#!/usr/bin/env python3 """COMPUTATION lane — Simple Time Tracker. INPUT -> OUTPUT: this lane owns jump_kind="value". The app's core transform is the manual add-record / edit-record screen, where the preview card's DURATION is recomputed from the Start/End time-adjust chips (-30 -5 -1 +1 +5 +30). That preview duration `tvRecordItemDuration` is DUMP-READABLE (unlike the running-timer card, which is canvas-only). A second derived surface is the Statistics tab: with exactly one record, the sole activity's percent is "100%" and the "Total tracked" duration equals that record's duration. GROUND TRUTH established live on the running original (v1.58 debug): - Records tab exposes btnRecordsContainerAdd only once a record EXISTS (empty Records reports the Timers page — a ViewPager quirk). So every test seeds one real start->stop record first, then opens manual-add / edit. - The time-adjust chips repeat TWICE: the FIRST row (LOWER y) is Start, the SECOND row (HIGHER y) is End. Verified: * End +5 -> +5 min (0m->5m->10m) * End +30 -> +30 min * End -5 -> -5 min ; End -30 -> -30 min (only when there is headroom) * Start +5 -> -5 min (moves start later, interval SHRINKS) * Start -5 -> +5 min ; Start -30 -> +30 min * combos compose (End+30 twice -> +60, "1h 0m"->"2h 0m") - *** The duration CLAMPS at 0 *** and the manual-add INITIAL duration is NON-DETERMINISTIC (observed both "0m" and "1h 0m" on fresh opens). So NO test asserts an absolute start value; every value test reads the BEFORE duration, applies chips, reads the AFTER duration, parses both to minutes and asserts the signed DELTA. Any test that DECREASES the duration first raises it with End +30 (`prep`) so the change has room to move (a decrease from 0m would be swallowed by the clamp — a real, observed behaviour, not a test bug). - Manual-add SAVE (no activity chosen) persists an "Untracked" row whose tvRecordItemDuration equals the value that was set (End+5x2 -> "10m" row). - Edit a record row: same screen pre-filled; End+5 turns the preview 0m->5m and, after Save, the row itself 0m->5m. - Statistics (one record of "Stat1"): tvStatisticsItemPercent="100%", tvStatisticsItemDuration matches the record, plus a "Total tracked" row whose duration equals it. TWO records edited to ~30m each split the pie ~51%/49% into two differently-coloured donut halves. DUMPS ARE SLOW on this emulator, so every test minimises ui() calls, opens its OWN entry point (clear_data + launch), seeds its own data inline, and any test that starts a timer stops it. Nothing depends on a previous test's leftovers. """ import os import sys sys.path.insert(0, os.path.dirname(os.path.abspath(__file__))) from android_testgen_kit import * # noqa: F403,E402 PACKAGE = sys.argv[1] if len(sys.argv) > 1 else os.environ.get("PACKAGE", "") RESULTS_DIR = (sys.argv[2] if len(sys.argv) > 2 else os.environ.get("RESULTS_DIR", os.path.dirname(os.path.abspath(__file__)))) init(module="computation", package=PACKAGE, results_dir=RESULTS_DIR) # ── local recipes (from recon; kit-only, nothing hardcoded) ──────────────────── def tile(nodes, label): """The clickable tile CONTAINER whose bounds enclose the name TextView.""" name = next((n for n in nodes if (n.get("text") or "") == label and (n.get("resource-id") or "").endswith("tvRecordTypeItemName")), None) if not name: return None nb = name["_bounds"] for n in nodes: if (n.get("resource-id") or "").endswith("viewRecordTypeItem") \ and n.get("clickable") == "true": b = n["_bounds"] if b[0] <= nb[0] and b[2] >= nb[2] and b[1] <= nb[1] and b[3] >= nb[3]: return n return None def tab_trigger(nodes, desc): return next((n for n in nodes if (n.get("content-desc") or "") == desc), None) def goto_tab(desc): t = tab_trigger(ui(), desc) if t: tap_node(t) settle("nav") settle("nav") return ui() def open_fresh(): """Clean ENTRY POINT: a virgin DB + a fresh launch. Only setup — every value below is driven by a real in-app tap and read from a fresh dump.""" clear_data() launch_app() wait_for_foreground() settle("launch") return ui() def create_activity(name): """From the Timers tab: Add tile -> type name -> SAVE. Leaves you on Timers.""" tap_node(tile(ui(), "Add")) settle("nav") type_text(node_by_id(ui(), "etChangeRecordTypeName"), name) hide_keyboard() tap_node(node_by_id(ui(), "btnChangeRecordTypeSave")) settle("nav") return ui() def start_timer(name): t = tile(ui(), name) if not t: