diff --git "a/Current/logs/default41.log" "b/Current/logs/default41.log" --- "a/Current/logs/default41.log" +++ "b/Current/logs/default41.log" @@ -1,3735 +1,2178 @@ -06/15/2026 19:44:03 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:44:57 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 19:44:57 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:45:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0588929 ~ 6.08 samples/sec, 5 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:46:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0604691 ~ 6.08 samples/sec, 5 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:47:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0782064 ~ 6.08 samples/sec, 5 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:48:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0501314 ~ 6.08 samples/sec, 5 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:49:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0560379 ~ 6.08 samples/sec, 5 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:50:57 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0620031 ~ 6.08 samples/sec, 5 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:51:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0697191 ~ 6.08 samples/sec, 5 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:52:29 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 19:52:29 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:53:04 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 19:53:04 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:54:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0586534 ~ 6.08 samples/sec, 7 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:54:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 19:54:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:55:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0654831 ~ 6.08 samples/sec, 8 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:56:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0607474 ~ 6.08 samples/sec, 8 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:57:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0635640 ~ 6.08 samples/sec, 8 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:57:59 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 19:57:59 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 19:58:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0597465 ~ 6.08 samples/sec, 9 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 19:59:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0768033 ~ 6.08 samples/sec, 9 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:00:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0675380 ~ 6.08 samples/sec, 9 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:01:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0705603 ~ 6.08 samples/sec, 9 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:02:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:02:20 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:02:32 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:02:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:03:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0607841 ~ 6.08 samples/sec, 11 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:03:43 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:03:44 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:03:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:03:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:04:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0487795 ~ 6.08 samples/sec, 13 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:05:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0597954 ~ 6.08 samples/sec, 13 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:06:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0550660 ~ 6.08 samples/sec, 13 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:07:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0641218 ~ 6.08 samples/sec, 13 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:08:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0645050 ~ 6.01 samples/sec, 13 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:09:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0793694 ~ 6.08 samples/sec, 13 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:10:36 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:10:36 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:11:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0593069 ~ 6.08 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:12:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0695110 ~ 6.01 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:13:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0842219 ~ 6.07 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:14:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0824752 ~ 6.07 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:15:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0852223 ~ 6.07 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:16:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0951473 ~ 6.07 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:17:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0833057 ~ 6.07 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:18:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0813203 ~ 6.08 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:19:37 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0882754 ~ 6.07 samples/sec, 14 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:20:09 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:20:09 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:20:26 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:20:26 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:21:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0812138 ~ 6.08 samples/sec, 16 resets, 9 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 20:21:32 WARN [SLS4All.Compact.ComponentModel.PrinterLifetime] [0] Performing ShutdownSystem as requested! [PrinterLifetime.cs@106] -06/15/2026 20:21:32 INFO [Microsoft.Hosting.Lifetime] [0] Application is shutting down... -06/15/2026 20:21:32 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Exiting, trying to disable WatchDog [PrinterWatchDogMonitor.cs@165] -06/15/2026 20:21:32 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin stopped -06/15/2026 20:21:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Cancelled read loop [Mlx90640Camera.cs@326] -06/15/2026 20:21:32 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Saving movement state [MovementClientBase.cs@207] -06/15/2026 20:21:32 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Failed to set pin io-en (mcu:P1.31) [McuManager.cs@438] SLS4All.Compact.Printer.McuException: Unable to read beyond the end of the stream. - at SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy.PipedDevice.ToDeviceHelper.Send(Span`1 message) in /azp/_work/1/s/SLS4All.Compact.McuClient/McuClient/PipedMcu/PipedMcuProxy.cs:line 97 - at SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy.Send(McuCommand command, Int32 priority, McuOccasion clock, Nullable`1 cancelFirst) in /azp/_work/1/s/SLS4All.Compact.McuClient/McuClient/PipedMcu/PipedMcuProxy.cs:line 352 - at SLS4All.Compact.McuClient.Pins.McuDigitalPin.SetAtClock(McuPinValue value, Int32 priority, Int64 clock, Nullable`1 allowInShutdown) in /azp/_work/1/s/SLS4All.Compact.McuClient/McuClient/Pins/McuDigitalPin.cs:line 94 - at SLS4All.Compact.McuClient.Pins.McuDigitalPin.Set(McuPinValue value, Int32 priority, McuTimestamp timestamp) in /azp/_work/1/s/SLS4All.Compact.McuClient/McuClient/Pins/McuDigitalPin.cs:line 79 - at SLS4All.Compact.McuClient.McuManager.<>c__DisplayClass84_0.<b__0>d.MoveNext() in /azp/_work/1/s/SLS4All.Compact.McuClient/McuClient/McuManager.cs:line 430 -06/15/2026 20:21:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu has ended Run() [McuManager.cs@331] -06/15/2026 20:21:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host has ended Run() [McuManager.cs@331] -06/15/2026 20:21:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 has ended Run() [McuManager.cs@331] -06/15/2026 20:21:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] All MCUs finished running -06/15/2026 20:21:32 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager finished running [McuPrinterClient.cs@231] -06/15/2026 20:21:32 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.PipedMcuProxyRunner[1] has been cancelled [McuPrinterClient.cs@170] -06/15/2026 20:21:32 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager reset [McuPrinterClient.cs@242] -06/15/2026 20:21:32 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.McuHostRunner[0] has been cancelled [McuPrinterClient.cs@170] -06/15/2026 20:21:39 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] -06/15/2026 20:21:39 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] -06/15/2026 20:21:39 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] -06/15/2026 20:21:39 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 06/15/2026 19:21:39 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] -06/15/2026 20:21:40 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/15/2026 20:21:40 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] -06/15/2026 20:21:40 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] -06/15/2026 20:21:40 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 20:21:40 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=9f8c53aa-b15c-487c-b774-a6254debf481) -06/15/2026 20:21:40 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] -06/15/2026 20:21:40 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... -Waiting for exit signal... -Successfully set permissions. -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 20:21:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 20:21:40 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] -06/15/2026 20:21:40 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ -06/15/2026 20:21:40 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:21:41 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] -06/15/2026 20:21:41 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 20:21:41 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] -06/15/2026 20:21:41 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 20:21:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 20:21:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] -06/15/2026 20:21:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 20:21:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 20:21:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] -06/15/2026 20:21:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] -06/15/2026 20:21:42 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 -06/15/2026 20:21:42 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. -06/15/2026 20:21:42 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 -06/15/2026 20:21:42 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current -06/15/2026 20:21:42 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] -06/15/2026 20:21:42 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: -/home/ppak/SLS4All/Current/appsettings.toml -/home/ppak/SLS4All/Current/appsettings.Inova.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml -/home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] -06/15/2026 20:21:46 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNMB2DAH5F9V, RemoteIpAddress = 127.0.0.1, RemotePort = 40066, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmjiLkRFK62Di9WvqCBLr20gu0bB2OzNuN1pyLjaHXhzyJJKOEFJ6zT3OfZYjAz8fRqhMOp1BIaMN81VpE4tuqtDGdlaunyE119R6lBAmnbCevSbvlqT-fle3TkSoFjwkhsBb1spzW1DYLcJcmo2XBbmsDh0yS7t1GrkvKeiT8dXxcp54kNLTv0ibJtexofq-ZSazrmHkJdY2CIFiJzKHIuOhjw01WGMGQzG9TOw7OJq7wHDPSKQP76JjlLc4izNVaNrc4ApswfL7rxWOAJhB-0B-D3bajWVmtzFJwcWlHbqxHBEhAsuvWWP4N2_4-8oVouAVh7sYp5S-U6Wi2a3jD6oF9uQbTSUYo9FvbIbyzX-AT8H1ijoVjjvd0jQ5-qcGf-7lLv3yLDBx3jiTPj4wkG9WkY8AxX_KB8cBZ6SAou_u61ZgmMOebJim15YYGtezkb4yPXhlnEjM2eJrc7zG-IXS-1QIDlRFrGx4qTvyuGagq-zieByFXjxoEqt0aZ7-s]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmjiLkRFK62Di9WvqCBLr20gu0bB2OzNuN1pyLjaHXhzyJJKOEFJ6zT3OfZYjAz8fRqhMOp1BIaMN81VpE4tuqtDGdlaunyE119R6lBAmnbCevSbvlqT-fle3TkSoFjwkhsBb1spzW1DYLcJcmo2XBbmsDh0yS7t1GrkvKeiT8dXxcp54kNLTv0ibJtexofq-ZSazrmHkJdY2CIFiJzKHIuOhjw01WGMGQzG9TOw7OJq7wHDPSKQP76JjlLc4izNVaNrc4ApswfL7rxWOAJhB-0B-D3bajWVmtzFJwcWlHbqxHBEhAsuvWWP4N2_4-8oVouAVh7sYp5S-U6Wi2a3jD6oF9uQbTSUYo9FvbIbyzX-AT8H1ijoVjjvd0jQ5-qcGf-7lLv3yLDBx3jiTPj4wkG9WkY8AxX_KB8cBZ6SAou_u61ZgmMOebJim15YYGtezkb4yPXhlnEjM2eJrc7zG-IXS-1QIDlRFrGx4qTvyuGagq-zieByFXjxoEqt0aZ7-s]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] -06/15/2026 20:21:46 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNMB2DAH5F9V, RemoteIpAddress = 127.0.0.1, RemotePort = 40066, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmjiLkRFK62Di9WvqCBLr20gu0bB2OzNuN1pyLjaHXhzyJJKOEFJ6zT3OfZYjAz8fRqhMOp1BIaMN81VpE4tuqtDGdlaunyE119R6lBAmnbCevSbvlqT-fle3TkSoFjwkhsBb1spzW1DYLcJcmo2XBbmsDh0yS7t1GrkvKeiT8dXxcp54kNLTv0ibJtexofq-ZSazrmHkJdY2CIFiJzKHIuOhjw01WGMGQzG9TOw7OJq7wHDPSKQP76JjlLc4izNVaNrc4ApswfL7rxWOAJhB-0B-D3bajWVmtzFJwcWlHbqxHBEhAsuvWWP4N2_4-8oVouAVh7sYp5S-U6Wi2a3jD6oF9uQbTSUYo9FvbIbyzX-AT8H1ijoVjjvd0jQ5-qcGf-7lLv3yLDBx3jiTPj4wkG9WkY8AxX_KB8cBZ6SAou_u61ZgmMOebJim15YYGtezkb4yPXhlnEjM2eJrc7zG-IXS-1QIDlRFrGx4qTvyuGagq-zieByFXjxoEqt0aZ7-s]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmjiLkRFK62Di9WvqCBLr20gu0bB2OzNuN1pyLjaHXhzyJJKOEFJ6zT3OfZYjAz8fRqhMOp1BIaMN81VpE4tuqtDGdlaunyE119R6lBAmnbCevSbvlqT-fle3TkSoFjwkhsBb1spzW1DYLcJcmo2XBbmsDh0yS7t1GrkvKeiT8dXxcp54kNLTv0ibJtexofq-ZSazrmHkJdY2CIFiJzKHIuOhjw01WGMGQzG9TOw7OJq7wHDPSKQP76JjlLc4izNVaNrc4ApswfL7rxWOAJhB-0B-D3bajWVmtzFJwcWlHbqxHBEhAsuvWWP4N2_4-8oVouAVh7sYp5S-U6Wi2a3jD6oF9uQbTSUYo9FvbIbyzX-AT8H1ijoVjjvd0jQ5-qcGf-7lLv3yLDBx3jiTPj4wkG9WkY8AxX_KB8cBZ6SAou_u61ZgmMOebJim15YYGtezkb4yPXhlnEjM2eJrc7zG-IXS-1QIDlRFrGx4qTvyuGagq-zieByFXjxoEqt0aZ7-s]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] -06/15/2026 20:21:46 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNMB2DAH5F9V, RemoteIpAddress = 127.0.0.1, RemotePort = 40066, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmjiLkRFK62Di9WvqCBLr20gu0bB2OzNuN1pyLjaHXhzyJJKOEFJ6zT3OfZYjAz8fRqhMOp1BIaMN81VpE4tuqtDGdlaunyE119R6lBAmnbCevSbvlqT-fle3TkSoFjwkhsBb1spzW1DYLcJcmo2XBbmsDh0yS7t1GrkvKeiT8dXxcp54kNLTv0ibJtexofq-ZSazrmHkJdY2CIFiJzKHIuOhjw01WGMGQzG9TOw7OJq7wHDPSKQP76JjlLc4izNVaNrc4ApswfL7rxWOAJhB-0B-D3bajWVmtzFJwcWlHbqxHBEhAsuvWWP4N2_4-8oVouAVh7sYp5S-U6Wi2a3jD6oF9uQbTSUYo9FvbIbyzX-AT8H1ijoVjjvd0jQ5-qcGf-7lLv3yLDBx3jiTPj4wkG9WkY8AxX_KB8cBZ6SAou_u61ZgmMOebJim15YYGtezkb4yPXhlnEjM2eJrc7zG-IXS-1QIDlRFrGx4qTvyuGagq-zieByFXjxoEqt0aZ7-s]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcmjiLkRFK62Di9WvqCBLr20gu0bB2OzNuN1pyLjaHXhzyJJKOEFJ6zT3OfZYjAz8fRqhMOp1BIaMN81VpE4tuqtDGdlaunyE119R6lBAmnbCevSbvlqT-fle3TkSoFjwkhsBb1spzW1DYLcJcmo2XBbmsDh0yS7t1GrkvKeiT8dXxcp54kNLTv0ibJtexofq-ZSazrmHkJdY2CIFiJzKHIuOhjw01WGMGQzG9TOw7OJq7wHDPSKQP76JjlLc4izNVaNrc4ApswfL7rxWOAJhB-0B-D3bajWVmtzFJwcWlHbqxHBEhAsuvWWP4N2_4-8oVouAVh7sYp5S-U6Wi2a3jD6oF9uQbTSUYo9FvbIbyzX-AT8H1ijoVjjvd0jQ5-qcGf-7lLv3yLDBx3jiTPj4wkG9WkY8AxX_KB8cBZ6SAou_u61ZgmMOebJim15YYGtezkb4yPXhlnEjM2eJrc7zG-IXS-1QIDlRFrGx4qTvyuGagq-zieByFXjxoEqt0aZ7-s]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] -06/15/2026 20:21:47 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] -06/15/2026 20:21:47 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 20:21:47 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 20:21:48 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] -06/15/2026 20:21:48 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 20:21:48 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] -06/15/2026 20:21:48 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] -06/15/2026 20:21:48 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 20:21:48 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 20:21:48 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] -06/15/2026 20:21:48 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] -06/15/2026 20:21:48 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/56669e49-dcbe-41ff-a8a1-c7eeac781c13.sh [SystemPrinterHostname.cs@140] -06/15/2026 20:21:48 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] -06/15/2026 20:21:49 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] -06/15/2026 20:21:51 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 20:21:51 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] -06/15/2026 20:21:52 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] -06/15/2026 20:21:52 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] -06/15/2026 20:21:52 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] -06/15/2026 20:21:52 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/15/2026 20:21:52 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] -06/15/2026 20:21:52 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] -06/15/2026 20:21:52 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] -06/15/2026 20:21:52 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] -06/15/2026 20:21:53 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] -06/15/2026 20:21:53 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! -06/15/2026 20:21:53 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3534960. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=484, gen1=110, gen2=10, LatencyMode=Interactive, FreeMemory=6508298240, Live=290954464, HeapSizeBytes=295275344, FragmentedBytes=4906704, TotalCommittedBytes=331776000, PinnedObjectsCount=24, MemoryLoadBytes=2028145213, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 20:21:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0626368. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0656864. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 20:21:53 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/15/2026 20:21:53 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] -06/15/2026 20:21:53 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] -06/15/2026 20:21:58 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] -06/15/2026 20:22:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 20:22:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:07.3747549. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 20:22:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] -06/15/2026 20:22:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 20:22:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:07.3908723. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 20:22:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 6077392036 (from now=5957392036, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 20:22:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 6423612933 (from now=6303612933, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 20:22:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 6423612933 (from now=6303612933, flags=None, requested=6423612933 (6423612933 @ 0) for mcu = 38.963809 [15/06/2026 19:22:05] (53.530107775 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 20:22:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 6423612933 (from now=6303612933, flags=None, requested=6423612933 (6423612933 @ 0) for mcu = 38.963809 [15/06/2026 19:22:05] (53.530107775 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 20:22:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 20:22:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1996687. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.5125544. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 20:22:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6447612933 (6447612933 @ 0) for mcu = 39.163887 [15/06/2026 19:22:05] (53.730107775 sec) to 6570977381 (from now=6450977381, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.7703278. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:42:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.7869921. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:42:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z1 by distance -210000 [McuMovementClient.cs@545] -06/15/2026 21:42:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:42:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.8032308. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:42:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6447612933 (6447612933 @ 0) for mcu = 39.163934 [15/06/2026 19:22:05] (53.730107775 sec) to 6725534861 (from now=6605534861, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:42:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 6848710548 (from now=6728710548, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:42:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6447612933 (6447612933 @ 0) for mcu = 39.163853 [15/06/2026 19:22:05] (53.730107775 sec) to 6848710548 (from external timestamp, flags=None, requested=6848710548 (6848710548 @ 0) for mcu = 42.506362 [15/06/2026 19:22:09] (57.0725879 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:42:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 6848710548 (from now=6728710548, flags=None, requested=6848710548 (6848710548 @ 0) for mcu = 42.506362 [15/06/2026 19:22:09] (57.0725879 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:42:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:42:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6623313. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.5221928. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:42:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 6928710548 (6928710548 @ 0) for mcu = 43.173079 [15/06/2026 19:22:10] (57.739254566666666 sec) to 7052032140 (from now=6932032140, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:42:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:42:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.3805911. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:42:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 8713204204 (from now=8593204204, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:42:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 6928710548 (6928710548 @ 0) for mcu = 43.172999 [15/06/2026 19:22:10] (57.739254566666666 sec) to 8713204204 (from external timestamp, flags=None, requested=8713204204 (8713204204 @ 0) for mcu = 58.043877 [15/06/2026 19:22:24] (72.61003503333333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:42:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 6928710548 (6928710548 @ 0) for mcu = 43.172999 [15/06/2026 19:22:10] (57.739254566666666 sec) to 8713204204 (from external timestamp, flags=None, requested=8713204204 (8713204204 @ 0) for mcu = 58.043877 [15/06/2026 19:22:24] (72.61003503333333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:42:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:42:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1064558 ~ 6.01 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:43:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:27.4490511. Loops = 110. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:57.0623462. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:43:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:43:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:57.0745042. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:43:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -210000 [McuMovementClient.cs@545] -06/15/2026 21:43:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:43:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:57.0868411. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:43:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 11913204204 (11913204204 @ 0) for mcu = 84.714701 [15/06/2026 19:22:51] (99.2767017 sec) to 12039131730 (from now=11919131730, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:43:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 11913204204 (11913204204 @ 0) for mcu = 84.715016 [15/06/2026 19:22:51] (99.2767017 sec) to 12162627286 (from now=12042627286, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:43:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 12162627286 (from now=12042627286, flags=None, requested=12162627286 (12162627286 @ 0) for mcu = 86.793764 [15/06/2026 19:22:53] (101.35522738333333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:43:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 11913204204 (11913204204 @ 0) for mcu = 84.715016 [15/06/2026 19:22:51] (99.2767017 sec) to 12162627286 (from external timestamp, flags=None, requested=12162627286 (12162627286 @ 0) for mcu = 86.793764 [15/06/2026 19:22:53] (101.35522738333333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:43:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:43:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6656785. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.8105074. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:43:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 12242627286 (12242627286 @ 0) for mcu = 87.460877 [15/06/2026 19:22:54] (102.02189405 sec) to 12365924234 (from now=12245924234, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3373388. SinceCollect=00:01:14.7556014. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=732, gen1=126, gen2=11, LatencyMode=Interactive, FreeMemory=6631374848, Live=307050520, HeapSizeBytes=312706688, FragmentedBytes=5933696, TotalCommittedBytes=323239936, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 12242627286 (12242627286 @ 0) for mcu = 87.463727 [15/06/2026 19:22:54] (102.02189405 sec) to 14156904207 (from now=14036904207, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 14156904207 (from now=14036904207, flags=None, requested=14156904207 (14156904207 @ 0) for mcu = 103.419082 [15/06/2026 19:23:10] (117.974201725 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 12242627286 (12242627286 @ 0) for mcu = 87.463727 [15/06/2026 19:22:54] (102.02189405 sec) to 14156904207 (from external timestamp, flags=None, requested=14156904207 (14156904207 @ 0) for mcu = 103.419082 [15/06/2026 19:23:10] (117.974201725 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:43:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:43:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:27.4613767. Loops = 110. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.6825513. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:43:52 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Success: Wizard has completed successfully [UIToastProvider.cs@98] -06/15/2026 21:43:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0357880 ~ 6.05 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:44:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 21:44:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2674151. SinceCollect=00:01:22.2379488. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 21:44:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=817, gen1=139, gen2=18, LatencyMode=Interactive, FreeMemory=6637256704, Live=253377480, HeapSizeBytes=253883920, FragmentedBytes=749344, TotalCommittedBytes=257753088, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 21:44:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] -06/15/2026 21:44:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0138979. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 17356904207 (17356904207 @ 0) for mcu = 130.084172 [15/06/2026 19:23:36] (144.64086839166666 sec) to 24029341387 (from now=23909341387, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 17356904207 (17356904207 @ 0) for mcu = 130.084168 [15/06/2026 19:23:36] (144.64086839166666 sec) to 24156272621 (from now=24036272621, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 17356904207 (17356904207 @ 0) for mcu = 130.084168 [15/06/2026 19:23:36] (144.64086839166666 sec) to 24156272621 (from now=24036272621, flags=None, requested=24156272621 (24156272621 @ 0) for mcu = 186.743461 [15/06/2026 19:24:33] (201.30227184166668 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 24156272621 (from now=24036272621, flags=None, requested=24156272621 (24156272621 @ 0) for mcu = 186.743461 [15/06/2026 19:24:33] (201.30227184166668 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.2004237. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:02.3005059. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 24180272621 (24180272621 @ 0) for mcu = 186.943309 [15/06/2026 19:24:33] (201.50227184166667 sec) to 24303508119 (from now=24183508119, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5488155. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5610873. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z1 by distance -210000 [McuMovementClient.cs@545] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5727329. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 24180272621 (24180272621 @ 0) for mcu = 186.943204 [15/06/2026 19:24:33] (201.50227184166667 sec) to 24456508646 (from now=24336508646, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 24579922406 (from now=24459922406, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 24180272621 (24180272621 @ 0) for mcu = 186.943065 [15/06/2026 19:24:33] (201.50227184166667 sec) to 24579922406 (from now=24459922406, flags=None, requested=24579922406 (24579922406 @ 0) for mcu = 190.273333 [15/06/2026 19:24:37] (204.83268671666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 24579922406 (from now=24459922406, flags=None, requested=24579922406 (24579922406 @ 0) for mcu = 190.273333 [15/06/2026 19:24:37] (204.83268671666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6648518. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.2934779. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 24659922406 (24659922406 @ 0) for mcu = 190.939724 [15/06/2026 19:24:37] (205.49935338333333 sec) to 24782866465 (from now=24662866465, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0009180. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0142373. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -210000 [McuMovementClient.cs@545] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0250359. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 24659922406 (24659922406 @ 0) for mcu = 190.939533 [15/06/2026 19:24:37] (205.49935338333333 sec) to 24990748444 (from now=24870748444, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 25114310034 (from now=24994310034, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 25114310034 (from now=24994310034, flags=None, requested=25114310034 (25114310034 @ 0) for mcu = 194.725827 [15/06/2026 19:24:41] (209.28591695 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 24659922406 (24659922406 @ 0) for mcu = 190.939464 [15/06/2026 19:24:37] (205.49935338333333 sec) to 25114310034 (from now=24994310034, flags=None, requested=25114310034 (25114310034 @ 0) for mcu = 194.725827 [15/06/2026 19:24:41] (209.28591695 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6657120. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.7482961. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:44:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 25194310034 (25194310034 @ 0) for mcu = 195.392338 [15/06/2026 19:24:42] (209.95258361666666 sec) to 25317484501 (from now=25197484501, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:44:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 354 samples in 00:01:00.0039839 ~ 5.9 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:44:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:44:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.4524037. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:45:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 25194310034 (25194310034 @ 0) for mcu = 195.392062 [15/06/2026 19:24:42] (209.95258361666666 sec) to 25707639602 (from now=25587639602, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:45:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 25707639602 (from now=25587639602, flags=None, requested=25707639602 (25707639602 @ 0) for mcu = 199.669552 [15/06/2026 19:24:46] (214.23033001666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:45:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 25194310034 (25194310034 @ 0) for mcu = 195.392062 [15/06/2026 19:24:42] (209.95258361666666 sec) to 25707639602 (from now=25587639602, flags=None, requested=25707639602 (25707639602 @ 0) for mcu = 199.669552 [15/06/2026 19:24:46] (214.23033001666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:45:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:45:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.3097672. Loops = 38. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:23.3982932. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:45:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 26712647102 (26712647102 @ 0) for mcu = 208.043583 [15/06/2026 19:24:54] (222.60539251666665 sec) to 26834145610 (from now=26714145610, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:45:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 26712647102 (26712647102 @ 0) for mcu = 208.043583 [15/06/2026 19:24:54] (222.60539251666665 sec) to 26834145610 (from now=26714145610, flags=None, requested=26834145610 (26834145610 @ 0) for mcu = 209.056002 [15/06/2026 19:24:55] (223.61788008333335 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:45:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 26712647102 (26712647102 @ 0) for mcu = 208.043583 [15/06/2026 19:24:54] (222.60539251666665 sec) to 26834145610 (from now=26714145610, flags=None, requested=26834145610 (26834145610 @ 0) for mcu = 209.056002 [15/06/2026 19:24:55] (223.61788008333335 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:45:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:45:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1413712. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:24.5523790. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:45:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0649214 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:46:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Starting [LayerClient.cs@629] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2670999. SinceCollect=00:01:40.3314523. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=927, gen1=149, gen2=19, LatencyMode=Interactive, FreeMemory=6645596160, Live=252977616, HeapSizeBytes=253602992, FragmentedBytes=876152, TotalCommittedBytes=257753088, PinnedObjectsCount=24, MemoryLoadBytes=1859133112, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 26850945610 (26850945610 @ 0) for mcu = 209.195853 [15/06/2026 19:24:56] (223.75788008333333 sec) to 36066683354 (from now=35946683354, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 26850945610 (26850945610 @ 0) for mcu = 209.195853 [15/06/2026 19:24:56] (223.75788008333333 sec) to 36066683354 (from now=35946683354, flags=None, requested=36066683354 (36066683354 @ 0) for mcu = 285.991259 [15/06/2026 19:26:12] (300.55569461666664 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 26850945610 (26850945610 @ 0) for mcu = 209.195853 [15/06/2026 19:24:56] (223.75788008333333 sec) to 36066683354 (from now=35946683354, flags=None, requested=36066683354 (36066683354 @ 0) for mcu = 285.991259 [15/06/2026 19:26:12] (300.55569461666664 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:46:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7466911. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:09.8284676. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:46:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 37124323160 (37124323160 @ 0) for mcu = 294.805643 [15/06/2026 19:26:21] (309.36935966666664 sec) to 37245769519 (from now=37125769519, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 37124323160 (37124323160 @ 0) for mcu = 294.805643 [15/06/2026 19:26:21] (309.36935966666664 sec) to 37245769519 (from now=37125769519, flags=None, requested=37245769519 (37245769519 @ 0) for mcu = 295.817679 [15/06/2026 19:26:22] (310.3814126583333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 37124323160 (37124323160 @ 0) for mcu = 294.805643 [15/06/2026 19:26:21] (309.36935966666664 sec) to 37245769519 (from now=37125769519, flags=None, requested=37245769519 (37245769519 @ 0) for mcu = 295.817679 [15/06/2026 19:26:22] (310.3814126583333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:46:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7274113. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6406136. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:46:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 38301809325 (38301809325 @ 0) for mcu = 304.618829 [15/06/2026 19:26:31] (319.181744375 sec) to 38423149779 (from now=38303149779, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 38301809325 (38301809325 @ 0) for mcu = 304.618829 [15/06/2026 19:26:31] (319.181744375 sec) to 38423149779 (from now=38303149779, flags=None, requested=38423149779 (38423149779 @ 0) for mcu = 305.629998 [15/06/2026 19:26:32] (320.192914825 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 38301809325 (38301809325 @ 0) for mcu = 304.618829 [15/06/2026 19:26:31] (319.181744375 sec) to 38423149779 (from now=38303149779, flags=None, requested=38423149779 (38423149779 @ 0) for mcu = 305.629998 [15/06/2026 19:26:32] (320.192914825 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:46:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7279950. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.4549920. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:46:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 39479189585 (39479189585 @ 0) for mcu = 314.431124 [15/06/2026 19:26:41] (328.9932465416667 sec) to 39600748810 (from now=39480748810, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:46:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 39479189585 (39479189585 @ 0) for mcu = 314.431124 [15/06/2026 19:26:41] (328.9932465416667 sec) to 39600748810 (from external timestamp, flags=None, requested=39600748810 (39600748810 @ 0) for mcu = 315.444129 [15/06/2026 19:26:42] (330.00624008333335 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:46:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 39479189585 (39479189585 @ 0) for mcu = 314.431124 [15/06/2026 19:26:41] (328.9932465416667 sec) to 39600748810 (from external timestamp, flags=None, requested=39600748810 (39600748810 @ 0) for mcu = 315.444129 [15/06/2026 19:26:42] (330.00624008333335 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:46:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:46:57 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 21:46:57 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/15/2026 21:46:57 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 21:46:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0448189 ~ 6.05 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:47:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7262959. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.2688348. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:47:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 40656788616 (40656788616 @ 0) for mcu = 324.245155 [15/06/2026 19:26:51] (338.8065718 sec) to 40778352290 (from now=40658352290, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:47:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 40656788616 (40656788616 @ 0) for mcu = 324.245155 [15/06/2026 19:26:51] (338.8065718 sec) to 40778352290 (from external timestamp, flags=None, requested=40778352290 (40778352290 @ 0) for mcu = 325.258206 [15/06/2026 19:26:52] (339.81960241666667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:47:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 40656788616 (40656788616 @ 0) for mcu = 324.245155 [15/06/2026 19:26:51] (338.8065718 sec) to 40778352290 (from external timestamp, flags=None, requested=40778352290 (40778352290 @ 0) for mcu = 325.258206 [15/06/2026 19:26:52] (339.81960241666667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:47:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:47:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7324300. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.0810115. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:47:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Completed [LayerClient.cs@681] -06/15/2026 21:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 21:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2820715. SinceCollect=00:01:07.4237706. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 21:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1007, gen1=157, gen2=20, LatencyMode=Interactive, FreeMemory=6676742144, Live=252115672, HeapSizeBytes=253217512, FragmentedBytes=1357848, TotalCommittedBytes=261193728, PinnedObjectsCount=24, MemoryLoadBytes=1859133112, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 21:47:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634005. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0650587. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0806045. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:47:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 119.42340175052466, Z2 = 150 } } [LayerClient.cs@969] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 41834392096 (41834392096 @ 0) for mcu = 334.059237 [15/06/2026 19:27:00] (348.61993413333335 sec) to 44166983922 (from now=44046983922, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 41834392096 (41834392096 @ 0) for mcu = 334.059237 [15/06/2026 19:27:00] (348.61993413333335 sec) to 44166983922 (from external timestamp, flags=None, requested=44166983922 (44166983922 @ 0) for mcu = 353.498064 [15/06/2026 19:27:20] (368.05819935 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 41834392096 (41834392096 @ 0) for mcu = 334.059237 [15/06/2026 19:27:00] (348.61993413333335 sec) to 44166983922 (from external timestamp, flags=None, requested=44166983922 (44166983922 @ 0) for mcu = 353.498064 [15/06/2026 19:27:20] (368.05819935 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:47:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:47:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2648575. Loops = 34. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.4212678. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:47:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] -06/15/2026 21:47:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 21:47:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] -06/15/2026 21:47:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:47:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:14.4736973. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:47:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 45045812788 (45045812788 @ 0) for mcu = 360.821815 [15/06/2026 19:27:27] (375.3817732333333 sec) to 45893582086 (from now=45773582086, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:47:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 45045812788 (45045812788 @ 0) for mcu = 360.821815 [15/06/2026 19:27:27] (375.3817732333333 sec) to 45893582086 (from external timestamp, flags=None, requested=45893582086 (45893582086 @ 0) for mcu = 367.886759 [15/06/2026 19:27:34] (382.44651738333334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:47:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 45045812788 (45045812788 @ 0) for mcu = 360.821815 [15/06/2026 19:27:27] (375.3817732333333 sec) to 45893582086 (from external timestamp, flags=None, requested=45893582086 (45893582086 @ 0) for mcu = 367.886759 [15/06/2026 19:27:34] (382.44651738333334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:47:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:47:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4636537. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.9488575. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:47:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] -06/15/2026 21:47:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1468420 ~ 6.05 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:48:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0628431 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:49:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0580134 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:50:58 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0753929 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:50:27 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] -06/15/2026 21:50:27 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] -06/15/2026 21:50:27 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] -06/15/2026 21:50:27 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 06/15/2026 20:50:27 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] -06/15/2026 21:50:28 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/15/2026 21:50:28 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] -06/15/2026 21:50:28 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] -06/15/2026 21:50:28 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 21:50:28 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=af715ee0-3fc5-4dc9-8ab4-2d6d7241e4ba) -06/15/2026 21:50:28 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... -Waiting for exit signal... -Successfully set permissions. -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 21:50:28 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 21:50:28 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] -06/15/2026 21:50:28 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] -06/15/2026 21:50:28 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] -06/15/2026 21:50:29 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ -06/15/2026 21:50:29 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 21:50:29 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] -06/15/2026 21:50:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 21:50:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] -06/15/2026 21:50:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 21:50:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 21:50:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] -06/15/2026 21:50:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] -06/15/2026 21:50:32 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 -06/15/2026 21:50:32 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. -06/15/2026 21:50:32 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 -06/15/2026 21:50:32 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current -06/15/2026 21:50:32 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] -06/15/2026 21:50:32 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: -/home/ppak/SLS4All/Current/appsettings.toml -/home/ppak/SLS4All/Current/appsettings.Inova.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml -/home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] -06/15/2026 21:50:35 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 21:50:35 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 21:50:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] -06/15/2026 21:50:37 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 21:50:37 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] -06/15/2026 21:50:37 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 21:50:37 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 21:50:37 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] -06/15/2026 21:50:37 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] -06/15/2026 21:50:38 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 21:50:38 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 21:50:39 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNMB3UV1Q3II, RemoteIpAddress = 127.0.0.1, RemotePort = 59402, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcn4nbgH7Y7X53suwSZaG35ZmjNF2nnu3hkUORGoOa8y1XZBEagNRf61_J7wAbc_R2w0YQfxotneWHD9UfC4MfzuAz7C9zGUoZBcgE1gH4zElYOkcGnxFNDuX0SeyCfS5xKjI4mrOnN49eWEgzg9MKqsNDqLNB3hOrhuGefcdYTdvBuFVeBx-KwP7uJFjRN8AbSCIm-DrZtTKyqXffblowMCQhUfGLmjwP0PQTDxTVCIXJpd4uHQ_3TEye8v0O3lyTK7xz3LNgrXUebH3T5fCSzRBtOSxF-2W_ZgkvjI-waAjE8bBw-4I7ljQSPFwsm3K9a_8JMvofnelnemQ_OIZCYfSypR4DtvEibgJ52A3Dm4_XACIBwOiMap7Ay7EobmNGMatM9MLFur8VVRP4G2f1dRNa5RRvi8sMfd75-1dsyhpCytQx2Dog-WviW2Ce2g7hmTJTDolsUdfncOdJzRp6LgZ2xW497v0glXPuRSS-zJHTLrwwfYFRcf-fSpjGZjk4U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcn4nbgH7Y7X53suwSZaG35ZmjNF2nnu3hkUORGoOa8y1XZBEagNRf61_J7wAbc_R2w0YQfxotneWHD9UfC4MfzuAz7C9zGUoZBcgE1gH4zElYOkcGnxFNDuX0SeyCfS5xKjI4mrOnN49eWEgzg9MKqsNDqLNB3hOrhuGefcdYTdvBuFVeBx-KwP7uJFjRN8AbSCIm-DrZtTKyqXffblowMCQhUfGLmjwP0PQTDxTVCIXJpd4uHQ_3TEye8v0O3lyTK7xz3LNgrXUebH3T5fCSzRBtOSxF-2W_ZgkvjI-waAjE8bBw-4I7ljQSPFwsm3K9a_8JMvofnelnemQ_OIZCYfSypR4DtvEibgJ52A3Dm4_XACIBwOiMap7Ay7EobmNGMatM9MLFur8VVRP4G2f1dRNa5RRvi8sMfd75-1dsyhpCytQx2Dog-WviW2Ce2g7hmTJTDolsUdfncOdJzRp6LgZ2xW497v0glXPuRSS-zJHTLrwwfYFRcf-fSpjGZjk4U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] -06/15/2026 21:50:39 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNMB3UV1Q3II, RemoteIpAddress = 127.0.0.1, RemotePort = 59402, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcn4nbgH7Y7X53suwSZaG35ZmjNF2nnu3hkUORGoOa8y1XZBEagNRf61_J7wAbc_R2w0YQfxotneWHD9UfC4MfzuAz7C9zGUoZBcgE1gH4zElYOkcGnxFNDuX0SeyCfS5xKjI4mrOnN49eWEgzg9MKqsNDqLNB3hOrhuGefcdYTdvBuFVeBx-KwP7uJFjRN8AbSCIm-DrZtTKyqXffblowMCQhUfGLmjwP0PQTDxTVCIXJpd4uHQ_3TEye8v0O3lyTK7xz3LNgrXUebH3T5fCSzRBtOSxF-2W_ZgkvjI-waAjE8bBw-4I7ljQSPFwsm3K9a_8JMvofnelnemQ_OIZCYfSypR4DtvEibgJ52A3Dm4_XACIBwOiMap7Ay7EobmNGMatM9MLFur8VVRP4G2f1dRNa5RRvi8sMfd75-1dsyhpCytQx2Dog-WviW2Ce2g7hmTJTDolsUdfncOdJzRp6LgZ2xW497v0glXPuRSS-zJHTLrwwfYFRcf-fSpjGZjk4U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcn4nbgH7Y7X53suwSZaG35ZmjNF2nnu3hkUORGoOa8y1XZBEagNRf61_J7wAbc_R2w0YQfxotneWHD9UfC4MfzuAz7C9zGUoZBcgE1gH4zElYOkcGnxFNDuX0SeyCfS5xKjI4mrOnN49eWEgzg9MKqsNDqLNB3hOrhuGefcdYTdvBuFVeBx-KwP7uJFjRN8AbSCIm-DrZtTKyqXffblowMCQhUfGLmjwP0PQTDxTVCIXJpd4uHQ_3TEye8v0O3lyTK7xz3LNgrXUebH3T5fCSzRBtOSxF-2W_ZgkvjI-waAjE8bBw-4I7ljQSPFwsm3K9a_8JMvofnelnemQ_OIZCYfSypR4DtvEibgJ52A3Dm4_XACIBwOiMap7Ay7EobmNGMatM9MLFur8VVRP4G2f1dRNa5RRvi8sMfd75-1dsyhpCytQx2Dog-WviW2Ce2g7hmTJTDolsUdfncOdJzRp6LgZ2xW497v0glXPuRSS-zJHTLrwwfYFRcf-fSpjGZjk4U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] -06/15/2026 21:50:39 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNMB3UV1Q3II, RemoteIpAddress = 127.0.0.1, RemotePort = 59402, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcn4nbgH7Y7X53suwSZaG35ZmjNF2nnu3hkUORGoOa8y1XZBEagNRf61_J7wAbc_R2w0YQfxotneWHD9UfC4MfzuAz7C9zGUoZBcgE1gH4zElYOkcGnxFNDuX0SeyCfS5xKjI4mrOnN49eWEgzg9MKqsNDqLNB3hOrhuGefcdYTdvBuFVeBx-KwP7uJFjRN8AbSCIm-DrZtTKyqXffblowMCQhUfGLmjwP0PQTDxTVCIXJpd4uHQ_3TEye8v0O3lyTK7xz3LNgrXUebH3T5fCSzRBtOSxF-2W_ZgkvjI-waAjE8bBw-4I7ljQSPFwsm3K9a_8JMvofnelnemQ_OIZCYfSypR4DtvEibgJ52A3Dm4_XACIBwOiMap7Ay7EobmNGMatM9MLFur8VVRP4G2f1dRNa5RRvi8sMfd75-1dsyhpCytQx2Dog-WviW2Ce2g7hmTJTDolsUdfncOdJzRp6LgZ2xW497v0glXPuRSS-zJHTLrwwfYFRcf-fSpjGZjk4U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrcn4nbgH7Y7X53suwSZaG35ZmjNF2nnu3hkUORGoOa8y1XZBEagNRf61_J7wAbc_R2w0YQfxotneWHD9UfC4MfzuAz7C9zGUoZBcgE1gH4zElYOkcGnxFNDuX0SeyCfS5xKjI4mrOnN49eWEgzg9MKqsNDqLNB3hOrhuGefcdYTdvBuFVeBx-KwP7uJFjRN8AbSCIm-DrZtTKyqXffblowMCQhUfGLmjwP0PQTDxTVCIXJpd4uHQ_3TEye8v0O3lyTK7xz3LNgrXUebH3T5fCSzRBtOSxF-2W_ZgkvjI-waAjE8bBw-4I7ljQSPFwsm3K9a_8JMvofnelnemQ_OIZCYfSypR4DtvEibgJ52A3Dm4_XACIBwOiMap7Ay7EobmNGMatM9MLFur8VVRP4G2f1dRNa5RRvi8sMfd75-1dsyhpCytQx2Dog-WviW2Ce2g7hmTJTDolsUdfncOdJzRp6LgZ2xW497v0glXPuRSS-zJHTLrwwfYFRcf-fSpjGZjk4U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] -06/15/2026 21:50:39 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] -06/15/2026 21:50:39 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] -06/15/2026 21:50:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! -06/15/2026 21:50:40 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:50:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 21:50:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3643943. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 21:50:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=448, gen1=144, gen2=10, LatencyMode=Interactive, FreeMemory=6578896896, Live=292398952, HeapSizeBytes=300727528, FragmentedBytes=9628504, TotalCommittedBytes=339034112, PinnedObjectsCount=1, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 21:50:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:50:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627999. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0691250. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:50:41 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/15/2026 21:50:41 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] -06/15/2026 21:50:41 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] -06/15/2026 21:50:41 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/f3fe78d8-337b-4e48-b22c-522ebf9f8c43.sh [SystemPrinterHostname.cs@140] -06/15/2026 21:50:41 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] -06/15/2026 21:50:41 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] -06/15/2026 21:50:41 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] -06/15/2026 21:50:42 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] -06/15/2026 21:56:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:56:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.6325907. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:56:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] -06/15/2026 21:56:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:56:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.6483505. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:56:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 9959124041 (from now=9839124041, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:56:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 10087675560 (from now=9967675560, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:56:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 10087675560 (from now=9967675560, flags=None, requested=10087675560 (10087675560 @ 0) for mcu = 69.465186 [15/06/2026 20:51:23] (84.063963 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:56:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 10087675560 (from now=9967675560, flags=None, requested=10087675560 (10087675560 @ 0) for mcu = 69.465186 [15/06/2026 20:51:23] (84.063963 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:56:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:56:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1986984. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.9524666. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:56:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 10111675560 (10111675560 @ 0) for mcu = 69.665199 [15/06/2026 20:51:23] (84.263963 sec) to 10234907841 (from now=10114907841, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:56:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:56:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:43.2004829. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:56:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 10111675560 (10111675560 @ 0) for mcu = 69.665230 [15/06/2026 20:51:23] (84.263963 sec) to 10552884906 (from now=10432884906, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:56:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 10111675560 (10111675560 @ 0) for mcu = 69.665230 [15/06/2026 20:51:23] (84.263963 sec) to 10552884906 (from external timestamp, flags=None, requested=10552884906 (10552884906 @ 0) for mcu = 73.341988 [15/06/2026 20:51:27] (87.94070755 sec), advance=0) [McuStepper.cs@843] -06/15/2026 21:56:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 10552884906 (from now=10432884906, flags=None, requested=10552884906 (10552884906 @ 0) for mcu = 73.341988 [15/06/2026 20:51:27] (87.94070755 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:56:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:57:00 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/15/2026 21:57:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 347 samples in 00:01:00.0454905 ~ 5.78 samples/sec, 1 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:57:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.9658253. Loops = 36. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:53.6613513. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:57:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 11516919906 (11516919906 @ 0) for mcu = 81.374521 [15/06/2026 20:51:35] (95.97433255 sec) to 11638592811 (from now=11518592811, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:57:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 11516919906 (11516919906 @ 0) for mcu = 81.374521 [15/06/2026 20:51:35] (95.97433255 sec) to 11638592811 (from now=11518592811, flags=None, requested=11638592811 (11638592811 @ 0) for mcu = 82.388438 [15/06/2026 20:51:36] (96.988273425 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:57:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 11516919906 (11516919906 @ 0) for mcu = 81.374521 [15/06/2026 20:51:35] (95.97433255 sec) to 11638592811 (from now=11518592811, flags=None, requested=11638592811 (11638592811 @ 0) for mcu = 82.388438 [15/06/2026 20:51:36] (96.988273425 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:57:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:57:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1412017. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:54.8160251. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0782830 ~ 6.08 samples/sec, 1 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:58:06 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.1056234 (0.1056234). Stats=NestingStats { ZMax = 23.30000114440918, ChamberVolume = 516694.78125, SinteredVolume = 79855.6640625, Density = 0.1545509398591395 } [ExhaustiveNester.cs@1820] -06/15/2026 21:58:06 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:00.6621074 [CurrentJobAutomatic.razor.cs@103] -06/15/2026 21:58:07 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":79855.664,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"}. Original={"Name":"D790 and D638 Recycled Powder 2026_06_13","CreatedAt":"2026-06-13T14:45:05.1235985+00:00","ObjectFiles":[{"Id":"43d9711e-c7b4-491c-b1c6-efd36f68561e","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"6f68dd76-aeb3-418e-8c93-f7652b2a7884","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"}],"PrintProfile":{"Id":"2a3ba702-dd05-4728-9de0-34e5095682d5","IsEmpty":false},"NestingState":{"ChamberDepth":23.3,"ChamberVolume":516694.781,"SinteredVolume":79855.664,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"888c99c1-65b8-412b-9112-407b451c5f07"} -06/15/2026 21:58:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 21:58:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4747967. SinceCollect=00:02:09.6358876. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 21:58:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=698, gen1=180, gen2=23, LatencyMode=Interactive, FreeMemory=6614810624, Live=255696008, HeapSizeBytes=255822080, FragmentedBytes=473736, TotalCommittedBytes=258441216, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 21:58:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] -06/15/2026 21:58:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0146988. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 11655392811 (11655392811 @ 0) for mcu = 82.526376 [15/06/2026 20:51:36] (97.128273425 sec) to 20759784303 (from now=20639784303, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 11655392811 (11655392811 @ 0) for mcu = 82.526382 [15/06/2026 20:51:36] (97.128273425 sec) to 20886242570 (from now=20766242570, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 11655392811 (11655392811 @ 0) for mcu = 82.526382 [15/06/2026 20:51:36] (97.128273425 sec) to 20886242570 (from now=20766242570, flags=None, requested=20886242570 (20886242570 @ 0) for mcu = 159.445949 [15/06/2026 20:52:53] (174.05202141666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 20886242570 (from now=20766242570, flags=None, requested=20886242570 (20886242570 @ 0) for mcu = 159.445949 [15/06/2026 20:52:53] (174.05202141666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.2027791. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:02.2964435. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 20910242570 (20910242570 @ 0) for mcu = 159.645975 [15/06/2026 20:52:53] (174.25202141666668 sec) to 21033404984 (from now=20913404984, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5450805. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5567145. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z1 by distance -210000 [McuMovementClient.cs@545] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5687043. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 20910242570 (20910242570 @ 0) for mcu = 159.645973 [15/06/2026 20:52:53] (174.25202141666668 sec) to 21186209490 (from now=21066209490, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 21918908500 (from now=21798908500, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 20910242570 (20910242570 @ 0) for mcu = 159.646028 [15/06/2026 20:52:53] (174.25202141666668 sec) to 21918908500 (from now=21798908500, flags=None, requested=21918908500 (21918908500 @ 0) for mcu = 168.051134 [15/06/2026 20:53:02] (182.65757083333332 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 21918908500 (from now=21798908500, flags=None, requested=21918908500 (21918908500 @ 0) for mcu = 168.051134 [15/06/2026 20:53:02] (182.65757083333332 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6627308. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.3686510. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 21998908500 (21998908500 @ 0) for mcu = 168.717802 [15/06/2026 20:53:02] (183.3242375 sec) to 22122103538 (from now=22002103538, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:13.0755264. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:13.0876942. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -210000 [McuMovementClient.cs@545] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:13.1004829. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 21998908500 (21998908500 @ 0) for mcu = 168.717797 [15/06/2026 20:53:02] (183.3242375 sec) to 22329927158 (from now=22209927158, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 22453050274 (from now=22333050274, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 22453050274 (from now=22333050274, flags=None, requested=22453050274 (22453050274 @ 0) for mcu = 172.502148 [15/06/2026 20:53:06] (187.10875228333333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 21998908500 (21998908500 @ 0) for mcu = 168.717829 [15/06/2026 20:53:02] (183.3242375 sec) to 22453050274 (from now=22333050274, flags=None, requested=22453050274 (22453050274 @ 0) for mcu = 172.502148 [15/06/2026 20:53:06] (187.10875228333333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6610901. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:15.8191811. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 22533050274 (22533050274 @ 0) for mcu = 173.168794 [15/06/2026 20:53:07] (187.77541895 sec) to 22656108554 (from now=22536108554, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:17.5292497. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 22533050274 (22533050274 @ 0) for mcu = 173.168893 [15/06/2026 20:53:07] (187.77541895 sec) to 23120893157 (from now=23000893157, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 23120893157 (from now=23000893157, flags=None, requested=23120893157 (23120893157 @ 0) for mcu = 178.067341 [15/06/2026 20:53:12] (192.67410964166666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 22533050274 (22533050274 @ 0) for mcu = 173.168893 [15/06/2026 20:53:07] (187.77541895 sec) to 23120893157 (from now=23000893157, flags=None, requested=23120893157 (23120893157 @ 0) for mcu = 178.067341 [15/06/2026 20:53:12] (192.67410964166666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.3083365. Loops = 38. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.0917025. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:58:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 24125900657 (24125900657 @ 0) for mcu = 186.442251 [15/06/2026 20:53:20] (201.04917214166667 sec) to 24247205480 (from now=24127205480, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 24125900657 (24125900657 @ 0) for mcu = 186.442251 [15/06/2026 20:53:20] (201.04917214166667 sec) to 24247205480 (from now=24127205480, flags=None, requested=24247205480 (24247205480 @ 0) for mcu = 187.453079 [15/06/2026 20:53:21] (202.06004566666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 24125900657 (24125900657 @ 0) for mcu = 186.442251 [15/06/2026 20:53:20] (201.04917214166667 sec) to 24247205480 (from now=24127205480, flags=None, requested=24247205480 (24247205480 @ 0) for mcu = 187.453079 [15/06/2026 20:53:21] (202.06004566666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:58:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:58:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1410269. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2435592. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:59:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 353 samples in 00:01:00.0695154 ~ 5.88 samples/sec, 1 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 21:59:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Starting [LayerClient.cs@629] -06/15/2026 21:59:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:59:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.7043332. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:59:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 24264005480 (24264005480 @ 0) for mcu = 187.593527 [15/06/2026 20:53:21] (202.20004566666665 sec) to 26480947527 (from now=26360947527, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 24264005480 (24264005480 @ 0) for mcu = 187.593527 [15/06/2026 20:53:21] (202.20004566666665 sec) to 26480947527 (from now=26360947527, flags=None, requested=26480947527 (26480947527 @ 0) for mcu = 206.067375 [15/06/2026 20:53:40] (220.674562725 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 24264005480 (24264005480 @ 0) for mcu = 187.593527 [15/06/2026 20:53:21] (202.20004566666665 sec) to 26480947527 (from now=26360947527, flags=None, requested=26480947527 (26480947527 @ 0) for mcu = 206.067375 [15/06/2026 20:53:40] (220.674562725 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:59:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7419666. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:57.5328281. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:59:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 27538587333 (27538587333 @ 0) for mcu = 214.880931 [15/06/2026 20:53:48] (229.488227775 sec) to 27660408012 (from now=27540408012, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 27538587333 (27538587333 @ 0) for mcu = 214.880931 [15/06/2026 20:53:48] (229.488227775 sec) to 27660408012 (from now=27540408012, flags=None, requested=27660408012 (27660408012 @ 0) for mcu = 215.896069 [15/06/2026 20:53:49] (230.5034001 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 27538587333 (27538587333 @ 0) for mcu = 214.880931 [15/06/2026 20:53:48] (229.488227775 sec) to 27660408012 (from now=27540408012, flags=None, requested=27660408012 (27660408012 @ 0) for mcu = 215.896069 [15/06/2026 20:53:49] (230.5034001 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:59:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:09.7286305. Loops = 39. [McuMovementClient.cs@475] -06/15/2026 21:59:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:09.7286305. Loops = 39. GC duration = 00:00:00.4714060. SinceCollect=00:01:07.8148170. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 21:59:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=759, gen1=186, gen2=24, LatencyMode=Interactive, FreeMemory=6661619712, Live=254626208, HeapSizeBytes=255123040, FragmentedBytes=868288, TotalCommittedBytes=259014656, PinnedObjectsCount=24, MemoryLoadBytes=1859133112, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 21:59:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 28716447818 (28716447818 @ 0) for mcu = 224.696384 [15/06/2026 20:53:58] (239.30373181666667 sec) to 28894278650 (from now=28774278650, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 28716447818 (28716447818 @ 0) for mcu = 224.696384 [15/06/2026 20:53:58] (239.30373181666667 sec) to 28894278650 (from now=28774278650, flags=None, requested=28894278650 (28894278650 @ 0) for mcu = 226.178265 [15/06/2026 20:54:00] (240.78565541666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 28716447818 (28716447818 @ 0) for mcu = 224.696384 [15/06/2026 20:53:58] (239.30373181666667 sec) to 28894278650 (from now=28774278650, flags=None, requested=28894278650 (28894278650 @ 0) for mcu = 226.178265 [15/06/2026 20:54:00] (240.78565541666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:59:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7204367. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:09.8145894. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:59:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 29950318456 (29950318456 @ 0) for mcu = 234.978669 [15/06/2026 20:54:09] (249.58598713333333 sec) to 30071963454 (from now=29951963454, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 29950318456 (29950318456 @ 0) for mcu = 234.978669 [15/06/2026 20:54:09] (249.58598713333333 sec) to 30071963454 (from now=29951963454, flags=None, requested=30071963454 (30071963454 @ 0) for mcu = 235.992353 [15/06/2026 20:54:10] (250.59969545 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 29950318456 (29950318456 @ 0) for mcu = 234.978669 [15/06/2026 20:54:09] (249.58598713333333 sec) to 30071963454 (from now=29951963454, flags=None, requested=30071963454 (30071963454 @ 0) for mcu = 235.992353 [15/06/2026 20:54:10] (250.59969545 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:59:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7295524. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6290520. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:59:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 31128003260 (31128003260 @ 0) for mcu = 244.792746 [15/06/2026 20:54:18] (259.4000271666667 sec) to 31249707791 (from now=31129707791, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 31128003260 (31128003260 @ 0) for mcu = 244.792746 [15/06/2026 20:54:18] (259.4000271666667 sec) to 31249707791 (from now=31129707791, flags=None, requested=31249707791 (31249707791 @ 0) for mcu = 245.806931 [15/06/2026 20:54:19] (260.4142315916667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 31128003260 (31128003260 @ 0) for mcu = 244.792746 [15/06/2026 20:54:18] (259.4000271666667 sec) to 31249707791 (from now=31129707791, flags=None, requested=31249707791 (31249707791 @ 0) for mcu = 245.806931 [15/06/2026 20:54:19] (260.4142315916667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 21:59:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 21:59:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7283299. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.4423139. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 21:59:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Completed [LayerClient.cs@681] -06/15/2026 22:00:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0692681 ~ 6.03 samples/sec, 1 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:50.2854397. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629688. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:50.3512544. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:50.3643277. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:00:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=150, PowderVolume=4666.35, PrevLayerFillRatio=0: Z1=119.42340175052466, Z2=150, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 119.42340175052466, Z2 = 150 } } [LayerClient.cs@969] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 32305747597 (32305747597 @ 0) for mcu = 254.607458 [15/06/2026 20:54:28] (269.2145633083333 sec) to 34938112028 (from now=34818112028, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 32305747597 (32305747597 @ 0) for mcu = 254.607458 [15/06/2026 20:54:28] (269.2145633083333 sec) to 34938112028 (from now=34818112028, flags=None, requested=34938112028 (34938112028 @ 0) for mcu = 276.543540 [15/06/2026 20:54:50] (291.15093356666665 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 32305747597 (32305747597 @ 0) for mcu = 254.607458 [15/06/2026 20:54:28] (269.2145633083333 sec) to 34938112028 (from now=34818112028, flags=None, requested=34938112028 (34938112028 @ 0) for mcu = 276.543540 [15/06/2026 20:54:50] (291.15093356666665 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:00:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:00:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:08.2615420. Loops = 34. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.7004599. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:00:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=False) [LayerClient.cs@1279] -06/15/2026 22:00:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:00:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3373390. SinceCollect=00:01:10.5593568. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=822, gen1=192, gen2=25, LatencyMode=Interactive, FreeMemory=6643564544, Live=253578688, HeapSizeBytes=254532560, FragmentedBytes=1287632, TotalCommittedBytes=259014656, PinnedObjectsCount=24, MemoryLoadBytes=1859133112, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 35816940894 (35816940894 @ 0) for mcu = 283.867019 [15/06/2026 20:54:57] (298.47450745 sec) to 37361337116 (from now=37241337116, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 35816940894 (35816940894 @ 0) for mcu = 283.867019 [15/06/2026 20:54:57] (298.47450745 sec) to 37361337116 (from now=37241337116, flags=None, requested=37361337116 (37361337116 @ 0) for mcu = 296.736818 [15/06/2026 20:55:10] (311.34447596666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 35816940894 (35816940894 @ 0) for mcu = 283.867019 [15/06/2026 20:54:57] (298.47450745 sec) to 37361337116 (from now=37241337116, flags=None, requested=37361337116 (37361337116 @ 0) for mcu = 296.736818 [15/06/2026 20:55:10] (311.34447596666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:00:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:00:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4614010. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:01.4746864. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:00:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] -06/15/2026 22:00:55 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 22:00:55 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 22:01:00 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:01:00 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] -06/15/2026 22:01:00 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 22:01:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0814711 ~ 6.06 samples/sec, 2 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:02:43 WARN [SLS4All.Compact.ComponentModel.PrinterLifetime] [0] Performing ShutdownSystem as requested! [PrinterLifetime.cs@106] -06/15/2026 22:02:43 INFO [Microsoft.Hosting.Lifetime] [0] Application is shutting down... -06/15/2026 22:02:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0664442 ~ 6.04 samples/sec, 2 resets, 8 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:03:13 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Exiting, trying to disable WatchDog [PrinterWatchDogMonitor.cs@165] -06/15/2026 22:03:13 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin stopped -06/15/2026 22:03:13 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Saving movement state [MovementClientBase.cs@207] -06/15/2026 22:03:13 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Movement.MovementClientBaseSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:03:13 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 has ended Run() [McuManager.cs@331] -06/15/2026 22:03:13 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu has ended Run() [McuManager.cs@331] -06/15/2026 22:03:13 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host has ended Run() [McuManager.cs@331] -06/15/2026 22:03:13 INFO [SLS4All.Compact.McuClient.McuManager] [0] All MCUs finished running -06/15/2026 22:03:13 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager finished running [McuPrinterClient.cs@231] -06/15/2026 22:03:14 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Cancelled read loop [Mlx90640Camera.cs@326] -06/15/2026 22:03:14 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.PipedMcuProxyRunner[1] has been cancelled [McuPrinterClient.cs@170] -06/15/2026 22:03:14 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager reset [McuPrinterClient.cs@242] -06/15/2026 22:03:14 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.McuHostRunner[0] has been cancelled [McuPrinterClient.cs@170] -06/15/2026 22:03:20 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] -06/15/2026 22:03:20 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] -06/15/2026 22:03:20 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] -06/15/2026 22:03:20 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 06/15/2026 21:03:20 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] -06/15/2026 22:03:21 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/15/2026 22:03:21 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] -06/15/2026 22:03:21 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] -06/15/2026 22:03:21 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] -06/15/2026 22:03:21 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=6b657992-cc69-4a10-ab56-d5a220d1a42b) -06/15/2026 22:03:21 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 22:03:21 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... -Waiting for exit signal... -Successfully set permissions. -06/15/2026 22:03:21 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 22:03:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 22:03:22 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ -06/15/2026 22:03:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 22:03:22 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] -06/15/2026 22:03:22 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid - at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 - at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 - at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 - at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 - at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 -06/15/2026 22:03:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] -06/15/2026 22:03:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] -06/15/2026 22:03:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] -06/15/2026 22:03:23 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] -06/15/2026 22:03:23 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 -06/15/2026 22:03:23 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. -06/15/2026 22:03:23 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 -06/15/2026 22:03:23 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current -06/15/2026 22:03:24 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] -06/15/2026 22:03:24 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: -/home/ppak/SLS4All/Current/appsettings.toml -/home/ppak/SLS4All/Current/appsettings.Inova.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml -/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml -/home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] -06/15/2026 22:03:28 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] -06/15/2026 22:03:28 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] -06/15/2026 22:03:28 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNMB46502FPH, RemoteIpAddress = 127.0.0.1, RemotePort = 38442, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrclTdO9Zsp3XMH1UaleobwxLJvRP9jaSPXAv7WYF__sTHaNd23Zr1B45yW37SdAjRlV09cotF5sodNln23FMPwvjimyJXg-A_Ru70MsdHrczfoPS-txQ6G2jZjldVXcu60arbg4wNblikup5IFQLJdFPoSZnVYHwGfnWouYsqdqmi_dVoD16h9EQoNcDaCF5Yn5x4-UKuOpciKGpJ8GHT033ZrgdLp2FC0mU8Xx9t0lGPfK1VhNEca1RgtRIo_FOAmGGMbhTdewnJ3l2FGjfnyTUrEOWf-116IjQrhwty52EK4EjxK1TOpSBIyAB-RgwFvwF14EpwGObr2qa4N-4RRxayAxc3lw0nc1nYV8SrKWZj7SRCxfLY5GwWZMdu656rEadTP0zrqhah_r-jahOP9wP5vDWaLu7SDPz7aFt6rTILRqv4euytUtg_MHsDee--9ETwShz3t9BhAlpDdBS_RZiVQ6QhkdaMvY-fKvUjlwkvfzcMwryQxgussRXnxNl_lw]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrclTdO9Zsp3XMH1UaleobwxLJvRP9jaSPXAv7WYF__sTHaNd23Zr1B45yW37SdAjRlV09cotF5sodNln23FMPwvjimyJXg-A_Ru70MsdHrczfoPS-txQ6G2jZjldVXcu60arbg4wNblikup5IFQLJdFPoSZnVYHwGfnWouYsqdqmi_dVoD16h9EQoNcDaCF5Yn5x4-UKuOpciKGpJ8GHT033ZrgdLp2FC0mU8Xx9t0lGPfK1VhNEca1RgtRIo_FOAmGGMbhTdewnJ3l2FGjfnyTUrEOWf-116IjQrhwty52EK4EjxK1TOpSBIyAB-RgwFvwF14EpwGObr2qa4N-4RRxayAxc3lw0nc1nYV8SrKWZj7SRCxfLY5GwWZMdu656rEadTP0zrqhah_r-jahOP9wP5vDWaLu7SDPz7aFt6rTILRqv4euytUtg_MHsDee--9ETwShz3t9BhAlpDdBS_RZiVQ6QhkdaMvY-fKvUjlwkvfzcMwryQxgussRXnxNl_lw]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] -06/15/2026 22:03:28 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNMB46502FPH, RemoteIpAddress = 127.0.0.1, RemotePort = 38442, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrclTdO9Zsp3XMH1UaleobwxLJvRP9jaSPXAv7WYF__sTHaNd23Zr1B45yW37SdAjRlV09cotF5sodNln23FMPwvjimyJXg-A_Ru70MsdHrczfoPS-txQ6G2jZjldVXcu60arbg4wNblikup5IFQLJdFPoSZnVYHwGfnWouYsqdqmi_dVoD16h9EQoNcDaCF5Yn5x4-UKuOpciKGpJ8GHT033ZrgdLp2FC0mU8Xx9t0lGPfK1VhNEca1RgtRIo_FOAmGGMbhTdewnJ3l2FGjfnyTUrEOWf-116IjQrhwty52EK4EjxK1TOpSBIyAB-RgwFvwF14EpwGObr2qa4N-4RRxayAxc3lw0nc1nYV8SrKWZj7SRCxfLY5GwWZMdu656rEadTP0zrqhah_r-jahOP9wP5vDWaLu7SDPz7aFt6rTILRqv4euytUtg_MHsDee--9ETwShz3t9BhAlpDdBS_RZiVQ6QhkdaMvY-fKvUjlwkvfzcMwryQxgussRXnxNl_lw]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrclTdO9Zsp3XMH1UaleobwxLJvRP9jaSPXAv7WYF__sTHaNd23Zr1B45yW37SdAjRlV09cotF5sodNln23FMPwvjimyJXg-A_Ru70MsdHrczfoPS-txQ6G2jZjldVXcu60arbg4wNblikup5IFQLJdFPoSZnVYHwGfnWouYsqdqmi_dVoD16h9EQoNcDaCF5Yn5x4-UKuOpciKGpJ8GHT033ZrgdLp2FC0mU8Xx9t0lGPfK1VhNEca1RgtRIo_FOAmGGMbhTdewnJ3l2FGjfnyTUrEOWf-116IjQrhwty52EK4EjxK1TOpSBIyAB-RgwFvwF14EpwGObr2qa4N-4RRxayAxc3lw0nc1nYV8SrKWZj7SRCxfLY5GwWZMdu656rEadTP0zrqhah_r-jahOP9wP5vDWaLu7SDPz7aFt6rTILRqv4euytUtg_MHsDee--9ETwShz3t9BhAlpDdBS_RZiVQ6QhkdaMvY-fKvUjlwkvfzcMwryQxgussRXnxNl_lw]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] -06/15/2026 22:03:28 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNMB46502FPH, RemoteIpAddress = 127.0.0.1, RemotePort = 38442, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrclTdO9Zsp3XMH1UaleobwxLJvRP9jaSPXAv7WYF__sTHaNd23Zr1B45yW37SdAjRlV09cotF5sodNln23FMPwvjimyJXg-A_Ru70MsdHrczfoPS-txQ6G2jZjldVXcu60arbg4wNblikup5IFQLJdFPoSZnVYHwGfnWouYsqdqmi_dVoD16h9EQoNcDaCF5Yn5x4-UKuOpciKGpJ8GHT033ZrgdLp2FC0mU8Xx9t0lGPfK1VhNEca1RgtRIo_FOAmGGMbhTdewnJ3l2FGjfnyTUrEOWf-116IjQrhwty52EK4EjxK1TOpSBIyAB-RgwFvwF14EpwGObr2qa4N-4RRxayAxc3lw0nc1nYV8SrKWZj7SRCxfLY5GwWZMdu656rEadTP0zrqhah_r-jahOP9wP5vDWaLu7SDPz7aFt6rTILRqv4euytUtg_MHsDee--9ETwShz3t9BhAlpDdBS_RZiVQ6QhkdaMvY-fKvUjlwkvfzcMwryQxgussRXnxNl_lw]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8AdnSup0nWRMkPnBgmoTrclTdO9Zsp3XMH1UaleobwxLJvRP9jaSPXAv7WYF__sTHaNd23Zr1B45yW37SdAjRlV09cotF5sodNln23FMPwvjimyJXg-A_Ru70MsdHrczfoPS-txQ6G2jZjldVXcu60arbg4wNblikup5IFQLJdFPoSZnVYHwGfnWouYsqdqmi_dVoD16h9EQoNcDaCF5Yn5x4-UKuOpciKGpJ8GHT033ZrgdLp2FC0mU8Xx9t0lGPfK1VhNEca1RgtRIo_FOAmGGMbhTdewnJ3l2FGjfnyTUrEOWf-116IjQrhwty52EK4EjxK1TOpSBIyAB-RgwFvwF14EpwGObr2qa4N-4RRxayAxc3lw0nc1nYV8SrKWZj7SRCxfLY5GwWZMdu656rEadTP0zrqhah_r-jahOP9wP5vDWaLu7SDPz7aFt6rTILRqv4euytUtg_MHsDee--9ETwShz3t9BhAlpDdBS_RZiVQ6QhkdaMvY-fKvUjlwkvfzcMwryQxgussRXnxNl_lw]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] -06/15/2026 22:03:28 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] -06/15/2026 22:03:29 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] -06/15/2026 22:03:30 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] -06/15/2026 22:03:30 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/95d277ab-5eca-4e06-af4a-75b34fab7233.sh [SystemPrinterHostname.cs@140] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] -06/15/2026 22:03:30 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! -06/15/2026 22:03:30 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:03:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:03:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.5974955. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:03:31 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] -06/15/2026 22:03:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=207, gen1=54, gen2=10, LatencyMode=Interactive, FreeMemory=6410993664, Live=262515856, HeapSizeBytes=266617504, FragmentedBytes=5679312, TotalCommittedBytes=297795584, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:03:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:03:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0611488. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0926922. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:03:31 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] -06/15/2026 22:03:31 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] -06/15/2026 22:03:31 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] -06/15/2026 22:03:37 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] -06/15/2026 22:15:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:15:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:43.3600766. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:15:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] -06/15/2026 22:15:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:15:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:43.3744853. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:15:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 10002981443 (from now=9882981443, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 10131129364 (from now=10011129364, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 10131129364 (from now=10011129364, flags=None, requested=10131129364 (10131129364 @ 0) for mcu = 69.825824 [15/06/2026 21:04:16] (84.42607803333334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 10131129364 (from now=10011129364, flags=None, requested=10131129364 (10131129364 @ 0) for mcu = 69.825824 [15/06/2026 21:04:16] (84.42607803333334 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:15:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1946358. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:45.6836836. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:15:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 10155129364 (10155129364 @ 0) for mcu = 70.025787 [15/06/2026 21:04:17] (84.62607803333333 sec) to 10278141728 (from now=10158141728, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:15:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:46.9322469. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:15:44 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] -06/15/2026 22:15:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 349 samples in 00:01:00.1442644 ~ 5.8 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:15:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] -06/15/2026 22:15:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:15:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:54.2008982. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:15:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 10155129364 (10155129364 @ 0) for mcu = 70.025300 [15/06/2026 21:04:17] (84.62607803333333 sec) to 11298764420 (from now=11178764420, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 10155129364 (10155129364 @ 0) for mcu = 70.025300 [15/06/2026 21:04:17] (84.62607803333333 sec) to 11298764420 (from now=11178764420, flags=None, requested=11298764420 (11298764420 @ 0) for mcu = 79.555577 [15/06/2026 21:04:26] (94.15637016666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 11298764420 (from now=11178764420, flags=None, requested=11298764420 (11298764420 @ 0) for mcu = 79.555577 [15/06/2026 21:04:26] (94.15637016666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:15:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:15:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4547930. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:55.6725724. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:15:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] -06/15/2026 22:16:00 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:16:00 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/15/2026 22:16:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0685219 ~ 6.06 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:16:46 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:16:53 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:16:59 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Starting job: Job has been started! [UIToastProvider.cs@98] -06/15/2026 22:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.6804134. SinceCollect=00:02:07.2214533. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=845, gen1=94, gen2=20, LatencyMode=Interactive, FreeMemory=6163038208, Live=243464352, HeapSizeBytes=242905208, FragmentedBytes=218200, TotalCommittedBytes=243171328, PinnedObjectsCount=25, MemoryLoadBytes=2366169415, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:17:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Starting soft heater, with analysis filename '/surface/analysis_2025-10-21_00-57-47.s4a-sha' and HalogenMaxPercent=100 [PrintingService.cs@1732] -06/15/2026 22:17:01 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loading profile PrinterPath { IsSystemPath = False, PathUnsafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha, PathSafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha } [SoftAnalysisSurfaceHeater.cs@668] -06/15/2026 22:17:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 0, start=0, count=232, Z=0.001 [PrintingService.cs@1518] -06/15/2026 22:17:01 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loaded prepared data from /home/SLS4All/.PrivateData/SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater/analysis_2025-10-21_00-57-47.0DF7023A24F0264E1569792DD4916C75BEE131F0.prepared.json [SoftAnalysisSurfaceHeater.cs@413] -06/15/2026 22:17:01 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Starting heater [SoftAnalysisSurfaceHeater.cs@733] -06/15/2026 22:17:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin heating (soft heater running = True) [PrintingService.cs@2490] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=37.291358947753906, Elapsed=00:00:00 [ControlledHeating.cs@486] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 0, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.322770614434772E-05, Elapsed = 00:00:00.0073364, TimeTotal = 06:07:59.1648034, Remaining = 06:07:59.1574670, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:00.0073364, HeatingEstimate = 01:10:00, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: Progress;StartedAtUtc;Elapsed;TimeTotal;Remaining;Incomplete;SoftCount;LayerPrintDone;WeightsDone;WeightDone;WeightTotal;WeightTotalEstimate;LayerRecoatElapsed;LayerRecoatDelays;LayerRecoatPrintLayersElapsed;LayerRecoatNoDelayAverage;StreamingElapsed;ObjectLayerOverheadAverageDuration;TimeLayers;CoolingElapsed;CoolingEstimate;HeatingElapsed;HeatingEstimate;HeatingEstimate2;HeatingEstimate3;CoolingFrom;BedPreparationElapsed;BedPreparationTotal;PrintCapElapsed;PrintCapTotal;JobElapsed;JobTotal [PrintingService.cs@1916] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.322770614434772E-05;StartedAtUtc;00:00:00.0073364;06:07:59.1648034;06:07:59.1574670;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:00.0073364;01:10:00;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/15/2026 22:17:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Heat-up surface target 20 reached, setting surface run to 168 and after 00:45:00 to 173 [ControlledHeating.cs@566] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=38.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=26.333333333333332,powderChamber1=26.333333333333332,powderChamber2=26.333333333333332,powderChamber3=26.333333333333332,powderChamber4=26.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=26.333333333333332,printChamber1=26.333333333333332,printChamber2=26.333333333333332,printChamber3=26.333333333333332,printChamber4=26.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 38.93844833374023. Used = 38.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 152, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 41.64512252807617 after 00:00:00 [ControlledHeating.cs@493] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.1111127. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633012. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.1772361. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.1914365. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 11354213147 (11354213147 @ 0) for mcu = 80.014532 [15/06/2026 21:04:27] (94.61844289166666 sec) to 20444907846 (from now=20324907846, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 11354213147 (11354213147 @ 0) for mcu = 80.014532 [15/06/2026 21:04:27] (94.61844289166666 sec) to 20444907846 (from now=20324907846, flags=None, requested=20444907846 (20444907846 @ 0) for mcu = 155.768573 [15/06/2026 21:05:42] (170.37423205 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 11354213147 (11354213147 @ 0) for mcu = 80.014532 [15/06/2026 21:04:27] (94.61844289166666 sec) to 20444907846 (from now=20324907846, flags=None, requested=20444907846 (20444907846 @ 0) for mcu = 155.768573 [15/06/2026 21:05:42] (170.37423205 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:17:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:05 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] -06/15/2026 22:17:05 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/15/2026 22:17:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=39.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=27.333333333333332,powderChamber1=27.333333333333332,powderChamber2=27.333333333333332,powderChamber3=27.333333333333332,powderChamber4=27.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 7.5389994, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.034201774894735366, Elapsed = 00:00:07.5514680, TimeTotal = 06:07:59.1699356, Remaining = 06:07:51.6184676, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:07.5514680, HeatingEstimate = 01:09:52.4610006, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.034201774894735366;StartedAtUtc;00:00:07.5514680;06:07:59.1699356;06:07:51.6184676;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:07.5514680;01:09:52.4610006;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/15/2026 22:17:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 39.93844833374023. Used = 39.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=27.333333333333332,printChamber1=27.333333333333332,printChamber2=27.333333333333332,printChamber3=27.333333333333332,printChamber4=27.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 27.333334 with temperature 26.5 [HeaterCheck.cs@67] -06/15/2026 22:17:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:14.3109558. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:17:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=40.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=28.333333333333332,powderChamber1=28.333333333333332,powderChamber2=28.333333333333332,powderChamber3=28.333333333333332,powderChamber4=28.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 40.93844833374023. Used = 40.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 15.0469246, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.0682047757198235, Elapsed = 00:00:15.0590481, TimeTotal = 06:07:59.1695905, Remaining = 06:07:44.1105424, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:15.0590481, HeatingEstimate = 01:09:44.9530754, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.0682047757198235;StartedAtUtc;00:00:15.0590481;06:07:59.1695905;06:07:44.1105424;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:15.0590481;01:09:44.9530754;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=28.333333333333332,printChamber1=28.333333333333332,printChamber2=28.333333333333332,printChamber3=28.333333333333332,printChamber4=28.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 28.333334 with temperature 21.25 [HeaterCheck.cs@88] -06/15/2026 22:17:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 28.333334 with temperature 26 [HeaterCheck.cs@67] -06/15/2026 22:17:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 28.333334 with temperature 26.75 [HeaterCheck.cs@67] -06/15/2026 22:17:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 28.333334 with temperature 25.75 [HeaterCheck.cs@67] -06/15/2026 22:17:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=29.333333333333332,powderChamber1=29.333333333333332,powderChamber2=29.333333333333332,powderChamber3=29.333333333333332,powderChamber4=29.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=41.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 41.93844833374023. Used = 41.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 22.5504964, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.10218925938030557, Elapsed = 00:00:22.5625398, TimeTotal = 06:07:59.1695104, Remaining = 06:07:36.6069706, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:22.5625398, HeatingEstimate = 01:09:37.4495036, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.10218925938030557;StartedAtUtc;00:00:22.5625398;06:07:59.1695104;06:07:36.6069706;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:22.5625398;01:09:37.4495036;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/15/2026 22:17:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=29.333333333333332,printChamber1=29.333333333333332,printChamber2=29.333333333333332,printChamber3=29.333333333333332,printChamber4=29.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 29.333334 with temperature 29.75 [HeaterCheck.cs@67] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 29.333334 with temperature 27 [HeaterCheck.cs@67] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=30.333333333333332,powderChamber1=30.333333333333332,powderChamber2=30.333333333333332,powderChamber3=30.333333333333332,powderChamber4=30.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=42.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 42.93844833374023. Used = 42.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 30.0501009, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.1361558977925608, Elapsed = 00:00:30.0620914, TimeTotal = 06:07:59.1694575, Remaining = 06:07:29.1073661, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:30.0620914, HeatingEstimate = 01:09:29.9498991, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.1361558977925608;StartedAtUtc;00:00:30.0620914;06:07:59.1694575;06:07:29.1073661;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:30.0620914;01:09:29.9498991;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=30.333333333333332,printChamber1=30.333333333333332,printChamber2=30.333333333333332,printChamber3=30.333333333333332,printChamber4=30.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=40.952423095703125, Elapsed=00:00:27.2175405 [ControlledHeating.cs@486] -06/15/2026 22:17:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.333334 with temperature 27.25 [HeaterCheck.cs@67] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 42.69783020019531 after 00:00:30.2183081 [ControlledHeating.cs@493] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:33.3363841. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0626078. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:33.4037217. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:33.4142196. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 21658029074 (21658029074 @ 0) for mcu = 165.881268 [15/06/2026 21:05:52] (180.48357561666666 sec) to 24070863636 (from now=23950863636, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 21658029074 (21658029074 @ 0) for mcu = 165.881268 [15/06/2026 21:05:52] (180.48357561666666 sec) to 24070863636 (from external timestamp, flags=None, requested=24070863636 (24070863636 @ 0) for mcu = 185.989051 [15/06/2026 21:06:13] (200.5905303 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 21658029074 (21658029074 @ 0) for mcu = 165.881268 [15/06/2026 21:05:52] (180.48357561666666 sec) to 24070863636 (from external timestamp, flags=None, requested=24070863636 (24070863636 @ 0) for mcu = 185.989051 [15/06/2026 21:06:13] (200.5905303 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:17:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:17:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.333334 with temperature 26 [HeaterCheck.cs@67] -06/15/2026 22:17:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.333334 with temperature 26 [HeaterCheck.cs@67] -06/15/2026 22:17:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 30.333334 with temperature 28.25 [HeaterCheck.cs@67] -06/15/2026 22:17:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 30.333334 with temperature 27 [HeaterCheck.cs@67] -06/15/2026 22:17:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.333334 with temperature 25.75 [HeaterCheck.cs@67] -06/15/2026 22:17:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=31.333333333333332,powderChamber1=31.333333333333332,powderChamber2=31.333333333333332,powderChamber3=31.333333333333332,powderChamber4=31.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=43.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 43.93844833374023. Used = 43.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 37.5575352, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.170158124448598, Elapsed = 00:00:37.5695006, TimeTotal = 06:07:59.1694324, Remaining = 06:07:21.5999318, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:30.1172188, WeightTotalEstimate = 01:01:30.1172188, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:36.6574670, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:37.5695006, HeatingEstimate = 01:09:22.4424648, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:57.2189100, WeightEstimate = 01:01:30.1172188 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:00. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.170158124448598;StartedAtUtc;00:00:37.5695006;06:07:59.1694324;06:07:21.5999318;False;232;0;0;00:00:00;01:01:30.1172188;01:01:30.1172188;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:36.6574670;00:00:00;02:00:00;00:00:37.5695006;01:09:22.4424648;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:57.2189100 [PrintingService.cs@1918] -06/15/2026 22:17:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=31.333333333333332,printChamber1=31.333333333333332,printChamber2=31.333333333333332,printChamber3=31.333333333333332,printChamber4=31.333333333333332 [ControlledHeating.cs@169] -06/15/2026 22:17:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262528, estimate=49.8886286083513 for layer 0, Z=0.001 [PrintingService.cs@1524] -06/15/2026 22:17:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 10 [PrintingService.cs@1569] -06/15/2026 22:17:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 1, start=0, count=232, Z=0.101 [PrintingService.cs@1518] -06/15/2026 22:17:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.333334 with temperature 26.5 [HeaterCheck.cs@67] -06/15/2026 22:17:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 255, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:17:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 31.333334 with temperature 28.5 [HeaterCheck.cs@67] -06/15/2026 22:17:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.333334 with temperature 27 [HeaterCheck.cs@67] -06/15/2026 22:17:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.333334 with temperature 26.75 [HeaterCheck.cs@67] -06/15/2026 22:17:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.1056460 ~ 5.86 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:17:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 31.333334 with temperature 28.75 [HeaterCheck.cs@67] -06/15/2026 22:17:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9749349. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:44.5197087. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:17:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:17:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:17:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=32.33333333333333,powderChamber1=32.33333333333333,powderChamber2=32.33333333333333,powderChamber3=32.33333333333333,powderChamber4=32.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:17:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=44.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 44.93844833374023. Used = 44.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 45.0637464, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.2043994249560705, Elapsed = 00:00:45.0757183, TimeTotal = 06:07:32.7617970, Remaining = 06:06:47.6860787, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.7095769, WeightTotalEstimate = 01:01:03.7095769, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:10.2498251, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:45.0757183, HeatingEstimate = 01:09:14.9362536, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.8112681, WeightEstimate = 01:01:03.7095769 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.2043994249560705;StartedAtUtc;00:00:45.0757183;06:07:32.7617970;06:06:47.6860787;False;232;0;0;00:00:00;01:01:03.7095769;01:01:03.7095769;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:10.2498251;00:00:00;02:00:00;00:00:45.0757183;01:09:14.9362536;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.8112681 [PrintingService.cs@1918] -06/15/2026 22:17:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=32.33333333333333,printChamber1=32.33333333333333,printChamber2=32.33333333333333,printChamber3=32.33333333333333,printChamber4=32.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:17:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 32.333332 with temperature 28.25 [HeaterCheck.cs@67] -06/15/2026 22:17:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 32.333332 with temperature 27.75 [HeaterCheck.cs@67] -06/15/2026 22:17:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 32.333332 with temperature 27.75 [HeaterCheck.cs@67] -06/15/2026 22:17:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.333332 with temperature 27.5 [HeaterCheck.cs@67] -06/15/2026 22:17:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 32.333332 with temperature 29 [HeaterCheck.cs@67] -06/15/2026 22:17:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.333332 with temperature 28.25 [HeaterCheck.cs@67] -06/15/2026 22:17:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=21.25 that are outside of set tolerance 10 for current step target 32.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:17:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=45.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:17:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 45.93844833374023. Used = 45.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:17:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 52.5682594, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.23842930082607897, Elapsed = 00:00:52.5802458, TimeTotal = 06:07:32.7618115, Remaining = 06:06:40.1815657, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.7095769, WeightTotalEstimate = 01:01:03.7095769, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:10.2498251, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:52.5802458, HeatingEstimate = 01:09:07.4317406, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.8112681, WeightEstimate = 01:01:03.7095769 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:17:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.23842930082607897;StartedAtUtc;00:00:52.5802458;06:07:32.7618115;06:06:40.1815657;False;232;0;0;00:00:00;01:01:03.7095769;01:01:03.7095769;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:10.2498251;00:00:00;02:00:00;00:00:52.5802458;01:09:07.4317406;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.8112681 [PrintingService.cs@1918] -06/15/2026 22:17:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=33.33333333333333,printChamber1=33.33333333333333,printChamber2=33.33333333333333,printChamber3=33.33333333333333,printChamber4=33.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:17:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=33.33333333333333,powderChamber1=33.33333333333333,powderChamber2=33.33333333333333,powderChamber3=33.33333333333333,powderChamber4=33.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:17:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.333332 with temperature 30.5 [HeaterCheck.cs@67] -06/15/2026 22:17:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33.333332 with temperature 28.75 [HeaterCheck.cs@67] -06/15/2026 22:17:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 33.333332 with temperature 30.25 [HeaterCheck.cs@67] -06/15/2026 22:17:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.333332 with temperature 29 [HeaterCheck.cs@67] -06/15/2026 22:17:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 33.333332 with temperature 29.25 [HeaterCheck.cs@67] -06/15/2026 22:18:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=46.