DreamSourceLab_DSLogic-hdl/src/i2c/serialInterface.v

//////////////////////////////////////////////////////////////////////
////                                                              ////
//// serialInterface.v                                                 ////
////                                                              ////
//// This file is part of the i2cSlave opencores effort.
//// <http://www.opencores.org/cores//>                           ////
////                                                              ////
//// Module Description:                                          ////
//// Perform all serial to parallel, and parallel
//// to serial conversions. Perform device address matching
//// Handle arbitrary length I2C reads terminated by NAK
//// from host, and arbitrary length I2C writes terminated
//// by STOP from host
//// The second byte of a I2C write is always interpreted
//// as a register address, and becomes the base register address
//// for all read and write transactions.
//// I2C WRITE:    devAddr, regAddr, data[regAddr], data[regAddr+1], ..... data[regAddr+N]
//// I2C READ:    data[regAddr], data[regAddr+1], ..... data[regAddr+N]
//// Note that when regAddR reaches 255 it will automatically wrap round to 0
////                                                              ////
//// To Do:                                                       ////
//// 
////                                                              ////
//// Author(s):                                                   ////
//// - Steve Fielding, sfielding@base2designs.com                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2008 Steve Fielding and OPENCORES.ORG          ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE. See the GNU Lesser General Public License for more  ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from <http://www.opencores.org/lgpl.shtml>                   ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
`include "i2cSlave_define.v"

module serialInterface (clearStartStopDet, clk, dataIn, dataOut, regAddr, rst, scl, sdaIn, sdaOut, startStopDetState, writeEn);
input   clk;
input   [7:0]dataIn;
input   rst;
input   scl;
input   sdaIn;
input   [1:0]startStopDetState;
output  clearStartStopDet;
output  [7:0]dataOut;
output  [7:0]regAddr;
output  sdaOut;
output  writeEn;

reg     clearStartStopDet, next_clearStartStopDet;
wire    clk;
wire    [7:0]dataIn;
reg     [7:0]dataOut, next_dataOut;
reg     [7:0]regAddr, next_regAddr;
wire    rst;
wire    scl;
wire    sdaIn;
reg     sdaOut, next_sdaOut;
wire    [1:0]startStopDetState;
reg     writeEn, next_writeEn;

// diagram signals declarations
reg  [2:0]bitCnt, next_bitCnt;
reg  [7:0]rxData, next_rxData;
reg  [1:0]streamSt, next_streamSt;
reg  [7:0]txData, next_txData;

// BINARY ENCODED state machine: SISt
// State codes definitions:
`define START 4'b0000
`define CHK_RD_WR 4'b0001
`define READ_RD_LOOP 4'b0010
`define READ_WT_HI 4'b0011
`define READ_CHK_LOOP_FIN 4'b0100
`define READ_WT_LO 4'b0101
`define READ_WT_ACK 4'b0110
`define WRITE_WT_LO 4'b0111
`define WRITE_WT_HI 4'b1000
`define WRITE_CHK_LOOP_FIN 4'b1001
`define WRITE_LOOP_WT_LO 4'b1010
`define WRITE_ST_LOOP 4'b1011
`define WRITE_WT_LO2 4'b1100
`define WRITE_WT_HI2 4'b1101
`define WRITE_CLR_WR 4'b1110
`define WRITE_CLR_ST_STOP 4'b1111

reg [3:0]CurrState_SISt, NextState_SISt;

// Diagram actions (continuous assignments allowed only: assign ...)
// diagram ACTION