return False tap_node(t) settle("nav") return True def stop_timer(): """Tap the CANVAS running card at the top of rvRunningRecordsList to STOP.""" rv = node_by_id(ui(), "rvRunningRecordsList") if not rv: return False s = get_screen_info() tap(s["center_x"], rv["_bounds"][1] + 90) settle("nav") settle("nav") return True def seed_record(name): """Create `name`, then start+stop once so a completed record exists AND the Records tab's tree materialises.""" create_activity(name) if not start_timer(name): return False return stop_timer() def duration_text(nodes=None): """The preview / row duration string, e.g. '3m', '1h 5m', '2h 0m'.""" nodes = ui() if nodes is None else nodes return next((n.get("text") for n in nodes if (n.get("resource-id") or "").endswith("tvRecordItemDuration")), None) def dur_to_min(s): """Parse 'Xh Ym' / 'Xh' / 'Xh 0m' / 'Ym' / '45m' (stray whitespace ok) into integer minutes. Returns None if nothing parseable.""" if not s: return None s = s.strip().lower() total = 0 seen = False h = re.search(r"(\d+)\s*h", s) if h: total += int(h.group(1)) * 60 seen = True m = re.search(r"(\d+)\s*m", s) if m: total += int(m.group(1)) seen = True if not seen: # bare number (rare) -> minutes b = re.search(r"(\d+)", s) if b: return int(b.group(1)) return None return total def _chip(txt, which): """Return the Start (which='start', FIRST/lower-y row) or End (which='end', SECOND/higher-y row) time-adjust chip with the given label, from a FRESH dump.""" xs = sorted([n for n in ui() if n.get("text") == txt and (n.get("resource-id") or "").endswith("tvTimeAdjustmentItem")], key=lambda z: z["_bounds"][1]) if len(xs) < 2: return None return xs[0] if which == "start" else xs[-1] def tap_chip(txt, which): c = _chip(txt, which) if not c: return False tap_node(c) settle("nav") return True def record_row_by_name(name): """The clickable viewRecordItem row whose enclosed tvRecordItemName == name.""" nodes = ui() nm = next((n for n in nodes if (n.get("resource-id") or "").endswith("tvRecordItemName") and n.get("text") == name), None) if not nm: return None nb = nm["_bounds"] for n in nodes: if (n.get("resource-id") or "").endswith("viewRecordItem"): b = n["_bounds"] if b[1] <= nb[1] and b[3] >= nb[3]: return n return None # ── depth-backing entry points (NAME backs the depth claim) ──────────────────── def and_reach_records(): """Timers -> Records tab; confirm the jump via the Records-only anchor btnRecordsContainerAdd. Records' tree exists only after a record does.""" t = tab_trigger(ui(), "Records") if not t: return False tap_node(t) settle("nav") settle("nav") and_enter("records") return node_by_id(ui(), "btnRecordsContainerAdd") is not None def and_enter_manual_add_record(): """Records tab -> manual add-record screen via btnRecordsContainerAdd. NAME backs the depth; confirms the preview duration + Save landed on the new surface. Returns the BEFORE duration string, or None if unreachable.""" add = node_by_id(ui(), "btnRecordsContainerAdd") if not add or not tap_node(add): return None settle("nav") and_enter("manual_add_record") if node_by_id(ui(), "btnChangeRecordSave") is None: return None return duration_text() def and_enter_edit_record(name=None): """Records tab -> record-edit screen. If `name` is given, open THAT record's row; otherwise the first viewRecordItem. NAME backs the depth; confirms Save landed. Returns the BEFORE preview duration, or None if unreachable.""" row = record_row_by_name(name) if name else node_by_id(ui(), "viewRecordItem") if not row or not tap_node(row): return None settle("nav") and_enter("edit_record") if node_by_id(ui(), "btnChangeRecordSave") is None: return None return duration_text() def bump_record_end30(name): """From the Records tab: open `name`'s row, apply End +30, Save. Returns True on success. Used to give a record a non-trivial, comparable duration.""" if not and_reach_records(): return False if and_enter_edit_record(name) is None: return False if not tap_chip("+30", "end"): return False save = node_by_id(ui(), "btnChangeRecordSave") if not save or not tap_node(save): return False settle("nav") settle("nav") return True def _delta_via_chips(chips, prep=None): """Shared driver: seed a record, open manual-add, optionally apply `prep` chips FIRST (to build headroom — the app CLAMPS duration at 0, so a decrease from a non-deterministic '0m' start would be swallowed), read the BEFORE