The full dataset viewer is not available (click to read why). Only showing a preview of the rows.
The dataset generation failed
Error code: DatasetGenerationError
Exception: TypeError
Message: Couldn't cast array of type
struct<is_compliant: bool, constraints: list<item: struct<type: string, description: string, value: string, unit: string>>, evidence: list<item: struct<segment_id: string, quote: string>>, is_coftpliant: bool>
to
{'is_compliant': Value('bool'), 'constraints': List({'type': Value('string'), 'description': Value('string'), 'value': Value('string'), 'unit': Value('string')}), 'evidence': List({'segment_id': Value('string'), 'quote': Value('string')})}
Traceback: Traceback (most recent call last):
File "/usr/local/lib/python3.12/site-packages/datasets/builder.py", line 1887, in _prepare_split_single
writer.write_table(table)
File "/usr/local/lib/python3.12/site-packages/datasets/arrow_writer.py", line 675, in write_table
pa_table = table_cast(pa_table, self._schema)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/datasets/table.py", line 2272, in table_cast
return cast_table_to_schema(table, schema)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/datasets/table.py", line 2224, in cast_table_to_schema
cast_array_to_feature(
File "/usr/local/lib/python3.12/site-packages/datasets/table.py", line 1795, in wrapper
return pa.chunked_array([func(chunk, *args, **kwargs) for chunk in array.chunks])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/datasets/table.py", line 2092, in cast_array_to_feature
raise TypeError(f"Couldn't cast array of type\n{_short_str(array.type)}\nto\n{_short_str(feature)}")
TypeError: Couldn't cast array of type
struct<is_compliant: bool, constraints: list<item: struct<type: string, description: string, value: string, unit: string>>, evidence: list<item: struct<segment_id: string, quote: string>>, is_coftpliant: bool>
to
{'is_compliant': Value('bool'), 'constraints': List({'type': Value('string'), 'description': Value('string'), 'value': Value('string'), 'unit': Value('string')}), 'evidence': List({'segment_id': Value('string'), 'quote': Value('string')})}
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/src/services/worker/src/worker/job_runners/config/parquet_and_info.py", line 1342, in compute_config_parquet_and_info_response
parquet_operations, partial, estimated_dataset_info = stream_convert_to_parquet(
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/src/services/worker/src/worker/job_runners/config/parquet_and_info.py", line 907, in stream_convert_to_parquet
builder._prepare_split(split_generator=splits_generators[split], file_format="parquet")
File "/usr/local/lib/python3.12/site-packages/datasets/builder.py", line 1736, in _prepare_split
for job_id, done, content in self._prepare_split_single(
^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.12/site-packages/datasets/builder.py", line 1919, in _prepare_split_single
raise DatasetGenerationError("An error occurred while generating the dataset") from e
datasets.exceptions.DatasetGenerationError: An error occurred while generating the datasetNeed help to make the dataset viewer work? Make sure to review how to configure the dataset viewer, and open a discussion for direct support.
context_tier string | documents list | query string | chosen dict | rejected dict | perturbation dict | detail_elements list | token_count int64 | sample_id string |
|---|---|---|---|---|---|---|---|---|
short | [
{
"doc_id": "GB_T_28053_2011",
"source": "gb_standard_reconstructed",
"segments": [
{
"segment_id": "GB_T_28053_2011_seg_0",
"text": "1 范围.1 残余变形率必须不超过37.8%。\n1 范围.2 残余变形率必须不超过74.5%。\n1 范围.3 残余变形率不应不超过49.8%。\n1 范围.4 爆破压力宜不低于公称工作压力的65.9倍。\n2 规范性引用文件.1 气瓶壁厚宜不小于71.7 MPa。\n2 规范性引用文件.2 ... | A fuel cell vehicle is equipped with Type IV cylinders rated at 10.8 bar. The fuel cell stack operates at -11°C and delivers 2.7 kW. Verify compliance with vehicle hydrogen system standards.
Referenced standards: 呼吸器用复合气瓶, 加氢机 通用技术要求, Energy Storage System Safety and Performance Standard — Emergency Procedures.
