407 @ 0) for mcu = 14023.377468 [10/06/2026 14:42:03] (14037.799820058333 sec) to 1686949250946 (from external timestamp, flags=None, requested=1686949250946 (1686949250946 @ 0) for mcu = 14043.488328 [10/06/2026 14:42:23] (14057.91042455 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:36:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262854, estimate=49.44336328656827 for layer 14, Z=1.401 [PrintingService.cs@1524] -06/13/2026 19:36:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 14, island count 7 [PrintingService.cs@1569] -06/13/2026 19:36:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 15, start=0, count=232, Z=1.501 [PrintingService.cs@1518] -06/13/2026 19:36:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:36:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48 [HeaterCheck.cs@67] -06/13/2026 19:36:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:36:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=126.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.42706727981567. Used = 126.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 105.42857 with temperature 95 [HeaterCheck.cs@111] -06/13/2026 19:36:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0584834 ~ 5.99 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:36:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48.75 [HeaterCheck.cs@67] -06/13/2026 19:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9705684. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3994365. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:36:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:36:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:36:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:36:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=127.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.42706727981567. Used = 127.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=128.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.42706727981567. Used = 128.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 105.42857 with temperature 100.75 [HeaterCheck.cs@67] -06/13/2026 19:36:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 105.42857 with temperature 100.5 [HeaterCheck.cs@67] -06/13/2026 19:36:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48.25 [HeaterCheck.cs@67] -06/13/2026 19:36:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 105.42857 with temperature 100.5 [HeaterCheck.cs@67] -06/13/2026 19:36:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=129.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.42706727981567. Used = 129.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=128.51116943359375, Elapsed=00:00:30.2191394 [ControlledHeating.cs@486] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 128.51116943359375 after 00:00:30.2192369 [ControlledHeating.cs@493] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3137246. SinceCollect=00:01:00.7351449. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13703, gen1=1283, gen2=167, LatencyMode=Interactive, FreeMemory=5813501952, Live=465360568, HeapSizeBytes=478593000, FragmentedBytes=13525432, TotalCommittedBytes=487374848, PinnedObjectsCount=25, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632975. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0668228. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0802791. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:36:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1688160772174 (1688160772174 @ 0) for mcu = 14053.584507 [10/06/2026 14:42:33] (14068.006434783334 sec) to 1690612571417 (from now=1690492571417, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1688160772174 (1688160772174 @ 0) for mcu = 14053.584507 [10/06/2026 14:42:33] (14068.006434783334 sec) to 1690612571417 (from external timestamp, flags=None, requested=1690612571417 (1690612571417 @ 0) for mcu = 14074.016442 [10/06/2026 14:42:53] (14088.438095141666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1688160772174 (1688160772174 @ 0) for mcu = 14053.584507 [10/06/2026 14:42:33] (14068.006434783334 sec) to 1690612571417 (from external timestamp, flags=None, requested=1690612571417 (1690612571417 @ 0) for mcu = 14074.016442 [10/06/2026 14:42:53] (14088.438095141666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:36:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 105.42857 with temperature 94.75 [HeaterCheck.cs@111] -06/13/2026 19:36:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 105.42857 with temperature 101.75 [HeaterCheck.cs@67] -06/13/2026 19:36:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 105.42857 with temperature 100.5 [HeaterCheck.cs@67] -06/13/2026 19:36:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 105.42857 with temperature 100.75 [HeaterCheck.cs@67] -06/13/2026 19:36:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:36:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 52.42857 with temperature 38 [HeaterCheck.cs@111] -06/13/2026 19:36:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=130.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 130.42706727981567. Used = 130.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351655, estimate=49.17949990331996 for layer 15, Z=1.501 [PrintingService.cs@1524] -06/13/2026 19:36:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 15, island count 7 [PrintingService.cs@1569] -06/13/2026 19:36:44 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 16, start=0, count=232, Z=1.6010001 [PrintingService.cs@1518] -06/13/2026 19:36:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:36:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9841467. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1931417. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:36:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:36:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:36:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:36:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 681.2816774, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.053694019386636, Elapsed = 00:11:21.2900124, TimeTotal = 06:11:50.3561809, Remaining = 06:00:29.0661685, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.3075977, WeightTotalEstimate = 01:05:21.3075977, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.8478459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:21.2900124, HeatingEstimate = 00:58:38.7183226, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.4092889, WeightEstimate = 01:05:21.3075977 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:18. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:36:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.053694019386636;StartedAtUtc;00:11:21.2900124;06:11:50.3561809;06:00:29.0661685;False;232;0;0;00:00:00;01:05:21.3075977;01:05:21.3075977;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.8478459;00:00:00;02:00:00;00:11:21.2900124;00:58:38.7183226;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.4092889 [PrintingService.cs@1918] -06/13/2026 19:36:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=106.42857142857143,printChamber1=106.42857142857143,printChamber2=106.42857142857143,printChamber3=106.42857142857143,printChamber4=106.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:36:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=131.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 131.42706727981567. Used = 131.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=95.5 that are outside of set tolerance 10 for current step target 106.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:36:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 689.7862843, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.0918135668027933, Elapsed = 00:11:29.7946192, TimeTotal = 06:11:50.3561808, Remaining = 06:00:20.5615616, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.3075977, WeightTotalEstimate = 01:05:21.3075977, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.8478459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:29.7946192, HeatingEstimate = 00:58:30.2137157, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.4092889, WeightEstimate = 01:05:21.3075977 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:18. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:36:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0918135668027933;StartedAtUtc;00:11:29.7946192;06:11:50.3561808;06:00:20.5615616;False;232;0;0;00:00:00;01:05:21.3075977;01:05:21.3075977;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.8478459;00:00:00;02:00:00;00:11:29.7946192;00:58:30.2137157;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.4092889 [PrintingService.cs@1918] -06/13/2026 19:36:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=107.42857142857143,printChamber1=107.42857142857143,printChamber2=107.42857142857143,printChamber3=107.42857142857143,printChamber4=107.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:36:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 107.42857 with temperature 101.75 [HeaterCheck.cs@88] -06/13/2026 19:36:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=132.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:36:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 132.42706727981567. Used = 132.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:36:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 107.42857 with temperature 102.42857360839844 [HeaterCheck.cs@67] -06/13/2026 19:36:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:36:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48.25 [HeaterCheck.cs@67] -06/13/2026 19:37:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 697.2849937, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.125424451286159, Elapsed = 00:11:37.2933272, TimeTotal = 06:11:50.3561794, Remaining = 06:00:13.0628522, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.3075977, WeightTotalEstimate = 01:05:21.3075977, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.8478459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:37.2933272, HeatingEstimate = 00:58:22.7150063, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.4092889, WeightEstimate = 01:05:21.3075977 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:18. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:37:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.125424451286159;StartedAtUtc;00:11:37.2933272;06:11:50.3561794;06:00:13.0628522;False;232;0;0;00:00:00;01:05:21.3075977;01:05:21.3075977;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.8478459;00:00:00;02:00:00;00:11:37.2933272;00:58:22.7150063;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.4092889 [PrintingService.cs@1918] -06/13/2026 19:37:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=108.42857142857143,printChamber1=108.42857142857143,printChamber2=108.42857142857143,printChamber3=108.42857142857143,printChamber4=108.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:37:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=133.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 133.42706727981567. Used = 133.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=133.14553833007812, Elapsed=00:00:30.5293888 [ControlledHeating.cs@486] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 133.14553833007812 after 00:00:30.5294774 [ControlledHeating.cs@493] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2194707. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630769. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2847490. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3036857. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:37:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1691824092645 (1691824092645 @ 0) for mcu = 14084.112552 [10/06/2026 14:43:04] (14098.534105375 sec) to 1694239326075 (from now=1694119326075, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1691824092645 (1691824092645 @ 0) for mcu = 14084.112552 [10/06/2026 14:43:04] (14098.534105375 sec) to 1694239326075 (from external timestamp, flags=None, requested=1694239326075 (1694239326075 @ 0) for mcu = 14104.239753 [10/06/2026 14:43:24] (14118.661050625 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1691824092645 (1691824092645 @ 0) for mcu = 14084.112552 [10/06/2026 14:43:04] (14098.534105375 sec) to 1694239326075 (from external timestamp, flags=None, requested=1694239326075 (1694239326075 @ 0) for mcu = 14104.239753 [10/06/2026 14:43:24] (14118.661050625 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:37:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 108.42857 with temperature 103.75 [HeaterCheck.cs@67] -06/13/2026 19:37:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 704.7843416, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.159038556209258, Elapsed = 00:11:44.7927563, TimeTotal = 06:11:50.3562606, Remaining = 06:00:05.5635043, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.3075977, WeightTotalEstimate = 01:05:21.3075977, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.8478459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:44.7927563, HeatingEstimate = 00:58:15.2156584, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.4092889, WeightEstimate = 01:05:21.3075977 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:18. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:37:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.159038556209258;StartedAtUtc;00:11:44.7927563;06:11:50.3562606;06:00:05.5635043;False;232;0;0;00:00:00;01:05:21.3075977;01:05:21.3075977;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.8478459;00:00:00;02:00:00;00:11:44.7927563;00:58:15.2156584;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.4092889 [PrintingService.cs@1918] -06/13/2026 19:37:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=109.42857142857143,printChamber1=109.42857142857143,printChamber2=109.42857142857143,printChamber3=109.42857142857143,printChamber4=109.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:37:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=134.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 134.42706727981567. Used = 134.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:15 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0446173 ~ 6 samples/sec, 62 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:37:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 52.42857 with temperature 42 [HeaterCheck.cs@111] -06/13/2026 19:37:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9546108. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4091412. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:37:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:37:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:37:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/13/2026 19:37:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 109.42857 with temperature 104.75 [HeaterCheck.cs@67] -06/13/2026 19:37:18 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/13/2026 19:37:18 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/13/2026 19:37:18 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/13/2026 19:37:19 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/13/2026 19:37:19 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/13/2026 19:37:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 712.2855246, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.1926602136519504, Elapsed = 00:11:52.2938655, TimeTotal = 06:11:50.3561868, Remaining = 05:59:58.0623213, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:21.3075977, WeightTotalEstimate = 01:05:21.3075977, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:27.8478459, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:52.2938655, HeatingEstimate = 00:58:07.7144754, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:48.4092889, WeightEstimate = 01:05:21.3075977 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:18. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:37:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1926602136519504;StartedAtUtc;00:11:52.2938655;06:11:50.3561868;05:59:58.0623213;False;232;0;0;00:00:00;01:05:21.3075977;01:05:21.3075977;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:27.8478459;00:00:00;02:00:00;00:11:52.2938655;00:58:07.7144754;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:48.4092889 [PrintingService.cs@1918] -06/13/2026 19:37:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=110.42857142857143,printChamber1=110.42857142857143,printChamber2=110.42857142857143,printChamber3=110.42857142857143,printChamber4=110.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:37:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=135.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 135.42706727981567. Used = 135.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262861, estimate=49.163865579170974 for layer 16, Z=1.6010001 [PrintingService.cs@1524] -06/13/2026 19:37:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 16, island count 7 [PrintingService.cs@1569] -06/13/2026 19:37:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 17, start=0, count=232, Z=1.7010001 [PrintingService.cs@1518] -06/13/2026 19:37:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:37:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 110.42857 with temperature 105.75 [HeaterCheck.cs@67] -06/13/2026 19:37:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 719.7848677, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.221174087572455, Elapsed = 00:11:59.7932944, TimeTotal = 06:12:25.6812588, Remaining = 06:00:25.8879644, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.6325839, WeightTotalEstimate = 01:05:56.6325839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.1728321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:59.7932944, HeatingEstimate = 00:58:00.2151323, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:23.7342751, WeightEstimate = 01:05:56.6325839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:37:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.221174087572455;StartedAtUtc;00:11:59.7932944;06:12:25.6812588;06:00:25.8879644;False;232;0;0;00:00:00;01:05:56.6325839;01:05:56.6325839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.1728321;00:00:00;02:00:00;00:11:59.7932944;00:58:00.2151323;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:23.7342751 [PrintingService.cs@1918] -06/13/2026 19:37:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=111.42857142857143,printChamber1=111.42857142857143,printChamber2=111.42857142857143,printChamber3=111.42857142857143,printChamber4=111.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:37:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 111.42857 with temperature 106.75 [HeaterCheck.cs@67] -06/13/2026 19:37:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=136.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 136.42706727981567. Used = 136.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 111.42857 with temperature 106.5 [HeaterCheck.cs@67] -06/13/2026 19:37:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 727.2845483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.254735782913507, Elapsed = 00:12:07.2928808, TimeTotal = 06:12:25.6811646, Remaining = 06:00:18.3882838, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.6325839, WeightTotalEstimate = 01:05:56.6325839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.1728321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:12:07.2928808, HeatingEstimate = 00:57:52.7154517, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:23.7342751, WeightEstimate = 01:05:56.6325839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:37:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.254735782913507;StartedAtUtc;00:12:07.2928808;06:12:25.6811646;06:00:18.3882838;False;232;0;0;00:00:00;01:05:56.6325839;01:05:56.6325839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.1728321;00:00:00;02:00:00;00:12:07.2928808;00:57:52.7154517;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:23.7342751 [PrintingService.cs@1918] -06/13/2026 19:37:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=112.42857142857143,printChamber1=112.42857142857143,printChamber2=112.42857142857143,printChamber3=112.42857142857143,printChamber4=112.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:37:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 112.42857 with temperature 106.82142639160156 [HeaterCheck.cs@88] -06/13/2026 19:37:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=137.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 137.42706727981567. Used = 137.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=136.1783905029297, Elapsed=00:00:30.2180402 [ControlledHeating.cs@486] -06/13/2026 19:37:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 136.1783905029297 after 00:00:30.2181120 [ControlledHeating.cs@493] -06/13/2026 19:37:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3181496. SinceCollect=00:01:00.7520500. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13802, gen1=1291, gen2=168, LatencyMode=Interactive, FreeMemory=5805244416, Live=465738808, HeapSizeBytes=478589208, FragmentedBytes=13128904, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (7 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634013. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0702643. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0812844. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:37:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1695450847303 (1695450847303 @ 0) for mcu = 14114.335900 [10/06/2026 14:43:34] (14128.757060858334 sec) to 1697902863494 (from now=1697782863494, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1695450847303 (1695450847303 @ 0) for mcu = 14114.335900 [10/06/2026 14:43:34] (14128.757060858334 sec) to 1697902863494 (from external timestamp, flags=None, requested=1697902863494 (1697902863494 @ 0) for mcu = 14134.769629 [10/06/2026 14:43:54] (14149.190529116666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1695450847303 (1695450847303 @ 0) for mcu = 14114.335900 [10/06/2026 14:43:34] (14128.757060858334 sec) to 1697902863494 (from external timestamp, flags=None, requested=1697902863494 (1697902863494 @ 0) for mcu = 14134.769629 [10/06/2026 14:43:54] (14149.190529116666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:37:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:37:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 734.785315, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.288302755336423, Elapsed = 00:12:14.7936495, TimeTotal = 06:12:25.6811666, Remaining = 06:00:10.8875171, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.6325839, WeightTotalEstimate = 01:05:56.6325839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.1728321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:12:14.7936495, HeatingEstimate = 00:57:45.2146850, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:23.7342751, WeightEstimate = 01:05:56.6325839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:37:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.288302755336423;StartedAtUtc;00:12:14.7936495;06:12:25.6811666;06:00:10.8875171;False;232;0;0;00:00:00;01:05:56.6325839;01:05:56.6325839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.1728321;00:00:00;02:00:00;00:12:14.7936495;00:57:45.2146850;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:23.7342751 [PrintingService.cs@1918] -06/13/2026 19:37:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=113.42857142857143,printChamber1=113.42857142857143,printChamber2=113.42857142857143,printChamber3=113.42857142857143,printChamber4=113.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:37:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 113.42857 with temperature 107.5 [HeaterCheck.cs@88] -06/13/2026 19:37:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=138.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 138.42706727981567. Used = 138.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 113.42857 with temperature 108.75 [HeaterCheck.cs@67] -06/13/2026 19:37:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:37:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 113.42857 with temperature 108.5 [HeaterCheck.cs@67] -06/13/2026 19:37:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9837642. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1901817. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:37:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:37:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:37:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 52.42857 with temperature 39 [HeaterCheck.cs@111] -06/13/2026 19:37:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 742.2850428, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.321865087185744, Elapsed = 00:12:22.2933813, TimeTotal = 06:12:25.6811706, Remaining = 06:00:03.3877893, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.6325839, WeightTotalEstimate = 01:05:56.6325839, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.1728321, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:12:22.2933813, HeatingEstimate = 00:57:37.7149572, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:23.7342751, WeightEstimate = 01:05:56.6325839 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:37:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.321865087185744;StartedAtUtc;00:12:22.2933813;06:12:25.6811706;06:00:03.3877893;False;232;0;0;00:00:00;01:05:56.6325839;01:05:56.6325839;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.1728321;00:00:00;02:00:00;00:12:22.2933813;00:57:37.7149572;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:23.7342751 [PrintingService.cs@1918] -06/13/2026 19:37:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=114.42857142857143,printChamber1=114.42857142857143,printChamber2=114.42857142857143,printChamber3=114.42857142857143,printChamber4=114.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:37:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=139.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 139.42706727981567. Used = 139.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48 [HeaterCheck.cs@67] -06/13/2026 19:37:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:37:57 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=103.96428680419922 that are outside of set tolerance 10 for current step target 114.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:37:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=140.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:37:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 140.42706727981567. Used = 140.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:37:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48.25 [HeaterCheck.cs@67] -06/13/2026 19:38:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48 [HeaterCheck.cs@67] -06/13/2026 19:38:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=141.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 141.42706727981567. Used = 141.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=140.35394287109375, Elapsed=00:00:30.5180640 [ControlledHeating.cs@486] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 140.35394287109375 after 00:00:30.5181229 [ControlledHeating.cs@493] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2031619. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630905. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2673144. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2765933. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:38:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1699114384722 (1699114384722 @ 0) for mcu = 14144.865801 [10/06/2026 14:44:04] (14159.28653935 sec) to 1701526227203 (from now=1701406227203, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1699114384722 (1699114384722 @ 0) for mcu = 14144.865801 [10/06/2026 14:44:04] (14159.28653935 sec) to 1701526227203 (from external timestamp, flags=None, requested=1701526227203 (1701526227203 @ 0) for mcu = 14164.964759 [10/06/2026 14:44:24] (14179.385226691667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1699114384722 (1699114384722 @ 0) for mcu = 14144.865801 [10/06/2026 14:44:04] (14159.28653935 sec) to 1701526227203 (from external timestamp, flags=None, requested=1701526227203 (1701526227203 @ 0) for mcu = 14164.964759 [10/06/2026 14:44:24] (14179.385226691667 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:38:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.75 [HeaterCheck.cs@67] -06/13/2026 19:38:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351663, estimate=49.40085306719309 for layer 17, Z=1.7010001 [PrintingService.cs@1524] -06/13/2026 19:38:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 17, island count 7 [PrintingService.cs@1569] -06/13/2026 19:38:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 18, start=0, count=232, Z=1.8010001 [PrintingService.cs@1518] -06/13/2026 19:38:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:38:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 114.42857 with temperature 109.5 [HeaterCheck.cs@67] -06/13/2026 19:38:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.42857 with temperature 48.5 [HeaterCheck.cs@67] -06/13/2026 19:38:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:38:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 114.42857 with temperature 109.5 [HeaterCheck.cs@67] -06/13/2026 19:38:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 114.42857 with temperature 109.75 [HeaterCheck.cs@67] -06/13/2026 19:38:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=142.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 142.42706727981567. Used = 142.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1095591 ~ 5.99 samples/sec, 62 resets, 3 ignored frames) [Mlx90640Camera.cs@313] -06/13/2026 19:38:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9908423. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3814928. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:38:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:38:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:38:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=143.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 143.42706727981567. Used = 143.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 52.42857 with temperature 41.5 [HeaterCheck.cs@111] -06/13/2026 19:38:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 114.42857 with temperature 109.5 [HeaterCheck.cs@67] -06/13/2026 19:38:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 114.42857 with temperature 109.5 [HeaterCheck.cs@67] -06/13/2026 19:38:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 114.42857 with temperature 110.25 [HeaterCheck.cs@67] -06/13/2026 19:38:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 114.42857 with temperature 109.75 [HeaterCheck.cs@67] -06/13/2026 19:38:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=144.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 144.42706727981567. Used = 144.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 114.42857 with temperature 109.75 [HeaterCheck.cs@67] -06/13/2026 19:38:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48 [HeaterCheck.cs@67] -06/13/2026 19:38:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 114.42857 with temperature 110.75 [HeaterCheck.cs@67] -06/13/2026 19:38:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 784.7938964, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.51185421670071, Elapsed = 00:13:04.8022323, TimeTotal = 06:12:27.2326547, Remaining = 05:59:22.4304224, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.1840706, WeightTotalEstimate = 01:05:58.1840706, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.7243188, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:13:04.8022323, HeatingEstimate = 00:56:55.2061036, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.2857618, WeightEstimate = 01:05:58.1840706 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:38:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.51185421670071;StartedAtUtc;00:13:04.8022323;06:12:27.2326547;05:59:22.4304224;False;232;0;0;00:00:00;01:05:58.1840706;01:05:58.1840706;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.7243188;00:00:00;02:00:00;00:13:04.8022323;00:56:55.2061036;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.2857618 [PrintingService.cs@1918] -06/13/2026 19:38:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=115.42857142857143,printChamber1=115.42857142857143,printChamber2=115.42857142857143,printChamber3=115.42857142857143,printChamber4=115.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:38:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 115.42857 with temperature 110 [HeaterCheck.cs@88] -06/13/2026 19:38:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 115.42857 with temperature 110.5 [HeaterCheck.cs@67] -06/13/2026 19:38:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=145.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 145.42706727981567. Used = 145.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 115.42857 with temperature 110.5 [HeaterCheck.cs@67] -06/13/2026 19:38:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 52.42857 with temperature 48.25 [HeaterCheck.cs@67] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=145.27685546875, Elapsed=00:00:30.1983796 [ControlledHeating.cs@486] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 145.27685546875 after 00:00:30.1985085 [ControlledHeating.cs@493] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (122 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3128433. SinceCollect=00:01:00.7146362. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=13897, gen1=1297, gen2=169, LatencyMode=Interactive, FreeMemory=5815369728, Live=465806992, HeapSizeBytes=478748368, FragmentedBytes=13237072, TotalCommittedBytes=487374848, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630657. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0665794. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0776017. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:38:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 358.270205251574, Z2 = 450 } } [LayerClient.cs@969] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 1702737748431 (1702737748431 @ 0) for mcu = 14175.060839 [10/06/2026 14:44:35] (14189.481236925 sec) to 1705188518993 (from now=1705068518993, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 1702737748431 (1702737748431 @ 0) for mcu = 14175.060839 [10/06/2026 14:44:35] (14189.481236925 sec) to 1705188518993 (from external timestamp, flags=None, requested=1705188518993 (1705188518993 @ 0) for mcu = 14195.484181 [10/06/2026 14:44:55] (14209.904324941666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 1702737748431 (1702737748431 @ 0) for mcu = 14175.060839 [10/06/2026 14:44:35] (14189.481236925 sec) to 1705188518993 (from external timestamp, flags=None, requested=1705188518993 (1705188518993 @ 0) for mcu = 14195.484181 [10/06/2026 14:44:55] (14209.904324941666 sec), advance=0) [McuStepper.cs@843] -06/13/2026 19:38:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:38:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 115.42857 with temperature 110.75 [HeaterCheck.cs@67] -06/13/2026 19:38:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=104.71428680419922 that are outside of set tolerance 10 for current step target 115.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:38:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 793.2937396, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.549889650266975, Elapsed = 00:13:13.3021000, TimeTotal = 06:12:27.2326792, Remaining = 05:59:13.9305792, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.1840706, WeightTotalEstimate = 01:05:58.1840706, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.7243188, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:13:13.3021000, HeatingEstimate = 00:56:46.7062604, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.2857618, WeightEstimate = 01:05:58.1840706 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:38:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.549889650266975;StartedAtUtc;00:13:13.3021000;06:12:27.2326792;05:59:13.9305792;False;232;0;0;00:00:00;01:05:58.1840706;01:05:58.1840706;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.7243188;00:00:00;02:00:00;00:13:13.3021000;00:56:46.7062604;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.2857618 [PrintingService.cs@1918] -06/13/2026 19:38:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=116.42857142857143,printChamber1=116.42857142857143,printChamber2=116.42857142857143,printChamber3=116.42857142857143,printChamber4=116.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:38:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 116.42857 with temperature 111 [HeaterCheck.cs@88] -06/13/2026 19:38:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=146.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 146.42706727981567. Used = 146.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.42857 with temperature 47.5 [HeaterCheck.cs@67] -06/13/2026 19:38:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.42857 with temperature 111.75 [HeaterCheck.cs@67] -06/13/2026 19:38:48 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=106.03571319580078 that are outside of set tolerance 10 for current step target 116.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:38:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9784883. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1869461. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/13/2026 19:38:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/13/2026 19:38:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/13/2026 19:38:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262849, estimate=49.39121281649048 for layer 18, Z=1.8010001 [PrintingService.cs@1524] -06/13/2026 19:38:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 18, island count 7 [PrintingService.cs@1569] -06/13/2026 19:38:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 19, start=0, count=232, Z=1.901 [PrintingService.cs@1518] -06/13/2026 19:38:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/13/2026 19:38:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 801.7982482, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 13/06/2026 18:25:26, Progress = 3.5879475141321664, Elapsed = 00:13:21.8066176, TimeTotal = 06:12:27.2225957, Remaining = 05:59:05.4159781, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.1739781, WeightTotalEstimate = 01:05:58.1739781, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.7142263, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:13:21.8066176, HeatingEstimate = 00:56:38.2017518, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 176, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.2756693, WeightEstimate = 01:05:58.1739781 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/14/2026 00:37:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/13/2026 19:38:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.5879475141321664;StartedAtUtc;00:13:21.8066176;06:12:27.2225957;05:59:05.4159781;False;232;0;0;00:00:00;01:05:58.1739781;01:05:58.1739781;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.7142263;00:00:00;02:00:00;00:13:21.8066176;00:56:38.2017518;00:00:07.5000000;00:00:15;176;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.2756693 [PrintingService.cs@1918] -06/13/2026 19:38:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=117.42857142857143,printChamber1=117.42857142857143,printChamber2=117.42857142857143,printChamber3=117.42857142857143,printChamber4=117.42857142857143 [ControlledHeating.cs@169] -06/13/2026 19:38:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 117.42857 with temperature 112 [HeaterCheck.cs@88] -06/13/2026 19:38:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=147.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 147.42706727981567. Used = 147.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 52.42857 with temperature 39.25 [HeaterCheck.cs@111] -06/13/2026 19:38:57 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=107.25 that are outside of set tolerance 10 for current step target 117.42857142857143 and final target 172 [ControlledHeating.cs@205] -06/13/2026 19:38:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=148.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:38:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.42857 with temperature 112.5 [HeaterCheck.cs@67] -06/13/2026 19:38:58 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 148.42706727981567. Used = 148.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:38:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.42857 with temperature 113 [HeaterCheck.cs@67] -06/13/2026 19:39:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 117.42857 with temperature 112.75 [HeaterCheck.cs@67] -06/13/2026 19:39:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.42857 with temperature 112.5 [HeaterCheck.cs@67] -06/13/2026 19:39:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 117.42857 with temperature 112.5 [HeaterCheck.cs@67] -06/13/2026 19:39:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=149.42706727981567 [ControlledHeating.cs@169] -06/13/2026 19:39:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 149.42706727981567. Used = 149.42706727981567 [SoftAnalysisSurfaceHeater.cs@881] -06/13/2026 19:39:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 117.42857 with temperature 112.46428680419922 [HeaterCheck.cs@67] -06/13/2026 19:39:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=149.45053100585938, Elapsed=00:00:30.5178127 [ControlledHeating.cs@486] -06/13/2026 19:39:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 149.45053100585938 after 00:00:30.5179130 [ControlledHeating.cs@493] -06/13/2026 19:39:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/13/2026 19:39:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2016390. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 03:19:34 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5887955973178, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:19:34 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5888075979969, flushed existing data. Was Timestamp=0, Now=5887955982502, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:19:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:19:34 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:19:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5885694952245 (5885694952245 @ 0) for mcu = 49033.644996 [27/06/2026 00:44:09] (49047.457935375 sec) to 5888076001107 (from now=5887956001107, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5885694904245 (1506737895486941 @ 8) for mcu = 49033.644596 [27/06/2026 00:44:09] (49047.45753538219 sec) to 5888076001107 (from now=5887956001107, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5885694904245 (1506737895486941 @ 8) for mcu = 49033.644596 [27/06/2026 00:44:09] (49047.45753538219 sec) to 5888076001107 (from now=5887956001107, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.1604626. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531572, LCompressed = 1419218 } [McuMovementClient.cs@491] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:19:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 292 [PrintingService.cs@2118] +06/28/2026 03:19:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.1725386. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531572, LCompressed = 1419218 } [McuMovementClient.cs@491] +06/28/2026 03:19:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 293, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.5678103923127, Elapsed = 06:43:38.4935252, TimeTotal = 12:06:23.6743507, Remaining = 05:22:45.1808255, Incomplete = False, SoftCount = 566, LayerPrintDone = 293, WeightsDone = 293, WeightDone = 02:25:55.3907506, WeightTotal = 03:55:01.6577564, WeightTotalEstimate = 03:55:01.6577564, LayerRecoatElapsed = 02:03:03.9269859, LayerRecoatDelays = 00:20:54, LayerRecoatPrintLayersElapsed = 01:20:02.9327091, LayerRecoatNoDelayAverage = 00:00:14.6648971, StreamingElapsed = 02:23:11.0387543, ObjectLayerOverheadAverageDuration = 00:00:00.0226970, TimeLayers = 07:18:08.5174533, CoolingElapsed = 00:00:00, CoolingEstimate = 02:33:20.9811087, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:16.4366230, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:24.9734565, JobElapsed = 03:43:20.6164076, JobTotal = 06:35:27.1073738, WeightEstimate = 01:29:06.2670058 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:42:20. coolingEstimate=02:33:20.9811087 [PrintingService.cs@1912] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.5678103923127;StartedAtUtc;06:43:38.4935252;12:06:23.6743507;05:22:45.1808255;False;566;293;293;02:25:55.3907506;03:55:01.6577564;03:55:01.6577564;02:03:03.9269859;00:20:54;01:20:02.9327091;00:00:14.6648971;02:23:11.0387543;00:00:00.0226970;07:18:08.5174533;00:00:00;02:33:20.9811087;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:16.4366230;00:00:00;00:04:24.9734565;03:43:20.6164076;06:35:27.1073738 [PrintingService.cs@1918] +06/28/2026 03:19:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 292. PreviewWeight=LayerWeight { Index = 292, FillTotalRelative = 0.1765958174545269, FillMaxRelative = 0.4045001895293018, TimeFromPreview = 33.66655245587082, EnergyDensityIncreaseFactor = 0 }, FillArea=19862.930346884546, PreviewFillRatio=0.4045001895293018, Results=4, StreamingSeconds (preview) = 33.66655245587082, StreamingSeconds (extrapolated) = 34.86177351642832, StreamingSeconds (no overhead) = 1.0289719 (02:23:11.0387543), LayerElapsedSeconds=19.8324975, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 293, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.567815706290006, Elapsed = 06:43:38.4883683, TimeTotal = 12:06:23.6609024, Remaining = 05:22:45.1725341, Incomplete = False, SoftCount = 566, LayerPrintDone = 293, WeightsDone = 293, WeightDone = 02:25:55.3855937, WeightTotal = 03:55:01.6477947, WeightTotalEstimate = 03:55:01.6477948, LayerRecoatElapsed = 02:03:03.9269859, LayerRecoatDelays = 00:20:54, LayerRecoatPrintLayersElapsed = 01:20:02.9327091, LayerRecoatNoDelayAverage = 00:00:14.6648971, StreamingElapsed = 02:23:11.0387543, ObjectLayerOverheadAverageDuration = 00:00:00.0226794, TimeLayers = 07:18:08.5074916, CoolingElapsed = 00:00:00, CoolingEstimate = 02:33:20.9776221, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:16.4366230, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:24.9734565, JobElapsed = 03:43:20.6178055, JobTotal = 06:35:27.0974121, WeightEstimate = 01:29:06.2622011 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:42:20. coolingEstimate=02:33:20.9776221 [PrintingService.cs@1912] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.567815706290006;StartedAtUtc;06:43:38.4883683;12:06:23.6609024;05:22:45.1725341;False;566;293;293;02:25:55.3855937;03:55:01.6477947;03:55:01.6477948;02:03:03.9269859;00:20:54;01:20:02.9327091;00:00:14.6648971;02:23:11.0387543;00:00:00.0226794;07:18:08.5074916;00:00:00;02:33:20.9776221;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:16.4366230;00:00:00;00:04:24.9734565;03:43:20.6178055;06:35:27.0974121 [PrintingService.cs@1918] +06/28/2026 03:19:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 293. PrevPreviewWeight=LayerWeight { Index = 292, FillTotalRelative = 0.1765958174545269, FillMaxRelative = 0.4045001895293018, TimeFromPreview = 33.66655245587082, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4045001895293018, PreviewWeight=LayerWeight { Index = 293, FillTotalRelative = 0.1762424941122381, FillMaxRelative = 0.4023761009804734, TimeFromPreview = 35.07674009970388, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.1904705. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531572, LCompressed = 1419218 } [McuMovementClient.cs@491] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632404. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.2582127. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531572, LCompressed = 1419218 } [McuMovementClient.cs@491] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.2680141. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531572, LCompressed = 1419218 } [McuMovementClient.cs@491] +06/28/2026 03:19:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4077.66160168981, PrevLayerFillRatio=0.4045001895293018: Z1=104.3574141805244, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33218.86062046016, Z2 = 33850 } } [LayerClient.cs@969] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5887050010603 (5887050010603 @ 0) for mcu = 49044.937379 [27/06/2026 00:44:20] (49058.750088358334 sec) to 5888210146624 (from now=5888090146624, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5887050010603 (5887050010603 @ 0) for mcu = 49044.937379 [27/06/2026 00:44:20] (49058.750088358334 sec) to 5888210146624 (from external timestamp, flags=None, requested=5888210146624 (5888210146624 @ 0) for mcu = 49054.605381 [27/06/2026 00:44:30] (49068.41788853333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5887050010603 (5887050010603 @ 0) for mcu = 49044.937379 [27/06/2026 00:44:20] (49058.750088358334 sec) to 5888210146624 (from external timestamp, flags=None, requested=5888210146624 (5888210146624 @ 0) for mcu = 49054.605381 [27/06/2026 00:44:30] (49068.41788853333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:19:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0777934. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.4437463. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531572, LCompressed = 1419218 } [McuMovementClient.cs@491] +06/28/2026 03:19:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:19:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:19:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:19:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 293, Weight=LayerWeight { Index = 293, FillTotalRelative = 0.1762424941122381, FillMaxRelative = 0.4023761009804734, TimeFromPreview = 35.07674009970388, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:19:54 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:19:54 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5890371350195, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:19:54 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5890491354196, flushed existing data. Was Timestamp=0, Now=5890371356790, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:19:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:19:54 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:19:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5888076049107 (5888076049107 @ 0) for mcu = 49053.487909 [27/06/2026 00:44:29] (49067.300409225 sec) to 5890491390150 (from now=5890371390150, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5888076001107 (1507347456283431 @ 8) for mcu = 49053.487509 [27/06/2026 00:44:29] (49067.30000922627 sec) to 5890491390150 (from now=5890371390150, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5888076001107 (1507347456283431 @ 8) for mcu = 49053.487509 [27/06/2026 00:44:29] (49067.30000922627 sec) to 5890491390150 (from now=5890371390150, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.2886047. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531573, LCompressed = 1419220 } [McuMovementClient.cs@491] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:19:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 293 [PrintingService.cs@2118] +06/28/2026 03:19:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3005147. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531573, LCompressed = 1419220 } [McuMovementClient.cs@491] +06/28/2026 03:19:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 294, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.671090866806104, Elapsed = 06:43:58.6223222, TimeTotal = 12:05:38.9749775, Remaining = 05:21:40.3526553, Incomplete = False, SoftCount = 566, LayerPrintDone = 294, WeightsDone = 294, WeightDone = 02:25:56.4422766, WeightTotal = 03:54:25.7291122, WeightTotalEstimate = 03:54:25.7291123, LayerRecoatElapsed = 02:03:23.0042569, LayerRecoatDelays = 00:20:57, LayerRecoatPrintLayersElapsed = 01:20:22.0099800, LayerRecoatNoDelayAverage = 00:00:14.6682679, StreamingElapsed = 02:23:12.0727578, ObjectLayerOverheadAverageDuration = 00:00:00.0226794, TimeLayers = 07:17:35.4068065, CoolingElapsed = 00:00:00, CoolingEstimate = 02:33:09.3923823, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:16.8748270, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.0240185, JobElapsed = 03:43:40.7429339, JobTotal = 06:34:53.5079610, WeightEstimate = 01:28:29.2868357 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:41:35. coolingEstimate=02:33:09.3923823 [PrintingService.cs@1912] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.671090866806104;StartedAtUtc;06:43:58.6223222;12:05:38.9749775;05:21:40.3526553;False;566;294;294;02:25:56.4422766;03:54:25.7291122;03:54:25.7291123;02:03:23.0042569;00:20:57;01:20:22.0099800;00:00:14.6682679;02:23:12.0727578;00:00:00.0226794;07:17:35.4068065;00:00:00;02:33:09.3923823;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:16.8748270;00:00:00;00:04:25.0240185;03:43:40.7429339;06:34:53.5079610 [PrintingService.cs@1918] +06/28/2026 03:19:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 293. PreviewWeight=LayerWeight { Index = 293, FillTotalRelative = 0.1762424941122381, FillMaxRelative = 0.4023761009804734, TimeFromPreview = 35.07674009970388, EnergyDensityIncreaseFactor = 0 }, FillArea=19150.492587974095, PreviewFillRatio=0.4023761009804734, Results=4, StreamingSeconds (preview) = 35.07674009970388, StreamingSeconds (extrapolated) = 35.95268601968855, StreamingSeconds (no overhead) = 1.0340035 (02:23:12.0727578), LayerElapsedSeconds=20.1251556, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 294, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.671098410786136, Elapsed = 06:43:58.6149722, TimeTotal = 12:05:38.9558750, Remaining = 05:21:40.3409028, Incomplete = False, SoftCount = 566, LayerPrintDone = 294, WeightsDone = 294, WeightDone = 02:25:56.4349266, WeightTotal = 03:54:25.7149622, WeightTotalEstimate = 03:54:25.7149623, LayerRecoatElapsed = 02:03:23.0042569, LayerRecoatDelays = 00:20:57, LayerRecoatPrintLayersElapsed = 01:20:22.0099800, LayerRecoatNoDelayAverage = 00:00:14.6682679, StreamingElapsed = 02:23:12.0727578, ObjectLayerOverheadAverageDuration = 00:00:00.0226544, TimeLayers = 07:17:35.3926565, CoolingElapsed = 00:00:00, CoolingEstimate = 02:33:09.3874298, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:16.8748270, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.0240185, JobElapsed = 03:43:40.7454005, JobTotal = 06:34:53.4938110, WeightEstimate = 01:28:29.2800357 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:41:35. coolingEstimate=02:33:09.3874298 [PrintingService.cs@1912] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.671098410786136;StartedAtUtc;06:43:58.6149722;12:05:38.9558750;05:21:40.3409028;False;566;294;294;02:25:56.4349266;03:54:25.7149622;03:54:25.7149623;02:03:23.0042569;00:20:57;01:20:22.0099800;00:00:14.6682679;02:23:12.0727578;00:00:00.0226544;07:17:35.3926565;00:00:00;02:33:09.3874298;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:16.8748270;00:00:00;00:04:25.0240185;03:43:40.7454005;06:34:53.4938110 [PrintingService.cs@1918] +06/28/2026 03:19:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 294. PrevPreviewWeight=LayerWeight { Index = 293, FillTotalRelative = 0.1762424941122381, FillMaxRelative = 0.4023761009804734, TimeFromPreview = 35.07674009970388, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4023761009804734, PreviewWeight=LayerWeight { Index = 294, FillTotalRelative = 0.1768475846559534, FillMaxRelative = 0.40571457109249803, TimeFromPreview = 33.86648514942715, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3164164. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531573, LCompressed = 1419220 } [McuMovementClient.cs@491] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628879. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3796354. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531573, LCompressed = 1419220 } [McuMovementClient.cs@491] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3917361. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531573, LCompressed = 1419220 } [McuMovementClient.cs@491] +06/28/2026 03:19:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4074.218576007765, PrevLayerFillRatio=0.4023761009804734: Z1=104.26929866427203, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33323.12991912443, Z2 = 33950 } } [LayerClient.cs@969] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5889429841616 (5889429841616 @ 0) for mcu = 49064.769706 [27/06/2026 00:44:40] (49078.582013466665 sec) to 5890624948949 (from now=5890504948949, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5889429841616 (5889429841616 @ 0) for mcu = 49064.769706 [27/06/2026 00:44:40] (49078.582013466665 sec) to 5890624948949 (from external timestamp, flags=None, requested=5890624948949 (5890624948949 @ 0) for mcu = 49074.729139 [27/06/2026 00:44:50] (49088.54124124167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5889429841616 (5889429841616 @ 0) for mcu = 49064.769706 [27/06/2026 00:44:40] (49078.582013466665 sec) to 5890624948949 (from external timestamp, flags=None, requested=5890624948949 (5890624948949 @ 0) for mcu = 49074.729139 [27/06/2026 00:44:50] (49088.54124124167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:19:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0820342. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.5685435. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531573, LCompressed = 1419220 } [McuMovementClient.cs@491] +06/28/2026 03:20:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:20:10 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:20:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:20:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 294, Weight=LayerWeight { Index = 294, FillTotalRelative = 0.1768475846559534, FillMaxRelative = 0.40571457109249803, TimeFromPreview = 33.86648514942715, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:20:13 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5892639572214, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:20:13 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5892759577276, flushed existing data. Was Timestamp=0, Now=5892639579858, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:20:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:20:13 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:20:13 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:20:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5890491438150 (5890491438150 @ 0) for mcu = 49073.616567 [27/06/2026 00:44:49] (49087.42865125 sec) to 5892759651455 (from now=5892639651455, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5890491390150 (1507965795878477 @ 8) for mcu = 49073.616167 [27/06/2026 00:44:49] (49087.42825125251 sec) to 5892759651455 (from now=5892639651455, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5890491390150 (1507965795878477 @ 8) for mcu = 49073.616167 [27/06/2026 00:44:49] (49087.42825125251 sec) to 5892759651455 (from now=5892639651455, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:01. Loops = 4. [McuMovementClient.cs@475] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:01. Loops = 4. GC duration = 00:00:00.3597568. SinceCollect=00:01:06.5496816. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531574, LCompressed = 1419222 } [McuMovementClient.cs@478] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=123329, gen1=30648, gen2=897, LatencyMode=Interactive, FreeMemory=5750374400, Live=350771648, HeapSizeBytes=354041616, FragmentedBytes=3648656, TotalCommittedBytes=361332736, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:20:14 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 294 [PrintingService.cs@2118] +06/28/2026 03:20:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0216160. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531574, LCompressed = 1419222 } [McuMovementClient.cs@491] +06/28/2026 03:20:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 295, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.78099257497313, Elapsed = 06:44:17.8826663, TimeTotal = 12:04:47.7214379, Remaining = 05:20:29.8387716, Incomplete = False, SoftCount = 566, LayerPrintDone = 295, WeightsDone = 295, WeightDone = 02:25:57.8532301, WeightTotal = 03:53:47.4029840, WeightTotalEstimate = 03:53:47.4029841, LayerRecoatElapsed = 02:03:40.8536475, LayerRecoatDelays = 00:21:00, LayerRecoatPrintLayersElapsed = 01:20:39.8593704, LayerRecoatNoDelayAverage = 00:00:14.6686992, StreamingElapsed = 02:23:13.4684069, ObjectLayerOverheadAverageDuration = 00:00:00.0226544, TimeLayers = 07:16:57.4412216, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:56.1044276, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:16.9308960, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.0304880, JobElapsed = 03:44:00.0138155, JobTotal = 06:34:15.4798376, WeightEstimate = 01:27:49.5497540 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:40:44. coolingEstimate=02:32:56.1044276 [PrintingService.cs@1912] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.78099257497313;StartedAtUtc;06:44:17.8826663;12:04:47.7214379;05:20:29.8387716;False;566;295;295;02:25:57.8532301;03:53:47.4029840;03:53:47.4029841;02:03:40.8536475;00:21:00;01:20:39.8593704;00:00:14.6686992;02:23:13.4684069;00:00:00.0226544;07:16:57.4412216;00:00:00;02:32:56.1044276;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:16.9308960;00:00:00;00:04:25.0304880;03:44:00.0138155;06:34:15.4798376 [PrintingService.cs@1918] +06/28/2026 03:20:14 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 294. PreviewWeight=LayerWeight { Index = 294, FillTotalRelative = 0.1768475846559534, FillMaxRelative = 0.40571457109249803, TimeFromPreview = 33.86648514942715, EnergyDensityIncreaseFactor = 0 }, FillArea=17749.032013820102, PreviewFillRatio=0.40571457109249803, Results=4, StreamingSeconds (preview) = 33.86648514942715, StreamingSeconds (extrapolated) = 38.70762733609915, StreamingSeconds (no overhead) = 1.3956491 (02:23:13.4684069), LayerElapsedSeconds=19.2683136, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 295, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.780989376513965, Elapsed = 06:44:17.8857934, TimeTotal = 12:04:47.7295375, Remaining = 05:20:29.8437441, Incomplete = False, SoftCount = 566, LayerPrintDone = 295, WeightsDone = 295, WeightDone = 02:25:57.8563572, WeightTotal = 03:53:47.4089837, WeightTotalEstimate = 03:53:47.4089837, LayerRecoatElapsed = 02:03:40.8536475, LayerRecoatDelays = 00:21:00, LayerRecoatPrintLayersElapsed = 01:20:39.8593704, LayerRecoatNoDelayAverage = 00:00:14.6686992, StreamingElapsed = 02:23:13.4684069, ObjectLayerOverheadAverageDuration = 00:00:00.0226650, TimeLayers = 07:16:57.4472213, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:56.1065275, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:16.9308960, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.0304880, JobElapsed = 03:44:00.0158756, JobTotal = 06:34:15.4858373, WeightEstimate = 01:27:49.5526265 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:40:44. coolingEstimate=02:32:56.1065275 [PrintingService.cs@1912] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.780989376513965;StartedAtUtc;06:44:17.8857934;12:04:47.7295375;05:20:29.8437441;False;566;295;295;02:25:57.8563572;03:53:47.4089837;03:53:47.4089837;02:03:40.8536475;00:21:00;01:20:39.8593704;00:00:14.6686992;02:23:13.4684069;00:00:00.0226650;07:16:57.4472213;00:00:00;02:32:56.1065275;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:16.9308960;00:00:00;00:04:25.0304880;03:44:00.0158756;06:34:15.4858373 [PrintingService.cs@1918] +06/28/2026 03:20:14 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 295. PrevPreviewWeight=LayerWeight { Index = 294, FillTotalRelative = 0.1768475846559534, FillMaxRelative = 0.40571457109249803, TimeFromPreview = 33.86648514942715, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40571457109249803, PreviewWeight=LayerWeight { Index = 295, FillTotalRelative = 0.17654759402698036, FillMaxRelative = 0.40358923668006486, TimeFromPreview = 35.02753337500549, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (182 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0428446. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531574, LCompressed = 1419222 } [McuMovementClient.cs@491] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632591. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1091493. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531574, LCompressed = 1419222 } [McuMovementClient.cs@491] +06/28/2026 03:20:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1219387. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531574, LCompressed = 1419222 } [McuMovementClient.cs@491] +06/28/2026 03:20:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4079.6300445365982, PrevLayerFillRatio=0.40571457109249803: Z1=104.40779148632335, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:20:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33427.537710610755, Z2 = 34050 } } [LayerClient.cs@969] +06/28/2026 03:20:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5891844633753 (5891844633753 @ 0) for mcu = 49084.893411 [27/06/2026 00:45:00] (49098.705281275 sec) to 5892938533320 (from now=5892818533320, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5891844633753 (5891844633753 @ 0) for mcu = 49084.893411 [27/06/2026 00:45:00] (49098.705281275 sec) to 5892938533320 (from external timestamp, flags=None, requested=5892938533320 (5892938533320 @ 0) for mcu = 49094.009431 [27/06/2026 00:45:09] (49107.821111 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:20:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5891844633753 (5891844633753 @ 0) for mcu = 49084.893411 [27/06/2026 00:45:00] (49098.705281275 sec) to 5892938533320 (from external timestamp, flags=None, requested=5892938533320 (5892938533320 @ 0) for mcu = 49094.009431 [27/06/2026 00:45:09] (49107.821111 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:20:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0711447. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3000698. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531574, LCompressed = 1419222 } [McuMovementClient.cs@491] +06/28/2026 03:20:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:20:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0232095 ~ 5.98 samples/sec, 11 resets, 134 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:20:31 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:20:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:20:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 295, Weight=LayerWeight { Index = 295, FillTotalRelative = 0.17654759402698036, FillMaxRelative = 0.40358923668006486, TimeFromPreview = 35.02753337500549, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:20:34 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:20:34 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5895207177228, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:20:34 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5895327182697, flushed existing data. Was Timestamp=0, Now=5895207185197, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:20:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:20:34 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:20:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5892759699455 (5892759699455 @ 0) for mcu = 49092.519102 [27/06/2026 00:45:08] (49106.330828791666 sec) to 5895327201606 (from now=5895207201606, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5892759651455 (1508546470772563 @ 8) for mcu = 49092.518702 [27/06/2026 00:45:08] (49106.33042879437 sec) to 5895327201606 (from now=5895207201606, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5892759651455 (1508546470772563 @ 8) for mcu = 49092.518702 [27/06/2026 00:45:08] (49106.33042879437 sec) to 5895327201606 (from now=5895207201606, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.0399502. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531575, LCompressed = 1419224 } [McuMovementClient.cs@491] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:20:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 295 [PrintingService.cs@2118] +06/28/2026 03:20:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.0542778. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531575, LCompressed = 1419224 } [McuMovementClient.cs@491] +06/28/2026 03:20:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 296, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.88348671134029, Elapsed = 06:44:38.9230468, TimeTotal = 12:04:05.6124261, Remaining = 05:19:26.6893793, Incomplete = False, SoftCount = 566, LayerPrintDone = 296, WeightsDone = 296, WeightDone = 02:25:58.9258364, WeightTotal = 03:53:11.6457749, WeightTotalEstimate = 03:53:11.6457749, LayerRecoatElapsed = 02:04:00.8214217, LayerRecoatDelays = 00:21:03, LayerRecoatPrintLayersElapsed = 01:20:59.8271446, LayerRecoatNoDelayAverage = 00:00:14.6741601, StreamingElapsed = 02:23:14.5152211, ObjectLayerOverheadAverageDuration = 00:00:00.0226650, TimeLayers = 07:16:26.2493610, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:45.1872764, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:17.6408130, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.1124015, JobElapsed = 03:44:21.0563197, JobTotal = 06:33:43.4961465, WeightEstimate = 01:27:12.7199385 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:40:02. coolingEstimate=02:32:45.1872764 [PrintingService.cs@1912] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.88348671134029;StartedAtUtc;06:44:38.9230468;12:04:05.6124261;05:19:26.6893793;False;566;296;296;02:25:58.9258364;03:53:11.6457749;03:53:11.6457749;02:04:00.8214217;00:21:03;01:20:59.8271446;00:00:14.6741601;02:23:14.5152211;00:00:00.0226650;07:16:26.2493610;00:00:00;02:32:45.1872764;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:17.6408130;00:00:00;00:04:25.1124015;03:44:21.0563197;06:33:43.4961465 [PrintingService.cs@1918] +06/28/2026 03:20:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 295. PreviewWeight=LayerWeight { Index = 295, FillTotalRelative = 0.17654759402698036, FillMaxRelative = 0.40358923668006486, TimeFromPreview = 35.02753337500549, EnergyDensityIncreaseFactor = 0 }, FillArea=19954.93207943994, PreviewFillRatio=0.40358923668006486, Results=4, StreamingSeconds (preview) = 35.02753337500549, StreamingSeconds (extrapolated) = 35.81002299399015, StreamingSeconds (no overhead) = 1.0468142 (02:23:14.5152211), LayerElapsedSeconds=21.0406788, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 296, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.88348101235968, Elapsed = 06:44:38.9286412, TimeTotal = 12:04:05.6268675, Remaining = 05:19:26.6982263, Incomplete = False, SoftCount = 566, LayerPrintDone = 296, WeightsDone = 296, WeightDone = 02:25:58.9314308, WeightTotal = 03:53:11.6564723, WeightTotalEstimate = 03:53:11.6564723, LayerRecoatElapsed = 02:04:00.8214217, LayerRecoatDelays = 00:21:03, LayerRecoatPrintLayersElapsed = 01:20:59.8271446, LayerRecoatNoDelayAverage = 00:00:14.6741601, StreamingElapsed = 02:23:14.5152211, ObjectLayerOverheadAverageDuration = 00:00:00.0226839, TimeLayers = 07:16:26.2600584, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:45.1910204, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:17.6408130, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.1124015, JobElapsed = 03:44:21.0585143, JobTotal = 06:33:43.5068439, WeightEstimate = 01:27:12.7250415 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:40:02. coolingEstimate=02:32:45.1910204 [PrintingService.cs@1912] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.88348101235968;StartedAtUtc;06:44:38.9286412;12:04:05.6268675;05:19:26.6982263;False;566;296;296;02:25:58.9314308;03:53:11.6564723;03:53:11.6564723;02:04:00.8214217;00:21:03;01:20:59.8271446;00:00:14.6741601;02:23:14.5152211;00:00:00.0226839;07:16:26.2600584;00:00:00;02:32:45.1910204;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:17.6408130;00:00:00;00:04:25.1124015;03:44:21.0585143;06:33:43.5068439 [PrintingService.cs@1918] +06/28/2026 03:20:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 296. PrevPreviewWeight=LayerWeight { Index = 295, FillTotalRelative = 0.17654759402698036, FillMaxRelative = 0.40358923668006486, TimeFromPreview = 35.02753337500549, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40358923668006486, PreviewWeight=LayerWeight { Index = 296, FillTotalRelative = 0.17723417957180604, FillMaxRelative = 0.40687497245808346, TimeFromPreview = 34.10320332145929, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.0836582. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531575, LCompressed = 1419224 } [McuMovementClient.cs@491] +06/28/2026 03:20:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629127. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.1458344. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531575, LCompressed = 1419224 } [McuMovementClient.cs@491] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.1587541. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531575, LCompressed = 1419224 } [McuMovementClient.cs@491] +06/28/2026 03:20:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4076.184999381123, PrevLayerFillRatio=0.40358923668006486: Z1=104.31962428676673, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33531.85733489752, Z2 = 34150 } } [LayerClient.cs@969] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5894158226071 (5894158226071 @ 0) for mcu = 49104.173732 [27/06/2026 00:45:20] (49117.985217258334 sec) to 5895462860383 (from now=5895342860383, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5894158226071 (5894158226071 @ 0) for mcu = 49104.173732 [27/06/2026 00:45:20] (49117.985217258334 sec) to 5895462860383 (from external timestamp, flags=None, requested=5895462860383 (5895462860383 @ 0) for mcu = 49115.045910 [27/06/2026 00:45:31] (49128.85716985833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5894158226071 (5894158226071 @ 0) for mcu = 49104.173732 [27/06/2026 00:45:20] (49117.985217258334 sec) to 5895462860383 (from external timestamp, flags=None, requested=5895462860383 (5895462860383 @ 0) for mcu = 49115.045910 [27/06/2026 00:45:31] (49128.85716985833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:20:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0793971. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.3341422. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531575, LCompressed = 1419224 } [McuMovementClient.cs@491] +06/28/2026 03:20:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:20:50 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:20:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:20:53 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 296, Weight=LayerWeight { Index = 296, FillTotalRelative = 0.17723417957180604, FillMaxRelative = 0.40687497245808346, TimeFromPreview = 34.10320332145929, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:20:53 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:20:53 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5897497203785, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:20:53 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5897617206731, flushed existing data. Was Timestamp=0, Now=5897497209294, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:20:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:20:53 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:20:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5895327249606 (5895327249606 @ 0) for mcu = 49113.915824 [27/06/2026 00:45:29] (49127.72708005 sec) to 5897617224667 (from now=5897497224667, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5895327201606 (1509203763611246 @ 8) for mcu = 49113.915424 [27/06/2026 00:45:29] (49127.72668005358 sec) to 5897617224667 (from now=5897497224667, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5895327201606 (1509203763611246 @ 8) for mcu = 49113.915424 [27/06/2026 00:45:29] (49127.72668005358 sec) to 5897617224667 (from now=5897497224667, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:54 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.1226201. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531576, LCompressed = 1419226 } [McuMovementClient.cs@491] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:20:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 296 [PrintingService.cs@2118] +06/28/2026 03:20:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.1343234. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531576, LCompressed = 1419226 } [McuMovementClient.cs@491] +06/28/2026 03:20:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 297, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.98721176916499, Elapsed = 06:44:58.0031110, TimeTotal = 12:03:19.2019663, Remaining = 05:18:21.1988553, Incomplete = False, SoftCount = 566, LayerPrintDone = 297, WeightsDone = 297, WeightDone = 02:25:59.9872838, WeightTotal = 03:52:36.5852516, WeightTotalEstimate = 03:52:36.5852516, LayerRecoatElapsed = 02:04:18.8400385, LayerRecoatDelays = 00:21:06, LayerRecoatPrintLayersElapsed = 01:21:17.8457615, LayerRecoatNoDelayAverage = 00:00:14.6749764, StreamingElapsed = 02:23:15.5483902, ObjectLayerOverheadAverageDuration = 00:00:00.0226839, TimeLayers = 07:15:51.8712427, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:33.1549349, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:17.7469320, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.1246460, JobElapsed = 03:44:40.1273414, JobTotal = 06:33:08.9996647, WeightEstimate = 01:26:36.5979678 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:39:16. coolingEstimate=02:32:33.1549349 [PrintingService.cs@1912] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.98721176916499;StartedAtUtc;06:44:58.0031110;12:03:19.2019663;05:18:21.1988553;False;566;297;297;02:25:59.9872838;03:52:36.5852516;03:52:36.5852516;02:04:18.8400385;00:21:06;01:21:17.8457615;00:00:14.6749764;02:23:15.5483902;00:00:00.0226839;07:15:51.8712427;00:00:00;02:32:33.1549349;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:17.7469320;00:00:00;00:04:25.1246460;03:44:40.1273414;06:33:08.9996647 [PrintingService.cs@1918] +06/28/2026 03:20:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 296. PreviewWeight=LayerWeight { Index = 296, FillTotalRelative = 0.17723417957180604, FillMaxRelative = 0.40687497245808346, TimeFromPreview = 34.10320332145929, EnergyDensityIncreaseFactor = 0 }, FillArea=19885.876655301334, PreviewFillRatio=0.40687497245808346, Results=4, StreamingSeconds (preview) = 34.10320332145929, StreamingSeconds (extrapolated) = 35.10438980321495, StreamingSeconds (no overhead) = 1.0331691 (02:23:15.5483902), LayerElapsedSeconds=19.0688453, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 297, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 55.987215476049855, Elapsed = 06:44:57.9994578, TimeTotal = 12:03:19.1925678, Remaining = 05:18:21.1931100, Incomplete = False, SoftCount = 566, LayerPrintDone = 297, WeightsDone = 297, WeightDone = 02:25:59.9836306, WeightTotal = 03:52:36.5782897, WeightTotalEstimate = 03:52:36.5782898, LayerRecoatElapsed = 02:04:18.8400385, LayerRecoatDelays = 00:21:06, LayerRecoatPrintLayersElapsed = 01:21:17.8457615, LayerRecoatNoDelayAverage = 00:00:14.6749764, StreamingElapsed = 02:23:15.5483902, ObjectLayerOverheadAverageDuration = 00:00:00.0226716, TimeLayers = 07:15:51.8642808, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:33.1524983, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:17.7469320, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.1246460, JobElapsed = 03:44:40.1294883, JobTotal = 06:33:08.9927028, WeightEstimate = 01:26:36.5946592 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:39:16. coolingEstimate=02:32:33.1524983 [PrintingService.cs@1912] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 55.987215476049855;StartedAtUtc;06:44:57.9994578;12:03:19.1925678;05:18:21.1931100;False;566;297;297;02:25:59.9836306;03:52:36.5782897;03:52:36.5782898;02:04:18.8400385;00:21:06;01:21:17.8457615;00:00:14.6749764;02:23:15.5483902;00:00:00.0226716;07:15:51.8642808;00:00:00;02:32:33.1524983;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:17.7469320;00:00:00;00:04:25.1246460;03:44:40.1294883;06:33:08.9927028 [PrintingService.cs@1918] +06/28/2026 03:20:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 297. PrevPreviewWeight=LayerWeight { Index = 296, FillTotalRelative = 0.17723417957180604, FillMaxRelative = 0.40687497245808346, TimeFromPreview = 34.10320332145929, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40687497245808346, PreviewWeight=LayerWeight { Index = 297, FillTotalRelative = 0.1768797389857273, FillMaxRelative = 0.40461817397040856, TimeFromPreview = 35.160434313619476, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.1519766. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531576, LCompressed = 1419226 } [McuMovementClient.cs@491] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633260. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.2196445. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531576, LCompressed = 1419226 } [McuMovementClient.cs@491] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.2297336. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531576, LCompressed = 1419226 } [McuMovementClient.cs@491] +06/28/2026 03:20:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4081.510988579818, PrevLayerFillRatio=0.40687497245808346: Z1=104.45592948200384, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33636.313264379525, Z2 = 34250 } } [LayerClient.cs@969] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5896682556373 (5896682556373 @ 0) for mcu = 49125.210260 [27/06/2026 00:45:41] (49139.02130310833 sec) to 5897751357590 (from now=5897631357590, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5896682556373 (5896682556373 @ 0) for mcu = 49125.210260 [27/06/2026 00:45:41] (49139.02130310833 sec) to 5897751357590 (from external timestamp, flags=None, requested=5897751357590 (5897751357590 @ 0) for mcu = 49134.117123 [27/06/2026 00:45:50] (49147.92797991667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5896682556373 (5896682556373 @ 0) for mcu = 49125.210260 [27/06/2026 00:45:41] (49139.02130310833 sec) to 5897751357590 (from external timestamp, flags=None, requested=5897751357590 (5897751357590 @ 0) for mcu = 49134.117123 [27/06/2026 00:45:50] (49147.92797991667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:20:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0623541. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.4067583. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531576, LCompressed = 1419226 } [McuMovementClient.cs@491] +06/28/2026 03:21:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:21:16 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:21:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:21:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 297, Weight=LayerWeight { Index = 297, FillTotalRelative = 0.1768797389857273, FillMaxRelative = 0.40461817397040856, TimeFromPreview = 35.160434313619476, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:21:19 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5900510177036, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:21:19 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5900630180178, flushed existing data. Was Timestamp=0, Now=5900510182674, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5897617272667 (5897617272667 @ 0) for mcu = 49132.999720 [27/06/2026 00:45:48] (49146.810605558334 sec) to 5900630293286 (from now=5900510293286, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5897617224667 (1509790009514883 @ 8) for mcu = 49132.999320 [27/06/2026 00:45:48] (49146.8102055626 sec) to 5900630293286 (from now=5900510293286, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5897617224667 (1509790009514883 @ 8) for mcu = 49132.999320 [27/06/2026 00:45:48] (49146.8102055626 sec) to 5900630293286 (from now=5900510293286, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (59 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:01. Loops = 4. [McuMovementClient.cs@475] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:01. Loops = 4. GC duration = 00:00:00.3541832. SinceCollect=00:01:05.5845554. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531577, LCompressed = 1419228 } [McuMovementClient.cs@478] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=123509, gen1=30723, gen2=898, LatencyMode=Interactive, FreeMemory=5751554048, Live=351289800, HeapSizeBytes=354000384, FragmentedBytes=3105176, TotalCommittedBytes=360628224, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:21:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 297 [PrintingService.cs@2118] +06/28/2026 03:21:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0132606. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531577, LCompressed = 1419228 } [McuMovementClient.cs@491] +06/28/2026 03:21:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 298, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.08662786846249, Elapsed = 06:45:23.4678843, TimeTotal = 12:02:47.6774816, Remaining = 05:17:24.2095973, Incomplete = False, SoftCount = 566, LayerPrintDone = 298, WeightsDone = 298, WeightDone = 02:26:01.3936084, WeightTotal = 03:52:00.6177676, WeightTotalEstimate = 03:52:00.6177677, LayerRecoatElapsed = 02:04:42.8984872, LayerRecoatDelays = 00:21:09, LayerRecoatPrintLayersElapsed = 01:21:41.9042100, LayerRecoatNoDelayAverage = 00:00:14.6900673, StreamingElapsed = 02:23:16.9356964, ObjectLayerOverheadAverageDuration = 00:00:00.0226716, TimeLayers = 07:15:28.5197725, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:24.9819204, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:19.7087490, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.3510095, JobElapsed = 03:45:05.5910182, JobTotal = 06:32:43.4600140, WeightEstimate = 01:25:59.2241593 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:38:44. coolingEstimate=02:32:24.9819204 [PrintingService.cs@1912] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.08662786846249;StartedAtUtc;06:45:23.4678843;12:02:47.6774816;05:17:24.2095973;False;566;298;298;02:26:01.3936084;03:52:00.6177676;03:52:00.6177677;02:04:42.8984872;00:21:09;01:21:41.9042100;00:00:14.6900673;02:23:16.9356964;00:00:00.0226716;07:15:28.5197725;00:00:00;02:32:24.9819204;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:19.7087490;00:00:00;00:04:25.3510095;03:45:05.5910182;06:32:43.4600140 [PrintingService.cs@1918] +06/28/2026 03:21:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 297. PreviewWeight=LayerWeight { Index = 297, FillTotalRelative = 0.1768797389857273, FillMaxRelative = 0.40461817397040856, TimeFromPreview = 35.160434313619476, EnergyDensityIncreaseFactor = 0 }, FillArea=19177.33896352935, PreviewFillRatio=0.40461817397040856, Results=4, StreamingSeconds (preview) = 35.160434313619476, StreamingSeconds (extrapolated) = 36.34782830010176, StreamingSeconds (no overhead) = 1.3873062 (02:23:16.9356964), LayerElapsedSeconds=25.4623351, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 298, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.08663190259654, Elapsed = 06:45:23.4638911, TimeTotal = 12:02:47.6672426, Remaining = 05:17:24.2033515, Incomplete = False, SoftCount = 566, LayerPrintDone = 298, WeightsDone = 298, WeightDone = 02:26:01.3896152, WeightTotal = 03:52:00.6101832, WeightTotalEstimate = 03:52:00.6101833, LayerRecoatElapsed = 02:04:42.8984872, LayerRecoatDelays = 00:21:09, LayerRecoatPrintLayersElapsed = 01:21:41.9042100, LayerRecoatNoDelayAverage = 00:00:14.6900673, StreamingElapsed = 02:23:16.9356964, ObjectLayerOverheadAverageDuration = 00:00:00.0226582, TimeLayers = 07:15:28.5121881, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:24.9792658, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:19.7087490, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.3510095, JobElapsed = 03:45:05.5930926, JobTotal = 06:32:43.4524296, WeightEstimate = 01:25:59.2205681 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:38:44. coolingEstimate=02:32:24.9792658 [PrintingService.cs@1912] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.08663190259654;StartedAtUtc;06:45:23.4638911;12:02:47.6672426;05:17:24.2033515;False;566;298;298;02:26:01.3896152;03:52:00.6101832;03:52:00.6101833;02:04:42.8984872;00:21:09;01:21:41.9042100;00:00:14.6900673;02:23:16.9356964;00:00:00.0226582;07:15:28.5121881;00:00:00;02:32:24.9792658;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:19.7087490;00:00:00;00:04:25.3510095;03:45:05.5930926;06:32:43.4524296 [PrintingService.cs@1918] +06/28/2026 03:21:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 298. PrevPreviewWeight=LayerWeight { Index = 297, FillTotalRelative = 0.1768797389857273, FillMaxRelative = 0.40461817397040856, TimeFromPreview = 35.160434313619476, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40461817397040856, PreviewWeight=LayerWeight { Index = 298, FillTotalRelative = 0.1775098305083331, FillMaxRelative = 0.4078063855650629, TimeFromPreview = 33.91556085361665, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0295469. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531577, LCompressed = 1419228 } [McuMovementClient.cs@491] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0608002. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0943920. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531577, LCompressed = 1419228 } [McuMovementClient.cs@491] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1054996. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531577, LCompressed = 1419228 } [McuMovementClient.cs@491] +06/28/2026 03:21:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4077.8528477002633, PrevLayerFillRatio=0.40461817397040856: Z1=104.36230863746387, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33740.67557301699, Z2 = 34350 } } [LayerClient.cs@969] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5898971049717 (5898971049717 @ 0) for mcu = 49144.281427 [27/06/2026 00:46:00] (49158.092080975 sec) to 5900806509194 (from now=5900686509194, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5898971049717 (5898971049717 @ 0) for mcu = 49144.281427 [27/06/2026 00:46:00] (49158.092080975 sec) to 5900806509194 (from external timestamp, flags=None, requested=5900806509194 (5900806509194 @ 0) for mcu = 49159.577240 [27/06/2026 00:46:15] (49173.38757661667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5898971049717 (5898971049717 @ 0) for mcu = 49144.281427 [27/06/2026 00:46:00] (49158.092080975 sec) to 5900806509194 (from external timestamp, flags=None, requested=5900806509194 (5900806509194 @ 0) for mcu = 49159.577240 [27/06/2026 00:46:15] (49173.38757661667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:21:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0891572 ~ 5.99 samples/sec, 11 resets, 134 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:21:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0750185. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2851144. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531577, LCompressed = 1419228 } [McuMovementClient.cs@491] +06/28/2026 03:21:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:21:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:21:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:21:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 298, Weight=LayerWeight { Index = 298, FillTotalRelative = 0.1775098305083331, FillMaxRelative = 0.4078063855650629, TimeFromPreview = 33.91556085361665, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:21:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:21:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5902906952145, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:21:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5903026958347, flushed existing data. Was Timestamp=0, Now=5902906960781, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:21:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:21:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:21:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5900630341286 (5900630341286 @ 0) for mcu = 49158.109120 [27/06/2026 00:46:14] (49171.91951071667 sec) to 5903026984054 (from now=5902906984054, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5900630293286 (1510561355081302 @ 8) for mcu = 49158.108720 [27/06/2026 00:46:14] (49171.919110719464 sec) to 5903026984054 (from now=5902906984054, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5900630293286 (1510561355081302 @ 8) for mcu = 49158.108720 [27/06/2026 00:46:14] (49171.919110719464 sec) to 5903026984054 (from now=5902906984054, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6220165. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531578, LCompressed = 1419230 } [McuMovementClient.cs@491] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:21:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 298 [PrintingService.cs@2118] +06/28/2026 03:21:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6332043. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531578, LCompressed = 1419230 } [McuMovementClient.cs@491] +06/28/2026 03:21:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 299, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.18364382486678, Elapsed = 06:45:43.0900602, TimeTotal = 12:02:07.7167570, Remaining = 05:16:24.6266968, Incomplete = False, SoftCount = 566, LayerPrintDone = 299, WeightsDone = 299, WeightDone = 02:26:02.4468215, WeightTotal = 03:51:29.2843008, WeightTotalEstimate = 03:51:29.2843009, LayerRecoatElapsed = 02:05:01.4674500, LayerRecoatDelays = 00:21:12, LayerRecoatPrintLayersElapsed = 01:22:00.4731726, LayerRecoatNoDelayAverage = 00:00:14.6921402, StreamingElapsed = 02:23:17.9702445, ObjectLayerOverheadAverageDuration = 00:00:00.0226582, TimeLayers = 07:14:58.9192358, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:14.6217325, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:19.9782260, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.3821030, JobElapsed = 03:45:25.2130631, JobTotal = 06:32:13.5589068, WeightEstimate = 01:25:26.8374794 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:38:04. coolingEstimate=02:32:14.6217325 [PrintingService.cs@1912] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.18364382486678;StartedAtUtc;06:45:43.0900602;12:02:07.7167570;05:16:24.6266968;False;566;299;299;02:26:02.4468215;03:51:29.2843008;03:51:29.2843009;02:05:01.4674500;00:21:12;01:22:00.4731726;00:00:14.6921402;02:23:17.9702445;00:00:00.0226582;07:14:58.9192358;00:00:00;02:32:14.6217325;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:19.9782260;00:00:00;00:04:25.3821030;03:45:25.2130631;06:32:13.5589068 [PrintingService.cs@1918] +06/28/2026 03:21:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 298. PreviewWeight=LayerWeight { Index = 298, FillTotalRelative = 0.1775098305083331, FillMaxRelative = 0.4078063855650629, TimeFromPreview = 33.91556085361665, EnergyDensityIncreaseFactor = 0 }, FillArea=17718.363600089822, PreviewFillRatio=0.4078063855650629, Results=4, StreamingSeconds (preview) = 33.91556085361665, StreamingSeconds (extrapolated) = 31.36043044857582, StreamingSeconds (no overhead) = 1.0345481 (02:23:17.9702445), LayerElapsedSeconds=19.6209063, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 299, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.18364791471105, Elapsed = 06:45:43.0859938, TimeTotal = 12:02:07.7063653, Remaining = 05:16:24.6203715, Incomplete = False, SoftCount = 566, LayerPrintDone = 299, WeightsDone = 299, WeightDone = 02:26:02.4427551, WeightTotal = 03:51:29.2766032, WeightTotalEstimate = 03:51:29.2766033, LayerRecoatElapsed = 02:05:01.4674500, LayerRecoatDelays = 00:21:12, LayerRecoatPrintLayersElapsed = 01:22:00.4731726, LayerRecoatNoDelayAverage = 00:00:14.6921402, StreamingElapsed = 02:23:17.9702445, ObjectLayerOverheadAverageDuration = 00:00:00.0226446, TimeLayers = 07:14:58.9115382, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:14.6190384, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:19.9782260, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.3821030, JobElapsed = 03:45:25.2156155, JobTotal = 06:32:13.5512092, WeightEstimate = 01:25:26.8338482 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:38:04. coolingEstimate=02:32:14.6190384 [PrintingService.cs@1912] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.18364791471105;StartedAtUtc;06:45:43.0859938;12:02:07.7063653;05:16:24.6203715;False;566;299;299;02:26:02.4427551;03:51:29.2766032;03:51:29.2766033;02:05:01.4674500;00:21:12;01:22:00.4731726;00:00:14.6921402;02:23:17.9702445;00:00:00.0226446;07:14:58.9115382;00:00:00;02:32:14.6190384;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:19.9782260;00:00:00;00:04:25.3821030;03:45:25.2156155;06:32:13.5512092 [PrintingService.cs@1918] +06/28/2026 03:21:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 299. PrevPreviewWeight=LayerWeight { Index = 298, FillTotalRelative = 0.1775098305083331, FillMaxRelative = 0.4078063855650629, TimeFromPreview = 33.91556085361665, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4078063855650629, PreviewWeight=LayerWeight { Index = 299, FillTotalRelative = 0.1771952048929103, FillMaxRelative = 0.40559272584177997, TimeFromPreview = 35.31138355078522, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6529872. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531578, LCompressed = 1419230 } [McuMovementClient.cs@491] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633205. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.7190205. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531578, LCompressed = 1419230 } [McuMovementClient.cs@491] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.7296879. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531578, LCompressed = 1419230 } [McuMovementClient.cs@491] +06/28/2026 03:21:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4083.0207557925323, PrevLayerFillRatio=0.4078063855650629: Z1=104.49456814742622, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33845.17014116442, Z2 = 34450 } } [LayerClient.cs@969] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5902026204186 (5902026204186 @ 0) for mcu = 49169.741559 [27/06/2026 00:46:25] (49183.55170155 sec) to 5903161407446 (from now=5903041407446, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5902026204186 (5902026204186 @ 0) for mcu = 49169.741559 [27/06/2026 00:46:25] (49183.55170155 sec) to 5903161407446 (from external timestamp, flags=None, requested=5903161407446 (5903161407446 @ 0) for mcu = 49179.201780 [27/06/2026 00:46:35] (49193.011728716665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5902026204186 (5902026204186 @ 0) for mcu = 49169.741559 [27/06/2026 00:46:25] (49183.55170155 sec) to 5903161407446 (from external timestamp, flags=None, requested=5903161407446 (5903161407446 @ 0) for mcu = 49179.201780 [27/06/2026 00:46:35] (49193.011728716665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:21:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0786979. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.9058540. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531578, LCompressed = 1419230 } [McuMovementClient.cs@491] +06/28/2026 03:21:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:21:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.5 [HeaterCheck.cs@111] +06/28/2026 03:21:54 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:21:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:21:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 299, Weight=LayerWeight { Index = 299, FillTotalRelative = 0.1771952048929103, FillMaxRelative = 0.40559272584177997, TimeFromPreview = 35.31138355078522, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:21:57 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:21:57 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5905162790020, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:21:57 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5905282793899, flushed existing data. Was Timestamp=0, Now=5905162796471, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:21:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:21:57 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:21:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5903027032054 (5903027032054 @ 0) for mcu = 49178.082008 [27/06/2026 00:46:34] (49191.891933783336 sec) to 5905282850006 (from now=5905162850006, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5903026984054 (1511174907917994 @ 8) for mcu = 49178.081608 [27/06/2026 00:46:34] (49191.89153378887 sec) to 5905282850006 (from now=5905162850006, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5903026984054 (1511174907917994 @ 8) for mcu = 49178.081608 [27/06/2026 00:46:34] (49191.89153378887 sec) to 5905282850006 (from now=5905162850006, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.4188197. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531579, LCompressed = 1419232 } [McuMovementClient.cs@491] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:21:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 299 [PrintingService.cs@2118] +06/28/2026 03:21:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.4296791. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531579, LCompressed = 1419232 } [McuMovementClient.cs@491] +06/28/2026 03:21:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 300, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.31604589759329, Elapsed = 06:46:41.5666870, TimeTotal = 12:02:09.6874773, Remaining = 05:15:28.1207903, Incomplete = False, SoftCount = 566, LayerPrintDone = 300, WeightsDone = 300, WeightDone = 02:26:43.1769678, WeightTotal = 03:51:30.6371864, WeightTotalEstimate = 03:51:30.6371865, LayerRecoatElapsed = 02:05:19.2139305, LayerRecoatDelays = 00:21:15, LayerRecoatPrintLayersElapsed = 01:22:18.2196531, LayerRecoatNoDelayAverage = 00:00:14.6922681, StreamingElapsed = 02:23:19.0007007, ObjectLayerOverheadAverageDuration = 00:00:00.0226446, TimeLayers = 07:15:00.3790286, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:15.1326600, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:19.9948530, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.3840215, JobElapsed = 03:45:44.0084465, JobTotal = 06:32:15.0001541, WeightEstimate = 01:24:47.4602187 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:37:27. coolingEstimate=02:32:15.1326600 [PrintingService.cs@1912] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.31604589759329;StartedAtUtc;06:46:41.5666870;12:02:09.6874773;05:15:28.1207903;False;566;300;300;02:26:43.1769678;03:51:30.6371864;03:51:30.6371865;02:05:19.2139305;00:21:15;01:22:18.2196531;00:00:14.6922681;02:23:19.0007007;00:00:00.0226446;07:15:00.3790286;00:00:00;02:32:15.1326600;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:19.9948530;00:00:00;00:04:25.3840215;03:45:44.0084465;06:32:15.0001541 [PrintingService.cs@1918] +06/28/2026 03:21:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 299. PreviewWeight=LayerWeight { Index = 299, FillTotalRelative = 0.1771952048929103, FillMaxRelative = 0.40559272584177997, TimeFromPreview = 35.31138355078522, EnergyDensityIncreaseFactor = 0 }, FillArea=19975.070123960802, PreviewFillRatio=0.40559272584177997, Results=4, StreamingSeconds (preview) = 35.31138355078522, StreamingSeconds (extrapolated) = 38.350984925391515, StreamingSeconds (no overhead) = 1.0304562 (02:23:19.0007007), LayerElapsedSeconds=18.7931646, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 300, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.31605073964124, Elapsed = 06:46:41.5618571, TimeTotal = 12:02:09.6751754, Remaining = 05:15:28.1133183, Incomplete = False, SoftCount = 566, LayerPrintDone = 300, WeightsDone = 300, WeightDone = 02:26:43.1721379, WeightTotal = 03:51:30.6280739, WeightTotalEstimate = 03:51:30.6280739, LayerRecoatElapsed = 02:05:19.2139305, LayerRecoatDelays = 00:21:15, LayerRecoatPrintLayersElapsed = 01:22:18.2196531, LayerRecoatNoDelayAverage = 00:00:14.6922681, StreamingElapsed = 02:23:19.0007007, ObjectLayerOverheadAverageDuration = 00:00:00.0226285, TimeLayers = 07:15:00.3699161, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:15.1294706, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:19.9948530, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.3840215, JobElapsed = 03:45:44.0103481, JobTotal = 06:32:14.9910416, WeightEstimate = 01:24:47.4559360 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:37:27. coolingEstimate=02:32:15.1294706 [PrintingService.cs@1912] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.31605073964124;StartedAtUtc;06:46:41.5618571;12:02:09.6751754;05:15:28.1133183;False;566;300;300;02:26:43.1721379;03:51:30.6280739;03:51:30.6280739;02:05:19.2139305;00:21:15;01:22:18.2196531;00:00:14.6922681;02:23:19.0007007;00:00:00.0226285;07:15:00.3699161;00:00:00;02:32:15.1294706;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:19.9948530;00:00:00;00:04:25.3840215;03:45:44.0103481;06:32:14.9910416 [PrintingService.cs@1918] +06/28/2026 03:21:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 300. PrevPreviewWeight=LayerWeight { Index = 299, FillTotalRelative = 0.1771952048929103, FillMaxRelative = 0.40559272584177997, TimeFromPreview = 35.31138355078522, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40559272584177997, PreviewWeight=LayerWeight { Index = 300, FillTotalRelative = 0.17786339876184776, FillMaxRelative = 0.40881688628372026, TimeFromPreview = 33.910059837635956, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.4486273. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531579, LCompressed = 1419232 } [McuMovementClient.cs@491] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633054. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.5165960. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531579, LCompressed = 1419232 } [McuMovementClient.cs@491] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.5298489. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531579, LCompressed = 1419232 } [McuMovementClient.cs@491] +06/28/2026 03:21:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4079.4325403752537, PrevLayerFillRatio=0.40559272584177997: Z1=104.40273686787259, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 33949.57287803229, Z2 = 34550 } } [LayerClient.cs@969] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5904381112000 (5904381112000 @ 0) for mcu = 49189.366238 [27/06/2026 00:46:45] (49203.17593333333 sec) to 5905417373343 (from now=5905297373343, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:21:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5904381112000 (5904381112000 @ 0) for mcu = 49189.366238 [27/06/2026 00:46:45] (49203.17593333333 sec) to 5905417373343 (from external timestamp, flags=None, requested=5905417373343 (5905417373343 @ 0) for mcu = 49198.001932 [27/06/2026 00:46:53] (49211.811444525 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:21:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5904381112000 (5904381112000 @ 0) for mcu = 49189.366238 [27/06/2026 00:46:45] (49203.17593333333 sec) to 5905417373343 (from external timestamp, flags=None, requested=5905417373343 (5905417373343 @ 0) for mcu = 49198.001932 [27/06/2026 00:46:53] (49211.811444525 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:21:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0711505. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.7075623. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531579, LCompressed = 1419232 } [McuMovementClient.cs@491] +06/28/2026 03:22:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:22:14 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:22:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 03:22:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:22:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 300, Weight=LayerWeight { Index = 300, FillTotalRelative = 0.17786339876184776, FillMaxRelative = 0.40881688628372026, TimeFromPreview = 33.910059837635956, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:22:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5907540676818, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:22:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5907660679014, flushed existing data. Was Timestamp=0, Now=5907540681702, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5905282898006 (5905282898006 @ 0) for mcu = 49196.881343 [27/06/2026 00:46:52] (49210.69081671667 sec) to 5907660717762 (from now=5907540717762, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5905282850006 (1511752409601650 @ 8) for mcu = 49196.880943 [27/06/2026 00:46:52] (49210.690416720376 sec) to 5907660717762 (from now=5907540717762, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5905282850006 (1511752409601650 @ 8) for mcu = 49196.880943 [27/06/2026 00:46:52] (49210.690416720376 sec) to 5907660717762 (from now=5907540717762, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 03:22:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 03:22:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 03:22:18 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.9997640. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.2368188. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531580, LCompressed = 1419234 } [McuMovementClient.cs@491] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:22:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 300 [PrintingService.cs@2118] +06/28/2026 03:22:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.2494823. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531580, LCompressed = 1419234 } [McuMovementClient.cs@491] +06/28/2026 03:22:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 301, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.44826787343108, Elapsed = 06:47:40.4861443, TimeTotal = 12:02:12.5716905, Remaining = 05:14:32.0855462, Incomplete = False, SoftCount = 566, LayerPrintDone = 301, WeightsDone = 301, WeightDone = 02:27:23.3293201, WeightTotal = 03:51:30.6643327, WeightTotalEstimate = 03:51:30.6643327, LayerRecoatElapsed = 02:05:37.9810355, LayerRecoatDelays = 00:21:18, LayerRecoatPrintLayersElapsed = 01:22:36.9867581, LayerRecoatNoDelayAverage = 00:00:14.6947912, StreamingElapsed = 02:23:20.0349740, ObjectLayerOverheadAverageDuration = 00:00:00.0226285, TimeLayers = 07:15:02.5154828, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:15.8804190, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:20.3228560, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.4218680, JobElapsed = 03:46:03.8269941, JobTotal = 06:32:16.7707588, WeightEstimate = 01:24:07.3350126 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:36:50. coolingEstimate=02:32:15.8804190 [PrintingService.cs@1912] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.44826787343108;StartedAtUtc;06:47:40.4861443;12:02:12.5716905;05:14:32.0855462;False;566;301;301;02:27:23.3293201;03:51:30.6643327;03:51:30.6643327;02:05:37.9810355;00:21:18;01:22:36.9867581;00:00:14.6947912;02:23:20.0349740;00:00:00.0226285;07:15:02.5154828;00:00:00;02:32:15.8804190;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:20.3228560;00:00:00;00:04:25.4218680;03:46:03.8269941;06:32:16.7707588 [PrintingService.cs@1918] +06/28/2026 03:22:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 300. PreviewWeight=LayerWeight { Index = 300, FillTotalRelative = 0.17786339876184776, FillMaxRelative = 0.40881688628372026, TimeFromPreview = 33.910059837635956, EnergyDensityIncreaseFactor = 0 }, FillArea=19917.039377000263, PreviewFillRatio=0.40881688628372026, Results=4, StreamingSeconds (preview) = 33.910059837635956, StreamingSeconds (extrapolated) = 39.09829491443293, StreamingSeconds (no overhead) = 1.0342733 (02:23:20.0349740), LayerElapsedSeconds=19.8173445, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 301, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.448272865776886, Elapsed = 06:47:40.4811476, TimeTotal = 12:02:12.5590063, Remaining = 05:14:32.0778587, Incomplete = False, SoftCount = 566, LayerPrintDone = 301, WeightsDone = 301, WeightDone = 02:27:23.3243234, WeightTotal = 03:51:30.6549370, WeightTotalEstimate = 03:51:30.6549371, LayerRecoatElapsed = 02:05:37.9810355, LayerRecoatDelays = 00:21:18, LayerRecoatPrintLayersElapsed = 01:22:36.9867581, LayerRecoatNoDelayAverage = 00:00:14.6947912, StreamingElapsed = 02:23:20.0349740, ObjectLayerOverheadAverageDuration = 00:00:00.0226119, TimeLayers = 07:15:02.5060871, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:15.8771305, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:20.3228560, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.4218680, JobElapsed = 03:46:03.8288443, JobTotal = 06:32:16.7613631, WeightEstimate = 01:24:07.3306137 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:36:50. coolingEstimate=02:32:15.8771305 [PrintingService.cs@1912] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.448272865776886;StartedAtUtc;06:47:40.4811476;12:02:12.5590063;05:14:32.0778587;False;566;301;301;02:27:23.3243234;03:51:30.6549370;03:51:30.6549371;02:05:37.9810355;00:21:18;01:22:36.9867581;00:00:14.6947912;02:23:20.0349740;00:00:00.0226119;07:15:02.5060871;00:00:00;02:32:15.8771305;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:20.3228560;00:00:00;00:04:25.4218680;03:46:03.8288443;06:32:16.7613631 [PrintingService.cs@1918] +06/28/2026 03:22:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 301. PrevPreviewWeight=LayerWeight { Index = 300, FillTotalRelative = 0.17786339876184776, FillMaxRelative = 0.40881688628372026, TimeFromPreview = 33.910059837635956, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40881688628372026, PreviewWeight=LayerWeight { Index = 301, FillTotalRelative = 0.17751246158861794, FillMaxRelative = 0.40667690876555673, TimeFromPreview = 35.3426938948481, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.2668233. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531580, LCompressed = 1419234 } [McuMovementClient.cs@491] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633107. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.3329518. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531580, LCompressed = 1419234 } [McuMovementClient.cs@491] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.3469235. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531580, LCompressed = 1419234 } [McuMovementClient.cs@491] +06/28/2026 03:22:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4084.6587194866456, PrevLayerFillRatio=0.40881688628372026: Z1=104.53648767688605, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34054.10936570918, Z2 = 34650 } } [LayerClient.cs@969] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5906637067092 (5906637067092 @ 0) for mcu = 49208.166355 [27/06/2026 00:47:04] (49221.9755591 sec) to 5907795443722 (from now=5907675443722, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5906637067092 (5906637067092 @ 0) for mcu = 49208.166355 [27/06/2026 00:47:04] (49221.9755591 sec) to 5907795443722 (from external timestamp, flags=None, requested=5907795443722 (5907795443722 @ 0) for mcu = 49217.819713 [27/06/2026 00:47:13] (49231.628697683336 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5906637067092 (5906637067092 @ 0) for mcu = 49208.166355 [27/06/2026 00:47:04] (49221.9755591 sec) to 5907795443722 (from external timestamp, flags=None, requested=5907795443722 (5907795443722 @ 0) for mcu = 49217.819713 [27/06/2026 00:47:13] (49231.628697683336 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:22:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1600373 ~ 6.02 samples/sec, 11 resets, 134 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:22:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0743458. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:22:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11.0743458. Loops = 45. GC duration = 00:00:00.3550961. SinceCollect=00:01:09.8796476. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531580, LCompressed = 1419234 } [McuMovementClient.cs@478] +06/28/2026 03:22:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=123697, gen1=30814, gen2=899, LatencyMode=Interactive, FreeMemory=5732073472, Live=351311416, HeapSizeBytes=355766048, FragmentedBytes=4911416, TotalCommittedBytes=362020864, PinnedObjectsCount=27, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:22:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:22:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (40 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:22:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:22:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:22:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 301, Weight=LayerWeight { Index = 301, FillTotalRelative = 0.17751246158861794, FillMaxRelative = 0.40667690876555673, TimeFromPreview = 35.3426938948481, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:22:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:22:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5910183013071, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:22:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5910303041761, flushed existing data. Was Timestamp=0, Now=5910183044648, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:22:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:22:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:22:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5907660765762 (5907660765762 @ 0) for mcu = 49216.697439 [27/06/2026 00:47:12] (49230.50638135 sec) to 5910303063952 (from now=5910183063952, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5907660717762 (1512361143747189 @ 8) for mcu = 49216.697039 [27/06/2026 00:47:12] (49230.50598135381 sec) to 5910303063952 (from now=5910183063952, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5907660717762 (1512361143747189 @ 8) for mcu = 49216.697039 [27/06/2026 00:47:12] (49230.50598135381 sec) to 5910303063952 (from now=5910183063952, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.3733551. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531581, LCompressed = 1419236 } [McuMovementClient.cs@491] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:22:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 301 [PrintingService.cs@2118] +06/28/2026 03:22:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.3857268. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531581, LCompressed = 1419236 } [McuMovementClient.cs@491] +06/28/2026 03:22:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 302, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.55163437305119, Elapsed = 06:48:02.5029657, TimeTotal = 12:01:32.2995721, Remaining = 05:13:29.7966064, Incomplete = False, SoftCount = 566, LayerPrintDone = 302, WeightsDone = 302, WeightDone = 02:27:24.3880811, WeightTotal = 03:50:54.4441639, WeightTotalEstimate = 03:50:54.4441640, LayerRecoatElapsed = 02:05:58.9390959, LayerRecoatDelays = 00:21:21, LayerRecoatPrintLayersElapsed = 01:22:57.9448186, LayerRecoatNoDelayAverage = 00:00:14.7024335, StreamingElapsed = 02:23:21.0761198, ObjectLayerOverheadAverageDuration = 00:00:00.0226119, TimeLayers = 07:14:32.6842840, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:05.4394994, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:21.3163550, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.5365025, JobElapsed = 03:46:25.8431268, JobTotal = 06:31:45.8314265, WeightEstimate = 01:23:30.0560829 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:36:10. coolingEstimate=02:32:05.4394994 [PrintingService.cs@1912] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.55163437305119;StartedAtUtc;06:48:02.5029657;12:01:32.2995721;05:13:29.7966064;False;566;302;302;02:27:24.3880811;03:50:54.4441639;03:50:54.4441640;02:05:58.9390959;00:21:21;01:22:57.9448186;00:00:14.7024335;02:23:21.0761198;00:00:00.0226119;07:14:32.6842840;00:00:00;02:32:05.4394994;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:21.3163550;00:00:00;00:04:25.5365025;03:46:25.8431268;06:31:45.8314265 [PrintingService.cs@1918] +06/28/2026 03:22:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 301. PreviewWeight=LayerWeight { Index = 301, FillTotalRelative = 0.17751246158861794, FillMaxRelative = 0.40667690876555673, TimeFromPreview = 35.3426938948481, EnergyDensityIncreaseFactor = 0 }, FillArea=19199.41378977256, PreviewFillRatio=0.40667690876555673, Results=4, StreamingSeconds (preview) = 35.3426938948481, StreamingSeconds (extrapolated) = 36.25191888916291, StreamingSeconds (no overhead) = 1.0411458 (02:23:21.0761198), LayerElapsedSeconds=22.0143459, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 302, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.5516407144521, Elapsed = 06:48:02.4965935, TimeTotal = 12:01:32.2834496, Remaining = 05:13:29.7868561, Incomplete = False, SoftCount = 566, LayerPrintDone = 302, WeightsDone = 302, WeightDone = 02:27:24.3817089, WeightTotal = 03:50:54.4322213, WeightTotalEstimate = 03:50:54.4322214, LayerRecoatElapsed = 02:05:58.9390959, LayerRecoatDelays = 00:21:21, LayerRecoatPrintLayersElapsed = 01:22:57.9448186, LayerRecoatNoDelayAverage = 00:00:14.7024335, StreamingElapsed = 02:23:21.0761198, ObjectLayerOverheadAverageDuration = 00:00:00.0225908, TimeLayers = 07:14:32.6723414, CoolingElapsed = 00:00:00, CoolingEstimate = 02:32:05.4353195, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:21.3163550, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.5365025, JobElapsed = 03:46:25.8457346, JobTotal = 06:31:45.8194839, WeightEstimate = 01:23:30.0505125 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:36:10. coolingEstimate=02:32:05.4353195 [PrintingService.cs@1912] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.5516407144521;StartedAtUtc;06:48:02.4965935;12:01:32.2834496;05:13:29.7868561;False;566;302;302;02:27:24.3817089;03:50:54.4322213;03:50:54.4322214;02:05:58.9390959;00:21:21;01:22:57.9448186;00:00:14.7024335;02:23:21.0761198;00:00:00.0225908;07:14:32.6723414;00:00:00;02:32:05.4353195;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:21.3163550;00:00:00;00:04:25.5365025;03:46:25.8457346;06:31:45.8194839 [PrintingService.cs@1918] +06/28/2026 03:22:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 302. PrevPreviewWeight=LayerWeight { Index = 301, FillTotalRelative = 0.17751246158861794, FillMaxRelative = 0.40667690876555673, TimeFromPreview = 35.3426938948481, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40667690876555673, PreviewWeight=LayerWeight { Index = 302, FillTotalRelative = 0.17821497980685394, FillMaxRelative = 0.41016290123020344, TimeFromPreview = 34.01411935255677, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.4031022. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531581, LCompressed = 1419236 } [McuMovementClient.cs@491] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627971. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.4694919. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531581, LCompressed = 1419236 } [McuMovementClient.cs@491] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.4870759. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531581, LCompressed = 1419236 } [McuMovementClient.cs@491] +06/28/2026 03:22:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4081.1899386968335, PrevLayerFillRatio=0.40667690876555673: Z1=104.44771302392469, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34158.5570787331, Z2 = 34750 } } [LayerClient.cs@969] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5909015133608 (5909015133608 @ 0) for mcu = 49227.984127 [27/06/2026 00:47:23] (49241.792780066666 sec) to 5910437644373 (from now=5910317644373, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5909015133608 (5909015133608 @ 0) for mcu = 49227.984127 [27/06/2026 00:47:23] (49241.792780066666 sec) to 5910437644373 (from external timestamp, flags=None, requested=5910437644373 (5910437644373 @ 0) for mcu = 49239.838673 [27/06/2026 00:47:35] (49253.64703644167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5909015133608 (5909015133608 @ 0) for mcu = 49227.984127 [27/06/2026 00:47:23] (49241.792780066666 sec) to 5910437644373 (from external timestamp, flags=None, requested=5910437644373 (5910437644373 @ 0) for mcu = 49239.838673 [27/06/2026 00:47:35] (49253.64703644167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:22:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0702660. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.6624375. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531581, LCompressed = 1419236 } [McuMovementClient.cs@491] +06/28/2026 03:22:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:22:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:23:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:23:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 302, Weight=LayerWeight { Index = 302, FillTotalRelative = 0.17821497980685394, FillMaxRelative = 0.41016290123020344, TimeFromPreview = 34.01411935255677, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:23:02 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:23:02 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5912862624641, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:23:02 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5912982627281, flushed existing data. Was Timestamp=0, Now=5912862630318, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:23:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:23:02 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:23:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5910303111952 (5910303111952 @ 0) for mcu = 49238.717577 [27/06/2026 00:47:34] (49252.525932933335 sec) to 5912982673089 (from now=5912862673089, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5910303063952 (1513037584371948 @ 8) for mcu = 49238.717177 [27/06/2026 00:47:34] (49252.525532941014 sec) to 5912982673089 (from now=5912862673089, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5910303063952 (1513037584371948 @ 8) for mcu = 49238.717177 [27/06/2026 00:47:34] (49252.525532941014 sec) to 5912982673089 (from now=5912862673089, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.7063243. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531582, LCompressed = 1419238 } [McuMovementClient.cs@491] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:23:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 302 [PrintingService.cs@2118] +06/28/2026 03:23:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.7183314. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531582, LCompressed = 1419238 } [McuMovementClient.cs@491] +06/28/2026 03:23:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 303, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.65373042826476, Elapsed = 06:48:24.8338115, TimeTotal = 12:00:53.6986113, Remaining = 05:12:28.8647998, Incomplete = False, SoftCount = 566, LayerPrintDone = 303, WeightsDone = 303, WeightDone = 02:27:25.4297310, WeightTotal = 03:50:18.8449346, WeightTotalEstimate = 03:50:18.8449347, LayerRecoatElapsed = 02:06:20.2282918, LayerRecoatDelays = 00:21:24, LayerRecoatPrintLayersElapsed = 01:23:19.2340147, LayerRecoatNoDelayAverage = 00:00:14.7108138, StreamingElapsed = 02:23:22.1015511, ObjectLayerOverheadAverageDuration = 00:00:00.0225908, TimeLayers = 07:14:04.0909797, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:55.4318429, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:22.4057940, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.6622070, JobElapsed = 03:46:48.1764730, JobTotal = 06:31:16.0229787, WeightEstimate = 01:22:53.4152037 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:35:31. coolingEstimate=02:31:55.4318429 [PrintingService.cs@1912] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.65373042826476;StartedAtUtc;06:48:24.8338115;12:00:53.6986113;05:12:28.8647998;False;566;303;303;02:27:25.4297310;03:50:18.8449346;03:50:18.8449347;02:06:20.2282918;00:21:24;01:23:19.2340147;00:00:14.7108138;02:23:22.1015511;00:00:00.0225908;07:14:04.0909797;00:00:00;02:31:55.4318429;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:22.4057940;00:00:00;00:04:25.6622070;03:46:48.1764730;06:31:16.0229787 [PrintingService.cs@1918] +06/28/2026 03:23:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 302. PreviewWeight=LayerWeight { Index = 302, FillTotalRelative = 0.17821497980685394, FillMaxRelative = 0.41016290123020344, TimeFromPreview = 34.01411935255677, EnergyDensityIncreaseFactor = 0 }, FillArea=17724.059692105937, PreviewFillRatio=0.41016290123020344, Results=4, StreamingSeconds (preview) = 34.01411935255677, StreamingSeconds (extrapolated) = 35.61271799625774, StreamingSeconds (no overhead) = 1.0254313 (02:23:22.1015511), LayerElapsedSeconds=22.3326975, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 303, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.653732320220215, Elapsed = 06:48:24.8319027, TimeTotal = 12:00:53.6937976, Remaining = 05:12:28.8618949, Incomplete = False, SoftCount = 566, LayerPrintDone = 303, WeightsDone = 303, WeightDone = 02:27:25.4278222, WeightTotal = 03:50:18.8413689, WeightTotalEstimate = 03:50:18.8413689, LayerRecoatElapsed = 02:06:20.2282918, LayerRecoatDelays = 00:21:24, LayerRecoatPrintLayersElapsed = 01:23:19.2340147, LayerRecoatNoDelayAverage = 00:00:14.7108138, StreamingElapsed = 02:23:22.1015511, ObjectLayerOverheadAverageDuration = 00:00:00.0225845, TimeLayers = 07:14:04.0874140, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:55.4305949, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:22.4057940, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.6622070, JobElapsed = 03:46:48.1793868, JobTotal = 06:31:16.0194130, WeightEstimate = 01:22:53.4135467 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:35:31. coolingEstimate=02:31:55.4305949 [PrintingService.cs@1912] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.653732320220215;StartedAtUtc;06:48:24.8319027;12:00:53.6937976;05:12:28.8618949;False;566;303;303;02:27:25.4278222;03:50:18.8413689;03:50:18.8413689;02:06:20.2282918;00:21:24;01:23:19.2340147;00:00:14.7108138;02:23:22.1015511;00:00:00.0225845;07:14:04.0874140;00:00:00;02:31:55.4305949;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:22.4057940;00:00:00;00:04:25.6622070;03:46:48.1793868;06:31:16.0194130 [PrintingService.cs@1918] +06/28/2026 03:23:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 303. PrevPreviewWeight=LayerWeight { Index = 302, FillTotalRelative = 0.17821497980685394, FillMaxRelative = 0.41016290123020344, TimeFromPreview = 34.01411935255677, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.41016290123020344, PreviewWeight=LayerWeight { Index = 303, FillTotalRelative = 0.1778092700217169, FillMaxRelative = 0.40778279981084065, TimeFromPreview = 35.472794178482665, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.7397909. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531582, LCompressed = 1419238 } [McuMovementClient.cs@491] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634546. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.8016333. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531582, LCompressed = 1419238 } [McuMovementClient.cs@491] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.8134051. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531582, LCompressed = 1419238 } [McuMovementClient.cs@491] +06/28/2026 03:23:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4086.8405324961423, PrevLayerFillRatio=0.41016290123020344: Z1=104.59232565122952, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34263.149404384334, Z2 = 34850 } } [LayerClient.cs@969] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5911657375966 (5911657375966 @ 0) for mcu = 49250.003381 [27/06/2026 00:47:45] (49263.81146638333 sec) to 5913116733970 (from now=5912996733970, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5911657375966 (5911657375966 @ 0) for mcu = 49250.003381 [27/06/2026 00:47:45] (49263.81146638333 sec) to 5913116733970 (from external timestamp, flags=None, requested=5913116733970 (5913116733970 @ 0) for mcu = 49262.165001 [27/06/2026 00:47:58] (49275.972783083336 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5911657375966 (5911657375966 @ 0) for mcu = 49250.003381 [27/06/2026 00:47:45] (49263.81146638333 sec) to 5913116733970 (from external timestamp, flags=None, requested=5913116733970 (5913116733970 @ 0) for mcu = 49262.165001 [27/06/2026 00:47:58] (49275.972783083336 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0782006. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:43.9899450. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531582, LCompressed = 1419238 } [McuMovementClient.cs@491] +06/28/2026 03:23:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:23:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:23:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:23:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 303, Weight=LayerWeight { Index = 303, FillTotalRelative = 0.1778092700217169, FillMaxRelative = 0.40778279981084065, TimeFromPreview = 35.472794178482665, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:23:23 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:23:23 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5915485376971, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:23:23 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5915605381919, flushed existing data. Was Timestamp=0, Now=5915485384873, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:23:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:23:23 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:23:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5912982721089 (5912982721089 @ 0) for mcu = 49261.048180 [27/06/2026 00:47:57] (49274.856009075 sec) to 5915605409548 (from now=5915485409548, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5912982673089 (1513723564310894 @ 8) for mcu = 49261.047780 [27/06/2026 00:47:57] (49274.85560907858 sec) to 5915605409548 (from now=5915485409548, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5912982673089 (1513723564310894 @ 8) for mcu = 49261.047780 [27/06/2026 00:47:57] (49274.85560907858 sec) to 5915605409548 (from now=5915485409548, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:54.5626765. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531583, LCompressed = 1419240 } [McuMovementClient.cs@491] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:23:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 303 [PrintingService.cs@2118] +06/28/2026 03:23:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:54.5738918. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531583, LCompressed = 1419240 } [McuMovementClient.cs@491] +06/28/2026 03:23:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 304, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.75821231222275, Elapsed = 06:48:46.6929638, TimeTotal = 12:00:12.5889182, Remaining = 05:11:25.8959544, Incomplete = False, SoftCount = 566, LayerPrintDone = 304, WeightsDone = 304, WeightDone = 02:27:26.4822494, WeightTotal = 03:49:42.3604557, WeightTotalEstimate = 03:49:42.3604557, LayerRecoatElapsed = 02:06:41.0349257, LayerRecoatDelays = 00:21:27, LayerRecoatPrintLayersElapsed = 01:23:40.0406488, LayerRecoatNoDelayAverage = 00:00:14.7180301, StreamingElapsed = 02:23:23.1333938, ObjectLayerOverheadAverageDuration = 00:00:00.0225845, TimeLayers = 07:13:33.6393552, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:44.7737743, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:23.3439130, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.7704515, JobElapsed = 03:47:10.0309416, JobTotal = 06:30:44.5249907, WeightEstimate = 01:22:15.8782063 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:34:50. coolingEstimate=02:31:44.7737743 [PrintingService.cs@1912] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.75821231222275;StartedAtUtc;06:48:46.6929638;12:00:12.5889182;05:11:25.8959544;False;566;304;304;02:27:26.4822494;03:49:42.3604557;03:49:42.3604557;02:06:41.0349257;00:21:27;01:23:40.0406488;00:00:14.7180301;02:23:23.1333938;00:00:00.0225845;07:13:33.6393552;00:00:00;02:31:44.7737743;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:23.3439130;00:00:00;00:04:25.7704515;03:47:10.0309416;06:30:44.5249907 [PrintingService.cs@1918] +06/28/2026 03:23:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 303. PreviewWeight=LayerWeight { Index = 303, FillTotalRelative = 0.1778092700217169, FillMaxRelative = 0.40778279981084065, TimeFromPreview = 35.472794178482665, EnergyDensityIncreaseFactor = 0 }, FillArea=20026.46510155713, PreviewFillRatio=0.40778279981084065, Results=4, StreamingSeconds (preview) = 35.472794178482665, StreamingSeconds (extrapolated) = 36.512755912381884, StreamingSeconds (no overhead) = 1.0318427 (02:23:23.1333938), LayerElapsedSeconds=21.8517671, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 304, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.75822068558018, Elapsed = 06:48:46.6844822, TimeTotal = 12:00:12.5675998, Remaining = 05:11:25.8831176, Incomplete = False, SoftCount = 566, LayerPrintDone = 304, WeightsDone = 304, WeightDone = 02:27:26.4737678, WeightTotal = 03:49:42.3446643, WeightTotalEstimate = 03:49:42.3446643, LayerRecoatElapsed = 02:06:41.0349257, LayerRecoatDelays = 00:21:27, LayerRecoatPrintLayersElapsed = 01:23:40.0406488, LayerRecoatNoDelayAverage = 00:00:14.7180301, StreamingElapsed = 02:23:23.1333938, ObjectLayerOverheadAverageDuration = 00:00:00.0225566, TimeLayers = 07:13:33.6235638, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:44.7682473, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:23.3439130, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.7704515, JobElapsed = 03:47:10.0328921, JobTotal = 06:30:44.5091993, WeightEstimate = 01:22:15.8708965 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:34:50. coolingEstimate=02:31:44.7682473 [PrintingService.cs@1912] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.75822068558018;StartedAtUtc;06:48:46.6844822;12:00:12.5675998;05:11:25.8831176;False;566;304;304;02:27:26.4737678;03:49:42.3446643;03:49:42.3446643;02:06:41.0349257;00:21:27;01:23:40.0406488;00:00:14.7180301;02:23:23.1333938;00:00:00.0225566;07:13:33.6235638;00:00:00;02:31:44.7682473;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:23.3439130;00:00:00;00:04:25.7704515;03:47:10.0328921;06:30:44.5091993 [PrintingService.cs@1918] +06/28/2026 03:23:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 304. PrevPreviewWeight=LayerWeight { Index = 303, FillTotalRelative = 0.1778092700217169, FillMaxRelative = 0.40778279981084065, TimeFromPreview = 35.472794178482665, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.40778279981084065, PreviewWeight=LayerWeight { Index = 304, FillTotalRelative = 0.178529328470247, FillMaxRelative = 0.41133711926642813, TimeFromPreview = 34.04176657515949, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:54.5919871. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531583, LCompressed = 1419240 } [McuMovementClient.cs@491] +06/28/2026 03:23:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634503. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:54.6560034. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531583, LCompressed = 1419240 } [McuMovementClient.cs@491] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:54.6681053. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531583, LCompressed = 1419240 } [McuMovementClient.cs@491] +06/28/2026 03:23:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4082.9825246380155, PrevLayerFillRatio=0.40778279981084065: Z1=104.49358971792024, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34367.64299410225, Z2 = 34950 } } [LayerClient.cs@969] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5914336422528 (5914336422528 @ 0) for mcu = 49272.329291 [27/06/2026 00:48:08] (49286.1368544 sec) to 5915739224093 (from now=5915619224093, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5914336422528 (5914336422528 @ 0) for mcu = 49272.329291 [27/06/2026 00:48:08] (49286.1368544 sec) to 5915739224093 (from external timestamp, flags=None, requested=5915739224093 (5915739224093 @ 0) for mcu = 49284.019589 [27/06/2026 00:48:19] (49297.82686744167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5914336422528 (5914336422528 @ 0) for mcu = 49272.329291 [27/06/2026 00:48:08] (49286.1368544 sec) to 5915739224093 (from external timestamp, flags=None, requested=5915739224093 (5915739224093 @ 0) for mcu = 49284.019589 [27/06/2026 00:48:19] (49297.82686744167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:23:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0293500 ~ 6 samples/sec, 11 resets, 134 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:23:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0772739. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:23:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11.0772739. Loops = 45. GC duration = 00:00:00.3559876. SinceCollect=00:01:06.2012127. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531583, LCompressed = 1419240 } [McuMovementClient.cs@478] +06/28/2026 03:23:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=123875, gen1=30847, gen2=900, LatencyMode=Interactive, FreeMemory=5743362048, Live=351094464, HeapSizeBytes=355537480, FragmentedBytes=4832088, TotalCommittedBytes=359743488, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:23:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (4 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:23:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:23:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:23:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:23:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 304, Weight=LayerWeight { Index = 304, FillTotalRelative = 0.178529328470247, FillMaxRelative = 0.41133711926642813, TimeFromPreview = 34.04176657515949, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:23:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:23:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5917369925374, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:23:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5917489927436, flushed existing data. Was Timestamp=0, Now=5917369930409, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:23:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5915605457548 (5915605457548 @ 0) for mcu = 49282.904859 [27/06/2026 00:48:18] (49296.71214623333 sec) to 5917489989820 (from now=5917369989820, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5915605409548 (1514394984844489 @ 8) for mcu = 49282.904459 [27/06/2026 00:48:18] (49296.711746239875 sec) to 5917489989820 (from now=5917369989820, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5915605409548 (1514394984844489 @ 8) for mcu = 49282.904459 [27/06/2026 00:48:18] (49296.711746239875 sec) to 5917489989820 (from now=5917369989820, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:04.0641440. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531584, LCompressed = 1419242 } [McuMovementClient.cs@491] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:23:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 304 [PrintingService.cs@2118] +06/28/2026 03:23:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:04.0783128. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531584, LCompressed = 1419242 } [McuMovementClient.cs@491] +06/28/2026 03:23:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 305, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.868181192218934, Elapsed = 06:49:02.3940050, TimeTotal = 11:59:16.6360845, Remaining = 05:10:14.2420795, Incomplete = False, SoftCount = 566, LayerPrintDone = 305, WeightsDone = 305, WeightDone = 02:27:27.5365993, WeightTotal = 03:49:06.8851465, WeightTotalEstimate = 03:49:06.8851465, LayerRecoatElapsed = 02:06:55.6816170, LayerRecoatDelays = 00:21:30, LayerRecoatPrintLayersElapsed = 01:23:54.6873402, LayerRecoatNoDelayAverage = 00:00:14.7108875, StreamingElapsed = 02:23:24.1736687, ObjectLayerOverheadAverageDuration = 00:00:00.0225566, TimeLayers = 07:12:52.1928117, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:30.2674841, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:22.4153750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.6633125, JobElapsed = 03:47:25.7375097, JobTotal = 06:30:04.1141242, WeightEstimate = 01:21:39.3485472 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:33:54. coolingEstimate=02:31:30.2674841 [PrintingService.cs@1912] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.868181192218934;StartedAtUtc;06:49:02.3940050;11:59:16.6360845;05:10:14.2420795;False;566;305;305;02:27:27.5365993;03:49:06.8851465;03:49:06.8851465;02:06:55.6816170;00:21:30;01:23:54.6873402;00:00:14.7108875;02:23:24.1736687;00:00:00.0225566;07:12:52.1928117;00:00:00;02:31:30.2674841;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:22.4153750;00:00:00;00:04:25.6633125;03:47:25.7375097;06:30:04.1141242 [PrintingService.cs@1918] +06/28/2026 03:23:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 304. PreviewWeight=LayerWeight { Index = 304, FillTotalRelative = 0.178529328470247, FillMaxRelative = 0.41133711926642813, TimeFromPreview = 34.04176657515949, EnergyDensityIncreaseFactor = 0 }, FillArea=19961.544960821484, PreviewFillRatio=0.41133711926642813, Results=4, StreamingSeconds (preview) = 34.04176657515949, StreamingSeconds (extrapolated) = 35.49979263800377, StreamingSeconds (no overhead) = 1.0402749 (02:23:24.1736687), LayerElapsedSeconds=15.7061929, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 305, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.86818230267184, Elapsed = 06:49:02.3928764, TimeTotal = 11:59:16.6332572, Remaining = 05:10:14.2403808, Incomplete = False, SoftCount = 566, LayerPrintDone = 305, WeightsDone = 305, WeightDone = 02:27:27.5354707, WeightTotal = 03:49:06.8830522, WeightTotalEstimate = 03:49:06.8830523, LayerRecoatElapsed = 02:06:55.6816170, LayerRecoatDelays = 00:21:30, LayerRecoatPrintLayersElapsed = 01:23:54.6873402, LayerRecoatNoDelayAverage = 00:00:14.7108875, StreamingElapsed = 02:23:24.1736687, ObjectLayerOverheadAverageDuration = 00:00:00.0225529, TimeLayers = 07:12:52.1907174, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:30.2667511, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:22.4153750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.6633125, JobElapsed = 03:47:25.7414670, JobTotal = 06:30:04.1120299, WeightEstimate = 01:21:39.3475816 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:33:54. coolingEstimate=02:31:30.2667511 [PrintingService.cs@1912] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.86818230267184;StartedAtUtc;06:49:02.3928764;11:59:16.6332572;05:10:14.2403808;False;566;305;305;02:27:27.5354707;03:49:06.8830522;03:49:06.8830523;02:06:55.6816170;00:21:30;01:23:54.6873402;00:00:14.7108875;02:23:24.1736687;00:00:00.0225529;07:12:52.1907174;00:00:00;02:31:30.2667511;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:22.4153750;00:00:00;00:04:25.6633125;03:47:25.7414670;06:30:04.1120299 [PrintingService.cs@1918] +06/28/2026 03:23:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 305. PrevPreviewWeight=LayerWeight { Index = 304, FillTotalRelative = 0.178529328470247, FillMaxRelative = 0.41133711926642813, TimeFromPreview = 34.04176657515949, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.41133711926642813, PreviewWeight=LayerWeight { Index = 305, FillTotalRelative = 0.17808462876623646, FillMaxRelative = 0.4090238945224114, TimeFromPreview = 36.19802823687486, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:04.1002974. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531584, LCompressed = 1419242 } [McuMovementClient.cs@491] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631542. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:04.1657467. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531584, LCompressed = 1419242 } [McuMovementClient.cs@491] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:04.1771660. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531584, LCompressed = 1419242 } [McuMovementClient.cs@491] +06/28/2026 03:23:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4088.7438725698275, PrevLayerFillRatio=0.41133711926642813: Z1=104.64103681654879, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34472.284030918796, Z2 = 35050 } } [LayerClient.cs@969] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5916958954686 (5916958954686 @ 0) for mcu = 49294.184298 [27/06/2026 00:48:30] (49307.99128905 sec) to 5917624451267 (from now=5917504451267, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5916958954686 (5916958954686 @ 0) for mcu = 49294.184298 [27/06/2026 00:48:30] (49307.99128905 sec) to 5917624451267 (from external timestamp, flags=None, requested=5917624451267 (5917624451267 @ 0) for mcu = 49299.730242 [27/06/2026 00:48:35] (49313.53709389167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5916958954686 (5916958954686 @ 0) for mcu = 49294.184298 [27/06/2026 00:48:30] (49307.99128905 sec) to 5917624451267 (from external timestamp, flags=None, requested=5917624451267 (5917624451267 @ 0) for mcu = 49299.730242 [27/06/2026 00:48:35] (49313.53709389167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:23:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:23:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.5 [HeaterCheck.cs@111] +06/28/2026 03:23:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0759957. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.3545979. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531584, LCompressed = 1419242 } [McuMovementClient.cs@491] +06/28/2026 03:23:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:24:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:24:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:24:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 305, Weight=LayerWeight { Index = 305, FillTotalRelative = 0.17808462876623646, FillMaxRelative = 0.4090238945224114, TimeFromPreview = 36.19802823687486, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:24:03 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:24:03 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5920190126781, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:24:03 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5920310129573, flushed existing data. Was Timestamp=0, Now=5920190132586, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:24:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:24:03 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:24:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5917490037820 (5917490037820 @ 0) for mcu = 49298.610093 [27/06/2026 00:48:34] (49312.41698183333 sec) to 5920310146526 (from now=5920190146526, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5917489989820 (1514877437393946 @ 8) for mcu = 49298.609693 [27/06/2026 00:48:34] (49312.41658183418 sec) to 5920310146526 (from now=5920190146526, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5917489989820 (1514877437393946 @ 8) for mcu = 49298.609693 [27/06/2026 00:48:34] (49312.41658183418 sec) to 5920310146526 (from now=5920190146526, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.5676369. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531585, LCompressed = 1419244 } [McuMovementClient.cs@491] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:24:04 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 305 [PrintingService.cs@2118] +06/28/2026 03:24:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.5816370. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531585, LCompressed = 1419244 } [McuMovementClient.cs@491] +06/28/2026 03:24:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 306, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.97075520064503, Elapsed = 06:49:25.8959136, TimeTotal = 11:58:40.1865362, Remaining = 05:09:14.2906226, Incomplete = False, SoftCount = 566, LayerPrintDone = 306, WeightsDone = 306, WeightDone = 02:27:28.5892135, WeightTotal = 03:48:30.6945044, WeightTotalEstimate = 03:48:30.6945045, LayerRecoatElapsed = 02:07:18.1309114, LayerRecoatDelays = 00:21:33, LayerRecoatPrintLayersElapsed = 01:24:17.1366344, LayerRecoatNoDelayAverage = 00:00:14.7218815, StreamingElapsed = 02:23:25.2048586, ObjectLayerOverheadAverageDuration = 00:00:00.0225529, TimeLayers = 07:12:25.1931463, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:20.8176012, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:23.8445950, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.8282225, JobElapsed = 03:47:49.2393725, JobTotal = 06:29:35.5203288, WeightEstimate = 01:21:02.1052910 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:33:18. coolingEstimate=02:31:20.8176012 [PrintingService.cs@1912] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.97075520064503;StartedAtUtc;06:49:25.8959136;11:58:40.1865362;05:09:14.2906226;False;566;306;306;02:27:28.5892135;03:48:30.6945044;03:48:30.6945045;02:07:18.1309114;00:21:33;01:24:17.1366344;00:00:14.7218815;02:23:25.2048586;00:00:00.0225529;07:12:25.1931463;00:00:00;02:31:20.8176012;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:23.8445950;00:00:00;00:04:25.8282225;03:47:49.2393725;06:29:35.5203288 [PrintingService.cs@1918] +06/28/2026 03:24:04 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 305. PreviewWeight=LayerWeight { Index = 305, FillTotalRelative = 0.17808462876623646, FillMaxRelative = 0.4090238945224114, TimeFromPreview = 36.19802823687486, EnergyDensityIncreaseFactor = 0 }, FillArea=19247.389508430635, PreviewFillRatio=0.4090238945224114, Results=4, StreamingSeconds (preview) = 36.19802823687486, StreamingSeconds (extrapolated) = 36.21973777935998, StreamingSeconds (no overhead) = 1.0311899 (02:23:25.2048586), LayerElapsedSeconds=23.4961192, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 306, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 56.97075831955851, Elapsed = 06:49:25.8927313, TimeTotal = 11:58:40.1785897, Remaining = 05:09:14.2858584, Incomplete = False, SoftCount = 566, LayerPrintDone = 306, WeightsDone = 306, WeightDone = 02:27:28.5860312, WeightTotal = 03:48:30.6886181, WeightTotalEstimate = 03:48:30.6886181, LayerRecoatElapsed = 02:07:18.1309114, LayerRecoatDelays = 00:21:33, LayerRecoatPrintLayersElapsed = 01:24:17.1366344, LayerRecoatNoDelayAverage = 00:00:14.7218815, StreamingElapsed = 02:23:25.2048586, ObjectLayerOverheadAverageDuration = 00:00:00.0225425, TimeLayers = 07:12:25.1872600, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:20.8155410, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:23.8445950, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:25.8282225, JobElapsed = 03:47:49.2404436, JobTotal = 06:29:35.5144425, WeightEstimate = 01:21:02.1025869 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:33:18. coolingEstimate=02:31:20.8155410 [PrintingService.cs@1912] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 56.97075831955851;StartedAtUtc;06:49:25.8927313;11:58:40.1785897;05:09:14.2858584;False;566;306;306;02:27:28.5860312;03:48:30.6886181;03:48:30.6886181;02:07:18.1309114;00:21:33;01:24:17.1366344;00:00:14.7218815;02:23:25.2048586;00:00:00.0225425;07:12:25.1872600;00:00:00;02:31:20.8155410;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:23.8445950;00:00:00;00:04:25.8282225;03:47:49.2404436;06:29:35.5144425 [PrintingService.cs@1918] +06/28/2026 03:24:04 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 306. PrevPreviewWeight=LayerWeight { Index = 305, FillTotalRelative = 0.17808462876623646, FillMaxRelative = 0.4090238945224114, TimeFromPreview = 36.19802823687486, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4090238945224114, PreviewWeight=LayerWeight { Index = 306, FillTotalRelative = 0.17884491140567085, FillMaxRelative = 0.4124082893354781, TimeFromPreview = 34.95914347888696, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.5963826. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531585, LCompressed = 1419244 } [McuMovementClient.cs@491] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631173. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.6631758. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531585, LCompressed = 1419244 } [McuMovementClient.cs@491] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.6769699. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531585, LCompressed = 1419244 } [McuMovementClient.cs@491] +06/28/2026 03:24:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4084.994267965828, PrevLayerFillRatio=0.4090238945224114: Z1=104.54507518978933, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34576.829106108584, Z2 = 35150 } } [LayerClient.cs@969] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5918844177202 (5918844177202 @ 0) for mcu = 49309.894855 [27/06/2026 00:48:45] (49323.70147668333 sec) to 5920444326752 (from now=5920324326752, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5918844177202 (5918844177202 @ 0) for mcu = 49309.894855 [27/06/2026 00:48:45] (49323.70147668333 sec) to 5920444326752 (from external timestamp, flags=None, requested=5920444326752 (5920444326752 @ 0) for mcu = 49323.229765 [27/06/2026 00:48:59] (49337.03605626667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5918844177202 (5918844177202 @ 0) for mcu = 49309.894855 [27/06/2026 00:48:45] (49323.70147668333 sec) to 5920444326752 (from external timestamp, flags=None, requested=5920444326752 (5920444326752 @ 0) for mcu = 49323.229765 [27/06/2026 00:48:59] (49337.03605626667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0759412. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.8524358. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531585, LCompressed = 1419244 } [McuMovementClient.cs@491] +06/28/2026 03:24:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:24:25 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:24:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0289411 ~ 5.98 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:24:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:24:28 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 306, Weight=LayerWeight { Index = 306, FillTotalRelative = 0.17884491140567085, FillMaxRelative = 0.4124082893354781, TimeFromPreview = 34.95914347888696, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:24:28 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:24:28 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5923225201626, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:24:28 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5923345203749, flushed existing data. Was Timestamp=0, Now=5923225206746, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:24:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:24:28 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:24:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5920310194526 (5920310194526 @ 0) for mcu = 49322.111971 [27/06/2026 00:48:58] (49335.91828771667 sec) to 5923345222108 (from now=5923225222108, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5920310146526 (1515599397510672 @ 8) for mcu = 49322.111571 [27/06/2026 00:48:58] (49335.91788771719 sec) to 5923345222108 (from now=5923225222108, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5920310146526 (1515599397510672 @ 8) for mcu = 49322.111571 [27/06/2026 00:48:58] (49335.91788771719 sec) to 5923345222108 (from now=5923225222108, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.8634698. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531586, LCompressed = 1419246 } [McuMovementClient.cs@491] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:24:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 306 [PrintingService.cs@2118] +06/28/2026 03:24:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.8760685. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531586, LCompressed = 1419246 } [McuMovementClient.cs@491] +06/28/2026 03:24:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 307, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.07113362849944, Elapsed = 06:49:51.1928780, TimeTotal = 11:58:08.6707772, Remaining = 05:08:17.4778992, Incomplete = False, SoftCount = 566, LayerPrintDone = 307, WeightsDone = 307, WeightDone = 02:27:29.6386762, WeightTotal = 03:47:54.7212149, WeightTotalEstimate = 03:47:54.7212149, LayerRecoatElapsed = 02:07:42.3784131, LayerRecoatDelays = 00:21:36, LayerRecoatPrintLayersElapsed = 01:24:41.3841363, LayerRecoatNoDelayAverage = 00:00:14.7369871, StreamingElapsed = 02:23:26.2349611, ObjectLayerOverheadAverageDuration = 00:00:00.0225425, TimeLayers = 07:12:01.8481396, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:12.6468489, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:25.8083230, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.0548065, JobElapsed = 03:48:14.5348377, JobTotal = 06:29:09.9850101, WeightEstimate = 01:20:25.0825387 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:32:46. coolingEstimate=02:31:12.6468489 [PrintingService.cs@1912] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.07113362849944;StartedAtUtc;06:49:51.1928780;11:58:08.6707772;05:08:17.4778992;False;566;307;307;02:27:29.6386762;03:47:54.7212149;03:47:54.7212149;02:07:42.3784131;00:21:36;01:24:41.3841363;00:00:14.7369871;02:23:26.2349611;00:00:00.0225425;07:12:01.8481396;00:00:00;02:31:12.6468489;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:25.8083230;00:00:00;00:04:26.0548065;03:48:14.5348377;06:29:09.9850101 [PrintingService.cs@1918] +06/28/2026 03:24:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 306. PreviewWeight=LayerWeight { Index = 306, FillTotalRelative = 0.17884491140567085, FillMaxRelative = 0.4124082893354781, TimeFromPreview = 34.95914347888696, EnergyDensityIncreaseFactor = 0 }, FillArea=17779.094114926695, PreviewFillRatio=0.4124082893354781, Results=4, StreamingSeconds (preview) = 34.95914347888696, StreamingSeconds (extrapolated) = 35.997505678610814, StreamingSeconds (no overhead) = 1.0301025 (02:23:26.2349611), LayerElapsedSeconds=25.2948401, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 307, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.071137762619394, Elapsed = 06:49:51.1886413, TimeTotal = 11:58:08.6602324, Remaining = 05:08:17.4715911, Incomplete = False, SoftCount = 566, LayerPrintDone = 307, WeightsDone = 307, WeightDone = 02:27:29.6344395, WeightTotal = 03:47:54.7134040, WeightTotalEstimate = 03:47:54.7134041, LayerRecoatElapsed = 02:07:42.3784131, LayerRecoatDelays = 00:21:36, LayerRecoatPrintLayersElapsed = 01:24:41.3841363, LayerRecoatNoDelayAverage = 00:00:14.7369871, StreamingElapsed = 02:23:26.2349611, ObjectLayerOverheadAverageDuration = 00:00:00.0225287, TimeLayers = 07:12:01.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:12.6441150, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:25.8083230, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.0548065, JobElapsed = 03:48:14.5381809, JobTotal = 06:29:09.9771992, WeightEstimate = 01:20:25.0789646 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:32:46. coolingEstimate=02:31:12.6441150 [PrintingService.cs@1912] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.071137762619394;StartedAtUtc;06:49:51.1886413;11:58:08.6602324;05:08:17.4715911;False;566;307;307;02:27:29.6344395;03:47:54.7134040;03:47:54.7134041;02:07:42.3784131;00:21:36;01:24:41.3841363;00:00:14.7369871;02:23:26.2349611;00:00:00.0225287;07:12:01.8403287;00:00:00;02:31:12.6441150;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:25.8083230;00:00:00;00:04:26.0548065;03:48:14.5381809;06:29:09.9771992 [PrintingService.cs@1918] +06/28/2026 03:24:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 307. PrevPreviewWeight=LayerWeight { Index = 306, FillTotalRelative = 0.17884491140567085, FillMaxRelative = 0.4124082893354781, TimeFromPreview = 34.95914347888696, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4124082893354781, PreviewWeight=LayerWeight { Index = 307, FillTotalRelative = 0.17864378135215123, FillMaxRelative = 0.4102817918721042, TimeFromPreview = 35.68524539018088, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.8929199. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531586, LCompressed = 1419246 } [McuMovementClient.cs@491] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633911. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.9563323. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531586, LCompressed = 1419246 } [McuMovementClient.cs@491] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.9701344. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531586, LCompressed = 1419246 } [McuMovementClient.cs@491] +06/28/2026 03:24:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4090.480177800422, PrevLayerFillRatio=0.4124082893354781: Z1=104.68547314839593, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34681.51457925698, Z2 = 35250 } } [LayerClient.cs@969] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5921664016473 (5921664016473 @ 0) for mcu = 49333.394082 [27/06/2026 00:49:09] (49347.200137275 sec) to 5923479443565 (from now=5923359443565, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5921664016473 (5921664016473 @ 0) for mcu = 49333.394082 [27/06/2026 00:49:09] (49347.200137275 sec) to 5923479443565 (from external timestamp, flags=None, requested=5923479443565 (5923479443565 @ 0) for mcu = 49348.523012 [27/06/2026 00:49:24] (49362.328696375 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5921664016473 (5921664016473 @ 0) for mcu = 49333.394082 [27/06/2026 00:49:09] (49347.200137275 sec) to 5923479443565 (from external timestamp, flags=None, requested=5923479443565 (5923479443565 @ 0) for mcu = 49348.523012 [27/06/2026 00:49:24] (49362.328696375 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:24:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0720138. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:24:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11.0720138. Loops = 45. GC duration = 00:00:00.3522947. SinceCollect=00:01:04.4974933. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531586, LCompressed = 1419246 } [McuMovementClient.cs@478] +06/28/2026 03:24:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=124014, gen1=30869, gen2=901, LatencyMode=Interactive, FreeMemory=5732794368, Live=352167064, HeapSizeBytes=358758224, FragmentedBytes=7158832, TotalCommittedBytes=363839488, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:24:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:24:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (81 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:24:45 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:24:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:24:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 307, Weight=LayerWeight { Index = 307, FillTotalRelative = 0.17864378135215123, FillMaxRelative = 0.4102817918721042, TimeFromPreview = 35.68524539018088, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:24:48 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:24:48 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5925606673500, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:24:48 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5925726675646, flushed existing data. Was Timestamp=0, Now=5925606678571, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:24:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:24:48 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:24:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5923345270108 (5923345270108 @ 0) for mcu = 49347.404868 [27/06/2026 00:49:23] (49361.21058423333 sec) to 5925726692244 (from now=5925606692244, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5923345222108 (1516376376859854 @ 8) for mcu = 49347.404468 [27/06/2026 00:49:23] (49361.21018424004 sec) to 5925726692244 (from now=5925606692244, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5923345222108 (1516376376859854 @ 8) for mcu = 49347.404468 [27/06/2026 00:49:23] (49361.21018424004 sec) to 5925726692244 (from now=5925606692244, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.2081607. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531587, LCompressed = 1419248 } [McuMovementClient.cs@491] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:24:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 307 [PrintingService.cs@2118] +06/28/2026 03:24:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.2188722. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531587, LCompressed = 1419248 } [McuMovementClient.cs@491] +06/28/2026 03:24:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 308, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.17917711604872, Elapsed = 06:50:11.0342623, TimeTotal = 11:57:21.9525142, Remaining = 05:07:10.9182519, Incomplete = False, SoftCount = 566, LayerPrintDone = 308, WeightsDone = 308, WeightDone = 02:27:30.6865989, WeightTotal = 03:47:18.0753399, WeightTotalEstimate = 03:47:18.0753400, LayerRecoatElapsed = 02:08:01.1718747, LayerRecoatDelays = 00:21:39, LayerRecoatPrintLayersElapsed = 01:25:00.1775980, LayerRecoatNoDelayAverage = 00:00:14.7394270, StreamingElapsed = 02:23:27.2645918, ObjectLayerOverheadAverageDuration = 00:00:00.0225287, TimeLayers = 07:11:27.2420189, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:00.5347066, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:26.1255100, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.0914050, JobElapsed = 03:48:34.3743395, JobTotal = 06:28:35.0251039, WeightEstimate = 01:19:47.3887411 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:32:00. coolingEstimate=02:31:00.5347066 [PrintingService.cs@1912] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.17917711604872;StartedAtUtc;06:50:11.0342623;11:57:21.9525142;05:07:10.9182519;False;566;308;308;02:27:30.6865989;03:47:18.0753399;03:47:18.0753400;02:08:01.1718747;00:21:39;01:25:00.1775980;00:00:14.7394270;02:23:27.2645918;00:00:00.0225287;07:11:27.2420189;00:00:00;02:31:00.5347066;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:26.1255100;00:00:00;00:04:26.0914050;03:48:34.3743395;06:28:35.0251039 [PrintingService.cs@1918] +06/28/2026 03:24:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 307. PreviewWeight=LayerWeight { Index = 307, FillTotalRelative = 0.17864378135215123, FillMaxRelative = 0.4102817918721042, TimeFromPreview = 35.68524539018088, EnergyDensityIncreaseFactor = 0 }, FillArea=20083.48113415674, PreviewFillRatio=0.4102817918721042, Results=4, StreamingSeconds (preview) = 35.68524539018088, StreamingSeconds (extrapolated) = 36.66769481188401, StreamingSeconds (no overhead) = 1.0296307 (02:23:27.2645918), LayerElapsedSeconds=19.835809, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 308, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.17918349523532, Elapsed = 06:50:11.0277020, TimeTotal = 11:57:21.9362390, Remaining = 05:07:10.9085370, Incomplete = False, SoftCount = 566, LayerPrintDone = 308, WeightsDone = 308, WeightDone = 02:27:30.6800386, WeightTotal = 03:47:18.0632842, WeightTotalEstimate = 03:47:18.0632842, LayerRecoatElapsed = 02:08:01.1718747, LayerRecoatDelays = 00:21:39, LayerRecoatPrintLayersElapsed = 01:25:00.1775980, LayerRecoatNoDelayAverage = 00:00:14.7394270, StreamingElapsed = 02:23:27.2645918, ObjectLayerOverheadAverageDuration = 00:00:00.0225074, TimeLayers = 07:11:27.2299632, CoolingElapsed = 00:00:00, CoolingEstimate = 02:31:00.5304871, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:26.1255100, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.0914050, JobElapsed = 03:48:34.3761521, JobTotal = 06:28:35.0130482, WeightEstimate = 01:19:47.3832456 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:32:00. coolingEstimate=02:31:00.5304871 [PrintingService.cs@1912] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.17918349523532;StartedAtUtc;06:50:11.0277020;11:57:21.9362390;05:07:10.9085370;False;566;308;308;02:27:30.6800386;03:47:18.0632842;03:47:18.0632842;02:08:01.1718747;00:21:39;01:25:00.1775980;00:00:14.7394270;02:23:27.2645918;00:00:00.0225074;07:11:27.2299632;00:00:00;02:31:00.5304871;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:26.1255100;00:00:00;00:04:26.0914050;03:48:34.3761521;06:28:35.0130482 [PrintingService.cs@1918] +06/28/2026 03:24:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 308. PrevPreviewWeight=LayerWeight { Index = 307, FillTotalRelative = 0.17864378135215123, FillMaxRelative = 0.4102817918721042, TimeFromPreview = 35.68524539018088, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4102817918721042, PreviewWeight=LayerWeight { Index = 308, FillTotalRelative = 0.17941644856662062, FillMaxRelative = 0.41366685633697386, TimeFromPreview = 34.470410805449255, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.2357946. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531587, LCompressed = 1419248 } [McuMovementClient.cs@491] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634440. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.2986719. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531587, LCompressed = 1419248 } [McuMovementClient.cs@491] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.3119081. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531587, LCompressed = 1419248 } [McuMovementClient.cs@491] +06/28/2026 03:24:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4087.0332474060947, PrevLayerFillRatio=0.4102817918721042: Z1=104.59725770092886, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34786.11183695791, Z2 = 35350 } } [LayerClient.cs@969] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5924699142848 (5924699142848 @ 0) for mcu = 49358.687400 [27/06/2026 00:49:34] (49372.49285706667 sec) to 5925860102718 (from now=5925740102718, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5924699142848 (5924699142848 @ 0) for mcu = 49358.687400 [27/06/2026 00:49:34] (49372.49285706667 sec) to 5925860102718 (from external timestamp, flags=None, requested=5925860102718 (5925860102718 @ 0) for mcu = 49368.362299 [27/06/2026 00:49:44] (49382.16752265 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5924699142848 (5924699142848 @ 0) for mcu = 49358.687400 [27/06/2026 00:49:34] (49372.49285706667 sec) to 5925860102718 (from external timestamp, flags=None, requested=5925860102718 (5925860102718 @ 0) for mcu = 49368.362299 [27/06/2026 00:49:44] (49382.16752265 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:24:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0783318. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.4873054. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531587, LCompressed = 1419248 } [McuMovementClient.cs@491] +06/28/2026 03:25:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:25:07 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:25:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:25:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 308, Weight=LayerWeight { Index = 308, FillTotalRelative = 0.17941644856662062, FillMaxRelative = 0.41366685633697386, TimeFromPreview = 34.470410805449255, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:25:10 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:25:10 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5928260272907, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:25:10 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5928380274950, flushed existing data. Was Timestamp=0, Now=5928260277874, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:25:10 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5925726740244 (5925726740244 @ 0) for mcu = 49367.250933 [27/06/2026 00:49:43] (49381.0561687 sec) to 5928380298558 (from now=5928260298558, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5925726692244 (1516986033214681 @ 8) for mcu = 49367.250533 [27/06/2026 00:49:43] (49381.05576870706 sec) to 5928380298558 (from now=5928260298558, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5925726692244 (1516986033214681 @ 8) for mcu = 49367.250533 [27/06/2026 00:49:43] (49381.05576870706 sec) to 5928380298558 (from now=5928260298558, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3235492. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531588, LCompressed = 1419250 } [McuMovementClient.cs@491] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:25:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 308 [PrintingService.cs@2118] +06/28/2026 03:25:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3345590. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531588, LCompressed = 1419250 } [McuMovementClient.cs@491] +06/28/2026 03:25:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 309, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.28295743535027, Elapsed = 06:50:33.1509633, TimeTotal = 11:56:42.5823843, Remaining = 05:06:09.4314210, Incomplete = False, SoftCount = 566, LayerPrintDone = 309, WeightsDone = 309, WeightDone = 02:27:31.7275353, WeightTotal = 03:46:42.4856083, WeightTotalEstimate = 03:46:42.4856083, LayerRecoatElapsed = 02:08:22.2476393, LayerRecoatDelays = 00:21:42, LayerRecoatPrintLayersElapsed = 01:25:21.2533626, LayerRecoatNoDelayAverage = 00:00:14.7471144, StreamingElapsed = 02:23:28.2895811, ObjectLayerOverheadAverageDuration = 00:00:00.0225074, TimeLayers = 07:10:58.0789597, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:50.3276359, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:27.1248720, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.2067160, JobElapsed = 03:48:56.4904423, JobTotal = 06:28:04.7473717, WeightEstimate = 01:19:10.7580730 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:31:20. coolingEstimate=02:30:50.3276359 [PrintingService.cs@1912] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.28295743535027;StartedAtUtc;06:50:33.1509633;11:56:42.5823843;05:06:09.4314210;False;566;309;309;02:27:31.7275353;03:46:42.4856083;03:46:42.4856083;02:08:22.2476393;00:21:42;01:25:21.2533626;00:00:14.7471144;02:23:28.2895811;00:00:00.0225074;07:10:58.0789597;00:00:00;02:30:50.3276359;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:27.1248720;00:00:00;00:04:26.2067160;03:48:56.4904423;06:28:04.7473717 [PrintingService.cs@1918] +06/28/2026 03:25:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 308. PreviewWeight=LayerWeight { Index = 308, FillTotalRelative = 0.17941644856662062, FillMaxRelative = 0.41366685633697386, TimeFromPreview = 34.470410805449255, EnergyDensityIncreaseFactor = 0 }, FillArea=20016.505093442873, PreviewFillRatio=0.41366685633697386, Results=4, StreamingSeconds (preview) = 34.470410805449255, StreamingSeconds (extrapolated) = 35.60266513023112, StreamingSeconds (no overhead) = 1.0249893 (02:23:28.2895811), LayerElapsedSeconds=22.1152159, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 309, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.282963301336856, Elapsed = 06:50:33.1449069, TimeTotal = 11:56:42.5674079, Remaining = 05:06:09.4225010, Incomplete = False, SoftCount = 566, LayerPrintDone = 309, WeightsDone = 309, WeightDone = 02:27:31.7214789, WeightTotal = 03:46:42.4745147, WeightTotalEstimate = 03:46:42.4745147, LayerRecoatElapsed = 02:08:22.2476393, LayerRecoatDelays = 00:21:42, LayerRecoatPrintLayersElapsed = 01:25:21.2533626, LayerRecoatNoDelayAverage = 00:00:14.7471144, StreamingElapsed = 02:23:28.2895811, ObjectLayerOverheadAverageDuration = 00:00:00.0224878, TimeLayers = 07:10:58.0678661, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:50.3237531, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:27.1248720, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.2067160, JobElapsed = 03:48:56.4928006, JobTotal = 06:28:04.7362781, WeightEstimate = 01:19:10.7530358 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:31:20. coolingEstimate=02:30:50.3237531 [PrintingService.cs@1912] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.282963301336856;StartedAtUtc;06:50:33.1449069;11:56:42.5674079;05:06:09.4225010;False;566;309;309;02:27:31.7214789;03:46:42.4745147;03:46:42.4745147;02:08:22.2476393;00:21:42;01:25:21.2533626;00:00:14.7471144;02:23:28.2895811;00:00:00.0224878;07:10:58.0678661;00:00:00;02:30:50.3237531;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:27.1248720;00:00:00;00:04:26.2067160;03:48:56.4928006;06:28:04.7362781 [PrintingService.cs@1918] +06/28/2026 03:25:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 309. PrevPreviewWeight=LayerWeight { Index = 308, FillTotalRelative = 0.17941644856662062, FillMaxRelative = 0.41366685633697386, TimeFromPreview = 34.470410805449255, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.41366685633697386, PreviewWeight=LayerWeight { Index = 309, FillTotalRelative = 0.17915635275649425, FillMaxRelative = 0.41134210051513426, TimeFromPreview = 35.95636367056028, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3521895. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531588, LCompressed = 1419250 } [McuMovementClient.cs@491] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631011. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.4150203. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531588, LCompressed = 1419250 } [McuMovementClient.cs@491] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.4261911. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531588, LCompressed = 1419250 } [McuMovementClient.cs@491] +06/28/2026 03:25:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4092.5202427078452, PrevLayerFillRatio=0.41366685633697386: Z1=104.7376834393163, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34890.84952039723, Z2 = 35450 } } [LayerClient.cs@969] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5927079830439 (5927079830439 @ 0) for mcu = 49378.526949 [27/06/2026 00:49:54] (49392.331920325 sec) to 5928513754198 (from now=5928393754198, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5927079830439 (5927079830439 @ 0) for mcu = 49378.526949 [27/06/2026 00:49:54] (49392.331920325 sec) to 5928513754198 (from external timestamp, flags=None, requested=5928513754198 (5928513754198 @ 0) for mcu = 49390.476603 [27/06/2026 00:50:06] (49404.281284983335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5927079830439 (5927079830439 @ 0) for mcu = 49378.526949 [27/06/2026 00:49:54] (49392.331920325 sec) to 5928513754198 (from external timestamp, flags=None, requested=5928513754198 (5928513754198 @ 0) for mcu = 49390.476603 [27/06/2026 00:50:06] (49404.281284983335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:25:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0763024. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.5990615. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531588, LCompressed = 1419250 } [McuMovementClient.cs@491] +06/28/2026 03:25:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:25:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0743091 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:25:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:25:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:25:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 309, Weight=LayerWeight { Index = 309, FillTotalRelative = 0.17915635275649425, FillMaxRelative = 0.41134210051513426, TimeFromPreview = 35.95636367056028, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:25:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:25:35 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5931265271160, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:25:35 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5931385274580, flushed existing data. Was Timestamp=0, Now=5931265277363, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:25:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:25:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:25:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5928380346558 (5928380346558 @ 0) for mcu = 49389.364791 [27/06/2026 00:50:05] (49403.16955465 sec) to 5931385291711 (from now=5931265291711, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5928380298558 (1517665356430978 @ 8) for mcu = 49389.364391 [27/06/2026 00:50:05] (49403.169154654235 sec) to 5931385291711 (from now=5931265291711, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5928380298558 (1517665356430978 @ 8) for mcu = 49389.364391 [27/06/2026 00:50:05] (49403.169154654235 sec) to 5931385291711 (from now=5931265291711, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.3631621. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531589, LCompressed = 1419252 } [McuMovementClient.cs@491] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:25:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 309 [PrintingService.cs@2118] +06/28/2026 03:25:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.3744366. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531589, LCompressed = 1419252 } [McuMovementClient.cs@491] +06/28/2026 03:25:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 310, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.38600412548476, Elapsed = 06:50:58.1907520, TimeTotal = 11:56:08.9976289, Remaining = 05:05:10.8068769, Incomplete = False, SoftCount = 566, LayerPrintDone = 310, WeightsDone = 310, WeightDone = 02:27:32.7731809, WeightTotal = 03:46:05.6022221, WeightTotalEstimate = 03:46:05.6022221, LayerRecoatElapsed = 02:08:46.2417824, LayerRecoatDelays = 00:21:45, LayerRecoatPrintLayersElapsed = 01:25:45.2475056, LayerRecoatNoDelayAverage = 00:00:14.7614754, StreamingElapsed = 02:23:29.3187953, ObjectLayerOverheadAverageDuration = 00:00:00.0224878, TimeLayers = 07:10:33.2013631, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:41.6204771, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:28.9918020, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.4221310, JobElapsed = 03:49:21.5300625, JobTotal = 06:27:37.7874301, WeightEstimate = 01:18:32.8290412 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:30:47. coolingEstimate=02:30:41.6204771 [PrintingService.cs@1912] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.38600412548476;StartedAtUtc;06:50:58.1907520;11:56:08.9976289;05:05:10.8068769;False;566;310;310;02:27:32.7731809;03:46:05.6022221;03:46:05.6022221;02:08:46.2417824;00:21:45;01:25:45.2475056;00:00:14.7614754;02:23:29.3187953;00:00:00.0224878;07:10:33.2013631;00:00:00;02:30:41.6204771;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:28.9918020;00:00:00;00:04:26.4221310;03:49:21.5300625;06:27:37.7874301 [PrintingService.cs@1918] +06/28/2026 03:25:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 309. PreviewWeight=LayerWeight { Index = 309, FillTotalRelative = 0.17915635275649425, FillMaxRelative = 0.41134210051513426, TimeFromPreview = 35.95636367056028, EnergyDensityIncreaseFactor = 0 }, FillArea=19308.434901980305, PreviewFillRatio=0.41134210051513426, Results=4, StreamingSeconds (preview) = 35.95636367056028, StreamingSeconds (extrapolated) = 36.90150678319789, StreamingSeconds (no overhead) = 1.0292142 (02:23:29.3187953), LayerElapsedSeconds=25.03728, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 310, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.38601118234477, Elapsed = 06:50:58.1834359, TimeTotal = 11:56:08.9795960, Remaining = 05:05:10.7961601, Incomplete = False, SoftCount = 566, LayerPrintDone = 310, WeightsDone = 310, WeightDone = 02:27:32.7658648, WeightTotal = 03:46:05.5888644, WeightTotalEstimate = 03:46:05.5888645, LayerRecoatElapsed = 02:08:46.2417824, LayerRecoatDelays = 00:21:45, LayerRecoatPrintLayersElapsed = 01:25:45.2475056, LayerRecoatNoDelayAverage = 00:00:14.7614754, StreamingElapsed = 02:23:29.3187953, ObjectLayerOverheadAverageDuration = 00:00:00.0224642, TimeLayers = 07:10:33.1880054, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:41.6158019, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:28.9918020, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.4221310, JobElapsed = 03:49:21.5317261, JobTotal = 06:27:37.7740724, WeightEstimate = 01:18:32.8229997 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:30:47. coolingEstimate=02:30:41.6158019 [PrintingService.cs@1912] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.38601118234477;StartedAtUtc;06:50:58.1834359;11:56:08.9795960;05:05:10.7961601;False;566;310;310;02:27:32.7658648;03:46:05.5888644;03:46:05.5888645;02:08:46.2417824;00:21:45;01:25:45.2475056;00:00:14.7614754;02:23:29.3187953;00:00:00.0224642;07:10:33.1880054;00:00:00;02:30:41.6158019;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:28.9918020;00:00:00;00:04:26.4221310;03:49:21.5317261;06:27:37.7740724 [PrintingService.cs@1918] +06/28/2026 03:25:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 310. PrevPreviewWeight=LayerWeight { Index = 309, FillTotalRelative = 0.17915635275649425, FillMaxRelative = 0.41134210051513426, TimeFromPreview = 35.95636367056028, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.41134210051513426, PreviewWeight=LayerWeight { Index = 310, FillTotalRelative = 0.17994701677240219, FillMaxRelative = 0.41480068029793077, TimeFromPreview = 35.1223087832172, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.3968142. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531589, LCompressed = 1419252 } [McuMovementClient.cs@491] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633814. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.4587941. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531589, LCompressed = 1419252 } [McuMovementClient.cs@491] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.4707815. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531589, LCompressed = 1419252 } [McuMovementClient.cs@491] +06/28/2026 03:25:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4088.751946888214, PrevLayerFillRatio=0.41134210051513426: Z1=104.64124345826417, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 34995.490763855494, Z2 = 35550 } } [LayerClient.cs@969] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5929733478341 (5929733478341 @ 0) for mcu = 49400.641151 [27/06/2026 00:50:16] (49414.44565284166 sec) to 5931519042305 (from now=5931399042305, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5929733478341 (5929733478341 @ 0) for mcu = 49400.641151 [27/06/2026 00:50:16] (49414.44565284166 sec) to 5931519042305 (from external timestamp, flags=None, requested=5931519042305 (5931519042305 @ 0) for mcu = 49415.521196 [27/06/2026 00:50:31] (49429.325352541666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5929733478341 (5929733478341 @ 0) for mcu = 49400.641151 [27/06/2026 00:50:16] (49414.44565284166 sec) to 5931519042305 (from external timestamp, flags=None, requested=5931519042305 (5931519042305 @ 0) for mcu = 49415.521196 [27/06/2026 00:50:31] (49429.325352541666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:25:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134 [HeaterCheck.cs@111] +06/28/2026 03:25:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0744669. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:25:48 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (21 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:25:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11.0744669. Loops = 45. GC duration = 00:00:00.3562344. SinceCollect=00:01:07.0029629. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531589, LCompressed = 1419252 } [McuMovementClient.cs@478] +06/28/2026 03:25:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=124137, gen1=30887, gen2=902, LatencyMode=Interactive, FreeMemory=5740314624, Live=350996480, HeapSizeBytes=358642776, FragmentedBytes=8255104, TotalCommittedBytes=364609536, PinnedObjectsCount=26, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:25:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:25:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:25:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:25:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 310, Weight=LayerWeight { Index = 310, FillTotalRelative = 0.17994701677240219, FillMaxRelative = 0.41480068029793077, TimeFromPreview = 35.1223087832172, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:25:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:25:55 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5933618668260, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:25:55 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5933738688154, flushed existing data. Was Timestamp=0, Now=5933618691018, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:25:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:25:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:25:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5931385339711 (5931385339711 @ 0) for mcu = 49414.407020 [27/06/2026 00:50:30] (49428.21116425833 sec) to 5933738724228 (from now=5933618724228, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5931385291711 (1518434634678189 @ 8) for mcu = 49414.406620 [27/06/2026 00:50:30] (49428.21076426397 sec) to 5933738724228 (from now=5933618724228, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5931385291711 (1518434634678189 @ 8) for mcu = 49414.406620 [27/06/2026 00:50:30] (49428.21076426397 sec) to 5933738724228 (from now=5933618724228, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:07.9721885. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531590, LCompressed = 1419254 } [McuMovementClient.cs@491] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:25:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 310 [PrintingService.cs@2118] +06/28/2026 03:25:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:07.9828395. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531590, LCompressed = 1419254 } [McuMovementClient.cs@491] +06/28/2026 03:25:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 311, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.494135109724766, Elapsed = 06:51:17.7990654, TimeTotal = 11:55:22.2894097, Remaining = 05:04:04.4903443, Incomplete = False, SoftCount = 566, LayerPrintDone = 311, WeightsDone = 311, WeightDone = 02:27:33.8136237, WeightTotal = 03:45:29.4573461, WeightTotalEstimate = 03:45:29.4573462, LayerRecoatElapsed = 02:09:04.8096530, LayerRecoatDelays = 00:21:48, LayerRecoatPrintLayersElapsed = 01:26:03.8153761, LayerRecoatNoDelayAverage = 00:00:14.7633249, StreamingElapsed = 02:23:30.3440900, ObjectLayerOverheadAverageDuration = 00:00:00.0224642, TimeLayers = 07:09:58.6026822, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:29.5109388, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:29.2322370, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.4498735, JobElapsed = 03:49:41.1417458, JobTotal = 06:27:02.9205717, WeightEstimate = 01:17:55.6437225 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:30:00. coolingEstimate=02:30:29.5109388 [PrintingService.cs@1912] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.494135109724766;StartedAtUtc;06:51:17.7990654;11:55:22.2894097;05:04:04.4903443;False;566;311;311;02:27:33.8136237;03:45:29.4573461;03:45:29.4573462;02:09:04.8096530;00:21:48;01:26:03.8153761;00:00:14.7633249;02:23:30.3440900;00:00:00.0224642;07:09:58.6026822;00:00:00;02:30:29.5109388;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:29.2322370;00:00:00;00:04:26.4498735;03:49:41.1417458;06:27:02.9205717 [PrintingService.cs@1918] +06/28/2026 03:25:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 310. PreviewWeight=LayerWeight { Index = 310, FillTotalRelative = 0.17994701677240219, FillMaxRelative = 0.41480068029793077, TimeFromPreview = 35.1223087832172, EnergyDensityIncreaseFactor = 0 }, FillArea=17856.569014382054, PreviewFillRatio=0.41480068029793077, Results=4, StreamingSeconds (preview) = 35.1223087832172, StreamingSeconds (extrapolated) = 36.15681304389946, StreamingSeconds (no overhead) = 1.0252947 (02:23:30.3440900), LayerElapsedSeconds=19.6062758, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 311, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.494138188920154, Elapsed = 06:51:17.7958621, TimeTotal = 11:55:22.2815394, Remaining = 05:04:04.4856773, Incomplete = False, SoftCount = 566, LayerPrintDone = 311, WeightsDone = 311, WeightDone = 02:27:33.8104204, WeightTotal = 03:45:29.4515163, WeightTotalEstimate = 03:45:29.4515164, LayerRecoatElapsed = 02:09:04.8096530, LayerRecoatDelays = 00:21:48, LayerRecoatPrintLayersElapsed = 01:26:03.8153761, LayerRecoatNoDelayAverage = 00:00:14.7633249, StreamingElapsed = 02:23:30.3440900, ObjectLayerOverheadAverageDuration = 00:00:00.0224539, TimeLayers = 07:09:58.5968524, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:29.5088983, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:29.2322370, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.4498735, JobElapsed = 03:49:41.1433901, JobTotal = 06:27:02.9147419, WeightEstimate = 01:17:55.6410960 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:30:00. coolingEstimate=02:30:29.5088983 [PrintingService.cs@1912] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.494138188920154;StartedAtUtc;06:51:17.7958621;11:55:22.2815394;05:04:04.4856773;False;566;311;311;02:27:33.8104204;03:45:29.4515163;03:45:29.4515164;02:09:04.8096530;00:21:48;01:26:03.8153761;00:00:14.7633249;02:23:30.3440900;00:00:00.0224539;07:09:58.5968524;00:00:00;02:30:29.5088983;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:29.2322370;00:00:00;00:04:26.4498735;03:49:41.1433901;06:27:02.9147419 [PrintingService.cs@1918] +06/28/2026 03:25:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 311. PrevPreviewWeight=LayerWeight { Index = 310, FillTotalRelative = 0.17994701677240219, FillMaxRelative = 0.41480068029793077, TimeFromPreview = 35.1223087832172, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.41480068029793077, PreviewWeight=LayerWeight { Index = 311, FillTotalRelative = 0.1797219816933274, FillMaxRelative = 0.41256740464185493, TimeFromPreview = 35.78099339832258, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:07.9998401. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531590, LCompressed = 1419254 } [McuMovementClient.cs@491] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633527. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0635482. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531590, LCompressed = 1419254 } [McuMovementClient.cs@491] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0762157. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531590, LCompressed = 1419254 } [McuMovementClient.cs@491] +06/28/2026 03:25:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4094.358106302866, PrevLayerFillRatio=0.41480068029793077: Z1=104.78471890010918, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35100.275482755605, Z2 = 35650 } } [LayerClient.cs@969] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5932738768240 (5932738768240 @ 0) for mcu = 49425.685839 [27/06/2026 00:50:41] (49439.489735333336 sec) to 5933872045054 (from now=5933752045054, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5932738768240 (5932738768240 @ 0) for mcu = 49425.685839 [27/06/2026 00:50:41] (49439.489735333336 sec) to 5933872045054 (from external timestamp, flags=None, requested=5933872045054 (5933872045054 @ 0) for mcu = 49435.130034 [27/06/2026 00:50:51] (49448.933708783334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5932738768240 (5932738768240 @ 0) for mcu = 49425.685839 [27/06/2026 00:50:41] (49439.489735333336 sec) to 5933872045054 (from external timestamp, flags=None, requested=5933872045054 (5933872045054 @ 0) for mcu = 49435.130034 [27/06/2026 00:50:51] (49448.933708783334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:25:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0797799. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.2517782. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531590, LCompressed = 1419254 } [McuMovementClient.cs@491] +06/28/2026 03:26:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:26:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:26:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:26:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 311, Weight=LayerWeight { Index = 311, FillTotalRelative = 0.1797219816933274, FillMaxRelative = 0.41256740464185493, TimeFromPreview = 35.78099339832258, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:26:18 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5936401325895, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:26:18 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5936521331050, flushed existing data. Was Timestamp=0, Now=5936401333844, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:26:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:26:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:26:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:26:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5933738772228 (5933738772228 @ 0) for mcu = 49434.019377 [27/06/2026 00:50:49] (49447.8231019 sec) to 5936521394694 (from now=5936401394694, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5933738724228 (1519037113402587 @ 8) for mcu = 49434.018977 [27/06/2026 00:50:49] (49447.82270190713 sec) to 5936521394694 (from now=5936401394694, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5933738724228 (1519037113402587 @ 8) for mcu = 49434.018977 [27/06/2026 00:50:49] (49447.82270190713 sec) to 5936521394694 (from now=5936401394694, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1647291. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531591, LCompressed = 1419256 } [McuMovementClient.cs@491] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:26:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 311 [PrintingService.cs@2118] +06/28/2026 03:26:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1762658. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531591, LCompressed = 1419256 } [McuMovementClient.cs@491] +06/28/2026 03:26:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 312, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.59963942101416, Elapsed = 06:51:40.9968637, TimeTotal = 11:54:43.9435663, Remaining = 05:03:02.9467026, Incomplete = False, SoftCount = 566, LayerPrintDone = 312, WeightsDone = 312, WeightDone = 02:27:34.8647297, WeightTotal = 03:44:52.6674407, WeightTotalEstimate = 03:44:52.6674408, LayerRecoatElapsed = 02:09:26.9563453, LayerRecoatDelays = 00:21:51, LayerRecoatPrintLayersElapsed = 01:26:25.9620686, LayerRecoatNoDelayAverage = 00:00:14.7733555, StreamingElapsed = 02:23:31.3759454, ObjectLayerOverheadAverageDuration = 00:00:00.0224539, TimeLayers = 07:09:30.1983538, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:19.5694238, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:30.5362150, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.6003325, JobElapsed = 03:50:04.3353720, JobTotal = 06:26:33.0618063, WeightEstimate = 01:17:17.8027111 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:29:22. coolingEstimate=02:30:19.5694238 [PrintingService.cs@1912] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.59963942101416;StartedAtUtc;06:51:40.9968637;11:54:43.9435663;05:03:02.9467026;False;566;312;312;02:27:34.8647297;03:44:52.6674407;03:44:52.6674408;02:09:26.9563453;00:21:51;01:26:25.9620686;00:00:14.7733555;02:23:31.3759454;00:00:00.0224539;07:09:30.1983538;00:00:00;02:30:19.5694238;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:30.5362150;00:00:00;00:04:26.6003325;03:50:04.3353720;06:26:33.0618063 [PrintingService.cs@1918] +06/28/2026 03:26:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 311. PreviewWeight=LayerWeight { Index = 311, FillTotalRelative = 0.1797219816933274, FillMaxRelative = 0.41256740464185493, TimeFromPreview = 35.78099339832258, EnergyDensityIncreaseFactor = 0 }, FillArea=20152.300158070706, PreviewFillRatio=0.41256740464185493, Results=4, StreamingSeconds (preview) = 35.78099339832258, StreamingSeconds (extrapolated) = 36.815930957492505, StreamingSeconds (no overhead) = 1.0318554 (02:23:31.3759454), LayerElapsedSeconds=23.1920738, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 312, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.59964712897887, Elapsed = 06:51:40.9888141, TimeTotal = 11:54:43.9238525, Remaining = 05:03:02.9350384, Incomplete = False, SoftCount = 566, LayerPrintDone = 312, WeightsDone = 312, WeightDone = 02:27:34.8566801, WeightTotal = 03:44:52.6528379, WeightTotalEstimate = 03:44:52.6528380, LayerRecoatElapsed = 02:09:26.9563453, LayerRecoatDelays = 00:21:51, LayerRecoatPrintLayersElapsed = 01:26:25.9620686, LayerRecoatNoDelayAverage = 00:00:14.7733555, StreamingElapsed = 02:23:31.3759454, ObjectLayerOverheadAverageDuration = 00:00:00.0224281, TimeLayers = 07:09:30.1837510, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:19.5643128, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:30.5362150, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.6003325, JobElapsed = 03:50:04.3378538, JobTotal = 06:26:33.0472035, WeightEstimate = 01:17:17.7961579 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:29:22. coolingEstimate=02:30:19.5643128 [PrintingService.cs@1912] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.59964712897887;StartedAtUtc;06:51:40.9888141;11:54:43.9238525;05:03:02.9350384;False;566;312;312;02:27:34.8566801;03:44:52.6528379;03:44:52.6528380;02:09:26.9563453;00:21:51;01:26:25.9620686;00:00:14.7733555;02:23:31.3759454;00:00:00.0224281;07:09:30.1837510;00:00:00;02:30:19.5643128;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:30.5362150;00:00:00;00:04:26.6003325;03:50:04.3378538;06:26:33.0472035 [PrintingService.cs@1918] +06/28/2026 03:26:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 312. PrevPreviewWeight=LayerWeight { Index = 311, FillTotalRelative = 0.1797219816933274, FillMaxRelative = 0.41256740464185493, TimeFromPreview = 35.78099339832258, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.41256740464185493, PreviewWeight=LayerWeight { Index = 312, FillTotalRelative = 0.1804347138361558, FillMaxRelative = 0.41580350790704, TimeFromPreview = 34.828895510987586, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1918967. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531591, LCompressed = 1419256 } [McuMovementClient.cs@491] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633146. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.2558658. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531591, LCompressed = 1419256 } [McuMovementClient.cs@491] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.2668273. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531591, LCompressed = 1419256 } [McuMovementClient.cs@491] +06/28/2026 03:26:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4090.7380945838654, PrevLayerFillRatio=0.41256740464185493: Z1=104.69207387479821, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35204.96755663041, Z2 = 35750 } } [LayerClient.cs@969] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5935091724046 (5935091724046 @ 0) for mcu = 49445.294231 [27/06/2026 00:51:01] (49459.09770038333 sec) to 5936654872425 (from now=5936534872425, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5935091724046 (5935091724046 @ 0) for mcu = 49445.294231 [27/06/2026 00:51:01] (49459.09770038333 sec) to 5936654872425 (from external timestamp, flags=None, requested=5936654872425 (5936654872425 @ 0) for mcu = 49458.320768 [27/06/2026 00:51:14] (49472.123936875 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5935091724046 (5935091724046 @ 0) for mcu = 49445.294231 [27/06/2026 00:51:01] (49459.09770038333 sec) to 5936654872425 (from external timestamp, flags=None, requested=5936654872425 (5936654872425 @ 0) for mcu = 49458.320768 [27/06/2026 00:51:14] (49472.123936875 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:26:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0031593 ~ 5.98 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:26:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0782132. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:42.4439517. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531591, LCompressed = 1419256 } [McuMovementClient.cs@491] +06/28/2026 03:26:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:26:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:26:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:26:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 312, Weight=LayerWeight { Index = 312, FillTotalRelative = 0.1804347138361558, FillMaxRelative = 0.41580350790704, TimeFromPreview = 34.828895510987586, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:26:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:26:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5938971186209, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:26:39 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5939091197266, flushed existing data. Was Timestamp=0, Now=5938971200116, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:26:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:26:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:26:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5936521442694 (5936521442694 @ 0) for mcu = 49457.208851 [27/06/2026 00:51:13] (49471.01202245 sec) to 5939091310888 (from now=5938971310888, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5936521394694 (1519749477041807 @ 8) for mcu = 49457.208451 [27/06/2026 00:51:13] (49471.01162245466 sec) to 5939091310888 (from now=5938971310888, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5936521394694 (1519749477041807 @ 8) for mcu = 49457.208451 [27/06/2026 00:51:13] (49471.01162245466 sec) to 5939091310888 (from now=5938971310888, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.5799965. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531592, LCompressed = 1419258 } [McuMovementClient.cs@491] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:26:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 312 [PrintingService.cs@2118] +06/28/2026 03:26:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.5953240. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531592, LCompressed = 1419258 } [McuMovementClient.cs@491] +06/28/2026 03:26:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 313, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.6817707660113, Elapsed = 06:52:19.7883102, TimeTotal = 11:54:50.1331940, Remaining = 05:02:30.3448838, Incomplete = False, SoftCount = 566, LayerPrintDone = 313, WeightsDone = 313, WeightDone = 02:27:53.3020408, WeightTotal = 03:44:52.3264745, WeightTotalEstimate = 03:44:52.3264746, LayerRecoatElapsed = 02:09:47.3104807, LayerRecoatDelays = 00:21:54, LayerRecoatPrintLayersElapsed = 01:26:46.3162041, LayerRecoatNoDelayAverage = 00:00:14.7792477, StreamingElapsed = 02:23:32.4232891, ObjectLayerOverheadAverageDuration = 00:00:00.0224281, TimeLayers = 07:09:34.7832632, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:21.1741421, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:31.3022010, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.6887155, JobElapsed = 03:50:25.7540403, JobTotal = 06:26:36.7923467, WeightEstimate = 01:16:59.0244338 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:29:10. coolingEstimate=02:30:21.1741421 [PrintingService.cs@1912] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.6817707660113;StartedAtUtc;06:52:19.7883102;11:54:50.1331940;05:02:30.3448838;False;566;313;313;02:27:53.3020408;03:44:52.3264745;03:44:52.3264746;02:09:47.3104807;00:21:54;01:26:46.3162041;00:00:14.7792477;02:23:32.4232891;00:00:00.0224281;07:09:34.7832632;00:00:00;02:30:21.1741421;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:31.3022010;00:00:00;00:04:26.6887155;03:50:25.7540403;06:26:36.7923467 [PrintingService.cs@1918] +06/28/2026 03:26:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 312. PreviewWeight=LayerWeight { Index = 312, FillTotalRelative = 0.1804347138361558, FillMaxRelative = 0.41580350790704, TimeFromPreview = 34.828895510987586, EnergyDensityIncreaseFactor = 0 }, FillArea=20079.699342711283, PreviewFillRatio=0.41580350790704, Results=4, StreamingSeconds (preview) = 34.828895510987586, StreamingSeconds (extrapolated) = 17.74929609413829, StreamingSeconds (no overhead) = 1.0473437 (02:23:32.4232891), LayerElapsedSeconds=21.4178787, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 313, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.68177416139899, Elapsed = 06:52:19.7847420, TimeTotal = 11:54:50.1244833, Remaining = 05:02:30.3397413, Incomplete = False, SoftCount = 566, LayerPrintDone = 313, WeightsDone = 313, WeightDone = 02:27:53.2984726, WeightTotal = 03:44:52.3200221, WeightTotalEstimate = 03:44:52.3200222, LayerRecoatElapsed = 02:09:47.3104807, LayerRecoatDelays = 00:21:54, LayerRecoatPrintLayersElapsed = 01:26:46.3162041, LayerRecoatNoDelayAverage = 00:00:14.7792477, StreamingElapsed = 02:23:32.4232891, ObjectLayerOverheadAverageDuration = 00:00:00.0224167, TimeLayers = 07:09:34.7768108, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:21.1718838, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:31.3022010, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.6887155, JobElapsed = 03:50:25.7567176, JobTotal = 06:26:36.7858943, WeightEstimate = 01:16:59.0215496 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:29:10. coolingEstimate=02:30:21.1718838 [PrintingService.cs@1912] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.68177416139899;StartedAtUtc;06:52:19.7847420;11:54:50.1244833;05:02:30.3397413;False;566;313;313;02:27:53.2984726;03:44:52.3200221;03:44:52.3200222;02:09:47.3104807;00:21:54;01:26:46.3162041;00:00:14.7792477;02:23:32.4232891;00:00:00.0224167;07:09:34.7768108;00:00:00;02:30:21.1718838;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:31.3022010;00:00:00;00:04:26.6887155;03:50:25.7567176;06:26:36.7858943 [PrintingService.cs@1918] +06/28/2026 03:26:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 313. PrevPreviewWeight=LayerWeight { Index = 312, FillTotalRelative = 0.1804347138361558, FillMaxRelative = 0.41580350790704, TimeFromPreview = 34.828895510987586, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.41580350790704, PreviewWeight=LayerWeight { Index = 313, FillTotalRelative = 0.08613811285025667, FillMaxRelative = 0.27444994665635025, TimeFromPreview = 18.223547480860162, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.6126410. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531592, LCompressed = 1419258 } [McuMovementClient.cs@491] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631119. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.6775979. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531592, LCompressed = 1419258 } [McuMovementClient.cs@491] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.6882931. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531592, LCompressed = 1419258 } [McuMovementClient.cs@491] +06/28/2026 03:26:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4095.9836323265954, PrevLayerFillRatio=0.41580350790704: Z1=104.82632011891783, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35309.793876749325, Z2 = 35850 } } [LayerClient.cs@969] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5937874570875 (5937874570875 @ 0) for mcu = 49468.485204 [27/06/2026 00:51:24] (49482.288090625 sec) to 5939225366887 (from now=5939105366887, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5937874570875 (5937874570875 @ 0) for mcu = 49468.485204 [27/06/2026 00:51:24] (49482.288090625 sec) to 5939225366887 (from external timestamp, flags=None, requested=5939225366887 (5939225366887 @ 0) for mcu = 49479.742108 [27/06/2026 00:51:35] (49493.54472405833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5937874570875 (5937874570875 @ 0) for mcu = 49468.485204 [27/06/2026 00:51:24] (49482.288090625 sec) to 5939225366887 (from external timestamp, flags=None, requested=5939225366887 (5939225366887 @ 0) for mcu = 49479.742108 [27/06/2026 00:51:35] (49493.54472405833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:26:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0829371. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:26:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11.0829371. Loops = 45. GC duration = 00:00:00.3542115. SinceCollect=00:01:04.2188507. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531592, LCompressed = 1419258 } [McuMovementClient.cs@478] +06/28/2026 03:26:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=124311, gen1=30918, gen2=903, LatencyMode=Interactive, FreeMemory=5722423296, Live=351185008, HeapSizeBytes=358795264, FragmentedBytes=8236960, TotalCommittedBytes=363741184, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:26:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:26:52 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (333 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:26:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:26:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:26:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 313, Weight=LayerWeight { Index = 313, FillTotalRelative = 0.08613811285025667, FillMaxRelative = 0.27444994665635025, TimeFromPreview = 18.223547480860162, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:26:59 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:26:59 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5941334890153, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:26:59 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5941454902927, flushed existing data. Was Timestamp=0, Now=5941334905884, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:26:59 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:26:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:26:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5939091358888 (5939091358888 @ 0) for mcu = 49478.625368 [27/06/2026 00:51:34] (49492.42799073333 sec) to 5941454927739 (from now=5941334927739, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5939091310888 (1520407375587363 @ 8) for mcu = 49478.624968 [27/06/2026 00:51:34] (49492.42759073447 sec) to 5941454927739 (from now=5941334927739, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:26:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5939091310888 (1520407375587363 @ 8) for mcu = 49478.624968 [27/06/2026 00:51:34] (49492.42759073447 sec) to 5941454927739 (from now=5941334927739, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.9968846. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0598918. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531593, LCompressed = 1419260 } [McuMovementClient.cs@491] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:27:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 313 [PrintingService.cs@2118] +06/28/2026 03:27:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0751561. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531593, LCompressed = 1419260 } [McuMovementClient.cs@491] +06/28/2026 03:27:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 314, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.758125178660116, Elapsed = 06:52:39.4859218, TimeTotal = 11:54:27.5374161, Remaining = 05:01:48.0514943, Incomplete = False, SoftCount = 566, LayerPrintDone = 314, WeightsDone = 314, WeightDone = 02:27:54.3416787, WeightTotal = 03:44:33.9154999, WeightTotalEstimate = 03:44:33.9155000, LayerRecoatElapsed = 02:10:05.9684544, LayerRecoatDelays = 00:21:57, LayerRecoatPrintLayersElapsed = 01:27:04.9741779, LayerRecoatNoDelayAverage = 00:00:14.7812493, StreamingElapsed = 02:23:33.4440785, ObjectLayerOverheadAverageDuration = 00:00:00.0224167, TimeLayers = 07:09:18.0456499, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:15.3159775, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:31.5624090, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.7187395, JobElapsed = 03:50:45.4558477, JobTotal = 06:26:19.7645014, WeightEstimate = 01:16:39.5738213 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:48. coolingEstimate=02:30:15.3159775 [PrintingService.cs@1912] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.758125178660116;StartedAtUtc;06:52:39.4859218;11:54:27.5374161;05:01:48.0514943;False;566;314;314;02:27:54.3416787;03:44:33.9154999;03:44:33.9155000;02:10:05.9684544;00:21:57;01:27:04.9741779;00:00:14.7812493;02:23:33.4440785;00:00:00.0224167;07:09:18.0456499;00:00:00;02:30:15.3159775;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:31.5624090;00:00:00;00:04:26.7187395;03:50:45.4558477;06:26:19.7645014 [PrintingService.cs@1918] +06/28/2026 03:27:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 313. PreviewWeight=LayerWeight { Index = 313, FillTotalRelative = 0.08613811285025667, FillMaxRelative = 0.27444994665635025, TimeFromPreview = 18.223547480860162, EnergyDensityIncreaseFactor = 0 }, FillArea=17848.225280889917, PreviewFillRatio=0.27444994665635025, Results=3, StreamingSeconds (preview) = 18.223547480860162, StreamingSeconds (extrapolated) = 18.4253115211107, StreamingSeconds (no overhead) = 1.0207894 (02:23:33.4440785), LayerElapsedSeconds=19.6992243, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 314, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.75812612923066, Elapsed = 06:52:39.4849171, TimeTotal = 11:54:27.5349711, Remaining = 05:01:48.0500540, Incomplete = False, SoftCount = 566, LayerPrintDone = 314, WeightsDone = 314, WeightDone = 02:27:54.3406740, WeightTotal = 03:44:33.9136888, WeightTotalEstimate = 03:44:33.9136888, LayerRecoatElapsed = 02:10:05.9684544, LayerRecoatDelays = 00:21:57, LayerRecoatPrintLayersElapsed = 01:27:04.9741779, LayerRecoatNoDelayAverage = 00:00:14.7812493, StreamingElapsed = 02:23:33.4440785, ObjectLayerOverheadAverageDuration = 00:00:00.0224135, TimeLayers = 07:09:18.0438388, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:15.3153436, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:31.5624090, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.7187395, JobElapsed = 03:50:45.4572475, JobTotal = 06:26:19.7626903, WeightEstimate = 01:16:39.5730148 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:48. coolingEstimate=02:30:15.3153436 [PrintingService.cs@1912] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.75812612923066;StartedAtUtc;06:52:39.4849171;11:54:27.5349711;05:01:48.0500540;False;566;314;314;02:27:54.3406740;03:44:33.9136888;03:44:33.9136888;02:10:05.9684544;00:21:57;01:27:04.9741779;00:00:14.7812493;02:23:33.4440785;00:00:00.0224135;07:09:18.0438388;00:00:00;02:30:15.3153436;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:31.5624090;00:00:00;00:04:26.7187395;03:50:45.4572475;06:26:19.7626903 [PrintingService.cs@1918] +06/28/2026 03:27:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 314. PrevPreviewWeight=LayerWeight { Index = 313, FillTotalRelative = 0.08613811285025667, FillMaxRelative = 0.27444994665635025, TimeFromPreview = 18.223547480860162, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.27444994665635025, PreviewWeight=LayerWeight { Index = 314, FillTotalRelative = 0.08669879561709158, FillMaxRelative = 0.2772600863123049, TimeFromPreview = 17.13717597151962, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0926158. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531593, LCompressed = 1419260 } [McuMovementClient.cs@491] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633569. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.1597115. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531593, LCompressed = 1419260 } [McuMovementClient.cs@491] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.1753794. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531593, LCompressed = 1419260 } [McuMovementClient.cs@491] +06/28/2026 03:27:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3866.857618769847, PrevLayerFillRatio=0.27444994665635025: Z1=98.96242050391173, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35408.75629725324, Z2 = 35950 } } [LayerClient.cs@969] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5940445058678 (5940445058678 @ 0) for mcu = 49489.906455 [27/06/2026 00:51:45] (49503.708822316665 sec) to 5941590030828 (from now=5941470030828, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5940445058678 (5940445058678 @ 0) for mcu = 49489.906455 [27/06/2026 00:51:45] (49503.708822316665 sec) to 5941590030828 (from external timestamp, flags=None, requested=5941590030828 (5941590030828 @ 0) for mcu = 49499.448121 [27/06/2026 00:51:55] (49513.2502569 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5940445058678 (5940445058678 @ 0) for mcu = 49489.906455 [27/06/2026 00:51:45] (49503.708822316665 sec) to 5941590030828 (from external timestamp, flags=None, requested=5941590030828 (5941590030828 @ 0) for mcu = 49499.448121 [27/06/2026 00:51:55] (49513.2502569 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:27:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0711532. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.3502396. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531593, LCompressed = 1419260 } [McuMovementClient.cs@491] +06/28/2026 03:27:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:27:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 03:27:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 03:27:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 03:27:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 03:27:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 03:27:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 03:27:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:27:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:27:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 314, Weight=LayerWeight { Index = 314, FillTotalRelative = 0.08669879561709158, FillMaxRelative = 0.2772600863123049, TimeFromPreview = 17.13717597151962, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:27:23 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:27:23 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5944228544685, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:27:23 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5944348547875, flushed existing data. Was Timestamp=0, Now=5944228550730, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:27:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:27:23 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:27:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5941454975739 (5941454975739 @ 0) for mcu = 49498.322610 [27/06/2026 00:51:54] (49512.124797825 sec) to 5944348569394 (from now=5944228569394, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5941454927739 (1521012461501345 @ 8) for mcu = 49498.322210 [27/06/2026 00:51:54] (49512.12439783024 sec) to 5944348569394 (from now=5944228569394, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5941454927739 (1521012461501345 @ 8) for mcu = 49498.322210 [27/06/2026 00:51:54] (49512.12439783024 sec) to 5944348569394 (from now=5944228569394, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.1738778. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531594, LCompressed = 1419262 } [McuMovementClient.cs@491] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:27:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 314 [PrintingService.cs@2118] +06/28/2026 03:27:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.1850983. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531594, LCompressed = 1419262 } [McuMovementClient.cs@491] +06/28/2026 03:27:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 315, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.82779844313364, Elapsed = 06:53:03.5957889, TimeTotal = 11:54:17.5813988, Remaining = 05:01:13.9856099, Incomplete = False, SoftCount = 566, LayerPrintDone = 315, WeightsDone = 315, WeightDone = 02:27:55.3815478, WeightTotal = 03:44:16.4920432, WeightTotalEstimate = 03:44:16.4920432, LayerRecoatElapsed = 02:10:29.0384524, LayerRecoatDelays = 00:22:00, LayerRecoatPrintLayersElapsed = 01:27:28.0441759, LayerRecoatNoDelayAverage = 00:00:14.7932692, StreamingElapsed = 02:23:34.4625388, ObjectLayerOverheadAverageDuration = 00:00:00.0224135, TimeLayers = 07:09:10.6708223, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:12.7347878, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:33.1249960, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.8990380, JobElapsed = 03:51:09.5628554, JobTotal = 06:26:10.6467883, WeightEstimate = 01:16:21.1104954 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:38. coolingEstimate=02:30:12.7347878 [PrintingService.cs@1912] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.82779844313364;StartedAtUtc;06:53:03.5957889;11:54:17.5813988;05:01:13.9856099;False;566;315;315;02:27:55.3815478;03:44:16.4920432;03:44:16.4920432;02:10:29.0384524;00:22:00;01:27:28.0441759;00:00:14.7932692;02:23:34.4625388;00:00:00.0224135;07:09:10.6708223;00:00:00;02:30:12.7347878;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:33.1249960;00:00:00;00:04:26.8990380;03:51:09.5628554;06:26:10.6467883 [PrintingService.cs@1918] +06/28/2026 03:27:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 314. PreviewWeight=LayerWeight { Index = 314, FillTotalRelative = 0.08669879561709158, FillMaxRelative = 0.2772600863123049, TimeFromPreview = 17.13717597151962, EnergyDensityIncreaseFactor = 0 }, FillArea=17985.002628411425, PreviewFillRatio=0.2772600863123049, Results=3, StreamingSeconds (preview) = 17.13717597151962, StreamingSeconds (extrapolated) = 17.440105941421077, StreamingSeconds (no overhead) = 1.0184603 (02:23:34.4625388), LayerElapsedSeconds=24.1057343, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 315, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.827802054414676, Elapsed = 06:53:03.5919459, TimeTotal = 11:54:17.5720768, Remaining = 05:01:13.9801309, Incomplete = False, SoftCount = 566, LayerPrintDone = 315, WeightsDone = 315, WeightDone = 02:27:55.3777048, WeightTotal = 03:44:16.4851380, WeightTotalEstimate = 03:44:16.4851380, LayerRecoatElapsed = 02:10:29.0384524, LayerRecoatDelays = 00:22:00, LayerRecoatPrintLayersElapsed = 01:27:28.0441759, LayerRecoatNoDelayAverage = 00:00:14.7932692, StreamingElapsed = 02:23:34.4625388, ObjectLayerOverheadAverageDuration = 00:00:00.0224013, TimeLayers = 07:09:10.6639171, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:12.7323710, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:33.1249960, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:26.8990380, JobElapsed = 03:51:09.5646477, JobTotal = 06:26:10.6398831, WeightEstimate = 01:16:21.1074332 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:38. coolingEstimate=02:30:12.7323710 [PrintingService.cs@1912] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.827802054414676;StartedAtUtc;06:53:03.5919459;11:54:17.5720768;05:01:13.9801309;False;566;315;315;02:27:55.3777048;03:44:16.4851380;03:44:16.4851380;02:10:29.0384524;00:22:00;01:27:28.0441759;00:00:14.7932692;02:23:34.4625388;00:00:00.0224013;07:09:10.6639171;00:00:00;02:30:12.7323710;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:33.1249960;00:00:00;00:04:26.8990380;03:51:09.5646477;06:26:10.6398831 [PrintingService.cs@1918] +06/28/2026 03:27:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 315. PrevPreviewWeight=LayerWeight { Index = 314, FillTotalRelative = 0.08669879561709158, FillMaxRelative = 0.2772600863123049, TimeFromPreview = 17.13717597151962, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.2772600863123049, PreviewWeight=LayerWeight { Index = 315, FillTotalRelative = 0.08661574391817094, FillMaxRelative = 0.2756085487807931, TimeFromPreview = 18.061026467225222, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.2007890. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531594, LCompressed = 1419262 } [McuMovementClient.cs@491] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632214. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.2645388. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531594, LCompressed = 1419262 } [McuMovementClient.cs@491] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:32.2767903. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531594, LCompressed = 1419262 } [McuMovementClient.cs@491] +06/28/2026 03:27:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3871.4126939388743, PrevLayerFillRatio=0.2772600863123049: Z1=99.07899610838088, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35507.83529336162, Z2 = 36050 } } [LayerClient.cs@969] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5942809446317 (5942809446317 @ 0) for mcu = 49509.610112 [27/06/2026 00:52:05] (49523.41205264167 sec) to 5944482146396 (from now=5944362146396, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5942809446317 (5942809446317 @ 0) for mcu = 49509.610112 [27/06/2026 00:52:05] (49523.41205264167 sec) to 5944482146396 (from external timestamp, flags=None, requested=5944482146396 (5944482146396 @ 0) for mcu = 49523.549605 [27/06/2026 00:52:19] (49537.351219966666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5942809446317 (5942809446317 @ 0) for mcu = 49509.610112 [27/06/2026 00:52:05] (49523.41205264167 sec) to 5944482146396 (from external timestamp, flags=None, requested=5944482146396 (5944482146396 @ 0) for mcu = 49523.549605 [27/06/2026 00:52:19] (49537.351219966666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:27:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0749885 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:27:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134 [HeaterCheck.cs@111] +06/28/2026 03:27:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0732189. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:43.4525073. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531594, LCompressed = 1419262 } [McuMovementClient.cs@491] +06/28/2026 03:27:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:27:52 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:27:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:27:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 315, Weight=LayerWeight { Index = 315, FillTotalRelative = 0.08661574391817094, FillMaxRelative = 0.2756085487807931, TimeFromPreview = 18.061026467225222, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:27:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:27:55 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5948044342281, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:27:55 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5948164345210, flushed existing data. Was Timestamp=0, Now=5948044348006, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:27:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:27:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:27:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5944348617394 (5944348617394 @ 0) for mcu = 49522.436842 [27/06/2026 00:52:18] (49536.23847828333 sec) to 5948164380190 (from now=5948044380190, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5944348569394 (1521753233764911 @ 8) for mcu = 49522.436442 [27/06/2026 00:52:18] (49536.23807828486 sec) to 5948164380190 (from now=5948044380190, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5944348569394 (1521753233764911 @ 8) for mcu = 49522.436442 [27/06/2026 00:52:18] (49536.23807828486 sec) to 5948164380190 (from now=5948044380190, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:01. Loops = 4. [McuMovementClient.cs@475] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (110 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:01. Loops = 4. GC duration = 00:00:00.3605180. SinceCollect=00:01:04.3339328. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531595, LCompressed = 1419264 } [McuMovementClient.cs@478] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=124479, gen1=30939, gen2=904, LatencyMode=Interactive, FreeMemory=5708038144, Live=353125648, HeapSizeBytes=358597952, FragmentedBytes=6144016, TotalCommittedBytes=365707264, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:27:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 315 [PrintingService.cs@2118] +06/28/2026 03:27:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0163933. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531595, LCompressed = 1419264 } [McuMovementClient.cs@491] +06/28/2026 03:27:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 316, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.891291548593514, Elapsed = 06:53:35.7604355, TimeTotal = 11:54:26.1371541, Remaining = 05:00:50.3767186, Incomplete = False, SoftCount = 566, LayerPrintDone = 316, WeightsDone = 316, WeightDone = 02:27:56.7824515, WeightTotal = 03:43:58.2416236, WeightTotalEstimate = 03:43:58.2416236, LayerRecoatElapsed = 02:10:59.8021953, LayerRecoatDelays = 00:22:03, LayerRecoatPrintLayersElapsed = 01:27:58.8079187, LayerRecoatNoDelayAverage = 00:00:14.8226807, StreamingElapsed = 02:23:35.8448842, ObjectLayerOverheadAverageDuration = 00:00:00.0224013, TimeLayers = 07:09:17.0084188, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:14.9529466, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:36.9484910, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.3402105, JobElapsed = 03:51:41.7308257, JobTotal = 06:26:12.7197173, WeightEstimate = 01:16:01.4591721 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:47. coolingEstimate=02:30:14.9529466 [PrintingService.cs@1912] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.891291548593514;StartedAtUtc;06:53:35.7604355;11:54:26.1371541;05:00:50.3767186;False;566;316;316;02:27:56.7824515;03:43:58.2416236;03:43:58.2416236;02:10:59.8021953;00:22:03;01:27:58.8079187;00:00:14.8226807;02:23:35.8448842;00:00:00.0224013;07:09:17.0084188;00:00:00;02:30:14.9529466;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:36.9484910;00:00:00;00:04:27.3402105;03:51:41.7308257;06:26:12.7197173 [PrintingService.cs@1918] +06/28/2026 03:27:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 315. PreviewWeight=LayerWeight { Index = 315, FillTotalRelative = 0.08661574391817094, FillMaxRelative = 0.2756085487807931, TimeFromPreview = 18.061026467225222, EnergyDensityIncreaseFactor = 0 }, FillArea=18009.770136600793, PreviewFillRatio=0.2756085487807931, Results=3, StreamingSeconds (preview) = 18.061026467225222, StreamingSeconds (extrapolated) = 18.62585982411313, StreamingSeconds (no overhead) = 1.3823454 (02:23:35.8448842), LayerElapsedSeconds=32.1661863, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 316, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.891292138127646, Elapsed = 06:53:35.7598034, TimeTotal = 11:54:26.1356257, Remaining = 05:00:50.3758223, Incomplete = False, SoftCount = 566, LayerPrintDone = 316, WeightsDone = 316, WeightDone = 02:27:56.7818194, WeightTotal = 03:43:58.2404915, WeightTotalEstimate = 03:43:58.2404916, LayerRecoatElapsed = 02:10:59.8021953, LayerRecoatDelays = 00:22:03, LayerRecoatPrintLayersElapsed = 01:27:58.8079187, LayerRecoatNoDelayAverage = 00:00:14.8226807, StreamingElapsed = 02:23:35.8448842, ObjectLayerOverheadAverageDuration = 00:00:00.0223993, TimeLayers = 07:09:17.0072867, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:14.9525503, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:36.9484910, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.3402105, JobElapsed = 03:51:41.7331447, JobTotal = 06:26:12.7185852, WeightEstimate = 01:16:01.4586722 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:47. coolingEstimate=02:30:14.9525503 [PrintingService.cs@1912] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.891292138127646;StartedAtUtc;06:53:35.7598034;11:54:26.1356257;05:00:50.3758223;False;566;316;316;02:27:56.7818194;03:43:58.2404915;03:43:58.2404916;02:10:59.8021953;00:22:03;01:27:58.8079187;00:00:14.8226807;02:23:35.8448842;00:00:00.0223993;07:09:17.0072867;00:00:00;02:30:14.9525503;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:36.9484910;00:00:00;00:04:27.3402105;03:51:41.7331447;06:26:12.7185852 [PrintingService.cs@1918] +06/28/2026 03:27:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 316. PrevPreviewWeight=LayerWeight { Index = 315, FillTotalRelative = 0.08661574391817094, FillMaxRelative = 0.2756085487807931, TimeFromPreview = 18.061026467225222, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.2756085487807931, PreviewWeight=LayerWeight { Index = 316, FillTotalRelative = 0.08704790840004967, FillMaxRelative = 0.277974255214785, TimeFromPreview = 17.52679835289386, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0357358. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531595, LCompressed = 1419264 } [McuMovementClient.cs@491] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625746. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0994496. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531595, LCompressed = 1419264 } [McuMovementClient.cs@491] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1103440. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531595, LCompressed = 1419264 } [McuMovementClient.cs@491] +06/28/2026 03:27:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3868.735646346394, PrevLayerFillRatio=0.2756085487807931: Z1=99.01048386001929, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35606.845777221635, Z2 = 36150 } } [LayerClient.cs@969] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5945701571973 (5945701571973 @ 0) for mcu = 49533.711729 [27/06/2026 00:52:29] (49547.513099775 sec) to 5948342177641 (from now=5948222177641, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5945701571973 (5945701571973 @ 0) for mcu = 49533.711729 [27/06/2026 00:52:29] (49547.513099775 sec) to 5948342177641 (from external timestamp, flags=None, requested=5948342177641 (5948342177641 @ 0) for mcu = 49555.717290 [27/06/2026 00:52:51] (49569.51814700833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5945701571973 (5945701571973 @ 0) for mcu = 49533.711729 [27/06/2026 00:52:29] (49547.513099775 sec) to 5948342177641 (from external timestamp, flags=None, requested=5948342177641 (5948342177641 @ 0) for mcu = 49555.717290 [27/06/2026 00:52:51] (49569.51814700833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0798107. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2846479. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531595, LCompressed = 1419264 } [McuMovementClient.cs@491] +06/28/2026 03:28:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:28:07 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:28:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:28:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 316, Weight=LayerWeight { Index = 316, FillTotalRelative = 0.08704790840004967, FillMaxRelative = 0.277974255214785, TimeFromPreview = 17.52679835289386, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:28:10 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5949926616697, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:28:10 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5950046619329, flushed existing data. Was Timestamp=0, Now=5949926622179, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:28:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:28:10 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:28:10 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:28:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5948164428190 (5948164428190 @ 0) for mcu = 49554.236028 [27/06/2026 00:52:50] (49568.036901583335 sec) to 5950046651449 (from now=5949926651449, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5948164380190 (1522730081328650 @ 8) for mcu = 49554.235628 [27/06/2026 00:52:50] (49568.03650158366 sec) to 5950046651449 (from now=5949926651449, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5948164380190 (1522730081328650 @ 8) for mcu = 49554.235628 [27/06/2026 00:52:50] (49568.03650158366 sec) to 5950046651449 (from now=5949926651449, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.3223398. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531596, LCompressed = 1419266 } [McuMovementClient.cs@491] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:28:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 316 [PrintingService.cs@2118] +06/28/2026 03:28:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.3339365. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531596, LCompressed = 1419266 } [McuMovementClient.cs@491] +06/28/2026 03:28:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 317, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.97121840440917, Elapsed = 06:53:51.0819364, TimeTotal = 11:53:53.4656746, Remaining = 05:00:02.3837382, Incomplete = False, SoftCount = 566, LayerPrintDone = 317, WeightsDone = 317, WeightDone = 02:27:57.8200894, WeightTotal = 03:43:40.7338667, WeightTotalEstimate = 03:43:40.7338668, LayerRecoatElapsed = 02:11:14.0860583, LayerRecoatDelays = 00:22:06, LayerRecoatPrintLayersElapsed = 01:28:13.0917820, LayerRecoatNoDelayAverage = 00:00:14.8146743, StreamingElapsed = 02:23:36.8607549, ObjectLayerOverheadAverageDuration = 00:00:00.0223993, TimeLayers = 07:08:52.8073229, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:06.4825630, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:35.9076590, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.2201145, JobElapsed = 03:51:57.0464855, JobTotal = 06:25:49.6795494, WeightEstimate = 01:15:42.9137774 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:14. coolingEstimate=02:30:06.4825630 [PrintingService.cs@1912] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.97121840440917;StartedAtUtc;06:53:51.0819364;11:53:53.4656746;05:00:02.3837382;False;566;317;317;02:27:57.8200894;03:43:40.7338667;03:43:40.7338668;02:11:14.0860583;00:22:06;01:28:13.0917820;00:00:14.8146743;02:23:36.8607549;00:00:00.0223993;07:08:52.8073229;00:00:00;02:30:06.4825630;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:35.9076590;00:00:00;00:04:27.2201145;03:51:57.0464855;06:25:49.6795494 [PrintingService.cs@1918] +06/28/2026 03:28:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 316. PreviewWeight=LayerWeight { Index = 316, FillTotalRelative = 0.08704790840004967, FillMaxRelative = 0.277974255214785, TimeFromPreview = 17.52679835289386, EnergyDensityIncreaseFactor = 0 }, FillArea=18013.770107868742, PreviewFillRatio=0.277974255214785, Results=3, StreamingSeconds (preview) = 17.52679835289386, StreamingSeconds (extrapolated) = 17.522495474938125, StreamingSeconds (no overhead) = 1.0158707 (02:23:36.8607549), LayerElapsedSeconds=15.3137827, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 317, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 57.97122399160215, Elapsed = 06:53:51.0759135, TimeTotal = 11:53:53.4511569, Remaining = 05:00:02.3752434, Incomplete = False, SoftCount = 566, LayerPrintDone = 317, WeightsDone = 317, WeightDone = 02:27:57.8140665, WeightTotal = 03:43:40.7231128, WeightTotalEstimate = 03:43:40.7231128, LayerRecoatElapsed = 02:11:14.0860583, LayerRecoatDelays = 00:22:06, LayerRecoatPrintLayersElapsed = 01:28:13.0917820, LayerRecoatNoDelayAverage = 00:00:14.8146743, StreamingElapsed = 02:23:36.8607549, ObjectLayerOverheadAverageDuration = 00:00:00.0223803, TimeLayers = 07:08:52.7965690, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:06.4787992, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:35.9076590, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.2201145, JobElapsed = 03:51:57.0490231, JobTotal = 06:25:49.6687955, WeightEstimate = 01:15:42.9090463 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:28:14. coolingEstimate=02:30:06.4787992 [PrintingService.cs@1912] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 57.97122399160215;StartedAtUtc;06:53:51.0759135;11:53:53.4511569;05:00:02.3752434;False;566;317;317;02:27:57.8140665;03:43:40.7231128;03:43:40.7231128;02:11:14.0860583;00:22:06;01:28:13.0917820;00:00:14.8146743;02:23:36.8607549;00:00:00.0223803;07:08:52.7965690;00:00:00;02:30:06.4787992;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:35.9076590;00:00:00;00:04:27.2201145;03:51:57.0490231;06:25:49.6687955 [PrintingService.cs@1918] +06/28/2026 03:28:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 317. PrevPreviewWeight=LayerWeight { Index = 316, FillTotalRelative = 0.08704790840004967, FillMaxRelative = 0.277974255214785, TimeFromPreview = 17.52679835289386, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.277974255214785, PreviewWeight=LayerWeight { Index = 317, FillTotalRelative = 0.08704975644865057, FillMaxRelative = 0.2767243969487681, TimeFromPreview = 18.03295519557047, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.3555852. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531596, LCompressed = 1419266 } [McuMovementClient.cs@491] +06/28/2026 03:28:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632609. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.4180504. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531596, LCompressed = 1419266 } [McuMovementClient.cs@491] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.4306064. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531596, LCompressed = 1419266 } [McuMovementClient.cs@491] +06/28/2026 03:28:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3872.5703207590523, PrevLayerFillRatio=0.277974255214785: Z1=99.1086226329286, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35705.95439985456, Z2 = 36250 } } [LayerClient.cs@969] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5949561605428 (5949561605428 @ 0) for mcu = 49565.879417 [27/06/2026 00:53:01] (49579.680045233334 sec) to 5950180538629 (from now=5950060538629, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5949561605428 (5949561605428 @ 0) for mcu = 49565.879417 [27/06/2026 00:53:01] (49579.680045233334 sec) to 5950180538629 (from external timestamp, flags=None, requested=5950180538629 (5950180538629 @ 0) for mcu = 49571.037313 [27/06/2026 00:53:07] (49584.83782190833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5949561605428 (5949561605428 @ 0) for mcu = 49565.879417 [27/06/2026 00:53:01] (49579.680045233334 sec) to 5950180538629 (from external timestamp, flags=None, requested=5950180538629 (5950180538629 @ 0) for mcu = 49571.037313 [27/06/2026 00:53:07] (49584.83782190833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0798762. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:26.6044791. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531596, LCompressed = 1419266 } [McuMovementClient.cs@491] +06/28/2026 03:28:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:28:27 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:28:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0901820 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:28:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:28:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 317, Weight=LayerWeight { Index = 317, FillTotalRelative = 0.08704975644865057, FillMaxRelative = 0.2767243969487681, TimeFromPreview = 18.03295519557047, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:28:30 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:28:30 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5952251728426, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:28:30 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5952371732743, flushed existing data. Was Timestamp=0, Now=5952251735402, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:28:30 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:28:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5950046699449 (5950046699449 @ 0) for mcu = 49569.921913 [27/06/2026 00:53:05] (49583.722495408336 sec) to 5952371756835 (from now=5952251756835, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5950046651449 (1523211942771167 @ 8) for mcu = 49569.921513 [27/06/2026 00:53:05] (49583.72209541559 sec) to 5952371756835 (from now=5952251756835, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5950046651449 (1523211942771167 @ 8) for mcu = 49569.921513 [27/06/2026 00:53:05] (49583.72209541559 sec) to 5952371756835 (from now=5952251756835, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.6987020. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531597, LCompressed = 1419268 } [McuMovementClient.cs@491] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:28:31 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 317 [PrintingService.cs@2118] +06/28/2026 03:28:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.7117292. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531597, LCompressed = 1419268 } [McuMovementClient.cs@491] +06/28/2026 03:28:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 318, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.04867057047552, Elapsed = 06:54:10.4550690, TimeTotal = 11:53:29.6885334, Remaining = 04:59:19.2334644, Incomplete = False, SoftCount = 566, LayerPrintDone = 318, WeightsDone = 318, WeightDone = 02:27:58.8546428, WeightTotal = 03:43:22.1324634, WeightTotalEstimate = 03:43:22.1324634, LayerRecoatElapsed = 02:11:32.4246375, LayerRecoatDelays = 00:22:09, LayerRecoatPrintLayersElapsed = 01:28:31.4303613, LayerRecoatNoDelayAverage = 00:00:14.8158570, StreamingElapsed = 02:23:37.8789509, ObjectLayerOverheadAverageDuration = 00:00:00.0223803, TimeLayers = 07:08:35.1946257, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:00.3181190, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:36.0614100, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.2378550, JobElapsed = 03:52:16.4232476, JobTotal = 06:25:31.8953607, WeightEstimate = 01:15:23.2778206 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:27:50. coolingEstimate=02:30:00.3181190 [PrintingService.cs@1912] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.04867057047552;StartedAtUtc;06:54:10.4550690;11:53:29.6885334;04:59:19.2334644;False;566;318;318;02:27:58.8546428;03:43:22.1324634;03:43:22.1324634;02:11:32.4246375;00:22:09;01:28:31.4303613;00:00:14.8158570;02:23:37.8789509;00:00:00.0223803;07:08:35.1946257;00:00:00;02:30:00.3181190;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:36.0614100;00:00:00;00:04:27.2378550;03:52:16.4232476;06:25:31.8953607 [PrintingService.cs@1918] +06/28/2026 03:28:31 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 317. PreviewWeight=LayerWeight { Index = 317, FillTotalRelative = 0.08704975644865057, FillMaxRelative = 0.2767243969487681, TimeFromPreview = 18.03295519557047, EnergyDensityIncreaseFactor = 0 }, FillArea=18043.682653780317, PreviewFillRatio=0.2767243969487681, Results=3, StreamingSeconds (preview) = 18.03295519557047, StreamingSeconds (extrapolated) = 18.608845350304186, StreamingSeconds (no overhead) = 1.018196 (02:23:37.8789509), LayerElapsedSeconds=19.371432, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 318, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.048673209848275, Elapsed = 06:54:10.4522069, TimeTotal = 11:53:29.6816564, Remaining = 04:59:19.2294495, Incomplete = False, SoftCount = 566, LayerPrintDone = 318, WeightsDone = 318, WeightDone = 02:27:58.8517807, WeightTotal = 03:43:22.1273693, WeightTotalEstimate = 03:43:22.1273694, LayerRecoatElapsed = 02:11:32.4246375, LayerRecoatDelays = 00:22:09, LayerRecoatPrintLayersElapsed = 01:28:31.4303613, LayerRecoatNoDelayAverage = 00:00:14.8158570, StreamingElapsed = 02:23:37.8789509, ObjectLayerOverheadAverageDuration = 00:00:00.0223713, TimeLayers = 07:08:35.1895316, CoolingElapsed = 00:00:00, CoolingEstimate = 02:30:00.3163361, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:36.0614100, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.2378550, JobElapsed = 03:52:16.4242649, JobTotal = 06:25:31.8902666, WeightEstimate = 01:15:23.2755887 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:27:50. coolingEstimate=02:30:00.3163361 [PrintingService.cs@1912] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.048673209848275;StartedAtUtc;06:54:10.4522069;11:53:29.6816564;04:59:19.2294495;False;566;318;318;02:27:58.8517807;03:43:22.1273693;03:43:22.1273694;02:11:32.4246375;00:22:09;01:28:31.4303613;00:00:14.8158570;02:23:37.8789509;00:00:00.0223713;07:08:35.1895316;00:00:00;02:30:00.3163361;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:36.0614100;00:00:00;00:04:27.2378550;03:52:16.4242649;06:25:31.8902666 [PrintingService.cs@1918] +06/28/2026 03:28:31 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 318. PrevPreviewWeight=LayerWeight { Index = 317, FillTotalRelative = 0.08704975644865057, FillMaxRelative = 0.2767243969487681, TimeFromPreview = 18.03295519557047, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.2767243969487681, PreviewWeight=LayerWeight { Index = 318, FillTotalRelative = 0.087520434548717, FillMaxRelative = 0.27907164029415676, TimeFromPreview = 17.777606547089416, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.7274271. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531597, LCompressed = 1419268 } [McuMovementClient.cs@491] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632667. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.7900954. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531597, LCompressed = 1419268 } [McuMovementClient.cs@491] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.8029004. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531597, LCompressed = 1419268 } [McuMovementClient.cs@491] +06/28/2026 03:28:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3870.5443722122336, PrevLayerFillRatio=0.2767243969487681: Z1=99.05677361448107, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35805.01117346904, Z2 = 36350 } } [LayerClient.cs@969] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5951399958186 (5951399958186 @ 0) for mcu = 49581.199333 [27/06/2026 00:53:17] (49594.99965155 sec) to 5952505165477 (from now=5952385165477, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5951399958186 (5951399958186 @ 0) for mcu = 49581.199333 [27/06/2026 00:53:17] (49594.99965155 sec) to 5952505165477 (from external timestamp, flags=None, requested=5952505165477 (5952505165477 @ 0) for mcu = 49590.409601 [27/06/2026 00:53:26] (49604.20971230834 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5951399958186 (5951399958186 @ 0) for mcu = 49581.199333 [27/06/2026 00:53:17] (49594.99965155 sec) to 5952505165477 (from external timestamp, flags=None, requested=5952505165477 (5952505165477 @ 0) for mcu = 49590.409601 [27/06/2026 00:53:26] (49604.20971230834 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:28:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0754892. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:45.9749291. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531597, LCompressed = 1419268 } [McuMovementClient.cs@491] +06/28/2026 03:28:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:28:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:28:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:28:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 318, Weight=LayerWeight { Index = 318, FillTotalRelative = 0.087520434548717, FillMaxRelative = 0.27907164029415676, TimeFromPreview = 17.777606547089416, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:28:51 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5954801474620, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:28:51 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5954921478065, flushed existing data. Was Timestamp=0, Now=5954801480708, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:28:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:28:51 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:28:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:51 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:28:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5952371804835 (5952371804835 @ 0) for mcu = 49589.298210 [27/06/2026 00:53:25] (49603.098373625 sec) to 5954921525839 (from now=5954801525839, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5952371756835 (1523807169749869 @ 8) for mcu = 49589.297810 [27/06/2026 00:53:25] (49603.09797362855 sec) to 5954921525839 (from now=5954801525839, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5952371756835 (1523807169749869 @ 8) for mcu = 49589.297810 [27/06/2026 00:53:25] (49603.09797362855 sec) to 5954921525839 (from now=5954801525839, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.9483761. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531598, LCompressed = 1419270 } [McuMovementClient.cs@491] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:28:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 318 [PrintingService.cs@2118] +06/28/2026 03:28:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.9634199. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531598, LCompressed = 1419270 } [McuMovementClient.cs@491] +06/28/2026 03:28:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 319, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.12224185581457, Elapsed = 06:54:31.7090923, TimeTotal = 11:53:12.0677148, Remaining = 04:58:40.3586225, Incomplete = False, SoftCount = 566, LayerPrintDone = 319, WeightsDone = 319, WeightDone = 02:27:59.8945542, WeightTotal = 03:43:04.5644013, WeightTotalEstimate = 03:43:04.5644014, LayerRecoatElapsed = 02:11:52.6387494, LayerRecoatDelays = 00:22:12, LayerRecoatPrintLayersElapsed = 01:28:51.6444734, LayerRecoatNoDelayAverage = 00:00:14.8212584, StreamingElapsed = 02:23:38.8993531, ObjectLayerOverheadAverageDuration = 00:00:00.0223713, TimeLayers = 07:08:22.1421675, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:55.7497586, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:36.7635920, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.3188760, JobElapsed = 03:52:37.6762816, JobTotal = 06:25:18.0596995, WeightEstimate = 01:15:04.6698472 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:27:32. coolingEstimate=02:29:55.7497586 [PrintingService.cs@1912] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.12224185581457;StartedAtUtc;06:54:31.7090923;11:53:12.0677148;04:58:40.3586225;False;566;319;319;02:27:59.8945542;03:43:04.5644013;03:43:04.5644014;02:11:52.6387494;00:22:12;01:28:51.6444734;00:00:14.8212584;02:23:38.8993531;00:00:00.0223713;07:08:22.1421675;00:00:00;02:29:55.7497586;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:36.7635920;00:00:00;00:04:27.3188760;03:52:37.6762816;06:25:18.0596995 [PrintingService.cs@1918] +06/28/2026 03:28:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 318. PreviewWeight=LayerWeight { Index = 318, FillTotalRelative = 0.087520434548717, FillMaxRelative = 0.27907164029415676, TimeFromPreview = 17.777606547089416, EnergyDensityIncreaseFactor = 0 }, FillArea=18051.356501264403, PreviewFillRatio=0.27907164029415676, Results=3, StreamingSeconds (preview) = 17.777606547089416, StreamingSeconds (extrapolated) = 17.58337024833451, StreamingSeconds (no overhead) = 1.0204022 (02:23:38.8993531), LayerElapsedSeconds=21.252228, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 319, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.122245218026045, Elapsed = 06:54:31.7054238, TimeTotal = 11:53:12.0589277, Remaining = 04:58:40.3535039, Incomplete = False, SoftCount = 566, LayerPrintDone = 319, WeightsDone = 319, WeightDone = 02:27:59.8908857, WeightTotal = 03:43:04.5578923, WeightTotalEstimate = 03:43:04.5578924, LayerRecoatElapsed = 02:11:52.6387494, LayerRecoatDelays = 00:22:12, LayerRecoatPrintLayersElapsed = 01:28:51.6444734, LayerRecoatNoDelayAverage = 00:00:14.8212584, StreamingElapsed = 02:23:38.8993531, ObjectLayerOverheadAverageDuration = 00:00:00.0223598, TimeLayers = 07:08:22.1356585, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:55.7474805, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:36.7635920, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.3188760, JobElapsed = 03:52:37.6777478, JobTotal = 06:25:18.0531905, WeightEstimate = 01:15:04.6670067 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:27:32. coolingEstimate=02:29:55.7474805 [PrintingService.cs@1912] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.122245218026045;StartedAtUtc;06:54:31.7054238;11:53:12.0589277;04:58:40.3535039;False;566;319;319;02:27:59.8908857;03:43:04.5578923;03:43:04.5578924;02:11:52.6387494;00:22:12;01:28:51.6444734;00:00:14.8212584;02:23:38.8993531;00:00:00.0223598;07:08:22.1356585;00:00:00;02:29:55.7474805;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:36.7635920;00:00:00;00:04:27.3188760;03:52:37.6777478;06:25:18.0531905 [PrintingService.cs@1918] +06/28/2026 03:28:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 319. PrevPreviewWeight=LayerWeight { Index = 318, FillTotalRelative = 0.087520434548717, FillMaxRelative = 0.27907164029415676, TimeFromPreview = 17.777606547089416, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.27907164029415676, PreviewWeight=LayerWeight { Index = 319, FillTotalRelative = 0.08745008639700418, FillMaxRelative = 0.2778254261789358, TimeFromPreview = 18.344057349065842, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.9804189. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531598, LCompressed = 1419270 } [McuMovementClient.cs@491] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633900. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:56.0446686. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531598, LCompressed = 1419270 } [McuMovementClient.cs@491] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:56.0588871. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531598, LCompressed = 1419270 } [McuMovementClient.cs@491] +06/28/2026 03:28:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3874.349119017464, PrevLayerFillRatio=0.27907164029415676: Z1=99.15414646612746, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 35904.16531993517, Z2 = 36450 } } [LayerClient.cs@969] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5953724592652 (5953724592652 @ 0) for mcu = 49600.571682 [27/06/2026 00:53:36] (49614.371605433334 sec) to 5955055883084 (from now=5954935883084, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5953724592652 (5953724592652 @ 0) for mcu = 49600.571682 [27/06/2026 00:53:36] (49614.371605433334 sec) to 5955055883084 (from external timestamp, flags=None, requested=5955055883084 (5955055883084 @ 0) for mcu = 49611.666011 [27/06/2026 00:53:47] (49625.46569236667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5953724592652 (5953724592652 @ 0) for mcu = 49600.571682 [27/06/2026 00:53:36] (49614.371605433334 sec) to 5955055883084 (from external timestamp, flags=None, requested=5955055883084 (5955055883084 @ 0) for mcu = 49611.666011 [27/06/2026 00:53:47] (49625.46569236667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:28:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0780218. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:29:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11.0780218. Loops = 45. GC duration = 00:00:00.3499510. SinceCollect=00:01:07.5865206. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531598, LCompressed = 1419270 } [McuMovementClient.cs@478] +06/28/2026 03:29:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=124680, gen1=31066, gen2=905, LatencyMode=Interactive, FreeMemory=5735284736, Live=351154568, HeapSizeBytes=357227784, FragmentedBytes=6604984, TotalCommittedBytes=365887488, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:29:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:29:04 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (171 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:29:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:29:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:29:14 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 319, Weight=LayerWeight { Index = 319, FillTotalRelative = 0.08745008639700418, FillMaxRelative = 0.2778254261789358, TimeFromPreview = 18.344057349065842, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:29:14 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:29:14 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5957548440221, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:29:14 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5957668443042, flushed existing data. Was Timestamp=0, Now=5957548445679, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:29:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:29:14 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:29:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5954921573839 (5954921573839 @ 0) for mcu = 49610.546749 [27/06/2026 00:53:46] (49624.34644865833 sec) to 5957668466881 (from now=5957548466881, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5954921525839 (1524459910614898 @ 8) for mcu = 49610.546349 [27/06/2026 00:53:46] (49624.346048662046 sec) to 5957668466881 (from now=5957548466881, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5954921525839 (1524459910614898 @ 8) for mcu = 49610.546349 [27/06/2026 00:53:46] (49624.346048662046 sec) to 5957668466881 (from now=5957548466881, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2521800. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531599, LCompressed = 1419272 } [McuMovementClient.cs@491] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:29:15 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 319 [PrintingService.cs@2118] +06/28/2026 03:29:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2649875. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531599, LCompressed = 1419272 } [McuMovementClient.cs@491] +06/28/2026 03:29:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 320, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.195898438257565, Elapsed = 06:54:54.5988796, TimeTotal = 11:52:57.2395438, Remaining = 04:58:02.6406642, Incomplete = False, SoftCount = 566, LayerPrintDone = 320, WeightsDone = 320, WeightDone = 02:28:00.9316561, WeightTotal = 03:42:46.0069185, WeightTotalEstimate = 03:42:46.0069186, LayerRecoatElapsed = 02:12:14.4914348, LayerRecoatDelays = 00:22:15, LayerRecoatPrintLayersElapsed = 01:29:13.4971588, LayerRecoatNoDelayAverage = 00:00:14.8303178, StreamingElapsed = 02:23:39.9177637, ObjectLayerOverheadAverageDuration = 00:00:00.0223598, TimeLayers = 07:08:11.1583371, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:51.9054180, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:37.9413140, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.4547670, JobElapsed = 03:53:00.5633917, JobTotal = 06:25:05.7622561, WeightEstimate = 01:14:45.0752625 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:27:18. coolingEstimate=02:29:51.9054180 [PrintingService.cs@1912] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.195898438257565;StartedAtUtc;06:54:54.5988796;11:52:57.2395438;04:58:02.6406642;False;566;320;320;02:28:00.9316561;03:42:46.0069185;03:42:46.0069186;02:12:14.4914348;00:22:15;01:29:13.4971588;00:00:14.8303178;02:23:39.9177637;00:00:00.0223598;07:08:11.1583371;00:00:00;02:29:51.9054180;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:37.9413140;00:00:00;00:04:27.4547670;03:53:00.5633917;06:25:05.7622561 [PrintingService.cs@1918] +06/28/2026 03:29:15 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 319. PreviewWeight=LayerWeight { Index = 319, FillTotalRelative = 0.08745008639700418, FillMaxRelative = 0.2778254261789358, TimeFromPreview = 18.344057349065842, EnergyDensityIncreaseFactor = 0 }, FillArea=5185.310422508419, PreviewFillRatio=0.2778254261789358, Results=3, StreamingSeconds (preview) = 18.344057349065842, StreamingSeconds (extrapolated) = 18.569384358476366, StreamingSeconds (no overhead) = 1.0184106 (02:23:39.9177637), LayerElapsedSeconds=22.8855537, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 320, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.195904383911426, Elapsed = 06:54:54.5923517, TimeTotal = 11:52:57.2239563, Remaining = 04:58:02.6316046, Incomplete = False, SoftCount = 566, LayerPrintDone = 320, WeightsDone = 320, WeightDone = 02:28:00.9251282, WeightTotal = 03:42:45.9953722, WeightTotalEstimate = 03:42:45.9953722, LayerRecoatElapsed = 02:12:14.4914348, LayerRecoatDelays = 00:22:15, LayerRecoatPrintLayersElapsed = 01:29:13.4971588, LayerRecoatNoDelayAverage = 00:00:14.8303178, StreamingElapsed = 02:23:39.9177637, ObjectLayerOverheadAverageDuration = 00:00:00.0223394, TimeLayers = 07:08:11.1467908, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:51.9013768, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:37.9413140, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.4547670, JobElapsed = 03:53:00.5656906, JobTotal = 06:25:05.7507098, WeightEstimate = 01:14:45.0702440 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:27:18. coolingEstimate=02:29:51.9013768 [PrintingService.cs@1912] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.195904383911426;StartedAtUtc;06:54:54.5923517;11:52:57.2239563;04:58:02.6316046;False;566;320;320;02:28:00.9251282;03:42:45.9953722;03:42:45.9953722;02:12:14.4914348;00:22:15;01:29:13.4971588;00:00:14.8303178;02:23:39.9177637;00:00:00.0223394;07:08:11.1467908;00:00:00;02:29:51.9013768;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:37.9413140;00:00:00;00:04:27.4547670;03:53:00.5656906;06:25:05.7507098 [PrintingService.cs@1918] +06/28/2026 03:29:15 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 320. PrevPreviewWeight=LayerWeight { Index = 319, FillTotalRelative = 0.08745008639700418, FillMaxRelative = 0.2778254261789358, TimeFromPreview = 18.344057349065842, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.2778254261789358, PreviewWeight=LayerWeight { Index = 320, FillTotalRelative = 0.0878303131153676, FillMaxRelative = 0.28005964202078903, TimeFromPreview = 17.43849307307866, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2798397. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531599, LCompressed = 1419272 } [McuMovementClient.cs@491] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632266. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3470029. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531599, LCompressed = 1419272 } [McuMovementClient.cs@491] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3604211. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531599, LCompressed = 1419272 } [McuMovementClient.cs@491] +06/28/2026 03:29:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3872.329077430027, PrevLayerFillRatio=0.2778254261789358: Z1=99.10244862133457, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36003.26776855651, Z2 = 36550 } } [LayerClient.cs@969] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5956275340962 (5956275340962 @ 0) for mcu = 49621.828393 [27/06/2026 00:53:57] (49635.62784135 sec) to 5957802422327 (from now=5957682422327, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5956275340962 (5956275340962 @ 0) for mcu = 49621.828393 [27/06/2026 00:53:57] (49635.62784135 sec) to 5957802422327 (from external timestamp, flags=None, requested=5957802422327 (5957802422327 @ 0) for mcu = 49634.554352 [27/06/2026 00:54:10] (49648.35351939167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5956275340962 (5956275340962 @ 0) for mcu = 49621.828393 [27/06/2026 00:53:57] (49635.62784135 sec) to 5957802422327 (from external timestamp, flags=None, requested=5957802422327 (5957802422327 @ 0) for mcu = 49634.554352 [27/06/2026 00:54:10] (49648.35351939167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:29:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0613331. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:22.5357320. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531599, LCompressed = 1419272 } [McuMovementClient.cs@491] +06/28/2026 03:29:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:29:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0559886 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:29:31 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:29:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:29:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 320, Weight=LayerWeight { Index = 320, FillTotalRelative = 0.0878303131153676, FillMaxRelative = 0.28005964202078903, TimeFromPreview = 17.43849307307866, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:29:34 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:29:34 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5959937008852, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:29:34 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5960057012010, flushed existing data. Was Timestamp=0, Now=5959937014779, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:29:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:29:34 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:29:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5957668514881 (5957668514881 @ 0) for mcu = 49633.438484 [27/06/2026 00:54:09] (49647.23762400833 sec) to 5960057034852 (from now=5959937034852, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5957668466881 (1525163127521634 @ 8) for mcu = 49633.438084 [27/06/2026 00:54:09] (49647.23722401152 sec) to 5960057034852 (from now=5959937034852, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5957668466881 (1525163127521634 @ 8) for mcu = 49633.438084 [27/06/2026 00:54:09] (49647.23722401152 sec) to 5960057034852 (from now=5959937034852, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1575525. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531600, LCompressed = 1419274 } [McuMovementClient.cs@491] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:29:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 320 [PrintingService.cs@2118] +06/28/2026 03:29:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1684459. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531600, LCompressed = 1419274 } [McuMovementClient.cs@491] +06/28/2026 03:29:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 321, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.272585537455015, Elapsed = 06:55:14.5032178, TimeTotal = 11:52:35.1017138, Remaining = 04:57:20.5984960, Incomplete = False, SoftCount = 566, LayerPrintDone = 321, WeightsDone = 321, WeightDone = 02:28:01.9651944, WeightTotal = 03:42:27.6581739, WeightTotalEstimate = 03:42:27.6581739, LayerRecoatElapsed = 02:12:33.3622347, LayerRecoatDelays = 00:22:18, LayerRecoatPrintLayersElapsed = 01:29:32.3679586, LayerRecoatNoDelayAverage = 00:00:14.8326508, StreamingElapsed = 02:23:40.9354905, ObjectLayerOverheadAverageDuration = 00:00:00.0223394, TimeLayers = 07:07:54.7599445, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:46.1659806, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:38.2446040, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.4897620, JobElapsed = 03:53:20.4667463, JobTotal = 06:24:49.0255785, WeightEstimate = 01:14:25.6929795 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:26:55. coolingEstimate=02:29:46.1659806 [PrintingService.cs@1912] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.272585537455015;StartedAtUtc;06:55:14.5032178;11:52:35.1017138;04:57:20.5984960;False;566;321;321;02:28:01.9651944;03:42:27.6581739;03:42:27.6581739;02:12:33.3622347;00:22:18;01:29:32.3679586;00:00:14.8326508;02:23:40.9354905;00:00:00.0223394;07:07:54.7599445;00:00:00;02:29:46.1659806;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:38.2446040;00:00:00;00:04:27.4897620;03:53:20.4667463;06:24:49.0255785 [PrintingService.cs@1918] +06/28/2026 03:29:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 320. PreviewWeight=LayerWeight { Index = 320, FillTotalRelative = 0.0878303131153676, FillMaxRelative = 0.28005964202078903, TimeFromPreview = 17.43849307307866, EnergyDensityIncreaseFactor = 0 }, FillArea=7816.621885865665, PreviewFillRatio=0.28005964202078903, Results=3, StreamingSeconds (preview) = 17.43849307307866, StreamingSeconds (extrapolated) = 17.677786990803803, StreamingSeconds (no overhead) = 1.0177268 (02:23:40.9354905), LayerElapsedSeconds=19.9008103, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 321, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.27259233837325, Elapsed = 06:55:14.4957064, TimeTotal = 11:52:35.0838338, Remaining = 04:57:20.5881274, Incomplete = False, SoftCount = 566, LayerPrintDone = 321, WeightsDone = 321, WeightDone = 02:28:01.9576830, WeightTotal = 03:42:27.6449295, WeightTotalEstimate = 03:42:27.6449295, LayerRecoatElapsed = 02:12:33.3622347, LayerRecoatDelays = 00:22:18, LayerRecoatPrintLayersElapsed = 01:29:32.3679586, LayerRecoatNoDelayAverage = 00:00:14.8326508, StreamingElapsed = 02:23:40.9354905, ObjectLayerOverheadAverageDuration = 00:00:00.0223160, TimeLayers = 07:07:54.7467001, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:46.1613450, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:38.2446040, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.4897620, JobElapsed = 03:53:20.4696103, JobTotal = 06:24:49.0123341, WeightEstimate = 01:14:25.6872465 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:26:55. coolingEstimate=02:29:46.1613450 [PrintingService.cs@1912] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.27259233837325;StartedAtUtc;06:55:14.4957064;11:52:35.0838338;04:57:20.5881274;False;566;321;321;02:28:01.9576830;03:42:27.6449295;03:42:27.6449295;02:12:33.3622347;00:22:18;01:29:32.3679586;00:00:14.8326508;02:23:40.9354905;00:00:00.0223160;07:07:54.7467001;00:00:00;02:29:46.1613450;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:38.2446040;00:00:00;00:04:27.4897620;03:53:20.4696103;06:24:49.0123341 [PrintingService.cs@1918] +06/28/2026 03:29:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 321. PrevPreviewWeight=LayerWeight { Index = 320, FillTotalRelative = 0.0878303131153676, FillMaxRelative = 0.28005964202078903, TimeFromPreview = 17.43849307307866, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.28005964202078903, PreviewWeight=LayerWeight { Index = 321, FillTotalRelative = 0.087822504265298, FillMaxRelative = 0.2787584332338421, TimeFromPreview = 18.365524398693687, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1841605. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531600, LCompressed = 1419274 } [McuMovementClient.cs@491] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633708. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.2482092. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531600, LCompressed = 1419274 } [McuMovementClient.cs@491] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.2592378. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531600, LCompressed = 1419274 } [McuMovementClient.cs@491] +06/28/2026 03:29:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3875.9506131362364, PrevLayerFillRatio=0.28005964202078903: Z1=99.19513264923572, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36102.46290120574, Z2 = 36650 } } [LayerClient.cs@969] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5959021867908 (5959021867908 @ 0) for mcu = 49644.716666 [27/06/2026 00:54:20] (49658.5155659 sec) to 5960190254938 (from now=5960070254938, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5959021867908 (5959021867908 @ 0) for mcu = 49644.716666 [27/06/2026 00:54:20] (49658.5155659 sec) to 5960190254938 (from external timestamp, flags=None, requested=5960190254938 (5960190254938 @ 0) for mcu = 49654.453446 [27/06/2026 00:54:30] (49668.25212448333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5959021867908 (5959021867908 @ 0) for mcu = 49644.716666 [27/06/2026 00:54:20] (49658.5155659 sec) to 5960190254938 (from external timestamp, flags=None, requested=5960190254938 (5960190254938 @ 0) for mcu = 49654.453446 [27/06/2026 00:54:30] (49668.25212448333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:29:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0603618. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:42.4320999. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531600, LCompressed = 1419274 } [McuMovementClient.cs@491] +06/28/2026 03:29:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:29:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:29:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:29:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 321, Weight=LayerWeight { Index = 321, FillTotalRelative = 0.087822504265298, FillMaxRelative = 0.2787584332338421, TimeFromPreview = 18.365524398693687, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:29:54 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:29:54 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5962390076561, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:29:54 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5962510078593, flushed existing data. Was Timestamp=0, Now=5962390081272, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:29:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:29:54 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:29:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5960057082852 (5960057082852 @ 0) for mcu = 49653.343638 [27/06/2026 00:54:29] (49667.1423571 sec) to 5962510102200 (from now=5962390102200, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5960057034852 (1525774600922195 @ 8) for mcu = 49653.343238 [27/06/2026 00:54:29] (49667.1419571027 sec) to 5962510102200 (from now=5962390102200, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5960057034852 (1525774600922195 @ 8) for mcu = 49653.343238 [27/06/2026 00:54:29] (49667.1419571027 sec) to 5962510102200 (from now=5962390102200, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.5997044. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531601, LCompressed = 1419276 } [McuMovementClient.cs@491] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:29:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 321 [PrintingService.cs@2118] +06/28/2026 03:29:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.6126220. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531601, LCompressed = 1419276 } [McuMovementClient.cs@491] +06/28/2026 03:29:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 322, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.34927750775096, Elapsed = 06:55:34.9443716, TimeTotal = 11:52:13.9385107, Remaining = 04:56:38.9941391, Incomplete = False, SoftCount = 566, LayerPrintDone = 322, WeightsDone = 322, WeightDone = 02:28:02.9999457, WeightTotal = 03:42:09.0384792, WeightTotalEstimate = 03:42:09.0384792, LayerRecoatElapsed = 02:12:52.7686372, LayerRecoatDelays = 00:22:21, LayerRecoatPrintLayersElapsed = 01:29:51.7743440, LayerRecoatNoDelayAverage = 00:00:14.8361714, StreamingElapsed = 02:23:41.9554372, ObjectLayerOverheadAverageDuration = 00:00:00.0223160, TimeLayers = 07:07:39.0834978, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:40.6792242, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:38.7022820, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.5425710, JobElapsed = 03:53:40.9112617, JobTotal = 06:24:32.8386448, WeightEstimate = 01:14:06.0385335 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:26:34. coolingEstimate=02:29:40.6792242 [PrintingService.cs@1912] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.34927750775096;StartedAtUtc;06:55:34.9443716;11:52:13.9385107;04:56:38.9941391;False;566;322;322;02:28:02.9999457;03:42:09.0384792;03:42:09.0384792;02:12:52.7686372;00:22:21;01:29:51.7743440;00:00:14.8361714;02:23:41.9554372;00:00:00.0223160;07:07:39.0834978;00:00:00;02:29:40.6792242;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:38.7022820;00:00:00;00:04:27.5425710;03:53:40.9112617;06:24:32.8386448 [PrintingService.cs@1918] +06/28/2026 03:29:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 321. PreviewWeight=LayerWeight { Index = 321, FillTotalRelative = 0.087822504265298, FillMaxRelative = 0.2787584332338421, TimeFromPreview = 18.365524398693687, EnergyDensityIncreaseFactor = 0 }, FillArea=8426.840679497695, PreviewFillRatio=0.2787584332338421, Results=3, StreamingSeconds (preview) = 18.365524398693687, StreamingSeconds (extrapolated) = 18.626397021343934, StreamingSeconds (no overhead) = 1.0199467 (02:23:41.9554372), LayerElapsedSeconds=20.4413751, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 322, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.34928121723774, Elapsed = 06:55:34.9402499, TimeTotal = 11:52:13.9287301, Remaining = 04:56:38.9884802, Incomplete = False, SoftCount = 566, LayerPrintDone = 322, WeightsDone = 322, WeightDone = 02:28:02.9958240, WeightTotal = 03:42:09.0312343, WeightTotalEstimate = 03:42:09.0312344, LayerRecoatElapsed = 02:12:52.7686372, LayerRecoatDelays = 00:22:21, LayerRecoatPrintLayersElapsed = 01:29:51.7743440, LayerRecoatNoDelayAverage = 00:00:14.8361714, StreamingElapsed = 02:23:41.9554372, ObjectLayerOverheadAverageDuration = 00:00:00.0223032, TimeLayers = 07:07:39.0762529, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:40.6766885, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:38.7022820, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.5425710, JobElapsed = 03:53:40.9128729, JobTotal = 06:24:32.8313999, WeightEstimate = 01:14:06.0354104 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:26:34. coolingEstimate=02:29:40.6766885 [PrintingService.cs@1912] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.34928121723774;StartedAtUtc;06:55:34.9402499;11:52:13.9287301;04:56:38.9884802;False;566;322;322;02:28:02.9958240;03:42:09.0312343;03:42:09.0312344;02:12:52.7686372;00:22:21;01:29:51.7743440;00:00:14.8361714;02:23:41.9554372;00:00:00.0223032;07:07:39.0762529;00:00:00;02:29:40.6766885;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:38.7022820;00:00:00;00:04:27.5425710;03:53:40.9128729;06:24:32.8313999 [PrintingService.cs@1918] +06/28/2026 03:29:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 322. PrevPreviewWeight=LayerWeight { Index = 321, FillTotalRelative = 0.087822504265298, FillMaxRelative = 0.2787584332338421, TimeFromPreview = 18.365524398693687, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.2787584332338421, PreviewWeight=LayerWeight { Index = 322, FillTotalRelative = 0.08825144247953971, FillMaxRelative = 0.2811916635813122, TimeFromPreview = 17.43241235889397, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.6279809. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531601, LCompressed = 1419276 } [McuMovementClient.cs@491] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0614216. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.6952309. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531601, LCompressed = 1419276 } [McuMovementClient.cs@491] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.7083110. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531601, LCompressed = 1419276 } [McuMovementClient.cs@491] +06/28/2026 03:29:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3873.8414283408883, PrevLayerFillRatio=0.2787584332338421: Z1=99.14115340996285, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36201.6040546157, Z2 = 36750 } } [LayerClient.cs@969] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5961409698147 (5961409698147 @ 0) for mcu = 49664.615658 [27/06/2026 00:54:40] (49678.414151225 sec) to 5962644020296 (from now=5962524020296, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5961409698147 (5961409698147 @ 0) for mcu = 49664.615658 [27/06/2026 00:54:40] (49678.414151225 sec) to 5962644020296 (from external timestamp, flags=None, requested=5962644020296 (5962644020296 @ 0) for mcu = 49674.901900 [27/06/2026 00:54:50] (49688.700169133335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5961409698147 (5961409698147 @ 0) for mcu = 49664.615658 [27/06/2026 00:54:40] (49678.414151225 sec) to 5962644020296 (from external timestamp, flags=None, requested=5962644020296 (5962644020296 @ 0) for mcu = 49674.901900 [27/06/2026 00:54:50] (49688.700169133335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:29:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0787627. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:30:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11.0787627. Loops = 45. GC duration = 00:00:00.3633871. SinceCollect=00:01:03.2457847. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531601, LCompressed = 1419276 } [McuMovementClient.cs@478] +06/28/2026 03:30:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=124863, gen1=31209, gen2=906, LatencyMode=Interactive, FreeMemory=5723537408, Live=352939704, HeapSizeBytes=357097832, FragmentedBytes=4650296, TotalCommittedBytes=367378432, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:30:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:30:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (122 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:30:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:30:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:30:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 322, Weight=LayerWeight { Index = 322, FillTotalRelative = 0.08825144247953971, FillMaxRelative = 0.2811916635813122, TimeFromPreview = 17.43241235889397, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:30:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:30:18 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5965257233705, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:30:18 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5965377236457, flushed existing data. Was Timestamp=0, Now=5965257239045, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:30:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:30:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:30:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5962510150200 (5962510150200 @ 0) for mcu = 49673.786285 [27/06/2026 00:54:49] (49687.584585 sec) to 5965377261165 (from now=5965257261165, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5962510102200 (1526402586163417 @ 8) for mcu = 49673.785885 [27/06/2026 00:54:49] (49687.584185007065 sec) to 5965377261165 (from now=5965257261165, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5962510102200 (1526402586163417 @ 8) for mcu = 49673.785885 [27/06/2026 00:54:49] (49687.584185007065 sec) to 5965377261165 (from now=5965257261165, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.2496206. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531602, LCompressed = 1419278 } [McuMovementClient.cs@491] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:30:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 322 [PrintingService.cs@2118] +06/28/2026 03:30:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.2621470. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531602, LCompressed = 1419278 } [McuMovementClient.cs@491] +06/28/2026 03:30:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 323, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.4226545847905, Elapsed = 06:55:58.8414652, TimeTotal = 11:52:01.1697972, Remaining = 04:56:02.3283320, Incomplete = False, SoftCount = 566, LayerPrintDone = 323, WeightsDone = 323, WeightDone = 02:28:04.0360669, WeightTotal = 03:41:50.2035251, WeightTotalEstimate = 03:41:50.2035252, LayerRecoatElapsed = 02:13:15.6296096, LayerRecoatDelays = 00:22:24, LayerRecoatPrintLayersElapsed = 01:30:14.6353164, LayerRecoatNoDelayAverage = 00:00:14.8473875, StreamingElapsed = 02:23:42.9733769, ObjectLayerOverheadAverageDuration = 00:00:00.0223032, TimeLayers = 07:07:29.6251915, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:37.3688170, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.1603750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7108125, JobElapsed = 03:54:04.8068827, JobTotal = 06:24:21.7540040, WeightEstimate = 01:13:46.1674583 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:26:22. coolingEstimate=02:29:37.3688170 [PrintingService.cs@1912] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.4226545847905;StartedAtUtc;06:55:58.8414652;11:52:01.1697972;04:56:02.3283320;False;566;323;323;02:28:04.0360669;03:41:50.2035251;03:41:50.2035252;02:13:15.6296096;00:22:24;01:30:14.6353164;00:00:14.8473875;02:23:42.9733769;00:00:00.0223032;07:07:29.6251915;00:00:00;02:29:37.3688170;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.1603750;00:00:00;00:04:27.7108125;03:54:04.8068827;06:24:21.7540040 [PrintingService.cs@1918] +06/28/2026 03:30:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 322. PreviewWeight=LayerWeight { Index = 322, FillTotalRelative = 0.08825144247953971, FillMaxRelative = 0.2811916635813122, TimeFromPreview = 17.43241235889397, EnergyDensityIncreaseFactor = 0 }, FillArea=8421.83186677785, PreviewFillRatio=0.2811916635813122, Results=3, StreamingSeconds (preview) = 17.43241235889397, StreamingSeconds (extrapolated) = 17.687837342885757, StreamingSeconds (no overhead) = 1.0179397 (02:23:42.9733769), LayerElapsedSeconds=23.8940066, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 323, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.4226595822532, Elapsed = 06:55:58.8358774, TimeTotal = 11:52:01.1565784, Remaining = 04:56:02.3207010, Incomplete = False, SoftCount = 566, LayerPrintDone = 323, WeightsDone = 323, WeightDone = 02:28:04.0304791, WeightTotal = 03:41:50.1937334, WeightTotalEstimate = 03:41:50.1937334, LayerRecoatElapsed = 02:13:15.6296096, LayerRecoatDelays = 00:22:24, LayerRecoatPrintLayersElapsed = 01:30:14.6353164, LayerRecoatNoDelayAverage = 00:00:14.8473875, StreamingElapsed = 02:23:42.9733769, ObjectLayerOverheadAverageDuration = 00:00:00.0222859, TimeLayers = 07:07:29.6153998, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:37.3653899, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.1603750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7108125, JobElapsed = 03:54:04.8089451, JobTotal = 06:24:21.7442123, WeightEstimate = 01:13:46.1632543 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:26:22. coolingEstimate=02:29:37.3653899 [PrintingService.cs@1912] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.4226595822532;StartedAtUtc;06:55:58.8358774;11:52:01.1565784;04:56:02.3207010;False;566;323;323;02:28:04.0304791;03:41:50.1937334;03:41:50.1937334;02:13:15.6296096;00:22:24;01:30:14.6353164;00:00:14.8473875;02:23:42.9733769;00:00:00.0222859;07:07:29.6153998;00:00:00;02:29:37.3653899;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.1603750;00:00:00;00:04:27.7108125;03:54:04.8089451;06:24:21.7442123 [PrintingService.cs@1918] +06/28/2026 03:30:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 323. PrevPreviewWeight=LayerWeight { Index = 322, FillTotalRelative = 0.08825144247953971, FillMaxRelative = 0.2811916635813122, TimeFromPreview = 17.43241235889397, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.2811916635813122, PreviewWeight=LayerWeight { Index = 323, FillTotalRelative = 0.08814153086254507, FillMaxRelative = 0.27961368829804745, TimeFromPreview = 18.391849334078387, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.2783528. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531602, LCompressed = 1419278 } [McuMovementClient.cs@491] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629857. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.3420038. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531602, LCompressed = 1419278 } [McuMovementClient.cs@491] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.3558601. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531602, LCompressed = 1419278 } [McuMovementClient.cs@491] +06/28/2026 03:30:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3877.7855551435546, PrevLayerFillRatio=0.2811916635813122: Z1=99.24209333939588, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36300.8461479551, Z2 = 36850 } } [LayerClient.cs@969] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5963863438869 (5963863438869 @ 0) for mcu = 49685.063944 [27/06/2026 00:55:01] (49698.861990575 sec) to 5965511263447 (from now=5965391263447, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5963863438869 (5963863438869 @ 0) for mcu = 49685.063944 [27/06/2026 00:55:01] (49698.861990575 sec) to 5965511263447 (from external timestamp, flags=None, requested=5965511263447 (5965511263447 @ 0) for mcu = 49698.796114 [27/06/2026 00:55:14] (49712.59386205833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5963863438869 (5963863438869 @ 0) for mcu = 49685.063944 [27/06/2026 00:55:01] (49698.861990575 sec) to 5965511263447 (from external timestamp, flags=None, requested=5965511263447 (5965511263447 @ 0) for mcu = 49698.796114 [27/06/2026 00:55:14] (49712.59386205833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:30:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1399121 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:30:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0717719. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.5297098. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531602, LCompressed = 1419278 } [McuMovementClient.cs@491] +06/28/2026 03:30:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:30:34 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:30:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:30:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 323, Weight=LayerWeight { Index = 323, FillTotalRelative = 0.08814153086254507, FillMaxRelative = 0.27961368829804745, TimeFromPreview = 18.391849334078387, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:30:37 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5967526398264, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:30:37 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:30:37 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5967646403623, flushed existing data. Was Timestamp=0, Now=5967526406266, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:30:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:30:37 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:30:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5965377309165 (5965377309165 @ 0) for mcu = 49697.679823 [27/06/2026 00:55:13] (49711.477576375 sec) to 5967646421904 (from now=5967526421904, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5965377261165 (1527136578858269 @ 8) for mcu = 49697.679423 [27/06/2026 00:55:13] (49711.47717637594 sec) to 5967646421904 (from now=5967526421904, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5965377261165 (1527136578858269 @ 8) for mcu = 49697.679423 [27/06/2026 00:55:13] (49711.47717637594 sec) to 5967646421904 (from now=5967526421904, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1588456. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531603, LCompressed = 1419280 } [McuMovementClient.cs@491] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:30:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 323 [PrintingService.cs@2118] +06/28/2026 03:30:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1711730. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531603, LCompressed = 1419280 } [McuMovementClient.cs@491] +06/28/2026 03:30:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 324, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.50159114696057, Elapsed = 06:56:17.7508291, TimeTotal = 11:51:35.8486759, Remaining = 04:55:18.0978468, Incomplete = False, SoftCount = 566, LayerPrintDone = 324, WeightsDone = 324, WeightDone = 02:28:05.0790862, WeightTotal = 03:41:31.4118503, WeightTotalEstimate = 03:41:31.4118503, LayerRecoatElapsed = 02:13:33.4959542, LayerRecoatDelays = 00:22:27, LayerRecoatPrintLayersElapsed = 01:30:32.5016611, LayerRecoatNoDelayAverage = 00:00:14.8474297, StreamingElapsed = 02:23:43.9996981, ObjectLayerOverheadAverageDuration = 00:00:00.0222859, TimeLayers = 07:07:10.8688053, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:30.8040819, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.1658610, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7114455, JobElapsed = 03:54:23.7162855, JobTotal = 06:24:02.9914988, WeightEstimate = 01:13:26.3327641 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:56. coolingEstimate=02:29:30.8040819 [PrintingService.cs@1912] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.50159114696057;StartedAtUtc;06:56:17.7508291;11:51:35.8486759;04:55:18.0978468;False;566;324;324;02:28:05.0790862;03:41:31.4118503;03:41:31.4118503;02:13:33.4959542;00:22:27;01:30:32.5016611;00:00:14.8474297;02:23:43.9996981;00:00:00.0222859;07:07:10.8688053;00:00:00;02:29:30.8040819;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.1658610;00:00:00;00:04:27.7114455;03:54:23.7162855;06:24:02.9914988 [PrintingService.cs@1918] +06/28/2026 03:30:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 323. PreviewWeight=LayerWeight { Index = 323, FillTotalRelative = 0.08814153086254507, FillMaxRelative = 0.27961368829804745, TimeFromPreview = 18.391849334078387, EnergyDensityIncreaseFactor = 0 }, FillArea=8429.849892756964, PreviewFillRatio=0.27961368829804745, Results=3, StreamingSeconds (preview) = 18.391849334078387, StreamingSeconds (extrapolated) = 18.808204309736684, StreamingSeconds (no overhead) = 1.0263212 (02:23:43.9996981), LayerElapsedSeconds=18.9083219, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 324, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.50159523812434, Elapsed = 06:56:17.7462282, TimeTotal = 11:51:35.8378255, Remaining = 04:55:18.0915973, Incomplete = False, SoftCount = 566, LayerPrintDone = 324, WeightsDone = 324, WeightDone = 02:28:05.0744853, WeightTotal = 03:41:31.4038130, WeightTotalEstimate = 03:41:31.4038131, LayerRecoatElapsed = 02:13:33.4959542, LayerRecoatDelays = 00:22:27, LayerRecoatPrintLayersElapsed = 01:30:32.5016611, LayerRecoatNoDelayAverage = 00:00:14.8474297, StreamingElapsed = 02:23:43.9996981, ObjectLayerOverheadAverageDuration = 00:00:00.0222717, TimeLayers = 07:07:10.8607680, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:30.8012688, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.1658610, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7114455, JobElapsed = 03:54:23.7186428, JobTotal = 06:24:02.9834615, WeightEstimate = 01:13:26.3293278 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:56. coolingEstimate=02:29:30.8012688 [PrintingService.cs@1912] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.50159523812434;StartedAtUtc;06:56:17.7462282;11:51:35.8378255;04:55:18.0915973;False;566;324;324;02:28:05.0744853;03:41:31.4038130;03:41:31.4038131;02:13:33.4959542;00:22:27;01:30:32.5016611;00:00:14.8474297;02:23:43.9996981;00:00:00.0222717;07:07:10.8607680;00:00:00;02:29:30.8012688;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.1658610;00:00:00;00:04:27.7114455;03:54:23.7186428;06:24:02.9834615 [PrintingService.cs@1918] +06/28/2026 03:30:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 324. PrevPreviewWeight=LayerWeight { Index = 323, FillTotalRelative = 0.08814153086254507, FillMaxRelative = 0.27961368829804745, TimeFromPreview = 18.391849334078387, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.27961368829804745, PreviewWeight=LayerWeight { Index = 324, FillTotalRelative = 0.0885118321656822, FillMaxRelative = 0.28205830609099175, TimeFromPreview = 17.603779847157025, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.1997650. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531603, LCompressed = 1419280 } [McuMovementClient.cs@491] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634140. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.2638708. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531603, LCompressed = 1419280 } [McuMovementClient.cs@491] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.2771871. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531603, LCompressed = 1419280 } [McuMovementClient.cs@491] +06/28/2026 03:30:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3875.227747735333, PrevLayerFillRatio=0.27961368829804745: Z1=99.17663274134547, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36400.02278069644, Z2 = 36950 } } [LayerClient.cs@969] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5966730718660 (5966730718660 @ 0) for mcu = 49708.958499 [27/06/2026 00:55:24] (49722.755988833334 sec) to 5967781653377 (from now=5967661653377, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5966730718660 (5966730718660 @ 0) for mcu = 49708.958499 [27/06/2026 00:55:24] (49722.755988833334 sec) to 5967781653377 (from external timestamp, flags=None, requested=5967781653377 (5967781653377 @ 0) for mcu = 49717.716483 [27/06/2026 00:55:33] (49731.51377814166 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5966730718660 (5966730718660 @ 0) for mcu = 49708.958499 [27/06/2026 00:55:24] (49722.755988833334 sec) to 5967781653377 (from external timestamp, flags=None, requested=5967781653377 (5967781653377 @ 0) for mcu = 49717.716483 [27/06/2026 00:55:33] (49731.51377814166 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0698679. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:42.4495076. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531603, LCompressed = 1419280 } [McuMovementClient.cs@491] +06/28/2026 03:30:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:30:55 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:30:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:30:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 324, Weight=LayerWeight { Index = 324, FillTotalRelative = 0.0885118321656822, FillMaxRelative = 0.28205830609099175, TimeFromPreview = 17.603779847157025, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:30:58 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5970016811656, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:30:58 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5970136816108, flushed existing data. Was Timestamp=0, Now=5970016818851, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:30:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:30:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:30:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:30:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5967646469904 (5967646469904 @ 0) for mcu = 49716.589956 [27/06/2026 00:55:32] (49730.3872492 sec) to 5970136833518 (from now=5970016833518, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5967646421904 (1527717484007448 @ 8) for mcu = 49716.589556 [27/06/2026 00:55:32] (49730.38684920078 sec) to 5970136833518 (from now=5970016833518, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5967646421904 (1527717484007448 @ 8) for mcu = 49716.589556 [27/06/2026 00:55:32] (49730.38684920078 sec) to 5970136833518 (from now=5970016833518, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.9147448. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531604, LCompressed = 1419282 } [McuMovementClient.cs@491] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:30:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 324 [PrintingService.cs@2118] +06/28/2026 03:30:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.9260290. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531604, LCompressed = 1419282 } [McuMovementClient.cs@491] +06/28/2026 03:30:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 325, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.57660412153426, Elapsed = 06:56:38.5064383, TimeTotal = 11:51:16.6058108, Remaining = 04:54:38.0993725, Incomplete = False, SoftCount = 566, LayerPrintDone = 325, WeightsDone = 325, WeightDone = 02:28:06.1158835, WeightTotal = 03:41:13.6812356, WeightTotalEstimate = 03:41:13.6812357, LayerRecoatElapsed = 02:13:53.2147661, LayerRecoatDelays = 00:22:30, LayerRecoatPrintLayersElapsed = 01:30:52.2204732, LayerRecoatNoDelayAverage = 00:00:14.8515884, StreamingElapsed = 02:23:45.0188246, ObjectLayerOverheadAverageDuration = 00:00:00.0222717, TimeLayers = 07:06:56.6148312, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:25.8151909, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.7064920, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7738260, JobElapsed = 03:54:44.4708955, JobTotal = 06:23:48.1345132, WeightEstimate = 01:13:07.5653522 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:37. coolingEstimate=02:29:25.8151909 [PrintingService.cs@1912] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.57660412153426;StartedAtUtc;06:56:38.5064383;11:51:16.6058108;04:54:38.0993725;False;566;325;325;02:28:06.1158835;03:41:13.6812356;03:41:13.6812357;02:13:53.2147661;00:22:30;01:30:52.2204732;00:00:14.8515884;02:23:45.0188246;00:00:00.0222717;07:06:56.6148312;00:00:00;02:29:25.8151909;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.7064920;00:00:00;00:04:27.7738260;03:54:44.4708955;06:23:48.1345132 [PrintingService.cs@1918] +06/28/2026 03:30:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 324. PreviewWeight=LayerWeight { Index = 324, FillTotalRelative = 0.0885118321656822, FillMaxRelative = 0.28205830609099175, TimeFromPreview = 17.603779847157025, EnergyDensityIncreaseFactor = 0 }, FillArea=8417.98170382507, PreviewFillRatio=0.28205830609099175, Results=3, StreamingSeconds (preview) = 17.603779847157025, StreamingSeconds (extrapolated) = 17.74170388909742, StreamingSeconds (no overhead) = 1.0191265 (02:23:45.0188246), LayerElapsedSeconds=20.7513989, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 325, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.57660983760501, Elapsed = 06:56:38.4999708, TimeTotal = 11:51:16.5906052, Remaining = 04:54:38.0906344, Incomplete = False, SoftCount = 566, LayerPrintDone = 325, WeightsDone = 325, WeightDone = 02:28:06.1094160, WeightTotal = 03:41:13.6699722, WeightTotalEstimate = 03:41:13.6699723, LayerRecoatElapsed = 02:13:53.2147661, LayerRecoatDelays = 00:22:30, LayerRecoatPrintLayersElapsed = 01:30:52.2204732, LayerRecoatNoDelayAverage = 00:00:14.8515884, StreamingElapsed = 02:23:45.0188246, ObjectLayerOverheadAverageDuration = 00:00:00.0222518, TimeLayers = 07:06:56.6035678, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:25.8112487, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.7064920, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7738260, JobElapsed = 03:54:44.4730311, JobTotal = 06:23:48.1232498, WeightEstimate = 01:13:07.5605563 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:37. coolingEstimate=02:29:25.8112487 [PrintingService.cs@1912] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.57660983760501;StartedAtUtc;06:56:38.4999708;11:51:16.5906052;04:54:38.0906344;False;566;325;325;02:28:06.1094160;03:41:13.6699722;03:41:13.6699723;02:13:53.2147661;00:22:30;01:30:52.2204732;00:00:14.8515884;02:23:45.0188246;00:00:00.0222518;07:06:56.6035678;00:00:00;02:29:25.8112487;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.7064920;00:00:00;00:04:27.7738260;03:54:44.4730311;06:23:48.1232498 [PrintingService.cs@1918] +06/28/2026 03:30:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 325. PrevPreviewWeight=LayerWeight { Index = 324, FillTotalRelative = 0.0885118321656822, FillMaxRelative = 0.28205830609099175, TimeFromPreview = 17.603779847157025, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.28205830609099175, PreviewWeight=LayerWeight { Index = 325, FillTotalRelative = 0.08840624454086742, FillMaxRelative = 0.28071987071126586, TimeFromPreview = 18.490874400131595, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.9417775. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531604, LCompressed = 1419282 } [McuMovementClient.cs@491] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632515. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.0060740. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531604, LCompressed = 1419282 } [McuMovementClient.cs@491] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.0189957. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531604, LCompressed = 1419282 } [McuMovementClient.cs@491] +06/28/2026 03:30:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3879.1903329338325, PrevLayerFillRatio=0.28205830609099175: Z1=99.2780450666385, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36499.30082576308, Z2 = 37050 } } [LayerClient.cs@969] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5969001071632 (5969001071632 @ 0) for mcu = 49727.878578 [27/06/2026 00:55:43] (49741.67559693333 sec) to 5970270616420 (from now=5970150616420, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5969001071632 (5969001071632 @ 0) for mcu = 49727.878578 [27/06/2026 00:55:43] (49741.67559693333 sec) to 5970270616420 (from external timestamp, flags=None, requested=5970270616420 (5970270616420 @ 0) for mcu = 49738.458363 [27/06/2026 00:55:54] (49752.25513683333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5969001071632 (5969001071632 @ 0) for mcu = 49727.878578 [27/06/2026 00:55:43] (49741.67559693333 sec) to 5970270616420 (from external timestamp, flags=None, requested=5970270616420 (5970270616420 @ 0) for mcu = 49738.458363 [27/06/2026 00:55:54] (49752.25513683333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:30:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11.0773196. Loops = 45. [McuMovementClient.cs@475] +06/28/2026 03:31:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (52 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:31:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:11.0773196. Loops = 45. GC duration = 00:00:02.2669731. SinceCollect=00:01:05.4603342. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531604, LCompressed = 1419282 } [McuMovementClient.cs@478] +06/28/2026 03:31:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=125057, gen1=31359, gen2=908, LatencyMode=Interactive, FreeMemory=5798297600, Live=353591048, HeapSizeBytes=351549504, FragmentedBytes=775968, TotalCommittedBytes=354189312, PinnedObjectsCount=1, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:31:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:31:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:31:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134 [HeaterCheck.cs@111] +06/28/2026 03:31:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:31:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 325, Weight=LayerWeight { Index = 325, FillTotalRelative = 0.08840624454086742, FillMaxRelative = 0.28071987071126586, TimeFromPreview = 18.490874400131595, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:31:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:31:18 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5972463548400, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:31:18 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5972583551106, flushed existing data. Was Timestamp=0, Now=5972463553791, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:31:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5970136881518 (5970136881518 @ 0) for mcu = 49737.343839 [27/06/2026 00:55:53] (49751.14067931667 sec) to 5972583727598 (from now=5972463727598, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5970136833518 (1528355029380660 @ 8) for mcu = 49737.343439 [27/06/2026 00:55:53] (49751.14027931836 sec) to 5972583727598 (from now=5972463727598, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5970136833518 (1528355029380660 @ 8) for mcu = 49737.343439 [27/06/2026 00:55:53] (49751.14027931836 sec) to 5972583727598 (from now=5972463727598, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.8442695. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531605, LCompressed = 1419284 } [McuMovementClient.cs@491] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:31:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 325 [PrintingService.cs@2118] +06/28/2026 03:31:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.8590583. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531605, LCompressed = 1419284 } [McuMovementClient.cs@491] +06/28/2026 03:31:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 326, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.65401118599558, Elapsed = 06:56:58.8965378, TimeTotal = 11:50:55.0478508, Remaining = 04:53:56.1513130, Incomplete = False, SoftCount = 566, LayerPrintDone = 326, WeightsDone = 326, WeightDone = 02:28:07.1616252, WeightTotal = 03:40:54.9452954, WeightTotalEstimate = 03:40:54.9452955, LayerRecoatElapsed = 02:14:12.5591239, LayerRecoatDelays = 00:22:33, LayerRecoatPrintLayersElapsed = 01:31:11.5648310, LayerRecoatNoDelayAverage = 00:00:14.8548983, StreamingElapsed = 02:23:46.0487820, ObjectLayerOverheadAverageDuration = 00:00:00.0222518, TimeLayers = 07:06:40.6459719, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:20.2260902, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.1367790, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8234745, JobElapsed = 03:55:04.8641292, JobTotal = 06:23:31.6857184, WeightEstimate = 01:12:47.7836703 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:15. coolingEstimate=02:29:20.2260902 [PrintingService.cs@1912] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.65401118599558;StartedAtUtc;06:56:58.8965378;11:50:55.0478508;04:53:56.1513130;False;566;326;326;02:28:07.1616252;03:40:54.9452954;03:40:54.9452955;02:14:12.5591239;00:22:33;01:31:11.5648310;00:00:14.8548983;02:23:46.0487820;00:00:00.0222518;07:06:40.6459719;00:00:00;02:29:20.2260902;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.1367790;00:00:00;00:04:27.8234745;03:55:04.8641292;06:23:31.6857184 [PrintingService.cs@1918] +06/28/2026 03:31:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 325. PreviewWeight=LayerWeight { Index = 325, FillTotalRelative = 0.08840624454086742, FillMaxRelative = 0.28071987071126586, TimeFromPreview = 18.490874400131595, EnergyDensityIncreaseFactor = 0 }, FillArea=8462.756440010298, PreviewFillRatio=0.28071987071126586, Results=3, StreamingSeconds (preview) = 18.490874400131595, StreamingSeconds (extrapolated) = 18.754634207082333, StreamingSeconds (no overhead) = 1.0299574 (02:23:46.0487820), LayerElapsedSeconds=20.3910344, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 326, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.65401422226747, Elapsed = 06:56:58.8930823, TimeTotal = 11:50:55.0397514, Remaining = 04:53:56.1466691, Incomplete = False, SoftCount = 566, LayerPrintDone = 326, WeightsDone = 326, WeightDone = 02:28:07.1581697, WeightTotal = 03:40:54.9392959, WeightTotalEstimate = 03:40:54.9392959, LayerRecoatElapsed = 02:14:12.5591239, LayerRecoatDelays = 00:22:33, LayerRecoatPrintLayersElapsed = 01:31:11.5648310, LayerRecoatNoDelayAverage = 00:00:14.8548983, StreamingElapsed = 02:23:46.0487820, ObjectLayerOverheadAverageDuration = 00:00:00.0222412, TimeLayers = 07:06:40.6399724, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:20.2239903, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.1367790, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8234745, JobElapsed = 03:55:04.8650605, JobTotal = 06:23:31.6797189, WeightEstimate = 01:12:47.7811262 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:15. coolingEstimate=02:29:20.2239903 [PrintingService.cs@1912] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.65401422226747;StartedAtUtc;06:56:58.8930823;11:50:55.0397514;04:53:56.1466691;False;566;326;326;02:28:07.1581697;03:40:54.9392959;03:40:54.9392959;02:14:12.5591239;00:22:33;01:31:11.5648310;00:00:14.8548983;02:23:46.0487820;00:00:00.0222412;07:06:40.6399724;00:00:00;02:29:20.2239903;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.1367790;00:00:00;00:04:27.8234745;03:55:04.8650605;06:23:31.6797189 [PrintingService.cs@1918] +06/28/2026 03:31:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 326. PrevPreviewWeight=LayerWeight { Index = 325, FillTotalRelative = 0.08840624454086742, FillMaxRelative = 0.28071987071126586, TimeFromPreview = 18.490874400131595, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.28071987071126586, PreviewWeight=LayerWeight { Index = 326, FillTotalRelative = 0.08874015755984817, FillMaxRelative = 0.28325018613861885, TimeFromPreview = 17.640069439626124, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.8732449. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531605, LCompressed = 1419284 } [McuMovementClient.cs@491] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632129. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.9380782. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531605, LCompressed = 1419284 } [McuMovementClient.cs@491] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.9486318. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531605, LCompressed = 1419284 } [McuMovementClient.cs@491] +06/28/2026 03:31:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3877.0208059672213, PrevLayerFillRatio=0.28071987071126586: Z1=99.22252152242467, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36598.5233472855, Z2 = 37150 } } [LayerClient.cs@969] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5971490071313 (5971490071313 @ 0) for mcu = 49748.620673 [27/06/2026 00:56:04] (49762.417260941664 sec) to 5972717442479 (from now=5972597442479, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5971490071313 (5971490071313 @ 0) for mcu = 49748.620673 [27/06/2026 00:56:04] (49762.417260941664 sec) to 5972717442479 (from external timestamp, flags=None, requested=5972717442479 (5972717442479 @ 0) for mcu = 49758.848995 [27/06/2026 00:56:14] (49772.64535399167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5971490071313 (5971490071313 @ 0) for mcu = 49748.620673 [27/06/2026 00:56:04] (49762.417260941664 sec) to 5972717442479 (from external timestamp, flags=None, requested=5972717442479 (5972717442479 @ 0) for mcu = 49758.848995 [27/06/2026 00:56:14] (49772.64535399167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:31:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0011125 ~ 5.95 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:31:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0713628. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:18.1229957. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531605, LCompressed = 1419284 } [McuMovementClient.cs@491] +06/28/2026 03:31:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:31:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:31:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:31:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 326, Weight=LayerWeight { Index = 326, FillTotalRelative = 0.08874015755984817, FillMaxRelative = 0.28325018613861885, TimeFromPreview = 17.640069439626124, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:31:38 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:31:38 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5974869895669, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:31:38 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5974989911449, flushed existing data. Was Timestamp=0, Now=5974869914082, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:31:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:31:38 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:31:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5972583775598 (5972583775598 @ 0) for mcu = 49757.735055 [27/06/2026 00:56:13] (49771.53146331666 sec) to 5974989963168 (from now=5974869963168, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5972583727598 (1528981434265161 @ 8) for mcu = 49757.734655 [27/06/2026 00:56:13] (49771.531063319046 sec) to 5974989963168 (from now=5974869963168, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5972583727598 (1528981434265161 @ 8) for mcu = 49757.734655 [27/06/2026 00:56:13] (49771.531063319046 sec) to 5974989963168 (from now=5974869963168, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:26.8979594. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531606, LCompressed = 1419286 } [McuMovementClient.cs@491] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:31:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 326 [PrintingService.cs@2118] +06/28/2026 03:31:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:26.9099775. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531606, LCompressed = 1419286 } [McuMovementClient.cs@491] +06/28/2026 03:31:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 327, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.71593578855114, Elapsed = 06:57:18.9513973, TimeTotal = 11:50:44.2175553, Remaining = 04:53:25.2661580, Incomplete = False, SoftCount = 566, LayerPrintDone = 327, WeightsDone = 327, WeightDone = 02:28:08.2050115, WeightTotal = 03:40:44.7837003, WeightTotalEstimate = 03:40:44.7837003, LayerRecoatElapsed = 02:14:31.5705971, LayerRecoatDelays = 00:22:36, LayerRecoatPrintLayersElapsed = 01:31:30.5763041, LayerRecoatNoDelayAverage = 00:00:14.8574571, StreamingElapsed = 02:23:47.0733826, ObjectLayerOverheadAverageDuration = 00:00:00.0222412, TimeLayers = 07:06:32.6235308, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:17.4182358, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.4694230, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8618565, JobElapsed = 03:55:24.9148509, JobTotal = 06:23:23.2922513, WeightEstimate = 01:12:36.5786888 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:05. coolingEstimate=02:29:17.4182358 [PrintingService.cs@1912] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.71593578855114;StartedAtUtc;06:57:18.9513973;11:50:44.2175553;04:53:25.2661580;False;566;327;327;02:28:08.2050115;03:40:44.7837003;03:40:44.7837003;02:14:31.5705971;00:22:36;01:31:30.5763041;00:00:14.8574571;02:23:47.0733826;00:00:00.0222412;07:06:32.6235308;00:00:00;02:29:17.4182358;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.4694230;00:00:00;00:04:27.8618565;03:55:24.9148509;06:23:23.2922513 [PrintingService.cs@1918] +06/28/2026 03:31:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 326. PreviewWeight=LayerWeight { Index = 326, FillTotalRelative = 0.08874015755984817, FillMaxRelative = 0.28325018613861885, TimeFromPreview = 17.640069439626124, EnergyDensityIncreaseFactor = 0 }, FillArea=8450.615916964198, PreviewFillRatio=0.28325018613861885, Results=3, StreamingSeconds (preview) = 17.640069439626124, StreamingSeconds (extrapolated) = 10.18019621597114, StreamingSeconds (no overhead) = 1.0246006 (02:23:47.0733826), LayerElapsedSeconds=20.0498098, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 327, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.71594237813116, Elapsed = 06:57:18.9438436, TimeTotal = 11:50:44.1999046, Remaining = 04:53:25.2560610, Incomplete = False, SoftCount = 566, LayerPrintDone = 327, WeightsDone = 327, WeightDone = 02:28:08.1974578, WeightTotal = 03:40:44.7706257, WeightTotalEstimate = 03:40:44.7706257, LayerRecoatElapsed = 02:14:31.5705971, LayerRecoatDelays = 00:22:36, LayerRecoatPrintLayersElapsed = 01:31:30.5763041, LayerRecoatNoDelayAverage = 00:00:14.8574571, StreamingElapsed = 02:23:47.0733826, ObjectLayerOverheadAverageDuration = 00:00:00.0222181, TimeLayers = 07:06:32.6104562, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:17.4136597, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.4694230, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8618565, JobElapsed = 03:55:24.9167664, JobTotal = 06:23:23.2791767, WeightEstimate = 01:12:36.5731679 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:25:05. coolingEstimate=02:29:17.4136597 [PrintingService.cs@1912] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.71594237813116;StartedAtUtc;06:57:18.9438436;11:50:44.1999046;04:53:25.2560610;False;566;327;327;02:28:08.1974578;03:40:44.7706257;03:40:44.7706257;02:14:31.5705971;00:22:36;01:31:30.5763041;00:00:14.8574571;02:23:47.0733826;00:00:00.0222181;07:06:32.6104562;00:00:00;02:29:17.4136597;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.4694230;00:00:00;00:04:27.8618565;03:55:24.9167664;06:23:23.2791767 [PrintingService.cs@1918] +06/28/2026 03:31:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 327. PrevPreviewWeight=LayerWeight { Index = 326, FillTotalRelative = 0.08874015755984817, FillMaxRelative = 0.28325018613861885, TimeFromPreview = 17.640069439626124, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.28325018613861885, PreviewWeight=LayerWeight { Index = 327, FillTotalRelative = 0.08858327802479843, FillMaxRelative = 0.2818571788804839, TimeFromPreview = 18.58538656650701, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:26.9272126. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531606, LCompressed = 1419286 } [McuMovementClient.cs@491] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632505. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:26.9884863. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531606, LCompressed = 1419286 } [McuMovementClient.cs@491] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.0016042. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531606, LCompressed = 1419286 } [McuMovementClient.cs@491] +06/28/2026 03:31:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3881.12230211476, PrevLayerFillRatio=0.28325018613861885: Z1=99.3274889213994, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36697.850836206904, Z2 = 37250 } } [LayerClient.cs@969] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5973936858686 (5973936858686 @ 0) for mcu = 49769.010990 [27/06/2026 00:56:24] (49782.80715571667 sec) to 5975123728894 (from now=5975003728894, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5973936858686 (5973936858686 @ 0) for mcu = 49769.010990 [27/06/2026 00:56:24] (49782.80715571667 sec) to 5975123728894 (from external timestamp, flags=None, requested=5975123728894 (5975123728894 @ 0) for mcu = 49778.901791 [27/06/2026 00:56:34] (49792.69774078333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5973936858686 (5973936858686 @ 0) for mcu = 49769.010990 [27/06/2026 00:56:24] (49782.80715571667 sec) to 5975123728894 (from external timestamp, flags=None, requested=5975123728894 (5975123728894 @ 0) for mcu = 49778.901791 [27/06/2026 00:56:34] (49792.69774078333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0792315. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.1740913. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531606, LCompressed = 1419286 } [McuMovementClient.cs@491] +06/28/2026 03:31:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:31:54 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:31:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:31:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 327, Weight=LayerWeight { Index = 327, FillTotalRelative = 0.08858327802479843, FillMaxRelative = 0.2818571788804839, TimeFromPreview = 18.58538656650701, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:31:57 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:31:57 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5977165737047, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:31:57 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5977285742116, flushed existing data. Was Timestamp=0, Now=5977165744776, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:31:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:31:57 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:31:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5974990011168 (5974990011168 @ 0) for mcu = 49777.787467 [27/06/2026 00:56:33] (49791.5834264 sec) to 5977285757991 (from now=5977165757991, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5974989963168 (1529597430571112 @ 8) for mcu = 49777.787067 [27/06/2026 00:56:33] (49791.58302640339 sec) to 5977285757991 (from now=5977165757991, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5974989963168 (1529597430571112 @ 8) for mcu = 49777.787067 [27/06/2026 00:56:33] (49791.58302640339 sec) to 5977285757991 (from now=5977165757991, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.0254015. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531607, LCompressed = 1419288 } [McuMovementClient.cs@491] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:31:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 327 [PrintingService.cs@2118] +06/28/2026 03:31:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.0382144. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531607, LCompressed = 1419288 } [McuMovementClient.cs@491] +06/28/2026 03:31:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 328, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.79507657482815, Elapsed = 06:57:38.0779972, TimeTotal = 11:50:19.3474981, Remaining = 04:52:41.2695009, Incomplete = False, SoftCount = 566, LayerPrintDone = 328, WeightsDone = 328, WeightDone = 02:28:09.2378351, WeightTotal = 03:40:25.9253436, WeightTotalEstimate = 03:40:25.9253436, LayerRecoatElapsed = 02:14:49.6643734, LayerRecoatDelays = 00:22:39, LayerRecoatPrintLayersElapsed = 01:31:48.6700805, LayerRecoatNoDelayAverage = 00:00:14.8579787, StreamingElapsed = 02:23:48.0915418, ObjectLayerOverheadAverageDuration = 00:00:00.0222181, TimeLayers = 07:06:14.2012662, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:10.9704432, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.5372310, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8696805, JobElapsed = 03:55:44.0431195, JobTotal = 06:23:04.7943547, WeightEstimate = 01:12:16.6875085 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:24:40. coolingEstimate=02:29:10.9704432 [PrintingService.cs@1912] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.79507657482815;StartedAtUtc;06:57:38.0779972;11:50:19.3474981;04:52:41.2695009;False;566;328;328;02:28:09.2378351;03:40:25.9253436;03:40:25.9253436;02:14:49.6643734;00:22:39;01:31:48.6700805;00:00:14.8579787;02:23:48.0915418;00:00:00.0222181;07:06:14.2012662;00:00:00;02:29:10.9704432;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.5372310;00:00:00;00:04:27.8696805;03:55:44.0431195;06:23:04.7943547 [PrintingService.cs@1918] +06/28/2026 03:31:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 327. PreviewWeight=LayerWeight { Index = 327, FillTotalRelative = 0.08858327802479843, FillMaxRelative = 0.2818571788804839, TimeFromPreview = 18.58538656650701, EnergyDensityIncreaseFactor = 0 }, FillArea=8460.231840757107, PreviewFillRatio=0.2818571788804839, Results=3, StreamingSeconds (preview) = 18.58538656650701, StreamingSeconds (extrapolated) = 18.863441319720653, StreamingSeconds (no overhead) = 1.0181592 (02:23:48.0915418), LayerElapsedSeconds=19.1262514, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 328, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.795081667482584, Elapsed = 06:57:38.0721259, TimeTotal = 11:50:19.3338205, Remaining = 04:52:41.2616946, Incomplete = False, SoftCount = 566, LayerPrintDone = 328, WeightsDone = 328, WeightDone = 02:28:09.2319638, WeightTotal = 03:40:25.9152121, WeightTotalEstimate = 03:40:25.9152122, LayerRecoatElapsed = 02:14:49.6643734, LayerRecoatDelays = 00:22:39, LayerRecoatPrintLayersElapsed = 01:31:48.6700805, LayerRecoatNoDelayAverage = 00:00:14.8579787, StreamingElapsed = 02:23:48.0915418, ObjectLayerOverheadAverageDuration = 00:00:00.0222002, TimeLayers = 07:06:14.1911347, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:10.9668971, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.5372310, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8696805, JobElapsed = 03:55:44.0450575, JobTotal = 06:23:04.7842232, WeightEstimate = 01:12:16.6832484 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:24:40. coolingEstimate=02:29:10.9668971 [PrintingService.cs@1912] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.795081667482584;StartedAtUtc;06:57:38.0721259;11:50:19.3338205;04:52:41.2616946;False;566;328;328;02:28:09.2319638;03:40:25.9152121;03:40:25.9152122;02:14:49.6643734;00:22:39;01:31:48.6700805;00:00:14.8579787;02:23:48.0915418;00:00:00.0222002;07:06:14.1911347;00:00:00;02:29:10.9668971;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.5372310;00:00:00;00:04:27.8696805;03:55:44.0450575;06:23:04.7842232 [PrintingService.cs@1918] +06/28/2026 03:31:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 328. PrevPreviewWeight=LayerWeight { Index = 327, FillTotalRelative = 0.08858327802479843, FillMaxRelative = 0.2818571788804839, TimeFromPreview = 18.58538656650701, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.2818571788804839, PreviewWeight=LayerWeight { Index = 328, FillTotalRelative = 0.08890679558866454, FillMaxRelative = 0.28432616340934896, TimeFromPreview = 17.725620363345303, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.0536904. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531607, LCompressed = 1419288 } [McuMovementClient.cs@491] +06/28/2026 03:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634486. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.1170605. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531607, LCompressed = 1419288 } [McuMovementClient.cs@491] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.1303921. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531607, LCompressed = 1419288 } [McuMovementClient.cs@491] +06/28/2026 03:31:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3878.8643172639504, PrevLayerFillRatio=0.2818571788804839: Z1=99.2697015218291, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36797.12053772873, Z2 = 37350 } } [LayerClient.cs@969] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5976343181735 (5976343181735 @ 0) for mcu = 49789.064132 [27/06/2026 00:56:45] (49802.85984779167 sec) to 5977419120060 (from now=5977299120060, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5976343181735 (5976343181735 @ 0) for mcu = 49789.064132 [27/06/2026 00:56:45] (49802.85984779167 sec) to 5977419120060 (from external timestamp, flags=None, requested=5977419120060 (5977419120060 @ 0) for mcu = 49798.030482 [27/06/2026 00:56:53] (49811.8260005 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5976343181735 (5976343181735 @ 0) for mcu = 49789.064132 [27/06/2026 00:56:45] (49802.85984779167 sec) to 5977419120060 (from external timestamp, flags=None, requested=5977419120060 (5977419120060 @ 0) for mcu = 49798.030482 [27/06/2026 00:56:53] (49811.8260005 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:31:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0722319. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:57.3034558. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531607, LCompressed = 1419288 } [McuMovementClient.cs@491] +06/28/2026 03:32:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:32:14 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:32:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 03:32:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 03:32:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (3 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:32:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:32:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 328, Weight=LayerWeight { Index = 328, FillTotalRelative = 0.08890679558866454, FillMaxRelative = 0.28432616340934896, TimeFromPreview = 17.725620363345303, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:32:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5979541575682, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:32:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5979661579287, flushed existing data. Was Timestamp=0, Now=5979541581931, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5977285805991 (5977285805991 @ 0) for mcu = 49796.919505 [27/06/2026 00:56:52] (49810.715049925 sec) to 5979661611819 (from now=5979541611819, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5977285757991 (1530185154045893 @ 8) for mcu = 49796.919105 [27/06/2026 00:56:52] (49810.71464993141 sec) to 5979661611819 (from now=5979541611819, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5977285757991 (1530185154045893 @ 8) for mcu = 49796.919105 [27/06/2026 00:56:52] (49810.71464993141 sec) to 5979661611819 (from now=5979541611819, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 03:32:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 03:32:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:32:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:32:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:01. Loops = 4. [McuMovementClient.cs@475] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:01. Loops = 4. GC duration = 00:00:00.3848082. SinceCollect=00:01:06.2194391. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531608, LCompressed = 1419290 } [McuMovementClient.cs@478] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=125239, gen1=31530, gen2=909, LatencyMode=Interactive, FreeMemory=5746720768, Live=352254016, HeapSizeBytes=353177392, FragmentedBytes=1746400, TotalCommittedBytes=362004480, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:32:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 328 [PrintingService.cs@2118] +06/28/2026 03:32:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0139120. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531608, LCompressed = 1419290 } [McuMovementClient.cs@491] +06/28/2026 03:32:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 329, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.87179150481071, Elapsed = 06:57:58.2718583, TimeTotal = 11:49:58.1123001, Remaining = 04:51:59.8404418, Incomplete = False, SoftCount = 566, LayerPrintDone = 329, WeightsDone = 329, WeightDone = 02:28:10.6637696, WeightTotal = 03:40:08.5199773, WeightTotalEstimate = 03:40:08.5199774, LayerRecoatElapsed = 02:15:08.4323000, LayerRecoatDelays = 00:22:42, LayerRecoatPrintLayersElapsed = 01:32:07.4380066, LayerRecoatNoDelayAverage = 00:00:14.8599830, StreamingElapsed = 02:23:49.5011474, ObjectLayerOverheadAverageDuration = 00:00:00.0222002, TimeLayers = 07:05:58.4714899, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:05.4650215, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.7977900, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8997450, JobElapsed = 03:56:04.2391203, JobTotal = 06:22:48.7739549, WeightEstimate = 01:11:57.8562078 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:24:18. coolingEstimate=02:29:05.4650215 [PrintingService.cs@1912] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.87179150481071;StartedAtUtc;06:57:58.2718583;11:49:58.1123001;04:51:59.8404418;False;566;329;329;02:28:10.6637696;03:40:08.5199773;03:40:08.5199774;02:15:08.4323000;00:22:42;01:32:07.4380066;00:00:14.8599830;02:23:49.5011474;00:00:00.0222002;07:05:58.4714899;00:00:00;02:29:05.4650215;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.7977900;00:00:00;00:04:27.8997450;03:56:04.2391203;06:22:48.7739549 [PrintingService.cs@1918] +06/28/2026 03:32:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 328. PreviewWeight=LayerWeight { Index = 328, FillTotalRelative = 0.08890679558866454, FillMaxRelative = 0.28432616340934896, TimeFromPreview = 17.725620363345303, EnergyDensityIncreaseFactor = 0 }, FillArea=8462.257004116356, PreviewFillRatio=0.28432616340934896, Results=3, StreamingSeconds (preview) = 17.725620363345303, StreamingSeconds (extrapolated) = 17.80484038847065, StreamingSeconds (no overhead) = 1.4096056 (02:23:49.5011474), LayerElapsedSeconds=20.1942111, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 329, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.87179462531129, Elapsed = 06:57:58.2682394, TimeTotal = 11:49:58.1038951, Remaining = 04:51:59.8356557, Incomplete = False, SoftCount = 566, LayerPrintDone = 329, WeightsDone = 329, WeightDone = 02:28:10.6601507, WeightTotal = 03:40:08.5137514, WeightTotalEstimate = 03:40:08.5137514, LayerRecoatElapsed = 02:15:08.4323000, LayerRecoatDelays = 00:22:42, LayerRecoatPrintLayersElapsed = 01:32:07.4380066, LayerRecoatNoDelayAverage = 00:00:14.8599830, StreamingElapsed = 02:23:49.5011474, ObjectLayerOverheadAverageDuration = 00:00:00.0221892, TimeLayers = 07:05:58.4652640, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:05.4628424, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.7977900, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8997450, JobElapsed = 03:56:04.2420570, JobTotal = 06:22:48.7677290, WeightEstimate = 01:11:57.8536007 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:24:18. coolingEstimate=02:29:05.4628424 [PrintingService.cs@1912] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.87179462531129;StartedAtUtc;06:57:58.2682394;11:49:58.1038951;04:51:59.8356557;False;566;329;329;02:28:10.6601507;03:40:08.5137514;03:40:08.5137514;02:15:08.4323000;00:22:42;01:32:07.4380066;00:00:14.8599830;02:23:49.5011474;00:00:00.0221892;07:05:58.4652640;00:00:00;02:29:05.4628424;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.7977900;00:00:00;00:04:27.8997450;03:56:04.2420570;06:22:48.7677290 [PrintingService.cs@1918] +06/28/2026 03:32:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 329. PrevPreviewWeight=LayerWeight { Index = 328, FillTotalRelative = 0.08890679558866454, FillMaxRelative = 0.28432616340934896, TimeFromPreview = 17.725620363345303, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.28432616340934896, PreviewWeight=LayerWeight { Index = 329, FillTotalRelative = 0.08867462206527779, FillMaxRelative = 0.282769065812041, TimeFromPreview = 18.754659212095124, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0312091. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531608, LCompressed = 1419290 } [McuMovementClient.cs@491] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632614. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0931256. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531608, LCompressed = 1419290 } [McuMovementClient.cs@491] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1057544. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531608, LCompressed = 1419290 } [McuMovementClient.cs@491] +06/28/2026 03:32:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3882.8663995434963, PrevLayerFillRatio=0.28432616340934896: Z1=99.37212467480924, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36896.49266240354, Z2 = 37450 } } [LayerClient.cs@969] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5978638575113 (5978638575113 @ 0) for mcu = 49808.192836 [27/06/2026 00:57:04] (49821.988125941665 sec) to 5979842464882 (from now=5979722464882, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5978638575113 (5978638575113 @ 0) for mcu = 49808.192836 [27/06/2026 00:57:04] (49821.988125941665 sec) to 5979842464882 (from external timestamp, flags=None, requested=5979842464882 (5979842464882 @ 0) for mcu = 49818.225473 [27/06/2026 00:57:14] (49832.020540683334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5978638575113 (5978638575113 @ 0) for mcu = 49808.192836 [27/06/2026 00:57:04] (49821.988125941665 sec) to 5979842464882 (from external timestamp, flags=None, requested=5979842464882 (5979842464882 @ 0) for mcu = 49818.225473 [27/06/2026 00:57:14] (49832.020540683334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:32:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1574621 ~ 6 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:32:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0612601. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2809142. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531608, LCompressed = 1419290 } [McuMovementClient.cs@491] +06/28/2026 03:32:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:32:38 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:32:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:32:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 329, Weight=LayerWeight { Index = 329, FillTotalRelative = 0.08867462206527779, FillMaxRelative = 0.282769065812041, TimeFromPreview = 18.754659212095124, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:32:41 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5982381442947, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:32:41 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5982501450836, flushed existing data. Was Timestamp=0, Now=5982381453420, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:32:41 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:32:41 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:32:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5979661659819 (5979661659819 @ 0) for mcu = 49816.718693 [27/06/2026 00:57:12] (49830.513831825 sec) to 5982501549155 (from now=5982381549155, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5979661611819 (1530793372625885 @ 8) for mcu = 49816.718293 [27/06/2026 00:57:12] (49830.513431832194 sec) to 5982501549155 (from now=5982381549155, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5979661611819 (1530793372625885 @ 8) for mcu = 49816.718293 [27/06/2026 00:57:12] (49830.513431832194 sec) to 5982501549155 (from now=5982381549155, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01. Loops = 4. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.2739318. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531609, LCompressed = 1419292 } [McuMovementClient.cs@491] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:32:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 329 [PrintingService.cs@2118] +06/28/2026 03:32:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.2851552. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531609, LCompressed = 1419292 } [McuMovementClient.cs@491] +06/28/2026 03:32:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 330, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.946512713150014, Elapsed = 06:58:21.5442220, TimeTotal = 11:49:43.5949688, Remaining = 04:51:22.0507468, Incomplete = False, SoftCount = 566, LayerPrintDone = 330, WeightsDone = 330, WeightDone = 02:28:11.7022858, WeightTotal = 03:39:49.7300193, WeightTotalEstimate = 03:39:49.7300193, LayerRecoatElapsed = 02:15:30.6661475, LayerRecoatDelays = 00:22:45, LayerRecoatPrintLayersElapsed = 01:32:29.6718540, LayerRecoatNoDelayAverage = 00:00:14.8695959, StreamingElapsed = 02:23:50.5210933, ObjectLayerOverheadAverageDuration = 00:00:00.0221892, TimeLayers = 07:05:47.7179112, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:01.7012689, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.0474670, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.0439385, JobElapsed = 03:56:27.5127607, JobTotal = 06:22:36.6265057, WeightEstimate = 01:11:38.0277335 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:24:04. coolingEstimate=02:29:01.7012689 [PrintingService.cs@1912] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.946512713150014;StartedAtUtc;06:58:21.5442220;11:49:43.5949688;04:51:22.0507468;False;566;330;330;02:28:11.7022858;03:39:49.7300193;03:39:49.7300193;02:15:30.6661475;00:22:45;01:32:29.6718540;00:00:14.8695959;02:23:50.5210933;00:00:00.0221892;07:05:47.7179112;00:00:00;02:29:01.7012689;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.0474670;00:00:00;00:04:28.0439385;03:56:27.5127607;06:22:36.6265057 [PrintingService.cs@1918] +06/28/2026 03:32:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 329. PreviewWeight=LayerWeight { Index = 329, FillTotalRelative = 0.08867462206527779, FillMaxRelative = 0.282769065812041, TimeFromPreview = 18.754659212095124, EnergyDensityIncreaseFactor = 0 }, FillArea=8493.672530169035, PreviewFillRatio=0.282769065812041, Results=3, StreamingSeconds (preview) = 18.754659212095124, StreamingSeconds (extrapolated) = 18.803677990896357, StreamingSeconds (no overhead) = 1.0199459 (02:23:50.5210933), LayerElapsedSeconds=23.2705367, LayerStreamStats=StreamStats { EdgeCount = 0, OnTraceLength = 0, AllTraceLength = 0 }, TotalStreamStats=StreamStats { EdgeCount = 32208187, OnTraceLength = 6181898.083089169, AllTraceLength = 14257757.253186466 } [PrintingService.cs@2147] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 330, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 58.94651469248555, Elapsed = 06:58:21.5419120, TimeTotal = 11:49:43.5896201, Remaining = 04:51:22.0477081, Incomplete = False, SoftCount = 566, LayerPrintDone = 330, WeightsDone = 330, WeightDone = 02:28:11.6999758, WeightTotal = 03:39:49.7260573, WeightTotalEstimate = 03:39:49.7260573, LayerRecoatElapsed = 02:15:30.6661475, LayerRecoatDelays = 00:22:45, LayerRecoatPrintLayersElapsed = 01:32:29.6718540, LayerRecoatNoDelayAverage = 00:00:14.8695959, StreamingElapsed = 02:23:50.5210933, ObjectLayerOverheadAverageDuration = 00:00:00.0221822, TimeLayers = 07:05:47.7139492, CoolingElapsed = 00:00:00, CoolingEstimate = 02:29:01.6998822, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.0474670, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.0439385, JobElapsed = 03:56:27.5146010, JobTotal = 06:22:36.6225437, WeightEstimate = 01:11:38.0260815 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:24:04. coolingEstimate=02:29:01.6998822 [PrintingService.cs@1912] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 58.94651469248555;StartedAtUtc;06:58:21.5419120;11:49:43.5896201;04:51:22.0477081;False;566;330;330;02:28:11.6999758;03:39:49.7260573;03:39:49.7260573;02:15:30.6661475;00:22:45;01:32:29.6718540;00:00:14.8695959;02:23:50.5210933;00:00:00.0221822;07:05:47.7139492;00:00:00;02:29:01.6998822;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.0474670;00:00:00;00:04:28.0439385;03:56:27.5146010;06:22:36.6225437 [PrintingService.cs@1918] +06/28/2026 03:32:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 330. PrevPreviewWeight=LayerWeight { Index = 329, FillTotalRelative = 0.08867462206527779, FillMaxRelative = 0.282769065812041, TimeFromPreview = 18.754659212095124, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.282769065812041, PreviewWeight=LayerWeight { Index = 330, FillTotalRelative = 0.1829003336791441, FillMaxRelative = 0.42405435869538105, TimeFromPreview = 37.463973865515484, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.3025446. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531609, LCompressed = 1419292 } [McuMovementClient.cs@491] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632935. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.3660380. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531609, LCompressed = 1419292 } [McuMovementClient.cs@491] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.3846974. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531609, LCompressed = 1419292 } [McuMovementClient.cs@491] +06/28/2026 03:32:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=3880.3424336664907, PrevLayerFillRatio=0.282769065812041: Z1=99.30753016498159, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 36995.800192568524, Z2 = 37550 } } [LayerClient.cs@969] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5981061916577 (5981061916577 @ 0) for mcu = 49828.387738 [27/06/2026 00:57:24] (49842.18263814167 sec) to 5982635874431 (from now=5982515874431, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5981061916577 (5981061916577 @ 0) for mcu = 49828.387738 [27/06/2026 00:57:24] (49842.18263814167 sec) to 5982635874431 (from external timestamp, flags=None, requested=5982635874431 (5982635874431 @ 0) for mcu = 49841.504332 [27/06/2026 00:57:37] (49855.298953591664 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5981061916577 (5981061916577 @ 0) for mcu = 49828.387738 [27/06/2026 00:57:24] (49842.18263814167 sec) to 5982635874431 (from external timestamp, flags=None, requested=5982635874431 (5982635874431 @ 0) for mcu = 49841.504332 [27/06/2026 00:57:37] (49855.298953591664 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:32:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:32:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0711157. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.5596248. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66299578, XYCompressed = 6599569, LSource = 34531609, LCompressed = 1419292 } [McuMovementClient.cs@491] +06/28/2026 03:32:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:32:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:33:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:33:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 330, Weight=LayerWeight { Index = 330, FillTotalRelative = 0.1829003336791441, FillMaxRelative = 0.42405435869538105, TimeFromPreview = 37.463973865515484, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:33:01 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5984739117719, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:33:01 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5984859138940, flushed existing data. Was Timestamp=0, Now=5984739141525, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:33:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:33:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5982501597155 (5982501597155 @ 0) for mcu = 49840.385348 [27/06/2026 00:57:36] (49854.17997629166 sec) to 5984859534811 (from now=5984739534811, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5982501549155 (1531520396583710 @ 8) for mcu = 49840.384948 [27/06/2026 00:57:36] (49854.17957629264 sec) to 5984859534811 (from now=5984739534811, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5982501549155 (1531520396583710 @ 8) for mcu = 49840.384948 [27/06/2026 00:57:36] (49854.17957629264 sec) to 5984859534811 (from now=5984739534811, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:01 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:33:01 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:33:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.1769916. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (18 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.1769916. Loops = 77. GC duration = 00:00:00.4811637. SinceCollect=00:01:02.5314331. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66458152, XYCompressed = 6610424, LSource = 34613235, LCompressed = 1422112 } [McuMovementClient.cs@478] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=125399, gen1=31590, gen2=910, LatencyMode=Interactive, FreeMemory=5749833728, Live=354793880, HeapSizeBytes=356026328, FragmentedBytes=1808560, TotalCommittedBytes=365346816, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:33:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 330 [PrintingService.cs@2118] +06/28/2026 03:33:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0150933. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66458152, XYCompressed = 6610424, LSource = 34613235, LCompressed = 1422112 } [McuMovementClient.cs@491] +06/28/2026 03:33:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 331, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.06856657035463, Elapsed = 06:59:00.8035654, TimeTotal = 11:49:22.0681610, Remaining = 04:50:21.2645956, Incomplete = False, SoftCount = 566, LayerPrintDone = 331, WeightsDone = 331, WeightDone = 02:28:32.3453435, WeightTotal = 03:39:32.4152959, WeightTotalEstimate = 03:39:32.4152959, LayerRecoatElapsed = 02:15:49.2824332, LayerRecoatDelays = 00:22:48, LayerRecoatPrintLayersElapsed = 01:32:48.2881397, LayerRecoatNoDelayAverage = 00:00:14.8712334, StreamingElapsed = 02:24:11.1442788, ObjectLayerOverheadAverageDuration = 00:00:00.0221822, TimeLayers = 07:05:31.7721276, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:56.1202447, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.2603420, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.0685010, JobElapsed = 03:57:06.7711722, JobTotal = 06:22:20.4432846, WeightEstimate = 01:11:00.0699524 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:23:42. coolingEstimate=02:28:56.1202447 [PrintingService.cs@1912] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.06856657035463;StartedAtUtc;06:59:00.8035654;11:49:22.0681610;04:50:21.2645956;False;566;331;331;02:28:32.3453435;03:39:32.4152959;03:39:32.4152959;02:15:49.2824332;00:22:48;01:32:48.2881397;00:00:14.8712334;02:24:11.1442788;00:00:00.0221822;07:05:31.7721276;00:00:00;02:28:56.1202447;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.2603420;00:00:00;00:04:28.0685010;03:57:06.7711722;06:22:20.4432846 [PrintingService.cs@1918] +06/28/2026 03:33:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 330. PreviewWeight=LayerWeight { Index = 330, FillTotalRelative = 0.1829003336791441, FillMaxRelative = 0.42405435869538105, TimeFromPreview = 37.463973865515484, EnergyDensityIncreaseFactor = 0 }, FillArea=17841.394073192645, PreviewFillRatio=0.42405435869538105, Results=4, StreamingSeconds (preview) = 37.463973865515484, StreamingSeconds (extrapolated) = 36.9339469425755, StreamingSeconds (no overhead) = 20.6231855 (02:24:11.1442788), LayerElapsedSeconds=39.2564887, LayerStreamStats=StreamStats { EdgeCount = 78152, OnTraceLength = 15162.539020571858, AllTraceLength = 21706.80459814146 }, TotalStreamStats=StreamStats { EdgeCount = 32286339, OnTraceLength = 6197060.622109741, AllTraceLength = 14279464.057784608 } [PrintingService.cs@2147] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 331, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.068569482745126, Elapsed = 06:59:00.8001561, TimeTotal = 11:49:22.0602907, Remaining = 04:50:21.2601346, Incomplete = False, SoftCount = 566, LayerPrintDone = 331, WeightsDone = 331, WeightDone = 02:28:32.3419342, WeightTotal = 03:39:32.4094661, WeightTotalEstimate = 03:39:32.4094661, LayerRecoatElapsed = 02:15:49.2824332, LayerRecoatDelays = 00:22:48, LayerRecoatPrintLayersElapsed = 01:32:48.2881397, LayerRecoatNoDelayAverage = 00:00:14.8712334, StreamingElapsed = 02:24:11.1442788, ObjectLayerOverheadAverageDuration = 00:00:00.0221719, TimeLayers = 07:05:31.7662978, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:56.1182042, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.2603420, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.0685010, JobElapsed = 03:57:06.7724065, JobTotal = 06:22:20.4374548, WeightEstimate = 01:11:00.0675319 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:23:42. coolingEstimate=02:28:56.1182042 [PrintingService.cs@1912] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.068569482745126;StartedAtUtc;06:59:00.8001561;11:49:22.0602907;04:50:21.2601346;False;566;331;331;02:28:32.3419342;03:39:32.4094661;03:39:32.4094661;02:15:49.2824332;00:22:48;01:32:48.2881397;00:00:14.8712334;02:24:11.1442788;00:00:00.0221719;07:05:31.7662978;00:00:00;02:28:56.1182042;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.2603420;00:00:00;00:04:28.0685010;03:57:06.7724065;06:22:20.4374548 [PrintingService.cs@1918] +06/28/2026 03:33:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 331. PrevPreviewWeight=LayerWeight { Index = 330, FillTotalRelative = 0.1829003336791441, FillMaxRelative = 0.42405435869538105, TimeFromPreview = 37.463973865515484, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42405435869538105, PreviewWeight=LayerWeight { Index = 331, FillTotalRelative = 0.18238638744091618, FillMaxRelative = 0.4215728918551685, TimeFromPreview = 39.17023392470635, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0574044. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66458152, XYCompressed = 6610424, LSource = 34613235, LCompressed = 1422112 } [McuMovementClient.cs@491] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632208. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1219894. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66458152, XYCompressed = 6610424, LSource = 34613235, LCompressed = 1422112 } [McuMovementClient.cs@491] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1353328. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66458152, XYCompressed = 6610424, LSource = 34613235, LCompressed = 1422112 } [McuMovementClient.cs@491] +06/28/2026 03:33:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4109.357788116214, PrevLayerFillRatio=0.42405435869538105: Z1=105.16859774060023, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37100.968790309125, Z2 = 37650 } } [LayerClient.cs@969] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5983855327432 (5983855327432 @ 0) for mcu = 49851.666681 [27/06/2026 00:57:47] (49865.46106193333 sec) to 5987349671108 (from now=5987229671108, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5983855327432 (5983855327432 @ 0) for mcu = 49851.666681 [27/06/2026 00:57:47] (49865.46106193333 sec) to 5987349671108 (from external timestamp, flags=None, requested=5987349671108 (5987349671108 @ 0) for mcu = 49880.786841 [27/06/2026 00:58:16] (49894.580592566665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5983855327432 (5983855327432 @ 0) for mcu = 49851.666681 [27/06/2026 00:57:47] (49865.46106193333 sec) to 5987349671108 (from external timestamp, flags=None, requested=5987349671108 (5987349671108 @ 0) for mcu = 49880.786841 [27/06/2026 00:58:16] (49894.580592566665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:33:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0190018 ~ 5.98 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:33:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0758608. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3121311. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66458152, XYCompressed = 6610424, LSource = 34613235, LCompressed = 1422112 } [McuMovementClient.cs@491] +06/28/2026 03:33:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:33:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:33:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:33:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 331, Weight=LayerWeight { Index = 331, FillTotalRelative = 0.18238638744091618, FillMaxRelative = 0.4215728918551685, TimeFromPreview = 39.17023392470635, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:33:36 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5988937154598, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:33:36 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5989057166194, flushed existing data. Was Timestamp=0, Now=5988937168788, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:33:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:33:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5987154451097 (5987154451097 @ 0) for mcu = 49879.159979 [27/06/2026 00:58:15] (49892.95375914167 sec) to 5989057209086 (from now=5988937209086, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5987154475126 (1532711545632474 @ 8) for mcu = 49879.160180 [27/06/2026 00:58:15] (49892.95395939043 sec) to 5989057209086 (from now=5988937209086, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5987154475101 (1532711545625905 @ 8) for mcu = 49879.160179 [27/06/2026 00:58:15] (49892.95395917659 sec) to 5989057209086 (from now=5988937209086, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:36 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:33:37 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:33:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134 [HeaterCheck.cs@111] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.9517804. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.7216047. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66670390, XYCompressed = 6630504, LSource = 34722156, LCompressed = 1425273 } [McuMovementClient.cs@491] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:33:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 331 [PrintingService.cs@2118] +06/28/2026 03:33:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.7347602. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66670390, XYCompressed = 6630504, LSource = 34722156, LCompressed = 1425273 } [McuMovementClient.cs@491] +06/28/2026 03:33:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 332, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.19738781170397, Elapsed = 06:59:35.5260553, TimeTotal = 11:48:48.1029889, Remaining = 04:49:12.5769336, Incomplete = False, SoftCount = 566, LayerPrintDone = 332, WeightsDone = 332, WeightDone = 02:28:52.7271021, WeightTotal = 03:39:13.7143378, WeightTotalEstimate = 03:39:13.7143378, LayerRecoatElapsed = 02:16:03.6231645, LayerRecoatDelays = 00:22:51, LayerRecoatPrintLayersElapsed = 01:33:02.6288711, LayerRecoatNoDelayAverage = 00:00:14.8635080, StreamingElapsed = 02:24:31.5072748, ObjectLayerOverheadAverageDuration = 00:00:00.0221719, TimeLayers = 07:05:06.6127409, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:47.3144593, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:42.2560400, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.9526200, JobElapsed = 03:57:41.4926685, JobTotal = 06:21:56.4040809, WeightEstimate = 01:10:20.9872357 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:23:08. coolingEstimate=02:28:47.3144593 [PrintingService.cs@1912] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.19738781170397;StartedAtUtc;06:59:35.5260553;11:48:48.1029889;04:49:12.5769336;False;566;332;332;02:28:52.7271021;03:39:13.7143378;03:39:13.7143378;02:16:03.6231645;00:22:51;01:33:02.6288711;00:00:14.8635080;02:24:31.5072748;00:00:00.0221719;07:05:06.6127409;00:00:00;02:28:47.3144593;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:42.2560400;00:00:00;00:04:27.9526200;03:57:41.4926685;06:21:56.4040809 [PrintingService.cs@1918] +06/28/2026 03:33:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 331. PreviewWeight=LayerWeight { Index = 331, FillTotalRelative = 0.18238638744091618, FillMaxRelative = 0.4215728918551685, TimeFromPreview = 39.17023392470635, EnergyDensityIncreaseFactor = 0 }, FillArea=20151.993071881818, PreviewFillRatio=0.4215728918551685, Results=4, StreamingSeconds (preview) = 39.17023392470635, StreamingSeconds (extrapolated) = 38.05812431545008, StreamingSeconds (no overhead) = 20.362996 (02:24:31.5072748), LayerElapsedSeconds=34.7202903, LayerStreamStats=StreamStats { EdgeCount = 104803, OnTraceLength = 20421.927457012236, AllTraceLength = 28450.912655435503 }, TotalStreamStats=StreamStats { EdgeCount = 32391142, OnTraceLength = 6217482.549566753, AllTraceLength = 14307914.970440043 } [PrintingService.cs@2147] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 332, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.197391546333996, Elapsed = 06:59:35.5216728, TimeTotal = 11:48:48.0929027, Remaining = 04:49:12.5712299, Incomplete = False, SoftCount = 566, LayerPrintDone = 332, WeightsDone = 332, WeightDone = 02:28:52.7227196, WeightTotal = 03:39:13.7068665, WeightTotalEstimate = 03:39:13.7068666, LayerRecoatElapsed = 02:16:03.6231645, LayerRecoatDelays = 00:22:51, LayerRecoatPrintLayersElapsed = 01:33:02.6288711, LayerRecoatNoDelayAverage = 00:00:14.8635080, StreamingElapsed = 02:24:31.5072748, ObjectLayerOverheadAverageDuration = 00:00:00.0221587, TimeLayers = 07:05:06.6052696, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:47.3118444, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:42.2560400, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.9526200, JobElapsed = 03:57:41.4946051, JobTotal = 06:21:56.3966096, WeightEstimate = 01:10:20.9841470 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:23:08. coolingEstimate=02:28:47.3118444 [PrintingService.cs@1912] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.197391546333996;StartedAtUtc;06:59:35.5216728;11:48:48.0929027;04:49:12.5712299;False;566;332;332;02:28:52.7227196;03:39:13.7068665;03:39:13.7068666;02:16:03.6231645;00:22:51;01:33:02.6288711;00:00:14.8635080;02:24:31.5072748;00:00:00.0221587;07:05:06.6052696;00:00:00;02:28:47.3118444;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:42.2560400;00:00:00;00:04:27.9526200;03:57:41.4946051;06:21:56.3966096 [PrintingService.cs@1918] +06/28/2026 03:33:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 332. PrevPreviewWeight=LayerWeight { Index = 331, FillTotalRelative = 0.18238638744091618, FillMaxRelative = 0.4215728918551685, TimeFromPreview = 39.17023392470635, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4215728918551685, PreviewWeight=LayerWeight { Index = 332, FillTotalRelative = 0.18293883531941038, FillMaxRelative = 0.4247890706682214, TimeFromPreview = 37.70835187259886, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.7533536. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66670390, XYCompressed = 6630504, LSource = 34722156, LCompressed = 1425273 } [McuMovementClient.cs@491] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633222. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.8175918. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66670390, XYCompressed = 6630504, LSource = 34722156, LCompressed = 1425273 } [McuMovementClient.cs@491] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.8303945. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66670390, XYCompressed = 6630504, LSource = 34722156, LCompressed = 1425273 } [McuMovementClient.cs@491] +06/28/2026 03:33:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4105.335472726065, PrevLayerFillRatio=0.4215728918551685: Z1=105.06565677243346, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37206.03444708156, Z2 = 37750 } } [LayerClient.cs@969] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5988569385303 (5988569385303 @ 0) for mcu = 49890.951324 [27/06/2026 00:58:26] (49904.744877525 sec) to 5991512962999 (from now=5991392962999, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5988569385303 (5988569385303 @ 0) for mcu = 49890.951324 [27/06/2026 00:58:26] (49904.744877525 sec) to 5991512962999 (from external timestamp, flags=None, requested=5991512962999 (5991512962999 @ 0) for mcu = 49915.481645 [27/06/2026 00:58:51] (49929.274691658335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5988569385303 (5988569385303 @ 0) for mcu = 49890.951324 [27/06/2026 00:58:26] (49904.744877525 sec) to 5991512962999 (from external timestamp, flags=None, requested=5991512962999 (5991512962999 @ 0) for mcu = 49915.481645 [27/06/2026 00:58:51] (49929.274691658335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:33:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:34:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0815203. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.0058663. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66670390, XYCompressed = 6630504, LSource = 34722156, LCompressed = 1425273 } [McuMovementClient.cs@491] +06/28/2026 03:34:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:34:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:34:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:34:14 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 332, Weight=LayerWeight { Index = 332, FillTotalRelative = 0.18293883531941038, FillMaxRelative = 0.4247890706682214, TimeFromPreview = 37.70835187259886, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:34:14 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5993606944460, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:34:14 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5993726950876, flushed existing data. Was Timestamp=0, Now=5993606953427, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:34:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:34:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5991378403643 (5991378403643 @ 0) for mcu = 49914.360328 [27/06/2026 00:58:50] (49928.153363691665 sec) to 5993727034650 (from now=5993607034650, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:34:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5991378427606 (1533792877467267 @ 8) for mcu = 49914.360527 [27/06/2026 00:58:50] (49928.1535633876 sec) to 5993727034650 (from now=5993607034650, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:34:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5991378427618 (1533792877470361 @ 8) for mcu = 49914.360527 [27/06/2026 00:58:50] (49928.15356348831 sec) to 5993727034650 (from now=5993607034650, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:34:15 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:34:15 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:34:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:34:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1034987 ~ 6.02 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.1868569. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.1868569. Loops = 77. GC duration = 00:00:00.3572651. SinceCollect=00:01:13.7813269. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66828976, XYCompressed = 6641353, LSource = 34803810, LCompressed = 1428071 } [McuMovementClient.cs@478] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=125595, gen1=31672, gen2=911, LatencyMode=Interactive, FreeMemory=5728698368, Live=356856688, HeapSizeBytes=364898768, FragmentedBytes=8463480, TotalCommittedBytes=375717888, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (13 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:34:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 332 [PrintingService.cs@2118] +06/28/2026 03:34:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0132226. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66828976, XYCompressed = 6641353, LSource = 34803810, LCompressed = 1428071 } [McuMovementClient.cs@491] +06/28/2026 03:34:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 333, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.319387777831224, Elapsed = 07:00:14.5837286, TimeTotal = 11:48:26.4800450, Remaining = 04:48:11.8963164, Incomplete = False, SoftCount = 566, LayerPrintDone = 333, WeightsDone = 333, WeightDone = 02:29:13.2479501, WeightTotal = 03:38:56.4683273, WeightTotalEstimate = 03:38:56.4683274, LayerRecoatElapsed = 02:16:22.1599898, LayerRecoatDelays = 00:22:54, LayerRecoatPrintLayersElapsed = 01:33:21.1656963, LayerRecoatNoDelayAverage = 00:00:14.8649781, StreamingElapsed = 02:24:52.0103466, ObjectLayerOverheadAverageDuration = 00:00:00.0221587, TimeLayers = 07:04:50.5957454, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:41.7085109, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:42.4471530, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.9746715, JobElapsed = 03:58:20.5536169, JobTotal = 06:21:40.1739209, WeightEstimate = 01:09:43.2203773 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:22:47. coolingEstimate=02:28:41.7085109 [PrintingService.cs@1912] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.319387777831224;StartedAtUtc;07:00:14.5837286;11:48:26.4800450;04:48:11.8963164;False;566;333;333;02:29:13.2479501;03:38:56.4683273;03:38:56.4683274;02:16:22.1599898;00:22:54;01:33:21.1656963;00:00:14.8649781;02:24:52.0103466;00:00:00.0221587;07:04:50.5957454;00:00:00;02:28:41.7085109;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:42.4471530;00:00:00;00:04:27.9746715;03:58:20.5536169;06:21:40.1739209 [PrintingService.cs@1918] +06/28/2026 03:34:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 332. PreviewWeight=LayerWeight { Index = 332, FillTotalRelative = 0.18293883531941038, FillMaxRelative = 0.4247890706682214, TimeFromPreview = 37.70835187259886, EnergyDensityIncreaseFactor = 0 }, FillArea=20038.409229477897, PreviewFillRatio=0.4247890706682214, Results=4, StreamingSeconds (preview) = 37.70835187259886, StreamingSeconds (extrapolated) = 36.74161094684184, StreamingSeconds (no overhead) = 20.5030718 (02:24:52.0103466), LayerElapsedSeconds=39.0593584, LayerStreamStats=StreamStats { EdgeCount = 78168, OnTraceLength = 15163.125166958198, AllTraceLength = 21547.092865159735 }, TotalStreamStats=StreamStats { EdgeCount = 32469310, OnTraceLength = 6232645.674733711, AllTraceLength = 14329462.063305203 } [PrintingService.cs@2147] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 333, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.319388428601684, Elapsed = 07:00:14.5829628, TimeTotal = 11:48:26.4782877, Remaining = 04:48:11.8953249, Incomplete = False, SoftCount = 566, LayerPrintDone = 333, WeightsDone = 333, WeightDone = 02:29:13.2471843, WeightTotal = 03:38:56.4670256, WeightTotalEstimate = 03:38:56.4670256, LayerRecoatElapsed = 02:16:22.1599898, LayerRecoatDelays = 00:22:54, LayerRecoatPrintLayersElapsed = 01:33:21.1656963, LayerRecoatNoDelayAverage = 00:00:14.8649781, StreamingElapsed = 02:24:52.0103466, ObjectLayerOverheadAverageDuration = 00:00:00.0221564, TimeLayers = 07:04:50.5944437, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:41.7080553, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:42.4471530, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.9746715, JobElapsed = 03:58:20.5557544, JobTotal = 06:21:40.1726192, WeightEstimate = 01:09:43.2198413 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:22:47. coolingEstimate=02:28:41.7080553 [PrintingService.cs@1912] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.319388428601684;StartedAtUtc;07:00:14.5829628;11:48:26.4782877;04:48:11.8953249;False;566;333;333;02:29:13.2471843;03:38:56.4670256;03:38:56.4670256;02:16:22.1599898;00:22:54;01:33:21.1656963;00:00:14.8649781;02:24:52.0103466;00:00:00.0221564;07:04:50.5944437;00:00:00;02:28:41.7080553;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:42.4471530;00:00:00;00:04:27.9746715;03:58:20.5557544;06:21:40.1726192 [PrintingService.cs@1918] +06/28/2026 03:34:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 333. PrevPreviewWeight=LayerWeight { Index = 332, FillTotalRelative = 0.18293883531941038, FillMaxRelative = 0.4247890706682214, TimeFromPreview = 37.70835187259886, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4247890706682214, PreviewWeight=LayerWeight { Index = 333, FillTotalRelative = 0.18237442271342735, FillMaxRelative = 0.4221676603037643, TimeFromPreview = 39.60932034766946, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0412500. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66828976, XYCompressed = 6641353, LSource = 34803810, LCompressed = 1428071 } [McuMovementClient.cs@491] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632221. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1054604. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66828976, XYCompressed = 6641353, LSource = 34803810, LCompressed = 1428071 } [McuMovementClient.cs@491] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1174321. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66828976, XYCompressed = 6641353, LSource = 34803810, LCompressed = 1428071 } [McuMovementClient.cs@491] +06/28/2026 03:34:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4110.548714074923, PrevLayerFillRatio=0.4247890706682214: Z1=105.19907647220461, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37311.23352355377, Z2 = 37850 } } [LayerClient.cs@969] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5992732687000 (5992732687000 @ 0) for mcu = 49925.646247 [27/06/2026 00:59:01] (49939.43905833333 sec) to 5996201078764 (from now=5996081078764, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5992732687000 (5992732687000 @ 0) for mcu = 49925.646247 [27/06/2026 00:59:01] (49939.43905833333 sec) to 5996201078764 (from external timestamp, flags=None, requested=5996201078764 (5996201078764 @ 0) for mcu = 49954.550106 [27/06/2026 00:59:30] (49968.342323033336 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5992732687000 (5992732687000 @ 0) for mcu = 49925.646247 [27/06/2026 00:59:01] (49939.43905833333 sec) to 5996201078764 (from external timestamp, flags=None, requested=5996201078764 (5996201078764 @ 0) for mcu = 49954.550106 [27/06/2026 00:59:30] (49968.342323033336 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:34:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:34:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0717369. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2945175. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 66828976, XYCompressed = 6641353, LSource = 34803810, LCompressed = 1428071 } [McuMovementClient.cs@491] +06/28/2026 03:34:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:34:53 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:34:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:34:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 333, Weight=LayerWeight { Index = 333, FillTotalRelative = 0.18237442271342735, FillMaxRelative = 0.4221676603037643, TimeFromPreview = 39.60932034766946, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:34:56 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=5998615394936, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:34:56 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 5998735403532, flushed existing data. Was Timestamp=0, Now=5998615406087, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:34:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:34:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 5996022496382 (5996022496382 @ 0) for mcu = 49953.061931 [27/06/2026 00:59:29] (49966.85413651667 sec) to 5998735470517 (from now=5998615470517, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:34:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 5996022520416 (1534981765226618 @ 8) for mcu = 49953.062131 [27/06/2026 00:59:29] (49966.85433680397 sec) to 5998735470517 (from now=5998615470517, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:34:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 5996022520361 (1534981765212514 @ 8) for mcu = 49953.062131 [27/06/2026 00:59:29] (49966.854336344855 sec) to 5998735470517 (from now=5998615470517, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:34:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:34:57 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:34:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:19.0105930. Loops = 77. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.5211429. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67041116, XYCompressed = 6661443, LSource = 34912682, LCompressed = 1431247 } [McuMovementClient.cs@491] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:35:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 333 [PrintingService.cs@2118] +06/28/2026 03:35:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.5364860. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67041116, XYCompressed = 6661443, LSource = 34912682, LCompressed = 1431247 } [McuMovementClient.cs@491] +06/28/2026 03:35:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 334, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.440691150385625, Elapsed = 07:00:56.1049709, TimeTotal = 11:48:09.5883310, Remaining = 04:47:13.4833601, Incomplete = False, SoftCount = 566, LayerPrintDone = 334, WeightsDone = 334, WeightDone = 02:29:33.5575478, WeightTotal = 03:38:37.8604602, WeightTotalEstimate = 03:38:37.8604602, LayerRecoatElapsed = 02:16:43.3716344, LayerRecoatDelays = 00:22:57, LayerRecoatPrintLayersElapsed = 01:33:42.3773407, LayerRecoatNoDelayAverage = 00:00:14.8722694, StreamingElapsed = 02:25:12.2985537, ObjectLayerOverheadAverageDuration = 00:00:00.0221564, TimeLayers = 07:04:38.0833647, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:37.3291776, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.3950220, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.0840410, JobElapsed = 03:59:02.0774739, JobTotal = 06:21:26.6043017, WeightEstimate = 01:09:04.3029124 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:22:30. coolingEstimate=02:28:37.3291776 [PrintingService.cs@1912] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.440691150385625;StartedAtUtc;07:00:56.1049709;11:48:09.5883310;04:47:13.4833601;False;566;334;334;02:29:33.5575478;03:38:37.8604602;03:38:37.8604602;02:16:43.3716344;00:22:57;01:33:42.3773407;00:00:14.8722694;02:25:12.2985537;00:00:00.0221564;07:04:38.0833647;00:00:00;02:28:37.3291776;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.3950220;00:00:00;00:04:28.0840410;03:59:02.0774739;06:21:26.6043017 [PrintingService.cs@1918] +06/28/2026 03:35:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 333. PreviewWeight=LayerWeight { Index = 333, FillTotalRelative = 0.18237442271342735, FillMaxRelative = 0.4221676603037643, TimeFromPreview = 39.60932034766946, EnergyDensityIncreaseFactor = 0 }, FillArea=19361.57146034453, PreviewFillRatio=0.4221676603037643, Results=4, StreamingSeconds (preview) = 39.60932034766946, StreamingSeconds (extrapolated) = 37.89477247911951, StreamingSeconds (no overhead) = 20.2882071 (02:25:12.2985537), LayerElapsedSeconds=41.5185024, LayerStreamStats=StreamStats { EdgeCount = 104758, OnTraceLength = 20418.321710288525, AllTraceLength = 28235.83126564324 }, TotalStreamStats=StreamStats { EdgeCount = 32574068, OnTraceLength = 6253063.996444, AllTraceLength = 14357697.894570846 } [PrintingService.cs@2147] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 334, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.44068976425917, Elapsed = 07:00:56.1066074, TimeTotal = 11:48:09.5920750, Remaining = 04:47:13.4854676, Incomplete = False, SoftCount = 566, LayerPrintDone = 334, WeightsDone = 334, WeightDone = 02:29:33.5591843, WeightTotal = 03:38:37.8632335, WeightTotalEstimate = 03:38:37.8632336, LayerRecoatElapsed = 02:16:43.3716344, LayerRecoatDelays = 00:22:57, LayerRecoatPrintLayersElapsed = 01:33:42.3773407, LayerRecoatNoDelayAverage = 00:00:14.8722694, StreamingElapsed = 02:25:12.2985537, ObjectLayerOverheadAverageDuration = 00:00:00.0221613, TimeLayers = 07:04:38.0861380, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:37.3301483, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.3950220, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.0840410, JobElapsed = 03:59:02.0792507, JobTotal = 06:21:26.6070750, WeightEstimate = 01:09:04.3040493 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:22:30. coolingEstimate=02:28:37.3301483 [PrintingService.cs@1912] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.44068976425917;StartedAtUtc;07:00:56.1066074;11:48:09.5920750;04:47:13.4854676;False;566;334;334;02:29:33.5591843;03:38:37.8632335;03:38:37.8632336;02:16:43.3716344;00:22:57;01:33:42.3773407;00:00:14.8722694;02:25:12.2985537;00:00:00.0221613;07:04:38.0861380;00:00:00;02:28:37.3301483;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.3950220;00:00:00;00:04:28.0840410;03:59:02.0792507;06:21:26.6070750 [PrintingService.cs@1918] +06/28/2026 03:35:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 334. PrevPreviewWeight=LayerWeight { Index = 333, FillTotalRelative = 0.18237442271342735, FillMaxRelative = 0.4221676603037643, TimeFromPreview = 39.60932034766946, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4221676603037643, PreviewWeight=LayerWeight { Index = 334, FillTotalRelative = 0.18283052969839877, FillMaxRelative = 0.425193178841022, TimeFromPreview = 37.597250675704714, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.5575571. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67041116, XYCompressed = 6661443, LSource = 34912682, LCompressed = 1431247 } [McuMovementClient.cs@491] +06/28/2026 03:35:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632395. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.6206778. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67041116, XYCompressed = 6661443, LSource = 34912682, LCompressed = 1431247 } [McuMovementClient.cs@491] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.6338587. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67041116, XYCompressed = 6661443, LSource = 34912682, LCompressed = 1431247 } [McuMovementClient.cs@491] +06/28/2026 03:35:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4106.299558260312, PrevLayerFillRatio=0.4221676603037643: Z1=105.09033009828305, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37416.32385365205, Z2 = 37950 } } [LayerClient.cs@969] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 5997420792335 (5997420792335 @ 0) for mcu = 49964.714629 [27/06/2026 00:59:40] (49978.50660279167 sec) to 6001182935244 (from now=6001062935244, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 5997420792335 (5997420792335 @ 0) for mcu = 49964.714629 [27/06/2026 00:59:40] (49978.50660279167 sec) to 6001182935244 (from external timestamp, flags=None, requested=6001182935244 (6001182935244 @ 0) for mcu = 49996.066482 [27/06/2026 01:00:12] (50009.8577937 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 5997420792335 (5997420792335 @ 0) for mcu = 49964.714629 [27/06/2026 00:59:40] (49978.50660279167 sec) to 6001182935244 (from external timestamp, flags=None, requested=6001182935244 (6001182935244 @ 0) for mcu = 49996.066482 [27/06/2026 01:00:12] (50009.8577937 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134 [HeaterCheck.cs@111] +06/28/2026 03:35:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0783165 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:35:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0758531. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.8106707. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67041116, XYCompressed = 6661443, LSource = 34912682, LCompressed = 1431247 } [McuMovementClient.cs@491] +06/28/2026 03:35:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:35:28 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:35:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:35:31 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 334, Weight=LayerWeight { Index = 334, FillTotalRelative = 0.18283052969839877, FillMaxRelative = 0.425193178841022, TimeFromPreview = 37.597250675704714, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:35:31 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6002765937765, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:35:31 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6002885955745, flushed existing data. Was Timestamp=0, Now=6002765958301, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:35:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6001047849704 (6001047849704 @ 0) for mcu = 49994.940756 [27/06/2026 01:00:10] (50008.73208086667 sec) to 6002886398888 (from now=6002766398888, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:35:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6001047873718 (1536268255671852 @ 8) for mcu = 49994.940956 [27/06/2026 01:00:10] (50008.73228098477 sec) to 6002886398888 (from now=6002766398888, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:35:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6001047873690 (1536268255664798 @ 8) for mcu = 49994.940956 [27/06/2026 01:00:10] (50008.732280755146 sec) to 6002886398888 (from now=6002766398888, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:35:31 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:35:32 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:35:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.1556227. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.1556227. Loops = 77. GC duration = 00:00:00.3625476. SinceCollect=00:01:16.2802667. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67199698, XYCompressed = 6672290, LSource = 34994316, LCompressed = 1434052 } [McuMovementClient.cs@478] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=125772, gen1=31745, gen2=912, LatencyMode=Interactive, FreeMemory=5709529088, Live=355887552, HeapSizeBytes=368295320, FragmentedBytes=12839872, TotalCommittedBytes=378339328, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:35:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 334 [PrintingService.cs@2118] +06/28/2026 03:35:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (204 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0132863. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67199698, XYCompressed = 6672290, LSource = 34994316, LCompressed = 1434052 } [McuMovementClient.cs@491] +06/28/2026 03:35:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 335, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.56758895936902, Elapsed = 07:01:30.8663453, TimeTotal = 11:47:37.4282544, Remaining = 04:46:06.5619091, Incomplete = False, SoftCount = 566, LayerPrintDone = 335, WeightsDone = 335, WeightDone = 02:29:54.0376450, WeightTotal = 03:38:20.5644171, WeightTotalEstimate = 03:38:20.5644172, LayerRecoatElapsed = 02:16:57.6529116, LayerRecoatDelays = 00:23:00, LayerRecoatPrintLayersElapsed = 01:33:56.6586182, LayerRecoatNoDelayAverage = 00:00:14.8644629, StreamingElapsed = 02:25:32.7548531, ObjectLayerOverheadAverageDuration = 00:00:00.0221613, TimeLayers = 07:04:14.2610857, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:28.9913800, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:42.3801770, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.9669435, JobElapsed = 03:59:36.8314451, JobTotal = 06:21:03.9139652, WeightEstimate = 01:08:26.5267722 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:21:58. coolingEstimate=02:28:28.9913800 [PrintingService.cs@1912] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.56758895936902;StartedAtUtc;07:01:30.8663453;11:47:37.4282544;04:46:06.5619091;False;566;335;335;02:29:54.0376450;03:38:20.5644171;03:38:20.5644172;02:16:57.6529116;00:23:00;01:33:56.6586182;00:00:14.8644629;02:25:32.7548531;00:00:00.0221613;07:04:14.2610857;00:00:00;02:28:28.9913800;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:42.3801770;00:00:00;00:04:27.9669435;03:59:36.8314451;06:21:03.9139652 [PrintingService.cs@1918] +06/28/2026 03:35:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 334. PreviewWeight=LayerWeight { Index = 334, FillTotalRelative = 0.18283052969839877, FillMaxRelative = 0.425193178841022, TimeFromPreview = 37.597250675704714, EnergyDensityIncreaseFactor = 0 }, FillArea=17864.14744169364, PreviewFillRatio=0.425193178841022, Results=4, StreamingSeconds (preview) = 37.597250675704714, StreamingSeconds (extrapolated) = 36.75511581870533, StreamingSeconds (no overhead) = 20.4562994 (02:25:32.7548531), LayerElapsedSeconds=34.7521048, LayerStreamStats=StreamStats { EdgeCount = 78156, OnTraceLength = 15162.848369713873, AllTraceLength = 21455.44991930388 }, TotalStreamStats=StreamStats { EdgeCount = 32652224, OnTraceLength = 6268226.844813714, AllTraceLength = 14379153.34449015 } [PrintingService.cs@2147] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 335, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.56759394024074, Elapsed = 07:01:30.8604494, TimeTotal = 11:47:37.4148064, Remaining = 04:46:06.5543570, Incomplete = False, SoftCount = 566, LayerPrintDone = 335, WeightsDone = 335, WeightDone = 02:29:54.0317491, WeightTotal = 03:38:20.5544556, WeightTotalEstimate = 03:38:20.5544556, LayerRecoatElapsed = 02:16:57.6529116, LayerRecoatDelays = 00:23:00, LayerRecoatPrintLayersElapsed = 01:33:56.6586182, LayerRecoatNoDelayAverage = 00:00:14.8644629, StreamingElapsed = 02:25:32.7548531, ObjectLayerOverheadAverageDuration = 00:00:00.0221437, TimeLayers = 07:04:14.2511242, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:28.9878935, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:42.3801770, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.9669435, JobElapsed = 03:59:36.8353382, JobTotal = 06:21:03.9040037, WeightEstimate = 01:08:26.5227065 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:21:58. coolingEstimate=02:28:28.9878935 [PrintingService.cs@1912] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.56759394024074;StartedAtUtc;07:01:30.8604494;11:47:37.4148064;04:46:06.5543570;False;566;335;335;02:29:54.0317491;03:38:20.5544556;03:38:20.5544556;02:16:57.6529116;00:23:00;01:33:56.6586182;00:00:14.8644629;02:25:32.7548531;00:00:00.0221437;07:04:14.2511242;00:00:00;02:28:28.9878935;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:42.3801770;00:00:00;00:04:27.9669435;03:59:36.8353382;06:21:03.9040037 [PrintingService.cs@1918] +06/28/2026 03:35:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 335. PrevPreviewWeight=LayerWeight { Index = 334, FillTotalRelative = 0.18283052969839877, FillMaxRelative = 0.425193178841022, TimeFromPreview = 37.597250675704714, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.425193178841022, PreviewWeight=LayerWeight { Index = 335, FillTotalRelative = 0.18266523589728428, FillMaxRelative = 0.42373010952563755, TimeFromPreview = 36.44244795951865, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0322734. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67199698, XYCompressed = 6672290, LSource = 34994316, LCompressed = 1434052 } [McuMovementClient.cs@491] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632497. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0984313. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67199698, XYCompressed = 6672290, LSource = 34994316, LCompressed = 1434052 } [McuMovementClient.cs@491] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1146163. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67199698, XYCompressed = 6672290, LSource = 34994316, LCompressed = 1434052 } [McuMovementClient.cs@491] +06/28/2026 03:35:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4111.203750239984, PrevLayerFillRatio=0.425193178841022: Z1=105.21584046271137, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37521.53969411476, Z2 = 38050 } } [LayerClient.cs@969] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6002402619585 (6002402619585 @ 0) for mcu = 50006.230821 [27/06/2026 01:00:22] (50020.021829875 sec) to 6005354209932 (from now=6005234209932, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6002402619585 (6002402619585 @ 0) for mcu = 50006.230821 [27/06/2026 01:00:22] (50020.021829875 sec) to 6005354209932 (from external timestamp, flags=None, requested=6005354209932 (6005354209932 @ 0) for mcu = 50030.827970 [27/06/2026 01:00:46] (50044.6184161 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6002402619585 (6002402619585 @ 0) for mcu = 50006.230821 [27/06/2026 01:00:22] (50020.021829875 sec) to 6005354209932 (from external timestamp, flags=None, requested=6005354209932 (6005354209932 @ 0) for mcu = 50030.827970 [27/06/2026 01:00:46] (50044.6184161 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:35:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:36:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0779566. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2917052. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67199698, XYCompressed = 6672290, LSource = 34994316, LCompressed = 1434052 } [McuMovementClient.cs@491] +06/28/2026 03:36:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:36:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:36:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:36:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 335, Weight=LayerWeight { Index = 335, FillTotalRelative = 0.18266523589728428, FillMaxRelative = 0.42373010952563755, TimeFromPreview = 36.44244795951865, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:36:06 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6006939883850, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:36:06 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6007059887527, flushed existing data. Was Timestamp=0, Now=6006939890096, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:36:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:36:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6005175514094 (6005175514094 @ 0) for mcu = 50029.338728 [27/06/2026 01:00:45] (50043.129284116665 sec) to 6007059899874 (from now=6006939899874, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:36:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6005175538122 (1537324937759423 @ 8) for mcu = 50029.338928 [27/06/2026 01:00:45] (50043.12948435622 sec) to 6007059899874 (from now=6006939899874, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:36:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6005175538070 (1537324937745984 @ 8) for mcu = 50029.338927 [27/06/2026 01:00:45] (50043.12948391875 sec) to 6007059899874 (from now=6006939899874, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:36:06 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:36:07 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:36:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.8180886. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4293509. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67412984, XYCompressed = 6691672, LSource = 35103422, LCompressed = 1436979 } [McuMovementClient.cs@491] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:36:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 335 [PrintingService.cs@2118] +06/28/2026 03:36:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4416873. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67412984, XYCompressed = 6691672, LSource = 35103422, LCompressed = 1436979 } [McuMovementClient.cs@491] +06/28/2026 03:36:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 336, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.69570632185091, Elapsed = 07:02:05.2933300, TimeTotal = 11:47:03.9780219, Remaining = 04:44:58.6846919, Incomplete = False, SoftCount = 566, LayerPrintDone = 336, WeightsDone = 336, WeightDone = 02:30:14.1612300, WeightTotal = 03:38:02.2442928, WeightTotalEstimate = 03:38:02.2442928, LayerRecoatElapsed = 02:17:11.9563113, LayerRecoatDelays = 00:23:03, LayerRecoatPrintLayersElapsed = 01:34:10.9620179, LayerRecoatNoDelayAverage = 00:00:14.8567382, StreamingElapsed = 02:25:52.8621903, ObjectLayerOverheadAverageDuration = 00:00:00.0221437, TimeLayers = 07:03:49.4831357, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:20.3190975, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.3759660, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8510730, JobElapsed = 04:00:11.2598892, JobTotal = 06:20:40.2560967, WeightEstimate = 01:07:48.0830628 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:21:24. coolingEstimate=02:28:20.3190975 [PrintingService.cs@1912] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.69570632185091;StartedAtUtc;07:02:05.2933300;11:47:03.9780219;04:44:58.6846919;False;566;336;336;02:30:14.1612300;03:38:02.2442928;03:38:02.2442928;02:17:11.9563113;00:23:03;01:34:10.9620179;00:00:14.8567382;02:25:52.8621903;00:00:00.0221437;07:03:49.4831357;00:00:00;02:28:20.3190975;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.3759660;00:00:00;00:04:27.8510730;04:00:11.2598892;06:20:40.2560967 [PrintingService.cs@1918] +06/28/2026 03:36:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 335. PreviewWeight=LayerWeight { Index = 335, FillTotalRelative = 0.18266523589728428, FillMaxRelative = 0.42373010952563755, TimeFromPreview = 36.44244795951865, EnergyDensityIncreaseFactor = 0 }, FillArea=20206.620611802602, PreviewFillRatio=0.42373010952563755, Results=4, StreamingSeconds (preview) = 36.44244795951865, StreamingSeconds (extrapolated) = 37.41750000499905, StreamingSeconds (no overhead) = 20.1073372 (02:25:52.8621903), LayerElapsedSeconds=34.4245809, LayerStreamStats=StreamStats { EdgeCount = 105448, OnTraceLength = 20623.133019670844, AllTraceLength = 26627.993493273854 }, TotalStreamStats=StreamStats { EdgeCount = 32757672, OnTraceLength = 6288849.977833385, AllTraceLength = 14405781.337983424 } [PrintingService.cs@2147] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 336, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.69571005980402, Elapsed = 07:02:05.2888947, TimeTotal = 11:47:03.9679356, Remaining = 04:44:58.6790409, Incomplete = False, SoftCount = 566, LayerPrintDone = 336, WeightsDone = 336, WeightDone = 02:30:14.1567947, WeightTotal = 03:38:02.2368215, WeightTotalEstimate = 03:38:02.2368216, LayerRecoatElapsed = 02:17:11.9563113, LayerRecoatDelays = 00:23:03, LayerRecoatPrintLayersElapsed = 01:34:10.9620179, LayerRecoatNoDelayAverage = 00:00:14.8567382, StreamingElapsed = 02:25:52.8621903, ObjectLayerOverheadAverageDuration = 00:00:00.0221305, TimeLayers = 07:03:49.4756644, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:20.3164825, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.3759660, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8510730, JobElapsed = 04:00:11.2609555, JobTotal = 06:20:40.2486254, WeightEstimate = 01:07:48.0800269 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:21:24. coolingEstimate=02:28:20.3164825 [PrintingService.cs@1912] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.69571005980402;StartedAtUtc;07:02:05.2888947;11:47:03.9679356;04:44:58.6790409;False;566;336;336;02:30:14.1567947;03:38:02.2368215;03:38:02.2368216;02:17:11.9563113;00:23:03;01:34:10.9620179;00:00:14.8567382;02:25:52.8621903;00:00:00.0221305;07:03:49.4756644;00:00:00;02:28:20.3164825;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.3759660;00:00:00;00:04:27.8510730;04:00:11.2609555;06:20:40.2486254 [PrintingService.cs@1918] +06/28/2026 03:36:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 336. PrevPreviewWeight=LayerWeight { Index = 335, FillTotalRelative = 0.18266523589728428, FillMaxRelative = 0.42373010952563755, TimeFromPreview = 36.44244795951865, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42373010952563755, PreviewWeight=LayerWeight { Index = 336, FillTotalRelative = 0.18315241742866797, FillMaxRelative = 0.4267319353998782, TimeFromPreview = 35.50712045987969, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4575990. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67412984, XYCompressed = 6691672, LSource = 35103422, LCompressed = 1436979 } [McuMovementClient.cs@491] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634080. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.5216115. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67412984, XYCompressed = 6691672, LSource = 35103422, LCompressed = 1436979 } [McuMovementClient.cs@491] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.5326801. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67412984, XYCompressed = 6691672, LSource = 35103422, LCompressed = 1436979 } [McuMovementClient.cs@491] +06/28/2026 03:36:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4108.832198813723, PrevLayerFillRatio=0.42373010952563755: Z1=105.15514661446801, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37626.69484072923, Z2 = 38150 } } [LayerClient.cs@969] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6006573936761 (6006573936761 @ 0) for mcu = 50040.992510 [27/06/2026 01:00:56] (50054.78280634167 sec) to 6009484309772 (from now=6009364309772, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6006573936761 (6006573936761 @ 0) for mcu = 50040.992510 [27/06/2026 01:00:56] (50054.78280634167 sec) to 6009484309772 (from external timestamp, flags=None, requested=6009484309772 (6009484309772 @ 0) for mcu = 50065.246144 [27/06/2026 01:01:21] (50079.03591476667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6006573936761 (6006573936761 @ 0) for mcu = 50040.992510 [27/06/2026 01:00:56] (50054.78280634167 sec) to 6009484309772 (from external timestamp, flags=None, requested=6009484309772 (6009484309772 @ 0) for mcu = 50065.246144 [27/06/2026 01:01:21] (50079.03591476667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:36:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:36:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.1197079 ~ 5.92 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:36:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0759766. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:45.7101111. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67412984, XYCompressed = 6691672, LSource = 35103422, LCompressed = 1436979 } [McuMovementClient.cs@491] +06/28/2026 03:36:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:36:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:36:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:36:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 336, Weight=LayerWeight { Index = 336, FillTotalRelative = 0.18315241742866797, FillMaxRelative = 0.4267319353998782, TimeFromPreview = 35.50712045987969, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:36:40 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6011065886004, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:36:40 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6011185894610, flushed existing data. Was Timestamp=0, Now=6011065897112, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:36:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:36:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6009350491510 (6009350491510 @ 0) for mcu = 50064.130923 [27/06/2026 01:01:20] (50077.92076258334 sec) to 6011185952781 (from now=6011065952781, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:36:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6009350515519 (1538393731973107 @ 8) for mcu = 50064.131123 [27/06/2026 01:01:20] (50077.92096266624 sec) to 6011185952781 (from now=6011065952781, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:36:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6009350515506 (1538393731969705 @ 8) for mcu = 50064.131123 [27/06/2026 01:01:20] (50077.9209625555 sec) to 6011185952781 (from now=6011065952781, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:36:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:36:41 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:36:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.1272413. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.1272413. Loops = 77. GC duration = 00:00:00.3643810. SinceCollect=00:01:09.1020852. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67572100, XYCompressed = 6701935, LSource = 35185058, LCompressed = 1439669 } [McuMovementClient.cs@478] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=125944, gen1=31795, gen2=913, LatencyMode=Interactive, FreeMemory=5705891840, Live=358971600, HeapSizeBytes=368506768, FragmentedBytes=10133360, TotalCommittedBytes=378732544, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:37:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 336 [PrintingService.cs@2118] +06/28/2026 03:37:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (101 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0136915. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67572100, XYCompressed = 6701935, LSource = 35185058, LCompressed = 1439669 } [McuMovementClient.cs@491] +06/28/2026 03:37:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 337, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.82220978793419, Elapsed = 07:02:39.9692703, TimeTotal = 11:46:32.2308457, Remaining = 04:43:52.2615754, Incomplete = False, SoftCount = 566, LayerPrintDone = 337, WeightsDone = 337, WeightDone = 02:30:34.5696875, WeightTotal = 03:37:45.2226899, WeightTotalEstimate = 03:37:45.2226900, LayerRecoatElapsed = 02:17:26.2237941, LayerRecoatDelays = 00:23:06, LayerRecoatPrintLayersElapsed = 01:34:25.2295008, LayerRecoatNoDelayAverage = 00:00:14.8489693, StreamingElapsed = 02:26:13.2529526, ObjectLayerOverheadAverageDuration = 00:00:00.0221305, TimeLayers = 07:03:25.9667089, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:12.0883481, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.3660090, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7345395, JobElapsed = 04:00:45.9343195, JobTotal = 06:20:17.8661604, WeightEstimate = 01:07:10.6530025 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:53. coolingEstimate=02:28:12.0883481 [PrintingService.cs@1912] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.82220978793419;StartedAtUtc;07:02:39.9692703;11:46:32.2308457;04:43:52.2615754;False;566;337;337;02:30:34.5696875;03:37:45.2226899;03:37:45.2226900;02:17:26.2237941;00:23:06;01:34:25.2295008;00:00:14.8489693;02:26:13.2529526;00:00:00.0221305;07:03:25.9667089;00:00:00;02:28:12.0883481;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.3660090;00:00:00;00:04:27.7345395;04:00:45.9343195;06:20:17.8661604 [PrintingService.cs@1918] +06/28/2026 03:37:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 336. PreviewWeight=LayerWeight { Index = 336, FillTotalRelative = 0.18315241742866797, FillMaxRelative = 0.4267319353998782, TimeFromPreview = 35.50712045987969, EnergyDensityIncreaseFactor = 0 }, FillArea=20143.260332649996, PreviewFillRatio=0.4267319353998782, Results=4, StreamingSeconds (preview) = 35.50712045987969, StreamingSeconds (extrapolated) = 36.40489393120404, StreamingSeconds (no overhead) = 20.3907623 (02:26:13.2529526), LayerElapsedSeconds=34.6733693, LayerStreamStats=StreamStats { EdgeCount = 78494, OnTraceLength = 15287.258487194777, AllTraceLength = 20463.219455368817 }, TotalStreamStats=StreamStats { EdgeCount = 32836166, OnTraceLength = 6304137.236320579, AllTraceLength = 14426244.557438793 } [PrintingService.cs@2147] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 337, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.822214830838874, Elapsed = 07:02:39.9632718, TimeTotal = 11:46:32.2172449, Remaining = 04:43:52.2539731, Incomplete = False, SoftCount = 566, LayerPrintDone = 337, WeightsDone = 337, WeightDone = 02:30:34.5636890, WeightTotal = 03:37:45.2126152, WeightTotalEstimate = 03:37:45.2126152, LayerRecoatElapsed = 02:17:26.2237941, LayerRecoatDelays = 00:23:06, LayerRecoatPrintLayersElapsed = 01:34:25.2295008, LayerRecoatNoDelayAverage = 00:00:14.8489693, StreamingElapsed = 02:26:13.2529526, ObjectLayerOverheadAverageDuration = 00:00:00.0221127, TimeLayers = 07:03:25.9566342, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:12.0848220, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:40.3660090, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.7345395, JobElapsed = 04:00:45.9365441, JobTotal = 06:20:17.8560857, WeightEstimate = 01:07:10.6489262 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:53. coolingEstimate=02:28:12.0848220 [PrintingService.cs@1912] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.822214830838874;StartedAtUtc;07:02:39.9632718;11:46:32.2172449;04:43:52.2539731;False;566;337;337;02:30:34.5636890;03:37:45.2126152;03:37:45.2126152;02:17:26.2237941;00:23:06;01:34:25.2295008;00:00:14.8489693;02:26:13.2529526;00:00:00.0221127;07:03:25.9566342;00:00:00;02:28:12.0848220;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:40.3660090;00:00:00;00:04:27.7345395;04:00:45.9365441;06:20:17.8560857 [PrintingService.cs@1918] +06/28/2026 03:37:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 337. PrevPreviewWeight=LayerWeight { Index = 336, FillTotalRelative = 0.18315241742866797, FillMaxRelative = 0.4267319353998782, TimeFromPreview = 35.50712045987969, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4267319353998782, PreviewWeight=LayerWeight { Index = 337, FillTotalRelative = 0.18257862289453922, FillMaxRelative = 0.4240083817921777, TimeFromPreview = 36.58154621886909, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0575092. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67572100, XYCompressed = 6701935, LSource = 35185058, LCompressed = 1439669 } [McuMovementClient.cs@491] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631705. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1230971. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67572100, XYCompressed = 6701935, LSource = 35185058, LCompressed = 1439669 } [McuMovementClient.cs@491] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1346671. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67572100, XYCompressed = 6701935, LSource = 35185058, LCompressed = 1439669 } [McuMovementClient.cs@491] +06/28/2026 03:37:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4113.697986345857, PrevLayerFillRatio=0.4267319353998782: Z1=105.27967411439467, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37731.97451484363, Z2 = 38250 } } [LayerClient.cs@969] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6010704063421 (6010704063421 @ 0) for mcu = 50075.410961 [27/06/2026 01:01:31] (50089.200528508336 sec) to 6013648717932 (from now=6013528717932, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6010704063421 (6010704063421 @ 0) for mcu = 50075.410961 [27/06/2026 01:01:31] (50089.200528508336 sec) to 6013648717932 (from external timestamp, flags=None, requested=6013648717932 (6013648717932 @ 0) for mcu = 50099.950277 [27/06/2026 01:01:55] (50113.7393161 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6010704063421 (6010704063421 @ 0) for mcu = 50075.410961 [27/06/2026 01:01:31] (50089.200528508336 sec) to 6013648717932 (from external timestamp, flags=None, requested=6013648717932 (6013648717932 @ 0) for mcu = 50099.950277 [27/06/2026 01:01:55] (50113.7393161 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:37:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0826142. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3088770. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67572100, XYCompressed = 6701935, LSource = 35185058, LCompressed = 1439669 } [McuMovementClient.cs@491] +06/28/2026 03:37:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:37:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 03:37:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 03:37:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 03:37:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 03:37:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 03:37:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 03:37:18 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:37:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:37:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 337, Weight=LayerWeight { Index = 337, FillTotalRelative = 0.18257862289453922, FillMaxRelative = 0.4240083817921777, TimeFromPreview = 36.58154621886909, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:37:21 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6016044975242, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:37:21 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6016164980061, flushed existing data. Was Timestamp=0, Now=6016044982653, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:37:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:37:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6013467251542 (6013467251542 @ 0) for mcu = 50098.438024 [27/06/2026 01:01:54] (50112.227096183335 sec) to 6016165029944 (from now=6016045029944, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:37:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6013467275549 (1539447622540601 @ 8) for mcu = 50098.438224 [27/06/2026 01:01:54] (50112.22729624352 sec) to 6016165029944 (from now=6016045029944, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:37:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6013467275533 (1539447622536612 @ 8) for mcu = 50098.438224 [27/06/2026 01:01:54] (50112.22729611367 sec) to 6016165029944 (from now=6016045029944, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:37:22 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:37:23 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:37:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1400690 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.7500000. Loops = 75. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.1369035. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67785324, XYCompressed = 6721133, LSource = 35294139, LCompressed = 1442582 } [McuMovementClient.cs@491] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:37:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 337 [PrintingService.cs@2118] +06/28/2026 03:37:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.1536130. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67785324, XYCompressed = 6721133, LSource = 35294139, LCompressed = 1442582 } [McuMovementClient.cs@491] +06/28/2026 03:37:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 338, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.9430433228178, Elapsed = 07:03:21.1061034, TimeTotal = 11:46:15.4028747, Remaining = 04:42:54.2967713, Incomplete = False, SoftCount = 566, LayerPrintDone = 338, WeightsDone = 338, WeightDone = 02:30:54.6270027, WeightTotal = 03:37:26.9244074, WeightTotalEstimate = 03:37:26.9244074, LayerRecoatElapsed = 02:17:47.3033120, LayerRecoatDelays = 00:23:09, LayerRecoatPrintLayersElapsed = 01:34:46.3090187, LayerRecoatNoDelayAverage = 00:00:14.8559467, StreamingElapsed = 02:26:33.2941536, ObjectLayerOverheadAverageDuration = 00:00:00.0221127, TimeLayers = 07:03:13.5015452, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:07.7255408, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.2730710, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8392005, JobElapsed = 04:01:27.0739975, JobTotal = 06:20:04.3892737, WeightEstimate = 01:06:32.2974047 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:36. coolingEstimate=02:28:07.7255408 [PrintingService.cs@1912] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.9430433228178;StartedAtUtc;07:03:21.1061034;11:46:15.4028747;04:42:54.2967713;False;566;338;338;02:30:54.6270027;03:37:26.9244074;03:37:26.9244074;02:17:47.3033120;00:23:09;01:34:46.3090187;00:00:14.8559467;02:26:33.2941536;00:00:00.0221127;07:03:13.5015452;00:00:00;02:28:07.7255408;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.2730710;00:00:00;00:04:27.8392005;04:01:27.0739975;06:20:04.3892737 [PrintingService.cs@1918] +06/28/2026 03:37:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 337. PreviewWeight=LayerWeight { Index = 337, FillTotalRelative = 0.18257862289453922, FillMaxRelative = 0.4240083817921777, TimeFromPreview = 36.58154621886909, EnergyDensityIncreaseFactor = 0 }, FillArea=19452.726701676664, PreviewFillRatio=0.4240083817921777, Results=4, StreamingSeconds (preview) = 36.58154621886909, StreamingSeconds (extrapolated) = 37.329408736305666, StreamingSeconds (no overhead) = 20.041201 (02:26:33.2941536), LayerElapsedSeconds=41.1358626, LayerStreamStats=StreamStats { EdgeCount = 105423, OnTraceLength = 20622.94463261962, AllTraceLength = 26399.359591290355 }, TotalStreamStats=StreamStats { EdgeCount = 32941589, OnTraceLength = 6324760.180953199, AllTraceLength = 14452643.917030083 } [PrintingService.cs@2147] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 338, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 59.94304590030317, Elapsed = 07:03:21.1030276, TimeTotal = 11:46:15.3959214, Remaining = 04:42:54.2928938, Incomplete = False, SoftCount = 566, LayerPrintDone = 338, WeightsDone = 338, WeightDone = 02:30:54.6239269, WeightTotal = 03:37:26.9192568, WeightTotalEstimate = 03:37:26.9192568, LayerRecoatElapsed = 02:17:47.3033120, LayerRecoatDelays = 00:23:09, LayerRecoatPrintLayersElapsed = 01:34:46.3090187, LayerRecoatNoDelayAverage = 00:00:14.8559467, StreamingElapsed = 02:26:33.2941536, ObjectLayerOverheadAverageDuration = 00:00:00.0221036, TimeLayers = 07:03:13.4963946, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:07.7237381, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:41.2730710, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:27.8392005, JobElapsed = 04:01:27.0752599, JobTotal = 06:20:04.3841231, WeightEstimate = 01:06:32.2953299 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:36. coolingEstimate=02:28:07.7237381 [PrintingService.cs@1912] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 59.94304590030317;StartedAtUtc;07:03:21.1030276;11:46:15.3959214;04:42:54.2928938;False;566;338;338;02:30:54.6239269;03:37:26.9192568;03:37:26.9192568;02:17:47.3033120;00:23:09;01:34:46.3090187;00:00:14.8559467;02:26:33.2941536;00:00:00.0221036;07:03:13.4963946;00:00:00;02:28:07.7237381;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:41.2730710;00:00:00;00:04:27.8392005;04:01:27.0752599;06:20:04.3841231 [PrintingService.cs@1918] +06/28/2026 03:37:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 338. PrevPreviewWeight=LayerWeight { Index = 337, FillTotalRelative = 0.18257862289453922, FillMaxRelative = 0.4240083817921777, TimeFromPreview = 36.58154621886909, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4240083817921777, PreviewWeight=LayerWeight { Index = 338, FillTotalRelative = 0.18302234809293957, FillMaxRelative = 0.4270156367484086, TimeFromPreview = 35.795847594911336, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.1665946. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67785324, XYCompressed = 6721133, LSource = 35294139, LCompressed = 1442582 } [McuMovementClient.cs@491] +06/28/2026 03:37:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632963. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.2320659. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67785324, XYCompressed = 6721133, LSource = 35294139, LCompressed = 1442582 } [McuMovementClient.cs@491] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.2413111. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67785324, XYCompressed = 6721133, LSource = 35294139, LCompressed = 1442582 } [McuMovementClient.cs@491] +06/28/2026 03:37:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4109.283262193744, PrevLayerFillRatio=0.4240083817921777: Z1=105.16669043849477, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37837.141205282125, Z2 = 38350 } } [LayerClient.cs@969] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6014868425471 (6014868425471 @ 0) for mcu = 50110.114742 [27/06/2026 01:02:06] (50123.90354559167 sec) to 6018581416837 (from now=6018461416837, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6014868425471 (6014868425471 @ 0) for mcu = 50110.114742 [27/06/2026 01:02:06] (50123.90354559167 sec) to 6018581416837 (from external timestamp, flags=None, requested=6018581416837 (6018581416837 @ 0) for mcu = 50141.057022 [27/06/2026 01:02:37] (50154.84514030833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6014868425471 (6014868425471 @ 0) for mcu = 50110.114742 [27/06/2026 01:02:06] (50123.90354559167 sec) to 6018581416837 (from external timestamp, flags=None, requested=6018581416837 (6018581416837 @ 0) for mcu = 50141.057022 [27/06/2026 01:02:37] (50154.84514030833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:37:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:37:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0777403. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.4175256. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67785324, XYCompressed = 6721133, LSource = 35294139, LCompressed = 1442582 } [McuMovementClient.cs@491] +06/28/2026 03:37:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:38:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134 [HeaterCheck.cs@111] +06/28/2026 03:38:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:38:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:38:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 338, Weight=LayerWeight { Index = 338, FillTotalRelative = 0.18302234809293957, FillMaxRelative = 0.4270156367484086, TimeFromPreview = 35.795847594911336, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:38:09 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6021743035953, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:38:09 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6021863044822, flushed existing data. Was Timestamp=0, Now=6021743047280, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:38:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:38:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6018447709263 (6018447709263 @ 0) for mcu = 50139.942686 [27/06/2026 01:02:35] (50153.730910525 sec) to 6021863105917 (from now=6021743105917, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:38:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6018447733233 (1540722619707717 @ 8) for mcu = 50139.942885 [27/06/2026 01:02:35] (50153.731110277244 sec) to 6021863105917 (from now=6021743105917, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:38:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6018447733248 (1540722619711735 @ 8) for mcu = 50139.942886 [27/06/2026 01:02:35] (50153.73111040804 sec) to 6021863105917 (from now=6021743105917, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:38:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (166 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:38:09 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:38:10 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:38:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:38:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0649755 ~ 6.03 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.0324904. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.0324904. Loops = 77. GC duration = 00:00:00.3723609. SinceCollect=00:01:28.9599654. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67944388, XYCompressed = 6731219, LSource = 35375802, LCompressed = 1445158 } [McuMovementClient.cs@478] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=126174, gen1=31925, gen2=914, LatencyMode=Interactive, FreeMemory=5704630272, Live=356245376, HeapSizeBytes=372025440, FragmentedBytes=16429384, TotalCommittedBytes=382173184, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:38:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 338 [PrintingService.cs@2118] +06/28/2026 03:38:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0126385. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67944388, XYCompressed = 6731219, LSource = 35375802, LCompressed = 1445158 } [McuMovementClient.cs@491] +06/28/2026 03:38:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 339, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.05598420184429, Elapsed = 07:04:08.9315317, TimeTotal = 11:46:15.3467201, Remaining = 04:42:06.4151884, Incomplete = False, SoftCount = 566, LayerPrintDone = 339, WeightsDone = 339, WeightDone = 02:31:15.0222611, WeightTotal = 03:37:09.6327029, WeightTotalEstimate = 03:37:09.6327029, LayerRecoatElapsed = 02:18:14.7334819, LayerRecoatDelays = 00:23:12, LayerRecoatPrintLayersElapsed = 01:35:13.7391887, LayerRecoatNoDelayAverage = 00:00:14.8765808, StreamingElapsed = 02:26:53.6703842, ObjectLayerOverheadAverageDuration = 00:00:00.0221036, TimeLayers = 07:03:13.4599492, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:07.7109822, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.9555040, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.1487120, JobElapsed = 04:02:14.8937847, JobTotal = 06:20:01.3557332, WeightEstimate = 01:05:54.6104418 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:36. coolingEstimate=02:28:07.7109822 [PrintingService.cs@1912] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.05598420184429;StartedAtUtc;07:04:08.9315317;11:46:15.3467201;04:42:06.4151884;False;566;339;339;02:31:15.0222611;03:37:09.6327029;03:37:09.6327029;02:18:14.7334819;00:23:12;01:35:13.7391887;00:00:14.8765808;02:26:53.6703842;00:00:00.0221036;07:03:13.4599492;00:00:00;02:28:07.7109822;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.9555040;00:00:00;00:04:28.1487120;04:02:14.8937847;06:20:01.3557332 [PrintingService.cs@1918] +06/28/2026 03:38:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 338. PreviewWeight=LayerWeight { Index = 338, FillTotalRelative = 0.18302234809293957, FillMaxRelative = 0.4270156367484086, TimeFromPreview = 35.795847594911336, EnergyDensityIncreaseFactor = 0 }, FillArea=17967.7415692027, PreviewFillRatio=0.4270156367484086, Results=4, StreamingSeconds (preview) = 35.795847594911336, StreamingSeconds (extrapolated) = 36.66278454906541, StreamingSeconds (no overhead) = 20.3762306 (02:26:53.6703842), LayerElapsedSeconds=47.8185026, LayerStreamStats=StreamStats { EdgeCount = 78521, OnTraceLength = 15288.427059307694, AllTraceLength = 20510.278792127967 }, TotalStreamStats=StreamStats { EdgeCount = 33020110, OnTraceLength = 6340048.608012507, AllTraceLength = 14473154.195822211 } [PrintingService.cs@2147] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 339, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.05599152936166, Elapsed = 07:04:08.9227515, TimeTotal = 11:46:15.3269298, Remaining = 04:42:06.4041783, Incomplete = False, SoftCount = 566, LayerPrintDone = 339, WeightsDone = 339, WeightDone = 02:31:15.0134809, WeightTotal = 03:37:09.6180434, WeightTotalEstimate = 03:37:09.6180435, LayerRecoatElapsed = 02:18:14.7334819, LayerRecoatDelays = 00:23:12, LayerRecoatPrintLayersElapsed = 01:35:13.7391887, LayerRecoatNoDelayAverage = 00:00:14.8765808, StreamingElapsed = 02:26:53.6703842, ObjectLayerOverheadAverageDuration = 00:00:00.0220777, TimeLayers = 07:03:13.4452897, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:07.7058514, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:43.9555040, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.1487120, JobElapsed = 04:02:14.8990981, JobTotal = 06:20:01.3410737, WeightEstimate = 01:05:54.6045626 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:36. coolingEstimate=02:28:07.7058514 [PrintingService.cs@1912] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.05599152936166;StartedAtUtc;07:04:08.9227515;11:46:15.3269298;04:42:06.4041783;False;566;339;339;02:31:15.0134809;03:37:09.6180434;03:37:09.6180435;02:18:14.7334819;00:23:12;01:35:13.7391887;00:00:14.8765808;02:26:53.6703842;00:00:00.0220777;07:03:13.4452897;00:00:00;02:28:07.7058514;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:43.9555040;00:00:00;00:04:28.1487120;04:02:14.8990981;06:20:01.3410737 [PrintingService.cs@1918] +06/28/2026 03:38:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 339. PrevPreviewWeight=LayerWeight { Index = 338, FillTotalRelative = 0.18302234809293957, FillMaxRelative = 0.4270156367484086, TimeFromPreview = 35.795847594911336, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4270156367484086, PreviewWeight=LayerWeight { Index = 339, FillTotalRelative = 0.1824439296230071, FillMaxRelative = 0.42429832550685653, TimeFromPreview = 36.47706689146509, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0495118. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67944388, XYCompressed = 6731219, LSource = 35375802, LCompressed = 1445158 } [McuMovementClient.cs@491] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631836. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1137821. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67944388, XYCompressed = 6731219, LSource = 35375802, LCompressed = 1445158 } [McuMovementClient.cs@491] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1258570. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67944388, XYCompressed = 6731219, LSource = 35375802, LCompressed = 1445158 } [McuMovementClient.cs@491] +06/28/2026 03:38:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4114.157849956326, PrevLayerFillRatio=0.4270156367484086: Z1=105.29144315801622, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 37942.43264844014, Z2 = 38450 } } [LayerClient.cs@969] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6019801131032 (6019801131032 @ 0) for mcu = 50151.221459 [27/06/2026 01:02:47] (50165.00942526667 sec) to 6024322821840 (from now=6024202821840, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6019801131032 (6019801131032 @ 0) for mcu = 50151.221459 [27/06/2026 01:02:47] (50165.00942526667 sec) to 6024322821840 (from external timestamp, flags=None, requested=6024322821840 (6024322821840 @ 0) for mcu = 50188.903027 [27/06/2026 01:03:24] (50202.690182 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6019801131032 (6019801131032 @ 0) for mcu = 50151.221459 [27/06/2026 01:02:47] (50165.00942526667 sec) to 6024322821840 (from external timestamp, flags=None, requested=6024322821840 (6024322821840 @ 0) for mcu = 50188.903027 [27/06/2026 01:03:24] (50202.690182 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:38:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:38:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0804828. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3039662. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 67944388, XYCompressed = 6731219, LSource = 35375802, LCompressed = 1445158 } [McuMovementClient.cs@491] +06/28/2026 03:38:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:38:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:38:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:38:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 339, Weight=LayerWeight { Index = 339, FillTotalRelative = 0.1824439296230071, FillMaxRelative = 0.42429832550685653, TimeFromPreview = 36.47706689146509, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:38:51 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6026765508735, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:38:51 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6026885527114, flushed existing data. Was Timestamp=0, Now=6026765529635, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:38:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:38:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6024140975659 (6024140975659 @ 0) for mcu = 50187.387581 [27/06/2026 01:03:23] (50201.17479715833 sec) to 6026885564741 (from now=6026765564741, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:38:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6024140999660 (1542180095913165 @ 8) for mcu = 50187.387781 [27/06/2026 01:03:23] (50201.17499717334 sec) to 6026885564741 (from now=6026765564741, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:38:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6024140999629 (1542180095905041 @ 8) for mcu = 50187.387781 [27/06/2026 01:03:23] (50201.174996908885 sec) to 6026885564741 (from now=6026765564741, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:38:51 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:38:52 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:38:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.7436688. Loops = 75. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.5827869. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68157682, XYCompressed = 6750640, LSource = 35484885, LCompressed = 1448083 } [McuMovementClient.cs@491] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:39:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 339 [PrintingService.cs@2118] +06/28/2026 03:39:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.5932210. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68157682, XYCompressed = 6750640, LSource = 35484885, LCompressed = 1448083 } [McuMovementClient.cs@491] +06/28/2026 03:39:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 340, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.176619547482055, Elapsed = 07:04:50.5037925, TimeTotal = 11:45:59.4811144, Remaining = 04:41:08.9773219, Incomplete = False, SoftCount = 566, LayerPrintDone = 340, WeightsDone = 340, WeightDone = 02:31:35.1431595, WeightTotal = 03:36:51.4534841, WeightTotalEstimate = 03:36:51.4534842, LayerRecoatElapsed = 02:18:36.1848443, LayerRecoatDelays = 00:23:15, LayerRecoatPrintLayersElapsed = 01:35:35.1905511, LayerRecoatNoDelayAverage = 00:00:14.8842685, StreamingElapsed = 02:27:13.7779851, ObjectLayerOverheadAverageDuration = 00:00:00.0220777, TimeLayers = 07:03:01.7076487, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:03.5976770, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:44.9549050, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2640275, JobElapsed = 04:02:56.4750447, JobTotal = 06:19:48.4887162, WeightEstimate = 01:05:16.3103247 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:20. coolingEstimate=02:28:03.5976770 [PrintingService.cs@1912] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.176619547482055;StartedAtUtc;07:04:50.5037925;11:45:59.4811144;04:41:08.9773219;False;566;340;340;02:31:35.1431595;03:36:51.4534841;03:36:51.4534842;02:18:36.1848443;00:23:15;01:35:35.1905511;00:00:14.8842685;02:27:13.7779851;00:00:00.0220777;07:03:01.7076487;00:00:00;02:28:03.5976770;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:44.9549050;00:00:00;00:04:28.2640275;04:02:56.4750447;06:19:48.4887162 [PrintingService.cs@1918] +06/28/2026 03:39:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 339. PreviewWeight=LayerWeight { Index = 339, FillTotalRelative = 0.1824439296230071, FillMaxRelative = 0.42429832550685653, TimeFromPreview = 36.47706689146509, EnergyDensityIncreaseFactor = 0 }, FillArea=20286.61194483595, PreviewFillRatio=0.42429832550685653, Results=4, StreamingSeconds (preview) = 36.47706689146509, StreamingSeconds (extrapolated) = 37.27216023750164, StreamingSeconds (no overhead) = 20.1076009 (02:27:13.7779851), LayerElapsedSeconds=41.5750784, LayerStreamStats=StreamStats { EdgeCount = 105425, OnTraceLength = 20621.784630671144, AllTraceLength = 26639.760498061776 }, TotalStreamStats=StreamStats { EdgeCount = 33125535, OnTraceLength = 6360670.392643178, AllTraceLength = 14499793.956320273 } [PrintingService.cs@2147] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 340, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.17661937781526, Elapsed = 07:04:50.5039966, TimeTotal = 11:45:59.4815730, Remaining = 04:41:08.9775764, Incomplete = False, SoftCount = 566, LayerPrintDone = 340, WeightsDone = 340, WeightDone = 02:31:35.1433636, WeightTotal = 03:36:51.4538238, WeightTotalEstimate = 03:36:51.4538238, LayerRecoatElapsed = 02:18:36.1848443, LayerRecoatDelays = 00:23:15, LayerRecoatPrintLayersElapsed = 01:35:35.1905511, LayerRecoatNoDelayAverage = 00:00:14.8842685, StreamingElapsed = 02:27:13.7779851, ObjectLayerOverheadAverageDuration = 00:00:00.0220783, TimeLayers = 07:03:01.7079884, CoolingElapsed = 00:00:00, CoolingEstimate = 02:28:03.5977959, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:44.9549050, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2640275, JobElapsed = 04:02:56.4766655, JobTotal = 06:19:48.4890559, WeightEstimate = 01:05:16.3104602 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:20:20. coolingEstimate=02:28:03.5977959 [PrintingService.cs@1912] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.17661937781526;StartedAtUtc;07:04:50.5039966;11:45:59.4815730;04:41:08.9775764;False;566;340;340;02:31:35.1433636;03:36:51.4538238;03:36:51.4538238;02:18:36.1848443;00:23:15;01:35:35.1905511;00:00:14.8842685;02:27:13.7779851;00:00:00.0220783;07:03:01.7079884;00:00:00;02:28:03.5977959;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:44.9549050;00:00:00;00:04:28.2640275;04:02:56.4766655;06:19:48.4890559 [PrintingService.cs@1918] +06/28/2026 03:39:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 340. PrevPreviewWeight=LayerWeight { Index = 339, FillTotalRelative = 0.1824439296230071, FillMaxRelative = 0.42429832550685653, TimeFromPreview = 36.47706689146509, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42429832550685653, PreviewWeight=LayerWeight { Index = 340, FillTotalRelative = 0.18292011800384655, FillMaxRelative = 0.4271476455741253, TimeFromPreview = 35.46567050815064, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.6095523. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68157682, XYCompressed = 6750640, LSource = 35484885, LCompressed = 1448083 } [McuMovementClient.cs@491] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634259. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.6730224. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68157682, XYCompressed = 6750640, LSource = 35484885, LCompressed = 1448083 } [McuMovementClient.cs@491] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.6846865. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68157682, XYCompressed = 6750640, LSource = 35484885, LCompressed = 1448083 } [McuMovementClient.cs@491] +06/28/2026 03:39:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4109.753244321626, PrevLayerFillRatio=0.42429832550685653: Z1=105.1787184399249, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38047.61136688006, Z2 = 38550 } } [LayerClient.cs@969] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6025542502523 (6025542502523 @ 0) for mcu = 50199.067240 [27/06/2026 01:03:35] (50212.854187691664 sec) to 6029309773107 (from now=6029189773107, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6025542502523 (6025542502523 @ 0) for mcu = 50199.067240 [27/06/2026 01:03:35] (50212.854187691664 sec) to 6029309773107 (from external timestamp, flags=None, requested=6029309773107 (6029309773107 @ 0) for mcu = 50230.461840 [27/06/2026 01:04:06] (50244.248109225 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6025542502523 (6025542502523 @ 0) for mcu = 50199.067240 [27/06/2026 01:03:35] (50212.854187691664 sec) to 6029309773107 (from external timestamp, flags=None, requested=6029309773107 (6029309773107 @ 0) for mcu = 50230.461840 [27/06/2026 01:04:06] (50244.248109225 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:39:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0714504. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.8633537. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68157682, XYCompressed = 6750640, LSource = 35484885, LCompressed = 1448083 } [McuMovementClient.cs@491] +06/28/2026 03:39:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:39:27 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:39:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0683107 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:39:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:39:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 340, Weight=LayerWeight { Index = 340, FillTotalRelative = 0.18292011800384655, FillMaxRelative = 0.4271476455741253, TimeFromPreview = 35.46567050815064, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:39:30 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6031422061569, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:39:30 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6031542068067, flushed existing data. Was Timestamp=0, Now=6031422070462, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6029176020232 (6029176020232 @ 0) for mcu = 50229.347127 [27/06/2026 01:04:05] (50243.133501933335 sec) to 6031542222940 (from now=6031422222940, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6029176044232 (1543469067323628 @ 8) for mcu = 50229.347327 [27/06/2026 01:04:05] (50243.13370194101 sec) to 6031542222940 (from now=6031422222940, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6029176044228 (1543469067322558 @ 8) for mcu = 50229.347327 [27/06/2026 01:04:05] (50243.13370190618 sec) to 6031542222940 (from now=6031422222940, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (21 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:39:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.0662887. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.0662887. Loops = 77. GC duration = 00:00:00.3654996. SinceCollect=00:01:20.6598874. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68316778, XYCompressed = 6760776, LSource = 35566525, LCompressed = 1450721 } [McuMovementClient.cs@478] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=126381, gen1=32031, gen2=915, LatencyMode=Interactive, FreeMemory=5705515008, Live=356799376, HeapSizeBytes=364910416, FragmentedBytes=8521112, TotalCommittedBytes=375619584, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:39:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 340 [PrintingService.cs@2118] +06/28/2026 03:39:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0137575. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68316778, XYCompressed = 6760776, LSource = 35566525, LCompressed = 1450721 } [McuMovementClient.cs@491] +06/28/2026 03:39:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 341, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.29883102520226, Elapsed = 07:05:29.5892196, TimeTotal = 11:45:38.4480023, Remaining = 04:40:08.8587827, Incomplete = False, SoftCount = 566, LayerPrintDone = 341, WeightsDone = 341, WeightDone = 02:31:55.5386884, WeightTotal = 03:36:34.4281152, WeightTotalEstimate = 03:36:34.4281152, LayerRecoatElapsed = 02:18:54.8747425, LayerRecoatDelays = 00:23:18, LayerRecoatPrintLayersElapsed = 01:35:53.8804494, LayerRecoatNoDelayAverage = 00:00:14.8859973, StreamingElapsed = 02:27:34.1512316, ObjectLayerOverheadAverageDuration = 00:00:00.0220783, TimeLayers = 07:02:46.1275656, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:58.1446480, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.1796490, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2899595, JobElapsed = 04:03:35.5600107, JobTotal = 06:19:32.6579571, WeightEstimate = 01:04:38.8894268 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:59. coolingEstimate=02:27:58.1446480 [PrintingService.cs@1912] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.29883102520226;StartedAtUtc;07:05:29.5892196;11:45:38.4480023;04:40:08.8587827;False;566;341;341;02:31:55.5386884;03:36:34.4281152;03:36:34.4281152;02:18:54.8747425;00:23:18;01:35:53.8804494;00:00:14.8859973;02:27:34.1512316;00:00:00.0220783;07:02:46.1275656;00:00:00;02:27:58.1446480;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.1796490;00:00:00;00:04:28.2899595;04:03:35.5600107;06:19:32.6579571 [PrintingService.cs@1918] +06/28/2026 03:39:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 340. PreviewWeight=LayerWeight { Index = 340, FillTotalRelative = 0.18292011800384655, FillMaxRelative = 0.4271476455741253, TimeFromPreview = 35.46567050815064, EnergyDensityIncreaseFactor = 0 }, FillArea=20120.407591581738, PreviewFillRatio=0.4271476455741253, Results=4, StreamingSeconds (preview) = 35.46567050815064, StreamingSeconds (extrapolated) = 36.398955078289504, StreamingSeconds (no overhead) = 20.3732465 (02:27:34.1512316), LayerElapsedSeconds=39.0833889, LayerStreamStats=StreamStats { EdgeCount = 78498, OnTraceLength = 15288.410979166627, AllTraceLength = 20389.394244030118 }, TotalStreamStats=StreamStats { EdgeCount = 33204033, OnTraceLength = 6375958.8036223445, AllTraceLength = 14520183.350564303 } [PrintingService.cs@2147] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 341, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.29883119485997, Elapsed = 07:05:29.5890149, TimeTotal = 11:45:38.4475437, Remaining = 04:40:08.8585288, Incomplete = False, SoftCount = 566, LayerPrintDone = 341, WeightsDone = 341, WeightDone = 02:31:55.5384837, WeightTotal = 03:36:34.4277755, WeightTotalEstimate = 03:36:34.4277756, LayerRecoatElapsed = 02:18:54.8747425, LayerRecoatDelays = 00:23:18, LayerRecoatPrintLayersElapsed = 01:35:53.8804494, LayerRecoatNoDelayAverage = 00:00:14.8859973, StreamingElapsed = 02:27:34.1512316, ObjectLayerOverheadAverageDuration = 00:00:00.0220777, TimeLayers = 07:02:46.1272259, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:58.1445291, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.1796490, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2899595, JobElapsed = 04:03:35.5613313, JobTotal = 06:19:32.6576174, WeightEstimate = 01:04:38.8892919 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:59. coolingEstimate=02:27:58.1445291 [PrintingService.cs@1912] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.29883119485997;StartedAtUtc;07:05:29.5890149;11:45:38.4475437;04:40:08.8585288;False;566;341;341;02:31:55.5384837;03:36:34.4277755;03:36:34.4277756;02:18:54.8747425;00:23:18;01:35:53.8804494;00:00:14.8859973;02:27:34.1512316;00:00:00.0220777;07:02:46.1272259;00:00:00;02:27:58.1445291;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.1796490;00:00:00;00:04:28.2899595;04:03:35.5613313;06:19:32.6576174 [PrintingService.cs@1918] +06/28/2026 03:39:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 341. PrevPreviewWeight=LayerWeight { Index = 340, FillTotalRelative = 0.18292011800384655, FillMaxRelative = 0.4271476455741253, TimeFromPreview = 35.46567050815064, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4271476455741253, PreviewWeight=LayerWeight { Index = 341, FillTotalRelative = 0.1822911081588812, FillMaxRelative = 0.42444336591833565, TimeFromPreview = 36.29900992258629, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0335340. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68316778, XYCompressed = 6760776, LSource = 35566525, LCompressed = 1450721 } [McuMovementClient.cs@491] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632557. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1031302. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68316778, XYCompressed = 6760776, LSource = 35566525, LCompressed = 1450721 } [McuMovementClient.cs@491] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1180180. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68316778, XYCompressed = 6760776, LSource = 35566525, LCompressed = 1450721 } [McuMovementClient.cs@491] +06/28/2026 03:39:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4114.371828689675, PrevLayerFillRatio=0.4271476455741253: Z1=105.2969194013839, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38152.90828628145, Z2 = 38650 } } [LayerClient.cs@969] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6030529526590 (6030529526590 @ 0) for mcu = 50240.626643 [27/06/2026 01:04:16] (50254.412721583336 sec) to 6034000800011 (from now=6033880800011, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6030529526590 (6030529526590 @ 0) for mcu = 50240.626643 [27/06/2026 01:04:16] (50254.412721583336 sec) to 6034000800011 (from external timestamp, flags=None, requested=6034000800011 (6034000800011 @ 0) for mcu = 50269.554537 [27/06/2026 01:04:45] (50283.340000091666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6030529526590 (6030529526590 @ 0) for mcu = 50240.626643 [27/06/2026 01:04:16] (50254.412721583336 sec) to 6034000800011 (from external timestamp, flags=None, requested=6034000800011 (6034000800011 @ 0) for mcu = 50269.554537 [27/06/2026 01:04:45] (50283.340000091666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:40:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0708188. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2925495. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68316778, XYCompressed = 6760776, LSource = 35566525, LCompressed = 1450721 } [McuMovementClient.cs@491] +06/28/2026 03:40:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:40:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:40:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:40:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 341, Weight=LayerWeight { Index = 341, FillTotalRelative = 0.1822911081588812, FillMaxRelative = 0.42444336591833565, TimeFromPreview = 36.29900992258629, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:40:09 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6036168819042, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:40:09 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6036288825745, flushed existing data. Was Timestamp=0, Now=6036168828095, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:40:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:40:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6033820565505 (6033820565505 @ 0) for mcu = 50268.052480 [27/06/2026 01:04:44] (50281.838045875 sec) to 6036289108734 (from now=6036169108734, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:40:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6033820589516 (1544658070916132 @ 8) for mcu = 50268.052680 [27/06/2026 01:04:44] (50281.83824596784 sec) to 6036289108734 (from now=6036169108734, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:40:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6033820589505 (1544658070913444 @ 8) for mcu = 50268.052680 [27/06/2026 01:04:44] (50281.83824588034 sec) to 6036289108734 (from now=6036169108734, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:40:09 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:40:10 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:40:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:40:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1001962 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.8398909. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.2530046. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68530088, XYCompressed = 6779996, LSource = 35675636, LCompressed = 1453606 } [McuMovementClient.cs@491] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:40:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 341 [PrintingService.cs@2118] +06/28/2026 03:40:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.2728830. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68530088, XYCompressed = 6779996, LSource = 35675636, LCompressed = 1453606 } [McuMovementClient.cs@491] +06/28/2026 03:40:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 342, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.39699392565977, Elapsed = 07:06:12.9831218, TimeTotal = 11:45:41.4833415, Remaining = 04:39:28.5002197, Incomplete = False, SoftCount = 566, LayerPrintDone = 342, WeightsDone = 342, WeightDone = 02:32:19.7723783, WeightTotal = 03:36:34.3954831, WeightTotalEstimate = 03:36:34.3954832, LayerRecoatElapsed = 02:19:14.0349548, LayerRecoatDelays = 00:23:21, LayerRecoatPrintLayersElapsed = 01:36:13.0406617, LayerRecoatNoDelayAverage = 00:00:14.8887258, StreamingElapsed = 02:27:54.2294850, ObjectLayerOverheadAverageDuration = 00:00:00.0220777, TimeLayers = 07:02:48.3759650, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:58.9315878, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.5343540, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3308870, JobElapsed = 04:04:14.8161936, JobTotal = 06:19:34.5107240, WeightEstimate = 01:04:14.6231049 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:58. coolingEstimate=02:27:58.9315878 [PrintingService.cs@1912] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.39699392565977;StartedAtUtc;07:06:12.9831218;11:45:41.4833415;04:39:28.5002197;False;566;342;342;02:32:19.7723783;03:36:34.3954831;03:36:34.3954832;02:19:14.0349548;00:23:21;01:36:13.0406617;00:00:14.8887258;02:27:54.2294850;00:00:00.0220777;07:02:48.3759650;00:00:00;02:27:58.9315878;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.5343540;00:00:00;00:04:28.3308870;04:04:14.8161936;06:19:34.5107240 [PrintingService.cs@1918] +06/28/2026 03:40:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 341. PreviewWeight=LayerWeight { Index = 341, FillTotalRelative = 0.1822911081588812, FillMaxRelative = 0.42444336591833565, TimeFromPreview = 36.29900992258629, EnergyDensityIncreaseFactor = 0 }, FillArea=19440.331716100896, PreviewFillRatio=0.42444336591833565, Results=4, StreamingSeconds (preview) = 36.29900992258629, StreamingSeconds (extrapolated) = 23.24410931311281, StreamingSeconds (no overhead) = 20.0782534 (02:27:54.2294850), LayerElapsedSeconds=39.2552087, LayerStreamStats=StreamStats { EdgeCount = 105453, OnTraceLength = 20623.39412985742, AllTraceLength = 26575.47274696827 }, TotalStreamStats=StreamStats { EdgeCount = 33309486, OnTraceLength = 6396582.197752202, AllTraceLength = 14546758.823311271 } [PrintingService.cs@2147] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 342, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.39699705831079, Elapsed = 07:06:12.9793257, TimeTotal = 11:45:41.4748601, Remaining = 04:39:28.4955344, Incomplete = False, SoftCount = 566, LayerPrintDone = 342, WeightsDone = 342, WeightDone = 02:32:19.7685822, WeightTotal = 03:36:34.3892006, WeightTotalEstimate = 03:36:34.3892006, LayerRecoatElapsed = 02:19:14.0349548, LayerRecoatDelays = 00:23:21, LayerRecoatPrintLayersElapsed = 01:36:13.0406617, LayerRecoatNoDelayAverage = 00:00:14.8887258, StreamingElapsed = 02:27:54.2294850, ObjectLayerOverheadAverageDuration = 00:00:00.0220666, TimeLayers = 07:02:48.3696825, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:58.9293889, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.5343540, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3308870, JobElapsed = 04:04:14.8195799, JobTotal = 06:19:34.5044415, WeightEstimate = 01:04:14.6206184 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:58. coolingEstimate=02:27:58.9293889 [PrintingService.cs@1912] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.39699705831079;StartedAtUtc;07:06:12.9793257;11:45:41.4748601;04:39:28.4955344;False;566;342;342;02:32:19.7685822;03:36:34.3892006;03:36:34.3892006;02:19:14.0349548;00:23:21;01:36:13.0406617;00:00:14.8887258;02:27:54.2294850;00:00:00.0220666;07:02:48.3696825;00:00:00;02:27:58.9293889;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.5343540;00:00:00;00:04:28.3308870;04:04:14.8195799;06:19:34.5044415 [PrintingService.cs@1918] +06/28/2026 03:40:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 342. PrevPreviewWeight=LayerWeight { Index = 341, FillTotalRelative = 0.1822911081588812, FillMaxRelative = 0.42444336591833565, TimeFromPreview = 36.29900992258629, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42444336591833565, PreviewWeight=LayerWeight { Index = 342, FillTotalRelative = 0.18267693160038362, FillMaxRelative = 0.4272806966526401, TimeFromPreview = 35.30088334411079, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.2958914. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68530088, XYCompressed = 6779996, LSource = 35675636, LCompressed = 1453606 } [McuMovementClient.cs@491] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632987. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.3615033. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68530088, XYCompressed = 6779996, LSource = 35675636, LCompressed = 1453606 } [McuMovementClient.cs@491] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.3722963. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68530088, XYCompressed = 6779996, LSource = 35675636, LCompressed = 1453606 } [McuMovementClient.cs@491] +06/28/2026 03:40:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4109.988346507893, PrevLayerFillRatio=0.42444336591833565: Z1=105.18473528453428, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38258.09302156598, Z2 = 38750 } } [LayerClient.cs@969] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6035220506716 (6035220506716 @ 0) for mcu = 50279.718905 [27/06/2026 01:04:55] (50293.50422263333 sec) to 6038711225999 (from now=6038591225999, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6035220506716 (6035220506716 @ 0) for mcu = 50279.718905 [27/06/2026 01:04:55] (50293.50422263333 sec) to 6038711225999 (from external timestamp, flags=None, requested=6038711225999 (6038711225999 @ 0) for mcu = 50308.808820 [27/06/2026 01:05:24] (50322.59354999167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6035220506716 (6035220506716 @ 0) for mcu = 50279.718905 [27/06/2026 01:04:55] (50293.50422263333 sec) to 6038711225999 (from external timestamp, flags=None, requested=6038711225999 (6038711225999 @ 0) for mcu = 50308.808820 [27/06/2026 01:05:24] (50322.59354999167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:40:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:40:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0733014. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:50.5484841. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68530088, XYCompressed = 6779996, LSource = 35675636, LCompressed = 1453606 } [McuMovementClient.cs@491] +06/28/2026 03:40:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:40:45 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:40:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:40:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 342, Weight=LayerWeight { Index = 342, FillTotalRelative = 0.18267693160038362, FillMaxRelative = 0.4272806966526401, TimeFromPreview = 35.30088334411079, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:40:48 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6040794752714, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:40:48 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6040914758881, flushed existing data. Was Timestamp=0, Now=6040794761323, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6038575632325 (6038575632325 @ 0) for mcu = 50307.678861 [27/06/2026 01:05:23] (50321.46360270833 sec) to 6040914849862 (from now=6040794849862, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6038575656305 (1545875368014123 @ 8) for mcu = 50307.679060 [27/06/2026 01:05:23] (50321.46380254307 sec) to 6040914849862 (from now=6040794849862, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6038575656319 (1545875368017681 @ 8) for mcu = 50307.679060 [27/06/2026 01:05:23] (50321.46380265889 sec) to 6040914849862 (from now=6040794849862, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (101 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:40:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.2306805. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.2306805. Loops = 77. GC duration = 00:00:00.3530902. SinceCollect=00:01:18.1116503. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68689154, XYCompressed = 6790060, LSource = 35757279, LCompressed = 1456137 } [McuMovementClient.cs@478] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=126584, gen1=32146, gen2=916, LatencyMode=Interactive, FreeMemory=5701779456, Live=355714808, HeapSizeBytes=366629896, FragmentedBytes=11289760, TotalCommittedBytes=375881728, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:41:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 342 [PrintingService.cs@2118] +06/28/2026 03:41:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0125537. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68689154, XYCompressed = 6790060, LSource = 35757279, LCompressed = 1456137 } [McuMovementClient.cs@491] +06/28/2026 03:41:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 343, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.520364212653774, Elapsed = 07:06:51.8314832, TimeTotal = 11:45:19.3611215, Remaining = 04:38:27.5296383, Incomplete = False, SoftCount = 566, LayerPrintDone = 343, WeightsDone = 343, WeightDone = 02:32:40.1688494, WeightTotal = 03:36:17.0026378, WeightTotalEstimate = 03:36:17.0026378, LayerRecoatElapsed = 02:19:32.4868451, LayerRecoatDelays = 00:23:24, LayerRecoatPrintLayersElapsed = 01:36:31.4925520, LayerRecoatNoDelayAverage = 00:00:14.8899292, StreamingElapsed = 02:28:14.6076856, ObjectLayerOverheadAverageDuration = 00:00:00.0220666, TimeLayers = 07:02:31.9891354, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:53.1961974, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.6907960, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3489380, JobElapsed = 04:04:53.6664561, JobTotal = 06:19:17.9494014, WeightEstimate = 01:03:36.8337884 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:36. coolingEstimate=02:27:53.1961974 [PrintingService.cs@1912] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.520364212653774;StartedAtUtc;07:06:51.8314832;11:45:19.3611215;04:38:27.5296383;False;566;343;343;02:32:40.1688494;03:36:17.0026378;03:36:17.0026378;02:19:32.4868451;00:23:24;01:36:31.4925520;00:00:14.8899292;02:28:14.6076856;00:00:00.0220666;07:02:31.9891354;00:00:00;02:27:53.1961974;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.6907960;00:00:00;00:04:28.3489380;04:04:53.6664561;06:19:17.9494014 [PrintingService.cs@1918] +06/28/2026 03:41:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 342. PreviewWeight=LayerWeight { Index = 342, FillTotalRelative = 0.18267693160038362, FillMaxRelative = 0.4272806966526401, TimeFromPreview = 35.30088334411079, EnergyDensityIncreaseFactor = 0 }, FillArea=17968.365359492636, PreviewFillRatio=0.4272806966526401, Results=4, StreamingSeconds (preview) = 35.30088334411079, StreamingSeconds (extrapolated) = 36.76476340021097, StreamingSeconds (no overhead) = 20.3782006 (02:28:14.6076856), LayerElapsedSeconds=38.8465251, LayerStreamStats=StreamStats { EdgeCount = 78497, OnTraceLength = 15287.430868789554, AllTraceLength = 20629.6367444247 }, TotalStreamStats=StreamStats { EdgeCount = 33387983, OnTraceLength = 6411869.6286209915, AllTraceLength = 14567388.460055696 } [PrintingService.cs@2147] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 343, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.5203662729083, Elapsed = 07:06:51.8289792, TimeTotal = 11:45:19.3555434, Remaining = 04:38:27.5265642, Incomplete = False, SoftCount = 566, LayerPrintDone = 343, WeightsDone = 343, WeightDone = 02:32:40.1663454, WeightTotal = 03:36:16.9985059, WeightTotalEstimate = 03:36:16.9985060, LayerRecoatElapsed = 02:19:32.4868451, LayerRecoatDelays = 00:23:24, LayerRecoatPrintLayersElapsed = 01:36:31.4925520, LayerRecoatNoDelayAverage = 00:00:14.8899292, StreamingElapsed = 02:28:14.6076856, ObjectLayerOverheadAverageDuration = 00:00:00.0220593, TimeLayers = 07:02:31.9850035, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:53.1947512, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.6907960, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3489380, JobElapsed = 04:04:53.6672846, JobTotal = 06:19:17.9452695, WeightEstimate = 01:03:36.8321606 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:36. coolingEstimate=02:27:53.1947512 [PrintingService.cs@1912] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.5203662729083;StartedAtUtc;07:06:51.8289792;11:45:19.3555434;04:38:27.5265642;False;566;343;343;02:32:40.1663454;03:36:16.9985059;03:36:16.9985060;02:19:32.4868451;00:23:24;01:36:31.4925520;00:00:14.8899292;02:28:14.6076856;00:00:00.0220593;07:02:31.9850035;00:00:00;02:27:53.1947512;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.6907960;00:00:00;00:04:28.3489380;04:04:53.6672846;06:19:17.9452695 [PrintingService.cs@1918] +06/28/2026 03:41:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 343. PrevPreviewWeight=LayerWeight { Index = 342, FillTotalRelative = 0.18267693160038362, FillMaxRelative = 0.4272806966526401, TimeFromPreview = 35.30088334411079, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4272806966526401, PreviewWeight=LayerWeight { Index = 343, FillTotalRelative = 0.18206787386472253, FillMaxRelative = 0.4244873963585225, TimeFromPreview = 36.2399913423389, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0323827. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68689154, XYCompressed = 6790060, LSource = 35757279, LCompressed = 1456137 } [McuMovementClient.cs@491] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627564. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0964700. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68689154, XYCompressed = 6790060, LSource = 35757279, LCompressed = 1456137 } [McuMovementClient.cs@491] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1084808. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68689154, XYCompressed = 6790060, LSource = 35757279, LCompressed = 1456137 } [McuMovementClient.cs@491] +06/28/2026 03:41:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4114.587496855017, PrevLayerFillRatio=0.4272806966526401: Z1=105.30243888148173, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38363.395460447464, Z2 = 38850 } } [LayerClient.cs@969] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6039930940029 (6039930940029 @ 0) for mcu = 50318.973319 [27/06/2026 01:05:34] (50332.757833575 sec) to 6043373010184 (from now=6043253010184, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6039930940029 (6039930940029 @ 0) for mcu = 50318.973319 [27/06/2026 01:05:34] (50332.757833575 sec) to 6043373010184 (from external timestamp, flags=None, requested=6043373010184 (6043373010184 @ 0) for mcu = 50347.657814 [27/06/2026 01:06:03] (50361.44175153333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6039930940029 (6039930940029 @ 0) for mcu = 50318.973319 [27/06/2026 01:05:34] (50332.757833575 sec) to 6043373010184 (from external timestamp, flags=None, requested=6043373010184 (6043373010184 @ 0) for mcu = 50347.657814 [27/06/2026 01:06:03] (50361.44175153333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:41:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:41:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0742424. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2849324. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68689154, XYCompressed = 6790060, LSource = 35757279, LCompressed = 1456137 } [McuMovementClient.cs@491] +06/28/2026 03:41:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:41:24 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:41:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:41:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 343, Weight=LayerWeight { Index = 343, FillTotalRelative = 0.18206787386472253, FillMaxRelative = 0.4244873963585225, TimeFromPreview = 36.2399913423389, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:41:27 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6045504120684, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:41:27 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6045624129924, flushed existing data. Was Timestamp=0, Now=6045504132355, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:41:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:41:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6043195988259 (6043195988259 @ 0) for mcu = 50346.182612 [27/06/2026 01:06:02] (50359.966568825 sec) to 6045624151104 (from now=6045504151104, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:41:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6043196012236 (1547058179132668 @ 8) for mcu = 50346.182812 [27/06/2026 01:06:02] (50359.966768641534 sec) to 6045624151104 (from now=6045504151104, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:41:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6043196012278 (1547058179143401 @ 8) for mcu = 50346.182812 [27/06/2026 01:06:02] (50359.96676899092 sec) to 6045624151104 (from now=6045504151104, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:41:27 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:41:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0022098 ~ 6 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:41:28 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:41:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.8850642. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.9739026. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68902460, XYCompressed = 6809378, LSource = 35866384, LCompressed = 1459049 } [McuMovementClient.cs@491] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:41:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 343 [PrintingService.cs@2118] +06/28/2026 03:41:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.9857658. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68902460, XYCompressed = 6809378, LSource = 35866384, LCompressed = 1459049 } [McuMovementClient.cs@491] +06/28/2026 03:41:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 344, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.644382729706294, Elapsed = 07:07:30.8101437, TimeTotal = 11:44:57.0916499, Remaining = 04:37:26.2815062, Incomplete = False, SoftCount = 566, LayerPrintDone = 344, WeightsDone = 344, WeightDone = 02:33:00.3050242, WeightTotal = 03:35:58.8087994, WeightTotalEstimate = 03:35:58.8087995, LayerRecoatElapsed = 02:19:51.3293308, LayerRecoatDelays = 00:23:27, LayerRecoatPrintLayersElapsed = 01:36:50.3350377, LayerRecoatNoDelayAverage = 00:00:14.8919602, StreamingElapsed = 02:28:34.7243051, ObjectLayerOverheadAverageDuration = 00:00:00.0220593, TimeLayers = 07:02:15.4932305, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:47.4226307, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.9548260, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3794030, JobElapsed = 04:05:32.6409963, JobTotal = 06:19:01.1590015, WeightEstimate = 01:02:58.5037753 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:13. coolingEstimate=02:27:47.4226307 [PrintingService.cs@1912] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.644382729706294;StartedAtUtc;07:07:30.8101437;11:44:57.0916499;04:37:26.2815062;False;566;344;344;02:33:00.3050242;03:35:58.8087994;03:35:58.8087995;02:19:51.3293308;00:23:27;01:36:50.3350377;00:00:14.8919602;02:28:34.7243051;00:00:00.0220593;07:02:15.4932305;00:00:00;02:27:47.4226307;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.9548260;00:00:00;00:04:28.3794030;04:05:32.6409963;06:19:01.1590015 [PrintingService.cs@1918] +06/28/2026 03:41:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 343. PreviewWeight=LayerWeight { Index = 343, FillTotalRelative = 0.18206787386472253, FillMaxRelative = 0.4244873963585225, TimeFromPreview = 36.2399913423389, EnergyDensityIncreaseFactor = 0 }, FillArea=20272.30696894853, PreviewFillRatio=0.4244873963585225, Results=4, StreamingSeconds (preview) = 36.2399913423389, StreamingSeconds (extrapolated) = 37.30632600975283, StreamingSeconds (no overhead) = 20.1166195 (02:28:34.7243051), LayerElapsedSeconds=38.9738622, LayerStreamStats=StreamStats { EdgeCount = 105447, OnTraceLength = 20624.162466034293, AllTraceLength = 26593.765179425478 }, TotalStreamStats=StreamStats { EdgeCount = 33493430, OnTraceLength = 6432493.791087026, AllTraceLength = 14593982.225235121 } [PrintingService.cs@2147] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 344, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.64438806425583, Elapsed = 07:07:30.8036421, TimeTotal = 11:44:57.0772084, Remaining = 04:37:26.2735663, Incomplete = False, SoftCount = 566, LayerPrintDone = 344, WeightsDone = 344, WeightDone = 02:33:00.2985226, WeightTotal = 03:35:58.7981020, WeightTotalEstimate = 03:35:58.7981021, LayerRecoatElapsed = 02:19:51.3293308, LayerRecoatDelays = 00:23:27, LayerRecoatPrintLayersElapsed = 01:36:50.3350377, LayerRecoatNoDelayAverage = 00:00:14.8919602, StreamingElapsed = 02:28:34.7243051, ObjectLayerOverheadAverageDuration = 00:00:00.0220404, TimeLayers = 07:02:15.4825331, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:47.4188866, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.9548260, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3794030, JobElapsed = 04:05:32.6425859, JobTotal = 06:19:01.1483041, WeightEstimate = 01:02:58.4995795 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:19:13. coolingEstimate=02:27:47.4188866 [PrintingService.cs@1912] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.64438806425583;StartedAtUtc;07:07:30.8036421;11:44:57.0772084;04:37:26.2735663;False;566;344;344;02:33:00.2985226;03:35:58.7981020;03:35:58.7981021;02:19:51.3293308;00:23:27;01:36:50.3350377;00:00:14.8919602;02:28:34.7243051;00:00:00.0220404;07:02:15.4825331;00:00:00;02:27:47.4188866;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.9548260;00:00:00;00:04:28.3794030;04:05:32.6425859;06:19:01.1483041 [PrintingService.cs@1918] +06/28/2026 03:41:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 344. PrevPreviewWeight=LayerWeight { Index = 343, FillTotalRelative = 0.18206787386472253, FillMaxRelative = 0.4244873963585225, TimeFromPreview = 36.2399913423389, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4244873963585225, PreviewWeight=LayerWeight { Index = 344, FillTotalRelative = 0.18247321460841878, FillMaxRelative = 0.4272883966996512, TimeFromPreview = 35.502610907622405, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.0005884. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68902460, XYCompressed = 6809378, LSource = 35866384, LCompressed = 1459049 } [McuMovementClient.cs@491] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633579. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.0673196. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68902460, XYCompressed = 6809378, LSource = 35866384, LCompressed = 1459049 } [McuMovementClient.cs@491] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.0801958. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68902460, XYCompressed = 6809378, LSource = 35866384, LCompressed = 1459049 } [McuMovementClient.cs@491] +06/28/2026 03:41:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4110.059717325479, PrevLayerFillRatio=0.4244873963585225: Z1=105.18656183972665, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38468.58202228719, Z2 = 38950 } } [LayerClient.cs@969] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6044592690702 (6044592690702 @ 0) for mcu = 50357.822043 [27/06/2026 01:06:13] (50371.60575585 sec) to 6048049506356 (from now=6047929506356, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6044592690702 (6044592690702 @ 0) for mcu = 50357.822043 [27/06/2026 01:06:13] (50371.60575585 sec) to 6048049506356 (from external timestamp, flags=None, requested=6048049506356 (6048049506356 @ 0) for mcu = 50386.629431 [27/06/2026 01:06:42] (50400.41255296666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6044592690702 (6044592690702 @ 0) for mcu = 50357.822043 [27/06/2026 01:06:13] (50371.60575585 sec) to 6048049506356 (from external timestamp, flags=None, requested=6048049506356 (6048049506356 @ 0) for mcu = 50386.629431 [27/06/2026 01:06:42] (50400.41255296666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:41:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:41:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0751402. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:50.2567042. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 68902460, XYCompressed = 6809378, LSource = 35866384, LCompressed = 1459049 } [McuMovementClient.cs@491] +06/28/2026 03:41:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:41:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:41:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:42:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:42:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 344, Weight=LayerWeight { Index = 344, FillTotalRelative = 0.18247321460841878, FillMaxRelative = 0.4272883966996512, TimeFromPreview = 35.502610907622405, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:42:01 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6049632842437, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:42:01 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6049752855358, flushed existing data. Was Timestamp=0, Now=6049632857950, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:42:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:42:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6047915136181 (6047915136181 @ 0) for mcu = 50385.509716 [27/06/2026 01:06:41] (50399.29280150833 sec) to 6049752964469 (from now=6049632964469, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:42:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6047915160178 (1548266281005766 @ 8) for mcu = 50385.509916 [27/06/2026 01:06:41] (50399.29300148978 sec) to 6049752964469 (from now=6049632964469, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:42:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6047915160198 (1548266281010816 @ 8) for mcu = 50385.509916 [27/06/2026 01:06:41] (50399.293001654165 sec) to 6049752964469 (from now=6049632964469, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:42:01 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:42:02 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:42:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:42:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 03:42:17 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (76 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:42:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 03:42:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 03:42:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 03:42:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 03:42:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 03:42:21 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:42:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.0916501. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.0916501. Loops = 77. GC duration = 00:00:00.3805645. SinceCollect=00:01:13.6845628. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69061598, XYCompressed = 6819542, LSource = 35948046, LCompressed = 1461678 } [McuMovementClient.cs@478] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=126775, gen1=32249, gen2=917, LatencyMode=Interactive, FreeMemory=5672763392, Live=357322664, HeapSizeBytes=365055536, FragmentedBytes=8602872, TotalCommittedBytes=379437056, PinnedObjectsCount=25, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:42:22 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 344 [PrintingService.cs@2118] +06/28/2026 03:42:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0129829. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69061598, XYCompressed = 6819542, LSource = 35948046, LCompressed = 1461678 } [McuMovementClient.cs@491] +06/28/2026 03:42:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 345, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.76824427621954, Elapsed = 07:08:05.5216906, TimeTotal = 11:44:28.0003290, Remaining = 04:36:22.4786384, Incomplete = False, SoftCount = 566, LayerPrintDone = 345, WeightsDone = 345, WeightDone = 02:33:20.7361510, WeightTotal = 03:35:43.6835934, WeightTotalEstimate = 03:35:43.6835935, LayerRecoatElapsed = 02:20:05.6097509, LayerRecoatDelays = 00:23:30, LayerRecoatPrintLayersElapsed = 01:37:04.6154579, LayerRecoatNoDelayAverage = 00:00:14.8842761, StreamingElapsed = 02:28:55.1398931, ObjectLayerOverheadAverageDuration = 00:00:00.0220404, TimeLayers = 07:01:53.9441039, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:39.8804364, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:44.9558930, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2641415, JobElapsed = 04:06:07.3532459, JobTotal = 06:18:40.7240694, WeightEstimate = 01:02:22.9474425 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:18:44. coolingEstimate=02:27:39.8804364 [PrintingService.cs@1912] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.76824427621954;StartedAtUtc;07:08:05.5216906;11:44:28.0003290;04:36:22.4786384;False;566;345;345;02:33:20.7361510;03:35:43.6835934;03:35:43.6835935;02:20:05.6097509;00:23:30;01:37:04.6154579;00:00:14.8842761;02:28:55.1398931;00:00:00.0220404;07:01:53.9441039;00:00:00;02:27:39.8804364;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:44.9558930;00:00:00;00:04:28.2641415;04:06:07.3532459;06:18:40.7240694 [PrintingService.cs@1918] +06/28/2026 03:42:22 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 344. PreviewWeight=LayerWeight { Index = 344, FillTotalRelative = 0.18247321460841878, FillMaxRelative = 0.4272883966996512, TimeFromPreview = 35.502610907622405, EnergyDensityIncreaseFactor = 0 }, FillArea=20107.338746275127, PreviewFillRatio=0.4272883966996512, Results=4, StreamingSeconds (preview) = 35.502610907622405, StreamingSeconds (extrapolated) = 34.530096546533244, StreamingSeconds (no overhead) = 20.415588 (02:28:55.1398931), LayerElapsedSeconds=34.7106783, LayerStreamStats=StreamStats { EdgeCount = 78520, OnTraceLength = 15289.64299185574, AllTraceLength = 20501.90342077613 }, TotalStreamStats=StreamStats { EdgeCount = 33571950, OnTraceLength = 6447783.4340788815, AllTraceLength = 14614484.128655897 } [PrintingService.cs@2147] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 345, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.76824907571908, Elapsed = 07:08:05.5158257, TimeTotal = 11:44:27.9873394, Remaining = 04:36:22.4715137, Incomplete = False, SoftCount = 566, LayerPrintDone = 345, WeightsDone = 345, WeightDone = 02:33:20.7302861, WeightTotal = 03:35:43.6739715, WeightTotalEstimate = 03:35:43.6739715, LayerRecoatElapsed = 02:20:05.6097509, LayerRecoatDelays = 00:23:30, LayerRecoatPrintLayersElapsed = 01:37:04.6154579, LayerRecoatNoDelayAverage = 00:00:14.8842761, StreamingElapsed = 02:28:55.1398931, ObjectLayerOverheadAverageDuration = 00:00:00.0220234, TimeLayers = 07:01:53.9344820, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:39.8770687, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:44.9558930, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2641415, JobElapsed = 04:06:07.3570974, JobTotal = 06:18:40.7144475, WeightEstimate = 01:02:22.9436854 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:18:44. coolingEstimate=02:27:39.8770687 [PrintingService.cs@1912] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.76824907571908;StartedAtUtc;07:08:05.5158257;11:44:27.9873394;04:36:22.4715137;False;566;345;345;02:33:20.7302861;03:35:43.6739715;03:35:43.6739715;02:20:05.6097509;00:23:30;01:37:04.6154579;00:00:14.8842761;02:28:55.1398931;00:00:00.0220234;07:01:53.9344820;00:00:00;02:27:39.8770687;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:44.9558930;00:00:00;00:04:28.2641415;04:06:07.3570974;06:18:40.7144475 [PrintingService.cs@1918] +06/28/2026 03:42:22 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 345. PrevPreviewWeight=LayerWeight { Index = 344, FillTotalRelative = 0.18247321460841878, FillMaxRelative = 0.4272883966996512, TimeFromPreview = 35.502610907622405, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4272883966996512, PreviewWeight=LayerWeight { Index = 345, FillTotalRelative = 0.1818523575587774, FillMaxRelative = 0.4244429713242789, TimeFromPreview = 36.516649128119106, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0322165. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69061598, XYCompressed = 6819542, LSource = 35948046, LCompressed = 1461678 } [McuMovementClient.cs@491] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634305. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0954318. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69061598, XYCompressed = 6819542, LSource = 35948046, LCompressed = 1461678 } [McuMovementClient.cs@491] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1092989. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69061598, XYCompressed = 6819542, LSource = 35948046, LCompressed = 1461678 } [McuMovementClient.cs@491] +06/28/2026 03:42:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4114.5999781894825, PrevLayerFillRatio=0.4272883966996512: Z1=105.30275830960441, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38573.884780596796, Z2 = 39050 } } [LayerClient.cs@969] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6049269259839 (6049269259839 @ 0) for mcu = 50396.794295 [27/06/2026 01:06:52] (50410.577165325 sec) to 6052215164455 (from now=6052095164455, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6049269259839 (6049269259839 @ 0) for mcu = 50396.794295 [27/06/2026 01:06:52] (50410.577165325 sec) to 6052215164455 (from external timestamp, flags=None, requested=6052215164455 (6052215164455 @ 0) for mcu = 50421.344009 [27/06/2026 01:07:17] (50435.12637045833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6049269259839 (6049269259839 @ 0) for mcu = 50396.794295 [27/06/2026 01:06:52] (50410.577165325 sec) to 6052215164455 (from external timestamp, flags=None, requested=6052215164455 (6052215164455 @ 0) for mcu = 50421.344009 [27/06/2026 01:07:17] (50435.12637045833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:42:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0914667 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:42:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0729105. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2862693. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69061598, XYCompressed = 6819542, LSource = 35948046, LCompressed = 1461678 } [McuMovementClient.cs@491] +06/28/2026 03:42:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:42:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:42:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:42:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 345, Weight=LayerWeight { Index = 345, FillTotalRelative = 0.1818523575587774, FillMaxRelative = 0.4244429713242789, TimeFromPreview = 36.516649128119106, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:42:40 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6054294513082, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:42:40 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6054414518405, flushed existing data. Was Timestamp=0, Now=6054294520884, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:42:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:42:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6052034956819 (6052034956819 @ 0) for mcu = 50419.842237 [27/06/2026 01:07:15] (50433.624640158334 sec) to 6054414719208 (from now=6054294719208, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:42:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6052034980812 (1549320955088061 @ 8) for mcu = 50419.842437 [27/06/2026 01:07:15] (50433.62484010615 sec) to 6054414719208 (from now=6054294719208, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:42:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6052034980805 (1549320955086335 @ 8) for mcu = 50419.842437 [27/06/2026 01:07:15] (50433.62484004997 sec) to 6054414719208 (from now=6054294719208, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:42:40 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:42:41 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:42:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:42:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.6391829. Loops = 75. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.4784918. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69274840, XYCompressed = 6838807, LSource = 36057128, LCompressed = 1464572 } [McuMovementClient.cs@491] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:43:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 345 [PrintingService.cs@2118] +06/28/2026 03:43:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.4917922. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69274840, XYCompressed = 6838807, LSource = 36057128, LCompressed = 1464572 } [McuMovementClient.cs@491] +06/28/2026 03:43:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 346, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.89301544384509, Elapsed = 07:08:43.9967029, TimeTotal = 11:44:04.5768458, Remaining = 04:35:20.5801429, Incomplete = False, SoftCount = 566, LayerPrintDone = 346, WeightsDone = 346, WeightDone = 02:33:40.7939953, WeightTotal = 03:35:25.3870121, WeightTotalEstimate = 03:35:25.3870121, LayerRecoatElapsed = 02:20:24.0269189, LayerRecoatDelays = 00:23:33, LayerRecoatPrintLayersElapsed = 01:37:23.0326260, LayerRecoatNoDelayAverage = 00:00:14.8854075, StreamingElapsed = 02:29:15.1815789, ObjectLayerOverheadAverageDuration = 00:00:00.0220234, TimeLayers = 07:01:36.5933756, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:33.8076815, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.1029750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2811125, JobElapsed = 04:06:45.8315333, JobTotal = 06:18:23.2092881, WeightEstimate = 01:01:44.5930168 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:18:21. coolingEstimate=02:27:33.8076815 [PrintingService.cs@1912] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.89301544384509;StartedAtUtc;07:08:43.9967029;11:44:04.5768458;04:35:20.5801429;False;566;346;346;02:33:40.7939953;03:35:25.3870121;03:35:25.3870121;02:20:24.0269189;00:23:33;01:37:23.0326260;00:00:14.8854075;02:29:15.1815789;00:00:00.0220234;07:01:36.5933756;00:00:00;02:27:33.8076815;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.1029750;00:00:00;00:04:28.2811125;04:06:45.8315333;06:18:23.2092881 [PrintingService.cs@1918] +06/28/2026 03:43:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 345. PreviewWeight=LayerWeight { Index = 345, FillTotalRelative = 0.1818523575587774, FillMaxRelative = 0.4244429713242789, TimeFromPreview = 36.516649128119106, EnergyDensityIncreaseFactor = 0 }, FillArea=19416.46824438769, PreviewFillRatio=0.4244429713242789, Results=4, StreamingSeconds (preview) = 36.516649128119106, StreamingSeconds (extrapolated) = 37.32864522069271, StreamingSeconds (no overhead) = 20.0416858 (02:29:15.1815789), LayerElapsedSeconds=38.4745147, LayerStreamStats=StreamStats { EdgeCount = 105428, OnTraceLength = 20621.038128480315, AllTraceLength = 26472.037322163582 }, TotalStreamStats=StreamStats { EdgeCount = 33677378, OnTraceLength = 6468404.472207362, AllTraceLength = 14640956.165978061 } [PrintingService.cs@2147] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 346, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 60.89301750511182, Elapsed = 07:08:43.9941770, TimeTotal = 11:44:04.5712677, Remaining = 04:35:20.5770907, Incomplete = False, SoftCount = 566, LayerPrintDone = 346, WeightsDone = 346, WeightDone = 02:33:40.7914694, WeightTotal = 03:35:25.3828802, WeightTotalEstimate = 03:35:25.3828803, LayerRecoatElapsed = 02:20:24.0269189, LayerRecoatDelays = 00:23:33, LayerRecoatPrintLayersElapsed = 01:37:23.0326260, LayerRecoatNoDelayAverage = 00:00:14.8854075, StreamingElapsed = 02:29:15.1815789, ObjectLayerOverheadAverageDuration = 00:00:00.0220161, TimeLayers = 07:01:36.5892437, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:33.8062353, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.1029750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.2811125, JobElapsed = 04:06:45.8329585, JobTotal = 06:18:23.2051562, WeightEstimate = 01:01:44.5914109 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:18:21. coolingEstimate=02:27:33.8062353 [PrintingService.cs@1912] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 60.89301750511182;StartedAtUtc;07:08:43.9941770;11:44:04.5712677;04:35:20.5770907;False;566;346;346;02:33:40.7914694;03:35:25.3828802;03:35:25.3828803;02:20:24.0269189;00:23:33;01:37:23.0326260;00:00:14.8854075;02:29:15.1815789;00:00:00.0220161;07:01:36.5892437;00:00:00;02:27:33.8062353;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.1029750;00:00:00;00:04:28.2811125;04:06:45.8329585;06:18:23.2051562 [PrintingService.cs@1918] +06/28/2026 03:43:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 346. PrevPreviewWeight=LayerWeight { Index = 345, FillTotalRelative = 0.1818523575587774, FillMaxRelative = 0.4244429713242789, TimeFromPreview = 36.516649128119106, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4244429713242789, PreviewWeight=LayerWeight { Index = 346, FillTotalRelative = 0.1822113842697103, FillMaxRelative = 0.42713279969883367, TimeFromPreview = 35.13586936501552, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.5084077. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69274840, XYCompressed = 6838807, LSource = 36057128, LCompressed = 1464572 } [McuMovementClient.cs@491] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629934. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.5712387. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69274840, XYCompressed = 6838807, LSource = 36057128, LCompressed = 1464572 } [McuMovementClient.cs@491] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.5835268. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69274840, XYCompressed = 6838807, LSource = 36057128, LCompressed = 1464572 } [McuMovementClient.cs@491] +06/28/2026 03:43:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4109.987706893565, PrevLayerFillRatio=0.4244429713242789: Z1=105.18471891522661, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38679.06949951202, Z2 = 39150 } } [LayerClient.cs@969] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6053434870994 (6053434870994 @ 0) for mcu = 50431.508395 [27/06/2026 01:07:27] (50445.290591616664 sec) to 6056831900191 (from now=6056711900191, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6053434870994 (6053434870994 @ 0) for mcu = 50431.508395 [27/06/2026 01:07:27] (50445.290591616664 sec) to 6056831900191 (from external timestamp, flags=None, requested=6056831900191 (6056831900191 @ 0) for mcu = 50459.817532 [27/06/2026 01:07:55] (50473.59916825833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6053434870994 (6053434870994 @ 0) for mcu = 50431.508395 [27/06/2026 01:07:27] (50445.290591616664 sec) to 6056831900191 (from external timestamp, flags=None, requested=6056831900191 (6056831900191 @ 0) for mcu = 50459.817532 [27/06/2026 01:07:55] (50473.59916825833 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:43:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0787097. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.7592412. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69274840, XYCompressed = 6838807, LSource = 36057128, LCompressed = 1464572 } [McuMovementClient.cs@491] +06/28/2026 03:43:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:43:17 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] +06/28/2026 03:43:18 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:43:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:43:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 346, Weight=LayerWeight { Index = 346, FillTotalRelative = 0.1822113842697103, FillMaxRelative = 0.42713279969883367, TimeFromPreview = 35.13586936501552, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:43:21 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6059208743637, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:43:21 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6059328749888, flushed existing data. Was Timestamp=0, Now=6059208752441, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:43:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:43:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6056697527758 (6056697527758 @ 0) for mcu = 50458.697813 [27/06/2026 01:07:54] (50472.479397983334 sec) to 6059328792758 (from now=6059208792758, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:43:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6056697551757 (1550514573249961 @ 8) for mcu = 50458.698013 [27/06/2026 01:07:54] (50472.4795979805 sec) to 6059328792758 (from now=6059208792758, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:43:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6056697551755 (1550514573249485 @ 8) for mcu = 50458.698013 [27/06/2026 01:07:54] (50472.47959796501 sec) to 6059328792758 (from now=6059208792758, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:43:21 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:43:22 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (133 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:43:22 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:43:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0868601 ~ 6.02 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:43:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:18.9167279. Loops = 76. [McuMovementClient.cs@475] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:18.9167279. Loops = 76. GC duration = 00:00:00.4771663. SinceCollect=00:01:19.8343778. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69433956, XYCompressed = 6849033, LSource = 36138764, LCompressed = 1467228 } [McuMovementClient.cs@478] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=126983, gen1=32352, gen2=918, LatencyMode=Interactive, FreeMemory=5702320128, Live=354328144, HeapSizeBytes=365548096, FragmentedBytes=11808176, TotalCommittedBytes=376766464, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:43:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 346 [PrintingService.cs@2118] +06/28/2026 03:43:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0127818. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69433956, XYCompressed = 6849033, LSource = 36138764, LCompressed = 1467228 } [McuMovementClient.cs@491] +06/28/2026 03:43:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 347, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.013629633927366, Elapsed = 07:09:25.3551774, TimeTotal = 11:43:48.8517041, Remaining = 04:34:23.4965267, Incomplete = False, SoftCount = 566, LayerPrintDone = 347, WeightsDone = 347, WeightDone = 02:34:01.2603638, WeightTotal = 03:35:08.4133438, WeightTotalEstimate = 03:35:08.4133439, LayerRecoatElapsed = 02:20:44.9190249, LayerRecoatDelays = 00:23:36, LayerRecoatPrintLayersElapsed = 01:37:43.9247323, LayerRecoatNoDelayAverage = 00:00:14.8917776, StreamingElapsed = 02:29:35.6284572, ObjectLayerOverheadAverageDuration = 00:00:00.0220161, TimeLayers = 07:01:24.9451225, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:29.7307929, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.9310880, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3766640, JobElapsed = 04:07:27.1899174, JobTotal = 06:18:10.6373705, WeightEstimate = 01:01:07.1529801 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:18:05. coolingEstimate=02:27:29.7307929 [PrintingService.cs@1912] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.013629633927366;StartedAtUtc;07:09:25.3551774;11:43:48.8517041;04:34:23.4965267;False;566;347;347;02:34:01.2603638;03:35:08.4133438;03:35:08.4133439;02:20:44.9190249;00:23:36;01:37:43.9247323;00:00:14.8917776;02:29:35.6284572;00:00:00.0220161;07:01:24.9451225;00:00:00;02:27:29.7307929;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.9310880;00:00:00;00:04:28.3766640;04:07:27.1899174;06:18:10.6373705 [PrintingService.cs@1918] +06/28/2026 03:43:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 346. PreviewWeight=LayerWeight { Index = 346, FillTotalRelative = 0.1822113842697103, FillMaxRelative = 0.42713279969883367, TimeFromPreview = 35.13586936501552, EnergyDensityIncreaseFactor = 0 }, FillArea=17961.082389226664, PreviewFillRatio=0.42713279969883367, Results=4, StreamingSeconds (preview) = 35.13586936501552, StreamingSeconds (extrapolated) = 36.41641471643432, StreamingSeconds (no overhead) = 20.4468783 (02:29:35.6284572), LayerElapsedSeconds=41.3570368, LayerStreamStats=StreamStats { EdgeCount = 78498, OnTraceLength = 15287.84835703671, AllTraceLength = 20392.801972702146 }, TotalStreamStats=StreamStats { EdgeCount = 33755876, OnTraceLength = 6483692.320564399, AllTraceLength = 14661348.967950763 } [PrintingService.cs@2147] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 347, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.013631779289035, Elapsed = 07:09:25.3525403, TimeTotal = 11:43:48.8458971, Remaining = 04:34:23.4933568, Incomplete = False, SoftCount = 566, LayerPrintDone = 347, WeightsDone = 347, WeightDone = 02:34:01.2577267, WeightTotal = 03:35:08.4090423, WeightTotalEstimate = 03:35:08.4090423, LayerRecoatElapsed = 02:20:44.9190249, LayerRecoatDelays = 00:23:36, LayerRecoatPrintLayersElapsed = 01:37:43.9247323, LayerRecoatNoDelayAverage = 00:00:14.8917776, StreamingElapsed = 02:29:35.6284572, ObjectLayerOverheadAverageDuration = 00:00:00.0220085, TimeLayers = 07:01:24.9408210, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:29.7292874, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.9310880, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3766640, JobElapsed = 04:07:27.1921451, JobTotal = 06:18:10.6330690, WeightEstimate = 01:01:07.1513156 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:18:05. coolingEstimate=02:27:29.7292874 [PrintingService.cs@1912] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.013631779289035;StartedAtUtc;07:09:25.3525403;11:43:48.8458971;04:34:23.4933568;False;566;347;347;02:34:01.2577267;03:35:08.4090423;03:35:08.4090423;02:20:44.9190249;00:23:36;01:37:43.9247323;00:00:14.8917776;02:29:35.6284572;00:00:00.0220085;07:01:24.9408210;00:00:00;02:27:29.7292874;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.9310880;00:00:00;00:04:28.3766640;04:07:27.1921451;06:18:10.6330690 [PrintingService.cs@1918] +06/28/2026 03:43:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 347. PrevPreviewWeight=LayerWeight { Index = 346, FillTotalRelative = 0.1822113842697103, FillMaxRelative = 0.42713279969883367, TimeFromPreview = 35.13586936501552, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42713279969883367, PreviewWeight=LayerWeight { Index = 347, FillTotalRelative = 0.1816046890276704, FillMaxRelative = 0.4243399650251207, TimeFromPreview = 36.19368834747935, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0384482. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69433956, XYCompressed = 6849033, LSource = 36138764, LCompressed = 1467228 } [McuMovementClient.cs@491] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625283. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1051425. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69433956, XYCompressed = 6849033, LSource = 36138764, LCompressed = 1467228 } [McuMovementClient.cs@491] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1188339. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69433956, XYCompressed = 6849033, LSource = 36138764, LCompressed = 1467228 } [McuMovementClient.cs@491] +06/28/2026 03:43:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4114.347764377511, PrevLayerFillRatio=0.42713279969883367: Z1=105.2963035363032, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38784.36580304833, Z2 = 39250 } } [LayerClient.cs@969] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6058051614221 (6058051614221 @ 0) for mcu = 50469.982086 [27/06/2026 01:08:05] (50483.76345184167 sec) to 6061796174909 (from now=6061676174909, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6058051614221 (6058051614221 @ 0) for mcu = 50469.982086 [27/06/2026 01:08:05] (50483.76345184167 sec) to 6061796174909 (from external timestamp, flags=None, requested=6061796174909 (6061796174909 @ 0) for mcu = 50501.187411 [27/06/2026 01:08:37] (50514.96812424167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6058051614221 (6058051614221 @ 0) for mcu = 50469.982086 [27/06/2026 01:08:05] (50483.76345184167 sec) to 6061796174909 (from external timestamp, flags=None, requested=6061796174909 (6061796174909 @ 0) for mcu = 50501.187411 [27/06/2026 01:08:37] (50514.96812424167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:43:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0727487. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2924051. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69433956, XYCompressed = 6849033, LSource = 36138764, LCompressed = 1467228 } [McuMovementClient.cs@491] +06/28/2026 03:43:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:43:57 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:44:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:44:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 347, Weight=LayerWeight { Index = 347, FillTotalRelative = 0.1816046890276704, FillMaxRelative = 0.4243399650251207, TimeFromPreview = 36.19368834747935, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:44:00 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6063840534816, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:44:00 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6063960544871, flushed existing data. Was Timestamp=0, Now=6063840547396, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:44:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:44:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6061602953520 (6061602953520 @ 0) for mcu = 50499.577203 [27/06/2026 01:08:35] (50513.357946 sec) to 6063960594376 (from now=6063840594376, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6061602977519 (1551770362244905 @ 8) for mcu = 50499.577403 [27/06/2026 01:08:35] (50513.358145993 sec) to 6063960594376 (from now=6063840594376, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6061602977521 (1551770362245576 @ 8) for mcu = 50499.577403 [27/06/2026 01:08:35] (50513.35814601484 sec) to 6063960594376 (from now=6063840594376, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:00 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:44:01 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:44:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.7298987. Loops = 75. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.2649209. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69647222, XYCompressed = 6868157, LSource = 36247869, LCompressed = 1470136 } [McuMovementClient.cs@491] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:44:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 347 [PrintingService.cs@2118] +06/28/2026 03:44:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.2767817. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69647222, XYCompressed = 6868157, LSource = 36247869, LCompressed = 1470136 } [McuMovementClient.cs@491] +06/28/2026 03:44:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 348, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.1391140512888, Elapsed = 07:10:03.6199286, TimeTotal = 11:43:24.7658508, Remaining = 04:33:21.1459222, Incomplete = False, SoftCount = 566, LayerPrintDone = 348, WeightsDone = 348, WeightDone = 02:34:21.4009415, WeightTotal = 03:34:50.1612333, WeightTotalEstimate = 03:34:50.1612333, LayerRecoatElapsed = 02:21:03.0431984, LayerRecoatDelays = 00:23:39, LayerRecoatPrintLayersElapsed = 01:38:02.0489057, LayerRecoatNoDelayAverage = 00:00:14.8922689, StreamingElapsed = 02:29:55.7496635, ObjectLayerOverheadAverageDuration = 00:00:00.0220085, TimeLayers = 07:01:07.1037497, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:23.4863124, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.9949570, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3840335, JobElapsed = 04:08:05.4508476, JobTotal = 06:17:52.7247592, WeightEstimate = 01:00:28.7602918 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:17:41. coolingEstimate=02:27:23.4863124 [PrintingService.cs@1912] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.1391140512888;StartedAtUtc;07:10:03.6199286;11:43:24.7658508;04:33:21.1459222;False;566;348;348;02:34:21.4009415;03:34:50.1612333;03:34:50.1612333;02:21:03.0431984;00:23:39;01:38:02.0489057;00:00:14.8922689;02:29:55.7496635;00:00:00.0220085;07:01:07.1037497;00:00:00;02:27:23.4863124;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.9949570;00:00:00;00:04:28.3840335;04:08:05.4508476;06:17:52.7247592 [PrintingService.cs@1918] +06/28/2026 03:44:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 347. PreviewWeight=LayerWeight { Index = 347, FillTotalRelative = 0.1816046890276704, FillMaxRelative = 0.4243399650251207, TimeFromPreview = 36.19368834747935, EnergyDensityIncreaseFactor = 0 }, FillArea=20245.21033412193, PreviewFillRatio=0.4243399650251207, Results=4, StreamingSeconds (preview) = 36.19368834747935, StreamingSeconds (extrapolated) = 37.36901531757082, StreamingSeconds (no overhead) = 20.1212063 (02:29:55.7496635), LayerElapsedSeconds=38.2586711, LayerStreamStats=StreamStats { EdgeCount = 105447, OnTraceLength = 20622.496384710073, AllTraceLength = 26680.671626240015 }, TotalStreamStats=StreamStats { EdgeCount = 33861323, OnTraceLength = 6504314.816949109, AllTraceLength = 14688029.639577003 } [PrintingService.cs@2147] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 348, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.13911935944676, Elapsed = 07:10:03.6133862, TimeTotal = 11:43:24.7514857, Remaining = 04:33:21.1380995, Incomplete = False, SoftCount = 566, LayerPrintDone = 348, WeightsDone = 348, WeightDone = 02:34:21.3943991, WeightTotal = 03:34:50.1505925, WeightTotalEstimate = 03:34:50.1505925, LayerRecoatElapsed = 02:21:03.0431984, LayerRecoatDelays = 00:23:39, LayerRecoatPrintLayersElapsed = 01:38:02.0489057, LayerRecoatNoDelayAverage = 00:00:14.8922689, StreamingElapsed = 02:29:55.7496635, ObjectLayerOverheadAverageDuration = 00:00:00.0219897, TimeLayers = 07:01:07.0931089, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:23.4825881, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:45.9949570, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3840335, JobElapsed = 04:08:05.4516341, JobTotal = 06:17:52.7141184, WeightEstimate = 01:00:28.7561934 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:17:41. coolingEstimate=02:27:23.4825881 [PrintingService.cs@1912] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.13911935944676;StartedAtUtc;07:10:03.6133862;11:43:24.7514857;04:33:21.1380995;False;566;348;348;02:34:21.3943991;03:34:50.1505925;03:34:50.1505925;02:21:03.0431984;00:23:39;01:38:02.0489057;00:00:14.8922689;02:29:55.7496635;00:00:00.0219897;07:01:07.0931089;00:00:00;02:27:23.4825881;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:45.9949570;00:00:00;00:04:28.3840335;04:08:05.4516341;06:17:52.7141184 [PrintingService.cs@1918] +06/28/2026 03:44:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 348. PrevPreviewWeight=LayerWeight { Index = 347, FillTotalRelative = 0.1816046890276704, FillMaxRelative = 0.4243399650251207, TimeFromPreview = 36.19368834747935, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4243399650251207, PreviewWeight=LayerWeight { Index = 348, FillTotalRelative = 0.18190444474184367, FillMaxRelative = 0.426929482438523, TimeFromPreview = 35.25552176097096, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.2933191. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69647222, XYCompressed = 6868157, LSource = 36247869, LCompressed = 1470136 } [McuMovementClient.cs@491] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632717. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.3560363. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69647222, XYCompressed = 6868157, LSource = 36247869, LCompressed = 1470136 } [McuMovementClient.cs@491] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.3709435. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69647222, XYCompressed = 6868157, LSource = 36247869, LCompressed = 1470136 } [McuMovementClient.cs@491] +06/28/2026 03:44:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4109.820739591938, PrevLayerFillRatio=0.4243399650251207: Z1=105.18044581030705, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38889.546248858634, Z2 = 39350 } } [LayerClient.cs@969] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6063015855592 (6063015855592 @ 0) for mcu = 50511.351639 [27/06/2026 01:08:47] (50525.132129933336 sec) to 6066386340378 (from now=6066266340378, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6063015855592 (6063015855592 @ 0) for mcu = 50511.351639 [27/06/2026 01:08:47] (50525.132129933336 sec) to 6066386340378 (from external timestamp, flags=None, requested=6066386340378 (6066386340378 @ 0) for mcu = 50539.439602 [27/06/2026 01:09:15] (50553.21950315 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6063015855592 (6063015855592 @ 0) for mcu = 50511.351639 [27/06/2026 01:08:47] (50525.132129933336 sec) to 6066386340378 (from external timestamp, flags=None, requested=6066386340378 (6066386340378 @ 0) for mcu = 50539.439602 [27/06/2026 01:09:15] (50553.21950315 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:44:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0698021 ~ 5.99 samples/sec, 11 resets, 137 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:44:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0763611. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.5477857. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69647222, XYCompressed = 6868157, LSource = 36247869, LCompressed = 1470136 } [McuMovementClient.cs@491] +06/28/2026 03:44:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:44:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:44:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:44:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 348, Weight=LayerWeight { Index = 348, FillTotalRelative = 0.18190444474184367, FillMaxRelative = 0.426929482438523, TimeFromPreview = 35.25552176097096, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:44:38 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6068440025193, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:44:38 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6068560038858, flushed existing data. Was Timestamp=0, Now=6068440041310, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:44:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:44:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6066252039801 (6066252039801 @ 0) for mcu = 50538.320376 [27/06/2026 01:09:14] (50552.100331675 sec) to 6068560062023 (from now=6068440062023, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6066252063795 (1552960528331717 @ 8) for mcu = 50538.320576 [27/06/2026 01:09:14] (50552.10053163141 sec) to 6068560062023 (from now=6068440062023, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6066252063799 (1552960528332778 @ 8) for mcu = 50538.320576 [27/06/2026 01:09:14] (50552.10053166595 sec) to 6068560062023 (from now=6068440062023, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:38 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:44:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (12 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:44:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:44:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.0968338. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.0968338. Loops = 77. GC duration = 00:00:00.3592228. SinceCollect=00:01:16.8769265. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69806236, XYCompressed = 6878341, LSource = 36329485, LCompressed = 1472761 } [McuMovementClient.cs@478] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=127187, gen1=32471, gen2=919, LatencyMode=Interactive, FreeMemory=5695356928, Live=355426944, HeapSizeBytes=363499664, FragmentedBytes=8576720, TotalCommittedBytes=373407744, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:44:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 348 [PrintingService.cs@2118] +06/28/2026 03:44:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0268709. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69806236, XYCompressed = 6878341, LSource = 36329485, LCompressed = 1472761 } [McuMovementClient.cs@491] +06/28/2026 03:44:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 349, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.26258975126005, Elapsed = 07:10:42.2432248, TimeTotal = 11:43:02.7469745, Remaining = 04:32:20.5037497, Incomplete = False, SoftCount = 566, LayerPrintDone = 349, WeightsDone = 349, WeightDone = 02:34:41.8198111, WeightTotal = 03:34:33.3003836, WeightTotalEstimate = 03:34:33.3003836, LayerRecoatElapsed = 02:21:21.2476250, LayerRecoatDelays = 00:23:42, LayerRecoatPrintLayersElapsed = 01:38:20.2533324, LayerRecoatNoDelayAverage = 00:00:14.8929275, StreamingElapsed = 02:30:16.1530858, ObjectLayerOverheadAverageDuration = 00:00:00.0219897, TimeLayers = 07:00:50.7934710, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:17.7777148, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:46.0805750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3939125, JobElapsed = 04:08:44.0780190, JobTotal = 06:17:36.3189835, WeightEstimate = 00:59:51.4805725 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:17:19. coolingEstimate=02:27:17.7777148 [PrintingService.cs@1912] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.26258975126005;StartedAtUtc;07:10:42.2432248;11:43:02.7469745;04:32:20.5037497;False;566;349;349;02:34:41.8198111;03:34:33.3003836;03:34:33.3003836;02:21:21.2476250;00:23:42;01:38:20.2533324;00:00:14.8929275;02:30:16.1530858;00:00:00.0219897;07:00:50.7934710;00:00:00;02:27:17.7777148;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:46.0805750;00:00:00;00:04:28.3939125;04:08:44.0780190;06:17:36.3189835 [PrintingService.cs@1918] +06/28/2026 03:44:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 348. PreviewWeight=LayerWeight { Index = 348, FillTotalRelative = 0.18190444474184367, FillMaxRelative = 0.426929482438523, TimeFromPreview = 35.25552176097096, EnergyDensityIncreaseFactor = 0 }, FillArea=20074.735669725706, PreviewFillRatio=0.426929482438523, Results=4, StreamingSeconds (preview) = 35.25552176097096, StreamingSeconds (extrapolated) = 36.25363113226613, StreamingSeconds (no overhead) = 20.4034223 (02:30:16.1530858), LayerElapsedSeconds=38.6264232, LayerStreamStats=StreamStats { EdgeCount = 78470, OnTraceLength = 15284.87732078135, AllTraceLength = 20587.315318778157 }, TotalStreamStats=StreamStats { EdgeCount = 33939793, OnTraceLength = 6519599.69426989, AllTraceLength = 14708616.954895781 } [PrintingService.cs@2147] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 349, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.26259192533515, Elapsed = 07:10:42.2405375, TimeTotal = 11:43:02.7410910, Remaining = 04:32:20.5005535, Incomplete = False, SoftCount = 566, LayerPrintDone = 349, WeightsDone = 349, WeightDone = 02:34:41.8171238, WeightTotal = 03:34:33.2960254, WeightTotalEstimate = 03:34:33.2960254, LayerRecoatElapsed = 02:21:21.2476250, LayerRecoatDelays = 00:23:42, LayerRecoatPrintLayersElapsed = 01:38:20.2533324, LayerRecoatNoDelayAverage = 00:00:14.8929275, StreamingElapsed = 02:30:16.1530858, ObjectLayerOverheadAverageDuration = 00:00:00.0219820, TimeLayers = 07:00:50.7891128, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:17.7761895, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:46.0805750, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.3939125, JobElapsed = 04:08:44.0788031, JobTotal = 06:17:36.3146253, WeightEstimate = 00:59:51.4789016 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:17:19. coolingEstimate=02:27:17.7761895 [PrintingService.cs@1912] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.26259192533515;StartedAtUtc;07:10:42.2405375;11:43:02.7410910;04:32:20.5005535;False;566;349;349;02:34:41.8171238;03:34:33.2960254;03:34:33.2960254;02:21:21.2476250;00:23:42;01:38:20.2533324;00:00:14.8929275;02:30:16.1530858;00:00:00.0219820;07:00:50.7891128;00:00:00;02:27:17.7761895;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:46.0805750;00:00:00;00:04:28.3939125;04:08:44.0788031;06:17:36.3146253 [PrintingService.cs@1918] +06/28/2026 03:44:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 349. PrevPreviewWeight=LayerWeight { Index = 348, FillTotalRelative = 0.18190444474184367, FillMaxRelative = 0.426929482438523, TimeFromPreview = 35.25552176097096, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.426929482438523, PreviewWeight=LayerWeight { Index = 349, FillTotalRelative = 0.1813127272740688, FillMaxRelative = 0.42410720571413885, TimeFromPreview = 36.709043507050886, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0440875. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69806236, XYCompressed = 6878341, LSource = 36329485, LCompressed = 1472761 } [McuMovementClient.cs@491] +06/28/2026 03:44:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0621014. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1078295. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69806236, XYCompressed = 6878341, LSource = 36329485, LCompressed = 1472761 } [McuMovementClient.cs@491] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1263824. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69806236, XYCompressed = 6878341, LSource = 36329485, LCompressed = 1472761 } [McuMovementClient.cs@491] +06/28/2026 03:44:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4114.018198762538, PrevLayerFillRatio=0.426929482438523: Z1=105.28786913964628, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 38994.83411799828, Z2 = 39450 } } [LayerClient.cs@969] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6067606093861 (6067606093861 @ 0) for mcu = 50549.604373 [27/06/2026 01:09:25] (50563.384115508336 sec) to 6071022132281 (from now=6070902132281, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6067606093861 (6067606093861 @ 0) for mcu = 50549.604373 [27/06/2026 01:09:25] (50563.384115508336 sec) to 6071022132281 (from external timestamp, flags=None, requested=6071022132281 (6071022132281 @ 0) for mcu = 50578.071931 [27/06/2026 01:09:54] (50591.851102341665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6067606093861 (6067606093861 @ 0) for mcu = 50549.604373 [27/06/2026 01:09:25] (50563.384115508336 sec) to 6071022132281 (from external timestamp, flags=None, requested=6071022132281 (6071022132281 @ 0) for mcu = 50578.071931 [27/06/2026 01:09:54] (50591.851102341665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:44:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:45:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:45:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0768130. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3017207. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 69806236, XYCompressed = 6878341, LSource = 36329485, LCompressed = 1472761 } [McuMovementClient.cs@491] +06/28/2026 03:45:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:45:14 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:45:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:45:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 349, Weight=LayerWeight { Index = 349, FillTotalRelative = 0.1813127272740688, FillMaxRelative = 0.42410720571413885, TimeFromPreview = 36.709043507050886, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:45:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6073069309128, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:45:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6073189316111, flushed existing data. Was Timestamp=0, Now=6073069318536, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:45:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:45:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6070842603405 (6070842603405 @ 0) for mcu = 50576.575845 [27/06/2026 01:09:52] (50590.355028375 sec) to 6073189366160 (from now=6073069366160, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:45:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6070842627404 (1554135712615544 @ 8) for mcu = 50576.576045 [27/06/2026 01:09:52] (50590.35522837057 sec) to 6073189366160 (from now=6073069366160, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:45:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6070842627418 (1554135712619252 @ 8) for mcu = 50576.576045 [27/06/2026 01:09:52] (50590.35522849127 sec) to 6073189366160 (from now=6073069366160, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:45:17 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:45:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:45:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:45:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1477916 ~ 6 samples/sec, 11 resets, 140 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.7315588. Loops = 75. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.2234938. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70019494, XYCompressed = 6897519, LSource = 36438572, LCompressed = 1475696 } [McuMovementClient.cs@491] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:45:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 349 [PrintingService.cs@2118] +06/28/2026 03:45:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.2392444. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70019494, XYCompressed = 6897519, LSource = 36438572, LCompressed = 1475696 } [McuMovementClient.cs@491] +06/28/2026 03:45:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 350, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.38776248311287, Elapsed = 07:11:20.4603059, TimeTotal = 11:42:38.9894452, Remaining = 04:31:18.5291393, Incomplete = False, SoftCount = 566, LayerPrintDone = 350, WeightsDone = 350, WeightDone = 02:35:01.8820611, WeightTotal = 03:34:15.2412548, WeightTotalEstimate = 03:34:15.2412548, LayerRecoatElapsed = 02:21:39.4024561, LayerRecoatDelays = 00:23:45, LayerRecoatPrintLayersElapsed = 01:38:38.4081634, LayerRecoatNoDelayAverage = 00:00:14.8934789, StreamingElapsed = 02:30:36.1960411, ObjectLayerOverheadAverageDuration = 00:00:00.0219820, TimeLayers = 07:00:33.1953011, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:11.6183554, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:46.1522570, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.4021835, JobElapsed = 04:09:22.2898001, JobTotal = 06:17:18.6408606, WeightEstimate = 00:59:13.3591937 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:16:55. coolingEstimate=02:27:11.6183554 [PrintingService.cs@1912] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.38776248311287;StartedAtUtc;07:11:20.4603059;11:42:38.9894452;04:31:18.5291393;False;566;350;350;02:35:01.8820611;03:34:15.2412548;03:34:15.2412548;02:21:39.4024561;00:23:45;01:38:38.4081634;00:00:14.8934789;02:30:36.1960411;00:00:00.0219820;07:00:33.1953011;00:00:00;02:27:11.6183554;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:46.1522570;00:00:00;00:04:28.4021835;04:09:22.2898001;06:17:18.6408606 [PrintingService.cs@1918] +06/28/2026 03:45:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 349. PreviewWeight=LayerWeight { Index = 349, FillTotalRelative = 0.1813127272740688, FillMaxRelative = 0.42410720571413885, TimeFromPreview = 36.709043507050886, EnergyDensityIncreaseFactor = 0 }, FillArea=19381.8638037606, PreviewFillRatio=0.42410720571413885, Results=4, StreamingSeconds (preview) = 36.709043507050886, StreamingSeconds (extrapolated) = 37.097725966232225, StreamingSeconds (no overhead) = 20.0429553 (02:30:36.1960411), LayerElapsedSeconds=38.2111121, LayerStreamStats=StreamStats { EdgeCount = 105433, OnTraceLength = 20621.980432897806, AllTraceLength = 26437.106678426266 }, TotalStreamStats=StreamStats { EdgeCount = 34045226, OnTraceLength = 6540221.674702788, AllTraceLength = 14735054.061574208 } [PrintingService.cs@2147] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 350, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.387768865692394, Elapsed = 07:11:20.4523958, TimeTotal = 11:42:38.9721764, Remaining = 04:31:18.5197806, Incomplete = False, SoftCount = 566, LayerPrintDone = 350, WeightsDone = 350, WeightDone = 02:35:01.8741510, WeightTotal = 03:34:15.2284631, WeightTotalEstimate = 03:34:15.2284632, LayerRecoatElapsed = 02:21:39.4024561, LayerRecoatDelays = 00:23:45, LayerRecoatPrintLayersElapsed = 01:38:38.4081634, LayerRecoatNoDelayAverage = 00:00:14.8934789, StreamingElapsed = 02:30:36.1960411, ObjectLayerOverheadAverageDuration = 00:00:00.0219594, TimeLayers = 07:00:33.1825094, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:11.6138783, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:46.1522570, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.4021835, JobElapsed = 04:09:22.2910506, JobTotal = 06:17:18.6280689, WeightEstimate = 00:59:13.3543122 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:16:55. coolingEstimate=02:27:11.6138783 [PrintingService.cs@1912] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.387768865692394;StartedAtUtc;07:11:20.4523958;11:42:38.9721764;04:31:18.5197806;False;566;350;350;02:35:01.8741510;03:34:15.2284631;03:34:15.2284632;02:21:39.4024561;00:23:45;01:38:38.4081634;00:00:14.8934789;02:30:36.1960411;00:00:00.0219594;07:00:33.1825094;00:00:00;02:27:11.6138783;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:46.1522570;00:00:00;00:04:28.4021835;04:09:22.2910506;06:17:18.6280689 [PrintingService.cs@1918] +06/28/2026 03:45:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 350. PrevPreviewWeight=LayerWeight { Index = 349, FillTotalRelative = 0.1813127272740688, FillMaxRelative = 0.42410720571413885, TimeFromPreview = 36.709043507050886, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42410720571413885, PreviewWeight=LayerWeight { Index = 350, FillTotalRelative = 0.1816283545787276, FillMaxRelative = 0.42664640707353285, TimeFromPreview = 35.31989274502105, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.2534278. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70019494, XYCompressed = 6897519, LSource = 36438572, LCompressed = 1475696 } [McuMovementClient.cs@491] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628422. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.3199945. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70019494, XYCompressed = 6897519, LSource = 36438572, LCompressed = 1475696 } [McuMovementClient.cs@491] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:38.3311313. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70019494, XYCompressed = 6897519, LSource = 36438572, LCompressed = 1475696 } [McuMovementClient.cs@491] +06/28/2026 03:45:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4109.44345010187, PrevLayerFillRatio=0.42410720571413885: Z1=105.17079004201952, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39100.004908040304, Z2 = 39550 } } [LayerClient.cs@969] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6072241839820 (6072241839820 @ 0) for mcu = 50588.236424 [27/06/2026 01:10:04] (50602.01533183333 sec) to 6075606620350 (from now=6075486620350, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6072241839820 (6072241839820 @ 0) for mcu = 50588.236424 [27/06/2026 01:10:04] (50602.01533183333 sec) to 6075606620350 (from external timestamp, flags=None, requested=6075606620350 (6075606620350 @ 0) for mcu = 50616.276857 [27/06/2026 01:10:32] (50630.055169583335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6072241839820 (6072241839820 @ 0) for mcu = 50588.236424 [27/06/2026 01:10:04] (50602.01533183333 sec) to 6075606620350 (from external timestamp, flags=None, requested=6075606620350 (6075606620350 @ 0) for mcu = 50616.276857 [27/06/2026 01:10:32] (50630.055169583335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:45:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:45:44 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (84 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:45:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0737903. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.5070431. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70019494, XYCompressed = 6897519, LSource = 36438572, LCompressed = 1475696 } [McuMovementClient.cs@491] +06/28/2026 03:45:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:46:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:46:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:46:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 350, Weight=LayerWeight { Index = 350, FillTotalRelative = 0.1816283545787276, FillMaxRelative = 0.42664640707353285, TimeFromPreview = 35.31989274502105, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:46:03 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6078661352472, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:46:03 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6078781356648, flushed existing data. Was Timestamp=0, Now=6078661359188, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:46:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:46:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6075472317927 (6075472317927 @ 0) for mcu = 50615.157641 [27/06/2026 01:10:31] (50628.935982725 sec) to 6078781527483 (from now=6078661527483, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6075472341932 (1555320919534724 @ 8) for mcu = 50615.157841 [27/06/2026 01:10:31] (50628.936182770965 sec) to 6078781527483 (from now=6078661527483, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6075472341913 (1555320919529816 @ 8) for mcu = 50615.157841 [27/06/2026 01:10:31] (50628.9361826112 sec) to 6078781527483 (from now=6078661527483, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:03 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:46:04 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:46:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.1915244. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.1915244. Loops = 77. GC duration = 00:00:00.3568189. SinceCollect=00:01:25.1719057. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70178586, XYCompressed = 6907754, LSource = 36520212, LCompressed = 1478351 } [McuMovementClient.cs@478] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=127402, gen1=32614, gen2=920, LatencyMode=Interactive, FreeMemory=5668995072, Live=360762744, HeapSizeBytes=370409240, FragmentedBytes=10232712, TotalCommittedBytes=382337024, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:46:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 350 [PrintingService.cs@2118] +06/28/2026 03:46:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0213374. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70178586, XYCompressed = 6907754, LSource = 36520212, LCompressed = 1478351 } [McuMovementClient.cs@491] +06/28/2026 03:46:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 351, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.50608775065719, Elapsed = 07:12:07.4073299, TimeTotal = 11:42:34.2131488, Remaining = 04:30:26.8058189, Incomplete = False, SoftCount = 566, LayerPrintDone = 351, WeightsDone = 351, WeightDone = 02:35:22.2847692, WeightTotal = 03:33:56.5097805, WeightTotalEstimate = 03:33:56.5097806, LayerRecoatElapsed = 02:22:05.9467720, LayerRecoatDelays = 00:23:48, LayerRecoatPrintLayersElapsed = 01:39:04.9524793, LayerRecoatNoDelayAverage = 00:00:14.9116529, StreamingElapsed = 02:30:56.5846999, ObjectLayerOverheadAverageDuration = 00:00:00.0219594, TimeLayers = 07:00:29.6573038, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:10.3800563, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.5148770, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6747935, JobElapsed = 04:10:09.2472266, JobTotal = 06:17:12.4676333, WeightEstimate = 00:58:34.2250114 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:16:50. coolingEstimate=02:27:10.3800563 [PrintingService.cs@1912] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.50608775065719;StartedAtUtc;07:12:07.4073299;11:42:34.2131488;04:30:26.8058189;False;566;351;351;02:35:22.2847692;03:33:56.5097805;03:33:56.5097806;02:22:05.9467720;00:23:48;01:39:04.9524793;00:00:14.9116529;02:30:56.5846999;00:00:00.0219594;07:00:29.6573038;00:00:00;02:27:10.3800563;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.5148770;00:00:00;00:04:28.6747935;04:10:09.2472266;06:17:12.4676333 [PrintingService.cs@1918] +06/28/2026 03:46:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 350. PreviewWeight=LayerWeight { Index = 350, FillTotalRelative = 0.1816283545787276, FillMaxRelative = 0.42664640707353285, TimeFromPreview = 35.31989274502105, EnergyDensityIncreaseFactor = 0 }, FillArea=17947.93733723458, PreviewFillRatio=0.42664640707353285, Results=4, StreamingSeconds (preview) = 35.31989274502105, StreamingSeconds (extrapolated) = 38.10734135576994, StreamingSeconds (no overhead) = 20.3886588 (02:30:56.5846999), LayerElapsedSeconds=46.9575245, LayerStreamStats=StreamStats { EdgeCount = 78495, OnTraceLength = 15287.627295166254, AllTraceLength = 20646.36505755782 }, TotalStreamStats=StreamStats { EdgeCount = 34123721, OnTraceLength = 6555509.301997954, AllTraceLength = 14755700.426631765 } [PrintingService.cs@2147] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 351, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.50608470264246, Elapsed = 07:12:07.4111207, TimeTotal = 11:42:34.2214011, Remaining = 04:30:26.8102804, Incomplete = False, SoftCount = 566, LayerPrintDone = 351, WeightsDone = 351, WeightDone = 02:35:22.2885600, WeightTotal = 03:33:56.5158933, WeightTotalEstimate = 03:33:56.5158934, LayerRecoatElapsed = 02:22:05.9467720, LayerRecoatDelays = 00:23:48, LayerRecoatPrintLayersElapsed = 01:39:04.9524793, LayerRecoatNoDelayAverage = 00:00:14.9116529, StreamingElapsed = 02:30:56.5846999, ObjectLayerOverheadAverageDuration = 00:00:00.0219702, TimeLayers = 07:00:29.6634166, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:10.3821958, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.5148770, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6747935, JobElapsed = 04:10:09.2529682, JobTotal = 06:17:12.4737461, WeightEstimate = 00:58:34.2273334 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:16:50. coolingEstimate=02:27:10.3821958 [PrintingService.cs@1912] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.50608470264246;StartedAtUtc;07:12:07.4111207;11:42:34.2214011;04:30:26.8102804;False;566;351;351;02:35:22.2885600;03:33:56.5158933;03:33:56.5158934;02:22:05.9467720;00:23:48;01:39:04.9524793;00:00:14.9116529;02:30:56.5846999;00:00:00.0219702;07:00:29.6634166;00:00:00;02:27:10.3821958;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.5148770;00:00:00;00:04:28.6747935;04:10:09.2529682;06:17:12.4737461 [PrintingService.cs@1918] +06/28/2026 03:46:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 351. PrevPreviewWeight=LayerWeight { Index = 350, FillTotalRelative = 0.1816283545787276, FillMaxRelative = 0.42664640707353285, TimeFromPreview = 35.31989274502105, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42664640707353285, PreviewWeight=LayerWeight { Index = 351, FillTotalRelative = 0.1809910967272149, FillMaxRelative = 0.4238201585274243, TimeFromPreview = 36.02328350078149, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0868451. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70178586, XYCompressed = 6907754, LSource = 36520212, LCompressed = 1478351 } [McuMovementClient.cs@491] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0626115. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1515644. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70178586, XYCompressed = 6907754, LSource = 36520212, LCompressed = 1478351 } [McuMovementClient.cs@491] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1657959. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70178586, XYCompressed = 6907754, LSource = 36520212, LCompressed = 1478351 } [McuMovementClient.cs@491] +06/28/2026 03:46:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4113.5593498354765, PrevLayerFillRatio=0.42664640707353285: Z1=105.27612606427488, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39205.28103410458, Z2 = 39650 } } [LayerClient.cs@969] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6076826334380 (6076826334380 @ 0) for mcu = 50626.441295 [27/06/2026 01:10:42] (50640.21945316667 sec) to 6081247287632 (from now=6081127287632, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6076826334380 (6076826334380 @ 0) for mcu = 50626.441295 [27/06/2026 01:10:42] (50640.21945316667 sec) to 6081247287632 (from external timestamp, flags=None, requested=6081247287632 (6081247287632 @ 0) for mcu = 50663.283299 [27/06/2026 01:11:19] (50677.06073026667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6076826334380 (6076826334380 @ 0) for mcu = 50626.441295 [27/06/2026 01:10:42] (50640.21945316667 sec) to 6081247287632 (from external timestamp, flags=None, requested=6081247287632 (6081247287632 @ 0) for mcu = 50663.283299 [27/06/2026 01:11:19] (50677.06073026667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:46:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:28 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0952910 ~ 6.01 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:46:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0686249. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3413763. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70178586, XYCompressed = 6907754, LSource = 36520212, LCompressed = 1478351 } [McuMovementClient.cs@491] +06/28/2026 03:46:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:46:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:46:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:46:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 351, Weight=LayerWeight { Index = 351, FillTotalRelative = 0.1809910967272149, FillMaxRelative = 0.4238201585274243, TimeFromPreview = 36.02328350078149, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:46:38 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6082830783841, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:46:38 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6082950794034, flushed existing data. Was Timestamp=0, Now=6082830796472, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:46:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:46:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6081063335962 (6081063335962 @ 0) for mcu = 50661.750375 [27/06/2026 01:11:17] (50675.52779968333 sec) to 6082951355391 (from now=6082831355391, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6081063359953 (1556752220148179 @ 8) for mcu = 50661.750575 [27/06/2026 01:11:17] (50675.5279996152 sec) to 6082951355391 (from now=6082831355391, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6081063360003 (1556752220160999 @ 8) for mcu = 50661.750576 [27/06/2026 01:11:17] (50675.52800003252 sec) to 6082951355391 (from now=6082831355391, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:38 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:46:39 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:46:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 133.75 [HeaterCheck.cs@111] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.9724437. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4667356. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70391826, XYCompressed = 6926901, LSource = 36629294, LCompressed = 1481229 } [McuMovementClient.cs@491] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:46:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 351 [PrintingService.cs@2118] +06/28/2026 03:46:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4797065. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70391826, XYCompressed = 6926901, LSource = 36629294, LCompressed = 1481229 } [McuMovementClient.cs@491] +06/28/2026 03:46:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 352, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.63555403357124, Elapsed = 07:12:41.8294555, TimeTotal = 11:42:01.5155158, Remaining = 04:29:19.6860603, Incomplete = False, SoftCount = 566, LayerPrintDone = 352, WeightsDone = 352, WeightDone = 02:35:42.4254111, WeightTotal = 03:33:38.6516145, WeightTotalEstimate = 03:33:38.6516146, LayerRecoatElapsed = 02:22:20.2282557, LayerRecoatDelays = 00:23:51, LayerRecoatPrintLayersElapsed = 01:39:19.2339629, LayerRecoatNoDelayAverage = 00:00:14.9040425, StreamingElapsed = 02:31:16.6995808, ObjectLayerOverheadAverageDuration = 00:00:00.0219702, TimeLayers = 07:00:05.4368349, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:01.9028922, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:47.5255250, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.5606375, JobElapsed = 04:10:43.7028059, JobTotal = 06:16:49.3506724, WeightEstimate = 00:57:56.2262035 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:16:18. coolingEstimate=02:27:01.9028922 [PrintingService.cs@1912] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.63555403357124;StartedAtUtc;07:12:41.8294555;11:42:01.5155158;04:29:19.6860603;False;566;352;352;02:35:42.4254111;03:33:38.6516145;03:33:38.6516146;02:22:20.2282557;00:23:51;01:39:19.2339629;00:00:14.9040425;02:31:16.6995808;00:00:00.0219702;07:00:05.4368349;00:00:00;02:27:01.9028922;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:47.5255250;00:00:00;00:04:28.5606375;04:10:43.7028059;06:16:49.3506724 [PrintingService.cs@1918] +06/28/2026 03:46:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 351. PreviewWeight=LayerWeight { Index = 351, FillTotalRelative = 0.1809910967272149, FillMaxRelative = 0.4238201585274243, TimeFromPreview = 36.02328350078149, EnergyDensityIncreaseFactor = 0 }, FillArea=20206.01281877688, PreviewFillRatio=0.4238201585274243, Results=4, StreamingSeconds (preview) = 36.02328350078149, StreamingSeconds (extrapolated) = 36.97915970030046, StreamingSeconds (no overhead) = 20.1148809 (02:31:16.6995808), LayerElapsedSeconds=34.4101694, LayerStreamStats=StreamStats { EdgeCount = 105428, OnTraceLength = 20618.541194200516, AllTraceLength = 26561.95821080357 }, TotalStreamStats=StreamStats { EdgeCount = 34229149, OnTraceLength = 6576127.843192155, AllTraceLength = 14782262.384842569 } [PrintingService.cs@2147] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 352, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.63552517089188, Elapsed = 07:12:41.8654299, TimeTotal = 11:42:01.5936068, Remaining = 04:29:19.7281769, Incomplete = False, SoftCount = 566, LayerPrintDone = 352, WeightsDone = 352, WeightDone = 02:35:42.4613855, WeightTotal = 03:33:38.7094597, WeightTotalEstimate = 03:33:38.7094598, LayerRecoatElapsed = 02:22:20.2282557, LayerRecoatDelays = 00:23:51, LayerRecoatPrintLayersElapsed = 01:39:19.2339629, LayerRecoatNoDelayAverage = 00:00:14.9040425, StreamingElapsed = 02:31:16.6995808, ObjectLayerOverheadAverageDuration = 00:00:00.0220724, TimeLayers = 07:00:05.4946801, CoolingElapsed = 00:00:00, CoolingEstimate = 02:27:01.9231380, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:47.5255250, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.5606375, JobElapsed = 04:10:43.7073338, JobTotal = 06:16:49.4085176, WeightEstimate = 00:57:56.2480743 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:16:18. coolingEstimate=02:27:01.9231380 [PrintingService.cs@1912] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.63552517089188;StartedAtUtc;07:12:41.8654299;11:42:01.5936068;04:29:19.7281769;False;566;352;352;02:35:42.4613855;03:33:38.7094597;03:33:38.7094598;02:22:20.2282557;00:23:51;01:39:19.2339629;00:00:14.9040425;02:31:16.6995808;00:00:00.0220724;07:00:05.4946801;00:00:00;02:27:01.9231380;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:47.5255250;00:00:00;00:04:28.5606375;04:10:43.7073338;06:16:49.4085176 [PrintingService.cs@1918] +06/28/2026 03:46:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 352. PrevPreviewWeight=LayerWeight { Index = 351, FillTotalRelative = 0.1809910967272149, FillMaxRelative = 0.4238201585274243, TimeFromPreview = 36.02328350078149, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4238201585274243, PreviewWeight=LayerWeight { Index = 352, FillTotalRelative = 0.18128245452456163, FillMaxRelative = 0.42639445094046935, TimeFromPreview = 35.10649784359604, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.5014153. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70391826, XYCompressed = 6926901, LSource = 36629294, LCompressed = 1481229 } [McuMovementClient.cs@491] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633898. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.5633520. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70391826, XYCompressed = 6926901, LSource = 36629294, LCompressed = 1481229 } [McuMovementClient.cs@491] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.5761294. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70391826, XYCompressed = 6926901, LSource = 36629294, LCompressed = 1481229 } [McuMovementClient.cs@491] +06/28/2026 03:46:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4108.978163079651, PrevLayerFillRatio=0.4238201585274243: Z1=105.15888219991939, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39310.439916304495, Z2 = 39750 } } [LayerClient.cs@969] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6082467012384 (6082467012384 @ 0) for mcu = 50673.447972 [27/06/2026 01:11:29] (50687.2251032 sec) to 6085376441622 (from now=6085256441622, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6082467012384 (6082467012384 @ 0) for mcu = 50673.447972 [27/06/2026 01:11:29] (50687.2251032 sec) to 6085376441622 (from external timestamp, flags=None, requested=6085376441622 (6085376441622 @ 0) for mcu = 50697.693740 [27/06/2026 01:11:53] (50711.47034685 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6082467012384 (6082467012384 @ 0) for mcu = 50673.447972 [27/06/2026 01:11:29] (50687.2251032 sec) to 6085376441622 (from external timestamp, flags=None, requested=6085376441622 (6085376441622 @ 0) for mcu = 50697.693740 [27/06/2026 01:11:53] (50711.47034685 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:46:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:47:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0831886. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:45.7518920. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70391826, XYCompressed = 6926901, LSource = 36629294, LCompressed = 1481229 } [McuMovementClient.cs@491] +06/28/2026 03:47:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:47:09 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:47:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:47:12 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 352, Weight=LayerWeight { Index = 352, FillTotalRelative = 0.18128245452456163, FillMaxRelative = 0.42639445094046935, TimeFromPreview = 35.10649784359604, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:47:12 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6086964701002, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:47:12 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6087084706292, flushed existing data. Was Timestamp=0, Now=6086964708816, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:47:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:47:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6085241441710 (6085241441710 @ 0) for mcu = 50696.568690 [27/06/2026 01:11:52] (50710.34534758333 sec) to 6087084720342 (from now=6086964720342, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:47:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6085241465675 (1557821815213036 @ 8) for mcu = 50696.568890 [27/06/2026 01:11:52] (50710.34554729935 sec) to 6087084720342 (from now=6086964720342, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:47:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6085241465725 (1557821815225650 @ 8) for mcu = 50696.568890 [27/06/2026 01:11:52] (50710.34554770996 sec) to 6087084720342 (from now=6086964720342, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:47:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (164 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:47:13 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:47:13 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:47:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:47:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 03:47:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 03:47:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 03:47:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 03:47:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 03:47:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 03:47:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0898566 ~ 6.01 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:47:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.0505967. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:47:33 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:19.0505967. Loops = 77. GC duration = 00:00:01.4301010. SinceCollect=00:01:10.2426920. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70550868, XYCompressed = 6936987, LSource = 36710913, LCompressed = 1483838 } [McuMovementClient.cs@478] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=127576, gen1=32714, gen2=922, LatencyMode=Interactive, FreeMemory=5782192128, Live=358692856, HeapSizeBytes=358412592, FragmentedBytes=467704, TotalCommittedBytes=359907328, PinnedObjectsCount=1, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:47:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 352 [PrintingService.cs@2118] +06/28/2026 03:47:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0132056. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70550868, XYCompressed = 6936987, LSource = 36710913, LCompressed = 1483838 } [McuMovementClient.cs@491] +06/28/2026 03:47:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 353, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.76391467442397, Elapsed = 07:13:17.6435235, TimeTotal = 11:41:31.9620470, Remaining = 04:28:14.3185235, Incomplete = False, SoftCount = 566, LayerPrintDone = 353, WeightsDone = 353, WeightDone = 02:36:03.9176473, WeightTotal = 03:33:23.0252902, WeightTotalEstimate = 03:33:23.0252903, LayerRecoatElapsed = 02:22:34.5500875, LayerRecoatDelays = 00:23:54, LayerRecoatPrintLayersElapsed = 01:39:33.5557949, LayerRecoatNoDelayAverage = 00:00:14.8965483, StreamingElapsed = 02:31:38.1337702, ObjectLayerOverheadAverageDuration = 00:00:00.0220724, TimeLayers = 06:59:43.5453765, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:54.2408818, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:46.5512790, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.4482245, JobElapsed = 04:11:19.4796021, JobTotal = 06:16:28.5458730, WeightEstimate = 00:57:19.1076430 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:15:48. coolingEstimate=02:26:54.2408818 [PrintingService.cs@1912] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.76391467442397;StartedAtUtc;07:13:17.6435235;11:41:31.9620470;04:28:14.3185235;False;566;353;353;02:36:03.9176473;03:33:23.0252902;03:33:23.0252903;02:22:34.5500875;00:23:54;01:39:33.5557949;00:00:14.8965483;02:31:38.1337702;00:00:00.0220724;06:59:43.5453765;00:00:00;02:26:54.2408818;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:46.5512790;00:00:00;00:04:28.4482245;04:11:19.4796021;06:16:28.5458730 [PrintingService.cs@1918] +06/28/2026 03:47:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 352. PreviewWeight=LayerWeight { Index = 352, FillTotalRelative = 0.18128245452456163, FillMaxRelative = 0.42639445094046935, TimeFromPreview = 35.10649784359604, EnergyDensityIncreaseFactor = 0 }, FillArea=20036.006772837507, PreviewFillRatio=0.42639445094046935, Results=4, StreamingSeconds (preview) = 35.10649784359604, StreamingSeconds (extrapolated) = 36.118358937989825, StreamingSeconds (no overhead) = 21.4341894 (02:31:38.1337702), LayerElapsedSeconds=35.7718982, LayerStreamStats=StreamStats { EdgeCount = 78481, OnTraceLength = 15287.18370065093, AllTraceLength = 20400.72020086646 }, TotalStreamStats=StreamStats { EdgeCount = 34307630, OnTraceLength = 6591415.0268928055, AllTraceLength = 14802663.105043435 } [PrintingService.cs@2147] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 353, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.76391577654158, Elapsed = 07:13:17.6421469, TimeTotal = 11:41:31.9590671, Remaining = 04:28:14.3169202, Incomplete = False, SoftCount = 566, LayerPrintDone = 353, WeightsDone = 353, WeightDone = 02:36:03.9162707, WeightTotal = 03:33:23.0230829, WeightTotalEstimate = 03:33:23.0230829, LayerRecoatElapsed = 02:22:34.5500875, LayerRecoatDelays = 00:23:54, LayerRecoatPrintLayersElapsed = 01:39:33.5557949, LayerRecoatNoDelayAverage = 00:00:14.8965483, StreamingElapsed = 02:31:38.1337702, ObjectLayerOverheadAverageDuration = 00:00:00.0220685, TimeLayers = 06:59:43.5431692, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:54.2401092, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:46.5512790, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.4482245, JobElapsed = 04:11:19.4817446, JobTotal = 06:16:28.5436657, WeightEstimate = 00:57:19.1068122 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:15:48. coolingEstimate=02:26:54.2401092 [PrintingService.cs@1912] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.76391577654158;StartedAtUtc;07:13:17.6421469;11:41:31.9590671;04:28:14.3169202;False;566;353;353;02:36:03.9162707;03:33:23.0230829;03:33:23.0230829;02:22:34.5500875;00:23:54;01:39:33.5557949;00:00:14.8965483;02:31:38.1337702;00:00:00.0220685;06:59:43.5431692;00:00:00;02:26:54.2401092;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:46.5512790;00:00:00;00:04:28.4482245;04:11:19.4817446;06:16:28.5436657 [PrintingService.cs@1918] +06/28/2026 03:47:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 353. PrevPreviewWeight=LayerWeight { Index = 352, FillTotalRelative = 0.18128245452456163, FillMaxRelative = 0.42639445094046935, TimeFromPreview = 35.10649784359604, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42639445094046935, PreviewWeight=LayerWeight { Index = 353, FillTotalRelative = 0.18071235187847845, FillMaxRelative = 0.4233328375027504, TimeFromPreview = 35.996284234515244, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0299751. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70550868, XYCompressed = 6936987, LSource = 36710913, LCompressed = 1483838 } [McuMovementClient.cs@491] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633705. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0934411. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70550868, XYCompressed = 6936987, LSource = 36710913, LCompressed = 1483838 } [McuMovementClient.cs@491] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1055017. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70550868, XYCompressed = 6936987, LSource = 36710913, LCompressed = 1483838 } [McuMovementClient.cs@491] +06/28/2026 03:47:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4113.1509433981055, PrevLayerFillRatio=0.42639445094046935: Z1=105.26567393658456, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39415.70559024108, Z2 = 39850 } } [LayerClient.cs@969] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6086596195271 (6086596195271 @ 0) for mcu = 50707.858575 [27/06/2026 01:12:03] (50721.63496059167 sec) to 6089669005575 (from now=6089549005575, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6086596195271 (6086596195271 @ 0) for mcu = 50707.858575 [27/06/2026 01:12:03] (50721.63496059167 sec) to 6089669005575 (from external timestamp, flags=None, requested=6089669005575 (6089669005575 @ 0) for mcu = 50733.465890 [27/06/2026 01:12:29] (50747.241713125 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6086596195271 (6086596195271 @ 0) for mcu = 50707.858575 [27/06/2026 01:12:03] (50721.63496059167 sec) to 6089669005575 (from external timestamp, flags=None, requested=6089669005575 (6089669005575 @ 0) for mcu = 50733.465890 [27/06/2026 01:12:29] (50747.241713125 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:47:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0796167. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2806075. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70550868, XYCompressed = 6936987, LSource = 36710913, LCompressed = 1483838 } [McuMovementClient.cs@491] +06/28/2026 03:47:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:47:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:48:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:48:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 353, Weight=LayerWeight { Index = 353, FillTotalRelative = 0.18071235187847845, FillMaxRelative = 0.4233328375027504, TimeFromPreview = 35.996284234515244, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:48:01 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6092812078680, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:48:01 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6092932085352, flushed existing data. Was Timestamp=0, Now=6092812087771, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:48:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:48:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6089363195781 (6089363195781 @ 0) for mcu = 50730.917322 [27/06/2026 01:12:26] (50744.693298175 sec) to 6092932170530 (from now=6092812170530, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6089363219786 (1558876984265344 @ 8) for mcu = 50730.917522 [27/06/2026 01:12:26] (50744.69349822083 sec) to 6092932170530 (from now=6092812170530, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6089363219780 (1558876984263828 @ 8) for mcu = 50730.917522 [27/06/2026 01:12:26] (50744.69349817149 sec) to 6092932170530 (from now=6092812170530, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:01 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:48:02 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:48:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.7435787. Loops = 75. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3572234. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70764182, XYCompressed = 6956112, LSource = 36820026, LCompressed = 1486749 } [McuMovementClient.cs@491] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:48:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 353 [PrintingService.cs@2118] +06/28/2026 03:48:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3780033. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70764182, XYCompressed = 6956112, LSource = 36820026, LCompressed = 1486749 } [McuMovementClient.cs@491] +06/28/2026 03:48:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 354, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.879613131042134, Elapsed = 07:14:05.0113852, TimeTotal = 11:41:29.8096600, Remaining = 04:27:24.7982748, Incomplete = False, SoftCount = 566, LayerPrintDone = 354, WeightsDone = 354, WeightDone = 02:36:24.0086972, WeightTotal = 03:33:05.0595350, WeightTotalEstimate = 03:33:05.0595350, LayerRecoatElapsed = 02:23:01.8268993, LayerRecoatDelays = 00:23:57, LayerRecoatPrintLayersElapsed = 01:40:00.8326067, LayerRecoatNoDelayAverage = 00:00:14.9161313, StreamingElapsed = 02:31:58.2041282, ObjectLayerOverheadAverageDuration = 00:00:00.0220685, TimeLayers = 06:59:41.9510158, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:53.6828555, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:49.0970690, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7419695, JobElapsed = 04:12:06.8439640, JobTotal = 06:16:24.1119773, WeightEstimate = 00:56:41.0508378 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:15:46. coolingEstimate=02:26:53.6828555 [PrintingService.cs@1912] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.879613131042134;StartedAtUtc;07:14:05.0113852;11:41:29.8096600;04:27:24.7982748;False;566;354;354;02:36:24.0086972;03:33:05.0595350;03:33:05.0595350;02:23:01.8268993;00:23:57;01:40:00.8326067;00:00:14.9161313;02:31:58.2041282;00:00:00.0220685;06:59:41.9510158;00:00:00;02:26:53.6828555;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:49.0970690;00:00:00;00:04:28.7419695;04:12:06.8439640;06:16:24.1119773 [PrintingService.cs@1918] +06/28/2026 03:48:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 353. PreviewWeight=LayerWeight { Index = 353, FillTotalRelative = 0.18071235187847845, FillMaxRelative = 0.4233328375027504, TimeFromPreview = 35.996284234515244, EnergyDensityIncreaseFactor = 0 }, FillArea=19349.049471460356, PreviewFillRatio=0.4233328375027504, Results=4, StreamingSeconds (preview) = 35.996284234515244, StreamingSeconds (extrapolated) = 37.03390589602037, StreamingSeconds (no overhead) = 20.070358 (02:31:58.2041282), LayerElapsedSeconds=47.3615771, LayerStreamStats=StreamStats { EdgeCount = 105459, OnTraceLength = 20623.994778990746, AllTraceLength = 26542.997887939215 }, TotalStreamStats=StreamStats { EdgeCount = 34413089, OnTraceLength = 6612039.021671796, AllTraceLength = 14829206.102931375 } [PrintingService.cs@2147] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 354, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 61.87961688558025, Elapsed = 07:14:05.0066769, TimeTotal = 11:41:29.7994974, Remaining = 04:27:24.7928205, Incomplete = False, SoftCount = 566, LayerPrintDone = 354, WeightsDone = 354, WeightDone = 02:36:24.0039889, WeightTotal = 03:33:05.0520071, WeightTotalEstimate = 03:33:05.0520072, LayerRecoatElapsed = 02:23:01.8268993, LayerRecoatDelays = 00:23:57, LayerRecoatPrintLayersElapsed = 01:40:00.8326067, LayerRecoatNoDelayAverage = 00:00:14.9161313, StreamingElapsed = 02:31:58.2041282, ObjectLayerOverheadAverageDuration = 00:00:00.0220552, TimeLayers = 06:59:41.9434879, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:53.6802208, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:49.0970690, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7419695, JobElapsed = 04:12:06.8459307, JobTotal = 06:16:24.1044494, WeightEstimate = 00:56:41.0480183 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:15:46. coolingEstimate=02:26:53.6802208 [PrintingService.cs@1912] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 61.87961688558025;StartedAtUtc;07:14:05.0066769;11:41:29.7994974;04:27:24.7928205;False;566;354;354;02:36:24.0039889;03:33:05.0520071;03:33:05.0520072;02:23:01.8268993;00:23:57;01:40:00.8326067;00:00:14.9161313;02:31:58.2041282;00:00:00.0220552;06:59:41.9434879;00:00:00;02:26:53.6802208;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:49.0970690;00:00:00;00:04:28.7419695;04:12:06.8459307;06:16:24.1044494 [PrintingService.cs@1918] +06/28/2026 03:48:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 354. PrevPreviewWeight=LayerWeight { Index = 353, FillTotalRelative = 0.18071235187847845, FillMaxRelative = 0.4233328375027504, TimeFromPreview = 35.996284234515244, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4233328375027504, PreviewWeight=LayerWeight { Index = 354, FillTotalRelative = 0.18106939239815237, FillMaxRelative = 0.42592093437948714, TimeFromPreview = 35.409369156114025, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3939932. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70764182, XYCompressed = 6956112, LSource = 36820026, LCompressed = 1486749 } [McuMovementClient.cs@491] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627876. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.4565223. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70764182, XYCompressed = 6956112, LSource = 36820026, LCompressed = 1486749 } [McuMovementClient.cs@491] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.4703152. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70764182, XYCompressed = 6956112, LSource = 36820026, LCompressed = 1486749 } [McuMovementClient.cs@491] +06/28/2026 03:48:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4108.188243655492, PrevLayerFillRatio=0.4233328375027504: Z1=105.13866621424712, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39520.844256455326, Z2 = 39950 } } [LayerClient.cs@969] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6090888716904 (6090888716904 @ 0) for mcu = 50743.630306 [27/06/2026 01:12:39] (50757.4059742 sec) to 6095352676181 (from now=6095232676181, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6090888716904 (6090888716904 @ 0) for mcu = 50743.630306 [27/06/2026 01:12:39] (50757.4059742 sec) to 6095352676181 (from external timestamp, flags=None, requested=6095352676181 (6095352676181 @ 0) for mcu = 50780.830771 [27/06/2026 01:13:16] (50794.60563484167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6090888716904 (6090888716904 @ 0) for mcu = 50743.630306 [27/06/2026 01:12:39] (50757.4059742 sec) to 6095352676181 (from external timestamp, flags=None, requested=6095352676181 (6095352676181 @ 0) for mcu = 50780.830771 [27/06/2026 01:13:16] (50794.60563484167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:48:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (52 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:48:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:48:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.1424416 ~ 5.95 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:48:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0801443. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.6446332. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70764182, XYCompressed = 6956112, LSource = 36820026, LCompressed = 1486749 } [McuMovementClient.cs@491] +06/28/2026 03:48:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:48:33 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:48:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:48:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 354, Weight=LayerWeight { Index = 354, FillTotalRelative = 0.18106939239815237, FillMaxRelative = 0.42592093437948714, TimeFromPreview = 35.409369156114025, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:48:36 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6096936582578, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:48:36 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6097056586932, flushed existing data. Was Timestamp=0, Now=6096936589403, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:48:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6095217653710 (6095217653710 @ 0) for mcu = 50779.705505 [27/06/2026 01:13:15] (50793.48044758333 sec) to 6097056634797 (from now=6096936634797, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6095217677725 (1560375725497612 @ 8) for mcu = 50779.705705 [27/06/2026 01:13:15] (50793.480647708726 sec) to 6097056634797 (from now=6096936634797, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6095217677706 (1560375725492759 @ 8) for mcu = 50779.705705 [27/06/2026 01:13:15] (50793.48064755075 sec) to 6097056634797 (from now=6096936634797, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:36 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:48:36 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:48:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.0577885. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.0577885. Loops = 77. GC duration = 00:00:00.5195043. SinceCollect=00:01:22.1583122. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70923268, XYCompressed = 6966334, LSource = 36901665, LCompressed = 1489390 } [McuMovementClient.cs@478] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=127778, gen1=32739, gen2=923, LatencyMode=Interactive, FreeMemory=5732417536, Live=356258072, HeapSizeBytes=369001600, FragmentedBytes=13356032, TotalCommittedBytes=378109952, PinnedObjectsCount=26, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:48:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 354 [PrintingService.cs@2118] +06/28/2026 03:48:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0141497. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70923268, XYCompressed = 6966334, LSource = 36901665, LCompressed = 1489390 } [McuMovementClient.cs@491] +06/28/2026 03:48:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 355, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.008062072957095, Elapsed = 07:14:39.8060711, TimeTotal = 11:40:58.7342988, Remaining = 04:26:18.9282277, Incomplete = False, SoftCount = 566, LayerPrintDone = 355, WeightsDone = 355, WeightDone = 02:36:44.5175581, WeightTotal = 03:32:48.3635188, WeightTotalEstimate = 03:32:48.3635189, LayerRecoatElapsed = 02:23:16.1127243, LayerRecoatDelays = 00:24:00, LayerRecoatPrintLayersElapsed = 01:40:15.1184317, LayerRecoatNoDelayAverage = 00:00:14.9085682, StreamingElapsed = 02:32:18.6956422, ObjectLayerOverheadAverageDuration = 00:00:00.0220552, TimeLayers = 06:59:18.9322297, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:45.6262804, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.1138660, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6285230, JobElapsed = 04:12:41.6381321, JobTotal = 06:16:02.1898407, WeightEstimate = 00:56:03.8459608 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:15:15. coolingEstimate=02:26:45.6262804 [PrintingService.cs@1912] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.008062072957095;StartedAtUtc;07:14:39.8060711;11:40:58.7342988;04:26:18.9282277;False;566;355;355;02:36:44.5175581;03:32:48.3635188;03:32:48.3635189;02:23:16.1127243;00:24:00;01:40:15.1184317;00:00:14.9085682;02:32:18.6956422;00:00:00.0220552;06:59:18.9322297;00:00:00;02:26:45.6262804;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.1138660;00:00:00;00:04:28.6285230;04:12:41.6381321;06:16:02.1898407 [PrintingService.cs@1918] +06/28/2026 03:48:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 354. PreviewWeight=LayerWeight { Index = 354, FillTotalRelative = 0.18106939239815237, FillMaxRelative = 0.42592093437948714, TimeFromPreview = 35.409369156114025, EnergyDensityIncreaseFactor = 0 }, FillArea=17917.500418880678, PreviewFillRatio=0.42592093437948714, Results=4, StreamingSeconds (preview) = 35.409369156114025, StreamingSeconds (extrapolated) = 36.18000221983692, StreamingSeconds (no overhead) = 20.491514 (02:32:18.6956422), LayerElapsedSeconds=34.792046, LayerStreamStats=StreamStats { EdgeCount = 78501, OnTraceLength = 15289.887201711535, AllTraceLength = 20378.088684424758 }, TotalStreamStats=StreamStats { EdgeCount = 34491590, OnTraceLength = 6627328.908873508, AllTraceLength = 14849584.1916158 } [PrintingService.cs@2147] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 355, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.00806636648347, Elapsed = 07:14:39.8006751, TimeTotal = 11:40:58.7226845, Remaining = 04:26:18.9220094, Incomplete = False, SoftCount = 566, LayerPrintDone = 355, WeightsDone = 355, WeightDone = 02:36:44.5121621, WeightTotal = 03:32:48.3549156, WeightTotalEstimate = 03:32:48.3549157, LayerRecoatElapsed = 02:23:16.1127243, LayerRecoatDelays = 00:24:00, LayerRecoatPrintLayersElapsed = 01:40:15.1184317, LayerRecoatNoDelayAverage = 00:00:14.9085682, StreamingElapsed = 02:32:18.6956422, ObjectLayerOverheadAverageDuration = 00:00:00.0220400, TimeLayers = 06:59:18.9236265, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:45.6232693, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.1138660, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6285230, JobElapsed = 04:12:41.6431296, JobTotal = 06:16:02.1812375, WeightEstimate = 00:56:03.8427536 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:15:15. coolingEstimate=02:26:45.6232693 [PrintingService.cs@1912] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.00806636648347;StartedAtUtc;07:14:39.8006751;11:40:58.7226845;04:26:18.9220094;False;566;355;355;02:36:44.5121621;03:32:48.3549156;03:32:48.3549157;02:23:16.1127243;00:24:00;01:40:15.1184317;00:00:14.9085682;02:32:18.6956422;00:00:00.0220400;06:59:18.9236265;00:00:00;02:26:45.6232693;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.1138660;00:00:00;00:04:28.6285230;04:12:41.6431296;06:16:02.1812375 [PrintingService.cs@1918] +06/28/2026 03:48:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 355. PrevPreviewWeight=LayerWeight { Index = 354, FillTotalRelative = 0.18106939239815237, FillMaxRelative = 0.42592093437948714, TimeFromPreview = 35.409369156114025, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42592093437948714, PreviewWeight=LayerWeight { Index = 355, FillTotalRelative = 0.1803346778830232, FillMaxRelative = 0.4227179197366571, TimeFromPreview = 36.035586888166236, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0606866. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70923268, XYCompressed = 6966334, LSource = 36901665, LCompressed = 1489390 } [McuMovementClient.cs@491] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633622. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1271002. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70923268, XYCompressed = 6966334, LSource = 36901665, LCompressed = 1489390 } [McuMovementClient.cs@491] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1389639. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70923268, XYCompressed = 6966334, LSource = 36901665, LCompressed = 1489390 } [McuMovementClient.cs@491] +06/28/2026 03:48:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4112.383400217651, PrevLayerFillRatio=0.42592093437948714: Z1=105.24603061415905, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39626.090287069484, Z2 = 40050 } } [LayerClient.cs@969] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6096572404797 (6096572404797 @ 0) for mcu = 50790.995359 [27/06/2026 01:13:26] (50804.770039975 sec) to 6099531872987 (from now=6099411872987, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6096572404797 (6096572404797 @ 0) for mcu = 50790.995359 [27/06/2026 01:13:26] (50804.770039975 sec) to 6099531872987 (from external timestamp, flags=None, requested=6099531872987 (6099531872987 @ 0) for mcu = 50815.658122 [27/06/2026 01:13:51] (50829.43227489167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6096572404797 (6096572404797 @ 0) for mcu = 50790.995359 [27/06/2026 01:13:26] (50804.770039975 sec) to 6099531872987 (from external timestamp, flags=None, requested=6099531872987 (6099531872987 @ 0) for mcu = 50815.658122 [27/06/2026 01:13:51] (50829.43227489167 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:48:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:49:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0832662. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3136499. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 70923268, XYCompressed = 6966334, LSource = 36901665, LCompressed = 1489390 } [McuMovementClient.cs@491] +06/28/2026 03:49:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:49:14 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:49:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:49:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 355, Weight=LayerWeight { Index = 355, FillTotalRelative = 0.1803346778830232, FillMaxRelative = 0.4227179197366571, TimeFromPreview = 36.035586888166236, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:49:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6101858581146, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:49:17 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6101978587554, flushed existing data. Was Timestamp=0, Now=6101858589904, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:49:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:49:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6099331009565 (6099331009565 @ 0) for mcu = 50813.984144 [27/06/2026 01:13:49] (50827.758413041665 sec) to 6101978625408 (from now=6101858625408, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:49:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6099331033571 (1561428744594420 @ 8) for mcu = 50813.984344 [27/06/2026 01:13:49] (50827.758613099606 sec) to 6101978625408 (from now=6101858625408, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:49:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6099331033571 (1561428744594412 @ 8) for mcu = 50813.984344 [27/06/2026 01:13:49] (50827.75861309935 sec) to 6101978625408 (from now=6101858625408, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:49:17 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:49:18 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:49:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:49:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0463274 ~ 5.98 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:49:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 133.75 [HeaterCheck.cs@111] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.9356366. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.6260508. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71136506, XYCompressed = 6985607, LSource = 37010750, LCompressed = 1492284 } [McuMovementClient.cs@491] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:49:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 355 [PrintingService.cs@2118] +06/28/2026 03:49:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.6465922. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71136506, XYCompressed = 6985607, LSource = 37010750, LCompressed = 1492284 } [McuMovementClient.cs@491] +06/28/2026 03:49:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 356, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.1312099575805, Elapsed = 07:15:20.4378607, TimeTotal = 11:40:40.7680432, Remaining = 04:25:20.3301825, Incomplete = False, SoftCount = 566, LayerPrintDone = 356, WeightsDone = 356, WeightDone = 02:37:04.6482757, WeightTotal = 03:32:30.5492980, WeightTotalEstimate = 03:32:30.5492981, LayerRecoatElapsed = 02:23:36.6137963, LayerRecoatDelays = 00:24:03, LayerRecoatPrintLayersElapsed = 01:40:35.6195042, LayerRecoatNoDelayAverage = 00:00:14.9139580, StreamingElapsed = 02:32:38.8097158, ObjectLayerOverheadAverageDuration = 00:00:00.0220400, TimeLayers = 06:59:05.6238922, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:40.9683623, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.8145400, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7093700, JobElapsed = 04:13:22.2712885, JobTotal = 06:15:48.0999822, WeightEstimate = 00:55:25.9010224 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:14:57. coolingEstimate=02:26:40.9683623 [PrintingService.cs@1912] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.1312099575805;StartedAtUtc;07:15:20.4378607;11:40:40.7680432;04:25:20.3301825;False;566;356;356;02:37:04.6482757;03:32:30.5492980;03:32:30.5492981;02:23:36.6137963;00:24:03;01:40:35.6195042;00:00:14.9139580;02:32:38.8097158;00:00:00.0220400;06:59:05.6238922;00:00:00;02:26:40.9683623;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.8145400;00:00:00;00:04:28.7093700;04:13:22.2712885;06:15:48.0999822 [PrintingService.cs@1918] +06/28/2026 03:49:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 355. PreviewWeight=LayerWeight { Index = 355, FillTotalRelative = 0.1803346778830232, FillMaxRelative = 0.4227179197366571, TimeFromPreview = 36.035586888166236, EnergyDensityIncreaseFactor = 0 }, FillArea=20142.36351535133, PreviewFillRatio=0.4227179197366571, Results=4, StreamingSeconds (preview) = 36.035586888166236, StreamingSeconds (extrapolated) = 36.919691243512005, StreamingSeconds (no overhead) = 20.1140736 (02:32:38.8097158), LayerElapsedSeconds=40.628124, LayerStreamStats=StreamStats { EdgeCount = 105427, OnTraceLength = 20618.96457992494, AllTraceLength = 26577.813531279564 }, TotalStreamStats=StreamStats { EdgeCount = 34597017, OnTraceLength = 6647947.873453433, AllTraceLength = 14876162.005147079 } [PrintingService.cs@2147] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 356, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.131213177553676, Elapsed = 07:15:20.4338024, TimeTotal = 11:40:40.7593326, Remaining = 04:25:20.3255302, Incomplete = False, SoftCount = 566, LayerPrintDone = 356, WeightsDone = 356, WeightDone = 02:37:04.6442174, WeightTotal = 03:32:30.5428457, WeightTotalEstimate = 03:32:30.5428457, LayerRecoatElapsed = 02:23:36.6137963, LayerRecoatDelays = 00:24:03, LayerRecoatPrintLayersElapsed = 01:40:35.6195042, LayerRecoatNoDelayAverage = 00:00:14.9139580, StreamingElapsed = 02:32:38.8097158, ObjectLayerOverheadAverageDuration = 00:00:00.0220286, TimeLayers = 06:59:05.6174399, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:40.9661040, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.8145400, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7093700, JobElapsed = 04:13:22.2725262, JobTotal = 06:15:48.0935299, WeightEstimate = 00:55:25.8986283 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:14:57. coolingEstimate=02:26:40.9661040 [PrintingService.cs@1912] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.131213177553676;StartedAtUtc;07:15:20.4338024;11:40:40.7593326;04:25:20.3255302;False;566;356;356;02:37:04.6442174;03:32:30.5428457;03:32:30.5428457;02:23:36.6137963;00:24:03;01:40:35.6195042;00:00:14.9139580;02:32:38.8097158;00:00:00.0220286;06:59:05.6174399;00:00:00;02:26:40.9661040;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.8145400;00:00:00;00:04:28.7093700;04:13:22.2725262;06:15:48.0935299 [PrintingService.cs@1918] +06/28/2026 03:49:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 356. PrevPreviewWeight=LayerWeight { Index = 355, FillTotalRelative = 0.1803346778830232, FillMaxRelative = 0.4227179197366571, TimeFromPreview = 36.035586888166236, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4227179197366571, PreviewWeight=LayerWeight { Index = 356, FillTotalRelative = 0.18076421223174569, FillMaxRelative = 0.4253729643150878, TimeFromPreview = 34.96155187144963, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.6627293. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71136506, XYCompressed = 6985607, LSource = 37010750, LCompressed = 1492284 } [McuMovementClient.cs@491] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633687. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.7271225. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71136506, XYCompressed = 6985607, LSource = 37010750, LCompressed = 1492284 } [McuMovementClient.cs@491] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.7386573. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71136506, XYCompressed = 6985607, LSource = 37010750, LCompressed = 1492284 } [McuMovementClient.cs@491] +06/28/2026 03:49:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4107.191497233516, PrevLayerFillRatio=0.4227179197366571: Z1=105.11315701575258, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39731.20344408524, Z2 = 40150 } } [LayerClient.cs@969] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6100751624223 (6100751624223 @ 0) for mcu = 50825.822823 [27/06/2026 01:14:01] (50839.596868525 sec) to 6104403807231 (from now=6104283807231, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6100751624223 (6100751624223 @ 0) for mcu = 50825.822823 [27/06/2026 01:14:01] (50839.596868525 sec) to 6104403807231 (from external timestamp, flags=None, requested=6104403807231 (6104403807231 @ 0) for mcu = 50856.258269 [27/06/2026 01:14:32] (50870.031726925 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6100751624223 (6100751624223 @ 0) for mcu = 50825.822823 [27/06/2026 01:14:01] (50839.596868525 sec) to 6104403807231 (from external timestamp, flags=None, requested=6104403807231 (6104403807231 @ 0) for mcu = 50856.258269 [27/06/2026 01:14:32] (50870.031726925 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:49:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:49:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0789875. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.9159816. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71136506, XYCompressed = 6985607, LSource = 37010750, LCompressed = 1492284 } [McuMovementClient.cs@491] +06/28/2026 03:49:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:49:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:49:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:49:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 356, Weight=LayerWeight { Index = 356, FillTotalRelative = 0.18076421223174569, FillMaxRelative = 0.4253729643150878, TimeFromPreview = 34.96155187144963, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:49:51 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6105985584790, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:49:51 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6106105589831, flushed existing data. Was Timestamp=0, Now=6105985592308, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:49:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:49:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6104268768387 (6104268768387 @ 0) for mcu = 50855.132987 [27/06/2026 01:14:31] (50868.906403225 sec) to 6106105624725 (from now=6105985624725, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:49:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6104268792383 (1562692810850058 @ 8) for mcu = 50855.133187 [27/06/2026 01:14:31] (50868.906603191994 sec) to 6106105624725 (from now=6105985624725, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:49:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6104268792408 (1562692810856591 @ 8) for mcu = 50855.133187 [27/06/2026 01:14:31] (50868.906603404655 sec) to 6106105624725 (from now=6105985624725, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:49:51 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:49:51 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (212 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:49:52 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:49:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.0352378. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.0352378. Loops = 77. GC duration = 00:00:00.3557434. SinceCollect=00:01:15.2878786. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71295598, XYCompressed = 6995801, LSource = 37092380, LCompressed = 1494942 } [McuMovementClient.cs@478] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=127975, gen1=32765, gen2=924, LatencyMode=Interactive, FreeMemory=5751308288, Live=356124312, HeapSizeBytes=368782200, FragmentedBytes=12969024, TotalCommittedBytes=377339904, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:50:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 356 [PrintingService.cs@2118] +06/28/2026 03:50:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0147961. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71295598, XYCompressed = 6995801, LSource = 37092380, LCompressed = 1494942 } [McuMovementClient.cs@491] +06/28/2026 03:50:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 357, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.29505689137758, Elapsed = 07:15:55.0943001, TimeTotal = 11:39:45.8261719, Remaining = 04:23:50.7318718, Incomplete = False, SoftCount = 566, LayerPrintDone = 357, WeightsDone = 357, WeightDone = 02:37:25.0368371, WeightTotal = 03:31:56.1755285, WeightTotalEstimate = 03:31:56.1755285, LayerRecoatElapsed = 02:23:50.8816743, LayerRecoatDelays = 00:24:06, LayerRecoatPrintLayersElapsed = 01:40:49.8873823, LayerRecoatNoDelayAverage = 00:00:14.9063935, StreamingElapsed = 02:32:59.1803069, ObjectLayerOverheadAverageDuration = 00:00:00.0220286, TimeLayers = 06:58:24.9262098, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:26.7241734, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:47.8311550, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.5959025, JobElapsed = 04:13:56.9273150, JobTotal = 06:15:08.4991523, WeightEstimate = 00:54:31.1386914 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:14:02. coolingEstimate=02:26:26.7241734 [PrintingService.cs@1912] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.29505689137758;StartedAtUtc;07:15:55.0943001;11:39:45.8261719;04:23:50.7318718;False;566;357;357;02:37:25.0368371;03:31:56.1755285;03:31:56.1755285;02:23:50.8816743;00:24:06;01:40:49.8873823;00:00:14.9063935;02:32:59.1803069;00:00:00.0220286;06:58:24.9262098;00:00:00;02:26:26.7241734;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:47.8311550;00:00:00;00:04:28.5959025;04:13:56.9273150;06:15:08.4991523 [PrintingService.cs@1918] +06/28/2026 03:50:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 356. PreviewWeight=LayerWeight { Index = 356, FillTotalRelative = 0.18076421223174569, FillMaxRelative = 0.4253729643150878, TimeFromPreview = 34.96155187144963, EnergyDensityIncreaseFactor = 0 }, FillArea=19988.79967813119, PreviewFillRatio=0.4253729643150878, Results=4, StreamingSeconds (preview) = 34.96155187144963, StreamingSeconds (extrapolated) = 35.9325780493615, StreamingSeconds (no overhead) = 20.3705911 (02:32:59.1803069), LayerElapsedSeconds=34.6547806, LayerStreamStats=StreamStats { EdgeCount = 78492, OnTraceLength = 15288.2611836344, AllTraceLength = 20429.532890722156 }, TotalStreamStats=StreamStats { EdgeCount = 34675509, OnTraceLength = 6663236.134637067, AllTraceLength = 14896591.538037801 } [PrintingService.cs@2147] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 357, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.29506043412173, Elapsed = 07:15:55.0898375, TimeTotal = 11:39:45.8166205, Remaining = 04:23:50.7267830, Incomplete = False, SoftCount = 566, LayerPrintDone = 357, WeightsDone = 357, WeightDone = 02:37:25.0323745, WeightTotal = 03:31:56.1684534, WeightTotalEstimate = 03:31:56.1684535, LayerRecoatElapsed = 02:23:50.8816743, LayerRecoatDelays = 00:24:06, LayerRecoatPrintLayersElapsed = 01:40:49.8873823, LayerRecoatNoDelayAverage = 00:00:14.9063935, StreamingElapsed = 02:32:59.1803069, ObjectLayerOverheadAverageDuration = 00:00:00.0220161, TimeLayers = 06:58:24.9191347, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:26.7216971, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:47.8311550, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.5959025, JobElapsed = 04:13:56.9281810, JobTotal = 06:15:08.4920772, WeightEstimate = 00:54:31.1360790 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:14:02. coolingEstimate=02:26:26.7216971 [PrintingService.cs@1912] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.29506043412173;StartedAtUtc;07:15:55.0898375;11:39:45.8166205;04:23:50.7267830;False;566;357;357;02:37:25.0323745;03:31:56.1684534;03:31:56.1684535;02:23:50.8816743;00:24:06;01:40:49.8873823;00:00:14.9063935;02:32:59.1803069;00:00:00.0220161;06:58:24.9191347;00:00:00;02:26:26.7216971;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:47.8311550;00:00:00;00:04:28.5959025;04:13:56.9281810;06:15:08.4920772 [PrintingService.cs@1918] +06/28/2026 03:50:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 357. PrevPreviewWeight=LayerWeight { Index = 356, FillTotalRelative = 0.18076421223174569, FillMaxRelative = 0.4253729643150878, TimeFromPreview = 34.96155187144963, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4253729643150878, PreviewWeight=LayerWeight { Index = 357, FillTotalRelative = 0.17998754801216632, FillMaxRelative = 0.42207760234737124, TimeFromPreview = 36.03112469206118, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0293508. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71295598, XYCompressed = 6995801, LSource = 37092380, LCompressed = 1494942 } [McuMovementClient.cs@491] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633402. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0991921. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71295598, XYCompressed = 6995801, LSource = 37092380, LCompressed = 1494942 } [McuMovementClient.cs@491] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1104982. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71295598, XYCompressed = 6995801, LSource = 37092380, LCompressed = 1494942 } [McuMovementClient.cs@491] +06/28/2026 03:50:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4111.495172179436, PrevLayerFillRatio=0.4253729643150878: Z1=105.2232986686655, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39836.4267427539, Z2 = 40250 } } [LayerClient.cs@969] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6105623485222 (6105623485222 @ 0) for mcu = 50866.422502 [27/06/2026 01:14:42] (50880.19571018333 sec) to 6108562942566 (from now=6108442942566, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6105623485222 (6105623485222 @ 0) for mcu = 50866.422502 [27/06/2026 01:14:42] (50880.19571018333 sec) to 6108562942566 (from external timestamp, flags=None, requested=6108562942566 (6108562942566 @ 0) for mcu = 50890.918478 [27/06/2026 01:15:06] (50904.69118805 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6105623485222 (6105623485222 @ 0) for mcu = 50866.422502 [27/06/2026 01:14:42] (50880.19571018333 sec) to 6108562942566 (from external timestamp, flags=None, requested=6108562942566 (6108562942566 @ 0) for mcu = 50890.918478 [27/06/2026 01:15:06] (50904.69118805 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:50:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0769387. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2873522. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71295598, XYCompressed = 6995801, LSource = 37092380, LCompressed = 1494942 } [McuMovementClient.cs@491] +06/28/2026 03:50:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:50:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0404369 ~ 6 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:50:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:50:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:50:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 357, Weight=LayerWeight { Index = 357, FillTotalRelative = 0.17998754801216632, FillMaxRelative = 0.42207760234737124, TimeFromPreview = 36.03112469206118, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:50:32 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6110896419149, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:50:32 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6111016425749, flushed existing data. Was Timestamp=0, Now=6110896428278, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:50:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:50:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6108385416237 (6108385416237 @ 0) for mcu = 50889.439106 [27/06/2026 01:15:05] (50903.211801975 sec) to 6111016478397 (from now=6110896478397, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:50:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6108385440219 (1563746672696290 @ 8) for mcu = 50889.439306 [27/06/2026 01:15:05] (50903.212001832355 sec) to 6111016478397 (from now=6110896478397, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:50:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6108385440245 (1563746672702945 @ 8) for mcu = 50889.439306 [27/06/2026 01:15:05] (50903.21200204899 sec) to 6111016478397 (from now=6110896478397, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:50:32 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:50:33 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:50:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.8210906. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.6225181. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71508848, XYCompressed = 7014965, LSource = 37201490, LCompressed = 1497842 } [McuMovementClient.cs@491] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:50:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 357 [PrintingService.cs@2118] +06/28/2026 03:50:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.6342367. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71508848, XYCompressed = 7014965, LSource = 37201490, LCompressed = 1497842 } [McuMovementClient.cs@491] +06/28/2026 03:50:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 358, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.41879433430574, Elapsed = 07:16:35.7172850, TimeTotal = 11:39:27.6758649, Remaining = 04:22:51.9585799, Incomplete = False, SoftCount = 566, LayerPrintDone = 358, WeightsDone = 358, WeightDone = 02:37:45.1221534, WeightTotal = 03:31:38.1765079, WeightTotalEstimate = 03:31:38.1765080, LayerRecoatElapsed = 02:24:11.4193429, LayerRecoatDelays = 00:24:09, LayerRecoatPrintLayersElapsed = 01:41:10.4250511, LayerRecoatNoDelayAverage = 00:00:14.9118413, StreamingElapsed = 02:33:19.2480697, ObjectLayerOverheadAverageDuration = 00:00:00.0220161, TimeLayers = 06:58:11.4815379, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:22.0185383, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.5393690, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6776195, JobElapsed = 04:14:37.5462999, JobTotal = 06:14:54.2645494, WeightEstimate = 00:53:53.0543546 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:13:44. coolingEstimate=02:26:22.0185383 [PrintingService.cs@1912] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.41879433430574;StartedAtUtc;07:16:35.7172850;11:39:27.6758649;04:22:51.9585799;False;566;358;358;02:37:45.1221534;03:31:38.1765079;03:31:38.1765080;02:24:11.4193429;00:24:09;01:41:10.4250511;00:00:14.9118413;02:33:19.2480697;00:00:00.0220161;06:58:11.4815379;00:00:00;02:26:22.0185383;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.5393690;00:00:00;00:04:28.6776195;04:14:37.5462999;06:14:54.2645494 [PrintingService.cs@1918] +06/28/2026 03:50:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 357. PreviewWeight=LayerWeight { Index = 357, FillTotalRelative = 0.17998754801216632, FillMaxRelative = 0.42207760234737124, TimeFromPreview = 36.03112469206118, EnergyDensityIncreaseFactor = 0 }, FillArea=19303.65598521629, PreviewFillRatio=0.42207760234737124, Results=4, StreamingSeconds (preview) = 36.03112469206118, StreamingSeconds (extrapolated) = 37.059708254969976, StreamingSeconds (no overhead) = 20.0677628 (02:33:19.2480697), LayerElapsedSeconds=40.6181963, LayerStreamStats=StreamStats { EdgeCount = 105452, OnTraceLength = 20618.85660108924, AllTraceLength = 26622.2811871022 }, TotalStreamStats=StreamStats { EdgeCount = 34780961, OnTraceLength = 6683854.991238156, AllTraceLength = 14923213.819224903 } [PrintingService.cs@2147] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 358, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.41880099453814, Elapsed = 07:16:35.7088721, TimeTotal = 11:39:27.6579087, Remaining = 04:22:51.9490366, Incomplete = False, SoftCount = 566, LayerPrintDone = 358, WeightsDone = 358, WeightDone = 02:37:45.1137405, WeightTotal = 03:31:38.1632070, WeightTotalEstimate = 03:31:38.1632070, LayerRecoatElapsed = 02:24:11.4193429, LayerRecoatDelays = 00:24:09, LayerRecoatPrintLayersElapsed = 01:41:10.4250511, LayerRecoatNoDelayAverage = 00:00:14.9118413, StreamingElapsed = 02:33:19.2480697, ObjectLayerOverheadAverageDuration = 00:00:00.0219926, TimeLayers = 06:58:11.4682370, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:22.0138830, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.5393690, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6776195, JobElapsed = 04:14:37.5474091, JobTotal = 06:14:54.2512485, WeightEstimate = 00:53:53.0494665 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:13:44. coolingEstimate=02:26:22.0138830 [PrintingService.cs@1912] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.41880099453814;StartedAtUtc;07:16:35.7088721;11:39:27.6579087;04:22:51.9490366;False;566;358;358;02:37:45.1137405;03:31:38.1632070;03:31:38.1632070;02:24:11.4193429;00:24:09;01:41:10.4250511;00:00:14.9118413;02:33:19.2480697;00:00:00.0219926;06:58:11.4682370;00:00:00;02:26:22.0138830;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.5393690;00:00:00;00:04:28.6776195;04:14:37.5474091;06:14:54.2512485 [PrintingService.cs@1918] +06/28/2026 03:50:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 358. PrevPreviewWeight=LayerWeight { Index = 357, FillTotalRelative = 0.17998754801216632, FillMaxRelative = 0.42207760234737124, TimeFromPreview = 36.03112469206118, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.42207760234737124, PreviewWeight=LayerWeight { Index = 358, FillTotalRelative = 0.18035878448487175, FillMaxRelative = 0.4246298474994885, TimeFromPreview = 35.11591886956231, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.6493847. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71508848, XYCompressed = 7014965, LSource = 37201490, LCompressed = 1497842 } [McuMovementClient.cs@491] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634382. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.7157118. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71508848, XYCompressed = 7014965, LSource = 37201490, LCompressed = 1497842 } [McuMovementClient.cs@491] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.7264613. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71508848, XYCompressed = 7014965, LSource = 37201490, LCompressed = 1497842 } [McuMovementClient.cs@491] +06/28/2026 03:50:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4106.153579479481, PrevLayerFillRatio=0.42207760234737124: Z1=105.0865941413595, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 39941.51333689526, Z2 = 40350 } } [LayerClient.cs@969] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6109782695423 (6109782695423 @ 0) for mcu = 50901.083361 [27/06/2026 01:15:17] (50914.85579519167 sec) to 6113436645903 (from now=6113316645903, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6109782695423 (6109782695423 @ 0) for mcu = 50901.083361 [27/06/2026 01:15:17] (50914.85579519167 sec) to 6113436645903 (from external timestamp, flags=None, requested=6113436645903 (6113436645903 @ 0) for mcu = 50931.533600 [27/06/2026 01:15:47] (50945.305382525 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6109782695423 (6109782695423 @ 0) for mcu = 50901.083361 [27/06/2026 01:15:17] (50914.85579519167 sec) to 6113436645903 (from external timestamp, flags=None, requested=6113436645903 (6113436645903 @ 0) for mcu = 50931.533600 [27/06/2026 01:15:47] (50945.305382525 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:50:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:51:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 133.75 [HeaterCheck.cs@111] +06/28/2026 03:51:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0740575. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:51.9021226. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71508848, XYCompressed = 7014965, LSource = 37201490, LCompressed = 1497842 } [McuMovementClient.cs@491] +06/28/2026 03:51:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:51:08 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:51:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:51:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 358, Weight=LayerWeight { Index = 358, FillTotalRelative = 0.18035878448487175, FillMaxRelative = 0.4246298474994885, TimeFromPreview = 35.11591886956231, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:51:11 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6115651873466, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:51:11 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6115771883334, flushed existing data. Was Timestamp=0, Now=6115651885817, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:51:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:51:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6113302739120 (6113302739120 @ 0) for mcu = 50930.417653 [27/06/2026 01:15:46] (50944.189492666665 sec) to 6115771941750 (from now=6115651941750, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:51:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6113302763120 (1565005507358864 @ 8) for mcu = 50930.417853 [27/06/2026 01:15:46] (50944.18969267135 sec) to 6115771941750 (from now=6115651941750, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:51:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6113302763109 (1565005507355963 @ 8) for mcu = 50930.417853 [27/06/2026 01:15:46] (50944.18969257692 sec) to 6115771941750 (from now=6115651941750, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:51:12 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:51:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (152 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:51:12 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:51:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:51:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1042908 ~ 6.02 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:51:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.1865827. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.1865827. Loops = 77. GC duration = 00:00:00.3564856. SinceCollect=00:01:20.5513475. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71667840, XYCompressed = 7025174, LSource = 37283102, LCompressed = 1500448 } [McuMovementClient.cs@478] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=128181, gen1=32796, gen2=925, LatencyMode=Interactive, FreeMemory=5718327296, Live=357290912, HeapSizeBytes=368164784, FragmentedBytes=11480880, TotalCommittedBytes=378667008, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:51:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 358 [PrintingService.cs@2118] +06/28/2026 03:51:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0110493. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71667840, XYCompressed = 7025174, LSource = 37283102, LCompressed = 1500448 } [McuMovementClient.cs@491] +06/28/2026 03:51:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 359, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.54177767649431, Elapsed = 07:17:15.6463877, TimeTotal = 11:39:08.9937165, Remaining = 04:21:53.3473288, Incomplete = False, SoftCount = 566, LayerPrintDone = 359, WeightsDone = 359, WeightDone = 02:38:05.5029835, WeightTotal = 03:31:21.5113361, WeightTotalEstimate = 03:31:21.5113361, LayerRecoatElapsed = 02:24:30.9676155, LayerRecoatDelays = 00:24:12, LayerRecoatPrintLayersElapsed = 01:41:29.9733238, LayerRecoatNoDelayAverage = 00:00:14.9152223, StreamingElapsed = 02:33:39.6153201, ObjectLayerOverheadAverageDuration = 00:00:00.0219926, TimeLayers = 06:57:57.6429095, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:17.1750183, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.9788990, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7283345, JobElapsed = 04:15:17.4761151, JobTotal = 06:14:39.9356760, WeightEstimate = 00:53:16.0083526 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:13:25. coolingEstimate=02:26:17.1750183 [PrintingService.cs@1912] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.54177767649431;StartedAtUtc;07:17:15.6463877;11:39:08.9937165;04:21:53.3473288;False;566;359;359;02:38:05.5029835;03:31:21.5113361;03:31:21.5113361;02:24:30.9676155;00:24:12;01:41:29.9733238;00:00:14.9152223;02:33:39.6153201;00:00:00.0219926;06:57:57.6429095;00:00:00;02:26:17.1750183;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.9788990;00:00:00;00:04:28.7283345;04:15:17.4761151;06:14:39.9356760 [PrintingService.cs@1918] +06/28/2026 03:51:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 358. PreviewWeight=LayerWeight { Index = 358, FillTotalRelative = 0.18035878448487175, FillMaxRelative = 0.4246298474994885, TimeFromPreview = 35.11591886956231, EnergyDensityIncreaseFactor = 0 }, FillArea=17897.11436093235, PreviewFillRatio=0.4246298474994885, Results=4, StreamingSeconds (preview) = 35.11591886956231, StreamingSeconds (extrapolated) = 36.019121338911276, StreamingSeconds (no overhead) = 20.3672504 (02:33:39.6153201), LayerElapsedSeconds=39.9288131, LayerStreamStats=StreamStats { EdgeCount = 78470, OnTraceLength = 15284.963959604502, AllTraceLength = 20597.11855363846 }, TotalStreamStats=StreamStats { EdgeCount = 34859431, OnTraceLength = 6699139.955197761, AllTraceLength = 14943810.937778542 } [PrintingService.cs@2147] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 359, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.541783684370344, Elapsed = 07:17:15.6387768, TimeTotal = 11:39:08.9775175, Remaining = 04:21:53.3387407, Incomplete = False, SoftCount = 566, LayerPrintDone = 359, WeightsDone = 359, WeightDone = 02:38:05.4953726, WeightTotal = 03:31:21.4993368, WeightTotalEstimate = 03:31:21.4993369, LayerRecoatElapsed = 02:24:30.9676155, LayerRecoatDelays = 00:24:12, LayerRecoatPrintLayersElapsed = 01:41:29.9733238, LayerRecoatNoDelayAverage = 00:00:14.9152223, StreamingElapsed = 02:33:39.6153201, ObjectLayerOverheadAverageDuration = 00:00:00.0219714, TimeLayers = 06:57:57.6309102, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:17.1708186, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.9788990, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7283345, JobElapsed = 04:15:17.4795938, JobTotal = 06:14:39.9236767, WeightEstimate = 00:53:16.0039643 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:13:25. coolingEstimate=02:26:17.1708186 [PrintingService.cs@1912] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.541783684370344;StartedAtUtc;07:17:15.6387768;11:39:08.9775175;04:21:53.3387407;False;566;359;359;02:38:05.4953726;03:31:21.4993368;03:31:21.4993369;02:24:30.9676155;00:24:12;01:41:29.9733238;00:00:14.9152223;02:33:39.6153201;00:00:00.0219714;06:57:57.6309102;00:00:00;02:26:17.1708186;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.9788990;00:00:00;00:04:28.7283345;04:15:17.4795938;06:14:39.9236767 [PrintingService.cs@1918] +06/28/2026 03:51:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 359. PrevPreviewWeight=LayerWeight { Index = 358, FillTotalRelative = 0.18035878448487175, FillMaxRelative = 0.4246298474994885, TimeFromPreview = 35.11591886956231, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4246298474994885, PreviewWeight=LayerWeight { Index = 359, FillTotalRelative = 0.179622468743747, FillMaxRelative = 0.4211065089058246, TimeFromPreview = 35.87532477590127, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0313565. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71667840, XYCompressed = 7025174, LSource = 37283102, LCompressed = 1500448 } [McuMovementClient.cs@491] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633879. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0954540. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71667840, XYCompressed = 7025174, LSource = 37283102, LCompressed = 1500448 } [McuMovementClient.cs@491] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1062432. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71667840, XYCompressed = 7025174, LSource = 37283102, LCompressed = 1500448 } [McuMovementClient.cs@491] +06/28/2026 03:51:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4110.290622452789, PrevLayerFillRatio=0.4246298474994885: Z1=105.19247127124913, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 40046.70580816651, Z2 = 40450 } } [LayerClient.cs@969] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6114656330244 (6114656330244 @ 0) for mcu = 50941.697751 [27/06/2026 01:15:57] (50955.4694187 sec) to 6118228438476 (from now=6118108438476, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6114656330244 (6114656330244 @ 0) for mcu = 50941.697751 [27/06/2026 01:15:57] (50955.4694187 sec) to 6118228438476 (from external timestamp, flags=None, requested=6118228438476 (6118228438476 @ 0) for mcu = 50971.465896 [27/06/2026 01:16:27] (50985.2369873 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6114656330244 (6114656330244 @ 0) for mcu = 50941.697751 [27/06/2026 01:15:57] (50955.4694187 sec) to 6118228438476 (from external timestamp, flags=None, requested=6118228438476 (6118228438476 @ 0) for mcu = 50971.465896 [27/06/2026 01:16:27] (50985.2369873 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:51:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:51:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0445513. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2834431. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71667840, XYCompressed = 7025174, LSource = 37283102, LCompressed = 1500448 } [McuMovementClient.cs@491] +06/28/2026 03:51:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:51:43 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:51:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:51:46 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 359, Weight=LayerWeight { Index = 359, FillTotalRelative = 0.179622468743747, FillMaxRelative = 0.4211065089058246, TimeFromPreview = 35.87532477590127, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:51:46 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6119812872901, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:51:46 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6119932877631, flushed existing data. Was Timestamp=0, Now=6119812879964, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:51:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:51:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6118051267471 (6118051267471 @ 0) for mcu = 50969.989447 [27/06/2026 01:16:25] (50983.760562258336 sec) to 6119932901921 (from now=6119812901921, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:51:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6118051291498 (1566221130623520 @ 8) for mcu = 50969.989647 [27/06/2026 01:16:25] (50983.76076248437 sec) to 6119932901921 (from now=6119812901921, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:51:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6118051291468 (1566221130615935 @ 8) for mcu = 50969.989647 [27/06/2026 01:16:25] (50983.76076223747 sec) to 6119932901921 (from now=6119812901921, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:51:46 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:51:47 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:51:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.7920055. Loops = 76. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.3741533. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71881070, XYCompressed = 7044452, LSource = 37392200, LCompressed = 1503349 } [McuMovementClient.cs@491] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:52:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 359 [PrintingService.cs@2118] +06/28/2026 03:52:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.3977213. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71881070, XYCompressed = 7044452, LSource = 37392200, LCompressed = 1503349 } [McuMovementClient.cs@491] +06/28/2026 03:52:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 360, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.674200271810065, Elapsed = 07:17:50.0296666, TimeTotal = 11:38:35.2211798, Remaining = 04:20:45.1915132, Incomplete = False, SoftCount = 566, LayerPrintDone = 360, WeightsDone = 360, WeightDone = 02:38:25.5995897, WeightTotal = 03:31:02.7491983, WeightTotalEstimate = 03:31:02.7491984, LayerRecoatElapsed = 02:24:45.2542882, LayerRecoatDelays = 00:24:15, LayerRecoatPrintLayersElapsed = 01:41:44.2599965, LayerRecoatNoDelayAverage = 00:00:14.9077408, StreamingElapsed = 02:33:59.6975658, ObjectLayerOverheadAverageDuration = 00:00:00.0219714, TimeLayers = 06:57:32.6262156, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:08.4191755, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.0063040, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6161120, JobElapsed = 04:15:51.8619604, JobTotal = 06:14:16.0037996, WeightEstimate = 00:52:37.1496087 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:12:51. coolingEstimate=02:26:08.4191755 [PrintingService.cs@1912] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.674200271810065;StartedAtUtc;07:17:50.0296666;11:38:35.2211798;04:20:45.1915132;False;566;360;360;02:38:25.5995897;03:31:02.7491983;03:31:02.7491984;02:24:45.2542882;00:24:15;01:41:44.2599965;00:00:14.9077408;02:33:59.6975658;00:00:00.0219714;06:57:32.6262156;00:00:00;02:26:08.4191755;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.0063040;00:00:00;00:04:28.6161120;04:15:51.8619604;06:14:16.0037996 [PrintingService.cs@1918] +06/28/2026 03:52:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 359. PreviewWeight=LayerWeight { Index = 359, FillTotalRelative = 0.179622468743747, FillMaxRelative = 0.4211065089058246, TimeFromPreview = 35.87532477590127, EnergyDensityIncreaseFactor = 0 }, FillArea=20116.97615405284, PreviewFillRatio=0.4211065089058246, Results=4, StreamingSeconds (preview) = 35.87532477590127, StreamingSeconds (extrapolated) = 36.73695478827959, StreamingSeconds (no overhead) = 20.0822457 (02:33:59.6975658), LayerElapsedSeconds=34.3823224, LayerStreamStats=StreamStats { EdgeCount = 105440, OnTraceLength = 20622.292342320085, AllTraceLength = 26393.861653104424 }, TotalStreamStats=StreamStats { EdgeCount = 34964871, OnTraceLength = 6719762.247540081, AllTraceLength = 14970204.799431646 } [PrintingService.cs@2147] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 360, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.67420435643608, Elapsed = 07:17:50.0244827, TimeTotal = 11:38:35.2101769, Remaining = 04:20:45.1856942, Incomplete = False, SoftCount = 566, LayerPrintDone = 360, WeightsDone = 360, WeightDone = 02:38:25.5944058, WeightTotal = 03:31:02.7410480, WeightTotalEstimate = 03:31:02.7410480, LayerRecoatElapsed = 02:24:45.2542882, LayerRecoatDelays = 00:24:15, LayerRecoatPrintLayersElapsed = 01:41:44.2599965, LayerRecoatNoDelayAverage = 00:00:14.9077408, StreamingElapsed = 02:33:59.6975658, ObjectLayerOverheadAverageDuration = 00:00:00.0219570, TimeLayers = 06:57:32.6180653, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:08.4163229, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.0063040, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6161120, JobElapsed = 04:15:51.8635936, JobTotal = 06:14:15.9956493, WeightEstimate = 00:52:37.1466422 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:12:51. coolingEstimate=02:26:08.4163229 [PrintingService.cs@1912] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.67420435643608;StartedAtUtc;07:17:50.0244827;11:38:35.2101769;04:20:45.1856942;False;566;360;360;02:38:25.5944058;03:31:02.7410480;03:31:02.7410480;02:24:45.2542882;00:24:15;01:41:44.2599965;00:00:14.9077408;02:33:59.6975658;00:00:00.0219570;06:57:32.6180653;00:00:00;02:26:08.4163229;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.0063040;00:00:00;00:04:28.6161120;04:15:51.8635936;06:14:15.9956493 [PrintingService.cs@1918] +06/28/2026 03:52:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 360. PrevPreviewWeight=LayerWeight { Index = 359, FillTotalRelative = 0.179622468743747, FillMaxRelative = 0.4211065089058246, TimeFromPreview = 35.87532477590127, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4211065089058246, PreviewWeight=LayerWeight { Index = 360, FillTotalRelative = 0.1799970917241441, FillMaxRelative = 0.4235573412861395, TimeFromPreview = 34.8849588043717, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4137988. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71881070, XYCompressed = 7044452, LSource = 37392200, LCompressed = 1503349 } [McuMovementClient.cs@491] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633990. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4796718. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71881070, XYCompressed = 7044452, LSource = 37392200, LCompressed = 1503349 } [McuMovementClient.cs@491] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:34.4901790. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71881070, XYCompressed = 7044452, LSource = 37392200, LCompressed = 1503349 } [McuMovementClient.cs@491] +06/28/2026 03:52:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4104.579492720831, PrevLayerFillRatio=0.4211065089058246: Z1=105.04630938017175, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 40151.75211754668, Z2 = 40550 } } [LayerClient.cs@969] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6119448191959 (6119448191959 @ 0) for mcu = 50981.630808 [27/06/2026 01:16:37] (50995.40159965833 sec) to 6122354402613 (from now=6122234402613, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6119448191959 (6119448191959 @ 0) for mcu = 50981.630808 [27/06/2026 01:16:37] (50995.40159965833 sec) to 6122354402613 (from external timestamp, flags=None, requested=6122354402613 (6122354402613 @ 0) for mcu = 51005.849753 [27/06/2026 01:17:01] (51019.620021775 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6119448191959 (6119448191959 @ 0) for mcu = 50981.630808 [27/06/2026 01:16:37] (50995.40159965833 sec) to 6122354402613 (from external timestamp, flags=None, requested=6122354402613 (6122354402613 @ 0) for mcu = 51005.849753 [27/06/2026 01:17:01] (51019.620021775 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:16 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 03:52:17 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 03:52:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 03:52:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 03:52:17 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 03:52:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 03:52:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0755002. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:45.6670700. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 71881070, XYCompressed = 7044452, LSource = 37392200, LCompressed = 1503349 } [McuMovementClient.cs@491] +06/28/2026 03:52:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:52:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:52:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:52:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 360, Weight=LayerWeight { Index = 360, FillTotalRelative = 0.1799970917241441, FillMaxRelative = 0.4235573412861395, TimeFromPreview = 34.8849588043717, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:52:24 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6124405720976, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:52:24 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6124525730711, flushed existing data. Was Timestamp=0, Now=6124405733156, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:52:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:52:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6122218908792 (6122218908792 @ 0) for mcu = 51004.720557 [27/06/2026 01:17:00] (51018.4909066 sec) to 6124525752794 (from now=6124405752794, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:52:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6122218932776 (1567288046790865 @ 8) for mcu = 51004.720757 [27/06/2026 01:17:00] (51018.49110647347 sec) to 6124525752794 (from now=6124405752794, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:52:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6122218932760 (1567288046786646 @ 8) for mcu = 51004.720757 [27/06/2026 01:17:00] (51018.491106336136 sec) to 6124525752794 (from now=6124405752794, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:52:25 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:52:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (280 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:52:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:52:25 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:52:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0663828 ~ 5.99 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:52:35 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] +06/28/2026 03:52:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:19.1276093. Loops = 77. [McuMovementClient.cs@475] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:19.1276093. Loops = 77. GC duration = 00:00:00.3702895. SinceCollect=00:01:13.0098654. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72040158, XYCompressed = 7054635, LSource = 37473842, LCompressed = 1505959 } [McuMovementClient.cs@478] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=128364, gen1=32848, gen2=926, LatencyMode=Interactive, FreeMemory=5928878080, Live=357625672, HeapSizeBytes=370940368, FragmentedBytes=14290216, TotalCommittedBytes=382976000, PinnedObjectsCount=26, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:52:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 360 [PrintingService.cs@2118] +06/28/2026 03:52:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0378890. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72040158, XYCompressed = 7054635, LSource = 37473842, LCompressed = 1505959 } [McuMovementClient.cs@491] +06/28/2026 03:52:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 361, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.79881862153768, Elapsed = 07:18:28.6814185, TimeTotal = 11:38:13.5928987, Remaining = 04:19:44.9114802, Incomplete = False, SoftCount = 566, LayerPrintDone = 361, WeightsDone = 361, WeightDone = 02:38:46.0707381, WeightTotal = 03:30:46.2588965, WeightTotalEstimate = 03:30:46.2588965, LayerRecoatElapsed = 02:25:03.4348917, LayerRecoatDelays = 00:24:18, LayerRecoatPrintLayersElapsed = 01:42:02.4406002, LayerRecoatNoDelayAverage = 00:00:14.9083022, StreamingElapsed = 02:34:20.1519411, ObjectLayerOverheadAverageDuration = 00:00:00.0219570, TimeLayers = 06:57:16.6052667, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:02.8118433, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.0792860, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6245330, JobElapsed = 04:16:30.5148851, JobTotal = 06:13:59.9014477, WeightEstimate = 00:52:00.1881584 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:12:30. coolingEstimate=02:26:02.8118433 [PrintingService.cs@1912] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.79881862153768;StartedAtUtc;07:18:28.6814185;11:38:13.5928987;04:19:44.9114802;False;566;361;361;02:38:46.0707381;03:30:46.2588965;03:30:46.2588965;02:25:03.4348917;00:24:18;01:42:02.4406002;00:00:14.9083022;02:34:20.1519411;00:00:00.0219570;06:57:16.6052667;00:00:00;02:26:02.8118433;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.0792860;00:00:00;00:04:28.6245330;04:16:30.5148851;06:13:59.9014477 [PrintingService.cs@1918] +06/28/2026 03:52:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 360. PreviewWeight=LayerWeight { Index = 360, FillTotalRelative = 0.1799970917241441, FillMaxRelative = 0.4235573412861395, TimeFromPreview = 34.8849588043717, EnergyDensityIncreaseFactor = 0 }, FillArea=16739.687836477628, PreviewFillRatio=0.4235573412861395, Results=4, StreamingSeconds (preview) = 34.8849588043717, StreamingSeconds (extrapolated) = 35.93652686378486, StreamingSeconds (no overhead) = 20.4543753 (02:34:20.1519411), LayerElapsedSeconds=38.6515241, LayerStreamStats=StreamStats { EdgeCount = 78497, OnTraceLength = 15286.5585680753, AllTraceLength = 20646.405445471406 }, TotalStreamStats=StreamStats { EdgeCount = 35043368, OnTraceLength = 6735048.806108156, AllTraceLength = 14990851.204877118 } [PrintingService.cs@2147] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 361, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.79882157171184, Elapsed = 07:18:28.6776640, TimeTotal = 11:38:13.5849520, Remaining = 04:19:44.9072880, Incomplete = False, SoftCount = 566, LayerPrintDone = 361, WeightsDone = 361, WeightDone = 02:38:46.0669836, WeightTotal = 03:30:46.2530100, WeightTotalEstimate = 03:30:46.2530101, LayerRecoatElapsed = 02:25:03.4348917, LayerRecoatDelays = 00:24:18, LayerRecoatPrintLayersElapsed = 01:42:02.4406002, LayerRecoatNoDelayAverage = 00:00:14.9083022, StreamingElapsed = 02:34:20.1519411, ObjectLayerOverheadAverageDuration = 00:00:00.0219466, TimeLayers = 06:57:16.5993802, CoolingElapsed = 00:00:00, CoolingEstimate = 02:26:02.8097831, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:48.0792860, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.6245330, JobElapsed = 04:16:30.5172951, JobTotal = 06:13:59.8955612, WeightEstimate = 00:52:00.1860265 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:12:30. coolingEstimate=02:26:02.8097831 [PrintingService.cs@1912] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.79882157171184;StartedAtUtc;07:18:28.6776640;11:38:13.5849520;04:19:44.9072880;False;566;361;361;02:38:46.0669836;03:30:46.2530100;03:30:46.2530101;02:25:03.4348917;00:24:18;01:42:02.4406002;00:00:14.9083022;02:34:20.1519411;00:00:00.0219466;06:57:16.5993802;00:00:00;02:26:02.8097831;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:48.0792860;00:00:00;00:04:28.6245330;04:16:30.5172951;06:13:59.8955612 [PrintingService.cs@1918] +06/28/2026 03:52:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 361. PrevPreviewWeight=LayerWeight { Index = 360, FillTotalRelative = 0.1799970917241441, FillMaxRelative = 0.4235573412861395, TimeFromPreview = 34.8849588043717, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4235573412861395, PreviewWeight=LayerWeight { Index = 361, FillTotalRelative = 0.17922797641375748, FillMaxRelative = 0.4200794426214307, TimeFromPreview = 35.810479612459154, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0557722. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72040158, XYCompressed = 7054635, LSource = 37473842, LCompressed = 1505959 } [McuMovementClient.cs@491] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633905. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1220515. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72040158, XYCompressed = 7054635, LSource = 37473842, LCompressed = 1505959 } [McuMovementClient.cs@491] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1331508. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72040158, XYCompressed = 7054635, LSource = 37473842, LCompressed = 1505959 } [McuMovementClient.cs@491] +06/28/2026 03:52:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4108.552151408938, PrevLayerFillRatio=0.4235573412861395: Z1=105.1479795109008, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 40256.90009705759, Z2 = 40650 } } [LayerClient.cs@969] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6123574087580 (6123574087580 @ 0) for mcu = 51016.013941 [27/06/2026 01:17:11] (51029.78406316667 sec) to 6126992659076 (from now=6126872659076, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6123574087580 (6123574087580 @ 0) for mcu = 51016.013941 [27/06/2026 01:17:11] (51029.78406316667 sec) to 6126992659076 (from external timestamp, flags=None, requested=6126992659076 (6126992659076 @ 0) for mcu = 51044.502618 [27/06/2026 01:17:40] (51058.27215896667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6123574087580 (6123574087580 @ 0) for mcu = 51016.013941 [27/06/2026 01:17:11] (51029.78406316667 sec) to 6126992659076 (from external timestamp, flags=None, requested=6126992659076 (6126992659076 @ 0) for mcu = 51044.502618 [27/06/2026 01:17:40] (51058.27215896667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:52:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:52:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0619120. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3088606. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72040158, XYCompressed = 7054635, LSource = 37473842, LCompressed = 1505959 } [McuMovementClient.cs@491] +06/28/2026 03:52:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:53:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:53:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:53:07 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 361, Weight=LayerWeight { Index = 361, FillTotalRelative = 0.17922797641375748, FillMaxRelative = 0.4200794426214307, TimeFromPreview = 35.810479612459154, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:53:07 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6129455210300, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:53:07 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6129575214008, flushed existing data. Was Timestamp=0, Now=6129455216555, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:53:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:53:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6126810849435 (6126810849435 @ 0) for mcu = 51042.987557 [27/06/2026 01:17:38] (51056.757078625 sec) to 6129575396297 (from now=6129455396297, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:53:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6126810873451 (1568463583603499 @ 8) for mcu = 51042.987757 [27/06/2026 01:17:38] (51056.75727875973 sec) to 6129575396297 (from now=6129455396297, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:53:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6126810873396 (1568463583589604 @ 8) for mcu = 51042.987757 [27/06/2026 01:17:38] (51056.75727830742 sec) to 6129575396297 (from now=6129455396297, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:53:07 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:53:08 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:53:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:18.6688764. Loops = 75. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.6877914. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72253424, XYCompressed = 7073816, LSource = 37582948, LCompressed = 1508869 } [McuMovementClient.cs@491] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:53:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 361 [PrintingService.cs@2118] +06/28/2026 03:53:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.7048390. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72253424, XYCompressed = 7073816, LSource = 37582948, LCompressed = 1508869 } [McuMovementClient.cs@491] +06/28/2026 03:53:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 362, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.921437177376795, Elapsed = 07:19:10.3482569, TimeTotal = 11:37:58.1729073, Remaining = 04:18:47.8246504, Incomplete = False, SoftCount = 566, LayerPrintDone = 362, WeightsDone = 362, WeightDone = 02:39:06.1298317, WeightTotal = 03:30:28.4860945, WeightTotalEstimate = 03:30:28.4860946, LayerRecoatElapsed = 02:25:25.0426365, LayerRecoatDelays = 00:24:21, LayerRecoatPrintLayersElapsed = 01:42:24.0483449, LayerRecoatNoDelayAverage = 00:00:14.9158986, StreamingElapsed = 02:34:40.1928426, ObjectLayerOverheadAverageDuration = 00:00:00.0219466, TimeLayers = 06:57:05.1830508, CoolingElapsed = 00:00:00, CoolingEstimate = 02:25:58.8140678, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:49.0668180, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7384790, JobElapsed = 04:17:12.1811377, JobTotal = 06:13:47.3777538, WeightEstimate = 00:51:22.3562629 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:12:14. coolingEstimate=02:25:58.8140678 [PrintingService.cs@1912] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.921437177376795;StartedAtUtc;07:19:10.3482569;11:37:58.1729073;04:18:47.8246504;False;566;362;362;02:39:06.1298317;03:30:28.4860945;03:30:28.4860946;02:25:25.0426365;00:24:21;01:42:24.0483449;00:00:14.9158986;02:34:40.1928426;00:00:00.0219466;06:57:05.1830508;00:00:00;02:25:58.8140678;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:49.0668180;00:00:00;00:04:28.7384790;04:17:12.1811377;06:13:47.3777538 [PrintingService.cs@1918] +06/28/2026 03:53:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 361. PreviewWeight=LayerWeight { Index = 361, FillTotalRelative = 0.17922797641375748, FillMaxRelative = 0.4200794426214307, TimeFromPreview = 35.810479612459154, EnergyDensityIncreaseFactor = 0 }, FillArea=19197.083601994702, PreviewFillRatio=0.4200794426214307, Results=4, StreamingSeconds (preview) = 35.810479612459154, StreamingSeconds (extrapolated) = 36.80781694560184, StreamingSeconds (no overhead) = 20.0409015 (02:34:40.1928426), LayerElapsedSeconds=41.6636326, LayerStreamStats=StreamStats { EdgeCount = 105452, OnTraceLength = 20618.10680361092, AllTraceLength = 26472.224478647113 }, TotalStreamStats=StreamStats { EdgeCount = 35148820, OnTraceLength = 6755666.912911767, AllTraceLength = 15017323.429355765 } [PrintingService.cs@2147] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 362, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 62.921440581041836, Elapsed = 07:19:10.3439129, TimeTotal = 11:37:58.1637381, Remaining = 04:18:47.8198252, Incomplete = False, SoftCount = 566, LayerPrintDone = 362, WeightsDone = 362, WeightDone = 02:39:06.1254877, WeightTotal = 03:30:28.4793025, WeightTotalEstimate = 03:30:28.4793026, LayerRecoatElapsed = 02:25:25.0426365, LayerRecoatDelays = 00:24:21, LayerRecoatPrintLayersElapsed = 01:42:24.0483449, LayerRecoatNoDelayAverage = 00:00:14.9158986, StreamingElapsed = 02:34:40.1928426, ObjectLayerOverheadAverageDuration = 00:00:00.0219346, TimeLayers = 06:57:05.1762588, CoolingElapsed = 00:00:00, CoolingEstimate = 02:25:58.8116906, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:49.0668180, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.7384790, JobElapsed = 04:17:12.1833219, JobTotal = 06:13:47.3709618, WeightEstimate = 00:51:22.3538149 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:12:14. coolingEstimate=02:25:58.8116906 [PrintingService.cs@1912] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 62.921440581041836;StartedAtUtc;07:19:10.3439129;11:37:58.1637381;04:18:47.8198252;False;566;362;362;02:39:06.1254877;03:30:28.4793025;03:30:28.4793026;02:25:25.0426365;00:24:21;01:42:24.0483449;00:00:14.9158986;02:34:40.1928426;00:00:00.0219346;06:57:05.1762588;00:00:00;02:25:58.8116906;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:49.0668180;00:00:00;00:04:28.7384790;04:17:12.1833219;06:13:47.3709618 [PrintingService.cs@1918] +06/28/2026 03:53:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 362. PrevPreviewWeight=LayerWeight { Index = 361, FillTotalRelative = 0.17922797641375748, FillMaxRelative = 0.4200794426214307, TimeFromPreview = 35.810479612459154, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4200794426214307, PreviewWeight=LayerWeight { Index = 362, FillTotalRelative = 0.17961193160353375, FillMaxRelative = 0.4222612754755652, TimeFromPreview = 34.91342841656936, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.7280281. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72253424, XYCompressed = 7073816, LSource = 37582948, LCompressed = 1508869 } [McuMovementClient.cs@491] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633304. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.7911653. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72253424, XYCompressed = 7073816, LSource = 37582948, LCompressed = 1508869 } [McuMovementClient.cs@491] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.8052011. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72253424, XYCompressed = 7073816, LSource = 37582948, LCompressed = 1508869 } [McuMovementClient.cs@491] +06/28/2026 03:53:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4102.914677195, PrevLayerFillRatio=0.4200794426214307: Z1=105.00370264613296, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 40361.90379970372, Z2 = 40750 } } [LayerClient.cs@969] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6128212373271 (6128212373271 @ 0) for mcu = 51054.667131 [27/06/2026 01:17:50] (51068.436443925 sec) to 6131993198711 (from now=6131873198711, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6128212373271 (6128212373271 @ 0) for mcu = 51054.667131 [27/06/2026 01:17:50] (51068.436443925 sec) to 6131993198711 (from external timestamp, flags=None, requested=6131993198711 (6131993198711 @ 0) for mcu = 51086.174653 [27/06/2026 01:18:22] (51099.943322591665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6128212373271 (6128212373271 @ 0) for mcu = 51054.667131 [27/06/2026 01:17:50] (51068.436443925 sec) to 6131993198711 (from external timestamp, flags=None, requested=6131993198711 (6131993198711 @ 0) for mcu = 51086.174653 [27/06/2026 01:18:22] (51099.943322591665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:53:29 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0751870 ~ 5.98 samples/sec, 11 resets, 144 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 03:53:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (64 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 03:53:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0754528. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:52.9809748. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72253424, XYCompressed = 7073816, LSource = 37582948, LCompressed = 1508869 } [McuMovementClient.cs@491] +06/28/2026 03:53:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:53:44 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:53:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:53:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 362, Weight=LayerWeight { Index = 362, FillTotalRelative = 0.17961193160353375, FillMaxRelative = 0.4222612754755652, TimeFromPreview = 34.91342841656936, EnergyDensityIncreaseFactor = 0 }, Results=4, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:53:47 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6134325059266, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:53:47 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6134445066022, flushed existing data. Was Timestamp=0, Now=6134325068459, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:53:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:53:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6131857895878 (6131857895878 @ 0) for mcu = 51085.047106 [27/06/2026 01:18:21] (51098.815798983334 sec) to 6134445406328 (from now=6134325406328, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:53:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper x (pin=mcu:PDAC.1) clock moved from 6131857919882 (1569755627489860 @ 8) for mcu = 51085.047306 [27/06/2026 01:18:21] (51098.81599901888 sec) to 6134445406328 (from now=6134325406328, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:53:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper y (pin=mcu:PDAC.4) clock moved from 6131857919879 (1569755627489216 @ 8) for mcu = 51085.047306 [27/06/2026 01:18:21] (51098.81599899792 sec) to 6134445406328 (from now=6134325406328, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:53:47 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:53:48 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:53:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Publish task completed (priority=False) [PrinterClientBase.cs@248] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:18.9984300. Loops = 76. [McuMovementClient.cs@475] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:18.9984300. Loops = 76. GC duration = 00:00:00.3644361. SinceCollect=00:01:22.5720083. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72412506, XYCompressed = 7083975, LSource = 37664588, LCompressed = 1511477 } [McuMovementClient.cs@478] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=128579, gen1=32961, gen2=927, LatencyMode=Interactive, FreeMemory=5726552064, Live=355923448, HeapSizeBytes=368664696, FragmentedBytes=13233184, TotalCommittedBytes=380272640, PinnedObjectsCount=26, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, including movement [PrinterClientBase.cs@195] +06/28/2026 03:54:07 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ending layer 362 [PrintingService.cs@2118] +06/28/2026 03:54:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Starting [LayerClient.cs@1360] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0113634. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72412506, XYCompressed = 7083975, LSource = 37664588, LCompressed = 1511477 } [McuMovementClient.cs@491] +06/28/2026 03:54:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] EndLayer: Completed [LayerClient.cs@1367] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 363, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 63.04404317853846, Elapsed = 07:19:51.2232370, TimeTotal = 11:37:41.5651954, Remaining = 04:17:50.3419584, Incomplete = False, SoftCount = 566, LayerPrintDone = 363, WeightsDone = 363, WeightDone = 02:39:26.4841417, WeightTotal = 03:30:11.7217946, WeightTotalEstimate = 03:30:11.7217947, LayerRecoatElapsed = 02:25:45.5633066, LayerRecoatDelays = 00:24:24, LayerRecoatPrintLayersElapsed = 01:42:44.5690150, LayerRecoatNoDelayAverage = 00:00:14.9212363, StreamingElapsed = 02:35:00.5295620, ObjectLayerOverheadAverageDuration = 00:00:00.0219346, TimeLayers = 06:56:52.8810420, CoolingElapsed = 00:00:00, CoolingEstimate = 02:25:54.5083647, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:49.7607190, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.8185445, JobElapsed = 04:17:53.0582605, JobTotal = 06:13:34.3017785, WeightEstimate = 00:50:45.2376530 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:11:58. coolingEstimate=02:25:54.5083647 [PrintingService.cs@1912] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 63.04404317853846;StartedAtUtc;07:19:51.2232370;11:37:41.5651954;04:17:50.3419584;False;566;363;363;02:39:26.4841417;03:30:11.7217946;03:30:11.7217947;02:25:45.5633066;00:24:24;01:42:44.5690150;00:00:14.9212363;02:35:00.5295620;00:00:00.0219346;06:56:52.8810420;00:00:00;02:25:54.5083647;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:49.7607190;00:00:00;00:04:28.8185445;04:17:53.0582605;06:13:34.3017785 [PrintingService.cs@1918] +06/28/2026 03:54:07 INFO [SLS4All.Compact.Printing.PrintingService] [0] Ended layer 362. PreviewWeight=LayerWeight { Index = 362, FillTotalRelative = 0.17961193160353375, FillMaxRelative = 0.4222612754755652, TimeFromPreview = 34.91342841656936, EnergyDensityIncreaseFactor = 0 }, FillArea=17884.00893948083, PreviewFillRatio=0.4222612754755652, Results=4, StreamingSeconds (preview) = 34.91342841656936, StreamingSeconds (extrapolated) = 36.09422734448668, StreamingSeconds (no overhead) = 20.3367194 (02:35:00.5295620), LayerElapsedSeconds=40.8703688, LayerStreamStats=StreamStats { EdgeCount = 78498, OnTraceLength = 15288.536418810487, AllTraceLength = 20337.49960551411 }, TotalStreamStats=StreamStats { EdgeCount = 35227318, OnTraceLength = 6770955.449330578, AllTraceLength = 15037660.928961279 } [PrintingService.cs@2147] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Layers, PhaseDone = 363, PhaseTotal = 566, Estimate = PrintingEstimate { StartedAtUtc = 27/06/2026 19:38:32, Progress = 63.04404505029873, Elapsed = 07:19:51.2208413, TimeTotal = 11:37:41.5601525, Remaining = 04:17:50.3393112, Incomplete = False, SoftCount = 566, LayerPrintDone = 363, WeightsDone = 363, WeightDone = 02:39:26.4817460, WeightTotal = 03:30:11.7180591, WeightTotalEstimate = 03:30:11.7180591, LayerRecoatElapsed = 02:25:45.5633066, LayerRecoatDelays = 00:24:24, LayerRecoatPrintLayersElapsed = 01:42:44.5690150, LayerRecoatNoDelayAverage = 00:00:14.9212363, StreamingElapsed = 02:35:00.5295620, ObjectLayerOverheadAverageDuration = 00:00:00.0219280, TimeLayers = 06:56:52.8773065, CoolingElapsed = 00:00:00, CoolingEstimate = 02:25:54.5070573, HeatingElapsed = 02:14:39.1757887, HeatingEstimate = 00:00:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:43:00.9974696, BedPreparationTotal = 00:38:49.7607190, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:28.8185445, JobElapsed = 04:17:53.0610946, JobTotal = 06:13:34.2980430, WeightEstimate = 00:50:45.2363131 }, JobName = D790 and D638 and other objects 2026_06_27 }. UTC calculatedEstimate: 06/28/2026 07:11:58. coolingEstimate=02:25:54.5070573 [PrintingService.cs@1912] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 63.04404505029873;StartedAtUtc;07:19:51.2208413;11:37:41.5601525;04:17:50.3393112;False;566;363;363;02:39:26.4817460;03:30:11.7180591;03:30:11.7180591;02:25:45.5633066;00:24:24;01:42:44.5690150;00:00:14.9212363;02:35:00.5295620;00:00:00.0219280;06:56:52.8773065;00:00:00;02:25:54.5070573;02:14:39.1757887;00:00:00;00:00:00;00:00:15;174;00:43:00.9974696;00:38:49.7607190;00:00:00;00:04:28.8185445;04:17:53.0610946;06:13:34.2980430 [PrintingService.cs@1918] +06/28/2026 03:54:07 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin layer 363. PrevPreviewWeight=LayerWeight { Index = 362, FillTotalRelative = 0.17961193160353375, FillMaxRelative = 0.4222612754755652, TimeFromPreview = 34.91342841656936, EnergyDensityIncreaseFactor = 0 }, PrevPreviewFillRatio=0.4222612754755652, PreviewWeight=LayerWeight { Index = 363, FillTotalRelative = 0.08483693174090093, FillMaxRelative = 0.2797706622796891, TimeFromPreview = 17.907749757883042, EnergyDensityIncreaseFactor = 0 } [PrintingService.cs@2089] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0283774. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72412506, XYCompressed = 7083975, LSource = 37664588, LCompressed = 1511477 } [McuMovementClient.cs@491] +06/28/2026 03:54:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632929. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0958301. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72412506, XYCompressed = 7083975, LSource = 37664588, LCompressed = 1511477 } [McuMovementClient.cs@491] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.1079360. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72412506, XYCompressed = 7083975, LSource = 37664588, LCompressed = 1511477 } [McuMovementClient.cs@491] +06/28/2026 03:54:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=100, PowderVolume=4106.451303083246, PrevLayerFillRatio=0.4222612754755652: Z1=105.09421362244065, Z2=100, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1.473684210526316, VolumeFactor=1.1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 22770.061933766803, Z2 = 26000 }, PrintCap = { Z1 = 22770.061933766803, Z2 = 26000 }, BeginLayer = { Z1 = 40466.99801332616, Z2 = 40850 } } [LayerClient.cs@969] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6133212884844 (6133212884844 @ 0) for mcu = 51096.338929 [27/06/2026 01:18:32] (51110.1073737 sec) to 6136898391885 (from now=6136778391885, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6133212884844 (6133212884844 @ 0) for mcu = 51096.338929 [27/06/2026 01:18:32] (51110.1073737 sec) to 6136898391885 (from external timestamp, flags=None, requested=6136898391885 (6136898391885 @ 0) for mcu = 51127.052120 [27/06/2026 01:19:03] (51140.819932375 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6133212884844 (6133212884844 @ 0) for mcu = 51096.338929 [27/06/2026 01:18:32] (51110.1073737 sec) to 6136898391885 (from external timestamp, flags=None, requested=6136898391885 (6136898391885 @ 0) for mcu = 51127.052120 [27/06/2026 01:19:03] (51140.819932375 sec), advance=0) [McuStepper.cs@843] +06/28/2026 03:54:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:54:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0694332. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.2878131. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 72412506, XYCompressed = 7083975, LSource = 37664588, LCompressed = 1511477 } [McuMovementClient.cs@491] +06/28/2026 03:54:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=177, hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:03, keep=True) [LayerClient.cs@1279] +06/28/2026 03:54:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 145 with temperature 134.25 [HeaterCheck.cs@111] +06/28/2026 03:54:23 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Target temperature possibly reached, waiting to settle [LayerClient.cs@1311] +06/28/2026 03:54:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 03:54:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Streaming layer 363, Weight=LayerWeight { Index = 363, FillTotalRelative = 0.08483693174090093, FillMaxRelative = 0.2797706622796891, TimeFromPreview = 17.907749757883042, EnergyDensityIncreaseFactor = 0 }, Results=3, EnergyDensityIncrease=0 [PrintingService.cs@2099] +06/28/2026 03:54:26 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Script task completed [PrinterClientBase.cs@120] +06/28/2026 03:54:26 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L, flushing existing data. This should happen only when a batch is starting, otherwise it is an indication that feeding or processing is too slow at times. Was Timestamp=0, Now=6139049914198, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000 [McuMovementClient.cs@846] +06/28/2026 03:54:26 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Resetting X/Y/L to 6139169918876, flushed existing data. Was Timestamp=0, Now=6139049921287, QueueLow=00:00:00.0500000, QueueHigh=00:00:01, QueueSafe=00:00:00.5250000, Dwelled=0 [McuMovementClient.cs@878] +06/28/2026 03:54:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] X/Y/L reset complete [McuMovementClient.cs@901] +06/28/2026 03:54:26 DBUG [SLS4All.Compact.Printer.McuPrinterClient] [0] Execute task completed, finishing movement [PrinterClientBase.cs@193] +06/28/2026 03:54:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 03:54:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper laser (pin=mcu:P2.0) clock moved from 6136719844720 (6136719844720 @ 0) for mcu = 51125.564176 [27/06/2026 01:19:01] (51139.332039333334 sec) to 6139169942253 (from now=6139049942253, flags=Force, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837]