duration, then apply `chips` in order and read AFTER. Returns (ok_setup, before_str, after_str, before_min, after_min). ok_setup is False if setup was unreachable, None if a feature/chip was missing, True on success.""" prep = prep or [] if not seed_record("Kc" + str(abs(hash(tuple(chips) + tuple(prep))) % 9999)): return (False, None, None, None, None) if not and_reach_records(): return (False, None, None, None, None) if and_enter_manual_add_record() is None: return (None, None, None, None, None) # feature_missing sentinel # Build headroom BEFORE measuring the baseline, so a decrease has room to move. for (label, which) in prep: if not tap_chip(label, which): return (None, None, None, None, None) before = duration_text() bmin = dur_to_min(before) for (label, which) in chips: if not tap_chip(label, which): return (None, before, None, bmin, None) after = duration_text() return (True, before, after, bmin, dur_to_min(after)) def _assert_delta(name, chips, expected_delta, expect_desc, prep=None): """Author a value test that applies `chips` on the manual-add screen (after an optional `prep` to build headroom) and asserts after_min - before_min == expected_delta (a parsed minute delta measured from the post-prep baseline).""" ok_setup, before, after, bmin, amin = _delta_via_chips(chips, prep=prep) if ok_setup is False: record(name, False, "setup_failed: could not seed a record / reach the Records add screen", depth=1, jump_kind="value", expect=expect_desc) return if ok_setup is None: record(name, False, "feature_missing: manual add-record screen or a required time chip " "was not present", depth=1, jump_kind="value", expect=expect_desc) return if bmin is None or amin is None: record(name, False, f"behavior_wrong: could not parse duration (before={before!r}, " f"after={after!r})", depth=1, jump_kind="value", expect=expect_desc) return delta = amin - bmin ok = delta == expected_delta record(name, ok, "" if ok else f"behavior_wrong: duration delta was {delta:+d} min " f"(before={before!r}->{bmin}, after={after!r}->{amin}), expected " f"{expected_delta:+d}", depth=1, jump_kind="value", expect=f"{expect_desc} (before={before!r}/{bmin}m -> after={after!r}/" f"{amin}m, delta={expected_delta:+d}m)") # ══════════════════════════════════════════════════════════════════════════════ # 1. End +5 once -> +5 min # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_end_plus5",)) def test_end_plus5(): open_fresh() _assert_delta("computation_end_plus5", [("+5", "end")], +5, "End +5 raises the preview duration by 5 minutes") # ══════════════════════════════════════════════════════════════════════════════ # 2. End +5 twice -> +10 min # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_end_plus5_twice",)) def test_end_plus5_twice(): open_fresh() _assert_delta("computation_end_plus5_twice", [("+5", "end"), ("+5", "end")], +10, "End +5 applied twice raises the duration by 10 minutes") # ══════════════════════════════════════════════════════════════════════════════ # 3. End +30 -> +30 min # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_end_plus30",)) def test_end_plus30(): open_fresh() _assert_delta("computation_end_plus30", [("+30", "end")], +30, "End +30 raises the duration by 30 minutes") # ══════════════════════════════════════════════════════════════════════════════ # 4. End -5 -> -5 min (after raising with End +30 for headroom; app clamps at 0) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_end_minus5",)) def test_end_minus5(): open_fresh() _assert_delta("computation_end_minus5", [("-5", "end")], -5, "End -5 lowers the duration by 5 minutes", prep=[("+30", "end")]) # ══════════════════════════════════════════════════════════════════════════════ # 5. End -30 -> -30 min (headroom = End +30 twice) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_end_minus30",)) def test_end_minus30(): open_fresh() _assert_delta("computation_end_minus30", [("-30", "end")], -30, "End -30 lowers the duration by 30 minutes", prep=[("+30", "end"), ("+30", "end")]) # ══════════════════════════════════════════════════════════════════════════════ # 6. Start +5 -> -5 min (moving Start later SHRINKS the interval; headroom needed) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_start_plus5_shrinks",)) def test_start_plus5(): open_fresh() _assert_delta("computation_start_plus5_shrinks", [("+5", "start")], -5, "Start +5 moves the start