// Machine: SISt

// NextState logic (combinatorial)
always @ (startStopDetState or streamSt or scl or txData or bitCnt or rxData or sdaIn or regAddr or dataIn or sdaOut or writeEn or dataOut or clearStartStopDet or CurrState_SISt)
begin
  NextState_SISt <= CurrState_SISt;
  // Set default values for outputs and signals
  next_streamSt <= streamSt;
  next_txData <= txData;
  next_rxData <= rxData;
  next_sdaOut <= sdaOut;
  next_writeEn <= writeEn;
  next_dataOut <= dataOut;
  next_bitCnt <= bitCnt;
  next_clearStartStopDet <= clearStartStopDet;
  next_regAddr <= regAddr;
  case (CurrState_SISt)  // synopsys parallel_case full_case
    `START:
    begin
      next_streamSt <= `STREAM_IDLE;
      next_txData <= 8'h00;
      next_rxData <= 8'h00;
      next_sdaOut <= 1'b1;
      next_writeEn <= 1'b0;
      next_dataOut <= 8'h00;
      next_bitCnt <= 3'b000;
      next_clearStartStopDet <= 1'b0;
      NextState_SISt <= `CHK_RD_WR;
    end
    `CHK_RD_WR:
    begin
      if (streamSt == `STREAM_READ)
      begin
        NextState_SISt <= `READ_RD_LOOP;
        next_txData <= dataIn;
        next_regAddr <= regAddr + 1'b1;
        next_bitCnt <= 3'b001;
      end
      else
      begin
        NextState_SISt <= `WRITE_WT_HI;
        next_rxData <= 8'h00;
      end
    end
    `READ_RD_LOOP:
    begin
      if (scl == 1'b0)
      begin
        NextState_SISt <= `READ_WT_HI;
        next_sdaOut <= txData [7];
        next_txData <= {txData [6:0], 1'b0};
      end
    end
    `READ_WT_HI:
    begin
      if (scl == 1'b1)
      begin
        NextState_SISt <= `READ_CHK_LOOP_FIN;
      end
    end
    `READ_CHK_LOOP_FIN:
    begin
      if (bitCnt == 3'b000)
      begin
        NextState_SISt <= `READ_WT_LO;
      end
      else
      begin
        NextState_SISt <= `READ_RD_LOOP;
        next_bitCnt <= bitCnt + 1'b1;
      end
    end
    `READ_WT_LO:
    begin
      if (scl == 1'b0)
      begin
        NextState_SISt <= `READ_WT_ACK;
        next_sdaOut <= 1'b1;
      end
    end
    `READ_WT_ACK:
    begin
      if (scl == 1'b1)
      begin
        NextState_SISt <= `CHK_RD_WR;
        if (sdaIn == `I2C_NAK)
        next_streamSt <= `STREAM_IDLE;
      end
    end
    `WRITE_WT_LO:
    begin
      if ((scl == 1'b0) && (startStopDetState == `STOP_DET || 
        (streamSt == `STREAM_IDLE && startStopDetState == `NULL_DET)))
      begin
        NextState_SISt <= `WRITE_CLR_ST_STOP;
        case (startStopDetState)
        `NULL_DET:
        next_bitCnt <= bitCnt + 1'b1;
        `START_DET: begin
        next_streamSt <= `STREAM_IDLE;
        next_rxData <= 8'h00;
        end
        default: ;
        endcase
        next_streamSt <= `STREAM_IDLE;
        next_clearStartStopDet <= 1'b1;
      end
      else if (scl == 1'b0)
      begin
        NextState_SISt <= `WRITE_ST_LOOP;
        case (startStopDetState)
        `NULL_DET:
        next_bitCnt <= bitCnt + 1'b1;
        `START_DET: begin
        next_streamSt <= `STREAM_IDLE;
        next_rxData <= 8'h00;
        end
        default: ;
        endcase
      end
    end
    `WRITE_WT_HI:
    begin
      if (scl == 1'b1)
      begin
        NextState_SISt <= `WRITE_WT_LO;
        next_rxData <= {rxData [6:0], sdaIn};
        next_bitCnt <= 3'b000;
      end
    end
    `WRITE_CHK_LOOP_FIN:
    begin
      if (bitCnt == 3'b111)
      begin
        NextState_SISt <= `WRITE_CLR_WR;
        next_sdaOut <= `I2C_ACK;
        case (streamSt)
        `STREAM_IDLE: begin
        if (rxData[7:1] == `I2C_ADDRESS &&
        startStopDetState == `START_DET) begin
        if (rxData[0] == 1'b1)
        next_streamSt <= `STREAM_READ;
        else
        next_streamSt <= `STREAM_WRITE_ADDR;
        end
        else
        next_sdaOut <= `I2C_NAK;
        end
        `STREAM_WRITE_ADDR: begin
        next_streamSt <= `STREAM_WRITE_DATA;
        next_regAddr <= rxData;
        end
        `STREAM_WRITE_DATA: begin
        next_dataOut <= rxData;
        next_writeEn <= 1'b1;
        end
        default:
        next_streamSt <= streamSt;
        endcase
      end
      else
      begin
        NextState_SISt <= `WRITE_ST_LOOP;
        next_bitCnt <= bitCnt + 1'b1;
      end
    end
    `WRITE_LOOP_WT_LO:
    begin
      if (scl == 1'b0)
      begin
        NextState_SISt <= `WRITE_CHK_LOOP_FIN;
      end
    end
    `WRITE_ST_LOOP:
    begin
      if (scl == 1'b1)
      begin
        NextState_SISt <= `WRITE_LOOP_WT_LO;
        next_rxData <= {rxData [6:0], sdaIn};
      end
    end
    `WRITE_WT_LO2:
    begin
      if (scl == 1'b0)
      begin
        NextState_SISt <= `CHK_RD_WR;
        next_sdaOut <= 1'b1;
      end
    end
    `WRITE_WT_HI2:
    begin
      next_clearStartStopDet <= 1'b0;
      if (scl == 1'b1)
      begin
        NextState_SISt <= `WRITE_WT_LO2;
      end
    end
    `WRITE_CLR_WR:
    begin
      if (writeEn == 1'b1)
      next_regAddr <= regAddr + 1'b1;
      next_writeEn <= 1'b0;
      next_clearStartStopDet <= 1'b1;
      NextState_SISt <= `WRITE_WT_HI2;
    end
    `WRITE_CLR_ST_STOP:
    begin
      next_clearStartStopDet <= 1'b0;
      NextState_SISt <= `CHK_RD_WR;
    end
  endcase
end

// Current State Logic (sequential)
always @ (posedge clk)
begin
  if (rst == 1'b1)
    CurrState_SISt <= `START;
  else
    CurrState_SISt <= NextState_SISt;
end

// Registered outputs logic
always @ (posedge clk)
begin
  if (rst == 1'b1)
  begin
    sdaOut <= 1'b1;
    writeEn <= 1'b0;
    dataOut <= 8'h00;
    clearStartStopDet <= 1'b0;
    // regAddr <=     // Initialization in the reset state or default value required!!
    streamSt <= `STREAM_IDLE;
    txData <= 8'h00;
    rxData <= 8'h00;
    bitCnt <= 3'b000;
  end
  else 
  begin
    sdaOut <= next_sdaOut;
    writeEn <= next_writeEn;
    dataOut <= next_dataOut;
    clearStartStopDet <= next_clearStartStopDet;
    regAddr <= next_regAddr;
    streamSt <= next_streamSt;
    txData <= next_txData;
    rxData <= next_rxData;
    bitCnt <= next_bitCnt;
  end
end

endmodule