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 46.93844833374023. Used = 46.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 60.0772725, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.27247995127342306, Elapsed = 00:01:00.0893549, TimeTotal = 06:07:32.7619075, Remaining = 06:06:32.6725526, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.7095769, WeightTotalEstimate = 01:01:03.7095769, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:10.2498251, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:00.0893549, HeatingEstimate = 01:08:59.9227275, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.8112681, WeightEstimate = 01:01:03.7095769 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.27247995127342306;StartedAtUtc;00:01:00.0893549;06:07:32.7619075;06:06:32.6725526;False;232;0;0;00:00:00;01:01:03.7095769;01:01:03.7095769;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:10.2498251;00:00:00;02:00:00;00:01:00.0893549;01:08:59.9227275;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.8112681 [PrintingService.cs@1918] -06/15/2026 22:18:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=34.33333333333333,printChamber1=34.33333333333333,printChamber2=34.33333333333333,printChamber3=34.33333333333333,printChamber4=34.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=45.51463317871094, Elapsed=00:00:27.2070965 [ControlledHeating.cs@486] -06/15/2026 22:18:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=34.33333333333333,powderChamber1=34.33333333333333,powderChamber2=34.33333333333333,powderChamber3=34.33333333333333,powderChamber4=34.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.333332 with temperature 30 [HeaterCheck.cs@67] -06/15/2026 22:18:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.333332 with temperature 30.5 [HeaterCheck.cs@67] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 46.161582946777344 after 00:00:30.2062364 [ControlledHeating.cs@493] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2921368. SinceCollect=00:01:03.8342735. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=954, gen1=102, gen2=22, LatencyMode=Interactive, FreeMemory=5969854464, Live=442288592, HeapSizeBytes=445954464, FragmentedBytes=3941208, TotalCommittedBytes=454868992, PinnedObjectsCount=27, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (37 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631607. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0651564. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0774881. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:18:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 25282384864 (25282384864 @ 0) for mcu = 196.086532 [15/06/2026 21:06:23] (210.68654053333333 sec) to 27730297186 (from now=27610297186, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 25282384864 (25282384864 @ 0) for mcu = 196.086532 [15/06/2026 21:06:23] (210.68654053333333 sec) to 27730297186 (from external timestamp, flags=None, requested=27730297186 (27730297186 @ 0) for mcu = 216.486993 [15/06/2026 21:06:43] (231.08580988333333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 25282384864 (25282384864 @ 0) for mcu = 196.086532 [15/06/2026 21:06:23] (210.68654053333333 sec) to 27730297186 (from external timestamp, flags=None, requested=27730297186 (27730297186 @ 0) for mcu = 216.486993 [15/06/2026 21:06:43] (231.08580988333333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.333332 with temperature 29.5 [HeaterCheck.cs@67] -06/15/2026 22:18:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=47.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 47.93844833374023. Used = 47.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 67.5833032, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.30651616296114803, Elapsed = 00:01:07.5952793, TimeTotal = 06:07:32.7618012, Remaining = 06:06:25.1665219, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.7095769, WeightTotalEstimate = 01:01:03.7095769, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:10.2498251, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:07.5952793, HeatingEstimate = 01:08:52.4166968, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.8112681, WeightEstimate = 01:01:03.7095769 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.30651616296114803;StartedAtUtc;00:01:07.5952793;06:07:32.7618012;06:06:25.1665219;False;232;0;0;00:00:00;01:01:03.7095769;01:01:03.7095769;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:10.2498251;00:00:00;02:00:00;00:01:07.5952793;01:08:52.4166968;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.8112681 [PrintingService.cs@1918] -06/15/2026 22:18:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=35.33333333333333,printChamber1=35.33333333333333,printChamber2=35.33333333333333,printChamber3=35.33333333333333,printChamber4=35.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=35.33333333333333,powderChamber1=35.33333333333333,powderChamber2=35.33333333333333,powderChamber3=35.33333333333333,powderChamber4=35.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 35.333332 with temperature 30.75 [HeaterCheck.cs@67] -06/15/2026 22:18:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 35.333332 with temperature 31.5 [HeaterCheck.cs@67] -06/15/2026 22:18:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9952966. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1913001. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:18:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:18:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:18:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=48.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 48.93844833374023. Used = 48.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 75.0844176, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.34053052133615924, Elapsed = 00:01:15.0963847, TimeTotal = 06:07:32.7617922, Remaining = 06:06:17.6654075, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:03.7095769, WeightTotalEstimate = 01:01:03.7095769, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:10.2498251, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:15.0963847, HeatingEstimate = 01:08:44.9155824, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:30.8112681, WeightEstimate = 01:01:03.7095769 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.34053052133615924;StartedAtUtc;00:01:15.0963847;06:07:32.7617922;06:06:17.6654075;False;232;0;0;00:00:00;01:01:03.7095769;01:01:03.7095769;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:10.2498251;00:00:00;02:00:00;00:01:15.0963847;01:08:44.9155824;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:30.8112681 [PrintingService.cs@1918] -06/15/2026 22:18:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=36.33333333333333,printChamber1=36.33333333333333,printChamber2=36.33333333333333,printChamber3=36.33333333333333,printChamber4=36.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=36.33333333333333,powderChamber1=36.33333333333333,powderChamber2=36.33333333333333,powderChamber3=36.33333333333333,powderChamber4=36.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=350812, estimate=49.82703132819577 for layer 1, Z=0.101 [PrintingService.cs@1524] -06/15/2026 22:18:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 10 [PrintingService.cs@1569] -06/15/2026 22:18:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 2, start=0, count=232, Z=0.201 [PrintingService.cs@1518] -06/15/2026 22:18:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 278, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:18:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 36.333332 with temperature 32.75 [HeaterCheck.cs@67] -06/15/2026 22:18:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=49.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 49.93844833374023. Used = 49.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 82.5896901, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.3742312165100805, Elapsed = 00:01:22.6016805, TimeTotal = 06:07:52.3651197, Remaining = 06:06:29.7634392, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.3128811, WeightTotalEstimate = 01:01:23.3128811, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.8531293, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:22.6016805, HeatingEstimate = 01:08:37.4103099, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.4145723, WeightEstimate = 01:01:23.3128811 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3742312165100805;StartedAtUtc;00:01:22.6016805;06:07:52.3651197;06:06:29.7634392;False;232;0;0;00:00:00;01:01:23.3128811;01:01:23.3128811;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.8531293;00:00:00;02:00:00;00:01:22.6016805;01:08:37.4103099;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.4145723 [PrintingService.cs@1918] -06/15/2026 22:18:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=37.33333333333333,printChamber1=37.33333333333333,printChamber2=37.33333333333333,printChamber3=37.33333333333333,printChamber4=37.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 37.333332 with temperature 31.25 [HeaterCheck.cs@88] -06/15/2026 22:18:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 37.333332 with temperature 36.75 [HeaterCheck.cs@67] -06/15/2026 22:18:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=37.33333333333333,powderChamber1=37.33333333333333,powderChamber2=37.33333333333333,powderChamber3=37.33333333333333,powderChamber4=37.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 37.333332 with temperature 33.5 [HeaterCheck.cs@67] -06/15/2026 22:18:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 37.333332 with temperature 35.5 [HeaterCheck.cs@67] -06/15/2026 22:18:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=50.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 50.93844833374023. Used = 50.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 90.1008483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.4082608161664147, Elapsed = 00:01:30.1128179, TimeTotal = 06:07:52.3650989, Remaining = 06:06:22.2522810, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.3128811, WeightTotalEstimate = 01:01:23.3128811, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.8531293, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:30.1128179, HeatingEstimate = 01:08:29.8991517, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.4145723, WeightEstimate = 01:01:23.3128811 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4082608161664147;StartedAtUtc;00:01:30.1128179;06:07:52.3650989;06:06:22.2522810;False;232;0;0;00:00:00;01:01:23.3128811;01:01:23.3128811;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.8531293;00:00:00;02:00:00;00:01:30.1128179;01:08:29.8991517;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.4145723 [PrintingService.cs@1918] -06/15/2026 22:18:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=38.33333333333333,printChamber1=38.33333333333333,printChamber2=38.33333333333333,printChamber3=38.33333333333333,printChamber4=38.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=48.94157791137695, Elapsed=00:00:27.5119332 [ControlledHeating.cs@486] -06/15/2026 22:18:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=26.25 that are outside of set tolerance 10 for current step target 37.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 50.625213623046875 after 00:00:30.5122762 [ControlledHeating.cs@493] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2127953. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633513. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2781184. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2902623. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:18:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 28941818414 (28941818414 @ 0) for mcu = 226.583437 [15/06/2026 21:06:53] (241.18182011666667 sec) to 31355713065 (from now=31235713065, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 28941818414 (28941818414 @ 0) for mcu = 226.583437 [15/06/2026 21:06:53] (241.18182011666667 sec) to 31355713065 (from external timestamp, flags=None, requested=31355713065 (31355713065 @ 0) for mcu = 246.700338 [15/06/2026 21:07:13] (261.297608875 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 28941818414 (28941818414 @ 0) for mcu = 226.583437 [15/06/2026 21:06:53] (241.18182011666667 sec) to 31355713065 (from external timestamp, flags=None, requested=31355713065 (31355713065 @ 0) for mcu = 246.700338 [15/06/2026 21:07:13] (261.297608875 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:18:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:18:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 38.333332 with temperature 37.25 [HeaterCheck.cs@67] -06/15/2026 22:18:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=51.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 51.93844833374023. Used = 51.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 97.6070042, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.4422679308714445, Elapsed = 00:01:37.6189925, TimeTotal = 06:07:52.3651176, Remaining = 06:06:14.7461251, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.3128811, WeightTotalEstimate = 01:01:23.3128811, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.8531293, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:37.6189925, HeatingEstimate = 01:08:22.3929958, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.4145723, WeightEstimate = 01:01:23.3128811 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4422679308714445;StartedAtUtc;00:01:37.6189925;06:07:52.3651176;06:06:14.7461251;False;232;0;0;00:00:00;01:01:23.3128811;01:01:23.3128811;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.8531293;00:00:00;02:00:00;00:01:37.6189925;01:08:22.3929958;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.4145723 [PrintingService.cs@1918] -06/15/2026 22:18:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=39.33333333333333,printChamber1=39.33333333333333,printChamber2=39.33333333333333,printChamber3=39.33333333333333,printChamber4=39.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=38.33333333333333,powderChamber1=38.33333333333333,powderChamber2=38.33333333333333,powderChamber3=38.33333333333333,powderChamber4=38.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 39.333332 with temperature 37 [HeaterCheck.cs@67] -06/15/2026 22:18:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0884493 ~ 6.01 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:18:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=52.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 52.93844833374023. Used = 52.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 105.1093078, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.47625849742430804, Elapsed = 00:01:45.1215155, TimeTotal = 06:07:52.3653370, Remaining = 06:06:07.2438215, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.3128811, WeightTotalEstimate = 01:01:23.3128811, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.8531293, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:45.1215155, HeatingEstimate = 01:08:14.8906922, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.4145723, WeightEstimate = 01:01:23.3128811 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.47625849742430804;StartedAtUtc;00:01:45.1215155;06:07:52.3653370;06:06:07.2438215;False;232;0;0;00:00:00;01:01:23.3128811;01:01:23.3128811;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.8531293;00:00:00;02:00:00;00:01:45.1215155;01:08:14.8906922;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.4145723 [PrintingService.cs@1918] -06/15/2026 22:18:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=40.33333333333333,printChamber1=40.33333333333333,printChamber2=40.33333333333333,printChamber3=40.33333333333333,printChamber4=40.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3894248. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:18:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:18:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:18:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 38.333332 with temperature 33.75 [HeaterCheck.cs@67] -06/15/2026 22:18:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=27.5 that are outside of set tolerance 10 for current step target 38.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:18:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=53.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:18:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 53.93844833374023. Used = 53.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:18:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 112.6109416, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.5102439873203324, Elapsed = 00:01:52.6229158, TimeTotal = 06:07:52.3651035, Remaining = 06:05:59.7421877, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.3128811, WeightTotalEstimate = 01:01:23.3128811, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:29.8531293, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:52.6229158, HeatingEstimate = 01:08:07.3890584, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:50.4145723, WeightEstimate = 01:01:23.3128811 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:18:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5102439873203324;StartedAtUtc;00:01:52.6229158;06:07:52.3651035;06:05:59.7421877;False;232;0;0;00:00:00;01:01:23.3128811;01:01:23.3128811;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:29.8531293;00:00:00;02:00:00;00:01:52.6229158;01:08:07.3890584;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:50.4145723 [PrintingService.cs@1918] -06/15/2026 22:18:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=41.33333333333333,printChamber1=41.33333333333333,printChamber2=41.33333333333333,printChamber3=41.33333333333333,printChamber4=41.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:18:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 41.333332 with temperature 42.5 [HeaterCheck.cs@67] -06/15/2026 22:19:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262487, estimate=50.01604465013389 for layer 2, Z=0.201 [PrintingService.cs@1524] -06/15/2026 22:19:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 10 [PrintingService.cs@1569] -06/15/2026 22:19:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 3, start=0, count=232, Z=0.301 [PrintingService.cs@1518] -06/15/2026 22:19:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 264, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:19:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=54.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 54.93844833374023. Used = 54.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 120.1152733, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.5442264098964591, Elapsed = 00:02:00.1272663, TimeTotal = 06:07:53.0313920, Remaining = 06:05:52.9041257, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.9791508, WeightTotalEstimate = 01:01:23.9791508, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.5193990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:00.1272663, HeatingEstimate = 01:07:59.8847267, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:51.0808420, WeightEstimate = 01:01:23.9791508 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5442264098964591;StartedAtUtc;00:02:00.1272663;06:07:53.0313920;06:05:52.9041257;False;232;0;0;00:00:00;01:01:23.9791508;01:01:23.9791508;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.5193990;00:00:00;02:00:00;00:02:00.1272663;01:07:59.8847267;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:51.0808420 [PrintingService.cs@1918] -06/15/2026 22:19:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=42.33333333333333,printChamber1=42.33333333333333,printChamber2=42.33333333333333,printChamber3=42.33333333333333,printChamber4=42.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=54.721527099609375, Elapsed=00:00:27.2038114 [ControlledHeating.cs@486] -06/15/2026 22:19:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 53.73783493041992 after 00:00:30.2078750 [ControlledHeating.cs@493] -06/15/2026 22:19:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4053055. SinceCollect=00:01:00.8262524. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1059, gen1=108, gen2=23, LatencyMode=Interactive, FreeMemory=5996331008, Live=441412856, HeapSizeBytes=445758280, FragmentedBytes=4849200, TotalCommittedBytes=455426048, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632985. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0674312. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0782726. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:19:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 32567234293 (32567234293 @ 0) for mcu = 256.796140 [15/06/2026 21:07:23] (271.3936191083333 sec) to 35029531346 (from now=34909531346, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 32567234293 (32567234293 @ 0) for mcu = 256.796140 [15/06/2026 21:07:23] (271.3936191083333 sec) to 35029531346 (from external timestamp, flags=None, requested=35029531346 (35029531346 @ 0) for mcu = 277.316127 [15/06/2026 21:07:44] (291.9127612166667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 32567234293 (32567234293 @ 0) for mcu = 256.796140 [15/06/2026 21:07:23] (271.3936191083333 sec) to 35029531346 (from external timestamp, flags=None, requested=35029531346 (35029531346 @ 0) for mcu = 277.316127 [15/06/2026 21:07:44] (291.9127612166667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:19:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=55.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 55.93844833374023. Used = 55.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 127.6200483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.5782260608326625, Elapsed = 00:02:07.6320198, TimeTotal = 06:07:53.0313705, Remaining = 06:05:45.3993507, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.9791508, WeightTotalEstimate = 01:01:23.9791508, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.5193990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:07.6320198, HeatingEstimate = 01:07:52.3799517, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:51.0808420, WeightEstimate = 01:01:23.9791508 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5782260608326625;StartedAtUtc;00:02:07.6320198;06:07:53.0313705;06:05:45.3993507;False;232;0;0;00:00:00;01:01:23.9791508;01:01:23.9791508;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.5193990;00:00:00;02:00:00;00:02:07.6320198;01:07:52.3799517;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:51.0808420 [PrintingService.cs@1918] -06/15/2026 22:19:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=43.33333333333333,printChamber1=43.33333333333333,printChamber2=43.33333333333333,printChamber3=43.33333333333333,printChamber4=43.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=56.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 56.93844833374023. Used = 56.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 135.1196352, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.6122039411190202, Elapsed = 00:02:15.1319702, TimeTotal = 06:07:53.0317340, Remaining = 06:05:37.8997638, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.9791508, WeightTotalEstimate = 01:01:23.9791508, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.5193990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:15.1319702, HeatingEstimate = 01:07:44.8803648, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:51.0808420, WeightEstimate = 01:01:23.9791508 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6122039411190202;StartedAtUtc;00:02:15.1319702;06:07:53.0317340;06:05:37.8997638;False;232;0;0;00:00:00;01:01:23.9791508;01:01:23.9791508;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.5193990;00:00:00;02:00:00;00:02:15.1319702;01:07:44.8803648;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:51.0808420 [PrintingService.cs@1918] -06/15/2026 22:19:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=44.33333333333333,printChamber1=44.33333333333333,printChamber2=44.33333333333333,printChamber3=44.33333333333333,printChamber4=44.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=39.33333333333333,powderChamber1=39.33333333333333,powderChamber2=39.33333333333333,powderChamber3=39.33333333333333,powderChamber4=39.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1771168. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:19:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:19:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:19:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=57.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 57.93844833374023. Used = 57.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 142.6199474, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.6461818091110205, Elapsed = 00:02:22.6319134, TimeTotal = 06:07:53.0313650, Remaining = 06:05:30.3994516, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.9791508, WeightTotalEstimate = 01:01:23.9791508, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.5193990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:22.6319134, HeatingEstimate = 01:07:37.3800526, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:51.0808420, WeightEstimate = 01:01:23.9791508 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6461818091110205;StartedAtUtc;00:02:22.6319134;06:07:53.0313650;06:05:30.3994516;False;232;0;0;00:00:00;01:01:23.9791508;01:01:23.9791508;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.5193990;00:00:00;02:00:00;00:02:22.6319134;01:07:37.3800526;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:51.0808420 [PrintingService.cs@1918] -06/15/2026 22:19:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=45.33333333333333,printChamber1=45.33333333333333,printChamber2=45.33333333333333,printChamber3=45.33333333333333,printChamber4=45.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:24 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=28.5 that are outside of set tolerance 10 for current step target 39.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:19:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.333332 with temperature 36 [HeaterCheck.cs@67] -06/15/2026 22:19:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=58.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 58.93844833374023. Used = 58.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 150.1267696, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.6801908860409799, Elapsed = 00:02:30.1387477, TimeTotal = 06:07:53.0313771, Remaining = 06:05:22.8926294, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.9791508, WeightTotalEstimate = 01:01:23.9791508, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.5193990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:30.1387477, HeatingEstimate = 01:07:29.8732304, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:51.0808420, WeightEstimate = 01:01:23.9791508 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6801908860409799;StartedAtUtc;00:02:30.1387477;06:07:53.0313771;06:05:22.8926294;False;232;0;0;00:00:00;01:01:23.9791508;01:01:23.9791508;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.5193990;00:00:00;02:00:00;00:02:30.1387477;01:07:29.8732304;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:51.0808420 [PrintingService.cs@1918] -06/15/2026 22:19:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=46.33333333333333,printChamber1=46.33333333333333,printChamber2=46.33333333333333,printChamber3=46.33333333333333,printChamber4=46.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=58.892147064208984, Elapsed=00:00:27.6040913 [ControlledHeating.cs@486] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 57.748661041259766 after 00:00:30.6063149 [ControlledHeating.cs@493] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2059819. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0613448. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2771452. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2896642. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:19:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 36241052574 (36241052574 @ 0) for mcu = 287.410700 [15/06/2026 21:07:54] (302.00877145 sec) to 38654780602 (from now=38534780602, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 36241052574 (36241052574 @ 0) for mcu = 287.410700 [15/06/2026 21:07:54] (302.00877145 sec) to 38654780602 (from external timestamp, flags=None, requested=38654780602 (38654780602 @ 0) for mcu = 307.525277 [15/06/2026 21:08:14] (322.12317168333334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 36241052574 (36241052574 @ 0) for mcu = 287.410700 [15/06/2026 21:07:54] (302.00877145 sec) to 38654780602 (from external timestamp, flags=None, requested=38654780602 (38654780602 @ 0) for mcu = 307.525277 [15/06/2026 21:08:14] (322.12317168333334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:19:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=59.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 59.93844833374023. Used = 59.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=350792, estimate=49.732304741962466 for layer 3, Z=0.301 [PrintingService.cs@1524] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 157.6264503, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.7141677978910483, Elapsed = 00:02:37.6384825, TimeTotal = 06:07:53.0314312, Remaining = 06:05:15.3929487, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:23.9791508, WeightTotalEstimate = 01:01:23.9791508, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:30.5193990, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:37.6384825, HeatingEstimate = 01:07:22.3735497, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:12:51.0808420, WeightEstimate = 01:01:23.9791508 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7141677978910483;StartedAtUtc;00:02:37.6384825;06:07:53.0314312;06:05:15.3929487;False;232;0;0;00:00:00;01:01:23.9791508;01:01:23.9791508;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:30.5193990;00:00:00;02:00:00;00:02:37.6384825;01:07:22.3735497;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:12:51.0808420 [PrintingService.cs@1918] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=47.33333333333333,printChamber1=47.33333333333333,printChamber2=47.33333333333333,printChamber3=47.33333333333333,printChamber4=47.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 3, island count 10 [PrintingService.cs@1569] -06/15/2026 22:19:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 4, start=0, count=232, Z=0.401 [PrintingService.cs@1518] -06/15/2026 22:19:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 201, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:19:44 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:19:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/15/2026 22:19:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:19:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 22:19:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/15/2026 22:19:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/15/2026 22:19:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0789259 ~ 5.94 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:19:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=60.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 60.93844833374023. Used = 60.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 165.1285616, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.7477382789024345, Elapsed = 00:02:45.1405379, TimeTotal = 06:08:05.3395579, Remaining = 06:05:20.1990200, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.2873334, WeightTotalEstimate = 01:01:36.2873334, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.8275816, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:45.1405379, HeatingEstimate = 01:07:14.8714384, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.3890246, WeightEstimate = 01:01:36.2873334 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7477382789024345;StartedAtUtc;00:02:45.1405379;06:08:05.3395579;06:05:20.1990200;False;232;0;0;00:00:00;01:01:36.2873334;01:01:36.2873334;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.8275816;00:00:00;02:00:00;00:02:45.1405379;01:07:14.8714384;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.3890246 [PrintingService.cs@1918] -06/15/2026 22:19:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=48.33333333333333,printChamber1=48.33333333333333,printChamber2=48.33333333333333,printChamber3=48.33333333333333,printChamber4=48.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9999150. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4043831. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:19:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:19:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:19:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=61.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:19:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 61.93844833374023. Used = 61.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:19:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 172.6272303, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.7816914348941841, Elapsed = 00:02:52.6392077, TimeTotal = 06:08:05.3395590, Remaining = 06:05:12.7003513, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.2873334, WeightTotalEstimate = 01:01:36.2873334, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.8275816, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:52.6392077, HeatingEstimate = 01:07:07.3727697, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.3890246, WeightEstimate = 01:01:36.2873334 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:19:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7816914348941841;StartedAtUtc;00:02:52.6392077;06:08:05.3395590;06:05:12.7003513;False;232;0;0;00:00:00;01:01:36.2873334;01:01:36.2873334;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.8275816;00:00:00;02:00:00;00:02:52.6392077;01:07:07.3727697;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.3890246 [PrintingService.cs@1918] -06/15/2026 22:19:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=49.33333333333333,printChamber1=49.33333333333333,printChamber2=49.33333333333333,printChamber3=49.33333333333333,printChamber4=49.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=40.33333333333333,powderChamber1=40.33333333333333,powderChamber2=40.33333333333333,powderChamber3=40.33333333333333,powderChamber4=40.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:19:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 49.333332 with temperature 50.25 [HeaterCheck.cs@67] -06/15/2026 22:20:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 40.333332 with temperature 27.75 [HeaterCheck.cs@111] -06/15/2026 22:20:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=62.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:20:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 62.93844833374023. Used = 62.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 180.1307354, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.8156678858111832, Elapsed = 00:03:00.1430248, TimeTotal = 06:08:05.3398710, Remaining = 06:05:05.1968462, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.2873334, WeightTotalEstimate = 01:01:36.2873334, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.8275816, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:00.1430248, HeatingEstimate = 01:06:59.8692646, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.3890246, WeightEstimate = 01:01:36.2873334 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8156678858111832;StartedAtUtc;00:03:00.1430248;06:08:05.3398710;06:05:05.1968462;False;232;0;0;00:00:00;01:01:36.2873334;01:01:36.2873334;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.8275816;00:00:00;02:00:00;00:03:00.1430248;01:06:59.8692646;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.3890246 [PrintingService.cs@1918] -06/15/2026 22:20:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=50.33333333333333,printChamber1=50.33333333333333,printChamber2=50.33333333333333,printChamber3=50.33333333333333,printChamber4=50.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=41.33333333333333,powderChamber1=41.33333333333333,powderChamber2=41.33333333333333,powderChamber3=41.33333333333333,powderChamber4=41.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=62.1133918762207, Elapsed=00:00:27.2256101 [ControlledHeating.cs@486] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 61.61883544921875 after 00:00:30.2253809 [ControlledHeating.cs@493] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3136044. SinceCollect=00:01:00.7393858. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1169, gen1=117, gen2=24, LatencyMode=Interactive, FreeMemory=5981831168, Live=441602824, HeapSizeBytes=446239320, FragmentedBytes=5148496, TotalCommittedBytes=455524352, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631403. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0725510. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0833946. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:20:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 39866301830 (39866301830 @ 0) for mcu = 317.620466 [15/06/2026 21:08:24] (332.2191819166667 sec) to 42318976700 (from now=42198976700, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 39866301830 (39866301830 @ 0) for mcu = 317.620466 [15/06/2026 21:08:24] (332.2191819166667 sec) to 42318976700 (from now=42198976700, flags=None, requested=42318976700 (42318976700 @ 0) for mcu = 338.059290 [15/06/2026 21:08:45] (352.6581391666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:20:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 39866301830 (39866301830 @ 0) for mcu = 317.620466 [15/06/2026 21:08:24] (332.2191819166667 sec) to 42318976700 (from now=42198976700, flags=None, requested=42318976700 (42318976700 @ 0) for mcu = 338.059290 [15/06/2026 21:08:45] (352.6581391666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:20:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=63.93844833374023 [ControlledHeating.cs@169] -06/15/2026 22:20:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 63.93844833374023. Used = 63.93844833374023 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 187.6343503, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.8496420387158501, Elapsed = 00:03:07.6463293, TimeTotal = 06:08:05.3395606, Remaining = 06:04:57.6932313, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.2873334, WeightTotalEstimate = 01:01:36.2873334, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:42.8275816, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:07.6463293, HeatingEstimate = 01:06:52.3656497, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:03.3890246, WeightEstimate = 01:01:36.2873334 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8496420387158501;StartedAtUtc;00:03:07.6463293;06:08:05.3395606;06:04:57.6932313;False;232;0;0;00:00:00;01:01:36.2873334;01:01:36.2873334;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:42.8275816;00:00:00;02:00:00;00:03:07.6463293;01:06:52.3656497;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:03.3890246 [PrintingService.cs@1918] -06/15/2026 22:20:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=51.33333333333333,printChamber1=51.33333333333333,printChamber2=51.33333333333333,printChamber3=51.33333333333333,printChamber4=51.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:10 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=27.75 that are outside of set tolerance 10 for current step target 41.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:20:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=42.33333333333333,powderChamber1=42.33333333333333,powderChamber2=42.33333333333333,powderChamber3=42.33333333333333,powderChamber4=42.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262502, estimate=49.889006274931916 for layer 4, Z=0.401 [PrintingService.cs@1524] -06/15/2026 22:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 4, island count 10 [PrintingService.cs@1569] -06/15/2026 22:20:14 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 5, start=0, count=232, Z=0.501 [PrintingService.cs@1518] -06/15/2026 22:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:20:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=64.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:20:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 64.93844833374024. Used = 64.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 195.1360824, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.8835807713191396, Elapsed = 00:03:15.1480606, TimeTotal = 06:08:06.0465658, Remaining = 06:04:50.8985052, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.9943394, WeightTotalEstimate = 01:01:36.9943394, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.5345876, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:15.1480606, HeatingEstimate = 01:06:44.8639176, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:04.0960306, WeightEstimate = 01:01:36.9943394 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8835807713191396;StartedAtUtc;00:03:15.1480606;06:08:06.0465658;06:04:50.8985052;False;232;0;0;00:00:00;01:01:36.9943394;01:01:36.9943394;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.5345876;00:00:00;02:00:00;00:03:15.1480606;01:06:44.8639176;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:04.0960306 [PrintingService.cs@1918] -06/15/2026 22:20:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=52.33333333333333,printChamber1=52.33333333333333,printChamber2=52.33333333333333,printChamber3=52.33333333333333,printChamber4=52.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9924807. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1897290. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:20:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:20:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:20:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=43.33333333333333,powderChamber1=43.33333333333333,powderChamber2=43.33333333333333,powderChamber3=43.33333333333333,powderChamber4=43.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=65.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:20:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 65.93844833374024. Used = 65.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 202.6379246, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.9175472114557631, Elapsed = 00:03:22.6499044, TimeTotal = 06:08:06.0465674, Remaining = 06:04:43.3966630, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.9943394, WeightTotalEstimate = 01:01:36.9943394, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.5345876, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:22.6499044, HeatingEstimate = 01:06:37.3620754, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:04.0960306, WeightEstimate = 01:01:36.9943394 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9175472114557631;StartedAtUtc;00:03:22.6499044;06:08:06.0465674;06:04:43.3966630;False;232;0;0;00:00:00;01:01:36.9943394;01:01:36.9943394;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.5345876;00:00:00;02:00:00;00:03:22.6499044;01:06:37.3620754;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:04.0960306 [PrintingService.cs@1918] -06/15/2026 22:20:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=53.33333333333333,printChamber1=53.33333333333333,printChamber2=53.33333333333333,printChamber3=53.33333333333333,printChamber4=53.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=28.25 that are outside of set tolerance 10 for current step target 43.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:20:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=66.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:20:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 66.93844833374024. Used = 66.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 210.1386149, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.9515083535595055, Elapsed = 00:03:30.1505779, TimeTotal = 06:08:06.0465506, Remaining = 06:04:35.8959727, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.9943394, WeightTotalEstimate = 01:01:36.9943394, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.5345876, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:30.1505779, HeatingEstimate = 01:06:29.8613851, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:04.0960306, WeightEstimate = 01:01:36.9943394 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9515083535595055;StartedAtUtc;00:03:30.1505779;06:08:06.0465506;06:04:35.8959727;False;232;0;0;00:00:00;01:01:36.9943394;01:01:36.9943394;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.5345876;00:00:00;02:00:00;00:03:30.1505779;01:06:29.8613851;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:04.0960306 [PrintingService.cs@1918] -06/15/2026 22:20:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=54.33333333333333,printChamber1=54.33333333333333,printChamber2=54.33333333333333,printChamber3=54.33333333333333,printChamber4=54.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=68.29823303222656, Elapsed=00:00:27.5201717 [ControlledHeating.cs@486] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 67.93782043457031 after 00:00:30.5250199 [ControlledHeating.cs@493] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2099955. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634295. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2763594. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2895811. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:20:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 43530497928 (43530497928 @ 0) for mcu = 348.155175 [15/06/2026 21:08:55] (362.7541494 sec) to 45943663970 (from now=45823663970, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 43530497928 (43530497928 @ 0) for mcu = 348.155175 [15/06/2026 21:08:55] (362.7541494 sec) to 45943663970 (from now=45823663970, flags=None, requested=45943663970 (45943663970 @ 0) for mcu = 368.264754 [15/06/2026 21:09:15] (382.86386641666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 43530497928 (43530497928 @ 0) for mcu = 348.155175 [15/06/2026 21:08:55] (362.7541494 sec) to 45943663970 (from now=45823663970, flags=None, requested=45943663970 (45943663970 @ 0) for mcu = 368.264754 [15/06/2026 21:09:15] (382.86386641666667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:20:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:20:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=67.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:20:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 67.93844833374024. Used = 67.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 217.6407835, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 0.9854767517135108, Elapsed = 00:03:37.6528552, TimeTotal = 06:08:06.0466593, Remaining = 06:04:28.3938041, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.9943394, WeightTotalEstimate = 01:01:36.9943394, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.5345876, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:37.6528552, HeatingEstimate = 01:06:22.3592165, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:04.0960306, WeightEstimate = 01:01:36.9943394 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9854767517135108;StartedAtUtc;00:03:37.6528552;06:08:06.0466593;06:04:28.3938041;False;232;0;0;00:00:00;01:01:36.9943394;01:01:36.9943394;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.5345876;00:00:00;02:00:00;00:03:37.6528552;01:06:22.3592165;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:04.0960306 [PrintingService.cs@1918] -06/15/2026 22:20:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=55.33333333333333,printChamber1=55.33333333333333,printChamber2=55.33333333333333,printChamber3=55.33333333333333,printChamber4=55.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.333332 with temperature 39.75 [HeaterCheck.cs@67] -06/15/2026 22:20:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0014213 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:20:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=68.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:20:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 68.93844833374024. Used = 68.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 225.1443743, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.0194506786824729, Elapsed = 00:03:45.1563516, TimeTotal = 06:08:06.0465649, Remaining = 06:04:20.8902133, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.9943394, WeightTotalEstimate = 01:01:36.9943394, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.5345876, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:45.1563516, HeatingEstimate = 01:06:14.8556257, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:04.0960306, WeightEstimate = 01:01:36.9943394 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0194506786824729;StartedAtUtc;00:03:45.1563516;06:08:06.0465649;06:04:20.8902133;False;232;0;0;00:00:00;01:01:36.9943394;01:01:36.9943394;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.5345876;00:00:00;02:00:00;00:03:45.1563516;01:06:14.8556257;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:04.0960306 [PrintingService.cs@1918] -06/15/2026 22:20:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=56.33333333333333,printChamber1=56.33333333333333,printChamber2=56.33333333333333,printChamber3=56.33333333333333,printChamber4=56.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:20:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9959003. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3981479. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:20:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:20:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:20:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=69.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:20:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 69.93844833374024. Used = 69.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:20:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 232.6489875, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.0534295939608957, Elapsed = 00:03:52.6609505, TimeTotal = 06:08:06.0465506, Remaining = 06:04:13.3856001, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.9943394, WeightTotalEstimate = 01:01:36.9943394, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.5345876, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:52.6609505, HeatingEstimate = 01:06:07.3510125, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:04.0960306, WeightEstimate = 01:01:36.9943394 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:20:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0534295939608957;StartedAtUtc;00:03:52.6609505;06:08:06.0465506;06:04:13.3856001;False;232;0;0;00:00:00;01:01:36.9943394;01:01:36.9943394;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.5345876;00:00:00;02:00:00;00:03:52.6609505;01:06:07.3510125;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:04.0960306 [PrintingService.cs@1918] -06/15/2026 22:20:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=57.33333333333333,printChamber1=57.33333333333333,printChamber2=57.33333333333333,printChamber3=57.33333333333333,printChamber4=57.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=70.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 70.93844833374024. Used = 70.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 240.1554114, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.087416852776003, Elapsed = 00:04:00.1673925, TimeTotal = 06:08:06.0465687, Remaining = 06:04:05.8791762, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:01:36.9943394, WeightTotalEstimate = 01:01:36.9943394, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:57:43.5345876, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:00.1673925, HeatingEstimate = 01:05:59.8445886, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:04.0960306, WeightEstimate = 01:01:36.9943394 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.087416852776003;StartedAtUtc;00:04:00.1673925;06:08:06.0465687;06:04:05.8791762;False;232;0;0;00:00:00;01:01:36.9943394;01:01:36.9943394;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:57:43.5345876;00:00:00;02:00:00;00:04:00.1673925;01:05:59.8445886;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:04.0960306 [PrintingService.cs@1918] -06/15/2026 22:21:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=58.33333333333333,printChamber1=58.33333333333333,printChamber2=58.33333333333333,printChamber3=58.33333333333333,printChamber4=58.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351514, estimate=49.28515873776685 for layer 5, Z=0.501 [PrintingService.cs@1524] -06/15/2026 22:21:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 5, island count 7 [PrintingService.cs@1569] -06/15/2026 22:21:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 6, start=0, count=232, Z=0.601 [PrintingService.cs@1518] -06/15/2026 22:21:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:21:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=72.53743743896484, Elapsed=00:00:27.2002502 [ControlledHeating.cs@486] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 72.35411071777344 after 00:00:30.1992211 [ControlledHeating.cs@493] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3930377. SinceCollect=00:01:00.8050251. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1284, gen1=126, gen2=25, LatencyMode=Interactive, FreeMemory=6007996416, Live=440875680, HeapSizeBytes=445952328, FragmentedBytes=5233688, TotalCommittedBytes=455557120, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633417. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0661579. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0781799. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:21:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 47155185198 (47155185198 @ 0) for mcu = 378.360881 [15/06/2026 21:09:25] (392.95987665 sec) to 49615065654 (from now=49495065654, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 47155185198 (47155185198 @ 0) for mcu = 378.360881 [15/06/2026 21:09:25] (392.95987665 sec) to 49615065654 (from now=49495065654, flags=None, requested=49615065654 (49615065654 @ 0) for mcu = 398.859818 [15/06/2026 21:09:45] (413.45888045 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 47155185198 (47155185198 @ 0) for mcu = 378.360881 [15/06/2026 21:09:25] (392.95987665 sec) to 49615065654 (from now=49495065654, flags=None, requested=49615065654 (49615065654 @ 0) for mcu = 398.859818 [15/06/2026 21:09:45] (413.45888045 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:21:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=71.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 71.93844833374024. Used = 71.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 247.660245, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.119935496134237, Elapsed = 00:04:07.6722072, TimeTotal = 06:08:34.8635841, Remaining = 06:04:27.1913769, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.8113737, WeightTotalEstimate = 01:02:05.8113737, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3516219, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:07.6722072, HeatingEstimate = 01:05:52.3397550, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9130649, WeightEstimate = 01:02:05.8113737 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.119935496134237;StartedAtUtc;00:04:07.6722072;06:08:34.8635841;06:04:27.1913769;False;232;0;0;00:00:00;01:02:05.8113737;01:02:05.8113737;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3516219;00:00:00;02:00:00;00:04:07.6722072;01:05:52.3397550;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9130649 [PrintingService.cs@1918] -06/15/2026 22:21:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=59.33333333333333,printChamber1=59.33333333333333,printChamber2=59.33333333333333,printChamber3=59.33333333333333,printChamber4=59.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 43.333332 with temperature 29.25 [HeaterCheck.cs@111] -06/15/2026 22:21:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=72.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 72.93844833374024. Used = 72.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 255.15955, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.1538462053151926, Elapsed = 00:04:15.1715143, TimeTotal = 06:08:34.8635862, Remaining = 06:04:19.6920719, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.8113737, WeightTotalEstimate = 01:02:05.8113737, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3516219, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:15.1715143, HeatingEstimate = 01:05:44.8404500, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9130649, WeightEstimate = 01:02:05.8113737 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1538462053151926;StartedAtUtc;00:04:15.1715143;06:08:34.8635862;06:04:19.6920719;False;232;0;0;00:00:00;01:02:05.8113737;01:02:05.8113737;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3516219;00:00:00;02:00:00;00:04:15.1715143;01:05:44.8404500;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9130649 [PrintingService.cs@1918] -06/15/2026 22:21:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=60.33333333333333,printChamber1=60.33333333333333,printChamber2=60.33333333333333,printChamber3=60.33333333333333,printChamber4=60.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9992382. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1900689. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:21:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:21:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:21:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=73.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 73.93844833374024. Used = 73.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 262.6582411, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.1877541148475281, Elapsed = 00:04:22.6702022, TimeTotal = 06:08:34.8635830, Remaining = 06:04:12.1933808, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.8113737, WeightTotalEstimate = 01:02:05.8113737, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3516219, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:22.6702022, HeatingEstimate = 01:05:37.3417589, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9130649, WeightEstimate = 01:02:05.8113737 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1877541148475281;StartedAtUtc;00:04:22.6702022;06:08:34.8635830;06:04:12.1933808;False;232;0;0;00:00:00;01:02:05.8113737;01:02:05.8113737;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3516219;00:00:00;02:00:00;00:04:22.6702022;01:05:37.3417589;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9130649 [PrintingService.cs@1918] -06/15/2026 22:21:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=61.33333333333333,printChamber1=61.33333333333333,printChamber2=61.33333333333333,printChamber3=61.33333333333333,printChamber4=61.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=74.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 74.93844833374024. Used = 74.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 270.1606106, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.2216834761181106, Elapsed = 00:04:30.1736473, TimeTotal = 06:08:34.8646586, Remaining = 06:04:04.6910113, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:05.8113737, WeightTotalEstimate = 01:02:05.8113737, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:12.3516219, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:30.1736473, HeatingEstimate = 01:05:29.8393894, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:13:32.9130649, WeightEstimate = 01:02:05.8113737 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2216834761181106;StartedAtUtc;00:04:30.1736473;06:08:34.8646586;06:04:04.6910113;False;232;0;0;00:00:00;01:02:05.8113737;01:02:05.8113737;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:12.3516219;00:00:00;02:00:00;00:04:30.1736473;01:05:29.8393894;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:13:32.9130649 [PrintingService.cs@1918] -06/15/2026 22:21:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=62.33333333333333,printChamber1=62.33333333333333,printChamber2=62.33333333333333,printChamber3=62.33333333333333,printChamber4=62.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=75.8722915649414, Elapsed=00:00:27.5962110 [ControlledHeating.cs@486] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 75.47557067871094 after 00:00:30.5970364 [ControlledHeating.cs@493] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2008346. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0598275. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2682081. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2810029. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:21:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 50826586882 (50826586882 @ 0) for mcu = 408.956097 [15/06/2026 21:09:56] (423.5548906833333 sec) to 53239265129 (from now=53119265129, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 50826586882 (50826586882 @ 0) for mcu = 408.956097 [15/06/2026 21:09:56] (423.5548906833333 sec) to 53239265129 (from external timestamp, flags=None, requested=53239265129 (53239265129 @ 0) for mcu = 429.061793 [15/06/2026 21:10:16] (443.6605427416667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:21:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 50826586882 (50826586882 @ 0) for mcu = 408.956097 [15/06/2026 21:09:56] (423.5548906833333 sec) to 53239265129 (from external timestamp, flags=None, requested=53239265129 (53239265129 @ 0) for mcu = 429.061793 [15/06/2026 21:10:16] (443.6605427416667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:21:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:21:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262862, estimate=49.23875767348001 for layer 6, Z=0.601 [PrintingService.cs@1524] -06/15/2026 22:21:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 6, island count 7 [PrintingService.cs@1569] -06/15/2026 22:21:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 7, start=0, count=232, Z=0.701 [PrintingService.cs@1518] -06/15/2026 22:21:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:21:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=75.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 75.93844833374024. Used = 75.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 277.6620082, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.253977514463099, Elapsed = 00:04:37.6739895, TimeTotal = 06:09:03.4584191, Remaining = 06:04:25.7844296, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.4061896, WeightTotalEstimate = 01:02:34.4061896, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:40.9464378, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:37.6739895, HeatingEstimate = 01:05:22.3379918, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.5078808, WeightEstimate = 01:02:34.4061896 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.253977514463099;StartedAtUtc;00:04:37.6739895;06:09:03.4584191;06:04:25.7844296;False;232;0;0;00:00:00;01:02:34.4061896;01:02:34.4061896;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:40.9464378;00:00:00;02:00:00;00:04:37.6739895;01:05:22.3379918;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.5078808 [PrintingService.cs@1918] -06/15/2026 22:21:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=63.33333333333333,printChamber1=63.33333333333333,printChamber2=63.33333333333333,printChamber3=63.33333333333333,printChamber4=63.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 356 samples in 00:01:00.0228546 ~ 5.93 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:21:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=76.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 76.93844833374024. Used = 76.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 285.1632084, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.2878533731021007, Elapsed = 00:04:45.1752773, TimeTotal = 06:09:03.4585067, Remaining = 06:04:18.2832294, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.4061896, WeightTotalEstimate = 01:02:34.4061896, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:40.9464378, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:45.1752773, HeatingEstimate = 01:05:14.8367916, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.5078808, WeightEstimate = 01:02:34.4061896 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2878533731021007;StartedAtUtc;00:04:45.1752773;06:09:03.4585067;06:04:18.2832294;False;232;0;0;00:00:00;01:02:34.4061896;01:02:34.4061896;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:40.9464378;00:00:00;02:00:00;00:04:45.1752773;01:05:14.8367916;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.5078808 [PrintingService.cs@1918] -06/15/2026 22:21:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=64.33333333333333,printChamber1=64.33333333333333,printChamber2=64.33333333333333,printChamber3=64.33333333333333,printChamber4=64.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9999495. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3898539. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:21:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:21:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:21:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=77.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:21:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 77.93844833374024. Used = 77.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:21:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 292.6624601, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.321719604942155, Elapsed = 00:04:52.6744310, TimeTotal = 06:09:03.4584087, Remaining = 06:04:10.7839777, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.4061896, WeightTotalEstimate = 01:02:34.4061896, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:40.9464378, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:52.6744310, HeatingEstimate = 01:05:07.3375399, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.5078808, WeightEstimate = 01:02:34.4061896 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:21:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.321719604942155;StartedAtUtc;00:04:52.6744310;06:09:03.4584087;06:04:10.7839777;False;232;0;0;00:00:00;01:02:34.4061896;01:02:34.4061896;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:40.9464378;00:00:00;02:00:00;00:04:52.6744310;01:05:07.3375399;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.5078808 [PrintingService.cs@1918] -06/15/2026 22:21:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=65.33333333333333,printChamber1=65.33333333333333,printChamber2=65.33333333333333,printChamber3=65.33333333333333,printChamber4=65.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:21:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=44.33333333333333,powderChamber1=44.33333333333333,powderChamber2=44.33333333333333,powderChamber3=44.33333333333333,powderChamber4=44.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=78.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 78.93844833374024. Used = 78.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 300.1678313, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.3556142194055563, Elapsed = 00:05:00.1798718, TimeTotal = 06:09:03.4584783, Remaining = 06:04:03.2786065, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.4061896, WeightTotalEstimate = 01:02:34.4061896, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:40.9464378, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:00.1798718, HeatingEstimate = 01:04:59.8321687, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.5078808, WeightEstimate = 01:02:34.4061896 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3556142194055563;StartedAtUtc;00:05:00.1798718;06:09:03.4584783;06:04:03.2786065;False;232;0;0;00:00:00;01:02:34.4061896;01:02:34.4061896;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:40.9464378;00:00:00;02:00:00;00:05:00.1798718;01:04:59.8321687;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.5078808 [PrintingService.cs@1918] -06/15/2026 22:22:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=66.33333333333333,printChamber1=66.33333333333333,printChamber2=66.33333333333333,printChamber3=66.33333333333333,printChamber4=66.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=77.72882843017578, Elapsed=00:00:27.2026826 [ControlledHeating.cs@486] -06/15/2026 22:22:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=45.33333333333333,powderChamber1=45.33333333333333,powderChamber2=45.33333333333333,powderChamber3=45.33333333333333,powderChamber4=45.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 66.333336 with temperature 63.5 [HeaterCheck.cs@67] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 77.40721893310547 after 00:00:30.2090426 [ControlledHeating.cs@493] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2808695. SinceCollect=00:01:00.6942658. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1396, gen1=135, gen2=26, LatencyMode=Interactive, FreeMemory=6001901568, Live=440972136, HeapSizeBytes=446013344, FragmentedBytes=5149368, TotalCommittedBytes=455557120, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632971. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0682465. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0832289. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:22:08 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 54450786357 (54450786357 @ 0) for mcu = 439.158155 [15/06/2026 21:10:26] (453.756552975 sec) to 56898742317 (from now=56778742317, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 54450786357 (54450786357 @ 0) for mcu = 439.158155 [15/06/2026 21:10:26] (453.756552975 sec) to 56898742317 (from external timestamp, flags=None, requested=56898742317 (56898742317 @ 0) for mcu = 459.557953 [15/06/2026 21:10:46] (474.156185975 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 54450786357 (54450786357 @ 0) for mcu = 439.158155 [15/06/2026 21:10:26] (453.756552975 sec) to 56898742317 (from external timestamp, flags=None, requested=56898742317 (56898742317 @ 0) for mcu = 459.557953 [15/06/2026 21:10:46] (474.156185975 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:22:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=79.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 79.93844833374024. Used = 79.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 307.6663262, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.3894771184871753, Elapsed = 00:05:07.6782877, TimeTotal = 06:09:03.4583993, Remaining = 06:03:55.7801116, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.4061896, WeightTotalEstimate = 01:02:34.4061896, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:40.9464378, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:07.6782877, HeatingEstimate = 01:04:52.3336738, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.5078808, WeightEstimate = 01:02:34.4061896 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3894771184871753;StartedAtUtc;00:05:07.6782877;06:09:03.4583993;06:03:55.7801116;False;232;0;0;00:00:00;01:02:34.4061896;01:02:34.4061896;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:40.9464378;00:00:00;02:00:00;00:05:07.6782877;01:04:52.3336738;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.5078808 [PrintingService.cs@1918] -06/15/2026 22:22:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=67.33333333333333,printChamber1=67.33333333333333,printChamber2=67.33333333333333,printChamber3=67.33333333333333,printChamber4=67.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:12 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=31 that are outside of set tolerance 10 for current step target 45.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:22:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=80.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 80.93844833374024. Used = 80.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 315.1690576, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.4233609149815216, Elapsed = 00:05:15.1813366, TimeTotal = 06:09:03.4587168, Remaining = 06:03:48.2773802, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:34.4061896, WeightTotalEstimate = 01:02:34.4061896, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:40.9464378, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:15.1813366, HeatingEstimate = 01:04:44.8309424, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:01.5078808, WeightEstimate = 01:02:34.4061896 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4233609149815216;StartedAtUtc;00:05:15.1813366;06:09:03.4587168;06:03:48.2773802;False;232;0;0;00:00:00;01:02:34.4061896;01:02:34.4061896;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:40.9464378;00:00:00;02:00:00;00:05:15.1813366;01:04:44.8309424;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:01.5078808 [PrintingService.cs@1918] -06/15/2026 22:22:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=68.33333333333333,printChamber1=68.33333333333333,printChamber2=68.33333333333333,printChamber3=68.33333333333333,printChamber4=68.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0102405. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1913745. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:22:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:22:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:22:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351467, estimate=49.25418750491087 for layer 7, Z=0.701 [PrintingService.cs@1524] -06/15/2026 22:22:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 7, island count 7 [PrintingService.cs@1569] -06/15/2026 22:22:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 8, start=0, count=232, Z=0.801 [PrintingService.cs@1518] -06/15/2026 22:22:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:22:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=81.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 81.93844833374024. Used = 81.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 322.6699503, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.4571387636490742, Elapsed = 00:05:22.6819153, TimeTotal = 06:09:04.8995353, Remaining = 06:03:42.2176200, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:35.8473221, WeightTotalEstimate = 01:02:35.8473221, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.3875703, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:22.6819153, HeatingEstimate = 01:04:37.3300497, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:02.9490133, WeightEstimate = 01:02:35.8473221 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4571387636490742;StartedAtUtc;00:05:22.6819153;06:09:04.8995353;06:03:42.2176200;False;232;0;0;00:00:00;01:02:35.8473221;01:02:35.8473221;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.3875703;00:00:00;02:00:00;00:05:22.6819153;01:04:37.3300497;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:02.9490133 [PrintingService.cs@1918] -06/15/2026 22:22:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=69.33333333333333,printChamber1=69.33333333333333,printChamber2=69.33333333333333,printChamber3=69.33333333333333,printChamber4=69.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=82.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 82.93844833374024. Used = 82.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 330.1740028, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.491025007978458, Elapsed = 00:05:30.1859904, TimeTotal = 06:09:04.8995579, Remaining = 06:03:34.7135675, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:35.8473221, WeightTotalEstimate = 01:02:35.8473221, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.3875703, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:30.1859904, HeatingEstimate = 01:04:29.8259972, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:02.9490133, WeightEstimate = 01:02:35.8473221 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.491025007978458;StartedAtUtc;00:05:30.1859904;06:09:04.8995579;06:03:34.7135675;False;232;0;0;00:00:00;01:02:35.8473221;01:02:35.8473221;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.3875703;00:00:00;02:00:00;00:05:30.1859904;01:04:29.8259972;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:02.9490133 [PrintingService.cs@1918] -06/15/2026 22:22:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=70.33333333333333,printChamber1=70.33333333333333,printChamber2=70.33333333333333,printChamber3=70.33333333333333,printChamber4=70.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=83.8316650390625, Elapsed=00:00:27.4853264 [ControlledHeating.cs@486] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 83.36437225341797 after 00:00:30.4925753 [ControlledHeating.cs@493] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2167073. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630991. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2797296. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2915400. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:22:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 58110263545 (58110263545 @ 0) for mcu = 469.654309 [15/06/2026 21:10:56] (484.2521962083333 sec) to 60523778475 (from now=60403778475, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 58110263545 (58110263545 @ 0) for mcu = 469.654309 [15/06/2026 21:10:56] (484.2521962083333 sec) to 60523778475 (from external timestamp, flags=None, requested=60523778475 (60523778475 @ 0) for mcu = 489.767189 [15/06/2026 21:11:16] (504.364820625 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 58110263545 (58110263545 @ 0) for mcu = 469.654309 [15/06/2026 21:10:56] (484.2521962083333 sec) to 60523778475 (from external timestamp, flags=None, requested=60523778475 (60523778475 @ 0) for mcu = 489.767189 [15/06/2026 21:11:16] (504.364820625 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:22:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:22:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=83.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 83.93844833374024. Used = 83.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 337.6765041, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.5249075848279103, Elapsed = 00:05:37.6892648, TimeTotal = 06:09:04.9003310, Remaining = 06:03:27.2110662, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:35.8473221, WeightTotalEstimate = 01:02:35.8473221, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.3875703, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:37.6892648, HeatingEstimate = 01:04:22.3234959, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:02.9490133, WeightEstimate = 01:02:35.8473221 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5249075848279103;StartedAtUtc;00:05:37.6892648;06:09:04.9003310;06:03:27.2110662;False;232;0;0;00:00:00;01:02:35.8473221;01:02:35.8473221;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.3875703;00:00:00;02:00:00;00:05:37.6892648;01:04:22.3234959;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:02.9490133 [PrintingService.cs@1918] -06/15/2026 22:22:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=71.33333333333333,printChamber1=71.33333333333333,printChamber2=71.33333333333333,printChamber3=71.33333333333333,printChamber4=71.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0995409 ~ 6.01 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:22:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=84.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 84.93844833374024. Used = 84.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 345.1796299, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.5587860051083426, Elapsed = 00:05:45.1915948, TimeTotal = 06:09:04.8995352, Remaining = 06:03:19.7079404, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:02:35.8473221, WeightTotalEstimate = 01:02:35.8473221, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:58:42.3875703, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:45.1915948, HeatingEstimate = 01:04:14.8203701, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:02.9490133, WeightEstimate = 01:02:35.8473221 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5587860051083426;StartedAtUtc;00:05:45.1915948;06:09:04.8995352;06:03:19.7079404;False;232;0;0;00:00:00;01:02:35.8473221;01:02:35.8473221;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:58:42.3875703;00:00:00;02:00:00;00:05:45.1915948;01:04:14.8203701;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:02.9490133 [PrintingService.cs@1918] -06/15/2026 22:22:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=72.33333333333333,printChamber1=72.33333333333333,printChamber2=72.33333333333333,printChamber3=72.33333333333333,printChamber4=72.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9785049. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4008688. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:22:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:22:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:22:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262880, estimate=49.27183490464941 for layer 8, Z=0.801 [PrintingService.cs@1524] -06/15/2026 22:22:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 8, island count 7 [PrintingService.cs@1569] -06/15/2026 22:22:53 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 9, start=0, count=232, Z=0.901 [PrintingService.cs@1518] -06/15/2026 22:22:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:22:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=85.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:22:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 85.93844833374024. Used = 85.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 352.6807285, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.5902170348649465, Elapsed = 00:05:52.6926929, TimeTotal = 06:09:38.9029527, Remaining = 06:03:46.2102598, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.8507401, WeightTotalEstimate = 01:03:09.8507401, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.3909883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:52.6926929, HeatingEstimate = 01:04:07.3192715, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:36.9524313, WeightEstimate = 01:03:09.8507401 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:40. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5902170348649465;StartedAtUtc;00:05:52.6926929;06:09:38.9029527;06:03:46.2102598;False;232;0;0;00:00:00;01:03:09.8507401;01:03:09.8507401;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.3909883;00:00:00;02:00:00;00:05:52.6926929;01:04:07.3192715;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:36.9524313 [PrintingService.cs@1918] -06/15/2026 22:22:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=73.33333333333333,printChamber1=73.33333333333333,printChamber2=73.33333333333333,printChamber3=73.33333333333333,printChamber4=73.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:22:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 45.333332 with temperature 31.75 [HeaterCheck.cs@111] -06/15/2026 22:23:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=86.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 86.93844833374024. Used = 86.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 360.1823883, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.6240409979638382, Elapsed = 00:06:00.1944789, TimeTotal = 06:09:38.9030789, Remaining = 06:03:38.7086000, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.8507401, WeightTotalEstimate = 01:03:09.8507401, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.3909883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:00.1944789, HeatingEstimate = 01:03:59.8176117, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:36.9524313, WeightEstimate = 01:03:09.8507401 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:40. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6240409979638382;StartedAtUtc;00:06:00.1944789;06:09:38.9030789;06:03:38.7086000;False;232;0;0;00:00:00;01:03:09.8507401;01:03:09.8507401;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.3909883;00:00:00;02:00:00;00:06:00.1944789;01:03:59.8176117;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:36.9524313 [PrintingService.cs@1918] -06/15/2026 22:23:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=74.33333333333333,printChamber1=74.33333333333333,printChamber2=74.33333333333333,printChamber3=74.33333333333333,printChamber4=74.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=88.83575439453125, Elapsed=00:00:27.2064672 [ControlledHeating.cs@486] -06/15/2026 22:23:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 86.82088470458984 after 00:00:30.2044676 [ControlledHeating.cs@493] -06/15/2026 22:23:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2888853. SinceCollect=00:01:00.7047048. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1512, gen1=148, gen2=27, LatencyMode=Interactive, FreeMemory=5982814208, Live=441204016, HeapSizeBytes=445908296, FragmentedBytes=5109424, TotalCommittedBytes=455557120, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631317. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0680938. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=87.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0793822. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:23:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 61735299703 (61735299703 @ 0) for mcu = 499.863444 [15/06/2026 21:11:26] (514.4608308583333 sec) to 64182795474 (from now=64062795474, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 61735299703 (61735299703 @ 0) for mcu = 499.863444 [15/06/2026 21:11:26] (514.4608308583333 sec) to 64182795474 (from external timestamp, flags=None, requested=64182795474 (64182795474 @ 0) for mcu = 520.259548 [15/06/2026 21:11:47] (534.85662895 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 61735299703 (61735299703 @ 0) for mcu = 499.863444 [15/06/2026 21:11:26] (514.4608308583333 sec) to 64182795474 (from external timestamp, flags=None, requested=64182795474 (64182795474 @ 0) for mcu = 520.259548 [15/06/2026 21:11:47] (534.85662895 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 87.93844833374024. Used = 87.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 367.6859016, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.657872459288652, Elapsed = 00:06:07.6979248, TimeTotal = 06:09:38.9030115, Remaining = 06:03:31.2050867, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.8507401, WeightTotalEstimate = 01:03:09.8507401, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.3909883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:07.6979248, HeatingEstimate = 01:03:52.3140984, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:36.9524313, WeightEstimate = 01:03:09.8507401 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:40. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.657872459288652;StartedAtUtc;00:06:07.6979248;06:09:38.9030115;06:03:31.2050867;False;232;0;0;00:00:00;01:03:09.8507401;01:03:09.8507401;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.3909883;00:00:00;02:00:00;00:06:07.6979248;01:03:52.3140984;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:36.9524313 [PrintingService.cs@1918] -06/15/2026 22:23:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=75.33333333333333,printChamber1=75.33333333333333,printChamber2=75.33333333333333,printChamber3=75.33333333333333,printChamber4=75.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=88.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 88.93844833374024. Used = 88.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 375.2028679, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.691764646265295, Elapsed = 00:06:15.2148392, TimeTotal = 06:09:38.9029596, Remaining = 06:03:23.6881204, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.8507401, WeightTotalEstimate = 01:03:09.8507401, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.3909883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:15.2148392, HeatingEstimate = 01:03:44.7971321, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:36.9524313, WeightEstimate = 01:03:09.8507401 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:40. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.691764646265295;StartedAtUtc;00:06:15.2148392;06:09:38.9029596;06:03:23.6881204;False;232;0;0;00:00:00;01:03:09.8507401;01:03:09.8507401;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.3909883;00:00:00;02:00:00;00:06:15.2148392;01:03:44.7971321;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:36.9524313 [PrintingService.cs@1918] -06/15/2026 22:23:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=76.33333333333333,printChamber1=76.33333333333333,printChamber2=76.33333333333333,printChamber3=76.33333333333333,printChamber4=76.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 76.333336 with temperature 72.5 [HeaterCheck.cs@67] -06/15/2026 22:23:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9993935. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1895609. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:23:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:23:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:23:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=89.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 89.93844833374024. Used = 89.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 382.7100015, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.7256126792829534, Elapsed = 00:06:22.7219614, TimeTotal = 06:09:38.9029482, Remaining = 06:03:16.1809868, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.8507401, WeightTotalEstimate = 01:03:09.8507401, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.3909883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:22.7219614, HeatingEstimate = 01:03:37.2899985, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:36.9524313, WeightEstimate = 01:03:09.8507401 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:40. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7256126792829534;StartedAtUtc;00:06:22.7219614;06:09:38.9029482;06:03:16.1809868;False;232;0;0;00:00:00;01:03:09.8507401;01:03:09.8507401;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.3909883;00:00:00;02:00:00;00:06:22.7219614;01:03:37.2899985;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:36.9524313 [PrintingService.cs@1918] -06/15/2026 22:23:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=77.33333333333333,printChamber1=77.33333333333333,printChamber2=77.33333333333333,printChamber3=77.33333333333333,printChamber4=77.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=90.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 90.93844833374024. Used = 90.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 390.2101044, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.7594290876913807, Elapsed = 00:06:30.2220699, TimeTotal = 06:09:38.9029538, Remaining = 06:03:08.6808839, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.8507401, WeightTotalEstimate = 01:03:09.8507401, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.3909883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:30.2220699, HeatingEstimate = 01:03:29.7898956, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:36.9524313, WeightEstimate = 01:03:09.8507401 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:40. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7594290876913807;StartedAtUtc;00:06:30.2220699;06:09:38.9029538;06:03:08.6808839;False;232;0;0;00:00:00;01:03:09.8507401;01:03:09.8507401;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.3909883;00:00:00;02:00:00;00:06:30.2220699;01:03:29.7898956;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:36.9524313 [PrintingService.cs@1918] -06/15/2026 22:23:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=78.33333333333333,printChamber1=78.33333333333333,printChamber2=78.33333333333333,printChamber3=78.33333333333333,printChamber4=78.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=92.46684265136719, Elapsed=00:00:27.5049224 [ControlledHeating.cs@486] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=91.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 91.93844833374024. Used = 91.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 92.73967742919922 after 00:00:30.5042810 [ControlledHeating.cs@493] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 397.7106928, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.7932477895992067, Elapsed = 00:06:37.7226875, TimeTotal = 06:09:38.9029830, Remaining = 06:03:01.1802955, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:09.8507401, WeightTotalEstimate = 01:03:09.8507401, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:16.3909883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:37.7226875, HeatingEstimate = 01:03:22.2893072, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:36.9524313, WeightEstimate = 01:03:09.8507401 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:40. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7932477895992067;StartedAtUtc;00:06:37.7226875;06:09:38.9029830;06:03:01.1802955;False;232;0;0;00:00:00;01:03:09.8507401;01:03:09.8507401;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:16.3909883;00:00:00;02:00:00;00:06:37.7226875;01:03:22.2893072;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:36.9524313 [PrintingService.cs@1918] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=79.33333333333333,printChamber1=79.33333333333333,printChamber2=79.33333333333333,printChamber3=79.33333333333333,printChamber4=79.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2141325. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632194. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2771803. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2903722. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:23:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 65394316702 (65394316702 @ 0) for mcu = 530.355850 [15/06/2026 21:11:57] (544.9526391833333 sec) to 67807989200 (from now=67687989200, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 65394316702 (65394316702 @ 0) for mcu = 530.355850 [15/06/2026 21:11:57] (544.9526391833333 sec) to 67807989200 (from external timestamp, flags=None, requested=67807989200 (67807989200 @ 0) for mcu = 550.470137 [15/06/2026 21:12:17] (565.0665766666667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 65394316702 (65394316702 @ 0) for mcu = 530.355850 [15/06/2026 21:11:57] (544.9526391833333 sec) to 67807989200 (from external timestamp, flags=None, requested=67807989200 (67807989200 @ 0) for mcu = 550.470137 [15/06/2026 21:12:17] (565.0665766666667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:23:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:23:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351500, estimate=49.30576737952977 for layer 9, Z=0.901 [PrintingService.cs@1524] -06/15/2026 22:23:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 9, island count 7 [PrintingService.cs@1569] -06/15/2026 22:23:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 10, start=0, count=232, Z=1.001 [PrintingService.cs@1518] -06/15/2026 22:23:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:23:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0460565 ~ 6.01 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:23:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=92.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 92.93844833374024. Used = 92.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 405.2131993, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.8269518947817285, Elapsed = 00:06:45.2252458, TimeTotal = 06:09:40.4004231, Remaining = 06:02:55.1751773, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3481284, WeightTotalEstimate = 01:03:11.3481284, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8883766, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:45.2252458, HeatingEstimate = 01:03:14.7868007, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4498196, WeightEstimate = 01:03:11.3481284 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8269518947817285;StartedAtUtc;00:06:45.2252458;06:09:40.4004231;06:02:55.1751773;False;232;0;0;00:00:00;01:03:11.3481284;01:03:11.3481284;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8883766;00:00:00;02:00:00;00:06:45.2252458;01:03:14.7868007;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4498196 [PrintingService.cs@1918] -06/15/2026 22:23:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=80.33333333333333,printChamber1=80.33333333333333,printChamber2=80.33333333333333,printChamber3=80.33333333333333,printChamber4=80.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9855132. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3995171. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:23:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:23:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:23:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=93.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:23:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 93.93844833374024. Used = 93.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:23:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 412.716463, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.8607807886415866, Elapsed = 00:06:52.7286322, TimeTotal = 06:09:40.4005458, Remaining = 06:02:47.6719136, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3481284, WeightTotalEstimate = 01:03:11.3481284, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8883766, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:52.7286322, HeatingEstimate = 01:03:07.2835370, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4498196, WeightEstimate = 01:03:11.3481284 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:23:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8607807886415866;StartedAtUtc;00:06:52.7286322;06:09:40.4005458;06:02:47.6719136;False;232;0;0;00:00:00;01:03:11.3481284;01:03:11.3481284;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8883766;00:00:00;02:00:00;00:06:52.7286322;01:03:07.2835370;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4498196 [PrintingService.cs@1918] -06/15/2026 22:23:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=81.33333333333333,printChamber1=81.33333333333333,printChamber2=81.33333333333333,printChamber3=81.33333333333333,printChamber4=81.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:23:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 45.333332 with temperature 33.5 [HeaterCheck.cs@111] -06/15/2026 22:24:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=94.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 94.93844833374024. Used = 94.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 420.2211788, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.8946148440359003, Elapsed = 00:07:00.2331576, TimeTotal = 06:09:40.4003554, Remaining = 06:02:40.1671978, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3481284, WeightTotalEstimate = 01:03:11.3481284, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8883766, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:00.2331576, HeatingEstimate = 01:02:59.7788212, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4498196, WeightEstimate = 01:03:11.3481284 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8946148440359003;StartedAtUtc;00:07:00.2331576;06:09:40.4003554;06:02:40.1671978;False;232;0;0;00:00:00;01:03:11.3481284;01:03:11.3481284;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8883766;00:00:00;02:00:00;00:07:00.2331576;01:02:59.7788212;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4498196 [PrintingService.cs@1918] -06/15/2026 22:24:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=82.33333333333333,printChamber1=82.33333333333333,printChamber2=82.33333333333333,printChamber3=82.33333333333333,printChamber4=82.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=95.23326110839844, Elapsed=00:00:27.2068270 [ControlledHeating.cs@486] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=95.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 95.93844833374024. Used = 95.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 427.7183512, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.9284170488607433, Elapsed = 00:07:07.7306277, TimeTotal = 06:09:40.4006531, Remaining = 06:02:32.6700254, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3481284, WeightTotalEstimate = 01:03:11.3481284, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8883766, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:07.7306277, HeatingEstimate = 01:02:52.2816488, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4498196, WeightEstimate = 01:03:11.3481284 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9284170488607433;StartedAtUtc;00:07:07.7306277;06:09:40.4006531;06:02:32.6700254;False;232;0;0;00:00:00;01:03:11.3481284;01:03:11.3481284;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8883766;00:00:00;02:00:00;00:07:07.7306277;01:02:52.2816488;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4498196 [PrintingService.cs@1918] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=83.33333333333333,printChamber1=83.33333333333333,printChamber2=83.33333333333333,printChamber3=83.33333333333333,printChamber4=83.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 95.37039184570312 after 00:00:30.2098722 [ControlledHeating.cs@493] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3672299. SinceCollect=00:01:00.7918112. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1628, gen1=160, gen2=28, LatencyMode=Interactive, FreeMemory=5990760448, Live=441225520, HeapSizeBytes=445750280, FragmentedBytes=5018520, TotalCommittedBytes=455557120, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0605961. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0662402. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0782499. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:24:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 69019510428 (69019510428 @ 0) for mcu = 560.566345 [15/06/2026 21:12:27] (575.1625869 sec) to 71477480145 (from now=71357480145, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 69019510428 (69019510428 @ 0) for mcu = 560.566345 [15/06/2026 21:12:27] (575.1625869 sec) to 71477480145 (from external timestamp, flags=None, requested=71477480145 (71477480145 @ 0) for mcu = 581.049790 [15/06/2026 21:12:48] (595.645667875 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 69019510428 (69019510428 @ 0) for mcu = 560.566345 [15/06/2026 21:12:27] (575.1625869 sec) to 71477480145 (from external timestamp, flags=None, requested=71477480145 (71477480145 @ 0) for mcu = 581.049790 [15/06/2026 21:12:48] (595.645667875 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:24:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=96.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 96.93844833374024. Used = 96.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 435.2187705, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.9622312066585725, Elapsed = 00:07:15.2307373, TimeTotal = 06:09:40.4003434, Remaining = 06:02:25.1696061, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:11.3481284, WeightTotalEstimate = 01:03:11.3481284, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:17.8883766, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:15.2307373, HeatingEstimate = 01:02:44.7812295, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:14:38.4498196, WeightEstimate = 01:03:11.3481284 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:26:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9622312066585725;StartedAtUtc;00:07:15.2307373;06:09:40.4003434;06:02:25.1696061;False;232;0;0;00:00:00;01:03:11.3481284;01:03:11.3481284;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:17.8883766;00:00:00;02:00:00;00:07:15.2307373;01:02:44.7812295;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:14:38.4498196 [PrintingService.cs@1918] -06/15/2026 22:24:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=84.33333333333333,printChamber1=84.33333333333333,printChamber2=84.33333333333333,printChamber3=84.33333333333333,printChamber4=84.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=46.33333333333333,powderChamber1=46.33333333333333,powderChamber2=46.33333333333333,powderChamber3=46.33333333333333,powderChamber4=46.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262871, estimate=49.653858235835955 for layer 10, Z=1.001 [PrintingService.cs@1524] -06/15/2026 22:24:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 10, island count 7 [PrintingService.cs@1569] -06/15/2026 22:24:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 11, start=0, count=232, Z=1.1010001 [PrintingService.cs@1518] -06/15/2026 22:24:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:24:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9818443. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1919897. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:24:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:24:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:24:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=97.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 97.93844833374024. Used = 97.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 442.7186979, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 1.9934812427632196, Elapsed = 00:07:22.7308331, TimeTotal = 06:10:08.9289632, Remaining = 06:02:46.1981301, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8765798, WeightTotalEstimate = 01:03:39.8765798, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4168280, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:22.7308331, HeatingEstimate = 01:02:37.2813021, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:06.9782710, WeightEstimate = 01:03:39.8765798 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9934812427632196;StartedAtUtc;00:07:22.7308331;06:10:08.9289632;06:02:46.1981301;False;232;0;0;00:00:00;01:03:39.8765798;01:03:39.8765798;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4168280;00:00:00;02:00:00;00:07:22.7308331;01:02:37.2813021;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:06.9782710 [PrintingService.cs@1918] -06/15/2026 22:24:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=85.33333333333333,printChamber1=85.33333333333333,printChamber2=85.33333333333333,printChamber3=85.33333333333333,printChamber4=85.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:24 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=35.75 that are outside of set tolerance 10 for current step target 46.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:24:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=98.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 98.93844833374024. Used = 98.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 450.218733, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.027250986196006, Elapsed = 00:07:30.2307286, TimeTotal = 06:10:08.9288236, Remaining = 06:02:38.6980950, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8765798, WeightTotalEstimate = 01:03:39.8765798, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4168280, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:30.2307286, HeatingEstimate = 01:02:29.7812670, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:06.9782710, WeightEstimate = 01:03:39.8765798 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.027250986196006;StartedAtUtc;00:07:30.2307286;06:10:08.9288236;06:02:38.6980950;False;232;0;0;00:00:00;01:03:39.8765798;01:03:39.8765798;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4168280;00:00:00;02:00:00;00:07:30.2307286;01:02:29.7812670;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:06.9782710 [PrintingService.cs@1918] -06/15/2026 22:24:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=86.33333333333333,printChamber1=86.33333333333333,printChamber2=86.33333333333333,printChamber3=86.33333333333333,printChamber4=86.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=101.25232696533203, Elapsed=00:00:27.5856204 [ControlledHeating.cs@486] -06/15/2026 22:24:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=99.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.93844833374024. Used = 99.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 457.7194579, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.061024306987801, Elapsed = 00:07:37.7314207, TimeTotal = 06:10:08.9287908, Remaining = 06:02:31.1973701, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8765798, WeightTotalEstimate = 01:03:39.8765798, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4168280, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:37.7314207, HeatingEstimate = 01:02:22.2805421, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:06.9782710, WeightEstimate = 01:03:39.8765798 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.061024306987801;StartedAtUtc;00:07:37.7314207;06:10:08.9287908;06:02:31.1973701;False;232;0;0;00:00:00;01:03:39.8765798;01:03:39.8765798;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4168280;00:00:00;02:00:00;00:07:37.7314207;01:02:22.2805421;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:06.9782710 [PrintingService.cs@1918] -06/15/2026 22:24:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=87.33333333333333,printChamber1=87.33333333333333,printChamber2=87.33333333333333,printChamber3=87.33333333333333,printChamber4=87.