later so the duration DROPS by 5 minutes", prep=[("+30", "end")]) # ══════════════════════════════════════════════════════════════════════════════ # 7. Start -5 -> +5 min (moving Start earlier LENGTHENS the interval) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_start_minus5_grows",)) def test_start_minus5(): open_fresh() _assert_delta("computation_start_minus5_grows", [("-5", "start")], +5, "Start -5 moves the start earlier so the duration GROWS by 5 minutes") # ══════════════════════════════════════════════════════════════════════════════ # 8. Start -30 -> +30 min # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_start_minus30_grows",)) def test_start_minus30(): open_fresh() _assert_delta("computation_start_minus30_grows", [("-30", "start")], +30, "Start -30 grows the duration by 30 minutes") # ══════════════════════════════════════════════════════════════════════════════ # 9. Combo: End +30 then End -5 -> +25 min (chips compose) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_combo_end_plus30_minus5",)) def test_combo_end_plus30_minus5(): open_fresh() _assert_delta("computation_combo_end_plus30_minus5", [("+30", "end"), ("-5", "end")], +25, "End +30 then End -5 composes to a +25 minute net change") # ══════════════════════════════════════════════════════════════════════════════ # 10. Combo: End +5 then Start +5 -> 0 net (equal & opposite -> unchanged) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_combo_net_zero",)) def test_combo_net_zero(): open_fresh() _assert_delta("computation_combo_net_zero", [("+5", "end"), ("+5", "start")], 0, "End +5 then Start +5 cancel to a net 0 minute change") # ══════════════════════════════════════════════════════════════════════════════ # 11. Combo: End +30 twice -> +60 min (crosses into the 'Xh Ym' hour formatting) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_combo_plus60_hour_format",)) def test_combo_plus60(): open_fresh() ok_setup, before, after, bmin, amin = _delta_via_chips( [("+30", "end"), ("+30", "end")]) exp = "End +30 twice adds 60 minutes and the duration crosses into 'Xh' format" if ok_setup is False: record("computation_combo_plus60_hour_format", False, "setup_failed: could not seed a record / reach the Records add screen", depth=1, jump_kind="value", expect=exp) return if ok_setup is None: record("computation_combo_plus60_hour_format", False, "feature_missing: manual add-record screen or End +30 chip missing", depth=1, jump_kind="value", expect=exp) return if bmin is None or amin is None: record("computation_combo_plus60_hour_format", False, f"behavior_wrong: unparseable duration (before={before!r}, after={after!r})", depth=1, jump_kind="value", expect=exp) return delta_ok = (amin - bmin) == 60 # after MUST render an hour component ('h'): +60 min from a non-negative base # always tips the total to >= 1h. hour_ok = "h" in (after or "").lower() ok = delta_ok and hour_ok record("computation_combo_plus60_hour_format", ok, "" if ok else f"behavior_wrong: +60 combo gave delta {amin - bmin:+d} min " f"(before={before!r}->{bmin}, after={after!r}->{amin}), hour_format={hour_ok}", depth=1, jump_kind="value", expect=f"{exp} (before={before!r}/{bmin}m -> after={after!r}/{amin}m)") # ══════════════════════════════════════════════════════════════════════════════ # 12. Combo: End +30 then Start +30 -> 0 net (30-min chips cancel across rows) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_combo_30_net_zero",)) def test_combo_30_net_zero(): open_fresh() _assert_delta("computation_combo_30_net_zero", [("+30", "end"), ("+30", "start")], 0, "End +30 then Start +30 cancel to a net 0 minute change") # ══════════════════════════════════════════════════════════════════════════════ # 13. Manual-add SAVE round-trip: set End+5x2 -> Save -> the saved 'Untracked' row's # duration equals the value that was set (delta +10 vs the pre-save preview). # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_manual_save_roundtrip",)) def test_manual_save_roundtrip(): open_fresh() exp = "the saved record row duration equals the End+5x2 preview value" if not seed_record("KcSave"): record("computation_manual_save_roundtrip", False, "setup_failed: could not seed a record to make Records render", depth=1, jump_kind="value", expect=exp) return if not and_reach_records(): record("computation_manual_save_roundtrip", False, "setup_failed: Records tab did not expose the