Specifically check numerical thresholds and limits, measurement units, scope of applicability, requirement obligation levels, conditional requirements. | {
"is_compliant": true,
"constraints": [
{
"type": "tau_4",
"description": "Requirement: .9 m, the equipment is recommended be within the range of 64.4 MPa for Typ",
"value": "is recommended",
"unit": null
},
{
"type": "tau_2",
"description": "Requirement: 文件.8 输氢管道材料应通过氢致延迟断裂试验,断裂韧性不低于97.9 MPa·m^(1/2)。\n3 术语和定义.1 输氢管道材料宜通过氢",
"value": "MPa",
"unit": "MPa"
},
{
"type": "tau_2",
"description": "Requirement: 射线检测。\n4 技术要求.2 管道输氢系统的设计压力宜不超过8.5 kW。\n4 技术要求.3 管道输氢系统的设计压力应不超过64.1",
"value": "kW",
"unit": "kW"
},
{
"type": "tau_2",
"description": "Requirement: 6 m。\n5 安全要求.1 管道输氢系统的设计压力不应不超过32.3 MPa。\n5 安全要求.2 长管拖车的最大充装压力不得为63.1 ",
"value": "MPa",
"unit": "MPa"
},
{
"type": "tau_1",
"description": "Requirement: 1.7 MPa。\n2 规范性引用文件.2 气瓶壁厚不应不小于51.9 MPa。\n2 规范性引用文件.3 气瓶的水压试验压力不得为公称工作",
"value": "51.9",
"unit": "MPa"
},
{
"type": "tau_4",
"description": "Requirement: \n9.6 the equipment must be fitted with automatic shutdown capab",
"value": "must",
"unit": null
},
{
"type": "tau_2",
"description": "Requirement: 7 检验规则.1 长管拖车的最大充装压力不得为85.1 m。\n7 检验规则.2 管道焊缝宜进行84%射线检测。\n7 检",
"value": "m",
"unit": "m"
},
{
"type": "tau_2",
"description": "Requirement: he equipment shall not exceed 23.9 μV/h for Type III and Type IV vess",
"value": "μV/h",
"unit": "μV/h"
}
],
"evidence": [
{
"segment_id": "SYNTH_0026_seg_0",
"quote": "2.1 If the defect depth exceeds 332.3% of wall thickness, the equipment may be maintained below 7.3 m for all stationary installations.\n2.2 Provided that the material thickness is at least 169.4 mm,"
},
{
"segment_id": "GB_T_40060_2021_seg_0",
"quote": "1 范围.1 运输车辆必须配备不少于15.2个压力传感器。\n1 范围.2 运输车辆宜配备不少于19.3个压力传感器。\n1 范围.3 管道焊缝宜进行108%射线检测。\n2 规范性引用文件.1 输氢管道材料不应通过氢致延迟断裂试验,断裂韧性不低于21.3 MPa·m^(1/2)。\n2 规范性引用文件.2 管道输氢系统的设计压力必须不超过96.2 kW。\n2 规范性引用文件.3 运输车辆必须配备不少于6"
},
{
"segment_id": "GB_T_40060_2021_seg_1",
"quote": "4 技术要求.1 管道焊缝宜进行110%射线检测。\n4 技术要求.2 管道输氢系统的设计压力宜不超过8.5 kW。\n4 技术要求.3 管道输氢系统的设计压力应不超过64.1 kW。\n4 技术要求.4 运输车辆不应配备不少于85.4个压力传感器。\n4 技术要求.5 运输车辆宜配备不少于54.3个压力传感器。\n4 技术要求.6 管道焊缝不得进行105%射线检测。\n4 技术要求.7 管道输氢系统的设计压"
},
{
"segment_id": "GB_T_28053_2011_seg_0",
"quote": "1 范围.1 残余变形率必须不超过37.8%。\n1 范围.2 残余变形率必须不超过74.5%。\n1 范围.3 残余变形率不应不超过49.8%。\n1 范围.4 爆破压力宜不低于公称工作压力的65.9倍。\n2 规范性引用文件.1 气瓶壁厚宜不小于71.7 MPa。\n2 规范性引用文件.2 气瓶壁厚不应不小于51.9 MPa。\n2 规范性引用文件.3 气瓶的水压试验压力不得为公称工作压力的16.5倍。\n"
},
{
"segment_id": "SYNTH_0026_seg_1",
"quote": "6.1 the equipment should be inspected by a qualified third party for indoor facilities.\n6.2 the equipment should not exceed 4.3 A/cm² for permanent installations.\n6.3 Where the hydrogen concentrati"
},
{
"segment_id": "GB_T_40060_2021_seg_2",
"quote": "7 检验规则.1 长管拖车的最大充装压力不得为85.1 m。\n7 检验规则.2 管道焊缝宜进行84%射线检测。\n7 检验规则.3 输氢管道材料不得通过氢致延迟断裂试验,断裂韧性不低于87.8 MPa·m^(1/2)。"
}
]
} | {
"is_compliant": true,
"constraints": [
{
"type": "tau_4",
"description": "Requirement: .9 m, the equipment is recommended be within the range of 64.4 MPa for Typ",