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 101.95790100097656 after 00:00:30.5876580 [ControlledHeating.cs@493] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2298875. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630451. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2954678. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3105924. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:24:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 72689001373 (72689001373 @ 0) for mcu = 591.146069 [15/06/2026 21:12:58] (605.7416781083333 sec) to 75105402001 (from now=74985402001, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 72689001373 (72689001373 @ 0) for mcu = 591.146069 [15/06/2026 21:12:58] (605.7416781083333 sec) to 75105402001 (from external timestamp, flags=None, requested=75105402001 (75105402001 @ 0) for mcu = 611.283128 [15/06/2026 21:13:18] (625.8783500083333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 72689001373 (72689001373 @ 0) for mcu = 591.146069 [15/06/2026 21:12:58] (605.7416781083333 sec) to 75105402001 (from external timestamp, flags=None, requested=75105402001 (75105402001 @ 0) for mcu = 611.283128 [15/06/2026 21:13:18] (625.8783500083333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:24:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:24:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 87.333336 with temperature 82.75 [HeaterCheck.cs@67] -06/15/2026 22:24:44 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:24:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 22:24:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/15/2026 22:24:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:24:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/15/2026 22:24:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/15/2026 22:24:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0163960 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:24:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=100.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.93844833374024. Used = 100.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 465.2190425, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.0947926495142632, Elapsed = 00:07:45.2310079, TimeTotal = 06:10:08.9287934, Remaining = 06:02:23.6977855, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8765798, WeightTotalEstimate = 01:03:39.8765798, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4168280, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:45.2310079, HeatingEstimate = 01:02:14.7809575, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:06.9782710, WeightEstimate = 01:03:39.8765798 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0947926495142632;StartedAtUtc;00:07:45.2310079;06:10:08.9287934;06:02:23.6977855;False;232;0;0;00:00:00;01:03:39.8765798;01:03:39.8765798;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4168280;00:00:00;02:00:00;00:07:45.2310079;01:02:14.7809575;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:06.9782710 [PrintingService.cs@1918] -06/15/2026 22:24:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=88.33333333333333,printChamber1=88.33333333333333,printChamber2=88.33333333333333,printChamber3=88.33333333333333,printChamber4=88.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 88.333336 with temperature 84.25 [HeaterCheck.cs@67] -06/15/2026 22:24:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4151783. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:24:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:24:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:24:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=101.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:24:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.93844833374024. Used = 101.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:24:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 472.7235367, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.128583244323708, Elapsed = 00:07:52.7355378, TimeTotal = 06:10:08.9288291, Remaining = 06:02:16.1932913, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:39.8765798, WeightTotalEstimate = 01:03:39.8765798, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:46.4168280, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:52.7355378, HeatingEstimate = 01:02:07.2764633, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:06.9782710, WeightEstimate = 01:03:39.8765798 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:24:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.128583244323708;StartedAtUtc;00:07:52.7355378;06:10:08.9288291;06:02:16.1932913;False;232;0;0;00:00:00;01:03:39.8765798;01:03:39.8765798;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:46.4168280;00:00:00;02:00:00;00:07:52.7355378;01:02:07.2764633;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:06.9782710 [PrintingService.cs@1918] -06/15/2026 22:24:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=89.33333333333333,printChamber1=89.33333333333333,printChamber2=89.33333333333333,printChamber3=89.33333333333333,printChamber4=89.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:24:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351601, estimate=49.3546131011598 for layer 11, Z=1.1010001 [PrintingService.cs@1524] -06/15/2026 22:24:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 11, island count 7 [PrintingService.cs@1569] -06/15/2026 22:24:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 12, start=0, count=232, Z=1.2010001 [PrintingService.cs@1518] -06/15/2026 22:24:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:25:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=102.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.93844833374024. Used = 102.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 480.2236274, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.162202027701666, Elapsed = 00:08:00.2355895, TimeTotal = 06:10:10.4865016, Remaining = 06:02:10.2509121, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.4342913, WeightTotalEstimate = 01:03:41.4342913, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.9745395, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:00.2355895, HeatingEstimate = 01:01:59.7763726, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.5359825, WeightEstimate = 01:03:41.4342913 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.162202027701666;StartedAtUtc;00:08:00.2355895;06:10:10.4865016;06:02:10.2509121;False;232;0;0;00:00:00;01:03:41.4342913;01:03:41.4342913;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.9745395;00:00:00;02:00:00;00:08:00.2355895;01:01:59.7763726;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.5359825 [PrintingService.cs@1918] -06/15/2026 22:25:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=90.33333333333333,printChamber1=90.33333333333333,printChamber2=90.33333333333333,printChamber3=90.33333333333333,printChamber4=90.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 90.333336 with temperature 85.42857360839844 [HeaterCheck.cs@67] -06/15/2026 22:25:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=102.8150863647461, Elapsed=00:00:27.2228106 [ControlledHeating.cs@486] -06/15/2026 22:25:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=47.33333333333333,powderChamber1=47.33333333333333,powderChamber2=47.33333333333333,powderChamber3=47.33333333333333,powderChamber4=47.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=103.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.93844833374024. Used = 103.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 487.7223129, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.1959640577414725, Elapsed = 00:08:07.7343012, TimeTotal = 06:10:10.4865278, Remaining = 06:02:02.7522266, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.4342913, WeightTotalEstimate = 01:03:41.4342913, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.9745395, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:07.7343012, HeatingEstimate = 01:01:52.2776871, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.5359825, WeightEstimate = 01:03:41.4342913 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1959640577414725;StartedAtUtc;00:08:07.7343012;06:10:10.4865278;06:02:02.7522266;False;232;0;0;00:00:00;01:03:41.4342913;01:03:41.4342913;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.9745395;00:00:00;02:00:00;00:08:07.7343012;01:01:52.2776871;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.5359825 [PrintingService.cs@1918] -06/15/2026 22:25:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=91.33333333333333,printChamber1=91.33333333333333,printChamber2=91.33333333333333,printChamber3=91.33333333333333,printChamber4=91.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 103.0746078491211 after 00:00:30.2216611 [ControlledHeating.cs@493] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3065216. SinceCollect=00:01:00.7486651. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1736, gen1=169, gen2=29, LatencyMode=Interactive, FreeMemory=5969920000, Live=442096376, HeapSizeBytes=446827344, FragmentedBytes=4960888, TotalCommittedBytes=457818112, PinnedObjectsCount=25, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633543. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0651192. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0771898. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:25:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 76316923229 (76316923229 @ 0) for mcu = 621.379246 [15/06/2026 21:13:28] (635.9743602416667 sec) to 78767284554 (from now=78647284554, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 76316923229 (76316923229 @ 0) for mcu = 621.379246 [15/06/2026 21:13:28] (635.9743602416667 sec) to 78767284554 (from external timestamp, flags=None, requested=78767284554 (78767284554 @ 0) for mcu = 641.799292 [15/06/2026 21:13:48] (656.39403795 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 76316923229 (76316923229 @ 0) for mcu = 621.379246 [15/06/2026 21:13:28] (635.9743602416667 sec) to 78767284554 (from external timestamp, flags=None, requested=78767284554 (78767284554 @ 0) for mcu = 641.799292 [15/06/2026 21:13:48] (656.39403795 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:25:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:14 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=36.5 that are outside of set tolerance 10 for current step target 47.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:25:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=104.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.93844833374024. Used = 104.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 495.2250253, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.2297450304929525, Elapsed = 00:08:15.2372243, TimeTotal = 06:10:10.4867385, Remaining = 06:01:55.2495142, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.4342913, WeightTotalEstimate = 01:03:41.4342913, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.9745395, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:15.2372243, HeatingEstimate = 01:01:44.7749747, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.5359825, WeightEstimate = 01:03:41.4342913 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2297450304929525;StartedAtUtc;00:08:15.2372243;06:10:10.4867385;06:01:55.2495142;False;232;0;0;00:00:00;01:03:41.4342913;01:03:41.4342913;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.9745395;00:00:00;02:00:00;00:08:15.2372243;01:01:44.7749747;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.5359825 [PrintingService.cs@1918] -06/15/2026 22:25:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=92.33333333333333,printChamber1=92.33333333333333,printChamber2=92.33333333333333,printChamber3=92.33333333333333,printChamber4=92.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9784808. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1864691. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:25:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:25:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:25:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=105.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.93844833374024. Used = 105.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 502.7286095, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.26352796736915, Elapsed = 00:08:22.7405737, TimeTotal = 06:10:10.4865037, Remaining = 06:01:47.7459300, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.4342913, WeightTotalEstimate = 01:03:41.4342913, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.9745395, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:22.7405737, HeatingEstimate = 01:01:37.2713905, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.5359825, WeightEstimate = 01:03:41.4342913 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.26352796736915;StartedAtUtc;00:08:22.7405737;06:10:10.4865037;06:01:47.7459300;False;232;0;0;00:00:00;01:03:41.4342913;01:03:41.4342913;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.9745395;00:00:00;02:00:00;00:08:22.7405737;01:01:37.2713905;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.5359825 [PrintingService.cs@1918] -06/15/2026 22:25:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=93.33333333333333,printChamber1=93.33333333333333,printChamber2=93.33333333333333,printChamber3=93.33333333333333,printChamber4=93.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 93.333336 with temperature 88 [HeaterCheck.cs@88] -06/15/2026 22:25:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 93.333336 with temperature 88.5 [HeaterCheck.cs@67] -06/15/2026 22:25:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 93.333336 with temperature 88.5 [HeaterCheck.cs@67] -06/15/2026 22:25:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 93.333336 with temperature 88.5 [HeaterCheck.cs@67] -06/15/2026 22:25:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 93.333336 with temperature 88.75 [HeaterCheck.cs@67] -06/15/2026 22:25:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.333332 with temperature 43.25 [HeaterCheck.cs@67] -06/15/2026 22:25:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 93.333336 with temperature 88.39286041259766 [HeaterCheck.cs@67] -06/15/2026 22:25:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=106.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.93844833374024. Used = 106.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 510.2308896, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.2973065088146956, Elapsed = 00:08:30.2429544, TimeTotal = 06:10:10.4866043, Remaining = 06:01:40.2436499, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:03:41.4342913, WeightTotalEstimate = 01:03:41.4342913, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 02:59:47.9745395, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:30.2429544, HeatingEstimate = 01:01:29.7691104, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:15:08.5359825, WeightEstimate = 01:03:41.4342913 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:27:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2973065088146956;StartedAtUtc;00:08:30.2429544;06:10:10.4866043;06:01:40.2436499;False;232;0;0;00:00:00;01:03:41.4342913;01:03:41.4342913;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;02:59:47.9745395;00:00:00;02:00:00;00:08:30.2429544;01:01:29.7691104;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:15:08.5359825 [PrintingService.cs@1918] -06/15/2026 22:25:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=94.33333333333333,printChamber1=94.33333333333333,printChamber2=94.33333333333333,printChamber3=94.33333333333333,printChamber4=94.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 94.333336 with temperature 88.75 [HeaterCheck.cs@88] -06/15/2026 22:25:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 94.333336 with temperature 89.46428680419922 [HeaterCheck.cs@67] -06/15/2026 22:25:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.333336 with temperature 89.5 [HeaterCheck.cs@67] -06/15/2026 22:25:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.333332 with temperature 43.75 [HeaterCheck.cs@67] -06/15/2026 22:25:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.333336 with temperature 89.5 [HeaterCheck.cs@67] -06/15/2026 22:25:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.333336 with temperature 89.5 [HeaterCheck.cs@67] -06/15/2026 22:25:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:25:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=106.906982421875, Elapsed=00:00:27.5054997 [ControlledHeating.cs@486] -06/15/2026 22:25:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262862, estimate=49.250386622711 for layer 12, Z=1.2010001 [PrintingService.cs@1524] -06/15/2026 22:25:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 12, island count 7 [PrintingService.cs@1569] -06/15/2026 22:25:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 13, start=0, count=232, Z=1.3010001 [PrintingService.cs@1518] -06/15/2026 22:25:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:25:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=107.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.93844833374024. Used = 107.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 517.7325784, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.3242729099493604, Elapsed = 00:08:37.7446430, TimeTotal = 06:11:15.5529604, Remaining = 06:02:37.8083174, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5006476, WeightTotalEstimate = 01:04:46.5006476, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0408958, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:37.7446430, HeatingEstimate = 01:01:22.2674216, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6023388, WeightEstimate = 01:04:46.5006476 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3242729099493604;StartedAtUtc;00:08:37.7446430;06:11:15.5529604;06:02:37.8083174;False;232;0;0;00:00:00;01:04:46.5006476;01:04:46.5006476;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0408958;00:00:00;02:00:00;00:08:37.7446430;01:01:22.2674216;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6023388 [PrintingService.cs@1918] -06/15/2026 22:25:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=95.33333333333333,printChamber1=95.33333333333333,printChamber2=95.33333333333333,printChamber3=95.33333333333333,printChamber4=95.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 95.333336 with temperature 90 [HeaterCheck.cs@88] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 47.333332 with temperature 45.25 [HeaterCheck.cs@67] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 107.95589447021484 after 00:00:30.5058652 [ControlledHeating.cs@493] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1967238. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631816. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2656948. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2802975. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:25:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 79978805782 (79978805782 @ 0) for mcu = 651.895538 [15/06/2026 21:13:58] (666.4900481833333 sec) to 82391550391 (from now=82271550391, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 79978805782 (79978805782 @ 0) for mcu = 651.895538 [15/06/2026 21:13:58] (666.4900481833333 sec) to 82391550391 (from external timestamp, flags=None, requested=82391550391 (82391550391 @ 0) for mcu = 672.002132 [15/06/2026 21:14:19] (686.5962532583334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 79978805782 (79978805782 @ 0) for mcu = 651.895538 [15/06/2026 21:13:58] (666.4900481833333 sec) to 82391550391 (from external timestamp, flags=None, requested=82391550391 (82391550391 @ 0) for mcu = 672.002132 [15/06/2026 21:14:19] (686.5962532583334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:25:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:25:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 95.333336 with temperature 90.5 [HeaterCheck.cs@67] -06/15/2026 22:25:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 47.333332 with temperature 43.25 [HeaterCheck.cs@67] -06/15/2026 22:25:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 95.333336 with temperature 90.5 [HeaterCheck.cs@67] -06/15/2026 22:25:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0452892 ~ 5.98 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:25:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=108.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.93844833374024. Used = 108.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 525.2353981, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.357954337384258, Elapsed = 00:08:45.2473649, TimeTotal = 06:11:15.5528626, Remaining = 06:02:30.3054977, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5006476, WeightTotalEstimate = 01:04:46.5006476, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0408958, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:45.2473649, HeatingEstimate = 01:01:14.7646019, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6023388, WeightEstimate = 01:04:46.5006476 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.357954337384258;StartedAtUtc;00:08:45.2473649;06:11:15.5528626;06:02:30.3054977;False;232;0;0;00:00:00;01:04:46.5006476;01:04:46.5006476;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0408958;00:00:00;02:00:00;00:08:45.2473649;01:01:14.7646019;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6023388 [PrintingService.cs@1918] -06/15/2026 22:25:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=96.33333333333333,printChamber1=96.33333333333333,printChamber2=96.33333333333333,printChamber3=96.33333333333333,printChamber4=96.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=48.33333333333333,powderChamber1=48.33333333333333,powderChamber2=48.33333333333333,powderChamber3=48.33333333333333,powderChamber4=48.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 44.5 [HeaterCheck.cs@67] -06/15/2026 22:25:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.75 [HeaterCheck.cs@67] -06/15/2026 22:25:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.75 [HeaterCheck.cs@67] -06/15/2026 22:25:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 44 [HeaterCheck.cs@67] -06/15/2026 22:25:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9944070. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3872213. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:25:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:25:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:25:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 44 [HeaterCheck.cs@67] -06/15/2026 22:25:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 48.333332 with temperature 37.5 [HeaterCheck.cs@111] -06/15/2026 22:25:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 44.25 [HeaterCheck.cs@67] -06/15/2026 22:25:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=109.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:25:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.93844833374024. Used = 109.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:25:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 532.7346977, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.3916206930452417, Elapsed = 00:08:52.7467334, TimeTotal = 06:11:15.5529315, Remaining = 06:02:22.8061981, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5006476, WeightTotalEstimate = 01:04:46.5006476, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0408958, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:52.7467334, HeatingEstimate = 01:01:07.2653023, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6023388, WeightEstimate = 01:04:46.5006476 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:25:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3916206930452417;StartedAtUtc;00:08:52.7467334;06:11:15.5529315;06:02:22.8061981;False;232;0;0;00:00:00;01:04:46.5006476;01:04:46.5006476;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0408958;00:00:00;02:00:00;00:08:52.7467334;01:01:07.2653023;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6023388 [PrintingService.cs@1918] -06/15/2026 22:25:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=97.33333333333333,printChamber1=97.33333333333333,printChamber2=97.33333333333333,printChamber3=97.33333333333333,printChamber4=97.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:25:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=38.25 that are outside of set tolerance 10 for current step target 48.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:25:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 97.333336 with temperature 92.25 [HeaterCheck.cs@88] -06/15/2026 22:25:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 97.333336 with temperature 92.5 [HeaterCheck.cs@67] -06/15/2026 22:25:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.5 [HeaterCheck.cs@67] -06/15/2026 22:25:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 97.333336 with temperature 92.5 [HeaterCheck.cs@67] -06/15/2026 22:25:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.5 [HeaterCheck.cs@67] -06/15/2026 22:25:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 97.333336 with temperature 92.5 [HeaterCheck.cs@67] -06/15/2026 22:25:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 97.333336 with temperature 92.5 [HeaterCheck.cs@67] -06/15/2026 22:26:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=110.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.93844833374024. Used = 110.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 44 [HeaterCheck.cs@67] -06/15/2026 22:26:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 540.2351909, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.4252918334508053, Elapsed = 00:09:00.2471646, TimeTotal = 06:11:15.5528695, Remaining = 06:02:15.3057049, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5006476, WeightTotalEstimate = 01:04:46.5006476, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0408958, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:00.2471646, HeatingEstimate = 01:00:59.7648091, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6023388, WeightEstimate = 01:04:46.5006476 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:26:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4252918334508053;StartedAtUtc;00:09:00.2471646;06:11:15.5528695;06:02:15.3057049;False;232;0;0;00:00:00;01:04:46.5006476;01:04:46.5006476;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0408958;00:00:00;02:00:00;00:09:00.2471646;01:00:59.7648091;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6023388 [PrintingService.cs@1918] -06/15/2026 22:26:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=98.33333333333333,printChamber1=98.33333333333333,printChamber2=98.33333333333333,printChamber3=98.33333333333333,printChamber4=98.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 98.333336 with temperature 93 [HeaterCheck.cs@88] -06/15/2026 22:26:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 44 [HeaterCheck.cs@67] -06/15/2026 22:26:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 98.333336 with temperature 93.75 [HeaterCheck.cs@67] -06/15/2026 22:26:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 98.333336 with temperature 93.5 [HeaterCheck.cs@67] -06/15/2026 22:26:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.5 [HeaterCheck.cs@67] -06/15/2026 22:26:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 45.25 [HeaterCheck.cs@67] -06/15/2026 22:26:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=110.65726470947266, Elapsed=00:00:27.2033233 [ControlledHeating.cs@486] -06/15/2026 22:26:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=111.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.75 [HeaterCheck.cs@67] -06/15/2026 22:26:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.93844833374024. Used = 111.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 547.7363466, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.4589661662224263, Elapsed = 00:09:07.7483081, TimeTotal = 06:11:15.5528573, Remaining = 06:02:07.8045492, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5006476, WeightTotalEstimate = 01:04:46.5006476, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0408958, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:07.7483081, HeatingEstimate = 01:00:52.2636534, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6023388, WeightEstimate = 01:04:46.5006476 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:26:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4589661662224263;StartedAtUtc;00:09:07.7483081;06:11:15.5528573;06:02:07.8045492;False;232;0;0;00:00:00;01:04:46.5006476;01:04:46.5006476;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0408958;00:00:00;02:00:00;00:09:07.7483081;01:00:52.2636534;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6023388 [PrintingService.cs@1918] -06/15/2026 22:26:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=99.33333333333333,printChamber1=99.33333333333333,printChamber2=99.33333333333333,printChamber3=99.33333333333333,printChamber4=99.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.5 [HeaterCheck.cs@67] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 112.11141204833984 after 00:00:30.2022930 [ControlledHeating.cs@493] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 48.333332 with temperature 43.5 [HeaterCheck.cs@67] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2918748. SinceCollect=00:01:00.6936057. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1849, gen1=175, gen2=30, LatencyMode=Interactive, FreeMemory=5965135872, Live=441094136, HeapSizeBytes=445861192, FragmentedBytes=5086640, TotalCommittedBytes=454918144, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (3 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0620214. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0679650. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0791116. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:26:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 83603071619 (83603071619 @ 0) for mcu = 682.098362 [15/06/2026 21:14:29] (696.6922634916667 sec) to 86050470969 (from now=85930470969, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 83603071619 (83603071619 @ 0) for mcu = 682.098362 [15/06/2026 21:14:29] (696.6922634916667 sec) to 86050470969 (from external timestamp, flags=None, requested=86050470969 (86050470969 @ 0) for mcu = 702.493758 [15/06/2026 21:14:49] (717.087258075 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 83603071619 (83603071619 @ 0) for mcu = 682.098362 [15/06/2026 21:14:29] (696.6922634916667 sec) to 86050470969 (from external timestamp, flags=None, requested=86050470969 (86050470969 @ 0) for mcu = 702.493758 [15/06/2026 21:14:49] (717.087258075 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:26:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=49.33333333333333,powderChamber1=49.33333333333333,powderChamber2=49.33333333333333,powderChamber3=49.33333333333333,powderChamber4=49.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 49.333332 with temperature 44.5 [HeaterCheck.cs@67] -06/15/2026 22:26:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.333332 with temperature 45 [HeaterCheck.cs@67] -06/15/2026 22:26:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=112.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.93844833374024. Used = 112.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 555.2343313, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.4926263188483233, Elapsed = 00:09:15.2462932, TimeTotal = 06:11:15.5528577, Remaining = 06:02:00.3065645, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:46.5006476, WeightTotalEstimate = 01:04:46.5006476, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:53.0408958, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:15.2462932, HeatingEstimate = 01:00:44.7656687, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:13.6023388, WeightEstimate = 01:04:46.5006476 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:17. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:26:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4926263188483233;StartedAtUtc;00:09:15.2462932;06:11:15.5528577;06:02:00.3065645;False;232;0;0;00:00:00;01:04:46.5006476;01:04:46.5006476;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:53.0408958;00:00:00;02:00:00;00:09:15.2462932;01:00:44.7656687;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:13.6023388 [PrintingService.cs@1918] -06/15/2026 22:26:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=100.33333333333333,printChamber1=100.33333333333333,printChamber2=100.33333333333333,printChamber3=100.33333333333333,printChamber4=100.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 49.333332 with temperature 45 [HeaterCheck.cs@67] -06/15/2026 22:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351459, estimate=49.397387236559624 for layer 13, Z=1.3010001 [PrintingService.cs@1524] -06/15/2026 22:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 13, island count 7 [PrintingService.cs@1569] -06/15/2026 22:26:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 14, start=0, count=232, Z=1.401 [PrintingService.cs@1518] -06/15/2026 22:26:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:26:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=50.33333333333333,powderChamber1=50.33333333333333,powderChamber2=50.33333333333333,powderChamber3=50.33333333333333,powderChamber4=50.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 50.333332 with temperature 45.25 [HeaterCheck.cs@88] -06/15/2026 22:26:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9811825. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1869528. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:26:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:26:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:26:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=113.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.93844833374024. Used = 113.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:24 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=89.32142639160156 that are outside of set tolerance 10 for current step target 100.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:26:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 565.7362858, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.539419234602993, Elapsed = 00:09:25.7482502, TimeTotal = 06:11:18.6471210, Remaining = 06:01:52.8988708, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:49.5949084, WeightTotalEstimate = 01:04:49.5949084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:56.1351566, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:25.7482502, HeatingEstimate = 01:00:34.2637142, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:16.6965996, WeightEstimate = 01:04:49.5949084 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:26:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.539419234602993;StartedAtUtc;00:09:25.7482502;06:11:18.6471210;06:01:52.8988708;False;232;0;0;00:00:00;01:04:49.5949084;01:04:49.5949084;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:56.1351566;00:00:00;02:00:00;00:09:25.7482502;01:00:34.2637142;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:16.6965996 [PrintingService.cs@1918] -06/15/2026 22:26:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=101.33333333333333,printChamber1=101.33333333333333,printChamber2=101.33333333333333,printChamber3=101.33333333333333,printChamber4=101.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:29 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=35.75 that are outside of set tolerance 10 for current step target 50.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:26:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.333336 with temperature 96.5 [HeaterCheck.cs@67] -06/15/2026 22:26:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 46.75 [HeaterCheck.cs@67] -06/15/2026 22:26:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=114.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.93844833374024. Used = 114.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:26:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 46 [HeaterCheck.cs@67] -06/15/2026 22:26:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=90.71428680419922 that are outside of set tolerance 10 for current step target 101.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:26:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.333336 with temperature 97.5 [HeaterCheck.cs@67] -06/15/2026 22:26:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=115.046142578125, Elapsed=00:00:27.4917878 [ControlledHeating.cs@486] -06/15/2026 22:26:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.333336 with temperature 96.75 [HeaterCheck.cs@67] -06/15/2026 22:26:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=115.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.93844833374024. Used = 115.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:26:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.333336 with temperature 96.5 [HeaterCheck.cs@67] -06/15/2026 22:26:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 101.333336 with temperature 96.5 [HeaterCheck.cs@67] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 116.22018432617188 after 00:00:30.4962180 [ControlledHeating.cs@493] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2093416. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631980. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2770300. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2878492. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:26:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 87261992197 (87261992197 @ 0) for mcu = 712.589965 [15/06/2026 21:14:59] (727.1832683083334 sec) to 89675416065 (from now=89555416065, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 87261992197 (87261992197 @ 0) for mcu = 712.589965 [15/06/2026 21:14:59] (727.1832683083334 sec) to 89675416065 (from external timestamp, flags=None, requested=89675416065 (89675416065 @ 0) for mcu = 732.702224 [15/06/2026 21:15:19] (747.295133875 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 87261992197 (87261992197 @ 0) for mcu = 712.589965 [15/06/2026 21:14:59] (727.1832683083334 sec) to 89675416065 (from external timestamp, flags=None, requested=89675416065 (89675416065 @ 0) for mcu = 732.702224 [15/06/2026 21:15:19] (747.295133875 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:26:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:26:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:26:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:26:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 584.2425174, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.6224864183752086, Elapsed = 00:09:44.2544953, TimeTotal = 06:11:18.6471345, Remaining = 06:01:34.3926392, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:49.5949084, WeightTotalEstimate = 01:04:49.5949084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:56.1351566, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:44.2544953, HeatingEstimate = 01:00:15.7574826, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:16.6965996, WeightEstimate = 01:04:49.5949084 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:26:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.6224864183752086;StartedAtUtc;00:09:44.2544953;06:11:18.6471345;06:01:34.3926392;False;232;0;0;00:00:00;01:04:49.5949084;01:04:49.5949084;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:56.1351566;00:00:00;02:00:00;00:09:44.2544953;01:00:15.7574826;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:16.6965996 [PrintingService.cs@1918] -06/15/2026 22:26:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=102.33333333333333,printChamber1=102.33333333333333,printChamber2=102.33333333333333,printChamber3=102.33333333333333,printChamber4=102.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1384731 ~ 5.99 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:26:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 102.333336 with temperature 97.5 [HeaterCheck.cs@67] -06/15/2026 22:26:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=116.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.93844833374024. Used = 116.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 102.333336 with temperature 97.5 [HeaterCheck.cs@67] -06/15/2026 22:26:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 102.333336 with temperature 98 [HeaterCheck.cs@67] -06/15/2026 22:26:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:26:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9978873. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3944213. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:26:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:26:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:26:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=91.35713958740234 that are outside of set tolerance 10 for current step target 102.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:26:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=117.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:26:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.93844833374024. Used = 117.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:26:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 592.7418894, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.660636638057909, Elapsed = 00:09:52.7538476, TimeTotal = 06:11:18.6471148, Remaining = 06:01:25.8932672, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:04:49.5949084, WeightTotalEstimate = 01:04:49.5949084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:00:56.1351566, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:52.7538476, HeatingEstimate = 01:00:07.2581106, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:16.6965996, WeightEstimate = 01:04:49.5949084 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:26:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.660636638057909;StartedAtUtc;00:09:52.7538476;06:11:18.6471148;06:01:25.8932672;False;232;0;0;00:00:00;01:04:49.5949084;01:04:49.5949084;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:00:56.1351566;00:00:00;02:00:00;00:09:52.7538476;01:00:07.2581106;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:16.6965996 [PrintingService.cs@1918] -06/15/2026 22:26:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=103.33333333333333,printChamber1=103.33333333333333,printChamber2=103.33333333333333,printChamber3=103.33333333333333,printChamber4=103.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:26:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 103.333336 with temperature 99 [HeaterCheck.cs@67] -06/15/2026 22:26:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262860, estimate=49.35600229400919 for layer 14, Z=1.401 [PrintingService.cs@1524] -06/15/2026 22:26:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:26:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 14, island count 7 [PrintingService.cs@1569] -06/15/2026 22:26:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 15, start=0, count=232, Z=1.501 [PrintingService.cs@1518] -06/15/2026 22:26:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:26:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:26:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 103.333336 with temperature 98.5 [HeaterCheck.cs@67] -06/15/2026 22:27:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 103.333336 with temperature 98.5 [HeaterCheck.cs@67] -06/15/2026 22:27:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 103.333336 with temperature 98.5 [HeaterCheck.cs@67] -06/15/2026 22:27:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=118.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.93844833374024. Used = 118.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 600.242957, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.690650485787632, Elapsed = 00:10:00.2549328, TimeTotal = 06:11:48.9151107, Remaining = 06:01:48.6601779, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.8628867, WeightTotalEstimate = 01:05:19.8628867, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.4031349, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:00.2549328, HeatingEstimate = 00:59:59.7570430, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.9645779, WeightEstimate = 01:05:19.8628867 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.690650485787632;StartedAtUtc;00:10:00.2549328;06:11:48.9151107;06:01:48.6601779;False;232;0;0;00:00:00;01:05:19.8628867;01:05:19.8628867;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.4031349;00:00:00;02:00:00;00:10:00.2549328;00:59:59.7570430;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.9645779 [PrintingService.cs@1918] -06/15/2026 22:27:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=104.33333333333333,printChamber1=104.33333333333333,printChamber2=104.33333333333333,printChamber3=104.33333333333333,printChamber4=104.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:27:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 104.333336 with temperature 98.5 [HeaterCheck.cs@88] -06/15/2026 22:27:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 104.333336 with temperature 100 [HeaterCheck.cs@67] -06/15/2026 22:27:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:27:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 104.333336 with temperature 99.46428680419922 [HeaterCheck.cs@67] -06/15/2026 22:27:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=118.6891098022461, Elapsed=00:00:27.2133126 [ControlledHeating.cs@486] -06/15/2026 22:27:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=119.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.93844833374024. Used = 119.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 607.7469895, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.724287347739188, Elapsed = 00:10:07.7589514, TimeTotal = 06:11:48.9150968, Remaining = 06:01:41.1561454, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.8628867, WeightTotalEstimate = 01:05:19.8628867, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.4031349, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:07.7589514, HeatingEstimate = 00:59:52.2530105, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.9645779, WeightEstimate = 01:05:19.8628867 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:27:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.724287347739188;StartedAtUtc;00:10:07.7589514;06:11:48.9150968;06:01:41.1561454;False;232;0;0;00:00:00;01:05:19.8628867;01:05:19.8628867;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.4031349;00:00:00;02:00:00;00:10:07.7589514;00:59:52.2530105;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.9645779 [PrintingService.cs@1918] -06/15/2026 22:27:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=105.33333333333333,printChamber1=105.33333333333333,printChamber2=105.33333333333333,printChamber3=105.33333333333333,printChamber4=105.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:27:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 120.35227966308594 after 00:00:30.2138522 [ControlledHeating.cs@493] -06/15/2026 22:27:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3977706. SinceCollect=00:01:00.8167553. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1965, gen1=186, gen2=31, LatencyMode=Interactive, FreeMemory=5968920576, Live=441203656, HeapSizeBytes=445761584, FragmentedBytes=5031848, TotalCommittedBytes=454918144, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633461. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0650384. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0781390. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:27:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 90886937293 (90886937293 @ 0) for mcu = 742.798465 [15/06/2026 21:15:29] (757.3911441083334 sec) to 93348217239 (from now=93228217239, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 90886937293 (90886937293 @ 0) for mcu = 742.798465 [15/06/2026 21:15:29] (757.3911441083334 sec) to 93348217239 (from external timestamp, flags=None, requested=93348217239 (93348217239 @ 0) for mcu = 763.309551 [15/06/2026 21:15:50] (777.901810325 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 90886937293 (90886937293 @ 0) for mcu = 742.798465 [15/06/2026 21:15:29] (757.3911441083334 sec) to 93348217239 (from external timestamp, flags=None, requested=93348217239 (93348217239 @ 0) for mcu = 763.309551 [15/06/2026 21:15:50] (777.901810325 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:27:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 50.333332 with temperature 38.25 [HeaterCheck.cs@111] -06/15/2026 22:27:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 105.333336 with temperature 100.5 [HeaterCheck.cs@67] -06/15/2026 22:27:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 47.25 [HeaterCheck.cs@67] -06/15/2026 22:27:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 46 [HeaterCheck.cs@67] -06/15/2026 22:27:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=120.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.93844833374024. Used = 120.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 615.2507877, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.7579232601702115, Elapsed = 00:10:15.2627588, TimeTotal = 06:11:48.9151060, Remaining = 06:01:33.6523472, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.8628867, WeightTotalEstimate = 01:05:19.8628867, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.4031349, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:15.2627588, HeatingEstimate = 00:59:44.7492123, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.9645779, WeightEstimate = 01:05:19.8628867 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:27:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7579232601702115;StartedAtUtc;00:10:15.2627588;06:11:48.9151060;06:01:33.6523472;False;232;0;0;00:00:00;01:05:19.8628867;01:05:19.8628867;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.4031349;00:00:00;02:00:00;00:10:15.2627588;00:59:44.7492123;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.9645779 [PrintingService.cs@1918] -06/15/2026 22:27:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=106.33333333333333,printChamber1=106.33333333333333,printChamber2=106.33333333333333,printChamber3=106.33333333333333,printChamber4=106.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:27:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 106.333336 with temperature 101 [HeaterCheck.cs@88] -06/15/2026 22:27:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 106.333336 with temperature 101.5 [HeaterCheck.cs@67] -06/15/2026 22:27:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 106.333336 with temperature 101.75 [HeaterCheck.cs@67] -06/15/2026 22:27:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:27:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 106.333336 with temperature 101.5 [HeaterCheck.cs@67] -06/15/2026 22:27:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9882850. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1861133. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:27:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:27:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:27:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 46.75 [HeaterCheck.cs@67] -06/15/2026 22:27:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=121.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.93844833374024. Used = 121.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 622.7506645, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.7915418789486552, Elapsed = 00:10:22.7627100, TimeTotal = 06:11:48.9151804, Remaining = 06:01:26.1524704, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.8628867, WeightTotalEstimate = 01:05:19.8628867, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.4031349, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:22.7627100, HeatingEstimate = 00:59:37.2493355, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.9645779, WeightEstimate = 01:05:19.8628867 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:27:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7915418789486552;StartedAtUtc;00:10:22.7627100;06:11:48.9151804;06:01:26.1524704;False;232;0;0;00:00:00;01:05:19.8628867;01:05:19.8628867;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.4031349;00:00:00;02:00:00;00:10:22.7627100;00:59:37.2493355;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.9645779 [PrintingService.cs@1918] -06/15/2026 22:27:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=107.33333333333333,printChamber1=107.33333333333333,printChamber2=107.33333333333333,printChamber3=107.33333333333333,printChamber4=107.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:27:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 107.333336 with temperature 102 [HeaterCheck.cs@88] -06/15/2026 22:27:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 107.333336 with temperature 103.25 [HeaterCheck.cs@67] -06/15/2026 22:27:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 107.333336 with temperature 102.5 [HeaterCheck.cs@67] -06/15/2026 22:27:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 107.333336 with temperature 102.5 [HeaterCheck.cs@67] -06/15/2026 22:27:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 46 [HeaterCheck.cs@67] -06/15/2026 22:27:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 107.333336 with temperature 102.5 [HeaterCheck.cs@67] -06/15/2026 22:27:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:27:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=122.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.93844833374024. Used = 122.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:31 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=97 that are outside of set tolerance 10 for current step target 107.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:27:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 107.333336 with temperature 102.5 [HeaterCheck.cs@67] -06/15/2026 22:27:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 107.333336 with temperature 103 [HeaterCheck.cs@67] -06/15/2026 22:27:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 631.2508868, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 2.8296438904965604, Elapsed = 00:10:31.2628532, TimeTotal = 06:11:48.9151013, Remaining = 06:01:17.6522481, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:19.8628867, WeightTotalEstimate = 01:05:19.8628867, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:01:26.4031349, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:31.2628532, HeatingEstimate = 00:59:28.7491132, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:16:46.9645779, WeightEstimate = 01:05:19.8628867 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:28:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:27:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8296438904965604;StartedAtUtc;00:10:31.2628532;06:11:48.9151013;06:01:17.6522481;False;232;0;0;00:00:00;01:05:19.8628867;01:05:19.8628867;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:01:26.4031349;00:00:00;02:00:00;00:10:31.2628532;00:59:28.7491132;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:16:46.9645779 [PrintingService.cs@1918] -06/15/2026 22:27:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=108.33333333333333,printChamber1=108.33333333333333,printChamber2=108.33333333333333,printChamber3=108.33333333333333,printChamber4=108.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:27:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 108.333336 with temperature 102.5 [HeaterCheck.cs@88] -06/15/2026 22:27:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 108.333336 with temperature 103 [HeaterCheck.cs@88] -06/15/2026 22:27:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:27:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 108.333336 with temperature 103.5 [HeaterCheck.cs@67] -06/15/2026 22:27:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 108.333336 with temperature 103.5 [HeaterCheck.cs@67] -06/15/2026 22:27:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 108.333336 with temperature 103.5 [HeaterCheck.cs@67] -06/15/2026 22:27:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 108.333336 with temperature 103.5 [HeaterCheck.cs@67] -06/15/2026 22:27:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 50.333332 with temperature 41.5 [HeaterCheck.cs@111] -06/15/2026 22:27:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351657, estimate=49.30488451725201 for layer 15, Z=1.501 [PrintingService.cs@1524] -06/15/2026 22:27:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 108.333336 with temperature 104 [HeaterCheck.cs@67] -06/15/2026 22:27:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 108.333336 with temperature 103.5 [HeaterCheck.cs@67] -06/15/2026 22:27:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 15, island count 7 [PrintingService.cs@1569] -06/15/2026 22:27:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 16, start=0, count=232, Z=1.6010001 [PrintingService.cs@1518] -06/15/2026 22:27:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:27:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=123.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.93844833374024. Used = 123.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=122.85259246826172, Elapsed=00:00:27.5977207 [ControlledHeating.cs@486] -06/15/2026 22:27:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=97.75 that are outside of set tolerance 10 for current step target 108.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:27:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 123.37137603759766 after 00:00:30.6002452 [ControlledHeating.cs@493] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2029042. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633422. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2662880. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2786310. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:27:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 94559738467 (94559738467 @ 0) for mcu = 773.405714 [15/06/2026 21:16:00] (787.9978205583334 sec) to 96972211422 (from now=96852211422, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 94559738467 (94559738467 @ 0) for mcu = 773.405714 [15/06/2026 21:16:00] (787.9978205583334 sec) to 96972211422 (from external timestamp, flags=None, requested=96972211422 (96972211422 @ 0) for mcu = 793.510053 [15/06/2026 21:16:20] (808.10176185 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 94559738467 (94559738467 @ 0) for mcu = 773.405714 [15/06/2026 21:16:00] (787.9978205583334 sec) to 96972211422 (from external timestamp, flags=None, requested=96972211422 (96972211422 @ 0) for mcu = 793.510053 [15/06/2026 21:16:20] (808.10176185 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:27:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:27:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.75 [HeaterCheck.cs@67] -06/15/2026 22:27:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1147577 ~ 5.99 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:27:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=124.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.93844833374024. Used = 124.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.333332 with temperature 45.5 [HeaterCheck.cs@67] -06/15/2026 22:27:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=51.33333333333333,powderChamber1=51.33333333333333,powderChamber2=51.33333333333333,powderChamber3=51.33333333333333,powderChamber4=51.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:27:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 51.333332 with temperature 45.5 [HeaterCheck.cs@88] -06/15/2026 22:27:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9889346. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3864236. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:27:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:27:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:27:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=125.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:27:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.93844833374024. Used = 125.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:27:58 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=41,powderChamber4=41.25 that are outside of set tolerance 10 for current step target 51.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:28:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=126.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.93844833374024. Used = 126.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 108.333336 with temperature 95.75 [HeaterCheck.cs@111] -06/15/2026 22:28:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:28:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.75 [HeaterCheck.cs@67] -06/15/2026 22:28:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=127.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.93844833374024. Used = 127.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=126.95235443115234, Elapsed=00:00:27.2159907 [ControlledHeating.cs@486] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 127.91861724853516 after 00:00:30.2152623 [ControlledHeating.cs@493] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2826273. SinceCollect=00:01:00.6976203. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2080, gen1=196, gen2=32, LatencyMode=Interactive, FreeMemory=5977473024, Live=441013656, HeapSizeBytes=445694232, FragmentedBytes=5064672, TotalCommittedBytes=453951488, PinnedObjectsCount=27, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633941. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0693849. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0820760. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:28:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 98183732650 (98183732650 @ 0) for mcu = 803.606278 [15/06/2026 21:16:30] (818.1977720833333 sec) to 100632264055 (from now=100512264055, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 98183732650 (98183732650 @ 0) for mcu = 803.606278 [15/06/2026 21:16:30] (818.1977720833333 sec) to 100632264055 (from external timestamp, flags=None, requested=100632264055 (100632264055 @ 0) for mcu = 824.011123 [15/06/2026 21:16:51] (838.6022004583333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 98183732650 (98183732650 @ 0) for mcu = 803.606278 [15/06/2026 21:16:30] (818.1977720833333 sec) to 100632264055 (from external timestamp, flags=None, requested=100632264055 (100632264055 @ 0) for mcu = 824.011123 [15/06/2026 21:16:51] (838.6022004583333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:28:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=128.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.93844833374024. Used = 128.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262867, estimate=49.34744116762483 for layer 16, Z=1.6010001 [PrintingService.cs@1524] -06/15/2026 22:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 16, island count 7 [PrintingService.cs@1569] -06/15/2026 22:28:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 17, start=0, count=232, Z=1.7010001 [PrintingService.cs@1518] -06/15/2026 22:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:28:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.75 [HeaterCheck.cs@67] -06/15/2026 22:28:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:28:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:28:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 108.333336 with temperature 103.64286041259766 [HeaterCheck.cs@67] -06/15/2026 22:28:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 47.25 [HeaterCheck.cs@67] -06/15/2026 22:28:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9819865. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1902447. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:28:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:28:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:28:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=129.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.93844833374024. Used = 129.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.75 [HeaterCheck.cs@67] -06/15/2026 22:28:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 688.7896295, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.082444665261279, Elapsed = 00:11:28.8016785, TimeTotal = 06:12:25.9543739, Remaining = 06:00:57.1526954, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.9020767, WeightTotalEstimate = 01:05:56.9020767, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.4423249, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:28.8016785, HeatingEstimate = 00:58:31.2103705, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:24.0037679, WeightEstimate = 01:05:56.9020767 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:28:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.082444665261279;StartedAtUtc;00:11:28.8016785;06:12:25.9543739;06:00:57.1526954;False;232;0;0;00:00:00;01:05:56.9020767;01:05:56.9020767;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.4423249;00:00:00;02:00:00;00:11:28.8016785;00:58:31.2103705;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:24.0037679 [PrintingService.cs@1918] -06/15/2026 22:28:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=109.33333333333333,printChamber1=109.33333333333333,printChamber2=109.33333333333333,printChamber3=109.33333333333333,printChamber4=109.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:28:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=130.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 130.93844833374024. Used = 130.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:28:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=98.75 that are outside of set tolerance 10 for current step target 109.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:28:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 697.2956408, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.120509408313479, Elapsed = 00:11:37.3076060, TimeTotal = 06:12:25.9542901, Remaining = 06:00:48.6466841, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.9020767, WeightTotalEstimate = 01:05:56.9020767, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.4423249, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:37.3076060, HeatingEstimate = 00:58:22.7043592, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:24.0037679, WeightEstimate = 01:05:56.9020767 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:28:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.120509408313479;StartedAtUtc;00:11:37.3076060;06:12:25.9542901;06:00:48.6466841;False;232;0;0;00:00:00;01:05:56.9020767;01:05:56.9020767;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.4423249;00:00:00;02:00:00;00:11:37.3076060;00:58:22.7043592;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:24.0037679 [PrintingService.cs@1918] -06/15/2026 22:28:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=110.33333333333333,printChamber1=110.33333333333333,printChamber2=110.33333333333333,printChamber3=110.33333333333333,printChamber4=110.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:28:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=131.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 131.93844833374024. Used = 131.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=131.5165252685547, Elapsed=00:00:27.4849957 [ControlledHeating.cs@486] -06/15/2026 22:28:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 51.333332 with temperature 40.25 [HeaterCheck.cs@111] -06/15/2026 22:28:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 131.55438232421875 after 00:00:30.4826783 [ControlledHeating.cs@493] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2005831. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633385. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2648033. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2794105. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:28:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 101843785283 (101843785283 @ 0) for mcu = 834.107315 [15/06/2026 21:17:01] (848.6982106916666 sec) to 104255883659 (from now=104135883659, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 101843785283 (101843785283 @ 0) for mcu = 834.107315 [15/06/2026 21:17:01] (848.6982106916666 sec) to 104255883659 (from external timestamp, flags=None, requested=104255883659 (104255883659 @ 0) for mcu = 854.208539 [15/06/2026 21:17:21] (868.7990304916667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 101843785283 (101843785283 @ 0) for mcu = 834.107315 [15/06/2026 21:17:01] (848.6982106916666 sec) to 104255883659 (from external timestamp, flags=None, requested=104255883659 (104255883659 @ 0) for mcu = 854.208539 [15/06/2026 21:17:21] (868.7990304916667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:28:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:28:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 704.7949716, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.1540695351666455, Elapsed = 00:11:44.8069366, TimeTotal = 06:12:25.9542899, Remaining = 06:00:41.1473533, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.9020767, WeightTotalEstimate = 01:05:56.9020767, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.4423249, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:44.8069366, HeatingEstimate = 00:58:15.2050284, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:24.0037679, WeightEstimate = 01:05:56.9020767 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:28:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1540695351666455;StartedAtUtc;00:11:44.8069366;06:12:25.9542899;06:00:41.1473533;False;232;0;0;00:00:00;01:05:56.9020767;01:05:56.9020767;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.4423249;00:00:00;02:00:00;00:11:44.8069366;00:58:15.2050284;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:24.0037679 [PrintingService.cs@1918] -06/15/2026 22:28:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=111.33333333333333,printChamber1=111.33333333333333,printChamber2=111.33333333333333,printChamber3=111.33333333333333,printChamber4=111.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:28:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0354591 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:28:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=132.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 132.93844833374024. Used = 132.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 111.333336 with temperature 106.5 [HeaterCheck.cs@67] -06/15/2026 22:28:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 111.333336 with temperature 106.75 [HeaterCheck.cs@67] -06/15/2026 22:28:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 111.333336 with temperature 106.5 [HeaterCheck.cs@67] -06/15/2026 22:28:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 111.333336 with temperature 106.75 [HeaterCheck.cs@67] -06/15/2026 22:28:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 712.2944535, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.187630677435025, Elapsed = 00:11:52.3064966, TimeTotal = 06:12:25.9543680, Remaining = 06:00:33.6478714, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:56.9020767, WeightTotalEstimate = 01:05:56.9020767, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:03.4423249, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:52.3064966, HeatingEstimate = 00:58:07.7055465, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:24.0037679, WeightEstimate = 01:05:56.9020767 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:28:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.187630677435025;StartedAtUtc;00:11:52.3064966;06:12:25.9543680;06:00:33.6478714;False;232;0;0;00:00:00;01:05:56.9020767;01:05:56.9020767;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:03.4423249;00:00:00;02:00:00;00:11:52.3064966;00:58:07.7055465;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:24.0037679 [PrintingService.cs@1918] -06/15/2026 22:28:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=112.33333333333333,printChamber1=112.33333333333333,printChamber2=112.33333333333333,printChamber3=112.33333333333333,printChamber4=112.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:28:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 112.333336 with temperature 107.25 [HeaterCheck.cs@88] -06/15/2026 22:28:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=133.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:28:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9999495. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3876774. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:28:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:28:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:28:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 133.93844833374024. Used = 133.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:28:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 112.333336 with temperature 108.25 [HeaterCheck.cs@67] -06/15/2026 22:28:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 112.333336 with temperature 107.5 [HeaterCheck.cs@67] -06/15/2026 22:28:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351532, estimate=49.321840531339994 for layer 17, Z=1.7010001 [PrintingService.cs@1524] -06/15/2026 22:28:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 17, island count 7 [PrintingService.cs@1569] -06/15/2026 22:28:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 18, start=0, count=232, Z=1.8010001 [PrintingService.cs@1518] -06/15/2026 22:28:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:28:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 112.333336 with temperature 107.5 [HeaterCheck.cs@67] -06/15/2026 22:28:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:28:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 112.333336 with temperature 108.25 [HeaterCheck.cs@67] -06/15/2026 22:28:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 112.333336 with temperature 107.5 [HeaterCheck.cs@67] -06/15/2026 22:29:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 112.333336 with temperature 107.75 [HeaterCheck.cs@67] -06/15/2026 22:29:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 719.8044102, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.2210262128731446, Elapsed = 00:11:59.8163784, TimeTotal = 06:12:27.4237969, Remaining = 06:00:27.6074185, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.3715805, WeightTotalEstimate = 01:05:58.3715805, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.9118287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:59.8163784, HeatingEstimate = 00:58:00.1955898, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.4732717, WeightEstimate = 01:05:58.3715805 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:29:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2210262128731446;StartedAtUtc;00:11:59.8163784;06:12:27.4237969;06:00:27.6074185;False;232;0;0;00:00:00;01:05:58.3715805;01:05:58.3715805;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.9118287;00:00:00;02:00:00;00:11:59.8163784;00:58:00.1955898;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.4732717 [PrintingService.cs@1918] -06/15/2026 22:29:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=113.33333333333333,printChamber1=113.33333333333333,printChamber2=113.33333333333333,printChamber3=113.33333333333333,printChamber4=113.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:29:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=134.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 134.93844833374024. Used = 134.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:29:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:29:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 727.3057933, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.2545932823116486, Elapsed = 00:12:07.3177534, TimeTotal = 06:12:27.4237888, Remaining = 06:00:20.1060354, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.3715805, WeightTotalEstimate = 01:05:58.3715805, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.9118287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:12:07.3177534, HeatingEstimate = 00:57:52.6942067, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.4732717, WeightEstimate = 01:05:58.3715805 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:29:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2545932823116486;StartedAtUtc;00:12:07.3177534;06:12:27.4237888;06:00:20.1060354;False;232;0;0;00:00:00;01:05:58.3715805;01:05:58.3715805;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.9118287;00:00:00;02:00:00;00:12:07.3177534;00:57:52.6942067;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.4732717 [PrintingService.cs@1918] -06/15/2026 22:29:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=114.33333333333333,printChamber1=114.33333333333333,printChamber2=114.33333333333333,printChamber3=114.33333333333333,printChamber4=114.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:29:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=135.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 135.93844833374024. Used = 135.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=135.70814514160156, Elapsed=00:00:27.1988762 [ControlledHeating.cs@486] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 135.81094360351562 after 00:00:30.2054125 [ControlledHeating.cs@493] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2989275. SinceCollect=00:01:00.7047350. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2190, gen1=206, gen2=33, LatencyMode=Interactive, FreeMemory=5974360064, Live=441395040, HeapSizeBytes=445997680, FragmentedBytes=5089672, TotalCommittedBytes=453951488, PinnedObjectsCount=25, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631402. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0628627. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0755429. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:29:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 105467404887 (105467404887 @ 0) for mcu = 864.304739 [15/06/2026 21:17:31] (878.895040725 sec) to 107915918518 (from now=107795918518, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 105467404887 (105467404887 @ 0) for mcu = 864.304739 [15/06/2026 21:17:31] (878.895040725 sec) to 107915918518 (from external timestamp, flags=None, requested=107915918518 (107915918518 @ 0) for mcu = 884.709425 [15/06/2026 21:17:51] (899.2993209833334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 105467404887 (105467404887 @ 0) for mcu = 864.304739 [15/06/2026 21:17:31] (878.895040725 sec) to 107915918518 (from external timestamp, flags=None, requested=107915918518 (107915918518 @ 0) for mcu = 884.709425 [15/06/2026 21:17:51] (899.2993209833334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:29:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=104 that are outside of set tolerance 10 for current step target 114.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:29:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=136.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 136.93844833374024. Used = 136.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 47 [HeaterCheck.cs@67] -06/15/2026 22:29:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 739.8147483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.310568210509558, Elapsed = 00:12:19.8267078, TimeTotal = 06:12:27.4237882, Remaining = 06:00:07.5970804, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.3715805, WeightTotalEstimate = 01:05:58.3715805, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.9118287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:12:19.8267078, HeatingEstimate = 00:57:40.1852517, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.4732717, WeightEstimate = 01:05:58.3715805 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:29:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.310568210509558;StartedAtUtc;00:12:19.8267078;06:12:27.4237882;06:00:07.5970804;False;232;0;0;00:00:00;01:05:58.3715805;01:05:58.3715805;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.9118287;00:00:00;02:00:00;00:12:19.8267078;00:57:40.1852517;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.4732717 [PrintingService.cs@1918] -06/15/2026 22:29:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=115.33333333333333,printChamber1=115.33333333333333,printChamber2=115.33333333333333,printChamber3=115.33333333333333,printChamber4=115.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:29:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 51.333332 with temperature 40.25 [HeaterCheck.cs@111] -06/15/2026 22:29:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=137.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 137.93844833374024. Used = 137.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9795108. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1832826. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:29:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:29:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:29:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.75 [HeaterCheck.cs@67] -06/15/2026 22:29:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=104.75 that are outside of set tolerance 10 for current step target 115.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:29:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=138.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 138.93844833374024. Used = 138.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 115.333336 with temperature 110.35713958740234 [HeaterCheck.cs@67] -06/15/2026 22:29:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:29:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 751.3171654, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.362040412324367, Elapsed = 00:12:31.3294291, TimeTotal = 06:12:27.4240924, Remaining = 05:59:56.0946633, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:05:58.3715805, WeightTotalEstimate = 01:05:58.3715805, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:04.9118287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:12:31.3294291, HeatingEstimate = 00:57:28.6828346, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:25.4732717, WeightEstimate = 01:05:58.3715805 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:29:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.362040412324367;StartedAtUtc;00:12:31.3294291;06:12:27.4240924;05:59:56.0946633;False;232;0;0;00:00:00;01:05:58.3715805;01:05:58.3715805;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:04.9118287;00:00:00;02:00:00;00:12:31.3294291;00:57:28.6828346;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:25.4732717 [PrintingService.cs@1918] -06/15/2026 22:29:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=116.33333333333333,printChamber1=116.33333333333333,printChamber2=116.33333333333333,printChamber3=116.33333333333333,printChamber4=116.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:29:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262847, estimate=49.30925859569681 for layer 18, Z=1.8010001 [PrintingService.cs@1524] -06/15/2026 22:29:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 18, island count 7 [PrintingService.cs@1569] -06/15/2026 22:29:33 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 19, start=0, count=232, Z=1.901 [PrintingService.cs@1518] -06/15/2026 22:29:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:29:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=139.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 139.93844833374024. Used = 139.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:29:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=105.5 that are outside of set tolerance 10 for current step target 116.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:29:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=138.18905639648438, Elapsed=00:00:27.5099076 [ControlledHeating.cs@486] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 138.87156677246094 after 00:00:30.5110580 [ControlledHeating.cs@493] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2156420. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633902. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2822508. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2956333. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:29:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 109127439746 (109127439746 @ 0) for mcu = 894.805568 [15/06/2026 21:18:01] (909.3953312166667 sec) to 111542281778 (from now=111422281778, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 109127439746 (109127439746 @ 0) for mcu = 894.805568 [15/06/2026 21:18:01] (909.3953312166667 sec) to 111542281778 (from external timestamp, flags=None, requested=111542281778 (111542281778 @ 0) for mcu = 914.929629 [15/06/2026 21:18:21] (929.5190148166666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 109127439746 (109127439746 @ 0) for mcu = 894.805568 [15/06/2026 21:18:01] (909.3953312166667 sec) to 111542281778 (from external timestamp, flags=None, requested=111542281778 (111542281778 @ 0) for mcu = 914.929629 [15/06/2026 21:18:21] (929.5190148166666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:29:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:29:44 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:29:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/15/2026 22:29:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:29:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 22:29:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/15/2026 22:29:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/15/2026 22:29:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0825424 ~ 5.99 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:29:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=140.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 140.93844833374024. Used = 140.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:29:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:29:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:29:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 51.333332 with temperature 40.5 [HeaterCheck.cs@111] -06/15/2026 22:29:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:29:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 51.333332 with temperature 46.5 [HeaterCheck.cs@67] -06/15/2026 22:29:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=141.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:29:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 141.93844833374024. Used = 141.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:29:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:29:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9888163. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4057734. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:29:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:29:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:29:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:29:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=52.33333333333333,powderChamber1=52.33333333333333,powderChamber2=52.33333333333333,powderChamber3=52.33333333333333,powderChamber4=52.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:29:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:29:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 116.333336 with temperature 111.75 [HeaterCheck.cs@67] -06/15/2026 22:30:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=142.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 142.93844833374024. Used = 142.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=42,powderChamber4=41.5 that are outside of set tolerance 10 for current step target 52.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:30:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 116.333336 with temperature 112.75 [HeaterCheck.cs@67] -06/15/2026 22:30:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 116.333336 with temperature 107.5 [HeaterCheck.cs@111] -06/15/2026 22:30:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 116.333336 with temperature 112 [HeaterCheck.cs@67] -06/15/2026 22:30:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=143.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 143.93844833374024. Used = 143.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 116.333336 with temperature 111.75 [HeaterCheck.cs@67] -06/15/2026 22:30:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=143.63409423828125, Elapsed=00:00:27.2095995 [ControlledHeating.cs@486] -06/15/2026 22:30:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351655, estimate=49.201767182732006 for layer 19, Z=1.901 [PrintingService.cs@1524] -06/15/2026 22:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 19, island count 7 [PrintingService.cs@1569] -06/15/2026 22:30:12 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 20, start=0, count=232, Z=2.001 [PrintingService.cs@1518] -06/15/2026 22:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:30:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (202 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:30:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:30:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 143.65301513671875 after 00:00:30.2090745 [ControlledHeating.cs@493] -06/15/2026 22:30:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2915219. SinceCollect=00:01:00.7161069. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2300, gen1=214, gen2=34, LatencyMode=Interactive, FreeMemory=5969297408, Live=441306512, HeapSizeBytes=446756448, FragmentedBytes=5840688, TotalCommittedBytes=455786496, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632925. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0635495. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0747698. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:30:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 112753803006 (112753803006 @ 0) for mcu = 925.025818 [15/06/2026 21:18:32] (939.61502505 sec) to 115201656003 (from now=115081656003, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 112753803006 (112753803006 @ 0) for mcu = 925.025818 [15/06/2026 21:18:32] (939.61502505 sec) to 115201656003 (from external timestamp, flags=None, requested=115201656003 (115201656003 @ 0) for mcu = 945.424965 [15/06/2026 21:18:52] (960.013800025 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 112753803006 (112753803006 @ 0) for mcu = 925.025818 [15/06/2026 21:18:32] (939.61502505 sec) to 115201656003 (from external timestamp, flags=None, requested=115201656003 (115201656003 @ 0) for mcu = 945.424965 [15/06/2026 21:18:52] (960.013800025 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:30:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48.25 [HeaterCheck.cs@67] -06/15/2026 22:30:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=144.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 144.93844833374024. Used = 144.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=145.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 145.93844833374024. Used = 145.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1807326. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:30:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:30:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:30:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.42856979370117 [HeaterCheck.cs@67] -06/15/2026 22:30:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.35714340209961 [HeaterCheck.cs@67] -06/15/2026 22:30:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.57143020629883 [HeaterCheck.cs@67] -06/15/2026 22:30:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=146.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 146.93844833374024. Used = 146.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.60714340209961 [HeaterCheck.cs@67] -06/15/2026 22:30:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 116.333336 with temperature 99.67857360839844 [HeaterCheck.cs@111] -06/15/2026 22:30:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 49.25 [HeaterCheck.cs@67] -06/15/2026 22:30:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.39285659790039 [HeaterCheck.cs@67] -06/15/2026 22:30:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.42856979370117 [HeaterCheck.cs@67] -06/15/2026 22:30:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=147.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 147.93844833374024. Used = 147.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.42856979370117 [HeaterCheck.cs@67] -06/15/2026 22:30:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=148.04190063476562, Elapsed=00:00:27.4857967 [ControlledHeating.cs@486] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.53571319580078 [HeaterCheck.cs@67] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 147.75079345703125 after 00:00:30.4849679 [ControlledHeating.cs@493] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1911056. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634575. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2554991. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2680001. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:30:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 116413177231 (116413177231 @ 0) for mcu = 955.521281 [15/06/2026 21:19:02] (970.1098102583334 sec) to 118824757581 (from now=118704757581, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 116413177231 (116413177231 @ 0) for mcu = 955.521281 [15/06/2026 21:19:02] (970.1098102583334 sec) to 118824757581 (from external timestamp, flags=None, requested=118824757581 (118824757581 @ 0) for mcu = 975.618193 [15/06/2026 21:19:22] (990.206313175 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 116413177231 (116413177231 @ 0) for mcu = 955.521281 [15/06/2026 21:19:02] (970.1098102583334 sec) to 118824757581 (from external timestamp, flags=None, requested=118824757581 (118824757581 @ 0) for mcu = 975.618193 [15/06/2026 21:19:22] (990.206313175 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:30:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.35714340209961 [HeaterCheck.cs@67] -06/15/2026 22:30:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.333332 with temperature 47.60714340209961 [HeaterCheck.cs@67] -06/15/2026 22:30:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 112 [HeaterCheck.cs@67] -06/15/2026 22:30:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:30:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 112.25 [HeaterCheck.cs@67] -06/15/2026 22:30:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0591130 ~ 5.99 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:30:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=148.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 148.93844833374024. Used = 148.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262851, estimate=49.379037497063315 for layer 20, Z=2.001 [PrintingService.cs@1524] -06/15/2026 22:30:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 20, island count 7 [PrintingService.cs@1569] -06/15/2026 22:30:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 21, start=0, count=232, Z=2.101 [PrintingService.cs@1518] -06/15/2026 22:30:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:30:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48.25 [HeaterCheck.cs@67] -06/15/2026 22:30:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 111.75 [HeaterCheck.cs@67] -06/15/2026 22:30:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 111.5 [HeaterCheck.cs@67] -06/15/2026 22:30:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 52.333332 with temperature 40 [HeaterCheck.cs@111] -06/15/2026 22:30:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 116.333336 with temperature 112.25 [HeaterCheck.cs@67] -06/15/2026 22:30:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=149.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:30:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 149.93844833374024. Used = 149.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:30:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9936273. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3821855. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:30:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:30:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:30:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:31:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=150.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 150.93844833374024. Used = 150.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 842.8548486, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.7662544048599895, Elapsed = 00:14:02.8668086, TimeTotal = 06:12:59.4443496, Remaining = 05:58:56.5775410, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:30.3921414, WeightTotalEstimate = 01:06:30.3921414, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:36.9323896, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:02.8668086, HeatingEstimate = 00:55:57.1451514, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:57.4938326, WeightEstimate = 01:06:30.3921414 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:30:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.7662544048599895;StartedAtUtc;00:14:02.8668086;06:12:59.4443496;05:58:56.5775410;False;232;0;0;00:00:00;01:06:30.3921414;01:06:30.3921414;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:36.9323896;00:00:00;02:00:00;00:14:02.8668086;00:55:57.1451514;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:57.4938326 [PrintingService.cs@1918] -06/15/2026 22:31:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=117.33333333333333,printChamber1=117.33333333333333,printChamber2=117.33333333333333,printChamber3=117.33333333333333,printChamber4=117.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:31:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 117.333336 with temperature 112.25 [HeaterCheck.cs@88] -06/15/2026 22:31:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 117.333336 with temperature 112.5 [HeaterCheck.cs@67] -06/15/2026 22:31:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 117.333336 with temperature 113 [HeaterCheck.cs@67] -06/15/2026 22:31:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=151.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 151.93844833374024. Used = 151.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=151.5975799560547, Elapsed=00:00:27.2236749 [ControlledHeating.cs@486] -06/15/2026 22:31:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=106.75,printChamber1=107.25 that are outside of set tolerance 10 for current step target 117.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:31:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (336 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:31:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 151.62985229492188 after 00:00:30.2251581 [ControlledHeating.cs@493] -06/15/2026 22:31:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:31:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2854178. SinceCollect=00:01:00.7019695. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:31:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2411, gen1=224, gen2=35, LatencyMode=Interactive, FreeMemory=5937856512, Live=441099864, HeapSizeBytes=446462312, FragmentedBytes=5682456, TotalCommittedBytes=454819840, PinnedObjectsCount=25, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:31:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632246. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0663373. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0783742. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:31:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 120036278809 (120036278809 @ 0) for mcu = 985.714351 [15/06/2026 21:19:32] (1000.3023234083333 sec) to 122486304036 (from now=122366304036, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 120036278809 (120036278809 @ 0) for mcu = 985.714351 [15/06/2026 21:19:32] (1000.3023234083333 sec) to 122486304036 (from external timestamp, flags=None, requested=122486304036 (122486304036 @ 0) for mcu = 1006.131628 [15/06/2026 21:19:53] (1020.7192003 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 120036278809 (120036278809 @ 0) for mcu = 985.714351 [15/06/2026 21:19:32] (1000.3023234083333 sec) to 122486304036 (from external timestamp, flags=None, requested=122486304036 (122486304036 @ 0) for mcu = 1006.131628 [15/06/2026 21:19:53] (1020.7192003 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:31:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=152.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 152.93844833374024. Used = 152.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 117.333336 with temperature 112.35713958740234 [HeaterCheck.cs@67] -06/15/2026 22:31:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 117.333336 with temperature 112.35713958740234 [HeaterCheck.cs@67] -06/15/2026 22:31:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 117.333336 with temperature 112.35713958740234 [HeaterCheck.cs@67] -06/15/2026 22:31:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:31:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:31:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=153.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 153.93844833374024. Used = 153.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1765713. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:31:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:31:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:31:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 117.333336 with temperature 106.5 [HeaterCheck.cs@111] -06/15/2026 22:31:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351502, estimate=49.387685848558455 for layer 21, Z=2.101 [PrintingService.cs@1524] -06/15/2026 22:31:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 21, island count 7 [PrintingService.cs@1569] -06/15/2026 22:31:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 22, start=0, count=232, Z=2.201 [PrintingService.cs@1518] -06/15/2026 22:31:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:31:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=154.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 154.93844833374024. Used = 154.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:31:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.333336 with temperature 112.5 [HeaterCheck.cs@67] -06/15/2026 22:31:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.333336 with temperature 114 [HeaterCheck.cs@67] -06/15/2026 22:31:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:31:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=155.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 155.93844833374024. Used = 155.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:31:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 52.333332 with temperature 42.25 [HeaterCheck.cs@111] -06/15/2026 22:31:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:31:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=155.89596557617188, Elapsed=00:00:27.4785619 [ControlledHeating.cs@486] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 155.9758758544922 after 00:00:30.4785472 [ControlledHeating.cs@493] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1933815. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633269. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2592220. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2729735. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:31:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 123697825264 (123697825264 @ 0) for mcu = 1016.227836 [15/06/2026 21:20:03] (1030.8152105333334 sec) to 126109630462 (from now=125989630462, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 123697825264 (123697825264 @ 0) for mcu = 1016.227836 [15/06/2026 21:20:03] (1030.8152105333334 sec) to 126109630462 (from external timestamp, flags=None, requested=126109630462 (126109630462 @ 0) for mcu = 1036.326607 [15/06/2026 21:20:23] (1050.9135871833332 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 123697825264 (123697825264 @ 0) for mcu = 1016.227836 [15/06/2026 21:20:03] (1030.8152105333334 sec) to 126109630462 (from external timestamp, flags=None, requested=126109630462 (126109630462 @ 0) for mcu = 1036.326607 [15/06/2026 21:20:23] (1050.9135871833332 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:31:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:31:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1659247 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:31:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=156.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 156.93844833374024. Used = 156.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 885.3747965, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.955976014205305, Elapsed = 00:14:45.3867584, TimeTotal = 06:13:00.9941016, Remaining = 05:58:15.6073432, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:31.9418915, WeightTotalEstimate = 01:06:31.9418915, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:38.4821397, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:45.3867584, HeatingEstimate = 00:55:14.6252035, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:59.0435827, WeightEstimate = 01:06:31.9418915 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:30:02. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:31:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.955976014205305;StartedAtUtc;00:14:45.3867584;06:13:00.9941016;05:58:15.6073432;False;232;0;0;00:00:00;01:06:31.9418915;01:06:31.9418915;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:38.4821397;00:00:00;02:00:00;00:14:45.3867584;00:55:14.6252035;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:59.0435827 [PrintingService.cs@1918] -06/15/2026 22:31:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=118.33333333333333,printChamber1=118.33333333333333,printChamber2=118.33333333333333,printChamber3=118.33333333333333,printChamber4=118.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:31:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:31:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:31:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=157.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:31:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 157.93844833374024. Used = 157.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:31:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:31:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=107.5 that are outside of set tolerance 10 for current step target 118.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 893.8746333, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 3.993953961644784, Elapsed = 00:14:53.8866008, TimeTotal = 06:13:00.9941072, Remaining = 05:58:07.1075064, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:31.9418915, WeightTotalEstimate = 01:06:31.9418915, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:38.4821397, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:53.8866008, HeatingEstimate = 00:55:06.1253667, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:59.0435827, WeightEstimate = 01:06:31.9418915 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:30:02. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.993953961644784;StartedAtUtc;00:14:53.8866008;06:13:00.9941072;05:58:07.1075064;False;232;0;0;00:00:00;01:06:31.9418915;01:06:31.9418915;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:38.4821397;00:00:00;02:00:00;00:14:53.8866008;00:55:06.1253667;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:59.0435827 [PrintingService.cs@1918] -06/15/2026 22:31:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=119.33333333333333,printChamber1=119.33333333333333,printChamber2=119.33333333333333,printChamber3=119.33333333333333,printChamber4=119.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:31:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:31:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3736148. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:31:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:31:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:32:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 49 [HeaterCheck.cs@67] -06/15/2026 22:32:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:32:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=158.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 158.93844833374024. Used = 158.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 901.3770324, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.027475249111103, Elapsed = 00:15:01.3889981, TimeTotal = 06:13:00.9941054, Remaining = 05:57:59.6051073, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:31.9418915, WeightTotalEstimate = 01:06:31.9418915, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:02:38.4821397, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:01.3889981, HeatingEstimate = 00:54:58.6229676, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:17:59.0435827, WeightEstimate = 01:06:31.9418915 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:30:02. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:32:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.027475249111103;StartedAtUtc;00:15:01.3889981;06:13:00.9941054;05:57:59.6051073;False;232;0;0;00:00:00;01:06:31.9418915;01:06:31.9418915;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:02:38.4821397;00:00:00;02:00:00;00:15:01.3889981;00:54:58.6229676;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:17:59.0435827 [PrintingService.cs@1918] -06/15/2026 22:32:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=120.33333333333333,printChamber1=120.33333333333333,printChamber2=120.33333333333333,printChamber3=120.33333333333333,printChamber4=120.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:32:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 120.333336 with temperature 115 [HeaterCheck.cs@88] -06/15/2026 22:32:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 120.333336 with temperature 116 [HeaterCheck.cs@67] -06/15/2026 22:32:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:32:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 120.333336 with temperature 115.5 [HeaterCheck.cs@67] -06/15/2026 22:32:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 120.333336 with temperature 115.5 [HeaterCheck.cs@67] -06/15/2026 22:32:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:32:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 120.333336 with temperature 115.5 [HeaterCheck.cs@67] -06/15/2026 22:32:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262858, estimate=49.728250344821774 for layer 22, Z=2.201 [PrintingService.cs@1524] -06/15/2026 22:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 22, island count 7 [PrintingService.cs@1569] -06/15/2026 22:32:07 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 23, start=0, count=232, Z=2.3009999 [PrintingService.cs@1518] -06/15/2026 22:32:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:32:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 120.333336 with temperature 115.75 [HeaterCheck.cs@67] -06/15/2026 22:32:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:32:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=159.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 159.93844833374024. Used = 159.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 120.333336 with temperature 115.75 [HeaterCheck.cs@67] -06/15/2026 22:32:10 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=110.25 that are outside of set tolerance 10 for current step target 120.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:32:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 909.8780594, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.060473621730801, Elapsed = 00:15:09.8900247, TimeTotal = 06:13:28.4702787, Remaining = 05:58:18.5802540, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:06:59.4180652, WeightTotalEstimate = 01:06:59.4180652, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:05.9583134, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:09.8900247, HeatingEstimate = 00:54:50.1219406, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:18:26.5197564, WeightEstimate = 01:06:59.4180652 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:30:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:32:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.060473621730801;StartedAtUtc;00:15:09.8900247;06:13:28.4702787;05:58:18.5802540;False;232;0;0;00:00:00;01:06:59.4180652;01:06:59.4180652;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:05.9583134;00:00:00;02:00:00;00:15:09.8900247;00:54:50.1219406;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:18:26.5197564 [PrintingService.cs@1918] -06/15/2026 22:32:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=121.33333333333333,printChamber1=121.33333333333333,printChamber2=121.33333333333333,printChamber3=121.33333333333333,printChamber4=121.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:32:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=158.6022491455078, Elapsed=00:00:27.1969304 [ControlledHeating.cs@486] -06/15/2026 22:32:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (363 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:32:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:32:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 158.53086853027344 after 00:00:30.1966344 [ControlledHeating.cs@493] -06/15/2026 22:32:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.8967388. SinceCollect=00:01:01.2899107. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2538, gen1=336, gen2=37, LatencyMode=Interactive, FreeMemory=6002786304, Live=441554176, HeapSizeBytes=442258624, FragmentedBytes=1118000, TotalCommittedBytes=443645952, PinnedObjectsCount=1, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634149. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0651751. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0779895. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:32:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 127321151690 (127321151690 @ 0) for mcu = 1046.422749 [15/06/2026 21:20:33] (1061.0095974166666 sec) to 129840928790 (from now=129720928790, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 127321151690 (127321151690 @ 0) for mcu = 1046.422749 [15/06/2026 21:20:33] (1061.0095974166666 sec) to 129840928790 (from external timestamp, flags=None, requested=129840928790 (129840928790 @ 0) for mcu = 1067.421283 [15/06/2026 21:20:54] (1082.0077399166667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 127321151690 (127321151690 @ 0) for mcu = 1046.422749 [15/06/2026 21:20:33] (1061.0095974166666 sec) to 129840928790 (from external timestamp, flags=None, requested=129840928790 (129840928790 @ 0) for mcu = 1067.421283 [15/06/2026 21:20:54] (1082.0077399166667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=160.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 160.93844833374024. Used = 160.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:18 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=110.75 that are outside of set tolerance 10 for current step target 121.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:32:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:32:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=161.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 161.93844833374024. Used = 161.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 52.333332 with temperature 40.75 [HeaterCheck.cs@111] -06/15/2026 22:32:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1824556. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:32:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:32:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:32:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=162.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 162.93844833374024. Used = 162.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:32:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=163.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 163.93844833374024. Used = 163.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:32:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:32:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=162.12728881835938, Elapsed=00:00:27.1027492 [ControlledHeating.cs@486] -06/15/2026 22:32:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 52.333332 with temperature 43.25 [HeaterCheck.cs@111] -06/15/2026 22:32:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 162.08262634277344 after 00:00:30.1017773 [ControlledHeating.cs@493] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.2054456. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625724. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.2726676. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.2910271. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:32:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 131052450018 (131052450018 @ 0) for mcu = 1077.517238 [15/06/2026 21:21:04] (1092.10375015 sec) to 133346505833 (from now=133226505833, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 131052450018 (131052450018 @ 0) for mcu = 1077.517238 [15/06/2026 21:21:04] (1092.10375015 sec) to 133346505833 (from external timestamp, flags=None, requested=133346505833 (133346505833 @ 0) for mcu = 1096.634654 [15/06/2026 21:21:23] (1111.2208819416667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 131052450018 (131052450018 @ 0) for mcu = 1077.517238 [15/06/2026 21:21:04] (1092.10375015 sec) to 133346505833 (from external timestamp, flags=None, requested=133346505833 (133346505833 @ 0) for mcu = 1096.634654 [15/06/2026 21:21:23] (1111.2208819416667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:32:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:32:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=164.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 164.93844833374024. Used = 164.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0918280 ~ 5.97 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:32:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 121.333336 with temperature 116.5 [HeaterCheck.cs@67] -06/15/2026 22:32:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:32:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351751, estimate=49.30900232492243 for layer 23, Z=2.3009999 [PrintingService.cs@1524] -06/15/2026 22:32:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 23, island count 7 [PrintingService.cs@1569] -06/15/2026 22:32:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 24, start=0, count=232, Z=2.401 [PrintingService.cs@1518] -06/15/2026 22:32:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:32:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:32:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=165.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:32:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 165.93844833374024. Used = 165.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:32:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:32:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9779308. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.3999561. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:32:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:32:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:32:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 121.333336 with temperature 106 [HeaterCheck.cs@111] -06/15/2026 22:32:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:32:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:33:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=166.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:33:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 166.93844833374024. Used = 166.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:33:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48.25 [HeaterCheck.cs@67] -06/15/2026 22:33:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:33:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48.25 [HeaterCheck.cs@67] -06/15/2026 22:33:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 121.333336 with temperature 109.75 [HeaterCheck.cs@111] -06/15/2026 22:33:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:33:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 52.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:33:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=167.93844833374024 [ControlledHeating.cs@169] -06/15/2026 22:33:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 167.93844833374024. Used = 167.93844833374024 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:33:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.2429656982422, Elapsed=00:00:27.2146779 [ControlledHeating.cs@486] -06/15/2026 22:33:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48 [HeaterCheck.cs@67] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.09559631347656 after 00:00:30.2155159 [ControlledHeating.cs@493] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.4220391. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632665. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.4867960. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.5006112. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:33:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 134558027061 (134558027061 @ 0) for mcu = 1106.730798 [15/06/2026 21:21:33] (1121.316892175 sec) to 136971455905 (from now=136851455905, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 134558027061 (134558027061 @ 0) for mcu = 1106.730798 [15/06/2026 21:21:33] (1121.316892175 sec) to 136971455905 (from external timestamp, flags=None, requested=136971455905 (136971455905 @ 0) for mcu = 1126.842993 [15/06/2026 21:21:53] (1141.4287992083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 134558027061 (134558027061 @ 0) for mcu = 1106.730798 [15/06/2026 21:21:33] (1121.316892175 sec) to 136971455905 (from external timestamp, flags=None, requested=136971455905 (136971455905 @ 0) for mcu = 1126.842993 [15/06/2026 21:21:53] (1141.4287992083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:33:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=168 [ControlledHeating.cs@169] -06/15/2026 22:33:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 168. Used = 168 [SoftAnalysisSurfaceHeater.cs@881] -06/15/2026 22:33:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.75 [HeaterCheck.cs@67] -06/15/2026 22:33:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48.25 [HeaterCheck.cs@67] -06/15/2026 22:33:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 121.333336 with temperature 116.46428680419922 [HeaterCheck.cs@67] -06/15/2026 22:33:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 48.25 [HeaterCheck.cs@67] -06/15/2026 22:33:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (217 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:33:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 984.3994903, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.392725627883676, Elapsed = 00:16:24.4114564, TimeTotal = 06:13:30.0374071, Remaining = 05:57:05.6259507, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:00.9851928, WeightTotalEstimate = 01:07:00.9851928, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:07.5254410, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:24.4114564, HeatingEstimate = 00:53:35.6005097, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:18:28.0868840, WeightEstimate = 01:07:00.9851928 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:30:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:33:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.392725627883676;StartedAtUtc;00:16:24.4114564;06:13:30.0374071;05:57:05.6259507;False;232;0;0;00:00:00;01:07:00.9851928;01:07:00.9851928;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:07.5254410;00:00:00;02:00:00;00:16:24.4114564;00:53:35.6005097;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:18:28.0868840 [PrintingService.cs@1918] -06/15/2026 22:33:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=122.33333333333333,printChamber1=122.33333333333333,printChamber2=122.33333333333333,printChamber3=122.33333333333333,printChamber4=122.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:33:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 52.333332 with temperature 47.5 [HeaterCheck.cs@67] -06/15/2026 22:33:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9945672. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:33:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 52.333332 with temperature 39.75 [HeaterCheck.cs@111] -06/15/2026 22:33:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9945672. Loops = 44. GC duration = 00:00:00.3790403. SinceCollect=00:01:10.9895405. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:33:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2675, gen1=406, gen2=38, LatencyMode=Interactive, FreeMemory=5820661760, Live=428300944, HeapSizeBytes=489639536, FragmentedBytes=61690000, TotalCommittedBytes=497254400, PinnedObjectsCount=25, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:33:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:33:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:33:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 122.333336 with temperature 117.75 [HeaterCheck.cs@67] -06/15/2026 22:33:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=53.33333333333333,powderChamber1=53.33333333333333,powderChamber2=53.33333333333333,powderChamber3=53.33333333333333,powderChamber4=53.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:33:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 53.333332 with temperature 47.5 [HeaterCheck.cs@88] -06/15/2026 22:33:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262872, estimate=49.487311700991015 for layer 24, Z=2.401 [PrintingService.cs@1524] -06/15/2026 22:33:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 24, island count 7 [PrintingService.cs@1569] -06/15/2026 22:33:31 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 25, start=0, count=232, Z=2.501 [PrintingService.cs@1518] -06/15/2026 22:33:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:33:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=111.5 that are outside of set tolerance 10 for current step target 122.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:33:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:33:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 992.8985248, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.423370067707659, Elapsed = 00:16:32.9105671, TimeTotal = 06:14:06.9251250, Remaining = 05:57:34.0145579, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:37.8728345, WeightTotalEstimate = 01:07:37.8728345, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:44.4130827, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:32.9105671, HeatingEstimate = 00:53:27.1014752, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:04.9745257, WeightEstimate = 01:07:37.8728345 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:33:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.423370067707659;StartedAtUtc;00:16:32.9105671;06:14:06.9251250;05:57:34.0145579;False;232;0;0;00:00:00;01:07:37.8728345;01:07:37.8728345;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:44.4130827;00:00:00;02:00:00;00:16:32.9105671;00:53:27.1014752;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:04.9745257 [PrintingService.cs@1918] -06/15/2026 22:33:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=123.33333333333333,printChamber1=123.33333333333333,printChamber2=123.33333333333333,printChamber3=123.33333333333333,printChamber4=123.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:33:35 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=42.5 that are outside of set tolerance 10 for current step target 53.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:33:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 123.333336 with temperature 118.75 [HeaterCheck.cs@67] -06/15/2026 22:33:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:33:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 123.333336 with temperature 118.5 [HeaterCheck.cs@67] -06/15/2026 22:33:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 123.333336 with temperature 118.5 [HeaterCheck.cs@67] -06/15/2026 22:33:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=113 that are outside of set tolerance 10 for current step target 123.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:33:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1001.4019772, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.461252680081084, Elapsed = 00:16:41.4140501, TimeTotal = 06:14:06.9251556, Remaining = 05:57:25.5111055, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:37.8728345, WeightTotalEstimate = 01:07:37.8728345, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:44.4130827, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:41.4140501, HeatingEstimate = 00:53:18.5980228, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:04.9745257, WeightEstimate = 01:07:37.8728345 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:33:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.461252680081084;StartedAtUtc;00:16:41.4140501;06:14:06.9251556;05:57:25.5111055;False;232;0;0;00:00:00;01:07:37.8728345;01:07:37.8728345;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:44.4130827;00:00:00;02:00:00;00:16:41.4140501;00:53:18.5980228;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:04.9745257 [PrintingService.cs@1918] -06/15/2026 22:33:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=124.33333333333333,printChamber1=124.33333333333333,printChamber2=124.33333333333333,printChamber3=124.33333333333333,printChamber4=124.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:33:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.05007934570312, Elapsed=00:00:27.5901572 [ControlledHeating.cs@486] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.20779418945312 after 00:00:30.5906967 [ControlledHeating.cs@493] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0230194. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631835. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0871028. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0996377. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:33:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 138182977133 (138182977133 @ 0) for mcu = 1136.939165 [15/06/2026 21:22:03] (1151.5248094416668 sec) to 140642032751 (from now=140522032751, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 138182977133 (138182977133 @ 0) for mcu = 1136.939165 [15/06/2026 21:22:03] (1151.5248094416668 sec) to 140642032751 (from external timestamp, flags=None, requested=140642032751 (140642032751 @ 0) for mcu = 1157.431589 [15/06/2026 21:22:24] (1172.0169395916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 138182977133 (138182977133 @ 0) for mcu = 1136.939165 [15/06/2026 21:22:03] (1151.5248094416668 sec) to 140642032751 (from external timestamp, flags=None, requested=140642032751 (140642032751 @ 0) for mcu = 1157.431589 [15/06/2026 21:22:24] (1172.0169395916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:33:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0543320 ~ 5.98 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:33:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:33:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1008.9021042, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.494664923936801, Elapsed = 00:16:48.9140665, TimeTotal = 06:14:06.9250450, Remaining = 05:57:18.0109785, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:37.8728345, WeightTotalEstimate = 01:07:37.8728345, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:44.4130827, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:48.9140665, HeatingEstimate = 00:53:11.0978958, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:04.9745257, WeightEstimate = 01:07:37.8728345 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:33:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.494664923936801;StartedAtUtc;00:16:48.9140665;06:14:06.9250450;05:57:18.0109785;False;232;0;0;00:00:00;01:07:37.8728345;01:07:37.8728345;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:44.4130827;00:00:00;02:00:00;00:16:48.9140665;00:53:11.0978958;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:04.9745257 [PrintingService.cs@1918] -06/15/2026 22:33:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=125.33333333333333,printChamber1=125.33333333333333,printChamber2=125.33333333333333,printChamber3=125.33333333333333,printChamber4=125.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:33:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9895301. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2055490. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:33:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:33:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:33:58 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=115.25 that are outside of set tolerance 10 for current step target 125.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:33:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1017.4024955, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.532533818058012, Elapsed = 00:16:57.4144693, TimeTotal = 06:14:06.9250565, Remaining = 05:57:09.5105872, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:37.8728345, WeightTotalEstimate = 01:07:37.8728345, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:44.4130827, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:57.4144693, HeatingEstimate = 00:53:02.5975045, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:04.9745257, WeightEstimate = 01:07:37.8728345 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:33:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.532533818058012;StartedAtUtc;00:16:57.4144693;06:14:06.9250565;05:57:09.5105872;False;232;0;0;00:00:00;01:07:37.8728345;01:07:37.8728345;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:44.4130827;00:00:00;02:00:00;00:16:57.4144693;00:53:02.5975045;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:04.9745257 [PrintingService.cs@1918] -06/15/2026 22:33:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=126.33333333333333,printChamber1=126.33333333333333,printChamber2=126.33333333333333,printChamber3=126.33333333333333,printChamber4=126.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:33:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 126.333336 with temperature 120.57142639160156 [HeaterCheck.cs@88] -06/15/2026 22:34:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=116.25 that are outside of set tolerance 10 for current step target 126.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:34:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1026.9029344, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 4.574857800420975, Elapsed = 00:17:06.9149016, TimeTotal = 06:14:06.9250499, Remaining = 05:57:00.0101483, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:07:37.8728345, WeightTotalEstimate = 01:07:37.8728345, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:03:44.4130827, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:17:06.9149016, HeatingEstimate = 00:52:53.0970656, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:04.9745257, WeightEstimate = 01:07:37.8728345 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:34:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.574857800420975;StartedAtUtc;00:17:06.9149016;06:14:06.9250499;05:57:00.0101483;False;232;0;0;00:00:00;01:07:37.8728345;01:07:37.8728345;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:03:44.4130827;00:00:00;02:00:00;00:17:06.9149016;00:52:53.0970656;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:04.9745257 [PrintingService.cs@1918] -06/15/2026 22:34:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=127.33333333333333,printChamber1=127.33333333333333,printChamber2=127.33333333333333,printChamber3=127.33333333333333,printChamber4=127.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:34:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49 [HeaterCheck.cs@67] -06/15/2026 22:34:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.3172607421875, Elapsed=00:00:27.2002871 [ControlledHeating.cs@486] -06/15/2026 22:34:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=116.5,printChamber3=116.75 that are outside of set tolerance 10 for current step target 127.33333333333333 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351764, estimate=49.332846357075915 for layer 25, Z=2.501 [PrintingService.cs@1524] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.47509765625 after 00:00:30.2000050 [ControlledHeating.cs@493] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2217567. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625964. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2861624. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2988273. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:34:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 141853553979 (141853553979 @ 0) for mcu = 1167.527738 [15/06/2026 21:22:34] (1182.112949825 sec) to 144265929794 (from now=144145929794, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 141853553979 (141853553979 @ 0) for mcu = 1167.527738 [15/06/2026 21:22:34] (1182.112949825 sec) to 144265929794 (from external timestamp, flags=None, requested=144265929794 (144265929794 @ 0) for mcu = 1187.631159 [15/06/2026 21:22:54] (1202.2160816166668 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 141853553979 (141853553979 @ 0) for mcu = 1167.527738 [15/06/2026 21:22:34] (1182.112949825 sec) to 144265929794 (from external timestamp, flags=None, requested=144265929794 (144265929794 @ 0) for mcu = 1187.631159 [15/06/2026 21:22:54] (1202.2160816166668 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 25, island count 7 [PrintingService.cs@1569] -06/15/2026 22:34:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 26, start=0, count=232, Z=2.601 [PrintingService.cs@1518] -06/15/2026 22:34:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:34:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 127.333336 with temperature 122.5 [HeaterCheck.cs@67] -06/15/2026 22:34:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 127.333336 with temperature 122.5 [HeaterCheck.cs@67] -06/15/2026 22:34:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 127.333336 with temperature 122.75 [HeaterCheck.cs@67] -06/15/2026 22:34:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 127.333336 with temperature 122.5 [HeaterCheck.cs@67] -06/15/2026 22:34:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.333336 with temperature 122.75 [HeaterCheck.cs@67] -06/15/2026 22:34:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.333336 with temperature 122.5 [HeaterCheck.cs@67] -06/15/2026 22:34:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 53.333332 with temperature 44.5 [HeaterCheck.cs@111] -06/15/2026 22:34:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (50 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:34:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:34:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2743376. SinceCollect=00:01:00.6752249. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:34:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2802, gen1=533, gen2=39, LatencyMode=Interactive, FreeMemory=5844320256, Live=441401112, HeapSizeBytes=469521896, FragmentedBytes=28483456, TotalCommittedBytes=477233152, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:34:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:34:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:34:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.333336 with temperature 123.5 [HeaterCheck.cs@67] -06/15/2026 22:34:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.333336 with temperature 123.75 [HeaterCheck.cs@67] -06/15/2026 22:34:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 50.25 [HeaterCheck.cs@67] -06/15/2026 22:34:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.69192504882812, Elapsed=00:00:27.4692054 [ControlledHeating.cs@486] -06/15/2026 22:34:44 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:34:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 22:34:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/15/2026 22:34:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:34:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/15/2026 22:34:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/15/2026 22:34:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 50.75 [HeaterCheck.cs@67] -06/15/2026 22:34:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.83502197265625 after 00:00:30.4740588 [ControlledHeating.cs@493] -06/15/2026 22:34:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0185033. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:34:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1054715 ~ 5.99 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632411. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0840968. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0934237. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:34:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 145477451022 (145477451022 @ 0) for mcu = 1197.727318 [15/06/2026 21:23:04] (1212.31209185 sec) to 147922230118 (from now=147802230118, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 145477451022 (145477451022 @ 0) for mcu = 1197.727318 [15/06/2026 21:23:04] (1212.31209185 sec) to 147922230118 (from external timestamp, flags=None, requested=147922230118 (147922230118 @ 0) for mcu = 1218.100769 [15/06/2026 21:23:25] (1232.6852509833334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 145477451022 (145477451022 @ 0) for mcu = 1197.727318 [15/06/2026 21:23:04] (1212.31209185 sec) to 147922230118 (from external timestamp, flags=None, requested=147922230118 (147922230118 @ 0) for mcu = 1218.100769 [15/06/2026 21:23:25] (1232.6852509833334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:34:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:34:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:34:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 127.333336 with temperature 112 [HeaterCheck.cs@111] -06/15/2026 22:34:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:34:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262870, estimate=49.53887860321218 for layer 26, Z=2.601 [PrintingService.cs@1524] -06/15/2026 22:34:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 26, island count 7 [PrintingService.cs@1569] -06/15/2026 22:34:53 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 27, start=0, count=232, Z=2.701 [PrintingService.cs@1518] -06/15/2026 22:34:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:34:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:34:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 53.333332 with temperature 48.60714340209961 [HeaterCheck.cs@67] -06/15/2026 22:34:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 53.333332 with temperature 48.39285659790039 [HeaterCheck.cs@67] -06/15/2026 22:34:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 53.333332 with temperature 48.35714340209961 [HeaterCheck.cs@67] -06/15/2026 22:34:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9940230. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1991024. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:34:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:34:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:34:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 127.333336 with temperature 112.75 [HeaterCheck.cs@111] -06/15/2026 22:35:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 127.333336 with temperature 113.5 [HeaterCheck.cs@111] -06/15/2026 22:35:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 53.333332 with temperature 39.75 [HeaterCheck.cs@111] -06/15/2026 22:35:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.1480712890625, Elapsed=00:00:27.1940398 [ControlledHeating.cs@486] -06/15/2026 22:35:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.5753631591797 after 00:00:30.1946410 [ControlledHeating.cs@493] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2155051. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631796. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2810407. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2975095. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:35:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 149133751346 (149133751346 @ 0) for mcu = 1228.196959 [15/06/2026 21:23:35] (1242.7812612166667 sec) to 151546662655 (from now=151426662655, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 149133751346 (149133751346 @ 0) for mcu = 1228.196959 [15/06/2026 21:23:35] (1242.7812612166667 sec) to 151546662655 (from external timestamp, flags=None, requested=151546662655 (151546662655 @ 0) for mcu = 1248.304856 [15/06/2026 21:23:55] (1262.8888554583334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 149133751346 (149133751346 @ 0) for mcu = 1228.196959 [15/06/2026 21:23:35] (1242.7812612166667 sec) to 151546662655 (from external timestamp, flags=None, requested=151546662655 (151546662655 @ 0) for mcu = 1248.304856 [15/06/2026 21:23:55] (1262.8888554583334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49.25 [HeaterCheck.cs@67] -06/15/2026 22:35:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49 [HeaterCheck.cs@67] -06/15/2026 22:35:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:35:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49 [HeaterCheck.cs@67] -06/15/2026 22:35:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49 [HeaterCheck.cs@67] -06/15/2026 22:35:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2922911. SinceCollect=00:01:00.6897428. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:35:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2917, gen1=576, gen2=40, LatencyMode=Interactive, FreeMemory=5939331072, Live=441359904, HeapSizeBytes=469128168, FragmentedBytes=28118592, TotalCommittedBytes=478199808, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:35:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:35:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:35:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (381 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:35:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 53.333332 with temperature 45.75 [HeaterCheck.cs@111] -06/15/2026 22:35:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 127.333336 with temperature 122.5 [HeaterCheck.cs@67] -06/15/2026 22:35:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:35:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 127.333336 with temperature 122.5 [HeaterCheck.cs@67] -06/15/2026 22:35:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49 [HeaterCheck.cs@67] -06/15/2026 22:35:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351767, estimate=49.200012384751794 for layer 27, Z=2.701 [PrintingService.cs@1524] -06/15/2026 22:35:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 27, island count 7 [PrintingService.cs@1569] -06/15/2026 22:35:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 28, start=0, count=232, Z=2.8009999 [PrintingService.cs@1518] -06/15/2026 22:35:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:35:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.47715759277344, Elapsed=00:00:27.4968839 [ControlledHeating.cs@486] -06/15/2026 22:35:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0553192 ~ 5.94 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.3880615234375 after 00:00:30.4977841 [ControlledHeating.cs@493] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0249441. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634223. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0885936. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1047741. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:35:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 152758183883 (152758183883 @ 0) for mcu = 1258.401092 [15/06/2026 21:24:05] (1272.9848656916668 sec) to 155206232449 (from now=155086232449, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 152758183883 (152758183883 @ 0) for mcu = 1258.401092 [15/06/2026 21:24:05] (1272.9848656916668 sec) to 155206232449 (from external timestamp, flags=None, requested=155206232449 (155206232449 @ 0) for mcu = 1278.801825 [15/06/2026 21:24:25] (1293.3852704083333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 152758183883 (152758183883 @ 0) for mcu = 1258.401092 [15/06/2026 21:24:05] (1272.9848656916668 sec) to 155206232449 (from external timestamp, flags=None, requested=155206232449 (155206232449 @ 0) for mcu = 1278.801825 [15/06/2026 21:24:25] (1293.3852704083333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:35:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:35:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 127.333336 with temperature 122.53571319580078 [HeaterCheck.cs@67] -06/15/2026 22:35:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 48.75 [HeaterCheck.cs@67] -06/15/2026 22:35:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1136.4343431, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.055252243886805, Elapsed = 00:18:56.4463108, TimeTotal = 06:14:40.5065301, Remaining = 05:55:44.0602193, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:11.4543142, WeightTotalEstimate = 01:08:11.4543142, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:17.9945624, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:56.4463108, HeatingEstimate = 00:51:03.5656569, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:38.5560054, WeightEstimate = 01:08:11.4543142 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:42. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:35:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.055252243886805;StartedAtUtc;00:18:56.4463108;06:14:40.5065301;05:55:44.0602193;False;232;0;0;00:00:00;01:08:11.4543142;01:08:11.4543142;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:17.9945624;00:00:00;02:00:00;00:18:56.4463108;00:51:03.5656569;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:38.5560054 [PrintingService.cs@1918] -06/15/2026 22:35:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=128.33333333333331,printChamber1=128.33333333333331,printChamber2=128.33333333333331,printChamber3=128.33333333333331,printChamber4=128.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:35:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 128.33333 with temperature 123.25 [HeaterCheck.cs@88] -06/15/2026 22:35:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 128.33333 with temperature 123 [HeaterCheck.cs@88] -06/15/2026 22:35:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9930963. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2154589. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:35:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:35:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:35:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 128.33333 with temperature 123.5 [HeaterCheck.cs@67] -06/15/2026 22:35:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 128.33333 with temperature 123.5 [HeaterCheck.cs@67] -06/15/2026 22:36:05 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=117.5 that are outside of set tolerance 10 for current step target 128.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:36:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1144.9357045, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.0930688306693765, Elapsed = 00:19:04.9476710, TimeTotal = 06:14:40.5065289, Remaining = 05:55:35.5588579, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:11.4543142, WeightTotalEstimate = 01:08:11.4543142, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:17.9945624, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:04.9476710, HeatingEstimate = 00:50:55.0642955, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:38.5560054, WeightEstimate = 01:08:11.4543142 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:42. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:36:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.0930688306693765;StartedAtUtc;00:19:04.9476710;06:14:40.5065289;05:55:35.5588579;False;232;0;0;00:00:00;01:08:11.4543142;01:08:11.4543142;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:17.9945624;00:00:00;02:00:00;00:19:04.9476710;00:50:55.0642955;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:38.5560054 [PrintingService.cs@1918] -06/15/2026 22:36:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=129.33333333333331,printChamber1=129.33333333333331,printChamber2=129.33333333333331,printChamber3=129.33333333333331,printChamber4=129.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:36:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.333332 with temperature 48.5 [HeaterCheck.cs@67] -06/15/2026 22:36:14 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=118.75 that are outside of set tolerance 10 for current step target 129.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:36:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.46237182617188, Elapsed=00:00:27.2122733 [ControlledHeating.cs@486] -06/15/2026 22:36:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1153.4357639, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.130879638431723, Elapsed = 00:19:13.4477322, TimeTotal = 06:14:40.5065307, Remaining = 05:55:27.0587985, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:11.4543142, WeightTotalEstimate = 01:08:11.4543142, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:17.9945624, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:13.4477322, HeatingEstimate = 00:50:46.5642361, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:38.5560054, WeightEstimate = 01:08:11.4543142 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:42. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:36:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.130879638431723;StartedAtUtc;00:19:13.4477322;06:14:40.5065307;05:55:27.0587985;False;232;0;0;00:00:00;01:08:11.4543142;01:08:11.4543142;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:17.9945624;00:00:00;02:00:00;00:19:13.4477322;00:50:46.5642361;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:38.5560054 [PrintingService.cs@1918] -06/15/2026 22:36:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=130.33333333333331,printChamber1=130.33333333333331,printChamber2=130.33333333333331,printChamber3=130.33333333333331,printChamber4=130.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.50662231445312 after 00:00:30.2105237 [ControlledHeating.cs@493] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2319260. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49.75 [HeaterCheck.cs@67] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634435. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2983000. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3093788. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:36:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 156417753677 (156417753677 @ 0) for mcu = 1288.897995 [15/06/2026 21:24:35] (1303.4812806416667 sec) to 158830732100 (from now=158710732100, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 156417753677 (156417753677 @ 0) for mcu = 1288.897995 [15/06/2026 21:24:35] (1303.4812806416667 sec) to 158830732100 (from external timestamp, flags=None, requested=158830732100 (158830732100 @ 0) for mcu = 1309.006471 [15/06/2026 21:24:56] (1323.5894341666667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 156417753677 (156417753677 @ 0) for mcu = 1288.897995 [15/06/2026 21:24:35] (1303.4812806416667 sec) to 158830732100 (from external timestamp, flags=None, requested=158830732100 (158830732100 @ 0) for mcu = 1309.006471 [15/06/2026 21:24:56] (1323.5894341666667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:36:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49 [HeaterCheck.cs@67] -06/15/2026 22:36:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.333332 with temperature 49.25 [HeaterCheck.cs@67] -06/15/2026 22:36:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1160.9365652, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.164245435801829, Elapsed = 00:19:20.9485324, TimeTotal = 06:14:40.5065296, Remaining = 05:55:19.5579972, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:11.4543142, WeightTotalEstimate = 01:08:11.4543142, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:17.9945624, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:20.9485324, HeatingEstimate = 00:50:39.0634348, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:19:38.5560054, WeightEstimate = 01:08:11.4543142 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:31:42. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:36:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.164245435801829;StartedAtUtc;00:19:20.9485324;06:14:40.5065296;05:55:19.5579972;False;232;0;0;00:00:00;01:08:11.4543142;01:08:11.4543142;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:17.9945624;00:00:00;02:00:00;00:19:20.9485324;00:50:39.0634348;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:19:38.5560054 [PrintingService.cs@1918] -06/15/2026 22:36:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=131.33333333333331,printChamber1=131.33333333333331,printChamber2=131.33333333333331,printChamber3=131.33333333333331,printChamber4=131.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:36:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262845, estimate=49.235101996667545 for layer 28, Z=2.8009999 [PrintingService.cs@1524] -06/15/2026 22:36:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 28, island count 7 [PrintingService.cs@1569] -06/15/2026 22:36:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 29, start=0, count=232, Z=2.901 [PrintingService.cs@1518] -06/15/2026 22:36:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:36:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=54.33333333333333,powderChamber1=54.33333333333333,powderChamber2=54.33333333333333,powderChamber3=54.33333333333333,powderChamber4=54.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:36:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9940911. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:36:29 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (143 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:36:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 131.33333 with temperature 126.5 [HeaterCheck.cs@67] -06/15/2026 22:36:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9940911. Loops = 44. GC duration = 00:00:00.4141731. SinceCollect=00:01:00.8302414. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:36:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3029, gen1=587, gen2=41, LatencyMode=Interactive, FreeMemory=5938823168, Live=441288720, HeapSizeBytes=469111304, FragmentedBytes=28212864, TotalCommittedBytes=477249536, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:36:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:36:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:36:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=120.5,printChamber4=120.75 that are outside of set tolerance 10 for current step target 131.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:36:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=43.5 that are outside of set tolerance 10 for current step target 54.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:36:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 131.33333 with temperature 126.35713958740234 [HeaterCheck.cs@67] -06/15/2026 22:36:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 54.333332 with temperature 42 [HeaterCheck.cs@111] -06/15/2026 22:36:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.42361450195312, Elapsed=00:00:27.6199211 [ControlledHeating.cs@486] -06/15/2026 22:36:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0225920 ~ 5.98 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:36:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.75 [HeaterCheck.cs@67] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.53683471679688 after 00:00:30.6197555 [ControlledHeating.cs@493] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0276870. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632680. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0925449. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1016556. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:36:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 160042253328 (160042253328 @ 0) for mcu = 1319.102639 [15/06/2026 21:25:06] (1333.6854444 sec) to 162505370220 (from now=162385370220, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 160042253328 (160042253328 @ 0) for mcu = 1319.102639 [15/06/2026 21:25:06] (1333.6854444 sec) to 162505370220 (from external timestamp, flags=None, requested=162505370220 (162505370220 @ 0) for mcu = 1339.628941 [15/06/2026 21:25:26] (1354.2114185 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 160042253328 (160042253328 @ 0) for mcu = 1319.102639 [15/06/2026 21:25:06] (1333.6854444 sec) to 162505370220 (from external timestamp, flags=None, requested=162505370220 (162505370220 @ 0) for mcu = 1339.628941 [15/06/2026 21:25:26] (1354.2114185 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:36:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:36:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 50 [HeaterCheck.cs@67] -06/15/2026 22:36:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:36:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9914915. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2113172. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:36:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:36:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:37:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351798, estimate=49.30577935228878 for layer 29, Z=2.901 [PrintingService.cs@1524] -06/15/2026 22:37:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 29, island count 7 [PrintingService.cs@1569] -06/15/2026 22:37:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 30, start=0, count=232, Z=3.001 [PrintingService.cs@1518] -06/15/2026 22:37:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 99, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:37:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.33333 with temperature 126.5 [HeaterCheck.cs@67] -06/15/2026 22:37:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.33333 with temperature 126.75 [HeaterCheck.cs@67] -06/15/2026 22:37:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 50 [HeaterCheck.cs@67] -06/15/2026 22:37:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.33333 with temperature 126.5 [HeaterCheck.cs@67] -06/15/2026 22:37:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.33333 with temperature 126.5 [HeaterCheck.cs@67] -06/15/2026 22:37:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.333332 with temperature 51.75 [HeaterCheck.cs@67] -06/15/2026 22:37:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 50 [HeaterCheck.cs@67] -06/15/2026 22:37:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.75 [HeaterCheck.cs@67] -06/15/2026 22:37:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.33201599121094, Elapsed=00:00:27.2215673 [ControlledHeating.cs@486] -06/15/2026 22:37:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.47772216796875 after 00:00:30.2256745 [ControlledHeating.cs@493] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2521993. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0603423. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3188663. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3362516. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:37:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 163716891448 (163716891448 @ 0) for mcu = 1349.725175 [15/06/2026 21:25:36] (1364.3074287333334 sec) to 166133468987 (from now=166013468987, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 163716891448 (163716891448 @ 0) for mcu = 1349.725175 [15/06/2026 21:25:36] (1364.3074287333334 sec) to 166133468987 (from external timestamp, flags=None, requested=166133468987 (166133468987 @ 0) for mcu = 1369.863657 [15/06/2026 21:25:56] (1384.4455748916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 163716891448 (163716891448 @ 0) for mcu = 1349.725175 [15/06/2026 21:25:36] (1364.3074287333334 sec) to 166133468987 (from external timestamp, flags=None, requested=166133468987 (166133468987 @ 0) for mcu = 1369.863657 [15/06/2026 21:25:56] (1384.4455748916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:37:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 50.25 [HeaterCheck.cs@67] -06/15/2026 22:37:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 131.33333 with temperature 121.75 [HeaterCheck.cs@111] -06/15/2026 22:37:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1219.4472509, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.41572644536458, Elapsed = 00:20:19.4592499, TimeTotal = 06:15:17.0023302, Remaining = 05:54:57.5430803, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:47.9500830, WeightTotalEstimate = 01:08:47.9500830, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:54.4903312, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:19.4592499, HeatingEstimate = 00:49:40.5527491, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:15.0517742, WeightEstimate = 01:08:47.9500830 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:32:18. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:37:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.41572644536458;StartedAtUtc;00:20:19.4592499;06:15:17.0023302;05:54:57.5430803;False;232;0;0;00:00:00;01:08:47.9500830;01:08:47.9500830;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:54.4903312;00:00:00;02:00:00;00:20:19.4592499;00:49:40.5527491;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:15.0517742 [PrintingService.cs@1918] -06/15/2026 22:37:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=132.33333333333331,printChamber1=132.33333333333331,printChamber2=132.33333333333331,printChamber3=132.33333333333331,printChamber4=132.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:37:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 132.33333 with temperature 126.75 [HeaterCheck.cs@88] -06/15/2026 22:37:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 132.33333 with temperature 122 [HeaterCheck.cs@88] -06/15/2026 22:37:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.5 [HeaterCheck.cs@67] -06/15/2026 22:37:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.333332 with temperature 49.75 [HeaterCheck.cs@67] -06/15/2026 22:37:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=55.33333333333333,powderChamber1=55.33333333333333,powderChamber2=55.33333333333333,powderChamber3=55.33333333333333,powderChamber4=55.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:37:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 55.333332 with temperature 49.25 [HeaterCheck.cs@88] -06/15/2026 22:37:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.57143020629883 [HeaterCheck.cs@67] -06/15/2026 22:37:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.85714340209961 [HeaterCheck.cs@67] -06/15/2026 22:37:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.92856979370117 [HeaterCheck.cs@67] -06/15/2026 22:37:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=121.75 that are outside of set tolerance 10 for current step target 132.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:37:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 55.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:37:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1227.9487238, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.453482111628392, Elapsed = 00:20:27.9606925, TimeTotal = 06:15:17.0022999, Remaining = 05:54:49.0416074, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:08:47.9500830, WeightTotalEstimate = 01:08:47.9500830, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:04:54.4903312, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:27.9606925, HeatingEstimate = 00:49:32.0512762, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:15.0517742, WeightEstimate = 01:08:47.9500830 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:32:18. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:37:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.453482111628392;StartedAtUtc;00:20:27.9606925;06:15:17.0022999;05:54:49.0416074;False;232;0;0;00:00:00;01:08:47.9500830;01:08:47.9500830;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:04:54.4903312;00:00:00;02:00:00;00:20:27.9606925;00:49:32.0512762;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:15.0517742 [PrintingService.cs@1918] -06/15/2026 22:37:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=133.33333333333331,printChamber1=133.33333333333331,printChamber2=133.33333333333331,printChamber3=133.33333333333331,printChamber4=133.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:37:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9995720. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:37:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9995720. Loops = 44. GC duration = 00:00:00.2845157. SinceCollect=00:01:00.7303819. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:37:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3149, gen1=664, gen2=42, LatencyMode=Interactive, FreeMemory=5940379648, Live=441105160, HeapSizeBytes=469040832, FragmentedBytes=28066336, TotalCommittedBytes=476938240, PinnedObjectsCount=25, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:37:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:37:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:37:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (345 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:37:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.67856979370117 [HeaterCheck.cs@67] -06/15/2026 22:37:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.53571319580078 [HeaterCheck.cs@67] -06/15/2026 22:37:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.57143020629883 [HeaterCheck.cs@67] -06/15/2026 22:37:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.64285659790039 [HeaterCheck.cs@67] -06/15/2026 22:37:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.35714340209961 [HeaterCheck.cs@67] -06/15/2026 22:37:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.78571319580078 [HeaterCheck.cs@67] -06/15/2026 22:37:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=44.75 that are outside of set tolerance 10 for current step target 55.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:37:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.67856979370117 [HeaterCheck.cs@67] -06/15/2026 22:37:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.64285659790039 [HeaterCheck.cs@67] -06/15/2026 22:37:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.35714340209961 [HeaterCheck.cs@67] -06/15/2026 22:37:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 51 [HeaterCheck.cs@67] -06/15/2026 22:37:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.85714340209961 [HeaterCheck.cs@67] -06/15/2026 22:37:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=123.21428680419922,printChamber2=123.25 that are outside of set tolerance 10 for current step target 133.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:37:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:37:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 133.33333 with temperature 122.46428680419922 [HeaterCheck.cs@111] -06/15/2026 22:37:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.57143020629883 [HeaterCheck.cs@67] -06/15/2026 22:37:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262858, estimate=49.33692781658621 for layer 30, Z=3.001 [PrintingService.cs@1524] -06/15/2026 22:37:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 30, island count 7 [PrintingService.cs@1569] -06/15/2026 22:37:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 31, start=0, count=232, Z=3.101 [PrintingService.cs@1518] -06/15/2026 22:37:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 98, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:37:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 133.33333 with temperature 128.5 [HeaterCheck.cs@67] -06/15/2026 22:37:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 55.333332 with temperature 50.64285659790039 [HeaterCheck.cs@67] -06/15/2026 22:37:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1240.4468953, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.502590099955265, Elapsed = 00:20:40.4588608, TimeTotal = 06:15:43.1812704, Remaining = 05:55:02.7224096, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:14.1290567, WeightTotalEstimate = 01:09:14.1290567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:20.6693049, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:40.4588608, HeatingEstimate = 00:49:19.5531047, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:41.2307479, WeightEstimate = 01:09:14.1290567 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:32:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:37:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.502590099955265;StartedAtUtc;00:20:40.4588608;06:15:43.1812704;05:55:02.7224096;False;232;0;0;00:00:00;01:09:14.1290567;01:09:14.1290567;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:20.6693049;00:00:00;02:00:00;00:20:40.4588608;00:49:19.5531047;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:41.2307479 [PrintingService.cs@1918] -06/15/2026 22:37:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=134.33333333333331,printChamber1=134.33333333333331,printChamber2=134.33333333333331,printChamber3=134.33333333333331,printChamber4=134.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:37:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 55.333332 with temperature 42 [HeaterCheck.cs@111] -06/15/2026 22:37:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.2957763671875, Elapsed=00:00:27.5024835 [ControlledHeating.cs@486] -06/15/2026 22:37:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0387069 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:37:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 51 [HeaterCheck.cs@67] -06/15/2026 22:37:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 134.33333 with temperature 129.5 [HeaterCheck.cs@67] -06/15/2026 22:37:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.33333 with temperature 129.42857360839844 [HeaterCheck.cs@67] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.51272583007812 after 00:00:30.5099952 [ControlledHeating.cs@493] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0311378. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633456. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0968137. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1069988. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:37:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 167344990215 (167344990215 @ 0) for mcu = 1379.959863 [15/06/2026 21:26:07] (1394.541585125 sec) to 169793544901 (from now=169673544901, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 167344990215 (167344990215 @ 0) for mcu = 1379.959863 [15/06/2026 21:26:07] (1394.541585125 sec) to 169793544901 (from external timestamp, flags=None, requested=169793544901 (169793544901 @ 0) for mcu = 1400.364830 [15/06/2026 21:26:27] (1414.9462075083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 167344990215 (167344990215 @ 0) for mcu = 1379.959863 [15/06/2026 21:26:07] (1394.541585125 sec) to 169793544901 (from external timestamp, flags=None, requested=169793544901 (169793544901 @ 0) for mcu = 1400.364830 [15/06/2026 21:26:27] (1414.9462075083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:37:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=123.82142639160156 that are outside of set tolerance 10 for current step target 134.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:37:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 134.33333 with temperature 129.5 [HeaterCheck.cs@67] -06/15/2026 22:37:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 134.33333 with temperature 129.5 [HeaterCheck.cs@67] -06/15/2026 22:37:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:37:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 134.33333 with temperature 129.5 [HeaterCheck.cs@67] -06/15/2026 22:37:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 134.33333 with temperature 130 [HeaterCheck.cs@67] -06/15/2026 22:37:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 134.33333 with temperature 130 [HeaterCheck.cs@67] -06/15/2026 22:37:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:37:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 51 [HeaterCheck.cs@67] -06/15/2026 22:37:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.75 [HeaterCheck.cs@67] -06/15/2026 22:38:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2116652. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:38:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:38:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:38:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1272.9713688, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.646866482825141, Elapsed = 00:21:12.9833481, TimeTotal = 06:15:43.1812842, Remaining = 05:54:30.1979361, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:14.1290567, WeightTotalEstimate = 01:09:14.1290567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:20.6693049, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:12.9833481, HeatingEstimate = 00:48:47.0286312, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:41.2307479, WeightEstimate = 01:09:14.1290567 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:32:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:38:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.646866482825141;StartedAtUtc;00:21:12.9833481;06:15:43.1812842;05:54:30.1979361;False;232;0;0;00:00:00;01:09:14.1290567;01:09:14.1290567;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:20.6693049;00:00:00;02:00:00;00:21:12.9833481;00:48:47.0286312;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:41.2307479 [PrintingService.cs@1918] -06/15/2026 22:38:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=135.33333333333331,printChamber1=135.33333333333331,printChamber2=135.33333333333331,printChamber3=135.33333333333331,printChamber4=135.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:38:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.99891662597656, Elapsed=00:00:27.2004304 [ControlledHeating.cs@486] -06/15/2026 22:38:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.35292053222656 after 00:00:30.2009582 [ControlledHeating.cs@493] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2378368. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628647. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3046041. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3154177. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:38:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 171005066129 (171005066129 @ 0) for mcu = 1410.461031 [15/06/2026 21:26:37] (1425.0422177416667 sec) to 173418570637 (from now=173298570637, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 171005066129 (171005066129 @ 0) for mcu = 1410.461031 [15/06/2026 21:26:37] (1425.0422177416667 sec) to 173418570637 (from external timestamp, flags=None, requested=173418570637 (173418570637 @ 0) for mcu = 1430.573918 [15/06/2026 21:26:57] (1445.1547553083333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 171005066129 (171005066129 @ 0) for mcu = 1410.461031 [15/06/2026 21:26:37] (1425.0422177416667 sec) to 173418570637 (from external timestamp, flags=None, requested=173418570637 (173418570637 @ 0) for mcu = 1430.573918 [15/06/2026 21:26:57] (1445.1547553083333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=351801, estimate=49.29514846897429 for layer 31, Z=3.101 [PrintingService.cs@1524] -06/15/2026 22:38:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 31, island count 7 [PrintingService.cs@1569] -06/15/2026 22:38:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 32, start=0, count=232, Z=3.201 [PrintingService.cs@1518] -06/15/2026 22:38:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 88, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.75 [HeaterCheck.cs@67] -06/15/2026 22:38:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:22 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=124.5,printChamber3=124.5 that are outside of set tolerance 10 for current step target 135.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:38:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 135.33333 with temperature 130.5 [HeaterCheck.cs@67] -06/15/2026 22:38:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 51 [HeaterCheck.cs@67] -06/15/2026 22:38:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 135.33333 with temperature 130.5 [HeaterCheck.cs@67] -06/15/2026 22:38:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9764966. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:38:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (118 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:38:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9764966. Loops = 44. GC duration = 00:00:00.2857590. SinceCollect=00:01:00.7102141. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:38:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3258, gen1=770, gen2=43, LatencyMode=Interactive, FreeMemory=5950423040, Live=441414880, HeapSizeBytes=469036928, FragmentedBytes=28049712, TotalCommittedBytes=475742208, PinnedObjectsCount=25, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:38:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:38:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:38:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:38:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 135.33333 with temperature 130.5 [HeaterCheck.cs@67] -06/15/2026 22:38:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 55.333332 with temperature 48 [HeaterCheck.cs@111] -06/15/2026 22:38:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.75 [HeaterCheck.cs@67] -06/15/2026 22:38:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1293.4804714, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.737455237049917, Elapsed = 00:21:33.4924320, TimeTotal = 06:15:44.7062950, Remaining = 05:54:11.2138630, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:15.6540862, WeightTotalEstimate = 01:09:15.6540862, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:22.1943344, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:33.4924320, HeatingEstimate = 00:48:26.5195286, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.7557774, WeightEstimate = 01:09:15.6540862 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:32:46. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:38:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.737455237049917;StartedAtUtc;00:21:33.4924320;06:15:44.7062950;05:54:11.2138630;False;232;0;0;00:00:00;01:09:15.6540862;01:09:15.6540862;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:22.1943344;00:00:00;02:00:00;00:21:33.4924320;00:48:26.5195286;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.7557774 [PrintingService.cs@1918] -06/15/2026 22:38:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=136.33333333333331,printChamber1=136.33333333333331,printChamber2=136.33333333333331,printChamber3=136.33333333333331,printChamber4=136.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:38:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.5 [HeaterCheck.cs@67] -06/15/2026 22:38:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.333332 with temperature 50.75 [HeaterCheck.cs@67] -06/15/2026 22:38:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=56.33333333333333,powderChamber1=56.33333333333333,powderChamber2=56.33333333333333,powderChamber3=56.33333333333333,powderChamber4=56.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:38:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 56.333332 with temperature 50.5 [HeaterCheck.cs@88] -06/15/2026 22:38:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 136.33333 with temperature 131.39285278320312 [HeaterCheck.cs@67] -06/15/2026 22:38:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 136.33333 with temperature 131.39285278320312 [HeaterCheck.cs@67] -06/15/2026 22:38:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 136.33333 with temperature 131.4642791748047 [HeaterCheck.cs@67] -06/15/2026 22:38:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=125.75 that are outside of set tolerance 10 for current step target 136.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:38:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1301.9806488, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.775159194909499, Elapsed = 00:21:41.9926828, TimeTotal = 06:15:44.7063684, Remaining = 05:54:02.7136856, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:15.6540862, WeightTotalEstimate = 01:09:15.6540862, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:22.1943344, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:41.9926828, HeatingEstimate = 00:48:18.0193512, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.7557774, WeightEstimate = 01:09:15.6540862 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:32:46. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:38:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.775159194909499;StartedAtUtc;00:21:41.9926828;06:15:44.7063684;05:54:02.7136856;False;232;0;0;00:00:00;01:09:15.6540862;01:09:15.6540862;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:22.1943344;00:00:00;02:00:00;00:21:41.9926828;00:48:18.0193512;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.7557774 [PrintingService.cs@1918] -06/15/2026 22:38:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=137.33333333333331,printChamber1=137.33333333333331,printChamber2=137.33333333333331,printChamber3=137.33333333333331,printChamber4=137.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:38:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=45.5 that are outside of set tolerance 10 for current step target 56.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:38:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:38:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 56.333332 with temperature 44 [HeaterCheck.cs@111] -06/15/2026 22:38:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.5855255126953, Elapsed=00:00:27.5195437 [ControlledHeating.cs@486] -06/15/2026 22:38:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0660751 ~ 5.99 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:38:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 52.5 [HeaterCheck.cs@67] -06/15/2026 22:38:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 53 [HeaterCheck.cs@67] -06/15/2026 22:38:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.28277587890625 after 00:00:30.5269996 [ControlledHeating.cs@493] -06/15/2026 22:38:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0445760. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:38:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631539. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1110699. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1265984. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:38:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 174630091865 (174630091865 @ 0) for mcu = 1440.670159 [15/06/2026 21:27:07] (1455.2507655416666 sec) to 177081079532 (from now=176961079532, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 174630091865 (174630091865 @ 0) for mcu = 1440.670159 [15/06/2026 21:27:07] (1455.2507655416666 sec) to 177081079532 (from external timestamp, flags=None, requested=177081079532 (177081079532 @ 0) for mcu = 1461.095435 [15/06/2026 21:27:28] (1475.6756627666666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 174630091865 (174630091865 @ 0) for mcu = 1440.670159 [15/06/2026 21:27:07] (1455.2507655416666 sec) to 177081079532 (from external timestamp, flags=None, requested=177081079532 (177081079532 @ 0) for mcu = 1461.095435 [15/06/2026 21:27:28] (1475.6756627666666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:38:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:38:51 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=126.75 that are outside of set tolerance 10 for current step target 137.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:38:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1310.4850313, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.812881566243732, Elapsed = 00:21:50.4970816, TimeTotal = 06:15:44.7063847, Remaining = 05:53:54.2093031, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:15.6540862, WeightTotalEstimate = 01:09:15.6540862, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:05:22.1943344, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:50.4970816, HeatingEstimate = 00:48:09.5149687, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:20:42.7557774, WeightEstimate = 01:09:15.6540862 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:32:46. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:38:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.812881566243732;StartedAtUtc;00:21:50.4970816;06:15:44.7063847;05:53:54.2093031;False;232;0;0;00:00:00;01:09:15.6540862;01:09:15.6540862;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:05:22.1943344;00:00:00;02:00:00;00:21:50.4970816;00:48:09.5149687;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:20:42.7557774 [PrintingService.cs@1918] -06/15/2026 22:38:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=138.33333333333331,printChamber1=138.33333333333331,printChamber2=138.33333333333331,printChamber3=138.33333333333331,printChamber4=138.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=262872, estimate=49.33819683229244 for layer 32, Z=3.201 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 7 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 33, start=0, count=232, Z=3.3009999 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 33, Z=3.3009999 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 34, start=0, count=232, Z=3.401 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 34, Z=3.401 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 35, start=0, count=232, Z=3.501 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 35, Z=3.501 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 36, start=0, count=232, Z=3.601 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 36, Z=3.601 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 37, start=0, count=232, Z=3.701 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 37, Z=3.701 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 38, start=0, count=232, Z=3.8009999 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 38, Z=3.8009999 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 39, start=0, count=232, Z=3.901 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 39, Z=3.901 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 40, start=0, count=232, Z=4.001 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 40, Z=4.001 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 41, start=0, count=232, Z=4.101 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 41, Z=4.101 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 42, start=0, count=232, Z=4.201 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 42, Z=4.201 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 43, start=0, count=232, Z=4.301 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 43, Z=4.301 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 44, start=0, count=232, Z=4.401 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 44, Z=4.401 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 45, start=0, count=232, Z=4.501 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 45, Z=4.501 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 46, start=0, count=232, Z=4.601 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 46, Z=4.601 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 47, start=0, count=232, Z=4.701 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 47, Z=4.701 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 48, start=0, count=232, Z=4.801 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 48, Z=4.801 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 49, start=0, count=232, Z=4.901 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 49, Z=4.901 [PrintingService.cs@1524] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] -06/15/2026 22:38:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 50, start=0, count=232, Z=5.001 [PrintingService.cs@1518] -06/15/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 144, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:38:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=128.25 that are outside of set tolerance 10 for current step target 138.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:39:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2341384. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:39:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:39:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:39:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 53.25 [HeaterCheck.cs@67] -06/15/2026 22:39:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 138.33333 with temperature 133.5 [HeaterCheck.cs@67] -06/15/2026 22:39:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 138.33333 with temperature 133.75 [HeaterCheck.cs@67] -06/15/2026 22:39:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:39:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 138.33333 with temperature 133.5 [HeaterCheck.cs@67] -06/15/2026 22:39:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.57479858398438, Elapsed=00:00:27.2035847 [ControlledHeating.cs@486] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.39230346679688 after 00:00:30.2047660 [ControlledHeating.cs@493] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2521084. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632193. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3157328. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3284416. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:39:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 178292600760 (178292600760 @ 0) for mcu = 1471.191566 [15/06/2026 21:27:38] (1485.771673 sec) to 180705244086 (from now=180585244086, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 178292600760 (178292600760 @ 0) for mcu = 1471.191566 [15/06/2026 21:27:38] (1485.771673 sec) to 180705244086 (from external timestamp, flags=None, requested=180705244086 (180705244086 @ 0) for mcu = 1491.297277 [15/06/2026 21:27:58] (1505.87703405 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 178292600760 (178292600760 @ 0) for mcu = 1471.191566 [15/06/2026 21:27:38] (1485.771673 sec) to 180705244086 (from external timestamp, flags=None, requested=180705244086 (180705244086 @ 0) for mcu = 1491.297277 [15/06/2026 21:27:58] (1505.87703405 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:39:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 52 [HeaterCheck.cs@67] -06/15/2026 22:39:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1343.9901696, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.950732584482064, Elapsed = 00:22:24.0021332, TimeTotal = 06:16:25.4903429, Remaining = 05:54:01.4882097, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:09:56.4381311, WeightTotalEstimate = 01:09:56.4381311, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:02.9783793, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:24.0021332, HeatingEstimate = 00:47:36.0098304, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:23.5398223, WeightEstimate = 01:09:56.4381311 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:27. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:39:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.950732584482064;StartedAtUtc;00:22:24.0021332;06:16:25.4903429;05:54:01.4882097;False;232;0;0;00:00:00;01:09:56.4381311;01:09:56.4381311;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:02.9783793;00:00:00;02:00:00;00:22:24.0021332;00:47:36.0098304;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:23.5398223 [PrintingService.cs@1918] -06/15/2026 22:39:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=139.33333333333331,printChamber1=139.33333333333331,printChamber2=139.33333333333331,printChamber3=139.33333333333331,printChamber4=139.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:39:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=202682, estimate=38.25671092831767 for layer 50, Z=5.001 [PrintingService.cs@1524] -06/15/2026 22:39:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 8 [PrintingService.cs@1569] -06/15/2026 22:39:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 51, start=0, count=232, Z=5.101 [PrintingService.cs@1518] -06/15/2026 22:39:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 237, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:39:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 53 [HeaterCheck.cs@67] -06/15/2026 22:39:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (431 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:39:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:39:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.3766857. SinceCollect=00:01:00.8090425. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:39:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3357, gen1=844, gen2=44, LatencyMode=Interactive, FreeMemory=5918638080, Live=442317912, HeapSizeBytes=469947040, FragmentedBytes=28065560, TotalCommittedBytes=477052928, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:39:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:39:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:39:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.75 [HeaterCheck.cs@67] -06/15/2026 22:39:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:39:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=128.92857360839844 that are outside of set tolerance 10 for current step target 139.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:39:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.75 [HeaterCheck.cs@67] -06/15/2026 22:39:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.75 [HeaterCheck.cs@67] -06/15/2026 22:39:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1352.4961229, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 5.986118283887546, Elapsed = 00:22:32.5080884, TimeTotal = 06:16:34.0755638, Remaining = 05:54:01.5674754, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:05.0233501, WeightTotalEstimate = 01:10:05.0233501, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:11.5635983, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:32.5080884, HeatingEstimate = 00:47:27.5038771, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:32.1250413, WeightEstimate = 01:10:05.0233501 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:35. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:39:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.986118283887546;StartedAtUtc;00:22:32.5080884;06:16:34.0755638;05:54:01.5674754;False;232;0;0;00:00:00;01:10:05.0233501;01:10:05.0233501;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:11.5635983;00:00:00;02:00:00;00:22:32.5080884;00:47:27.5038771;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:32.1250413 [PrintingService.cs@1918] -06/15/2026 22:39:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=140.33333333333331,printChamber1=140.33333333333331,printChamber2=140.33333333333331,printChamber3=140.33333333333331,printChamber4=140.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:39:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 140.33333 with temperature 135.39285278320312 [HeaterCheck.cs@67] -06/15/2026 22:39:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:39:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.75 [HeaterCheck.cs@67] -06/15/2026 22:39:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:39:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:39:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 56.333332 with temperature 49 [HeaterCheck.cs@111] -06/15/2026 22:39:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:39:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 140.33333 with temperature 135.75 [HeaterCheck.cs@67] -06/15/2026 22:39:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.333332 with temperature 51.5 [HeaterCheck.cs@67] -06/15/2026 22:39:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1359.998176, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.019321901151622, Elapsed = 00:22:40.0101386, TimeTotal = 06:16:34.0755609, Remaining = 05:53:54.0654223, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:05.0233501, WeightTotalEstimate = 01:10:05.0233501, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:11.5635983, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:40.0101386, HeatingEstimate = 00:47:20.0018240, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:32.1250413, WeightEstimate = 01:10:05.0233501 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:35. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:39:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.019321901151622;StartedAtUtc;00:22:40.0101386;06:16:34.0755609;05:53:54.0654223;False;232;0;0;00:00:00;01:10:05.0233501;01:10:05.0233501;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:11.5635983;00:00:00;02:00:00;00:22:40.0101386;00:47:20.0018240;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:32.1250413 [PrintingService.cs@1918] -06/15/2026 22:39:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=141.33333333333331,printChamber1=141.33333333333331,printChamber2=141.33333333333331,printChamber3=141.33333333333331,printChamber4=141.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:39:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 141.33333 with temperature 136.25 [HeaterCheck.cs@88] -06/15/2026 22:39:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=57.33333333333333,powderChamber1=57.33333333333333,powderChamber2=57.33333333333333,powderChamber3=57.33333333333333,powderChamber4=57.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:39:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 57.333332 with temperature 49.5 [HeaterCheck.cs@88] -06/15/2026 22:39:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 141.33333 with temperature 137 [HeaterCheck.cs@67] -06/15/2026 22:39:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 141.33333 with temperature 136.5 [HeaterCheck.cs@67] -06/15/2026 22:39:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:39:44 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:39:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/15/2026 22:39:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:39:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 22:39:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.333332 with temperature 52.5 [HeaterCheck.cs@67] -06/15/2026 22:39:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/15/2026 22:39:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/15/2026 22:39:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 57.333332 with temperature 52.5 [HeaterCheck.cs@67] -06/15/2026 22:39:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1514563 ~ 5.98 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:39:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:39:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.244873046875, Elapsed=00:00:27.5937416 [ControlledHeating.cs@486] -06/15/2026 22:39:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=130.5 that are outside of set tolerance 10 for current step target 141.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:39:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=58.33333333333333,powderChamber1=58.33333333333333,powderChamber2=58.33333333333333,powderChamber3=58.33333333333333,powderChamber4=58.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 141.33333 with temperature 136.5 [HeaterCheck.cs@67] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.54396057128906 after 00:00:30.5961084 [ControlledHeating.cs@493] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0423875. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631155. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1142054. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1269857. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:39:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 181916765314 (181916765314 @ 0) for mcu = 1501.393470 [15/06/2026 21:28:08] (1515.9730442833334 sec) to 184378122887 (from now=184258122887, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 181916765314 (181916765314 @ 0) for mcu = 1501.393470 [15/06/2026 21:28:08] (1515.9730442833334 sec) to 184378122887 (from external timestamp, flags=None, requested=184378122887 (184378122887 @ 0) for mcu = 1521.905142 [15/06/2026 21:28:28] (1536.4843573916667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 181916765314 (181916765314 @ 0) for mcu = 1501.393470 [15/06/2026 21:28:08] (1515.9730442833334 sec) to 184378122887 (from external timestamp, flags=None, requested=184378122887 (184378122887 @ 0) for mcu = 1521.905142 [15/06/2026 21:28:28] (1536.4843573916667 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:39:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:39:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 141.33333 with temperature 136.75 [HeaterCheck.cs@67] -06/15/2026 22:39:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 141.33333 with temperature 136.75 [HeaterCheck.cs@67] -06/15/2026 22:39:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=43.75 that are outside of set tolerance 10 for current step target 58.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:39:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=267970, estimate=37.67019591262679 for layer 51, Z=5.101 [PrintingService.cs@1524] -06/15/2026 22:39:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 8 [PrintingService.cs@1569] -06/15/2026 22:39:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 52, start=0, count=232, Z=5.201 [PrintingService.cs@1518] -06/15/2026 22:39:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 260, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:40:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9611883. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2369195. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:40:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:40:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:40:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 141.33333 with temperature 136.75 [HeaterCheck.cs@67] -06/15/2026 22:40:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 141.33333 with temperature 136.5 [HeaterCheck.cs@67] -06/15/2026 22:40:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 141.33333 with temperature 136.5 [HeaterCheck.cs@67] -06/15/2026 22:40:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 141.33333 with temperature 137 [HeaterCheck.cs@67] -06/15/2026 22:40:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54.25 [HeaterCheck.cs@67] -06/15/2026 22:40:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1395.5221161, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.175036368398998, Elapsed = 00:23:15.5341601, TimeTotal = 06:16:39.6103803, Remaining = 05:53:24.0762202, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:10.5580881, WeightTotalEstimate = 01:10:10.5580881, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:17.0983363, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:15.5341601, HeatingEstimate = 00:46:44.4778839, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:37.6597793, WeightEstimate = 01:10:10.5580881 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:40:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.175036368398998;StartedAtUtc;00:23:15.5341601;06:16:39.6103803;05:53:24.0762202;False;232;0;0;00:00:00;01:10:10.5580881;01:10:10.5580881;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:17.0983363;00:00:00;02:00:00;00:23:15.5341601;00:46:44.4778839;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:37.6597793 [PrintingService.cs@1918] -06/15/2026 22:40:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=142.33333333333331,printChamber1=142.33333333333331,printChamber2=142.33333333333331,printChamber3=142.33333333333331,printChamber4=142.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:40:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.91278076171875, Elapsed=00:00:27.2093093 [ControlledHeating.cs@486] -06/15/2026 22:40:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.33302307128906 after 00:00:30.2095354 [ControlledHeating.cs@493] -06/15/2026 22:40:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2584317. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:40:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629919. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3266278. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3403533. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:40:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 185589644115 (185589644115 @ 0) for mcu = 1532.001338 [15/06/2026 21:28:39] (1546.580367625 sec) to 188003653343 (from now=187883653343, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 185589644115 (185589644115 @ 0) for mcu = 1532.001338 [15/06/2026 21:28:39] (1546.580367625 sec) to 188003653343 (from external timestamp, flags=None, requested=188003653343 (188003653343 @ 0) for mcu = 1552.118436 [15/06/2026 21:28:59] (1566.6971111916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 185589644115 (185589644115 @ 0) for mcu = 1532.001338 [15/06/2026 21:28:39] (1546.580367625 sec) to 188003653343 (from external timestamp, flags=None, requested=188003653343 (188003653343 @ 0) for mcu = 1552.118436 [15/06/2026 21:28:59] (1566.6971111916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:40:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:24 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=131.75 that are outside of set tolerance 10 for current step target 142.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:40:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1404.0247611, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.212659056993865, Elapsed = 00:23:24.0367369, TimeTotal = 06:16:39.6103121, Remaining = 05:53:15.5735752, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:10.5580881, WeightTotalEstimate = 01:10:10.5580881, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:17.0983363, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:24.0367369, HeatingEstimate = 00:46:35.9752389, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:37.6597793, WeightEstimate = 01:10:10.5580881 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:40:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.212659056993865;StartedAtUtc;00:23:24.0367369;06:16:39.6103121;05:53:15.5735752;False;232;0;0;00:00:00;01:10:10.5580881;01:10:10.5580881;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:17.0983363;00:00:00;02:00:00;00:23:24.0367369;00:46:35.9752389;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:37.6597793 [PrintingService.cs@1918] -06/15/2026 22:40:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=143.33333333333331,printChamber1=143.33333333333331,printChamber2=143.33333333333331,printChamber3=143.33333333333331,printChamber4=143.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:40:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 143.33333 with temperature 137.5357208251953 [HeaterCheck.cs@88] -06/15/2026 22:40:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=202651, estimate=38.35715078775493 for layer 52, Z=5.201 [PrintingService.cs@1524] -06/15/2026 22:40:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 8 [PrintingService.cs@1569] -06/15/2026 22:40:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 53, start=0, count=232, Z=5.301 [PrintingService.cs@1518] -06/15/2026 22:40:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 245, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:40:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:40:32 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (230 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:40:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.3049048. SinceCollect=00:01:00.7498457. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:40:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3462, gen1=907, gen2=45, LatencyMode=Interactive, FreeMemory=5946687488, Live=441679256, HeapSizeBytes=469230312, FragmentedBytes=27884720, TotalCommittedBytes=481656832, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:40:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:40:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:40:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=133.25 that are outside of set tolerance 10 for current step target 143.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:40:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 143.33333 with temperature 138.5 [HeaterCheck.cs@67] -06/15/2026 22:40:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 143.33333 with temperature 138.5 [HeaterCheck.cs@67] -06/15/2026 22:40:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 143.33333 with temperature 138.75 [HeaterCheck.cs@67] -06/15/2026 22:40:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 143.33333 with temperature 138.5 [HeaterCheck.cs@67] -06/15/2026 22:40:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58.333332 with temperature 44.5 [HeaterCheck.cs@111] -06/15/2026 22:40:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1058148 ~ 5.99 samples/sec, 2 resets, 3 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:40:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.435546875, Elapsed=00:00:27.5324461 [ControlledHeating.cs@486] -06/15/2026 22:40:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1427.5284008, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.315602632227485, Elapsed = 00:23:47.5403654, TimeTotal = 06:16:43.3911335, Remaining = 05:52:55.8507681, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:14.3389207, WeightTotalEstimate = 01:10:14.3389207, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:20.8791689, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:47.5403654, HeatingEstimate = 00:46:12.4715992, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:41.4406119, WeightEstimate = 01:10:14.3389207 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:40:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.315602632227485;StartedAtUtc;00:23:47.5403654;06:16:43.3911335;05:52:55.8507681;False;232;0;0;00:00:00;01:10:14.3389207;01:10:14.3389207;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:20.8791689;00:00:00;02:00:00;00:23:47.5403654;00:46:12.4715992;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:41.4406119 [PrintingService.cs@1918] -06/15/2026 22:40:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=144.33333333333331,printChamber1=144.33333333333331,printChamber2=144.33333333333331,printChamber3=144.33333333333331,printChamber4=144.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:40:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 144.33333 with temperature 139.25 [HeaterCheck.cs@88] -06/15/2026 22:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58.333332 with temperature 50.5 [HeaterCheck.cs@111] -06/15/2026 22:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 54.03571319580078 [HeaterCheck.cs@67] -06/15/2026 22:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.33333 with temperature 140.25 [HeaterCheck.cs@67] -06/15/2026 22:40:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.96428680419922 [HeaterCheck.cs@67] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 54.25 [HeaterCheck.cs@67] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.45013427734375 after 00:00:30.5314819 [ControlledHeating.cs@493] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0290729. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632025. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0948826. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1063281. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:40:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 189215174571 (189215174571 @ 0) for mcu = 1562.214673 [15/06/2026 21:29:09] (1576.793121425 sec) to 191665486770 (from now=191545486770, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 189215174571 (189215174571 @ 0) for mcu = 1562.214673 [15/06/2026 21:29:09] (1576.793121425 sec) to 191665486770 (from external timestamp, flags=None, requested=191665486770 (191665486770 @ 0) for mcu = 1582.634316 [15/06/2026 21:29:29] (1597.21238975 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 189215174571 (189215174571 @ 0) for mcu = 1562.214673 [15/06/2026 21:29:09] (1576.793121425 sec) to 191665486770 (from external timestamp, flags=None, requested=191665486770 (191665486770 @ 0) for mcu = 1582.634316 [15/06/2026 21:29:29] (1597.21238975 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.33333 with temperature 140.25 [HeaterCheck.cs@67] -06/15/2026 22:40:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 55.25 [HeaterCheck.cs@67] -06/15/2026 22:40:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.35714340209961 [HeaterCheck.cs@67] -06/15/2026 22:40:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.53571319580078 [HeaterCheck.cs@67] -06/15/2026 22:40:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.96428680419922 [HeaterCheck.cs@67] -06/15/2026 22:40:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.96428680419922 [HeaterCheck.cs@67] -06/15/2026 22:40:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=133.5 that are outside of set tolerance 10 for current step target 144.