manual-add button", depth=1, jump_kind="value", expect=exp) return before = and_enter_manual_add_record() if before is None: record("computation_manual_save_roundtrip", False, "feature_missing: manual add-record screen has no Save/preview", depth=1, jump_kind="value", expect=exp) return bmin = dur_to_min(before) if not (tap_chip("+5", "end") and tap_chip("+5", "end")): record("computation_manual_save_roundtrip", False, "feature_missing: End +5 time chip missing on manual-add", depth=1, jump_kind="value", expect=exp) return preview = duration_text() pmin = dur_to_min(preview) # SAVE and read the new row back on the Records list. tap_node(node_by_id(ui(), "btnChangeRecordSave")) settle("nav") settle("nav") nodes = ui() rows = [n for n in nodes if (n.get("resource-id") or "").endswith("tvRecordItemDuration")] saved_min = None for r in rows: if dur_to_min(r.get("text")) == pmin: saved_min = pmin break ok = (pmin is not None and bmin is not None and (pmin - bmin) == 10 and saved_min == pmin) record("computation_manual_save_roundtrip", ok, "" if ok else "behavior_wrong: saved row duration did not match the set " f"preview (before={before!r}/{bmin}, preview={preview!r}/{pmin}, " f"saved_row_min={saved_min}, row_durs={[r.get('text') for r in rows]})", depth=1, jump_kind="value", expect=f"{exp} (preview={preview!r}/{pmin}m persisted as a row of {pmin}m)") # ══════════════════════════════════════════════════════════════════════════════ # 14. EDIT record: apply End +5 on the pre-filled screen -> preview delta +5, and # after Save the row itself moves by +5. (depth 1: edit_record surface) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_edit_record_end_plus5",)) def test_edit_record_end_plus5(): open_fresh() exp = "editing End +5 raises the record's preview duration and saved row by 5m" if not seed_record("KcEdit"): record("computation_edit_record_end_plus5", False, "setup_failed: could not seed a record to edit", depth=1, jump_kind="value", expect=exp) return if not and_reach_records(): record("computation_edit_record_end_plus5", False, "setup_failed: Records tab did not render", depth=1, jump_kind="value", expect=exp) return row_before = duration_text() rbmin = dur_to_min(row_before) before = and_enter_edit_record() if before is None: record("computation_edit_record_end_plus5", False, "feature_missing: record row not editable (no Save on edit screen)", depth=1, jump_kind="value", expect=exp) return bmin = dur_to_min(before) if not tap_chip("+5", "end"): record("computation_edit_record_end_plus5", False, "feature_missing: End +5 chip absent on the edit screen", depth=1, jump_kind="value", expect=exp) return preview = duration_text() pmin = dur_to_min(preview) preview_ok = (bmin is not None and pmin is not None and (pmin - bmin) == 5) # Save and confirm the persisted row moved by +5 vs. its pre-edit value. tap_node(node_by_id(ui(), "btnChangeRecordSave")) settle("nav") settle("nav") row_after = duration_text() ramin = dur_to_min(row_after) row_ok = (rbmin is not None and ramin is not None and (ramin - rbmin) == 5) ok = preview_ok and row_ok record("computation_edit_record_end_plus5", ok, "" if ok else "behavior_wrong: End +5 edit did not add 5 min " f"(preview {before!r}/{bmin}->{preview!r}/{pmin}; " f"row {row_before!r}/{rbmin}->{row_after!r}/{ramin})", depth=1, jump_kind="value", expect=f"{exp} (preview +5: {before!r}->{preview!r}; " f"row +5: {row_before!r}->{row_after!r})") # ══════════════════════════════════════════════════════════════════════════════ # 15. STATISTICS derived value: with exactly ONE record, the sole activity's # percent == '100%'. (depth 1: statistics tab surface) # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_stats_single_percent_100",)) def test_stats_single_percent(): open_fresh() exp = "the sole activity's statistics percent reads '100%'" if not seed_record("KcStatP"): record("computation_stats_single_percent_100", False, "setup_failed: could not seed the single record", depth=1, jump_kind="value", expect=exp) return goto_tab("Statistics") and_enter("statistics") percents = [n.get("text") for n in ui() if (n.get("resource-id") or "").endswith("tvStatisticsItemPercent")] ok = percents == ["100%"] record("computation_stats_single_percent_100", ok, "" if ok else f"behavior_wrong: single-record percents were {percents!r}, " "expected exactly ['100%']", depth=1, jump_kind="value", expect=f"{exp} (observed