"value": "is recommended",
"unit": null
},
{
"type": "tau_2",
"description": "Requirement: 文件.8 输氢管道材料应通过氢致延迟断裂试验,断裂韧性不低于97.9 MPa·m^(1/2)。\n3 术语和定义.1 输氢管道材料宜通过氢",
"value": "MPa",
"unit": "MPa"
},
{
"type": "tau_2",
"description": "Requirement: 射线检测。\n4 技术要求.2 管道输氢系统的设计压力宜不超过8.5 kW。\n4 技术要求.3 管道输氢系统的设计压力应不超过64.1",
"value": "kW",
"unit": "kW"
},
{
"type": "tau_2",
"description": "Requirement: 6 m。\n5 安全要求.1 管道输氢系统的设计压力不应不超过32.6 MPa。\n5 安全要求.2 长管拖车的最大充装压力不得为63.1 ",
"value": "MPa",
"unit": "MPa"
},
{
"type": "tau_1",
"description": "Requirement: 1.7 MPa。\n2 规范性引用文件.2 气瓶壁厚不应不小于51.9 MPa。\n2 规范性引用文件.3 气瓶的水压试验压力不得为公称工作",
"value": "51.9",
"unit": "MPa"
},
{
"type": "tau_4",
"description": "Requirement: \n9.6 the equipment must be fitted with automatic shutdown capab",
"value": "must",
"unit": null
},
{
"type": "tau_2",
"description": "Requirement: 7 检验规则.1 长管拖车的最大充装压力不得为85.1 m。\n7 检验规则.2 管道焊缝宜进行84%射线检测。\n7 检",
"value": "m",
"unit": "m"
},
{
"type": "tau_2",
"description": "Requirement: he equipment shall not exceed 23.9 μV/h for Type III and Type IV vess",
"value": "μV/h",
"unit": "μV/h"
}
],
"evidence": [
{
"segment_id": "SYNTH_0026_seg_0",
"quote": "2.1 If the defect depth exceeds 332.3% of wall thickness, the equipment may be maintained below 7.3 m for all stationary installations.\n2.2 Provided that the material thickness is at least 169.4 mm,"
},
{
"segment_id": "GB_T_40060_2021_seg_0",
"quote": "1 范围.1 运输车辆必须配备不少于15.2个压力传感器。\n1 范围.2 运输车辆宜配备不少于19.3个压力传感器。\n1 范围.3 管道焊缝宜进行108%射线检测。\n2 规范性引用文件.1 输氢管道材料不应通过氢致延迟断裂试验,断裂韧性不低于21.3 MPa·m^(1/2)。\n2 规范性引用文件.2 管道输氢系统的设计压力必须不超过96.2 kW。\n2 规范性引用文件.3 运输车辆必须配备不少于6"
},
{
"segment_id": "GB_T_40060_2021_seg_1",
"quote": "4 技术要求.1 管道焊缝宜进行110%射线检测。\n4 技术要求.2 管道输氢系统的设计压力宜不超过8.5 kW。\n4 技术要求.3 管道输氢系统的设计压力应不超过64.1 kW。\n4 技术要求.4 运输车辆不应配备不少于85.4个压力传感器。\n4 技术要求.5 运输车辆宜配备不少于54.3个压力传感器。\n4 技术要求.6 管道焊缝不得进行105%射线检测。\n4 技术要求.7 管道输氢系统的设计压"
},
{
"segment_id": "GB_T_28053_2011_seg_0",
"quote": "1 范围.1 残余变形率必须不超过37.8%。\n1 范围.2 残余变形率必须不超过74.5%。\n1 范围.3 残余变形率不应不超过49.8%。\n1 范围.4 爆破压力宜不低于公称工作压力的65.9倍。\n2 规范性引用文件.1 气瓶壁厚宜不小于71.7 MPa。\n2 规范性引用文件.2 气瓶壁厚不应不小于51.9 MPa。\n2 规范性引用文件.3 气瓶的水压试验压力不得为公称工作压力的16.5倍。\n"
},
{
"segment_id": "SYNTH_0026_seg_1",
"quote": "6.1 the equipment should be inspected by a qualified third party for indoor facilities.\n6.2 the equipment should not exceed 4.3 A/cm² for permanent installations.\n6.3 Where the hydrogen concentrati"
},
{
"segment_id": "GB_T_40060_2021_seg_2",
"quote": "7 检验规则.1 长管拖车的最大充装压力不得为85.1 m。\n7 检验规则.2 管道焊缝宜进行84%射线检测。\n7 检验规则.3 输氢管道材料不得通过氢致延迟断裂试验,断裂韧性不低于87.8 MPa·m^(1/2)。"
}
]
} | {
"error_type": "tau_1_threshold",
"original_value": "2.3 MPa",
"perturbed_value": "2.6 MPa",
"detail_element_id": "7e75fe1c380a",
"segment_id": "GB_T_40060_2021_seg_1"
} | [
{
"element_id": "1906543a4059",
"type": "tau_1",
"value": "71.7",
"unit": "MPa",
"span": [
121,
129
],
"segment_id": "GB_T_28053_2011_seg_0",
"quote": "压力的65.9倍。\n2 规范性引用文件.1 气瓶壁厚宜不小于71.7 MPa。\n2 规范性引用文件.2 气瓶壁厚不应不小于51.9 MP",
"level": null
},
{
"element_id": "7... | 4,290 | train_00000 |
