#include "HMI.h"


/****************************************正弦波数组************************************/
const unsigned char SIN_TABLE[]={
0x7F,0x82,0x85,0x88,0x8B,0x8F,0x92,0x95,0x98,0x9B,0x9E,0xA1,0xA4,0xA7,0xAA,0xAD
,0xB0,0xB3,0xB6,0xB8,0xBB,0xBE,0xC1,0xC3,0xC6,0xC8,0xCB,0xCD,0xD0,0xD2,0xD5,0xD7
,0xD9,0xDB,0xDD,0xE0,0xE2,0xE4,0xE5,0xE7,0xE9,0xEB,0xEC,0xEE,0xEF,0xF1,0xF2,0xF4
,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFB,0xFC,0xFD,0xFD,0xFE,0xFE,0xFE,0xFE,0xFE
,0xFE,0xFE,0xFE,0xFE,0xFE,0xFE,0xFD,0xFD,0xFC,0xFB,0xFB,0xFA,0xF9,0xF8,0xF7,0xF6
,0xF5,0xF4,0xF2,0xF1,0xEF,0xEE,0xEC,0xEB,0xE9,0xE7,0xE5,0xE4,0xE2,0xE0,0xDD,0xDB
,0xD9,0xD7,0xD5,0xD2,0xD0,0xCD,0xCB,0xC8,0xC6,0xC3,0xC1,0xBE,0xBB,0xB8,0xB6,0xB3
,0xB0,0xAD,0xAA,0xA7,0xA4,0xA1,0x9E,0x9B,0x98,0x95,0x92,0x8F,0x8B,0x88,0x85,0x82
,0x7F,0x7C,0x79,0x76,0x73,0x6F,0x6C,0x69,0x66,0x63,0x60,0x5D,0x5A,0x57,0x54,0x51
,0x4E,0x4B,0x48,0x46,0x43,0x40,0x3D,0x3B,0x38,0x36,0x33,0x31,0x2E,0x2C,0x29,0x27
,0x25,0x23,0x21,0x1E,0x1C,0x1A,0x19,0x17,0x15,0x13,0x12,0x10,0x0F,0x0D,0x0C,0x0A
,0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x03,0x02,0x01,0x01,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x02,0x03,0x03,0x04,0x05,0x06,0x07,0x08
,0x09,0x0A,0x0C,0x0D,0x0F,0x10,0x12,0x13,0x15,0x17,0x19,0x1A,0x1C,0x1E,0x21,0x23
,0x25,0x27,0x29,0x2C,0x2E,0x31,0x33,0x36,0x38,0x3B,0x3D,0x40,0x43,0x46,0x48,0x4B
,0x4E,0x51,0x54,0x57,0x5A,0x5D,0x60,0x63,0x66,0x69,0x6C,0x6F,0x73,0x76,0x79,0x7C};

char FINISH[3]={0XFF,0XFF,0XFF};
//******************************************
//函数名称：HMICommandPut
//函数功能：串口输出指令	使用UART4
//参    数：const uint8_t *Data	-- 字符串数据
//返还值：  无
//******************************************
void HMICommandPut(const char *Data)
{
	UARTprintf(1,"%s",Data);
	UARTprintf(1,FINISH);
}

//******************************************
//函数名称：HMIDrawCurve
//函数功能：绘制曲线	使用UART4
//参    数：int Num   --曲线中包含点的个数
//		    const uint8_t *Data -- 数据存放数组的首地址
//返还值：  无
//******************************************
void HMIDrawCurve(const unsigned char *Data ,int Num)
{
	int index;
	uint16_t temp;
	
	for(index=0;index<Num;index++)
	{	
		char str[14] = {0};
		temp = (uint16_t)((*(Data+index))/2+60);
		sprintf(str,"add 10,0,%d",temp);	//曲线ID号：10 通道：0
		HMICommandPut(str);
	}
		
}

//******************************************
//函数名称：HMIShowText
//函数功能：显示指定的文本内容
//参    数：			int TextNum	 ----文本在串口屏中的的序号
//					uint8_t *Data			 ----要显示内容的首地址
//					int Len   	 	 ----内容字符串的长度
//返还值：  无
//******************************************
void HMIShowText(int TextNum, const char *Data)
{
	char str[30]={0};
	
	sprintf(str,"t%d.txt=\"%s\"",TextNum,Data);	
	HMICommandPut(str);
}