percents={percents!r})") # ══════════════════════════════════════════════════════════════════════════════ # 16. STATISTICS derived value: 'Total tracked' duration EQUALS the sole record's # duration (the aggregate equals its only input). [+ VLM pie-chart proportion] # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_stats_total_equals_record", "computation_stats_single_slice_vlm")) def test_stats_total_equals_record(): open_fresh() exp = "'Total tracked' duration equals the single activity's duration" if not seed_record("KcStatT"): record("computation_stats_total_equals_record", False, "setup_failed: could not seed the single record", depth=1, jump_kind="value", expect=exp) vlm_assert("computation_stats_single_slice", "unreachable", RESULTS_DIR, expect="YES", depth=1, jump_kind="none", tag="shape") return goto_tab("Statistics") and_enter("statistics") nodes = ui() # Both the activity legend row AND the 'Total tracked' row use tvStatisticsItemName; # pair each name with its nearest duration by y-order. names = [n for n in nodes if (n.get("resource-id") or "").endswith("tvStatisticsItemName")] durs = [n for n in nodes if (n.get("resource-id") or "").endswith("tvStatisticsItemDuration")] total_min = activity_min = None for nm in names: cand = sorted(durs, key=lambda d: abs(d["_bounds"][1] - nm["_bounds"][1])) if not cand: continue val = dur_to_min(cand[0].get("text")) if (nm.get("text") or "").strip().lower() == "total tracked": total_min = val else: activity_min = val ok = (total_min is not None and activity_min is not None and total_min == activity_min) record("computation_stats_total_equals_record", ok, "" if ok else "behavior_wrong: Total tracked did not equal the sole " f"record's duration (total={total_min}m, activity={activity_min}m, " f"durs={[d.get('text') for d in durs]})", depth=1, jump_kind="value", expect=f"{exp} (total={total_min}m == activity={activity_min}m)") # VLM: the pie chart is a canvas view (not in the dump). With one record it must # render as a single solid slice filling essentially the whole donut ring. vlm_assert("computation_stats_single_slice", "Does the circular donut chart consist of a SINGLE solid colour " "filling the whole ring (one activity at 100%), with NO second " "differently-coloured segment?", RESULTS_DIR, expect="YES", depth=1, jump_kind="value", tag="color") # ══════════════════════════════════════════════════════════════════════════════ # 17. STATISTICS with TWO comparable records: the donut splits into two distinct # coloured halves. Each seeded record is edited to ~30m so the split is ~51/49 # (dump-confirmed) — a rendered proportion unreadable from the dump. [VLM] # ══════════════════════════════════════════════════════════════════════════════ @and_test(expects=("computation_stats_two_slices_vlm",)) def test_stats_two_slices(): open_fresh() create_activity("KcTwoA") create_activity("KcTwoB") okA = start_timer("KcTwoA") and stop_timer() okB = start_timer("KcTwoB") and stop_timer() if not (okA and okB): vlm_assert("computation_stats_two_slices", "unreachable", RESULTS_DIR, expect="YES", depth=1, jump_kind="none", tag="shape") return # Give BOTH records a comparable, non-trivial duration (~30m) so neither slice # is an invisible sliver — a near-instant start->stop rounds to 0m otherwise. okbA = bump_record_end30("KcTwoA") okbB = bump_record_end30("KcTwoB") if not (okbA and okbB): vlm_assert("computation_stats_two_slices", "unreachable", RESULTS_DIR, expect="YES", depth=1, jump_kind="none", tag="shape") return goto_tab("Statistics") and_enter("statistics") vlm_assert("computation_stats_two_slices", "Is the circular donut chart split into TWO clearly different colours " "(two roughly-equal segments for two activities), rather than a single " "solid-colour ring?", RESULTS_DIR, expect="YES", depth=1, jump_kind="value", tag="color") TESTS = [ test_end_plus5, test_end_plus5_twice, test_end_plus30, test_end_minus5, test_end_minus30, test_start_plus5, test_start_minus5, test_start_minus30, test_combo_end_plus30_minus5, test_combo_net_zero, test_combo_plus60, test_combo_30_net_zero, test_manual_save_roundtrip, test_edit_record_end_plus5, test_stats_single_percent, test_stats_total_equals_record, test_stats_two_slices, ] if __name__ == "__main__": if not device_online(): print("Device not online — aborting.") sys.exit(1) run_suite(TESTS, "computation")