short | [{"doc_id":"SYNTH_0060","source":"synthetic","segments":[{"segment_id":"SYNTH_0060_seg_0","text":"1.(...TRUNCATED) | "A stationary storage facility stores hydrogen at 15.1 bar in Type IV vessels operating at 98°C. As(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: all stationary insta(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: all stationary insta(...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"7639.8 Nm³","perturbed_value":"9102.3 Nm³","deta(...TRUNCATED) | [{"element_id":"43e992dc06ec","type":"tau_1","value":"0.4","unit":"A","span":[58,63],"segment_id":"S(...TRUNCATED) | 5,900 | train_00001 |
short | [{"doc_id":"SYNTH_0060","source":"synthetic","segments":[{"segment_id":"SYNTH_0060_seg_0","text":"1.(...TRUNCATED) | "A fuel cell vehicle is equipped with Type III cylinders rated at 18.7 bar. The fuel cell stack oper(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: recommended not be (...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: recommended not be (...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"35 MPa","perturbed_value":"39 MPa","detail_element(...TRUNCATED) | [{"element_id":"43e992dc06ec","type":"tau_1","value":"0.4","unit":"A","span":[58,63],"segment_id":"S(...TRUNCATED) | 8,121 | train_00002 |
short | [{"doc_id":"GB_T_18487_1_2015","source":"gb_standard_reconstructed","segments":[{"segment_id":"GB_T_(...TRUNCATED) | "A hydrogen refuelling station dispenses hydrogen at 63.3 MPa with a flow rate of 186.2 Nm³/h. The (...TRUNCATED) | {"is_compliant":false,"constraints":[{"type":"tau_4","description":"Requirement: competent authority(...TRUNCATED) | {"is_compliant":false,"constraints":[{"type":"tau_4","description":"Requirement: competent authority(...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"2 kW","perturbed_value":"2 kW","detail_element_id"(...TRUNCATED) | [{"element_id":"46bc61685736","type":"tau_1","value":"14.6","unit":"Ω","span":[81,87],"segment_id":(...TRUNCATED) | 448,427 | train_00003 |
medium | [{"doc_id":"SYNTH_0111","source":"synthetic","segments":[{"segment_id":"SYNTH_0111_seg_0","text":"2.(...TRUNCATED) | "An electrolyser plant produces hydrogen at a purity of 99.579% and delivers it at 97.9 MPa to a ref(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: commended be maintai(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: commended be maintai(...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"8.2 W","perturbed_value":"7.2 W","detail_element_i(...TRUNCATED) | [{"element_id":"e3c0a86839b7","type":"tau_1","value":"27.0","unit":"mm","span":[133,140],"segment_id(...TRUNCATED) | 19,462 | train_00004 |
short | [{"doc_id":"SYNTH_0008","source":"synthetic","segments":[{"segment_id":"SYNTH_0008_seg_0","text":"1.(...TRUNCATED) | "A fleet operator transports compressed hydrogen via tube trailers at 93.6 bar, with each trailer ca(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_4","description":"Requirement: \nA.8 the equipment(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_4","description":"Requirement: \nA.8 the equipment(...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"3 W","perturbed_value":"4 W","detail_element_id":"(...TRUNCATED) | [{"element_id":"6214025d33c9","type":"tau_1","value":"414.9","unit":"ppm","span":[42,51],"segment_id(...TRUNCATED) | 8,068 | train_00005 |