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:40:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.78571319580078 [HeaterCheck.cs@67] -06/15/2026 22:40:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=267943, estimate=37.8262669729965 for layer 53, Z=5.301 [PrintingService.cs@1524] -06/15/2026 22:40:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 8 [PrintingService.cs@1569] -06/15/2026 22:40:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 54, start=0, count=232, Z=5.401 [PrintingService.cs@1518] -06/15/2026 22:40:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 183, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:40:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.85714340209961 [HeaterCheck.cs@67] -06/15/2026 22:40:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.78571319580078 [HeaterCheck.cs@67] -06/15/2026 22:41:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.96428680419922 [HeaterCheck.cs@67] -06/15/2026 22:41:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.78571319580078 [HeaterCheck.cs@67] -06/15/2026 22:41:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.96428680419922 [HeaterCheck.cs@67] -06/15/2026 22:41:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.67856979370117 [HeaterCheck.cs@67] -06/15/2026 22:41:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9911678. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2165713. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:41:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:41:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:41:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:41:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.57143020629883 [HeaterCheck.cs@67] -06/15/2026 22:41:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.85714340209961 [HeaterCheck.cs@67] -06/15/2026 22:41:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:41:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.75 [HeaterCheck.cs@67] -06/15/2026 22:41:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 54.07143020629883 [HeaterCheck.cs@67] -06/15/2026 22:41:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:41:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.67856979370117 [HeaterCheck.cs@67] -06/15/2026 22:41:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.46428680419922 [HeaterCheck.cs@67] -06/15/2026 22:41:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.64285659790039 [HeaterCheck.cs@67] -06/15/2026 22:41:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.67856979370117 [HeaterCheck.cs@67] -06/15/2026 22:41:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.67856979370117 [HeaterCheck.cs@67] -06/15/2026 22:41:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.333332 with temperature 53.92856979370117 [HeaterCheck.cs@67] -06/15/2026 22:41:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:41:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1457.0425339, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.443916604307853, Elapsed = 00:24:17.0545831, TimeTotal = 06:16:51.3196767, Remaining = 05:52:34.2650936, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:22.2673793, WeightTotalEstimate = 01:10:22.2673793, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:28.8076275, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:17.0545831, HeatingEstimate = 00:45:42.9574661, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:49.3690705, WeightEstimate = 01:10:22.2673793 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:41:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.443916604307853;StartedAtUtc;00:24:17.0545831;06:16:51.3196767;05:52:34.2650936;False;232;0;0;00:00:00;01:10:22.2673793;01:10:22.2673793;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:28.8076275;00:00:00;02:00:00;00:24:17.0545831;00:45:42.9574661;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:49.3690705 [PrintingService.cs@1918] -06/15/2026 22:41:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=145.33333333333331,printChamber1=145.33333333333331,printChamber2=145.33333333333331,printChamber3=145.33333333333331,printChamber4=145.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:41:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.05453491210938, Elapsed=00:00:27.2208146 [ControlledHeating.cs@486] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.32623291015625 after 00:00:30.2220458 [ControlledHeating.cs@493] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2513956. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634505. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3144501. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3359435. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:41:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 192877007998 (192877007998 @ 0) for mcu = 1592.730488 [15/06/2026 21:29:39] (1607.3083999833334 sec) to 195293436972 (from now=195173436972, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 192877007998 (192877007998 @ 0) for mcu = 1592.730488 [15/06/2026 21:29:39] (1607.3083999833334 sec) to 195293436972 (from external timestamp, flags=None, requested=195293436972 (195293436972 @ 0) for mcu = 1612.867763 [15/06/2026 21:29:59] (1627.4453081 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 192877007998 (192877007998 @ 0) for mcu = 1592.730488 [15/06/2026 21:29:39] (1607.3083999833334 sec) to 195293436972 (from external timestamp, flags=None, requested=195293436972 (195293436972 @ 0) for mcu = 1612.867763 [15/06/2026 21:29:59] (1627.4453081 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:41:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=135.2857208251953 that are outside of set tolerance 10 for current step target 145.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:41:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 145.33333 with temperature 140.35714721679688 [HeaterCheck.cs@67] -06/15/2026 22:41:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=202666, estimate=38.25574919731536 for layer 54, Z=5.401 [PrintingService.cs@1524] -06/15/2026 22:41:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 8 [PrintingService.cs@1569] -06/15/2026 22:41:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 55, start=0, count=232, Z=5.501 [PrintingService.cs@1518] -06/15/2026 22:41:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:41:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 145.33333 with temperature 140.5 [HeaterCheck.cs@67] -06/15/2026 22:41:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 145.33333 with temperature 140.5 [HeaterCheck.cs@67] -06/15/2026 22:41:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:41:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:41:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9744008. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:41:33 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (67 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:41:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9744008. Loops = 44. GC duration = 00:00:00.2900365. SinceCollect=00:01:00.7430674. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:41:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3574, gen1=923, gen2=46, LatencyMode=Interactive, FreeMemory=5932367872, Live=441369776, HeapSizeBytes=469008040, FragmentedBytes=27933744, TotalCommittedBytes=478494720, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:41:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:41:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:41:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54.25 [HeaterCheck.cs@67] -06/15/2026 22:41:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0712333 ~ 6.01 samples/sec, 2 resets, 3 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:41:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:41:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.34849548339844, Elapsed=00:00:27.5108097 [ControlledHeating.cs@486] -06/15/2026 22:41:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.40066528320312 after 00:00:30.5198022 [ControlledHeating.cs@493] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0273118. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632467. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0914001. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1025067. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:41:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 196504958200 (196504958200 @ 0) for mcu = 1622.963988 [15/06/2026 21:30:10] (1637.5413183333333 sec) to 198954113101 (from now=198834113101, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 196504958200 (196504958200 @ 0) for mcu = 1622.963988 [15/06/2026 21:30:10] (1637.5413183333333 sec) to 198954113101 (from external timestamp, flags=None, requested=198954113101 (198954113101 @ 0) for mcu = 1643.373996 [15/06/2026 21:30:30] (1657.9509425083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 196504958200 (196504958200 @ 0) for mcu = 1622.963988 [15/06/2026 21:30:10] (1637.5413183333333 sec) to 198954113101 (from external timestamp, flags=None, requested=198954113101 (198954113101 @ 0) for mcu = 1643.373996 [15/06/2026 21:30:30] (1657.9509425083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:41:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:41:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 58.333332 with temperature 51.25 [HeaterCheck.cs@111] -06/15/2026 22:41:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:41:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1493.591332, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.603570029650742, Elapsed = 00:24:53.6032977, TimeTotal = 06:16:58.1185479, Remaining = 05:52:04.5152502, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:29.0663340, WeightTotalEstimate = 01:10:29.0663340, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:35.6065822, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:53.6032977, HeatingEstimate = 00:45:06.4086680, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:21:56.1680252, WeightEstimate = 01:10:29.0663340 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:33:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:41:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.603570029650742;StartedAtUtc;00:24:53.6032977;06:16:58.1185479;05:52:04.5152502;False;232;0;0;00:00:00;01:10:29.0663340;01:10:29.0663340;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:35.6065822;00:00:00;02:00:00;00:24:53.6032977;00:45:06.4086680;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:21:56.1680252 [PrintingService.cs@1918] -06/15/2026 22:41:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=146.33333333333331,printChamber1=146.33333333333331,printChamber2=146.33333333333331,printChamber3=146.33333333333331,printChamber4=146.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:41:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.75 [HeaterCheck.cs@67] -06/15/2026 22:42:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=135.75 that are outside of set tolerance 10 for current step target 146.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:42:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268609, estimate=36.939026813198474 for layer 55, Z=5.501 [PrintingService.cs@1524] -06/15/2026 22:42:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 38, island count 5 [PrintingService.cs@1569] -06/15/2026 22:42:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 56, start=0, count=232, Z=5.601 [PrintingService.cs@1518] -06/15/2026 22:42:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2093304. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:42:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:42:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:42:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:42:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1502.094914, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.638636098876659, Elapsed = 00:25:02.1068915, TimeTotal = 06:17:06.7394255, Remaining = 05:52:04.6325340, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:37.6871998, WeightTotalEstimate = 01:10:37.6871998, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:44.2274480, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:02.1068915, HeatingEstimate = 00:44:57.9050860, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:04.7888910, WeightEstimate = 01:10:37.6871998 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:42:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.638636098876659;StartedAtUtc;00:25:02.1068915;06:17:06.7394255;05:52:04.6325340;False;232;0;0;00:00:00;01:10:37.6871998;01:10:37.6871998;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:44.2274480;00:00:00;02:00:00;00:25:02.1068915;00:44:57.9050860;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:04.7888910 [PrintingService.cs@1918] -06/15/2026 22:42:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=147.33333333333331,printChamber1=147.33333333333331,printChamber2=147.33333333333331,printChamber3=147.33333333333331,printChamber4=147.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:42:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.75 [HeaterCheck.cs@67] -06/15/2026 22:42:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 147.33333 with temperature 142.5 [HeaterCheck.cs@67] -06/15/2026 22:42:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 147.33333 with temperature 142.5 [HeaterCheck.cs@67] -06/15/2026 22:42:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 147.33333 with temperature 142.5 [HeaterCheck.cs@67] -06/15/2026 22:42:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 147.33333 with temperature 137.75 [HeaterCheck.cs@111] -06/15/2026 22:42:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 147.33333 with temperature 144 [HeaterCheck.cs@67] -06/15/2026 22:42:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 147.33333 with temperature 142.5 [HeaterCheck.cs@67] -06/15/2026 22:42:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:42:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 147.33333 with temperature 142.5 [HeaterCheck.cs@67] -06/15/2026 22:42:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 147.33333 with temperature 143.5 [HeaterCheck.cs@67] -06/15/2026 22:42:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 147.33333 with temperature 142.5 [HeaterCheck.cs@67] -06/15/2026 22:42:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=136.75 that are outside of set tolerance 10 for current step target 147.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:42:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 147.33333 with temperature 142.5 [HeaterCheck.cs@67] -06/15/2026 22:42:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1510.5958824, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.676206541942673, Elapsed = 00:25:10.6078576, TimeTotal = 06:17:06.7394232, Remaining = 05:51:56.1315656, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:37.6871998, WeightTotalEstimate = 01:10:37.6871998, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:44.2274480, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:10.6078576, HeatingEstimate = 00:44:49.4041176, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:04.7888910, WeightEstimate = 01:10:37.6871998 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:42:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.676206541942673;StartedAtUtc;00:25:10.6078576;06:17:06.7394232;05:51:56.1315656;False;232;0;0;00:00:00;01:10:37.6871998;01:10:37.6871998;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:44.2274480;00:00:00;02:00:00;00:25:10.6078576;00:44:49.4041176;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:04.7888910 [PrintingService.cs@1918] -06/15/2026 22:42:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=148.33333333333331,printChamber1=148.33333333333331,printChamber2=148.33333333333331,printChamber3=148.33333333333331,printChamber4=148.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:42:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 148.33333 with temperature 143 [HeaterCheck.cs@88] -06/15/2026 22:42:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 148.33333 with temperature 142 [HeaterCheck.cs@88] -06/15/2026 22:42:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 148.33333 with temperature 143.75 [HeaterCheck.cs@67] -06/15/2026 22:42:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58.333332 with temperature 45.5 [HeaterCheck.cs@111] -06/15/2026 22:42:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 148.33333 with temperature 144.25 [HeaterCheck.cs@67] -06/15/2026 22:42:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 148.33333 with temperature 143.5 [HeaterCheck.cs@67] -06/15/2026 22:42:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 148.33333 with temperature 143.39285278320312 [HeaterCheck.cs@67] -06/15/2026 22:42:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 148.33333 with temperature 143.42857360839844 [HeaterCheck.cs@67] -06/15/2026 22:42:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 148.33333 with temperature 145.25 [HeaterCheck.cs@67] -06/15/2026 22:42:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.75 [HeaterCheck.cs@67] -06/15/2026 22:42:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.5607147216797, Elapsed=00:00:27.2014632 [ControlledHeating.cs@486] -06/15/2026 22:42:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1518.0951025, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.7093496702477395, Elapsed = 00:25:18.1070661, TimeTotal = 06:17:06.7394116, Remaining = 05:51:48.6323455, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:37.6871998, WeightTotalEstimate = 01:10:37.6871998, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:44.2274480, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:18.1070661, HeatingEstimate = 00:44:41.9048975, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:04.7888910, WeightEstimate = 01:10:37.6871998 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:42:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.7093496702477395;StartedAtUtc;00:25:18.1070661;06:17:06.7394116;05:51:48.6323455;False;232;0;0;00:00:00;01:10:37.6871998;01:10:37.6871998;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:44.2274480;00:00:00;02:00:00;00:25:18.1070661;00:44:41.9048975;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:04.7888910 [PrintingService.cs@1918] -06/15/2026 22:42:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=149.33333333333331,printChamber1=149.33333333333331,printChamber2=149.33333333333331,printChamber3=149.33333333333331,printChamber4=149.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:42:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 149.33333 with temperature 143.39285278320312 [HeaterCheck.cs@88] -06/15/2026 22:42:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 149.33333 with temperature 144.5 [HeaterCheck.cs@67] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.49020385742188 after 00:00:30.2021009 [ControlledHeating.cs@493] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2296654. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634055. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2948978. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3056094. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:42:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 200165634329 (200165634329 @ 0) for mcu = 1653.470141 [15/06/2026 21:30:40] (1668.0469527416667 sec) to 202578394442 (from now=202458394442, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 200165634329 (200165634329 @ 0) for mcu = 1653.470141 [15/06/2026 21:30:40] (1668.0469527416667 sec) to 202578394442 (from external timestamp, flags=None, requested=202578394442 (202578394442 @ 0) for mcu = 1673.576829 [15/06/2026 21:31:00] (1688.1532870166666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 200165634329 (200165634329 @ 0) for mcu = 1653.470141 [15/06/2026 21:30:40] (1668.0469527416667 sec) to 202578394442 (from external timestamp, flags=None, requested=202578394442 (202578394442 @ 0) for mcu = 1673.576829 [15/06/2026 21:31:00] (1688.1532870166666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:42:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 149.33333 with temperature 144.5 [HeaterCheck.cs@67] -06/15/2026 22:42:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 149.33333 with temperature 146 [HeaterCheck.cs@67] -06/15/2026 22:42:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1525.594914, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.742495454760587, Elapsed = 00:25:25.6068763, TimeTotal = 06:17:06.7394103, Remaining = 05:51:41.1325340, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:37.6871998, WeightTotalEstimate = 01:10:37.6871998, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:44.2274480, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:25.6068763, HeatingEstimate = 00:44:34.4050860, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:04.7888910, WeightEstimate = 01:10:37.6871998 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:42:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.742495454760587;StartedAtUtc;00:25:25.6068763;06:17:06.7394103;05:51:41.1325340;False;232;0;0;00:00:00;01:10:37.6871998;01:10:37.6871998;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:44.2274480;00:00:00;02:00:00;00:25:25.6068763;00:44:34.4050860;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:04.7888910 [PrintingService.cs@1918] -06/15/2026 22:42:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=150.33333333333331,printChamber1=150.33333333333331,printChamber2=150.33333333333331,printChamber3=150.33333333333331,printChamber4=150.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:42:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.333332 with temperature 56 [HeaterCheck.cs@67] -06/15/2026 22:42:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:33 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (325 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:42:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9936949. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:42:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9936949. Loops = 44. GC duration = 00:00:00.2922555. SinceCollect=00:01:00.7083219. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:42:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3674, gen1=932, gen2=47, LatencyMode=Interactive, FreeMemory=5914722304, Live=441464968, HeapSizeBytes=469129560, FragmentedBytes=28110160, TotalCommittedBytes=478494720, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:42:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:42:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:42:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1533.098128, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.775656281327298, Elapsed = 00:25:33.1100901, TimeTotal = 06:17:06.7394101, Remaining = 05:51:33.6293200, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:37.6871998, WeightTotalEstimate = 01:10:37.6871998, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:44.2274480, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:33.1100901, HeatingEstimate = 00:44:26.9018720, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:04.7888910, WeightEstimate = 01:10:37.6871998 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:42:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.775656281327298;StartedAtUtc;00:25:33.1100901;06:17:06.7394101;05:51:33.6293200;False;232;0;0;00:00:00;01:10:37.6871998;01:10:37.6871998;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:44.2274480;00:00:00;02:00:00;00:25:33.1100901;00:44:26.9018720;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:04.7888910 [PrintingService.cs@1918] -06/15/2026 22:42:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=151.33333333333331,printChamber1=151.33333333333331,printChamber2=151.33333333333331,printChamber3=151.33333333333331,printChamber4=151.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:42:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:42:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203027, estimate=37.70393934674891 for layer 56, Z=5.601 [PrintingService.cs@1524] -06/15/2026 22:42:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 39, island count 5 [PrintingService.cs@1569] -06/15/2026 22:42:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 57, start=0, count=232, Z=5.701 [PrintingService.cs@1518] -06/15/2026 22:42:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:42:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 151.33333 with temperature 146.35714721679688 [HeaterCheck.cs@67] -06/15/2026 22:42:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 151.33333 with temperature 146.35714721679688 [HeaterCheck.cs@67] -06/15/2026 22:42:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 151.33333 with temperature 146.39285278320312 [HeaterCheck.cs@67] -06/15/2026 22:42:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 151.33333 with temperature 146.4642791748047 [HeaterCheck.cs@67] -06/15/2026 22:42:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1540.6027381, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.807858969281745, Elapsed = 00:25:40.6176129, TimeTotal = 06:17:09.9871935, Remaining = 05:51:29.3695806, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:40.9320705, WeightTotalEstimate = 01:10:40.9320705, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:47.4723187, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:40.6176129, HeatingEstimate = 00:44:19.3972619, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:08.0337617, WeightEstimate = 01:10:40.9320705 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:42:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.807858969281745;StartedAtUtc;00:25:40.6176129;06:17:09.9871935;05:51:29.3695806;False;232;0;0;00:00:00;01:10:40.9320705;01:10:40.9320705;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:47.4723187;00:00:00;02:00:00;00:25:40.6176129;00:44:19.3972619;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:08.0337617 [PrintingService.cs@1918] -06/15/2026 22:42:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=152.33333333333331,printChamber1=152.33333333333331,printChamber2=152.33333333333331,printChamber3=152.33333333333331,printChamber4=152.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:42:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 152.33333 with temperature 146.32142639160156 [HeaterCheck.cs@88] -06/15/2026 22:42:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:42:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54.25 [HeaterCheck.cs@67] -06/15/2026 22:42:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 152.33333 with temperature 147.39285278320312 [HeaterCheck.cs@67] -06/15/2026 22:42:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:42:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54.25 [HeaterCheck.cs@67] -06/15/2026 22:42:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1646713 ~ 6 samples/sec, 2 resets, 3 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:42:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1548.1104295, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 6.841022833966846, Elapsed = 00:25:48.1223920, TimeTotal = 06:17:09.9842812, Remaining = 05:51:21.8618892, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:40.9320705, WeightTotalEstimate = 01:10:40.9320705, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:47.4723187, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:48.1223920, HeatingEstimate = 00:44:11.8895705, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:08.0337617, WeightEstimate = 01:10:40.9320705 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:42:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.841022833966846;StartedAtUtc;00:25:48.1223920;06:17:09.9842812;05:51:21.8618892;False;232;0;0;00:00:00;01:10:40.9320705;01:10:40.9320705;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:47.4723187;00:00:00;02:00:00;00:25:48.1223920;00:44:11.8895705;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:08.0337617 [PrintingService.cs@1918] -06/15/2026 22:42:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=153.33333333333331,printChamber1=153.33333333333331,printChamber2=153.33333333333331,printChamber3=153.33333333333331,printChamber4=153.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:42:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.07618713378906, Elapsed=00:00:27.4992581 [ControlledHeating.cs@486] -06/15/2026 22:42:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.93698120117188 after 00:00:30.4994919 [ControlledHeating.cs@493] -06/15/2026 22:42:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0237374. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:42:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633273. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0849862. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0977538. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:42:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 203789915670 (203789915670 @ 0) for mcu = 1683.673128 [15/06/2026 21:31:10] (1698.24929725 sec) to 206238368269 (from now=206118368269, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 203789915670 (203789915670 @ 0) for mcu = 1683.673128 [15/06/2026 21:31:10] (1698.24929725 sec) to 206238368269 (from external timestamp, flags=None, requested=206238368269 (206238368269 @ 0) for mcu = 1704.077295 [15/06/2026 21:31:31] (1718.6530689083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 203789915670 (203789915670 @ 0) for mcu = 1683.673128 [15/06/2026 21:31:10] (1698.24929725 sec) to 206238368269 (from external timestamp, flags=None, requested=206238368269 (206238368269 @ 0) for mcu = 1704.077295 [15/06/2026 21:31:31] (1718.6530689083334 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:42:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:42:57 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=143,printChamber3=141.25 that are outside of set tolerance 10 for current step target 153.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:43:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2076325. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:43:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:43:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:43:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.333332 with temperature 54 [HeaterCheck.cs@67] -06/15/2026 22:43:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:43:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.333332 with temperature 53.5 [HeaterCheck.cs@67] -06/15/2026 22:43:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=59.33333333333333,powderChamber1=59.33333333333333,powderChamber2=59.33333333333333,powderChamber3=59.33333333333333,powderChamber4=59.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:43:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268622, estimate=37.15100389013614 for layer 57, Z=5.701 [PrintingService.cs@1524] -06/15/2026 22:43:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 59.333332 with temperature 54.25 [HeaterCheck.cs@88] -06/15/2026 22:43:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 40, island count 5 [PrintingService.cs@1569] -06/15/2026 22:43:15 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 58, start=0, count=232, Z=5.801 [PrintingService.cs@1518] -06/15/2026 22:43:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:43:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55.75 [HeaterCheck.cs@67] -06/15/2026 22:43:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.33333 with temperature 149 [HeaterCheck.cs@67] -06/15/2026 22:43:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.33333 with temperature 148.5 [HeaterCheck.cs@67] -06/15/2026 22:43:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:43:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 153.33333 with temperature 148.75 [HeaterCheck.cs@67] -06/15/2026 22:43:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.04827880859375, Elapsed=00:00:27.2039402 [ControlledHeating.cs@486] -06/15/2026 22:43:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 59.333332 with temperature 46.25 [HeaterCheck.cs@111] -06/15/2026 22:43:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:43:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:43:22 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=48.5 that are outside of set tolerance 10 for current step target 59.33333333333333 and final target 145 [ControlledHeating.cs@205] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.1725311279297 after 00:00:30.2066314 [ControlledHeating.cs@493] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2296014. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0622003. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2935981. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3069119. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:43:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 207449889497 (207449889497 @ 0) for mcu = 1714.173502 [15/06/2026 21:31:41] (1728.7490791416667 sec) to 209863411838 (from now=209743411838, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 207449889497 (207449889497 @ 0) for mcu = 1714.173502 [15/06/2026 21:31:41] (1728.7490791416667 sec) to 209863411838 (from external timestamp, flags=None, requested=209863411838 (209863411838 @ 0) for mcu = 1734.286580 [15/06/2026 21:32:01] (1748.8617653166666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 207449889497 (207449889497 @ 0) for mcu = 1714.173502 [15/06/2026 21:31:41] (1728.7490791416667 sec) to 209863411838 (from external timestamp, flags=None, requested=209863411838 (209863411838 @ 0) for mcu = 1734.286580 [15/06/2026 21:32:01] (1748.8617653166666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:43:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 153.33333 with temperature 148.75 [HeaterCheck.cs@67] -06/15/2026 22:43:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:43:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 153.33333 with temperature 148.5 [HeaterCheck.cs@67] -06/15/2026 22:43:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 153.33333 with temperature 149 [HeaterCheck.cs@67] -06/15/2026 22:43:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 153.33333 with temperature 149.25 [HeaterCheck.cs@67] -06/15/2026 22:43:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:43:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9865448. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:43:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 153.33333 with temperature 148.75 [HeaterCheck.cs@67] -06/15/2026 22:43:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (172 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:43:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9865448. Loops = 44. GC duration = 00:00:00.2905270. SinceCollect=00:01:00.7043884. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:43:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3779, gen1=940, gen2=48, LatencyMode=Interactive, FreeMemory=5908824064, Live=441367672, HeapSizeBytes=469131224, FragmentedBytes=28067672, TotalCommittedBytes=478494720, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:43:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:43:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:43:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55 [HeaterCheck.cs@67] -06/15/2026 22:43:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 153.33333 with temperature 149 [HeaterCheck.cs@67] -06/15/2026 22:43:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203042, estimate=37.96497966491817 for layer 58, Z=5.801 [PrintingService.cs@1524] -06/15/2026 22:43:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 41, island count 5 [PrintingService.cs@1569] -06/15/2026 22:43:43 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 59, start=0, count=232, Z=5.901 [PrintingService.cs@1518] -06/15/2026 22:43:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:43:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55.25 [HeaterCheck.cs@67] -06/15/2026 22:43:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1605.6466522, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 7.092903991941407, Elapsed = 00:26:45.6586814, TimeTotal = 06:17:17.5358136, Remaining = 05:50:31.8771322, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:48.4835362, WeightTotalEstimate = 01:10:48.4835362, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:55.0237844, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:26:45.6586814, HeatingEstimate = 00:43:14.3533478, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:15.5852274, WeightEstimate = 01:10:48.4835362 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:43:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.092903991941407;StartedAtUtc;00:26:45.6586814;06:17:17.5358136;05:50:31.8771322;False;232;0;0;00:00:00;01:10:48.4835362;01:10:48.4835362;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:55.0237844;00:00:00;02:00:00;00:26:45.6586814;00:43:14.3533478;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:15.5852274 [PrintingService.cs@1918] -06/15/2026 22:43:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=154.33333333333331,printChamber1=154.33333333333331,printChamber2=154.33333333333331,printChamber3=154.33333333333331,printChamber4=154.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:43:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0275116 ~ 5.95 samples/sec, 2 resets, 3 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:43:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:43:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.2764892578125, Elapsed=00:00:27.4886915 [ControlledHeating.cs@486] -06/15/2026 22:43:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55.25 [HeaterCheck.cs@67] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.2103729248047 after 00:00:30.4914250 [ControlledHeating.cs@493] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0167552. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633776. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0871571. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0981244. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:43:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 211074933066 (211074933066 @ 0) for mcu = 1744.382735 [15/06/2026 21:32:11] (1758.95777555 sec) to 213523011595 (from now=213403011595, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 211074933066 (211074933066 @ 0) for mcu = 1744.382735 [15/06/2026 21:32:11] (1758.95777555 sec) to 213523011595 (from external timestamp, flags=None, requested=213523011595 (213523011595 @ 0) for mcu = 1764.783772 [15/06/2026 21:32:31] (1779.3584299583333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 211074933066 (211074933066 @ 0) for mcu = 1744.382735 [15/06/2026 21:32:11] (1758.95777555 sec) to 213523011595 (from external timestamp, flags=None, requested=213523011595 (213523011595 @ 0) for mcu = 1764.783772 [15/06/2026 21:32:31] (1779.3584299583333 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:43:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:43:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55 [HeaterCheck.cs@67] -06/15/2026 22:43:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=143.5 that are outside of set tolerance 10 for current step target 154.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:43:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1614.1470711, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 7.130453822756865, Elapsed = 00:26:54.1590330, TimeTotal = 06:17:17.5357463, Remaining = 05:50:23.3767133, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:10:48.4835362, WeightTotalEstimate = 01:10:48.4835362, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:06:55.0237844, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:26:54.1590330, HeatingEstimate = 00:43:05.8529289, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:15.5852274, WeightEstimate = 01:10:48.4835362 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:43:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.130453822756865;StartedAtUtc;00:26:54.1590330;06:17:17.5357463;05:50:23.3767133;False;232;0;0;00:00:00;01:10:48.4835362;01:10:48.4835362;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:06:55.0237844;00:00:00;02:00:00;00:26:54.1590330;00:43:05.8529289;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:15.5852274 [PrintingService.cs@1918] -06/15/2026 22:43:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=155.33333333333331,printChamber1=155.33333333333331,printChamber2=155.33333333333331,printChamber3=155.33333333333331,printChamber4=155.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:43:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55 [HeaterCheck.cs@67] -06/15/2026 22:43:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55 [HeaterCheck.cs@67] -06/15/2026 22:44:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=145,printChamber4=144.5 that are outside of set tolerance 10 for current step target 155.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:44:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2051265. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:44:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:44:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:44:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 59.333332 with temperature 55 [HeaterCheck.cs@67] -06/15/2026 22:44:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 59.333332 with temperature 54.39285659790039 [HeaterCheck.cs@67] -06/15/2026 22:44:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55.25 [HeaterCheck.cs@67] -06/15/2026 22:44:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 59.333332 with temperature 54.92856979370117 [HeaterCheck.cs@67] -06/15/2026 22:44:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 59.333332 with temperature 55.21428680419922 [HeaterCheck.cs@67] -06/15/2026 22:44:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 59.333332 with temperature 55.21428680419922 [HeaterCheck.cs@67] -06/15/2026 22:44:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 155.33333 with temperature 150.75 [HeaterCheck.cs@67] -06/15/2026 22:44:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 155.33333 with temperature 150.5 [HeaterCheck.cs@67] -06/15/2026 22:44:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 59.333332 with temperature 55.14285659790039 [HeaterCheck.cs@67] -06/15/2026 22:44:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=268615, estimate=37.09436849319742 for layer 59, Z=5.901 [PrintingService.cs@1524] -06/15/2026 22:44:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 42, island count 5 [PrintingService.cs@1569] -06/15/2026 22:44:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 60, start=0, count=232, Z=6.001 [PrintingService.cs@1518] -06/15/2026 22:44:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 81, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:44:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.0620574951172, Elapsed=00:00:27.2067348 [ControlledHeating.cs@486] -06/15/2026 22:44:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.333332 with temperature 55.25 [HeaterCheck.cs@67] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155.33333 with temperature 152 [HeaterCheck.cs@67] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.13958740234375 after 00:00:30.2050318 [ControlledHeating.cs@493] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2220817. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629715. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2863214. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2976779. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:44:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 214734532823 (214734532823 @ 0) for mcu = 1774.879922 [15/06/2026 21:32:41] (1789.4544401916667 sec) to 217146711815 (from now=217026711815, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 214734532823 (214734532823 @ 0) for mcu = 1774.879922 [15/06/2026 21:32:41] (1789.4544401916667 sec) to 217146711815 (from external timestamp, flags=None, requested=217146711815 (217146711815 @ 0) for mcu = 1794.981775 [15/06/2026 21:33:02] (1809.5559317916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 214734532823 (214734532823 @ 0) for mcu = 1774.879922 [15/06/2026 21:32:41] (1789.4544401916667 sec) to 217146711815 (from external timestamp, flags=None, requested=217146711815 (217146711815 @ 0) for mcu = 1794.981775 [15/06/2026 21:33:02] (1809.5559317916666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:44:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 59.333332 with temperature 47.5 [HeaterCheck.cs@111] -06/15/2026 22:44:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:44:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155.33333 with temperature 150.5 [HeaterCheck.cs@67] -06/15/2026 22:44:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 155.33333 with temperature 150.4642791748047 [HeaterCheck.cs@67] -06/15/2026 22:44:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] -06/15/2026 22:44:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2851869. SinceCollect=00:01:00.6913417. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] -06/15/2026 22:44:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3890, gen1=955, gen2=49, LatencyMode=Interactive, FreeMemory=5930909696, Live=441131008, HeapSizeBytes=468953584, FragmentedBytes=28058384, TotalCommittedBytes=477167616, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] -06/15/2026 22:44:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:44:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:44:35 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (231 cases) [SoftAnalysisSurfaceHeater.cs@800] -06/15/2026 22:44:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155.33333 with temperature 150.75 [HeaterCheck.cs@67] -06/15/2026 22:44:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 155.33333 with temperature 150.5 [HeaterCheck.cs@67] -06/15/2026 22:44:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 57.5 [HeaterCheck.cs@67] -06/15/2026 22:44:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:44:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:44:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 155.33333 with temperature 145.75 [HeaterCheck.cs@111] -06/15/2026 22:44:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1662.706186, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 7.341216858504926, Elapsed = 00:27:42.7181504, TimeTotal = 06:17:29.0809691, Remaining = 05:49:46.3628187, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:00.0287565, WeightTotalEstimate = 01:11:00.0287565, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:06.5690047, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:42.7181504, HeatingEstimate = 00:42:17.2938140, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:27.1304477, WeightEstimate = 01:11:00.0287565 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:44:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.341216858504926;StartedAtUtc;00:27:42.7181504;06:17:29.0809691;05:49:46.3628187;False;232;0;0;00:00:00;01:11:00.0287565;01:11:00.0287565;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:06.5690047;00:00:00;02:00:00;00:27:42.7181504;00:42:17.2938140;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:27.1304477 [PrintingService.cs@1918] -06/15/2026 22:44:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=156.33333333333331,printChamber1=156.33333333333331,printChamber2=156.33333333333331,printChamber3=156.33333333333331,printChamber4=156.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:44:44 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] -06/15/2026 22:44:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:44:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] -06/15/2026 22:44:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] -06/15/2026 22:44:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] -06/15/2026 22:44:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] -06/15/2026 22:44:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] -06/15/2026 22:44:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0793009 ~ 5.99 samples/sec, 2 resets, 3 ignored frames) [Mlx90640Camera.cs@313] -06/15/2026 22:44:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=203032, estimate=37.769401853053225 for layer 60, Z=6.001 [PrintingService.cs@1524] -06/15/2026 22:44:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 43, island count 5 [PrintingService.cs@1569] -06/15/2026 22:44:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 61, start=0, count=232, Z=6.101 [PrintingService.cs@1518] -06/15/2026 22:44:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 80, instances=15 (object-per-object) [PrintingService.cs@263] -06/15/2026 22:44:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:44:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:44:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.93130493164062, Elapsed=00:00:27.4922837 [ControlledHeating.cs@486] -06/15/2026 22:44:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:51 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=145.75 that are outside of set tolerance 10 for current step target 156.33333333333331 and final target 172 [ControlledHeating.cs@205] -06/15/2026 22:44:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1671.2063728, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 7.377375072949914, Elapsed = 00:27:51.2183380, TimeTotal = 06:17:33.2922818, Remaining = 05:49:42.0739438, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:04.2400684, WeightTotalEstimate = 01:11:04.2400684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:10.7803166, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:51.2183380, HeatingEstimate = 00:42:08.7936272, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:31.3417596, WeightEstimate = 01:11:04.2400684 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:44:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.377375072949914;StartedAtUtc;00:27:51.2183380;06:17:33.2922818;05:49:42.0739438;False;232;0;0;00:00:00;01:11:04.2400684;01:11:04.2400684;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:10.7803166;00:00:00;02:00:00;00:27:51.2183380;00:42:08.7936272;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:31.3417596 [PrintingService.cs@1918] -06/15/2026 22:44:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=157.33333333333331,printChamber1=157.33333333333331,printChamber2=157.33333333333331,printChamber3=157.33333333333331,printChamber4=157.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.03903198242188 after 00:00:30.4963729 [ControlledHeating.cs@493] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0291895. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633787. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0941056. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1101699. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:44:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 218358233043 (218358233043 @ 0) for mcu = 1805.078021 [15/06/2026 21:33:12] (1819.651942025 sec) to 220807253525 (from now=220687253525, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 218358233043 (218358233043 @ 0) for mcu = 1805.078021 [15/06/2026 21:33:12] (1819.651942025 sec) to 220807253525 (from external timestamp, flags=None, requested=220807253525 (220807253525 @ 0) for mcu = 1825.486909 [15/06/2026 21:33:32] (1840.0604460416666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 218358233043 (218358233043 @ 0) for mcu = 1805.078021 [15/06/2026 21:33:12] (1819.651942025 sec) to 220807253525 (from external timestamp, flags=None, requested=220807253525 (220807253525 @ 0) for mcu = 1825.486909 [15/06/2026 21:33:32] (1840.0604460416666 sec), advance=0) [McuStepper.cs@843] -06/15/2026 22:44:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] -06/15/2026 22:44:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:44:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 55 [HeaterCheck.cs@67] -06/15/2026 22:45:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1678.7098744, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 7.410498290502229, Elapsed = 00:27:58.7218371, TimeTotal = 06:17:33.2922793, Remaining = 05:49:34.5704422, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:04.2400684, WeightTotalEstimate = 01:11:04.2400684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:10.7803166, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:58.7218371, HeatingEstimate = 00:42:01.2901256, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:31.3417596, WeightEstimate = 01:11:04.2400684 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] -06/15/2026 22:45:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 7.410498290502229;StartedAtUtc;00:27:58.7218371;06:17:33.2922793;05:49:34.5704422;False;232;0;0;00:00:00;01:11:04.2400684;01:11:04.2400684;00:00:00;00:00:00;00:00:00;00:00:15.4788866;00:00:00;00:00:00.0274208;03:07:10.7803166;00:00:00;02:00:00;00:27:58.7218371;00:42:01.2901256;00:00:07.5000000;00:00:15;174;00:00:00;00:40:02.2552580;00:00:00;00:04:37.1832990;00:00:00;02:22:31.3417596 [PrintingService.cs@1918] -06/15/2026 22:45:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=158.33333333333331,printChamber1=158.33333333333331,printChamber2=158.33333333333331,printChamber3=158.33333333333331,printChamber4=158.33333333333331 [ControlledHeating.cs@169] -06/15/2026 22:45:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:45:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.5 [HeaterCheck.cs@67] -06/15/2026 22:45:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:45:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 158.33333 with temperature 153.5 [HeaterCheck.cs@67] -06/15/2026 22:45:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.333332 with temperature 54.75 [HeaterCheck.cs@67] -06/15/2026 22:45:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 158.33333 with temperature 153.5 [HeaterCheck.cs@67] -06/15/2026 22:45:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=60.33333333333333,powderChamber1=60.33333333333333,powderChamber2=60.33333333333333,powderChamber3=60.33333333333333,powderChamber4=60.33333333333333 [ControlledHeating.cs@169] -06/15/2026 22:45:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.333332 with temperature 56 [HeaterCheck.cs@67] -06/15/2026 22:45:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9866833. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2197083. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] -06/15/2026 22:45:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] -06/15/2026 22:45:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] -06/15/2026 22:45:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 158.33333 with temperature 153.5 [HeaterCheck.cs@67] -06/15/2026 22:45:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 158.33333 with temperature 153.75 [HeaterCheck.cs@67] -06/15/2026 22:45:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1686.2100423, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 15/06/2026 21:16:59, Progress = 7.443607139987169, Elapsed = 00:28:06.2220877, TimeTotal = 06:17:33.2923620, Remaining = 05:49:27.0702743, Incomplete = False, SoftCount = 232, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:11:04.2400684, WeightTotalEstimate = 01:11:04.2400684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4788866, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0274208, TimeLayers = 03:07:10.7803166, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:28:06.2220877, HeatingEstimate = 00:41:53.7899577, HeatingEstimate2 = 00:00:07.5000000, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:02.2552580, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:37.1832990, JobElapsed = 00:00:00, JobTotal = 02:22:31.3417596, WeightEstimate = 01:11:04.2400684 }, JobName = D790 and D638 Recycled Powder 2026_06_13 }. UTC calculatedEstimate: 06/16/2026 03:34:34. coolingEstimate=02:00:00 [PrintingService.cs@1912] +06/28/2026 14:07:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:07:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=114,printChamber4=113.75 that are outside of set tolerance 10 for current step target 124.04166666666667 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:07:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:07:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1055.6809639, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.6733204955088863, Elapsed = 00:17:35.6939968, TimeTotal = 17:31:29.7667024, Remaining = 17:13:54.0727056, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:02.7432849, WeightTotalEstimate = 08:03:02.7432849, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:06:45.3730885, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:21.8805810, HeatingElapsed = 00:17:35.6939968, HeatingEstimate = 00:52:24.3190361, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:22:54.7511015, WeightEstimate = 08:03:02.7432849 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:21:29. coolingEstimate=04:14:21.8805810 [PrintingService.cs@1912] +06/28/2026 14:07:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6733204955088863;StartedAtUtc;00:17:35.6939968;17:31:29.7667024;17:13:54.0727056;False;661;0;0;00:00:00;08:03:02.7432849;08:03:02.7432849;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:06:45.3730885;00:00:00;04:14:21.8805810;00:17:35.6939968;00:52:24.3190361;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:22:54.7511015 [PrintingService.cs@1918] +06/28/2026 14:07:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=125.04166666666667,printChamber1=125.04166666666667,printChamber2=125.04166666666667,printChamber3=125.04166666666667,printChamber4=125.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:07:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 125.041664 with temperature 119.25 [HeaterCheck.cs@88] +06/28/2026 14:07:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:07:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 125.041664 with temperature 120.07142639160156 [HeaterCheck.cs@67] +06/28/2026 14:07:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:07:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 125.041664 with temperature 120.14286041259766 [HeaterCheck.cs@67] +06/28/2026 14:07:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 125.041664 with temperature 120.07142639160156 [HeaterCheck.cs@67] +06/28/2026 14:07:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 125.041664 with temperature 120.14286041259766 [HeaterCheck.cs@67] +06/28/2026 14:07:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 125.041664 with temperature 116.5 [HeaterCheck.cs@111] +06/28/2026 14:07:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=115 that are outside of set tolerance 10 for current step target 125.04166666666667 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:07:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.63943481445312, Elapsed=00:00:30.4885838 [ControlledHeating.cs@486] +06/28/2026 14:07:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.63943481445312 after 00:00:30.4886383 [ControlledHeating.cs@493] +06/28/2026 14:07:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:07:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0114897. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:07:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630352. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0752083. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0862640. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:07:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 219332818860 (219332818860 @ 0) for mcu = 1813.182476 [28/06/2026 12:21:24] (1827.7734905 sec) to 221779613350 (from now=221659613350, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 219332818860 (219332818860 @ 0) for mcu = 1813.182476 [28/06/2026 12:21:24] (1827.7734905 sec) to 221779613350 (from external timestamp, flags=None, requested=221779613350 (221779613350 @ 0) for mcu = 1833.572825 [28/06/2026 12:21:44] (1848.1634445833333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 219332818860 (219332818860 @ 0) for mcu = 1813.182476 [28/06/2026 12:21:24] (1827.7734905 sec) to 221779613350 (from external timestamp, flags=None, requested=221779613350 (221779613350 @ 0) for mcu = 1833.572825 [28/06/2026 12:21:44] (1848.1634445833333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1062.6840048, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.6844206166105724, Elapsed = 00:17:42.6970373, TimeTotal = 17:31:29.7667020, Remaining = 17:13:47.0696647, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:02.7432849, WeightTotalEstimate = 08:03:02.7432849, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:06:45.3730885, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:21.8805810, HeatingElapsed = 00:17:42.6970373, HeatingEstimate = 00:52:17.3159952, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:22:54.7511015, WeightEstimate = 08:03:02.7432849 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:21:29. coolingEstimate=04:14:21.8805810 [PrintingService.cs@1912] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6844206166105724;StartedAtUtc;00:17:42.6970373;17:31:29.7667020;17:13:47.0696647;False;661;0;0;00:00:00;08:03:02.7432849;08:03:02.7432849;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:06:45.3730885;00:00:00;04:14:21.8805810;00:17:42.6970373;00:52:17.3159952;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:22:54.7511015 [PrintingService.cs@1918] +06/28/2026 14:07:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=126.04166666666667,printChamber1=126.04166666666667,printChamber2=126.04166666666667,printChamber3=126.04166666666667,printChamber4=126.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:07:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:07:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 50.5 [HeaterCheck.cs@67] +06/28/2026 14:07:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 126.041664 with temperature 121.5 [HeaterCheck.cs@67] +06/28/2026 14:07:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:07:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1068.6838973, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.69393070175991, Elapsed = 00:17:48.6969278, TimeTotal = 17:31:29.7667000, Remaining = 17:13:41.0697722, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:02.7432849, WeightTotalEstimate = 08:03:02.7432849, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:06:45.3730885, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:21.8805810, HeatingElapsed = 00:17:48.6969278, HeatingEstimate = 00:52:11.3161027, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:22:54.7511015, WeightEstimate = 08:03:02.7432849 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:21:29. coolingEstimate=04:14:21.8805810 [PrintingService.cs@1912] +06/28/2026 14:07:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.69393070175991;StartedAtUtc;00:17:48.6969278;17:31:29.7667000;17:13:41.0697722;False;661;0;0;00:00:00;08:03:02.7432849;08:03:02.7432849;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:06:45.3730885;00:00:00;04:14:21.8805810;00:17:48.6969278;00:52:11.3161027;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:22:54.7511015 [PrintingService.cs@1918] +06/28/2026 14:07:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=127.04166666666667,printChamber1=127.04166666666667,printChamber2=127.04166666666667,printChamber3=127.04166666666667,printChamber4=127.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:07:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 127.041664 with temperature 122 [HeaterCheck.cs@88] +06/28/2026 14:07:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.041664 with temperature 122.25 [HeaterCheck.cs@67] +06/28/2026 14:07:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 127.041664 with temperature 122.75 [HeaterCheck.cs@67] +06/28/2026 14:07:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:07:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9960502. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1982463. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:07:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:07:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:07:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1074.6866587, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.7034459122738912, Elapsed = 00:17:54.7000582, TimeTotal = 17:31:29.7670690, Remaining = 17:13:35.0670108, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:02.7432849, WeightTotalEstimate = 08:03:02.7432849, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:06:45.3730885, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:21.8805810, HeatingElapsed = 00:17:54.7000582, HeatingEstimate = 00:52:05.3133413, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:22:54.7511015, WeightEstimate = 08:03:02.7432849 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:21:29. coolingEstimate=04:14:21.8805810 [PrintingService.cs@1912] +06/28/2026 14:07:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7034459122738912;StartedAtUtc;00:17:54.7000582;17:31:29.7670690;17:13:35.0670108;False;661;0;0;00:00:00;08:03:02.7432849;08:03:02.7432849;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:06:45.3730885;00:00:00;04:14:21.8805810;00:17:54.7000582;00:52:05.3133413;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:22:54.7511015 [PrintingService.cs@1918] +06/28/2026 14:07:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=128.04166666666669,printChamber1=128.04166666666669,printChamber2=128.04166666666669,printChamber3=128.04166666666669,printChamber4=128.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:08:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=117.25 that are outside of set tolerance 10 for current step target 128.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:08:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.75 [HeaterCheck.cs@67] +06/28/2026 14:08:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 50 [HeaterCheck.cs@67] +06/28/2026 14:08:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 128.04167 with temperature 124 [HeaterCheck.cs@67] +06/28/2026 14:08:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 51.75 [HeaterCheck.cs@67] +06/28/2026 14:08:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 128.04167 with temperature 123.25 [HeaterCheck.cs@67] +06/28/2026 14:08:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 50.25 [HeaterCheck.cs@67] +06/28/2026 14:08:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 128.04167 with temperature 123.25 [HeaterCheck.cs@67] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.64169311523438, Elapsed=00:00:30.2040865 [ControlledHeating.cs@486] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.64169311523438 after 00:00:30.2042190 [ControlledHeating.cs@493] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2160672. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630634. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2805181. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2915851. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:08:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 222991134578 (222991134578 @ 0) for mcu = 1843.669018 [28/06/2026 12:21:54] (1858.2594548166667 sec) to 225404191113 (from now=225284191113, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 222991134578 (222991134578 @ 0) for mcu = 1843.669018 [28/06/2026 12:21:54] (1858.2594548166667 sec) to 225404191113 (from external timestamp, flags=None, requested=225404191113 (225404191113 @ 0) for mcu = 1863.778213 [28/06/2026 12:22:14] (1878.368259275 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 222991134578 (222991134578 @ 0) for mcu = 1843.669018 [28/06/2026 12:21:54] (1858.2594548166667 sec) to 225404191113 (from external timestamp, flags=None, requested=225404191113 (225404191113 @ 0) for mcu = 1863.778213 [28/06/2026 12:22:14] (1878.368259275 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:08:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 50.25 [HeaterCheck.cs@67] +06/28/2026 14:08:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=436869, estimate=83.28473231404793 for layer 31, Z=3.101003 [PrintingService.cs@1524] +06/28/2026 14:08:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 23, island count 3 [PrintingService.cs@1569] +06/28/2026 14:08:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 32, start=0, count=661, Z=3.2010028 [PrintingService.cs@1518] +06/28/2026 14:08:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1021, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:08:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 128.04167 with temperature 123.14286041259766 [HeaterCheck.cs@67] +06/28/2026 14:08:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9803526. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:08:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (351 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:08:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9803526. Loops = 44. GC duration = 00:00:00.2963642. SinceCollect=00:01:00.7024817. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:08:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5255, gen1=1105, gen2=53, LatencyMode=Interactive, FreeMemory=5810552832, Live=489751552, HeapSizeBytes=555291064, FragmentedBytes=65901792, TotalCommittedBytes=568623104, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:08:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:08:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:08:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 50 [HeaterCheck.cs@67] +06/28/2026 14:08:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0403699 ~ 5.98 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:08:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.83445739746094, Elapsed=00:00:30.4999614 [ControlledHeating.cs@486] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.83445739746094 after 00:00:30.5002993 [ControlledHeating.cs@493] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0127831. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632635. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0762468. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0893907. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:08:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 226615712341 (226615712341 @ 0) for mcu = 1873.874377 [28/06/2026 12:22:24] (1888.4642695083332 sec) to 229064177372 (from now=228944177372, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 226615712341 (226615712341 @ 0) for mcu = 1873.874377 [28/06/2026 12:22:24] (1888.4642695083332 sec) to 229064177372 (from external timestamp, flags=None, requested=229064177372 (229064177372 @ 0) for mcu = 1894.278633 [28/06/2026 12:22:45] (1908.8681447666668 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 226615712341 (226615712341 @ 0) for mcu = 1873.874377 [28/06/2026 12:22:24] (1888.4642695083332 sec) to 229064177372 (from external timestamp, flags=None, requested=229064177372 (229064177372 @ 0) for mcu = 1894.278633 [28/06/2026 12:22:45] (1908.8681447666668 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:08:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.75 [HeaterCheck.cs@67] +06/28/2026 14:08:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1127.7003099, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.7865102075303518, Elapsed = 00:18:47.7184517, TimeTotal = 17:32:04.0978611, Remaining = 17:13:16.3794094, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:28.1699885, WeightTotalEstimate = 08:03:28.1699885, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:10.7997921, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:30.7799272, HeatingElapsed = 00:18:47.7184517, HeatingEstimate = 00:51:12.2996901, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:20.1778051, WeightEstimate = 08:03:28.1699885 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:03. coolingEstimate=04:14:30.7799272 [PrintingService.cs@1912] +06/28/2026 14:08:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7865102075303518;StartedAtUtc;00:18:47.7184517;17:32:04.0978611;17:13:16.3794094;False;661;0;0;00:00:00;08:03:28.1699885;08:03:28.1699885;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:10.7997921;00:00:00;04:14:30.7799272;00:18:47.7184517;00:51:12.2996901;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:20.1778051 [PrintingService.cs@1918] +06/28/2026 14:08:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=129.04166666666669,printChamber1=129.04166666666669,printChamber2=129.04166666666669,printChamber3=129.04166666666669,printChamber4=129.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:08:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 54.041668 with temperature 42.75 [HeaterCheck.cs@111] +06/28/2026 14:08:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:08:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 54.041668 with temperature 47 [HeaterCheck.cs@111] +06/28/2026 14:08:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=118.25 that are outside of set tolerance 10 for current step target 129.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:08:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9978283. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1968243. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:08:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:08:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:08:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1135.7136499, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.7992000883144799, Elapsed = 00:18:55.7287701, TimeTotal = 17:32:04.0948395, Remaining = 17:13:08.3660694, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:28.1699885, WeightTotalEstimate = 08:03:28.1699885, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:10.7997921, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:30.7799272, HeatingElapsed = 00:18:55.7287701, HeatingEstimate = 00:51:04.2863501, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:20.1778051, WeightEstimate = 08:03:28.1699885 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:03. coolingEstimate=04:14:30.7799272 [PrintingService.cs@1912] +06/28/2026 14:08:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7992000883144799;StartedAtUtc;00:18:55.7287701;17:32:04.0948395;17:13:08.3660694;False;661;0;0;00:00:00;08:03:28.1699885;08:03:28.1699885;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:10.7997921;00:00:00;04:14:30.7799272;00:18:55.7287701;00:51:04.2863501;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:20.1778051 [PrintingService.cs@1918] +06/28/2026 14:08:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=130.04166666666669,printChamber1=130.04166666666669,printChamber2=130.04166666666669,printChamber3=130.04166666666669,printChamber4=130.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:08:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 50.75 [HeaterCheck.cs@67] +06/28/2026 14:09:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 130.04167 with temperature 126 [HeaterCheck.cs@67] +06/28/2026 14:09:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=119.25 that are outside of set tolerance 10 for current step target 130.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:09:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 130.04167 with temperature 125.25 [HeaterCheck.cs@67] +06/28/2026 14:09:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 130.04167 with temperature 125.25 [HeaterCheck.cs@67] +06/28/2026 14:09:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.5 [HeaterCheck.cs@67] +06/28/2026 14:09:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.75 [HeaterCheck.cs@67] +06/28/2026 14:09:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 50.75 [HeaterCheck.cs@67] +06/28/2026 14:09:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=324912, estimate=75.94028223915979 for layer 32, Z=3.2010028 [PrintingService.cs@1524] +06/28/2026 14:09:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 24, island count 3 [PrintingService.cs@1569] +06/28/2026 14:09:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 33, start=0, count=661, Z=3.3010027 [PrintingService.cs@1518] +06/28/2026 14:09:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1037, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:09:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 49.75 [HeaterCheck.cs@67] +06/28/2026 14:09:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1147.7252805, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.8177815892400653, Elapsed = 00:19:07.7386114, TimeTotal = 17:32:19.5222723, Remaining = 17:13:11.7836609, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:39.5990419, WeightTotalEstimate = 08:03:39.5990419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:22.2288455, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:34.7800959, HeatingElapsed = 00:19:07.7386114, HeatingEstimate = 00:50:52.2747195, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:31.6068585, WeightEstimate = 08:03:39.5990419 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:19. coolingEstimate=04:14:34.7800959 [PrintingService.cs@1912] +06/28/2026 14:09:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8177815892400653;StartedAtUtc;00:19:07.7386114;17:32:19.5222723;17:13:11.7836609;False;661;0;0;00:00:00;08:03:39.5990419;08:03:39.5990419;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:22.2288455;00:00:00;04:14:34.7800959;00:19:07.7386114;00:50:52.2747195;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:31.6068585 [PrintingService.cs@1918] +06/28/2026 14:09:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=131.04166666666669,printChamber1=131.04166666666669,printChamber2=131.04166666666669,printChamber3=131.04166666666669,printChamber4=131.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:09:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 50.5 [HeaterCheck.cs@67] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.9972381591797, Elapsed=00:00:30.2022234 [ControlledHeating.cs@486] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.9972381591797 after 00:00:30.2022826 [ControlledHeating.cs@493] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2161942. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631090. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2835451. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2999340. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:09:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 230275698600 (230275698600 @ 0) for mcu = 1904.374878 [28/06/2026 12:22:55] (1918.964155 sec) to 232689972579 (from now=232569972579, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 230275698600 (230275698600 @ 0) for mcu = 1904.374878 [28/06/2026 12:22:55] (1918.964155 sec) to 232689972579 (from external timestamp, flags=None, requested=232689972579 (232689972579 @ 0) for mcu = 1924.494218 [28/06/2026 12:23:15] (1939.083104825 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:09:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 230275698600 (230275698600 @ 0) for mcu = 1904.374878 [28/06/2026 12:22:55] (1918.964155 sec) to 232689972579 (from external timestamp, flags=None, requested=232689972579 (232689972579 @ 0) for mcu = 1924.494218 [28/06/2026 12:23:15] (1939.083104825 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:09:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:13 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=120.25 that are outside of set tolerance 10 for current step target 131.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:09:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 131.04167 with temperature 126.07142639160156 [HeaterCheck.cs@67] +06/28/2026 14:09:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 51 [HeaterCheck.cs@67] +06/28/2026 14:09:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 131.04167 with temperature 126.07142639160156 [HeaterCheck.cs@67] +06/28/2026 14:09:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 131.04167 with temperature 126.25 [HeaterCheck.cs@67] +06/28/2026 14:09:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1162.7317269, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.8415482474863027, Elapsed = 00:19:22.7447604, TimeTotal = 17:32:19.5219749, Remaining = 17:12:56.7772145, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:39.5990419, WeightTotalEstimate = 08:03:39.5990419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:22.2288455, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:34.7800959, HeatingElapsed = 00:19:22.7447604, HeatingEstimate = 00:50:37.2682731, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:31.6068585, WeightEstimate = 08:03:39.5990419 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:19. coolingEstimate=04:14:34.7800959 [PrintingService.cs@1912] +06/28/2026 14:09:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8415482474863027;StartedAtUtc;00:19:22.7447604;17:32:19.5219749;17:12:56.7772145;False;661;0;0;00:00:00;08:03:39.5990419;08:03:39.5990419;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:22.2288455;00:00:00;04:14:34.7800959;00:19:22.7447604;00:50:37.2682731;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:31.6068585 [PrintingService.cs@1918] +06/28/2026 14:09:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=132.04166666666669,printChamber1=132.04166666666669,printChamber2=132.04166666666669,printChamber3=132.04166666666669,printChamber4=132.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:09:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (336 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:09:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9844308. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:09:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9844308. Loops = 44. GC duration = 00:00:00.4005273. SinceCollect=00:01:00.8133983. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:09:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5447, gen1=1123, gen2=54, LatencyMode=Interactive, FreeMemory=5809209344, Live=488921592, HeapSizeBytes=555076408, FragmentedBytes=66508680, TotalCommittedBytes=565460992, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:09:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:09:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:09:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 132.04167 with temperature 127.5 [HeaterCheck.cs@67] +06/28/2026 14:09:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1425713 ~ 5.99 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:09:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 132.04167 with temperature 127.25 [HeaterCheck.cs@67] +06/28/2026 14:09:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=121.5 that are outside of set tolerance 10 for current step target 132.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:09:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 132.04167 with temperature 127.25 [HeaterCheck.cs@67] +06/28/2026 14:09:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1169.7329232, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.8526367094755827, Elapsed = 00:19:29.7459624, TimeTotal = 17:32:19.5219806, Remaining = 17:12:49.7760182, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:39.5990419, WeightTotalEstimate = 08:03:39.5990419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:22.2288455, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:34.7800959, HeatingElapsed = 00:19:29.7459624, HeatingEstimate = 00:50:30.2670768, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:31.6068585, WeightEstimate = 08:03:39.5990419 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:19. coolingEstimate=04:14:34.7800959 [PrintingService.cs@1912] +06/28/2026 14:09:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8526367094755827;StartedAtUtc;00:19:29.7459624;17:32:19.5219806;17:12:49.7760182;False;661;0;0;00:00:00;08:03:39.5990419;08:03:39.5990419;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:22.2288455;00:00:00;04:14:34.7800959;00:19:29.7459624;00:50:30.2670768;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:31.6068585 [PrintingService.cs@1918] +06/28/2026 14:09:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=133.04166666666669,printChamber1=133.04166666666669,printChamber2=133.04166666666669,printChamber3=133.04166666666669,printChamber4=133.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:09:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 133.04167 with temperature 127 [HeaterCheck.cs@88] +06/28/2026 14:09:35 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=122.75 that are outside of set tolerance 10 for current step target 133.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:09:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1176.7371857, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.863733055111724, Elapsed = 00:19:36.7521784, TimeTotal = 17:32:19.5239341, Remaining = 17:12:42.7717557, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:39.5990419, WeightTotalEstimate = 08:03:39.5990419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:22.2288455, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:34.7800959, HeatingElapsed = 00:19:36.7521784, HeatingEstimate = 00:50:23.2628143, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:31.6068585, WeightEstimate = 08:03:39.5990419 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:19. coolingEstimate=04:14:34.7800959 [PrintingService.cs@1912] +06/28/2026 14:09:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.863733055111724;StartedAtUtc;00:19:36.7521784;17:32:19.5239341;17:12:42.7717557;False;661;0;0;00:00:00;08:03:39.5990419;08:03:39.5990419;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:22.2288455;00:00:00;04:14:34.7800959;00:19:36.7521784;00:50:23.2628143;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:31.6068585 [PrintingService.cs@1918] +06/28/2026 14:09:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=134.04166666666669,printChamber1=134.04166666666669,printChamber2=134.04166666666669,printChamber3=134.04166666666669,printChamber4=134.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:09:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 50.25 [HeaterCheck.cs@67] +06/28/2026 14:09:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.041668 with temperature 50.25 [HeaterCheck.cs@67] +06/28/2026 14:09:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=124 that are outside of set tolerance 10 for current step target 134.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1183.7418674, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.8748239944477145, Elapsed = 00:19:43.7549081, TimeTotal = 17:32:19.5219821, Remaining = 17:12:35.7670740, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:39.5990419, WeightTotalEstimate = 08:03:39.5990419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:22.2288455, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:34.7800959, HeatingElapsed = 00:19:43.7549081, HeatingEstimate = 00:50:16.2581326, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:31.6068585, WeightEstimate = 08:03:39.5990419 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:19. coolingEstimate=04:14:34.7800959 [PrintingService.cs@1912] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8748239944477145;StartedAtUtc;00:19:43.7549081;17:32:19.5219821;17:12:35.7670740;False;661;0;0;00:00:00;08:03:39.5990419;08:03:39.5990419;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:22.2288455;00:00:00;04:14:34.7800959;00:19:43.7549081;00:50:16.2581326;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:31.6068585 [PrintingService.cs@1918] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=135.04166666666669,printChamber1=135.04166666666669,printChamber2=135.04166666666669,printChamber3=135.04166666666669,printChamber4=135.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.46705627441406, Elapsed=00:00:30.6279747 [ControlledHeating.cs@486] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.46705627441406 after 00:00:30.6280286 [ControlledHeating.cs@493] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0305777. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633115. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0957258. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1098933. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:09:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 233901493807 (233901493807 @ 0) for mcu = 1934.590375 [28/06/2026 12:23:25] (1949.1791150583333 sec) to 236364108663 (from now=236244108663, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 233901493807 (233901493807 @ 0) for mcu = 1934.590375 [28/06/2026 12:23:25] (1949.1791150583333 sec) to 236364108663 (from external timestamp, flags=None, requested=236364108663 (236364108663 @ 0) for mcu = 1955.112547 [28/06/2026 12:23:46] (1969.700905525 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 233901493807 (233901493807 @ 0) for mcu = 1934.590375 [28/06/2026 12:23:25] (1949.1791150583333 sec) to 236364108663 (from external timestamp, flags=None, requested=236364108663 (236364108663 @ 0) for mcu = 1955.112547 [28/06/2026 12:23:46] (1969.700905525 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:09:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:09:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:09:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1189.7398353, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.8843235452097338, Elapsed = 00:19:49.7528791, TimeTotal = 17:32:19.5219852, Remaining = 17:12:29.7691061, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:03:39.5990419, WeightTotalEstimate = 08:03:39.5990419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:22.2288455, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:34.7800959, HeatingElapsed = 00:19:49.7528791, HeatingEstimate = 00:50:10.2601647, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:31.6068585, WeightEstimate = 08:03:39.5990419 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:19. coolingEstimate=04:14:34.7800959 [PrintingService.cs@1912] +06/28/2026 14:09:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8843235452097338;StartedAtUtc;00:19:49.7528791;17:32:19.5219852;17:12:29.7691061;False;661;0;0;00:00:00;08:03:39.5990419;08:03:39.5990419;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:22.2288455;00:00:00;04:14:34.7800959;00:19:49.7528791;00:50:10.2601647;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:31.6068585 [PrintingService.cs@1918] +06/28/2026 14:09:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=136.04166666666669,printChamber1=136.04166666666669,printChamber2=136.04166666666669,printChamber3=136.04166666666669,printChamber4=136.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:09:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:09:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 136.04167 with temperature 131.75 [HeaterCheck.cs@67] +06/28/2026 14:09:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 136.04167 with temperature 131.35714721679688 [HeaterCheck.cs@67] +06/28/2026 14:09:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9991760. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2213472. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:09:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:09:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:09:55 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=125.25,printChamber4=125.75 that are outside of set tolerance 10 for current step target 136.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:09:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 136.04167 with temperature 131.75 [HeaterCheck.cs@67] +06/28/2026 14:09:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 136.04167 with temperature 131.25 [HeaterCheck.cs@67] +06/28/2026 14:09:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 136.04167 with temperature 131.25 [HeaterCheck.cs@67] +06/28/2026 14:09:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 136.04167 with temperature 131.25 [HeaterCheck.cs@67] +06/28/2026 14:10:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=439707, estimate=83.58077918398367 for layer 33, Z=3.3010027 [PrintingService.cs@1524] +06/28/2026 14:10:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 51 [HeaterCheck.cs@67] +06/28/2026 14:10:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 25, island count 3 [PrintingService.cs@1569] +06/28/2026 14:10:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 34, start=0, count=661, Z=3.401003 [PrintingService.cs@1518] +06/28/2026 14:10:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1036, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:10:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 51 [HeaterCheck.cs@67] +06/28/2026 14:10:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 54.041668 with temperature 42.5 [HeaterCheck.cs@111] +06/28/2026 14:10:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 52.75 [HeaterCheck.cs@67] +06/28/2026 14:10:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 50 [HeaterCheck.cs@67] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.40321350097656, Elapsed=00:00:30.2139375 [ControlledHeating.cs@486] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.40321350097656 after 00:00:30.2140021 [ControlledHeating.cs@493] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2465442. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631482. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3141351. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3276924. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:10:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 237575629891 (237575629891 @ 0) for mcu = 1965.208686 [28/06/2026 12:23:56] (1979.7969157583334 sec) to 239990187380 (from now=239870187380, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 237575629891 (237575629891 @ 0) for mcu = 1965.208686 [28/06/2026 12:23:56] (1979.7969157583334 sec) to 239990187380 (from external timestamp, flags=None, requested=239990187380 (239990187380 @ 0) for mcu = 1985.330352 [28/06/2026 12:24:16] (1999.9182281666667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 237575629891 (237575629891 @ 0) for mcu = 1965.208686 [28/06/2026 12:23:56] (1979.7969157583334 sec) to 239990187380 (from external timestamp, flags=None, requested=239990187380 (239990187380 @ 0) for mcu = 1985.330352 [28/06/2026 12:24:16] (1999.9182281666667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:10:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 49.25 [HeaterCheck.cs@67] +06/28/2026 14:10:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.041668 with temperature 49.75 [HeaterCheck.cs@67] +06/28/2026 14:10:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9808944. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:10:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9808944. Loops = 44. GC duration = 00:00:00.2897121. SinceCollect=00:01:00.7274597. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:10:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5640, gen1=1143, gen2=55, LatencyMode=Interactive, FreeMemory=5802229760, Live=488173848, HeapSizeBytes=555104328, FragmentedBytes=67069320, TotalCommittedBytes=565460992, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:10:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:10:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:10:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (20 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:10:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0650335 ~ 5.98 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:10:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=55.04166666666667,powderChamber1=55.04166666666667,powderChamber2=55.04166666666667,powderChamber3=55.04166666666667,powderChamber4=55.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:10:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 136.04167 with temperature 131.25 [HeaterCheck.cs@67] +06/28/2026 14:10:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.041668 with temperature 50.25 [HeaterCheck.cs@67] +06/28/2026 14:10:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=44.25 that are outside of set tolerance 10 for current step target 55.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:10:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1233.7920975, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 1.9529513850307478, Elapsed = 00:20:33.8051529, TimeTotal = 17:32:56.4396368, Remaining = 17:12:22.6344839, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:06.9454419, WeightTotalEstimate = 08:04:06.9454419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:07:49.5752455, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:44.3513359, HeatingElapsed = 00:20:33.8051529, HeatingEstimate = 00:49:26.2079025, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:23:58.9532585, WeightEstimate = 08:04:06.9454419 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:22:56. coolingEstimate=04:14:44.3513359 [PrintingService.cs@1912] +06/28/2026 14:10:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9529513850307478;StartedAtUtc;00:20:33.8051529;17:32:56.4396368;17:12:22.6344839;False;661;0;0;00:00:00;08:04:06.9454419;08:04:06.9454419;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:07:49.5752455;00:00:00;04:14:44.3513359;00:20:33.8051529;00:49:26.2079025;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:23:58.9532585 [PrintingService.cs@1918] +06/28/2026 14:10:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=137.04166666666669,printChamber1=137.04166666666669,printChamber2=137.04166666666669,printChamber3=137.04166666666669,printChamber4=137.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:10:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 55.041668 with temperature 51 [HeaterCheck.cs@67] +06/28/2026 14:10:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.041668 with temperature 51 [HeaterCheck.cs@67] +06/28/2026 14:10:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=126.5 that are outside of set tolerance 10 for current step target 137.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:10:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 137.04167 with temperature 133.25 [HeaterCheck.cs@67] +06/28/2026 14:10:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 137.04167 with temperature 132.5 [HeaterCheck.cs@67] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.24356079101562, Elapsed=00:00:30.5024771 [ControlledHeating.cs@486] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.24356079101562 after 00:00:30.5025562 [ControlledHeating.cs@493] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0265330. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625264. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0929089. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1123562. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:10:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 241201708608 (241201708608 @ 0) for mcu = 1995.426603 [28/06/2026 12:24:26] (2010.0142384 sec) to 243651587028 (from now=243531587028, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 241201708608 (241201708608 @ 0) for mcu = 1995.426603 [28/06/2026 12:24:26] (2010.0142384 sec) to 243651587028 (from external timestamp, flags=None, requested=243651587028 (243651587028 @ 0) for mcu = 2015.842642 [28/06/2026 12:24:46] (2030.4298919 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 241201708608 (241201708608 @ 0) for mcu = 1995.426603 [28/06/2026 12:24:26] (2010.0142384 sec) to 243651587028 (from external timestamp, flags=None, requested=243651587028 (243651587028 @ 0) for mcu = 2015.842642 [28/06/2026 12:24:46] (2030.4298919 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 55.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:10:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.041668 with temperature 50.75 [HeaterCheck.cs@67] +06/28/2026 14:10:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.041668 with temperature 50.75 [HeaterCheck.cs@67] +06/28/2026 14:10:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=327333, estimate=76.64009009045192 for layer 34, Z=3.401003 [PrintingService.cs@1524] +06/28/2026 14:10:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 26, island count 3 [PrintingService.cs@1569] +06/28/2026 14:10:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 35, start=0, count=661, Z=3.5010028 [PrintingService.cs@1518] +06/28/2026 14:10:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1073, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:10:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9827246. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2210387. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:10:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:10:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:10:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 137.04167 with temperature 124.25 [HeaterCheck.cs@111] +06/28/2026 14:10:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 137.04167 with temperature 132.2142791748047 [HeaterCheck.cs@67] +06/28/2026 14:11:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=56.04166666666667,powderChamber1=56.04166666666667,powderChamber2=56.04166666666667,powderChamber3=56.04166666666667,powderChamber4=56.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:11:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 56.041668 with temperature 50.5 [HeaterCheck.cs@88] +06/28/2026 14:11:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=46 that are outside of set tolerance 10 for current step target 56.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:11:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1267.8125153, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.005069802026386, Elapsed = 00:21:07.8255547, TimeTotal = 17:33:50.9934257, Remaining = 17:12:43.1678710, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:47.3556677, WeightTotalEstimate = 08:04:47.3556677, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:29.9854713, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:58.4949150, HeatingElapsed = 00:21:07.8255547, HeatingEstimate = 00:48:52.1874847, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:24:39.3634843, WeightEstimate = 08:04:47.3556677 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:23:50. coolingEstimate=04:14:58.4949150 [PrintingService.cs@1912] +06/28/2026 14:11:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.005069802026386;StartedAtUtc;00:21:07.8255547;17:33:50.9934257;17:12:43.1678710;False;661;0;0;00:00:00;08:04:47.3556677;08:04:47.3556677;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:29.9854713;00:00:00;04:14:58.4949150;00:21:07.8255547;00:48:52.1874847;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:24:39.3634843 [PrintingService.cs@1918] +06/28/2026 14:11:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=138.04166666666669,printChamber1=138.04166666666669,printChamber2=138.04166666666669,printChamber3=138.04166666666669,printChamber4=138.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.75 [HeaterCheck.cs@67] +06/28/2026 14:11:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.5 [HeaterCheck.cs@67] +06/28/2026 14:11:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 56.041668 with temperature 43.75 [HeaterCheck.cs@111] +06/28/2026 14:11:13 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=127.25 that are outside of set tolerance 10 for current step target 138.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:11:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1274.8191807, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.0161510329524766, Elapsed = 00:21:14.8323293, TimeTotal = 17:33:50.9935349, Remaining = 17:12:36.1612056, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:47.3556677, WeightTotalEstimate = 08:04:47.3556677, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:29.9854713, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:58.4949150, HeatingElapsed = 00:21:14.8323293, HeatingEstimate = 00:48:45.1808193, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:24:39.3634843, WeightEstimate = 08:04:47.3556677 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:23:50. coolingEstimate=04:14:58.4949150 [PrintingService.cs@1912] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0161510329524766;StartedAtUtc;00:21:14.8323293;17:33:50.9935349;17:12:36.1612056;False;661;0;0;00:00:00;08:04:47.3556677;08:04:47.3556677;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:29.9854713;00:00:00;04:14:58.4949150;00:21:14.8323293;00:48:45.1808193;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:24:39.3634843 [PrintingService.cs@1918] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=139.04166666666669,printChamber1=139.04166666666669,printChamber2=139.04166666666669,printChamber3=139.04166666666669,printChamber4=139.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.62059020996094, Elapsed=00:00:30.2192483 [ControlledHeating.cs@486] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.62059020996094 after 00:00:30.2193038 [ControlledHeating.cs@493] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2404018. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 139.04167 with temperature 135.25 [HeaterCheck.cs@67] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634053. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3090235. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3212515. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:11:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 244863108256 (244863108256 @ 0) for mcu = 2025.938918 [28/06/2026 12:24:56] (2040.5259021333334 sec) to 247276572620 (from now=247156572620, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 244863108256 (244863108256 @ 0) for mcu = 2025.938918 [28/06/2026 12:24:56] (2040.5259021333334 sec) to 247276572620 (from external timestamp, flags=None, requested=247276572620 (247276572620 @ 0) for mcu = 2046.051529 [28/06/2026 12:25:16] (2060.6381051666667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 244863108256 (244863108256 @ 0) for mcu = 2025.938918 [28/06/2026 12:24:56] (2040.5259021333334 sec) to 247276572620 (from external timestamp, flags=None, requested=247276572620 (247276572620 @ 0) for mcu = 2046.051529 [28/06/2026 12:25:16] (2060.6381051666667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:11:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 56.041668 with temperature 51.5 [HeaterCheck.cs@67] +06/28/2026 14:11:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 139.04167 with temperature 134.25 [HeaterCheck.cs@67] +06/28/2026 14:11:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.75 [HeaterCheck.cs@67] +06/28/2026 14:11:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.5 [HeaterCheck.cs@67] +06/28/2026 14:11:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1280.8281419, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.0256540426568357, Elapsed = 00:21:20.8411744, TimeTotal = 17:33:50.9934188, Remaining = 17:12:30.1522444, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:47.3556677, WeightTotalEstimate = 08:04:47.3556677, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:29.9854713, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:58.4949150, HeatingElapsed = 00:21:20.8411744, HeatingEstimate = 00:48:39.1718581, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:24:39.3634843, WeightEstimate = 08:04:47.3556677 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:23:50. coolingEstimate=04:14:58.4949150 [PrintingService.cs@1912] +06/28/2026 14:11:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0256540426568357;StartedAtUtc;00:21:20.8411744;17:33:50.9934188;17:12:30.1522444;False;661;0;0;00:00:00;08:04:47.3556677;08:04:47.3556677;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:29.9854713;00:00:00;04:14:58.4949150;00:21:20.8411744;00:48:39.1718581;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:24:39.3634843 [PrintingService.cs@1918] +06/28/2026 14:11:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=140.04166666666669,printChamber1=140.04166666666669,printChamber2=140.04166666666669,printChamber3=140.04166666666669,printChamber4=140.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 140.04167 with temperature 135.25 [HeaterCheck.cs@67] +06/28/2026 14:11:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 140.04167 with temperature 135.25 [HeaterCheck.cs@67] +06/28/2026 14:11:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.5 [HeaterCheck.cs@67] +06/28/2026 14:11:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 140.04167 with temperature 135.25 [HeaterCheck.cs@67] +06/28/2026 14:11:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 140.04167 with temperature 135.5 [HeaterCheck.cs@67] +06/28/2026 14:11:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.25 [HeaterCheck.cs@67] +06/28/2026 14:11:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9947907. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:11:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (213 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:11:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9947907. Loops = 44. GC duration = 00:00:00.2858264. SinceCollect=00:01:00.7164731. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:11:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5829, gen1=1156, gen2=56, LatencyMode=Interactive, FreeMemory=5806178304, Live=489946008, HeapSizeBytes=554420816, FragmentedBytes=65009176, TotalCommittedBytes=565460992, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:11:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:11:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:11:25 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0335051 ~ 5.98 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:11:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1286.8284824, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.0351447787244394, Elapsed = 00:21:26.8422766, TimeTotal = 17:33:50.9941805, Remaining = 17:12:24.1519039, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:47.3556677, WeightTotalEstimate = 08:04:47.3556677, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:29.9854713, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:58.4949150, HeatingElapsed = 00:21:26.8422766, HeatingEstimate = 00:48:33.1715176, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:24:39.3634843, WeightEstimate = 08:04:47.3556677 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:23:50. coolingEstimate=04:14:58.4949150 [PrintingService.cs@1912] +06/28/2026 14:11:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0351447787244394;StartedAtUtc;00:21:26.8422766;17:33:50.9941805;17:12:24.1519039;False;661;0;0;00:00:00;08:04:47.3556677;08:04:47.3556677;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:29.9854713;00:00:00;04:14:58.4949150;00:21:26.8422766;00:48:33.1715176;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:24:39.3634843 [PrintingService.cs@1918] +06/28/2026 14:11:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=141.04166666666669,printChamber1=141.04166666666669,printChamber2=141.04166666666669,printChamber3=141.04166666666669,printChamber4=141.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 56.041668 with temperature 52.5 [HeaterCheck.cs@67] +06/28/2026 14:11:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 141.04167 with temperature 136.5 [HeaterCheck.cs@67] +06/28/2026 14:11:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1292.8358987, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.044644352706587, Elapsed = 00:21:32.8489362, TimeTotal = 17:33:50.9934238, Remaining = 17:12:18.1444876, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:47.3556677, WeightTotalEstimate = 08:04:47.3556677, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:29.9854713, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:58.4949150, HeatingElapsed = 00:21:32.8489362, HeatingEstimate = 00:48:27.1641013, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:24:39.3634843, WeightEstimate = 08:04:47.3556677 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:23:50. coolingEstimate=04:14:58.4949150 [PrintingService.cs@1912] +06/28/2026 14:11:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.044644352706587;StartedAtUtc;00:21:32.8489362;17:33:50.9934238;17:12:18.1444876;False;661;0;0;00:00:00;08:04:47.3556677;08:04:47.3556677;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:29.9854713;00:00:00;04:14:58.4949150;00:21:32.8489362;00:48:27.1641013;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:24:39.3634843 [PrintingService.cs@1918] +06/28/2026 14:11:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=142.04166666666669,printChamber1=142.04166666666669,printChamber2=142.04166666666669,printChamber3=142.04166666666669,printChamber4=142.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 142.04167 with temperature 137.5 [HeaterCheck.cs@67] +06/28/2026 14:11:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1298.8371907, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.054135412219459, Elapsed = 00:21:38.8502274, TimeTotal = 17:33:50.9934230, Remaining = 17:12:12.1431956, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:47.3556677, WeightTotalEstimate = 08:04:47.3556677, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:29.9854713, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:58.4949150, HeatingElapsed = 00:21:38.8502274, HeatingEstimate = 00:48:21.1628093, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:24:39.3634843, WeightEstimate = 08:04:47.3556677 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:23:50. coolingEstimate=04:14:58.4949150 [PrintingService.cs@1912] +06/28/2026 14:11:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.054135412219459;StartedAtUtc;00:21:38.8502274;17:33:50.9934230;17:12:12.1431956;False;661;0;0;00:00:00;08:04:47.3556677;08:04:47.3556677;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:29.9854713;00:00:00;04:14:58.4949150;00:21:38.8502274;00:48:21.1628093;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:24:39.3634843 [PrintingService.cs@1918] +06/28/2026 14:11:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=143.04166666666669,printChamber1=143.04166666666669,printChamber2=143.04166666666669,printChamber3=143.04166666666669,printChamber4=143.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 52 [HeaterCheck.cs@67] +06/28/2026 14:11:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 51.5 [HeaterCheck.cs@67] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1304.8410944, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.063630601833944, Elapsed = 00:21:44.8541301, TimeTotal = 17:33:50.9934220, Remaining = 17:12:06.1392919, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:04:47.3556677, WeightTotalEstimate = 08:04:47.3556677, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:29.9854713, CoolingElapsed = 00:00:00, CoolingEstimate = 04:14:58.4949150, HeatingElapsed = 00:21:44.8541301, HeatingEstimate = 00:48:15.1589056, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:24:39.3634843, WeightEstimate = 08:04:47.3556677 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:23:50. coolingEstimate=04:14:58.4949150 [PrintingService.cs@1912] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.063630601833944;StartedAtUtc;00:21:44.8541301;17:33:50.9934220;17:12:06.1392919;False;661;0;0;00:00:00;08:04:47.3556677;08:04:47.3556677;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:29.9854713;00:00:00;04:14:58.4949150;00:21:44.8541301;00:48:15.1589056;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:24:39.3634843 [PrintingService.cs@1918] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=144.04166666666669,printChamber1=144.04166666666669,printChamber2=144.04166666666669,printChamber3=144.04166666666669,printChamber4=144.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.11358642578125, Elapsed=00:00:30.4927407 [ControlledHeating.cs@486] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.11358642578125 after 00:00:30.4928728 [ControlledHeating.cs@493] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0129578. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:11:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632975. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0791051. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0970686. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:11:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 248488093848 (248488093848 @ 0) for mcu = 2056.147661 [28/06/2026 12:25:27] (2070.7341154 sec) to 250935744757 (from now=250815744757, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 248488093848 (248488093848 @ 0) for mcu = 2056.147661 [28/06/2026 12:25:27] (2070.7341154 sec) to 250935744757 (from external timestamp, flags=None, requested=250935744757 (250935744757 @ 0) for mcu = 2076.545139 [28/06/2026 12:25:47] (2091.1312063083333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 248488093848 (248488093848 @ 0) for mcu = 2056.147661 [28/06/2026 12:25:27] (2070.7341154 sec) to 250935744757 (from external timestamp, flags=None, requested=250935744757 (250935744757 @ 0) for mcu = 2076.545139 [28/06/2026 12:25:47] (2091.1312063083333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:11:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:11:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=442529, estimate=84.08186690818238 for layer 35, Z=3.5010028 [PrintingService.cs@1524] +06/28/2026 14:11:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 27, island count 3 [PrintingService.cs@1569] +06/28/2026 14:11:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 36, start=0, count=661, Z=3.601003 [PrintingService.cs@1518] +06/28/2026 14:11:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1086, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:11:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1310.8394333, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.0719543426270794, Elapsed = 00:21:50.8528984, TimeTotal = 17:34:26.4953774, Remaining = 17:12:35.6424790, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:05:13.6530944, WeightTotalEstimate = 08:05:13.6530944, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:56.2828980, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:07.6990143, HeatingElapsed = 00:21:50.8528984, HeatingEstimate = 00:48:09.1605667, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:25:05.6609110, WeightEstimate = 08:05:13.6530944 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:24:26. coolingEstimate=04:15:07.6990143 [PrintingService.cs@1912] +06/28/2026 14:11:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0719543426270794;StartedAtUtc;00:21:50.8528984;17:34:26.4953774;17:12:35.6424790;False;661;0;0;00:00:00;08:05:13.6530944;08:05:13.6530944;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:56.2828980;00:00:00;04:15:07.6990143;00:21:50.8528984;00:48:09.1605667;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:25:05.6609110 [PrintingService.cs@1918] +06/28/2026 14:11:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=145.04166666666669,printChamber1=145.04166666666669,printChamber2=145.04166666666669,printChamber3=145.04166666666669,printChamber4=145.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 56.041668 with temperature 52 [HeaterCheck.cs@67] +06/28/2026 14:11:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9602169. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2051394. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:11:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:11:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:11:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=134.75 that are outside of set tolerance 10 for current step target 145.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:11:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1317.8420831, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.083022182399922, Elapsed = 00:21:57.8551239, TimeTotal = 17:34:26.4949531, Remaining = 17:12:28.6398292, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:05:13.6530944, WeightTotalEstimate = 08:05:13.6530944, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:56.2828980, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:07.6990143, HeatingElapsed = 00:21:57.8551239, HeatingEstimate = 00:48:02.1579169, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:25:05.6609110, WeightEstimate = 08:05:13.6530944 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:24:26. coolingEstimate=04:15:07.6990143 [PrintingService.cs@1912] +06/28/2026 14:11:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.083022182399922;StartedAtUtc;00:21:57.8551239;17:34:26.4949531;17:12:28.6398292;False;661;0;0;00:00:00;08:05:13.6530944;08:05:13.6530944;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:56.2828980;00:00:00;04:15:07.6990143;00:21:57.8551239;00:48:02.1579169;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:25:05.6609110 [PrintingService.cs@1918] +06/28/2026 14:11:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=146.04166666666669,printChamber1=146.04166666666669,printChamber2=146.04166666666669,printChamber3=146.04166666666669,printChamber4=146.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:11:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 52 [HeaterCheck.cs@67] +06/28/2026 14:12:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=135.5 that are outside of set tolerance 10 for current step target 146.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:12:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 56.041668 with temperature 52.75 [HeaterCheck.cs@67] +06/28/2026 14:12:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 146.04167 with temperature 141.25 [HeaterCheck.cs@67] +06/28/2026 14:12:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 56.041668 with temperature 52.5 [HeaterCheck.cs@67] +06/28/2026 14:12:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1330.8552333, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.103592447137877, Elapsed = 00:22:10.8692295, TimeTotal = 17:34:26.4959085, Remaining = 17:12:15.6266790, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:05:13.6530944, WeightTotalEstimate = 08:05:13.6530944, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:56.2828980, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:07.6990143, HeatingElapsed = 00:22:10.8692295, HeatingEstimate = 00:47:49.1447667, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:25:05.6609110, WeightEstimate = 08:05:13.6530944 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:24:26. coolingEstimate=04:15:07.6990143 [PrintingService.cs@1912] +06/28/2026 14:12:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.103592447137877;StartedAtUtc;00:22:10.8692295;17:34:26.4959085;17:12:15.6266790;False;661;0;0;00:00:00;08:05:13.6530944;08:05:13.6530944;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:56.2828980;00:00:00;04:15:07.6990143;00:22:10.8692295;00:47:49.1447667;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:25:05.6609110 [PrintingService.cs@1918] +06/28/2026 14:12:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=147.04166666666669,printChamber1=147.04166666666669,printChamber2=147.04166666666669,printChamber3=147.04166666666669,printChamber4=147.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:12:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 56.041668 with temperature 52 [HeaterCheck.cs@67] +06/28/2026 14:12:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 56.041668 with temperature 52 [HeaterCheck.cs@67] +06/28/2026 14:12:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 56.041668 with temperature 44.5 [HeaterCheck.cs@111] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.5008087158203, Elapsed=00:00:30.2153523 [ControlledHeating.cs@486] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.5008087158203 after 00:00:30.2156030 [ControlledHeating.cs@493] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2292482. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634217. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2927500. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3087589. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:12:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 252147265985 (252147265985 @ 0) for mcu = 2086.641344 [28/06/2026 12:25:57] (2101.2272165416666 sec) to 254561088087 (from now=254441088087, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 252147265985 (252147265985 @ 0) for mcu = 2086.641344 [28/06/2026 12:25:57] (2101.2272165416666 sec) to 254561088087 (from external timestamp, flags=None, requested=254561088087 (254561088087 @ 0) for mcu = 2106.756913 [28/06/2026 12:26:17] (2121.342400725 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 252147265985 (252147265985 @ 0) for mcu = 2086.641344 [28/06/2026 12:25:57] (2101.2272165416666 sec) to 254561088087 (from external timestamp, flags=None, requested=254561088087 (254561088087 @ 0) for mcu = 2106.756913 [28/06/2026 12:26:17] (2121.342400725 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:12:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=136.25 that are outside of set tolerance 10 for current step target 147.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:12:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 56.041668 with temperature 51.75 [HeaterCheck.cs@67] +06/28/2026 14:12:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1339.8646467, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.1178314204599027, Elapsed = 00:22:19.8777092, TimeTotal = 17:34:26.4949748, Remaining = 17:12:06.6172656, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:05:13.6530944, WeightTotalEstimate = 08:05:13.6530944, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:56.2828980, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:07.6990143, HeatingElapsed = 00:22:19.8777092, HeatingEstimate = 00:47:40.1353533, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:25:05.6609110, WeightEstimate = 08:05:13.6530944 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:24:26. coolingEstimate=04:15:07.6990143 [PrintingService.cs@1912] +06/28/2026 14:12:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1178314204599027;StartedAtUtc;00:22:19.8777092;17:34:26.4949748;17:12:06.6172656;False;661;0;0;00:00:00;08:05:13.6530944;08:05:13.6530944;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:56.2828980;00:00:00;04:15:07.6990143;00:22:19.8777092;00:47:40.1353533;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:25:05.6609110 [PrintingService.cs@1918] +06/28/2026 14:12:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=148.04166666666669,printChamber1=148.04166666666669,printChamber2=148.04166666666669,printChamber3=148.04166666666669,printChamber4=148.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:12:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 148.04167 with temperature 142 [HeaterCheck.cs@88] +06/28/2026 14:12:24 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 14:12:24 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 14:12:24 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 14:12:24 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 14:12:25 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 14:12:25 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 14:12:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=137.25 that are outside of set tolerance 10 for current step target 148.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:12:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (253 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:12:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0715579 ~ 6.01 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:12:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:12:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2929979. SinceCollect=00:01:00.7019606. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:12:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=6017, gen1=1256, gen2=57, LatencyMode=Interactive, FreeMemory=5778456576, Live=490747416, HeapSizeBytes=552838992, FragmentedBytes=63111224, TotalCommittedBytes=567197696, PinnedObjectsCount=25, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:12:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:12:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1348.007618, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.1307039700910715, Elapsed = 00:22:28.0217428, TimeTotal = 17:34:26.4960371, Remaining = 17:11:58.4742943, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:05:13.6530944, WeightTotalEstimate = 08:05:13.6530944, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:08:56.2828980, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:07.6990143, HeatingElapsed = 00:22:28.0217428, HeatingEstimate = 00:47:31.9923820, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:25:05.6609110, WeightEstimate = 08:05:13.6530944 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:24:26. coolingEstimate=04:15:07.6990143 [PrintingService.cs@1912] +06/28/2026 14:12:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.1307039700910715;StartedAtUtc;00:22:28.0217428;17:34:26.4960371;17:11:58.4742943;False;661;0;0;00:00:00;08:05:13.6530944;08:05:13.6530944;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:08:56.2828980;00:00:00;04:15:07.6990143;00:22:28.0217428;00:47:31.9923820;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:25:05.6609110 [PrintingService.cs@1918] +06/28/2026 14:12:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=149.04166666666669,printChamber1=149.04166666666669,printChamber2=149.04166666666669,printChamber3=149.04166666666669,printChamber4=149.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:12:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=57.04166666666667,powderChamber1=57.04166666666667,powderChamber2=57.04166666666667,powderChamber3=57.04166666666667,powderChamber4=57.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:12:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 57.041668 with temperature 52.25 [HeaterCheck.cs@67] +06/28/2026 14:12:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.041668 with temperature 52.5 [HeaterCheck.cs@67] +06/28/2026 14:12:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.041668 with temperature 52.25 [HeaterCheck.cs@67] +06/28/2026 14:12:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 57.041668 with temperature 52.25 [HeaterCheck.cs@67] +06/28/2026 14:12:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=139 that are outside of set tolerance 10 for current step target 149.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:12:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=46.25 that are outside of set tolerance 10 for current step target 57.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:12:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 57.041668 with temperature 52.5 [HeaterCheck.cs@67] +06/28/2026 14:12:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=331253, estimate=78.96380539892989 for layer 36, Z=3.601003 [PrintingService.cs@1524] +06/28/2026 14:12:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 28, island count 3 [PrintingService.cs@1569] +06/28/2026 14:12:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 37, start=0, count=661, Z=3.7010028 [PrintingService.cs@1518] +06/28/2026 14:12:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1099, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:12:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=58.04166666666667,powderChamber1=58.04166666666667,powderChamber2=58.04166666666667,powderChamber3=58.04166666666667,powderChamber4=58.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:12:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 58.041668 with temperature 52.75 [HeaterCheck.cs@88] +06/28/2026 14:12:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.6268768310547, Elapsed=00:00:30.4875704 [ControlledHeating.cs@486] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.6268768310547 after 00:00:30.4878914 [ControlledHeating.cs@493] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0191210. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630359. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0832837. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0954704. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:12:45 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 255772609315 (255772609315 @ 0) for mcu = 2116.853102 [28/06/2026 12:26:27] (2131.4384109583334 sec) to 258219705434 (from now=258099705434, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 255772609315 (255772609315 @ 0) for mcu = 2116.853102 [28/06/2026 12:26:27] (2131.4384109583334 sec) to 258219705434 (from external timestamp, flags=None, requested=258219705434 (258219705434 @ 0) for mcu = 2137.245950 [28/06/2026 12:26:48] (2151.8308786166667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 255772609315 (255772609315 @ 0) for mcu = 2116.853102 [28/06/2026 12:26:27] (2131.4384109583334 sec) to 258219705434 (from external timestamp, flags=None, requested=258219705434 (258219705434 @ 0) for mcu = 2137.245950 [28/06/2026 12:26:48] (2151.8308786166667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:12:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:12:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=47.75 that are outside of set tolerance 10 for current step target 58.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:12:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:12:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 149.04167 with temperature 144.5 [HeaterCheck.cs@67] +06/28/2026 14:12:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:12:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 149.04167 with temperature 144.5 [HeaterCheck.cs@67] +06/28/2026 14:12:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 149.04167 with temperature 144.25 [HeaterCheck.cs@67] +06/28/2026 14:12:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:12:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 149.04167 with temperature 144.25 [HeaterCheck.cs@67] +06/28/2026 14:12:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 149.04167 with temperature 145.25 [HeaterCheck.cs@67] +06/28/2026 14:12:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 149.04167 with temperature 144.25 [HeaterCheck.cs@67] +06/28/2026 14:12:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2073487. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:12:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:12:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:12:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 149.04167 with temperature 144.25 [HeaterCheck.cs@67] +06/28/2026 14:12:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.75 [HeaterCheck.cs@67] +06/28/2026 14:13:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 149.04167 with temperature 145.5 [HeaterCheck.cs@67] +06/28/2026 14:13:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 149.04167 with temperature 144.10714721679688 [HeaterCheck.cs@67] +06/28/2026 14:13:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 149.04167 with temperature 144.07142639160156 [HeaterCheck.cs@67] +06/28/2026 14:13:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.6773681640625, Elapsed=00:00:30.2218817 [ControlledHeating.cs@486] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.6773681640625 after 00:00:30.2219592 [ControlledHeating.cs@493] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2399843. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629853. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3040668. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3157857. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:13:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 259431226662 (259431226662 @ 0) for mcu = 2147.342125 [28/06/2026 12:26:58] (2161.92688885 sec) to 261846031187 (from now=261726031187, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 259431226662 (259431226662 @ 0) for mcu = 2147.342125 [28/06/2026 12:26:58] (2161.92688885 sec) to 261846031187 (from external timestamp, flags=None, requested=261846031187 (261846031187 @ 0) for mcu = 2167.465863 [28/06/2026 12:27:18] (2182.050259891667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 259431226662 (259431226662 @ 0) for mcu = 2147.342125 [28/06/2026 12:26:58] (2161.92688885 sec) to 261846031187 (from external timestamp, flags=None, requested=261846031187 (261846031187 @ 0) for mcu = 2167.465863 [28/06/2026 12:27:18] (2182.050259891667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:13:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.75 [HeaterCheck.cs@67] +06/28/2026 14:13:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0826738 ~ 6.01 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:13:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=443226, estimate=84.91723392802182 for layer 37, Z=3.7010028 [PrintingService.cs@1524] +06/28/2026 14:13:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 29, island count 3 [PrintingService.cs@1569] +06/28/2026 14:13:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 38, start=0, count=661, Z=3.8010027 [PrintingService.cs@1518] +06/28/2026 14:13:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1114, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:13:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:13:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.3086930. SinceCollect=00:01:00.7325617. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:13:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (903 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:13:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=6199, gen1=1271, gen2=58, LatencyMode=Interactive, FreeMemory=5788188672, Live=491732064, HeapSizeBytes=553087072, FragmentedBytes=61855576, TotalCommittedBytes=563265536, PinnedObjectsCount=25, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:13:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:13:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:13:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.60714340209961 [HeaterCheck.cs@67] +06/28/2026 14:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.64285659790039 [HeaterCheck.cs@67] +06/28/2026 14:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1416.0432633, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.2342157690625806, Elapsed = 00:23:36.0563109, TimeTotal = 17:36:20.4635393, Remaining = 17:12:44.4072284, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:06:38.0742643, WeightTotalEstimate = 08:06:38.0742643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:10:20.7040679, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:37.2464238, HeatingElapsed = 00:23:36.0563109, HeatingEstimate = 00:46:23.9567367, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:26:30.0820809, WeightEstimate = 08:06:38.0742643 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:26:20. coolingEstimate=04:15:37.2464238 [PrintingService.cs@1912] +06/28/2026 14:13:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2342157690625806;StartedAtUtc;00:23:36.0563109;17:36:20.4635393;17:12:44.4072284;False;661;0;0;00:00:00;08:06:38.0742643;08:06:38.0742643;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:10:20.7040679;00:00:00;04:15:37.2464238;00:23:36.0563109;00:46:23.9567367;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:26:30.0820809 [PrintingService.cs@1918] +06/28/2026 14:13:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=150.04166666666669,printChamber1=150.04166666666669,printChamber2=150.04166666666669,printChamber3=150.04166666666669,printChamber4=150.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:13:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.46428680419922 [HeaterCheck.cs@67] +06/28/2026 14:13:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.67856979370117 [HeaterCheck.cs@67] +06/28/2026 14:13:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.17856979370117 [HeaterCheck.cs@67] +06/28/2026 14:13:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.42856979370117 [HeaterCheck.cs@67] +06/28/2026 14:13:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 58.041668 with temperature 45 [HeaterCheck.cs@111] +06/28/2026 14:13:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.60714340209961 [HeaterCheck.cs@67] +06/28/2026 14:13:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.75 [HeaterCheck.cs@67] +06/28/2026 14:13:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=139.75,printChamber3=139.25 that are outside of set tolerance 10 for current step target 150.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:13:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.92856979370117 [HeaterCheck.cs@67] +06/28/2026 14:13:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.85714340209961 [HeaterCheck.cs@67] +06/28/2026 14:13:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.71428680419922 [HeaterCheck.cs@67] +06/28/2026 14:13:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.5 [HeaterCheck.cs@67] +06/28/2026 14:13:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.67856979370117 [HeaterCheck.cs@67] +06/28/2026 14:13:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.42856979370117 [HeaterCheck.cs@67] +06/28/2026 14:13:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 58.041668 with temperature 53.96428680419922 [HeaterCheck.cs@67] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.31002807617188, Elapsed=00:00:30.5169720 [ControlledHeating.cs@486] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.31002807617188 after 00:00:30.5170369 [ControlledHeating.cs@493] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0225407. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627191. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0903934. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.25 [HeaterCheck.cs@67] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1062154. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:13:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 263057552415 (263057552415 @ 0) for mcu = 2177.562073 [28/06/2026 12:27:28] (2192.146270125 sec) to 265508826892 (from now=265388826892, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 263057552415 (263057552415 @ 0) for mcu = 2177.562073 [28/06/2026 12:27:28] (2192.146270125 sec) to 265508826892 (from external timestamp, flags=None, requested=265508826892 (265508826892 @ 0) for mcu = 2197.989733 [28/06/2026 12:27:48] (2212.5735574333335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 263057552415 (263057552415 @ 0) for mcu = 2177.562073 [28/06/2026 12:27:28] (2192.146270125 sec) to 265508826892 (from external timestamp, flags=None, requested=265508826892 (265508826892 @ 0) for mcu = 2197.989733 [28/06/2026 12:27:48] (2212.5735574333335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:13:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:13:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:13:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1428.0484695, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.253157311164596, Elapsed = 00:23:48.0615488, TimeTotal = 17:36:20.4635710, Remaining = 17:12:32.4020222, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:06:38.0742643, WeightTotalEstimate = 08:06:38.0742643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:10:20.7040679, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:37.2464238, HeatingElapsed = 00:23:48.0615488, HeatingEstimate = 00:46:11.9515305, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:26:30.0820809, WeightEstimate = 08:06:38.0742643 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:26:20. coolingEstimate=04:15:37.2464238 [PrintingService.cs@1912] +06/28/2026 14:13:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.253157311164596;StartedAtUtc;00:23:48.0615488;17:36:20.4635710;17:12:32.4020222;False;661;0;0;00:00:00;08:06:38.0742643;08:06:38.0742643;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:10:20.7040679;00:00:00;04:15:37.2464238;00:23:48.0615488;00:46:11.9515305;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:26:30.0820809 [PrintingService.cs@1918] +06/28/2026 14:13:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=151.04166666666669,printChamber1=151.04166666666669,printChamber2=151.04166666666669,printChamber3=151.04166666666669,printChamber4=151.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:13:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 151.04167 with temperature 146.10714721679688 [HeaterCheck.cs@67] +06/28/2026 14:13:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=140.75 that are outside of set tolerance 10 for current step target 151.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:13:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1435.0476106, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.264200334223808, Elapsed = 00:23:55.0606675, TimeTotal = 17:36:20.4635486, Remaining = 17:12:25.4028811, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:06:38.0742643, WeightTotalEstimate = 08:06:38.0742643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:10:20.7040679, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:37.2464238, HeatingElapsed = 00:23:55.0606675, HeatingEstimate = 00:46:04.9523894, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:26:30.0820809, WeightEstimate = 08:06:38.0742643 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:26:20. coolingEstimate=04:15:37.2464238 [PrintingService.cs@1912] +06/28/2026 14:13:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.264200334223808;StartedAtUtc;00:23:55.0606675;17:36:20.4635486;17:12:25.4028811;False;661;0;0;00:00:00;08:06:38.0742643;08:06:38.0742643;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:10:20.7040679;00:00:00;04:15:37.2464238;00:23:55.0606675;00:46:04.9523894;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:26:30.0820809 [PrintingService.cs@1918] +06/28/2026 14:13:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=152.04166666666669,printChamber1=152.04166666666669,printChamber2=152.04166666666669,printChamber3=152.04166666666669,printChamber4=152.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:13:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9920234. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2158099. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:13:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:13:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:13:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 152.04167 with temperature 148.25 [HeaterCheck.cs@67] +06/28/2026 14:13:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 58.041668 with temperature 53.75 [HeaterCheck.cs@67] +06/28/2026 14:13:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 152.04167 with temperature 147.25 [HeaterCheck.cs@67] +06/28/2026 14:14:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1441.0479751, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.273667509970106, Elapsed = 00:24:01.0610068, TimeTotal = 17:36:20.4635234, Remaining = 17:12:19.4025166, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:06:38.0742643, WeightTotalEstimate = 08:06:38.0742643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:10:20.7040679, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:37.2464238, HeatingElapsed = 00:24:01.0610068, HeatingEstimate = 00:45:58.9520249, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:26:30.0820809, WeightEstimate = 08:06:38.0742643 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:26:20. coolingEstimate=04:15:37.2464238 [PrintingService.cs@1912] +06/28/2026 14:14:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.273667509970106;StartedAtUtc;00:24:01.0610068;17:36:20.4635234;17:12:19.4025166;False;661;0;0;00:00:00;08:06:38.0742643;08:06:38.0742643;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:10:20.7040679;00:00:00;04:15:37.2464238;00:24:01.0610068;00:45:58.9520249;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:26:30.0820809 [PrintingService.cs@1918] +06/28/2026 14:14:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=153.04166666666669,printChamber1=153.04166666666669,printChamber2=153.04166666666669,printChamber3=153.04166666666669,printChamber4=153.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 153.04167 with temperature 148 [HeaterCheck.cs@88] +06/28/2026 14:14:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 153.04167 with temperature 147.5 [HeaterCheck.cs@88] +06/28/2026 14:14:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 153.04167 with temperature 147.5 [HeaterCheck.cs@88] +06/28/2026 14:14:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 153.04167 with temperature 149.25 [HeaterCheck.cs@67] +06/28/2026 14:14:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=59.04166666666667,powderChamber1=59.04166666666667,powderChamber2=59.04166666666667,powderChamber3=59.04166666666667,powderChamber4=59.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:14:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 59.041668 with temperature 54 [HeaterCheck.cs@88] +06/28/2026 14:14:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:14:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 153.04167 with temperature 148.25 [HeaterCheck.cs@67] +06/28/2026 14:14:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1447.0490141, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.2831378935819036, Elapsed = 00:24:07.0634110, TimeTotal = 17:36:20.4648886, Remaining = 17:12:13.4014776, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:06:38.0742643, WeightTotalEstimate = 08:06:38.0742643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:10:20.7040679, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:37.2464238, HeatingElapsed = 00:24:07.0634110, HeatingEstimate = 00:45:52.9509859, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:26:30.0820809, WeightEstimate = 08:06:38.0742643 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:26:20. coolingEstimate=04:15:37.2464238 [PrintingService.cs@1912] +06/28/2026 14:14:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2831378935819036;StartedAtUtc;00:24:07.0634110;17:36:20.4648886;17:12:13.4014776;False;661;0;0;00:00:00;08:06:38.0742643;08:06:38.0742643;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:10:20.7040679;00:00:00;04:15:37.2464238;00:24:07.0634110;00:45:52.9509859;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:26:30.0820809 [PrintingService.cs@1918] +06/28/2026 14:14:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=154.04166666666669,printChamber1=154.04166666666669,printChamber2=154.04166666666669,printChamber3=154.04166666666669,printChamber4=154.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 154.04167 with temperature 147.25 [HeaterCheck.cs@88] +06/28/2026 14:14:08 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=48.75 that are outside of set tolerance 10 for current step target 59.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:14:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 56 [HeaterCheck.cs@67] +06/28/2026 14:14:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1453.0527612, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.2926083525444927, Elapsed = 00:24:13.0658008, TimeTotal = 17:36:20.4635313, Remaining = 17:12:07.3977305, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:06:38.0742643, WeightTotalEstimate = 08:06:38.0742643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:10:20.7040679, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:37.2464238, HeatingElapsed = 00:24:13.0658008, HeatingEstimate = 00:45:46.9472388, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:26:30.0820809, WeightEstimate = 08:06:38.0742643 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:26:20. coolingEstimate=04:15:37.2464238 [PrintingService.cs@1912] +06/28/2026 14:14:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2926083525444927;StartedAtUtc;00:24:13.0658008;17:36:20.4635313;17:12:07.3977305;False;661;0;0;00:00:00;08:06:38.0742643;08:06:38.0742643;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:10:20.7040679;00:00:00;04:15:37.2464238;00:24:13.0658008;00:45:46.9472388;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:26:30.0820809 [PrintingService.cs@1918] +06/28/2026 14:14:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=155.04166666666669,printChamber1=155.04166666666669,printChamber2=155.04166666666669,printChamber3=155.04166666666669,printChamber4=155.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=331480, estimate=79.31657972059753 for layer 38, Z=3.8010027 [PrintingService.cs@1524] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 30, island count 3 [PrintingService.cs@1569] +06/28/2026 14:14:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 39, start=0, count=661, Z=3.901003 [PrintingService.cs@1518] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1119, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.2719268798828, Elapsed=00:00:30.2078544 [ControlledHeating.cs@486] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.2719268798828 after 00:00:30.2079623 [ControlledHeating.cs@493] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2310176. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631270. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2999630. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3145273. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:14:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 266720348120 (266720348120 @ 0) for mcu = 2208.085981 [28/06/2026 12:27:59] (2222.669567666667 sec) to 269133717286 (from now=269013717286, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 266720348120 (266720348120 @ 0) for mcu = 2208.085981 [28/06/2026 12:27:59] (2222.669567666667 sec) to 269133717286 (from external timestamp, flags=None, requested=269133717286 (269133717286 @ 0) for mcu = 2228.197777 [28/06/2026 12:28:19] (2242.7809773833333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 266720348120 (266720348120 @ 0) for mcu = 2208.085981 [28/06/2026 12:27:59] (2222.669567666667 sec) to 269133717286 (from external timestamp, flags=None, requested=269133717286 (269133717286 @ 0) for mcu = 2228.197777 [28/06/2026 12:28:19] (2242.7809773833333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.5 [HeaterCheck.cs@67] +06/28/2026 14:14:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.5 [HeaterCheck.cs@67] +06/28/2026 14:14:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1459.0558516, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.2991245943206016, Elapsed = 00:24:19.0688922, TimeTotal = 17:37:41.9322417, Remaining = 17:13:22.8633495, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:07:38.4214565, WeightTotalEstimate = 08:07:38.4214565, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:11:21.0512601, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:58.3679410, HeatingElapsed = 00:24:19.0688922, HeatingEstimate = 00:45:40.9441484, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:27:30.4292731, WeightEstimate = 08:07:38.4214565 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:27:41. coolingEstimate=04:15:58.3679410 [PrintingService.cs@1912] +06/28/2026 14:14:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2991245943206016;StartedAtUtc;00:24:19.0688922;17:37:41.9322417;17:13:22.8633495;False;661;0;0;00:00:00;08:07:38.4214565;08:07:38.4214565;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:11:21.0512601;00:00:00;04:15:58.3679410;00:24:19.0688922;00:45:40.9441484;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:27:30.4292731 [PrintingService.cs@1918] +06/28/2026 14:14:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=156.04166666666669,printChamber1=156.04166666666669,printChamber2=156.04166666666669,printChamber3=156.04166666666669,printChamber4=156.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.5 [HeaterCheck.cs@67] +06/28/2026 14:14:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156.04167 with temperature 151.5 [HeaterCheck.cs@67] +06/28/2026 14:14:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1465.0563223, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.308579895934443, Elapsed = 00:24:25.0694104, TimeTotal = 17:37:41.9322892, Remaining = 17:13:16.8628788, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:07:38.4214565, WeightTotalEstimate = 08:07:38.4214565, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:11:21.0512601, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:58.3679410, HeatingElapsed = 00:24:25.0694104, HeatingEstimate = 00:45:34.9436777, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:27:30.4292731, WeightEstimate = 08:07:38.4214565 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:27:41. coolingEstimate=04:15:58.3679410 [PrintingService.cs@1912] +06/28/2026 14:14:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.308579895934443;StartedAtUtc;00:24:25.0694104;17:37:41.9322892;17:13:16.8628788;False;661;0;0;00:00:00;08:07:38.4214565;08:07:38.4214565;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:11:21.0512601;00:00:00;04:15:58.3679410;00:24:25.0694104;00:45:34.9436777;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:27:30.4292731 [PrintingService.cs@1918] +06/28/2026 14:14:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=157.04166666666669,printChamber1=157.04166666666669,printChamber2=157.04166666666669,printChamber3=157.04166666666669,printChamber4=157.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:14:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.75 [HeaterCheck.cs@67] +06/28/2026 14:14:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0732448 ~ 5.98 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:14:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:14:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.4002848. SinceCollect=00:01:00.8200187. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:14:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=6386, gen1=1301, gen2=59, LatencyMode=Interactive, FreeMemory=5778341888, Live=491512864, HeapSizeBytes=553478064, FragmentedBytes=62433160, TotalCommittedBytes=565903360, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:14:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:14:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:14:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (314 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:14:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=146.75,printChamber4=146.75 that are outside of set tolerance 10 for current step target 157.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:14:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1472.0589629, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.3196142278644722, Elapsed = 00:24:32.0720097, TimeTotal = 17:37:41.9322479, Remaining = 17:13:09.8602382, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:07:38.4214565, WeightTotalEstimate = 08:07:38.4214565, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:11:21.0512601, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:58.3679410, HeatingElapsed = 00:24:32.0720097, HeatingEstimate = 00:45:27.9410371, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:27:30.4292731, WeightEstimate = 08:07:38.4214565 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:27:41. coolingEstimate=04:15:58.3679410 [PrintingService.cs@1912] +06/28/2026 14:14:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3196142278644722;StartedAtUtc;00:24:32.0720097;17:37:41.9322479;17:13:09.8602382;False;661;0;0;00:00:00;08:07:38.4214565;08:07:38.4214565;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:11:21.0512601;00:00:00;04:15:58.3679410;00:24:32.0720097;00:45:27.9410371;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:27:30.4292731 [PrintingService.cs@1918] +06/28/2026 14:14:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=158.04166666666669,printChamber1=158.04166666666669,printChamber2=158.04166666666669,printChamber3=158.04166666666669,printChamber4=158.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 158.04167 with temperature 152.92857360839844 [HeaterCheck.cs@88] +06/28/2026 14:14:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 158.04167 with temperature 153.2142791748047 [HeaterCheck.cs@67] +06/28/2026 14:14:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.75 [HeaterCheck.cs@67] +06/28/2026 14:14:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.25 [HeaterCheck.cs@67] +06/28/2026 14:14:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=147.5,printChamber4=148 that are outside of set tolerance 10 for current step target 158.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:14:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.75 [HeaterCheck.cs@67] +06/28/2026 14:14:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 59.041668 with temperature 54.5 [HeaterCheck.cs@67] +06/28/2026 14:14:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1482.0637816, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.3353794209395304, Elapsed = 00:24:42.0769077, TimeTotal = 17:37:41.9323272, Remaining = 17:12:59.8554195, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:07:38.4214565, WeightTotalEstimate = 08:07:38.4214565, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:11:21.0512601, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:58.3679410, HeatingElapsed = 00:24:42.0769077, HeatingEstimate = 00:45:17.9362184, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:27:30.4292731, WeightEstimate = 08:07:38.4214565 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:27:41. coolingEstimate=04:15:58.3679410 [PrintingService.cs@1912] +06/28/2026 14:14:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3353794209395304;StartedAtUtc;00:24:42.0769077;17:37:41.9323272;17:12:59.8554195;False;661;0;0;00:00:00;08:07:38.4214565;08:07:38.4214565;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:11:21.0512601;00:00:00;04:15:58.3679410;00:24:42.0769077;00:45:17.9362184;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:27:30.4292731 [PrintingService.cs@1918] +06/28/2026 14:14:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=159.04166666666669,printChamber1=159.04166666666669,printChamber2=159.04166666666669,printChamber3=159.04166666666669,printChamber4=159.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.02432250976562, Elapsed=00:00:30.6166743 [ControlledHeating.cs@486] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.02432250976562 after 00:00:30.6167352 [ControlledHeating.cs@493] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0280947. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634083. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0922252. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1039218. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:14:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 270345238514 (270345238514 @ 0) for mcu = 2238.293974 [28/06/2026 12:28:29] (2252.8769876166666 sec) to 272806819293 (from now=272686819293, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 270345238514 (270345238514 @ 0) for mcu = 2238.293974 [28/06/2026 12:28:29] (2252.8769876166666 sec) to 272806819293 (from external timestamp, flags=None, requested=272806819293 (272806819293 @ 0) for mcu = 2258.807544 [28/06/2026 12:28:49] (2273.390160775 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 270345238514 (270345238514 @ 0) for mcu = 2238.293974 [28/06/2026 12:28:29] (2252.8769876166666 sec) to 272806819293 (from external timestamp, flags=None, requested=272806819293 (272806819293 @ 0) for mcu = 2258.807544 [28/06/2026 12:28:49] (2273.390160775 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:14:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:14:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=148.25,printChamber2=148.25 that are outside of set tolerance 10 for current step target 159.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:14:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1490.0641343, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.347985828742394, Elapsed = 00:24:50.0771757, TimeTotal = 17:37:41.9322425, Remaining = 17:12:51.8550668, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:07:38.4214565, WeightTotalEstimate = 08:07:38.4214565, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:11:21.0512601, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:58.3679410, HeatingElapsed = 00:24:50.0771757, HeatingEstimate = 00:45:09.9358657, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:27:30.4292731, WeightEstimate = 08:07:38.4214565 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:27:41. coolingEstimate=04:15:58.3679410 [PrintingService.cs@1912] +06/28/2026 14:14:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.347985828742394;StartedAtUtc;00:24:50.0771757;17:37:41.9322425;17:12:51.8550668;False;661;0;0;00:00:00;08:07:38.4214565;08:07:38.4214565;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:11:21.0512601;00:00:00;04:15:58.3679410;00:24:50.0771757;00:45:09.9358657;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:27:30.4292731 [PrintingService.cs@1918] +06/28/2026 14:14:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=160.04166666666669,printChamber1=160.04166666666669,printChamber2=160.04166666666669,printChamber3=160.04166666666669,printChamber4=160.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:14:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=60.04166666666667,powderChamber1=60.04166666666667,powderChamber2=60.04166666666667,powderChamber3=60.04166666666667,powderChamber4=60.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:14:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 60.041668 with temperature 54.5 [HeaterCheck.cs@88] +06/28/2026 14:14:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:14:55 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=149.42857360839844,printChamber1=149.25,printChamber2=149.75 that are outside of set tolerance 10 for current step target 160.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:14:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 160.04167 with temperature 155.75 [HeaterCheck.cs@67] +06/28/2026 14:14:58 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=49.25 that are outside of set tolerance 10 for current step target 60.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:14:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9866214. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2112105. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:14:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:14:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:14:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 60.041668 with temperature 47.5 [HeaterCheck.cs@111] +06/28/2026 14:15:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 160.04167 with temperature 155.25 [HeaterCheck.cs@67] +06/28/2026 14:15:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:15:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1506.0780159, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.3732197818674456, Elapsed = 00:25:06.0911317, TimeTotal = 17:37:41.9323169, Remaining = 17:12:35.8411852, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:07:38.4214565, WeightTotalEstimate = 08:07:38.4214565, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:11:21.0512601, CoolingElapsed = 00:00:00, CoolingEstimate = 04:15:58.3679410, HeatingElapsed = 00:25:06.0911317, HeatingEstimate = 00:44:53.9219841, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:27:30.4292731, WeightEstimate = 08:07:38.4214565 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:27:41. coolingEstimate=04:15:58.3679410 [PrintingService.cs@1912] +06/28/2026 14:15:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.3732197818674456;StartedAtUtc;00:25:06.0911317;17:37:41.9323169;17:12:35.8411852;False;661;0;0;00:00:00;08:07:38.4214565;08:07:38.4214565;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:11:21.0512601;00:00:00;04:15:58.3679410;00:25:06.0911317;00:44:53.9219841;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:27:30.4292731 [PrintingService.cs@1918] +06/28/2026 14:15:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=161.04166666666669,printChamber1=161.04166666666669,printChamber2=161.04166666666669,printChamber3=161.04166666666669,printChamber4=161.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:15:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=443550, estimate=85.188485782164 for layer 39, Z=3.901003 [PrintingService.cs@1524] +06/28/2026 14:15:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 31, island count 3 [PrintingService.cs@1569] +06/28/2026 14:15:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 40, start=0, count=661, Z=4.001003 [PrintingService.cs@1518] +06/28/2026 14:15:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1145, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:15:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.04167 with temperature 156.5 [HeaterCheck.cs@67] +06/28/2026 14:15:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=150.39285278320312 that are outside of set tolerance 10 for current step target 161.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:15:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 56 [HeaterCheck.cs@67] +06/28/2026 14:15:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 161.04167 with temperature 156.10714721679688 [HeaterCheck.cs@67] +06/28/2026 14:15:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.04167 with temperature 156.75 [HeaterCheck.cs@67] +06/28/2026 14:15:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.295166015625, Elapsed=00:00:30.2125831 [ControlledHeating.cs@486] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.295166015625 after 00:00:30.2126369 [ControlledHeating.cs@493] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2378602. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634615. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3032533. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3179762. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:15:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 274018340521 (274018340521 @ 0) for mcu = 2268.903717 [28/06/2026 12:28:59] (2283.4861710083333 sec) to 276432442655 (from now=276312442655, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 274018340521 (274018340521 @ 0) for mcu = 2268.903717 [28/06/2026 12:28:59] (2283.4861710083333 sec) to 276432442655 (from external timestamp, flags=None, requested=276432442655 (276432442655 @ 0) for mcu = 2289.021611 [28/06/2026 12:29:19] (2303.6036887916666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 274018340521 (274018340521 @ 0) for mcu = 2268.903717 [28/06/2026 12:28:59] (2283.4861710083333 sec) to 276432442655 (from external timestamp, flags=None, requested=276432442655 (276432442655 @ 0) for mcu = 2289.021611 [28/06/2026 12:29:19] (2303.6036887916666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:15:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.75 [HeaterCheck.cs@67] +06/28/2026 14:15:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:15:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:15:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:15:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:15:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0297701 ~ 5.96 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:15:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.75 [HeaterCheck.cs@67] +06/28/2026 14:15:28 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (10 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:15:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 157.5 [HeaterCheck.cs@67] +06/28/2026 14:15:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9961019. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:15:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9961019. Loops = 44. GC duration = 00:00:00.2971259. SinceCollect=00:01:00.7228190. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:15:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=6566, gen1=1322, gen2=60, LatencyMode=Interactive, FreeMemory=5784420352, Live=491112856, HeapSizeBytes=553660728, FragmentedBytes=62975584, TotalCommittedBytes=564592640, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:15:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:15:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:15:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.5 [HeaterCheck.cs@67] +06/28/2026 14:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:15:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 161.04167 with temperature 156.25 [HeaterCheck.cs@67] +06/28/2026 14:15:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.5 [HeaterCheck.cs@67] +06/28/2026 14:15:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.5 [HeaterCheck.cs@67] +06/28/2026 14:15:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.5 [HeaterCheck.cs@67] +06/28/2026 14:15:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:15:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.75 [HeaterCheck.cs@67] +06/28/2026 14:15:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 156.75 [HeaterCheck.cs@67] +06/28/2026 14:15:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:15:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:15:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:15:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.21124267578125, Elapsed=00:00:30.5154566 [ControlledHeating.cs@486] +06/28/2026 14:15:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.21124267578125 after 00:00:30.5155227 [ControlledHeating.cs@493] +06/28/2026 14:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0313357. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631780. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0941270. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1067374. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:15:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 277643963883 (277643963883 @ 0) for mcu = 2299.117799 [28/06/2026 12:29:30] (2313.699699025 sec) to 280093775696 (from now=279973775696, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 277643963883 (277643963883 @ 0) for mcu = 2299.117799 [28/06/2026 12:29:30] (2313.699699025 sec) to 280093775696 (from external timestamp, flags=None, requested=280093775696 (280093775696 @ 0) for mcu = 2319.533275 [28/06/2026 12:29:50] (2334.1147974666665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 277643963883 (277643963883 @ 0) for mcu = 2299.117799 [28/06/2026 12:29:30] (2313.699699025 sec) to 280093775696 (from external timestamp, flags=None, requested=280093775696 (280093775696 @ 0) for mcu = 2319.533275 [28/06/2026 12:29:50] (2334.1147974666665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:15:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:15:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:15:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=331503, estimate=79.1217307880635 for layer 40, Z=4.001003 [PrintingService.cs@1524] +06/28/2026 14:15:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 3 [PrintingService.cs@1569] +06/28/2026 14:15:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 41, start=0, count=661, Z=4.1010027 [PrintingService.cs@1518] +06/28/2026 14:15:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1165, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:15:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:15:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2066394. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:15:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:15:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:16:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:16:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 161.04167 with temperature 156.14285278320312 [HeaterCheck.cs@67] +06/28/2026 14:16:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:16:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:16:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 60.041668 with temperature 47 [HeaterCheck.cs@111] +06/28/2026 14:16:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:16:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:16:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 57 [HeaterCheck.cs@67] +06/28/2026 14:16:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 161.04167 with temperature 147.75 [HeaterCheck.cs@111] +06/28/2026 14:16:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:16:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 161.04167 with temperature 156.07142639160156 [HeaterCheck.cs@67] +06/28/2026 14:16:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 161.04167 with temperature 160.75 [HeaterCheck.cs@67] +06/28/2026 14:16:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 56.75 [HeaterCheck.cs@67] +06/28/2026 14:16:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.17648315429688, Elapsed=00:00:30.2035154 [ControlledHeating.cs@486] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.17648315429688 after 00:00:30.2037852 [ControlledHeating.cs@493] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2361029. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628469. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3013038. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3178750. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:16:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 281305296924 (281305296924 @ 0) for mcu = 2329.629443 [28/06/2026 12:30:00] (2344.2108077 sec) to 283719043349 (from now=283599043349, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 281305296924 (281305296924 @ 0) for mcu = 2329.629443 [28/06/2026 12:30:00] (2344.2108077 sec) to 283719043349 (from external timestamp, flags=None, requested=283719043349 (283719043349 @ 0) for mcu = 2349.744364 [28/06/2026 12:30:20] (2364.3253612416665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 281305296924 (281305296924 @ 0) for mcu = 2329.629443 [28/06/2026 12:30:00] (2344.2108077 sec) to 283719043349 (from external timestamp, flags=None, requested=283719043349 (283719043349 @ 0) for mcu = 2349.744364 [28/06/2026 12:30:20] (2364.3253612416665 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:16:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1580.3059441, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.4844828650689887, Elapsed = 00:26:20.3190081, TimeTotal = 17:40:07.5631802, Remaining = 17:13:47.2441721, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:09:26.2962084, WeightTotalEstimate = 08:09:26.2962084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:08.9260120, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:36.1241042, HeatingElapsed = 00:26:20.3190081, HeatingEstimate = 00:43:39.6940559, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:18.3040250, WeightEstimate = 08:09:26.2962084 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:07. coolingEstimate=04:16:36.1241042 [PrintingService.cs@1912] +06/28/2026 14:16:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4844828650689887;StartedAtUtc;00:26:20.3190081;17:40:07.5631802;17:13:47.2441721;False;661;0;0;00:00:00;08:09:26.2962084;08:09:26.2962084;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:08.9260120;00:00:00;04:16:36.1241042;00:26:20.3190081;00:43:39.6940559;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:18.3040250 [PrintingService.cs@1918] +06/28/2026 14:16:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=162.04166666666669,printChamber1=162.04166666666669,printChamber2=162.04166666666669,printChamber3=162.04166666666669,printChamber4=162.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:16:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:16:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 56.5 [HeaterCheck.cs@67] +06/28/2026 14:16:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=151.25 that are outside of set tolerance 10 for current step target 162.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:16:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1173049 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:16:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1587.3084306, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.4954917128123406, Elapsed = 00:26:27.3214672, TimeTotal = 17:40:07.5631528, Remaining = 17:13:40.2416856, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:09:26.2962084, WeightTotalEstimate = 08:09:26.2962084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:08.9260120, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:36.1241042, HeatingElapsed = 00:26:27.3214672, HeatingEstimate = 00:43:32.6915694, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:18.3040250, WeightEstimate = 08:09:26.2962084 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:07. coolingEstimate=04:16:36.1241042 [PrintingService.cs@1912] +06/28/2026 14:16:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4954917128123406;StartedAtUtc;00:26:27.3214672;17:40:07.5631528;17:13:40.2416856;False;661;0;0;00:00:00;08:09:26.2962084;08:09:26.2962084;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:08.9260120;00:00:00;04:16:36.1241042;00:26:27.3214672;00:43:32.6915694;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:18.3040250 [PrintingService.cs@1918] +06/28/2026 14:16:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=163.04166666666669,printChamber1=163.04166666666669,printChamber2=163.04166666666669,printChamber3=163.04166666666669,printChamber4=163.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:16:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:16:29 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (312 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:16:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.3601892. SinceCollect=00:01:00.7869969. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:16:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=6690, gen1=1363, gen2=61, LatencyMode=Interactive, FreeMemory=5771952128, Live=491090928, HeapSizeBytes=553599568, FragmentedBytes=63066904, TotalCommittedBytes=566689792, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:16:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:16:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:16:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1593.3087041, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.50492549480875, Elapsed = 00:26:33.3220744, TimeTotal = 17:40:07.5634865, Remaining = 17:13:34.2414121, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:09:26.2962084, WeightTotalEstimate = 08:09:26.2962084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:08.9260120, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:36.1241042, HeatingElapsed = 00:26:33.3220744, HeatingEstimate = 00:43:26.6912959, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:18.3040250, WeightEstimate = 08:09:26.2962084 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:07. coolingEstimate=04:16:36.1241042 [PrintingService.cs@1912] +06/28/2026 14:16:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.50492549480875;StartedAtUtc;00:26:33.3220744;17:40:07.5634865;17:13:34.2414121;False;661;0;0;00:00:00;08:09:26.2962084;08:09:26.2962084;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:08.9260120;00:00:00;04:16:36.1241042;00:26:33.3220744;00:43:26.6912959;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:18.3040250 [PrintingService.cs@1918] +06/28/2026 14:16:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=164.04166666666669,printChamber1=164.04166666666669,printChamber2=164.04166666666669,printChamber3=164.04166666666669,printChamber4=164.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:16:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 164.04167 with temperature 158.5 [HeaterCheck.cs@88] +06/28/2026 14:16:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 164.04167 with temperature 159.5 [HeaterCheck.cs@67] +06/28/2026 14:16:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 164.04167 with temperature 160 [HeaterCheck.cs@67] +06/28/2026 14:16:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1599.3121005, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.514363157807326, Elapsed = 00:26:39.3251334, TimeTotal = 17:40:07.5631491, Remaining = 17:13:28.2380157, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:09:26.2962084, WeightTotalEstimate = 08:09:26.2962084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:08.9260120, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:36.1241042, HeatingElapsed = 00:26:39.3251334, HeatingEstimate = 00:43:20.6878995, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:18.3040250, WeightEstimate = 08:09:26.2962084 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:07. coolingEstimate=04:16:36.1241042 [PrintingService.cs@1912] +06/28/2026 14:16:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.514363157807326;StartedAtUtc;00:26:39.3251334;17:40:07.5631491;17:13:28.2380157;False;661;0;0;00:00:00;08:09:26.2962084;08:09:26.2962084;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:08.9260120;00:00:00;04:16:36.1241042;00:26:39.3251334;00:43:20.6878995;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:18.3040250 [PrintingService.cs@1918] +06/28/2026 14:16:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=165.04166666666669,printChamber1=165.04166666666669,printChamber2=165.04166666666669,printChamber3=165.04166666666669,printChamber4=165.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:16:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 165.04167 with temperature 159.75 [HeaterCheck.cs@88] +06/28/2026 14:16:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 165.04167 with temperature 160 [HeaterCheck.cs@88] +06/28/2026 14:16:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 165.04167 with temperature 160.25 [HeaterCheck.cs@67] +06/28/2026 14:16:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 165.04167 with temperature 160.25 [HeaterCheck.cs@67] +06/28/2026 14:16:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 56 [HeaterCheck.cs@67] +06/28/2026 14:16:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:16:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 60.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:16:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:16:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1605.3120877, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.5237960815068194, Elapsed = 00:26:45.3251880, TimeTotal = 17:40:07.5632165, Remaining = 17:13:22.2380285, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:09:26.2962084, WeightTotalEstimate = 08:09:26.2962084, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:08.9260120, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:36.1241042, HeatingElapsed = 00:26:45.3251880, HeatingEstimate = 00:43:14.6879123, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:18.3040250, WeightEstimate = 08:09:26.2962084 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:07. coolingEstimate=04:16:36.1241042 [PrintingService.cs@1912] +06/28/2026 14:16:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5237960815068194;StartedAtUtc;00:26:45.3251880;17:40:07.5632165;17:13:22.2380285;False;661;0;0;00:00:00;08:09:26.2962084;08:09:26.2962084;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:08.9260120;00:00:00;04:16:36.1241042;00:26:45.3251880;00:43:14.6879123;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:18.3040250 [PrintingService.cs@1918] +06/28/2026 14:16:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=166.04166666666669,printChamber1=166.04166666666669,printChamber2=166.04166666666669,printChamber3=166.04166666666669,printChamber4=166.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:16:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 166.04167 with temperature 161 [HeaterCheck.cs@88] +06/28/2026 14:16:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 166.04167 with temperature 160.9642791748047 [HeaterCheck.cs@88] +06/28/2026 14:16:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 166.04167 with temperature 161.17857360839844 [HeaterCheck.cs@67] +06/28/2026 14:16:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 166.04167 with temperature 163.25 [HeaterCheck.cs@67] +06/28/2026 14:16:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=443528, estimate=85.35178401147144 for layer 41, Z=4.1010027 [PrintingService.cs@1524] +06/28/2026 14:16:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:16:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 3 [PrintingService.cs@1569] +06/28/2026 14:16:46 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 42, start=0, count=661, Z=4.201003 [PrintingService.cs@1518] +06/28/2026 14:16:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1168, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.118896484375, Elapsed=00:00:30.5857188 [ControlledHeating.cs@486] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.118896484375 after 00:00:30.5857920 [ControlledHeating.cs@493] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0326782. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633259. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0966013. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1093598. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:16:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 284930564577 (284930564577 @ 0) for mcu = 2359.840598 [28/06/2026 12:30:30] (2374.421371475 sec) to 287388419904 (from now=287268419904, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 284930564577 (284930564577 @ 0) for mcu = 2359.840598 [28/06/2026 12:30:30] (2374.421371475 sec) to 287388419904 (from external timestamp, flags=None, requested=287388419904 (287388419904 @ 0) for mcu = 2380.323112 [28/06/2026 12:30:51] (2394.9034992 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 284930564577 (284930564577 @ 0) for mcu = 2359.840598 [28/06/2026 12:30:30] (2374.421371475 sec) to 287388419904 (from external timestamp, flags=None, requested=287388419904 (287388419904 @ 0) for mcu = 2380.323112 [28/06/2026 12:30:51] (2394.9034992 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:16:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:16:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1611.3120605, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.5313950975489075, Elapsed = 00:26:51.3256268, TimeTotal = 17:40:53.6599269, Remaining = 17:14:02.3343001, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:00.4415746, WeightTotalEstimate = 08:10:00.4415746, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:43.0713782, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:48.0749824, HeatingElapsed = 00:26:51.3256268, HeatingEstimate = 00:43:08.6879395, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:52.4493912, WeightEstimate = 08:10:00.4415746 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:53. coolingEstimate=04:16:48.0749824 [PrintingService.cs@1912] +06/28/2026 14:16:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5313950975489075;StartedAtUtc;00:26:51.3256268;17:40:53.6599269;17:14:02.3343001;False;661;0;0;00:00:00;08:10:00.4415746;08:10:00.4415746;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:43.0713782;00:00:00;04:16:48.0749824;00:26:51.3256268;00:43:08.6879395;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:52.4493912 [PrintingService.cs@1918] +06/28/2026 14:16:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=167.04166666666669,printChamber1=167.04166666666669,printChamber2=167.04166666666669,printChamber3=167.04166666666669,printChamber4=167.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:16:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:16:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 167.04167 with temperature 161.75 [HeaterCheck.cs@88] +06/28/2026 14:16:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 167.04167 with temperature 162.5 [HeaterCheck.cs@67] +06/28/2026 14:16:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:16:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 167.04167 with temperature 163 [HeaterCheck.cs@67] +06/28/2026 14:16:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1617.3127471, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.540822931746441, Elapsed = 00:26:57.3268007, TimeTotal = 17:40:53.6604142, Remaining = 17:13:56.3336135, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:00.4415746, WeightTotalEstimate = 08:10:00.4415746, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:43.0713782, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:48.0749824, HeatingElapsed = 00:26:57.3268007, HeatingEstimate = 00:43:02.6872529, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:52.4493912, WeightEstimate = 08:10:00.4415746 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:53. coolingEstimate=04:16:48.0749824 [PrintingService.cs@1912] +06/28/2026 14:16:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.540822931746441;StartedAtUtc;00:26:57.3268007;17:40:53.6604142;17:13:56.3336135;False;661;0;0;00:00:00;08:10:00.4415746;08:10:00.4415746;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:43.0713782;00:00:00;04:16:48.0749824;00:26:57.3268007;00:43:02.6872529;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:52.4493912 [PrintingService.cs@1918] +06/28/2026 14:16:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=168.04166666666669,printChamber1=168.04166666666669,printChamber2=168.04166666666669,printChamber3=168.04166666666669,printChamber4=168.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:16:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:16:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:16:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:16:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9943704. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2170206. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:16:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:16:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:17:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:17:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=155 that are outside of set tolerance 10 for current step target 168.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:17:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:17:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1629.3208775, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.5596883020114625, Elapsed = 00:27:09.3353091, TimeTotal = 17:40:53.6607922, Remaining = 17:13:44.3254831, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:00.4415746, WeightTotalEstimate = 08:10:00.4415746, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:43.0713782, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:48.0749824, HeatingElapsed = 00:27:09.3353091, HeatingEstimate = 00:42:50.6791225, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:52.4493912, WeightEstimate = 08:10:00.4415746 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:53. coolingEstimate=04:16:48.0749824 [PrintingService.cs@1912] +06/28/2026 14:17:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.5596883020114625;StartedAtUtc;00:27:09.3353091;17:40:53.6607922;17:13:44.3254831;False;661;0;0;00:00:00;08:10:00.4415746;08:10:00.4415746;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:43.0713782;00:00:00;04:16:48.0749824;00:27:09.3353091;00:42:50.6791225;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:52.4493912 [PrintingService.cs@1918] +06/28/2026 14:17:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=169.04166666666669,printChamber1=169.04166666666669,printChamber2=169.04166666666669,printChamber3=169.04166666666669,printChamber4=169.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:17:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:17:14 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=158.35714721679688,printChamber4=158.25 that are outside of set tolerance 10 for current step target 169.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:17:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1636.3280347, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.570694570119885, Elapsed = 00:27:16.3411683, TimeTotal = 17:40:53.6594942, Remaining = 17:13:37.3183259, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:00.4415746, WeightTotalEstimate = 08:10:00.4415746, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:13:43.0713782, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:48.0749824, HeatingElapsed = 00:27:16.3411683, HeatingEstimate = 00:42:43.6719653, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:29:52.4493912, WeightEstimate = 08:10:00.4415746 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:30:53. coolingEstimate=04:16:48.0749824 [PrintingService.cs@1912] +06/28/2026 14:17:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.570694570119885;StartedAtUtc;00:27:16.3411683;17:40:53.6594942;17:13:37.3183259;False;661;0;0;00:00:00;08:10:00.4415746;08:10:00.4415746;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:13:43.0713782;00:00:00;04:16:48.0749824;00:27:16.3411683;00:42:43.6719653;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:29:52.4493912 [PrintingService.cs@1918] +06/28/2026 14:17:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=170.04166666666669,printChamber1=170.04166666666669,printChamber2=170.04166666666669,printChamber3=170.04166666666669,printChamber4=170.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:17:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:17:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 56.75 [HeaterCheck.cs@67] +06/28/2026 14:17:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.92929077148438, Elapsed=00:00:30.2020507 [ControlledHeating.cs@486] +06/28/2026 14:17:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.92929077148438 after 00:00:30.2021120 [ControlledHeating.cs@493] +06/28/2026 14:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2384743. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630051. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3058208. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3184809. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:17:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 288599941132 (288599941132 @ 0) for mcu = 2390.419307 [28/06/2026 12:31:01] (2404.9995094333335 sec) to 291013437539 (from now=290893437539, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 288599941132 (288599941132 @ 0) for mcu = 2390.419307 [28/06/2026 12:31:01] (2404.9995094333335 sec) to 291013437539 (from external timestamp, flags=None, requested=291013437539 (291013437539 @ 0) for mcu = 2410.532154 [28/06/2026 12:31:21] (2425.1119794916667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 288599941132 (288599941132 @ 0) for mcu = 2390.419307 [28/06/2026 12:31:01] (2404.9995094333335 sec) to 291013437539 (from external timestamp, flags=None, requested=291013437539 (291013437539 @ 0) for mcu = 2410.532154 [28/06/2026 12:31:21] (2425.1119794916667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:17:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 170.04167 with temperature 165.35714721679688 [HeaterCheck.cs@67] +06/28/2026 14:17:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:17:21 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=159.5 that are outside of set tolerance 10 for current step target 170.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:17:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:24 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 14:17:24 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 14:17:25 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 14:17:25 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 14:17:25 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 14:17:25 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 14:17:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:17:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1497644 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:17:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:17:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 58 [HeaterCheck.cs@67] +06/28/2026 14:17:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9902223. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:17:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:17:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:17:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9902223. Loops = 44. GC duration = 00:00:00.2961199. SinceCollect=00:01:00.7228153. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:17:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=6812, gen1=1395, gen2=62, LatencyMode=Interactive, FreeMemory=5746491392, Live=491429568, HeapSizeBytes=554405472, FragmentedBytes=63516080, TotalCommittedBytes=568524800, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:17:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:17:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:17:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:17:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.25 [HeaterCheck.cs@67] +06/28/2026 14:17:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:17:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.75 [HeaterCheck.cs@67] +06/28/2026 14:17:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 170.04167 with temperature 165.25 [HeaterCheck.cs@67] +06/28/2026 14:17:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 60.041668 with temperature 55.5 [HeaterCheck.cs@67] +06/28/2026 14:17:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 170.04167 with temperature 165.75 [HeaterCheck.cs@67] +06/28/2026 14:17:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=61.04166666666667,powderChamber1=61.04166666666667,powderChamber2=61.04166666666667,powderChamber3=61.04166666666667,powderChamber4=61.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:17:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 61.041668 with temperature 55.25 [HeaterCheck.cs@88] +06/28/2026 14:17:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 170.04167 with temperature 165.25 [HeaterCheck.cs@67] +06/28/2026 14:17:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 170.04167 with temperature 165.25 [HeaterCheck.cs@67] +06/28/2026 14:17:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=331501, estimate=79.37027240328133 for layer 42, Z=4.201003 [PrintingService.cs@1524] +06/28/2026 14:17:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 3 [PrintingService.cs@1569] +06/28/2026 14:17:43 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 43, start=0, count=661, Z=4.301003 [PrintingService.cs@1518] +06/28/2026 14:17:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1187, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:17:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:17:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=50.5 that are outside of set tolerance 10 for current step target 61.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.9432830810547, Elapsed=00:00:30.5052928 [ControlledHeating.cs@486] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.9432830810547 after 00:00:30.5053724 [ControlledHeating.cs@493] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0230667. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633185. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0887062. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1005465. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:17:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 292224958767 (292224958767 @ 0) for mcu = 2420.628356 [28/06/2026 12:31:31] (2435.207989725 sec) to 294673974907 (from now=294553974907, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 292224958767 (292224958767 @ 0) for mcu = 2420.628356 [28/06/2026 12:31:31] (2435.207989725 sec) to 294673974907 (from external timestamp, flags=None, requested=294673974907 (294673974907 @ 0) for mcu = 2441.037206 [28/06/2026 12:31:51] (2455.6164575583334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 292224958767 (292224958767 @ 0) for mcu = 2420.628356 [28/06/2026 12:31:31] (2435.207989725 sec) to 294673974907 (from external timestamp, flags=None, requested=294673974907 (294673974907 @ 0) for mcu = 2441.037206 [28/06/2026 12:31:51] (2455.6164575583334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:17:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:17:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 57 [HeaterCheck.cs@67] +06/28/2026 14:17:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 170.04167 with temperature 165.25 [HeaterCheck.cs@67] +06/28/2026 14:17:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 57 [HeaterCheck.cs@67] +06/28/2026 14:17:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 170.04167 with temperature 165.25 [HeaterCheck.cs@67] +06/28/2026 14:17:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1680.3407637, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.638385711728134, Elapsed = 00:28:00.3540071, TimeTotal = 17:41:28.7169162, Remaining = 17:13:28.3629091, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:26.4099540, WeightTotalEstimate = 08:10:26.4099540, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:14:09.0397576, CoolingElapsed = 00:00:00, CoolingEstimate = 04:16:57.1639152, HeatingElapsed = 00:28:00.3540071, HeatingEstimate = 00:41:59.6592363, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:30:18.4177706, WeightEstimate = 08:10:26.4099540 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:31:28. coolingEstimate=04:16:57.1639152 [PrintingService.cs@1912] +06/28/2026 14:17:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.638385711728134;StartedAtUtc;00:28:00.3540071;17:41:28.7169162;17:13:28.3629091;False;661;0;0;00:00:00;08:10:26.4099540;08:10:26.4099540;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:14:09.0397576;00:00:00;04:16:57.1639152;00:28:00.3540071;00:41:59.6592363;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:30:18.4177706 [PrintingService.cs@1918] +06/28/2026 14:17:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=171.04166666666669,printChamber1=171.04166666666669,printChamber2=171.04166666666669,printChamber3=171.04166666666669,printChamber4=171.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:18:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 171.04167 with temperature 165.92857360839844 [HeaterCheck.cs@88] +06/28/2026 14:18:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 171.04167 with temperature 165.5 [HeaterCheck.cs@88] +06/28/2026 14:18:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.75 [HeaterCheck.cs@67] +06/28/2026 14:18:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9931208. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2141259. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:18:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:18:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:18:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.04167 with temperature 166.5 [HeaterCheck.cs@67] +06/28/2026 14:18:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 61.041668 with temperature 48.75 [HeaterCheck.cs@111] +06/28/2026 14:18:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:05 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=160.5 that are outside of set tolerance 10 for current step target 171.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:18:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.5 [HeaterCheck.cs@67] +06/28/2026 14:18:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.99264526367188, Elapsed=00:00:30.2177674 [ControlledHeating.cs@486] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.99264526367188 after 00:00:30.2178318 [ControlledHeating.cs@493] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2374182. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628852. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3021797. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3158733. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:18:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 295885496135 (295885496135 @ 0) for mcu = 2451.133421 [28/06/2026 12:32:02] (2465.7124677916668 sec) to 298299805800 (from now=298179805800, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 295885496135 (295885496135 @ 0) for mcu = 2451.133421 [28/06/2026 12:32:02] (2465.7124677916668 sec) to 298299805800 (from external timestamp, flags=None, requested=298299805800 (298299805800 @ 0) for mcu = 2471.253053 [28/06/2026 12:32:22] (2485.831715 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 295885496135 (295885496135 @ 0) for mcu = 2451.133421 [28/06/2026 12:32:02] (2465.7124677916668 sec) to 298299805800 (from external timestamp, flags=None, requested=298299805800 (298299805800 @ 0) for mcu = 2471.253053 [28/06/2026 12:32:22] (2485.831715 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.5 [HeaterCheck.cs@67] +06/28/2026 14:18:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0930687 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:18:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 57.5 [HeaterCheck.cs@67] +06/28/2026 14:18:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:18:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (412 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.3021693. SinceCollect=00:01:00.7343041. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:18:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=6942, gen1=1431, gen2=63, LatencyMode=Interactive, FreeMemory=5765120000, Live=490255800, HeapSizeBytes=553846312, FragmentedBytes=64106176, TotalCommittedBytes=566689792, PinnedObjectsCount=30, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:18:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:18:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:18:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=443657, estimate=85.4168745476797 for layer 43, Z=4.301003 [PrintingService.cs@1524] +06/28/2026 14:18:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 3 [PrintingService.cs@1569] +06/28/2026 14:18:31 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 44, start=0, count=661, Z=4.401003 [PrintingService.cs@1518] +06/28/2026 14:18:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1187, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:18:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.75 [HeaterCheck.cs@67] +06/28/2026 14:18:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 167.75 [HeaterCheck.cs@67] +06/28/2026 14:18:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.25 [HeaterCheck.cs@67] +06/28/2026 14:18:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 61.041668 with temperature 56.5 [HeaterCheck.cs@67] +06/28/2026 14:18:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 167.25 [HeaterCheck.cs@67] +06/28/2026 14:18:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=62.04166666666667,powderChamber1=62.04166666666667,powderChamber2=62.04166666666667,powderChamber3=62.04166666666667,powderChamber4=62.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:18:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] approaching new target of 62.041668 with temperature 56.85714340209961 [HeaterCheck.cs@88] +06/28/2026 14:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 62.041668 with temperature 56.25 [HeaterCheck.cs@88] +06/28/2026 14:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.46428680419922 [HeaterCheck.cs@67] +06/28/2026 14:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 62.041668 with temperature 57.75 [HeaterCheck.cs@67] +06/28/2026 14:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.35714340209961 [HeaterCheck.cs@67] +06/28/2026 14:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 171.04167 with temperature 155.5 [HeaterCheck.cs@111] +06/28/2026 14:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 62.041668 with temperature 57.75 [HeaterCheck.cs@67] +06/28/2026 14:18:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.14285659790039 [HeaterCheck.cs@67] +06/28/2026 14:18:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 166.25 [HeaterCheck.cs@67] +06/28/2026 14:18:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.17856979370117 [HeaterCheck.cs@67] +06/28/2026 14:18:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.25 [HeaterCheck.cs@67] +06/28/2026 14:18:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.42856979370117 [HeaterCheck.cs@67] +06/28/2026 14:18:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 62.041668 with temperature 57.5 [HeaterCheck.cs@67] +06/28/2026 14:18:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.71428680419922 [HeaterCheck.cs@67] +06/28/2026 14:18:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 62.041668 with temperature 57.21428680419922 [HeaterCheck.cs@67] +06/28/2026 14:18:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=63.04166666666667,powderChamber1=63.04166666666667,powderChamber2=63.04166666666667,powderChamber3=63.04166666666667,powderChamber4=63.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.05624389648438, Elapsed=00:00:30.5326384 [ControlledHeating.cs@486] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.05624389648438 after 00:00:30.5327018 [ControlledHeating.cs@493] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0372587. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634509. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1041895. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1144922. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:18:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 299511327028 (299511327028 @ 0) for mcu = 2481.349210 [28/06/2026 12:32:32] (2495.927725233333 sec) to 301963638431 (from now=301843638431, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 299511327028 (299511327028 @ 0) for mcu = 2481.349210 [28/06/2026 12:32:32] (2495.927725233333 sec) to 301963638431 (from external timestamp, flags=None, requested=301963638431 (301963638431 @ 0) for mcu = 2501.785509 [28/06/2026 12:32:52] (2516.3636535916667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 299511327028 (299511327028 @ 0) for mcu = 2481.349210 [28/06/2026 12:32:32] (2495.927725233333 sec) to 301963638431 (from external timestamp, flags=None, requested=301963638431 (301963638431 @ 0) for mcu = 2501.785509 [28/06/2026 12:32:52] (2516.3636535916667 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:18:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:18:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=49.5 that are outside of set tolerance 10 for current step target 63.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:18:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.04167 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:18:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:18:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.10714340209961 [HeaterCheck.cs@67] +06/28/2026 14:18:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.10714340209961 [HeaterCheck.cs@67] +06/28/2026 14:19:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 59.25 [HeaterCheck.cs@67] +06/28/2026 14:19:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 171.04167 with temperature 158.10714721679688 [HeaterCheck.cs@111] +06/28/2026 14:19:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2115050. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:19:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:19:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:19:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 63.041668 with temperature 58.75 [HeaterCheck.cs@67] +06/28/2026 14:19:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.39285659790039 [HeaterCheck.cs@67] +06/28/2026 14:19:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.42856979370117 [HeaterCheck.cs@67] +06/28/2026 14:19:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.46428680419922 [HeaterCheck.cs@67] +06/28/2026 14:19:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.21428680419922 [HeaterCheck.cs@67] +06/28/2026 14:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.21428680419922 [HeaterCheck.cs@67] +06/28/2026 14:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.39285659790039 [HeaterCheck.cs@67] +06/28/2026 14:19:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.53571319580078 [HeaterCheck.cs@67] +06/28/2026 14:19:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:19:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.42856979370117 [HeaterCheck.cs@67] +06/28/2026 14:19:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:19:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.75 [HeaterCheck.cs@67] +06/28/2026 14:19:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 63.041668 with temperature 58.14285659790039 [HeaterCheck.cs@67] +06/28/2026 14:19:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1752.5360372, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7499641992322728, Elapsed = 00:29:12.5490715, TimeTotal = 17:42:09.8868105, Remaining = 17:12:57.3377390, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:56.9063269, WeightTotalEstimate = 08:10:56.9063269, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:14:39.5361305, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:07.8376457, HeatingElapsed = 00:29:12.5490715, HeatingEstimate = 00:40:47.4639628, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:30:48.9141435, WeightEstimate = 08:10:56.9063269 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:09. coolingEstimate=04:17:07.8376457 [PrintingService.cs@1912] +06/28/2026 14:19:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7499641992322728;StartedAtUtc;00:29:12.5490715;17:42:09.8868105;17:12:57.3377390;False;661;0;0;00:00:00;08:10:56.9063269;08:10:56.9063269;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:14:39.5361305;00:00:00;04:17:07.8376457;00:29:12.5490715;00:40:47.4639628;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:30:48.9141435 [PrintingService.cs@1918] +06/28/2026 14:19:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=172.04166666666669,printChamber1=172.04166666666669,printChamber2=172.04166666666669,printChamber3=172.04166666666669,printChamber4=172.04166666666669 [ControlledHeating.cs@169] +06/28/2026 14:19:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172.04167 with temperature 167.25 [HeaterCheck.cs@67] +06/28/2026 14:19:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172.04167 with temperature 167.25 [HeaterCheck.cs@67] +06/28/2026 14:19:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172.04167 with temperature 167.25 [HeaterCheck.cs@67] +06/28/2026 14:19:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 172.04167 with temperature 167.5 [HeaterCheck.cs@67] +06/28/2026 14:19:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 63.041668 with temperature 59 [HeaterCheck.cs@67] +06/28/2026 14:19:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 172.04167 with temperature 167.25 [HeaterCheck.cs@67] +06/28/2026 14:19:18 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=161.2857208251953 that are outside of set tolerance 10 for current step target 172.04166666666669 and final target 173 [ControlledHeating.cs@205] +06/28/2026 14:19:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 172.04167 with temperature 167.14285278320312 [HeaterCheck.cs@67] +06/28/2026 14:19:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 172.04167 with temperature 167.25 [HeaterCheck.cs@67] +06/28/2026 14:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1759.5374917, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.760950356947863, Elapsed = 00:29:19.5505377, TimeTotal = 17:42:09.8868222, Remaining = 17:12:50.3362845, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:56.9063269, WeightTotalEstimate = 08:10:56.9063269, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:14:39.5361305, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:07.8376457, HeatingElapsed = 00:29:19.5505377, HeatingEstimate = 00:40:40.4625083, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:30:48.9141435, WeightEstimate = 08:10:56.9063269 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:09. coolingEstimate=04:17:07.8376457 [PrintingService.cs@1912] +06/28/2026 14:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.760950356947863;StartedAtUtc;00:29:19.5505377;17:42:09.8868222;17:12:50.3362845;False;661;0;0;00:00:00;08:10:56.9063269;08:10:56.9063269;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:14:39.5361305;00:00:00;04:17:07.8376457;00:29:19.5505377;00:40:40.4625083;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:30:48.9141435 [PrintingService.cs@1918] +06/28/2026 14:19:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=173,printChamber1=173,printChamber2=173,printChamber3=173,printChamber4=173 [ControlledHeating.cs@169] +06/28/2026 14:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1759.5396565, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7609542783542294, Elapsed = 00:29:19.5530463, TimeTotal = 17:42:09.8871660, Remaining = 17:12:50.3341197, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:56.9063269, WeightTotalEstimate = 08:10:56.9063269, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:14:39.5361305, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:07.8376457, HeatingElapsed = 00:29:19.5530463, HeatingEstimate = 00:40:40.4603435, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:30:48.9141435, WeightEstimate = 08:10:56.9063269 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:09. coolingEstimate=04:17:07.8376457 [PrintingService.cs@1912] +06/28/2026 14:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7609542783542294;StartedAtUtc;00:29:19.5530463;17:42:09.8871660;17:12:50.3341197;False;661;0;0;00:00:00;08:10:56.9063269;08:10:56.9063269;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:14:39.5361305;00:00:00;04:17:07.8376457;00:29:19.5530463;00:40:40.4603435;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:30:48.9141435 [PrintingService.cs@1918] +06/28/2026 14:19:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 173 with temperature 167.25 [HeaterCheck.cs@88] +06/28/2026 14:19:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 173 with temperature 167.75 [HeaterCheck.cs@88] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1760.540475, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7625241731328365, Elapsed = 00:29:20.5535292, TimeTotal = 17:42:09.8868304, Remaining = 17:12:49.3333012, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:10:56.9063269, WeightTotalEstimate = 08:10:56.9063269, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:14:39.5361305, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:07.8376457, HeatingElapsed = 00:29:20.5535292, HeatingEstimate = 00:40:39.4595250, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:30:48.9141435, WeightEstimate = 08:10:56.9063269 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:09. coolingEstimate=04:17:07.8376457 [PrintingService.cs@1912] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7625241731328365;StartedAtUtc;00:29:20.5535292;17:42:09.8868304;17:12:49.3333012;False;661;0;0;00:00:00;08:10:56.9063269;08:10:56.9063269;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:14:39.5361305;00:00:00;04:17:07.8376457;00:29:20.5535292;00:40:39.4595250;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:30:48.9141435 [PrintingService.cs@1918] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.90359497070312, Elapsed=00:00:30.1924489 [ControlledHeating.cs@486] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.90359497070312 after 00:00:30.1925801 [ControlledHeating.cs@493] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2262565. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629944. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2908717. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3024128. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:19:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 303175159659 (303175159659 @ 0) for mcu = 2511.881743 [28/06/2026 12:33:02] (2526.459663825 sec) to 305586784948 (from now=305466784948, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 303175159659 (303175159659 @ 0) for mcu = 2511.881743 [28/06/2026 12:33:02] (2526.459663825 sec) to 305586784948 (from external timestamp, flags=None, requested=305586784948 (305586784948 @ 0) for mcu = 2531.978995 [28/06/2026 12:33:22] (2546.5565412333335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 303175159659 (303175159659 @ 0) for mcu = 2511.881743 [28/06/2026 12:33:02] (2526.459663825 sec) to 305586784948 (from external timestamp, flags=None, requested=305586784948 (305586784948 @ 0) for mcu = 2531.978995 [28/06/2026 12:33:22] (2546.5565412333335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=331601, estimate=79.59267019001832 for layer 44, Z=4.401003 [PrintingService.cs@1524] +06/28/2026 14:19:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 3 [PrintingService.cs@1569] +06/28/2026 14:19:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 45, start=0, count=661, Z=4.501003 [PrintingService.cs@1518] +06/28/2026 14:19:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:19:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1203, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:19:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1761.5425857, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.762132807434464, Elapsed = 00:29:21.5558019, TimeTotal = 17:42:55.2028852, Remaining = 17:13:33.6470833, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:21.5558019, HeatingEstimate = 00:40:38.4574143, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.762132807434464;StartedAtUtc;00:29:21.5558019;17:42:55.2028852;17:13:33.6470833;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:21.5558019;00:40:38.4574143;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1762.5448653, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7637048571898495, Elapsed = 00:29:22.5583883, TimeTotal = 17:42:55.2031920, Remaining = 17:13:32.6448037, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:22.5583883, HeatingEstimate = 00:40:37.4551347, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7637048571898495;StartedAtUtc;00:29:22.5583883;17:42:55.2031920;17:13:32.6448037;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:22.5583883;00:40:37.4551347;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1763.5552027, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.765289611297667, Elapsed = 00:29:23.5690782, TimeTotal = 17:42:55.2035445, Remaining = 17:13:31.6344663, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:23.5690782, HeatingEstimate = 00:40:36.4447973, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.765289611297667;StartedAtUtc;00:29:23.5690782;17:42:55.2035445;17:13:31.6344663;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:23.5690782;00:40:36.4447973;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1764.5566378, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.766858588249157, Elapsed = 00:29:24.5696732, TimeTotal = 17:42:55.2027044, Remaining = 17:13:30.6330312, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:24.5696732, HeatingEstimate = 00:40:35.4433622, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.766858588249157;StartedAtUtc;00:29:24.5696732;17:42:55.2027044;17:13:30.6330312;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:24.5696732;00:40:35.4433622;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1765.5566493, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.768426674673018, Elapsed = 00:29:25.5697246, TimeTotal = 17:42:55.2027443, Remaining = 17:13:29.6330197, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:25.5697246, HeatingEstimate = 00:40:34.4433507, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.768426674673018;StartedAtUtc;00:29:25.5697246;17:42:55.2027443;17:13:29.6330197;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:25.5697246;00:40:34.4433507;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1766.5567434, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.769994767274319, Elapsed = 00:29:26.5697777, TimeTotal = 17:42:55.2027033, Remaining = 17:13:28.6329256, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:26.5697777, HeatingEstimate = 00:40:33.4432566, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.769994767274319;StartedAtUtc;00:29:26.5697777;17:42:55.2027033;17:13:28.6329256;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:26.5697777;00:40:33.4432566;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1092378 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:19:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1767.5573602, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.771563737865424, Elapsed = 00:29:27.5703918, TimeTotal = 17:42:55.2027006, Remaining = 17:13:27.6323088, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:27.5703918, HeatingEstimate = 00:40:32.4426398, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.771563737865424;StartedAtUtc;00:29:27.5703918;17:42:55.2027006;17:13:27.6323088;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:27.5703918;00:40:32.4426398;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1768.5675187, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7731483931487686, Elapsed = 00:29:28.5810220, TimeTotal = 17:42:55.2031723, Remaining = 17:13:26.6221503, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:28.5810220, HeatingEstimate = 00:40:31.4324813, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7731483931487686;StartedAtUtc;00:29:28.5810220;17:42:55.2031723;17:13:26.6221503;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:28.5810220;00:40:31.4324813;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1769.5681254, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.774716629547295, Elapsed = 00:29:29.5811548, TimeTotal = 17:42:55.2026984, Remaining = 17:13:25.6215436, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:29.5811548, HeatingEstimate = 00:40:30.4318746, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.774716629547295;StartedAtUtc;00:29:29.5811548;17:42:55.2026984;17:13:25.6215436;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:29.5811548;00:40:30.4318746;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1770.5687339, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7762856014543242, Elapsed = 00:29:30.5817700, TimeTotal = 17:42:55.2027051, Remaining = 17:13:24.6209351, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:30.5817700, HeatingEstimate = 00:40:29.4312661, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7762856014543242;StartedAtUtc;00:29:30.5817700;17:42:55.2027051;17:13:24.6209351;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:30.5817700;00:40:29.4312661;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1771.5691035, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7778546765268324, Elapsed = 00:29:31.5824597, TimeTotal = 17:42:55.2030252, Remaining = 17:13:23.6205655, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:31.5824597, HeatingEstimate = 00:40:28.4308965, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7778546765268324;StartedAtUtc;00:29:31.5824597;17:42:55.2030252;17:13:23.6205655;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:31.5824597;00:40:28.4308965;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9993464. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:19:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9993464. Loops = 44. GC duration = 00:00:00.2981739. SinceCollect=00:01:00.7176938. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:19:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=7072, gen1=1445, gen2=64, LatencyMode=Interactive, FreeMemory=5767757824, Live=489180352, HeapSizeBytes=553735280, FragmentedBytes=64688520, TotalCommittedBytes=563527680, PinnedObjectsCount=25, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:19:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:19:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:19:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (316 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:19:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1772.5706513, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7794251944274317, Elapsed = 00:29:32.5840622, TimeTotal = 17:42:55.2030799, Remaining = 17:13:22.6190177, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:32.5840622, HeatingEstimate = 00:40:27.4293487, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7794251944274317;StartedAtUtc;00:29:32.5840622;17:42:55.2030799;17:13:22.6190177;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:32.5840622;00:40:27.4293487;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.75 [HeaterCheck.cs@67] +06/28/2026 14:19:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1773.5720631, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7809948422117725, Elapsed = 00:29:33.5850978, TimeTotal = 17:42:55.2027037, Remaining = 17:13:21.6176059, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:33.5850978, HeatingEstimate = 00:40:26.4279369, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7809948422117725;StartedAtUtc;00:29:33.5850978;17:42:55.2027037;17:13:21.6176059;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:33.5850978;00:40:26.4279369;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1774.5720937, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7825628940946148, Elapsed = 00:29:34.5851260, TimeTotal = 17:42:55.2027013, Remaining = 17:13:20.6175753, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:34.5851260, HeatingEstimate = 00:40:25.4279063, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7825628940946148;StartedAtUtc;00:29:34.5851260;17:42:55.2027013;17:13:20.6175753;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:34.5851260;00:40:25.4279063;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1775.5716439, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7841301984992803, Elapsed = 00:29:35.5846776, TimeTotal = 17:42:55.2027027, Remaining = 17:13:19.6180251, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:35.5846776, HeatingEstimate = 00:40:24.4283561, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7841301984992803;StartedAtUtc;00:29:35.5846776;17:42:55.2027027;17:13:19.6180251;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:35.5846776;00:40:24.4283561;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1776.5728749, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.785700181092157, Elapsed = 00:29:36.5859380, TimeTotal = 17:42:55.2027321, Remaining = 17:13:18.6167941, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:36.5859380, HeatingEstimate = 00:40:23.4271251, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.785700181092157;StartedAtUtc;00:29:36.5859380;17:42:55.2027321;17:13:18.6167941;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:36.5859380;00:40:23.4271251;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1777.5746285, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.787271025957249, Elapsed = 00:29:37.5877491, TimeTotal = 17:42:55.2027896, Remaining = 17:13:17.6150405, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:37.5877491, HeatingEstimate = 00:40:22.4253715, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.787271025957249;StartedAtUtc;00:29:37.5877491;17:42:55.2027896;17:13:17.6150405;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:37.5877491;00:40:22.4253715;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.75 [HeaterCheck.cs@67] +06/28/2026 14:19:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1778.579498, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.78884663295529, Elapsed = 00:29:38.5925950, TimeTotal = 17:42:55.2027660, Remaining = 17:13:16.6101710, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:38.5925950, HeatingEstimate = 00:40:21.4205020, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.78884663295529;StartedAtUtc;00:29:38.5925950;17:42:55.2027660;17:13:16.6101710;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:38.5925950;00:40:21.4205020;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1779.5799998, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.790415410268625, Elapsed = 00:29:39.5930856, TimeTotal = 17:42:55.2027548, Remaining = 17:13:15.6096692, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:39.5930856, HeatingEstimate = 00:40:20.4200002, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.790415410268625;StartedAtUtc;00:29:39.5930856;17:42:55.2027548;17:13:15.6096692;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:39.5930856;00:40:20.4200002;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1780.5796443, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7919827835798516, Elapsed = 00:29:40.5926797, TimeTotal = 17:42:55.2027044, Remaining = 17:13:14.6100247, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:40.5926797, HeatingEstimate = 00:40:19.4203557, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7919827835798516;StartedAtUtc;00:29:40.5926797;17:42:55.2027044;17:13:14.6100247;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:40.5926797;00:40:19.4203557;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:19:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1781.5801669, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.793551609513957, Elapsed = 00:29:41.5932016, TimeTotal = 17:42:55.2027037, Remaining = 17:13:13.6095021, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:41.5932016, HeatingEstimate = 00:40:18.4198331, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.793551609513957;StartedAtUtc;00:29:41.5932016;17:42:55.2027037;17:13:13.6095021;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:41.5932016;00:40:18.4198331;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 63.041668 with temperature 51 [HeaterCheck.cs@111] +06/28/2026 14:19:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1782.5801619, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7951196080148897, Elapsed = 00:29:42.5931958, TimeTotal = 17:42:55.2027029, Remaining = 17:13:12.6095071, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:42.5931958, HeatingEstimate = 00:40:17.4198381, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7951196080148897;StartedAtUtc;00:29:42.5931958;17:42:55.2027029;17:13:12.6095071;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:42.5931958;00:40:17.4198381;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1783.5833526, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7966926190741934, Elapsed = 00:29:43.5963868, TimeTotal = 17:42:55.2027032, Remaining = 17:13:11.6063164, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:43.5963868, HeatingEstimate = 00:40:16.4166474, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7966926190741934;StartedAtUtc;00:29:43.5963868;17:42:55.2027032;17:13:11.6063164;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:43.5963868;00:40:16.4166474;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1784.5864379, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.798265485898487, Elapsed = 00:29:44.5994862, TimeTotal = 17:42:55.2027173, Remaining = 17:13:10.6032311, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:44.5994862, HeatingEstimate = 00:40:15.4135621, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.798265485898487;StartedAtUtc;00:29:44.5994862;17:42:55.2027173;17:13:10.6032311;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:44.5994862;00:40:15.4135621;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1785.5864004, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.7998335335726607, Elapsed = 00:29:45.5995136, TimeTotal = 17:42:55.2027822, Remaining = 17:13:09.6032686, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:45.5995136, HeatingEstimate = 00:40:14.4135996, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.7998335335726607;StartedAtUtc;00:29:45.5995136;17:42:55.2027822;17:13:09.6032686;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:45.5995136;00:40:14.4135996;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:19:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1786.587209, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.801402714071689, Elapsed = 00:29:46.6002599, TimeTotal = 17:42:55.2027199, Remaining = 17:13:08.6024600, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:46.6002599, HeatingEstimate = 00:40:13.4127910, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.801402714071689;StartedAtUtc;00:29:46.6002599;17:42:55.2027199;17:13:08.6024600;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:46.6002599;00:40:13.4127910;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1787.591393, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8029772526085366, Elapsed = 00:29:47.6044245, TimeTotal = 17:42:55.2027005, Remaining = 17:13:07.5982760, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:47.6044245, HeatingEstimate = 00:40:12.4086070, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8029772526085366;StartedAtUtc;00:29:47.6044245;17:42:55.2027005;17:13:07.5982760;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:47.6044245;00:40:12.4086070;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 63.041668 with temperature 59.5 [HeaterCheck.cs@67] +06/28/2026 14:19:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1788.5932606, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8045481987908643, Elapsed = 00:29:48.6062988, TimeTotal = 17:42:55.2027072, Remaining = 17:13:06.5964084, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:48.6062988, HeatingEstimate = 00:40:11.4067394, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8045481987908643;StartedAtUtc;00:29:48.6062988;17:42:55.2027072;17:13:06.5964084;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:48.6062988;00:40:11.4067394;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1789.5917757, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.806113925413299, Elapsed = 00:29:49.6048450, TimeTotal = 17:42:55.2027383, Remaining = 17:13:05.5978933, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:49.6048450, HeatingEstimate = 00:40:10.4082243, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.806113925413299;StartedAtUtc;00:29:49.6048450;17:42:55.2027383;17:13:05.5978933;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:49.6048450;00:40:10.4082243;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1790.591857, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8076824722319533, Elapsed = 00:29:50.6051965, TimeTotal = 17:42:55.2030085, Remaining = 17:13:04.5978120, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:50.6051965, HeatingEstimate = 00:40:09.4081430, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8076824722319533;StartedAtUtc;00:29:50.6051965;17:42:55.2030085;17:13:04.5978120;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:50.6051965;00:40:09.4081430;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 169 [HeaterCheck.cs@67] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.07244873046875, Elapsed=00:00:30.5075076 [ControlledHeating.cs@486] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.07244873046875 after 00:00:30.5076503 [ControlledHeating.cs@493] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0160099. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628693. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0810175. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0914964. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:19:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 306798306176 (306798306176 @ 0) for mcu = 2542.075200 [28/06/2026 12:33:32] (2556.652551466667 sec) to 309246917803 (from now=309126917803, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 306798306176 (306798306176 @ 0) for mcu = 2542.075200 [28/06/2026 12:33:32] (2556.652551466667 sec) to 309246917803 (from external timestamp, flags=None, requested=309246917803 (309246917803 @ 0) for mcu = 2562.480682 [28/06/2026 12:33:53] (2577.057648358333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 306798306176 (306798306176 @ 0) for mcu = 2542.075200 [28/06/2026 12:33:32] (2556.652551466667 sec) to 309246917803 (from external timestamp, flags=None, requested=309246917803 (309246917803 @ 0) for mcu = 2562.480682 [28/06/2026 12:33:53] (2577.057648358333 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:19:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1791.59145, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8092493732933113, Elapsed = 00:29:51.6044822, TimeTotal = 17:42:55.2027012, Remaining = 17:13:03.5982190, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:51.6044822, HeatingEstimate = 00:40:08.4085500, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8092493732933113;StartedAtUtc;00:29:51.6044822;17:42:55.2027012;17:13:03.5982190;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:51.6044822;00:40:08.4085500;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1792.5916204, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8108179028438944, Elapsed = 00:29:52.6048198, TimeTotal = 17:42:55.2028684, Remaining = 17:13:02.5980486, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:52.6048198, HeatingEstimate = 00:40:07.4083796, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8108179028438944;StartedAtUtc;00:29:52.6048198;17:42:55.2028684;17:13:02.5980486;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:52.6048198;00:40:07.4083796;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1793.596518, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8123933570206696, Elapsed = 00:29:53.6095646, TimeTotal = 17:42:55.2027156, Remaining = 17:13:01.5931510, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:53.6095646, HeatingEstimate = 00:40:06.4034820, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8123933570206696;StartedAtUtc;00:29:53.6095646;17:42:55.2027156;17:13:01.5931510;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:53.6095646;00:40:06.4034820;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:19:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] +06/28/2026 14:19:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1794.5962871, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8139640437438254, Elapsed = 00:29:54.6113294, TimeTotal = 17:42:55.2047113, Remaining = 17:13:00.5933819, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:54.6113294, HeatingEstimate = 00:40:05.4037129, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8139640437438254;StartedAtUtc;00:29:54.6113294;17:42:55.2047113;17:13:00.5933819;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:54.6113294;00:40:05.4037129;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1795.6012303, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8155372764320967, Elapsed = 00:29:55.6146151, TimeTotal = 17:42:55.2030538, Remaining = 17:12:59.5884387, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:55.6146151, HeatingEstimate = 00:40:04.3987697, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8155372764320967;StartedAtUtc;00:29:55.6146151;17:42:55.2030538;17:12:59.5884387;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:55.6146151;00:40:04.3987697;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:19:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1796.6038446, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.817109210575433, Elapsed = 00:29:56.6171161, TimeTotal = 17:42:55.2029405, Remaining = 17:12:58.5858244, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:56.6171161, HeatingEstimate = 00:40:03.3961554, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.817109210575433;StartedAtUtc;00:29:56.6171161;17:42:55.2029405;17:12:58.5858244;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:56.6171161;00:40:03.3961554;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:19:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1797.6067927, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8186852649272494, Elapsed = 00:29:57.6223113, TimeTotal = 17:42:55.2051876, Remaining = 17:12:57.5828763, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:57.6223113, HeatingEstimate = 00:40:02.3932073, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8186852649272494;StartedAtUtc;00:29:57.6223113;17:42:55.2051876;17:12:57.5828763;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:57.6223113;00:40:02.3932073;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:19:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1798.6120545, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8202577421514077, Elapsed = 00:29:58.6250919, TimeTotal = 17:42:55.2027064, Remaining = 17:12:56.5776145, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:58.6250919, HeatingEstimate = 00:40:01.3879455, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8202577421514077;StartedAtUtc;00:29:58.6250919;17:42:55.2027064;17:12:56.5776145;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:58.6250919;00:40:01.3879455;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 173 with temperature 169.25 [HeaterCheck.cs@67] +06/28/2026 14:19:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1799.6168078, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.821833635974867, Elapsed = 00:29:59.6301294, TimeTotal = 17:42:55.2029906, Remaining = 17:12:55.5728612, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:29:59.6301294, HeatingEstimate = 00:40:00.3831922, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:19:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.821833635974867;StartedAtUtc;00:29:59.6301294;17:42:55.2029906;17:12:55.5728612;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:29:59.6301294;00:40:00.3831922;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:19:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:20:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1800.6158474, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8233997060915157, Elapsed = 00:30:00.6288858, TimeTotal = 17:42:55.2027074, Remaining = 17:12:54.5738216, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:00.6288858, HeatingEstimate = 00:39:59.3841526, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8233997060915157;StartedAtUtc;00:30:00.6288858;17:42:55.2027074;17:12:54.5738216;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:00.6288858;00:39:59.3841526;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1801.6167146, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.824969076170577, Elapsed = 00:30:01.6297548, TimeTotal = 17:42:55.2027092, Remaining = 17:12:53.5729544, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:01.6297548, HeatingEstimate = 00:39:58.3832854, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.824969076170577;StartedAtUtc;00:30:01.6297548;17:42:55.2027092;17:12:53.5729544;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:01.6297548;00:39:58.3832854;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1981655. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:20:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:20:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:20:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1802.6160709, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.826536063129004, Elapsed = 00:30:02.6291037, TimeTotal = 17:42:55.2027018, Remaining = 17:12:52.5735981, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:02.6291037, HeatingEstimate = 00:39:57.3839291, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.826536063129004;StartedAtUtc;00:30:02.6291037;17:42:55.2027018;17:12:52.5735981;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:02.6291037;00:39:57.3839291;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 169.25 [HeaterCheck.cs@67] +06/28/2026 14:20:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1803.6181388, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8281073180479197, Elapsed = 00:30:03.6311748, TimeTotal = 17:42:55.2027050, Remaining = 17:12:51.5715302, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:03.6311748, HeatingEstimate = 00:39:56.3818612, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8281073180479197;StartedAtUtc;00:30:03.6311748;17:42:55.2027050;17:12:51.5715302;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:03.6311748;00:39:56.3818612;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1804.6166033, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8296729153424094, Elapsed = 00:30:04.6296376, TimeTotal = 17:42:55.2027033, Remaining = 17:12:50.5730657, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:04.6296376, HeatingEstimate = 00:39:55.3833967, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8296729153424094;StartedAtUtc;00:30:04.6296376;17:42:55.2027033;17:12:50.5730657;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:04.6296376;00:39:55.3833967;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:20:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1805.6156435, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.831239417319632, Elapsed = 00:30:05.6286774, TimeTotal = 17:42:55.2027029, Remaining = 17:12:49.5740255, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:05.6286774, HeatingEstimate = 00:39:54.3843565, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.831239417319632;StartedAtUtc;00:30:05.6286774;17:42:55.2027029;17:12:49.5740255;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:05.6286774;00:39:54.3843565;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.5 [HeaterCheck.cs@67] +06/28/2026 14:20:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1806.6158146, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8328076905759585, Elapsed = 00:30:06.6288468, TimeTotal = 17:42:55.2027012, Remaining = 17:12:48.5738544, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:06.6288468, HeatingEstimate = 00:39:53.3841854, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8328076905759585;StartedAtUtc;00:30:06.6288468;17:42:55.2027012;17:12:48.5738544;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:06.6288468;00:39:53.3841854;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1807.618784, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.834380635580303, Elapsed = 00:30:07.6320009, TimeTotal = 17:42:55.2028859, Remaining = 17:12:47.5708850, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:07.6320009, HeatingEstimate = 00:39:52.3812160, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.834380635580303;StartedAtUtc;00:30:07.6320009;17:42:55.2028859;17:12:47.5708850;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:07.6320009;00:39:52.3812160;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1808.6243314, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.835957066350013, Elapsed = 00:30:08.6373677, TimeTotal = 17:42:55.2027053, Remaining = 17:12:46.5653376, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:08.6373677, HeatingEstimate = 00:39:51.3756686, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.835957066350013;StartedAtUtc;00:30:08.6373677;17:42:55.2027053;17:12:46.5653376;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:08.6373677;00:39:51.3756686;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 173 with temperature 168.75 [HeaterCheck.cs@67] +06/28/2026 14:20:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] +06/28/2026 14:20:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1809.6266564, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8375287116055885, Elapsed = 00:30:09.6396875, TimeTotal = 17:42:55.2027001, Remaining = 17:12:45.5630126, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:09.6396875, HeatingEstimate = 00:39:50.3733436, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8375287116055885;StartedAtUtc;00:30:09.6396875;17:42:55.2027001;17:12:45.5630126;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:09.6396875;00:39:50.3733436;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] +06/28/2026 14:20:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1810.6298496, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8391017288700158, Elapsed = 00:30:10.6428825, TimeTotal = 17:42:55.2027019, Remaining = 17:12:44.5598194, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:10.6428825, HeatingEstimate = 00:39:49.3701504, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8391017288700158;StartedAtUtc;00:30:10.6428825;17:42:55.2027019;17:12:44.5598194;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:10.6428825;00:39:49.3701504;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1811.6348004, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8406786495386602, Elapsed = 00:30:11.6485883, TimeTotal = 17:42:55.2034569, Remaining = 17:12:43.5548686, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:11.6485883, HeatingEstimate = 00:39:48.3651996, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8406786495386602;StartedAtUtc;00:30:11.6485883;17:42:55.2034569;17:12:43.5548686;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:11.6485883;00:39:48.3651996;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1812.6368427, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8422487183650493, Elapsed = 00:30:12.6498816, TimeTotal = 17:42:55.2027079, Remaining = 17:12:42.5528263, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:12.6498816, HeatingEstimate = 00:39:47.3631573, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8422487183650493;StartedAtUtc;00:30:12.6498816;17:42:55.2027079;17:12:42.5528263;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:12.6498816;00:39:47.3631573;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1813.6391251, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.843820526859804, Elapsed = 00:30:13.6523098, TimeTotal = 17:42:55.2028537, Remaining = 17:12:41.5505439, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:13.6523098, HeatingEstimate = 00:39:46.3608749, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.843820526859804;StartedAtUtc;00:30:13.6523098;17:42:55.2028537;17:12:41.5505439;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:13.6523098;00:39:46.3608749;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1814.6430507, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8453947920064677, Elapsed = 00:30:14.6563025, TimeTotal = 17:42:55.2029208, Remaining = 17:12:40.5466183, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:14.6563025, HeatingEstimate = 00:39:45.3569493, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8453947920064677;StartedAtUtc;00:30:14.6563025;17:42:55.2029208;17:12:40.5466183;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:14.6563025;00:39:45.3569493;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1815.6445478, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.846964818587645, Elapsed = 00:30:15.6575840, TimeTotal = 17:42:55.2027052, Remaining = 17:12:39.5451212, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:15.6575840, HeatingEstimate = 00:39:44.3554522, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.846964818587645;StartedAtUtc;00:30:15.6575840;17:42:55.2027052;17:12:39.5451212;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:15.6575840;00:39:44.3554522;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 59 [HeaterCheck.cs@67] +06/28/2026 14:20:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1816.6476133, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.848537705081523, Elapsed = 00:30:16.6606969, TimeTotal = 17:42:55.2027526, Remaining = 17:12:38.5420557, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:16.6606969, HeatingEstimate = 00:39:43.3523867, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.848537705081523;StartedAtUtc;00:30:16.6606969;17:42:55.2027526;17:12:38.5420557;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:16.6606969;00:39:43.3523867;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1817.6492964, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.850108278482579, Elapsed = 00:30:17.6623319, TimeTotal = 17:42:55.2027045, Remaining = 17:12:37.5403726, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:17.6623319, HeatingEstimate = 00:39:42.3507036, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.850108278482579;StartedAtUtc;00:30:17.6623319;17:42:55.2027045;17:12:37.5403726;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:17.6623319;00:39:42.3507036;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1818.648826, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.851675544643885, Elapsed = 00:30:18.6618590, TimeTotal = 17:42:55.2027020, Remaining = 17:12:36.5408430, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:18.6618590, HeatingEstimate = 00:39:41.3511740, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.851675544643885;StartedAtUtc;00:30:18.6618590;17:42:55.2027020;17:12:36.5408430;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:18.6618590;00:39:41.3511740;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 59 [HeaterCheck.cs@67] +06/28/2026 14:20:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 169.5 [HeaterCheck.cs@67] +06/28/2026 14:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1819.649095, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8532439770448117, Elapsed = 00:30:19.6621300, TimeTotal = 17:42:55.2027040, Remaining = 17:12:35.5405740, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:19.6621300, HeatingEstimate = 00:39:40.3509050, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8532439770448117;StartedAtUtc;00:30:19.6621300;17:42:55.2027040;17:12:35.5405740;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:19.6621300;00:39:40.3509050;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.75 [HeaterCheck.cs@67] +06/28/2026 14:20:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1820.6493692, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.854812805417172, Elapsed = 00:30:20.6626608, TimeTotal = 17:42:55.2029606, Remaining = 17:12:34.5402998, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:20.6626608, HeatingEstimate = 00:39:39.3506308, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.854812805417172;StartedAtUtc;00:30:20.6626608;17:42:55.2029606;17:12:34.5402998;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:20.6626608;00:39:39.3506308;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.07144165039062, Elapsed=00:00:30.2104198 [ControlledHeating.cs@486] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.07144165039062 after 00:00:30.2104917 [ControlledHeating.cs@493] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2288807. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631581. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2948081. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3039832. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:20:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 310458439031 (310458439031 @ 0) for mcu = 2572.576884 [28/06/2026 12:34:03] (2587.1536585916665 sec) to 312872343921 (from now=312752343921, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 310458439031 (310458439031 @ 0) for mcu = 2572.576884 [28/06/2026 12:34:03] (2587.1536585916665 sec) to 312872343921 (from external timestamp, flags=None, requested=312872343921 (312872343921 @ 0) for mcu = 2592.693135 [28/06/2026 12:34:23] (2607.269532675 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 310458439031 (310458439031 @ 0) for mcu = 2572.576884 [28/06/2026 12:34:03] (2587.1536585916665 sec) to 312872343921 (from external timestamp, flags=None, requested=312872343921 (312872343921 @ 0) for mcu = 2592.693135 [28/06/2026 12:34:23] (2607.269532675 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1821.6486456, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8563794661764543, Elapsed = 00:30:21.6617979, TimeTotal = 17:42:55.2028213, Remaining = 17:12:33.5410234, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:11:30.4736549, WeightTotalEstimate = 08:11:30.4736549, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:13.1034585, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:19.5862105, HeatingElapsed = 00:30:21.6617979, HeatingEstimate = 00:39:38.3513544, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:22.4814715, WeightEstimate = 08:11:30.4736549 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:32:54. coolingEstimate=04:17:19.5862105 [PrintingService.cs@1912] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8563794661764543;StartedAtUtc;00:30:21.6617979;17:42:55.2028213;17:12:33.5410234;False;661;0;0;00:00:00;08:11:30.4736549;08:11:30.4736549;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:13.1034585;00:00:00;04:17:19.5862105;00:30:21.6617979;00:39:38.3513544;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:22.4814715 [PrintingService.cs@1918] +06/28/2026 14:20:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=444283, estimate=85.71993060498158 for layer 45, Z=4.501003 [PrintingService.cs@1524] +06/28/2026 14:20:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 3 [PrintingService.cs@1569] +06/28/2026 14:20:22 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 46, start=0, count=661, Z=4.6010027 [PrintingService.cs@1518] +06/28/2026 14:20:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1223, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:20:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1822.6485945, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.85605516588779, Elapsed = 00:30:22.6620276, TimeTotal = 17:43:37.4657608, Remaining = 17:13:14.8037332, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:22.6620276, HeatingEstimate = 00:39:37.3514055, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.85605516588779;StartedAtUtc;00:30:22.6620276;17:43:37.4657608;17:13:14.8037332;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:22.6620276;00:39:37.3514055;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.25 [HeaterCheck.cs@67] +06/28/2026 14:20:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1823.6483916, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.857621228010564, Elapsed = 00:30:23.6614377, TimeTotal = 17:43:37.4653738, Remaining = 17:13:13.8039361, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:23.6614377, HeatingEstimate = 00:39:36.3516084, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.857621228010564;StartedAtUtc;00:30:23.6614377;17:43:37.4653738;17:13:13.8039361;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:23.6614377;00:39:36.3516084;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1824.6526192, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8591948006817547, Elapsed = 00:30:24.6656515, TimeTotal = 17:43:37.4653600, Remaining = 17:13:12.7997085, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:24.6656515, HeatingEstimate = 00:39:35.3473808, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8591948006817547;StartedAtUtc;00:30:24.6656515;17:43:37.4653600;17:13:12.7997085;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:24.6656515;00:39:35.3473808;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 173 with temperature 168.25 [HeaterCheck.cs@67] +06/28/2026 14:20:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1825.6529703, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8607630818352527, Elapsed = 00:30:25.6665031, TimeTotal = 17:43:37.4658605, Remaining = 17:13:11.7993574, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:25.6665031, HeatingEstimate = 00:39:34.3470297, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8607630818352527;StartedAtUtc;00:30:25.6665031;17:43:37.4658605;17:13:11.7993574;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:25.6665031;00:39:34.3470297;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1826.6637675, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8623462123031804, Elapsed = 00:30:26.6768026, TimeTotal = 17:43:37.4653628, Remaining = 17:13:10.7885602, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:26.6768026, HeatingEstimate = 00:39:33.3362325, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8623462123031804;StartedAtUtc;00:30:26.6768026;17:43:37.4653628;17:13:10.7885602;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:26.6768026;00:39:33.3362325;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0753796 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:20:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1827.6638795, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8639133520915747, Elapsed = 00:30:27.6769114, TimeTotal = 17:43:37.4653596, Remaining = 17:13:09.7884482, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:27.6769114, HeatingEstimate = 00:39:32.3361205, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8639133520915747;StartedAtUtc;00:30:27.6769114;17:43:37.4653596;17:13:09.7884482;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:27.6769114;00:39:32.3361205;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1828.6641283, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.86548072085336, Elapsed = 00:30:28.6771666, TimeTotal = 17:43:37.4653660, Remaining = 17:13:08.7881994, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:28.6771666, HeatingEstimate = 00:39:31.3358717, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.86548072085336;StartedAtUtc;00:30:28.6771666;17:43:37.4653660;17:13:08.7881994;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:28.6771666;00:39:31.3358717;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1829.6647166, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.867048603792952, Elapsed = 00:30:29.6777496, TimeTotal = 17:43:37.4653607, Remaining = 17:13:07.7876111, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:29.6777496, HeatingEstimate = 00:39:30.3352834, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.867048603792952;StartedAtUtc;00:30:29.6777496;17:43:37.4653607;17:13:07.7876111;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:29.6777496;00:39:30.3352834;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 169.5 [HeaterCheck.cs@67] +06/28/2026 14:20:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 62.25 [HeaterCheck.cs@67] +06/28/2026 14:20:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1830.6693035, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8686228047731266, Elapsed = 00:30:30.6823656, TimeTotal = 17:43:37.4653898, Remaining = 17:13:06.7830242, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:30.6823656, HeatingEstimate = 00:39:29.3306965, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8686228047731266;StartedAtUtc;00:30:30.6823656;17:43:37.4653898;17:13:06.7830242;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:30.6823656;00:39:29.3306965;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1831.669146, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.870189494410491, Elapsed = 00:30:31.6821866, TimeTotal = 17:43:37.4653683, Remaining = 17:13:05.7831817, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:31.6821866, HeatingEstimate = 00:39:28.3308540, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.870189494410491;StartedAtUtc;00:30:31.6821866;17:43:37.4653683;17:13:05.7831817;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:31.6821866;00:39:28.3308540;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1832.6701242, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8717580079451004, Elapsed = 00:30:32.6831724, TimeTotal = 17:43:37.4653759, Remaining = 17:13:04.7822035, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:32.6831724, HeatingEstimate = 00:39:27.3298758, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8717580079451004;StartedAtUtc;00:30:32.6831724;17:43:37.4653759;17:13:04.7822035;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:32.6831724;00:39:27.3298758;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9885841. Loops = 44. [McuMovementClient.cs@475] +06/28/2026 14:20:32 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (156 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:20:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1833.6717441, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8733277866472613, Elapsed = 00:30:33.6849705, TimeTotal = 17:43:37.4655541, Remaining = 17:13:03.7805836, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:33.6849705, HeatingEstimate = 00:39:26.3282559, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8733277866472613;StartedAtUtc;00:30:33.6849705;17:43:37.4655541;17:13:03.7805836;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:33.6849705;00:39:26.3282559;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.75 [HeaterCheck.cs@67] +06/28/2026 14:20:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:10.9885841. Loops = 44. GC duration = 00:00:01.9201434. SinceCollect=00:01:02.3329716. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:20:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=7209, gen1=1460, gen2=66, LatencyMode=Interactive, FreeMemory=5770510336, Live=490346280, HeapSizeBytes=490930280, FragmentedBytes=1564224, TotalCommittedBytes=492371968, PinnedObjectsCount=1, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:20:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:20:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:20:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1834.671954, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.874895334455077, Elapsed = 00:30:34.6853445, TimeTotal = 17:43:37.4657182, Remaining = 17:13:02.7803737, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:34.6853445, HeatingEstimate = 00:39:25.3280460, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.874895334455077;StartedAtUtc;00:30:34.6853445;17:43:37.4657182;17:13:02.7803737;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:34.6853445;00:39:25.3280460;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168.5 [HeaterCheck.cs@67] +06/28/2026 14:20:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1835.6721447, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8764621142017153, Elapsed = 00:30:35.6852144, TimeTotal = 17:43:37.4653974, Remaining = 17:13:01.7801830, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:35.6852144, HeatingEstimate = 00:39:24.3278553, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8764621142017153;StartedAtUtc;00:30:35.6852144;17:43:37.4653974;17:13:01.7801830;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:35.6852144;00:39:24.3278553;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168.5 [HeaterCheck.cs@67] +06/28/2026 14:20:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1836.6742996, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8780324072123147, Elapsed = 00:30:36.6873346, TimeTotal = 17:43:37.4653627, Remaining = 17:13:00.7780281, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:36.6873346, HeatingEstimate = 00:39:23.3257004, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8780324072123147;StartedAtUtc;00:30:36.6873346;17:43:37.4653627;17:13:00.7780281;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:36.6873346;00:39:23.3257004;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1837.6726202, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.879597261013277, Elapsed = 00:30:37.6859944, TimeTotal = 17:43:37.4657019, Remaining = 17:12:59.7797075, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:37.6859944, HeatingEstimate = 00:39:22.3273798, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.879597261013277;StartedAtUtc;00:30:37.6859944;17:43:37.4657019;17:12:59.7797075;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:37.6859944;00:39:22.3273798;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1838.6714405, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.881162119095655, Elapsed = 00:30:38.6846422, TimeTotal = 17:43:37.4655294, Remaining = 17:12:58.7808872, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:38.6846422, HeatingEstimate = 00:39:21.3285595, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.881162119095655;StartedAtUtc;00:30:38.6846422;17:43:37.4655294;17:12:58.7808872;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:38.6846422;00:39:21.3285595;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1839.6734578, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.882731995308959, Elapsed = 00:30:39.6864926, TimeTotal = 17:43:37.4653625, Remaining = 17:12:57.7788699, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:39.6864926, HeatingEstimate = 00:39:20.3265422, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.882731995308959;StartedAtUtc;00:30:39.6864926;17:43:37.4653625;17:12:57.7788699;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:39.6864926;00:39:20.3265422;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1840.6778068, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8843057866730692, Elapsed = 00:30:40.6908465, TimeTotal = 17:43:37.4653674, Remaining = 17:12:56.7745209, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:40.6908465, HeatingEstimate = 00:39:19.3221932, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8843057866730692;StartedAtUtc;00:30:40.6908465;17:43:37.4653674;17:12:56.7745209;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:40.6908465;00:39:19.3221932;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1841.6781284, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8858732625079293, Elapsed = 00:30:41.6911699, TimeTotal = 17:43:37.4653692, Remaining = 17:12:55.7741993, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:41.6911699, HeatingEstimate = 00:39:18.3218716, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8858732625079293;StartedAtUtc;00:30:41.6911699;17:43:37.4653692;17:12:55.7741993;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:41.6911699;00:39:18.3218716;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1842.6766162, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8874389872581925, Elapsed = 00:30:42.6903971, TimeTotal = 17:43:37.4661086, Remaining = 17:12:54.7757115, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:42.6903971, HeatingEstimate = 00:39:17.3233838, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8874389872581925;StartedAtUtc;00:30:42.6903971;17:43:37.4661086;17:12:54.7757115;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:42.6903971;00:39:17.3233838;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1843.6817304, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8890133963592364, Elapsed = 00:30:43.6951342, TimeTotal = 17:43:37.4657315, Remaining = 17:12:53.7705973, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:43.6951342, HeatingEstimate = 00:39:16.3182696, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8890133963592364;StartedAtUtc;00:30:43.6951342;17:43:37.4657315;17:12:53.7705973;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:43.6951342;00:39:16.3182696;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168.5 [HeaterCheck.cs@67] +06/28/2026 14:20:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:20:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1844.6800408, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8905771633072264, Elapsed = 00:30:44.6930801, TimeTotal = 17:43:37.4653670, Remaining = 17:12:52.7722869, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:44.6930801, HeatingEstimate = 00:39:15.3199592, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8905771633072264;StartedAtUtc;00:30:44.6930801;17:43:37.4653670;17:12:52.7722869;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:44.6930801;00:39:15.3199592;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 63.041668 with temperature 52 [HeaterCheck.cs@111] +06/28/2026 14:20:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1845.6802478, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.892144451502508, Elapsed = 00:30:45.6932836, TimeTotal = 17:43:37.4653635, Remaining = 17:12:51.7720799, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:45.6932836, HeatingEstimate = 00:39:14.3197522, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.892144451502508;StartedAtUtc;00:30:45.6932836;17:43:37.4653635;17:12:51.7720799;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:45.6932836;00:39:14.3197522;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1846.6822607, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.893714578769481, Elapsed = 00:30:46.6952991, TimeTotal = 17:43:37.4653661, Remaining = 17:12:50.7700670, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:46.6952991, HeatingEstimate = 00:39:13.3177393, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.893714578769481;StartedAtUtc;00:30:46.6952991;17:43:37.4653661;17:12:50.7700670;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:46.6952991;00:39:13.3177393;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1847.6796915, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.895277516593019, Elapsed = 00:30:47.6927263, TimeTotal = 17:43:37.4653625, Remaining = 17:12:49.7726362, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:47.6927263, HeatingEstimate = 00:39:12.3203085, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.895277516593019;StartedAtUtc;00:30:47.6927263;17:43:37.4653625;17:12:49.7726362;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:47.6927263;00:39:12.3203085;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1848.6821653, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.896848368358339, Elapsed = 00:30:48.6952042, TimeTotal = 17:43:37.4653666, Remaining = 17:12:48.7701624, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:48.6952042, HeatingEstimate = 00:39:11.3178347, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.896848368358339;StartedAtUtc;00:30:48.6952042;17:43:37.4653666;17:12:48.7701624;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:48.6952042;00:39:11.3178347;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1849.6819339, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8984149691382295, Elapsed = 00:30:49.6949690, TimeTotal = 17:43:37.4653628, Remaining = 17:12:47.7703938, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:49.6949690, HeatingEstimate = 00:39:10.3180661, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8984149691382295;StartedAtUtc;00:30:49.6949690;17:43:37.4653628;17:12:47.7703938;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:49.6949690;00:39:10.3180661;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1850.6822254, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.8999823920252292, Elapsed = 00:30:50.6952585, TimeTotal = 17:43:37.4653608, Remaining = 17:12:46.7701023, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:50.6952585, HeatingEstimate = 00:39:09.3177746, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8999823920252292;StartedAtUtc;00:30:50.6952585;17:43:37.4653608;17:12:46.7701023;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:50.6952585;00:39:09.3177746;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.13059997558594, Elapsed=00:00:30.1208540 [ControlledHeating.cs@486] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.13059997558594 after 00:00:30.1237142 [ControlledHeating.cs@493] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:17.0202929. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1851.6839753, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9015537809841874, Elapsed = 00:30:51.6981111, TimeTotal = 17:43:37.4664635, Remaining = 17:12:45.7683524, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:51.6981111, HeatingEstimate = 00:39:08.3160247, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9015537809841874;StartedAtUtc;00:30:51.6981111;17:43:37.4664635;17:12:45.7683524;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:51.6981111;00:39:08.3160247;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0615536. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:17.0866027. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:17.1008203. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:20:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 314083865149 (314083865149 @ 0) for mcu = 2602.789332 [28/06/2026 12:34:33] (2617.3655429083333 sec) to 316487863716 (from now=316367863716, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 314083865149 (314083865149 @ 0) for mcu = 2602.789332 [28/06/2026 12:34:33] (2617.3655429083333 sec) to 316487863716 (from external timestamp, flags=None, requested=316487863716 (316487863716 @ 0) for mcu = 2622.823026 [28/06/2026 12:34:53] (2637.3988643 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 314083865149 (314083865149 @ 0) for mcu = 2602.789332 [28/06/2026 12:34:33] (2617.3655429083333 sec) to 316487863716 (from external timestamp, flags=None, requested=316487863716 (316487863716 @ 0) for mcu = 2622.823026 [28/06/2026 12:34:53] (2637.3988643 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:20:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1852.6908139, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9031300102406767, Elapsed = 00:30:52.7039929, TimeTotal = 17:43:37.4655067, Remaining = 17:12:44.7615138, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:52.7039929, HeatingEstimate = 00:39:07.3091861, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9031300102406767;StartedAtUtc;00:30:52.7039929;17:43:37.4655067;17:12:44.7615138;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:52.7039929;00:39:07.3091861;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1853.694043, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.904701848505533, Elapsed = 00:30:53.7070966, TimeTotal = 17:43:37.4653813, Remaining = 17:12:43.7582847, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:53.7070966, HeatingEstimate = 00:39:06.3059570, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.904701848505533;StartedAtUtc;00:30:53.7070966;17:43:37.4653813;17:12:43.7582847;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:53.7070966;00:39:06.3059570;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1854.6938178, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.906268439526451, Elapsed = 00:30:54.7068548, TimeTotal = 17:43:37.4653647, Remaining = 17:12:42.7585099, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:54.7068548, HeatingEstimate = 00:39:05.3061822, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.906268439526451;StartedAtUtc;00:30:54.7068548;17:43:37.4653647;17:12:42.7585099;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:54.7068548;00:39:05.3061822;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1855.6914933, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.907831805213091, Elapsed = 00:30:55.7045559, TimeTotal = 17:43:37.4653903, Remaining = 17:12:41.7608344, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:55.7045559, HeatingEstimate = 00:39:04.3085067, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.907831805213091;StartedAtUtc;00:30:55.7045559;17:43:37.4653903;17:12:41.7608344;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:55.7045559;00:39:04.3085067;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1856.6931666, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9094013618451324, Elapsed = 00:30:56.7062065, TimeTotal = 17:43:37.4653676, Remaining = 17:12:40.7591611, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:56.7062065, HeatingEstimate = 00:39:03.3068334, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9094013618451324;StartedAtUtc;00:30:56.7062065;17:43:37.4653676;17:12:40.7591611;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:56.7062065;00:39:03.3068334;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1857.6919446, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9109664082562, Elapsed = 00:30:57.7049793, TimeTotal = 17:43:37.4653624, Remaining = 17:12:39.7603831, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:57.7049793, HeatingEstimate = 00:39:02.3080554, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9109664082562;StartedAtUtc;00:30:57.7049793;17:43:37.4653624;17:12:39.7603831;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:57.7049793;00:39:02.3080554;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1858.6991232, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9125454004167657, Elapsed = 00:30:58.7126669, TimeTotal = 17:43:37.4658714, Remaining = 17:12:38.7532045, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:58.7126669, HeatingEstimate = 00:39:01.3008768, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9125454004167657;StartedAtUtc;00:30:58.7126669;17:43:37.4658714;17:12:38.7532045;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:58.7126669;00:39:01.3008768;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:20:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1859.7015676, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.91412066732874, Elapsed = 00:30:59.7180479, TimeTotal = 17:43:37.4688080, Remaining = 17:12:37.7507601, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:30:59.7180479, HeatingEstimate = 00:39:00.2984324, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:20:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.91412066732874;StartedAtUtc;00:30:59.7180479;17:43:37.4688080;17:12:37.7507601;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:30:59.7180479;00:39:00.2984324;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1860.7053591, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.915688340403485, Elapsed = 00:31:00.7183968, TimeTotal = 17:43:37.4653654, Remaining = 17:12:36.7469686, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:00.7183968, HeatingEstimate = 00:38:59.2946409, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.915688340403485;StartedAtUtc;00:31:00.7183968;17:43:37.4653654;17:12:36.7469686;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:00.7183968;00:38:59.2946409;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1861.7040401, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.917255743979847, Elapsed = 00:31:01.7187220, TimeTotal = 17:43:37.4670096, Remaining = 17:12:35.7482876, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:01.7187220, HeatingEstimate = 00:38:58.2959599, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.917255743979847;StartedAtUtc;00:31:01.7187220;17:43:37.4670096;17:12:35.7482876;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:01.7187220;00:38:58.2959599;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:21:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1862.7033334, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.918819119875467, Elapsed = 00:31:02.7163812, TimeTotal = 17:43:37.4653755, Remaining = 17:12:34.7489943, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:02.7163812, HeatingEstimate = 00:38:57.2966666, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.918819119875467;StartedAtUtc;00:31:02.7163812;17:43:37.4653755;17:12:34.7489943;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:02.7163812;00:38:57.2966666;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9858009. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:28.2069886. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:21:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:21:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:21:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:21:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1863.7107689, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9204000261512215, Elapsed = 00:31:03.7253194, TimeTotal = 17:43:37.4668782, Remaining = 17:12:33.7415588, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:03.7253194, HeatingEstimate = 00:38:56.2892311, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9204000261512215;StartedAtUtc;00:31:03.7253194;17:43:37.4668782;17:12:33.7415588;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:03.7253194;00:38:56.2892311;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 173 with temperature 168 [HeaterCheck.cs@67] +06/28/2026 14:21:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1864.7132435, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9219691376811623, Elapsed = 00:31:04.7266533, TimeTotal = 17:43:37.4657375, Remaining = 17:12:32.7390842, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:04.7266533, HeatingEstimate = 00:38:55.2867565, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9219691376811623;StartedAtUtc;00:31:04.7266533;17:43:37.4657375;17:12:32.7390842;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:04.7266533;00:38:55.2867565;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1865.7154133, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.923539099169771, Elapsed = 00:31:05.7285551, TimeTotal = 17:43:37.4654695, Remaining = 17:12:31.7369144, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:05.7285551, HeatingEstimate = 00:38:54.2845867, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.923539099169771;StartedAtUtc;00:31:05.7285551;17:43:37.4654695;17:12:31.7369144;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:05.7285551;00:38:54.2845867;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 58.75 [HeaterCheck.cs@67] +06/28/2026 14:21:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1866.7157576, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9251064450718767, Elapsed = 00:31:06.7287924, TimeTotal = 17:43:37.4653625, Remaining = 17:12:30.7365701, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:06.7287924, HeatingEstimate = 00:38:53.2842424, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9251064450718767;StartedAtUtc;00:31:06.7287924;17:43:37.4653625;17:12:30.7365701;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:06.7287924;00:38:53.2842424;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1867.7176208, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.926676331525701, Elapsed = 00:31:07.7306541, TimeTotal = 17:43:37.4653610, Remaining = 17:12:29.7347069, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:07.7306541, HeatingEstimate = 00:38:52.2823792, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.926676331525701;StartedAtUtc;00:31:07.7306541;17:43:37.4653610;17:12:29.7347069;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:07.7306541;00:38:52.2823792;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1868.7164395, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.928241448863081, Elapsed = 00:31:08.7294723, TimeTotal = 17:43:37.4653605, Remaining = 17:12:28.7358882, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:08.7294723, HeatingEstimate = 00:38:51.2835605, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.928241448863081;StartedAtUtc;00:31:08.7294723;17:43:37.4653605;17:12:28.7358882;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:08.7294723;00:38:51.2835605;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1869.718234, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.929811231773109, Elapsed = 00:31:09.7312680, TimeTotal = 17:43:37.4653617, Remaining = 17:12:27.7340937, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:09.7312680, HeatingEstimate = 00:38:50.2817660, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.929811231773109;StartedAtUtc;00:31:09.7312680;17:43:37.4653617;17:12:27.7340937;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:09.7312680;00:38:50.2817660;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1870.7201555, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9313812182512673, Elapsed = 00:31:10.7331937, TimeTotal = 17:43:37.4653659, Remaining = 17:12:26.7321722, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:10.7331937, HeatingEstimate = 00:38:49.2798445, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9313812182512673;StartedAtUtc;00:31:10.7331937;17:43:37.4653659;17:12:26.7321722;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:10.7331937;00:38:49.2798445;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1871.7207724, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.932949166697399, Elapsed = 00:31:11.7338189, TimeTotal = 17:43:37.4653742, Remaining = 17:12:25.7315553, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:01.7793280, WeightTotalEstimate = 08:12:01.7793280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:15:44.4091316, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:30.5431961, HeatingElapsed = 00:31:11.7338189, HeatingEstimate = 00:38:48.2792276, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:31:53.7871446, WeightEstimate = 08:12:01.7793280 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:33:37. coolingEstimate=04:17:30.5431961 [PrintingService.cs@1912] +06/28/2026 14:21:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.932949166697399;StartedAtUtc;00:31:11.7338189;17:43:37.4653742;17:12:25.7315553;False;661;0;0;00:00:00;08:12:01.7793280;08:12:01.7793280;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:15:44.4091316;00:00:00;04:17:30.5431961;00:31:11.7338189;00:38:48.2792276;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:31:53.7871446 [PrintingService.cs@1918] +06/28/2026 14:21:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=331680, estimate=79.77490146195682 for layer 46, Z=4.6010027 [PrintingService.cs@1524] +06/28/2026 14:21:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 38, island count 3 [PrintingService.cs@1569] +06/28/2026 14:21:12 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 47, start=0, count=661, Z=4.701003 [PrintingService.cs@1518] +06/28/2026 14:21:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1872.7211586, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9327291099173323, Elapsed = 00:31:12.7342382, TimeTotal = 17:44:16.3661358, Remaining = 17:13:03.6318976, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:12.7342382, HeatingEstimate = 00:38:47.2788414, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9327291099173323;StartedAtUtc;00:31:12.7342382;17:44:16.3661358;17:13:03.6318976;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:12.7342382;00:38:47.2788414;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1248, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:21:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1873.7221793, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9342995049415617, Elapsed = 00:31:13.7370891, TimeTotal = 17:44:16.3679660, Remaining = 17:13:02.6308769, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:13.7370891, HeatingEstimate = 00:38:46.2778207, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9342995049415617;StartedAtUtc;00:31:13.7370891;17:44:16.3679660;17:13:02.6308769;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:13.7370891;00:38:46.2778207;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1874.7239422, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.935865752981595, Elapsed = 00:31:14.7371894, TimeTotal = 17:44:16.3663034, Remaining = 17:13:01.6291140, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:14.7371894, HeatingEstimate = 00:38:45.2760578, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.935865752981595;StartedAtUtc;00:31:14.7371894;17:44:16.3663034;17:13:01.6291140;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:14.7371894;00:38:45.2760578;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1875.7249706, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.937433122678349, Elapsed = 00:31:15.7380498, TimeTotal = 17:44:16.3661354, Remaining = 17:13:00.6280856, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:15.7380498, HeatingEstimate = 00:38:44.2750294, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.937433122678349;StartedAtUtc;00:31:15.7380498;17:44:16.3661354;17:13:00.6280856;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:15.7380498;00:38:44.2750294;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1876.7257811, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9390003485953975, Elapsed = 00:31:16.7388222, TimeTotal = 17:44:16.3660973, Remaining = 17:12:59.6272751, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:16.7388222, HeatingEstimate = 00:38:43.2742189, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9390003485953975;StartedAtUtc;00:31:16.7388222;17:44:16.3660973;17:12:59.6272751;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:16.7388222;00:38:43.2742189;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 63.041668 with temperature 59.25 [HeaterCheck.cs@67] +06/28/2026 14:21:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1877.7239131, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9405636369703427, Elapsed = 00:31:17.7370852, TimeTotal = 17:44:16.3662283, Remaining = 17:12:58.6291431, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:17.7370852, HeatingEstimate = 00:38:42.2760869, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9405636369703427;StartedAtUtc;00:31:17.7370852;17:44:16.3662283;17:12:58.6291431;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:17.7370852;00:38:42.2760869;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1878.7271706, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9421345470344447, Elapsed = 00:31:18.7402073, TimeTotal = 17:44:16.3660929, Remaining = 17:12:57.6258856, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:18.7402073, HeatingEstimate = 00:38:41.2728294, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9421345470344447;StartedAtUtc;00:31:18.7402073;17:44:16.3660929;17:12:57.6258856;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:18.7402073;00:38:41.2728294;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1879.7303318, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.943705525165868, Elapsed = 00:31:19.7433771, TimeTotal = 17:44:16.3661015, Remaining = 17:12:56.6227244, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:19.7433771, HeatingEstimate = 00:38:40.2696682, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.943705525165868;StartedAtUtc;00:31:19.7433771;17:44:16.3661015;17:12:56.6227244;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:19.7433771;00:38:40.2696682;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1880.7350719, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.945284747815289, Elapsed = 00:31:20.7519234, TimeTotal = 17:44:16.3699077, Remaining = 17:12:55.6179843, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:20.7519234, HeatingEstimate = 00:38:39.2649281, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.945284747815289;StartedAtUtc;00:31:20.7519234;17:44:16.3699077;17:12:55.6179843;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:20.7519234;00:38:39.2649281;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1881.7409113, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9468541172548024, Elapsed = 00:31:21.7539535, TimeTotal = 17:44:16.3660984, Remaining = 17:12:54.6121449, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:21.7539535, HeatingEstimate = 00:38:38.2590887, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9468541172548024;StartedAtUtc;00:31:21.7539535;17:44:16.3660984;17:12:54.6121449;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:21.7539535;00:38:38.2590887;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.11172485351562, Elapsed=00:00:30.2052459 [ControlledHeating.cs@486] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.11172485351562 after 00:00:30.2053446 [ControlledHeating.cs@493] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.2284137. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625976. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.2982169. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:47.3138133. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:21:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 317699384944 (317699384944 @ 0) for mcu = 2632.919201 [28/06/2026 12:35:03] (2647.494874533333 sec) to 320113396789 (from now=319993396789, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 317699384944 (317699384944 @ 0) for mcu = 2632.919201 [28/06/2026 12:35:03] (2647.494874533333 sec) to 320113396789 (from external timestamp, flags=None, requested=320113396789 (320113396789 @ 0) for mcu = 2653.036332 [28/06/2026 12:35:23] (2667.6116399083335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 317699384944 (317699384944 @ 0) for mcu = 2632.919201 [28/06/2026 12:35:03] (2647.494874533333 sec) to 320113396789 (from external timestamp, flags=None, requested=320113396789 (320113396789 @ 0) for mcu = 2653.036332 [28/06/2026 12:35:23] (2667.6116399083335 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1882.7526653, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9484385753930358, Elapsed = 00:31:22.7657316, TimeTotal = 17:44:16.3661225, Remaining = 17:12:53.6003909, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:22.7657316, HeatingEstimate = 00:38:37.2473347, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9484385753930358;StartedAtUtc;00:31:22.7657316;17:44:16.3661225;17:12:53.6003909;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:22.7657316;00:38:37.2473347;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1883.7598763, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9500158367517897, Elapsed = 00:31:23.7729125, TimeTotal = 17:44:16.3660924, Remaining = 17:12:52.5931799, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:23.7729125, HeatingEstimate = 00:38:36.2401237, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9500158367517897;StartedAtUtc;00:31:23.7729125;17:44:16.3660924;17:12:52.5931799;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:23.7729125;00:38:36.2401237;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1884.7635754, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9515881820256764, Elapsed = 00:31:24.7769655, TimeTotal = 17:44:16.3664463, Remaining = 17:12:51.5894808, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:24.7769655, HeatingEstimate = 00:38:35.2364246, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9515881820256764;StartedAtUtc;00:31:24.7769655;17:44:16.3664463;17:12:51.5894808;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:24.7769655;00:38:35.2364246;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1885.7657935, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9531571327789363, Elapsed = 00:31:25.7788300, TimeTotal = 17:44:16.3660927, Remaining = 17:12:50.5872627, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:25.7788300, HeatingEstimate = 00:38:34.2342065, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9531571327789363;StartedAtUtc;00:31:25.7788300;17:44:16.3660927;17:12:50.5872627;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:25.7788300;00:38:34.2342065;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1886.7675387, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9547260177472308, Elapsed = 00:31:26.7806656, TimeTotal = 17:44:16.3661831, Remaining = 17:12:49.5855175, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:26.7806656, HeatingEstimate = 00:38:33.2324613, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9547260177472308;StartedAtUtc;00:31:26.7806656;17:44:16.3661831;17:12:49.5855175;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:26.7806656;00:38:33.2324613;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0114560 ~ 5.97 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:21:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1887.7682275, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.956293674198438, Elapsed = 00:31:27.7817250, TimeTotal = 17:44:16.3665537, Remaining = 17:12:48.5848287, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:27.7817250, HeatingEstimate = 00:38:32.2317725, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.956293674198438;StartedAtUtc;00:31:27.7817250;17:44:16.3665537;17:12:48.5848287;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:27.7817250;00:38:32.2317725;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1888.768376, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.957859222863785, Elapsed = 00:31:28.7814139, TimeTotal = 17:44:16.3660941, Remaining = 17:12:47.5846802, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:28.7814139, HeatingEstimate = 00:38:31.2316240, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.957859222863785;StartedAtUtc;00:31:28.7814139;17:44:16.3660941;17:12:47.5846802;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:28.7814139;00:38:31.2316240;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1889.7687662, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9594258421149053, Elapsed = 00:31:29.7817999, TimeTotal = 17:44:16.3660899, Remaining = 17:12:46.5842900, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:29.7817999, HeatingEstimate = 00:38:30.2312338, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9594258421149053;StartedAtUtc;00:31:29.7817999;17:44:16.3660899;17:12:46.5842900;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:29.7817999;00:38:30.2312338;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1890.7691114, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.960992399405588, Elapsed = 00:31:30.7821465, TimeTotal = 17:44:16.3660913, Remaining = 17:12:45.5839448, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:30.7821465, HeatingEstimate = 00:38:29.2308886, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.960992399405588;StartedAtUtc;00:31:30.7821465;17:44:16.3660913;17:12:45.5839448;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:30.7821465;00:38:29.2308886;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1891.7686448, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9625576785672774, Elapsed = 00:31:31.7816768, TimeTotal = 17:44:16.3660882, Remaining = 17:12:44.5844114, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:31.7816768, HeatingEstimate = 00:38:28.2313552, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9625576785672774;StartedAtUtc;00:31:31.7816768;17:44:16.3660882;17:12:44.5844114;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:31.7816768;00:38:28.2313552;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1892.7679924, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.964122672993954, Elapsed = 00:31:32.7810254, TimeTotal = 17:44:16.3660892, Remaining = 17:12:43.5850638, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:32.7810254, HeatingEstimate = 00:38:27.2320076, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.964122672993954;StartedAtUtc;00:31:32.7810254;17:44:16.3660892;17:12:43.5850638;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:32.7810254;00:38:27.2320076;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9932455. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.4185210. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:21:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:21:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:21:32 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (351 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:21:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1893.768248, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.965689097719459, Elapsed = 00:31:33.7812875, TimeTotal = 17:44:16.3660957, Remaining = 17:12:42.5848082, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:33.7812875, HeatingEstimate = 00:38:26.2317520, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.965689097719459;StartedAtUtc;00:31:33.7812875;17:44:16.3660957;17:12:42.5848082;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:33.7812875;00:38:26.2317520;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1894.7770309, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9672688626448074, Elapsed = 00:31:34.7900679, TimeTotal = 17:44:16.3660932, Remaining = 17:12:41.5760253, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:34.7900679, HeatingEstimate = 00:38:25.2229691, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9672688626448074;StartedAtUtc;00:31:34.7900679;17:44:16.3660932;17:12:41.5760253;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:34.7900679;00:38:25.2229691;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1895.7807001, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.968840622632544, Elapsed = 00:31:35.7937367, TimeTotal = 17:44:16.3660928, Remaining = 17:12:40.5723561, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:35.7937367, HeatingEstimate = 00:38:24.2192999, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.968840622632544;StartedAtUtc;00:31:35.7937367;17:44:16.3660928;17:12:40.5723561;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:35.7937367;00:38:24.2192999;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1896.7802348, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9704059156824774, Elapsed = 00:31:36.7932761, TimeTotal = 17:44:16.3660975, Remaining = 17:12:39.5728214, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:36.7932761, HeatingEstimate = 00:38:23.2197652, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9704059156824774;StartedAtUtc;00:31:36.7932761;17:44:16.3660975;17:12:39.5728214;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:36.7932761;00:38:23.2197652;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1897.7807574, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9719732330644613, Elapsed = 00:31:37.7941175, TimeTotal = 17:44:16.3664163, Remaining = 17:12:38.5722988, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:37.7941175, HeatingEstimate = 00:38:22.2192426, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9719732330644613;StartedAtUtc;00:31:37.7941175;17:44:16.3664163;17:12:38.5722988;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:37.7941175;00:38:22.2192426;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1898.7803403, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9735381063998623, Elapsed = 00:31:38.7933792, TimeTotal = 17:44:16.3660951, Remaining = 17:12:37.5727159, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:38.7933792, HeatingEstimate = 00:38:21.2196597, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9735381063998623;StartedAtUtc;00:31:38.7933792;17:44:16.3660951;17:12:37.5727159;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:38.7933792;00:38:21.2196597;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=64.04166666666667,powderChamber1=64.04166666666667,powderChamber2=64.04166666666667,powderChamber3=64.04166666666667,powderChamber4=64.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:21:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1899.7798654, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.975103391708889, Elapsed = 00:31:39.7929138, TimeTotal = 17:44:16.3661046, Remaining = 17:12:36.5731908, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:39.7929138, HeatingEstimate = 00:38:20.2201346, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.975103391708889;StartedAtUtc;00:31:39.7929138;17:44:16.3661046;17:12:36.5731908;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:39.7929138;00:38:20.2201346;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1900.7800975, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.976669760639062, Elapsed = 00:31:40.7931399, TimeTotal = 17:44:16.3660986, Remaining = 17:12:35.5729587, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:40.7931399, HeatingEstimate = 00:38:19.2199025, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.976669760639062;StartedAtUtc;00:31:40.7931399;17:44:16.3660986;17:12:35.5729587;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:40.7931399;00:38:19.2199025;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1901.7840073, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9782418958904566, Elapsed = 00:31:41.7970483, TimeTotal = 17:44:16.3660972, Remaining = 17:12:34.5690489, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:41.7970483, HeatingEstimate = 00:38:18.2159927, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9782418958904566;StartedAtUtc;00:31:41.7970483;17:44:16.3660972;17:12:34.5690489;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:41.7970483;00:38:18.2159927;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1902.7840505, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.979807977509315, Elapsed = 00:31:42.7970911, TimeTotal = 17:44:16.3660968, Remaining = 17:12:33.5690057, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:42.7970911, HeatingEstimate = 00:38:17.2159495, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.979807977509315;StartedAtUtc;00:31:42.7970911;17:44:16.3660968;17:12:33.5690057;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:42.7970911;00:38:17.2159495;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1903.7840545, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.981373999867478, Elapsed = 00:31:43.7970961, TimeTotal = 17:44:16.3660978, Remaining = 17:12:32.5690017, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:43.7970961, HeatingEstimate = 00:38:16.2159455, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.981373999867478;StartedAtUtc;00:31:43.7970961;17:44:16.3660978;17:12:32.5690017;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:43.7970961;00:38:16.2159455;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1904.7883595, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.982946753096374, Elapsed = 00:31:44.8013991, TimeTotal = 17:44:16.3660958, Remaining = 17:12:31.5646967, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:44.8013991, HeatingEstimate = 00:38:15.2116405, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.982946753096374;StartedAtUtc;00:31:44.8013991;17:44:16.3660958;17:12:31.5646967;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:44.8013991;00:38:15.2116405;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:44 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=53.5 that are outside of set tolerance 10 for current step target 64.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:21:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1905.7880442, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9845128164404806, Elapsed = 00:31:45.8014409, TimeTotal = 17:44:16.3664529, Remaining = 17:12:30.5650120, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:45.8014409, HeatingEstimate = 00:38:14.2119558, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9845128164404806;StartedAtUtc;00:31:45.8014409;17:44:16.3664529;17:12:30.5650120;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:45.8014409;00:38:14.2119558;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1906.7897375, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9860809393025134, Elapsed = 00:31:46.8027765, TimeTotal = 17:44:16.3660952, Remaining = 17:12:29.5633187, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:46.8027765, HeatingEstimate = 00:38:13.2102625, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9860809393025134;StartedAtUtc;00:31:46.8027765;17:44:16.3660952;17:12:29.5633187;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:46.8027765;00:38:13.2102625;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 64.041664 with temperature 52.5 [HeaterCheck.cs@111] +06/28/2026 14:21:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1907.7880997, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.987644651125426, Elapsed = 00:31:47.8013112, TimeTotal = 17:44:16.3662677, Remaining = 17:12:28.5649565, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:47.8013112, HeatingEstimate = 00:38:12.2119003, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.987644651125426;StartedAtUtc;00:31:47.8013112;17:44:16.3662677;17:12:28.5649565;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:47.8013112;00:38:12.2119003;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.041664 with temperature 60.25 [HeaterCheck.cs@67] +06/28/2026 14:21:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1908.7877679, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9892099719917034, Elapsed = 00:31:48.8008648, TimeTotal = 17:44:16.3661531, Remaining = 17:12:27.5652883, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:48.8008648, HeatingEstimate = 00:38:11.2122321, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9892099719917034;StartedAtUtc;00:31:48.8008648;17:44:16.3661531;17:12:27.5652883;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:48.8008648;00:38:11.2122321;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1909.7875234, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9907755556684945, Elapsed = 00:31:49.8005887, TimeTotal = 17:44:16.3661215, Remaining = 17:12:26.5655328, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:49.8005887, HeatingEstimate = 00:38:10.2124766, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9907755556684945;StartedAtUtc;00:31:49.8005887;17:44:16.3661215;17:12:26.5655328;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:49.8005887;00:38:10.2124766;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1910.7890045, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9923443359943063, Elapsed = 00:31:50.8023636, TimeTotal = 17:44:16.3664153, Remaining = 17:12:25.5640517, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:50.8023636, HeatingEstimate = 00:38:09.2109955, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9923443359943063;StartedAtUtc;00:31:50.8023636;17:44:16.3664153;17:12:25.5640517;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:50.8023636;00:38:09.2109955;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1911.7884224, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.993908941165452, Elapsed = 00:31:51.8014538, TimeTotal = 17:44:16.3660876, Remaining = 17:12:24.5646338, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:51.8014538, HeatingEstimate = 00:38:08.2115776, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.993908941165452;StartedAtUtc;00:31:51.8014538;17:44:16.3660876;17:12:24.5646338;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:51.8014538;00:38:08.2115776;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 64.041664 with temperature 59.75 [HeaterCheck.cs@67] +06/28/2026 14:21:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.11036682128906, Elapsed=00:00:30.2080615 [ControlledHeating.cs@486] +06/28/2026 14:21:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.11036682128906 after 00:00:30.2092455 [ControlledHeating.cs@493] +06/28/2026 14:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3675846. SinceCollect=00:01:17.7998970. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=7380, gen1=1528, gen2=67, LatencyMode=Interactive, FreeMemory=5669044224, Live=456348088, HeapSizeBytes=527158440, FragmentedBytes=71278496, TotalCommittedBytes=534740992, PinnedObjectsCount=27, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0603237. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0717333. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0823237. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:21:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 321324918017 (321324918017 @ 0) for mcu = 2663.132556 [28/06/2026 12:35:34] (2677.707650141667 sec) to 323781543350 (from now=323661543350, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 321324918017 (321324918017 @ 0) for mcu = 2663.132556 [28/06/2026 12:35:34] (2677.707650141667 sec) to 323781543350 (from external timestamp, flags=None, requested=323781543350 (323781543350 @ 0) for mcu = 2683.604816 [28/06/2026 12:35:54] (2698.1795279166668 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 321324918017 (321324918017 @ 0) for mcu = 2663.132556 [28/06/2026 12:35:34] (2677.707650141667 sec) to 323781543350 (from external timestamp, flags=None, requested=323781543350 (323781543350 @ 0) for mcu = 2683.604816 [28/06/2026 12:35:54] (2698.1795279166668 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1912.7877638, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.9954739770762013, Elapsed = 00:31:52.8008299, TimeTotal = 17:44:16.3661223, Remaining = 17:12:23.5652924, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:52.8008299, HeatingEstimate = 00:38:07.2122362, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9954739770762013;StartedAtUtc;00:31:52.8008299;17:44:16.3661223;17:12:23.5652924;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:52.8008299;00:38:07.2122362;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1913.7882523, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.997041846892522, Elapsed = 00:31:53.8020361, TimeTotal = 17:44:16.3668400, Remaining = 17:12:22.5648039, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:53.8020361, HeatingEstimate = 00:38:06.2117477, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.997041846892522;StartedAtUtc;00:31:53.8020361;17:44:16.3668400;17:12:22.5648039;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:53.8020361;00:38:06.2117477;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1914.7965151, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 2.998619733825593, Elapsed = 00:31:54.8095963, TimeTotal = 17:44:16.3661374, Remaining = 17:12:21.5565411, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:54.8095963, HeatingEstimate = 00:38:05.2034849, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.998619733825593;StartedAtUtc;00:31:54.8095963;17:44:16.3661374;17:12:21.5565411;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:54.8095963;00:38:05.2034849;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1915.7964273, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.000185720121642, Elapsed = 00:31:55.8095804, TimeTotal = 17:44:16.3662093, Remaining = 17:12:20.5566289, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:55.8095804, HeatingEstimate = 00:38:04.2035727, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.000185720121642;StartedAtUtc;00:31:55.8095804;17:44:16.3662093;17:12:20.5566289;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:55.8095804;00:38:04.2035727;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1916.7985106, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.001754849676274, Elapsed = 00:31:56.8115666, TimeTotal = 17:44:16.3661122, Remaining = 17:12:19.5545456, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:56.8115666, HeatingEstimate = 00:38:03.2014894, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.001754849676274;StartedAtUtc;00:31:56.8115666;17:44:16.3661122;17:12:19.5545456;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:56.8115666;00:38:03.2014894;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1917.7971206, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0033186534652154, Elapsed = 00:31:57.8101542, TimeTotal = 17:44:16.3660898, Remaining = 17:12:18.5559356, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:57.8101542, HeatingEstimate = 00:38:02.2028794, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0033186534652154;StartedAtUtc;00:31:57.8101542;17:44:16.3660898;17:12:18.5559356;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:57.8101542;00:38:02.2028794;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1918.8025981, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.004893285074104, Elapsed = 00:31:58.8156575, TimeTotal = 17:44:16.3661156, Remaining = 17:12:17.5504581, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:58.8156575, HeatingEstimate = 00:38:01.1974019, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.004893285074104;StartedAtUtc;00:31:58.8156575;17:44:16.3661156;17:12:17.5504581;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:58.8156575;00:38:01.1974019;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:21:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1919.8065606, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0064664093538047, Elapsed = 00:31:59.8202154, TimeTotal = 17:44:16.3667110, Remaining = 17:12:16.5464956, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:31:59.8202154, HeatingEstimate = 00:38:00.1934394, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:21:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0064664093538047;StartedAtUtc;00:31:59.8202154;17:44:16.3667110;17:12:16.5464956;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:31:59.8202154;00:38:00.1934394;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:22:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1920.8100151, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0080376596439318, Elapsed = 00:32:00.8235553, TimeTotal = 17:44:16.3665964, Remaining = 17:12:15.5430411, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:12:30.5946825, WeightTotalEstimate = 08:12:30.5946825, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:13.2244861, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:40.6285701, HeatingElapsed = 00:32:00.8235553, HeatingEstimate = 00:37:59.1899849, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:22.6024991, WeightEstimate = 08:12:30.5946825 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:34:15. coolingEstimate=04:17:40.6285701 [PrintingService.cs@1912] +06/28/2026 14:22:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0080376596439318;StartedAtUtc;00:32:00.8235553;17:44:16.3665964;17:12:15.5430411;False;661;0;0;00:00:00;08:12:30.5946825;08:12:30.5946825;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:13.2244861;00:00:00;04:17:40.6285701;00:32:00.8235553;00:37:59.1899849;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:22.6024991 [PrintingService.cs@1918] +06/28/2026 14:22:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=444472, estimate=85.70785157607087 for layer 47, Z=4.701003 [PrintingService.cs@1524] +06/28/2026 14:22:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 39, island count 3 [PrintingService.cs@1569] +06/28/2026 14:22:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 48, start=0, count=661, Z=4.801003 [PrintingService.cs@1518] +06/28/2026 14:22:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1620, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:22:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1921.8114992, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0075294119027784, Elapsed = 00:32:01.8245416, TimeTotal = 17:45:00.4404743, Remaining = 17:12:58.6159327, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:01.8245416, HeatingEstimate = 00:37:58.1885008, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0075294119027784;StartedAtUtc;00:32:01.8245416;17:45:00.4404743;17:12:58.6159327;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:01.8245416;00:37:58.1885008;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1922.8130355, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0090978465862728, Elapsed = 00:32:02.8268000, TimeTotal = 17:45:00.4411964, Remaining = 17:12:57.6143964, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:02.8268000, HeatingEstimate = 00:37:57.1869645, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0090978465862728;StartedAtUtc;00:32:02.8268000;17:45:00.4411964;17:12:57.6143964;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:02.8268000;00:37:57.1869645;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9885225. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1908942. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:22:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:22:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:22:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1923.814812, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0106645230773754, Elapsed = 00:32:03.8278926, TimeTotal = 17:45:00.4405125, Remaining = 17:12:56.6126199, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:03.8278926, HeatingEstimate = 00:37:56.1851880, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0106645230773754;StartedAtUtc;00:32:03.8278926;17:45:00.4405125;17:12:56.6126199;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:03.8278926;00:37:56.1851880;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1924.8197561, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.012242489839121, Elapsed = 00:32:04.8363254, TimeTotal = 17:45:00.4440012, Remaining = 17:12:55.6076758, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:04.8363254, HeatingEstimate = 00:37:55.1802439, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.012242489839121;StartedAtUtc;00:32:04.8363254;17:45:00.4440012;17:12:55.6076758;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:04.8363254;00:37:55.1802439;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1925.8264999, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.013813447859784, Elapsed = 00:32:05.8400846, TimeTotal = 17:45:00.4410166, Remaining = 17:12:54.6009320, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:05.8400846, HeatingEstimate = 00:37:54.1735001, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.013813447859784;StartedAtUtc;00:32:05.8400846;17:45:00.4410166;17:12:54.6009320;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:05.8400846;00:37:54.1735001;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1926.8290957, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.015381609023829, Elapsed = 00:32:06.8421299, TimeTotal = 17:45:00.4404661, Remaining = 17:12:53.5983362, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:06.8421299, HeatingEstimate = 00:37:53.1709043, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.015381609023829;StartedAtUtc;00:32:06.8421299;17:45:00.4404661;17:12:53.5983362;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:06.8421299;00:37:53.1709043;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=65.04166666666667,powderChamber1=65.04166666666667,powderChamber2=65.04166666666667,powderChamber3=65.04166666666667,powderChamber4=65.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:22:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1927.8321107, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0169517943092474, Elapsed = 00:32:07.8454958, TimeTotal = 17:45:00.4408170, Remaining = 17:12:52.5953212, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:07.8454958, HeatingEstimate = 00:37:52.1678893, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0169517943092474;StartedAtUtc;00:32:07.8454958;17:45:00.4408170;17:12:52.5953212;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:07.8454958;00:37:52.1678893;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 65.041664 with temperature 60.5 [HeaterCheck.cs@67] +06/28/2026 14:22:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1928.8339694, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.018519567518209, Elapsed = 00:32:08.8473084, TimeTotal = 17:45:00.4407709, Remaining = 17:12:51.5934625, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:08.8473084, HeatingEstimate = 00:37:51.1660306, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.018519567518209;StartedAtUtc;00:32:08.8473084;17:45:00.4407709;17:12:51.5934625;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:08.8473084;00:37:51.1660306;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 65.041664 with temperature 60.5 [HeaterCheck.cs@67] +06/28/2026 14:22:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1929.8343163, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0200857094148397, Elapsed = 00:32:09.8480932, TimeTotal = 17:45:00.4412088, Remaining = 17:12:50.5931156, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:09.8480932, HeatingEstimate = 00:37:50.1656837, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0200857094148397;StartedAtUtc;00:32:09.8480932;17:45:00.4412088;17:12:50.5931156;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:09.8480932;00:37:50.1656837;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1930.8374086, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0216543533462947, Elapsed = 00:32:10.8504411, TimeTotal = 17:45:00.4404644, Remaining = 17:12:49.5900233, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:10.8504411, HeatingEstimate = 00:37:49.1625914, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0216543533462947;StartedAtUtc;00:32:10.8504411;17:45:00.4404644;17:12:49.5900233;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:10.8504411;00:37:49.1625914;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1931.8374713, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0232198779208534, Elapsed = 00:32:11.8508280, TimeTotal = 17:45:00.4407886, Remaining = 17:12:48.5899606, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:11.8508280, HeatingEstimate = 00:37:48.1625287, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0232198779208534;StartedAtUtc;00:32:11.8508280;17:45:00.4407886;17:12:48.5899606;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:11.8508280;00:37:48.1625287;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1932.8365543, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0247828904622027, Elapsed = 00:32:12.8495902, TimeTotal = 17:45:00.4404678, Remaining = 17:12:47.5908776, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:12.8495902, HeatingEstimate = 00:37:47.1634457, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0247828904622027;StartedAtUtc;00:32:12.8495902;17:45:00.4404678;17:12:47.5908776;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:12.8495902;00:37:47.1634457;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 65.041664 with temperature 60.25 [HeaterCheck.cs@67] +06/28/2026 14:22:12 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=54.5 that are outside of set tolerance 10 for current step target 65.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:22:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1933.8365261, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.026347778039117, Elapsed = 00:32:13.8495602, TimeTotal = 17:45:00.4404660, Remaining = 17:12:46.5909058, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:13.8495602, HeatingEstimate = 00:37:46.1634739, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.026347778039117;StartedAtUtc;00:32:13.8495602;17:45:00.4404660;17:12:46.5909058;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:13.8495602;00:37:46.1634739;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 65.041664 with temperature 60.25 [HeaterCheck.cs@67] +06/28/2026 14:22:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1934.8394131, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.027917853853927, Elapsed = 00:32:14.8528580, TimeTotal = 17:45:00.4408768, Remaining = 17:12:45.5880188, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:14.8528580, HeatingEstimate = 00:37:45.1605869, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.027917853853927;StartedAtUtc;00:32:14.8528580;17:45:00.4408768;17:12:45.5880188;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:14.8528580;00:37:45.1605869;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 65.041664 with temperature 60.75 [HeaterCheck.cs@67] +06/28/2026 14:22:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1935.8514077, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0295009497599423, Elapsed = 00:32:15.8644511, TimeTotal = 17:45:00.4404753, Remaining = 17:12:44.5760242, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:15.8644511, HeatingEstimate = 00:37:44.1485923, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0295009497599423;StartedAtUtc;00:32:15.8644511;17:45:00.4404753;17:12:44.5760242;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:15.8644511;00:37:44.1485923;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=66.04166666666667,powderChamber1=66.04166666666667,powderChamber2=66.04166666666667,powderChamber3=66.04166666666667,powderChamber4=66.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:22:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 66.041664 with temperature 60.5 [HeaterCheck.cs@88] +06/28/2026 14:22:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1936.8514914, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0310660135152196, Elapsed = 00:32:16.8645337, TimeTotal = 17:45:00.4404742, Remaining = 17:12:43.5759405, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:16.8645337, HeatingEstimate = 00:37:43.1485086, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0310660135152196;StartedAtUtc;00:32:16.8645337;17:45:00.4404742;17:12:43.5759405;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:16.8645337;00:37:43.1485086;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1937.8540757, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0326372007489035, Elapsed = 00:32:17.8685734, TimeTotal = 17:45:00.4419296, Remaining = 17:12:42.5733562, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:17.8685734, HeatingEstimate = 00:37:42.1459243, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0326372007489035;StartedAtUtc;00:32:17.8685734;17:45:00.4419296;17:12:42.5733562;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:17.8685734;00:37:42.1459243;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1938.8666868, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0342201822295047, Elapsed = 00:32:18.8800718, TimeTotal = 17:45:00.4408169, Remaining = 17:12:41.5607451, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:18.8800718, HeatingEstimate = 00:37:41.1333132, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0342201822295047;StartedAtUtc;00:32:18.8800718;17:45:00.4408169;17:12:41.5607451;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:18.8800718;00:37:41.1333132;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1939.8728306, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0357942027852522, Elapsed = 00:32:19.8858673, TimeTotal = 17:45:00.4404686, Remaining = 17:12:40.5546013, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:19.8858673, HeatingEstimate = 00:37:40.1271694, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0357942027852522;StartedAtUtc;00:32:19.8858673;17:45:00.4404686;17:12:40.5546013;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:19.8858673;00:37:40.1271694;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1940.8799217, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.037370714133916, Elapsed = 00:32:20.8932746, TimeTotal = 17:45:00.4407848, Remaining = 17:12:39.5475102, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:20.8932746, HeatingEstimate = 00:37:39.1200783, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.037370714133916;StartedAtUtc;00:32:20.8932746;17:45:00.4407848;17:12:39.5475102;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:20.8932746;00:37:39.1200783;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1941.8923421, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.038954610435061, Elapsed = 00:32:21.9053818, TimeTotal = 17:45:00.4404716, Remaining = 17:12:38.5350898, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:21.9053818, HeatingEstimate = 00:37:38.1076579, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.038954610435061;StartedAtUtc;00:32:21.9053818;17:45:00.4404716;17:12:38.5350898;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:21.9053818;00:37:38.1076579;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:21 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=55.25 that are outside of set tolerance 10 for current step target 66.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.45181274414062, Elapsed=00:00:30.5696355 [ControlledHeating.cs@486] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.45181274414062 after 00:00:30.5696973 [ControlledHeating.cs@493] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2066572. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0626832. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2715226. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2841284. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:22:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 324993064578 (324993064578 @ 0) for mcu = 2693.701040 [28/06/2026 12:36:04] (2708.27553815 sec) to 327405666727 (from now=327285666727, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 324993064578 (324993064578 @ 0) for mcu = 2693.701040 [28/06/2026 12:36:04] (2708.27553815 sec) to 327405666727 (from external timestamp, flags=None, requested=327405666727 (327405666727 @ 0) for mcu = 2713.806441 [28/06/2026 12:36:24] (2728.3805560583332 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 324993064578 (324993064578 @ 0) for mcu = 2693.701040 [28/06/2026 12:36:04] (2708.27553815 sec) to 327405666727 (from external timestamp, flags=None, requested=327405666727 (327405666727 @ 0) for mcu = 2713.806441 [28/06/2026 12:36:24] (2728.3805560583332 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1942.8969254, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0405267083345713, Elapsed = 00:32:22.9099591, TimeTotal = 17:45:00.4404656, Remaining = 17:12:37.5305065, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:22.9099591, HeatingEstimate = 00:37:37.1030746, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0405267083345713;StartedAtUtc;00:32:22.9099591;17:45:00.4404656;17:12:37.5305065;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:22.9099591;00:37:37.1030746;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1943.8975535, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0420926387586635, Elapsed = 00:32:23.9105958, TimeTotal = 17:45:00.4404742, Remaining = 17:12:36.5298784, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:23.9105958, HeatingEstimate = 00:37:36.1024465, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0420926387586635;StartedAtUtc;00:32:23.9105958;17:45:00.4404742;17:12:36.5298784;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:23.9105958;00:37:36.1024465;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:24 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] +06/28/2026 14:22:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1944.8966927, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0436562095640354, Elapsed = 00:32:24.9097241, TimeTotal = 17:45:00.4404633, Remaining = 17:12:35.5307392, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:24.9097241, HeatingEstimate = 00:37:35.1033073, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0436562095640354;StartedAtUtc;00:32:24.9097241;17:45:00.4404633;17:12:35.5307392;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:24.9097241;00:37:35.1033073;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:24 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] +06/28/2026 14:22:24 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] +06/28/2026 14:22:24 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] +06/28/2026 14:22:25 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] +06/28/2026 14:22:25 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] +06/28/2026 14:22:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 64.25 [HeaterCheck.cs@67] +06/28/2026 14:22:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1945.8979106, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.04522305843426, Elapsed = 00:32:25.9109476, TimeTotal = 17:45:00.4404689, Remaining = 17:12:34.5295213, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:25.9109476, HeatingEstimate = 00:37:34.1020894, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.04522305843426;StartedAtUtc;00:32:25.9109476;17:45:00.4404689;17:12:34.5295213;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:25.9109476;00:37:34.1020894;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1946.8962214, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.046785344986639, Elapsed = 00:32:26.9092555, TimeTotal = 17:45:00.4404660, Remaining = 17:12:33.5312105, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:26.9092555, HeatingEstimate = 00:37:33.1037786, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.046785344986639;StartedAtUtc;00:32:26.9092555;17:45:00.4404660;17:12:33.5312105;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:26.9092555;00:37:33.1037786;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1349550 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:22:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1947.9029594, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0483674428682774, Elapsed = 00:32:27.9203560, TimeTotal = 17:45:00.4448285, Remaining = 17:12:32.5244725, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:27.9203560, HeatingEstimate = 00:37:32.0970406, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0483674428682774;StartedAtUtc;00:32:27.9203560;17:45:00.4448285;17:12:32.5244725;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:27.9203560;00:37:32.0970406;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1948.9112738, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.049939291955489, Elapsed = 00:32:28.9246520, TimeTotal = 17:45:00.4408101, Remaining = 17:12:31.5161581, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:28.9246520, HeatingEstimate = 00:37:31.0887262, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.049939291955489;StartedAtUtc;00:32:28.9246520;17:45:00.4408101;17:12:31.5161581;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:28.9246520;00:37:31.0887262;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1949.9178744, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0515141213725925, Elapsed = 00:32:29.9309662, TimeTotal = 17:45:00.4405237, Remaining = 17:12:30.5095575, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:29.9309662, HeatingEstimate = 00:37:30.0821256, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0515141213725925;StartedAtUtc;00:32:29.9309662;17:45:00.4405237;17:12:30.5095575;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:29.9309662;00:37:30.0821256;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 62 [HeaterCheck.cs@67] +06/28/2026 14:22:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1950.9241155, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.053089158924925, Elapsed = 00:32:30.9374289, TimeTotal = 17:45:00.4407453, Remaining = 17:12:29.5033164, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:30.9374289, HeatingEstimate = 00:37:29.0758845, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.053089158924925;StartedAtUtc;00:32:30.9374289;17:45:00.4407453;17:12:29.5033164;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:30.9374289;00:37:29.0758845;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1951.9243318, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.054654434432269, Elapsed = 00:32:31.9376469, TimeTotal = 17:45:00.4407470, Remaining = 17:12:28.5031001, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:31.9376469, HeatingEstimate = 00:37:28.0756682, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.054654434432269;StartedAtUtc;00:32:31.9376469;17:45:00.4407470;17:12:28.5031001;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:31.9376469;00:37:28.0756682;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1952.926206, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0562274401531724, Elapsed = 00:32:32.9429080, TimeTotal = 17:45:00.4441339, Remaining = 17:12:27.5012259, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:32.9429080, HeatingEstimate = 00:37:27.0737940, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0562274401531724;StartedAtUtc;00:32:32.9429080;17:45:00.4441339;17:12:27.5012259;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:32.9429080;00:37:27.0737940;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.5 [HeaterCheck.cs@67] +06/28/2026 14:22:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9840346. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3911710. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:22:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:22:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:22:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1953.9295606, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.05779223874279, Elapsed = 00:32:33.9427127, TimeTotal = 17:45:00.4405840, Remaining = 17:12:26.4978713, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:33.9427127, HeatingEstimate = 00:37:26.0704394, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.05779223874279;StartedAtUtc;00:32:33.9427127;17:45:00.4405840;17:12:26.4978713;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:33.9427127;00:37:26.0704394;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1954.9300715, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0593578443615836, Elapsed = 00:32:34.9431390, TimeTotal = 17:45:00.4404994, Remaining = 17:12:25.4973604, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:34.9431390, HeatingEstimate = 00:37:25.0699285, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0593578443615836;StartedAtUtc;00:32:34.9431390;17:45:00.4404994;17:12:25.4973604;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:34.9431390;00:37:25.0699285;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1955.9292107, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0609214141073604, Elapsed = 00:32:35.9422666, TimeTotal = 17:45:00.4404878, Remaining = 17:12:24.4982212, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:35.9422666, HeatingEstimate = 00:37:24.0707893, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0609214141073604;StartedAtUtc;00:32:35.9422666;17:45:00.4404878;17:12:24.4982212;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:35.9422666;00:37:24.0707893;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1956.9332005, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.062492563347134, Elapsed = 00:32:36.9462373, TimeTotal = 17:45:00.4404687, Remaining = 17:12:23.4942314, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:36.9462373, HeatingEstimate = 00:37:23.0667995, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.062492563347134;StartedAtUtc;00:32:36.9462373;17:45:00.4404687;17:12:23.4942314;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:36.9462373;00:37:23.0667995;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1957.9351126, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.064060617221204, Elapsed = 00:32:37.9482332, TimeTotal = 17:45:00.4405525, Remaining = 17:12:22.4923193, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:37.9482332, HeatingEstimate = 00:37:22.0648874, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.064060617221204;StartedAtUtc;00:32:37.9482332;17:45:00.4405525;17:12:22.4923193;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:37.9482332;00:37:22.0648874;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1958.9366939, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0656283331705345, Elapsed = 00:32:38.9500168, TimeTotal = 17:45:00.4407548, Remaining = 17:12:21.4907380, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:38.9500168, HeatingEstimate = 00:37:21.0633061, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0656283331705345;StartedAtUtc;00:32:38.9500168;17:45:00.4407548;17:12:21.4907380;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:38.9500168;00:37:21.0633061;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.5 [HeaterCheck.cs@67] +06/28/2026 14:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1959.9358545, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0671915165132178, Elapsed = 00:32:39.9488890, TimeTotal = 17:45:00.4404664, Remaining = 17:12:20.4915774, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:39.9488890, HeatingEstimate = 00:37:20.0641455, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0671915165132178;StartedAtUtc;00:32:39.9488890;17:45:00.4404664;17:12:20.4915774;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:39.9488890;00:37:20.0641455;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.5 [HeaterCheck.cs@67] +06/28/2026 14:22:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1960.9377311, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0687595155844645, Elapsed = 00:32:40.9508499, TimeTotal = 17:45:00.4405507, Remaining = 17:12:19.4897008, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:40.9508499, HeatingEstimate = 00:37:19.0622689, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0687595155844645;StartedAtUtc;00:32:40.9508499;17:45:00.4405507;17:12:19.4897008;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:40.9508499;00:37:19.0622689;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:40 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (195 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:22:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.5 [HeaterCheck.cs@67] +06/28/2026 14:22:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1961.9359857, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.070322291513373, Elapsed = 00:32:41.9494822, TimeTotal = 17:45:00.4409284, Remaining = 17:12:18.4914462, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:41.9494822, HeatingEstimate = 00:37:18.0640143, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.070322291513373;StartedAtUtc;00:32:41.9494822;17:45:00.4409284;17:12:18.4914462;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:41.9494822;00:37:18.0640143;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1962.9361191, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0718867340657563, Elapsed = 00:32:42.9491537, TimeTotal = 17:45:00.4404665, Remaining = 17:12:17.4913128, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:42.9491537, HeatingEstimate = 00:37:17.0638809, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0718867340657563;StartedAtUtc;00:32:42.9491537;17:45:00.4404665;17:12:17.4913128;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:42.9491537;00:37:17.0638809;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 66.041664 with temperature 61.25 [HeaterCheck.cs@67] +06/28/2026 14:22:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=67.04166666666667,powderChamber1=67.04166666666667,powderChamber2=67.04166666666667,powderChamber3=67.04166666666667,powderChamber4=67.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:22:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 67.041664 with temperature 61.25 [HeaterCheck.cs@88] +06/28/2026 14:22:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1963.9421444, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0734611115081822, Elapsed = 00:32:43.9551881, TimeTotal = 17:45:00.4404756, Remaining = 17:12:16.4852875, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:43.9551881, HeatingEstimate = 00:37:16.0578556, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0734611115081822;StartedAtUtc;00:32:43.9551881;17:45:00.4404756;17:12:16.4852875;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:43.9551881;00:37:16.0578556;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1964.9403358, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0750232470052783, Elapsed = 00:32:44.9534002, TimeTotal = 17:45:00.4404963, Remaining = 17:12:15.4870961, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:44.9534002, HeatingEstimate = 00:37:15.0596642, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0750232470052783;StartedAtUtc;00:32:44.9534002;17:45:00.4404963;17:12:15.4870961;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:44.9534002;00:37:15.0596642;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=332018, estimate=82.21514003598425 for layer 48, Z=4.801003 [PrintingService.cs@1524] +06/28/2026 14:22:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1965.9419869, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0765907187421457, Elapsed = 00:32:45.9550206, TimeTotal = 17:45:00.4404656, Remaining = 17:12:14.4854450, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:03.2423682, WeightTotalEstimate = 08:13:03.2423682, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:16:45.8721718, CoolingElapsed = 00:00:00, CoolingEstimate = 04:17:52.0552601, HeatingElapsed = 00:32:45.9550206, HeatingEstimate = 00:37:14.0580131, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:32:55.2501848, WeightEstimate = 08:13:03.2423682 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:00. coolingEstimate=04:17:52.0552601 [PrintingService.cs@1912] +06/28/2026 14:22:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0765907187421457;StartedAtUtc;00:32:45.9550206;17:45:00.4404656;17:12:14.4854450;False;661;0;0;00:00:00;08:13:03.2423682;08:13:03.2423682;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:16:45.8721718;00:00:00;04:17:52.0552601;00:32:45.9550206;00:37:14.0580131;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:32:55.2501848 [PrintingService.cs@1918] +06/28/2026 14:22:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 40, island count 3 [PrintingService.cs@1569] +06/28/2026 14:22:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 49, start=0, count=661, Z=4.901003 [PrintingService.cs@1518] +06/28/2026 14:22:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1563, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:22:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1966.9402014, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.076021628074372, Elapsed = 00:32:46.9532678, TimeTotal = 17:45:44.7151427, Remaining = 17:12:57.7618749, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:46.9532678, HeatingEstimate = 00:37:13.0597986, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.076021628074372;StartedAtUtc;00:32:46.9532678;17:45:44.7151427;17:12:57.7618749;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:46.9532678;00:37:13.0597986;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1967.9414904, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0775876164855527, Elapsed = 00:32:47.9546371, TimeTotal = 17:45:44.7152230, Remaining = 17:12:56.7605859, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:47.9546371, HeatingEstimate = 00:37:12.0585096, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0775876164855527;StartedAtUtc;00:32:47.9546371;17:45:44.7152230;17:12:56.7605859;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:47.9546371;00:37:12.0585096;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 67.041664 with temperature 63 [HeaterCheck.cs@67] +06/28/2026 14:22:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1968.942308, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0791525777405515, Elapsed = 00:32:48.9553437, TimeTotal = 17:45:44.7151120, Remaining = 17:12:55.7597683, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:48.9553437, HeatingEstimate = 00:37:11.0576920, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0791525777405515;StartedAtUtc;00:32:48.9553437;17:45:44.7151120;17:12:55.7597683;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:48.9553437;00:37:11.0576920;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=56.25 that are outside of set tolerance 10 for current step target 67.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:22:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1969.9442725, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0807194983962094, Elapsed = 00:32:49.9573066, TimeTotal = 17:45:44.7151104, Remaining = 17:12:54.7578038, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:49.9573066, HeatingEstimate = 00:37:10.0557275, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0807194983962094;StartedAtUtc;00:32:49.9573066;17:45:44.7151104;17:12:54.7578038;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:49.9573066;00:37:10.0557275;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1970.9445699, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0822838161999337, Elapsed = 00:32:50.9576052, TimeTotal = 17:45:44.7151116, Remaining = 17:12:53.7575064, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:50.9576052, HeatingEstimate = 00:37:09.0554301, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0822838161999337;StartedAtUtc;00:32:50.9576052;17:45:44.7151116;17:12:53.7575064;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:50.9576052;00:37:09.0554301;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1971.9444355, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.083847455701534, Elapsed = 00:32:51.9574700, TimeTotal = 17:45:44.7151108, Remaining = 17:12:52.7576408, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:51.9574700, HeatingEstimate = 00:37:08.0555645, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.083847455701534;StartedAtUtc;00:32:51.9574700;17:45:44.7151108;17:12:52.7576408;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:51.9574700;00:37:08.0555645;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.255859375, Elapsed=00:00:30.2214949 [ControlledHeating.cs@486] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.255859375 after 00:00:30.2215500 [ControlledHeating.cs@493] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1973.1123281, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.085675561996179, Elapsed = 00:32:53.1264819, TimeTotal = 17:45:44.7162301, Remaining = 17:12:51.5897482, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:53.1264819, HeatingEstimate = 00:37:06.8876719, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.085675561996179;StartedAtUtc;00:32:53.1264819;17:45:44.7162301;17:12:51.5897482;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:53.1264819;00:37:06.8876719;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2977840. SinceCollect=00:01:00.7254514. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=7516, gen1=1597, gen2=68, LatencyMode=Interactive, FreeMemory=5665193984, Live=491890800, HeapSizeBytes=539400536, FragmentedBytes=48120520, TotalCommittedBytes=550420480, PinnedObjectsCount=24, MemoryLoadBytes=2873205719, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0608688. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0671906. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0831067. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:22:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 328617187955 (328617187955 @ 0) for mcu = 2723.902702 [28/06/2026 12:36:34] (2738.4765662916666 sec) to 331068538783 (from now=330948538783, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 328617187955 (328617187955 @ 0) for mcu = 2723.902702 [28/06/2026 12:36:34] (2738.4765662916666 sec) to 331068538783 (from external timestamp, flags=None, requested=331068538783 (331068538783 @ 0) for mcu = 2744.331032 [28/06/2026 12:36:55] (2758.9044898583334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 328617187955 (328617187955 @ 0) for mcu = 2723.902702 [28/06/2026 12:36:34] (2738.4765662916666 sec) to 331068538783 (from external timestamp, flags=None, requested=331068538783 (331068538783 @ 0) for mcu = 2744.331032 [28/06/2026 12:36:55] (2758.9044898583334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:22:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1974.1120064, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.087237236734743, Elapsed = 00:32:54.1250563, TimeTotal = 17:45:44.7151262, Remaining = 17:12:50.5900699, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:54.1250563, HeatingEstimate = 00:37:05.8879936, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.087237236734743;StartedAtUtc;00:32:54.1250563;17:45:44.7151262;17:12:50.5900699;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:54.1250563;00:37:05.8879936;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1975.115953, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.088808479387396, Elapsed = 00:32:55.1298078, TimeTotal = 17:45:44.7159311, Remaining = 17:12:49.5861233, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:55.1298078, HeatingEstimate = 00:37:04.8840470, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.088808479387396;StartedAtUtc;00:32:55.1298078;17:45:44.7159311;17:12:49.5861233;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:55.1298078;00:37:04.8840470;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1976.1156684, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0903707609767723, Elapsed = 00:32:56.1287814, TimeTotal = 17:45:44.7151893, Remaining = 17:12:48.5864079, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:56.1287814, HeatingEstimate = 00:37:03.8843316, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0903707609767723;StartedAtUtc;00:32:56.1287814;17:45:44.7151893;17:12:48.5864079;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:56.1287814;00:37:03.8843316;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1977.1186743, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0919403275786475, Elapsed = 00:32:57.1324570, TimeTotal = 17:45:44.7158590, Remaining = 17:12:47.5834020, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:57.1324570, HeatingEstimate = 00:37:02.8813257, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0919403275786475;StartedAtUtc;00:32:57.1324570;17:45:44.7158590;17:12:47.5834020;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:57.1324570;00:37:02.8813257;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1978.1258437, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0935144272454655, Elapsed = 00:32:58.1389909, TimeTotal = 17:45:44.7152235, Remaining = 17:12:46.5762326, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:58.1389909, HeatingEstimate = 00:37:01.8741563, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0935144272454655;StartedAtUtc;00:32:58.1389909;17:45:44.7152235;17:12:46.5762326;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:58.1389909;00:37:01.8741563;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1979.1254966, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0950789798120293, Elapsed = 00:32:59.1394650, TimeTotal = 17:45:44.7160447, Remaining = 17:12:45.5765797, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:32:59.1394650, HeatingEstimate = 00:37:00.8745034, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0950789798120293;StartedAtUtc;00:32:59.1394650;17:45:44.7160447;17:12:45.5765797;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:32:59.1394650;00:37:00.8745034;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:22:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1980.1254717, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0966413898262224, Elapsed = 00:33:00.1385150, TimeTotal = 17:45:44.7151196, Remaining = 17:12:44.5766046, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:00.1385150, HeatingEstimate = 00:36:59.8745283, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:22:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0966413898262224;StartedAtUtc;00:33:00.1385150;17:45:44.7151196;17:12:44.5766046;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:00.1385150;00:36:59.8745283;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1981.1238655, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0982027406844956, Elapsed = 00:33:01.1369166, TimeTotal = 17:45:44.7151274, Remaining = 17:12:43.5782108, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:01.1369166, HeatingEstimate = 00:36:58.8761345, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0982027406844956;StartedAtUtc;00:33:01.1369166;17:45:44.7151274;17:12:43.5782108;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:01.1369166;00:36:58.8761345;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1982.1267848, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.0997711764780265, Elapsed = 00:33:02.1398488, TimeTotal = 17:45:44.7151403, Remaining = 17:12:42.5752915, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:02.1398488, HeatingEstimate = 00:36:57.8732152, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.0997711764780265;StartedAtUtc;00:33:02.1398488;17:45:44.7151403;17:12:42.5752915;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:02.1398488;00:36:57.8732152;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 67.041664 with temperature 62.25 [HeaterCheck.cs@67] +06/28/2026 14:23:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1983.1282976, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1013385687756014, Elapsed = 00:33:03.1421374, TimeTotal = 17:45:44.7159161, Remaining = 17:12:41.5737787, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:03.1421374, HeatingEstimate = 00:36:56.8717024, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1013385687756014;StartedAtUtc;00:33:03.1421374;17:45:44.7159161;17:12:41.5737787;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:03.1421374;00:36:56.8717024;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1984.1308403, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1029052045543235, Elapsed = 00:33:04.1438938, TimeTotal = 17:45:44.7151298, Remaining = 17:12:40.5712360, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:04.1438938, HeatingEstimate = 00:36:55.8691597, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1029052045543235;StartedAtUtc;00:33:04.1438938;17:45:44.7151298;17:12:40.5712360;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:04.1438938;00:36:55.8691597;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9941290. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1894766. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:23:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:23:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:23:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1985.1356681, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1044765805579453, Elapsed = 00:33:05.1487052, TimeTotal = 17:45:44.7151134, Remaining = 17:12:39.5664082, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:05.1487052, HeatingEstimate = 00:36:54.8643319, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1044765805579453;StartedAtUtc;00:33:05.1487052;17:45:44.7151134;17:12:39.5664082;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:05.1487052;00:36:54.8643319;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1986.1416576, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1060499028441346, Elapsed = 00:33:06.1547638, TimeTotal = 17:45:44.7151825, Remaining = 17:12:38.5604187, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:06.1547638, HeatingEstimate = 00:36:53.8583424, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1060499028441346;StartedAtUtc;00:33:06.1547638;17:45:44.7151825;17:12:38.5604187;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:06.1547638;00:36:53.8583424;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1987.1441518, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.107618004318261, Elapsed = 00:33:07.1574890, TimeTotal = 17:45:44.7154135, Remaining = 17:12:37.5579245, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:07.1574890, HeatingEstimate = 00:36:52.8558482, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.107618004318261;StartedAtUtc;00:33:07.1574890;17:45:44.7154135;17:12:37.5579245;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:07.1574890;00:36:52.8558482;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1988.1455242, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.10918368490439, Elapsed = 00:33:08.1586525, TimeTotal = 17:45:44.7152046, Remaining = 17:12:36.5565521, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:08.1586525, HeatingEstimate = 00:36:51.8544758, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.10918368490439;StartedAtUtc;00:33:08.1586525;17:45:44.7152046;17:12:36.5565521;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:08.1586525;00:36:51.8544758;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1989.1452186, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1107469181831844, Elapsed = 00:33:09.1582547, TimeTotal = 17:45:44.7151124, Remaining = 17:12:35.5568577, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:09.1582547, HeatingEstimate = 00:36:50.8547814, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1107469181831844;StartedAtUtc;00:33:09.1582547;17:45:44.7151124;17:12:35.5568577;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:09.1582547;00:36:50.8547814;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1990.1454598, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.112311449315458, Elapsed = 00:33:10.1586959, TimeTotal = 17:45:44.7153124, Remaining = 17:12:34.5566165, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:10.1586959, HeatingEstimate = 00:36:49.8545402, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.112311449315458;StartedAtUtc;00:33:10.1586959;17:45:44.7153124;17:12:34.5566165;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:10.1586959;00:36:49.8545402;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1991.1507697, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1138856609200984, Elapsed = 00:33:11.1653633, TimeTotal = 17:45:44.7166699, Remaining = 17:12:33.5513066, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:11.1653633, HeatingEstimate = 00:36:48.8492303, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1138856609200984;StartedAtUtc;00:33:11.1653633;17:45:44.7166699;17:12:33.5513066;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:11.1653633;00:36:48.8492303;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1992.1526367, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1154501095506824, Elapsed = 00:33:12.1656978, TimeTotal = 17:45:44.7151374, Remaining = 17:12:32.5494396, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:12.1656978, HeatingEstimate = 00:36:47.8473633, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1154501095506824;StartedAtUtc;00:33:12.1656978;17:45:44.7151374;17:12:32.5494396;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:12.1656978;00:36:47.8473633;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1993.1517039, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1170124944130904, Elapsed = 00:33:13.1647602, TimeTotal = 17:45:44.7151326, Remaining = 17:12:31.5503724, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:13.1647602, HeatingEstimate = 00:36:46.8482961, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1170124944130904;StartedAtUtc;00:33:13.1647602;17:45:44.7151326;17:12:31.5503724;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:13.1647602;00:36:46.8482961;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1994.1546963, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1185810304299464, Elapsed = 00:33:14.1677562, TimeTotal = 17:45:44.7151362, Remaining = 17:12:30.5473800, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:14.1677562, HeatingEstimate = 00:36:45.8453037, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1185810304299464;StartedAtUtc;00:33:14.1677562;17:45:44.7151362;17:12:30.5473800;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:14.1677562;00:36:45.8453037;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 67.041664 with temperature 62.25 [HeaterCheck.cs@67] +06/28/2026 14:23:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 67.041664 with temperature 62.75 [HeaterCheck.cs@67] +06/28/2026 14:23:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1995.1582995, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1201504777101174, Elapsed = 00:33:15.1713340, TimeTotal = 17:45:44.7151108, Remaining = 17:12:29.5437768, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:15.1713340, HeatingEstimate = 00:36:44.8417005, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1201504777101174;StartedAtUtc;00:33:15.1713340;17:45:44.7151108;17:12:29.5437768;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:15.1713340;00:36:44.8417005;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1996.1620549, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1217202083090942, Elapsed = 00:33:16.1750939, TimeTotal = 17:45:44.7151153, Remaining = 17:12:28.5400214, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:16.1750939, HeatingEstimate = 00:36:43.8379451, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1217202083090942;StartedAtUtc;00:33:16.1750939;17:45:44.7151153;17:12:28.5400214;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:16.1750939;00:36:43.8379451;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 67.041664 with temperature 56.5 [HeaterCheck.cs@111] +06/28/2026 14:23:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1997.1630043, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1232860888728506, Elapsed = 00:33:17.1764030, TimeTotal = 17:45:44.7154750, Remaining = 17:12:27.5390720, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:17.1764030, HeatingEstimate = 00:36:42.8369957, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1232860888728506;StartedAtUtc;00:33:17.1764030;17:45:44.7154750;17:12:27.5390720;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:17.1764030;00:36:42.8369957;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=68.04166666666667,powderChamber1=68.04166666666667,powderChamber2=68.04166666666667,powderChamber3=68.04166666666667,powderChamber4=68.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:23:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1998.1647686, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1248521824040862, Elapsed = 00:33:18.1778264, TimeTotal = 17:45:44.7151341, Remaining = 17:12:26.5373077, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:18.1778264, HeatingEstimate = 00:36:41.8352314, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1248521824040862;StartedAtUtc;00:33:18.1778264;17:45:44.7151341;17:12:26.5373077;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:18.1778264;00:36:41.8352314;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1999.167615, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.126420904590834, Elapsed = 00:33:19.1809500, TimeTotal = 17:45:44.7154113, Remaining = 17:12:25.5344613, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:19.1809500, HeatingEstimate = 00:36:40.8323850, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.126420904590834;StartedAtUtc;00:33:19.1809500;17:45:44.7154113;17:12:25.5344613;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:19.1809500;00:36:40.8323850;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2000.1685163, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1279857097403467, Elapsed = 00:33:20.1815508, TimeTotal = 17:45:44.7151108, Remaining = 17:12:24.5335600, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:20.1815508, HeatingEstimate = 00:36:39.8314837, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1279857097403467;StartedAtUtc;00:33:20.1815508;17:45:44.7151108;17:12:24.5335600;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:20.1815508;00:36:39.8314837;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2001.1677183, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1295489421278737, Elapsed = 00:33:21.1811683, TimeTotal = 17:45:44.7155263, Remaining = 17:12:23.5343580, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:21.1811683, HeatingEstimate = 00:36:38.8322817, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1295489421278737;StartedAtUtc;00:33:21.1811683;17:45:44.7155263;17:12:23.5343580;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:21.1811683;00:36:38.8322817;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2002.1674647, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1311117665316384, Elapsed = 00:33:22.1804989, TimeTotal = 17:45:44.7151105, Remaining = 17:12:22.5346116, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:22.1804989, HeatingEstimate = 00:36:37.8325353, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1311117665316384;StartedAtUtc;00:33:22.1804989;17:45:44.7151105;17:12:22.5346116;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:22.1804989;00:36:37.8325353;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2003.1703037, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.132680330935301, Elapsed = 00:33:23.1835186, TimeTotal = 17:45:44.7152912, Remaining = 17:12:21.5317726, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:23.1835186, HeatingEstimate = 00:36:36.8296963, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.132680330935301;StartedAtUtc;00:33:23.1835186;17:45:44.7152912;17:12:21.5317726;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:23.1835186;00:36:36.8296963;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.30824279785156, Elapsed=00:00:30.5069601 [ControlledHeating.cs@486] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.30824279785156 after 00:00:30.5070120 [ControlledHeating.cs@493] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2063091. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631288. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2697606. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2848884. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:23:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 332280060011 (332280060011 @ 0) for mcu = 2754.427164 [28/06/2026 12:37:05] (2769.0005000916667 sec) to 334692693114 (from now=334572693114, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 332280060011 (332280060011 @ 0) for mcu = 2754.427164 [28/06/2026 12:37:05] (2769.0005000916667 sec) to 334692693114 (from external timestamp, flags=None, requested=334692693114 (334692693114 @ 0) for mcu = 2774.532806 [28/06/2026 12:37:25] (2789.10577595 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 332280060011 (332280060011 @ 0) for mcu = 2754.427164 [28/06/2026 12:37:05] (2769.0005000916667 sec) to 334692693114 (from external timestamp, flags=None, requested=334692693114 (334692693114 @ 0) for mcu = 2774.532806 [28/06/2026 12:37:25] (2789.10577595 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=57.25 that are outside of set tolerance 10 for current step target 68.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2004.172614, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1342485294867024, Elapsed = 00:33:24.1863139, TimeTotal = 17:45:44.7157762, Remaining = 17:12:20.5294623, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:24.1863139, HeatingEstimate = 00:36:35.8273860, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1342485294867024;StartedAtUtc;00:33:24.1863139;17:45:44.7157762;17:12:20.5294623;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:24.1863139;00:36:35.8273860;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2005.175409, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.135815759733776, Elapsed = 00:33:25.1884543, TimeTotal = 17:45:44.7151216, Remaining = 17:12:19.5266673, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:25.1884543, HeatingEstimate = 00:36:34.8245910, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.135815759733776;StartedAtUtc;00:33:25.1884543;17:45:44.7151216;17:12:19.5266673;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:25.1884543;00:36:34.8245910;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2006.1797653, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1373864056613203, Elapsed = 00:33:26.1927990, TimeTotal = 17:45:44.7151100, Remaining = 17:12:18.5223110, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:26.1927990, HeatingEstimate = 00:36:33.8202347, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1373864056613203;StartedAtUtc;00:33:26.1927990;17:45:44.7151100;17:12:18.5223110;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:26.1927990;00:36:33.8202347;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2007.1795141, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1389499276406476, Elapsed = 00:33:27.1925900, TimeTotal = 17:45:44.7151522, Remaining = 17:12:17.5225622, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:27.1925900, HeatingEstimate = 00:36:32.8204859, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1389499276406476;StartedAtUtc;00:33:27.1925900;17:45:44.7151522;17:12:17.5225622;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:27.1925900;00:36:32.8204859;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0573992 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:23:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2008.1844771, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.140521478580423, Elapsed = 00:33:28.1975125, TimeTotal = 17:45:44.7151117, Remaining = 17:12:16.5175992, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:28.1975125, HeatingEstimate = 00:36:31.8155229, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.140521478580423;StartedAtUtc;00:33:28.1975125;17:45:44.7151117;17:12:16.5175992;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:28.1975125;00:36:31.8155229;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2009.1841275, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1420847951744575, Elapsed = 00:33:29.1971711, TimeTotal = 17:45:44.7151199, Remaining = 17:12:15.5179488, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:29.1971711, HeatingEstimate = 00:36:30.8158725, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1420847951744575;StartedAtUtc;00:33:29.1971711;17:45:44.7151199;17:12:15.5179488;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:29.1971711;00:36:30.8158725;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2010.1887548, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.14365586793615, Elapsed = 00:33:30.2017888, TimeTotal = 17:45:44.7151103, Remaining = 17:12:14.5133215, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:30.2017888, HeatingEstimate = 00:36:29.8112452, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.14365586793615;StartedAtUtc;00:33:30.2017888;17:45:44.7151103;17:12:14.5133215;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:30.2017888;00:36:29.8112452;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2011.1921338, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1452250539767377, Elapsed = 00:33:31.2052014, TimeTotal = 17:45:44.7151439, Remaining = 17:12:13.5099425, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:31.2052014, HeatingEstimate = 00:36:28.8078662, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1452250539767377;StartedAtUtc;00:33:31.2052014;17:45:44.7151439;17:12:13.5099425;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:31.2052014;00:36:28.8078662;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2012.1938831, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.146791594168001, Elapsed = 00:33:32.2069201, TimeTotal = 17:45:44.7151133, Remaining = 17:12:12.5081932, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:32.2069201, HeatingEstimate = 00:36:27.8061169, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.146791594168001;StartedAtUtc;00:33:32.2069201;17:45:44.7151133;17:12:12.5081932;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:32.2069201;00:36:27.8061169;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=69.04166666666667,powderChamber1=69.04166666666667,powderChamber2=69.04166666666667,powderChamber3=69.04166666666667,powderChamber4=69.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:23:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2013.1942572, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.148356217458152, Elapsed = 00:33:33.2074179, TimeTotal = 17:45:44.7152370, Remaining = 17:12:11.5078191, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:33.2074179, HeatingEstimate = 00:36:26.8057428, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.148356217458152;StartedAtUtc;00:33:33.2074179;17:45:44.7152370;17:12:11.5078191;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:33.2074179;00:36:26.8057428;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2014.1918973, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1499161878893256, Elapsed = 00:33:34.2049326, TimeTotal = 17:45:44.7151116, Remaining = 17:12:10.5101790, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:34.2049326, HeatingEstimate = 00:36:25.8081027, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1499161878893256;StartedAtUtc;00:33:34.2049326;17:45:44.7151116;17:12:10.5101790;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:34.2049326;00:36:25.8081027;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3951638. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:23:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:23:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:23:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2015.1969951, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.151488024918091, Elapsed = 00:33:35.2100396, TimeTotal = 17:45:44.7151208, Remaining = 17:12:09.5050812, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:35.2100396, HeatingEstimate = 00:36:24.8030049, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.151488024918091;StartedAtUtc;00:33:35.2100396;17:45:44.7151208;17:12:09.5050812;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:35.2100396;00:36:24.8030049;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2016.1977217, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.153053026647189, Elapsed = 00:33:36.2107758, TimeTotal = 17:45:44.7151304, Remaining = 17:12:08.5043546, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:36.2107758, HeatingEstimate = 00:36:23.8022783, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.153053026647189;StartedAtUtc;00:33:36.2107758;17:45:44.7151304;17:12:08.5043546;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:36.2107758;00:36:23.8022783;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2017.1965579, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1546155109792307, Elapsed = 00:33:37.2099114, TimeTotal = 17:45:44.7154298, Remaining = 17:12:07.5055184, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:37.2099114, HeatingEstimate = 00:36:22.8034421, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1546155109792307;StartedAtUtc;00:33:37.2099114;17:45:44.7154298;17:12:07.5055184;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:37.2099114;00:36:22.8034421;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2018.1967041, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1561791204034955, Elapsed = 00:33:38.2097472, TimeTotal = 17:45:44.7151194, Remaining = 17:12:06.5053722, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:36.0384011, WeightTotalEstimate = 08:13:36.0384011, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:18.6682047, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:03.5338716, HeatingElapsed = 00:33:38.2097472, HeatingEstimate = 00:36:21.8032959, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:28.0462177, WeightEstimate = 08:13:36.0384011 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:35:44. coolingEstimate=04:18:03.5338716 [PrintingService.cs@1912] +06/28/2026 14:23:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1561791204034955;StartedAtUtc;00:33:38.2097472;17:45:44.7151194;17:12:06.5053722;False;661;0;0;00:00:00;08:13:36.0384011;08:13:36.0384011;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:18.6682047;00:00:00;04:18:03.5338716;00:33:38.2097472;00:36:21.8032959;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:28.0462177 [PrintingService.cs@1918] +06/28/2026 14:23:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=444794, estimate=86.77210863883197 for layer 49, Z=4.901003 [PrintingService.cs@1524] +06/28/2026 14:23:38 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=58.75 that are outside of set tolerance 10 for current step target 69.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:23:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 41, island count 3 [PrintingService.cs@1569] +06/28/2026 14:23:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 50, start=0, count=661, Z=5.001003 [PrintingService.cs@1518] +06/28/2026 14:23:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1589, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:23:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2019.1961679, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1565928646974566, Elapsed = 00:33:39.2107713, TimeTotal = 17:46:08.0458599, Remaining = 17:12:28.8350886, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:39.2107713, HeatingEstimate = 00:36:20.8038321, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1565928646974566;StartedAtUtc;00:33:39.2107713;17:46:08.0458599;17:12:28.8350886;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:39.2107713;00:36:20.8038321;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2020.2027678, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.158164150518571, Elapsed = 00:33:40.2158439, TimeTotal = 17:46:08.0443326, Remaining = 17:12:27.8284887, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:40.2158439, HeatingEstimate = 00:36:19.7972322, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.158164150518571;StartedAtUtc;00:33:40.2158439;17:46:08.0443326;17:12:27.8284887;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:40.2158439;00:36:19.7972322;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2021.2047111, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.159731473613223, Elapsed = 00:33:41.2184508, TimeTotal = 17:46:08.0449962, Remaining = 17:12:26.8265454, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:41.2184508, HeatingEstimate = 00:36:18.7952889, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.159731473613223;StartedAtUtc;00:33:41.2184508;17:46:08.0449962;17:12:26.8265454;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:41.2184508;00:36:18.7952889;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=70.04166666666667,powderChamber1=70.04166666666667,powderChamber2=70.04166666666667,powderChamber3=70.04166666666667,powderChamber4=70.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:23:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2022.2036973, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1612926309717384, Elapsed = 00:33:42.2170814, TimeTotal = 17:46:08.0446406, Remaining = 17:12:25.8275592, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:42.2170814, HeatingEstimate = 00:36:17.7963027, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1612926309717384;StartedAtUtc;00:33:42.2170814;17:46:08.0446406;17:12:25.8275592;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:42.2170814;00:36:17.7963027;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2023.20612, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1628617972096817, Elapsed = 00:33:43.2208902, TimeTotal = 17:46:08.0460267, Remaining = 17:12:24.8251365, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:43.2208902, HeatingEstimate = 00:36:16.7938800, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1628617972096817;StartedAtUtc;00:33:43.2208902;17:46:08.0460267;17:12:24.8251365;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:43.2208902;00:36:16.7938800;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2024.2157041, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.164438089379937, Elapsed = 00:33:44.2291723, TimeTotal = 17:46:08.0447247, Remaining = 17:12:23.8155524, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:44.2291723, HeatingEstimate = 00:36:15.7842959, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.164438089379937;StartedAtUtc;00:33:44.2291723;17:46:08.0447247;17:12:23.8155524;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:44.2291723;00:36:15.7842959;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2025.2160199, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1660016581908463, Elapsed = 00:33:45.2293524, TimeTotal = 17:46:08.0445890, Remaining = 17:12:22.8152366, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:45.2293524, HeatingEstimate = 00:36:14.7839801, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1660016581908463;StartedAtUtc;00:33:45.2293524;17:46:08.0445890;17:12:22.8152366;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:45.2293524;00:36:14.7839801;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2026.2200728, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.16757125094703, Elapsed = 00:33:46.2333897, TimeTotal = 17:46:08.0445734, Remaining = 17:12:21.8111837, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:46.2333897, HeatingEstimate = 00:36:13.7799272, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.16757125094703;StartedAtUtc;00:33:46.2333897;17:46:08.0445734;17:12:21.8111837;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:46.2333897;00:36:13.7799272;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (155 cases) [SoftAnalysisSurfaceHeater.cs@800] +06/28/2026 14:23:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2027.2288103, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1691477692377372, Elapsed = 00:33:47.2418488, TimeTotal = 17:46:08.0442950, Remaining = 17:12:20.8024462, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:47.2418488, HeatingEstimate = 00:36:12.7711897, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1691477692377372;StartedAtUtc;00:33:47.2418488;17:46:08.0442950;17:12:20.8024462;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:47.2418488;00:36:12.7711897;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=59.25 that are outside of set tolerance 10 for current step target 70.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:23:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2028.2291838, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1707122007183943, Elapsed = 00:33:48.2425969, TimeTotal = 17:46:08.0446696, Remaining = 17:12:19.8020727, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:48.2425969, HeatingEstimate = 00:36:11.7708162, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1707122007183943;StartedAtUtc;00:33:48.2425969;17:46:08.0446696;17:12:19.8020727;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:48.2425969;00:36:11.7708162;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2029.2294916, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.17227575522129, Elapsed = 00:33:49.2427678, TimeTotal = 17:46:08.0445327, Remaining = 17:12:18.8017649, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:49.2427678, HeatingEstimate = 00:36:10.7705084, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.17227575522129;StartedAtUtc;00:33:49.2427678;17:46:08.0445327;17:12:18.8017649;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:49.2427678;00:36:10.7705084;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2030.2282949, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.173837710520671, Elapsed = 00:33:50.2419315, TimeTotal = 17:46:08.0448931, Remaining = 17:12:17.8029616, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:50.2419315, HeatingEstimate = 00:36:09.7717051, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.173837710520671;StartedAtUtc;00:33:50.2419315;17:46:08.0448931;17:12:17.8029616;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:50.2419315;00:36:09.7717051;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2031.228603, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1754005630133935, Elapsed = 00:33:51.2416386, TimeTotal = 17:46:08.0442921, Remaining = 17:12:16.8026535, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:51.2416386, HeatingEstimate = 00:36:08.7713970, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1754005630133935;StartedAtUtc;00:33:51.2416386;17:46:08.0442921;17:12:16.8026535;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:51.2416386;00:36:08.7713970;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2032.2335018, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1769715170580985, Elapsed = 00:33:52.2465475, TimeTotal = 17:46:08.0443022, Remaining = 17:12:15.7977547, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:52.2465475, HeatingEstimate = 00:36:07.7664982, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1769715170580985;StartedAtUtc;00:33:52.2465475;17:46:08.0443022;17:12:15.7977547;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:52.2465475;00:36:07.7664982;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2033.2323489, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1785335059957434, Elapsed = 00:33:53.2457320, TimeTotal = 17:46:08.0446396, Remaining = 17:12:14.7989076, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:53.2457320, HeatingEstimate = 00:36:06.7676511, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1785335059957434;StartedAtUtc;00:33:53.2457320;17:46:08.0446396;17:12:14.7989076;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:53.2457320;00:36:06.7676511;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.4657440185547, Elapsed=00:00:30.2119468 [ControlledHeating.cs@486] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.4657440185547 after 00:00:30.2120039 [ControlledHeating.cs@493] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2957254. SinceCollect=00:01:00.7140585. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=7640, gen1=1608, gen2=69, LatencyMode=Interactive, FreeMemory=5798264832, Live=490904264, HeapSizeBytes=539551688, FragmentedBytes=49264840, TotalCommittedBytes=548356096, PinnedObjectsCount=106, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634320. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0644626. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0756275. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:23:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 335904214342 (335904214342 @ 0) for mcu = 2784.629012 [28/06/2026 12:37:35] (2799.2017861833333 sec) to 338353196756 (from now=338233196756, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 335904214342 (335904214342 @ 0) for mcu = 2784.629012 [28/06/2026 12:37:35] (2799.2017861833333 sec) to 338353196756 (from external timestamp, flags=None, requested=338353196756 (338353196756 @ 0) for mcu = 2805.037575 [28/06/2026 12:37:55] (2819.6099729666666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 335904214342 (335904214342 @ 0) for mcu = 2784.629012 [28/06/2026 12:37:35] (2799.2017861833333 sec) to 338353196756 (from external timestamp, flags=None, requested=338353196756 (338353196756 @ 0) for mcu = 2805.037575 [28/06/2026 12:37:55] (2819.6099729666666 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2034.2382658, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.180105572714883, Elapsed = 00:33:54.2513426, TimeTotal = 17:46:08.0443333, Remaining = 17:12:13.7929907, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:54.2513426, HeatingEstimate = 00:36:05.7617342, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.180105572714883;StartedAtUtc;00:33:54.2513426;17:46:08.0443333;17:12:13.7929907;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:54.2513426;00:36:05.7617342;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2035.2475581, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1816833494733494, Elapsed = 00:33:55.2606149, TimeTotal = 17:46:08.0443133, Remaining = 17:12:12.7836984, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:55.2606149, HeatingEstimate = 00:36:04.7524419, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1816833494733494;StartedAtUtc;00:33:55.2606149;17:46:08.0443133;17:12:12.7836984;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:55.2606149;00:36:04.7524419;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2036.2568016, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.183261052214988, Elapsed = 00:33:56.2698399, TimeTotal = 17:46:08.0442948, Remaining = 17:12:11.7744549, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:56.2698399, HeatingEstimate = 00:36:03.7431984, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.183261052214988;StartedAtUtc;00:33:56.2698399;17:46:08.0442948;17:12:11.7744549;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:56.2698399;00:36:03.7431984;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2037.2561732, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.18482335207265, Elapsed = 00:33:57.2692126, TimeTotal = 17:46:08.0442959, Remaining = 17:12:10.7750833, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:57.2692126, HeatingEstimate = 00:36:02.7438268, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.18482335207265;StartedAtUtc;00:33:57.2692126;17:46:08.0442959;17:12:10.7750833;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:57.2692126;00:36:02.7438268;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2038.2556298, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1863858333914417, Elapsed = 00:33:58.2687024, TimeTotal = 17:46:08.0443291, Remaining = 17:12:09.7756267, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:58.2687024, HeatingEstimate = 00:36:01.7443702, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1863858333914417;StartedAtUtc;00:33:58.2687024;17:46:08.0443291;17:12:09.7756267;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:58.2687024;00:36:01.7443702;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2039.2595051, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1879551277861657, Elapsed = 00:33:59.2725484, TimeTotal = 17:46:08.0442998, Remaining = 17:12:08.7717514, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:33:59.2725484, HeatingEstimate = 00:36:00.7404949, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1879551277861657;StartedAtUtc;00:33:59.2725484;17:46:08.0442998;17:12:08.7717514;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:33:59.2725484;00:36:00.7404949;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:23:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2040.2610952, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.189520926655299, Elapsed = 00:34:00.2741600, TimeTotal = 17:46:08.0443213, Remaining = 17:12:07.7701613, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:00.2741600, HeatingEstimate = 00:35:59.7389048, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:23:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.189520926655299;StartedAtUtc;00:34:00.2741600;17:46:08.0443213;17:12:07.7701613;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:00.2741600;00:35:59.7389048;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2041.2634551, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.191087861288001, Elapsed = 00:34:01.2764967, TimeTotal = 17:46:08.0442981, Remaining = 17:12:06.7678014, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:01.2764967, HeatingEstimate = 00:35:58.7365449, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.191087861288001;StartedAtUtc;00:34:01.2764967;17:46:08.0442981;17:12:06.7678014;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:01.2764967;00:35:58.7365449;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2042.2642918, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.192652461950049, Elapsed = 00:34:02.2773414, TimeTotal = 17:46:08.0443061, Remaining = 17:12:05.7669647, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:02.2773414, HeatingEstimate = 00:35:57.7357082, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.192652461950049;StartedAtUtc;00:34:02.2773414;17:46:08.0443061;17:12:05.7669647;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:02.2773414;00:35:57.7357082;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2043.2662125, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1942187378370033, Elapsed = 00:34:03.2792573, TimeTotal = 17:46:08.0443013, Remaining = 17:12:04.7650440, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:03.2792573, HeatingEstimate = 00:35:56.7337875, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1942187378370033;StartedAtUtc;00:34:03.2792573;17:46:08.0443013;17:12:04.7650440;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:03.2792573;00:35:56.7337875;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2044.2685523, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.195786145742665, Elapsed = 00:34:04.2819074, TimeTotal = 17:46:08.0446116, Remaining = 17:12:03.7627042, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:04.2819074, HeatingEstimate = 00:35:55.7314477, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.195786145742665;StartedAtUtc;00:34:04.2819074;17:46:08.0446116;17:12:03.7627042;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:04.2819074;00:35:55.7314477;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1805241. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:24:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:24:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2045.2689389, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1973495989138705, Elapsed = 00:34:05.2820087, TimeTotal = 17:46:08.0443263, Remaining = 17:12:02.7623176, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:05.2820087, HeatingEstimate = 00:35:54.7310611, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1973495989138705;StartedAtUtc;00:34:05.2820087;17:46:08.0443263;17:12:02.7623176;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:05.2820087;00:35:54.7310611;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2046.2726152, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.1989185752598, Elapsed = 00:34:06.2856511, TimeTotal = 17:46:08.0442924, Remaining = 17:12:01.7586413, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:06.2856511, HeatingEstimate = 00:35:53.7273848, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1989185752598;StartedAtUtc;00:34:06.2856511;17:46:08.0442924;17:12:01.7586413;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:06.2856511;00:35:53.7273848;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2047.2727012, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2004820317233063, Elapsed = 00:34:07.2857645, TimeTotal = 17:46:08.0443198, Remaining = 17:12:00.7585553, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:07.2857645, HeatingEstimate = 00:35:52.7272988, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2004820317233063;StartedAtUtc;00:34:07.2857645;17:46:08.0443198;17:12:00.7585553;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:07.2857645;00:35:52.7272988;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2048.2719906, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2020442171513794, Elapsed = 00:34:08.2850643, TimeTotal = 17:46:08.0443302, Remaining = 17:11:59.7592659, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:08.2850643, HeatingEstimate = 00:35:51.7280094, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2020442171513794;StartedAtUtc;00:34:08.2850643;17:46:08.0443302;17:11:59.7592659;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:08.2850643;00:35:51.7280094;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2049.2745242, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2036156793539057, Elapsed = 00:34:09.2903873, TimeTotal = 17:46:08.0471196, Remaining = 17:11:58.7567323, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:09.2903873, HeatingEstimate = 00:35:50.7254758, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2036156793539057;StartedAtUtc;00:34:09.2903873;17:46:08.0471196;17:11:58.7567323;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:09.2903873;00:35:50.7254758;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2050.2817361, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.205186300114854, Elapsed = 00:34:10.2949994, TimeTotal = 17:46:08.0445198, Remaining = 17:11:57.7495204, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:10.2949994, HeatingEstimate = 00:35:49.7182639, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.205186300114854;StartedAtUtc;00:34:10.2949994;17:46:08.0445198;17:11:57.7495204;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:10.2949994;00:35:49.7182639;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2051.2810306, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.20674814245919, Elapsed = 00:34:11.2940723, TimeTotal = 17:46:08.0442982, Remaining = 17:11:56.7502259, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:11.2940723, HeatingEstimate = 00:35:48.7189694, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.20674814245919;StartedAtUtc;00:34:11.2940723;17:46:08.0442982;17:11:56.7502259;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:11.2940723;00:35:48.7189694;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2052.279704, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2083093624849472, Elapsed = 00:34:12.2927545, TimeTotal = 17:46:08.0443070, Remaining = 17:11:55.7515525, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:12.2927545, HeatingEstimate = 00:35:47.7202960, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2083093624849472;StartedAtUtc;00:34:12.2927545;17:46:08.0443070;17:11:55.7515525;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:12.2927545;00:35:47.7202960;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2053.2897366, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.209895275727332, Elapsed = 00:34:13.3073796, TimeTotal = 17:46:08.0488995, Remaining = 17:11:54.7415199, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:13.3073796, HeatingEstimate = 00:35:46.7102634, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.209895275727332;StartedAtUtc;00:34:13.3073796;17:46:08.0488995;17:11:54.7415199;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:13.3073796;00:35:46.7102634;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2054.3006604, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2114686623940765, Elapsed = 00:34:14.3136964, TimeTotal = 17:46:08.0442925, Remaining = 17:11:53.7305961, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:14.3136964, HeatingEstimate = 00:35:45.6993396, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2114686623940765;StartedAtUtc;00:34:14.3136964;17:46:08.0442925;17:11:53.7305961;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:14.3136964;00:35:45.6993396;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2055.3059627, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.213043536742425, Elapsed = 00:34:15.3211829, TimeTotal = 17:46:08.0464767, Remaining = 17:11:52.7252938, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:15.3211829, HeatingEstimate = 00:35:44.6940373, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.213043536742425;StartedAtUtc;00:34:15.3211829;17:46:08.0464767;17:11:52.7252938;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:15.3211829;00:35:44.6940373;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2056.3107369, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2146109801438576, Elapsed = 00:34:16.3237757, TimeTotal = 17:46:08.0442953, Remaining = 17:11:51.7205196, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:16.3237757, HeatingEstimate = 00:35:43.6892631, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2146109801438576;StartedAtUtc;00:34:16.3237757;17:46:08.0442953;17:11:51.7205196;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:16.3237757;00:35:43.6892631;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2057.3119765, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.216176190828434, Elapsed = 00:34:17.3250102, TimeTotal = 17:46:08.0442902, Remaining = 17:11:50.7192800, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:17.3250102, HeatingEstimate = 00:35:42.6880235, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.216176190828434;StartedAtUtc;00:34:17.3250102;17:46:08.0442902;17:11:50.7192800;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:17.3250102;00:35:42.6880235;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2058.3134252, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2177419296213294, Elapsed = 00:34:18.3265868, TimeTotal = 17:46:08.0444181, Remaining = 17:11:49.7178313, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:18.3265868, HeatingEstimate = 00:35:41.6865748, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2177419296213294;StartedAtUtc;00:34:18.3265868;17:46:08.0444181;17:11:49.7178313;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:18.3265868;00:35:41.6865748;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2059.3135056, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.219305207112029, Elapsed = 00:34:19.3265821, TimeTotal = 17:46:08.0443330, Remaining = 17:11:48.7177509, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:19.3265821, HeatingEstimate = 00:35:40.6864944, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.219305207112029;StartedAtUtc;00:34:19.3265821;17:46:08.0443330;17:11:48.7177509;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:19.3265821;00:35:40.6864944;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2060.3159845, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2208782956861306, Elapsed = 00:34:20.3329824, TimeTotal = 17:46:08.0482544, Remaining = 17:11:47.7152720, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:20.3329824, HeatingEstimate = 00:35:39.6840155, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2208782956861306;StartedAtUtc;00:34:20.3329824;17:46:08.0482544;17:11:47.7152720;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:20.3329824;00:35:39.6840155;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2061.3214672, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2224442224596883, Elapsed = 00:34:21.3345490, TimeTotal = 17:46:08.0443383, Remaining = 17:11:46.7097893, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:21.3345490, HeatingEstimate = 00:35:38.6785328, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2224442224596883;StartedAtUtc;00:34:21.3345490;17:46:08.0443383;17:11:46.7097893;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:21.3345490;00:35:38.6785328;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2062.3203014, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2240056525561887, Elapsed = 00:34:22.3333647, TimeTotal = 17:46:08.0443198, Remaining = 17:11:45.7109551, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:22.3333647, HeatingEstimate = 00:35:37.6796986, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2240056525561887;StartedAtUtc;00:34:22.3333647;17:46:08.0443198;17:11:45.7109551;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:22.3333647;00:35:37.6796986;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2063.321463, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2255709125603125, Elapsed = 00:34:23.3346344, TimeTotal = 17:46:08.0444279, Remaining = 17:11:44.7097935, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:13:53.3192753, WeightTotalEstimate = 08:13:53.3192753, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:17:35.9490789, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:09.5821776, HeatingElapsed = 00:34:23.3346344, HeatingEstimate = 00:35:36.6785370, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:33:45.3270919, WeightEstimate = 08:13:53.3192753 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:07. coolingEstimate=04:18:09.5821776 [PrintingService.cs@1912] +06/28/2026 14:24:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2255709125603125;StartedAtUtc;00:34:23.3346344;17:46:08.0444279;17:11:44.7097935;False;661;0;0;00:00:00;08:13:53.3192753;08:13:53.3192753;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:17:35.9490789;00:00:00;04:18:09.5821776;00:34:23.3346344;00:35:36.6785370;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:33:45.3270919 [PrintingService.cs@1918] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=331850, estimate=81.43845721469847 for layer 50, Z=5.001003 [PrintingService.cs@1524] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 42, island count 3 [PrintingService.cs@1569] +06/28/2026 14:24:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 51, start=0, count=661, Z=5.1010027 [PrintingService.cs@1518] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1547, instances=14 (object-per-object) [PrintingService.cs@263] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.32373046875, Elapsed=00:00:30.4992227 [ControlledHeating.cs@486] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.32373046875 after 00:00:30.4995342 [ControlledHeating.cs@493] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2031551. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633789. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2672675. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2807288. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:24:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 955.3872140041974, Z2 = 1200 } } [LayerClient.cs@969] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 339564717984 (339564717984 @ 0) for mcu = 2815.133787 [28/06/2026 12:38:06] (2829.7059832 sec) to 341977744705 (from now=341857744705, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 339564717984 (339564717984 @ 0) for mcu = 2815.133787 [28/06/2026 12:38:06] (2829.7059832 sec) to 341977744705 (from external timestamp, flags=None, requested=341977744705 (341977744705 @ 0) for mcu = 2835.242726 [28/06/2026 12:38:26] (2849.8145392083334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 339564717984 (339564717984 @ 0) for mcu = 2815.133787 [28/06/2026 12:38:06] (2829.7059832 sec) to 341977744705 (from external timestamp, flags=None, requested=341977744705 (341977744705 @ 0) for mcu = 2835.242726 [28/06/2026 12:38:26] (2849.8145392083334 sec), advance=0) [McuStepper.cs@843] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2064.3207201, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.224817549888019, Elapsed = 00:34:24.3340063, TimeTotal = 17:46:53.9782907, Remaining = 17:12:29.6442844, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:24.3340063, HeatingEstimate = 00:35:35.6792799, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.224817549888019;StartedAtUtc;00:34:24.3340063;17:46:53.9782907;17:12:29.6442844;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:24.3340063;00:35:35.6792799;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2065.3212059, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.226380086478327, Elapsed = 00:34:25.3342400, TimeTotal = 17:46:53.9780386, Remaining = 17:12:28.6437986, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:25.3342400, HeatingEstimate = 00:35:34.6787941, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.226380086478327;StartedAtUtc;00:34:25.3342400;17:46:53.9780386;17:12:28.6437986;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:25.3342400;00:35:34.6787941;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2066.3267961, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.227950993794362, Elapsed = 00:34:26.3398406, TimeTotal = 17:46:53.9780490, Remaining = 17:12:27.6382084, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:26.3398406, HeatingEstimate = 00:35:33.6732039, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.227950993794362;StartedAtUtc;00:34:26.3398406;17:46:53.9780490;17:12:27.6382084;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:26.3398406;00:35:33.6732039;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=71.04166666666667,powderChamber1=71.04166666666667,powderChamber2=71.04166666666667,powderChamber3=71.04166666666667,powderChamber4=71.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:24:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2067.3276301, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.229514454994855, Elapsed = 00:34:27.3406743, TimeTotal = 17:46:53.9780487, Remaining = 17:12:26.6373744, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:27.3406743, HeatingEstimate = 00:35:32.6723699, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.229514454994855;StartedAtUtc;00:34:27.3406743;17:46:53.9780487;17:12:26.6373744;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:27.3406743;00:35:32.6723699;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0935509 ~ 5.99 samples/sec, 3 resets, 3 ignored frames) [Mlx90640Camera.cs@313] +06/28/2026 14:24:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2068.3282239, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2310789481916653, Elapsed = 00:34:28.3421987, TimeTotal = 17:46:53.9789793, Remaining = 17:12:25.6367806, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:28.3421987, HeatingEstimate = 00:35:31.6717761, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2310789481916653;StartedAtUtc;00:34:28.3421987;17:46:53.9789793;17:12:25.6367806;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:28.3421987;00:35:31.6717761;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2069.3315195, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2326448944369273, Elapsed = 00:34:29.3445941, TimeTotal = 17:46:53.9780791, Remaining = 17:12:24.6334850, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:29.3445941, HeatingEstimate = 00:35:30.6684805, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2326448944369273;StartedAtUtc;00:34:29.3445941;17:46:53.9780791;17:12:24.6334850;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:29.3445941;00:35:30.6684805;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2070.3317099, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2342077207331204, Elapsed = 00:34:30.3450293, TimeTotal = 17:46:53.9783239, Remaining = 17:12:23.6332946, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:30.3450293, HeatingEstimate = 00:35:29.6682901, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2342077207331204;StartedAtUtc;00:34:30.3450293;17:46:53.9783239;17:12:23.6332946;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:30.3450293;00:35:29.6682901;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2071.3381299, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.235779478092754, Elapsed = 00:34:31.3511645, TimeTotal = 17:46:53.9780391, Remaining = 17:12:22.6268746, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:31.3511645, HeatingEstimate = 00:35:28.6618701, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.235779478092754;StartedAtUtc;00:34:31.3511645;17:46:53.9780391;17:12:22.6268746;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:31.3511645;00:35:28.6618701;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2072.3381166, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.237343154017814, Elapsed = 00:34:32.3521686, TimeTotal = 17:46:53.9790565, Remaining = 17:12:21.6268879, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:32.3521686, HeatingEstimate = 00:35:27.6618834, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.237343154017814;StartedAtUtc;00:34:32.3521686;17:46:53.9790565;17:12:21.6268879;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:32.3521686;00:35:27.6618834;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=60.25 that are outside of set tolerance 10 for current step target 71.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:24:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2073.3408404, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2389084601423352, Elapsed = 00:34:33.3541596, TimeTotal = 17:46:53.9783237, Remaining = 17:12:20.6241641, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:33.3541596, HeatingEstimate = 00:35:26.6591596, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2389084601423352;StartedAtUtc;00:34:33.3541596;17:46:53.9783237;17:12:20.6241641;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:33.3541596;00:35:26.6591596;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2074.3402133, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2404692154842754, Elapsed = 00:34:34.3532521, TimeTotal = 17:46:53.9780433, Remaining = 17:12:19.6247912, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:34.3532521, HeatingEstimate = 00:35:25.6597867, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2404692154842754;StartedAtUtc;00:34:34.3532521;17:46:53.9780433;17:12:19.6247912;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:34.3532521;00:35:25.6597867;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9942374. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3889002. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] +06/28/2026 14:24:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] +06/28/2026 14:24:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] +06/28/2026 14:24:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2075.3405284, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2420318674411206, Elapsed = 00:34:35.3535678, TimeTotal = 17:46:53.9780439, Remaining = 17:12:18.6244761, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:35.3535678, HeatingEstimate = 00:35:24.6594716, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2420318674411206;StartedAtUtc;00:34:35.3535678;17:46:53.9780439;17:12:18.6244761;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:35.3535678;00:35:24.6594716;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=72.04166666666667,powderChamber1=72.04166666666667,powderChamber2=72.04166666666667,powderChamber3=72.04166666666667,powderChamber4=72.04166666666667 [ControlledHeating.cs@169] +06/28/2026 14:24:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] approaching new target of 72.041664 with temperature 66.96428680419922 [HeaterCheck.cs@88] +06/28/2026 14:24:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 72.041664 with temperature 67.14286041259766 [HeaterCheck.cs@67] +06/28/2026 14:24:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 72.041664 with temperature 67.07142639160156 [HeaterCheck.cs@67] +06/28/2026 14:24:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2076.3485906, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.243606722112468, Elapsed = 00:34:36.3616971, TimeTotal = 17:46:53.9781110, Remaining = 17:12:17.6164139, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:36.3616971, HeatingEstimate = 00:35:23.6514094, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.243606722112468;StartedAtUtc;00:34:36.3616971;17:46:53.9781110;17:12:17.6164139;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:36.3616971;00:35:23.6514094;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 72.041664 with temperature 67.10713958740234 [HeaterCheck.cs@67] +06/28/2026 14:24:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2077.3487379, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.245169031829784, Elapsed = 00:34:37.3617920, TimeTotal = 17:46:53.9780586, Remaining = 17:12:16.6162666, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:37.3617920, HeatingEstimate = 00:35:22.6512621, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.245169031829784;StartedAtUtc;00:34:37.3617920;17:46:53.9780586;17:12:16.6162666;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:37.3617920;00:35:22.6512621;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 72.041664 with temperature 67.32142639160156 [HeaterCheck.cs@67] +06/28/2026 14:24:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2078.3485143, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2467308185216552, Elapsed = 00:34:38.3615533, TimeTotal = 17:46:53.9780435, Remaining = 17:12:15.6164902, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:38.3615533, HeatingEstimate = 00:35:21.6514857, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2467308185216552;StartedAtUtc;00:34:38.3615533;17:46:53.9780435;17:12:15.6164902;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:38.3615533;00:35:21.6514857;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2079.3484312, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2482928482756552, Elapsed = 00:34:39.3614707, TimeTotal = 17:46:53.9780440, Remaining = 17:12:14.6165733, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:39.3614707, HeatingEstimate = 00:35:20.6515688, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2482928482756552;StartedAtUtc;00:34:39.3614707;17:46:53.9780440;17:12:14.6165733;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:39.3614707;00:35:20.6515688;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2080.3490942, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2498560373596193, Elapsed = 00:34:40.3621301, TimeTotal = 17:46:53.9780404, Remaining = 17:12:13.6159103, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:40.3621301, HeatingEstimate = 00:35:19.6509058, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2498560373596193;StartedAtUtc;00:34:40.3621301;17:46:53.9780404;17:12:13.6159103;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:40.3621301;00:35:19.6509058;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.041664 with temperature 67.5 [HeaterCheck.cs@67] +06/28/2026 14:24:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2081.3533233, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2514258231738022, Elapsed = 00:34:41.3670344, TimeTotal = 17:46:53.9787156, Remaining = 17:12:12.6116812, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:41.3670344, HeatingEstimate = 00:35:18.6466767, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2514258231738022;StartedAtUtc;00:34:41.3670344;17:46:53.9787156;17:12:12.6116812;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:41.3670344;00:35:18.6466767;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=61.25 that are outside of set tolerance 10 for current step target 72.04166666666667 and final target 145 [ControlledHeating.cs@205] +06/28/2026 14:24:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2082.354394, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2529886812703004, Elapsed = 00:34:42.3674611, TimeTotal = 17:46:53.9780716, Remaining = 17:12:11.6106105, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:42.3674611, HeatingEstimate = 00:35:17.6456060, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2529886812703004;StartedAtUtc;00:34:42.3674611;17:46:53.9780716;17:12:11.6106105;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:42.3674611;00:35:17.6456060;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2083.3565879, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2545561822938986, Elapsed = 00:34:43.3709221, TimeTotal = 17:46:53.9793387, Remaining = 17:12:10.6084166, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:43.3709221, HeatingEstimate = 00:35:16.6434121, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2545561822938986;StartedAtUtc;00:34:43.3709221;17:46:53.9793387;17:12:10.6084166;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:43.3709221;00:35:16.6434121;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2084.3603018, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.2561221935117923, Elapsed = 00:34:44.3733462, TimeTotal = 17:46:53.9780489, Remaining = 17:12:09.6047027, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:44.3733462, HeatingEstimate = 00:35:15.6396982, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912] +06/28/2026 14:24:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2561221935117923;StartedAtUtc;00:34:44.3733462;17:46:53.9780489;17:12:09.6047027;False;661;0;0;00:00:00;08:14:27.3442738;08:14:27.3442738;00:00:00;00:00:00;00:00:00;00:00:15.1422206;00:00:00;00:00:00.0210436;12:18:09.9740774;00:00:00;04:18:21.4909271;00:34:44.3733462;00:35:15.6396982;00:00:00;00:00:22.5000000;177;00:00:00;00:39:18.4886780;00:00:00;00:04:32.1333090;00:00:00;11:34:19.3520904 [PrintingService.cs@1918] +06/28/2026 14:24:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2085.3666915, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 28/06/2026 12:49:57, Progress = 3.257697917268894, Elapsed = 00:34:45.3821069, TimeTotal = 17:46:53.9804199, Remaining = 17:12:08.5983130, Incomplete = False, SoftCount = 661, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 08:14:27.3442738, WeightTotalEstimate = 08:14:27.3442738, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.1422206, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0210436, TimeLayers = 12:18:09.9740774, CoolingElapsed = 00:00:00, CoolingEstimate = 04:18:21.4909271, HeatingElapsed = 00:34:45.3821069, HeatingEstimate = 00:35:14.6333085, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:22.5000000, CoolingFrom = 177, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:39:18.4886780, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:04:32.1333090, JobElapsed = 00:00:00, JobTotal = 11:34:19.3520904, WeightEstimate = 08:14:27.3442738 }, JobName = Hex Coasters and Nameplates and Benchies 2026_06_28 }. UTC calculatedEstimate: 06/29/2026 06:36:53. coolingEstimate=04:18:21.4909271 [PrintingService.cs@1912]