short | [{"doc_id":"GB_T_33145_2016","source":"gb_standard_reconstructed","segments":[{"segment_id":"GB_T_33(...TRUNCATED) | "A stationary storage facility stores hydrogen at 96.0 MPa in Type II vessels operating at 117°C. A(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_3","description":"Requirement: 2963.4 kW for indoor(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_3","description":"Requirement: 2963.4 kW for indoor(...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"2 W","perturbed_value":"2 W","detail_element_id":"(...TRUNCATED) | [{"element_id":"8d35ee0c4416","type":"tau_1","value":"81.9","unit":"°C","span":[14,20],"segment_id"(...TRUNCATED) | 6,218 | train_00006 |
short | [{"doc_id":"EURLEX_32018L0844","source":"eurlex","segments":[{"segment_id":"EURLEX_32018L0844_seg_0"(...TRUNCATED) | "A rooftop installation facility stores hydrogen at 69.6 bar in composite overwrapped vessels operat(...TRUNCATED) | {"is_compliant":false,"constraints":[{"type":"tau_5","description":"Requirement: systems, if techni(...TRUNCATED) | {"is_compliant":false,"constraints":[{"type":"tau_5","description":"Requirement: systems, if techni(...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"22 m","perturbed_value":"25 m","detail_element_id"(...TRUNCATED) | [{"element_id":"0df38e1be741","type":"tau_1","value":"75","unit":"L","span":[108,112],"segment_id":"(...TRUNCATED) | 77,261 | train_00007 |
medium | [{"doc_id":"SYNTH_0123","source":"synthetic","segments":[{"segment_id":"SYNTH_0123_seg_0","text":"1.(...TRUNCATED) | "A fleet operator transports compressed hydrogen via tube trailers at 62.0 MPa, with each trailer ca(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_4","description":"Requirement: \n8.1 the equipment(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_4","description":"Requirement: \n8.1 the equipment(...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"2 W","perturbed_value":"2 W","detail_element_id":"(...TRUNCATED) | [{"element_id":"eb7795efb306","type":"tau_1","value":"332.7","unit":"Nm³","span":[30,39],"segment_i(...TRUNCATED) | 16,878 | train_00008 |
short | [{"doc_id":"CFR_49_199","source":"us_cfr","segments":[{"segment_id":"CFR_49_199_seg_0","text":"§ 19(...TRUNCATED) | "A hydrogen refuelling station dispenses hydrogen at 75.1 bar with a flow rate of 4.7 kg/h. The stat(...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: least six tests in (...TRUNCATED) | {"is_compliant":true,"constraints":[{"type":"tau_2","description":"Requirement: least six tests in (...TRUNCATED) | {"error_type":"tau_1_threshold","original_value":"50 %","perturbed_value":"41 %","detail_element_id"(...TRUNCATED) | [{"element_id":"98842ad753ec","type":"tau_1","value":"199.2","unit":"A","span":[242,249],"segment_id(...TRUNCATED) | 12,170 | train_00009 |
End of preview.